Bitman Antminer S17+ Chain problem

Like many S17+ owners, I have the Chain # 2 malfunction problem.

The problem happened when i restarted the asics.

I tried all the procedures to solve the problem, after installing the latest Bitmain S17+ driver there was one more chain missing as if it was a virus ...

I ask Bitmain for the solution, can you if I send back the Hashboard that does not work, provide me with news? the S17+ are no longer under warranty buy in October 2020 ...

The problem is serious and I am not the only one !!!

sorry for my English

Thx

Kernel Log

Booting Linux on physical CPU 0x0

Linux version 4.6.0-xilinx-gff8137b-dirty (lzq@armdev2) (gcc version 4.8.3 20140320 (prerelease) (Sourcery CodeBench Lite 2014.05-23) ) #25 SMP PREEMPT Fri Nov 23 15:30:52 CST 2018

CPU: ARMv7 Processor [413fc090] revision 0 (ARMv7), cr=18c5387d

CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache

Machine model: Xilinx Zynq

cma: Reserved 16 MiB at 0x0e000000

Memory policy: Data cache writealloc

On node 0 totalpages: 61440

free_area_init_node: node 0, pgdat c0b39280, node_mem_map cde10000

Normal zone: 480 pages used for memmap

Normal zone: 0 pages reserved

Normal zone: 61440 pages, LIFO batch:15

percpu: Embedded 12 pages/cpu @cddf1000 s19776 r8192 d21184 u49152

pcpu-alloc: s19776 r8192 d21184 u49152 alloc=12*4096

pcpu-alloc: [0] 0 [0] 1

Built 1 zonelists in Zone order, mobility grouping on. Total pages: 60960

Kernel command line: mem=240M console=ttyPS0,115200 ramdisk_size=33554432 root=/dev/ram rw earlyprintk

PID hash table entries: 1024 (order: 0, 4096 bytes)

Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)

Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)

Memory: 203432K/245760K available (6345K kernel code, 231K rwdata, 1896K rodata, 1024K init, 223K bss, 25944K reserved, 16384K cma-reserved, 0K highmem)

Virtual kernel memory layout:

vector : 0xffff0000 - 0xffff1000 ( 4 kB)

fixmap : 0xffc00000 - 0xfff00000 (3072 kB)

vmalloc : 0xcf800000 - 0xff800000 ( 768 MB)

lowmem : 0xc0000000 - 0xcf000000 ( 240 MB)

pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)

modules : 0xbf000000 - 0xbfe00000 ( 14 MB)

.text : 0xc0008000 - 0xc090c424 (9234 kB)

.init : 0xc0a00000 - 0xc0b00000 (1024 kB)

.data : 0xc0b00000 - 0xc0b39fe0 ( 232 kB)

.bss : 0xc0b39fe0 - 0xc0b71c28 ( 224 kB)

Preemptible hierarchical RCU implementation.

Build-time adjustment of leaf fanout to 32.

RCU restricting CPUs from NR_CPUS=4 to nr_cpu_ids=2.

RCU: Adjusting geometry for rcu_fanout_leaf=32, nr_cpu_ids=2

NR_IRQS:16 nr_irqs:16 16

efuse mapped to cf800000

ps7-slcr mapped to cf802000

L2C: platform modifies aux control register: 0x72360000 -> 0x72760000

L2C: DT/platform modifies aux control register: 0x72360000 -> 0x72760000

L2C-310 erratum 769419 enabled

L2C-310 enabling early BRESP for Cortex-A9

L2C-310 full line of zeros enabled for Cortex-A9

L2C-310 ID prefetch enabled, offset 1 lines

L2C-310 dynamic clock gating enabled, standby mode enabled

L2C-310 cache controller enabled, 8 ways, 512 kB

L2C-310: CACHE_ID 0x410000c8, AUX_CTRL 0x76760001

zynq_clock_init: clkc starts at cf802100

Zynq clock init

sched_clock: 64 bits at 333MHz, resolution 3ns, wraps every 4398046511103ns

clocksource: arm_global_timer: mask: 0xffffffffffffffff max_cycles: 0x4ce07af025, max_idle_ns: 440795209040 ns

