s17+ 73 th not working
Hey just need some help i have no idea whats going on the light just blinks red on the miner, can any one with a little bit of knowledge on this kernel log explain to me thank you.
Booting Linux on physical CPU 0x0
Linux version 4.6.0-xilinx-gff8137b-dirty (lzq@armdev2) (gcc version 4.8.3 20140320 (prerelease) (Sourcery CodeBench Lite 2014.05-23) ) #25 SMP PREEMPT Fri Nov 23 15:30:52 CST 2018
CPU: ARMv7 Processor [413fc090] revision 0 (ARMv7), cr=18c5387d
CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
Machine model: Xilinx Zynq
cma: Reserved 16 MiB at 0x0e000000
Memory policy: Data cache writealloc
On node 0 totalpages: 61440
free_area_init_node: node 0, pgdat c0b39280, node_mem_map cde10000
Normal zone: 480 pages used for memmap
Normal zone: 0 pages reserved
Normal zone: 61440 pages, LIFO batch:15
percpu: Embedded 12 pages/cpu @cddf1000 s19776 r8192 d21184 u49152
pcpu-alloc: s19776 r8192 d21184 u49152 alloc=12*4096
pcpu-alloc: [0] 0 [0] 1
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 60960
Kernel command line: mem=240M console=ttyPS0,115200 ramdisk_size=33554432 root=/dev/ram rw earlyprintk
PID hash table entries: 1024 (order: 0, 4096 bytes)
Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
Memory: 203432K/245760K available (6345K kernel code, 231K rwdata, 1896K rodata, 1024K init, 223K bss, 25944K reserved, 16384K cma-reserved, 0K highmem)
Virtual kernel memory layout:
vector : 0xffff0000 - 0xffff1000 ( 4 kB)
fixmap : 0xffc00000 - 0xfff00000 (3072 kB)
vmalloc : 0xcf800000 - 0xff800000 ( 768 MB)
lowmem : 0xc0000000 - 0xcf000000 ( 240 MB)
pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
modules : 0xbf000000 - 0xbfe00000 ( 14 MB)
.text : 0xc0008000 - 0xc090c424 (9234 kB)
.init : 0xc0a00000 - 0xc0b00000 (1024 kB)
.data : 0xc0b00000 - 0xc0b39fe0 ( 232 kB)
.bss : 0xc0b39fe0 - 0xc0b71c28 ( 224 kB)
Preemptible hierarchical RCU implementation.
Build-time adjustment of leaf fanout to 32.
RCU restricting CPUs from NR_CPUS=4 to nr_cpu_ids=2.
RCU: Adjusting geometry for rcu_fanout_leaf=32, nr_cpu_ids=2
NR_IRQS:16 nr_irqs:16 16
efuse mapped to cf800000
ps7-slcr mapped to cf802000
L2C: platform modifies aux control register: 0x72360000 -> 0x72760000
L2C: DT/platform modifies aux control register: 0x72360000 -> 0x72760000
L2C-310 erratum 769419 enabled
L2C-310 enabling early BRESP for Cortex-A9
L2C-310 full line of zeros enabled for Cortex-A9
L2C-310 ID prefetch enabled, offset 1 lines
L2C-310 dynamic clock gating enabled, standby mode enabled
L2C-310 cache controller enabled, 8 ways, 512 kB
L2C-310: CACHE_ID 0x410000c8, AUX_CTRL 0x76760001
zynq_clock_init: clkc starts at cf802100
Zynq clock init
sched_clock: 64 bits at 333MHz, resolution 3ns, wraps every 4398046511103ns
clocksource: arm_global_timer: mask: 0xffffffffffffffff max_cycles: 0x4ce07af025, max_idle_ns: 440795209040 ns
Switching to timer-based delay loop, resolution 3ns
clocksource: ttc_clocksource: mask: 0xffff max_cycles: 0xffff, max_idle_ns: 537538477 ns
ps7-ttc #0 at cf80a000, irq=18
Console: colour dummy device 80x30
Calibrating delay loop (skipped), value calculated using timer frequency.. 666.66 BogoMIPS (lpj=3333333)
pid_max: default: 32768 minimum: 301
Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
CPU: Testing write buffer coherency: ok
CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
Setting up static identity map for 0x100000 - 0x100058
CPU1: failed to boot: -1
Brought up 1 CPUs
SMP: Total of 1 processors activated (666.66 BogoMIPS).
CPU: All CPU(s) started in SVC mode.
devtmpfs: initialized
VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 4
clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
pinctrl core: initialized pinctrl subsystem
NET: Registered protocol family 16
DMA: preallocated 256 KiB pool for atomic coherent allocations
cpuidle: using governor menu
hw-breakpoint: found 5 (+1 reserved) breakpoint and 1 watchpoint registers.
hw-breakpoint: maximum watchpoint size is 4 bytes.
zynq-ocm f800c000.ps7-ocmc: ZYNQ OCM pool: 256 KiB @ 0xcf880000
vgaarb: loaded
SCSI subsystem initialized
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
media: Linux media interface: v0.10
Linux video capture interface: v2.00
pps_core: LinuxPPS API ver. 1 registered
pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
PTP clock support registered
EDAC MC: Ver: 3.0.0
Advanced Linux Sound Architecture Driver Initialized.
clocksource: Switched to clocksource arm_global_timer
NET: Registered protocol family 2
TCP established hash table entries: 2048 (order: 1, 8192 bytes)
TCP bind hash table entries: 2048 (order: 2, 16384 bytes)
TCP: Hash tables configured (established 2048 bind 2048)
UDP hash table entries: 256 (order: 1, 8192 bytes)
UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
NET: Registered protocol family 1
RPC: Registered named UNIX socket transport module.
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
RPC: Registered tcp NFSv4.1 backchannel transport module.
PCI: CLS 0 bytes, default 64
Trying to unpack rootfs image as initramfs...
rootfs image is not initramfs (no cpio magic); looks like an initrd
Freeing initrd memory: 12904K (cce67000 - cdb01000)
hw perfevents: enabled with armv7_cortex_a9 PMU driver, 7 counters available
futex hash table entries: 512 (order: 3, 32768 bytes)
workingset: timestamp_bits=28 max_order=16 bucket_order=0
jffs2: version 2.2. (NAND) (SUMMARY) © 2001-2006 Red Hat, Inc.
io scheduler noop registered
io scheduler deadline registered
io scheduler cfq registered (default)
dma-pl330 f8003000.ps7-dma: Loaded driver for PL330 DMAC-241330
dma-pl330 f8003000.ps7-dma: DBUFF-128x8bytes Num_Chans-8 Num_Peri-4 Num_Events-16
e0000000.serial: ttyPS0 at MMIO 0xe0000000 (irq = 158, base_baud = 6249999) is a xuartps
console [ttyPS0] enabled
xdevcfg f8007000.ps7-dev-cfg: ioremap 0xf8007000 to cf86e000
[drm] Initialized drm 1.1.0 20060810
brd: module loaded
loop: module loaded
CAN device driver interface
gpiod_set_value: invalid GPIO
libphy: MACB_mii_bus: probed
macb e000b000.ethernet eth0: Cadence GEM rev 0x00020118 at 0xe000b000 irq 31 (00:0a:35:00:00:00)
Generic PHY e000b000.etherne:00: attached PHY driver [Generic PHY] (mii_bus:phy_addr=e000b000.etherne:00, irq=-1)
e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k
e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci-pci: EHCI PCI platform driver
usbcore: registered new interface driver usb-storage
mousedev: PS/2 mouse device common for all mice
i2c /dev entries driver
Xilinx Zynq CpuIdle Driver started
sdhci: Secure Digital Host Controller Interface driver
sdhci: Copyright(c) Pierre Ossman
sdhci-pltfm: SDHCI platform and OF driver helper
mmc0: SDHCI controller on e0100000.ps7-sdio [e0100000.ps7-sdio] using ADMA
ledtrig-cpu: registered to indicate activity on CPUs
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
nand: device found, Manufacturer ID: 0xc2, Chip ID: 0xda
nand: Macronix MX30LF2GE8AB
nand: 256 MiB, SLC, erase size: 128 KiB, page size: 2048, OOB size: 64
Bad block table found at page 131008, version 0x01
Bad block table found at page 130944, version 0x01
nand_read_bbt: bad block at 0x00000ff60000
nand_read_bbt: bad block at 0x00000ff80000
nand_read_bbt: bad block at 0x00000ffa0000
nand_read_bbt: bad block at 0x00000ffc0000
6 ofpart partitions found on MTD device pl35x-nand
Creating 6 MTD partitions on "pl35x-nand":
0x000000000000-0x000002800000 : "BOOT.bin-env-dts-kernel"
0x000002800000-0x000004800000 : "ramfs"
0x000004800000-0x000005000000 : "configs"
0x000005000000-0x000006000000 : "reserve"
0x000006000000-0x000008000000 : "ramfs-bak"
0x000008000000-0x000010000000 : "reserve1"
NET: Registered protocol family 10
sit: IPv6 over IPv4 tunneling driver
NET: Registered protocol family 17
can: controller area network core (rev 20120528 abi 9)
NET: Registered protocol family 29
can: raw protocol (rev 20120528)
can: broadcast manager protocol (rev 20120528 t)
can: netlink gateway (rev 20130117) max_hops=1
zynq_pm_ioremap: no compatible node found for 'xlnx,zynq-ddrc-a05'
zynq_pm_late_init: Unable to map DDRC IO memory.
Registering SWP/SWPB emulation handler
hctosys: unable to open rtc device (rtc0)
ALSA device list:
No soundcards found.
