S19 Pro Dashboard shows abnormal network state, 0 real hashrate and Average power, and 1s Running time. Still hashing on pool
S19 Pro Dashboard shows abnormal network state along with 0 real hashrate, 0 average total power, 0% rejection and stays at 0d 0h 0m 1s for the running time.
The Chains` Rate shows a solid line. Nothing else shows as abnormal.
However, the pool shows that it's mining without an issue.
Can you give me an idea what is happening here? I have replaced the power wires, network cable, router and can verify I have a stable connection as the other 2 S19 Pro that are right next to it are working 100%. Even moved network cable from one of the other miners to this one and it still shows abnormal network.
Please advise.
Thank You!
pcpu-alloc: [0] 0 [0] 1 Built 1 zonelists in Zone order, mobility grouping on. Total pages: 60960 Kernel command line: mem=240M console=ttyPS0,115200 ramdisk_size=33554432 root=/dev/ram rw earlyprintk PID hash table entries: 1024 (order: 0, 4096 bytes) Dentry cache hash table entries: 32768 (order: 5, 131072 bytes) Inode-cache hash table entries: 16384 (order: 4, 65536 bytes) Memory: 209572K/245760K available (6317K kernel code, 243K rwdata, 1932K rodata, 1024K init, 232K bss, 19804K reserved, 16384K cma-reserved, 0K highmem) Virtual kernel memory layout: vector : 0xffff0000 - 0xffff1000 ( 4 kB) fixmap : 0xffc00000 - 0xfff00000 (3072 kB) vmalloc : 0xcf800000 - 0xff800000 ( 768 MB) lowmem : 0xc0000000 - 0xcf000000 ( 240 MB) pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB) modules : 0xbf000000 - 0xbfe00000 ( 14 MB) .text : 0xc0008000 - 0xc090e410 (9242 kB) .init : 0xc0a00000 - 0xc0b00000 (1024 kB) .data : 0xc0b00000 - 0xc0b3cda0 ( 244 kB) .bss : 0xc0b3cda0 - 0xc0b77024 ( 233 kB) Preemptible hierarchical RCU implementation. Build-time adjustment of leaf fanout to 32. RCU restricting CPUs from NR_CPUS=4 to nr_cpu_ids=2. RCU: Adjusting geometry for rcu_fanout_leaf=32, nr_cpu_ids=2 NR_IRQS:16 nr_irqs:16 16 efuse mapped to cf800000 ps7-slcr mapped to cf802000 L2C: platform modifies aux control register: 0x72360000 -> 0x72760000 L2C: DT/platform modifies aux control register: 0x72360000 -> 0x72760000 L2C-310 erratum 769419 enabled L2C-310 enabling early BRESP for Cortex-A9 L2C-310 full line of zeros enabled for Cortex-A9 L2C-310 ID prefetch enabled, offset 1 lines L2C-310 dynamic clock gating enabled, standby mode enabled L2C-310 cache controller enabled, 8 ways, 512 kB L2C-310: CACHE_ID 0x410000c8, AUX_CTRL 0x76760001 zynq_clock_init: clkc starts at cf802100 Zynq clock init sched_clock: 64 bits at 333MHz, resolution 3ns, wraps every 4398046511103ns clocksource: arm_global_timer: mask: 0xffffffffffffffff max_cycles: 0x4ce07af025, max_idle_ns: 440795209040 ns Switching to timer-based delay loop, resolution 3ns clocksource: ttc_clocksource: mask: 0xffff max_cycles: 0xffff, max_idle_ns: 537538477 ns ps7-ttc #0 at cf80a000, irq=18 Console: colour dummy device 80x30 Calibrating delay loop (skipped), value calculated using timer frequency.. 