Switching to timer-based delay loop, resolution 3ns

clocksource: ttc_clocksource: mask: 0xffff max_cycles: 0xffff, max_idle_ns: 537538477 ns

ps7-ttc #0 at cf80a000, irq=18

Console: colour dummy device 80x30

Calibrating delay loop (skipped), value calculated using timer frequency.. 666.66 BogoMIPS (lpj=3333333)

pid_max: default: 32768 minimum: 301

Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)

Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)

CPU: Testing write buffer coherency: ok

CPU0: thread -1, cpu 0, socket 0, mpidr 80000000

Setting up static identity map for 0x100000 - 0x100058

CPU1: failed to boot: -1

Brought up 1 CPUs

SMP: Total of 1 processors activated (666.66 BogoMIPS).

CPU: All CPU(s) started in SVC mode.

devtmpfs: initialized

VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 4

clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns

pinctrl core: initialized pinctrl subsystem

NET: Registered protocol family 16

DMA: preallocated 256 KiB pool for atomic coherent allocations

cpuidle: using governor menu

hw-breakpoint: found 5 (+1 reserved) breakpoint and 1 watchpoint registers.

hw-breakpoint: maximum watchpoint size is 4 bytes.

zynq-ocm f800c000.ps7-ocmc: ZYNQ OCM pool: 256 KiB @ 0xcf880000

vgaarb: loaded

SCSI subsystem initialized

usbcore: registered new interface driver usbfs

usbcore: registered new interface driver hub

usbcore: registered new device driver usb

media: Linux media interface: v0.10

Linux video capture interface: v2.00

pps_core: LinuxPPS API ver. 1 registered

PTP clock support registered

EDAC MC: Ver: 3.0.0

Advanced Linux Sound Architecture Driver Initialized.

clocksource: Switched to clocksource arm_global_timer

NET: Registered protocol family 2

TCP established hash table entries: 2048 (order: 1, 8192 bytes)

TCP bind hash table entries: 2048 (order: 2, 16384 bytes)

TCP: Hash tables configured (established 2048 bind 2048)

UDP hash table entries: 256 (order: 1, 8192 bytes)

UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)

NET: Registered protocol family 1

RPC: Registered named UNIX socket transport module.

RPC: Registered udp transport module.

RPC: Registered tcp transport module.

RPC: Registered tcp NFSv4.1 backchannel transport module.

PCI: CLS 0 bytes, default 64

Trying to unpack rootfs image as initramfs...

rootfs image is not initramfs (no cpio magic); looks like an initrd

Freeing initrd memory: 12904K (cce67000 - cdb01000)

hw perfevents: enabled with armv7_cortex_a9 PMU driver, 7 counters available

futex hash table entries: 512 (order: 3, 32768 bytes)

workingset: timestamp_bits=28 max_order=16 bucket_order=0

io scheduler noop registered

io scheduler deadline registered

io scheduler cfq registered (default)

dma-pl330 f8003000.ps7-dma: Loaded driver for PL330 DMAC-241330

dma-pl330 f8003000.ps7-dma: DBUFF-128x8bytes Num_Chans-8 Num_Peri-4 Num_Events-16

e0000000.serial: ttyPS0 at MMIO 0xe0000000 (irq = 158, base_baud = 6249999) is a xuartps

console [ttyPS0] enabled

xdevcfg f8007000.ps7-dev-cfg: ioremap 0xf8007000 to cf86e000

[drm] Initialized drm 1.1.0 20060810

brd: module loaded

loop: module loaded

CAN device driver interface

gpiod_set_value: invalid GPIO

libphy: MACB_mii_bus: probed

macb e000b000.ethernet eth0: Cadence GEM rev 0x00020118 at 0xe000b000 irq 31 (00:0a:35:00:00:00)