RAMDISK: gzip image found at block 0
EXT4-fs (ram0): couldn't mount as ext3 due to feature incompatibilities
EXT4-fs (ram0): mounted filesystem without journal. Opts: (null)
VFS: Mounted root (ext4 filesystem) on device 1:0.
devtmpfs: mounted
Freeing unused kernel memory: 1024K (c0a00000 - c0b00000)
EXT4-fs (ram0): re-mounted. Opts: block_validity,delalloc,barrier,user_xattr
random: dd urandom read with 0 bits of entropy available
ubi0: attaching mtd2
ubi0: scanning is finished
ubi0: attached mtd2 (name "configs", size 8 MiB)
ubi0: PEB size: 131072 bytes (128 KiB), LEB size: 129024 bytes
ubi0: min./max. I/O unit sizes: 2048/2048, sub-page size 512
ubi0: VID header offset: 512 (aligned 512), data offset: 2048
ubi0: good PEBs: 64, bad PEBs: 0, corrupted PEBs: 0
ubi0: user volume: 1, internal volumes: 1, max. volumes count: 128
ubi0: max/mean erase counter: 4/2, WL threshold: 4096, image sequence number: 3789753531
ubi0: available PEBs: 0, total reserved PEBs: 64, PEBs reserved for bad PEB handling: 40
ubi0: background thread "ubi_bgt0d" started, PID 708
UBIFS (ubi0:0): background thread "ubifs_bgt0_0" started, PID 711
UBIFS (ubi0:0): UBIFS: mounted UBI device 0, volume 0, name "configs"
UBIFS (ubi0:0): LEB size: 129024 bytes (126 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
UBIFS (ubi0:0): FS size: 1419264 bytes (1 MiB, 11 LEBs), journal size 903169 bytes (0 MiB, 5 LEBs)
UBIFS (ubi0:0): reserved for root: 67035 bytes (65 KiB)
UBIFS (ubi0:0): media format: w4/r0 (latest is w4/r0), UUID 6F9F7192-A4D4-4849-9C60-79036C53EF78, small LPT model
ubi1: attaching mtd5
ubi1: scanning is finished
ubi1: attached mtd5 (name "reserve1", size 128 MiB)
ubi1: PEB size: 131072 bytes (128 KiB), LEB size: 129024 bytes
ubi1: min./max. I/O unit sizes: 2048/2048, sub-page size 512
ubi1: VID header offset: 512 (aligned 512), data offset: 2048
ubi1: good PEBs: 1019, bad PEBs: 5, corrupted PEBs: 0
ubi1: user volume: 1, internal volumes: 1, max. volumes count: 128
ubi1: max/mean erase counter: 604/190, WL threshold: 4096, image sequence number: 1198263195
ubi1: available PEBs: 0, total reserved PEBs: 1019, PEBs reserved for bad PEB handling: 35
ubi1: background thread "ubi_bgt1d" started, PID 720
UBIFS (ubi1:0): background thread "ubifs_bgt1_0" started, PID 723
UBIFS (ubi1:0): UBIFS: mounted UBI device 1, volume 0, name "reserve1"
UBIFS (ubi1:0): LEB size: 129024 bytes (126 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
UBIFS (ubi1:0): FS size: 125024256 bytes (119 MiB, 969 LEBs), journal size 6322176 bytes (6 MiB, 49 LEBs)
UBIFS (ubi1:0): reserved for root: 4952683 bytes (4836 KiB)
UBIFS (ubi1:0): media format: w4/r0 (latest is w4/r0), UUID 8D25A753-B1E6-461F-BA97-EE4B6F2054F5, small LPT model
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
macb e000b000.ethernet eth0: unable to generate target frequency: 25000000 Hz
macb e000b000.ethernet eth0: link up (100/Full)
IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
In axi fpga driver!
request_mem_region OK!
AXI fpga dev virtual address is 0xcfb40000
*base_vir_addr = 0xb023
In fpga mem driver!
request_mem_region OK!
fpga mem virtual address is 0xd2000000
random: nonblocking pool is initialized
2020-11-01 20:24:12 driver-btm-api.c:779:init_freq_mode: This is scan-user version
2020-11-01 20:24:12 driver-btm-api.c:2451:bitmain_soc_init: opt_multi_version = 1
2020-11-01 20:24:12 driver-btm-api.c:2452:bitmain_soc_init: opt_bitmain_ab = 1
2020-11-01 20:24:12 driver-btm-api.c:2453:bitmain_soc_init: opt_bitmain_work_mode = 0
2020-11-01 20:24:12 driver-btm-api.c:2454:bitmain_soc_init: Miner compile time: Tue Jun 2 10:31:07 CST 2020 type: Antminer S17+
2020-11-01 20:24:12 driver-btm-api.c:2455:bitmain_soc_init: commit version: 1ca50a5 2020-06-01 18:51:22, build by: lol 2020-06-02 10:37:21
2020-11-01 20:24:12 driver-btm-api.c:2083:show_sn: len:16, 80542c467910481c
2020-11-01 20:24:12 driver-btm-api.c:2461:bitmain_soc_init: show sn return 1
2020-11-01 20:24:12 driver-btm-api.c:2103:handle_sn_for_factory_mode: show sn return 1
2020-11-01 20:24:12 driver-btm-api.c:2141:handle_sn_for_factory_mode: read sn success, 80542c467910481c
2020-11-01 20:24:12 fan.c:284:front_fan_power_on: Note: front fan is power on!
2020-11-01 20:24:12 fan.c:296:rear_fan_power_on: Note: rear fan is power on!
2020-11-01 20:24:12 driver-btm-api.c:1314:miner_device_init: Detect 256MB control board of XILINX
2020-11-01 20:24:12 driver-btm-api.c:1255:init_fan_parameter: fan_eft : 0 fan_pwm : 0
2020-11-01 20:24:18 driver-btm-api.c:1239:init_miner_version: miner ID : 80542c467910481c
2020-11-01 20:24:18 driver-btm-api.c:1245:init_miner_version: FPGA Version = 0xB023
2020-11-01 20:24:24 driver-btm-api.c:837:get_product_id: product_id[0] = 0
2020-11-01 20:24:24 driver-btm-api.c:837:get_product_id: product_id[1] = 0
2020-11-01 20:24:24 driver-btm-api.c:837:get_product_id: product_id[2] = 0
2020-11-01 20:24:24 driver-btm-api.c:2234:update_conf_by_power_feedback: Power feedback is disabled
2020-11-01 20:24:24 driver-btm-api.c:2202:get_calibration_voltage: calibration voltage flag is error data.
2020-11-01 20:24:24 driver-btm-api.c:2268:update_conf_by_power_feedback: Note: no calibration voltage, default diff = 0
2020-11-01 20:24:24 frequency.c:1457:adjust_higer_max_vol_table: adjust_higer_max_vol_table, adjust_vol = 0
2020-11-01 20:24:24 thread.c:1363:create_read_nonce_reg_thread: create thread
2020-11-01 20:24:30 driver-btm-api.c:1239:init_miner_version: miner ID : 80542c467910481c
2020-11-01 20:24:30 driver-btm-api.c:1245:init_miner_version: FPGA Version = 0xB023
2020-11-01 20:24:35 driver-btm-api.c:837:get_product_id: product_id[0] = 0
2020-11-01 20:24:35 driver-btm-api.c:837:get_product_id: product_id[1] = 0
2020-11-01 20:24:35 driver-btm-api.c:837:get_product_id: product_id[2] = 0
2020-11-01 20:24:35 driver-btm-api.c:792:_set_project_type: project:0
2020-11-01 20:24:35 driver-btm-api.c:813:_set_project_type: Project type: Antminer S17+
2020-11-01 20:24:35 driver-btm-api.c:824:dump_pcb_bom_version: Chain [0] PCB Version: 0x0100
2020-11-01 20:24:35 driver-btm-api.c:825:dump_pcb_bom_version: Chain [0] BOM Version: 0x0100
2020-11-01 20:24:35 driver-btm-api.c:824:dump_pcb_bom_version: Chain [1] PCB Version: 0x0100
2020-11-01 20:24:35 driver-btm-api.c:825:dump_pcb_bom_version: Chain [1] BOM Version: 0x0100
2020-11-01 20:24:35 driver-btm-api.c:824:dump_pcb_bom_version: Chain [2] PCB Version: 0x0100
2020-11-01 20:24:35 driver-btm-api.c:825:dump_pcb_bom_version: Chain [2] BOM Version: 0x0100
2020-11-01 20:24:37 driver-btm-api.c:2372:bitmain_board_init: Fan check passed.
2020-11-01 20:24:38 board.c:36:jump_and_app_check_restore_pic: chain[0] PIC jump to app
2020-11-01 20:24:40 board.c:40:jump_and_app_check_restore_pic: Check chain[0] PIC fw version=0x88
2020-11-01 20:24:41 board.c:36:jump_and_app_check_restore_pic: chain[1] PIC jump to app
2020-11-01 20:24:43 board.c:40:jump_and_app_check_restore_pic: Check chain[1] PIC fw version=0x88
2020-11-01 20:24:44 board.c:36:jump_and_app_check_restore_pic: chain[2] PIC jump to app
2020-11-01 20:24:47 board.c:40:jump_and_app_check_restore_pic: Check chain[2] PIC fw version=0x88
2020-11-01 20:24:47 thread.c:1358:create_pic_heart_beat_thread: create thread
2020-11-01 20:24:47 power_api.c:213:power_init: Power init:
2020-11-01 20:24:47 power_api.c:214:power_init: current_voltage_raw = 0
2020-11-01 20:24:47 power_api.c:215:power_init: highest_voltage_raw = 2100
2020-11-01 20:24:47 power_api.c:216:power_init: working_voltage_raw = 1950
2020-11-01 20:24:47 power_api.c:217:power_init: higher_voltage_raw = 2040
2020-11-01 20:24:47 power_api.c:218:power_init: check_asic_voltage_raw = 2100
2020-11-01 20:24:47 driver-btm-api.c:2382:bitmain_board_init: Enter 30s sleep to make sure power release finish.
