Antminer s17e >3800w

Answered

Comments

12 comments

    All boards in:

     

    Booting Linux on physical CPU 0x0
    Linux version 4.6.0-xilinx-gff8137b-dirty (lzq@armdev2) (gcc version 4.8.3 20140320 (prerelease) (Sourcery CodeBench Lite 2014.05-23) ) #25 SMP PREEMPT Fri Nov 23 15:30:52 CST 2018
    CPU: ARMv7 Processor [413fc090] revision 0 (ARMv7), cr=18c5387d
    CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
    Machine model: Xilinx Zynq
    cma: Reserved 16 MiB at 0x0e000000
    Memory policy: Data cache writealloc
    On node 0 totalpages: 61440
    free_area_init_node: node 0, pgdat c0b39280, node_mem_map cde10000
    Normal zone: 480 pages used for memmap
    Normal zone: 0 pages reserved
    Normal zone: 61440 pages, LIFO batch:15
    percpu: Embedded 12 pages/cpu @cddf1000 s19776 r8192 d21184 u49152
    pcpu-alloc: s19776 r8192 d21184 u49152 alloc=12*4096
    pcpu-alloc: [0] 0 [0] 1
    Built 1 zonelists in Zone order, mobility grouping on. Total pages: 60960
    Kernel command line: mem=240M console=ttyPS0,115200 ramdisk_size=33554432 root=/dev/ram rw earlyprintk
    PID hash table entries: 1024 (order: 0, 4096 bytes)
    Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
    Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
    Memory: 195688K/245760K available (6345K kernel code, 231K rwdata, 1896K rodata, 1024K init, 223K bss, 33688K reserved, 16384K cma-reserved, 0K highmem)
    Virtual kernel memory layout:
    vector : 0xffff0000 - 0xffff1000 ( 4 kB)
    fixmap : 0xffc00000 - 0xfff00000 (3072 kB)
    vmalloc : 0xcf800000 - 0xff800000 ( 768 MB)
    lowmem : 0xc0000000 - 0xcf000000 ( 240 MB)
    pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
    modules : 0xbf000000 - 0xbfe00000 ( 14 MB)
    .text : 0xc0008000 - 0xc090c424 (9234 kB)
    .init : 0xc0a00000 - 0xc0b00000 (1024 kB)
    .data : 0xc0b00000 - 0xc0b39fe0 ( 232 kB)
    .bss : 0xc0b39fe0 - 0xc0b71c28 ( 224 kB)
    Preemptible hierarchical RCU implementation.
    Build-time adjustment of leaf fanout to 32.
    RCU restricting CPUs from NR_CPUS=4 to nr_cpu_ids=2.
    RCU: Adjusting geometry for rcu_fanout_leaf=32, nr_cpu_ids=2
    NR_IRQS:16 nr_irqs:16 16
    efuse mapped to cf800000
    ps7-slcr mapped to cf802000
    L2C: platform modifies aux control register: 0x72360000 -> 0x72760000
    L2C: DT/platform modifies aux control register: 0x72360000 -> 0x72760000
    L2C-310 erratum 769419 enabled
    L2C-310 enabling early BRESP for Cortex-A9
    L2C-310 full line of zeros enabled for Cortex-A9
    L2C-310 ID prefetch enabled, offset 1 lines
    L2C-310 dynamic clock gating enabled, standby mode enabled
    L2C-310 cache controller enabled, 8 ways, 512 kB
    L2C-310: CACHE_ID 0x410000c8, AUX_CTRL 0x76760001
    zynq_clock_init: clkc starts at cf802100
    Zynq clock init
    sched_clock: 64 bits at 333MHz, resolution 3ns, wraps every 4398046511103ns
    clocksource: arm_global_timer: mask: 0xffffffffffffffff max_cycles: 0x4ce07af025, max_idle_ns: 440795209040 ns
    Switching to timer-based delay loop, resolution 3ns
    clocksource: ttc_clocksource: mask: 0xffff max_cycles: 0xffff, max_idle_ns: 537538477 ns
    ps7-ttc #0 at cf80a000, irq=18
    Console: colour dummy device 80x30
    Calibrating delay loop (skipped), value calculated using timer frequency.. 666.66 BogoMIPS (lpj=3333333)
    pid_max: default: 32768 minimum: 301
    Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
    Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
    CPU: Testing write buffer coherency: ok
    CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
    Setting up static identity map for 0x100000 - 0x100058
    CPU1: failed to boot: -1
    Brought up 1 CPUs
    SMP: Total of 1 processors activated (666.66 BogoMIPS).
    CPU: All CPU(s) started in SVC mode.
    devtmpfs: initialized
    VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 4
    clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
    pinctrl core: initialized pinctrl subsystem
    NET: Registered protocol family 16
    DMA: preallocated 256 KiB pool for atomic coherent allocations
    cpuidle: using governor menu
    hw-breakpoint: found 5 (+1 reserved) breakpoint and 1 watchpoint registers.
    hw-breakpoint: maximum watchpoint size is 4 bytes.
    zynq-ocm f800c000.ps7-ocmc: ZYNQ OCM pool: 256 KiB @ 0xcf880000
    vgaarb: loaded
    SCSI subsystem initialized
    usbcore: registered new interface driver usbfs
    usbcore: registered new interface driver hub
    usbcore: registered new device driver usb
    media: Linux media interface: v0.10
    Linux video capture interface: v2.00
    pps_core: LinuxPPS API ver. 1 registered
    pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
    PTP clock support registered
    EDAC MC: Ver: 3.0.0
    Advanced Linux Sound Architecture Driver Initialized.
    clocksource: Switched to clocksource arm_global_timer
    NET: Registered protocol family 2
    TCP established hash table entries: 2048 (order: 1, 8192 bytes)
    TCP bind hash table entries: 2048 (order: 2, 16384 bytes)
    TCP: Hash tables configured (established 2048 bind 2048)
    UDP hash table entries: 256 (order: 1, 8192 bytes)
    UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
    NET: Registered protocol family 1
    RPC: Registered named UNIX socket transport module.
    RPC: Registered udp transport module.
    RPC: Registered tcp transport module.
    RPC: Registered tcp NFSv4.1 backchannel transport module.
    PCI: CLS 0 bytes, default 64
    Trying to unpack rootfs image as initramfs...
    rootfs image is not initramfs (no cpio magic); looks like an initrd
    Freeing initrd memory: 20648K (cc6d7000 - cdb01000)
    hw perfevents: enabled with armv7_cortex_a9 PMU driver, 7 counters available
    futex hash table entries: 512 (order: 3, 32768 bytes)
    workingset: timestamp_bits=28 max_order=16 bucket_order=0
    jffs2: version 2.2. (NAND) (SUMMARY) © 2001-2006 Red Hat, Inc.
    io scheduler noop registered
    io scheduler deadline registered
    io scheduler cfq registered (default)
    dma-pl330 f8003000.ps7-dma: Loaded driver for PL330 DMAC-241330
    dma-pl330 f8003000.ps7-dma: DBUFF-128x8bytes Num_Chans-8 Num_Peri-4 Num_Events-16
    e0000000.serial: ttyPS0 at MMIO 0xe0000000 (irq = 158, base_baud = 6249999) is a xuartps
    console [ttyPS0] enabled
    xdevcfg f8007000.ps7-dev-cfg: ioremap 0xf8007000 to cf86e000
    [drm] Initialized drm 1.1.0 20060810
    brd: module loaded
    loop: module loaded
    CAN device driver interface
    gpiod_set_value: invalid GPIO
    libphy: MACB_mii_bus: probed
    macb e000b000.ethernet eth0: Cadence GEM rev 0x00020118 at 0xe000b000 irq 31 (00:0a:35:00:00:00)
    Generic PHY e000b000.etherne:00: attached PHY driver [Generic PHY] (mii_bus:phy_addr=e000b000.etherne:00, irq=-1)
    e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k
    e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
    ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
    ehci-pci: EHCI PCI platform driver
    usbcore: registered new interface driver usb-storage
    mousedev: PS/2 mouse device common for all mice
    i2c /dev entries driver
    Xilinx Zynq CpuIdle Driver started
    sdhci: Secure Digital Host Controller Interface driver
    sdhci: Copyright(c) Pierre Ossman
    sdhci-pltfm: SDHCI platform and OF driver helper
    mmc0: SDHCI controller on e0100000.ps7-sdio [e0100000.ps7-sdio] using ADMA
    ledtrig-cpu: registered to indicate activity on CPUs
    usbcore: registered new interface driver usbhid
    usbhid: USB HID core driver
    nand: device found, Manufacturer ID: 0x2c, Chip ID: 0xda
    nand: Micron MT29F2G08ABAGAWP
    nand: 256 MiB, SLC, erase size: 128 KiB, page size: 2048, OOB size: 128
    nand: WARNING: pl35x-nand: the ECC used on your system is too weak compared to the one required by the NAND chip
    Bad block table found at page 131008, version 0x01
    Bad block table found at page 130944, version 0x01
    6 ofpart partitions found on MTD device pl35x-nand
    Creating 6 MTD partitions on "pl35x-nand":
    0x000000000000-0x000002800000 : "BOOT.bin-env-dts-kernel"
    0x000002800000-0x000004800000 : "ramfs"
    0x000004800000-0x000005000000 : "configs"
    0x000005000000-0x000006000000 : "reserve"
    0x000006000000-0x000008000000 : "ramfs-bak"
    0x000008000000-0x000010000000 : "reserve1"
    NET: Registered protocol family 10
    sit: IPv6 over IPv4 tunneling driver
    NET: Registered protocol family 17
    can: controller area network core (rev 20120528 abi 9)
    NET: Registered protocol family 29
    can: raw protocol (rev 20120528)
    can: broadcast manager protocol (rev 20120528 t)
    can: netlink gateway (rev 20130117) max_hops=1
    zynq_pm_ioremap: no compatible node found for 'xlnx,zynq-ddrc-a05'
    zynq_pm_late_init: Unable to map DDRC IO memory.
    Registering SWP/SWPB emulation handler
    hctosys: unable to open rtc device (rtc0)
    ALSA device list:
    No soundcards found.
    RAMDISK: gzip image found at block 0
    EXT4-fs (ram0): couldn't mount as ext3 due to feature incompatibilities
    EXT4-fs (ram0): mounted filesystem without journal. Opts: (null)
    VFS: Mounted root (ext4 filesystem) on device 1:0.
    devtmpfs: mounted
    Freeing unused kernel memory: 1024K (c0a00000 - c0b00000)
    EXT4-fs (ram0): re-mounted. Opts: block_validity,delalloc,barrier,user_xattr
    random: dd urandom read with 0 bits of entropy available
    ubi0: attaching mtd2
    ubi0: scanning is finished
    ubi0: attached mtd2 (name "configs", size 8 MiB)
    ubi0: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes
    ubi0: min./max. I/O unit sizes: 2048/2048, sub-page size 2048
    ubi0: VID header offset: 2048 (aligned 2048), data offset: 4096
    ubi0: good PEBs: 64, bad PEBs: 0, corrupted PEBs: 0
    ubi0: user volume: 1, internal volumes: 1, max. volumes count: 128
    ubi0: max/mean erase counter: 38/17, WL threshold: 4096, image sequence number: 2636279313
    ubi0: available PEBs: 0, total reserved PEBs: 64, PEBs reserved for bad PEB handling: 40
    ubi0: background thread "ubi_bgt0d" started, PID 708
    UBIFS (ubi0:0): background thread "ubifs_bgt0_0" started, PID 711
    UBIFS (ubi0:0): recovery needed
    UBIFS (ubi0:0): recovery completed
    UBIFS (ubi0:0): UBIFS: mounted UBI device 0, volume 0, name "configs"
    UBIFS (ubi0:0): LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
    UBIFS (ubi0:0): FS size: 1396736 bytes (1 MiB, 11 LEBs), journal size 888833 bytes (0 MiB, 5 LEBs)
    UBIFS (ubi0:0): reserved for root: 65970 bytes (64 KiB)
    UBIFS (ubi0:0): media format: w4/r0 (latest is w4/r0), UUID A5E2E817-94FA-4998-90AB-D2C873A8EBA9, small LPT model
    ubi1: attaching mtd5
    ubi1: scanning is finished
    ubi1: attached mtd5 (name "reserve1", size 128 MiB)
    ubi1: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes
    ubi1: min./max. I/O unit sizes: 2048/2048, sub-page size 2048
    ubi1: VID header offset: 2048 (aligned 2048), data offset: 4096
    ubi1: good PEBs: 1020, bad PEBs: 4, corrupted PEBs: 0
    ubi1: user volume: 1, internal volumes: 1, max. volumes count: 128
    ubi1: max/mean erase counter: 457/166, WL threshold: 4096, image sequence number: 614900815
    ubi1: available PEBs: 0, total reserved PEBs: 1020, PEBs reserved for bad PEB handling: 36
    ubi1: background thread "ubi_bgt1d" started, PID 720
    UBIFS (ubi1:0): background thread "ubifs_bgt1_0" started, PID 723
    UBIFS (ubi1:0): recovery needed
    UBIFS (ubi1:0): recovery completed
    UBIFS (ubi1:0): UBIFS: mounted UBI device 1, volume 0, name "reserve1"
    UBIFS (ubi1:0): LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
    UBIFS (ubi1:0): FS size: 123039744 bytes (117 MiB, 969 LEBs), journal size 6221824 bytes (5 MiB, 49 LEBs)
    UBIFS (ubi1:0): reserved for root: 4952683 bytes (4836 KiB)
    UBIFS (ubi1:0): media format: w4/r0 (latest is w4/r0), UUID 91DF6B3D-1A99-4241-87C7-EB25097110C1, small LPT model
    IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
    IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
    macb e000b000.ethernet eth0: unable to generate target frequency: 25000000 Hz
    macb e000b000.ethernet eth0: link up (100/Full)
    IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
    macb e000b000.ethernet eth0: link down
    In axi fpga driver!
    request_mem_region OK!
    AXI fpga dev virtual address is 0xcfb54000
    *base_vir_addr = 0xb023
    In fpga mem driver!
    request_mem_region OK!
    fpga mem virtual address is 0xd2000000
    macb e000b000.ethernet eth0: unable to generate target frequency: 25000000 Hz
    macb e000b000.ethernet eth0: link up (100/Full)
    random: nonblocking pool is initialized
    2021-03-09 21:30:43:thread.c:1555:create_bitmain_soc_init_thread: create thread
    2021-03-09 21:30:43:driver-btm-api.c:682:init_freq_mode: This is scan-user version
    2021-03-09 21:30:43:driver-btm-api.c:2518:bitmain_soc_init: Miner compile time: Fri Jan 8 22:31:06 CST 2021 type: Antminer S17e
    2021-03-09 21:30:43:driver-btm-api.c:2519:bitmain_soc_init: commit version: 37668c9 2021-01-08 18:20:11, build by: jenkins 2021-01-08 22:35:52
    2021-03-09 21:30:43:driver-btm-api.c:2520:bitmain_soc_init: opt_multi_version = 1
    2021-03-09 21:30:43:driver-btm-api.c:2521:bitmain_soc_init: opt_bitmain_ab = 1
    2021-03-09 21:30:43:driver-btm-api.c:2522:bitmain_soc_init: mid_auto_gen = 0
    2021-03-09 21:30:43:driver-btm-api.c:2523:bitmain_soc_init: work_mode = 0
    2021-03-09 21:30:43:driver-btm-api.c:2524:bitmain_soc_init: power_feedback_en = true
    2021-03-09 21:30:43:driver-btm-api.c:2067:show_sn: no SN got, please write SN to /config/sn
    2021-03-09 21:30:43:driver-btm-api.c:1384:miner_device_init: Detect 256MB control board of XILINX
    2021-03-09 21:30:43:driver-btm-api.c:1325:init_fan_parameter: fan_eft : 0 fan_pwm : 0
    2021-03-09 21:30:49:driver-btm-api.c:1309:init_miner_version: miner ID : 81322c481540885c
    2021-03-09 21:30:49:driver-btm-api.c:1315:init_miner_version: FPGA Version = 0xB023
    2021-03-09 21:30:54:auto_adapt.c:100:_get_board_info: chain[0] board bin: 1, chip bin: 1, chip ft: A4V4, chip version: AB
    2021-03-09 21:30:54:auto_adapt.c:100:_get_board_info: chain[1] board bin: 1, chip bin: 1, chip ft: A4V4, chip version: AB
    2021-03-09 21:30:54:auto_adapt.c:100:_get_board_info: chain[2] board bin: 1, chip bin: 1, chip ft: A4V4, chip version: AB
    2021-03-09 21:30:54:driver-btm-api.c:2164:get_calibration_voltage: calibration voltage flag is error data.
    2021-03-09 21:30:54 voltage[0] = 1850
    2021-03-09 21:30:54 voltage[1] = 1850
    2021-03-09 21:30:54 voltage[2] = 1850
    2021-03-09 21:30:54:auto_adapt.c:273:is_sweep_failed_before: open sweep tag failed
    voltage_ref = 1850
    2100 2100 2100 2100 2100 2100
    2100 2100 2100 2100 2100 2100
    2100 2100 2100 2100 2090 2050
    2100 2090 2080 2060 2030 1960
    2080 2060 2030 2010 1960 1910