Generic PHY e000b000.etherne:00: attached PHY driver [Generic PHY] (mii_bus:phy_addr=e000b000.etherne:00, irq=-1)

e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k

ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver

ehci-pci: EHCI PCI platform driver

usbcore: registered new interface driver usb-storage

mousedev: PS/2 mouse device common for all mice

i2c /dev entries driver

Xilinx Zynq CpuIdle Driver started

sdhci: Secure Digital Host Controller Interface driver

sdhci: Copyright(c) Pierre Ossman

sdhci-pltfm: SDHCI platform and OF driver helper

mmc0: SDHCI controller on e0100000.ps7-sdio [e0100000.ps7-sdio] using ADMA

ledtrig-cpu: registered to indicate activity on CPUs

usbcore: registered new interface driver usbhid

usbhid: USB HID core driver

nand: device found, Manufacturer ID: 0xc2, Chip ID: 0xda

nand: Macronix MX30LF2GE8AB

nand: 256 MiB, SLC, erase size: 128 KiB, page size: 2048, OOB size: 64

Bad block table found at page 131008, version 0x01

Bad block table found at page 130944, version 0x01

nand_read_bbt: bad block at 0x00000ff60000

nand_read_bbt: bad block at 0x00000ff80000

nand_read_bbt: bad block at 0x00000ffa0000

nand_read_bbt: bad block at 0x00000ffc0000

6 ofpart partitions found on MTD device pl35x-nand

Creating 6 MTD partitions on "pl35x-nand":

0x000000000000-0x000002800000 : "BOOT.bin-env-dts-kernel"

0x000002800000-0x000004800000 : "ramfs"

0x000004800000-0x000005000000 : "configs"

0x000005000000-0x000006000000 : "reserve"

0x000006000000-0x000008000000 : "ramfs-bak"

0x000008000000-0x000010000000 : "reserve1"

NET: Registered protocol family 10

sit: IPv6 over IPv4 tunneling driver

NET: Registered protocol family 17

can: controller area network core (rev 20120528 abi 9)

NET: Registered protocol family 29

can: raw protocol (rev 20120528)

can: broadcast manager protocol (rev 20120528 t)

can: netlink gateway (rev 20130117) max_hops=1

zynq_pm_ioremap: no compatible node found for 'xlnx,zynq-ddrc-a05'

zynq_pm_late_init: Unable to map DDRC IO memory.

Registering SWP/SWPB emulation handler

hctosys: unable to open rtc device (rtc0)

ALSA device list:

No soundcards found.

RAMDISK: gzip image found at block 0

EXT4-fs (ram0): couldn't mount as ext3 due to feature incompatibilities

EXT4-fs (ram0): mounted filesystem without journal. Opts: (null)

VFS: Mounted root (ext4 filesystem) on device 1:0.

devtmpfs: mounted

Freeing unused kernel memory: 1024K (c0a00000 - c0b00000)

EXT4-fs (ram0): re-mounted. Opts: block_validity,delalloc,barrier,user_xattr

random: dd urandom read with 0 bits of entropy available

ubi0: attaching mtd2

ubi0: scanning is finished

ubi0: attached mtd2 (name "configs", size 8 MiB)

ubi0: PEB size: 131072 bytes (128 KiB), LEB size: 129024 bytes

ubi0: min./max. I/O unit sizes: 2048/2048, sub-page size 512

ubi0: VID header offset: 512 (aligned 512), data offset: 2048

ubi0: good PEBs: 64, bad PEBs: 0, corrupted PEBs: 0

ubi0: user volume: 1, internal volumes: 1, max. volumes count: 128

ubi0: max/mean erase counter: 190/130, WL threshold: 4096, image sequence number: 1567270514

ubi0: available PEBs: 0, total reserved PEBs: 64, PEBs reserved for bad PEB handling: 40

ubi0: background thread "ubi_bgt0d" started, PID 708

UBIFS (ubi0:0): background thread "ubifs_bgt0_0" started, PID 711

UBIFS (ubi0:0): UBIFS: mounted UBI device 0, volume 0, name "configs"

UBIFS (ubi0:0): LEB size: 129024 bytes (126 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes

UBIFS (ubi0:0): FS size: 1419264 bytes (1 MiB, 11 LEBs), journal size 903169 bytes (0 MiB, 5 LEBs)

