ERROR_TEMP_LOST

i2c /dev entries driver
Xilinx Zynq CpuIdle Driver started
sdhci: Secure Digital Host Controller Interface driver
sdhci: Copyright(c) Pierre Ossman
sdhci-pltfm: SDHCI platform and OF driver helper
mmc0: SDHCI controller on e0100000.ps7-sdio [e0100000.ps7-sdio] using ADMA
ledtrig-cpu: registered to indicate activity on CPUs
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
nand: device found, Manufacturer ID: 0xc2, Chip ID: 0xda
nand: Macronix MX30LF2GE8AB
nand: 256 MiB, SLC, erase size: 128 KiB, page size: 2048, OOB size: 64
Bad block table found at page 131008, version 0x01
Bad block table found at page 130944, version 0x01
nand_read_bbt: bad block at 0x00000ff60000
nand_read_bbt: bad block at 0x00000ff80000
nand_read_bbt: bad block at 0x00000ffa0000
nand_read_bbt: bad block at 0x00000ffc0000
6 ofpart partitions found on MTD device pl35x-nand
Creating 6 MTD partitions on "pl35x-nand":
0x000000000000-0x000002800000 : "BOOT.bin-env-dts-kernel"
0x000002800000-0x000004800000 : "ramfs"
0x000004800000-0x000005000000 : "configs"
0x000005000000-0x000006000000 : "reserve"
0x000006000000-0x000008000000 : "ramfs-bak"
0x000008000000-0x000010000000 : "reserve1"
NET: Registered protocol family 10
sit: IPv6 over IPv4 tunneling driver
NET: Registered protocol family 17
can: controller area network core (rev 20120528 abi 9)
NET: Registered protocol family 29
can: raw protocol (rev 20120528)
can: broadcast manager protocol (rev 20120528 t)
can: netlink gateway (rev 20130117) max_hops=1
zynq_pm_ioremap: no compatible node found for 'xlnx,zynq-ddrc-a05'
zynq_pm_late_init: Unable to map DDRC IO memory.
Registering SWP/SWPB emulation handler
hctosys: unable to open rtc device (rtc0)
ALSA device list:
No soundcards found.
RAMDISK: gzip image found at block 0
EXT4-fs (ram0): couldn't mount as ext3 due to feature incompatibilities
EXT4-fs (ram0): mounted filesystem without journal. Opts: (null)
VFS: Mounted root (ext4 filesystem) on device 1:0.
devtmpfs: mounted
Freeing unused kernel memory: 1024K (c0a00000 - c0b00000)
EXT4-fs (ram0): re-mounted. Opts: block_validity,delalloc,barrier,user_xattr
random: dd urandom read with 0 bits of entropy available
ubi0: attaching mtd2
ubi0 warning: ubi_io_read: error -74 (ECC error) while reading 64 bytes from PEB 29:0, read only 64 bytes, retry
ubi0 warning: ubi_io_read: error -74 (ECC error) while reading 64 bytes from PEB 29:0, read only 64 bytes, retry
ubi0 warning: ubi_io_read: error -74 (ECC error) while reading 64 bytes from PEB 29:0, read only 64 bytes, retry
ubi0 error: ubi_io_read: error -74 (ECC error) while reading 64 bytes from PEB 29:0, read 64 bytes
CPU: 0 PID: 705 Comm: ubiattach Not tainted 4.6.0-xilinx-gff8137b-dirty #25
Hardware name: Xilinx Zynq Platform