2020-11-01 20:25:19 power_api.c:324:set_to_highest_voltage_by_steps: Set to voltage raw 2100, step by step.
2020-11-01 20:25:44 power_api.c:85:check_voltage_multi: retry time: 0
2020-11-01 20:25:45 power_api.c:40:_get_avg_voltage: chain = 0, voltage = 21.052097
2020-11-01 20:25:46 power_api.c:40:_get_avg_voltage: chain = 1, voltage = 21.121826
2020-11-01 20:25:47 power_api.c:40:_get_avg_voltage: chain = 2, voltage = 21.050867
2020-11-01 20:25:47 power_api.c:53:_get_avg_voltage: average_voltage = 21.074930
2020-11-01 20:25:47 power_api.c:71:check_voltage: target_vol = 21.00, actural_vol = 21.07, check voltage passed.
2020-11-01 20:25:47 uart.c:72:set_baud: set fpga_baud to 115200
2020-11-01 20:25:59 driver-btm-api.c:1134:check_asic_number_with_power_on: Chain[0]: find 65 asic, times 0
2020-11-01 20:26:10 driver-btm-api.c:1134:check_asic_number_with_power_on: Chain[1]: find 65 asic, times 0
2020-11-01 20:26:21 driver-btm-api.c:1134:check_asic_number_with_power_on: Chain[2]: find 65 asic, times 0
2020-11-01 20:26:29 driver-hash-chip.c:266:set_uart_relay: set uart relay to 0x330003
2020-11-01 20:26:29 driver-btm-api.c:435:set_order_clock: chain[0]: set order clock, stragegy 3
2020-11-01 20:26:29 driver-btm-api.c:435:set_order_clock: chain[1]: set order clock, stragegy 3
2020-11-01 20:26:29 driver-btm-api.c:435:set_order_clock: chain[2]: set order clock, stragegy 3
2020-11-01 20:26:30 driver-hash-chip.c:502:set_clock_delay_control: core_data = 0x34
2020-11-01 20:26:30 driver-btm-api.c:1892:check_clock_counter: freq 50 clock_counter_limit 6
2020-11-01 20:26:30 voltage[0] = 1940
2020-11-01 20:26:30 voltage[1] = 1940
2020-11-01 20:26:30 voltage[2] = 1940
2020-11-01 20:26:30 power_api.c:226:set_working_voltage_raw: working_voltage_raw = 1940
2020-11-01 20:26:32 temperature.c:340:calibrate_temp_sensor_one_chain: chain 0 temp sensor NCT218
2020-11-01 20:26:33 temperature.c:340:calibrate_temp_sensor_one_chain: chain 1 temp sensor NCT218
2020-11-01 20:26:34 temperature.c:340:calibrate_temp_sensor_one_chain: chain 2 temp sensor NCT218
2020-11-01 20:26:34 uart.c:72:set_baud: set fpga_baud to 12000000
2020-11-01 20:26:35 driver-btm-api.c:293:check_bringup_temp: Bring up temperature is 26
2020-11-01 20:26:35 thread.c:1378:create_check_miner_status_thread: create thread
2020-11-01 20:26:35 thread.c:1368:create_show_miner_status_thread: create thread
2020-11-01 20:26:35 thread.c:1348:create_temperature_monitor_thread: create thread
2020-11-01 20:26:35 frequency.c:514:check_bringup_temp_dec_freq: dec freq = 0 when bringup temp = 26 dec_freq_index=0
2020-11-01 20:26:35 freq_tuning.c:183:freq_tuning_get_max_freq: Max freq of tuning is 650
2020-11-01 20:26:35 driver-btm-api.c:1765:send_null_work: [DEBUG] Send null work.
2020-11-01 20:26:35 thread.c:1338:create_asic_status_monitor_thread: create thread
2020-11-01 20:26:35 frequency.c:1110:inc_freq_with_fixed_vco: chain = 255, freq = 540, is_higher_voltage = true
2020-11-01 20:26:39 power_api.c:352:set_to_voltage_by_steps: Set to voltage raw 2090, step by step.
2020-11-01 20:26:41 power_api.c:85:check_voltage_multi: retry time: 0
2020-11-01 20:26:42 power_api.c:40:_get_avg_voltage: chain = 0, voltage = 20.880710
2020-11-01 20:26:43 power_api.c:40:_get_avg_voltage: chain = 1, voltage = 20.950570
2020-11-01 20:26:44 power_api.c:40:_get_avg_voltage: chain = 2, voltage = 20.907063
2020-11-01 20:26:44 power_api.c:53:_get_avg_voltage: average_voltage = 20.912781
2020-11-01 20:26:44 power_api.c:71:check_voltage: target_vol = 20.90, actural_vol = 20.91, check voltage passed.
-
this is a updated kernel log
Booting Linux on physical CPU 0x0
Linux version 4.6.0-xilinx-gff8137b-dirty (lzq@armdev2) (gcc version 4.8.3 20140320 (prerelease) (Sourcery CodeBench Lite 2014.05-23) ) #25 SMP PREEMPT Fri Nov 23 15:30:52 CST 2018
CPU: ARMv7 Processor [413fc090] revision 0 (ARMv7), cr=18c5387d
CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
Machine model: Xilinx Zynq
cma: Reserved 16 MiB at 0x0e000000
Memory policy: Data cache writealloc
On node 0 totalpages: 61440
free_area_init_node: node 0, pgdat c0b39280, node_mem_map cde10000
Normal zone: 480 pages used for memmap
Normal zone: 0 pages reserved
Normal zone: 61440 pages, LIFO batch:15
percpu: Embedded 12 pages/cpu @cddf1000 s19776 r8192 d21184 u49152
pcpu-alloc: s19776 r8192 d21184 u49152 alloc=12*4096
pcpu-alloc: [0] 0 [0] 1
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 60960
Kernel command line: mem=240M console=ttyPS0,115200 ramdisk_size=33554432 root=/dev/ram rw earlyprintk
PID hash table entries: 1024 (order: 0, 4096 bytes)
Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
Memory: 203432K/245760K available (6345K kernel code, 231K rwdata, 1896K rodata, 1024K init, 223K bss, 25944K reserved, 16384K cma-reserved, 0K highmem)
Virtual kernel memory layout:
vector : 0xffff0000 - 0xffff1000 ( 4 kB)
fixmap : 0xffc00000 - 0xfff00000 (3072 kB)
vmalloc : 0xcf800000 - 0xff800000 ( 768 MB)
lowmem : 0xc0000000 - 0xcf000000 ( 240 MB)
pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
modules : 0xbf000000 - 0xbfe00000 ( 14 MB)
.text : 0xc0008000 - 0xc090c424 (9234 kB)
.init : 0xc0a00000 - 0xc0b00000 (1024 kB)
.data : 0xc0b00000 - 0xc0b39fe0 ( 232 kB)
.bss : 0xc0b39fe0 - 0xc0b71c28 ( 224 kB)
Preemptible hierarchical RCU implementation.
Build-time adjustment of leaf fanout to 32.
RCU restricting CPUs from NR_CPUS=4 to nr_cpu_ids=2.
RCU: Adjusting geometry for rcu_fanout_leaf=32, nr_cpu_ids=2
NR_IRQS:16 nr_irqs:16 16
efuse mapped to cf800000
ps7-slcr mapped to cf802000
L2C: platform modifies aux control register: 0x72360000 -> 0x72760000
L2C: DT/platform modifies aux control register: 0x72360000 -> 0x72760000
L2C-310 erratum 769419 enabled
L2C-310 enabling early BRESP for Cortex-A9
L2C-310 full line of zeros enabled for Cortex-A9
L2C-310 ID prefetch enabled, offset 1 lines
L2C-310 dynamic clock gating enabled, standby mode enabled
L2C-310 cache controller enabled, 8 ways, 512 kB
L2C-310: CACHE_ID 0x410000c8, AUX_CTRL 0x76760001
zynq_clock_init: clkc starts at cf802100
Zynq clock init
sched_clock: 64 bits at 333MHz, resolution 3ns, wraps every 4398046511103ns
clocksource: arm_global_timer: mask: 0xffffffffffffffff max_cycles: 0x4ce07af025, max_idle_ns: 440795209040 ns
Switching to timer-based delay loop, resolution 3ns
clocksource: ttc_clocksource: mask: 0xffff max_cycles: 0xffff, max_idle_ns: 537538477 ns
ps7-ttc #0 at cf80a000, irq=18
Console: colour dummy device 80x30
Calibrating delay loop (skipped), value calculated using timer frequency.. 666.66 BogoMIPS (lpj=3333333)
pid_max: default: 32768 minimum: 301
Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
CPU: Testing write buffer coherency: ok
CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
Setting up static identity map for 0x100000 - 0x100058
CPU1: failed to boot: -1
Brought up 1 CPUs
SMP: Total of 1 processors activated (666.66 BogoMIPS).