UBIFS (ubi0:0): reserved for root: 67035 bytes (65 KiB)

UBIFS (ubi0:0): media format: w4/r0 (latest is w4/r0), UUID 47B540C7-9D9A-47A8-BA37-D4081EFEDE2D, small LPT model

ubi1: attaching mtd5

ubi1: scanning is finished

ubi1: attached mtd5 (name "reserve1", size 128 MiB)

ubi1: PEB size: 131072 bytes (128 KiB), LEB size: 129024 bytes

ubi1: min./max. I/O unit sizes: 2048/2048, sub-page size 512

ubi1: VID header offset: 512 (aligned 512), data offset: 2048

ubi1: good PEBs: 1019, bad PEBs: 5, corrupted PEBs: 0

ubi1: user volume: 1, internal volumes: 1, max. volumes count: 128

ubi1: max/mean erase counter: 150/37, WL threshold: 4096, image sequence number: 1198263195

ubi1: available PEBs: 0, total reserved PEBs: 1019, PEBs reserved for bad PEB handling: 35

ubi1: background thread "ubi_bgt1d" started, PID 720

UBIFS (ubi1:0): background thread "ubifs_bgt1_0" started, PID 723

UBIFS (ubi1:0): UBIFS: mounted UBI device 1, volume 0, name "reserve1"

UBIFS (ubi1:0): LEB size: 129024 bytes (126 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes

UBIFS (ubi1:0): FS size: 125024256 bytes (119 MiB, 969 LEBs), journal size 6322176 bytes (6 MiB, 49 LEBs)

UBIFS (ubi1:0): reserved for root: 4952683 bytes (4836 KiB)

UBIFS (ubi1:0): media format: w4/r0 (latest is w4/r0), UUID 8D25A753-B1E6-461F-BA97-EE4B6F2054F5, small LPT model

IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready

macb e000b000.ethernet eth0: unable to generate target frequency: 25000000 Hz

macb e000b000.ethernet eth0: link up (100/Full)

IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready

In axi fpga driver!

request_mem_region OK!

AXI fpga dev virtual address is 0xcfb40000

*base_vir_addr = 0xb023

In fpga mem driver!

request_mem_region OK!

fpga mem virtual address is 0xd2000000

random: nonblocking pool is initialized

2021-02-08 07:18:16 driver-btm-api.c:779:init_freq_mode: This is scan-user version

2021-02-08 07:18:16 driver-btm-api.c:2451:bitmain_soc_init: opt_multi_version = 1

2021-02-08 07:18:16 driver-btm-api.c:2452:bitmain_soc_init: opt_bitmain_ab = 1

2021-02-08 07:18:16 driver-btm-api.c:2453:bitmain_soc_init: opt_bitmain_work_mode = 0

2021-02-08 07:18:16 driver-btm-api.c:2454:bitmain_soc_init: Miner compile time: Tue Jun 2 10:31:07 CST 2020 type: Antminer S17+

2021-02-08 07:18:16 driver-btm-api.c:2455:bitmain_soc_init: commit version: 1ca50a5 2020-06-01 18:51:22, build by: lol 2020-06-02 10:37:21

2021-02-08 07:18:16 driver-btm-api.c:2083:show_sn: len:16, 80142c4679104814

2021-02-08 07:18:16 driver-btm-api.c:2461:bitmain_soc_init: show sn return 1

2021-02-08 07:18:16 driver-btm-api.c:2103:handle_sn_for_factory_mode: show sn return 1

2021-02-08 07:18:16 driver-btm-api.c:2141:handle_sn_for_factory_mode: read sn success, 80142c4679104814

2021-02-08 07:18:16 fan.c:284:front_fan_power_on: Note: front fan is power on!

2021-02-08 07:18:16 fan.c:296:rear_fan_power_on: Note: rear fan is power on!