    2021-03-09 21:30:54:thread.c:1523:create_read_nonce_reg_thread: create thread
    2021-03-09 21:30:54:driver-btm-api.c:698:dump_pcb_bom_version: Chain [0] PCB Version: 0x0128
    2021-03-09 21:30:54:driver-btm-api.c:699:dump_pcb_bom_version: Chain [0] BOM Version: 0x0100
    2021-03-09 21:30:54:driver-btm-api.c:698:dump_pcb_bom_version: Chain [1] PCB Version: 0x0128
    2021-03-09 21:30:54:driver-btm-api.c:699:dump_pcb_bom_version: Chain [1] BOM Version: 0x0100
    2021-03-09 21:30:54:driver-btm-api.c:698:dump_pcb_bom_version: Chain [2] PCB Version: 0x0128
    2021-03-09 21:30:54:driver-btm-api.c:699:dump_pcb_bom_version: Chain [2] BOM Version: 0x0100
    2021-03-09 21:31:01:driver-btm-api.c:2344:bitmain_board_init: Fan check passed.
    2021-03-09 21:31:02:board.c:81:jump_and_app_check_restore_pic: chain[0] PIC jump to app
    2021-03-09 21:31:04:board.c:94:jump_and_app_check_restore_pic: Check chain[0] PIC fw version=0xb9
    2021-03-09 21:31:05:board.c:81:jump_and_app_check_restore_pic: chain[1] PIC jump to app
    2021-03-09 21:31:07:board.c:94:jump_and_app_check_restore_pic: Check chain[1] PIC fw version=0xb9
    2021-03-09 21:31:08:board.c:81:jump_and_app_check_restore_pic: chain[2] PIC jump to app
    2021-03-09 21:31:10:board.c:94:jump_and_app_check_restore_pic: Check chain[2] PIC fw version=0xb9
    2021-03-09 21:31:10:thread.c:1518:create_pic_heart_beat_thread: create thread
    2021-03-09 21:31:12:power_api.c:241:power_init: power type version: 0x0042
    2021-03-09 21:31:13:power_api.c:259:power_init: Power init:
    2021-03-09 21:31:13:power_api.c:260:power_init: current_voltage_raw = 2136
    2021-03-09 21:31:13:power_api.c:261:power_init: highest_voltage_raw = 2000
    2021-03-09 21:31:13:power_api.c:262:power_init: working_voltage_raw = 1800
    2021-03-09 21:31:13:power_api.c:263:power_init: higher_voltage_raw = 1850
    2021-03-09 21:31:13:power_api.c:264:power_init: check_asic_voltage_raw = 1800
    2021-03-09 21:31:13:driver-btm-api.c:2354:bitmain_board_init: Enter 60s sleep to make sure power release finish.
    2021-03-09 21:32:15:driver-btm-api.c:1123:check_asic_number_until_volt_balance: THIS is No.1 time boost asic:
    2021-03-09 21:32:15:power_api.c:334:modify_check_asic_voltage: check_asic_voltage_raw = 1800
    2021-03-09 21:32:18:power_api.c:298:set_to_check_asic_voltage_by_steps: Set to voltage raw 1800, step by step.
    2021-03-09 21:32:46:uart.c:69:set_baud: set UART baud to 115200
    chain 0, IO_DRIVE_STRENGTH_CONFIGURATION reg = 0x 7777777
    2021-03-09 21:32:51:driver-btm-api.c:1035:check_asic_number_with_power_on: Chain[0]: find 135 asic, times 0
    chain 1, IO_DRIVE_STRENGTH_CONFIGURATION reg = 0x 7777777
    2021-03-09 21:32:56:driver-btm-api.c:1035:check_asic_number_with_power_on: Chain[1]: find 135 asic, times 0
    chain 2, IO_DRIVE_STRENGTH_CONFIGURATION reg = 0x 7777777
    2021-03-09 21:32:59:driver-btm-api.c:1035:check_asic_number_with_power_on: Chain[2]: find 0 asic, times 0
    2021-03-09 21:33:02:board.c:81:jump_and_app_check_restore_pic: chain[2] PIC jump to app
    2021-03-09 21:33:04:board.c:94:jump_and_app_check_restore_pic: Check chain[2] PIC fw version=0xb9
    chain 2, IO_DRIVE_STRENGTH_CONFIGURATION reg = 0x 7777777
    2021-03-09 21:33:08:driver-btm-api.c:1035:check_asic_number_with_power_on: Chain[2]: find 135 asic, times 1
    2021-03-09 21:33:08:driver-btm-api.c:1163:check_asic_number_until_volt_balance: PASS: volt balance at No.1 time boost asic.
    2021-03-09 21:33:08:power_api.c:364:set_to_highest_voltage_by_steps: Set to voltage raw 2000, step by step.
    2021-03-09 21:33:55:driver-hash-chip.c:876:set_uart_relay: set uart relay to 0x390003
    2021-03-09 21:33:55:driver-hash-chip.c:1264:set_ldo_ctrl: Set LDO to 0x2000203
    2021-03-09 21:33:55:driver-hash-chip.c:737:dump_adc_voltage_v2: get ADC_DATAOUT from chain 0 with 0 regs timeout.
    chain 0 domain 0: d0 0.359, d1 0.363, d2 0.363, d3 0.361, sum = 1.445801
    chain 0 domain 1: d0 0.346, d1 0.345, d2 0.345, d3 0.344, sum = 1.380330
    chain 0 domain 2: d0 0.328, d1 0.329, d2 0.328, d3 0.327, sum = 1.313029
    chain 0 domain 3: d0 0.318, d1 0.317, d2 0.318, d3 0.320, sum = 1.273926
    chain 0 domain 4: d0 0.331, d1 0.331, d2 0.331, d3 0.331, sum = 1.323893
    chain 0 domain 5: d0 0.335, d1 0.333, d2 0.332, d3 0.335, sum = 1.334798
    chain 0 domain 6: d0 0.311, d1 0.313, d2 0.312, d3 0.309, sum = 1.245361
    chain 0 domain 7: d0 0.329, d1 0.324, d2 0.323, d3 0.321, sum = 1.297078
    chain 0 domain 8: d0 0.347, d1 0.345, d2 0.343, d3 0.344, sum = 1.378540
    chain 0 domain 9: d0 0.330, d1 0.327, d2 0.327, d3 0.325, sum = 1.308390
    chain 0 domain 10: d0 0.311, d1 0.313, d2 0.312, d3 0.306, sum = 1.241252
    chain 0 domain 11: d0 0.330, d1 0.332, d2 0.332, d3 0.334, sum = 1.326823
    chain 0 domain 12: d0 0.325, d1 0.327, d2 0.331, d3 0.333, sum = 1.316447
    chain 0 domain 13: d0 0.330, d1 0.329, d2 0.328, d3 0.327, sum = 1.313395
    chain 0 domain 14: d0 0.325, d1 0.327, d2 0.331, d3 0.329, sum = 1.313354
    2021-03-09 21:33:56:driver-hash-chip.c:737:dump_adc_voltage_v2: get ADC_DATAOUT from chain 1 with 0 regs timeout.
    chain 1 domain 0: d0 0.347, d1 0.346, d2 0.348, d3 0.352, sum = 1.393229
    chain 1 domain 1: d0 0.331, d1 0.327, d2 0.328, d3 0.336, sum = 1.321859
    chain 1 domain 2: d0 0.314, d1 0.310, d2 0.310, d3 0.311, sum = 1.244751
    chain 1 domain 3: d0 0.310, d1 0.304, d2 0.309, d3 0.310, sum = 1.233073
    chain 1 domain 4: d0 0.312, d1 0.307, d2 0.307, d3 0.314, sum = 1.240804
    chain 1 domain 5: d0 0.342, d1 0.337, d2 0.337, d3 0.343, sum = 1.357951
    chain 1 domain 6: d0 0.334, d1 0.331, d2 0.330, d3 0.332, sum = 1.326497
    chain 1 domain 7: d0 0.328, d1 0.318, d2 0.322, d3 0.330, sum = 1.298665
    chain 1 domain 8: d0 0.334, d1 0.331, d2 0.326, d3 0.330, sum = 1.321493
    chain 1 domain 9: d0 0.349, d1 0.344, d2 0.341, d3 0.344, sum = 1.379395
    chain 1 domain 10: d0 0.324, d1 0.323, d2 0.318, d3 0.319, sum = 1.283854
    chain 1 domain 11: d0 0.338, d1 0.334, d2 0.334, d3 0.343, sum = 1.349406
    chain 1 domain 12: d0 0.315, d1 0.312, d2 0.312, d3 0.317, sum = 1.257080
    chain 1 domain 13: d0 0.346, d1 0.345, d2 0.347, d3 0.349, sum = 1.386556
    chain 1 domain 14: d0 0.352, d1 0.348, d2 0.351, d3 0.353, sum = 1.403687
    2021-03-09 21:33:56:driver-hash-chip.c:737:dump_adc_voltage_v2: get ADC_DATAOUT from chain 2 with 0 regs timeout.
    chain 2 domain 0: d0 0.359, d1 0.361, d2 0.361, d3 0.361, sum = 1.442546
    chain 2 domain 1: d0 0.335, d1 0.338, d2 0.336, d3 0.337, sum = 1.346883
    chain 2 domain 2: d0 0.320, d1 0.320, d2 0.319, d3 0.320, sum = 1.278646
    chain 2 domain 3: d0 0.312, d1 0.311, d2 0.311, d3 0.310, sum = 1.243083
    chain 2 domain 4: d0 0.306, d1 0.308, d2 0.310, d3 0.311, sum = 1.233968
    chain 2 domain 5: d0 0.285, d1 0.286, d2 0.285, d3 0.285, sum = 1.141032
    chain 2 domain 6: d0 0.330, d1 0.331, d2 0.329, d3 0.332, sum = 1.321655
    chain 2 domain 7: d0 0.326, d1 0.326, d2 0.329, d3 0.332, sum = 1.311930
    chain 2 domain 8: d0 0.347, d1 0.346, d2 0.348, d3 0.349, sum = 1.389730
    chain 2 domain 9: d0 0.326, d1 0.325, d2 0.328, d3 0.328, sum = 1.307088
    chain 2 domain 10: d0 0.336, d1 0.337, d2 0.338, d3 0.341, sum = 1.351644
    chain 2 domain 11: d0 0.332, d1 0.330, d2 0.329, d3 0.332, sum = 1.323486
    chain 2 domain 12: d0 0.331, d1 0.332, d2 0.334, d3 0.335, sum = 1.331828
    chain 2 domain 13: d0 0.353, d1 0.350, d2 0.351, d3 0.352, sum = 1.405355
    chain 2 domain 14: d0 0.339, d1 0.340, d2 0.340, d3 0.341, sum = 1.360636
    2021-03-09 21:33:57:driver-hash-chip.c:493:check_adc_voltage: PASS domainn volt check: request 0.800 (index 0, open_core)
    2021-03-09 21:33:58:temperature.c:272:calibrate_temp_sensor_one_chain: chain 0 temp sensor NCT218
    2021-03-09 21:33:59:temperature.c:272:calibrate_temp_sensor_one_chain: chain 1 temp sensor NCT218
    2021-03-09 21:34:01:temperature.c:272:calibrate_temp_sensor_one_chain: chain 2 temp sensor NCT218
    2021-03-09 21:34:06:driver-btm-api.c:311:check_bringup_temp: Bring up temperature is 31
    2021-03-09 21:34:06:uart.c:69:set_baud: set UART baud to 6000000
    2021-03-09 21:34:06 voltage[0] = 1850
    2021-03-09 21:34:06 voltage[1] = 1850
    2021-03-09 21:34:06 voltage[2] = 1850
    2021-03-09 21:34:06:power_api.c:272:set_working_voltage_raw: working_voltage_raw = 1850
    2021-03-09 21:34:06:thread.c:1538:create_check_miner_status_thread: create thread
    2021-03-09 21:34:06:thread.c:1528:create_show_miner_status_thread: create thread
    2021-03-09 21:34:06:thread.c:1503:create_temperature_monitor_thread: create thread
    2021-03-09 21:34:06:thread.c:1580:create_fan_monitor_thread: create thread
    2021-03-09 21:34:06:frequency.c:578:inc_freq_with_fixed_vco: chain = 255, freq = 410, is_higher_voltage = true
    2021-03-09 21:34:12:frequency.c:623:inc_freq_with_fixed_vco: get pcb 31 ~ 37, chip_temp 35 ~ 44, now 6.0s, target 45.0
    2021-03-09 21:34:13:frequency.c:623:inc_freq_with_fixed_vco: get pcb 31 ~ 37, chip_temp 35 ~ 45, now 7.0s, target 45.2
    2021-03-09 21:34:14:frequency.c:623:inc_freq_with_fixed_vco: get pcb 31 ~ 38, chip_temp 35 ~ 45, now 8.0s, target 45.3
    2021-03-09 21:34:15:frequency.c:623:inc_freq_with_fixed_vco: get pcb 31 ~ 38, chip_temp 35 ~ 46, now 9.0s, target 45.5
    2021-03-09 21:34:15:frequency.c:644:inc_freq_with_fixed_vco: heat speed too fast! current_temp 46 > 45.5 target_temp.
    2021-03-09 21:34:21:frequency.c:623:inc_freq_with_fixed_vco: get pcb 32 ~ 39, chip_temp 35 ~ 50, now 15.0s, target 46.5
    2021-03-09 21:34:21:frequency.c:644:inc_freq_with_fixed_vco: heat speed too fast! current_temp 50 > 46.5 target_temp.
    2021-03-09 21:34:27:frequency.c:623:inc_freq_with_fixed_vco: get pcb 32 ~ 40, chip_temp 35 ~ 51, now 21.0s, target 47.5
    2021-03-09 21:34:27:frequency.c:644:inc_freq_with_fixed_vco: heat speed too fast! current_temp 51 > 47.5 target_temp.
    2021-03-09 21:34:33:frequency.c:623:inc_freq_with_fixed_vco: get pcb 32 ~ 43, chip_temp 35 ~ 55, now 27.0s, target 48.5
    2021-03-09 21:34:33:frequency.c:644:inc_freq_with_fixed_vco: heat speed too fast! current_temp 55 > 48.5 target_temp.
    2021-03-09 21:34:39:frequency.c:623:inc_freq_with_fixed_vco: get pcb 32 ~ 46, chip_temp 34 ~ 59, now 33.0s, target 49.5
    2021-03-09 21:34:39:frequency.c:644:inc_freq_with_fixed_vco: heat speed too fast! current_temp 59 > 49.5 target_temp.
    2021-03-09 21:34:45:frequency.c:623:inc_freq_with_fixed_vco: get pcb 32 ~ 47, chip_temp 35 ~ 62, now 39.0s, target 50.5
    2021-03-09 21:34:45:frequency.c:644:inc_freq_with_fixed_vco: heat speed too fast! current_temp 62 > 50.5 target_temp.
    2021-03-09 21:34:51:frequency.c:623:inc_freq_with_fixed_vco: get pcb 32 ~ 49, chip_temp 35 ~ 64, now 45.0s, target 51.5
    2021-03-09 21:34:51:frequency.c:644:inc_freq_with_fixed_vco: heat speed too fast! current_temp 64 > 51.5 target_temp.
    2021-03-09 21:34:57:frequency.c:623:inc_freq_with_fixed_vco: get pcb 33 ~ 51, chip_temp 35 ~ 67, now 51.0s, target 52.5
    2021-03-09 21:34:57:frequency.c:644:inc_freq_with_fixed_vco: heat speed too fast! current_temp 67 > 52.5 target_temp.
    2021-03-09 21:35:03:frequency.c:623:inc_freq_with_fixed_vco: get pcb 33 ~ 52, chip_temp 36 ~ 69, now 57.0s, target 53.5
    2021-03-09 21:35:03:frequency.c:644:inc_freq_with_fixed_vco: heat speed too fast! current_temp 69 > 53.5 target_temp.
    2021-03-09 21:35:09:frequency.c:623:inc_freq_with_fixed_vco: get pcb 34 ~ 54, chip_temp 36 ~ 69, now 63.0s, target 54.5
    2021-03-09 21:35:09:frequency.c:644:inc_freq_with_fixed_vco: heat speed too fast! current_temp 69 > 54.5 target_temp.
    2021-03-09 21:35:15:frequency.c:623:inc_freq_with_fixed_vco: get pcb 34 ~ 54, chip_temp 37 ~ 68, now 69.0s, target 55.5
    2021-03-09 21:35:15:frequency.c:644:inc_freq_with_fixed_vco: heat speed too fast! current_temp 68 > 55.5 target_temp.
    2021-03-09 21:35:21:frequency.c:623:inc_freq_with_fixed_vco: get pcb 35 ~ 53, chip_temp 37 ~ 67, now 75.0s, target 56.5
    2021-03-09 21:35:21:frequency.c:644:inc_freq_with_fixed_vco: heat speed too fast! current_temp 67 > 56.5 target_temp.
    2021-03-09 21:35:27:frequency.c:623:inc_freq_with_fixed_vco: get pcb 36 ~ 53, chip_temp 39 ~ 66, now 81.0s, target 57.5
    2021-03-09 21:35:27:frequency.c:644:inc_freq_with_fixed_vco: heat speed too fast! current_temp 66 > 57.5 target_temp.
    2021-03-09 21:35:33:frequency.c:623:inc_freq_with_fixed_vco: get pcb 37 ~ 52, chip_temp 40 ~ 66, now 87.0s, target 58.5
    2021-03-09 21:35:33:frequency.c:644:inc_freq_with_fixed_vco: heat speed too fast! current_temp 66 > 58.5 target_temp.
    2021-03-09 21:35:39:frequency.c:623:inc_freq_with_fixed_vco: get pcb 38 ~ 53, chip_temp 41 ~ 65, now 93.0s, target 59.5
    2021-03-09 21:35:39:frequency.c:644:inc_freq_with_fixed_vco: heat speed too fast! current_temp 65 > 59.5 target_temp.
    2021-03-09 21:35:45:frequency.c:623:inc_freq_with_fixed_vco: get pcb 38 ~ 52, chip_temp 42 ~ 64, now 99.0s, target 60.5
    2021-03-09 21:35:45:frequency.c:644:inc_freq_with_fixed_vco: heat speed too fast! current_temp 64 > 60.5 target_temp.
    2021-03-09 21:35:51:frequency.c:623:inc_freq_with_fixed_vco: get pcb 39 ~ 52, chip_temp 42 ~ 64, now 105.0s, target 61.5
    2021-03-09 21:35:51:frequency.c:644:inc_freq_with_fixed_vco: heat speed too fast! current_temp 64 > 61.5 target_temp.
    2021-03-09 21:35:57:frequency.c:623:inc_freq_with_fixed_vco: get pcb 39 ~ 52, chip_temp 42 ~ 65, now 111.0s, target 62.5
    2021-03-09 21:35:57:frequency.c:644:inc_freq_with_fixed_vco: heat speed too fast! current_temp 65 > 62.5 target_temp.
    2021-03-09 21:36:03:frequency.c:623:inc_freq_with_fixed_vco: get pcb 40 ~ 52, chip_temp 43 ~ 66, now 117.0s, target 63.5
    2021-03-09 21:36:03:frequency.c:644:inc_freq_with_fixed_vco: heat speed too fast! current_temp 66 > 63.5 target_temp.
    2021-03-09 21:36:09:frequency.c:623:inc_freq_with_fixed_vco: get pcb 40 ~ 52, chip_temp 44 ~ 64, now 123.0s, target 64.5
    2021-03-09 21:36:10:frequency.c:623:inc_freq_with_fixed_vco: get pcb 40 ~ 52, chip_temp 44 ~ 64, now 124.0s, target 64.7
    2021-03-09 21:36:11:frequency.c:623:inc_freq_with_fixed_vco: get pcb 40 ~ 52, chip_temp 44 ~ 64, now 125.0s, target 64.8
    2021-03-09 21:36:12:frequency.c:623:inc_freq_with_fixed_vco: get pcb 40 ~ 52, chip_temp 45 ~ 63, now 126.0s, target 65.0
    2021-03-09 21:36:12:frequency.c:657:inc_freq_with_fixed_vco: [0] _POSTDIV1 = 7, _POSTDIV2 = 7, USER_DIV = 1, freq = 41
    2021-03-09 21:36:18:frequency.c:623:inc_freq_with_fixed_vco: get pcb 40 ~ 53, chip_temp 44 ~ 65, now 132.0s, target 66.0
    2021-03-09 21:36:19:frequency.c:623:inc_freq_with_fixed_vco: get pcb 40 ~ 53, chip_temp 45 ~ 66, now 133.0s, target 66.2
    2021-03-09 21:36:20:frequency.c:623:inc_freq_with_fixed_vco: get pcb 39 ~ 53, chip_temp 45 ~ 66, now 134.1s, target 66.3
    2021-03-09 21:36:21:frequency.c:623:inc_freq_with_fixed_vco: get pcb 39 ~ 54, chip_temp 45 ~ 66, now 135.1s, target 66.5
    2021-03-09 21:36:22:frequency.c:623:inc_freq_with_fixed_vco: get pcb 39 ~ 53, chip_temp 45 ~ 66, now 136.1s, target 66.7
    2021-03-09 21:36:23:frequency.c:623:inc_freq_with_fixed_vco: get pcb 39 ~ 53, chip_temp 45 ~ 66, now 137.1s, target 66.8
    2021-03-09 21:36:24:frequency.c:623:inc_freq_with_fixed_vco: get pcb 39 ~ 54, chip_temp 45 ~ 66, now 138.1s, target 67.0
    2021-03-09 21:36:25:frequency.c:623:inc_freq_with_fixed_vco: get pcb 40 ~ 54, chip_temp 46 ~ 66, now 139.1s, target 67.2
    2021-03-09 21:36:26:frequency.c:623:inc_freq_with_fixed_vco: get pcb 39 ~ 55, chip_temp 45 ~ 65, now 140.1s, target 67.4
    2021-03-09 21:36:26:frequency.c:657:inc_freq_with_fixed_vco: [1] _POSTDIV1 = 7, _POSTDIV2 = 6, USER_DIV = 1, freq = 48
    2021-03-09 21:36:32:frequency.c:623:inc_freq_with_fixed_vco: get pcb 39 ~ 55, chip_temp 48 ~ 64, now 146.1s, target 68.4
    2021-03-09 21:36:32:frequency.c:657:inc_freq_with_fixed_vco: [2] _POSTDIV1 = 6, _POSTDIV2 = 6, USER_DIV = 1, freq = 56
    2021-03-09 21:36:32:frequency.c:665:inc_freq_with_fixed_vco: set to 56M, get pcb 39 ~ 55, chip_temp 48 ~ 64
    2021-03-09 21:36:32:power_api.c:376:set_to_voltage_by_steps: Set to voltage raw 2100, step by step.
    2021-03-09 21:36:53:frequency.c:671:inc_freq_with_fixed_vco: freq_mode 1=1 FREQ_MODE_USER, Conf.Check_Clock_Cnt=0
    2021-03-09 21:36:53:driver-btm-api.c:1941:check_clock_counter_domain_last_core: freq 56 clock_counter_limit 5, no check, skip.
    2021-03-09 21:37:01:frequency.c:623:inc_freq_with_fixed_vco: get pcb 40 ~ 60, chip_temp 49 ~ 77, now 174.4s, target 73.1
    2021-03-09 21:37:01:frequency.c:644:inc_freq_with_fixed_vco: heat speed too fast! current_temp 77 > 73.1 target_temp.
    2021-03-09 21:37:07:frequency.c:623:inc_freq_with_fixed_vco: get pcb 40 ~ 61, chip_temp 49 ~ 79, now 180.4s, target 74.1
    2021-03-09 21:37:07:frequency.c:644:inc_freq_with_fixed_vco: heat speed too fast! current_temp 79 > 74.1 target_temp.
    2021-03-09 21:37:13:frequency.c:623:inc_freq_with_fixed_vco: get pcb 41 ~ 62, chip_temp 50 ~ 82, now 186.4s, target 75.1
    2021-03-09 21:37:13:frequency.c:644:inc_freq_with_fixed_vco: heat speed too fast! current_temp 82 > 75.1 target_temp.
    2021-03-09 21:37:19:frequency.c:623:inc_freq_with_fixed_vco: get pcb 40 ~ 63, chip_temp 51 ~ 80, now 192.4s, target 76.1
    2021-03-09 21:37:19:frequency.c:644:inc_freq_with_fixed_vco: heat speed too fast! current_temp 80 > 76.1 target_temp.
    2021-03-09 21:37:25:frequency.c:623:inc_freq_with_fixed_vco: get pcb 41 ~ 64, chip_temp 52 ~ 83, now 198.4s, target 77.1
    2021-03-09 21:37:25:frequency.c:644:inc_freq_with_fixed_vco: heat speed too fast! current_temp 83 > 77.1 target_temp.
    2021-03-09 21:37:31:frequency.c:623:inc_freq_with_fixed_vco: get pcb 40 ~ 65, chip_temp 52 ~ 85, now 204.4s, target 78.1
    2021-03-09 21:37:31:frequency.c:644:inc_freq_with_fixed_vco: heat speed too fast! current_temp 85 > 78.1 target_temp.
    2021-03-09 21:37:36:temperature.c:737:get_temp_info: read temp sensor failed: chain = 0, sensor = 2, chip = 99, reg = 0
    2021-03-09 21:37:36:temperature.c:737:get_temp_info: read temp sensor failed: chain = 0, sensor = 2, chip = 99, reg = 1
    2021-03-09 21:37:36:temperature.c:737:get_temp_info: read temp sensor failed: chain = 0, sensor = 3, chip = 107, reg = 0
    2021-03-09 21:37:36:temperature.c:737:get_temp_info: read temp sensor failed: chain = 0, sensor = 3, chip = 107, reg = 1
    2021-03-09 21:37:37:frequency.c:623:inc_freq_with_fixed_vco: get pcb 41 ~ 66, chip_temp 52 ~ 74, now 210.4s, target 79.1
    2021-03-09 21:37:37:frequency.c:657:inc_freq_with_fixed_vco: [3] _POSTDIV1 = 7, _POSTDIV2 = 5, USER_DIV = 1, freq = 58
    2021-03-09 21:37:37:frequency.c:665:inc_freq_with_fixed_vco: set to 58M, get pcb 41 ~ 66, chip_temp 52 ~ 74
    2021-03-09 21:37:37:frequency.c:671:inc_freq_with_fixed_vco: freq_mode 1=1 FREQ_MODE_USER, Conf.Check_Clock_Cnt=0
    2021-03-09 21:37:37:temperature.c:737:get_temp_info: read temp sensor failed: chain = 0, sensor = 0, chip = 27, reg = 0
    2021-03-09 21:37:37:temperature.c:737:get_temp_info: read temp sensor failed: chain = 0, sensor = 0, chip = 27, reg = 1
    2021-03-09 21:37:37:driver-btm-api.c:1941:check_clock_counter_domain_last_core: freq 58 clock_counter_limit 6, no check, skip.
    2021-03-09 21:37:37:temperature.c:737:get_temp_info: read temp sensor failed: chain = 0, sensor = 1, chip = 35, reg = 0
    2021-03-09 21:37:37:temperature.c:737:get_temp_info: read temp sensor failed: chain = 0, sensor = 1, chip = 35, reg = 1
    2021-03-09 21:37:37:temperature.c:737:get_temp_info: read temp sensor failed: chain = 0, sensor = 2, chip = 99, reg = 0
    2021-03-09 21:37:37:temperature.c:737:get_temp_info: read temp sensor failed: chain = 0, sensor = 2, chip = 99, reg = 1
    2021-03-09 21:37:37:temperature.c:737:get_temp_info: read temp sensor failed: chain = 0, sensor = 3, chip = 107, reg = 0
    2021-03-09 21:37:37:temperature.c:737:get_temp_info: read temp sensor failed: chain = 0, sensor = 3, chip = 107, reg = 1
    2021-03-09 21:37:37:temperature.c:754:get_temp_info: ERROR: chain 0 can get NONE temp info or temp value abnormal, power it off
    2021-03-09 21:37:37:driver-hash-chip.c:591:recalc_invalid_volt: chain 0 domain 03 column 00 single core_domain: no useful core domain volt: 0.00 0.00 0.00 0.00.
    2021-03-09 21:37:37:driver-hash-chip.c:591:recalc_invalid_volt: chain 0 domain 03 column 01 single core_domain: no useful core domain volt: 0.00 0.00 0.00 0.00.
    2021-03-09 21:37:37:driver-hash-chip.c:591:recalc_invalid_volt: chain 0 domain 03 column 02 single core_domain: no useful core domain volt: 0.00 0.00 0.00 0.00.
    2021-03-09 21:37:37:driver-hash-chip.c:591:recalc_invalid_volt: chain 0 domain 03 column 03 single core_domain: no useful core domain volt: 0.00 0.00 0.00 0.00.
    2021-03-09 21:37:37:driver-hash-chip.c:591:recalc_invalid_volt: chain 0 domain 03 column 04 single core_domain: no useful core domain volt: 0.00 0.00 0.00 0.00.
    2021-03-09 21:37:37:driver-hash-chip.c:591:recalc_invalid_volt: chain 0 domain 03 column 05 single core_domain: no useful core domain volt: 0.00 0.00 0.00 0.00.
    2021-03-09 21:37:37:driver-hash-chip.c:591:recalc_invalid_volt: chain 0 domain 03 column 06 single core_domain: no useful core domain volt: 0.00 0.00 0.00 0.00.
    2021-03-09 21:37:37:driver-hash-chip.c:591:recalc_invalid_volt: chain 0 domain 03 column 07 single core_domain: no useful core domain volt: 0.00 0.00 0.00 0.00.
    2021-03-09 21:37:37:driver-hash-chip.c:591:recalc_invalid_volt: chain 0 domain 03 column 08 single core_domain: no useful core domain volt: 0.00 0.00 0.00 0.00.
    2021-03-09 21:37:37:driver-hash-chip.c:591:recalc_invalid_volt: chain 0 domain 04 column 00 single core_domain: no useful core domain volt: 0.00 0.00 0.00 0.00.
    2021-03-09 21:37:37:driver-hash-chip.c:591:recalc_invalid_volt: chain 0 domain 04 column 01 single core_domain: no useful core domain volt: 0.00 0.00 0.00 0.00.
    2021-03-09 21:37:37:driver-hash-chip.c:591:recalc_invalid_volt: chain 0 domain 04 column 02 single core_domain: no useful core domain volt: 0.00 0.00 0.00 0.00.
    2021-03-09 21:37:37:driver-hash-chip.c:591:recalc_invalid_volt: chain 0 domain 04 column 03 single core_domain: no useful core domain volt: 0.00 0.00 0.00 0.00.
    2021-03-09 21:37:37:driver-hash-chip.c:591:recalc_invalid_volt: chain 0 domain 04 column 04 single core_domain: no useful core domain volt: 0.00 0.00 0.00 0.00.
    2021-03-09 21:37:37:driver-hash-chip.c:591:recalc_invalid_volt: chain 0 domain 04 column 05 single core_domain: no useful core domain volt: 0.00 0.00 0.00 0.00.
    2021-03-09 21:37:37:driver-hash-chip.c:591:recalc_invalid_volt: chain 0 domain 04 column 06 single core_domain: no useful core domain volt: 0.00 0.00 0.00 0.00.
    2021-03-09 21:37:37:driver-hash-chip.c:591:recalc_invalid_volt: chain 0 domain 04 column 07 single core_domain: no useful core domain volt: 0.00 0.00 0.00 0.00.
    2021-03-09 21:37:37:driver-hash-chip.c:591:recalc_invalid_volt: chain 0 domain 04 column 08 single core_domain: no useful core domain volt: 0.00 0.00 0.00 0.00.
    2021-03-09 21:37:37:driver-hash-chip.c:591:recalc_invalid_volt: chain 0 domain 05 column 00 single core_domain: no useful core domain volt: 0.00 0.00 0.00 0.00.
    2021-03-09 21:37:37:driver-hash-chip.c:591:recalc_invalid_volt: chain 0 domain 05 column 01 single core_domain: no useful core domain volt: 0.00 0.00 0.00 0.00.
    2021-03-09 21:37:37:driver-hash-chip.c:591:recalc_invalid_volt: chain 0 domain 05 column 02 single core_domain: no useful core domain volt: 0.00 0.00 0.00 0.00.
    2021-03-09 21:37:37:driver-hash-chip.c:591:recalc_invalid_volt: chain 0 domain 05 column 03 single core_domain: no useful core domain volt: 0.00 0.00 0.00 0.00.
    2021-03-09 21:37:37:driver-hash-chip.c:591:recalc_invalid_volt: chain 0 domain 05 column 04 single core_domain: no useful core domain volt: 0.00 0.00 0.00 0.00.
    2021-03-09 21:37:37:driver-hash-chip.c:591:recalc_invalid_volt: chain 0 domain 05 column 05 single core_domain: no useful core domain volt: 0.00 0.00 0.00 0.00.
    2021-03-09 21:37:37:driver-hash-chip.c:591:recalc_invalid_volt: chain 0 domain 05 column 06 single core_domain: no useful core domain volt: 0.00 0.00 0.00 0.00.
    2021-03-09 21:37:37:driver-hash-chip.c:591:recalc_invalid_volt: chain 0 domain 05 column 07 single core_domain: no useful core domain volt: 0.00 0.00 0.00 0.00.
    2021-03-09 21:37:37:driver-hash-chip.c:591:recalc_invalid_volt: chain 0 domain 05 column 08 single core_domain: no useful core domain volt: 0.00 0.00 0.00 0.00.
    2021-03-09 21:37:37:driver-hash-chip.c:591:recalc_invalid_volt: chain 0 domain 06 column 00 single core_domain: no useful core domain volt: 0.00 0.00 0.00 0.00.
    2021-03-09 21:37:37:driver-hash-chip.c:591:recalc_invalid_volt: chain 0 domain 06 column 01 single core_domain: no useful core domain volt: 0.00 0.00 0.00 0.00.
    2021-03-09 21:37:37:driver-hash-chip.c:591:recalc_invalid_volt: chain 0 domain 06 column 02 single core_domain: no useful core domain volt: 0.00 0.00 0.00 0.00.
    2021-03-09 21:37:37:driver-hash-chip.c:591:recalc_invalid_volt: chain 0 domain 06 column 03 single core_domain: no useful core domain volt: 0.00 0.00 0.00 0.00.
    2021-03-09 21:37:37:driver-hash-chip.c:591:recalc_invalid_volt: chain 0 domain 06 column 04 single core_domain: no useful core domain volt: 0.00 0.00 0.00 0.00.
    2021-03-09 21:37:37:driver-hash-chip.c:591:recalc_invalid_volt: chain 0 domain 06 column 05 single core_domain: no useful core domain volt: 0.00 0.00 0.00 0.00.
    2021-03-09 21:37:37:driver-hash-chip.c:591:recalc_invalid_volt: chain 0 domain 06 column 06 single core_domain: no useful core domain volt: 0.00 0.00 0.00 0.00.
    2021-03-09 21:37:37:driver-hash-chip.c:591:recalc_invalid_volt: chain 0 domain 06 column 07 single core_domain: no useful core domain volt: 0.00 0.00 0.00 0.00.
    2021-03-09 21:37:37:driver-hash-chip.c:591:recalc_invalid_volt: chain 0 domain 06 column 08 single core_domain: no useful core domain volt: 0.00 0.00 0.00 0.00.
    2021-03-09 21:37:37:driver-hash-chip.c:591:recalc_invalid_volt: chain 0 domain 07 column 00 single core_domain: no useful core domain volt: 0.00 0.00 0.00 0.00.
    2021-03-09 21:37:37:driver-hash-chip.c:591:recalc_invalid_volt: chain 0 domain 07 column 01 single core_domain: no useful core domain volt: 0.00 0.00 0.00 0.00.
    2021-03-09 21:37:37:driver-hash-chip.c:591:recalc_invalid_volt: chain 0 domain 07 column 02 single core_domain: no useful core domain volt: 0.00 0.00 0.00 0.00.
    2021-03-09 21:37:37:driver-hash-chip.c:591:recalc_invalid_volt: chain 0 domain 07 column 03 single core_domain: no useful core domain volt: 0.00 0.00 0.00 0.00.
    2021-03-09 21:37:37:driver-hash-chip.c:591:recalc_invalid_volt: chain 0 domain 07 column 04 single core_domain: no useful core domain volt: 0.00 0.00 0.00 0.00.
    2021-03-09 21:37:37:driver-hash-chip.c:591:recalc_invalid_volt: chain 0 domain 07 column 05 single core_domain: no useful core domain volt: 0.00 0.00 0.00 0.00.
    2021-03-09 21:37:37:driver-hash-chip.c:591:recalc_invalid_volt: chain 0 domain 07 column 06 single core_domain: no useful core domain volt: 0.00 0.00 0.00 0.00.
    2021-03-09 21:37:37:driver-hash-chip.c:591:recalc_invalid_volt: chain 0 domain 07 column 07 single core_domain: no useful core domain volt: 0.00 0.00 0.00 0.00.
    2021-03-09 21:37:37:driver-hash-chip.c:591:recalc_invalid_volt: chain 0 domain 07 column 08 single core_domain: no useful core domain volt: 0.00 0.00 0.00 0.00.