CPU: All CPU(s) started in SVC mode.
devtmpfs: initialized
VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 4
clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
pinctrl core: initialized pinctrl subsystem
NET: Registered protocol family 16
DMA: preallocated 256 KiB pool for atomic coherent allocations
cpuidle: using governor menu
hw-breakpoint: found 5 (+1 reserved) breakpoint and 1 watchpoint registers.
hw-breakpoint: maximum watchpoint size is 4 bytes.
zynq-ocm f800c000.ps7-ocmc: ZYNQ OCM pool: 256 KiB @ 0xcf880000
vgaarb: loaded
SCSI subsystem initialized
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
media: Linux media interface: v0.10
Linux video capture interface: v2.00
pps_core: LinuxPPS API ver. 1 registered
pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
PTP clock support registered
EDAC MC: Ver: 3.0.0
Advanced Linux Sound Architecture Driver Initialized.
clocksource: Switched to clocksource arm_global_timer
NET: Registered protocol family 2
TCP established hash table entries: 2048 (order: 1, 8192 bytes)
TCP bind hash table entries: 2048 (order: 2, 16384 bytes)
TCP: Hash tables configured (established 2048 bind 2048)
UDP hash table entries: 256 (order: 1, 8192 bytes)
UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
NET: Registered protocol family 1
RPC: Registered named UNIX socket transport module.
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
RPC: Registered tcp NFSv4.1 backchannel transport module.
PCI: CLS 0 bytes, default 64
Trying to unpack rootfs image as initramfs...
rootfs image is not initramfs (no cpio magic); looks like an initrd
Freeing initrd memory: 12904K (cce67000 - cdb01000)
hw perfevents: enabled with armv7_cortex_a9 PMU driver, 7 counters available
futex hash table entries: 512 (order: 3, 32768 bytes)
workingset: timestamp_bits=28 max_order=16 bucket_order=0
jffs2: version 2.2. (NAND) (SUMMARY) © 2001-2006 Red Hat, Inc.
io scheduler noop registered
io scheduler deadline registered
io scheduler cfq registered (default)
dma-pl330 f8003000.ps7-dma: Loaded driver for PL330 DMAC-241330
dma-pl330 f8003000.ps7-dma: DBUFF-128x8bytes Num_Chans-8 Num_Peri-4 Num_Events-16
e0000000.serial: ttyPS0 at MMIO 0xe0000000 (irq = 158, base_baud = 6249999) is a xuartps
console [ttyPS0] enabled
xdevcfg f8007000.ps7-dev-cfg: ioremap 0xf8007000 to cf86e000
[drm] Initialized drm 1.1.0 20060810
brd: module loaded
loop: module loaded
CAN device driver interface
gpiod_set_value: invalid GPIO
libphy: MACB_mii_bus: probed
macb e000b000.ethernet eth0: Cadence GEM rev 0x00020118 at 0xe000b000 irq 31 (00:0a:35:00:00:00)
Generic PHY e000b000.etherne:00: attached PHY driver [Generic PHY] (mii_bus:phy_addr=e000b000.etherne:00, irq=-1)
e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k
e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci-pci: EHCI PCI platform driver
usbcore: registered new interface driver usb-storage
mousedev: PS/2 mouse device common for all mice
i2c /dev entries driver
Xilinx Zynq CpuIdle Driver started
sdhci: Secure Digital Host Controller Interface driver
sdhci: Copyright(c) Pierre Ossman
sdhci-pltfm: SDHCI platform and OF driver helper
mmc0: SDHCI controller on e0100000.ps7-sdio [e0100000.ps7-sdio] using ADMA
ledtrig-cpu: registered to indicate activity on CPUs
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
nand: device found, Manufacturer ID: 0xc2, Chip ID: 0xda
nand: Macronix MX30LF2GE8AB
nand: 256 MiB, SLC, erase size: 128 KiB, page size: 2048, OOB size: 64
Bad block table found at page 131008, version 0x01
Bad block table found at page 130944, version 0x01
nand_read_bbt: bad block at 0x00000ff60000
nand_read_bbt: bad block at 0x00000ff80000
nand_read_bbt: bad block at 0x00000ffa0000
nand_read_bbt: bad block at 0x00000ffc0000
6 ofpart partitions found on MTD device pl35x-nand
Creating 6 MTD partitions on "pl35x-nand":
0x000000000000-0x000002800000 : "BOOT.bin-env-dts-kernel"
0x000002800000-0x000004800000 : "ramfs"
0x000004800000-0x000005000000 : "configs"
0x000005000000-0x000006000000 : "reserve"
0x000006000000-0x000008000000 : "ramfs-bak"
0x000008000000-0x000010000000 : "reserve1"
NET: Registered protocol family 10
sit: IPv6 over IPv4 tunneling driver
NET: Registered protocol family 17
can: controller area network core (rev 20120528 abi 9)
NET: Registered protocol family 29
can: raw protocol (rev 20120528)
can: broadcast manager protocol (rev 20120528 t)
can: netlink gateway (rev 20130117) max_hops=1
zynq_pm_ioremap: no compatible node found for 'xlnx,zynq-ddrc-a05'
zynq_pm_late_init: Unable to map DDRC IO memory.
Registering SWP/SWPB emulation handler
hctosys: unable to open rtc device (rtc0)
ALSA device list:
No soundcards found.
RAMDISK: gzip image found at block 0
EXT4-fs (ram0): couldn't mount as ext3 due to feature incompatibilities
EXT4-fs (ram0): mounted filesystem without journal. Opts: (null)
VFS: Mounted root (ext4 filesystem) on device 1:0.
devtmpfs: mounted
Freeing unused kernel memory: 1024K (c0a00000 - c0b00000)
EXT4-fs (ram0): re-mounted. Opts: block_validity,delalloc,barrier,user_xattr
random: dd urandom read with 0 bits of entropy available
ubi0: attaching mtd2
ubi0: scanning is finished
ubi0: attached mtd2 (name "configs", size 8 MiB)
ubi0: PEB size: 131072 bytes (128 KiB), LEB size: 129024 bytes
ubi0: min./max. I/O unit sizes: 2048/2048, sub-page size 512
ubi0: VID header offset: 512 (aligned 512), data offset: 2048
ubi0: good PEBs: 64, bad PEBs: 0, corrupted PEBs: 0
ubi0: user volume: 1, internal volumes: 1, max. volumes count: 128
ubi0: max/mean erase counter: 4/2, WL threshold: 4096, image sequence number: 3789753531
ubi0: available PEBs: 0, total reserved PEBs: 64, PEBs reserved for bad PEB handling: 40
ubi0: background thread "ubi_bgt0d" started, PID 708
UBIFS (ubi0:0): background thread "ubifs_bgt0_0" started, PID 711
UBIFS (ubi0:0): UBIFS: mounted UBI device 0, volume 0, name "configs"
UBIFS (ubi0:0): LEB size: 129024 bytes (126 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
UBIFS (ubi0:0): FS size: 1419264 bytes (1 MiB, 11 LEBs), journal size 903169 bytes (0 MiB, 5 LEBs)
UBIFS (ubi0:0): reserved for root: 67035 bytes (65 KiB)
UBIFS (ubi0:0): media format: w4/r0 (latest is w4/r0), UUID 6F9F7192-A4D4-4849-9C60-79036C53EF78, small LPT model
ubi1: attaching mtd5
ubi1: scanning is finished
ubi1: attached mtd5 (name "reserve1", size 128 MiB)
ubi1: PEB size: 131072 bytes (128 KiB), LEB size: 129024 bytes
ubi1: min./max. I/O unit sizes: 2048/2048, sub-page size 512
ubi1: VID header offset: 512 (aligned 512), data offset: 2048
ubi1: good PEBs: 1019, bad PEBs: 5, corrupted PEBs: 0
ubi1: user volume: 1, internal volumes: 1, max. volumes count: 128
ubi1: max/mean erase counter: 604/190, WL threshold: 4096, image sequence number: 1198263195
ubi1: available PEBs: 0, total reserved PEBs: 1019, PEBs reserved for bad PEB handling: 35
ubi1: background thread "ubi_bgt1d" started, PID 720
UBIFS (ubi1:0): background thread "ubifs_bgt1_0" started, PID 723
UBIFS (ubi1:0): UBIFS: mounted UBI device 1, volume 0, name "reserve1"
UBIFS (ubi1:0): LEB size: 129024 bytes (126 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
UBIFS (ubi1:0): FS size: 125024256 bytes (119 MiB, 969 LEBs), journal size 6322176 bytes (6 MiB, 49 LEBs)
UBIFS (ubi1:0): reserved for root: 4952683 bytes (4836 KiB)
UBIFS (ubi1:0): media format: w4/r0 (latest is w4/r0), UUID 8D25A753-B1E6-461F-BA97-EE4B6F2054F5, small LPT model
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
macb e000b000.ethernet eth0: unable to generate target frequency: 25000000 Hz
macb e000b000.ethernet eth0: link up (100/Full)
IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
In axi fpga driver!
request_mem_region OK!