[<c010e718>] (unwind_backtrace) from [<c010a8d0>] (show_stack+0x10/0x14)
[<c010a8d0>] (show_stack) from [<c02fcea4>] (dump_stack+0x84/0xa4)
[<c02fcea4>] (dump_stack) from [<c0405d64>] (ubi_io_read+0x1d4/0x2a8)
[<c0405d64>] (ubi_io_read) from [<c0406050>] (ubi_io_read_ec_hdr+0x68/0x1cc)
[<c0406050>] (ubi_io_read_ec_hdr) from [<c040a1d4>] (ubi_attach+0x130/0x1194)
[<c040a1d4>] (ubi_attach) from [<c0400b28>] (ubi_attach_mtd_dev+0x62c/0xaf8)
[<c0400b28>] (ubi_attach_mtd_dev) from [<c0401ff8>] (ctrl_cdev_ioctl+0xf0/0x1ec)
[<c0401ff8>] (ctrl_cdev_ioctl) from [<c01d6b88>] (vfs_ioctl+0x20/0x34)
[<c01d6b88>] (vfs_ioctl) from [<c01d7488>] (do_vfs_ioctl+0x7d8/0x8b0)
[<c01d7488>] (do_vfs_ioctl) from [<c01d7594>] (SyS_ioctl+0x34/0x5c)
[<c01d7594>] (SyS_ioctl) from [<c0106f00>] (ret_fast_syscall+0x0/0x3c)
ubi0 warning: ubi_io_read: error -74 (ECC error) while reading 512 bytes from PEB 29:512, read only 512 bytes, retry
ubi0 warning: ubi_io_read: error -74 (ECC error) while reading 512 bytes from PEB 29:512, read only 512 bytes, retry
ubi0 warning: ubi_io_read: error -74 (ECC error) while reading 512 bytes from PEB 29:512, read only 512 bytes, retry
ubi0 error: ubi_io_read: error -74 (ECC error) while reading 512 bytes from PEB 29:512, read 512 bytes
CPU: 0 PID: 705 Comm: ubiattach Not tainted 4.6.0-xilinx-gff8137b-dirty #25
Hardware name: Xilinx Zynq Platform
[<c010e718>] (unwind_backtrace) from [<c010a8d0>] (show_stack+0x10/0x14)
[<c010a8d0>] (show_stack) from [<c02fcea4>] (dump_stack+0x84/0xa4)
[<c02fcea4>] (dump_stack) from [<c0405d64>] (ubi_io_read+0x1d4/0x2a8)
[<c0405d64>] (ubi_io_read) from [<c0406220>] (ubi_io_read_vid_hdr+0x6c/0x1d8)
[<c0406220>] (ubi_io_read_vid_hdr) from [<c040a290>] (ubi_attach+0x1ec/0x1194)
[<c040a290>] (ubi_attach) from [<c0400b28>] (ubi_attach_mtd_dev+0x62c/0xaf8)
[<c0400b28>] (ubi_attach_mtd_dev) from [<c0401ff8>] (ctrl_cdev_ioctl+0xf0/0x1ec)
[<c0401ff8>] (ctrl_cdev_ioctl) from [<c01d6b88>] (vfs_ioctl+0x20/0x34)
[<c01d6b88>] (vfs_ioctl) from [<c01d7488>] (do_vfs_ioctl+0x7d8/0x8b0)
[<c01d7488>] (do_vfs_ioctl) from [<c01d7594>] (SyS_ioctl+0x34/0x5c)
[<c01d7594>] (SyS_ioctl) from [<c0106f00>] (ret_fast_syscall+0x0/0x3c)
ubi0: scanning is finished
ubi0: attached mtd2 (name "configs", size 8 MiB)
ubi0: PEB size: 131072 bytes (128 KiB), LEB size: 129024 bytes
ubi0: min./max. I/O unit sizes: 2048/2048, sub-page size 512
ubi0: VID header offset: 512 (aligned 512), data offset: 2048
ubi0: good PEBs: 64, bad PEBs: 0, corrupted PEBs: 0
ubi0: user volume: 1, internal volumes: 1, max. volumes count: 128
ubi0: max/mean erase counter: 2/1, WL threshold: 4096, image sequence number: 661206203
ubi0: available PEBs: 0, total reserved PEBs: 64, PEBs reserved for bad PEB handling: 40
ubi0: background thread "ubi_bgt0d" started, PID 708