666.66 BogoMIPS (lpj=3333333) pid_max: default: 32768 minimum: 301 Mount-cache hash table entries: 1024 (order: 0, 4096 bytes) Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes) CPU: Testing write buffer coherency: ok CPU0: thread -1, cpu 0, socket 0, mpidr 80000000 Setting up static identity map for 0x100000 - 0x100058 CPU1: failed to boot: -1 Brought up 1 CPUs SMP: Total of 1 processors activated (666.66 BogoMIPS). CPU: All CPU(s) started in SVC mode. devtmpfs: initialized VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 4 clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns pinctrl core: initialized pinctrl subsystem NET: Registered protocol family 16 DMA: preallocated 256 KiB pool for atomic coherent allocations cpuidle: using governor menu hw-breakpoint: found 5 (+1 reserved) breakpoint and 1 watchpoint registers. hw-breakpoint: maximum watchpoint size is 4 bytes. zynq-ocm f800c000.ps7-ocmc: ZYNQ OCM pool: 256 KiB @ 0xcf880000 vgaarb: loaded SCSI subsystem initialized usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb media: Linux media interface: v0.10 Linux video capture interface: v2.00 pps_core: LinuxPPS API ver. 1 registered pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it> PTP clock support registered EDAC MC: Ver: 3.0.0 Advanced Linux Sound Architecture Driver Initialized. clocksource: Switched to clocksource arm_global_timer NET: Registered protocol family 2 TCP established hash table entries: 2048 (order: 1, 8192 bytes) TCP bind hash table entries: 2048 (order: 2, 16384 bytes) TCP: Hash tables configured (established 2048 bind 2048) UDP hash table entries: 256 (order: 1, 8192 bytes) UDP-Lite hash table entries: 256 (order: 1, 8192 bytes) NET: Registered protocol family 1 RPC: Registered named UNIX socket transport module. RPC: Registered udp transport module. RPC: Registered tcp transport module. RPC: Registered tcp NFSv4.1 backchannel transport module. PCI: CLS 0 bytes, default 64 Trying to unpack rootfs image as initramfs... rootfs image is not initramfs (no cpio magic); looks like an initrd Freeing initrd memory: 6732K (cd466000 - cdaf9000) hw perfevents: enabled with armv7_cortex_a9 PMU driver, 7 counters available futex hash table entries: 512 (order: 3, 32768 bytes) workingset: timestamp_bits=28 max_order=16 bucket_order=0 jffs2: version 2.2. (NAND) (SUMMARY) © 2001-2006 Red Hat, Inc. io scheduler noop registered io scheduler deadline registered io scheduler cfq registered (default) dma-pl330 f8003000.ps7-dma: Loaded driver for PL330 DMAC-241330 dma-pl330 f8003000.ps7-dma: DBUFF-128x8bytes Num_Chans-8 Num_Peri-4 Num_Events-16 e0000000.serial: ttyPS0 at MMIO 0xe0000000 (irq = 159, base_baud = 6249999) is a xuartps console [ttyPS0] enabled xdevcfg f8007000.ps7-dev-cfg: ioremap 0xf8007000 to cf86e000 [drm] Initialized drm 1.1.0 20060810 brd: module loaded loop: module loaded CAN device driver interface gpiod_set_value: invalid GPIO libphy: MACB_mii_bus: probed macb e000b000.ethernet eth0: Cadence GEM rev 0x00020118 at 0xe000b000 irq 31 (00:0a:35:00:00:00) Generic PHY e000b000.etherne:00: attached PHY driver [Generic PHY] (mii_bus:phy_addr=e000b000.etherne:00, irq=-1) e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k e1000e: Copyright(c) 1999 - 2015 Intel Corporation. ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver ehci-pci: EHCI PCI platform driver usbcore: registered new interface driver usb-storage mousedev: PS/2 mouse device common for all mice i2c /dev entries driver cdns-i2c e0005000.ps7_i2c: 100 kHz mmio e0005000 irq 154 Xilinx Zynq CpuIdle Driver started sdhci: Secure Digital Host Controller Interface driver sdhci: Copyright(c) Pierre Ossman sdhci-pltfm: SDHCI platform and OF driver helper mmc0: SDHCI controller on e0100000.ps7-sdio [e0100000.ps7-sdio] using ADMA ledtrig-cpu: registered to indicate activity on CPUs usbcore: registered new interface driver usbhid usbhid: USB HID core driver nand: disable