AXI fpga dev virtual address is 0xcfb40000
*base_vir_addr = 0xb023
In fpga mem driver!
request_mem_region OK!
fpga mem virtual address is 0xd2000000
random: nonblocking pool is initialized
2020-11-01 20:24:12 driver-btm-api.c:779:init_freq_mode: This is scan-user version
2020-11-01 20:24:12 driver-btm-api.c:2451:bitmain_soc_init: opt_multi_version = 1
2020-11-01 20:24:12 driver-btm-api.c:2452:bitmain_soc_init: opt_bitmain_ab = 1
2020-11-01 20:24:12 driver-btm-api.c:2453:bitmain_soc_init: opt_bitmain_work_mode = 0
2020-11-01 20:24:12 driver-btm-api.c:2454:bitmain_soc_init: Miner compile time: Tue Jun 2 10:31:07 CST 2020 type: Antminer S17+
2020-11-01 20:24:12 driver-btm-api.c:2455:bitmain_soc_init: commit version: 1ca50a5 2020-06-01 18:51:22, build by: lol 2020-06-02 10:37:21
2020-11-01 20:24:12 driver-btm-api.c:2083:show_sn: len:16, 80542c467910481c
2020-11-01 20:24:12 driver-btm-api.c:2461:bitmain_soc_init: show sn return 1
2020-11-01 20:24:12 driver-btm-api.c:2103:handle_sn_for_factory_mode: show sn return 1
2020-11-01 20:24:12 driver-btm-api.c:2141:handle_sn_for_factory_mode: read sn success, 80542c467910481c
2020-11-01 20:24:12 fan.c:284:front_fan_power_on: Note: front fan is power on!
2020-11-01 20:24:12 fan.c:296:rear_fan_power_on: Note: rear fan is power on!
2020-11-01 20:24:12 driver-btm-api.c:1314:miner_device_init: Detect 256MB control board of XILINX
2020-11-01 20:24:12 driver-btm-api.c:1255:init_fan_parameter: fan_eft : 0 fan_pwm : 0
2020-11-01 20:24:18 driver-btm-api.c:1239:init_miner_version: miner ID : 80542c467910481c
2020-11-01 20:24:18 driver-btm-api.c:1245:init_miner_version: FPGA Version = 0xB023
2020-11-01 20:24:24 driver-btm-api.c:837:get_product_id: product_id[0] = 0
2020-11-01 20:24:24 driver-btm-api.c:837:get_product_id: product_id[1] = 0
2020-11-01 20:24:24 driver-btm-api.c:837:get_product_id: product_id[2] = 0
2020-11-01 20:24:24 driver-btm-api.c:2234:update_conf_by_power_feedback: Power feedback is disabled
2020-11-01 20:24:24 driver-btm-api.c:2202:get_calibration_voltage: calibration voltage flag is error data.
2020-11-01 20:24:24 driver-btm-api.c:2268:update_conf_by_power_feedback: Note: no calibration voltage, default diff = 0
2020-11-01 20:24:24 frequency.c:1457:adjust_higer_max_vol_table: adjust_higer_max_vol_table, adjust_vol = 0
2020-11-01 20:24:24 thread.c:1363:create_read_nonce_reg_thread: create thread
2020-11-01 20:24:30 driver-btm-api.c:1239:init_miner_version: miner ID : 80542c467910481c
2020-11-01 20:24:30 driver-btm-api.c:1245:init_miner_version: FPGA Version = 0xB023
2020-11-01 20:24:35 driver-btm-api.c:837:get_product_id: product_id[0] = 0
2020-11-01 20:24:35 driver-btm-api.c:837:get_product_id: product_id[1] = 0
2020-11-01 20:24:35 driver-btm-api.c:837:get_product_id: product_id[2] = 0
2020-11-01 20:24:35 driver-btm-api.c:792:_set_project_type: project:0
2020-11-01 20:24:35 driver-btm-api.c:813:_set_project_type: Project type: Antminer S17+
2020-11-01 20:24:35 driver-btm-api.c:824:dump_pcb_bom_version: Chain [0] PCB Version: 0x0100
2020-11-01 20:24:35 driver-btm-api.c:825:dump_pcb_bom_version: Chain [0] BOM Version: 0x0100
2020-11-01 20:24:35 driver-btm-api.c:824:dump_pcb_bom_version: Chain [1] PCB Version: 0x0100
2020-11-01 20:24:35 driver-btm-api.c:825:dump_pcb_bom_version: Chain [1] BOM Version: 0x0100
2020-11-01 20:24:35 driver-btm-api.c:824:dump_pcb_bom_version: Chain [2] PCB Version: 0x0100
2020-11-01 20:24:35 driver-btm-api.c:825:dump_pcb_bom_version: Chain [2] BOM Version: 0x0100
2020-11-01 20:24:37 driver-btm-api.c:2372:bitmain_board_init: Fan check passed.
2020-11-01 20:24:38 board.c:36:jump_and_app_check_restore_pic: chain[0] PIC jump to app
2020-11-01 20:24:40 board.c:40:jump_and_app_check_restore_pic: Check chain[0] PIC fw version=0x88
2020-11-01 20:24:41 board.c:36:jump_and_app_check_restore_pic: chain[1] PIC jump to app
2020-11-01 20:24:43 board.c:40:jump_and_app_check_restore_pic: Check chain[1] PIC fw version=0x88
2020-11-01 20:24:44 board.c:36:jump_and_app_check_restore_pic: chain[2] PIC jump to app
2020-11-01 20:24:47 board.c:40:jump_and_app_check_restore_pic: Check chain[2] PIC fw version=0x88
2020-11-01 20:24:47 thread.c:1358:create_pic_heart_beat_thread: create thread
2020-11-01 20:24:47 power_api.c:213:power_init: Power init:
2020-11-01 20:24:47 power_api.c:214:power_init: current_voltage_raw = 0
2020-11-01 20:24:47 power_api.c:215:power_init: highest_voltage_raw = 2100
2020-11-01 20:24:47 power_api.c:216:power_init: working_voltage_raw = 1950
2020-11-01 20:24:47 power_api.c:217:power_init: higher_voltage_raw = 2040
2020-11-01 20:24:47 power_api.c:218:power_init: check_asic_voltage_raw = 2100
2020-11-01 20:24:47 driver-btm-api.c:2382:bitmain_board_init: Enter 30s sleep to make sure power release finish.
2020-11-01 20:25:19 power_api.c:324:set_to_highest_voltage_by_steps: Set to voltage raw 2100, step by step.
2020-11-01 20:25:44 power_api.c:85:check_voltage_multi: retry time: 0
2020-11-01 20:25:45 power_api.c:40:_get_avg_voltage: chain = 0, voltage = 21.052097
2020-11-01 20:25:46 power_api.c:40:_get_avg_voltage: chain = 1, voltage = 21.121826
2020-11-01 20:25:47 power_api.c:40:_get_avg_voltage: chain = 2, voltage = 21.050867
2020-11-01 20:25:47 power_api.c:53:_get_avg_voltage: average_voltage = 21.074930
2020-11-01 20:25:47 power_api.c:71:check_voltage: target_vol = 21.00, actural_vol = 21.07, check voltage passed.
2020-11-01 20:25:47 uart.c:72:set_baud: set fpga_baud to 115200
2020-11-01 20:25:59 driver-btm-api.c:1134:check_asic_number_with_power_on: Chain[0]: find 65 asic, times 0
2020-11-01 20:26:10 driver-btm-api.c:1134:check_asic_number_with_power_on: Chain[1]: find 65 asic, times 0
2020-11-01 20:26:21 driver-btm-api.c:1134:check_asic_number_with_power_on: Chain[2]: find 65 asic, times 0
2020-11-01 20:26:29 driver-hash-chip.c:266:set_uart_relay: set uart relay to 0x330003
2020-11-01 20:26:29 driver-btm-api.c:435:set_order_clock: chain[0]: set order clock, stragegy 3
2020-11-01 20:26:29 driver-btm-api.c:435:set_order_clock: chain[1]: set order clock, stragegy 3
2020-11-01 20:26:29 driver-btm-api.c:435:set_order_clock: chain[2]: set order clock, stragegy 3
2020-11-01 20:26:30 driver-hash-chip.c:502:set_clock_delay_control: core_data = 0x34
2020-11-01 20:26:30 driver-btm-api.c:1892:check_clock_counter: freq 50 clock_counter_limit 6
2020-11-01 20:26:30 voltage[0] = 1940
2020-11-01 20:26:30 voltage[1] = 1940
2020-11-01 20:26:30 voltage[2] = 1940
2020-11-01 20:26:30 power_api.c:226:set_working_voltage_raw: working_voltage_raw = 1940
2020-11-01 20:26:32 temperature.c:340:calibrate_temp_sensor_one_chain: chain 0 temp sensor NCT218
2020-11-01 20:26:33 temperature.c:340:calibrate_temp_sensor_one_chain: chain 1 temp sensor NCT218
2020-11-01 20:26:34 temperature.c:340:calibrate_temp_sensor_one_chain: chain 2 temp sensor NCT218
2020-11-01 20:26:34 uart.c:72:set_baud: set fpga_baud to 12000000
2020-11-01 20:26:35 driver-btm-api.c:293:check_bringup_temp: Bring up temperature is 26
2020-11-01 20:26:35 thread.c:1378:create_check_miner_status_thread: create thread
2020-11-01 20:26:35 thread.c:1368:create_show_miner_status_thread: create thread
2020-11-01 20:26:35 thread.c:1348:create_temperature_monitor_thread: create thread
2020-11-01 20:26:35 frequency.c:514:check_bringup_temp_dec_freq: dec freq = 0 when bringup temp = 26 dec_freq_index=0
2020-11-01 20:26:35 freq_tuning.c:183:freq_tuning_get_max_freq: Max freq of tuning is 650
2020-11-01 20:26:35 driver-btm-api.c:1765:send_null_work: [DEBUG] Send null work.
2020-11-01 20:26:35 thread.c:1338:create_asic_status_monitor_thread: create thread
2020-11-01 20:26:35 frequency.c:1110:inc_freq_with_fixed_vco: chain = 255, freq = 540, is_higher_voltage = true
2020-11-01 20:26:39 power_api.c:352:set_to_voltage_by_steps: Set to voltage raw 2090, step by step.
