Antminer S19 Pro - ERROR_POWER_LOST and ERROR_SOC_INIT

Answered
Follow
Cponce7

Hi! Could someone please check this log and tell me what could be the problem? I was thinking it was the psu but I checked and the output voltage was 12 V, so I don't think that could be the problem (maybe I'm wrong?), and I don't have another S19 pro psu to check with me here, so I don't really know if that is the problem or not...

2021-04-03 15:06:12 fan_eft : 0 fan_pwm : 100
2021-04-03 15:06:12 create thread
2021-04-03 15:06:12 fixed working voltage = 1280
2021-04-03 15:06:12 Chain [0] PCB Version: 0x0100
2021-04-03 15:06:12 Chain [0] BOM Version: 0x0100
2021-04-03 15:06:12 Chain [1] PCB Version: 0x0100
2021-04-03 15:06:12 Chain [1] BOM Version: 0x0100
2021-04-03 15:06:12 Chain [2] PCB Version: 0x0100
2021-04-03 15:06:12 Chain [2] BOM Version: 0x0100
2021-04-03 15:06:16 Fan check passed.
2021-04-03 15:06:17 chain[0] PIC jump to app
2021-04-03 15:06:18 Check chain[0] PIC fw version=0x89
2021-04-03 15:06:20 chain[1] PIC jump to app
2021-04-03 15:06:21 Check chain[1] PIC fw version=0x89
2021-04-03 15:06:22 chain[2] PIC jump to app
2021-04-03 15:06:24 Check chain[2] PIC fw version=0x89
2021-04-03 15:06:24 create thread
2021-04-03 15:06:24 max sensor num = 4
2021-04-03 15:06:24 temperature_monitor_thread start...
2021-04-03 15:06:28 power type version: 0x0071
2021-04-03 15:06:28 Enter sleep to make sure power release finish.
2021-04-03 15:06:59 Slept 30 seconds, diff = 1.
2021-04-03 15:06:59 set_voltage_by_steps to 1500.
2021-04-03 15:07:05 power voltage can not meet the target
2021-04-03 15:07:07 power voltage can not meet the target
2021-04-03 15:07:09 power voltage can not meet the target
2021-04-03 15:07:09 Sweep error string = V:1.
2021-04-03 15:07:09 ERROR_POWER_LOST: get power type version failed!
2021-04-03 15:07:09 stop_mining: get power type version failed!
2021-04-03 15:07:09 uninit_temp_info
2021-04-03 15:07:09 do not read temp anymore...
2021-04-03 15:07:09 cancel thread
2021-04-03 15:07:09 cancel thread
2021-04-03 15:07:09 ****power off hashboard****
2021-04-03 15:07:12 temp monitor thread exit
2021-04-03 15:07:12 ERROR_SOC_INIT: soc init failed!
2021-04-03 15:07:12 stop_mining: soc init failed!
2021-04-03 15:07:12 ****power off hashboard****
2021-04-03 15:07:14 STATUS_OKAY
2021-04-03 15:07:14 set_start_time_point total_tv_start_sys=85 total_tv_end_sys=86

0

Comments

23 comments

Date Votes
  • Official comment
    Nick

    Dear

    We already advised your feedback in the next ticket, please double check it .

    Comment actions Permalink
  • 张衬峰

    Hello.
    You can check whether the voltage regulating cord is plugged in, the power cord is plugged in, or try to change the power supply.

    1
    Comment actions Permalink
  • Rayan Hassan

    I am also facing the same problem.. my s19 pro miner red light is always ON, and green light is always OFF.. hashing does not start… and my kernel log is also same as yours..

    Have you solved your problem? If yes.. how?

    2
    Comment actions Permalink
  • Rayan Hassan

    my kernel log is:

    CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
    Machine model: Xilinx Zynq
    cma: Reserved 16 MiB at 0x0e000000
    Memory policy: Data cache writealloc
    On node 0 totalpages: 61440
    free_area_init_node: node 0, pgdat c0b3c040, node_mem_map cde10000
    Normal zone: 480 pages used for memmap
    Normal zone: 0 pages reserved
    Normal zone: 61440 pages, LIFO batch:15
    percpu: Embedded 12 pages/cpu @cddf0000 s19916 r8192 d21044 u49152
    pcpu-alloc: s19916 r8192 d21044 u49152 alloc=12*4096
    pcpu-alloc: [0] 0 [0] 1
    Built 1 zonelists in Zone order, mobility grouping on. Total pages: 60960
    Kernel command line: mem=240M console=ttyPS0,115200 ramdisk_size=33554432 root=/dev/ram rw earlyprintk
    PID hash table entries: 1024 (order: 0, 4096 bytes)
    Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
    Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
    Memory: 209672K/245760K available (6317K kernel code, 243K rwdata, 1932K rodata, 1024K init, 232K bss, 19704K reserved, 16384K cma-reserved, 0K highmem)
    Virtual kernel memory layout:
    vector : 0xffff0000 - 0xffff1000 ( 4 kB)
    fixmap : 0xffc00000 - 0xfff00000 (3072 kB)
    vmalloc : 0xcf800000 - 0xff800000 ( 768 MB)
    lowmem : 0xc0000000 - 0xcf000000 ( 240 MB)
    pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
    modules : 0xbf000000 - 0xbfe00000 ( 14 MB)
    .text : 0xc0008000 - 0xc090e410 (9242 kB)
    .init : 0xc0a00000 - 0xc0b00000 (1024 kB)
    .data : 0xc0b00000 - 0xc0b3cda0 ( 244 kB)
    .bss : 0xc0b3cda0 - 0xc0b77024 ( 233 kB)
    Preemptible hierarchical RCU implementation.
    Build-time adjustment of leaf fanout to 32.
    RCU restricting CPUs from NR_CPUS=4 to nr_cpu_ids=2.
    RCU: Adjusting geometry for rcu_fanout_leaf=32, nr_cpu_ids=2
    NR_IRQS:16 nr_irqs:16 16
    efuse mapped to cf800000
    ps7-slcr mapped to cf802000
    L2C: platform modifies aux control register: 0x72360000 -> 0x72760000
    L2C: DT/platform modifies aux control register: 0x72360000 -> 0x72760000
    L2C-310 erratum 769419 enabled
    L2C-310 enabling early BRESP for Cortex-A9
    L2C-310 full line of zeros enabled for Cortex-A9
    L2C-310 ID prefetch enabled, offset 1 lines
    L2C-310 dynamic clock gating enabled, standby mode enabled
    L2C-310 cache controller enabled, 8 ways, 512 kB
    L2C-310: CACHE_ID 0x410000c8, AUX_CTRL 0x76760001
    zynq_clock_init: clkc starts at cf802100
    Zynq clock init
    sched_clock: 64 bits at 333MHz, resolution 3ns, wraps every 4398046511103ns
    clocksource: arm_global_timer: mask: 0xffffffffffffffff max_cycles: 0x4ce07af025, max_idle_ns: 440795209040 ns
    Switching to timer-based delay loop, resolution 3ns
    clocksource: ttc_clocksource: mask: 0xffff max_cycles: 0xffff, max_idle_ns: 537538477 ns
    ps7-ttc #0 at cf80a000, irq=18
    Console: colour dummy device 80x30
    Calibrating delay loop (skipped), value calculated using timer frequency.. 666.66 BogoMIPS (lpj=3333333)
    pid_max: default: 32768 minimum: 301
    Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
    Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
    CPU: Testing write buffer coherency: ok
    CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
    Setting up static identity map for 0x100000 - 0x100058
    CPU1: failed to boot: -1
    Brought up 1 CPUs
    SMP: Total of 1 processors activated (666.66 BogoMIPS).
    CPU: All CPU(s) started in SVC mode.
    devtmpfs: initialized
    VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 4
    clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
    pinctrl core: initialized pinctrl subsystem
    NET: Registered protocol family 16
    DMA: preallocated 256 KiB pool for atomic coherent allocations
    cpuidle: using governor menu
    hw-breakpoint: found 5 (+1 reserved) breakpoint and 1 watchpoint registers.
    hw-breakpoint: maximum watchpoint size is 4 bytes.
    zynq-ocm f800c000.ps7-ocmc: ZYNQ OCM pool: 256 KiB @ 0xcf880000
    vgaarb: loaded
    SCSI subsystem initialized
    usbcore: registered new interface driver usbfs
    usbcore: registered new interface driver hub
    usbcore: registered new device driver usb
    media: Linux media interface: v0.10
    Linux video capture interface: v2.00
    pps_core: LinuxPPS API ver. 1 registered
    pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
    PTP clock support registered
    EDAC MC: Ver: 3.0.0
    Advanced Linux Sound Architecture Driver Initialized.
    clocksource: Switched to clocksource arm_global_timer
    NET: Registered protocol family 2
    TCP established hash table entries: 2048 (order: 1, 8192 bytes)
    TCP bind hash table entries: 2048 (order: 2, 16384 bytes)
    TCP: Hash tables configured (established 2048 bind 2048)
    UDP hash table entries: 256 (order: 1, 8192 bytes)
    UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
    NET: Registered protocol family 1
    RPC: Registered named UNIX socket transport module.
    RPC: Registered udp transport module.
    RPC: Registered tcp transport module.
    RPC: Registered tcp NFSv4.1 backchannel transport module.
    PCI: CLS 0 bytes, default 64
    Trying to unpack rootfs image as initramfs...
    rootfs image is not initramfs (no cpio magic); looks like an initrd
    Freeing initrd memory: 6632K (cd480000 - cdafa000)
    hw perfevents: enabled with armv7_cortex_a9 PMU driver, 7 counters available
    futex hash table entries: 512 (order: 3, 32768 bytes)
    workingset: timestamp_bits=28 max_order=16 bucket_order=0
    jffs2: version 2.2. (NAND) (SUMMARY) © 2001-2006 Red Hat, Inc.
    io scheduler noop registered
    io scheduler deadline registered
    io scheduler cfq registered (default)
    dma-pl330 f8003000.ps7-dma: Loaded driver for PL330 DMAC-241330
    dma-pl330 f8003000.ps7-dma: DBUFF-128x8bytes Num_Chans-8 Num_Peri-4 Num_Events-16
    e0000000.serial: ttyPS0 at MMIO 0xe0000000 (irq = 159, base_baud = 6249999) is a xuartps
    console [ttyPS0] enabled
    xdevcfg f8007000.ps7-dev-cfg: ioremap 0xf8007000 to cf86e000
    [drm] Initialized drm 1.1.0 20060810
    brd: module loaded
    loop: module loaded
    CAN device driver interface
    gpiod_set_value: invalid GPIO
    libphy: MACB_mii_bus: probed
    macb e000b000.ethernet eth0: Cadence GEM rev 0x00020118 at 0xe000b000 irq 31 (00:0a:35:00:00:00)
    Generic PHY e000b000.etherne:00: attached PHY driver [Generic PHY] (mii_bus:phy_addr=e000b000.etherne:00, irq=-1)