ubi0 warning: ubi_io_read: error -74 (ECC error) while reading 512 bytes from PEB 29:512, read only 512 bytes, retry
UBIFS (ubi0:0): background thread "ubifs_bgt0_0" started, PID 711
ubi0 warning: ubi_io_read: error -74 (ECC error) while reading 512 bytes from PEB 29:512, read only 512 bytes, retry
ubi0 warning: ubi_io_read: error -74 (ECC error) while reading 512 bytes from PEB 29:512, read only 512 bytes, retry
ubi0 error: ubi_io_read: error -74 (ECC error) while reading 512 bytes from PEB 29:512, read 512 bytes
CPU: 0 PID: 708 Comm: ubi_bgt0d Not tainted 4.6.0-xilinx-gff8137b-dirty #25
Hardware name: Xilinx Zynq Platform
[<c010e718>] (unwind_backtrace) from [<c010a8d0>] (show_stack+0x10/0x14)
[<c010a8d0>] (show_stack) from [<c02fcea4>] (dump_stack+0x84/0xa4)
[<c02fcea4>] (dump_stack) from [<c0405d64>] (ubi_io_read+0x1d4/0x2a8)
[<c0405d64>] (ubi_io_read) from [<c0406220>] (ubi_io_read_vid_hdr+0x6c/0x1d8)
[<c0406220>] (ubi_io_read_vid_hdr) from [<c0408280>] (wear_leveling_worker+0x1e0/0x6a0)
[<c0408280>] (wear_leveling_worker) from [<c0407770>] (do_work+0xcc/0x100)
[<c0407770>] (do_work) from [<c0408dc8>] (ubi_thread+0x100/0x190)
[<c0408dc8>] (ubi_thread) from [<c0132960>] (kthread+0xdc/0xf0)
[<c0132960>] (kthread) from [<c0106fb8>] (ret_from_fork+0x14/0x3c)
UBIFS (ubi0:0): UBIFS: mounted UBI device 0, volume 0, name "configs"
UBIFS (ubi0:0): LEB size: 129024 bytes (126 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
UBIFS (ubi0:0): FS size: 1419264 bytes (1 MiB, 11 LEBs), journal size 903169 bytes (0 MiB, 5 LEBs)
UBIFS (ubi0:0): reserved for root: 67035 bytes (65 KiB)
UBIFS (ubi0:0): media format: w4/r0 (latest is w4/r0), UUID C7F097ED-13CE-4DAC-BAE5-1549CE333C7C, small LPT model
ubi1: attaching mtd5
ubi0: scrubbed PEB 29 (LEB 0:10), data moved to PEB 31
ubi1 warning: ubi_io_read: error -74 (ECC error) while reading 64 bytes from PEB 48:0, read only 64 bytes, retry
ubi1 warning: ubi_io_read: error -74 (ECC error) while reading 64 bytes from PEB 48:0, read only 64 bytes, retry
ubi1 warning: ubi_io_read: error -74 (ECC error) while reading 64 bytes from PEB 48:0, read only 64 bytes, retry
ubi1 error: ubi_io_read: error -74 (ECC error) while reading 64 bytes from PEB 48:0, read 64 bytes
CPU: 0 PID: 717 Comm: ubiattach Not tainted 4.6.0-xilinx-gff8137b-dirty #25
Hardware name: Xilinx Zynq Platform
[<c010e718>] (unwind_backtrace) from [<c010a8d0>] (show_stack+0x10/0x14)
[<c010a8d0>] (show_stack) from [<c02fcea4>] (dump_stack+0x84/0xa4)
[<c02fcea4>] (dump_stack) from [<c0405d64>] (ubi_io_read+0x1d4/0x2a8)
[<c0405d64>] (ubi_io_read) from [<c0406050>] (ubi_io_read_ec_hdr+0x68/0x1cc)
[<c0406050>] (ubi_io_read_ec_hdr) from [<c040a1d4>] (ubi_attach+0x130/0x1194)