2020-11-01 20:26:41 power_api.c:85:check_voltage_multi: retry time: 0
2020-11-01 20:26:42 power_api.c:40:_get_avg_voltage: chain = 0, voltage = 20.880710
2020-11-01 20:26:43 power_api.c:40:_get_avg_voltage: chain = 1, voltage = 20.950570
2020-11-01 20:26:44 power_api.c:40:_get_avg_voltage: chain = 2, voltage = 20.907063
2020-11-01 20:26:44 power_api.c:53:_get_avg_voltage: average_voltage = 20.912781
2020-11-01 20:26:44 power_api.c:71:check_voltage: target_vol = 20.90, actural_vol = 20.91, check voltage passed.
2020-11-01 20:29:09 power_api.c:352:set_to_voltage_by_steps: Set to voltage raw 2080, step by step.
2020-11-01 20:29:11 power_api.c:85:check_voltage_multi: retry time: 0
2020-11-01 20:29:12 power_api.c:40:_get_avg_voltage: chain = 0, voltage = 20.760151
2020-11-01 20:29:13 power_api.c:40:_get_avg_voltage: chain = 1, voltage = 20.806084
2020-11-01 20:29:15 power_api.c:40:_get_avg_voltage: chain = 2, voltage = 20.742255
2020-11-01 20:29:15 power_api.c:53:_get_avg_voltage: average_voltage = 20.769497
2020-11-01 20:29:15 power_api.c:71:check_voltage: target_vol = 20.80, actural_vol = 20.77, check voltage passed.
2020-11-01 20:30:05 power_api.c:352:set_to_voltage_by_steps: Set to voltage raw 2060, step by step.
2020-11-01 20:30:06 power_api.c:85:check_voltage_multi: retry time: 0
2020-11-01 20:30:07 power_api.c:40:_get_avg_voltage: chain = 0, voltage = 20.543146
2020-11-01 20:30:08 power_api.c:40:_get_avg_voltage: chain = 1, voltage = 20.613435
2020-11-01 20:30:10 power_api.c:40:_get_avg_voltage: chain = 2, voltage = 20.553903
2020-11-01 20:30:10 power_api.c:53:_get_avg_voltage: average_voltage = 20.570161
2020-11-01 20:30:10 power_api.c:71:check_voltage: target_vol = 20.60, actural_vol = 20.57, check voltage passed.
2020-11-01 20:32:12 frequency.c:1152:inc_freq_with_fixed_step: chain = 0, freq_start = 540, freq_end = 560, freq_step = 5, is_higher_voltage = true
2020-11-01 20:32:16 power_api.c:352:set_to_voltage_by_steps: Set to voltage raw 2030, step by step.
2020-11-01 20:32:17 power_api.c:85:check_voltage_multi: retry time: 0
2020-11-01 20:32:18 power_api.c:40:_get_avg_voltage: chain = 0, voltage = 20.303685
2020-11-01 20:32:20 power_api.c:40:_get_avg_voltage: chain = 1, voltage = 20.350253
2020-11-01 20:32:21 power_api.c:40:_get_avg_voltage: chain = 2, voltage = 20.271375
2020-11-01 20:32:21 power_api.c:53:_get_avg_voltage: average_voltage = 20.308438
2020-11-01 20:32:21 power_api.c:71:check_voltage: target_vol = 20.30, actural_vol = 20.31, check voltage passed.
2020-11-01 20:32:25 frequency.c:1152:inc_freq_with_fixed_step: chain = 2, freq_start = 540, freq_end = 560, freq_step = 5, is_higher_voltage = true
2020-11-01 20:32:25 power_api.c:352:set_to_voltage_by_steps: Set to voltage raw 2060, step by step.
2020-11-01 20:32:26 power_api.c:85:check_voltage_multi: retry time: 0
2020-11-01 20:32:28 power_api.c:40:_get_avg_voltage: chain = 0, voltage = 20.543146
2020-11-01 20:32:29 power_api.c:40:_get_avg_voltage: chain = 1, voltage = 20.589354
2020-11-01 20:32:30 power_api.c:40:_get_avg_voltage: chain = 2, voltage = 20.530359
2020-11-01 20:32:30 power_api.c:53:_get_avg_voltage: average_voltage = 20.554286
2020-11-01 20:32:30 power_api.c:71:check_voltage: target_vol = 20.60, actural_vol = 20.55, check voltage passed.
2020-11-01 20:32:34 power_api.c:352:set_to_voltage_by_steps: Set to voltage raw 2030, step by step.
2020-11-01 20:32:36 power_api.c:85:check_voltage_multi: retry time: 0
2020-11-01 20:32:37 power_api.c:40:_get_avg_voltage: chain = 0, voltage = 20.253806
2020-11-01 20:32:38 power_api.c:40:_get_avg_voltage: chain = 1, voltage = 20.348543
2020-11-01 20:32:39 power_api.c:40:_get_avg_voltage: chain = 2, voltage = 20.247831
2020-11-01 20:32:39 power_api.c:53:_get_avg_voltage: average_voltage = 20.283393
2020-11-01 20:32:39 power_api.c:71:check_voltage: target_vol = 20.30, actural_vol = 20.28, check voltage passed.
2020-11-01 20:32:43 power_api.c:352:set_to_voltage_by_steps: Set to voltage raw 2020, step by step.
2020-11-01 20:32:45 power_api.c:85:check_voltage_multi: retry time: 0
2020-11-01 20:32:46 power_api.c:40:_get_avg_voltage: chain = 0, voltage = 20.157359
2020-11-01 20:32:47 power_api.c:40:_get_avg_voltage: chain = 1, voltage = 20.204056
2020-11-01 20:32:48 power_api.c:40:_get_avg_voltage: chain = 2, voltage = 20.177199
2020-11-01 20:32:48 power_api.c:53:_get_avg_voltage: average_voltage = 20.179538
2020-11-01 20:32:48 power_api.c:71:check_voltage: target_vol = 20.20, actural_vol = 20.18, check voltage passed.
2020-11-01 20:32:48 frequency.c:1181:inc_asic_diff_freq_by_steps: chain = 0, start = 560, freq_step = 5
2020-11-01 20:32:55 frequency.c:1181:inc_asic_diff_freq_by_steps: chain = 1, start = 540, freq_step = 5
2020-11-01 20:32:58 thread.c:1036:check_temperature: over max temp, pcb temp 66 (max 83), chip temp 104(max 103)
2020-11-01 20:32:58 driver-btm-api.c:222:set_miner_status: ERROR_TEMP_TOO_HIGH
2020-11-01 20:32:58 driver-btm-api.c:156:stop_mining: stop mining: over max temp
2020-11-01 20:32:58 thread.c:1388:cancel_temperature_monitor_thread: cancel thread
2020-11-01 20:32:58 thread.c:1403:cancel_read_nonce_reg_thread: cancel thread
2020-11-01 20:32:58 thread.c:1343:cancel_asic_status_monitor_thread: cancel thread
2020-11-01 20:32:58 driver-btm-api.c:141:killall_hashboard: ****power off hashboard****
2020-11-01 20:33:01 frequency.c:1181:inc_asic_diff_freq_by_steps: chain = 2, start = 560, freq_step = 5
2020-11-01 20:33:07 driver-btm-api.c:765:set_timeout: freq = 610, percent = 90, hcn = 44236, timeout = 72
2020-11-01 20:33:07 power_api.c:310:set_to_working_voltage_by_steps: Set to voltage raw 1940, step by step.
2020-11-01 20:33:10 power_api.c:85:check_voltage_multi: retry time: 0
2020-11-01 20:33:11 power_api.c:40:_get_avg_voltage: chain = 0, voltage = 3.548920
2020-11-01 20:33:12 power_api.c:40:_get_avg_voltage: chain = 1, voltage = 3.404066
2020-11-01 20:33:13 power_api.c:40:_get_avg_voltage: chain = 2, voltage = 2.475186
2020-11-01 20:33:13 power_api.c:53:_get_avg_voltage: average_voltage = 3.142724
2020-11-01 20:33:13 power_api.c:66:check_voltage: target_vol = 19.40, actural_vol = 3.14, more than 1.0v diff.
2020-11-01 20:33:14 power_api.c:85:check_voltage_multi: retry time: 1
2020-11-01 20:33:16 power_api.c:40:_get_avg_voltage: chain = 0, voltage = 2.196950
2020-11-01 20:33:17 power_api.c:40:_get_avg_voltage: chain = 1, voltage = 2.170051
2020-11-01 20:33:18 power_api.c:40:_get_avg_voltage: chain = 2, voltage = 2.121588
2020-11-01 20:33:18 power_api.c:53:_get_avg_voltage: average_voltage = 2.162863
2020-11-01 20:33:18 power_api.c:66:check_voltage: target_vol = 19.40, actural_vol = 2.16, more than 1.0v diff.
2020-11-01 20:33:19 power_api.c:85:check_voltage_multi: retry time: 2
2020-11-01 20:33:20 power_api.c:40:_get_avg_voltage: chain = 0, voltage = 1.955527
2020-11-01 20:33:21 power_api.c:40:_get_avg_voltage: chain = 1, voltage = 1.928934
2020-11-01 20:33:22 power_api.c:40:_get_avg_voltage: chain = 2, voltage = 1.911801
2020-11-01 20:33:22 power_api.c:53:_get_avg_voltage: average_voltage = 1.932088
2020-11-01 20:33:22 power_api.c:66:check_voltage: target_vol = 19.40, actural_vol = 1.93, more than 1.0v diff.