subpage write nand: device found, Manufacturer ID: 0x2c, Chip ID: 0xda nand: Micron MT29F2G08ABAEAWP nand: 256 MiB, SLC, erase size: 128 KiB, page size: 2048, OOB size: 64 nand: NAND_ECC_HW nand: NAND_ECC_HW_SYNDROME mtd->writesize = 2048 ecc->strength = 1 ecc->size = 2048 mtd->writesize = 2048 chip->ecc_strength_ds = 4 chip->ecc_step_ds = 512 nand: WARNING: pl35x-nand: the ECC used on your system is too weak compared to the one required by the NAND chip Bad block table found at page 131008, version 0x01 Bad block table found at page 130944, version 0x01 8 ofpart partitions found on MTD device pl35x-nand Creating 8 MTD partitions on "pl35x-nand": 0x000000000000-0x000002800000 : "BOOT.bin-dts-marker-kernel" 0x000002800000-0x000004800000 : "ramfs" 0x000004800000-0x000005000000 : "configs" 0x000005000000-0x000005200000 : "sig" 0x000005200000-0x000006000000 : "reserve1" 0x000006000000-0x000007000000 : "upgrade-ramfs" 0x000007000000-0x00000a800000 : "upgrade-file" 0x00000a800000-0x000010000000 : "reserve2" nf_conntrack version 0.5.0 (3635 buckets, 14540 max) ip_tables: (C) 2000-2006 Netfilter Core Team NET: Registered protocol family 10 ip6_tables: (C) 2000-2006 Netfilter Core Team sit: IPv6 over IPv4 tunneling driver NET: Registered protocol family 17 can: controller area network core (rev 20120528 abi 9) NET: Registered protocol family 29 can: raw protocol (rev 20120528) can: broadcast manager protocol (rev 20120528 t) can: netlink gateway (rev 20130117) max_hops=1 zynq_pm_ioremap: no compatible node found for 'xlnx,zynq-ddrc-a05' zynq_pm_late_init: Unable to map DDRC IO memory. Registering SWP/SWPB emulation handler hctosys: unable to open rtc device (rtc0) ALSA device list: No soundcards found. RAMDISK: gzip image found at block 0 EXT4-fs (ram0): couldn't mount as ext3 due to feature incompatibilities EXT4-fs warning (device ram0): ext4_update_dynamic_rev:746: updating to rev 1 because of new feature flag, running e2fsck is recommended EXT4-fs (ram0): mounted filesystem without journal. Opts: (null) VFS: Mounted root (ext4 filesystem) on device 1:0. devtmpfs: mounted Freeing unused kernel memory: 1024K (c0a00000 - c0b00000) EXT4-fs (ram0): re-mounted. Opts: block_validity,delalloc,barrier,user_xattr,errors=remount-ro devpts: called with bogus options ubi0: attaching mtd2 ubi0: scanning is finished ubi0: attached mtd2 (name "configs", size 8 MiB) ubi0: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes ubi0: min./max. I/O unit sizes: 2048/2048, sub-page size 2048 ubi0: VID header offset: 2048 (aligned 2048), data offset: 4096 ubi0: good PEBs: 64, bad PEBs: 0, corrupted PEBs: 0 ubi0: user volume: 1, internal volumes: 1, max. volumes count: 128 ubi0: max/mean erase counter: 4/1, WL threshold: 4096, image sequence number: 262741923 ubi0: available PEBs: 36, total reserved PEBs: 28, PEBs reserved for bad PEB handling: 4 ubi0: background thread "ubi_bgt0d" started, PID 729 UBIFS (ubi0:0): background thread "ubifs_bgt0_0" started, PID 733 UBIFS (ubi0:0): recovery needed UBIFS (ubi0:0): recovery completed UBIFS (ubi0:0): UBIFS: mounted UBI device 0, volume 0, name "configs" UBIFS (ubi0:0): LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes UBIFS (ubi0:0): FS size: 1396736 bytes (1 MiB, 11 LEBs), journal size 888833 bytes (0 MiB, 5 LEBs) UBIFS (ubi0:0): reserved for root: 65970 bytes (64 KiB) UBIFS (ubi0:0): media format: w4/r0 (latest is w4/r0), UUID A9E8BDA4-70DE-45D9-83BE-2DD9F129C0C6, small LPT model ubi2: attaching