Comments

4 comments

    Hello,Mursid

    Please post the complete page of "miner status",and also send the complete kernel log here,then let me check them, btw:what is the rated hashrate of this S9 miner?

    0
    Comment actions Permalink

    Hi Luke,

    Please find the latest condition about my gear.

    0.000000] Booting Linux on physical CPU 0x0
    [ 0.000000] Linux version 3.14.0-xilinx-g16220c3 (lzq@armdev2) (gcc version 4.8.3 20140320 (prerelease) (Sourcery CodeBench Lite 2014.05-23) ) #83 SMP PREEMPT Thu Jul 12 11:42:53 CST 2018
    [ 0.000000] CPU: ARMv7 Processor [413fc090] revision 0 (ARMv7), cr=18c5387d
    [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
    [ 0.000000] Machine model: Xilinx Zynq
    [ 0.000000] cma: CMA: reserved 128 MiB at 27800000
    [ 0.000000] Memory policy: Data cache writealloc
    [ 0.000000] On node 0 totalpages: 258048
    [ 0.000000] free_area_init_node: node 0, pgdat c074ac00, node_mem_map e6fd8000
    [ 0.000000] Normal zone: 1520 pages used for memmap
    [ 0.000000] Normal zone: 0 pages reserved
    [ 0.000000] Normal zone: 194560 pages, LIFO batch:31
    [ 0.000000] HighMem zone: 496 pages used for memmap
    [ 0.000000] HighMem zone: 63488 pages, LIFO batch:15
    [ 0.000000] PERCPU: Embedded 8 pages/cpu @e6fc0000 s9088 r8192 d15488 u32768
    [ 0.000000] pcpu-alloc: s9088 r8192 d15488 u32768 alloc=8*4096
    [ 0.000000] pcpu-alloc: [0] 0 [0] 1
    [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 256528
    [ 0.000000] Kernel command line: noinitrd mem=1008M console=ttyPS0,115200 root=ubi0:rootfs ubi.mtd=1 rootfstype=ubifs rw rootwait
    [ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
    [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
    [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
    [ 0.000000] Memory: 884108K/1032192K available (5057K kernel code, 284K rwdata, 1928K rodata, 204K init, 258K bss, 148084K reserved, 253952K highmem)
    [ 0.000000] Virtual kernel memory layout:
    [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
    [ 0.000000] fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
    [ 0.000000] vmalloc : 0xf0000000 - 0xff000000 ( 240 MB)
    [ 0.000000] lowmem : 0xc0000000 - 0xef800000 ( 760 MB)
    [ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
    [ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB)
    [ 0.000000] .text : 0xc0008000 - 0xc06da8ac (6987 kB)
    [ 0.000000] .init : 0xc06db000 - 0xc070e380 ( 205 kB)
    [ 0.000000] .data : 0xc0710000 - 0xc0757138 ( 285 kB)
    [ 0.000000] .bss : 0xc0757144 - 0xc0797bfc ( 259 kB)
    [ 0.000000] Preemptible hierarchical RCU implementation.
    [ 0.000000] Dump stacks of tasks blocking RCU-preempt GP.
    [ 0.000000] RCU restricting CPUs from NR_CPUS=4 to nr_cpu_ids=2.
    [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2
    [ 0.000000] NR_IRQS:16 nr_irqs:16 16
    [ 0.000000] ps7-slcr mapped to f0004000
    [ 0.000000] zynq_clock_init: clkc starts at f0004100
    [ 0.000000] Zynq clock init
    [ 0.000014] sched_clock: 64 bits at 333MHz, resolution 3ns, wraps every 3298534883328ns
    [ 0.000295] ps7-ttc #0 at f0006000, irq=43
    [ 0.000600] Console: colour dummy device 80x30
    [ 0.000637] Calibrating delay loop... 1332.01 BogoMIPS (lpj=6660096)
    [ 0.090246] pid_max: default: 32768 minimum: 301
    [ 0.090460] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes)