2020-11-01 20:33:23 power_api.c:85:check_voltage_multi: retry time: 3
2020-11-01 20:33:24 power_api.c:40:_get_avg_voltage: chain = 0, voltage = 1.738247
2020-11-01 20:33:25 power_api.c:40:_get_avg_voltage: chain = 1, voltage = 1.736041
2020-11-01 20:33:26 power_api.c:40:_get_avg_voltage: chain = 2, voltage = 1.720844
2020-11-01 20:33:26 power_api.c:53:_get_avg_voltage: average_voltage = 1.731710
2020-11-01 20:33:26 power_api.c:66:check_voltage: target_vol = 19.40, actural_vol = 1.73, more than 1.0v diff.
2020-11-01 20:33:27 power_api.c:85:check_voltage_multi: retry time: 4
2020-11-01 20:33:28 power_api.c:40:_get_avg_voltage: chain = 0, voltage = 1.569250
2020-11-01 20:33:30 power_api.c:40:_get_avg_voltage: chain = 1, voltage = 1.569250
2020-11-01 20:33:31 power_api.c:40:_get_avg_voltage: chain = 2, voltage = 1.555831
2020-11-01 20:33:31 power_api.c:53:_get_avg_voltage: average_voltage = 1.564777
2020-11-01 20:33:31 power_api.c:66:check_voltage: target_vol = 19.40, actural_vol = 1.56, more than 1.0v diff.
2020-11-01 20:33:32 power_api.c:85:check_voltage_multi: retry time: 5
2020-11-01 20:33:33 power_api.c:40:_get_avg_voltage: chain = 0, voltage = 1.424396
2020-11-01 20:33:34 power_api.c:40:_get_avg_voltage: chain = 1, voltage = 1.422589
2020-11-01 20:33:35 power_api.c:40:_get_avg_voltage: chain = 2, voltage = 1.414392
2020-11-01 20:33:35 power_api.c:53:_get_avg_voltage: average_voltage = 1.420459
2020-11-01 20:33:35 power_api.c:66:check_voltage: target_vol = 19.40, actural_vol = 1.42, more than 1.0v diff.
2020-11-01 20:33:36 power_api.c:85:check_voltage_multi: retry time: 6
2020-11-01 20:33:37 power_api.c:40:_get_avg_voltage: chain = 0, voltage = 1.303685
2020-11-01 20:33:38 power_api.c:40:_get_avg_voltage: chain = 1, voltage = 1.303685
2020-11-01 20:33:39 power_api.c:40:_get_avg_voltage: chain = 2, voltage = 1.321739
2020-11-01 20:33:39 power_api.c:53:_get_avg_voltage: average_voltage = 1.309703
2020-11-01 20:33:39 power_api.c:66:check_voltage: target_vol = 19.40, actural_vol = 1.31, more than 1.0v diff.
2020-11-01 20:33:40 power_api.c:85:check_voltage_multi: retry time: 7
2020-11-01 20:33:41 power_api.c:40:_get_avg_voltage: chain = 0, voltage = 1.207116
2020-11-01 20:33:42 power_api.c:40:_get_avg_voltage: chain = 1, voltage = 1.205584
2020-11-01 20:33:44 power_api.c:40:_get_avg_voltage: chain = 2, voltage = 1.225806
2020-11-01 20:33:44 power_api.c:53:_get_avg_voltage: average_voltage = 1.212835
2020-11-01 20:33:44 power_api.c:66:check_voltage: target_vol = 19.40, actural_vol = 1.21, more than 1.0v diff.
2020-11-01 20:33:45 power_api.c:85:check_voltage_multi: retry time: 8
2020-11-01 20:33:46 power_api.c:40:_get_avg_voltage: chain = 0, voltage = 1.109137
2020-11-01 20:33:47 power_api.c:40:_get_avg_voltage: chain = 1, voltage = 1.109137
2020-11-01 20:33:48 power_api.c:40:_get_avg_voltage: chain = 2, voltage = 1.155087
2020-11-01 20:33:48 power_api.c:53:_get_avg_voltage: average_voltage = 1.124454
2020-11-01 20:33:48 power_api.c:66:check_voltage: target_vol = 19.40, actural_vol = 1.12, more than 1.0v diff.
2020-11-01 20:33:49 power_api.c:85:check_voltage_multi: retry time: 9
2020-11-01 20:33:50 power_api.c:40:_get_avg_voltage: chain = 0, voltage = 1.038119
2020-11-01 20:33:51 power_api.c:40:_get_avg_voltage: chain = 1, voltage = 1.060914
2020-11-01 20:33:52 power_api.c:40:_get_avg_voltage: chain = 2, voltage = 1.084367
2020-11-01 20:33:52 power_api.c:53:_get_avg_voltage: average_voltage = 1.061133
2020-11-01 20:33:52 power_api.c:66:check_voltage: target_vol = 19.40, actural_vol = 1.06, more than 1.0v diff.
2020-11-01 20:33:53 power_api.c:85:check_voltage_multi: retry time: 10
2020-11-01 20:33:54 power_api.c:40:_get_avg_voltage: chain = 0, voltage = 0.989835
2020-11-01 20:33:55 power_api.c:40:_get_avg_voltage: chain = 1, voltage = 1.012690
2020-11-01 20:33:56 power_api.c:40:_get_avg_voltage: chain = 2, voltage = 1.037221
2020-11-01 20:33:56 power_api.c:53:_get_avg_voltage: average_voltage = 1.013249
2020-11-01 20:33:56 power_api.c:66:check_voltage: target_vol = 19.40, actural_vol = 1.01, more than 1.0v diff.
2020-11-01 20:33:57 power_api.c:85:check_voltage_multi: retry time: 11
2020-11-01 20:33:59 power_api.c:40:_get_avg_voltage: chain = 0, voltage = 0.941550
2020-11-01 20:34:00 power_api.c:40:_get_avg_voltage: chain = 1, voltage = 0.940355
2020-11-01 20:34:01 power_api.c:40:_get_avg_voltage: chain = 2, voltage = 0.990074
2020-11-01 20:34:01 power_api.c:53:_get_avg_voltage: average_voltage = 0.957327
2020-11-01 20:34:01 power_api.c:66:check_voltage: target_vol = 19.40, actural_vol = 0.96, more than 1.0v diff.
2020-11-01 20:34:02 power_api.c:85:check_voltage_multi: retry time: 12
2020-11-01 20:34:03 power_api.c:40:_get_avg_voltage: chain = 0, voltage = 0.893266
2020-11-01 20:34:04 power_api.c:40:_get_avg_voltage: chain = 1, voltage = 0.916244
2020-11-01 20:34:05 power_api.c:40:_get_avg_voltage: chain = 2, voltage = 0.942928
2020-11-01 20:34:05 power_api.c:53:_get_avg_voltage: average_voltage = 0.917479
2020-11-01 20:34:05 power_api.c:66:check_voltage: target_vol = 19.40, actural_vol = 0.92, more than 1.0v diff.
2020-11-01 20:34:06 power_api.c:85:check_voltage_multi: retry time: 13
2020-11-01 20:34:07 power_api.c:40:_get_avg_voltage: chain = 0, voltage = 0.844981
2020-11-01 20:34:08 power_api.c:40:_get_avg_voltage: chain = 1, voltage = 0.868020
2020-11-01 20:34:09 power_api.c:40:_get_avg_voltage: chain = 2, voltage = 0.919355
2020-11-01 20:34:09 power_api.c:53:_get_avg_voltage: average_voltage = 0.877452
2020-11-01 20:34:09 power_api.c:66:check_voltage: target_vol = 19.40, actural_vol = 0.88, more than 1.0v diff.
2020-11-01 20:34:10 power_api.c:85:check_voltage_multi: retry time: 14
2020-11-01 20:34:11 power_api.c:40:_get_avg_voltage: chain = 0, voltage = 0.820839
2020-11-01 20:34:13 power_api.c:40:_get_avg_voltage: chain = 1, voltage = 0.843909
2020-11-01 20:34:14 power_api.c:40:_get_avg_voltage: chain = 2, voltage = 0.895782
2020-11-01 20:34:14 power_api.c:53:_get_avg_voltage: average_voltage = 0.853510
2020-11-01 20:34:14 power_api.c:66:check_voltage: target_vol = 19.40, actural_vol = 0.85, more than 1.0v diff.
2020-11-01 20:34:15 power_api.c:85:check_voltage_multi: retry time: 15
2020-11-01 20:34:16 power_api.c:40:_get_avg_voltage: chain = 0, voltage = 0.796696
2020-11-01 20:34:17 power_api.c:40:_get_avg_voltage: chain = 1, voltage = 0.819797
2020-11-01 20:34:18 power_api.c:40:_get_avg_voltage: chain = 2, voltage = 0.872208
2020-11-01 20:34:18 power_api.c:53:_get_avg_voltage: average_voltage = 0.829567
2020-11-01 20:34:18 power_api.c:66:check_voltage: target_vol = 19.40, actural_vol = 0.83, more than 1.0v diff.
2020-11-01 20:34:19 power_api.c:85:check_voltage_multi: retry time: 16
2020-11-01 20:34:20 power_api.c:40:_get_avg_voltage: chain = 0, voltage = 0.771574
2020-11-01 20:34:21 power_api.c:40:_get_avg_voltage: chain = 1, voltage = 0.795685
2020-11-01 20:34:22 power_api.c:40:_get_avg_voltage: chain = 2, voltage = 0.848635
2020-11-01 20:34:22 power_api.c:53:_get_avg_voltage: average_voltage = 0.805298
2020-11-01 20:34:22 power_api.c:66:check_voltage: target_vol = 19.40, actural_vol = 0.81, more than 1.0v diff.