    2021-03-09 21:37:37:driver-hash-chip.c:591:recalc_invalid_volt: chain 0 domain 08 column 00 single core_domain: no useful core domain volt: 0.00 0.00 0.00 0.00.
    2021-03-09 21:37:37:driver-hash-chip.c:591:recalc_invalid_volt: chain 0 domain 08 column 01 single core_domain: no useful core domain volt: 0.00 0.00 0.00 0.00.
    2021-03-09 21:37:37:driver-hash-chip.c:591:recalc_invalid_volt: chain 0 domain 08 column 02 single core_domain: no useful core domain volt: 0.00 0.00 0.00 0.00.
    2021-03-09 21:37:37:driver-hash-chip.c:591:recalc_invalid_volt: chain 0 domain 08 column 03 single core_domain: no useful core domain volt: 0.00 0.00 0.00 0.00.
    2021-03-09 21:37:37:driver-hash-chip.c:591:recalc_invalid_volt: chain 0 domain 08 column 04 single core_domain: no useful core domain volt: 0.00 0.00 0.00 0.00.
    2021-03-09 21:37:37:driver-hash-chip.c:591:recalc_invalid_volt: chain 0 domain 08 column 05 single core_domain: no useful core domain volt: 0.00 0.00 0.00 0.00.
    2021-03-09 21:37:37:driver-hash-chip.c:591:recalc_invalid_volt: chain 0 domain 08 column 06 single core_domain: no useful core domain volt: 0.00 0.00 0.00 0.00.
    2021-03-09 21:37:37:driver-hash-chip.c:591:recalc_invalid_volt: chain 0 domain 08 column 07 single core_domain: no useful core domain volt: 0.00 0.00 0.00 0.00.
    2021-03-09 21:37:37:driver-hash-chip.c:591:recalc_invalid_volt: chain 0 domain 08 column 08 single core_domain: no useful core domain volt: 0.00 0.00 0.00 0.00.
    2021-03-09 21:37:37:driver-hash-chip.c:591:recalc_invalid_volt: chain 0 domain 09 column 00 single core_domain: no useful core domain volt: 0.00 0.00 0.00 0.00.
    2021-03-09 21:37:37:driver-hash-chip.c:591:recalc_invalid_volt: chain 0 domain 09 column 01 single core_domain: no useful core domain volt: 0.00 0.00 0.00 0.00.
    2021-03-09 21:37:37:driver-hash-chip.c:591:recalc_invalid_volt: chain 0 domain 09 column 02 single core_domain: no useful core domain volt: 0.00 0.00 0.00 0.00.
    2021-03-09 21:37:37:driver-hash-chip.c:591:recalc_invalid_volt: chain 0 domain 09 column 03 single core_domain: no useful core domain volt: 0.00 0.00 0.00 0.00.
    2021-03-09 21:37:37:driver-hash-chip.c:591:recalc_invalid_volt: chain 0 domain 09 column 04 single core_domain: no useful core domain volt: 0.00 0.00 0.00 0.00.
    2021-03-09 21:37:37:driver-hash-chip.c:591:recalc_invalid_volt: chain 0 domain 09 column 05 single core_domain: no useful core domain volt: 0.00 0.00 0.00 0.00.
    2021-03-09 21:37:37:driver-hash-chip.c:591:recalc_invalid_volt: chain 0 domain 09 column 06 single core_domain: no useful core domain volt: 0.00 0.00 0.00 0.00.
    2021-03-09 21:37:37:driver-hash-chip.c:591:recalc_invalid_volt: chain 0 domain 09 column 07 single core_domain: no useful core domain volt: 0.00 0.00 0.00 0.00.
    2021-03-09 21:37:37:driver-hash-chip.c:591:recalc_invalid_volt: chain 0 domain 09 column 08 single core_domain: no useful core domain volt: 0.00 0.00 0.00 0.00.
    2021-03-09 21:37:37:driver-hash-chip.c:591:recalc_invalid_volt: chain 0 domain 10 column 00 single core_domain: no useful core domain volt: 0.00 0.00 0.00 0.00.
    2021-03-09 21:37:37:driver-hash-chip.c:591:recalc_invalid_volt: chain 0 domain 10 column 01 single core_domain: no useful core domain volt: 0.00 0.00 0.00 0.00.
    2021-03-09 21:37:37:driver-hash-chip.c:591:recalc_invalid_volt: chain 0 domain 10 column 02 single core_domain: no useful core domain volt: 0.00 0.00 0.00 0.00.
    2021-03-09 21:37:37:driver-hash-chip.c:591:recalc_invalid_volt: chain 0 domain 10 column 03 single core_domain: no useful core domain volt: 0.00 0.00 0.00 0.00.
    2021-03-09 21:37:37:driver-hash-chip.c:591:recalc_invalid_volt: chain 0 domain 10 column 04 single core_domain: no useful core domain volt: 0.00 0.00 0.00 0.00.
    2021-03-09 21:37:37:driver-hash-chip.c:591:recalc_invalid_volt: chain 0 domain 10 column 05 single core_domain: no useful core domain volt: 0.00 0.00 0.00 0.00.
    2021-03-09 21:37:37:driver-hash-chip.c:591:recalc_invalid_volt: chain 0 domain 10 column 06 single core_domain: no useful core domain volt: 0.00 0.00 0.00 0.00.
    2021-03-09 21:37:37:driver-hash-chip.c:591:recalc_invalid_volt: chain 0 domain 10 column 07 single core_domain: no useful core domain volt: 0.00 0.00 0.00 0.00.
    2021-03-09 21:37:37:driver-hash-chip.c:591:recalc_invalid_volt: chain 0 domain 10 column 08 single core_domain: no useful core domain volt: 0.00 0.00 0.00 0.00.
    2021-03-09 21:37:37:driver-hash-chip.c:591:recalc_invalid_volt: chain 0 domain 11 column 00 single core_domain: no useful core domain volt: 0.00 0.00 0.00 0.00.
    2021-03-09 21:37:37:driver-hash-chip.c:591:recalc_invalid_volt: chain 0 domain 11 column 01 single core_domain: no useful core domain volt: 0.00 0.00 0.00 0.00.
    2021-03-09 21:37:37:driver-hash-chip.c:591:recalc_invalid_volt: chain 0 domain 11 column 02 single core_domain: no useful core domain volt: 0.00 0.00 0.00 0.00.
    2021-03-09 21:37:37:driver-hash-chip.c:591:recalc_invalid_volt: chain 0 domain 11 column 03 single core_domain: no useful core domain volt: 0.00 0.00 0.00 0.00.
    2021-03-09 21:37:37:driver-hash-chip.c:591:recalc_invalid_volt: chain 0 domain 11 column 04 single core_domain: no useful core domain volt: 0.00 0.00 0.00 0.00.
    2021-03-09 21:37:37:driver-hash-chip.c:591:recalc_invalid_volt: chain 0 domain 11 column 05 single core_domain: no useful core domain volt: 0.00 0.00 0.00 0.00.
    2021-03-09 21:37:37:driver-hash-chip.c:591:recalc_invalid_volt: chain 0 domain 11 column 06 single core_domain: no useful core domain volt: 0.00 0.00 0.00 0.00.
    2021-03-09 21:37:37:driver-hash-chip.c:591:recalc_invalid_volt: chain 0 domain 11 column 07 single core_domain: no useful core domain volt: 0.00 0.00 0.00 0.00.
    2021-03-09 21:37:37:driver-hash-chip.c:591:recalc_invalid_volt: chain 0 domain 11 column 08 single core_domain: no useful core domain volt: 0.00 0.00 0.00 0.00.
    2021-03-09 21:37:37:driver-hash-chip.c:591:recalc_invalid_volt: chain 0 domain 12 column 00 single core_domain: no useful core domain volt: 0.00 0.00 0.00 0.00.
    2021-03-09 21:37:37:driver-hash-chip.c:591:recalc_invalid_volt: chain 0 domain 12 column 01 single core_domain: no useful core domain volt: 0.00 0.00 0.00 0.00.
    2021-03-09 21:37:37:driver-hash-chip.c:591:recalc_invalid_volt: chain 0 domain 12 column 02 single core_domain: no useful core domain volt: 0.00 0.00 0.00 0.00.
    2021-03-09 21:37:37:driver-hash-chip.c:591:recalc_invalid_volt: chain 0 domain 12 column 03 single core_domain: no useful core domain volt: 0.00 0.00 0.00 0.00.
    2021-03-09 21:37:37:driver-hash-chip.c:591:recalc_invalid_volt: chain 0 domain 12 column 04 single core_domain: no useful core domain volt: 0.00 0.00 0.00 0.00.
    2021-03-09 21:37:37:driver-hash-chip.c:591:recalc_invalid_volt: chain 0 domain 12 column 05 single core_domain: no useful core domain volt: 0.00 0.00 0.00 0.00.
    2021-03-09 21:37:37:driver-hash-chip.c:591:recalc_invalid_volt: chain 0 domain 12 column 06 single core_domain: no useful core domain volt: 0.00 0.00 0.00 0.00.
    2021-03-09 21:37:37:driver-hash-chip.c:591:recalc_invalid_volt: chain 0 domain 12 column 07 single core_domain: no useful core domain volt: 0.00 0.00 0.00 0.00.
    2021-03-09 21:37:37:driver-hash-chip.c:591:recalc_invalid_volt: chain 0 domain 12 column 08 single core_domain: no useful core domain volt: 0.00 0.00 0.00 0.00.
    2021-03-09 21:37:37:driver-hash-chip.c:591:recalc_invalid_volt: chain 0 domain 13 column 00 single core_domain: no useful core domain volt: 0.00 0.00 0.00 0.00.
    2021-03-09 21:37:37:driver-hash-chip.c:591:recalc_invalid_volt: chain 0 domain 13 column 01 single core_domain: no useful core domain volt: 0.00 0.00 0.00 0.00.
    2021-03-09 21:37:37:driver-hash-chip.c:591:recalc_invalid_volt: chain 0 domain 13 column 02 single core_domain: no useful core domain volt: 0.00 0.00 0.00 0.00.
    2021-03-09 21:37:37:driver-hash-chip.c:591:recalc_invalid_volt: chain 0 domain 13 column 03 single core_domain: no useful core domain volt: 0.00 0.00 0.00 0.00.
    2021-03-09 21:37:37:driver-hash-chip.c:591:recalc_invalid_volt: chain 0 domain 13 column 04 single core_domain: no useful core domain volt: 0.00 0.00 0.00 0.00.
    2021-03-09 21:37:37:driver-hash-chip.c:591:recalc_invalid_volt: chain 0 domain 13 column 05 single core_domain: no useful core domain volt: 0.00 0.00 0.00 0.00.
    2021-03-09 21:37:37:driver-hash-chip.c:591:recalc_invalid_volt: chain 0 domain 13 column 06 single core_domain: no useful core domain volt: 0.00 0.00 0.00 0.00.
    2021-03-09 21:37:37:driver-hash-chip.c:591:recalc_invalid_volt: chain 0 domain 13 column 07 single core_domain: no useful core domain volt: 0.00 0.00 0.00 0.00.
    2021-03-09 21:37:37:driver-hash-chip.c:591:recalc_invalid_volt: chain 0 domain 13 column 08 single core_domain: no useful core domain volt: 0.00 0.00 0.00 0.00.
    2021-03-09 21:37:37:driver-hash-chip.c:591:recalc_invalid_volt: chain 0 domain 14 column 00 single core_domain: no useful core domain volt: 0.00 0.00 0.00 0.00.
    2021-03-09 21:37:37:driver-hash-chip.c:591:recalc_invalid_volt: chain 0 domain 14 column 01 single core_domain: no useful core domain volt: 0.00 0.00 0.00 0.00.
    2021-03-09 21:37:37:driver-hash-chip.c:591:recalc_invalid_volt: chain 0 domain 14 column 02 single core_domain: no useful core domain volt: 0.00 0.00 0.00 0.00.
    2021-03-09 21:37:37:driver-hash-chip.c:591:recalc_invalid_volt: chain 0 domain 14 column 03 single core_domain: no useful core domain volt: 0.00 0.00 0.00 0.00.
    2021-03-09 21:37:37:driver-hash-chip.c:591:recalc_invalid_volt: chain 0 domain 14 column 04 single core_domain: no useful core domain volt: 0.00 0.00 0.00 0.00.
    2021-03-09 21:37:37:driver-hash-chip.c:591:recalc_invalid_volt: chain 0 domain 14 column 05 single core_domain: no useful core domain volt: 0.00 0.00 0.00 0.00.
    2021-03-09 21:37:37:driver-hash-chip.c:591:recalc_invalid_volt: chain 0 domain 14 column 06 single core_domain: no useful core domain volt: 0.00 0.00 0.00 0.00.
    2021-03-09 21:37:37:driver-hash-chip.c:591:recalc_invalid_volt: chain 0 domain 14 column 07 single core_domain: no useful core domain volt: 0.00 0.00 0.00 0.00.
    2021-03-09 21:37:37:driver-hash-chip.c:591:recalc_invalid_volt: chain 0 domain 14 column 08 single core_domain: no useful core domain volt: 0.00 0.00 0.00 0.00.
    2021-03-09 21:37:37:driver-hash-chip.c:707:dump_adc_voltage_v2: chain 0 domain 03 core_domain 0: all asic timeout or overrange.
    2021-03-09 21:37:37:driver-hash-chip.c:707:dump_adc_voltage_v2: chain 0 domain 03 core_domain 1: all asic timeout or overrange.
    2021-03-09 21:37:37:driver-hash-chip.c:707:dump_adc_voltage_v2: chain 0 domain 03 core_domain 2: all asic timeout or overrange.
    2021-03-09 21:37:37:driver-hash-chip.c:707:dump_adc_voltage_v2: chain 0 domain 03 core_domain 3: all asic timeout or overrange.
    2021-03-09 21:37:37:driver-hash-chip.c:707:dump_adc_voltage_v2: chain 0 domain 04 core_domain 0: all asic timeout or overrange.
    2021-03-09 21:37:37:driver-hash-chip.c:707:dump_adc_voltage_v2: chain 0 domain 04 core_domain 1: all asic timeout or overrange.
    2021-03-09 21:37:37:driver-hash-chip.c:707:dump_adc_voltage_v2: chain 0 domain 04 core_domain 2: all asic timeout or overrange.
    2021-03-09 21:37:37:driver-hash-chip.c:707:dump_adc_voltage_v2: chain 0 domain 04 core_domain 3: all asic timeout or overrange.
    2021-03-09 21:37:37:driver-hash-chip.c:707:dump_adc_voltage_v2: chain 0 domain 05 core_domain 0: all asic timeout or overrange.
    2021-03-09 21:37:37:driver-hash-chip.c:707:dump_adc_voltage_v2: chain 0 domain 05 core_domain 1: all asic timeout or overrange.
    2021-03-09 21:37:37:driver-hash-chip.c:707:dump_adc_voltage_v2: chain 0 domain 05 core_domain 2: all asic timeout or overrange.
    2021-03-09 21:37:37:driver-hash-chip.c:707:dump_adc_voltage_v2: chain 0 domain 05 core_domain 3: all asic timeout or overrange.
    2021-03-09 21:37:37:driver-hash-chip.c:707:dump_adc_voltage_v2: chain 0 domain 06 core_domain 0: all asic timeout or overrange.
    2021-03-09 21:37:37:driver-hash-chip.c:707:dump_adc_voltage_v2: chain 0 domain 06 core_domain 1: all asic timeout or overrange.
    2021-03-09 21:37:37:driver-hash-chip.c:707:dump_adc_voltage_v2: chain 0 domain 06 core_domain 2: all asic timeout or overrange.
    2021-03-09 21:37:37:driver-hash-chip.c:707:dump_adc_voltage_v2: chain 0 domain 06 core_domain 3: all asic timeout or overrange.
    2021-03-09 21:37:37:driver-hash-chip.c:707:dump_adc_voltage_v2: chain 0 domain 07 core_domain 0: all asic timeout or overrange.
    2021-03-09 21:37:37:driver-hash-chip.c:707:dump_adc_voltage_v2: chain 0 domain 07 core_domain 1: all asic timeout or overrange.
    2021-03-09 21:37:37:driver-hash-chip.c:707:dump_adc_voltage_v2: chain 0 domain 07 core_domain 2: all asic timeout or overrange.
    2021-03-09 21:37:37:driver-hash-chip.c:707:dump_adc_voltage_v2: chain 0 domain 07 core_domain 3: all asic timeout or overrange.
    2021-03-09 21:37:37:driver-hash-chip.c:707:dump_adc_voltage_v2: chain 0 domain 08 core_domain 0: all asic timeout or overrange.
    2021-03-09 21:37:37:driver-hash-chip.c:707:dump_adc_voltage_v2: chain 0 domain 08 core_domain 1: all asic timeout or overrange.
    2021-03-09 21:37:37:driver-hash-chip.c:707:dump_adc_voltage_v2: chain 0 domain 08 core_domain 2: all asic timeout or overrange.
    2021-03-09 21:37:37:driver-hash-chip.c:707:dump_adc_voltage_v2: chain 0 domain 08 core_domain 3: all asic timeout or overrange.
    2021-03-09 21:37:37:driver-hash-chip.c:707:dump_adc_voltage_v2: chain 0 domain 09 core_domain 0: all asic timeout or overrange.
    2021-03-09 21:37:37:driver-hash-chip.c:707:dump_adc_voltage_v2: chain 0 domain 09 core_domain 1: all asic timeout or overrange.
    2021-03-09 21:37:37:driver-hash-chip.c:707:dump_adc_voltage_v2: chain 0 domain 09 core_domain 2: all asic timeout or overrange.
    2021-03-09 21:37:37:driver-hash-chip.c:707:dump_adc_voltage_v2: chain 0 domain 09 core_domain 3: all asic timeout or overrange.
    2021-03-09 21:37:37:driver-hash-chip.c:707:dump_adc_voltage_v2: chain 0 domain 10 core_domain 0: all asic timeout or overrange.
    2021-03-09 21:37:37:driver-hash-chip.c:707:dump_adc_voltage_v2: chain 0 domain 10 core_domain 1: all asic timeout or overrange.
    2021-03-09 21:37:37:driver-hash-chip.c:707:dump_adc_voltage_v2: chain 0 domain 10 core_domain 2: all asic timeout or overrange.
    2021-03-09 21:37:37:driver-hash-chip.c:707:dump_adc_voltage_v2: chain 0 domain 10 core_domain 3: all asic timeout or overrange.
    2021-03-09 21:37:37:driver-hash-chip.c:707:dump_adc_voltage_v2: chain 0 domain 11 core_domain 0: all asic timeout or overrange.
    2021-03-09 21:37:37:driver-hash-chip.c:707:dump_adc_voltage_v2: chain 0 domain 11 core_domain 1: all asic timeout or overrange.
    2021-03-09 21:37:37:driver-hash-chip.c:707:dump_adc_voltage_v2: chain 0 domain 11 core_domain 2: all asic timeout or overrange.
    2021-03-09 21:37:37:driver-hash-chip.c:707:dump_adc_voltage_v2: chain 0 domain 11 core_domain 3: all asic timeout or overrange.
    2021-03-09 21:37:37:driver-hash-chip.c:707:dump_adc_voltage_v2: chain 0 domain 12 core_domain 0: all asic timeout or overrange.
    2021-03-09 21:37:37:driver-hash-chip.c:707:dump_adc_voltage_v2: chain 0 domain 12 core_domain 1: all asic timeout or overrange.
    2021-03-09 21:37:37:driver-hash-chip.c:707:dump_adc_voltage_v2: chain 0 domain 12 core_domain 2: all asic timeout or overrange.
    2021-03-09 21:37:37:driver-hash-chip.c:707:dump_adc_voltage_v2: chain 0 domain 12 core_domain 3: all asic timeout or overrange.
    2021-03-09 21:37:37:driver-hash-chip.c:707:dump_adc_voltage_v2: chain 0 domain 13 core_domain 0: all asic timeout or overrange.
    2021-03-09 21:37:37:driver-hash-chip.c:707:dump_adc_voltage_v2: chain 0 domain 13 core_domain 1: all asic timeout or overrange.
    2021-03-09 21:37:37:driver-hash-chip.c:707:dump_adc_voltage_v2: chain 0 domain 13 core_domain 2: all asic timeout or overrange.
    2021-03-09 21:37:37:driver-hash-chip.c:707:dump_adc_voltage_v2: chain 0 domain 13 core_domain 3: all asic timeout or overrange.
    2021-03-09 21:37:37:driver-hash-chip.c:707:dump_adc_voltage_v2: chain 0 domain 14 core_domain 0: all asic timeout or overrange.
    2021-03-09 21:37:37:driver-hash-chip.c:707:dump_adc_voltage_v2: chain 0 domain 14 core_domain 1: all asic timeout or overrange.
    2021-03-09 21:37:37:driver-hash-chip.c:707:dump_adc_voltage_v2: chain 0 domain 14 core_domain 2: all asic timeout or overrange.
    2021-03-09 21:37:37:driver-hash-chip.c:707:dump_adc_voltage_v2: chain 0 domain 14 core_domain 3: all asic timeout or overrange.
    2021-03-09 21:37:37:driver-hash-chip.c:737:dump_adc_voltage_v2: get ADC_DATAOUT from chain 0 with 432 regs timeout.
    chain 0 domain 0: d0 0.381, d1 0.371, d2 0.369, d3 0.364, sum = 1.485067
    chain 0 domain 1: d0 0.282, d1 0.270, d2 0.272, d3 0.275, sum = 1.099854
    chain 0 domain 2: d0 0.212, d1 0.204, d2 0.202, d3 0.205, sum = 0.822428
    chain 0 domain 3: x d0 0.000, x d1 0.000, x d2 0.000, x d3 0.000, x sum = 0.000000
    chain 0 domain 4: x d0 0.000, x d1 0.000, x d2 0.000, x d3 0.000, x sum = 0.000000
    chain 0 domain 5: x d0 0.000, x d1 0.000, x d2 0.000, x d3 0.000, x sum = 0.000000
    chain 0 domain 6: x d0 0.000, x d1 0.000, x d2 0.000, x d3 0.000, x sum = 0.000000
    chain 0 domain 7: x d0 0.000, x d1 0.000, x d2 0.000, x d3 0.000, x sum = 0.000000
    chain 0 domain 8: x d0 0.000, x d1 0.000, x d2 0.000, x d3 0.000, x sum = 0.000000
    chain 0 domain 9: x d0 0.000, x d1 0.000, x d2 0.000, x d3 0.000, x sum = 0.000000
    chain 0 domain 10: x d0 0.000, x d1 0.000, x d2 0.000, x d3 0.000, x sum = 0.000000
    chain 0 domain 11: x d0 0.000, x d1 0.000, x d2 0.000, x d3 0.000, x sum = 0.000000
    chain 0 domain 12: x d0 0.000, x d1 0.000, x d2 0.000, x d3 0.000, x sum = 0.000000
    chain 0 domain 13: x d0 0.000, x d1 0.000, x d2 0.000, x d3 0.000, x sum = 0.000000
    chain 0 domain 14: x d0 0.000, x d1 0.000, x d2 0.000, x d3 0.000, x sum = 0.000000
    2021-03-09 21:37:38:driver-hash-chip.c:737:dump_adc_voltage_v2: get ADC_DATAOUT from chain 1 with 0 regs timeout.
    chain 1 domain 0: d0 0.407, d1 0.399, d2 0.402, d3 0.403, sum = 1.610962
    chain 1 domain 1: d0 0.344, d1 0.333, d2 0.335, d3 0.350, sum = 1.362549
    chain 1 domain 2: d0 0.294, d1 0.282, d2 0.281, d3 0.286, sum = 1.142863
    chain 1 domain 3: d0 0.273, d1 0.263, d2 0.268, d3 0.275, sum = 1.079224
    chain 1 domain 4: d0 0.257, d1 0.247, d2 0.246, d3 0.259, sum = 1.008423
    chain 1 domain 5: d0 0.319, d1 0.306, d2 0.310, d3 0.321, sum = 1.256185
    chain 1 domain 6: d0 0.335, d1 0.321, d2 0.321, d3 0.328, sum = 1.303711
    chain 1 domain 7: d0 0.344, d1 0.324, d2 0.327, d3 0.345, sum = 1.339518
    chain 1 domain 8: d0 0.359, d1 0.350, d2 0.344, d3 0.351, sum = 1.404378
    chain 1 domain 9: d0 0.390, d1 0.378, d2 0.375, d3 0.356, sum = 1.497640
    chain 1 domain 10: d0 0.361, d1 0.354, d2 0.348, d3 0.353, sum = 1.415324
    chain 1 domain 11: d0 0.372, d1 0.360, d2 0.361, d3 0.376, sum = 1.468953
    chain 1 domain 12: d0 0.360, d1 0.352, d2 0.350, d3 0.363, sum = 1.425537
    chain 1 domain 13: d0 0.411, d1 0.405, d2 0.409, d3 0.408, sum = 1.632528
    chain 1 domain 14: d0 0.438, d1 0.428, d2 0.431, d3 0.432, sum = 1.728841
    2021-03-09 21:37:39:driver-hash-chip.c:737:dump_adc_voltage_v2: get ADC_DATAOUT from chain 2 with 0 regs timeout.
    chain 2 domain 0: d0 0.442, d1 0.438, d2 0.438, d3 0.440, sum = 1.758952
    chain 2 domain 1: d0 0.364, d1 0.361, d2 0.359, d3 0.363, sum = 1.447591
    chain 2 domain 2: d0 0.303, d1 0.296, d2 0.293, d3 0.300, sum = 1.192790
    chain 2 domain 3: d0 0.264, d1 0.262, d2 0.260, d3 0.264, sum = 1.050537
    chain 2 domain 4: d0 0.256, d1 0.256, d2 0.259, d3 0.267, sum = 1.038411
    chain 2 domain 5: d0 0.251, d1 0.253, d2 0.253, d3 0.260, sum = 1.017293
    chain 2 domain 6: d0 0.346, d1 0.342, d2 0.342, d3 0.350, sum = 1.380086
    chain 2 domain 7: d0 0.368, d1 0.365, d2 0.368, d3 0.376, sum = 1.476807
    chain 2 domain 8: d0 0.413, d1 0.404, d2 0.407, d3 0.408, sum = 1.631836
    chain 2 domain 9: d0 0.371, d1 0.363, d2 0.365, d3 0.371, sum = 1.469564
    chain 2 domain 10: d0 0.362, d1 0.356, d2 0.357, d3 0.365, sum = 1.439901
    chain 2 domain 11: d0 0.338, d1 0.330, d2 0.328, d3 0.337, sum = 1.333089
    chain 2 domain 12: d0 0.335, d1 0.329, d2 0.332, d3 0.340, sum = 1.336060
    chain 2 domain 13: d0 0.387, d1 0.377, d2 0.378, d3 0.359, sum = 1.500488
    chain 2 domain 14: d0 0.403, d1 0.398, d2 0.401, d3 0.400, sum = 1.601685
    2021-03-09 21:37:39:driver-hash-chip.c:486:check_adc_voltage: FAIL domain volt check: chain 0 domain 03 volt 0.000 less then request 0.800 (index 0)
    2021-03-09 21:37:39:driver-hash-chip.c:486:check_adc_voltage: FAIL domain volt check: chain 0 domain 04 volt 0.000 less then request 0.800 (index 0)
    2021-03-09 21:37:39:driver-hash-chip.c:486:check_adc_voltage: FAIL domain volt check: chain 0 domain 05 volt 0.000 less then request 0.800 (index 0)
    2021-03-09 21:37:39:driver-hash-chip.c:486:check_adc_voltage: FAIL domain volt check: chain 0 domain 06 volt 0.000 less then request 0.800 (index 0)
    2021-03-09 21:37:39:driver-hash-chip.c:486:check_adc_voltage: FAIL domain volt check: chain 0 domain 07 volt 0.000 less then request 0.800 (index 0)
    2021-03-09 21:37:39:driver-hash-chip.c:486:check_adc_voltage: FAIL domain volt check: chain 0 domain 08 volt 0.000 less then request 0.800 (index 0)
    2021-03-09 21:37:39:driver-hash-chip.c:486:check_adc_voltage: FAIL domain volt check: chain 0 domain 09 volt 0.000 less then request 0.800 (index 0)
    2021-03-09 21:37:39:driver-hash-chip.c:486:check_adc_voltage: FAIL domain volt check: chain 0 domain 10 volt 0.000 less then request 0.800 (index 0)
    2021-03-09 21:37:39:driver-hash-chip.c:486:check_adc_voltage: FAIL domain volt check: chain 0 domain 11 volt 0.000 less then request 0.800 (index 0)
    2021-03-09 21:37:39:driver-hash-chip.c:486:check_adc_voltage: FAIL domain volt check: chain 0 domain 12 volt 0.000 less then request 0.800 (index 0)
    2021-03-09 21:37:39:driver-hash-chip.c:486:check_adc_voltage: FAIL domain volt check: chain 0 domain 13 volt 0.000 less then request 0.800 (index 0)
    2021-03-09 21:37:39:driver-hash-chip.c:486:check_adc_voltage: FAIL domain volt check: chain 0 domain 14 volt 0.000 less then request 0.800 (index 0)
    2021-03-09 21:37:45:frequency.c:623:inc_freq_with_fixed_vco: get pcb 45 ~ 66, chip_temp 53 ~ 77, now 218.4s, target 77.4
    2021-03-09 21:37:46:frequency.c:623:inc_freq_with_fixed_vco: get pcb 45 ~ 67, chip_temp 52 ~ 76, now 219.4s, target 77.6
    2021-03-09 21:37:47:frequency.c:623:inc_freq_with_fixed_vco: get pcb 44 ~ 67, chip_temp 52 ~ 76, now 220.4s, target 77.7
    2021-03-09 21:37:48:frequency.c:623:inc_freq_with_fixed_vco: get pcb 44 ~ 67, chip_temp 51 ~ 76, now 221.5s, target 77.9
    2021-03-09 21:37:49:frequency.c:623:inc_freq_with_fixed_vco: get pcb 44 ~ 68, chip_temp 52 ~ 77, now 222.5s, target 78.1
    2021-03-09 21:37:50:frequency.c:623:inc_freq_with_fixed_vco: get pcb 44 ~ 67, chip_temp 52 ~ 76, now 223.5s, target 78.2
    2021-03-09 21:37:50:frequency.c:657:inc_freq_with_fixed_vco: [4] _POSTDIV1 = 6, _POSTDIV2 = 5, USER_DIV = 1, freq = 68
    2021-03-09 21:37:50:frequency.c:665:inc_freq_with_fixed_vco: set to 68M, get pcb 44 ~ 67, chip_temp 52 ~ 76
    2021-03-09 21:37:50:frequency.c:671:inc_freq_with_fixed_vco: freq_mode 1=1 FREQ_MODE_USER, Conf.Check_Clock_Cnt=0
    2021-03-09 21:37:50:driver-btm-api.c:1941:check_clock_counter_domain_last_core: freq 68 clock_counter_limit 7, no check, skip.
    2021-03-09 21:37:58:frequency.c:623:inc_freq_with_fixed_vco: get pcb 44 ~ 69, chip_temp 53 ~ 78, now 231.5s, target 79.6
    2021-03-09 21:37:59:frequency.c:623:inc_freq_with_fixed_vco: get pcb 44 ~ 69, chip_temp 53 ~ 79, now 232.5s, target 79.7
    2021-03-09 21:38:00:frequency.c:623:inc_freq_with_fixed_vco: get pcb 43 ~ 69, chip_temp 54 ~ 79, now 233.5s, target 79.9
    2021-03-09 21:38:01:frequency.c:623:inc_freq_with_fixed_vco: get pcb 44 ~ 69, chip_temp 53 ~ 80, now 234.5s, target 80.1
    2021-03-09 21:38:02:frequency.c:623:inc_freq_with_fixed_vco: get pcb 44 ~ 70, chip_temp 53 ~ 80, now 235.5s, target 80.2
    2021-03-09 21:38:03:frequency.c:623:inc_freq_with_fixed_vco: get pcb 44 ~ 70, chip_temp 53 ~ 80, now 236.5s, target 80.4
    2021-03-09 21:38:04:frequency.c:623:inc_freq_with_fixed_vco: get pcb 44 ~ 70, chip_temp 54 ~ 80, now 237.5s, target 80.6
    2021-03-09 21:38:05:frequency.c:623:inc_freq_with_fixed_vco: get pcb 44 ~ 71, chip_temp 54 ~ 80, now 238.5s, target 80.7
    2021-03-09 21:38:06:frequency.c:623:inc_freq_with_fixed_vco: get pcb 43 ~ 70, chip_temp 54 ~ 80, now 239.5s, target 80.9
    2021-03-09 21:38:07:frequency.c:623:inc_freq_with_fixed_vco: get pcb 44 ~ 71, chip_temp 54 ~ 80, now 240.5s, target 81.1
    2021-03-09 21:38:08:frequency.c:623:inc_freq_with_fixed_vco: get pcb 43 ~ 70, chip_temp 54 ~ 81, now 241.5s, target 81.2
    2021-03-09 21:38:09:frequency.c:623:inc_freq_with_fixed_vco: get pcb 43 ~ 71, chip_temp 54 ~ 81, now 242.5s, target 81.4
    2021-03-09 21:38:10:frequency.c:623:inc_freq_with_fixed_vco: get pcb 44 ~ 71, chip_temp 54 ~ 81, now 243.5s, target 81.6
    2021-03-09 21:38:11:frequency.c:623:inc_freq_with_fixed_vco: get pcb 44 ~ 71, chip_temp 54 ~ 81, now 244.5s, target 81.7
    2021-03-09 21:38:12:frequency.c:623:inc_freq_with_fixed_vco: get pcb 44 ~ 71, chip_temp 54 ~ 82, now 245.5s, target 81.9
    2021-03-09 21:38:12:frequency.c:644:inc_freq_with_fixed_vco: heat speed too fast! current_temp 82 > 81.9 target_temp.
    2021-03-09 21:38:18:frequency.c:623:inc_freq_with_fixed_vco: get pcb 43 ~ 72, chip_temp 54 ~ 83, now 251.5s, target 82.9
    2021-03-09 21:38:18:frequency.c:644:inc_freq_with_fixed_vco: heat speed too fast! current_temp 83 > 82.9 target_temp.
    2021-03-09 21:38:24:frequency.c:623:inc_freq_with_fixed_vco: get pcb 43 ~ 74, chip_temp 55 ~ 84, now 257.5s, target 83.9
    2021-03-09 21:38:24:frequency.c:644:inc_freq_with_fixed_vco: heat speed too fast! current_temp 84 > 83.9 target_temp.
    2021-03-09 21:38:30:frequency.c:623:inc_freq_with_fixed_vco: get pcb 44 ~ 75, chip_temp 56 ~ 85, now 263.5s, target 84.9
    2021-03-09 21:38:30:frequency.c:644:inc_freq_with_fixed_vco: heat speed too fast! current_temp 85 > 84.9 target_temp.
    2021-03-09 21:38:36:frequency.c:623:inc_freq_with_fixed_vco: get pcb 43 ~ 76, chip_temp 56 ~ 87, now 269.5s, target 85.9
    2021-03-09 21:38:36:frequency.c:644:inc_freq_with_fixed_vco: heat speed too fast! current_temp 87 > 85.9 target_temp.
    2021-03-09 21:38:42:frequency.c:623:inc_freq_with_fixed_vco: get pcb 44 ~ 78, chip_temp 57 ~ 89, now 275.5s, target 86.9
    2021-03-09 21:38:42:frequency.c:644:inc_freq_with_fixed_vco: heat speed too fast! current_temp 89 > 86.9 target_temp.
    2021-03-09 21:38:48:frequency.c:623:inc_freq_with_fixed_vco: get pcb 43 ~ 78, chip_temp 57 ~ 90, now 281.5s, target 87.9
    2021-03-09 21:38:48:frequency.c:644:inc_freq_with_fixed_vco: heat speed too fast! current_temp 90 > 87.9 target_temp.
    2021-03-09 21:38:54:frequency.c:623:inc_freq_with_fixed_vco: get pcb 43 ~ 78, chip_temp 57 ~ 91, now 287.5s, target 88.9
    2021-03-09 21:38:54:frequency.c:644:inc_freq_with_fixed_vco: heat speed too fast! current_temp 91 > 88.9 target_temp.

