S17+ Control Board SD firmware

Answered

Comments

4 comments

    Found that 7zip application was able to un zip the file. Uploaded SD card to miner and now the miner is showing 

    "2021-03-21 19:33:28 driver-btm-api.c:1707:check_pool_for_validation: Find illegal pool: url = stratum+tcp://btc-us.f2pool.com:3333, worker = pe"

    2021-03-21 19:33:28 driver-btm-api.c:194:set_miner_status: ERROR_SOC_INIT
    2021-03-21 19:33:28 driver-btm-api.c:135:stop_mining: stop mining: soc init failed!
    2021-03-21 19:33:28 thread.c:776:cancel_read_nonce_reg_thread: cancel thread
    2021-03-21 19:33:28 driver-btm-api.c:120:killall_hashboard: ****power off hashboard****
    2021-03-21 19:33:52 power_api.c:182:power_off: init gpio907

    Do you have a fix?

    0
    Comment actions Permalink

    Hello!
    After using the SD card, you need to upgrade the latest firmware version on the official website.

    0
    Comment actions Permalink

    I uploaded the latest firmware from the web site and it’s still continuing failing on temp sensor.

    0
    Comment actions Permalink

    2021-03-20 23:02:39 power_api.c:71:check_voltage: target_vol = 20.90, actural_vol = 20.95, check voltage passed.
    2021-03-20 23:02:40 thread.c:1273:asic_status_monitor_thread: ERROR: chain 1 get hashrate_reg_counter 2, require 65, failed times 1: ooxxx xxxxx xxxxx xxxxx xxxxx xxxxx xxxxx xxxxx xxxxx xxxxx xxxxx xxxxx xxxxx
    2021-03-20 23:02:40 temperature.c:843:get_temp_info: read temp sensor failed: chain = 1, sensor = 0, chip = 14, reg = 0
    2021-03-20 23:02:40 temperature.c:843:get_temp_info: read temp sensor failed: chain = 1, sensor = 0, chip = 14, reg = 1
    2021-03-20 23:02:40 temperature.c:843:get_temp_info: read temp sensor failed: chain = 1, sensor = 1, chip = 10, reg = 0
    2021-03-20 23:02:41 temperature.c:843:get_temp_info: read temp sensor failed: chain = 1, sensor = 1, chip = 10, reg = 1
    2021-03-20 23:02:41 temperature.c:843:get_temp_info: read temp sensor failed: chain = 1, sensor = 2, chip = 54, reg = 0
    2021-03-20 23:02:41 thread.c:1293:asic_status_monitor_thread: chain 1 can't get enough hashrate reg val for 0 times.
    2021-03-20 23:02:41 temperature.c:843:get_temp_info: read temp sensor failed: chain = 1, sensor = 2, chip = 54, reg = 1
    2021-03-20 23:02:42 thread.c:1273:asic_status_monitor_thread: ERROR: chain 1 get hashrate_reg_counter 2, require 65, failed times 1: ooxxx xxxxx xxxxx xxxxx xxxxx xxxxx xxxxx xxxxx xxxxx xxxxx xxxxx xxxxx xxxxx
    2021-03-20 23:02:42 temperature.c:843:get_temp_info: read temp sensor failed: chain = 1, sensor = 3, chip = 50, reg = 0
    2021-03-20 23:02:42 temperature.c:843:get_temp_info: read temp sensor failed: chain = 1, sensor = 3, chip = 50, reg = 1
    2021-03-20 23:02:43 temperature.c:875:get_temp_info: ERROR: chain 1 can get NONE temp info or temp value abnormal, power it off
    2021-03-20 23:02:43 thread.c:1293:asic_status_monitor_thread: chain 1 can't get enough hashrate reg val for 1 times.
    2021-03-20 23:02:44 thread.c:1265:asic_status_monitor_thread: ERROR: chain 1 get hashrate_reg_counter 0, require 65, failed times 1
    2021-03-20 23:04:23 power_api.c:352:set_to_voltage_by_steps: Set to voltage raw 2060, step by step.
    2021-03-20 23:04:25 power_api.c:85:check_voltage_multi: retry time: 0
    2021-03-20 23:04:26 power_api.c:40:_get_avg_voltage: chain = 0, voltage = 20.685091
    2021-03-20 23:04:27 power_api.c:40:_get_avg_voltage: chain = 2, voltage = 20.662805
    2021-03-20 23:04:27 power_api.c:53:_get_avg_voltage: average_voltage = 20.673948
    2021-03-20 23:04:27 power_api.c:71:check_voltage: target_vol = 20.60, actural_vol = 20.67, check voltage passed.

    0
    Comment actions Permalink

Please sign in to leave a comment.