2020-11-01 20:34:23 power_api.c:85:check_voltage_multi: retry time: 17
2020-11-01 20:34:24 power_api.c:40:_get_avg_voltage: chain = 0, voltage = 0.748412
2020-11-01 20:34:25 power_api.c:40:_get_avg_voltage: chain = 1, voltage = 0.771574
2020-11-01 20:34:26 power_api.c:40:_get_avg_voltage: chain = 2, voltage = 0.825062
2020-11-01 20:34:26 power_api.c:53:_get_avg_voltage: average_voltage = 0.781682
2020-11-01 20:34:26 power_api.c:66:check_voltage: target_vol = 19.40, actural_vol = 0.78, more than 1.0v diff.
2020-11-01 20:34:27 power_api.c:85:check_voltage_multi: retry time: 18
2020-11-01 20:34:29 power_api.c:40:_get_avg_voltage: chain = 0, voltage = 0.724269
2020-11-01 20:34:30 power_api.c:40:_get_avg_voltage: chain = 1, voltage = 0.772554
2020-11-01 20:34:31 power_api.c:40:_get_avg_voltage: chain = 2, voltage = 0.801489
2020-11-01 20:34:31 power_api.c:53:_get_avg_voltage: average_voltage = 0.766104
2020-11-01 20:34:31 power_api.c:66:check_voltage: target_vol = 19.40, actural_vol = 0.77, more than 1.0v diff.
2020-11-01 20:34:32 power_api.c:85:check_voltage_multi: retry time: 19
2020-11-01 20:34:33 power_api.c:40:_get_avg_voltage: chain = 0, voltage = 0.724269
2020-11-01 20:34:34 power_api.c:40:_get_avg_voltage: chain = 1, voltage = 0.747462
2020-11-01 20:34:35 power_api.c:40:_get_avg_voltage: chain = 2, voltage = 0.801489
2020-11-01 20:34:35 power_api.c:53:_get_avg_voltage: average_voltage = 0.757740
2020-11-01 20:34:35 power_api.c:66:check_voltage: target_vol = 19.40, actural_vol = 0.76, more than 1.0v diff.
2020-11-01 20:34:36 power_api.c:85:check_voltage_multi: retry time: 20
2020-11-01 20:34:37 power_api.c:40:_get_avg_voltage: chain = 0, voltage = 0.699239
2020-11-01 20:34:38 power_api.c:40:_get_avg_voltage: chain = 1, voltage = 0.723350
2020-11-01 20:34:39 power_api.c:40:_get_avg_voltage: chain = 2, voltage = 0.778882
2020-11-01 20:34:39 power_api.c:53:_get_avg_voltage: average_voltage = 0.733824
2020-11-01 20:34:39 power_api.c:66:check_voltage: target_vol = 19.40, actural_vol = 0.73, more than 1.0v diff.
2020-11-01 20:34:40 power_api.c:85:check_voltage_multi: retry time: 21
2020-11-01 20:34:42 power_api.c:40:_get_avg_voltage: chain = 0, voltage = 0.700127
2020-11-01 20:34:43 power_api.c:40:_get_avg_voltage: chain = 1, voltage = 0.723350
2020-11-01 20:34:44 power_api.c:40:_get_avg_voltage: chain = 2, voltage = 0.777916
2020-11-01 20:34:44 power_api.c:53:_get_avg_voltage: average_voltage = 0.733798
2020-11-01 20:34:44 power_api.c:66:check_voltage: target_vol = 19.40, actural_vol = 0.73, more than 1.0v diff.
2020-11-01 20:34:45 power_api.c:85:check_voltage_multi: retry time: 22
2020-11-01 20:34:46 power_api.c:40:_get_avg_voltage: chain = 0, voltage = 0.675127
2020-11-01 20:34:47 power_api.c:40:_get_avg_voltage: chain = 1, voltage = 0.699239
2020-11-01 20:34:48 power_api.c:40:_get_avg_voltage: chain = 2, voltage = 0.754342
2020-11-01 20:34:48 power_api.c:53:_get_avg_voltage: average_voltage = 0.709569
2020-11-01 20:34:48 power_api.c:66:check_voltage: target_vol = 19.40, actural_vol = 0.71, more than 1.0v diff.
2020-11-01 20:34:49 power_api.c:85:check_voltage_multi: retry time: 23
2020-11-01 20:34:50 power_api.c:40:_get_avg_voltage: chain = 0, voltage = 0.675985
2020-11-01 20:34:51 power_api.c:40:_get_avg_voltage: chain = 1, voltage = 0.700127
2020-11-01 20:34:52 power_api.c:40:_get_avg_voltage: chain = 2, voltage = 0.754342
2020-11-01 20:34:52 power_api.c:53:_get_avg_voltage: average_voltage = 0.710151
2020-11-01 20:34:52 power_api.c:66:check_voltage: target_vol = 19.40, actural_vol = 0.71, more than 1.0v diff.
2020-11-01 20:34:53 power_api.c:85:check_voltage_multi: retry time: 24
2020-11-01 20:34:54 power_api.c:40:_get_avg_voltage: chain = 0, voltage = 0.651842
2020-11-01 20:34:56 power_api.c:40:_get_avg_voltage: chain = 1, voltage = 0.699239
2020-11-01 20:34:57 power_api.c:40:_get_avg_voltage: chain = 2, voltage = 0.754342
2020-11-01 20:34:57 power_api.c:53:_get_avg_voltage: average_voltage = 0.701808
2020-11-01 20:34:57 power_api.c:66:check_voltage: target_vol = 19.40, actural_vol = 0.70, more than 1.0v diff.
2020-11-01 20:34:58 power_api.c:85:check_voltage_multi: retry time: 25
2020-11-01 20:34:59 power_api.c:40:_get_avg_voltage: chain = 0, voltage = 0.651842
2020-11-01 20:35:00 power_api.c:40:_get_avg_voltage: chain = 1, voltage = 0.699239
2020-11-01 20:35:01 power_api.c:40:_get_avg_voltage: chain = 2, voltage = 0.754342
2020-11-01 20:35:01 power_api.c:53:_get_avg_voltage: average_voltage = 0.701808
2020-11-01 20:35:01 power_api.c:66:check_voltage: target_vol = 19.40, actural_vol = 0.70, more than 1.0v diff.
2020-11-01 20:35:02 power_api.c:85:check_voltage_multi: retry time: 26
2020-11-01 20:35:03 power_api.c:40:_get_avg_voltage: chain = 0, voltage = 0.651842
2020-11-01 20:35:04 power_api.c:40:_get_avg_voltage: chain = 1, voltage = 0.675127
2020-11-01 20:35:05 power_api.c:40:_get_avg_voltage: chain = 2, voltage = 0.730769
2020-11-01 20:35:05 power_api.c:53:_get_avg_voltage: average_voltage = 0.685913
2020-11-01 20:35:05 power_api.c:66:check_voltage: target_vol = 19.40, actural_vol = 0.69, more than 1.0v diff.
2020-11-01 20:35:06 power_api.c:85:check_voltage_multi: retry time: 27
2020-11-01 20:35:07 power_api.c:40:_get_avg_voltage: chain = 0, voltage = 0.627700
2020-11-01 20:35:08 power_api.c:40:_get_avg_voltage: chain = 1, voltage = 0.675127
2020-11-01 20:35:09 power_api.c:40:_get_avg_voltage: chain = 2, voltage = 0.731677
2020-11-01 20:35:09 power_api.c:53:_get_avg_voltage: average_voltage = 0.678168
2020-11-01 20:35:09 power_api.c:66:check_voltage: target_vol = 19.40, actural_vol = 0.68, more than 1.0v diff.
2020-11-01 20:35:10 power_api.c:85:check_voltage_multi: retry time: 28
2020-11-01 20:35:12 power_api.c:40:_get_avg_voltage: chain = 0, voltage = 0.627700
2020-11-01 20:35:13 power_api.c:40:_get_avg_voltage: chain = 1, voltage = 0.675127
2020-11-01 20:35:14 power_api.c:40:_get_avg_voltage: chain = 2, voltage = 0.707196
2020-11-01 20:35:14 power_api.c:53:_get_avg_voltage: average_voltage = 0.670008
2020-11-01 20:35:14 power_api.c:66:check_voltage: target_vol = 19.40, actural_vol = 0.67, more than 1.0v diff.
2020-11-01 20:35:15 power_api.c:85:check_voltage_multi: retry time: 29
2020-11-01 20:35:16 power_api.c:40:_get_avg_voltage: chain = 0, voltage = 0.627700
2020-11-01 20:35:17 power_api.c:40:_get_avg_voltage: chain = 1, voltage = 0.651015
2020-11-01 20:35:18 power_api.c:40:_get_avg_voltage: chain = 2, voltage = 0.707196
2020-11-01 20:35:18 power_api.c:53:_get_avg_voltage: average_voltage = 0.661970
2020-11-01 20:35:18 power_api.c:66:check_voltage: target_vol = 19.40, actural_vol = 0.66, more than 1.0v diff.
2020-11-01 20:35:19 driver-btm-api.c:222:set_miner_status: ERROR_POWER_LOST
2020-11-01 20:35:19 driver-btm-api.c:156:stop_mining: stop mining: power set failed!
2020-11-01 20:35:19 thread.c:1419:cancel_check_miner_status_thread: cancel thread
2020-11-01 20:35:19 driver-btm-api.c:141:killall_hashboard: ****power off hashboard****
Please sign in to leave a comment.
Comments
2 comments