    e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k
    e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
    ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
    ehci-pci: EHCI PCI platform driver
    usbcore: registered new interface driver usb-storage
    mousedev: PS/2 mouse device common for all mice
    i2c /dev entries driver
    cdns-i2c e0005000.ps7_i2c: 100 kHz mmio e0005000 irq 154
    Xilinx Zynq CpuIdle Driver started
    sdhci: Secure Digital Host Controller Interface driver
    sdhci: Copyright(c) Pierre Ossman
    sdhci-pltfm: SDHCI platform and OF driver helper
    mmc0: SDHCI controller on e0100000.ps7-sdio [e0100000.ps7-sdio] using ADMA
    ledtrig-cpu: registered to indicate activity on CPUs
    usbcore: registered new interface driver usbhid
    usbhid: USB HID core driver
    nand: disable subpage write
    nand: device found, Manufacturer ID: 0x2c, Chip ID: 0xda
    nand: Micron MT29F2G08ABAEAWP
    nand: 256 MiB, SLC, erase size: 128 KiB, page size: 2048, OOB size: 64
    nand: NAND_ECC_HW
    nand: NAND_ECC_HW_SYNDROME
    mtd->writesize = 2048
    ecc->strength = 1
    ecc->size = 2048
    mtd->writesize = 2048
    chip->ecc_strength_ds = 4
    chip->ecc_step_ds = 512
    nand: WARNING: pl35x-nand: the ECC used on your system is too weak compared to the one required by the NAND chip
    Bad block table found at page 131008, version 0x01
    Bad block table found at page 130944, version 0x01
    8 ofpart partitions found on MTD device pl35x-nand
    Creating 8 MTD partitions on "pl35x-nand":
    0x000000000000-0x000002800000 : "BOOT.bin-dts-marker-kernel"
    0x000002800000-0x000004800000 : "ramfs"
    0x000004800000-0x000005000000 : "configs"
    0x000005000000-0x000005200000 : "sig"
    0x000005200000-0x000006000000 : "reserve1"
    0x000006000000-0x000007000000 : "upgrade-ramfs"
    0x000007000000-0x00000a800000 : "upgrade-file"
    0x00000a800000-0x000010000000 : "reserve2"
    nf_conntrack version 0.5.0 (3635 buckets, 14540 max)
    ip_tables: (C) 2000-2006 Netfilter Core Team
    NET: Registered protocol family 10
    ip6_tables: (C) 2000-2006 Netfilter Core Team
    sit: IPv6 over IPv4 tunneling driver
    NET: Registered protocol family 17
    can: controller area network core (rev 20120528 abi 9)
    NET: Registered protocol family 29
    can: raw protocol (rev 20120528)
    can: broadcast manager protocol (rev 20120528 t)
    can: netlink gateway (rev 20130117) max_hops=1
    zynq_pm_ioremap: no compatible node found for 'xlnx,zynq-ddrc-a05'
    zynq_pm_late_init: Unable to map DDRC IO memory.
    Registering SWP/SWPB emulation handler
    hctosys: unable to open rtc device (rtc0)
    ALSA device list:
    No soundcards found.
    RAMDISK: gzip image found at block 0
    EXT4-fs (ram0): couldn't mount as ext3 due to feature incompatibilities
    EXT4-fs warning (device ram0): ext4_update_dynamic_rev:746: updating to rev 1 because of new feature flag, running e2fsck is recommended
    EXT4-fs (ram0): mounted filesystem without journal. Opts: (null)
    VFS: Mounted root (ext4 filesystem) on device 1:0.
    devtmpfs: mounted
    Freeing unused kernel memory: 1024K (c0a00000 - c0b00000)
    EXT4-fs (ram0): re-mounted. Opts: block_validity,delalloc,barrier,user_xattr,errors=remount-ro
    devpts: called with bogus options
    ubi0: attaching mtd2
    ubi0: scanning is finished
    ubi0: attached mtd2 (name "configs", size 8 MiB)
    ubi0: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes
    ubi0: min./max. I/O unit sizes: 2048/2048, sub-page size 2048
    ubi0: VID header offset: 2048 (aligned 2048), data offset: 4096
    ubi0: good PEBs: 64, bad PEBs: 0, corrupted PEBs: 0
    ubi0: user volume: 1, internal volumes: 1, max. volumes count: 128
    ubi0: max/mean erase counter: 4/1, WL threshold: 4096, image sequence number: 1735114274
    ubi0: available PEBs: 0, total reserved PEBs: 64, PEBs reserved for bad PEB handling: 4
    ubi0: background thread "ubi_bgt0d" started, PID 729
    UBIFS (ubi0:0): background thread "ubifs_bgt0_0" started, PID 733
    UBIFS (ubi0:0): UBIFS: mounted UBI device 0, volume 0, name "config_data"
    UBIFS (ubi0:0): LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
    UBIFS (ubi0:0): FS size: 5840896 bytes (5 MiB, 46 LEBs), journal size 1015809 bytes (0 MiB, 6 LEBs)
    UBIFS (ubi0:0): reserved for root: 275879 bytes (269 KiB)
    UBIFS (ubi0:0): media format: w4/r0 (latest is w4/r0), UUID E3D1C4CC-3D8C-462A-962F-A8F19AB84EF1, small LPT model
    ubi2: attaching mtd4
    ubi2: scanning is finished
    ubi2: attached mtd4 (name "reserve1", size 14 MiB)
    ubi2: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes
    ubi2: min./max. I/O unit sizes: 2048/2048, sub-page size 2048
    ubi2: VID header offset: 2048 (aligned 2048), data offset: 4096
    ubi2: good PEBs: 112, bad PEBs: 0, corrupted PEBs: 0
    ubi2: user volume: 1, internal volumes: 1, max. volumes count: 128
    ubi2: max/mean erase counter: 4/1, WL threshold: 4096, image sequence number: 1021599465
    ubi2: available PEBs: 0, total reserved PEBs: 112, PEBs reserved for bad PEB handling: 4
    ubi2: background thread "ubi_bgt2d" started, PID 740
    UBIFS (ubi2:0): background thread "ubifs_bgt2_0" started, PID 744
    UBIFS (ubi2:0): UBIFS: mounted UBI device 2, volume 0, name "misc"
    UBIFS (ubi2:0): LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
    UBIFS (ubi2:0): FS size: 11935744 bytes (11 MiB, 94 LEBs), journal size 1015809 bytes (0 MiB, 6 LEBs)
    UBIFS (ubi2:0): reserved for root: 563754 bytes (550 KiB)
    UBIFS (ubi2:0): media format: w4/r0 (latest is w4/r0), UUID CA92EC27-648C-4B56-A4B8-1DA77ECD29B6, small LPT model
    IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
    IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
    random: avahi-daemon urandom read with 2 bits of entropy available
    macb e000b000.ethernet eth0: unable to generate target frequency: 25000000 Hz
    macb e000b000.ethernet eth0: link up (100/Full)
    IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
    In axi fpga driver!
    request_mem_region OK!
    AXI fpga dev virtual address is 0xcfbc8000
    *base_vir_addr = 0xb031
    In fpga mem driver!
    request_mem_region OK!
    fpga mem virtual address is 0xd2000000
    random: nonblocking pool is initialized