2021-02-08 07:18:16 driver-btm-api.c:1314:miner_device_init: Detect 256MB control board of XILINX

2021-02-08 07:18:16 driver-btm-api.c:1255:init_fan_parameter: fan_eft : 0 fan_pwm : 0

2021-02-08 07:18:22 driver-btm-api.c:1239:init_miner_version: miner ID : 80142c4679104814

2021-02-08 07:18:22 driver-btm-api.c:1245:init_miner_version: FPGA Version = 0xB023

2021-02-08 07:18:28 driver-btm-api.c:837:get_product_id: product_id[0] = 0

2021-02-08 07:18:28 driver-btm-api.c:837:get_product_id: product_id[1] = 0

2021-02-08 07:18:28 driver-btm-api.c:837:get_product_id: product_id[2] = 0

2021-02-08 07:18:28 driver-btm-api.c:2234:update_conf_by_power_feedback: Power feedback is disabled

2021-02-08 07:18:28 driver-btm-api.c:2202:get_calibration_voltage: calibration voltage flag is error data.

2021-02-08 07:18:28 driver-btm-api.c:2268:update_conf_by_power_feedback: Note: no calibration voltage, default diff = 0

2021-02-08 07:18:28 frequency.c:1457:adjust_higer_max_vol_table: adjust_higer_max_vol_table, adjust_vol = 0

2021-02-08 07:18:28 thread.c:1363:create_read_nonce_reg_thread: create thread

2021-02-08 07:18:34 driver-btm-api.c:1239:init_miner_version: miner ID : 80142c4679104814

2021-02-08 07:18:34 driver-btm-api.c:1245:init_miner_version: FPGA Version = 0xB023

2021-02-08 07:18:39 driver-btm-api.c:837:get_product_id: product_id[0] = 0

2021-02-08 07:18:39 driver-btm-api.c:837:get_product_id: product_id[1] = 0

2021-02-08 07:18:39 driver-btm-api.c:837:get_product_id: product_id[2] = 0

2021-02-08 07:18:39 driver-btm-api.c:792:_set_project_type: project:0

2021-02-08 07:18:39 driver-btm-api.c:813:_set_project_type: Project type: Antminer S17+

2021-02-08 07:18:39 driver-btm-api.c:824:dump_pcb_bom_version: Chain [0] PCB Version: 0x0100

2021-02-08 07:18:39 driver-btm-api.c:825:dump_pcb_bom_version: Chain [0] BOM Version: 0x0100

2021-02-08 07:18:39 driver-btm-api.c:824:dump_pcb_bom_version: Chain [1] PCB Version: 0x0100

2021-02-08 07:18:39 driver-btm-api.c:825:dump_pcb_bom_version: Chain [1] BOM Version: 0x0100

2021-02-08 07:18:39 driver-btm-api.c:824:dump_pcb_bom_version: Chain [2] PCB Version: 0x0100

2021-02-08 07:18:39 driver-btm-api.c:825:dump_pcb_bom_version: Chain [2] BOM Version: 0x0100

2021-02-08 07:18:41 driver-btm-api.c:2372:bitmain_board_init: Fan check passed.

2021-02-08 07:18:42 board.c:36:jump_and_app_check_restore_pic: chain[0] PIC jump to app

2021-02-08 07:18:44 board.c:40:jump_and_app_check_restore_pic: Check chain[0] PIC fw version=0x88

2021-02-08 07:18:45 board.c:36:jump_and_app_check_restore_pic: chain[1] PIC jump to app

2021-02-08 07:18:47 board.c:40:jump_and_app_check_restore_pic: Check chain[1] PIC fw version=0x88

2021-02-08 07:18:48 board.c:36:jump_and_app_check_restore_pic: chain[2] PIC jump to app

2021-02-08 07:18:50 board.c:40:jump_and_app_check_restore_pic: Check chain[2] PIC fw version=0x88

2021-02-08 07:18:50 thread.c:1358:create_pic_heart_beat_thread: create thread

2021-02-08 07:18:50 power_api.c:213:power_init: Power init:

2021-02-08 07:18:50 power_api.c:214:power_init: current_voltage_raw = 0

2021-02-08 07:18:50 power_api.c:215:power_init: highest_voltage_raw = 2100

2021-02-08 07:18:50 power_api.c:216:power_init: working_voltage_raw = 1950

2021-02-08 07:18:50 power_api.c:217:power_init: higher_voltage_raw = 2040

2021-02-08 07:18:50 power_api.c:218:power_init: check_asic_voltage_raw = 2100

2021-02-08 07:18:50 driver-btm-api.c:2382:bitmain_board_init: Enter 30s sleep to make sure power release finish.