mtd4 ubi2: scanning is finished ubi2: attached mtd4 (name "reserve1", size 14 MiB) ubi2: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes ubi2: min./max. I/O unit sizes: 2048/2048, sub-page size 2048 ubi2: VID header offset: 2048 (aligned 2048), data offset: 4096 ubi2: good PEBs: 112, bad PEBs: 0, corrupted PEBs: 0 ubi2: user volume: 1, internal volumes: 1, max. volumes count: 128 ubi2: max/mean erase counter: 3/1, WL threshold: 4096, image sequence number: 191768600 ubi2: available PEBs: 0, total reserved PEBs: 112, PEBs reserved for bad PEB handling: 4 ubi2: background thread "ubi_bgt2d" started, PID 740 UBIFS (ubi2:0): background thread "ubifs_bgt2_0" started, PID 744 UBIFS (ubi2:0): recovery needed UBIFS (ubi2:0): recovery completed UBIFS (ubi2:0): UBIFS: mounted UBI device 2, volume 0, name "misc" UBIFS (ubi2:0): LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes UBIFS (ubi2:0): FS size: 11935744 bytes (11 MiB, 94 LEBs), journal size 1015809 bytes (0 MiB, 6 LEBs) UBIFS (ubi2:0): reserved for root: 563754 bytes (550 KiB) UBIFS (ubi2:0): media format: w4/r0 (latest is w4/r0), UUID 01B37E71-DC71-43A5-AB56-E43A6DF8A9DD, small LPT model IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready random: avahi-daemon urandom read with 2 bits of entropy available macb e000b000.ethernet eth0: unable to generate target frequency: 25000000 Hz macb e000b000.ethernet eth0: link up (100/Full) IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready In axi fpga driver! request_mem_region OK! AXI fpga dev virtual address is 0xcfbc8000 *base_vir_addr = 0xb031 In fpga mem driver! request_mem_region OK! fpga mem virtual address is 0xd2000000 IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready macb e000b000.ethernet eth0: unable to generate target frequency: 25000000 Hz macb e000b000.ethernet eth0: link up (100/Full) IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready random: nonblocking pool is initialized ===========================================Miner log=========================================== 1970-01-01 00:00:10 Miner compile time: Mon Oct 26 17:55:33 CST 2020 type: Antminer S19 Pro 1970-01-01 00:00:11 This is fix-freq version 1970-01-01 00:00:11 Miner compile time: Mon Oct 26 17:55:33 CST 2020 type: Antminer S19 Pro 1970-01-01 00:00:11 commit version: 62e4736 2020-09-21 11:17:56, build by: jenkins 2020-10-26 18:06:03 1970-01-01 00:00:11 opt_multi_version = 1 1970-01-01 00:00:11 opt_bitmain_ab = 1 1970-01-01 00:00:11 mid_auto_gen = 0 1970-01-01 00:00:11 opt_bitmain_work_mode = 0 1970-01-01 00:00:11 mmap fpga_mem_addr_hal = 0xb5900000 1970-01-01 00:00:11 HASH_ON_PLUG V9 = 0x7 1970-01-01 00:00:11 Note: front fan is power on! 1970-01-01 00:00:11 Note: rear fan is power on! 1970-01-01 00:00:11 start the http log. 1970-01-01 00:00:11 httpListenThread start ret=0 1970-01-01 00:00:11 start listen on 6060 ... 1970-01-01 00:00:11 load machine NBP1901 conf 1970-01-01 00:00:11 machine : NBP1901 1970-01-01 00:00:11 chain_num 4, chain_domain_num 38, chain_asic_num 114, domain_asic_num 3 1970-01-01 00:00:17 miner ID : 806c4c242b10481c 1970-01-01 00:00:17 FPGA Version = 0xB031 1970-01-01 00:00:17 HASH_ON_PLUG V9 = 0x7 1970-01-01 00:00:17 ==========================capability start========================== 1970-01-01 00:00:17 board num = 3 1970-01-01 00:00:17 board id = 0, chain num = 1 1970-01-01 00:00:17 chain id = 0 1970-01-01 00:00:17 board id = 1, chain num = 1 1970-01-01 00:00:17 chain id = 1 1970-01-01 