    ===========================================Miner log===========================================
    1970-01-01 00:00:09 Miner compile time: Fri Dec 11 11:23:44 CST 2020 type: Antminer S19 Pro
    1970-01-01 00:00:10 This is fix-freq version
    1970-01-01 00:00:10 Miner compile time: Fri Dec 11 11:23:44 CST 2020 type: Antminer S19 Pro
    1970-01-01 00:00:10 commit version: 1821c90 2020-11-16 16:05:37, build by: jenkins 2020-12-11 11:35:43
    1970-01-01 00:00:10 opt_multi_version = 1
    1970-01-01 00:00:10 opt_bitmain_ab = 1
    1970-01-01 00:00:10 mid_auto_gen = 0
    1970-01-01 00:00:10 opt_bitmain_work_mode = 0
    1970-01-01 00:00:10 mmap fpga_mem_addr_hal = 0xb5800000
    1970-01-01 00:00:10 HASH_ON_PLUG V9 = 0x7
    1970-01-01 00:00:10 Note: front fan is power on!
    1970-01-01 00:00:10 Note: rear fan is power on!
    1970-01-01 00:00:10 start the http log.
    1970-01-01 00:00:10 httpListenThread start ret=0
    1970-01-01 00:00:10 start listen on 6060 ...
    1970-01-01 00:00:10 load machine NBP1901 conf
    1970-01-01 00:00:10 machine : NBP1901
    1970-01-01 00:00:10 chain_num 4, chain_domain_num 38, chain_asic_num 114, domain_asic_num 3
    2021-08-01 15:26:58 miner ID : 8144adc13efaa85c
    2021-08-01 15:26:58 FPGA Version = 0xB031
    2021-08-01 15:26:58 HASH_ON_PLUG V9 = 0x7
    2021-08-01 15:26:58 ==========================capability start==========================
    2021-08-01 15:26:58 board num = 3
    2021-08-01 15:26:58 board id = 0, chain num = 1
    2021-08-01 15:26:58 chain id = 0
    2021-08-01 15:26:58 board id = 1, chain num = 1
    2021-08-01 15:26:58 chain id = 1
    2021-08-01 15:26:58 board id = 2, chain num = 1
    2021-08-01 15:26:58 chain id = 2
    2021-08-01 15:26:58 ==========================capability end============================
    2021-08-01 15:26:58 chain num = 3
    2021-08-01 15:27:00 [chain 0]
    2021-08-01 15:27:00 0x0000 11 4A AB 9A 3A 36 43 67 4D BA 3F BE E4 A6 F1 9A
    2021-08-01 15:27:00 0x0010 2E FF 9B 66 25 CB 7E F0 E7 AA 31 C9 2E 58 6B F7
    2021-08-01 15:27:00 0x0020 CE E7 1E 2B 79 F4 14 D3 6C A7 26 D0 D6 50 6F C7
    2021-08-01 15:27:00 0x0030 02 D0 A4 A9 3B 52 00 4A 23 A6 99 DB C0 A2 C0 BD
    2021-08-01 15:27:00 0x0040 F6 18 A3 62 8B 16 36 09 74 F2 FF FF FF FF FF FF
    2021-08-01 15:27:00 0x0050 FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
    2021-08-01 15:27:00 0x0060 FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
    2021-08-01 15:27:00 0x0070 FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
    2021-08-01 15:27:00 0x0080 FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
    2021-08-01 15:27:00 0x0090 FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
    2021-08-01 15:27:00 0x00A0 FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
    2021-08-01 15:27:00 0x00B0 FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
    2021-08-01 15:27:00 0x00C0 FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
    2021-08-01 15:27:00 0x00D0 FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
    2021-08-01 15:27:00 0x00E0 FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
    2021-08-01 15:27:00 0x00F0 FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF 5A
    2021-08-01 15:27:00
    2021-08-01 15:27:01 [chain 1]
    2021-08-01 15:27:01 0x0000 11 4A 25 ED F3 1B 9D 20 34 6B 10 B0 02 2E 04 47
    2021-08-01 15:27:01 0x0010 76 4F 59 4B 31 D6 91 AC 3A 59 01 18 02 61 1B 9F
    2021-08-01 15:27:01 0x0020 A6 89 92 E4 CF 4C D3 4F 9E 82 35 B8 B4 CB 1D 9D
    2021-08-01 15:27:01 0x0030 EB 83 07 94 B7 C7 54 BA DB B4 7A 2B 84 77 86 58
    2021-08-01 15:27:01 0x0040 2F B4 59 47 E6 7B 17 4D C3 E0 FF FF FF FF FF FF
    2021-08-01 15:27:01 0x0050 FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
    2021-08-01 15:27:01 0x0060 FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
    2021-08-01 15:27:01 0x0070 FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
    2021-08-01 15:27:01 0x0080 FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
    2021-08-01 15:27:01 0x0090 FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
    2021-08-01 15:27:01 0x00A0 FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
    2021-08-01 15:27:01 0x00B0 FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
    2021-08-01 15:27:01 0x00C0 FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
    2021-08-01 15:27:01 0x00D0 FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
    2021-08-01 15:27:01 0x00E0 FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
    2021-08-01 15:27:01 0x00F0 FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF 5A
    2021-08-01 15:27:01
    2021-08-01 15:27:03 [chain 2]
    2021-08-01 15:27:03 0x0000 11 4A BA 64 77 4D C7 D9 18 74 A5 9C B0 42 5E AB
    2021-08-01 15:27:03 0x0010 7F CB AA 2B A1 D7 B6 C9 55 B6 E2 2E F4 C3 9B 6C
    2021-08-01 15:27:03 0x0020 21 6F 39 64 FA 3B 45 CF 9D 37 3F 3C 56 2F 2F 68
    2021-08-01 15:27:03 0x0030 CB 24 64 38 6B 77 01 55 AB DB 61 60 47 66 4D 56
    2021-08-01 15:27:03 0x0040 C3 8B C7 D4 F0 AB 9F 87 ED 1D FF FF FF FF FF FF
    2021-08-01 15:27:03 0x0050 FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
    2021-08-01 15:27:03 0x0060 FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
    2021-08-01 15:27:03 0x0070 FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
    2021-08-01 15:27:03 0x0080 FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
    2021-08-01 15:27:03 0x0090 FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
    2021-08-01 15:27:03 0x00A0 FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
    2021-08-01 15:27:03 0x00B0 FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
    2021-08-01 15:27:03 0x00C0 FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
    2021-08-01 15:27:03 0x00D0 FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
    2021-08-01 15:27:03 0x00E0 FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
    2021-08-01 15:27:03 0x00F0 FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF 5A
    2021-08-01 15:27:03
    2021-08-01 15:27:03 fan_eft : 0 fan_pwm : 100
    2021-08-01 15:27:03 create thread
    2021-08-01 15:27:03 fixed working voltage = 1280
    2021-08-01 15:27:03 Chain [0] PCB Version: 0x011e
    2021-08-01 15:27:03 Chain [0] BOM Version: 0x0100
    2021-08-01 15:27:03 Chain [1] PCB Version: 0x011e
    2021-08-01 15:27:03 Chain [1] BOM Version: 0x0100
    2021-08-01 15:27:03 Chain [2] PCB Version: 0x011e
    2021-08-01 15:27:03 Chain [2] BOM Version: 0x0100
    2021-08-01 15:27:07 Fan check passed.
    2021-08-01 15:27:08 chain[0] PIC jump to app
    2021-08-01 15:27:10 Check chain[0] PIC fw version=0x89
    2021-08-01 15:27:11 chain[1] PIC jump to app
    2021-08-01 15:27:12 Check chain[1] PIC fw version=0x89
    2021-08-01 15:27:13 chain[2] PIC jump to app
    2021-08-01 15:27:15 Check chain[2] PIC fw version=0x89
    2021-08-01 15:27:15 create thread
    2021-08-01 15:27:15 max sensor num = 4
    2021-08-01 15:27:15 temperature_monitor_thread start...
    2021-08-01 15:27:19 power type version: 0x0071
    2021-08-01 15:27:19 Enter sleep to make sure power release finish.
    2021-08-01 15:27:50 Slept 30 seconds, diff = 0.
    2021-08-01 15:27:50 set_voltage_by_steps to 1500.
    2021-08-01 15:27:56 power voltage can not meet the target
    2021-08-01 15:27:58 power voltage can not meet the target
    2021-08-01 15:28:00 power voltage can not meet the target
    2021-08-01 15:28:00 Sweep error string = V:1.
    2021-08-01 15:28:00 ERROR_POWER_LOST: get power type version failed!
    2021-08-01 15:28:00 stop_mining: get power type version failed!
    2021-08-01 15:28:00 uninit_temp_info
    2021-08-01 15:28:00 do not read temp anymore...
    2021-08-01 15:28:00 cancel thread
    2021-08-01 15:28:00 cancel thread
    2021-08-01 15:28:00 ****power off hashboard****
    2021-08-01 15:28:03 temp monitor thread exit
    2021-08-01 15:28:03 ERROR_SOC_INIT: soc init failed!
    2021-08-01 15:28:03 stop_mining: soc init failed!
    2021-08-01 15:28:03 ****power off hashboard****
    2021-08-01 15:28:04 start to init...
    2021-08-01 15:28:04 Version num 8
    2021-08-01 15:28:04 Mask num 0xe000
    2021-08-01 15:28:04 Note: addrInterval or corenum is not initialized.
    2021-08-01 15:28:05 STATUS_OKAY
    2021-08-01 15:28:05 set_start_time_point total_tv_start_sys=85 total_tv_end_sys=86