    0
    Comment actions Permalink

    And with two hashboards:

     

    Booting Linux on physical CPU 0x0
    Linux version 4.6.0-xilinx-gff8137b-dirty (lzq@armdev2) (gcc version 4.8.3 20140320 (prerelease) (Sourcery CodeBench Lite 2014.05-23) ) #25 SMP PREEMPT Fri Nov 23 15:30:52 CST 2018
    CPU: ARMv7 Processor [413fc090] revision 0 (ARMv7), cr=18c5387d
    CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
    Machine model: Xilinx Zynq
    cma: Reserved 16 MiB at 0x0e000000
    Memory policy: Data cache writealloc
    On node 0 totalpages: 61440
    free_area_init_node: node 0, pgdat c0b39280, node_mem_map cde10000
    Normal zone: 480 pages used for memmap
    Normal zone: 0 pages reserved
    Normal zone: 61440 pages, LIFO batch:15
    percpu: Embedded 12 pages/cpu @cddf1000 s19776 r8192 d21184 u49152
    pcpu-alloc: s19776 r8192 d21184 u49152 alloc=12*4096
    pcpu-alloc: [0] 0 [0] 1
    Built 1 zonelists in Zone order, mobility grouping on. Total pages: 60960
    Kernel command line: mem=240M console=ttyPS0,115200 ramdisk_size=33554432 root=/dev/ram rw earlyprintk
    PID hash table entries: 1024 (order: 0, 4096 bytes)
    Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
    Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
    Memory: 195688K/245760K available (6345K kernel code, 231K rwdata, 1896K rodata, 1024K init, 223K bss, 33688K reserved, 16384K cma-reserved, 0K highmem)
    Virtual kernel memory layout:
    vector : 0xffff0000 - 0xffff1000 ( 4 kB)
    fixmap : 0xffc00000 - 0xfff00000 (3072 kB)
    vmalloc : 0xcf800000 - 0xff800000 ( 768 MB)
    lowmem : 0xc0000000 - 0xcf000000 ( 240 MB)
    pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
    modules : 0xbf000000 - 0xbfe00000 ( 14 MB)
    .text : 0xc0008000 - 0xc090c424 (9234 kB)
    .init : 0xc0a00000 - 0xc0b00000 (1024 kB)
    .data : 0xc0b00000 - 0xc0b39fe0 ( 232 kB)
    .bss : 0xc0b39fe0 - 0xc0b71c28 ( 224 kB)
    Preemptible hierarchical RCU implementation.
    Build-time adjustment of leaf fanout to 32.
    RCU restricting CPUs from NR_CPUS=4 to nr_cpu_ids=2.
    RCU: Adjusting geometry for rcu_fanout_leaf=32, nr_cpu_ids=2
    NR_IRQS:16 nr_irqs:16 16
    efuse mapped to cf800000
    ps7-slcr mapped to cf802000
    L2C: platform modifies aux control register: 0x72360000 -> 0x72760000
    L2C: DT/platform modifies aux control register: 0x72360000 -> 0x72760000
    L2C-310 erratum 769419 enabled
    L2C-310 enabling early BRESP for Cortex-A9
    L2C-310 full line of zeros enabled for Cortex-A9
    L2C-310 ID prefetch enabled, offset 1 lines
    L2C-310 dynamic clock gating enabled, standby mode enabled
    L2C-310 cache controller enabled, 8 ways, 512 kB
    L2C-310: CACHE_ID 0x410000c8, AUX_CTRL 0x76760001
    zynq_clock_init: clkc starts at cf802100
    Zynq clock init
    sched_clock: 64 bits at 333MHz, resolution 3ns, wraps every 4398046511103ns
    clocksource: arm_global_timer: mask: 0xffffffffffffffff max_cycles: 0x4ce07af025, max_idle_ns: 440795209040 ns
    Switching to timer-based delay loop, resolution 3ns
    clocksource: ttc_clocksource: mask: 0xffff max_cycles: 0xffff, max_idle_ns: 537538477 ns
    ps7-ttc #0 at cf80a000, irq=18
    Console: colour dummy device 80x30
    Calibrating delay loop (skipped), value calculated using timer frequency.. 666.66 BogoMIPS (lpj=3333333)
    pid_max: default: 32768 minimum: 301
    Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
    Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
    CPU: Testing write buffer coherency: ok
    CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
    Setting up static identity map for 0x100000 - 0x100058
    CPU1: failed to boot: -1
    Brought up 1 CPUs
    SMP: Total of 1 processors activated (666.66 BogoMIPS).
    CPU: All CPU(s) started in SVC mode.
    devtmpfs: initialized
    VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 4
    clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
    pinctrl core: initialized pinctrl subsystem
    NET: Registered protocol family 16
    DMA: preallocated 256 KiB pool for atomic coherent allocations
    cpuidle: using governor menu
    hw-breakpoint: found 5 (+1 reserved) breakpoint and 1 watchpoint registers.
    hw-breakpoint: maximum watchpoint size is 4 bytes.
    zynq-ocm f800c000.ps7-ocmc: ZYNQ OCM pool: 256 KiB @ 0xcf880000
    vgaarb: loaded
    SCSI subsystem initialized
    usbcore: registered new interface driver usbfs
    usbcore: registered new interface driver hub
    usbcore: registered new device driver usb
    media: Linux media interface: v0.10
    Linux video capture interface: v2.00
    pps_core: LinuxPPS API ver. 1 registered
    pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
    PTP clock support registered
    EDAC MC: Ver: 3.0.0
    Advanced Linux Sound Architecture Driver Initialized.
    clocksource: Switched to clocksource arm_global_timer
    NET: Registered protocol family 2
    TCP established hash table entries: 2048 (order: 1, 8192 bytes)
    TCP bind hash table entries: 2048 (order: 2, 16384 bytes)
    TCP: Hash tables configured (established 2048 bind 2048)
    UDP hash table entries: 256 (order: 1, 8192 bytes)
    UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
    NET: Registered protocol family 1
    RPC: Registered named UNIX socket transport module.
    RPC: Registered udp transport module.
    RPC: Registered tcp transport module.
    RPC: Registered tcp NFSv4.1 backchannel transport module.
    PCI: CLS 0 bytes, default 64
    Trying to unpack rootfs image as initramfs...
    rootfs image is not initramfs (no cpio magic); looks like an initrd
    Freeing initrd memory: 20648K (cc6d7000 - cdb01000)
    hw perfevents: enabled with armv7_cortex_a9 PMU driver, 7 counters available
    futex hash table entries: 512 (order: 3, 32768 bytes)
    workingset: timestamp_bits=28 max_order=16 bucket_order=0
    jffs2: version 2.2. (NAND) (SUMMARY) © 2001-2006 Red Hat, Inc.
    io scheduler noop registered
    io scheduler deadline registered
    io scheduler cfq registered (default)
    dma-pl330 f8003000.ps7-dma: Loaded driver for PL330 DMAC-241330
    dma-pl330 f8003000.ps7-dma: DBUFF-128x8bytes Num_Chans-8 Num_Peri-4 Num_Events-16
    e0000000.serial: ttyPS0 at MMIO 0xe0000000 (irq = 158, base_baud = 6249999) is a xuartps
    console [ttyPS0] enabled
    xdevcfg f8007000.ps7-dev-cfg: ioremap 0xf8007000 to cf86e000
    [drm] Initialized drm 1.1.0 20060810
    brd: module loaded
    loop: module loaded
    CAN device driver interface
    gpiod_set_value: invalid GPIO
    libphy: MACB_mii_bus: probed
    macb e000b000.ethernet eth0: Cadence GEM rev 0x00020118 at 0xe000b000 irq 31 (00:0a:35:00:00:00)
    Generic PHY e000b000.etherne:00: attached PHY driver [Generic PHY] (mii_bus:phy_addr=e000b000.etherne:00, irq=-1)
    e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k
    e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
    ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
    ehci-pci: EHCI PCI platform driver
    usbcore: registered new interface driver usb-storage
    mousedev: PS/2 mouse device common for all mice
    i2c /dev entries driver
    Xilinx Zynq CpuIdle Driver started
    sdhci: Secure Digital Host Controller Interface driver
    sdhci: Copyright(c) Pierre Ossman
    sdhci-pltfm: SDHCI platform and OF driver helper
    mmc0: SDHCI controller on e0100000.ps7-sdio [e0100000.ps7-sdio] using ADMA
    ledtrig-cpu: registered to indicate activity on CPUs
    usbcore: registered new interface driver usbhid
    usbhid: USB HID core driver
    nand: device found, Manufacturer ID: 0x2c, Chip ID: 0xda
    nand: Micron MT29F2G08ABAGAWP
    nand: 256 MiB, SLC, erase size: 128 KiB, page size: 2048, OOB size: 128
    nand: WARNING: pl35x-nand: the ECC used on your system is too weak compared to the one required by the NAND chip
    Bad block table found at page 131008, version 0x01
    Bad block table found at page 130944, version 0x01
    6 ofpart partitions found on MTD device pl35x-nand
    Creating 6 MTD partitions on "pl35x-nand":
    0x000000000000-0x000002800000 : "BOOT.bin-env-dts-kernel"
    0x000002800000-0x000004800000 : "ramfs"
    0x000004800000-0x000005000000 : "configs"
    0x000005000000-0x000006000000 : "reserve"
    0x000006000000-0x000008000000 : "ramfs-bak"
    0x000008000000-0x000010000000 : "reserve1"
    NET: Registered protocol family 10
    sit: IPv6 over IPv4 tunneling driver
    NET: Registered protocol family 17
    can: controller area network core (rev 20120528 abi 9)
    NET: Registered protocol family 29
    can: raw protocol (rev 20120528)
    can: broadcast manager protocol (rev 20120528 t)
    can: netlink gateway (rev 20130117) max_hops=1
    zynq_pm_ioremap: no compatible node found for 'xlnx,zynq-ddrc-a05'
    zynq_pm_late_init: Unable to map DDRC IO memory.
    Registering SWP/SWPB emulation handler
    hctosys: unable to open rtc device (rtc0)
    ALSA device list:
    No soundcards found.
    RAMDISK: gzip image found at block 0
    EXT4-fs (ram0): couldn't mount as ext3 due to feature incompatibilities
    EXT4-fs (ram0): mounted filesystem without journal. Opts: (null)
    VFS: Mounted root (ext4 filesystem) on device 1:0.
    devtmpfs: mounted
    Freeing unused kernel memory: 1024K (c0a00000 - c0b00000)
    EXT4-fs (ram0): re-mounted. Opts: block_validity,delalloc,barrier,user_xattr
    random: dd urandom read with 0 bits of entropy available
    ubi0: attaching mtd2
    ubi0: scanning is finished
    ubi0: attached mtd2 (name "configs", size 8 MiB)
    ubi0: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes
    ubi0: min./max. I/O unit sizes: 2048/2048, sub-page size 2048
    ubi0: VID header offset: 2048 (aligned 2048), data offset: 4096
    ubi0: good PEBs: 64, bad PEBs: 0, corrupted PEBs: 0
    ubi0: user volume: 1, internal volumes: 1, max. volumes count: 128
    ubi0: max/mean erase counter: 38/17, WL threshold: 4096, image sequence number: 2636279313
    ubi0: available PEBs: 0, total reserved PEBs: 64, PEBs reserved for bad PEB handling: 40
    ubi0: background thread "ubi_bgt0d" started, PID 708
    UBIFS (ubi0:0): background thread "ubifs_bgt0_0" started, PID 711
    UBIFS (ubi0:0): recovery needed
    UBIFS (ubi0:0): recovery completed
    UBIFS (ubi0:0): UBIFS: mounted UBI device 0, volume 0, name "configs"
    UBIFS (ubi0:0): LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
    UBIFS (ubi0:0): FS size: 1396736 bytes (1 MiB, 11 LEBs), journal size 888833 bytes (0 MiB, 5 LEBs)
    UBIFS (ubi0:0): reserved for root: 65970 bytes (64 KiB)
    UBIFS (ubi0:0): media format: w4/r0 (latest is w4/r0), UUID A5E2E817-94FA-4998-90AB-D2C873A8EBA9, small LPT model
    ubi1: attaching mtd5
    ubi1: scanning is finished
    ubi1: attached mtd5 (name "reserve1", size 128 MiB)
    ubi1: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes
    ubi1: min./max. I/O unit sizes: 2048/2048, sub-page size 2048
    ubi1: VID header offset: 2048 (aligned 2048), data offset: 4096
    ubi1: good PEBs: 1020, bad PEBs: 4, corrupted PEBs: 0
    ubi1: user volume: 1, internal volumes: 1, max. volumes count: 128
    ubi1: max/mean erase counter: 457/166, WL threshold: 4096, image sequence number: 614900815
    ubi1: available PEBs: 0, total reserved PEBs: 1020, PEBs reserved for bad PEB handling: 36
    ubi1: background thread "ubi_bgt1d" started, PID 720
    UBIFS (ubi1:0): background thread "ubifs_bgt1_0" started, PID 723
    UBIFS (ubi1:0): recovery needed
    UBIFS (ubi1:0): recovery completed
    UBIFS (ubi1:0): UBIFS: mounted UBI device 1, volume 0, name "reserve1"
    UBIFS (ubi1:0): LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
    UBIFS (ubi1:0): FS size: 123039744 bytes (117 MiB, 969 LEBs), journal size 6221824 bytes (5 MiB, 49 LEBs)
    UBIFS (ubi1:0): reserved for root: 4952683 bytes (4836 KiB)
    UBIFS (ubi1:0): media format: w4/r0 (latest is w4/r0), UUID 91DF6B3D-1A99-4241-87C7-EB25097110C1, small LPT model
    IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
    IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
    macb e000b000.ethernet eth0: unable to generate target frequency: 25000000 Hz
    macb e000b000.ethernet eth0: link up (100/Full)
    IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
    macb e000b000.ethernet eth0: link down
    In axi fpga driver!
    request_mem_region OK!
    AXI fpga dev virtual address is 0xcfb54000
    *base_vir_addr = 0xb023
    In fpga mem driver!
    request_mem_region OK!
    fpga mem virtual address is 0xd2000000
    macb e000b000.ethernet eth0: unable to generate target frequency: 25000000 Hz
    macb e000b000.ethernet eth0: link up (100/Full)
    random: nonblocking pool is initialized
    2021-03-09 22:06:26:thread.c:1555:create_bitmain_soc_init_thread: create thread
    2021-03-09 22:06:26:driver-btm-api.c:682:init_freq_mode: This is scan-user version
    2021-03-09 22:06:26:driver-btm-api.c:2518:bitmain_soc_init: Miner compile time: Fri Jan 8 22:31:06 CST 2021 type: Antminer S17e
    2021-03-09 22:06:26:driver-btm-api.c:2519:bitmain_soc_init: commit version: 37668c9 2021-01-08 18:20:11, build by: jenkins 2021-01-08 22:35:52
    2021-03-09 22:06:26:driver-btm-api.c:2520:bitmain_soc_init: opt_multi_version = 1
    2021-03-09 22:06:26:driver-btm-api.c:2521:bitmain_soc_init: opt_bitmain_ab = 1
    2021-03-09 22:06:26:driver-btm-api.c:2522:bitmain_soc_init: mid_auto_gen = 0
    2021-03-09 22:06:26:driver-btm-api.c:2523:bitmain_soc_init: work_mode = 0
    2021-03-09 22:06:26:driver-btm-api.c:2524:bitmain_soc_init: power_feedback_en = true
    2021-03-09 22:06:26:driver-btm-api.c:2067:show_sn: no SN got, please write SN to /config/sn
    2021-03-09 22:06:26:driver-btm-api.c:1384:miner_device_init: Detect 256MB control board of XILINX
    2021-03-09 22:06:26:driver-btm-api.c:1325:init_fan_parameter: fan_eft : 0 fan_pwm : 0
    2021-03-09 22:06:32:driver-btm-api.c:1309:init_miner_version: miner ID : 81322c481540885c
    2021-03-09 22:06:32:driver-btm-api.c:1315:init_miner_version: FPGA Version = 0xB023
    2021-03-09 22:06:36:auto_adapt.c:100:_get_board_info: chain[1] board bin: 1, chip bin: 1, chip ft: A4V4, chip version: AB
    2021-03-09 22:06:36:auto_adapt.c:100:_get_board_info: chain[2] board bin: 1, chip bin: 1, chip ft: A4V4, chip version: AB
    2021-03-09 22:06:36:driver-btm-api.c:2164:get_calibration_voltage: calibration voltage flag is error data.
    2021-03-09 22:06:36 voltage[1] = 1850
    2021-03-09 22:06:36 voltage[2] = 1850
    2021-03-09 22:06:36:auto_adapt.c:273:is_sweep_failed_before: open sweep tag failed
    voltage_ref = 1850
    2100 2100 2100 2100 2100 2100
    2100 2100 2100 2100 2100 2100
    2100 2100 2100 2100 2090 2050
    2100 2090 2080 2060 2030 1960
    2080 2060 2030 2010 1960 1910