2021-02-08 07:19:22 power_api.c:324:set_to_highest_voltage_by_steps: Set to voltage raw 2100, step by step.

2021-02-08 07:19:48 power_api.c:85:check_voltage_multi: retry time: 0

2021-02-08 07:19:49 power_api.c:40:_get_avg_voltage: chain = 0, voltage = 21.043533

2021-02-08 07:19:50 power_api.c:40:_get_avg_voltage: chain = 1, voltage = 20.970549

2021-02-08 07:19:51 power_api.c:40:_get_avg_voltage: chain = 2, voltage = 20.965516

2021-02-08 07:19:51 power_api.c:53:_get_avg_voltage: average_voltage = 20.993199

2021-02-08 07:19:51 power_api.c:71:check_voltage: target_vol = 21.00, actural_vol = 20.99, check voltage passed.

2021-02-08 07:19:51 uart.c:72:set_baud: set fpga_baud to 115200

2021-02-08 07:20:02 driver-btm-api.c:1134:check_asic_number_with_power_on: Chain[0]: find 0 asic, times 0

2021-02-08 07:20:13 driver-btm-api.c:1134:check_asic_number_with_power_on: Chain[0]: find 0 asic, times 1

2021-02-08 07:20:24 driver-btm-api.c:1134:check_asic_number_with_power_on: Chain[0]: find 0 asic, times 2

2021-02-08 07:20:24 power_api.c:380:modify_check_asic_voltage: check_asic_voltage_raw = 2100

chain 0, IO_DRIVE_STRENGTH_CONFIGURATION reg = 0x f1fffff

2021-02-08 07:20:33 driver-btm-api.c:1157:check_asic_number_with_power_on: Chain[0]: find 0 asic, times 3

2021-02-08 07:20:33 power_api.c:380:modify_check_asic_voltage: check_asic_voltage_raw = 2050

2021-02-08 07:20:33 power_api.c:364:set_to_check_asic_voltage_by_steps: Set to voltage raw 2050, step by step.

2021-02-08 07:20:36 power_api.c:85:check_voltage_multi: retry time: 0

2021-02-08 07:20:38 power_api.c:40:_get_avg_voltage: chain = 0, voltage = 20.482097

2021-02-08 07:20:39 power_api.c:40:_get_avg_voltage: chain = 1, voltage = 20.485898

2021-02-08 07:20:40 power_api.c:40:_get_avg_voltage: chain = 2, voltage = 20.455937

2021-02-08 07:20:40 power_api.c:53:_get_avg_voltage: average_voltage = 20.474644

2021-02-08 07:20:40 power_api.c:71:check_voltage: target_vol = 20.50, actural_vol = 20.47, check voltage passed.

chain 0, IO_DRIVE_STRENGTH_CONFIGURATION reg = 0x f1fffff

2021-02-08 07:20:49 driver-btm-api.c:1157:check_asic_number_with_power_on: Chain[0]: find 0 asic, times 4

2021-02-08 07:20:49 power_api.c:380:modify_check_asic_voltage: check_asic_voltage_raw = 2000

2021-02-08 07:20:49 power_api.c:364:set_to_check_asic_voltage_by_steps: Set to voltage raw 2000, step by step.