[<c040a1d4>] (ubi_attach) from [<c0400b28>] (ubi_attach_mtd_dev+0x62c/0xaf8)
[<c0400b28>] (ubi_attach_mtd_dev) from [<c0401ff8>] (ctrl_cdev_ioctl+0xf0/0x1ec)
[<c0401ff8>] (ctrl_cdev_ioctl) from [<c01d6b88>] (vfs_ioctl+0x20/0x34)
[<c01d6b88>] (vfs_ioctl) from [<c01d7488>] (do_vfs_ioctl+0x7d8/0x8b0)
[<c01d7488>] (do_vfs_ioctl) from [<c01d7594>] (SyS_ioctl+0x34/0x5c)
[<c01d7594>] (SyS_ioctl) from [<c0106f00>] (ret_fast_syscall+0x0/0x3c)
ubi1 warning: ubi_io_read: error -74 (ECC error) while reading 512 bytes from PEB 48:512, read only 512 bytes, retry
ubi1 warning: ubi_io_read: error -74 (ECC error) while reading 512 bytes from PEB 48:512, read only 512 bytes, retry
ubi1 warning: ubi_io_read: error -74 (ECC error) while reading 512 bytes from PEB 48:512, read only 512 bytes, retry
ubi1 error: ubi_io_read: error -74 (ECC error) while reading 512 bytes from PEB 48:512, read 512 bytes
CPU: 0 PID: 717 Comm: ubiattach Not tainted 4.6.0-xilinx-gff8137b-dirty #25
Hardware name: Xilinx Zynq Platform
[<c010e718>] (unwind_backtrace) from [<c010a8d0>] (show_stack+0x10/0x14)
[<c010a8d0>] (show_stack) from [<c02fcea4>] (dump_stack+0x84/0xa4)
[<c02fcea4>] (dump_stack) from [<c0405d64>] (ubi_io_read+0x1d4/0x2a8)
[<c0405d64>] (ubi_io_read) from [<c0406220>] (ubi_io_read_vid_hdr+0x6c/0x1d8)
[<c0406220>] (ubi_io_read_vid_hdr) from [<c040a290>] (ubi_attach+0x1ec/0x1194)
[<c040a290>] (ubi_attach) from [<c0400b28>] (ubi_attach_mtd_dev+0x62c/0xaf8)
[<c0400b28>] (ubi_attach_mtd_dev) from [<c0401ff8>] (ctrl_cdev_ioctl+0xf0/0x1ec)
[<c0401ff8>] (ctrl_cdev_ioctl) from [<c01d6b88>] (vfs_ioctl+0x20/0x34)
[<c01d6b88>] (vfs_ioctl) from [<c01d7488>] (do_vfs_ioctl+0x7d8/0x8b0)
[<c01d7488>] (do_vfs_ioctl) from [<c01d7594>] (SyS_ioctl+0x34/0x5c)
[<c01d7594>] (SyS_ioctl) from [<c0106f00>] (ret_fast_syscall+0x0/0x3c)
ubi1: scanning is finished
ubi1: attached mtd5 (name "reserve1", size 128 MiB)
ubi1: PEB size: 131072 bytes (128 KiB), LEB size: 129024 bytes
ubi1: min./max. I/O unit sizes: 2048/2048, sub-page size 512
ubi1: VID header offset: 512 (aligned 512), data offset: 2048
ubi1: good PEBs: 1019, bad PEBs: 5, corrupted PEBs: 0
ubi1: user volume: 1, internal volumes: 1, max. volumes count: 128
ubi1: max/mean erase counter: 1114/195, WL threshold: 4096, image sequence number: 1390910202
ubi1: available PEBs: 0, total reserved PEBs: 1019, PEBs reserved for bad PEB handling: 35
ubi1: background thread "ubi_bgt1d" started, PID 720
ubi1 warning: ubi_io_read: error -74 (ECC error) while reading 512 bytes from PEB 48:512, read only 512 bytes, retry
ubi1 warning: ubi_io_read: error -74 (ECC error) while reading 512 bytes from PEB 48:512, read only 512 bytes, retry
ubi1 warning: ubi_io_read: error -74 (ECC error) while reading 512 bytes from PEB 48:512, read only 512 bytes, retry