     

    please suggest me what should i do? 

    0
    Comment actions Permalink
  • Cponce7

    I just replaced the psu with a brand new one and it worked. No idea what's going on there. So, I would suggest you replace your psu to see if that solves it

    0
    Comment actions Permalink
  • Rayan Hassan

    your antminer s19 pro, red light was also always ON and green light always OFF bro?

    0
    Comment actions Permalink
  • Rayan Hassan
    • Edited

    how did you change your PSU? yourself or by someone professional...?

    because there is no official or unofficial video of replacing PSU of s19 pro on internet.. :(

    0
    Comment actions Permalink
  • Cponce7

    Don't really remember the light situation. I think the red light was flashing. 

    I changed it myself. You can do it. It's super easy. I think there's a video for the S17. It's very similar. You just have to take the covers off, disconnect the powersupply, unscrew the screws, and unhook the box. It didn't take me more than 15 min

    0
    Comment actions Permalink
  • Rayan Hassan

    okay bro thanks for your help.. i have decided to buy a new PSU and replace it with the old one.. lets see if it works for me also...

    0
    Comment actions Permalink
  • Nick

    Dear

    The ASIC can not be detected all,could you try the below instructions?

    1 Clean the dust for the antminer: How To Clean and Dust The Antminers

    https://support.bitmain.com/hc/en-us/articles/115004520173-How-To-Clean-and-Dust-The-Antminers

    2. Flash the SD card program to recover the control board.

    Please download the SD card file in the below link

    https://service.bitmain.com/support/download?product=Flashing%20SD%20card%20with%20image

    Instructions:

    https://support.bitmain.com/hc/en-us/articles/900003100743-S19-S19-Pro-control-board-program-recovery-SD-card-flashing-

     

    0
    Comment actions Permalink
  • Rayan Hassan

    whom are you telling jessica that ASIC cannot be detected? me or cponce7 ?

    0
    Comment actions Permalink
  • Rayan Hassan

    Cponce7 bro after changing PSU, we also have to factory reset the miner? also.. how is your miner now? are you again facing any kind of problem? or everything is okay till now...? 

    0
    Comment actions Permalink
  • Nick

    Dear Rayan

    What we advised to the Danish Akhtar,

    Hi Danish if still not be available please ship to our repair site to double check .

    We are sorry that your miner is defective , please unplug then reboot it again, if it still can not work please refer to this link to prepare to ship the miner or part to us :https://service.bitmain.com/support/guide


    Please check this link to create a repair ticket, please always click " apply for repair " to send the defective unit/part to us to have a repair.
    https://support.bitmain.com/hc/en-us/articles/226760527-How-to-create-revise-a-repair-ticket
    Pls send the defective miner to our official repair site(HK or US site), the address is as following link:
    https://support.bitmain.com/hc/en-us/articles/220138027-Global-repair-site-delivery-addresses
    Pls let us know if you have any problems. Thanks.