    2021-03-09 22:06:36:thread.c:1523:create_read_nonce_reg_thread: create thread
    2021-03-09 22:06:36:driver-btm-api.c:698:dump_pcb_bom_version: Chain [1] PCB Version: 0x0128
    2021-03-09 22:06:36:driver-btm-api.c:699:dump_pcb_bom_version: Chain [1] BOM Version: 0x0100
    2021-03-09 22:06:36:driver-btm-api.c:698:dump_pcb_bom_version: Chain [2] PCB Version: 0x0128
    2021-03-09 22:06:36:driver-btm-api.c:699:dump_pcb_bom_version: Chain [2] BOM Version: 0x0100
    2021-03-09 22:06:42:driver-btm-api.c:2344:bitmain_board_init: Fan check passed.
    2021-03-09 22:06:43:board.c:81:jump_and_app_check_restore_pic: chain[1] PIC jump to app
    2021-03-09 22:06:45:board.c:94:jump_and_app_check_restore_pic: Check chain[1] PIC fw version=0xb9
    2021-03-09 22:06:47:board.c:81:jump_and_app_check_restore_pic: chain[2] PIC jump to app
    2021-03-09 22:06:49:board.c:94:jump_and_app_check_restore_pic: Check chain[2] PIC fw version=0xb9
    2021-03-09 22:06:49:thread.c:1518:create_pic_heart_beat_thread: create thread
    2021-03-09 22:06:50:power_api.c:241:power_init: power type version: 0x0042
    2021-03-09 22:06:52:power_api.c:259:power_init: Power init:
    2021-03-09 22:06:52:power_api.c:260:power_init: current_voltage_raw = 2136
    2021-03-09 22:06:52:power_api.c:261:power_init: highest_voltage_raw = 2000
    2021-03-09 22:06:52:power_api.c:262:power_init: working_voltage_raw = 1800
    2021-03-09 22:06:52:power_api.c:263:power_init: higher_voltage_raw = 1850
    2021-03-09 22:06:52:power_api.c:264:power_init: check_asic_voltage_raw = 1800
    2021-03-09 22:06:52:driver-btm-api.c:2354:bitmain_board_init: Enter 60s sleep to make sure power release finish.
    2021-03-09 22:07:54:driver-btm-api.c:1123:check_asic_number_until_volt_balance: THIS is No.1 time boost asic:
    2021-03-09 22:07:54:power_api.c:334:modify_check_asic_voltage: check_asic_voltage_raw = 1800
    2021-03-09 22:07:57:power_api.c:298:set_to_check_asic_voltage_by_steps: Set to voltage raw 1800, step by step.
    2021-03-09 22:08:20:uart.c:69:set_baud: set UART baud to 115200
    chain 1, IO_DRIVE_STRENGTH_CONFIGURATION reg = 0x 7777777
    2021-03-09 22:08:25:driver-btm-api.c:1035:check_asic_number_with_power_on: Chain[1]: find 135 asic, times 0
    chain 2, IO_DRIVE_STRENGTH_CONFIGURATION reg = 0x 7777777
    2021-03-09 22:08:29:driver-btm-api.c:1035:check_asic_number_with_power_on: Chain[2]: find 135 asic, times 0
    2021-03-09 22:08:29:driver-btm-api.c:1163:check_asic_number_until_volt_balance: PASS: volt balance at No.1 time boost asic.
    2021-03-09 22:08:29:power_api.c:364:set_to_highest_voltage_by_steps: Set to voltage raw 2000, step by step.
    2021-03-09 22:09:04:driver-hash-chip.c:876:set_uart_relay: set uart relay to 0x390003
    2021-03-09 22:09:05:driver-hash-chip.c:1264:set_ldo_ctrl: Set LDO to 0x2000203
    2021-03-09 22:09:05:driver-hash-chip.c:737:dump_adc_voltage_v2: get ADC_DATAOUT from chain 1 with 0 regs timeout.
    chain 1 domain 0: d0 0.343, d1 0.343, d2 0.344, d3 0.347, sum = 1.376709
    chain 1 domain 1: d0 0.334, d1 0.330, d2 0.330, d3 0.338, sum = 1.332723
    chain 1 domain 2: d0 0.322, d1 0.319, d2 0.318, d3 0.318, sum = 1.276937
    chain 1 domain 3: d0 0.321, d1 0.316, d2 0.319, d3 0.320, sum = 1.276530
    chain 1 domain 4: d0 0.326, d1 0.321, d2 0.321, d3 0.326, sum = 1.294637
    chain 1 domain 5: d0 0.349, d1 0.345, d2 0.345, d3 0.349, sum = 1.387492
    chain 1 domain 6: d0 0.338, d1 0.335, d2 0.333, d3 0.336, sum = 1.340739
    chain 1 domain 7: d0 0.328, d1 0.318, d2 0.322, d3 0.328, sum = 1.295776
    chain 1 domain 8: d0 0.330, d1 0.328, d2 0.324, d3 0.327, sum = 1.308065
    chain 1 domain 9: d0 0.344, d1 0.340, d2 0.336, d3 0.340, sum = 1.359863
    chain 1 domain 10: d0 0.321, d1 0.320, d2 0.316, d3 0.316, sum = 1.272461
    chain 1 domain 11: d0 0.334, d1 0.331, d2 0.330, d3 0.338, sum = 1.332194
    chain 1 domain 12: d0 0.311, d1 0.307, d2 0.307, d3 0.312, sum = 1.236654
    chain 1 domain 13: d0 0.338, d1 0.337, d2 0.337, d3 0.341, sum = 1.352946
    chain 1 domain 14: d0 0.341, d1 0.338, d2 0.338, d3 0.342, sum = 1.359049
    2021-03-09 22:09:06:driver-hash-chip.c:737:dump_adc_voltage_v2: get ADC_DATAOUT from chain 2 with 0 regs timeout.
    chain 2 domain 0: d0 0.343, d1 0.345, d2 0.345, d3 0.344, sum = 1.377441
    chain 2 domain 1: d0 0.331, d1 0.333, d2 0.331, d3 0.332, sum = 1.327311
    chain 2 domain 2: d0 0.329, d1 0.331, d2 0.327, d3 0.329, sum = 1.316081
    chain 2 domain 3: d0 0.334, d1 0.335, d2 0.332, d3 0.333, sum = 1.334635
    chain 2 domain 4: d0 0.335, d1 0.337, d2 0.337, d3 0.338, sum = 1.346558
    chain 2 domain 5: d0 0.309, d1 0.310, d2 0.309, d3 0.309, sum = 1.237183
    chain 2 domain 6: d0 0.335, d1 0.336, d2 0.334, d3 0.336, sum = 1.340576
    chain 2 domain 7: d0 0.320, d1 0.320, d2 0.323, d3 0.324, sum = 1.287272
    chain 2 domain 8: d0 0.334, d1 0.334, d2 0.334, d3 0.337, sum = 1.339559
    chain 2 domain 9: d0 0.317, d1 0.315, d2 0.318, d3 0.317, sum = 1.267008
    chain 2 domain 10: d0 0.329, d1 0.331, d2 0.331, d3 0.332, sum = 1.322754
    chain 2 domain 11: d0 0.329, d1 0.327, d2 0.326, d3 0.328, sum = 1.311320
    chain 2 domain 12: d0 0.327, d1 0.329, d2 0.330, d3 0.331, sum = 1.317017
    chain 2 domain 13: d0 0.343, d1 0.341, d2 0.341, d3 0.342, sum = 1.367676
    chain 2 domain 14: d0 0.325, d1 0.326, d2 0.328, d3 0.327, sum = 1.306519
    2021-03-09 22:09:06:driver-hash-chip.c:493:check_adc_voltage: PASS domainn volt check: request 0.800 (index 0, open_core)
    2021-03-09 22:09:07:temperature.c:272:calibrate_temp_sensor_one_chain: chain 1 temp sensor NCT218
    2021-03-09 22:09:08:temperature.c:272:calibrate_temp_sensor_one_chain: chain 2 temp sensor NCT218
    2021-03-09 22:09:14:driver-btm-api.c:311:check_bringup_temp: Bring up temperature is 25
    2021-03-09 22:09:14:uart.c:69:set_baud: set UART baud to 6000000
    2021-03-09 22:09:14 voltage[1] = 1850
    2021-03-09 22:09:14 voltage[2] = 1850
    2021-03-09 22:09:14:power_api.c:272:set_working_voltage_raw: working_voltage_raw = 1850
    2021-03-09 22:09:14:thread.c:1538:create_check_miner_status_thread: create thread
    2021-03-09 22:09:14:thread.c:1528:create_show_miner_status_thread: create thread
    2021-03-09 22:09:14:thread.c:1503:create_temperature_monitor_thread: create thread
    2021-03-09 22:09:14:thread.c:1580:create_fan_monitor_thread: create thread
    2021-03-09 22:09:14:frequency.c:578:inc_freq_with_fixed_vco: chain = 255, freq = 410, is_higher_voltage = true
    2021-03-09 22:09:20:frequency.c:623:inc_freq_with_fixed_vco: get pcb 26 ~ 32, chip_temp 30 ~ 39, now 6.0s, target 39.0
    2021-03-09 22:09:21:frequency.c:623:inc_freq_with_fixed_vco: get pcb 26 ~ 32, chip_temp 30 ~ 40, now 7.0s, target 39.2
    2021-03-09 22:09:21:frequency.c:644:inc_freq_with_fixed_vco: heat speed too fast! current_temp 40 > 39.2 target_temp.
    2021-03-09 22:09:27:frequency.c:623:inc_freq_with_fixed_vco: get pcb 27 ~ 33, chip_temp 31 ~ 41, now 13.0s, target 40.2
    2021-03-09 22:09:27:frequency.c:644:inc_freq_with_fixed_vco: heat speed too fast! current_temp 41 > 40.2 target_temp.
    2021-03-09 22:09:33:frequency.c:623:inc_freq_with_fixed_vco: get pcb 27 ~ 35, chip_temp 30 ~ 45, now 19.0s, target 41.2
    2021-03-09 22:09:33:frequency.c:644:inc_freq_with_fixed_vco: heat speed too fast! current_temp 45 > 41.2 target_temp.
    2021-03-09 22:09:39:frequency.c:623:inc_freq_with_fixed_vco: get pcb 27 ~ 37, chip_temp 30 ~ 46, now 25.0s, target 42.2
    2021-03-09 22:09:39:frequency.c:644:inc_freq_with_fixed_vco: heat speed too fast! current_temp 46 > 42.2 target_temp.
    2021-03-09 22:09:45:frequency.c:623:inc_freq_with_fixed_vco: get pcb 27 ~ 39, chip_temp 31 ~ 50, now 31.0s, target 43.2
    2021-03-09 22:09:45:frequency.c:644:inc_freq_with_fixed_vco: heat speed too fast! current_temp 50 > 43.2 target_temp.
    2021-03-09 22:09:51:frequency.c:623:inc_freq_with_fixed_vco: get pcb 28 ~ 40, chip_temp 31 ~ 53, now 37.0s, target 44.2
    2021-03-09 22:09:51:frequency.c:644:inc_freq_with_fixed_vco: heat speed too fast! current_temp 53 > 44.2 target_temp.
    2021-03-09 22:09:57:frequency.c:623:inc_freq_with_fixed_vco: get pcb 28 ~ 43, chip_temp 31 ~ 55, now 43.0s, target 45.2
    2021-03-09 22:09:57:frequency.c:644:inc_freq_with_fixed_vco: heat speed too fast! current_temp 55 > 45.2 target_temp.
    2021-03-09 22:10:03:frequency.c:623:inc_freq_with_fixed_vco: get pcb 28 ~ 45, chip_temp 31 ~ 58, now 49.0s, target 46.2
    2021-03-09 22:10:03:frequency.c:644:inc_freq_with_fixed_vco: heat speed too fast! current_temp 58 > 46.2 target_temp.
    2021-03-09 22:10:09:frequency.c:623:inc_freq_with_fixed_vco: get pcb 28 ~ 47, chip_temp 31 ~ 62, now 55.0s, target 47.2
    2021-03-09 22:10:09:frequency.c:644:inc_freq_with_fixed_vco: heat speed too fast! current_temp 62 > 47.2 target_temp.
    2021-03-09 22:10:15:frequency.c:623:inc_freq_with_fixed_vco: get pcb 28 ~ 49, chip_temp 31 ~ 65, now 61.0s, target 48.2
    2021-03-09 22:10:15:frequency.c:644:inc_freq_with_fixed_vco: heat speed too fast! current_temp 65 > 48.2 target_temp.
    2021-03-09 22:10:21:frequency.c:623:inc_freq_with_fixed_vco: get pcb 28 ~ 51, chip_temp 32 ~ 66, now 67.0s, target 49.2
    2021-03-09 22:10:21:frequency.c:644:inc_freq_with_fixed_vco: heat speed too fast! current_temp 66 > 49.2 target_temp.
    2021-03-09 22:10:27:frequency.c:623:inc_freq_with_fixed_vco: get pcb 29 ~ 53, chip_temp 32 ~ 69, now 73.0s, target 50.2
    2021-03-09 22:10:27:frequency.c:644:inc_freq_with_fixed_vco: heat speed too fast! current_temp 69 > 50.2 target_temp.
    2021-03-09 22:10:33:frequency.c:623:inc_freq_with_fixed_vco: get pcb 29 ~ 54, chip_temp 32 ~ 69, now 79.0s, target 51.2
    2021-03-09 22:10:33:frequency.c:644:inc_freq_with_fixed_vco: heat speed too fast! current_temp 69 > 51.2 target_temp.
    2021-03-09 22:10:39:frequency.c:623:inc_freq_with_fixed_vco: get pcb 30 ~ 54, chip_temp 33 ~ 67, now 85.0s, target 52.2
    2021-03-09 22:10:39:frequency.c:644:inc_freq_with_fixed_vco: heat speed too fast! current_temp 67 > 52.2 target_temp.
    2021-03-09 22:10:45:frequency.c:623:inc_freq_with_fixed_vco: get pcb 31 ~ 53, chip_temp 35 ~ 67, now 91.0s, target 53.2
    2021-03-09 22:10:45:frequency.c:644:inc_freq_with_fixed_vco: heat speed too fast! current_temp 67 > 53.2 target_temp.
    2021-03-09 22:10:51:frequency.c:623:inc_freq_with_fixed_vco: get pcb 33 ~ 54, chip_temp 35 ~ 66, now 97.0s, target 54.2
    2021-03-09 22:10:51:frequency.c:644:inc_freq_with_fixed_vco: heat speed too fast! current_temp 66 > 54.2 target_temp.
    2021-03-09 22:10:57:frequency.c:623:inc_freq_with_fixed_vco: get pcb 33 ~ 52, chip_temp 35 ~ 66, now 103.0s, target 55.2
    2021-03-09 22:10:57:frequency.c:644:inc_freq_with_fixed_vco: heat speed too fast! current_temp 66 > 55.2 target_temp.
    2021-03-09 22:11:03:frequency.c:623:inc_freq_with_fixed_vco: get pcb 33 ~ 52, chip_temp 36 ~ 65, now 109.0s, target 56.2
    2021-03-09 22:11:03:frequency.c:644:inc_freq_with_fixed_vco: heat speed too fast! current_temp 65 > 56.2 target_temp.
    2021-03-09 22:11:09:frequency.c:623:inc_freq_with_fixed_vco: get pcb 34 ~ 52, chip_temp 37 ~ 64, now 115.0s, target 57.2
    2021-03-09 22:11:09:frequency.c:644:inc_freq_with_fixed_vco: heat speed too fast! current_temp 64 > 57.2 target_temp.
    2021-03-09 22:11:15:frequency.c:623:inc_freq_with_fixed_vco: get pcb 35 ~ 51, chip_temp 38 ~ 64, now 121.0s, target 58.2
    2021-03-09 22:11:15:frequency.c:644:inc_freq_with_fixed_vco: heat speed too fast! current_temp 64 > 58.2 target_temp.
    2021-03-09 22:11:21:frequency.c:623:inc_freq_with_fixed_vco: get pcb 36 ~ 52, chip_temp 38 ~ 64, now 127.0s, target 59.2
    2021-03-09 22:11:21:frequency.c:644:inc_freq_with_fixed_vco: heat speed too fast! current_temp 64 > 59.2 target_temp.
    2021-03-09 22:11:27:frequency.c:623:inc_freq_with_fixed_vco: get pcb 36 ~ 51, chip_temp 38 ~ 65, now 133.1s, target 60.2
    2021-03-09 22:11:27:frequency.c:644:inc_freq_with_fixed_vco: heat speed too fast! current_temp 65 > 60.2 target_temp.
    2021-03-09 22:11:33:frequency.c:623:inc_freq_with_fixed_vco: get pcb 36 ~ 51, chip_temp 39 ~ 66, now 139.1s, target 61.2
    2021-03-09 22:11:33:frequency.c:644:inc_freq_with_fixed_vco: heat speed too fast! current_temp 66 > 61.2 target_temp.
    2021-03-09 22:11:39:frequency.c:623:inc_freq_with_fixed_vco: get pcb 37 ~ 52, chip_temp 39 ~ 65, now 145.1s, target 62.2
    2021-03-09 22:11:39:frequency.c:644:inc_freq_with_fixed_vco: heat speed too fast! current_temp 65 > 62.2 target_temp.
    2021-03-09 22:11:45:frequency.c:623:inc_freq_with_fixed_vco: get pcb 37 ~ 53, chip_temp 39 ~ 64, now 151.1s, target 63.2
    2021-03-09 22:11:45:frequency.c:644:inc_freq_with_fixed_vco: heat speed too fast! current_temp 64 > 63.2 target_temp.
    2021-03-09 22:11:51:frequency.c:623:inc_freq_with_fixed_vco: get pcb 38 ~ 53, chip_temp 41 ~ 66, now 157.1s, target 64.2
    2021-03-09 22:11:51:frequency.c:644:inc_freq_with_fixed_vco: heat speed too fast! current_temp 66 > 64.2 target_temp.
    2021-03-09 22:11:57:frequency.c:623:inc_freq_with_fixed_vco: get pcb 37 ~ 53, chip_temp 41 ~ 65, now 163.1s, target 65.2
    2021-03-09 22:11:58:frequency.c:623:inc_freq_with_fixed_vco: get pcb 38 ~ 52, chip_temp 41 ~ 65, now 164.1s, target 65.3
    2021-03-09 22:11:59:frequency.c:623:inc_freq_with_fixed_vco: get pcb 38 ~ 53, chip_temp 40 ~ 65, now 165.1s, target 65.5
    2021-03-09 22:12:00:frequency.c:623:inc_freq_with_fixed_vco: get pcb 38 ~ 52, chip_temp 41 ~ 65, now 166.1s, target 65.7
    2021-03-09 22:12:01:frequency.c:623:inc_freq_with_fixed_vco: get pcb 37 ~ 53, chip_temp 41 ~ 65, now 167.1s, target 65.8
    2021-03-09 22:12:02:frequency.c:623:inc_freq_with_fixed_vco: get pcb 38 ~ 53, chip_temp 41 ~ 65, now 168.1s, target 66.0
    2021-03-09 22:12:03:frequency.c:623:inc_freq_with_fixed_vco: get pcb 38 ~ 53, chip_temp 41 ~ 65, now 169.1s, target 66.2
    2021-03-09 22:12:04:frequency.c:623:inc_freq_with_fixed_vco: get pcb 38 ~ 54, chip_temp 41 ~ 65, now 170.1s, target 66.3
    2021-03-09 22:12:05:frequency.c:623:inc_freq_with_fixed_vco: get pcb 38 ~ 54, chip_temp 41 ~ 65, now 171.1s, target 66.5
    2021-03-09 22:12:06:frequency.c:623:inc_freq_with_fixed_vco: get pcb 37 ~ 53, chip_temp 41 ~ 65, now 172.1s, target 66.7
    2021-03-09 22:12:07:frequency.c:623:inc_freq_with_fixed_vco: get pcb 38 ~ 53, chip_temp 41 ~ 65, now 173.1s, target 66.8
    2021-03-09 22:12:08:frequency.c:623:inc_freq_with_fixed_vco: get pcb 38 ~ 53, chip_temp 41 ~ 65, now 174.1s, target 67.0
    2021-03-09 22:12:08:frequency.c:657:inc_freq_with_fixed_vco: [0] _POSTDIV1 = 7, _POSTDIV2 = 7, USER_DIV = 1, freq = 41
    2021-03-09 22:12:14:frequency.c:623:inc_freq_with_fixed_vco: get pcb 39 ~ 54, chip_temp 42 ~ 65, now 180.1s, target 68.0
    2021-03-09 22:12:14:frequency.c:657:inc_freq_with_fixed_vco: [1] _POSTDIV1 = 7, _POSTDIV2 = 6, USER_DIV = 1, freq = 48
    2021-03-09 22:12:20:frequency.c:623:inc_freq_with_fixed_vco: get pcb 38 ~ 54, chip_temp 42 ~ 66, now 186.1s, target 69.0
    2021-03-09 22:12:20:frequency.c:657:inc_freq_with_fixed_vco: [2] _POSTDIV1 = 6, _POSTDIV2 = 6, USER_DIV = 1, freq = 56
    2021-03-09 22:12:20:frequency.c:665:inc_freq_with_fixed_vco: set to 56M, get pcb 38 ~ 54, chip_temp 42 ~ 66
    2021-03-09 22:12:20:power_api.c:376:set_to_voltage_by_steps: Set to voltage raw 2100, step by step.
    2021-03-09 22:12:35:frequency.c:671:inc_freq_with_fixed_vco: freq_mode 1=1 FREQ_MODE_USER, Conf.Check_Clock_Cnt=0
    2021-03-09 22:12:35:driver-btm-api.c:1941:check_clock_counter_domain_last_core: freq 56 clock_counter_limit 5, no check, skip.
    2021-03-09 22:12:43:frequency.c:623:inc_freq_with_fixed_vco: get pcb 38 ~ 54, chip_temp 44 ~ 67, now 209.0s, target 72.8
    2021-03-09 22:12:43:frequency.c:657:inc_freq_with_fixed_vco: [3] _POSTDIV1 = 7, _POSTDIV2 = 5, USER_DIV = 1, freq = 58
    2021-03-09 22:12:43:frequency.c:665:inc_freq_with_fixed_vco: set to 58M, get pcb 38 ~ 54, chip_temp 44 ~ 67
    2021-03-09 22:12:43:frequency.c:671:inc_freq_with_fixed_vco: freq_mode 1=1 FREQ_MODE_USER, Conf.Check_Clock_Cnt=0
    2021-03-09 22:12:43:driver-btm-api.c:1941:check_clock_counter_domain_last_core: freq 58 clock_counter_limit 6, no check, skip.
    2021-03-09 22:12:51:frequency.c:623:inc_freq_with_fixed_vco: get pcb 38 ~ 55, chip_temp 46 ~ 66, now 217.0s, target 71.2
    2021-03-09 22:12:51:frequency.c:657:inc_freq_with_fixed_vco: [4] _POSTDIV1 = 6, _POSTDIV2 = 5, USER_DIV = 1, freq = 68
    2021-03-09 22:12:51:frequency.c:665:inc_freq_with_fixed_vco: set to 68M, get pcb 38 ~ 55, chip_temp 46 ~ 66
    2021-03-09 22:12:51:frequency.c:671:inc_freq_with_fixed_vco: freq_mode 1=1 FREQ_MODE_USER, Conf.Check_Clock_Cnt=0
    2021-03-09 22:12:51:driver-btm-api.c:1941:check_clock_counter_domain_last_core: freq 68 clock_counter_limit 7, no check, skip.
    2021-03-09 22:12:59:frequency.c:623:inc_freq_with_fixed_vco: get pcb 37 ~ 57, chip_temp 46 ~ 67, now 225.0s, target 69.5
    2021-03-09 22:12:59:frequency.c:657:inc_freq_with_fixed_vco: [5] _POSTDIV1 = 7, _POSTDIV2 = 4, USER_DIV = 1, freq = 73
    2021-03-09 22:12:59:frequency.c:665:inc_freq_with_fixed_vco: set to 73M, get pcb 37 ~ 57, chip_temp 46 ~ 67
    2021-03-09 22:12:59:frequency.c:671:inc_freq_with_fixed_vco: freq_mode 1=1 FREQ_MODE_USER, Conf.Check_Clock_Cnt=0
    2021-03-09 22:12:59:driver-btm-api.c:1941:check_clock_counter_domain_last_core: freq 73 clock_counter_limit 8, no check, skip.
    2021-03-09 22:13:07:frequency.c:623:inc_freq_with_fixed_vco: get pcb 38 ~ 58, chip_temp 48 ~ 66, now 233.0s, target 70.8
    2021-03-09 22:13:07:frequency.c:657:inc_freq_with_fixed_vco: [6] _POSTDIV1 = 5, _POSTDIV2 = 5, USER_DIV = 1, freq = 82
    2021-03-09 22:13:07:frequency.c:665:inc_freq_with_fixed_vco: set to 82M, get pcb 38 ~ 58, chip_temp 48 ~ 66
    2021-03-09 22:13:07:frequency.c:671:inc_freq_with_fixed_vco: freq_mode 1=1 FREQ_MODE_USER, Conf.Check_Clock_Cnt=0
    2021-03-09 22:13:07:driver-btm-api.c:1941:check_clock_counter_domain_last_core: freq 82 clock_counter_limit 10, no check, skip.
    2021-03-09 22:13:15:frequency.c:623:inc_freq_with_fixed_vco: get pcb 38 ~ 59, chip_temp 49 ~ 67, now 241.0s, target 72.2
    2021-03-09 22:13:15:frequency.c:657:inc_freq_with_fixed_vco: [7] _POSTDIV1 = 6, _POSTDIV2 = 4, USER_DIV = 1, freq = 85
    2021-03-09 22:13:15:frequency.c:665:inc_freq_with_fixed_vco: set to 85M, get pcb 38 ~ 59, chip_temp 49 ~ 67
    2021-03-09 22:13:15:frequency.c:671:inc_freq_with_fixed_vco: freq_mode 1=1 FREQ_MODE_USER, Conf.Check_Clock_Cnt=0
    2021-03-09 22:13:15:driver-btm-api.c:1941:check_clock_counter_domain_last_core: freq 85 clock_counter_limit 10, no check, skip.
    2021-03-09 22:13:23:frequency.c:623:inc_freq_with_fixed_vco: get pcb 38 ~ 60, chip_temp 49 ~ 69, now 249.0s, target 70.5
    2021-03-09 22:13:24:frequency.c:623:inc_freq_with_fixed_vco: get pcb 39 ~ 60, chip_temp 50 ~ 69, now 250.0s, target 70.7
    2021-03-09 22:13:25:frequency.c:623:inc_freq_with_fixed_vco: get pcb 39 ~ 60, chip_temp 49 ~ 69, now 251.0s, target 70.8
    2021-03-09 22:13:26:frequency.c:623:inc_freq_with_fixed_vco: get pcb 38 ~ 60, chip_temp 50 ~ 70, now 252.0s, target 71.0
    2021-03-09 22:13:27:frequency.c:623:inc_freq_with_fixed_vco: get pcb 38 ~ 60, chip_temp 50 ~ 69, now 253.0s, target 71.2
    2021-03-09 22:13:27:frequency.c:657:inc_freq_with_fixed_vco: [8] _POSTDIV1 = 7, _POSTDIV2 = 3, USER_DIV = 1, freq = 97
    2021-03-09 22:13:27:frequency.c:665:inc_freq_with_fixed_vco: set to 97M, get pcb 38 ~ 60, chip_temp 50 ~ 69
    2021-03-09 22:13:27:frequency.c:671:inc_freq_with_fixed_vco: freq_mode 1=1 FREQ_MODE_USER, Conf.Check_Clock_Cnt=0
    2021-03-09 22:13:27:driver-btm-api.c:1941:check_clock_counter_domain_last_core: freq 97 clock_counter_limit 12, no check, skip.
    2021-03-09 22:13:35:frequency.c:623:inc_freq_with_fixed_vco: get pcb 38 ~ 62, chip_temp 51 ~ 72, now 261.1s, target 72.5
    2021-03-09 22:13:36:frequency.c:623:inc_freq_with_fixed_vco: get pcb 38 ~ 62, chip_temp 51 ~ 72, now 262.1s, target 72.7
    2021-03-09 22:13:37:frequency.c:623:inc_freq_with_fixed_vco: get pcb 38 ~ 62, chip_temp 51 ~ 72, now 263.1s, target 72.8
    2021-03-09 22:13:38:frequency.c:623:inc_freq_with_fixed_vco: get pcb 39 ~ 62, chip_temp 51 ~ 73, now 264.1s, target 73.0
    2021-03-09 22:13:39:frequency.c:623:inc_freq_with_fixed_vco: get pcb 39 ~ 63, chip_temp 52 ~ 72, now 265.1s, target 73.2
    2021-03-09 22:13:40:frequency.c:623:inc_freq_with_fixed_vco: get pcb 39 ~ 63, chip_temp 51 ~ 72, now 266.1s, target 73.3
    2021-03-09 22:13:41:frequency.c:623:inc_freq_with_fixed_vco: get pcb 39 ~ 62, chip_temp 51 ~ 73, now 267.1s, target 73.5
    2021-03-09 22:13:42:frequency.c:623:inc_freq_with_fixed_vco: get pcb 39 ~ 63, chip_temp 52 ~ 73, now 268.1s, target 73.7
    2021-03-09 22:13:43:frequency.c:623:inc_freq_with_fixed_vco: get pcb 39 ~ 63, chip_temp 52 ~ 73, now 269.1s, target 73.8
    2021-03-09 22:13:44:frequency.c:623:inc_freq_with_fixed_vco: get pcb 39 ~ 63, chip_temp 52 ~ 74, now 270.1s, target 74.0
    2021-03-09 22:13:45:frequency.c:623:inc_freq_with_fixed_vco: get pcb 39 ~ 63, chip_temp 52 ~ 74, now 271.1s, target 74.2
    2021-03-09 22:13:46:frequency.c:623:inc_freq_with_fixed_vco: get pcb 39 ~ 63, chip_temp 52 ~ 73, now 272.1s, target 74.3
    2021-03-09 22:13:47:frequency.c:623:inc_freq_with_fixed_vco: get pcb 39 ~ 64, chip_temp 51 ~ 74, now 273.1s, target 74.5
    2021-03-09 22:13:48:frequency.c:623:inc_freq_with_fixed_vco: get pcb 38 ~ 64, chip_temp 52 ~ 74, now 274.1s, target 74.7
    2021-03-09 22:13:49:frequency.c:623:inc_freq_with_fixed_vco: get pcb 39 ~ 64, chip_temp 52 ~ 74, now 275.1s, target 74.8
    2021-03-09 22:13:50:frequency.c:623:inc_freq_with_fixed_vco: get pcb 40 ~ 64, chip_temp 53 ~ 75, now 276.1s, target 75.0
    2021-03-09 22:13:51:frequency.c:623:inc_freq_with_fixed_vco: get pcb 40 ~ 63, chip_temp 52 ~ 75, now 277.1s, target 75.2
    2021-03-09 22:13:52:frequency.c:623:inc_freq_with_fixed_vco: get pcb 40 ~ 64, chip_temp 53 ~ 75, now 278.1s, target 75.3
    2021-03-09 22:13:53:frequency.c:623:inc_freq_with_fixed_vco: get pcb 39 ~ 65, chip_temp 52 ~ 75, now 279.1s, target 75.5
    2021-03-09 22:13:54:frequency.c:623:inc_freq_with_fixed_vco: get pcb 40 ~ 65, chip_temp 52 ~ 75, now 280.1s, target 75.7
    2021-03-09 22:13:55:frequency.c:623:inc_freq_with_fixed_vco: get pcb 40 ~ 65, chip_temp 52 ~ 76, now 281.1s, target 75.8
    2021-03-09 22:13:55:frequency.c:644:inc_freq_with_fixed_vco: heat speed too fast! current_temp 76 > 75.8 target_temp.
    2021-03-09 22:14:01:frequency.c:623:inc_freq_with_fixed_vco: get pcb 40 ~ 66, chip_temp 53 ~ 77, now 287.1s, target 76.8
    2021-03-09 22:14:01:frequency.c:644:inc_freq_with_fixed_vco: heat speed too fast! current_temp 77 > 76.8 target_temp.
    2021-03-09 22:14:07:frequency.c:623:inc_freq_with_fixed_vco: get pcb 40 ~ 67, chip_temp 54 ~ 78, now 293.1s, target 77.8
    2021-03-09 22:14:07:frequency.c:644:inc_freq_with_fixed_vco: heat speed too fast! current_temp 78 > 77.8 target_temp.
    2021-03-09 22:14:13:frequency.c:623:inc_freq_with_fixed_vco: get pcb 41 ~ 68, chip_temp 54 ~ 79, now 299.1s, target 78.8
    2021-03-09 22:14:13:frequency.c:644:inc_freq_with_fixed_vco: heat speed too fast! current_temp 79 > 78.8 target_temp.
    2021-03-09 22:14:19:frequency.c:623:inc_freq_with_fixed_vco: get pcb 40 ~ 69, chip_temp 55 ~ 80, now 305.1s, target 79.8
    2021-03-09 22:14:19:frequency.c:644:inc_freq_with_fixed_vco: heat speed too fast! current_temp 80 > 79.8 target_temp.
    2021-03-09 22:14:25:frequency.c:623:inc_freq_with_fixed_vco: get pcb 41 ~ 70, chip_temp 55 ~ 81, now 311.1s, target 80.8
    2021-03-09 22:14:25:frequency.c:644:inc_freq_with_fixed_vco: heat speed too fast! current_temp 81 > 80.8 target_temp.
    2021-03-09 22:14:31:frequency.c:623:inc_freq_with_fixed_vco: get pcb 41 ~ 71, chip_temp 56 ~ 82, now 317.1s, target 81.8
    2021-03-09 22:14:31:frequency.c:644:inc_freq_with_fixed_vco: heat speed too fast! current_temp 82 > 81.8 target_temp.
    2021-03-09 22:14:37:frequency.c:623:inc_freq_with_fixed_vco: get pcb 42 ~ 72, chip_temp 56 ~ 84, now 323.1s, target 82.8
    2021-03-09 22:14:37:frequency.c:644:inc_freq_with_fixed_vco: heat speed too fast! current_temp 84 > 82.8 target_temp.
    2021-03-09 22:14:43:frequency.c:623:inc_freq_with_fixed_vco: get pcb 42 ~ 72, chip_temp 58 ~ 85, now 329.1s, target 83.8
    2021-03-09 22:14:43:frequency.c:644:inc_freq_with_fixed_vco: heat speed too fast! current_temp 85 > 83.8 target_temp.
    2021-03-09 22:14:49:frequency.c:623:inc_freq_with_fixed_vco: get pcb 42 ~ 73, chip_temp 58 ~ 86, now 335.1s, target 84.8
    2021-03-09 22:14:49:frequency.c:644:inc_freq_with_fixed_vco: heat speed too fast! current_temp 86 > 84.8 target_temp.
    2021-03-09 22:14:55:frequency.c:623:inc_freq_with_fixed_vco: get pcb 43 ~ 75, chip_temp 59 ~ 88, now 341.1s, target 85.8
    2021-03-09 22:14:55:frequency.c:644:inc_freq_with_fixed_vco: heat speed too fast! current_temp 88 > 85.8 target_temp.
    2021-03-09 22:15:01:frequency.c:623:inc_freq_with_fixed_vco: get pcb 43 ~ 76, chip_temp 59 ~ 89, now 347.1s, target 86.8
    2021-03-09 22:15:01:frequency.c:644:inc_freq_with_fixed_vco: heat speed too fast! current_temp 89 > 86.8 target_temp.
    2021-03-09 22:15:07:frequency.c:623:inc_freq_with_fixed_vco: get pcb 43 ~ 78, chip_temp 60 ~ 91, now 353.1s, target 87.8
    2021-03-09 22:15:07:frequency.c:644:inc_freq_with_fixed_vco: heat speed too fast! current_temp 91 > 87.8 target_temp.
    2021-03-09 22:15:13:frequency.c:623:inc_freq_with_fixed_vco: get pcb 43 ~ 79, chip_temp 60 ~ 92, now 359.1s, target 88.9
    2021-03-09 22:15:13:frequency.c:644:inc_freq_with_fixed_vco: heat speed too fast! current_temp 92 > 88.9 target_temp.
    2021-03-09 22:15:19:frequency.c:623:inc_freq_with_fixed_vco: get pcb 43 ~ 80, chip_temp 61 ~ 93, now 365.1s, target 89.9
    2021-03-09 22:15:19:frequency.c:644:inc_freq_with_fixed_vco: heat speed too fast! current_temp 93 > 89.9 target_temp.
    2021-03-09 22:15:24:thread.c:849:check_temperature: over max temp, pcb temp 81 (max 80), chip temp 95(max 98)
    2021-03-09 22:15:24:driver-btm-api.c:247:set_miner_status: ERROR_TEMP_TOO_HIGH
    2021-03-09 22:15:24:driver-btm-api.c:176:stop_mining: stop mining: over max temp
    2021-03-09 22:15:24:thread.c:1575:cancel_temperature_monitor_thread: cancel thread
    2021-03-09 22:15:24:thread.c:1595:cancel_read_nonce_reg_thread: cancel thread
    2021-03-09 22:15:24:thread.c:1631:cancel_bitmain_soc_init_thread: cancel thread
    2021-03-09 22:15:24:driver-btm-api.c:147:killall_hashboard: ****power off hashboard****

    0
    Comment actions Permalink

    Hello!
    The log shows high temperature, you can try to check and clean up the arithmetic board dust, try to change the power supply, or you can try to use the SD card to restore the factory. If there are still any problems, it is recommended to repair and deal with them.

    0
    Comment actions Permalink

    Hi

     

    The "arithmetic board" is that the controller card?

    I have cleaned the whole machine from dust.

     

    3 pcs heat sinks have come lose from chain 0 board so i have disconnected the board.

    It's to expensive to ship to China from Sweden which card is the most likely to be broken.

    I know that you have no chance to be sure, but if you would make a guess.

    A new controller board is the cheapest part, is that a good part to start change out?

     

    I'd tried to run the miner outside in -5 degree celsius with board 2 and 3 in.

     

    Power consumption rised during to ~2700w @ 20.8v before shutdown do to high temperature :

    2021-03-10 10:05:37:frequency.c:644:inc_freq_with_fixed_vco: heat speed too fast! current_temp 95 > 83.9 target_temp.
    2021-03-10 10:05:43:thread.c:849:check_temperature: over max temp, pcb temp 80 (max 80), chip temp 99(max 98)

     