ubi1 error: ubi_io_read: error -74 (ECC error) while reading 512 bytes from PEB 48:512, read 512 bytes
CPU: 0 PID: 720 Comm: ubi_bgt1d Not tainted 4.6.0-xilinx-gff8137b-dirty #25
Hardware name: Xilinx Zynq Platform
[<c010e718>] (unwind_backtrace) from [<c010a8d0>] (show_stack+0x10/0x14)
[<c010a8d0>] (show_stack) from [<c02fcea4>] (dump_stack+0x84/0xa4)
[<c02fcea4>] (dump_stack) from [<c0405d64>] (ubi_io_read+0x1d4/0x2a8)
[<c0405d64>] (ubi_io_read) from [<c0406220>] (ubi_io_read_vid_hdr+0x6c/0x1d8)
[<c0406220>] (ubi_io_read_vid_hdr) from [<c0408280>] (wear_leveling_worker+0x1e0/0x6a0)
[<c0408280>] (wear_leveling_worker) from [<c0407770>] (do_work+0xcc/0x100)
[<c0407770>] (do_work) from [<c0408dc8>] (ubi_thread+0x100/0x190)
[<c0408dc8>] (ubi_thread) from [<c0132960>] (kthread+0xdc/0xf0)
[<c0132960>] (kthread) from [<c0106fb8>] (ret_from_fork+0x14/0x3c)
UBIFS (ubi1:0): background thread "ubifs_bgt1_0" started, PID 723
ubi1: scrubbed PEB 48 (LEB 0:70), data moved to PEB 822
UBIFS (ubi1:0): UBIFS: mounted UBI device 1, volume 0, name "reserve1"
UBIFS (ubi1:0): LEB size: 129024 bytes (126 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
UBIFS (ubi1:0): FS size: 125024256 bytes (119 MiB, 969 LEBs), journal size 6322176 bytes (6 MiB, 49 LEBs)
UBIFS (ubi1:0): reserved for root: 4952683 bytes (4836 KiB)
UBIFS (ubi1:0): media format: w4/r0 (latest is w4/r0), UUID 400DE64E-7DB4-4352-8F89-C02B55BFDBE2, small LPT model
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
macb e000b000.ethernet eth0: unable to generate target frequency: 25000000 Hz
macb e000b000.ethernet eth0: link up (100/Full)
IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
In axi fpga driver!
request_mem_region OK!
AXI fpga dev virtual address is 0xcfb40000
*base_vir_addr = 0xab013
In fpga mem driver!
request_mem_region OK!
fpga mem virtual address is 0xd2000000
random: nonblocking pool is initialized
2021-03-29 09:46:08 driver-btm-api.c:631:init_freq_mode: This is scan-user version
2021-03-29 09:46:08 driver-btm-api.c:1994:bitmain_soc_init: opt_multi_version = 1
2021-03-29 09:46:08 driver-btm-api.c:1995:bitmain_soc_init: opt_bitmain_ab = 1
2021-03-29 09:46:08 driver-btm-api.c:1996:bitmain_soc_init: opt_bitmain_work_mode = 0
2021-03-29 09:46:08 driver-btm-api.c:1997:bitmain_soc_init: Miner compile time: Tue Dec 24 16:13:07 CST 2019 type: Antminer T17
2021-03-29 09:46:08 driver-btm-api.c:1998:bitmain_soc_init: commit version: e93a09b 2019-12-24 16:03:45, build by: lol 2019-12-24 16:19:49
2021-03-29 09:46:08 driver-btm-api.c:1810:show_sn: no SN got, please write SN to /nvdata/sn
2021-03-29 09:46:08 driver-btm-api.c:1135:miner_device_init: Detect 256MB control board of XILINX
2021-03-29 09:46:08 driver-btm-api.c:1083:init_fan_parameter: fan_eft : 0 fan_pwm : 0