    0
    Comment actions Permalink
  • Nick

    Dear Rayan

     

    As for your kernel log if it is not available after you try all our suggestions.

    If still not be available please ship to our repair site to double check .

    We are sorry that your miner is defective , please unplug then reboot it again, if it still can not work please refer to this link to prepare to ship the miner or part to us :https://service.bitmain.com/support/guide 


    Please check this link to create a repair ticket, please always click " apply for repair " to send the defective unit/part to us to have a repair.
    https://support.bitmain.com/hc/en-us/articles/226760527-How-to-create-revise-a-repair-ticket
    Pls send the defective miner to our official repair site(HK or US site), the address is as following link: 
    https://support.bitmain.com/hc/en-us/articles/220138027-Global-repair-site-delivery-addresses
    Pls let us know if you have any problems. Thanks.

    0
    Comment actions Permalink
  • Crypto miner

    Hi Jessica,
    You send me a link of Control board recovery software ad flash. My model is S19j. Is s19 pro and and s19J has same software for control board recovery? Am I making mistake somewhere Although my machine is Brand New .

    Danish

    0
    Comment actions Permalink
  • Nick

    Dear

    Sorry S19JPRO  has no the SD card files now you can not use the other SD card files in the  S19JPRO .

    0
    Comment actions Permalink
  • Crypto miner

    Than how can we recover S19j control board program.

    0
    Comment actions Permalink
  • Nick

    Dear

    Good news, the S19JPRO SD card file is designed, could you send us your control board picture and the email address, then we will send it to you .

    0
    Comment actions Permalink
  • Rayan Hassan

    Cponce7 bro today i changed my PSU.. now my miner is working..! :D

    i have another question to ask.. after running my miner for 5 hour.. i see some hardware errors... is it normal? or there is some problem ?

    0
    Comment actions Permalink
  • Cponce7

    Awesome! I'm happy to hear that, my dude!

     

    I think the hardware error thing is normal. I'm pretty sure I read that from some Bitmain documents.... But keep checking on it to see if something looks weird! Good luck!

    0
    Comment actions Permalink
  • David Choi

    Hey Rayan Hassan, Cponce7, I have an S19a Pro that is doing the same thing. Hashrate is 0. Do you think replacing the PSU would help me in this situation?