    Booting Linux on physical CPU 0x0
    Linux version 4.6.0-xilinx-gff8137b-dirty (lzq@armdev2) (gcc version 4.8.3 20140320 (prerelease) (Sourcery CodeBench Lite 2014.05-23) ) #25 SMP PREEMPT Fri Nov 23 15:30:52 CST 2018
    CPU: ARMv7 Processor [413fc090] revision 0 (ARMv7), cr=18c5387d
    CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
    Machine model: Xilinx Zynq
    cma: Reserved 16 MiB at 0x0e000000
    Memory policy: Data cache writealloc
    On node 0 totalpages: 61440
    free_area_init_node: node 0, pgdat c0b39280, node_mem_map cde10000
    Normal zone: 480 pages used for memmap
    Normal zone: 0 pages reserved
    Normal zone: 61440 pages, LIFO batch:15
    percpu: Embedded 12 pages/cpu @cddf1000 s19776 r8192 d21184 u49152
    pcpu-alloc: s19776 r8192 d21184 u49152 alloc=12*4096
    pcpu-alloc: [0] 0 [0] 1
    Built 1 zonelists in Zone order, mobility grouping on. Total pages: 60960
    Kernel command line: mem=240M console=ttyPS0,115200 ramdisk_size=33554432 root=/dev/ram rw earlyprintk
    PID hash table entries: 1024 (order: 0, 4096 bytes)
    Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
    Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
    Memory: 195688K/245760K available (6345K kernel code, 231K rwdata, 1896K rodata, 1024K init, 223K bss, 33688K reserved, 16384K cma-reserved, 0K highmem)
    Virtual kernel memory layout:
    vector : 0xffff0000 - 0xffff1000 ( 4 kB)
    fixmap : 0xffc00000 - 0xfff00000 (3072 kB)
    vmalloc : 0xcf800000 - 0xff800000 ( 768 MB)
    lowmem : 0xc0000000 - 0xcf000000 ( 240 MB)
    pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
    modules : 0xbf000000 - 0xbfe00000 ( 14 MB)
    .text : 0xc0008000 - 0xc090c424 (9234 kB)
    .init : 0xc0a00000 - 0xc0b00000 (1024 kB)
    .data : 0xc0b00000 - 0xc0b39fe0 ( 232 kB)
    .bss : 0xc0b39fe0 - 0xc0b71c28 ( 224 kB)
    Preemptible hierarchical RCU implementation.
    Build-time adjustment of leaf fanout to 32.
    RCU restricting CPUs from NR_CPUS=4 to nr_cpu_ids=2.
    RCU: Adjusting geometry for rcu_fanout_leaf=32, nr_cpu_ids=2
    NR_IRQS:16 nr_irqs:16 16
    efuse mapped to cf800000
    ps7-slcr mapped to cf802000
    L2C: platform modifies aux control register: 0x72360000 -> 0x72760000
    L2C: DT/platform modifies aux control register: 0x72360000 -> 0x72760000
    L2C-310 erratum 769419 enabled
    L2C-310 enabling early BRESP for Cortex-A9
    L2C-310 full line of zeros enabled for Cortex-A9
    L2C-310 ID prefetch enabled, offset 1 lines
    L2C-310 dynamic clock gating enabled, standby mode enabled
    L2C-310 cache controller enabled, 8 ways, 512 kB
    L2C-310: CACHE_ID 0x410000c8, AUX_CTRL 0x76760001
    zynq_clock_init: clkc starts at cf802100
    Zynq clock init
    sched_clock: 64 bits at 333MHz, resolution 3ns, wraps every 4398046511103ns
    clocksource: arm_global_timer: mask: 0xffffffffffffffff max_cycles: 0x4ce07af025, max_idle_ns: 440795209040 ns
    Switching to timer-based delay loop, resolution 3ns
    clocksource: ttc_clocksource: mask: 0xffff max_cycles: 0xffff, max_idle_ns: 537538477 ns
    ps7-ttc #0 at cf80a000, irq=18
    Console: colour dummy device 80x30
    Calibrating delay loop (skipped), value calculated using timer frequency.. 666.66 BogoMIPS (lpj=3333333)
    pid_max: default: 32768 minimum: 301
    Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
    Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
    CPU: Testing write buffer coherency: ok
    CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
    Setting up static identity map for 0x100000 - 0x100058
    CPU1: failed to boot: -1
    Brought up 1 CPUs
    SMP: Total of 1 processors activated (666.66 BogoMIPS).
    CPU: All CPU(s) started in SVC mode.
    devtmpfs: initialized
    VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 4
    clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
    pinctrl core: initialized pinctrl subsystem
    NET: Registered protocol family 16
    DMA: preallocated 256 KiB pool for atomic coherent allocations
    cpuidle: using governor menu
    hw-breakpoint: found 5 (+1 reserved) breakpoint and 1 watchpoint registers.
    hw-breakpoint: maximum watchpoint size is 4 bytes.
    zynq-ocm f800c000.ps7-ocmc: ZYNQ OCM pool: 256 KiB @ 0xcf880000
    vgaarb: loaded
    SCSI subsystem initialized
    usbcore: registered new interface driver usbfs
    usbcore: registered new interface driver hub
    usbcore: registered new device driver usb
    media: Linux media interface: v0.10
    Linux video capture interface: v2.00
    pps_core: LinuxPPS API ver. 1 registered
    pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
    PTP clock support registered
    EDAC MC: Ver: 3.0.0
    Advanced Linux Sound Architecture Driver Initialized.
    clocksource: Switched to clocksource arm_global_timer
    NET: Registered protocol family 2
    TCP established hash table entries: 2048 (order: 1, 8192 bytes)
    TCP bind hash table entries: 2048 (order: 2, 16384 bytes)
    TCP: Hash tables configured (established 2048 bind 2048)
    UDP hash table entries: 256 (order: 1, 8192 bytes)
    UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
    NET: Registered protocol family 1
    RPC: Registered named UNIX socket transport module.
    RPC: Registered udp transport module.
    RPC: Registered tcp transport module.
    RPC: Registered tcp NFSv4.1 backchannel transport module.
    PCI: CLS 0 bytes, default 64
    Trying to unpack rootfs image as initramfs...
    rootfs image is not initramfs (no cpio magic); looks like an initrd
    Freeing initrd memory: 20648K (cc6d7000 - cdb01000)
    hw perfevents: enabled with armv7_cortex_a9 PMU driver, 7 counters available
    futex hash table entries: 512 (order: 3, 32768 bytes)
    workingset: timestamp_bits=28 max_order=16 bucket_order=0
    jffs2: version 2.2. (NAND) (SUMMARY) © 2001-2006 Red Hat, Inc.
    io scheduler noop registered
    io scheduler deadline registered
    io scheduler cfq registered (default)
    dma-pl330 f8003000.ps7-dma: Loaded driver for PL330 DMAC-241330
    dma-pl330 f8003000.ps7-dma: DBUFF-128x8bytes Num_Chans-8 Num_Peri-4 Num_Events-16
    e0000000.serial: ttyPS0 at MMIO 0xe0000000 (irq = 158, base_baud = 6249999) is a xuartps
    console [ttyPS0] enabled
    xdevcfg f8007000.ps7-dev-cfg: ioremap 0xf8007000 to cf86e000
    [drm] Initialized drm 1.1.0 20060810
    brd: module loaded
    loop: module loaded
    CAN device driver interface
    gpiod_set_value: invalid GPIO
    libphy: MACB_mii_bus: probed
    macb e000b000.ethernet eth0: Cadence GEM rev 0x00020118 at 0xe000b000 irq 31 (00:0a:35:00:00:00)
    Generic PHY e000b000.etherne:00: attached PHY driver [Generic PHY] (mii_bus:phy_addr=e000b000.etherne:00, irq=-1)
    e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k
    e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
    ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
    ehci-pci: EHCI PCI platform driver
    usbcore: registered new interface driver usb-storage
    mousedev: PS/2 mouse device common for all mice
    i2c /dev entries driver
    Xilinx Zynq CpuIdle Driver started
    sdhci: Secure Digital Host Controller Interface driver
    sdhci: Copyright(c) Pierre Ossman
    sdhci-pltfm: SDHCI platform and OF driver helper
    mmc0: SDHCI controller on e0100000.ps7-sdio [e0100000.ps7-sdio] using ADMA
    ledtrig-cpu: registered to indicate activity on CPUs
    usbcore: registered new interface driver usbhid
    usbhid: USB HID core driver
    nand: device found, Manufacturer ID: 0x2c, Chip ID: 0xda
    nand: Micron MT29F2G08ABAGAWP
    nand: 256 MiB, SLC, erase size: 128 KiB, page size: 2048, OOB size: 128
    nand: WARNING: pl35x-nand: the ECC used on your system is too weak compared to the one required by the NAND chip
    Bad block table found at page 131008, version 0x01
    Bad block table found at page 130944, version 0x01
    6 ofpart partitions found on MTD device pl35x-nand
    Creating 6 MTD partitions on "pl35x-nand":
    0x000000000000-0x000002800000 : "BOOT.bin-env-dts-kernel"
    0x000002800000-0x000004800000 : "ramfs"
    0x000004800000-0x000005000000 : "configs"
    0x000005000000-0x000006000000 : "reserve"
    0x000006000000-0x000008000000 : "ramfs-bak"
    0x000008000000-0x000010000000 : "reserve1"
    NET: Registered protocol family 10
    sit: IPv6 over IPv4 tunneling driver
    NET: Registered protocol family 17
    can: controller area network core (rev 20120528 abi 9)
    NET: Registered protocol family 29
    can: raw protocol (rev 20120528)
    can: broadcast manager protocol (rev 20120528 t)
    can: netlink gateway (rev 20130117) max_hops=1
    zynq_pm_ioremap: no compatible node found for 'xlnx,zynq-ddrc-a05'
    zynq_pm_late_init: Unable to map DDRC IO memory.
    Registering SWP/SWPB emulation handler
    hctosys: unable to open rtc device (rtc0)
    ALSA device list:
    No soundcards found.
    RAMDISK: gzip image found at block 0
    EXT4-fs (ram0): couldn't mount as ext3 due to feature incompatibilities
    EXT4-fs (ram0): mounted filesystem without journal. Opts: (null)
    VFS: Mounted root (ext4 filesystem) on device 1:0.
    devtmpfs: mounted
    Freeing unused kernel memory: 1024K (c0a00000 - c0b00000)
    EXT4-fs (ram0): re-mounted. Opts: block_validity,delalloc,barrier,user_xattr
    random: dd urandom read with 0 bits of entropy available
    ubi0: attaching mtd2
    ubi0: scanning is finished
    ubi0: attached mtd2 (name "configs", size 8 MiB)
    ubi0: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes
    ubi0: min./max. I/O unit sizes: 2048/2048, sub-page size 2048
    ubi0: VID header offset: 2048 (aligned 2048), data offset: 4096
    ubi0: good PEBs: 64, bad PEBs: 0, corrupted PEBs: 0
    ubi0: user volume: 1, internal volumes: 1, max. volumes count: 128
    ubi0: max/mean erase counter: 39/17, WL threshold: 4096, image sequence number: 2636279313
    ubi0: available PEBs: 0, total reserved PEBs: 64, PEBs reserved for bad PEB handling: 40
    ubi0: background thread "ubi_bgt0d" started, PID 708
    UBIFS (ubi0:0): background thread "ubifs_bgt0_0" started, PID 711
    UBIFS (ubi0:0): recovery needed
    UBIFS (ubi0:0): recovery completed
    UBIFS (ubi0:0): UBIFS: mounted UBI device 0, volume 0, name "configs"
    UBIFS (ubi0:0): LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
    UBIFS (ubi0:0): FS size: 1396736 bytes (1 MiB, 11 LEBs), journal size 888833 bytes (0 MiB, 5 LEBs)
    UBIFS (ubi0:0): reserved for root: 65970 bytes (64 KiB)
    UBIFS (ubi0:0): media format: w4/r0 (latest is w4/r0), UUID A5E2E817-94FA-4998-90AB-D2C873A8EBA9, small LPT model
    ubi1: attaching mtd5
    ubi1: scanning is finished
    ubi1: attached mtd5 (name "reserve1", size 128 MiB)
    ubi1: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes
    ubi1: min./max. I/O unit sizes: 2048/2048, sub-page size 2048
    ubi1: VID header offset: 2048 (aligned 2048), data offset: 4096
    ubi1: good PEBs: 1020, bad PEBs: 4, corrupted PEBs: 0
    ubi1: user volume: 1, internal volumes: 1, max. volumes count: 128
    ubi1: max/mean erase counter: 458/166, WL threshold: 4096, image sequence number: 614900815
    ubi1: available PEBs: 0, total reserved PEBs: 1020, PEBs reserved for bad PEB handling: 36
    ubi1: background thread "ubi_bgt1d" started, PID 720
    UBIFS (ubi1:0): background thread "ubifs_bgt1_0" started, PID 723
    UBIFS (ubi1:0): recovery needed
    UBIFS (ubi1:0): recovery completed
    UBIFS (ubi1:0): UBIFS: mounted UBI device 1, volume 0, name "reserve1"
    UBIFS (ubi1:0): LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
    UBIFS (ubi1:0): FS size: 123039744 bytes (117 MiB, 969 LEBs), journal size 6221824 bytes (5 MiB, 49 LEBs)
    UBIFS (ubi1:0): reserved for root: 4952683 bytes (4836 KiB)
    UBIFS (ubi1:0): media format: w4/r0 (latest is w4/r0), UUID 91DF6B3D-1A99-4241-87C7-EB25097110C1, small LPT model
    IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
    IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
    macb e000b000.ethernet eth0: unable to generate target frequency: 25000000 Hz
    macb e000b000.ethernet eth0: link up (100/Full)
    IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
    In axi fpga driver!
    request_mem_region OK!
    AXI fpga dev virtual address is 0xcfb54000
    *base_vir_addr = 0xb023
    In fpga mem driver!
    request_mem_region OK!
    fpga mem virtual address is 0xd2000000
    random: nonblocking pool is initialized
    2021-03-10 09:27:07:thread.c:1555:create_bitmain_soc_init_thread: create thread
    2021-03-10 09:27:07:driver-btm-api.c:682:init_freq_mode: This is scan-user version
    2021-03-10 09:27:07:driver-btm-api.c:2518:bitmain_soc_init: Miner compile time: Fri Jan 8 22:31:06 CST 2021 type: Antminer S17e
    2021-03-10 09:27:07:driver-btm-api.c:2519:bitmain_soc_init: commit version: 37668c9 2021-01-08 18:20:11, build by: jenkins 2021-01-08 22:35:52
    2021-03-10 09:27:07:driver-btm-api.c:2520:bitmain_soc_init: opt_multi_version = 1
    2021-03-10 09:27:07:driver-btm-api.c:2521:bitmain_soc_init: opt_bitmain_ab = 1
    2021-03-10 09:27:07:driver-btm-api.c:2522:bitmain_soc_init: mid_auto_gen = 0
    2021-03-10 09:27:07:driver-btm-api.c:2523:bitmain_soc_init: work_mode = 0
    2021-03-10 09:27:07:driver-btm-api.c:2524:bitmain_soc_init: power_feedback_en = true
    2021-03-10 09:27:07:driver-btm-api.c:2067:show_sn: no SN got, please write SN to /config/sn
    2021-03-10 09:27:07:driver-btm-api.c:1384:miner_device_init: Detect 256MB control board of XILINX
    2021-03-10 09:27:07:driver-btm-api.c:1325:init_fan_parameter: fan_eft : 0 fan_pwm : 0
    2021-03-10 09:27:13:driver-btm-api.c:1309:init_miner_version: miner ID : 81322c481540885c
    2021-03-10 09:27:13:driver-btm-api.c:1315:init_miner_version: FPGA Version = 0xB023
    2021-03-10 09:27:16:auto_adapt.c:100:_get_board_info: chain[1] board bin: 1, chip bin: 1, chip ft: A4V4, chip version: AB
    2021-03-10 09:27:16:auto_adapt.c:100:_get_board_info: chain[2] board bin: 1, chip bin: 1, chip ft: A4V4, chip version: AB
    2021-03-10 09:27:16:driver-btm-api.c:2164:get_calibration_voltage: calibration voltage flag is error data.
    2021-03-10 09:27:16 voltage[1] = 1850
    2021-03-10 09:27:16 voltage[2] = 1850
    2021-03-10 09:27:16:auto_adapt.c:273:is_sweep_failed_before: open sweep tag failed
    voltage_ref = 1850
    2100 2100 2100 2100 2100 2100
    2100 2100 2100 2100 2100 2100
    2100 2100 2100 2100 2090 2050
    2100 2090 2080 2060 2030 1960
    2080 2060 2030 2010 1960 1910