    [ 0.090481] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes)
    [ 0.092659] CPU: Testing write buffer coherency: ok
    [ 0.092995] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
    [ 0.093051] Setting up static identity map for 0x4cb118 - 0x4cb170
    [ 0.093271] L310 cache controller enabled
    [ 0.093291] l2x0: 8 ways, CACHE_ID 0x410000c8, AUX_CTRL 0x72760000, Cache size: 512 kB
    [ 0.170993] CPU1: Booted secondary processor
    [ 0.260223] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
    [ 0.260351] Brought up 2 CPUs
    [ 0.260370] SMP: Total of 2 processors activated.
    [ 0.260378] CPU: All CPU(s) started in SVC mode.
    [ 0.261037] devtmpfs: initialized
    [ 0.263470] VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 4
    [ 0.264668] regulator-dummy: no parameters
    [ 0.272061] NET: Registered protocol family 16
    [ 0.274229] DMA: preallocated 256 KiB pool for atomic coherent allocations
    [ 0.276489] cpuidle: using governor ladder
    [ 0.276503] cpuidle: using governor menu
    [ 0.283874] syscon f8000000.ps7-slcr: regmap [mem 0xf8000000-0xf8000fff] registered
    [ 0.285382] hw-breakpoint: found 5 (+1 reserved) breakpoint and 1 watchpoint registers.
    [ 0.285396] hw-breakpoint: maximum watchpoint size is 4 bytes.
    [ 0.285508] zynq-ocm f800c000.ps7-ocmc: ZYNQ OCM pool: 256 KiB @ 0xf0080000
    [ 0.307270] bio: create slab <bio-0> at 0
    [ 0.308653] vgaarb: loaded
    [ 0.309361] SCSI subsystem initialized
    [ 0.310861] usbcore: registered new interface driver usbfs
    [ 0.311082] usbcore: registered new interface driver hub
    [ 0.311316] usbcore: registered new device driver usb
    [ 0.311832] media: Linux media interface: v0.10
    [ 0.311996] Linux video capture interface: v2.00
    [ 0.312234] pps_core: LinuxPPS API ver. 1 registered
    [ 0.312246] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
    [ 0.312367] PTP clock support registered
    [ 0.312728] EDAC MC: Ver: 3.0.0
    [ 0.313920] Advanced Linux Sound Architecture Driver Initialized.
    [ 0.316642] DMA-API: preallocated 4096 debug entries
    [ 0.316655] DMA-API: debugging enabled by kernel config
    [ 0.316725] Switched to clocksource arm_global_timer
    [ 0.336644] NET: Registered protocol family 2
    [ 0.337614] TCP established hash table entries: 8192 (order: 3, 32768 bytes)
    [ 0.337711] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
    [ 0.337870] TCP: Hash tables configured (established 8192 bind 8192)
    [ 0.337931] TCP: reno registered
    [ 0.337948] UDP hash table entries: 512 (order: 2, 16384 bytes)
    [ 0.337999] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
    [ 0.338268] NET: Registered protocol family 1
    [ 0.338624] RPC: Registered named UNIX socket transport module.
    [ 0.338637] RPC: Registered udp transport module.
    [ 0.338645] RPC: Registered tcp transport module.
    [ 0.338653] RPC: Registered tcp NFSv4.1 backchannel transport module.
    [ 0.338665] PCI: CLS 0 bytes, default 64
    [ 0.339105] hw perfevents: enabled with ARMv7 Cortex-A9 PMU driver, 7 counters available
    [ 0.341120] futex hash table entries: 512 (order: 3, 32768 bytes)
    [ 0.342506] bounce pool size: 64 pages
    [ 0.343388] jffs2: version 2.2. (NAND) © 2001-2006 Red Hat, Inc.
    [ 0.343590] msgmni has been set to 1486
    [ 0.344357] io scheduler noop registered
    [ 0.344370] io scheduler deadline registered
    [ 0.344410] io scheduler cfq registered (default)