      Normal zone: 0 pages reserved
  Normal zone: 61440 pages, LIFO batch:15
percpu: Embedded 12 pages/cpu @cddf0000 s19916 r8192 d21044 u49152
pcpu-alloc: s19916 r8192 d21044 u49152 alloc=12*4096
pcpu-alloc: [0] 0 [0] 1 
Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 60960
Kernel command line: mem=240M console=ttyPS0,115200 ramdisk_size=33554432 root=/dev/ram rw earlyprintk
PID hash table entries: 1024 (order: 0, 4096 bytes)
Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
Memory: 209668K/245760K available (6317K kernel code, 243K rwdata, 1932K rodata, 1024K init, 232K bss, 19708K reserved, 16384K cma-reserved, 0K highmem)
Virtual kernel memory layout:
    vector  : 0xffff0000 - 0xffff1000   (   4 kB)
    fixmap  : 0xffc00000 - 0xfff00000   (3072 kB)
    vmalloc : 0xcf800000 - 0xff800000   ( 768 MB)
    lowmem  : 0xc0000000 - 0xcf000000   ( 240 MB)
    pkmap   : 0xbfe00000 - 0xc0000000   (   2 MB)
    modules : 0xbf000000 - 0xbfe00000   (  14 MB)
      .text : 0xc0008000 - 0xc090e410   (9242 kB)
      .init : 0xc0a00000 - 0xc0b00000   (1024 kB)
      .data : 0xc0b00000 - 0xc0b3cda0   ( 244 kB)
       .bss : 0xc0b3cda0 - 0xc0b77024   ( 233 kB)
Preemptible hierarchical RCU implementation.
	Build-time adjustment of leaf fanout to 32.
	RCU restricting CPUs from NR_CPUS=4 to nr_cpu_ids=2.
RCU: Adjusting geometry for rcu_fanout_leaf=32, nr_cpu_ids=2
NR_IRQS:16 nr_irqs:16 16
efuse mapped to cf800000
ps7-slcr mapped to cf802000
L2C: platform modifies aux control register: 0x72360000 -> 0x72760000
L2C: DT/platform modifies aux control register: 0x72360000 -> 0x72760000
L2C-310 erratum 769419 enabled
L2C-310 enabling early BRESP for Cortex-A9
L2C-310 full line of zeros enabled for Cortex-A9
L2C-310 ID prefetch enabled, offset 1 lines
L2C-310 dynamic clock gating enabled, standby mode enabled
L2C-310 cache controller enabled, 8 ways, 512 kB
L2C-310: CACHE_ID 0x410000c8, AUX_CTRL 0x76760001
zynq_clock_init: clkc starts at cf802100
Zynq clock init
sched_clock: 64 bits at 333MHz, resolution 3ns, wraps every 4398046511103ns
clocksource: arm_global_timer: mask: 0xffffffffffffffff max_cycles: 0x4ce07af025, max_idle_ns: 440795209040 ns
Switching to timer-based delay loop, resolution 3ns
clocksource: ttc_clocksource: mask: 0xffff max_cycles: 0xffff, max_idle_ns: 537538477 ns
ps7-ttc #0 at cf80a000, irq=18
Console: colour dummy device 80x30
Calibrating delay loop (skipped), value calculated using timer frequency.. 666.66 BogoMIPS (lpj=3333333)
pid_max: default: 32768 minimum: 301
Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
CPU: Testing write buffer coherency: ok
CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
Setting up static identity map for 0x100000 - 0x100058
CPU1: failed to boot: -1
Brought up 1 CPUs
SMP: Total of 1 processors activated (666.66 BogoMIPS).
CPU: All CPU(s) started in SVC mode.
devtmpfs: initialized
VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 4
clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
pinctrl core: initialized pinctrl subsystem
NET: Registered protocol family 16
DMA: preallocated 256 KiB pool for atomic coherent allocations
cpuidle: using governor menu
hw-breakpoint: found 5 (+1 reserved) breakpoint and 1 watchpoint registers.
hw-breakpoint: maximum watchpoint size is 4 bytes.
zynq-ocm f800c000.ps7-ocmc: ZYNQ OCM pool: 256 KiB @ 0xcf880000
vgaarb: loaded
SCSI subsystem initialized
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
media: Linux media interface: v0.10
Linux video capture interface: v2.00
pps_core: LinuxPPS API ver. 1 registered
pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
PTP clock support registered
EDAC MC: Ver: 3.0.0
Advanced Linux Sound Architecture Driver Initialized.
clocksource: Switched to clocksource arm_global_timer
NET: Registered protocol family 2
TCP established hash table entries: 2048 (order: 1, 8192 bytes)
TCP bind hash table entries: 2048 (order: 2, 16384 bytes)
TCP: Hash tables configured (established 2048 bind 2048)
UDP hash table entries: 256 (order: 1, 8192 bytes)
UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
NET: Registered protocol family 1
RPC: Registered named UNIX socket transport module.
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
RPC: Registered tcp NFSv4.1 backchannel transport module.
PCI: CLS 0 bytes, default 64
Trying to unpack rootfs image as initramfs...
rootfs image is not initramfs (no cpio magic); looks like an initrd
Freeing initrd memory: 6636K (cd47e000 - cdaf9000)
hw perfevents: enabled with armv7_cortex_a9 PMU driver, 7 counters available
futex hash table entries: 512 (order: 3, 32768 bytes)
workingset: timestamp_bits=28 max_order=16 bucket_order=0
jffs2: version 2.2. (NAND) (SUMMARY)  © 2001-2006 Red Hat, Inc.
io scheduler noop registered
io scheduler deadline registered
io scheduler cfq registered (default)
dma-pl330 f8003000.ps7-dma: Loaded driver for PL330 DMAC-241330
dma-pl330 f8003000.ps7-dma: 	DBUFF-128x8bytes Num_Chans-8 Num_Peri-4 Num_Events-16
e0000000.serial: ttyPS0 at MMIO 0xe0000000 (irq = 159, base_baud = 6249999) is a xuartps
console [ttyPS0] enabled
xdevcfg f8007000.ps7-dev-cfg: ioremap 0xf8007000 to cf86e000
[drm] Initialized drm 1.1.0 20060810
brd: module loaded
loop: module loaded
CAN device driver interface
gpiod_set_value: invalid GPIO
libphy: MACB_mii_bus: probed
macb e000b000.ethernet eth0: Cadence GEM rev 0x00020118 at 0xe000b000 irq 31 (00:0a:35:00:00:00)
Generic PHY e000b000.etherne:00: attached PHY driver [Generic PHY] (mii_bus:phy_addr=e000b000.etherne:00, irq=-1)
e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k
e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci-pci: EHCI PCI platform driver
usbcore: registered new interface driver usb-storage
mousedev: PS/2 mouse device common for all mice
i2c /dev entries driver
cdns-i2c e0005000.ps7_i2c: 100 kHz mmio e0005000 irq 154
Xilinx Zynq CpuIdle Driver started
sdhci: Secure Digital Host Controller Interface driver
sdhci: Copyright(c) Pierre Ossman
sdhci-pltfm: SDHCI platform and OF driver helper
mmc0: SDHCI controller on e0100000.ps7-sdio [e0100000.ps7-sdio] using ADMA
ledtrig-cpu: registered to indicate activity on CPUs
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
nand: disable subpage write
nand: device found, Manufacturer ID: 0x2c, Chip ID: 0xda
nand: Micron MT29F2G08ABAEAWP
nand: 256 MiB, SLC, erase size: 128 KiB, page size: 2048, OOB size: 64
nand: NAND_ECC_HW
nand: NAND_ECC_HW_SYNDROME
mtd->writesize = 2048
ecc->strength = 1
ecc->size = 2048
mtd->writesize = 2048
chip->ecc_strength_ds = 4
chip->ecc_step_ds = 512
nand: WARNING: pl35x-nand: the ECC used on your system is too weak compared to the one required by the NAND chip
Bad block table found at page 131008, version 0x01
Bad block table found at page 130944, version 0x01
nand_read_bbt: bad block at 0x000002420000
nand_read_bbt: bad block at 0x000002440000
nand_read_bbt: bad block at 0x000002460000
8 ofpart partitions found on MTD device pl35x-nand
Creating 8 MTD partitions on "pl35x-nand":
0x000000000000-0x000002800000 : "BOOT.bin-dts-marker-kernel"
0x000002800000-0x000004800000 : "ramfs"
0x000004800000-0x000005000000 : "configs"
0x000005000000-0x000005200000 : "sig"
0x000005200000-0x000006000000 : "reserve1"
0x000006000000-0x000007000000 : "upgrade-ramfs"
0x000007000000-0x00000a800000 : "upgrade-file"
0x00000a800000-0x000010000000 : "reserve2"
nf_conntrack version 0.5.0 (3635 buckets, 14540 max)
ip_tables: (C) 2000-2006 Netfilter Core Team
NET: Registered protocol family 10
ip6_tables: (C) 2000-2006 Netfilter Core Team
sit: IPv6 over IPv4 tunneling driver
NET: Registered protocol family 17
can: controller area network core (rev 20120528 abi 9)
NET: Registered protocol family 29
can: raw protocol (rev 20120528)
can: broadcast manager protocol (rev 20120528 t)
can: netlink gateway (rev 20130117) max_hops=1
zynq_pm_ioremap: no compatible node found for 'xlnx,zynq-ddrc-a05'
zynq_pm_late_init: Unable to map DDRC IO memory.
Registering SWP/SWPB emulation handler
hctosys: unable to open rtc device (rtc0)
ALSA device list:
  No soundcards found.
RAMDISK: gzip image found at block 0
EXT4-fs (ram0): couldn't mount as ext3 due to feature incompatibilities
EXT4-fs warning (device ram0): ext4_update_dynamic_rev:746: updating to rev 1 because of new feature flag, running e2fsck is recommended
EXT4-fs (ram0): mounted filesystem without journal. Opts: (null)
VFS: Mounted root (ext4 filesystem) on device 1:0.
devtmpfs: mounted
Freeing unused kernel memory: 1024K (c0a00000 - c0b00000)
EXT4-fs (ram0): re-mounted. Opts: block_validity,delalloc,barrier,user_xattr,errors=remount-ro
devpts: called with bogus options
ubi0: attaching mtd2
ubi0: scanning is finished
ubi0: attached mtd2 (name "configs", size 8 MiB)
ubi0: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes
ubi0: min./max. I/O unit sizes: 2048/2048, sub-page size 2048
ubi0: VID header offset: 2048 (aligned 2048), data offset: 4096
ubi0: good PEBs: 64, bad PEBs: 0, corrupted PEBs: 0
ubi0: user volume: 1, internal volumes: 1, max. volumes count: 128
ubi0: max/mean erase counter: 3/1, WL threshold: 4096, image sequence number: 1887179327
ubi0: available PEBs: 0, total reserved PEBs: 64, PEBs reserved for bad PEB handling: 4
ubi0: background thread "ubi_bgt0d" started, PID 729
UBIFS (ubi0:0): background thread "ubifs_bgt0_0" started, PID 733
UBIFS (ubi0:0): recovery needed
UBIFS (ubi0:0): recovery completed
UBIFS (ubi0:0): UBIFS: mounted UBI device 0, volume 0, name "config_data"
UBIFS (ubi0:0): LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
UBIFS (ubi0:0): FS size: 5840896 bytes (5 MiB, 46 LEBs), journal size 1015809 bytes (0 MiB, 6 LEBs)
UBIFS (ubi0:0): reserved for root: 275879 bytes (269 KiB)
UBIFS (ubi0:0): media format: w4/r0 (latest is w4/r0), UUID D552F020-5F5C-4570-92AB-8DAAEA8A1D39, small LPT model
ubi2: attaching mtd4
ubi2: scanning is finished
ubi2: attached mtd4 (name "reserve1", size 14 MiB)
ubi2: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes
ubi2: min./max. I/O unit sizes: 2048/2048, sub-page size 2048
ubi2: VID header offset: 2048 (aligned 2048), data offset: 4096
ubi2: good PEBs: 112, bad PEBs: 0, corrupted PEBs: 0
ubi2: user volume: 1, internal volumes: 1, max. volumes count: 128
ubi2: max/mean erase counter: 3/1, WL threshold: 4096, image sequence number: 3755559332
ubi2: available PEBs: 0, total reserved PEBs: 112, PEBs reserved for bad PEB handling: 4
ubi2: background thread "ubi_bgt2d" started, PID 740
UBIFS (ubi2:0): background thread "ubifs_bgt2_0" started, PID 744
UBIFS (ubi2:0): recovery needed
UBIFS (ubi2:0): recovery completed
UBIFS (ubi2:0): UBIFS: mounted UBI device 2, volume 0, name "misc"
UBIFS (ubi2:0): LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
UBIFS (ubi2:0): FS size: 11935744 bytes (11 MiB, 94 LEBs), journal size 1015809 bytes (0 MiB, 6 LEBs)
UBIFS (ubi2:0): reserved for root: 563754 bytes (550 KiB)
UBIFS (ubi2:0): media format: w4/r0 (latest is w4/r0), UUID 4797DD4F-AE0D-410E-8EFF-1E91649A3869, small LPT model
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
random: avahi-daemon urandom read with 2 bits of entropy available
macb e000b000.ethernet eth0: unable to generate target frequency: 25000000 Hz
macb e000b000.ethernet eth0: link up (100/Full)
IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
In axi fpga driver!
request_mem_region OK!
AXI fpga dev virtual address is 0xcfbc8000
*base_vir_addr = 0xb031
In fpga mem driver!
request_mem_region OK!
fpga mem virtual address is 0xd2000000
random: nonblocking pool is initialized