    2021-03-10 09:27:16:thread.c:1523:create_read_nonce_reg_thread: create thread
    2021-03-10 09:27:16:driver-btm-api.c:698:dump_pcb_bom_version: Chain [1] PCB Version: 0x0128
    2021-03-10 09:27:16:driver-btm-api.c:699:dump_pcb_bom_version: Chain [1] BOM Version: 0x0100
    2021-03-10 09:27:16:driver-btm-api.c:698:dump_pcb_bom_version: Chain [2] PCB Version: 0x0128
    2021-03-10 09:27:16:driver-btm-api.c:699:dump_pcb_bom_version: Chain [2] BOM Version: 0x0100
    2021-03-10 09:27:23:driver-btm-api.c:2344:bitmain_board_init: Fan check passed.
    2021-03-10 09:27:24:board.c:81:jump_and_app_check_restore_pic: chain[1] PIC jump to app
    2021-03-10 09:27:26:board.c:94:jump_and_app_check_restore_pic: Check chain[1] PIC fw version=0xb9
    2021-03-10 09:27:27:board.c:81:jump_and_app_check_restore_pic: chain[2] PIC jump to app
    2021-03-10 09:27:29:board.c:94:jump_and_app_check_restore_pic: Check chain[2] PIC fw version=0xb9
    2021-03-10 09:27:29:thread.c:1518:create_pic_heart_beat_thread: create thread
    2021-03-10 09:27:31:power_api.c:241:power_init: power type version: 0x0042
    2021-03-10 09:27:32:power_api.c:259:power_init: Power init:
    2021-03-10 09:27:32:power_api.c:260:power_init: current_voltage_raw = 2136
    2021-03-10 09:27:32:power_api.c:261:power_init: highest_voltage_raw = 2000
    2021-03-10 09:27:32:power_api.c:262:power_init: working_voltage_raw = 1800
    2021-03-10 09:27:32:power_api.c:263:power_init: higher_voltage_raw = 1850
    2021-03-10 09:27:32:power_api.c:264:power_init: check_asic_voltage_raw = 1800
    2021-03-10 09:27:32:driver-btm-api.c:2354:bitmain_board_init: Enter 60s sleep to make sure power release finish.
    2021-03-10 09:28:34:driver-btm-api.c:1123:check_asic_number_until_volt_balance: THIS is No.1 time boost asic:
    2021-03-10 09:28:34:power_api.c:334:modify_check_asic_voltage: check_asic_voltage_raw = 1800
    2021-03-10 09:28:37:power_api.c:298:set_to_check_asic_voltage_by_steps: Set to voltage raw 1800, step by step.
    2021-03-10 09:29:01:uart.c:69:set_baud: set UART baud to 115200
    chain 1, IO_DRIVE_STRENGTH_CONFIGURATION reg = 0x 7777777
    2021-03-10 09:29:06:driver-btm-api.c:1035:check_asic_number_with_power_on: Chain[1]: find 135 asic, times 0
    chain 2, IO_DRIVE_STRENGTH_CONFIGURATION reg = 0x 7777777
    2021-03-10 09:29:10:driver-btm-api.c:1035:check_asic_number_with_power_on: Chain[2]: find 135 asic, times 0
    2021-03-10 09:29:10:driver-btm-api.c:1163:check_asic_number_until_volt_balance: PASS: volt balance at No.1 time boost asic.
    2021-03-10 09:29:10:power_api.c:364:set_to_highest_voltage_by_steps: Set to voltage raw 2000, step by step.
    2021-03-10 09:29:45:driver-hash-chip.c:876:set_uart_relay: set uart relay to 0x390003
    2021-03-10 09:29:45:driver-hash-chip.c:1264:set_ldo_ctrl: Set LDO to 0x2000203
    2021-03-10 09:29:46:driver-hash-chip.c:737:dump_adc_voltage_v2: get ADC_DATAOUT from chain 1 with 0 regs timeout.
    chain 1 domain 0: d0 0.340, d1 0.342, d2 0.341, d3 0.343, sum = 1.366414
    chain 1 domain 1: d0 0.333, d1 0.330, d2 0.330, d3 0.334, sum = 1.326253
    chain 1 domain 2: d0 0.316, d1 0.315, d2 0.314, d3 0.314, sum = 1.258748
    chain 1 domain 3: d0 0.313, d1 0.309, d2 0.311, d3 0.311, sum = 1.243612
    chain 1 domain 4: d0 0.312, d1 0.311, d2 0.310, d3 0.314, sum = 1.247152
    chain 1 domain 5: d0 0.332, d1 0.328, d2 0.327, d3 0.331, sum = 1.317464
    chain 1 domain 6: d0 0.329, d1 0.328, d2 0.326, d3 0.328, sum = 1.309937
    chain 1 domain 7: d0 0.330, d1 0.325, d2 0.326, d3 0.330, sum = 1.311320
    chain 1 domain 8: d0 0.333, d1 0.334, d2 0.330, d3 0.332, sum = 1.329142
    chain 1 domain 9: d0 0.345, d1 0.342, d2 0.340, d3 0.341, sum = 1.369425
    chain 1 domain 10: d0 0.330, d1 0.332, d2 0.327, d3 0.328, sum = 1.316650
    chain 1 domain 11: d0 0.340, d1 0.339, d2 0.337, d3 0.342, sum = 1.357992
    chain 1 domain 12: d0 0.326, d1 0.325, d2 0.324, d3 0.327, sum = 1.302124
    chain 1 domain 13: d0 0.345, d1 0.344, d2 0.345, d3 0.345, sum = 1.378703
    chain 1 domain 14: d0 0.347, d1 0.347, d2 0.347, d3 0.347, sum = 1.388835
    2021-03-10 09:29:46:driver-hash-chip.c:737:dump_adc_voltage_v2: get ADC_DATAOUT from chain 2 with 0 regs timeout.
    chain 2 domain 0: d0 0.345, d1 0.348, d2 0.346, d3 0.345, sum = 1.383586
    chain 2 domain 1: d0 0.333, d1 0.335, d2 0.333, d3 0.332, sum = 1.333130
    chain 2 domain 2: d0 0.324, d1 0.325, d2 0.323, d3 0.323, sum = 1.294922
    chain 2 domain 3: d0 0.320, d1 0.320, d2 0.319, d3 0.317, sum = 1.276123
    chain 2 domain 4: d0 0.318, d1 0.320, d2 0.321, d3 0.320, sum = 1.278646
    chain 2 domain 5: d0 0.303, d1 0.305, d2 0.304, d3 0.303, sum = 1.215454
    chain 2 domain 6: d0 0.329, d1 0.332, d2 0.330, d3 0.330, sum = 1.320597
    chain 2 domain 7: d0 0.328, d1 0.328, d2 0.328, d3 0.329, sum = 1.313558
    chain 2 domain 8: d0 0.340, d1 0.341, d2 0.339, d3 0.341, sum = 1.361084
    chain 2 domain 9: d0 0.328, d1 0.328, d2 0.328, d3 0.327, sum = 1.310140
    chain 2 domain 10: d0 0.333, d1 0.335, d2 0.334, d3 0.335, sum = 1.337362
    chain 2 domain 11: d0 0.335, d1 0.334, d2 0.332, d3 0.333, sum = 1.334513
    chain 2 domain 12: d0 0.332, d1 0.335, d2 0.333, d3 0.334, sum = 1.333130
    chain 2 domain 13: d0 0.346, d1 0.345, d2 0.345, d3 0.343, sum = 1.379639
    chain 2 domain 14: d0 0.334, d1 0.337, d2 0.335, d3 0.335, sum = 1.342082
    2021-03-10 09:29:46:driver-hash-chip.c:493:check_adc_voltage: PASS domainn volt check: request 0.800 (index 0, open_core)
    2021-03-10 09:29:48:temperature.c:272:calibrate_temp_sensor_one_chain: chain 1 temp sensor NCT218
    2021-03-10 09:29:49:temperature.c:272:calibrate_temp_sensor_one_chain: chain 2 temp sensor NCT218
    2021-03-10 09:29:55:driver-btm-api.c:311:check_bringup_temp: Bring up temperature is 6
    2021-03-10 09:29:55:uart.c:69:set_baud: set UART baud to 6000000
    2021-03-10 09:29:55 voltage[1] = 1850
    2021-03-10 09:29:55 voltage[2] = 1850
    2021-03-10 09:29:55:power_api.c:272:set_working_voltage_raw: working_voltage_raw = 1850
    2021-03-10 09:29:55:thread.c:1538:create_check_miner_status_thread: create thread
    2021-03-10 09:29:55:thread.c:1528:create_show_miner_status_thread: create thread
    2021-03-10 09:29:55:thread.c:1503:create_temperature_monitor_thread: create thread
    2021-03-10 09:29:55:thread.c:1580:create_fan_monitor_thread: create thread
    2021-03-10 09:29:55:frequency.c:578:inc_freq_with_fixed_vco: chain = 255, freq = 410, is_higher_voltage = true
    2021-03-10 09:30:01:frequency.c:623:inc_freq_with_fixed_vco: get pcb 5 ~ 12, chip_temp 11 ~ 18, now 6.0s, target 19.0
    2021-03-10 09:30:02:frequency.c:623:inc_freq_with_fixed_vco: get pcb 6 ~ 13, chip_temp 11 ~ 19, now 7.0s, target 19.2
    2021-03-10 09:30:03:frequency.c:623:inc_freq_with_fixed_vco: get pcb 7 ~ 13, chip_temp 11 ~ 18, now 8.0s, target 19.3
    2021-03-10 09:30:04:frequency.c:623:inc_freq_with_fixed_vco: get pcb 7 ~ 14, chip_temp 11 ~ 18, now 9.0s, target 19.5
    2021-03-10 09:30:05:frequency.c:623:inc_freq_with_fixed_vco: get pcb 7 ~ 13, chip_temp 11 ~ 18, now 10.0s, target 19.7
    2021-03-10 09:30:06:frequency.c:623:inc_freq_with_fixed_vco: get pcb 7 ~ 13, chip_temp 12 ~ 19, now 11.0s, target 19.8
    2021-03-10 09:30:07:frequency.c:623:inc_freq_with_fixed_vco: get pcb 8 ~ 13, chip_temp 12 ~ 18, now 12.0s, target 20.0
    2021-03-10 09:30:07:frequency.c:657:inc_freq_with_fixed_vco: [0] _POSTDIV1 = 7, _POSTDIV2 = 7, USER_DIV = 1, freq = 41
    2021-03-10 09:30:13:frequency.c:623:inc_freq_with_fixed_vco: get pcb 9 ~ 14, chip_temp 12 ~ 18, now 18.0s, target 21.0
    2021-03-10 09:30:13:frequency.c:657:inc_freq_with_fixed_vco: [1] _POSTDIV1 = 7, _POSTDIV2 = 6, USER_DIV = 1, freq = 48
    2021-03-10 09:30:19:frequency.c:623:inc_freq_with_fixed_vco: get pcb 9 ~ 14, chip_temp 11 ~ 19, now 24.0s, target 22.0
    2021-03-10 09:30:19:frequency.c:657:inc_freq_with_fixed_vco: [2] _POSTDIV1 = 6, _POSTDIV2 = 6, USER_DIV = 1, freq = 56
    2021-03-10 09:30:19:frequency.c:665:inc_freq_with_fixed_vco: set to 56M, get pcb 9 ~ 14, chip_temp 11 ~ 19
    2021-03-10 09:30:19:power_api.c:376:set_to_voltage_by_steps: Set to voltage raw 2100, step by step.
    2021-03-10 09:30:34:frequency.c:671:inc_freq_with_fixed_vco: freq_mode 1=1 FREQ_MODE_USER, Conf.Check_Clock_Cnt=0
    2021-03-10 09:30:34:driver-btm-api.c:1941:check_clock_counter_domain_last_core: freq 56 clock_counter_limit 5, no check, skip.
    2021-03-10 09:30:42:frequency.c:623:inc_freq_with_fixed_vco: get pcb 9 ~ 19, chip_temp 11 ~ 27, now 46.9s, target 25.8
    2021-03-10 09:30:42:frequency.c:644:inc_freq_with_fixed_vco: heat speed too fast! current_temp 27 > 25.8 target_temp.
    2021-03-10 09:30:48:frequency.c:623:inc_freq_with_fixed_vco: get pcb 9 ~ 21, chip_temp 11 ~ 29, now 52.9s, target 26.8
    2021-03-10 09:30:48:frequency.c:644:inc_freq_with_fixed_vco: heat speed too fast! current_temp 29 > 26.8 target_temp.
    2021-03-10 09:30:54:frequency.c:623:inc_freq_with_fixed_vco: get pcb 9 ~ 23, chip_temp 11 ~ 31, now 58.9s, target 27.8
    2021-03-10 09:30:54:frequency.c:644:inc_freq_with_fixed_vco: heat speed too fast! current_temp 31 > 27.8 target_temp.
    2021-03-10 09:31:00:frequency.c:623:inc_freq_with_fixed_vco: get pcb 8 ~ 25, chip_temp 10 ~ 33, now 64.9s, target 28.8
    2021-03-10 09:31:00:frequency.c:644:inc_freq_with_fixed_vco: heat speed too fast! current_temp 33 > 28.8 target_temp.
    2021-03-10 09:31:06:frequency.c:623:inc_freq_with_fixed_vco: get pcb 8 ~ 27, chip_temp 11 ~ 36, now 70.9s, target 29.8
    2021-03-10 09:31:06:frequency.c:644:inc_freq_with_fixed_vco: heat speed too fast! current_temp 36 > 29.8 target_temp.
    2021-03-10 09:31:12:frequency.c:623:inc_freq_with_fixed_vco: get pcb 8 ~ 29, chip_temp 10 ~ 38, now 76.9s, target 30.8
    2021-03-10 09:31:12:frequency.c:644:inc_freq_with_fixed_vco: heat speed too fast! current_temp 38 > 30.8 target_temp.
    2021-03-10 09:31:18:frequency.c:623:inc_freq_with_fixed_vco: get pcb 8 ~ 30, chip_temp 10 ~ 40, now 82.9s, target 31.8
    2021-03-10 09:31:18:frequency.c:644:inc_freq_with_fixed_vco: heat speed too fast! current_temp 40 > 31.8 target_temp.
    2021-03-10 09:31:24:frequency.c:623:inc_freq_with_fixed_vco: get pcb 8 ~ 32, chip_temp 10 ~ 42, now 88.9s, target 32.8
    2021-03-10 09:31:24:frequency.c:644:inc_freq_with_fixed_vco: heat speed too fast! current_temp 42 > 32.8 target_temp.
    2021-03-10 09:31:30:frequency.c:623:inc_freq_with_fixed_vco: get pcb 8 ~ 34, chip_temp 10 ~ 45, now 94.9s, target 33.8
    2021-03-10 09:31:30:frequency.c:644:inc_freq_with_fixed_vco: heat speed too fast! current_temp 45 > 33.8 target_temp.
    2021-03-10 09:31:36:frequency.c:623:inc_freq_with_fixed_vco: get pcb 8 ~ 36, chip_temp 10 ~ 47, now 100.9s, target 34.8
    2021-03-10 09:31:36:frequency.c:644:inc_freq_with_fixed_vco: heat speed too fast! current_temp 47 > 34.8 target_temp.
    2021-03-10 09:31:42:frequency.c:623:inc_freq_with_fixed_vco: get pcb 8 ~ 37, chip_temp 10 ~ 50, now 106.9s, target 35.8
    2021-03-10 09:31:42:frequency.c:644:inc_freq_with_fixed_vco: heat speed too fast! current_temp 50 > 35.8 target_temp.
    2021-03-10 09:31:48:frequency.c:623:inc_freq_with_fixed_vco: get pcb 8 ~ 39, chip_temp 10 ~ 53, now 112.9s, target 36.8
    2021-03-10 09:31:48:frequency.c:644:inc_freq_with_fixed_vco: heat speed too fast! current_temp 53 > 36.8 target_temp.
    2021-03-10 09:31:54:frequency.c:623:inc_freq_with_fixed_vco: get pcb 8 ~ 42, chip_temp 9 ~ 56, now 118.9s, target 37.8
    2021-03-10 09:31:54:frequency.c:644:inc_freq_with_fixed_vco: heat speed too fast! current_temp 56 > 37.8 target_temp.
    2021-03-10 09:32:00:frequency.c:623:inc_freq_with_fixed_vco: get pcb 8 ~ 44, chip_temp 10 ~ 59, now 124.9s, target 38.8
    2021-03-10 09:32:00:frequency.c:644:inc_freq_with_fixed_vco: heat speed too fast! current_temp 59 > 38.8 target_temp.
    2021-03-10 09:32:06:frequency.c:623:inc_freq_with_fixed_vco: get pcb 7 ~ 46, chip_temp 10 ~ 62, now 130.9s, target 39.8
    2021-03-10 09:32:06:frequency.c:644:inc_freq_with_fixed_vco: heat speed too fast! current_temp 62 > 39.8 target_temp.
    2021-03-10 09:32:12:frequency.c:623:inc_freq_with_fixed_vco: get pcb 8 ~ 46, chip_temp 10 ~ 63, now 137.0s, target 40.8
    2021-03-10 09:32:12:frequency.c:644:inc_freq_with_fixed_vco: heat speed too fast! current_temp 63 > 40.8 target_temp.
    2021-03-10 09:32:18:frequency.c:623:inc_freq_with_fixed_vco: get pcb 8 ~ 48, chip_temp 10 ~ 64, now 143.0s, target 41.8
    2021-03-10 09:32:18:frequency.c:644:inc_freq_with_fixed_vco: heat speed too fast! current_temp 64 > 41.8 target_temp.
    2021-03-10 09:32:24:frequency.c:623:inc_freq_with_fixed_vco: get pcb 8 ~ 49, chip_temp 10 ~ 66, now 149.0s, target 42.8
    2021-03-10 09:32:24:frequency.c:644:inc_freq_with_fixed_vco: heat speed too fast! current_temp 66 > 42.8 target_temp.
    2021-03-10 09:32:30:frequency.c:623:inc_freq_with_fixed_vco: get pcb 9 ~ 50, chip_temp 11 ~ 67, now 155.0s, target 43.8
    2021-03-10 09:32:30:frequency.c:644:inc_freq_with_fixed_vco: heat speed too fast! current_temp 67 > 43.8 target_temp.
    2021-03-10 09:32:36:frequency.c:623:inc_freq_with_fixed_vco: get pcb 9 ~ 49, chip_temp 12 ~ 65, now 161.0s, target 44.8
    2021-03-10 09:32:36:frequency.c:644:inc_freq_with_fixed_vco: heat speed too fast! current_temp 65 > 44.8 target_temp.
    2021-03-10 09:32:42:frequency.c:623:inc_freq_with_fixed_vco: get pcb 10 ~ 50, chip_temp 12 ~ 66, now 167.0s, target 45.8
    2021-03-10 09:32:42:frequency.c:644:inc_freq_with_fixed_vco: heat speed too fast! current_temp 66 > 45.8 target_temp.
    2021-03-10 09:32:48:frequency.c:623:inc_freq_with_fixed_vco: get pcb 10 ~ 50, chip_temp 12 ~ 65, now 173.0s, target 46.8
    2021-03-10 09:32:48:frequency.c:644:inc_freq_with_fixed_vco: heat speed too fast! current_temp 65 > 46.8 target_temp.
    2021-03-10 09:32:54:frequency.c:623:inc_freq_with_fixed_vco: get pcb 12 ~ 50, chip_temp 13 ~ 66, now 179.0s, target 47.8
    2021-03-10 09:32:54:frequency.c:644:inc_freq_with_fixed_vco: heat speed too fast! current_temp 66 > 47.8 target_temp.
    2021-03-10 09:33:00:frequency.c:623:inc_freq_with_fixed_vco: get pcb 11 ~ 49, chip_temp 13 ~ 66, now 185.0s, target 48.8
    2021-03-10 09:33:00:frequency.c:644:inc_freq_with_fixed_vco: heat speed too fast! current_temp 66 > 48.8 target_temp.
    2021-03-10 09:33:06:frequency.c:623:inc_freq_with_fixed_vco: get pcb 11 ~ 50, chip_temp 14 ~ 65, now 191.0s, target 49.8
    2021-03-10 09:33:06:frequency.c:644:inc_freq_with_fixed_vco: heat speed too fast! current_temp 65 > 49.8 target_temp.
    2021-03-10 09:33:12:frequency.c:623:inc_freq_with_fixed_vco: get pcb 13 ~ 48, chip_temp 14 ~ 65, now 197.0s, target 50.8
    2021-03-10 09:33:12:frequency.c:644:inc_freq_with_fixed_vco: heat speed too fast! current_temp 65 > 50.8 target_temp.
    2021-03-10 09:33:18:frequency.c:623:inc_freq_with_fixed_vco: get pcb 13 ~ 49, chip_temp 15 ~ 65, now 203.0s, target 51.8
    2021-03-10 09:33:18:frequency.c:644:inc_freq_with_fixed_vco: heat speed too fast! current_temp 65 > 51.8 target_temp.
    2021-03-10 09:33:24:frequency.c:623:inc_freq_with_fixed_vco: get pcb 13 ~ 48, chip_temp 15 ~ 65, now 209.0s, target 52.8
    2021-03-10 09:33:24:frequency.c:644:inc_freq_with_fixed_vco: heat speed too fast! current_temp 65 > 52.8 target_temp.
    2021-03-10 09:33:30:frequency.c:623:inc_freq_with_fixed_vco: get pcb 13 ~ 48, chip_temp 15 ~ 65, now 215.0s, target 53.8
    2021-03-10 09:33:30:frequency.c:644:inc_freq_with_fixed_vco: heat speed too fast! current_temp 65 > 53.8 target_temp.
    2021-03-10 09:33:36:frequency.c:623:inc_freq_with_fixed_vco: get pcb 14 ~ 48, chip_temp 15 ~ 66, now 221.0s, target 54.8
    2021-03-10 09:33:36:frequency.c:644:inc_freq_with_fixed_vco: heat speed too fast! current_temp 66 > 54.8 target_temp.
    2021-03-10 09:33:42:frequency.c:623:inc_freq_with_fixed_vco: get pcb 15 ~ 49, chip_temp 15 ~ 65, now 227.0s, target 55.8
    2021-03-10 09:33:42:frequency.c:644:inc_freq_with_fixed_vco: heat speed too fast! current_temp 65 > 55.8 target_temp.
    2021-03-10 09:33:48:frequency.c:623:inc_freq_with_fixed_vco: get pcb 15 ~ 49, chip_temp 16 ~ 64, now 233.0s, target 56.8
    2021-03-10 09:33:48:frequency.c:644:inc_freq_with_fixed_vco: heat speed too fast! current_temp 64 > 56.8 target_temp.
    2021-03-10 09:33:54:frequency.c:623:inc_freq_with_fixed_vco: get pcb 15 ~ 48, chip_temp 16 ~ 66, now 239.0s, target 57.8
    2021-03-10 09:33:54:frequency.c:644:inc_freq_with_fixed_vco: heat speed too fast! current_temp 66 > 57.8 target_temp.
    2021-03-10 09:34:00:frequency.c:623:inc_freq_with_fixed_vco: get pcb 16 ~ 49, chip_temp 16 ~ 65, now 245.0s, target 58.8
    2021-03-10 09:34:00:frequency.c:644:inc_freq_with_fixed_vco: heat speed too fast! current_temp 65 > 58.8 target_temp.
    2021-03-10 09:34:06:frequency.c:623:inc_freq_with_fixed_vco: get pcb 16 ~ 48, chip_temp 16 ~ 65, now 251.0s, target 59.8
    2021-03-10 09:34:06:frequency.c:644:inc_freq_with_fixed_vco: heat speed too fast! current_temp 65 > 59.8 target_temp.
    2021-03-10 09:34:12:frequency.c:623:inc_freq_with_fixed_vco: get pcb 16 ~ 48, chip_temp 18 ~ 64, now 257.0s, target 60.8
    2021-03-10 09:34:12:frequency.c:644:inc_freq_with_fixed_vco: heat speed too fast! current_temp 64 > 60.8 target_temp.
    2021-03-10 09:34:18:frequency.c:623:inc_freq_with_fixed_vco: get pcb 16 ~ 48, chip_temp 18 ~ 65, now 263.0s, target 61.8
    2021-03-10 09:34:18:frequency.c:644:inc_freq_with_fixed_vco: heat speed too fast! current_temp 65 > 61.8 target_temp.
    2021-03-10 09:34:24:frequency.c:623:inc_freq_with_fixed_vco: get pcb 17 ~ 48, chip_temp 18 ~ 64, now 269.0s, target 62.8
    2021-03-10 09:34:24:frequency.c:644:inc_freq_with_fixed_vco: heat speed too fast! current_temp 64 > 62.8 target_temp.
    2021-03-10 09:34:30:frequency.c:623:inc_freq_with_fixed_vco: get pcb 17 ~ 48, chip_temp 18 ~ 66, now 275.0s, target 63.8
    2021-03-10 09:34:30:frequency.c:644:inc_freq_with_fixed_vco: heat speed too fast! current_temp 66 > 63.8 target_temp.
    2021-03-10 09:34:36:frequency.c:623:inc_freq_with_fixed_vco: get pcb 17 ~ 48, chip_temp 17 ~ 66, now 281.0s, target 64.8
    2021-03-10 09:34:36:frequency.c:644:inc_freq_with_fixed_vco: heat speed too fast! current_temp 66 > 64.8 target_temp.
    2021-03-10 09:34:42:frequency.c:623:inc_freq_with_fixed_vco: get pcb 17 ~ 49, chip_temp 18 ~ 67, now 287.0s, target 65.8
    2021-03-10 09:34:42:frequency.c:644:inc_freq_with_fixed_vco: heat speed too fast! current_temp 67 > 65.8 target_temp.
    2021-03-10 09:34:48:frequency.c:623:inc_freq_with_fixed_vco: get pcb 18 ~ 49, chip_temp 18 ~ 66, now 293.0s, target 66.8
    2021-03-10 09:34:49:frequency.c:623:inc_freq_with_fixed_vco: get pcb 18 ~ 47, chip_temp 18 ~ 66, now 294.0s, target 67.0
    2021-03-10 09:34:50:frequency.c:623:inc_freq_with_fixed_vco: get pcb 18 ~ 48, chip_temp 19 ~ 66, now 295.0s, target 67.2
    2021-03-10 09:34:51:frequency.c:623:inc_freq_with_fixed_vco: get pcb 18 ~ 48, chip_temp 19 ~ 65, now 296.0s, target 67.3
    2021-03-10 09:34:51:frequency.c:657:inc_freq_with_fixed_vco: [3] _POSTDIV1 = 7, _POSTDIV2 = 5, USER_DIV = 1, freq = 58
    2021-03-10 09:34:51:frequency.c:665:inc_freq_with_fixed_vco: set to 58M, get pcb 18 ~ 48, chip_temp 19 ~ 65
    2021-03-10 09:34:51:frequency.c:671:inc_freq_with_fixed_vco: freq_mode 1=1 FREQ_MODE_USER, Conf.Check_Clock_Cnt=0
    2021-03-10 09:34:51:driver-btm-api.c:1941:check_clock_counter_domain_last_core: freq 58 clock_counter_limit 6, no check, skip.
    2021-03-10 09:34:59:frequency.c:623:inc_freq_with_fixed_vco: get pcb 19 ~ 48, chip_temp 20 ~ 64, now 304.0s, target 68.7
    2021-03-10 09:34:59:frequency.c:657:inc_freq_with_fixed_vco: [4] _POSTDIV1 = 6, _POSTDIV2 = 5, USER_DIV = 1, freq = 68
    2021-03-10 09:34:59:frequency.c:665:inc_freq_with_fixed_vco: set to 68M, get pcb 19 ~ 48, chip_temp 20 ~ 64
    2021-03-10 09:34:59:frequency.c:671:inc_freq_with_fixed_vco: freq_mode 1=1 FREQ_MODE_USER, Conf.Check_Clock_Cnt=0
    2021-03-10 09:34:59:driver-btm-api.c:1941:check_clock_counter_domain_last_core: freq 68 clock_counter_limit 7, no check, skip.
    2021-03-10 09:35:07:frequency.c:623:inc_freq_with_fixed_vco: get pcb 20 ~ 48, chip_temp 20 ~ 64, now 312.0s, target 70.0
    2021-03-10 09:35:07:frequency.c:657:inc_freq_with_fixed_vco: [5] _POSTDIV1 = 7, _POSTDIV2 = 4, USER_DIV = 1, freq = 73
    2021-03-10 09:35:07:frequency.c:665:inc_freq_with_fixed_vco: set to 73M, get pcb 20 ~ 48, chip_temp 20 ~ 64
    2021-03-10 09:35:07:frequency.c:671:inc_freq_with_fixed_vco: freq_mode 1=1 FREQ_MODE_USER, Conf.Check_Clock_Cnt=0
    2021-03-10 09:35:07:driver-btm-api.c:1941:check_clock_counter_domain_last_core: freq 73 clock_counter_limit 8, no check, skip.
    2021-03-10 09:35:15:frequency.c:623:inc_freq_with_fixed_vco: get pcb 20 ~ 48, chip_temp 21 ~ 66, now 320.0s, target 67.3
    2021-03-10 09:35:16:frequency.c:623:inc_freq_with_fixed_vco: get pcb 20 ~ 47, chip_temp 21 ~ 65, now 321.0s, target 67.5
    2021-03-10 09:35:16:frequency.c:657:inc_freq_with_fixed_vco: [6] _POSTDIV1 = 5, _POSTDIV2 = 5, USER_DIV = 1, freq = 82
    2021-03-10 09:35:16:frequency.c:665:inc_freq_with_fixed_vco: set to 82M, get pcb 20 ~ 47, chip_temp 21 ~ 65
    2021-03-10 09:35:16:frequency.c:671:inc_freq_with_fixed_vco: freq_mode 1=1 FREQ_MODE_USER, Conf.Check_Clock_Cnt=0
    2021-03-10 09:35:16:driver-btm-api.c:1941:check_clock_counter_domain_last_core: freq 82 clock_counter_limit 10, no check, skip.
    2021-03-10 09:35:24:frequency.c:623:inc_freq_with_fixed_vco: get pcb 20 ~ 47, chip_temp 22 ~ 66, now 329.0s, target 68.8
    2021-03-10 09:35:24:frequency.c:657:inc_freq_with_fixed_vco: [7] _POSTDIV1 = 6, _POSTDIV2 = 4, USER_DIV = 1, freq = 85
    2021-03-10 09:35:24:frequency.c:665:inc_freq_with_fixed_vco: set to 85M, get pcb 20 ~ 47, chip_temp 22 ~ 66
    2021-03-10 09:35:24:frequency.c:671:inc_freq_with_fixed_vco: freq_mode 1=1 FREQ_MODE_USER, Conf.Check_Clock_Cnt=0
    2021-03-10 09:35:24:driver-btm-api.c:1941:check_clock_counter_domain_last_core: freq 85 clock_counter_limit 10, no check, skip.
    2021-03-10 09:35:32:frequency.c:623:inc_freq_with_fixed_vco: get pcb 21 ~ 48, chip_temp 23 ~ 66, now 337.1s, target 70.2
    2021-03-10 09:35:32:frequency.c:657:inc_freq_with_fixed_vco: [8] _POSTDIV1 = 7, _POSTDIV2 = 3, USER_DIV = 1, freq = 97
    2021-03-10 09:35:32:frequency.c:665:inc_freq_with_fixed_vco: set to 97M, get pcb 21 ~ 48, chip_temp 23 ~ 66
    2021-03-10 09:35:32:frequency.c:671:inc_freq_with_fixed_vco: freq_mode 1=1 FREQ_MODE_USER, Conf.Check_Clock_Cnt=0
    2021-03-10 09:35:32:driver-btm-api.c:1941:check_clock_counter_domain_last_core: freq 97 clock_counter_limit 12, no check, skip.
    2021-03-10 09:35:40:frequency.c:623:inc_freq_with_fixed_vco: get pcb 21 ~ 46, chip_temp 24 ~ 66, now 345.1s, target 71.5
    2021-03-10 09:35:40:frequency.c:657:inc_freq_with_fixed_vco: [9] _POSTDIV1 = 5, _POSTDIV2 = 4, USER_DIV = 1, freq = 102
    2021-03-10 09:35:40:frequency.c:665:inc_freq_with_fixed_vco: set to 102M, get pcb 21 ~ 46, chip_temp 24 ~ 66
    2021-03-10 09:35:40:frequency.c:671:inc_freq_with_fixed_vco: freq_mode 1=1 FREQ_MODE_USER, Conf.Check_Clock_Cnt=0
    2021-03-10 09:35:40:driver-btm-api.c:1941:check_clock_counter_domain_last_core: freq 102 clock_counter_limit 13, no check, skip.
    2021-03-10 09:35:48:frequency.c:623:inc_freq_with_fixed_vco: get pcb 20 ~ 47, chip_temp 25 ~ 66, now 353.1s, target 69.8
    2021-03-10 09:35:48:frequency.c:657:inc_freq_with_fixed_vco: [10] _POSTDIV1 = 6, _POSTDIV2 = 3, USER_DIV = 1, freq = 113
    2021-03-10 09:35:48:frequency.c:665:inc_freq_with_fixed_vco: set to 113M, get pcb 20 ~ 47, chip_temp 25 ~ 66
    2021-03-10 09:35:48:frequency.c:671:inc_freq_with_fixed_vco: freq_mode 1=1 FREQ_MODE_USER, Conf.Check_Clock_Cnt=0
    2021-03-10 09:35:48:driver-btm-api.c:1941:check_clock_counter_domain_last_core: freq 113 clock_counter_limit 15, no check, skip.
    2021-03-10 09:35:56:frequency.c:623:inc_freq_with_fixed_vco: get pcb 20 ~ 48, chip_temp 25 ~ 65, now 361.1s, target 71.2
    2021-03-10 09:35:56:frequency.c:657:inc_freq_with_fixed_vco: [11] _POSTDIV1 = 5, _POSTDIV2 = 3, USER_DIV = 1, freq = 136
    2021-03-10 09:35:56:frequency.c:665:inc_freq_with_fixed_vco: set to 136M, get pcb 20 ~ 48, chip_temp 25 ~ 65
    2021-03-10 09:35:56:frequency.c:671:inc_freq_with_fixed_vco: freq_mode 1=1 FREQ_MODE_USER, Conf.Check_Clock_Cnt=0
    2021-03-10 09:35:56:driver-btm-api.c:1941:check_clock_counter_domain_last_core: freq 136 clock_counter_limit 18, no check, skip.
    2021-03-10 09:36:04:frequency.c:623:inc_freq_with_fixed_vco: get pcb 20 ~ 49, chip_temp 27 ~ 67, now 369.1s, target 68.5
    2021-03-10 09:36:05:frequency.c:623:inc_freq_with_fixed_vco: get pcb 19 ~ 50, chip_temp 27 ~ 67, now 370.1s, target 68.7
    2021-03-10 09:36:06:frequency.c:623:inc_freq_with_fixed_vco: get pcb 19 ~ 51, chip_temp 28 ~ 66, now 371.1s, target 68.9
    2021-03-10 09:36:06:frequency.c:657:inc_freq_with_fixed_vco: [12] _POSTDIV1 = 7, _POSTDIV2 = 2, USER_DIV = 1, freq = 146
    2021-03-10 09:36:06:frequency.c:665:inc_freq_with_fixed_vco: set to 146M, get pcb 19 ~ 51, chip_temp 28 ~ 66
    2021-03-10 09:36:06:frequency.c:671:inc_freq_with_fixed_vco: freq_mode 1=1 FREQ_MODE_USER, Conf.Check_Clock_Cnt=0
    2021-03-10 09:36:06:driver-btm-api.c:1941:check_clock_counter_domain_last_core: freq 146 clock_counter_limit 20, no check, skip.
    2021-03-10 09:36:14:frequency.c:623:inc_freq_with_fixed_vco: get pcb 19 ~ 52, chip_temp 30 ~ 65, now 379.1s, target 70.2
    2021-03-10 09:36:14:frequency.c:657:inc_freq_with_fixed_vco: [13] _POSTDIV1 = 6, _POSTDIV2 = 2, USER_DIV = 1, freq = 170
    2021-03-10 09:36:14:frequency.c:665:inc_freq_with_fixed_vco: set to 170M, get pcb 19 ~ 52, chip_temp 30 ~ 65
    2021-03-10 09:36:14:frequency.c:671:inc_freq_with_fixed_vco: freq_mode 1=1 FREQ_MODE_USER, Conf.Check_Clock_Cnt=0
    2021-03-10 09:36:14:driver-btm-api.c:1941:check_clock_counter_domain_last_core: freq 170 clock_counter_limit 24, no check, skip.
    2021-03-10 09:36:22:frequency.c:623:inc_freq_with_fixed_vco: get pcb 19 ~ 53, chip_temp 32 ~ 66, now 387.1s, target 68.5
    2021-03-10 09:36:22:frequency.c:657:inc_freq_with_fixed_vco: [14] _POSTDIV1 = 5, _POSTDIV2 = 2, USER_DIV = 1, freq = 205
    2021-03-10 09:36:22:frequency.c:665:inc_freq_with_fixed_vco: set to 205M, get pcb 19 ~ 53, chip_temp 32 ~ 66
    2021-03-10 09:36:22:frequency.c:671:inc_freq_with_fixed_vco: freq_mode 1=1 FREQ_MODE_USER, Conf.Check_Clock_Cnt=0
    2021-03-10 09:36:22:driver-btm-api.c:1941:check_clock_counter_domain_last_core: freq 205 clock_counter_limit 29, no check, skip.
    2021-03-10 09:36:30:frequency.c:623:inc_freq_with_fixed_vco: get pcb 19 ~ 55, chip_temp 35 ~ 68, now 395.2s, target 69.9
    2021-03-10 09:36:31:frequency.c:623:inc_freq_with_fixed_vco: get pcb 20 ~ 56, chip_temp 35 ~ 68, now 396.2s, target 70.0
    2021-03-10 09:36:31:frequency.c:657:inc_freq_with_fixed_vco: [15] _POSTDIV1 = 7, _POSTDIV2 = 1, USER_DIV = 1, freq = 292
    2021-03-10 09:36:31:frequency.c:665:inc_freq_with_fixed_vco: set to 292M, get pcb 20 ~ 56, chip_temp 35 ~ 68
    2021-03-10 09:36:31:frequency.c:671:inc_freq_with_fixed_vco: freq_mode 1=1 FREQ_MODE_USER, Conf.Check_Clock_Cnt=0
    2021-03-10 09:36:31:driver-btm-api.c:1941:check_clock_counter_domain_last_core: freq 292 clock_counter_limit 43, no check, skip.
    2021-03-10 09:36:39:frequency.c:623:inc_freq_with_fixed_vco: get pcb 20 ~ 58, chip_temp 38 ~ 73, now 404.2s, target 71.4
    2021-03-10 09:36:39:frequency.c:644:inc_freq_with_fixed_vco: heat speed too fast! current_temp 73 > 71.4 target_temp.
    2021-03-10 09:36:45:frequency.c:623:inc_freq_with_fixed_vco: get pcb 20 ~ 60, chip_temp 39 ~ 74, now 410.2s, target 72.4
    2021-03-10 09:36:45:frequency.c:644:inc_freq_with_fixed_vco: heat speed too fast! current_temp 74 > 72.4 target_temp.
    2021-03-10 09:36:51:frequency.c:623:inc_freq_with_fixed_vco: get pcb 22 ~ 62, chip_temp 41 ~ 77, now 416.2s, target 73.4
    2021-03-10 09:36:51:frequency.c:644:inc_freq_with_fixed_vco: heat speed too fast! current_temp 77 > 73.4 target_temp.
    2021-03-10 09:36:57:frequency.c:623:inc_freq_with_fixed_vco: get pcb 22 ~ 63, chip_temp 41 ~ 78, now 422.2s, target 74.4
    2021-03-10 09:36:57:frequency.c:644:inc_freq_with_fixed_vco: heat speed too fast! current_temp 78 > 74.4 target_temp.
    2021-03-10 09:37:03:frequency.c:623:inc_freq_with_fixed_vco: get pcb 23 ~ 65, chip_temp 43 ~ 81, now 428.2s, target 75.4
    2021-03-10 09:37:03:frequency.c:644:inc_freq_with_fixed_vco: heat speed too fast! current_temp 81 > 75.4 target_temp.
    2021-03-10 09:37:09:frequency.c:623:inc_freq_with_fixed_vco: get pcb 25 ~ 68, chip_temp 43 ~ 84, now 434.2s, target 76.4
    2021-03-10 09:37:09:frequency.c:644:inc_freq_with_fixed_vco: heat speed too fast! current_temp 84 > 76.4 target_temp.
    2021-03-10 09:37:15:frequency.c:623:inc_freq_with_fixed_vco: get pcb 25 ~ 69, chip_temp 45 ~ 86, now 440.2s, target 77.4
    2021-03-10 09:37:15:frequency.c:644:inc_freq_with_fixed_vco: heat speed too fast! current_temp 86 > 77.4 target_temp.
    2021-03-10 09:37:21:frequency.c:623:inc_freq_with_fixed_vco: get pcb 27 ~ 71, chip_temp 46 ~ 89, now 446.2s, target 78.4
    2021-03-10 09:37:21:frequency.c:644:inc_freq_with_fixed_vco: heat speed too fast! current_temp 89 > 78.4 target_temp.
    2021-03-10 09:37:27:frequency.c:623:inc_freq_with_fixed_vco: get pcb 26 ~ 72, chip_temp 48 ~ 91, now 452.2s, target 79.4
    2021-03-10 09:37:27:frequency.c:644:inc_freq_with_fixed_vco: heat speed too fast! current_temp 91 > 79.4 target_temp.
    2021-03-10 09:37:33:frequency.c:623:inc_freq_with_fixed_vco: get pcb 27 ~ 75, chip_temp 49 ~ 93, now 458.2s, target 80.4
    2021-03-10 09:37:33:frequency.c:644:inc_freq_with_fixed_vco: heat speed too fast! current_temp 93 > 80.4 target_temp.
    2021-03-10 09:37:39:frequency.c:623:inc_freq_with_fixed_vco: get pcb 27 ~ 77, chip_temp 50 ~ 96, now 464.2s, target 81.4
    2021-03-10 09:37:39:frequency.c:644:inc_freq_with_fixed_vco: heat speed too fast! current_temp 96 > 81.4 target_temp.
    2021-03-10 09:37:45:thread.c:849:check_temperature: over max temp, pcb temp 79 (max 80), chip temp 99(max 98)
    2021-03-10 09:37:45:driver-btm-api.c:247:set_miner_status: ERROR_TEMP_TOO_HIGH
    2021-03-10 09:37:45:driver-btm-api.c:176:stop_mining: stop mining: over max temp
    2021-03-10 09:37:45:thread.c:1575:cancel_temperature_monitor_thread: cancel thread
    2021-03-10 09:37:45:thread.c:1595:cancel_read_nonce_reg_thread: cancel thread
    2021-03-10 09:37:45:thread.c:1631:cancel_bitmain_soc_init_thread: cancel thread
    2021-03-10 09:37:45:driver-btm-api.c:147:killall_hashboard: ****power off hashboard****

     

    0
    Comment actions Permalink

    Same 2 Boards

    Outside -5 deg C

    2714W  @ 18.3V

     