2021-02-08 07:20:52 power_api.c:85:check_voltage_multi: retry time: 0

2021-02-08 07:20:54 power_api.c:40:_get_avg_voltage: chain = 0, voltage = 20.020460

2021-02-08 07:20:55 power_api.c:40:_get_avg_voltage: chain = 1, voltage = 19.998718

2021-02-08 07:20:56 power_api.c:40:_get_avg_voltage: chain = 2, voltage = 19.970624

2021-02-08 07:20:56 power_api.c:53:_get_avg_voltage: average_voltage = 19.996601

2021-02-08 07:20:56 power_api.c:71:check_voltage: target_vol = 20.00, actural_vol = 20.00, check voltage passed.

chain 0, IO_DRIVE_STRENGTH_CONFIGURATION reg = 0x f1fffff

2021-02-08 07:21:04 driver-btm-api.c:1157:check_asic_number_with_power_on: Chain[0]: find 0 asic, times 5

2021-02-08 07:21:04 power_api.c:380:modify_check_asic_voltage: check_asic_voltage_raw = 2100

2021-02-08 07:21:04 power_api.c:364:set_to_check_asic_voltage_by_steps: Set to voltage raw 2100, step by step.

2021-02-08 07:21:10 power_api.c:85:check_voltage_multi: retry time: 0

2021-02-08 07:21:11 power_api.c:40:_get_avg_voltage: chain = 0, voltage = 21.019205

2021-02-08 07:21:12 power_api.c:40:_get_avg_voltage: chain = 1, voltage = 20.946222

2021-02-08 07:21:13 power_api.c:40:_get_avg_voltage: chain = 2, voltage = 20.941250

2021-02-08 07:21:13 power_api.c:53:_get_avg_voltage: average_voltage = 20.968892

2021-02-08 07:21:13 power_api.c:71:check_voltage: target_vol = 21.00, actural_vol = 20.97, check voltage passed.

2021-02-08 07:21:13 driver-btm-api.c:1193:check_asic_number: Chain 0 only find 0 asic, will power off hash board 0

2021-02-08 07:21:14 driver-btm-api.c:1195:check_asic_number: Chain 0 voltage: an0 = 2.777419, an2 2.783871, an6 2.519355.

2021-02-08 07:21:26 driver-btm-api.c:1134:check_asic_number_with_power_on: Chain[1]: find 65 asic, times 0

2021-02-08 07:21:38 driver-btm-api.c:1134:check_asic_number_with_power_on: Chain[2]: find 0 asic, times 0

2021-02-08 07:21:49 driver-btm-api.c:1134:check_asic_number_with_power_on: Chain[2]: find 0 asic, times 1

2021-02-08 07:21:59 driver-btm-api.c:1134:check_asic_number_with_power_on: Chain[2]: find 0 asic, times 2

2021-02-08 07:21:59 power_api.c:380:modify_check_asic_voltage: check_asic_voltage_raw = 2100

chain 2, IO_DRIVE_STRENGTH_CONFIGURATION reg = 0x f1fffff

2021-02-08 07:22:08 driver-btm-api.c:1157:check_asic_number_with_power_on: Chain[2]: find 0 asic, times 3

2021-02-08 07:22:08 power_api.c:380:modify_check_asic_voltage: check_asic_voltage_raw = 2050

2021-02-08 07:22:08 power_api.c:364:set_to_check_asic_voltage_by_steps: Set to voltage raw 2050, step by step.

2021-02-08 07:22:11 power_api.c:85:check_voltage_multi: retry time: 0

2021-02-08 07:22:12 power_api.c:40:_get_avg_voltage: chain = 1, voltage = 20.459666

2021-02-08 07:22:14 power_api.c:40:_get_avg_voltage: chain = 2, voltage = 20.429847

2021-02-08 07:22:14 power_api.c:53:_get_avg_voltage: average_voltage = 20.444756

2021-02-08 07:22:14 power_api.c:71:check_voltage: target_vol = 20.50, actural_vol = 20.44, check voltage passed.

chain 2, IO_DRIVE_STRENGTH_CONFIGURATION reg = 0x f1fffff

2021-02-08 07:22:22 driver-btm-api.c:1157:check_asic_number_with_power_on: Chain[2]: find 0 asic, times 4

2021-02-08 07:22:22 power_api.c:380:modify_check_asic_voltage: check_asic_voltage_raw = 2000

2021-02-08 07:22:22 power_api.c:364:set_to_check_asic_voltage_by_steps: Set to voltage raw 2000, step by step.