00:00:17 board id = 2, chain num = 1 1970-01-01 00:00:17 chain id = 2 1970-01-01 00:00:17 ==========================capability end============================ 1970-01-01 00:00:17 chain num = 3 2020-12-22 23:52:25 [chain 0] 2020-12-22 23:52:25 0x0000 11 42 A2 F6 83 A1 5F 48 FB A2 64 10 E3 84 34 71 2020-12-22 23:52:25 0x0010 90 14 CE 97 F2 70 BA 1E 35 F1 2A 2E ED 0A 86 4A 2020-12-22 23:52:25 0x0020 1E D8 BD 84 EB 8B 37 67 B5 83 2F 65 51 59 71 F1 2020-12-22 23:52:25 0x0030 5C FF B1 78 0F 61 E5 55 8C 3C D5 19 57 86 69 45 2020-12-22 23:52:25 0x0040 30 04 FF FF FF FF FF FF FF FF FF FF FF FF FF FF 2020-12-22 23:52:25 0x0050 FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF 2020-12-22 23:52:25 0x0060 FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF 2020-12-22 23:52:25 0x0070 FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF 2020-12-22 23:52:25 0x0080 FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF 2020-12-22 23:52:25 0x0090 FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF 2020-12-22 23:52:25 0x00A0 FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF 2020-12-22 23:52:25 0x00B0 FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF 2020-12-22 23:52:25 0x00C0 FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF 2020-12-22 23:52:25 0x00D0 FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF 2020-12-22 23:52:25 0x00E0 FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF 2020-12-22 23:52:25 0x00F0 FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF 5A 2020-12-22 23:52:25 2020-12-22 23:52:26 [chain 1] 2020-12-22 23:52:26 0x0000 11 42 65 6E 34 E6 CA 56 20 C8 78 65 2C 8A 70 6F 2020-12-22 23:52:26 0x0010 F3 B7 BC 8F D8 EC EF 1F F6 A5 53 DF 16 CB 30 B7 2020-12-22 23:52:26 0x0020 4F 21 28 BB 29 D2 C5 CE BA AE 4E 9D D2 24 14 C9 2020-12-22 23:52:26 0x0030 2A 1D 87 7E EC CC 19 F3 F5 90 64 72 AC F7 14 D8 2020-12-22 23:52:26 0x0040 13 2D FF FF FF FF FF FF FF FF FF FF FF FF FF FF 2020-12-22 23:52:26 0x0050 FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF 2020-12-22 23:52:26 0x0060 FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF 2020-12-22 23:52:26 0x0070 FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF 2020-12-22 23:52:26 0x0080 FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF 2020-12-22 23:52:26 0x0090 FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF 2020-12-22 23:52:26 0x00A0 FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF 2020-12-22 23:52:26 0x00B0 FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF 2020-12-22 23:52:26 0x00C0 FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF 2020-12-22 23:52:26 0x00D0 FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF 2020-12-22 23:52:26 0x00E0 FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF 2020-12-22 23:52:26 0x00F0 FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF 5A 2020-12-22 23:52:26 2020-12-22 23:52:28 [chain 2] 2020-12-22 23:52:28 0x0000 11 42 2B 82 85 2D E8 75 0E C9 CB 6F 7D 49 5B 90 2020-12-22 23:52:28 0x0010 DD 31 38 1A BE DA 22 C3 BF F3 B5 83 0E E2 1C 9F 2020-12-22 23:52:28 0x0020 FE 09 09 FC EE DE 86 DD 58 6F 2E A0 E9 3D 2C D2 2020-12-22 23:52:28 0x0030 9A 1C EF 86 AB E1 37 7E 0F 41 7D 08 D3 D7 6F 85 2020-12-22 23:52:28 0x0040 DF 17 FF FF FF FF FF FF FF FF FF FF FF FF FF FF 2020-12-22 23:52:28 0x0050 FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF 2020-12-22 23:52:28 0x0060 FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF 2020-12-22 23:52:28 0x0070 FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF 2020-12-22 23:52:28 0x0080 FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF 2020-12-22 23:52:28 0x0090 FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF 2020-12-22 23:52:28 0x00A0 FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF 2020-12-22 23:52:28 0x00B0 FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF 2020-12-22 23:52:28 0x00C0 FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF 2020-12-22 23:52:28 0x00D0 FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF 2020-12-22 23:52:28 0x00E0 FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF 2020-12-22 23:52:28 0x00F0 FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF 5A 2020-12-22 23:52:28 2020-12-22 23:52:28 fan_eft : 0 fan_pwm : 100 2020-12-22 23:52:28 create thread 2020-12-22 23:52:28 fixed working voltage = 1260 2020-12-22 23:52:28 Chain [0] PCB Version: 0x0100 2020-12-22 23:52:28 Chain [0] BOM Version: 0x0100 2020-12-22 23:52:28 Chain [1] PCB Version: 0x0100 2020-12-22 23:52:28 Chain [1] BOM Version: 0x0100 2020-12-22 23:52:28 Chain [2] PCB Version: 0x0100 2020-12-22 23:52:28 Chain [2] BOM Version: 0x0100 2020-12-22 23:52:32 Fan check passed. 2020-12-22 23:52:33 chain[0] PIC jump to app 2020-12-22 23:52:35 Check chain[0] PIC fw version=0x89 2020-12-22 23:52:36 chain[1] PIC jump to app 2020-12-22 23:52:37 Check chain[1] PIC fw version=0x89 2020-12-22 23:52:38 chain[2] PIC jump to app 2020-12-22 23:52:40 Check chain[2] PIC fw version=0x89 2020-12-22 23:52:40 create thread 2020-12-22 23:52:40 max sensor num = 4 2020-12-22 23:52:40 temperature_monitor_thread start... 2020-12-22 23:52:44 power type version: 0x0071 2020-12-22 23:52:44 Enter sleep to make sure power release finish. 2020-12-22 23:53:15 Slept 30 seconds, diff = 4. 2020-12-22 23:53:15 set_voltage_by_steps to 1500. 2020-12-22 23:53:18 start up min temp by 75a = 27 2020-12-22 23:53:18 set UART baud to 115200 2020-12-22 23:53:26 Chain[0]: find 114 asic, times 0 2020-12-22 23:53:35 Chain[1]: find 114 asic, times 0 2020-12-22 23:53:42 Chain[2]: find 114 asic, times 0 2020-12-22 23:53:42 pulse_mode = 1, ccdly_sel = 1, pwth_sel = 1 2020-12-22 23:53:47 min freq in eeprom = 525 2020-12-22 23:53:47 fixed frequency is 525 2020-12-22 23:53:47 Bring up temperature is 26 2020-12-22 23:53:47 set UART baud to 12000000 2020-12-22 23:53:47 set_voltage_by_steps to 1260. 2020-12-22 23:53:54 STATUS_INITED: soc init done! 2020-12-22 23:53:54 create thread 2020-12-22 23:53:54 create thread 2020-12-22 23:54:13 reload pool, need recalculate 2020-12-22 23:54:13 set_start_time_point total_tv_start_sys=129 total_tv_end_sys=130 2020-12-22 23:54:14 start to init... 2020-12-22 23:54:22 Init done! 2020-12-22 23:54:22 STATUS_OKAY 2020-12-22 23:54:22 start the cached job 2020-12-22 23:54:22 Version num 8 2020-12-22 23:54:22 Mask num 0xe000 2020-12-22 23:54:22 freq = 525, percent = 90, hcn = 12480, timeout = 449 2020-12-22 23:54:22 set_start_time_point total_tv_start_sys=138 total_tv_end_sys=139
-
hey guys i am having the exact same issue with a standard s19
at first it was sayin temp pic failed for chain 0 i unplugged the hashboard and plugged it back in now i have the exact scenairo described above can anyone confirm if control board fixed the issue
also i do have a control board for a s17+ on hand i have herd you can flash those with s19 firm ware and it will work!! i greatly appreciate any feed back!!
Please sign in to leave a comment.
Comments
2 comments