    Booting Linux on physical CPU 0x0
    Linux version 4.6.0-xilinx-gff8137b-dirty (lzq@armdev2) (gcc version 4.8.3 20140320 (prerelease) (Sourcery CodeBench Lite 2014.05-23) ) #25 SMP PREEMPT Fri Nov 23 15:30:52 CST 2018
    CPU: ARMv7 Processor [413fc090] revision 0 (ARMv7), cr=18c5387d
    CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
    Machine model: Xilinx Zynq
    cma: Reserved 16 MiB at 0x0e000000
    Memory policy: Data cache writealloc
    On node 0 totalpages: 61440
    free_area_init_node: node 0, pgdat c0b39280, node_mem_map cde10000
    Normal zone: 480 pages used for memmap
    Normal zone: 0 pages reserved
    Normal zone: 61440 pages, LIFO batch:15
    percpu: Embedded 12 pages/cpu @cddf1000 s19776 r8192 d21184 u49152
    pcpu-alloc: s19776 r8192 d21184 u49152 alloc=12*4096
    pcpu-alloc: [0] 0 [0] 1
    Built 1 zonelists in Zone order, mobility grouping on. Total pages: 60960
    Kernel command line: mem=240M console=ttyPS0,115200 ramdisk_size=33554432 root=/dev/ram rw earlyprintk
    PID hash table entries: 1024 (order: 0, 4096 bytes)
    Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
    Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
    Memory: 203428K/245760K available (6345K kernel code, 231K rwdata, 1896K rodata, 1024K init, 223K bss, 25948K reserved, 16384K cma-reserved, 0K highmem)
    Virtual kernel memory layout:
    vector : 0xffff0000 - 0xffff1000 ( 4 kB)
    fixmap : 0xffc00000 - 0xfff00000 (3072 kB)
    vmalloc : 0xcf800000 - 0xff800000 ( 768 MB)
    lowmem : 0xc0000000 - 0xcf000000 ( 240 MB)
    pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
    modules : 0xbf000000 - 0xbfe00000 ( 14 MB)
    .text : 0xc0008000 - 0xc090c424 (9234 kB)
    .init : 0xc0a00000 - 0xc0b00000 (1024 kB)
    .data : 0xc0b00000 - 0xc0b39fe0 ( 232 kB)
    .bss : 0xc0b39fe0 - 0xc0b71c28 ( 224 kB)
    Preemptible hierarchical RCU implementation.
    Build-time adjustment of leaf fanout to 32.
    RCU restricting CPUs from NR_CPUS=4 to nr_cpu_ids=2.
    RCU: Adjusting geometry for rcu_fanout_leaf=32, nr_cpu_ids=2
    NR_IRQS:16 nr_irqs:16 16
    efuse mapped to cf800000
    ps7-slcr mapped to cf802000
    L2C: platform modifies aux control register: 0x72360000 -> 0x72760000
    L2C: DT/platform modifies aux control register: 0x72360000 -> 0x72760000
    L2C-310 erratum 769419 enabled
    L2C-310 enabling early BRESP for Cortex-A9
    L2C-310 full line of zeros enabled for Cortex-A9
    L2C-310 ID prefetch enabled, offset 1 lines
    L2C-310 dynamic clock gating enabled, standby mode enabled
    L2C-310 cache controller enabled, 8 ways, 512 kB
    L2C-310: CACHE_ID 0x410000c8, AUX_CTRL 0x76760001
    zynq_clock_init: clkc starts at cf802100
    Zynq clock init
    sched_clock: 64 bits at 333MHz, resolution 3ns, wraps every 4398046511103ns
    clocksource: arm_global_timer: mask: 0xffffffffffffffff max_cycles: 0x4ce07af025, max_idle_ns: 440795209040 ns
    Switching to timer-based delay loop, resolution 3ns
    clocksource: ttc_clocksource: mask: 0xffff max_cycles: 0xffff, max_idle_ns: 537538477 ns
    ps7-ttc #0 at cf80a000, irq=18
    Console: colour dummy device 80x30
    Calibrating delay loop (skipped), value calculated using timer frequency.. 666.66 BogoMIPS (lpj=3333333)
    pid_max: default: 32768 minimum: 301
    Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
    Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
    CPU: Testing write buffer coherency: ok
    CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
    Setting up static identity map for 0x100000 - 0x100058
    CPU1: failed to boot: -1
    Brought up 1 CPUs
    SMP: Total of 1 processors activated (666.66 BogoMIPS).
    CPU: All CPU(s) started in SVC mode.
    devtmpfs: initialized
    VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 4
    clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
    pinctrl core: initialized pinctrl subsystem
    NET: Registered protocol family 16
    DMA: preallocated 256 KiB pool for atomic coherent allocations
    cpuidle: using governor menu
    hw-breakpoint: found 5 (+1 reserved) breakpoint and 1 watchpoint registers.
    hw-breakpoint: maximum watchpoint size is 4 bytes.
    zynq-ocm f800c000.ps7-ocmc: ZYNQ OCM pool: 256 KiB @ 0xcf880000
    vgaarb: loaded
    SCSI subsystem initialized
    usbcore: registered new interface driver usbfs
    usbcore: registered new interface driver hub
    usbcore: registered new device driver usb
    media: Linux media interface: v0.10
    Linux video capture interface: v2.00
    pps_core: LinuxPPS API ver. 1 registered
    pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
    PTP clock support registered
    EDAC MC: Ver: 3.0.0
    Advanced Linux Sound Architecture Driver Initialized.
    clocksource: Switched to clocksource arm_global_timer
    NET: Registered protocol family 2
    TCP established hash table entries: 2048 (order: 1, 8192 bytes)
    TCP bind hash table entries: 2048 (order: 2, 16384 bytes)
    TCP: Hash tables configured (established 2048 bind 2048)
    UDP hash table entries: 256 (order: 1, 8192 bytes)
    UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
    NET: Registered protocol family 1
    RPC: Registered named UNIX socket transport module.
    RPC: Registered udp transport module.
    RPC: Registered tcp transport module.
    RPC: Registered tcp NFSv4.1 backchannel transport module.
    PCI: CLS 0 bytes, default 64
    Trying to unpack rootfs image as initramfs...
    rootfs image is not initramfs (no cpio magic); looks like an initrd
    Freeing initrd memory: 12908K (cce65000 - cdb00000)
    hw perfevents: enabled with armv7_cortex_a9 PMU driver, 7 counters available
    futex hash table entries: 512 (order: 3, 32768 bytes)
    workingset: timestamp_bits=28 max_order=16 bucket_order=0
    jffs2: version 2.2. (NAND) (SUMMARY) © 2001-2006 Red Hat, Inc.
    io scheduler noop registered
    io scheduler deadline registered
    io scheduler cfq registered (default)
    dma-pl330 f8003000.ps7-dma: Loaded driver for PL330 DMAC-241330
    dma-pl330 f8003000.ps7-dma: DBUFF-128x8bytes Num_Chans-8 Num_Peri-4 Num_Events-16
    e0000000.serial: ttyPS0 at MMIO 0xe0000000 (irq = 158, base_baud = 6249999) is a xuartps
    console [ttyPS0] enabled
    xdevcfg f8007000.ps7-dev-cfg: ioremap 0xf8007000 to cf86e000
    [drm] Initialized drm 1.1.0 20060810
    brd: module loaded
    loop: module loaded
    CAN device driver interface
    gpiod_set_value: invalid GPIO
    libphy: MACB_mii_bus: probed
    macb e000b000.ethernet eth0: Cadence GEM rev 0x00020118 at 0xe000b000 irq 31 (00:0a:35:00:00:00)
    Generic PHY e000b000.etherne:00: attached PHY driver [Generic PHY] (mii_bus:phy_addr=e000b000.etherne:00, irq=-1)
    e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k
    e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
    ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
    ehci-pci: EHCI PCI platform driver
    usbcore: registered new interface driver usb-storage
    mousedev: PS/2 mouse device common for all mice
    i2c /dev entries driver
    Xilinx Zynq CpuIdle Driver started
    sdhci: Secure Digital Host Controller Interface driver
    sdhci: Copyright(c) Pierre Ossman
    sdhci-pltfm: SDHCI platform and OF driver helper
    mmc0: SDHCI controller on e0100000.ps7-sdio [e0100000.ps7-sdio] using ADMA
    ledtrig-cpu: registered to indicate activity on CPUs
    usbcore: registered new interface driver usbhid
    usbhid: USB HID core driver
    nand: device found, Manufacturer ID: 0x2c, Chip ID: 0xda
    nand: Micron MT29F2G08ABAGAWP
    nand: 256 MiB, SLC, erase size: 128 KiB, page size: 2048, OOB size: 128
    nand: WARNING: pl35x-nand: the ECC used on your system is too weak compared to the one required by the NAND chip
    Bad block table found at page 131008, version 0x01
    Bad block table found at page 130944, version 0x01
    6 ofpart partitions found on MTD device pl35x-nand
    Creating 6 MTD partitions on "pl35x-nand":
    0x000000000000-0x000002800000 : "BOOT.bin-env-dts-kernel"
    0x000002800000-0x000004800000 : "ramfs"
    0x000004800000-0x000005000000 : "configs"
    0x000005000000-0x000006000000 : "reserve"
    0x000006000000-0x000008000000 : "ramfs-bak"
    0x000008000000-0x000010000000 : "reserve1"
    NET: Registered protocol family 10
    sit: IPv6 over IPv4 tunneling driver
    NET: Registered protocol family 17
    can: controller area network core (rev 20120528 abi 9)
    NET: Registered protocol family 29
    can: raw protocol (rev 20120528)
    can: broadcast manager protocol (rev 20120528 t)
    can: netlink gateway (rev 20130117) max_hops=1
    zynq_pm_ioremap: no compatible node found for 'xlnx,zynq-ddrc-a05'
    zynq_pm_late_init: Unable to map DDRC IO memory.
    Registering SWP/SWPB emulation handler
    hctosys: unable to open rtc device (rtc0)
    ALSA device list:
    No soundcards found.
    RAMDISK: gzip image found at block 0
    EXT4-fs (ram0): couldn't mount as ext3 due to feature incompatibilities
    EXT4-fs (ram0): mounted filesystem without journal. Opts: (null)
    VFS: Mounted root (ext4 filesystem) on device 1:0.
    devtmpfs: mounted
    Freeing unused kernel memory: 1024K (c0a00000 - c0b00000)
    EXT4-fs (ram0): re-mounted. Opts: block_validity,delalloc,barrier,user_xattr
    random: dd urandom read with 0 bits of entropy available
    ubi0: attaching mtd2
    ubi0: scanning is finished
    ubi0: attached mtd2 (name "configs", size 8 MiB)
    ubi0: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes
    ubi0: min./max. I/O unit sizes: 2048/2048, sub-page size 2048
    ubi0: VID header offset: 2048 (aligned 2048), data offset: 4096
    ubi0: good PEBs: 64, bad PEBs: 0, corrupted PEBs: 0
    ubi0: user volume: 1, internal volumes: 1, max. volumes count: 128
    ubi0: max/mean erase counter: 39/17, WL threshold: 4096, image sequence number: 2636279313
    ubi0: available PEBs: 0, total reserved PEBs: 64, PEBs reserved for bad PEB handling: 40
    ubi0: background thread "ubi_bgt0d" started, PID 708
    UBIFS (ubi0:0): background thread "ubifs_bgt0_0" started, PID 711
    UBIFS (ubi0:0): UBIFS: mounted UBI device 0, volume 0, name "configs"
    UBIFS (ubi0:0): LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
    UBIFS (ubi0:0): FS size: 1396736 bytes (1 MiB, 11 LEBs), journal size 888833 bytes (0 MiB, 5 LEBs)
    UBIFS (ubi0:0): reserved for root: 65970 bytes (64 KiB)
    UBIFS (ubi0:0): media format: w4/r0 (latest is w4/r0), UUID A5E2E817-94FA-4998-90AB-D2C873A8EBA9, small LPT model
    ubi1: attaching mtd5
    ubi1: scanning is finished
    ubi1: attached mtd5 (name "reserve1", size 128 MiB)
    ubi1: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes
    ubi1: min./max. I/O unit sizes: 2048/2048, sub-page size 2048
    ubi1: VID header offset: 2048 (aligned 2048), data offset: 4096
    ubi1: good PEBs: 1020, bad PEBs: 4, corrupted PEBs: 0
    ubi1: user volume: 1, internal volumes: 1, max. volumes count: 128
    ubi1: max/mean erase counter: 458/166, WL threshold: 4096, image sequence number: 614900815
    ubi1: available PEBs: 0, total reserved PEBs: 1020, PEBs reserved for bad PEB handling: 36
    ubi1: background thread "ubi_bgt1d" started, PID 720
    UBIFS (ubi1:0): background thread "ubifs_bgt1_0" started, PID 723
    UBIFS (ubi1:0): UBIFS: mounted UBI device 1, volume 0, name "reserve1"
    UBIFS (ubi1:0): LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
    UBIFS (ubi1:0): FS size: 123039744 bytes (117 MiB, 969 LEBs), journal size 6221824 bytes (5 MiB, 49 LEBs)
    UBIFS (ubi1:0): reserved for root: 4952683 bytes (4836 KiB)
    UBIFS (ubi1:0): media format: w4/r0 (latest is w4/r0), UUID 91DF6B3D-1A99-4241-87C7-EB25097110C1, small LPT model
    IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
    IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
    macb e000b000.ethernet eth0: unable to generate target frequency: 25000000 Hz
    macb e000b000.ethernet eth0: link up (100/Full)
    IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
    In axi fpga driver!
    request_mem_region OK!
    AXI fpga dev virtual address is 0xcfb38000
    *base_vir_addr = 0xb023
    In fpga mem driver!
    request_mem_region OK!
    fpga mem virtual address is 0xd2000000
    random: nonblocking pool is initialized
    2021-03-10 13:18:24 driver-btm-api.c:486:init_freq_mode: This is scan-user version
    2021-03-10 13:18:24 driver-btm-api.c:1784:bitmain_soc_init: Miner compile time: Sat Nov 2 00:57:07 CST 2019 type: Antminer S17e
    2021-03-10 13:18:24 driver-btm-api.c:1785:bitmain_soc_init: commit version: 3658412 2019-11-01 22:33:08, build by: lol 2019-11-02 01:07:07
    2021-03-10 13:18:24 driver-btm-api.c:1786:bitmain_soc_init: opt_multi_version = 1
    2021-03-10 13:18:24 driver-btm-api.c:1787:bitmain_soc_init: opt_bitmain_ab = 1
    2021-03-10 13:18:24 driver-btm-api.c:1788:bitmain_soc_init: mid_auto_gen = 0
    2021-03-10 13:18:24 driver-btm-api.c:1789:bitmain_soc_init: opt_bitmain_work_mode = 0
    2021-03-10 13:18:24 driver-btm-api.c:1613:show_sn: no SN got, please write SN to /nvdata/sn
    2021-03-10 13:18:24 fan.c:248:front_fan_power_on: Note: front fan is power on!
    2021-03-10 13:18:24 fan.c:260:rear_fan_power_on: Note: rear fan is power on!
    2021-03-10 13:18:24 driver-btm-api.c:949:miner_device_init: Detect 256MB control board of XILINX
    2021-03-10 13:18:24 driver-btm-api.c:897:init_fan_parameter: fan_eft : 0 fan_pwm : 0
    2021-03-10 13:18:24 thread.c:705:create_read_nonce_reg_thread: create thread
    2021-03-10 13:18:30 driver-btm-api.c:881:init_miner_version: miner ID : 81322c481540885c
    2021-03-10 13:18:30 driver-btm-api.c:887:init_miner_version: FPGA Version = 0xB023
    2021-03-10 13:18:32 [chain 1]
    0x0000 96 13 01 00 59 44 46 54 59 48 36 41 49 41 41 4A
    0x0010 42 30 48 4A 45 00 00 00 28 01 00 01 01 01 01 04
    0x0020 04 41 42 5A 5A 5A 83 C3 96 13 52 5C 5C 56 56 5C
    0x0030 52 52 56 5C 56 52 5C 5C 56 52 52 56 52 5C 52 56
    0x0040 5C 52 56 56 5C 56 5C 56 52 52 56 52 5C 5C 52 52
    0x0050 5C 56 5C 56 52 56 5C 56 5C 52 56 5C 52 56 52 5C
    0x0060 56 52 5C 5C 56 5C 52 52 56 56 56 52 5C 5C 5C 56
    0x0070 52 52 56 56 52 5C 5C 56 52 5C 52 5C 52 52 52 5C
    0x0080 56 56 56 5C 5C 52 52 56 52 56 56 5C 5C 56 52 56
    0x0090 52 5C 5C 5C 56 52 56 5C 52 5C 52 5C 52 56 56 5C
    0x00A0 52 56 56 5C 52 52 56 5C 5C 52 56 52 5C 56 52 56
    0x00B0 5C 3A 07 56 57 00 00 00 00 01 00 FF FF FF FF FF
    0x00C0 FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
    0x00D0 FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
    0x00E0 FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
    0x00F0 FF FF FF FF FF FF FF FF FF FF FF FF FF FF 29 81

    2021-03-10 13:18:32 fixture_header : 0x1396
    2021-03-10 13:18:32 fixture_version : 0x0001
    2021-03-10 13:18:32 hash_board_sn : YDFTYH6AIAAJB0HJE
    2021-03-10 13:18:32 pcb_version : 0x0128
    2021-03-10 13:18:32 bom_version : 0x0100
    2021-03-10 13:18:32 product_id : 0x01
    2021-03-10 13:18:32 board_bin : 0x01
    2021-03-10 13:18:32
    2021-03-10 13:18:32 miner_header : 0x1396
    2021-03-10 13:18:32 work_mode_count : 0x01
    2021-03-10 13:18:32 miner_bin : 0x00
    2021-03-10 13:18:32 [mode 0]
    2021-03-10 13:18:32 voltage : 1850
    2021-03-10 13:18:32 ideal_hash_rate : 22358
    IC[000]:410 IC[001]:460 IC[002]:460 IC[003]:430 IC[004]:430 IC[005]:460 IC[006]:410 IC[007]:410 IC[008]:430
    IC[009]:460 IC[010]:430 IC[011]:410 IC[012]:460 IC[013]:460 IC[014]:430 IC[015]:410 IC[016]:410 IC[017]:430
    IC[018]:410 IC[019]:460 IC[020]:410 IC[021]:430 IC[022]:460 IC[023]:410 IC[024]:430 IC[025]:430 IC[026]:460
    IC[027]:430 IC[028]:460 IC[029]:430 IC[030]:410 IC[031]:410 IC[032]:430 IC[033]:410 IC[034]:460 IC[035]:460
    IC[036]:410 IC[037]:410 IC[038]:460 IC[039]:430 IC[040]:460 IC[041]:430 IC[042]:410 IC[043]:430 IC[044]:460
    IC[045]:430 IC[046]:460 IC[047]:410 IC[048]:430 IC[049]:460 IC[050]:410 IC[051]:430 IC[052]:410 IC[053]:460
    IC[054]:430 IC[055]:410 IC[056]:460 IC[057]:460 IC[058]:430 IC[059]:460 IC[060]:410 IC[061]:410 IC[062]:430
    IC[063]:430 IC[064]:430 IC[065]:410 IC[066]:460 IC[067]:460 IC[068]:460 IC[069]:430 IC[070]:410 IC[071]:410
    IC[072]:430 IC[073]:430 IC[074]:410 IC[075]:460 IC[076]:460 IC[077]:430 IC[078]:410 IC[079]:460 IC[080]:410
    IC[081]:460 IC[082]:410 IC[083]:410 IC[084]:410 IC[085]:460 IC[086]:430 IC[087]:430 IC[088]:430 IC[089]:460
    IC[090]:460 IC[091]:410 IC[092]:410 IC[093]:430 IC[094]:410 IC[095]:430 IC[096]:430 IC[097]:460 IC[098]:460
    IC[099]:430 IC[100]:410 IC[101]:430 IC[102]:410 IC[103]:460 IC[104]:460 IC[105]:460 IC[106]:430 IC[107]:410
    IC[108]:430 IC[109]:460 IC[110]:410 IC[111]:460 IC[112]:410 IC[113]:460 IC[114]:410 IC[115]:430 IC[116]:430
    IC[117]:460 IC[118]:410 IC[119]:430 IC[120]:430 IC[121]:460 IC[122]:410 IC[123]:410 IC[124]:430 IC[125]:460
    IC[126]:460 IC[127]:410 IC[128]:430 IC[129]:410 IC[130]:460 IC[131]:430 IC[132]:410 IC[133]:430 IC[134]:460
    2021-03-10 13:18:34 [chain 2]
    0x0000 96 13 01 00 59 44 46 54 59 48 36 41 49 41 41 4A
    0x0010 42 30 48 4D 44 00 00 00 28 01 00 01 01 01 01 04
    0x0020 04 41 42 5A 5A 5A 67 4B 96 13 52 52 54 54 54 54
    0x0030 54 52 54 54 54 54 52 52 52 54 54 54 54 54 52 52
    0x0040 52 54 54 54 54 54 54 52 52 54 54 52 54 54 54 54
    0x0050 52 54 54 54 52 52 54 54 54 52 54 52 52 54 54 54
    0x0060 52 54 52 54 54 54 52 54 54 54 52 54 54 54 54 54
    0x0070 52 52 52 54 54 54 54 54 54 52 52 54 54 52 54 54
    0x0080 52 54 54 52 52 52 54 54 54 52 54 54 54 52 54 54
    0x0090 52 52 54 54 54 54 52 54 54 54 54 52 52 54 54 54
    0x00A0 54 54 52 52 54 52 54 54 54 54 54 54 54 52 52 54
    0x00B0 52 3A 07 D0 53 00 00 00 00 01 00 FF FF FF FF FF
    0x00C0 FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
    0x00D0 FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
    0x00E0 FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
    0x00F0 FF FF FF FF FF FF FF FF FF FF FF FF FF FF 44 7C

    2021-03-10 13:18:34 fixture_header : 0x1396
    2021-03-10 13:18:34 fixture_version : 0x0001
    2021-03-10 13:18:34 hash_board_sn : YDFTYH6AIAAJB0HMD
    2021-03-10 13:18:34 pcb_version : 0x0128
    2021-03-10 13:18:34 bom_version : 0x0100
    2021-03-10 13:18:34 product_id : 0x01
    2021-03-10 13:18:34 board_bin : 0x01
    2021-03-10 13:18:34
    2021-03-10 13:18:34 miner_header : 0x1396
    2021-03-10 13:18:34 work_mode_count : 0x01
    2021-03-10 13:18:34 miner_bin : 0x00
    2021-03-10 13:18:34 [mode 0]
    2021-03-10 13:18:34 voltage : 1850
    2021-03-10 13:18:34 ideal_hash_rate : 21456
    IC[000]:410 IC[001]:410 IC[002]:420 IC[003]:420 IC[004]:420 IC[005]:420 IC[006]:420 IC[007]:410 IC[008]:420
    IC[009]:420 IC[010]:420 IC[011]:420 IC[012]:410 IC[013]:410 IC[014]:410 IC[015]:420 IC[016]:420 IC[017]:420
    IC[018]:420 IC[019]:420 IC[020]:410 IC[021]:410 IC[022]:410 IC[023]:420 IC[024]:420 IC[025]:420 IC[026]:420
    IC[027]:420 IC[028]:420 IC[029]:410 IC[030]:410 IC[031]:420 IC[032]:420 IC[033]:410 IC[034]:420 IC[035]:420
    IC[036]:420 IC[037]:420 IC[038]:410 IC[039]:420 IC[040]:420 IC[041]:420 IC[042]:410 IC[043]:410 IC[044]:420
    IC[045]:420 IC[046]:420 IC[047]:410 IC[048]:420 IC[049]:410 IC[050]:410 IC[051]:420 IC[052]:420 IC[053]:420
    IC[054]:410 IC[055]:420 IC[056]:410 IC[057]:420 IC[058]:420 IC[059]:420 IC[060]:410 IC[061]:420 IC[062]:420
    IC[063]:420 IC[064]:410 IC[065]:420 IC[066]:420 IC[067]:420 IC[068]:420 IC[069]:420 IC[070]:410 IC[071]:410
    IC[072]:410 IC[073]:420 IC[074]:420 IC[075]:420 IC[076]:420 IC[077]:420 IC[078]:420 IC[079]:410 IC[080]:410
    IC[081]:420 IC[082]:420 IC[083]:410 IC[084]:420 IC[085]:420 IC[086]:410 IC[087]:420 IC[088]:420 IC[089]:410
    IC[090]:410 IC[091]:410 IC[092]:420 IC[093]:420 IC[094]:420 IC[095]:410 IC[096]:420 IC[097]:420 IC[098]:420
    IC[099]:410 IC[100]:420 IC[101]:420 IC[102]:410 IC[103]:410 IC[104]:420 IC[105]:420 IC[106]:420 IC[107]:420
    IC[108]:410 IC[109]:420 IC[110]:420 IC[111]:420 IC[112]:420 IC[113]:410 IC[114]:410 IC[115]:420 IC[116]:420
    IC[117]:420 IC[118]:420 IC[119]:420 IC[120]:410 IC[121]:410 IC[122]:420 IC[123]:410 IC[124]:420 IC[125]:420
    IC[126]:420 IC[127]:420 IC[128]:420 IC[129]:420 IC[130]:420 IC[131]:410 IC[132]:410 IC[133]:420 IC[134]:410
    2021-03-10 13:18:34 driver-btm-api.c:522:get_product_id: product_id[1] = 1
    2021-03-10 13:18:34 driver-btm-api.c:522:get_product_id: product_id[2] = 1
    2021-03-10 13:18:34 driver-btm-api.c:502:dump_pcb_bom_version: Chain [1] PCB Version: 0x0128
    2021-03-10 13:18:34 driver-btm-api.c:503:dump_pcb_bom_version: Chain [1] BOM Version: 0x0100
    2021-03-10 13:18:34 driver-btm-api.c:502:dump_pcb_bom_version: Chain [2] PCB Version: 0x0128
    2021-03-10 13:18:34 driver-btm-api.c:503:dump_pcb_bom_version: Chain [2] BOM Version: 0x0100
    2021-03-10 13:18:40 driver-btm-api.c:1735:bitmain_board_init: Fan check passed.
    2021-03-10 13:18:41 board.c:48:jump_and_app_check_restore_pic: chain[1] PIC jump to app
    2021-03-10 13:18:43 board.c:60:jump_and_app_check_restore_pic: Check chain[1] PIC fw version=0xb9
    2021-03-10 13:18:44 board.c:48:jump_and_app_check_restore_pic: chain[2] PIC jump to app
    2021-03-10 13:18:46 board.c:60:jump_and_app_check_restore_pic: Check chain[2] PIC fw version=0xb9
    2021-03-10 13:18:46 thread.c:700:create_pic_heart_beat_thread: create thread
    2021-03-10 13:18:48 power_api.c:243:power_init: power type version: 0x0042
    2021-03-10 13:18:48 power_api.c:261:power_init: Power init:
    2021-03-10 13:18:48 power_api.c:262:power_init: current_voltage_raw = 0
    2021-03-10 13:18:48 power_api.c:263:power_init: highest_voltage_raw = 2000
    2021-03-10 13:18:48 power_api.c:264:power_init: working_voltage_raw = 2000
    2021-03-10 13:18:48 power_api.c:265:power_init: higher_voltage_raw = 1850
    2021-03-10 13:18:48 power_api.c:266:power_init: check_asic_voltage_raw = 1800
    2021-03-10 13:18:48 driver-btm-api.c:1745:bitmain_board_init: Enter 30s sleep to make sure power release finish.
    2021-03-10 13:18:48 power_api.c:231:power_off: init gpio907
    2021-03-10 13:19:20 power_api.c:318:set_to_check_asic_voltage: Set to voltage raw 1800, one step.
    2021-03-10 13:19:31 uart.c:69:set_baud: set UART baud to 115200
    2021-03-10 13:19:39 driver-btm-api.c:794:check_asic_number_with_power_on: Chain[1]: find 135 asic, times 0
    2021-03-10 13:19:46 driver-btm-api.c:794:check_asic_number_with_power_on: Chain[2]: find 0 asic, times 0
    2021-03-10 13:19:47 board.c:48:jump_and_app_check_restore_pic: chain[2] PIC jump to app
    2021-03-10 13:19:49 board.c:60:jump_and_app_check_restore_pic: Check chain[2] PIC fw version=0xb9
    2021-03-10 13:19:56 driver-btm-api.c:794:check_asic_number_with_power_on: Chain[2]: find 135 asic, times 1
    2021-03-10 13:19:56 power_api.c:336:set_to_highest_voltage_by_steps: Set to voltage raw 2000, step by step.
    2021-03-10 13:20:30 driver-hash-chip.c:433:set_uart_relay: set uart relay to 0x390003
    2021-03-10 13:20:31 driver-hash-chip.c:821:set_ldo_ctrl: Set LDO to 0x2000203
    2021-03-10 13:20:31 voltage[1] = 1850
    2021-03-10 13:20:31 voltage[2] = 1850
    2021-03-10 13:20:31 power_api.c:274:set_working_voltage_raw: working_voltage_raw = 1850
    2021-03-10 13:20:32 temperature.c:297:calibrate_temp_sensor_one_chain: chain 1 temp sensor NCT218
    2021-03-10 13:20:33 temperature.c:297:calibrate_temp_sensor_one_chain: chain 2 temp sensor NCT218
    2021-03-10 13:20:33 uart.c:69:set_baud: set UART baud to 12000000
    2021-03-10 13:20:35 driver-btm-api.c:228:check_bringup_temp: Bring up temperature is 7
    2021-03-10 13:20:35 thread.c:720:create_check_miner_status_thread: create thread
    2021-03-10 13:20:35 thread.c:710:create_show_miner_status_thread: create thread
    2021-03-10 13:20:35 thread.c:695:create_temperature_monitor_thread: create thread
    2021-03-10 13:20:35 sweep.c:960:sweep_get_max_freq: max_freq = 480
    2021-03-10 13:20:35 frequency.c:472:inc_freq_with_fixed_vco: chain = 255, freq = 410, is_higher_voltage = true
    2021-03-10 13:20:35 power_api.c:348:set_to_voltage_by_steps: Set to voltage raw 2100, step by step.
    2021-03-10 13:21:02 power_api.c:348:set_to_voltage_by_steps: Set to voltage raw 1980, step by step.
    2021-03-10 13:21:20 power_api.c:348:set_to_voltage_by_steps: Set to voltage raw 1950, step by step.
    2021-03-10 13:21:32 power_api.c:348:set_to_voltage_by_steps: Set to voltage raw 1920, step by step.
    2021-03-10 13:21:45 frequency.c:507:inc_freq_with_fixed_step: chain = 1, freq_start = 410, freq_end = 410, freq_step = 5, is_higher_voltage = true
    2021-03-10 13:21:45 frequency.c:507:inc_freq_with_fixed_step: chain = 2, freq_start = 410, freq_end = 410, freq_step = 5, is_higher_voltage = true
    2021-03-10 13:21:45 frequency.c:348:inc_asic_diff_freq_by_steps: chain = 1, start = 410, freq_step = 5
    2021-03-10 13:21:56 frequency.c:348:inc_asic_diff_freq_by_steps: chain = 2, start = 410, freq_step = 5
    2021-03-10 13:21:58 driver-btm-api.c:470:set_timeout: freq = 460, percent = 90, hcn = 235928, timeout = 512
    2021-03-10 13:21:58 power_api.c:280:set_higher_voltage_raw: higher_voltage_raw = 1950
    2021-03-10 13:21:58 power_api.c:342:set_to_higher_voltage_by_steps: Set to voltage raw 1950, step by step.
    2021-03-10 13:22:09 thread.c:715:create_check_system_status_thread: create thread
    2021-03-10 13:22:10 driver-btm-api.c:1894:bitmain_soc_init: Init done!
    2021-03-10 13:22:10 driver-btm-api.c:186:set_miner_status: STATUS_INIT
    2021-03-10 13:22:14 driver-btm-api.c:186:set_miner_status: STATUS_OKAY
    2021-03-10 13:22:15 frequency.c:161:get_ideal_hash_rate_GH: ideal_hash_rate = 43814
    2021-03-10 13:22:15 frequency.c:180:get_sale_hash_rate_GH: sale_hash_rate = 40000
    2021-03-10 13:22:18 driver-btm-api.c:1214:dhash_chip_send_job: Version num 8
    2021-03-10 13:22:22 thread.c:366:check_working_voltage: current PCB min temperature is 29
    2021-03-10 13:22:22 thread.c:367:check_working_voltage: current voltage is 1950, recovery to 1850
    2021-03-10 13:22:22 power_api.c:330:set_to_working_voltage_by_steps: Set to voltage raw 1850, step by step.
    2021-03-10 13:23:14 thread.c:543:check_temperature: over max temp, pcb temp 72 (max 85), chip temp 100(max 98) pcb temp rise 1 (max 13) chip temp rise 2 (max 15)
    2021-03-10 13:23:14 driver-btm-api.c:186:set_miner_status: ERROR_TEMP_TOO_HIGH
    2021-03-10 13:23:14 driver-btm-api.c:127:stop_mining: stop mining: over max temp
    2021-03-10 13:23:14 thread.c:740:cancel_temperature_monitor_thread: cancel thread
    2021-03-10 13:23:14 thread.c:761:cancel_check_system_status_thread: cancel thread
    2021-03-10 13:23:14 thread.c:750:cancel_read_nonce_reg_thread: cancel thread
    2021-03-10 13:23:14 driver-btm-api.c:112:killall_hashboard: ****power off hashboard****

    0
    Comment actions Permalink

    Hello!
    The log shows that the temperature is high, please check to clean up the dust of the arithmetic board and see if the heat sink has fallen off. If you want to use the previous firmware version, you need to use the SD card to restore the factory, and then upgrade the previous firmware version.

    https://service.bitmain.com/support/download?product=Flashing%20SD%20card%20with%20image

    0
    Comment actions Permalink

    I have already done a SD-reset and before that i tried two different firmware.

    I have done the clean up.

    3 heat sinks have fallen of on the card i doesn't use.

    I know that i have high temperatures, but way?

    Is it the controller that's not working properly?  

    All of this is already explained.

    //Oskar

    0
    Comment actions Permalink

    Hello!
    The board with the heat sink can be disconnected to the control board, but it needs to be plugged into the chassis and a heat dissipation channel needs to be formed to avoid excessive temperature burning in the chassis.

    0
    Comment actions Permalink

    Oskar Bengtsson i have the same problem with T17e > Did you find the solution ?

    0
    Comment actions Permalink

    Hi
    First of all check your hashboards if some of the coolingblocks have come loose or been dislocaded. Mine had bit i hade to replace The controllerboard approx 200 usd. Now is mine upp and rundning but i damage on hashboard and ate looking for a new or repair.

    0
    Comment actions Permalink

    I'm on my Phone so spelling is.... 🤪

    0
    Comment actions Permalink

    haha, i cant uderstand you, please write from your pc ! thank you my friend :)

    0
    Comment actions Permalink

Please sign in to leave a comment.