===========================================Miner log===========================================
1970-01-01 00:00:09 Miner compile time: Sat Jul 24 14:04:45 CST 2021 type: Antminer S19a
1970-01-01 00:00:10 This is fix-freq version
1970-01-01 00:00:10 Miner compile time: Sat Jul 24 14:04:45 CST 2021 type: Antminer S19a
1970-01-01 00:00:10 commit version: db12feb 2021-05-12 15:03:10, build by: jenkins 2021-07-24 14:16:14
1970-01-01 00:00:10 opt_multi_version     = 1
1970-01-01 00:00:10 opt_bitmain_ab        = 1
1970-01-01 00:00:10 mid_auto_gen          = 0
1970-01-01 00:00:10 opt_bitmain_work_mode = 0
1970-01-01 00:00:10 mmap fpga_mem_addr_hal = 0xb5800000
1970-01-01 00:00:10 HASH_ON_PLUG V9 = 0x7
1970-01-01 00:00:10 Note: front fan is power on!
1970-01-01 00:00:10 Note: rear fan is power on!
1970-01-01 00:00:10 start the http log.
1970-01-01 00:00:10 httpListenThread start ret=0
1970-01-01 00:00:10 start listen on 6060 ...
1970-01-01 00:00:10 load machine BHB28611 conf
1970-01-01 00:00:10 machine : BHB28611 
1970-01-01 00:00:10 chain_num 4, chain_domain_num 9, chain_asic_num 72, domain_asic_num 8
1970-01-01 00:00:10 asic 23, wind 0, y 8
1970-01-01 00:00:10 air in
1970-01-01 00:00:10 asic 56, wind 0, y 8
1970-01-01 00:00:10 air in
1970-01-01 00:00:10 asic 16, wind 0, y 1
1970-01-01 00:00:10 air out
1970-01-01 00:00:10 asic 63, wind 0, y 1
1970-01-01 00:00:10 air out
2022-01-22 23:18:55 miner ID : 800a34093efaa85c
2022-01-22 23:18:55 FPGA Version = 0xB031
2022-01-22 23:18:55 HASH_ON_PLUG V9 = 0x7
2022-01-22 23:18:55 ==========================capability start==========================
2022-01-22 23:18:55 board num = 3
2022-01-22 23:18:55 board id = 0, chain num = 1
2022-01-22 23:18:55 	chain id = 0
2022-01-22 23:18:55 board id = 1, chain num = 1
2022-01-22 23:18:55 	chain id = 1
2022-01-22 23:18:55 board id = 2, chain num = 1
2022-01-22 23:18:55 	chain id = 2
2022-01-22 23:18:55 ==========================capability end============================
2022-01-22 23:18:55 chain num = 3
2022-01-22 23:18:57 [chain 0]
2022-01-22 23:18:57 0x0000 11 52 D6 72 E5 D2 47 14   06 B0 D4 58 B1 46 4A 05 
2022-01-22 23:18:57 0x0010 2E 66 92 81 36 39 93 62   86 9F 2B 49 C2 25 26 39 
2022-01-22 23:18:57 0x0020 E1 C3 BA C4 A2 CC B8 EF   C1 AE 44 49 28 2C C6 49 
2022-01-22 23:18:57 0x0030 D0 0B 1C 1B D9 A8 93 22   E7 19 C9 7C 93 39 8B 4D 
2022-01-22 23:18:57 0x0040 66 8F 0D 18 0C D6 A3 AB   C5 2E 6A B7 32 5A E1 B8 
2022-01-22 23:18:57 0x0050 E9 C9 FF FF FF FF FF FF   FF FF FF FF FF FF FF FF 
2022-01-22 23:18:57 0x0060 FF FF FF FF FF FF FF FF   FF FF FF FF FF FF FF FF 
2022-01-22 23:18:57 0x0070 FF FF FF FF FF FF FF FF   FF FF FF FF FF FF FF FF 
2022-01-22 23:18:57 0x0080 FF FF FF FF FF FF FF FF   FF FF FF FF FF FF FF FF 
2022-01-22 23:18:57 0x0090 FF FF FF FF FF FF FF FF   FF FF FF FF FF FF FF FF 
2022-01-22 23:18:57 0x00A0 FF FF FF FF FF FF FF FF   FF FF FF FF FF FF FF FF 
2022-01-22 23:18:57 0x00B0 FF FF FF FF FF FF FF FF   FF FF FF FF FF FF FF FF 
2022-01-22 23:18:57 0x00C0 FF FF FF FF FF FF FF FF   FF FF FF FF FF FF FF FF 
2022-01-22 23:18:57 0x00D0 FF FF FF FF FF FF FF FF   FF FF FF FF FF FF FF FF 
2022-01-22 23:18:57 0x00E0 FF FF FF FF FF FF FF FF   FF FF FF FF FF FF FF FF 
2022-01-22 23:18:57 0x00F0 FF FF FF FF FF FF FF FF   FF FF FF FF FF FF FF 5A 
2022-01-22 23:18:57 
2022-01-22 23:18:59 [chain 1]
2022-01-22 23:18:59 0x0000 11 52 B5 5E 53 11 DA 16   7A 66 B6 2B 41 A6 F9 C3 
2022-01-22 23:18:59 0x0010 21 4F 7F FA 5A 40 82 61   03 52 01 CC A7 34 98 9E 
2022-01-22 23:18:59 0x0020 8F B6 9C EE ED 92 B5 7D   F7 06 FE F1 8D 29 88 6A 
2022-01-22 23:18:59 0x0030 51 10 FA C8 D2 49 62 08   F6 C8 F1 C7 BA D3 A3 85 
2022-01-22 23:18:59 0x0040 5E 2F 03 2F CF 51 66 E0   C2 CD C3 7E 67 2F 52 4C 
2022-01-22 23:18:59 0x0050 B7 2D FF FF FF FF FF FF   FF FF FF FF FF FF FF FF 
2022-01-22 23:18:59 0x0060 FF FF FF FF FF FF FF FF   FF FF FF FF FF FF FF FF 
2022-01-22 23:18:59 0x0070 FF FF FF FF FF FF FF FF   FF FF FF FF FF FF FF FF 
2022-01-22 23:18:59 0x0080 FF FF FF FF FF FF FF FF   FF FF FF FF FF FF FF FF 
2022-01-22 23:18:59 0x0090 FF FF FF FF FF FF FF FF   FF FF FF FF FF FF FF FF 
2022-01-22 23:18:59 0x00A0 FF FF FF FF FF FF FF FF   FF FF FF FF FF FF FF FF 
2022-01-22 23:18:59 0x00B0 FF FF FF FF FF FF FF FF   FF FF FF FF FF FF FF FF 
2022-01-22 23:18:59 0x00C0 FF FF FF FF FF FF FF FF   FF FF FF FF FF FF FF FF 
2022-01-22 23:18:59 0x00D0 FF FF FF FF FF FF FF FF   FF FF FF FF FF FF FF FF 
2022-01-22 23:18:59 0x00E0 FF FF FF FF FF FF FF FF   FF FF FF FF FF FF FF FF 
2022-01-22 23:18:59 0x00F0 FF FF FF FF FF FF FF FF   FF FF FF FF FF FF FF 5A 
2022-01-22 23:18:59 
2022-01-22 23:19:00 [chain 2]
2022-01-22 23:19:00 0x0000 11 52 9A 85 DA 15 CC E1   0F E9 3B F4 9D BB AA C2 
2022-01-22 23:19:00 0x0010 EF F3 00 CC 37 47 E5 8B   9F 6C 6F 48 45 58 BB D5 
2022-01-22 23:19:00 0x0020 8C 43 99 6E DB D8 58 9C   19 95 C5 02 5A 86 FC 4E 
2022-01-22 23:19:00 0x0030 DD 3C A4 B6 ED 3F 1C 8F   A4 17 6E DB CF C6 7E A1 
2022-01-22 23:19:00 0x0040 80 3E A9 B7 F0 CF 7D 30   78 68 01 56 34 B2 48 E4 
2022-01-22 23:19:00 0x0050 7E B6 FF FF FF FF FF FF   FF FF FF FF FF FF FF FF 
2022-01-22 23:19:00 0x0060 FF FF FF FF FF FF FF FF   FF FF FF FF FF FF FF FF 
2022-01-22 23:19:00 0x0070 FF FF FF FF FF FF FF FF   FF FF FF FF FF FF FF FF 
2022-01-22 23:19:00 0x0080 FF FF FF FF FF FF FF FF   FF FF FF FF FF FF FF FF 
2022-01-22 23:19:00 0x0090 FF FF FF FF FF FF FF FF   FF FF FF FF FF FF FF FF 
2022-01-22 23:19:00 0x00A0 FF FF FF FF FF FF FF FF   FF FF FF FF FF FF FF FF 
2022-01-22 23:19:00 0x00B0 FF FF FF FF FF FF FF FF   FF FF FF FF FF FF FF FF 
2022-01-22 23:19:00 0x00C0 FF FF FF FF FF FF FF FF   FF FF FF FF FF FF FF FF 
2022-01-22 23:19:00 0x00D0 FF FF FF FF FF FF FF FF   FF FF FF FF FF FF FF FF 
2022-01-22 23:19:00 0x00E0 FF FF FF FF FF FF FF FF   FF FF FF FF FF FF FF FF 
2022-01-22 23:19:00 0x00F0 FF FF FF FF FF FF FF FF   FF FF FF FF FF FF FF 5A 
2022-01-22 23:19:00 
2022-01-22 23:19:00 fan_eft : 0  fan_pwm : 100
2022-01-22 23:19:00 create thread
2022-01-22 23:19:00 fixed working voltage = -1
2022-01-22 23:19:00 Chain [0] PCB Version: 0x0100
2022-01-22 23:19:00 Chain [0] BOM Version: 0x0100
2022-01-22 23:19:00 Chain [1] PCB Version: 0x0100
2022-01-22 23:19:00 Chain [1] BOM Version: 0x0100
2022-01-22 23:19:00 Chain [2] PCB Version: 0x0100
2022-01-22 23:19:00 Chain [2] BOM Version: 0x0100
2022-01-22 23:19:04 Fan check passed.
2022-01-22 23:19:05 chain[0] PIC jump to app
2022-01-22 23:19:07 Check chain[0] PIC fw version=0xfe
2022-01-22 23:19:08 chain[1] PIC jump to app
2022-01-22 23:19:09 Check chain[1] PIC fw version=0xfe
2022-01-22 23:19:11 chain[2] PIC jump to app
2022-01-22 23:19:12 Check chain[2] PIC fw version=0xfe
2022-01-22 23:19:12 create thread
2022-01-22 23:19:12 max sensor num = 4
2022-01-22 23:19:12 temperature_monitor_thread start...
2022-01-22 23:19:17 power type version: 0x0071
2022-01-22 23:19:17 Enter sleep to make sure power release finish.
2022-01-22 23:19:48 Slept 30 seconds, diff = 0.
2022-01-22 23:19:48 set_voltage_by_steps to 1500.
2022-01-22 23:19:53 start up min temp by 75a = 255
2022-01-22 23:19:53 set UART baud to 115200
2022-01-22 23:19:55 chain avg vol rise to 15.12
2022-01-22 23:20:01 Chain[0]: find 100 asic, times 0
2022-01-22 23:20:09 Chain[0]: find 100 asic, times 1
2022-01-22 23:20:17 Chain[0]: find 100 asic, times 2
2022-01-22 23:20:17 Chain 0 only find 100 asic, will power off hash board 0
2022-01-22 23:20:19 chain avg vol rise to 22.70
2022-01-22 23:20:25 Chain[1]: find 100 asic, times 0
2022-01-22 23:20:31 chain avg vol drop to 15.11
2022-01-22 23:20:33 Chain[1]: find 100 asic, times 1
2022-01-22 23:20:41 Chain[1]: find 100 asic, times 2
2022-01-22 23:20:41 Chain 1 only find 100 asic, will power off hash board 1
2022-01-22 23:20:43 chain avg vol rise to 30.27
2022-01-22 23:20:49 Chain[2]: find 100 asic, times 0
2022-01-22 23:20:54 chain avg vol drop to 15.09
2022-01-22 23:20:57 Chain[2]: find 100 asic, times 1
2022-01-22 23:21:05 Chain[2]: find 100 asic, times 2
2022-01-22 23:21:06 Chain 2 only find 100 asic, will power off hash board 2
2022-01-22 23:21:06 ERROR_SOC_INIT: soc init failed!
2022-01-22 23:21:06 stop_mining: soc init failed!
2022-01-22 23:21:06 uninit_temp_info
2022-01-22 23:21:06 do not read temp anymore...
2022-01-22 23:21:06 cancel thread
2022-01-22 23:21:06 cancel thread
2022-01-22 23:21:06 ****power off hashboard****
2022-01-22 23:21:06 temp monitor thread exit
2022-01-22 23:21:07 STATUS_OKAY
2022-01-22 23:21:07 set_start_time_point total_tv_start_sys=149 total_tv_end_sys=150
2022-01-22 23:21:08 start to init...
2022-01-22 23:21:08 Version num 8
2022-01-22 23:21:08 Mask num 0xe000
2022-01-22 23:21:08 Note: addrInterval or corenum is not initialized.
2022-01-22 23:28:02 reload pool, need recalculate
2022-01-22 23:28:02 set_start_time_point total_tv_start_sys=564 total_tv_end_sys=565
    0
    Comment actions Permalink
  • Cponce7

    I think you should definitely try changing the PSU. That's how I fixed my problem.

    In my case I didn't think it was the PSU because I was checking the PSU's output voltage and it seemed fine. But I got a new one and that did the trick! It solved the problem right away.

    So yea, definitely try changing the PSU

    0
    Comment actions Permalink
  • Linda

    Hi, if the problem still exits, please contact us at support-cs@bitmain.com to provide the updated kernel log.

    0
    Comment actions Permalink

Please sign in to leave a comment.

Didn't find what you were looking for?

New post