2021-03-29 09:46:08 thread.c:789:create_read_nonce_reg_thread: create thread
2021-03-29 09:46:14 driver-btm-api.c:1067:init_miner_version: miner ID : 8064ad467910481c
2021-03-29 09:46:14 driver-btm-api.c:1073:init_miner_version: FPGA Version = 0xB013
2021-03-29 09:46:16 eeprom.c:456:check_pattern_test_level: L6 board
2021-03-29 09:46:18 eeprom.c:456:check_pattern_test_level: L6 board
2021-03-29 09:46:19 eeprom.c:456:check_pattern_test_level: L6 board
2021-03-29 09:46:19 eeprom.c:545:eeprom_load: try higher voltage open core
2021-03-29 09:46:19 driver-btm-api.c:705:get_product_id: product_id[0] = 1
2021-03-29 09:46:19 driver-btm-api.c:705:get_product_id: product_id[1] = 1
2021-03-29 09:46:19 driver-btm-api.c:705:get_product_id: product_id[2] = 1
2021-03-29 09:46:19 driver-btm-api.c:1633:get_ccdly_opt: ccdly_opt[0] = 2
2021-03-29 09:46:19 driver-btm-api.c:1633:get_ccdly_opt: ccdly_opt[1] = 2
2021-03-29 09:46:19 driver-btm-api.c:1633:get_ccdly_opt: ccdly_opt[2] = 2
2021-03-29 09:46:19 driver-btm-api.c:1877:bitmain_board_init: g_ccdly_opt = 2
2021-03-29 09:46:19 driver-btm-api.c:644:_set_project_type: project:2
2021-03-29 09:46:19 driver-btm-api.c:674:_set_project_type: Project type: Antminer T17
2021-03-29 09:46:19 driver-btm-api.c:685:dump_pcb_bom_version: Chain [0] PCB Version: 0x0100
2021-03-29 09:46:19 driver-btm-api.c:686:dump_pcb_bom_version: Chain [0] BOM Version: 0x0100
2021-03-29 09:46:19 driver-btm-api.c:685:dump_pcb_bom_version: Chain [1] PCB Version: 0x0100
2021-03-29 09:46:19 driver-btm-api.c:686:dump_pcb_bom_version: Chain [1] BOM Version: 0x0100
2021-03-29 09:46:19 driver-btm-api.c:685:dump_pcb_bom_version: Chain [2] PCB Version: 0x0100
2021-03-29 09:46:19 driver-btm-api.c:686:dump_pcb_bom_version: Chain [2] BOM Version: 0x0100
2021-03-29 09:46:19 driver-btm-api.c:1897:bitmain_board_init: Fan check passed.
2021-03-29 09:46:21 board.c:36:jump_and_app_check_restore_pic: chain[0] PIC jump to app
2021-03-29 09:46:25 board.c:40:jump_and_app_check_restore_pic: Check chain[0] PIC fw version=0xb9
2021-03-29 09:46:26 board.c:36:jump_and_app_check_restore_pic: chain[1] PIC jump to app
2021-03-29 09:46:30 board.c:40:jump_and_app_check_restore_pic: Check chain[1] PIC fw version=0xb9
2021-03-29 09:46:32 board.c:36:jump_and_app_check_restore_pic: chain[2] PIC jump to app
2021-03-29 09:46:35 board.c:40:jump_and_app_check_restore_pic: Check chain[2] PIC fw version=0xb9
2021-03-29 09:46:35 thread.c:784:create_pic_heart_beat_thread: create thread
2021-03-29 09:46:35 power_api.c:55:power_init: power init ...
2021-03-29 09:46:35 driver-btm-api.c:1907:bitmain_board_init: Enter 30s sleep to make sure power release finish.
2021-03-29 09:47:07 power_api.c:264:set_iic_power_to_custom_voltage: setting to voltage: 18.00 ...