2021-02-08 07:22:26 power_api.c:85:check_voltage_multi: retry time: 0

2021-02-08 07:22:27 power_api.c:40:_get_avg_voltage: chain = 1, voltage = 19.973110

2021-02-08 07:22:28 power_api.c:40:_get_avg_voltage: chain = 2, voltage = 19.920918

2021-02-08 07:22:28 power_api.c:53:_get_avg_voltage: average_voltage = 19.947014

2021-02-08 07:22:28 power_api.c:71:check_voltage: target_vol = 20.00, actural_vol = 19.95, check voltage passed.

chain 2, IO_DRIVE_STRENGTH_CONFIGURATION reg = 0x f1fffff

2021-02-08 07:22:36 driver-btm-api.c:1157:check_asic_number_with_power_on: Chain[2]: find 0 asic, times 5

2021-02-08 07:22:36 power_api.c:380:modify_check_asic_voltage: check_asic_voltage_raw = 2100

2021-02-08 07:22:36 power_api.c:364:set_to_check_asic_voltage_by_steps: Set to voltage raw 2100, step by step.

2021-02-08 07:22:42 power_api.c:85:check_voltage_multi: retry time: 0

2021-02-08 07:22:43 power_api.c:40:_get_avg_voltage: chain = 1, voltage = 20.946222

2021-02-08 07:22:44 power_api.c:40:_get_avg_voltage: chain = 2, voltage = 20.914540

2021-02-08 07:22:44 power_api.c:53:_get_avg_voltage: average_voltage = 20.930381

2021-02-08 07:22:44 power_api.c:71:check_voltage: target_vol = 21.00, actural_vol = 20.93, check voltage passed.

2021-02-08 07:22:44 driver-btm-api.c:1193:check_asic_number: Chain 2 only find 0 asic, will power off hash board 2

2021-02-08 07:22:45 driver-btm-api.c:1195:check_asic_number: Chain 2 voltage: an0 = 2.780645, an2 2.783871, an6 2.529032.

2021-02-08 07:22:49 driver-hash-chip.c:266:set_uart_relay: set uart relay to 0x330003

2021-02-08 07:22:49 driver-btm-api.c:435:set_order_clock: chain[1]: set order clock, stragegy 3

2021-02-08 07:22:49 driver-hash-chip.c:502:set_clock_delay_control: core_data = 0x34

2021-02-08 07:22:49 driver-btm-api.c:1892:check_clock_counter: freq 50 clock_counter_limit 6

2021-02-08 07:22:49 voltage[1] = 1940

2021-02-08 07:22:49 power_api.c:226:set_working_voltage_raw: working_voltage_raw = 1940

2021-02-08 07:22:50 temperature.c:340:calibrate_temp_sensor_one_chain: chain 1 temp sensor TMP451

2021-02-08 07:22:50 uart.c:72:set_baud: set fpga_baud to 12000000

2021-02-08 07:22:51 driver-btm-api.c:293:check_bringup_temp: Bring up temperature is 21

2021-02-08 07:22:51 thread.c:1378:create_check_miner_status_thread: create thread

2021-02-08 07:22:51 thread.c:1368:create_show_miner_status_thread: create thread

2021-02-08 07:22:51 thread.c:1348:create_temperature_monitor_thread: create thread

2021-02-08 07:22:51 frequency.c:514:check_bringup_temp_dec_freq: dec freq = 0 when bringup temp = 21 dec_freq_index=0

2021-02-08 07:22:51 freq_tuning.c:183:freq_tuning_get_max_freq: Max freq of tuning is 650

2021-02-08 07:22:51 driver-btm-api.c:1765:send_null_work: [DEBUG] Send null work.

2021-02-08 07:22:51 thread.c:1338:create_asic_status_monitor_thread: create thread

2021-02-08 07:22:51 frequency.c:1110:inc_freq_with_fixed_vco: chain = 255, freq = 540, is_higher_voltage = true

Bitman Antminer S17+ Chain problem

Comments

Didn't find what you were looking for?