2021-03-29 09:47:13 power_api.c:124:check_voltage_multi: retry time: 0
2021-03-29 09:47:15 power_api.c:86:get_average_voltage: chain[0], voltage is: 18.050742
2021-03-29 09:47:16 power_api.c:86:get_average_voltage: chain[1], voltage is: 18.167080
2021-03-29 09:47:18 power_api.c:86:get_average_voltage: chain[2], voltage is: 18.167080
2021-03-29 09:47:18 power_api.c:97:get_average_voltage: aveage voltage is: 18.128301
2021-03-29 09:47:18 power_api.c:182:set_iic_power_by_voltage: now set voltage to : 18.000000
2021-03-29 09:47:18 driver-hash-chip.c:233:dhash_chip_set_baud_v2: chain[0]: chip baud = 115200, chip_divider = 26
2021-03-29 09:47:18 driver-hash-chip.c:233:dhash_chip_set_baud_v2: chain[1]: chip baud = 115200, chip_divider = 26
2021-03-29 09:47:18 driver-hash-chip.c:233:dhash_chip_set_baud_v2: chain[2]: chip baud = 115200, chip_divider = 26
2021-03-29 09:47:18 uart.c:80:set_baud: set fpga_baud = 115200, fpga_divider = 26
2021-03-29 09:47:30 driver-btm-api.c:1010:check_asic_number_with_power_on: Chain[0]: find 30 asic, times 0
2021-03-29 09:47:40 driver-btm-api.c:1010:check_asic_number_with_power_on: Chain[1]: find 30 asic, times 0
2021-03-29 09:47:50 driver-btm-api.c:1010:check_asic_number_with_power_on: Chain[2]: find 30 asic, times 0
2021-03-29 09:47:53 driver-btm-api.c:348:set_order_clock: chain[0]: set order clock, stragegy 3 clock_en=0xff
2021-03-29 09:47:53 driver-btm-api.c:348:set_order_clock: chain[1]: set order clock, stragegy 3 clock_en=0xff
2021-03-29 09:47:54 driver-btm-api.c:348:set_order_clock: chain[2]: set order clock, stragegy 3 clock_en=0xff
2021-03-29 09:47:54 driver-hash-chip.c:490:set_clock_delay_control: core_data = 0xf4
2021-03-29 09:47:54 driver-hash-chip.c:233:dhash_chip_set_baud_v2: chain[0]: chip baud = 3000000, chip_divider = 0
2021-03-29 09:47:54 driver-hash-chip.c:233:dhash_chip_set_baud_v2: chain[1]: chip baud = 3000000, chip_divider = 0
2021-03-29 09:47:54 driver-hash-chip.c:233:dhash_chip_set_baud_v2: chain[2]: chip baud = 3000000, chip_divider = 0
2021-03-29 09:47:54 uart.c:80:set_baud: set fpga_baud = 3000000, fpga_divider = 0
2021-03-29 09:47:54 driver-btm-api.c:1660:check_clock_counter: freq 50 clock_counter_limit 6
2021-03-29 09:47:54 driver-hash-chip.c:233:dhash_chip_set_baud_v2: chain[0]: chip baud = 115200, chip_divider = 26
2021-03-29 09:47:54 driver-hash-chip.c:233:dhash_chip_set_baud_v2: chain[1]: chip baud = 115200, chip_divider = 26
2021-03-29 09:47:54 driver-hash-chip.c:233:dhash_chip_set_baud_v2: chain[2]: chip baud = 115200, chip_divider = 26
2021-03-29 09:47:54 uart.c:80:set_baud: set fpga_baud = 115200, fpga_divider = 26
2021-03-29 09:47:54 voltage[0] = 1730
2021-03-29 09:47:54 voltage[1] = 1730
2021-03-29 09:47:54 voltage[2] = 1730
2021-03-29 09:47:54 power_api.c:140:set_working_voltage: working_voltage = 17.300000
2021-03-29 09:47:56 temperature.c:282:calibrate_temp_sensor_one_chain: Temperature sensor calibration: chain 0 success.
2021-03-29 09:47:57 temperature.c:282:calibrate_temp_sensor_one_chain: Temperature sensor calibration: chain 1 success.
2021-03-29 09:47:58 temperature.c:203:is_temp_sensor_type_correct: Wrong temp sensor type, chain = 2, sensor = 6, type = 0x0, retry.
2021-03-29 09:47:58 temperature.c:203:is_temp_sensor_type_correct: Wrong temp sensor type, chain = 2, sensor = 6, type = 0x0, retry.
2021-03-29 09:47:59 temperature.c:203:is_temp_sensor_type_correct: Wrong temp sensor type, chain = 2, sensor = 6, type = 0x0, retry.
2021-03-29 09:47:59 temperature.c:203:is_temp_sensor_type_correct: Wrong temp sensor type, chain = 2, sensor = 6, type = 0x0, retry.
2021-03-29 09:47:59 driver-btm-api.c:201:set_miner_status: ERROR_TEMP_LOST
2021-03-29 09:47:59 driver-btm-api.c:142:stop_mining: stop mining: Can't get temperature sensor type!
2021-03-29 09:47:59 thread.c:834:cancel_read_nonce_reg_thread: cancel thread
2021-03-29 09:47:59 driver-btm-api.c:128:killall_hashboard: ****power off hashboard****