    [ 0.354352] dma-pl330 f8003000.ps7-dma: Loaded driver for PL330 DMAC-2364208
    [ 0.354372] dma-pl330 f8003000.ps7-dma: DBUFF-128x8bytes Num_Chans-8 Num_Peri-4 Num_Events-16
    [ 0.479693] e0001000.serial: ttyPS0 at MMIO 0xe0001000 (irq = 82, base_baud = 3124999) is a xuartps
    [ 1.051305] console [ttyPS0] enabled
    [ 1.055535] xdevcfg f8007000.ps7-dev-cfg: ioremap 0xf8007000 to f0068000
    [ 1.063176] [drm] Initialized drm 1.1.0 20060810
    [ 1.080170] brd: module loaded
    [ 1.089541] loop: module loaded
    [ 1.098982] e1000e: Intel(R) PRO/1000 Network Driver - 2.3.2-k
    [ 1.104732] e1000e: Copyright(c) 1999 - 2013 Intel Corporation.
    [ 1.112552] libphy: XEMACPS mii bus: probed
    [ 1.117043] ------------- phy_id = 0x3625e62
    [ 1.121787] xemacps e000b000.ps7-ethernet: pdev->id -1, baseaddr 0xe000b000, irq 54
    [ 1.130607] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
    [ 1.137314] ehci-pci: EHCI PCI platform driver
    [ 1.144527] zynq-dr e0002000.ps7-usb: Unable to init USB phy, missing?
    [ 1.151349] usbcore: registered new interface driver usb-storage
    [ 1.158215] mousedev: PS/2 mouse device common for all mice
    [ 1.164314] i2c /dev entries driver
    [ 1.171220] zynq-edac f8006000.ps7-ddrc: ecc not enabled
    [ 1.176696] cpufreq_cpu0: failed to get cpu0 regulator: -19
    [ 1.182617] Xilinx Zynq CpuIdle Driver started
    [ 1.187504] sdhci: Secure Digital Host Controller Interface driver
    [ 1.193597] sdhci: Copyright(c) Pierre Ossman
    [ 1.197960] sdhci-pltfm: SDHCI platform and OF driver helper
    [ 1.204733] mmc0: no vqmmc regulator found
    [ 1.208820] mmc0: no vmmc regulator found
    [ 1.246745] mmc0: SDHCI controller on e0100000.ps7-sdio [e0100000.ps7-sdio] using ADMA
    [ 1.255423] usbcore: registered new interface driver usbhid
    [ 1.260930] usbhid: USB HID core driver
    [ 1.265643] nand: device found, Manufacturer ID: 0x2c, Chip ID: 0xda
    [ 1.271936] nand: Micron MT29F2G08ABAEAWP
    [ 1.275904] nand: 256MiB, SLC, page size: 2048, OOB size: 64
    [ 1.281850] Bad block table found at page 131008, version 0x01
    [ 1.288072] Bad block table found at page 130944, version 0x01
    [ 1.294121] 3 ofpart partitions found on MTD device pl353-nand
    [ 1.299907] Creating 3 MTD partitions on "pl353-nand":
    [ 1.304995] 0x000000000000-0x000002000000 : "BOOT.bin-env-dts-kernel"
    [ 1.313046] 0x000002000000-0x00000b000000 : "angstram-rootfs"
    [ 1.320377] 0x00000b000000-0x000010000000 : "upgrade-rootfs"
    [ 1.331099] TCP: cubic registered
    [ 1.334339] NET: Registered protocol family 17
    [ 1.339031] Registering SWP/SWPB emulation handler
    [ 1.344959] regulator-dummy: disabling
    [ 1.349298] UBI: attaching mtd1 to ubi0
    [ 1.730116] UBI: scanning is finished
    [ 1.741960] UBI: attached mtd1 (name "angstram-rootfs", size 144 MiB) to ubi0
    [ 1.749041] UBI: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes
    [ 1.755786] UBI: min./max. I/O unit sizes: 2048/2048, sub-page size 2048
    [ 1.762489] UBI: VID header offset: 2048 (aligned 2048), data offset: 4096
    [ 1.769347] UBI: good PEBs: 1152, bad PEBs: 0, corrupted PEBs: 0
    [ 1.775315] UBI: user volume: 1, internal volumes: 1, max. volumes count: 128
    [ 1.782447] UBI: max/mean erase counter: 1/0, WL threshold: 4096, image sequence number: 1113221046
    [ 1.791478] UBI: available PEBs: 0, total reserved PEBs: 1152, PEBs reserved for bad PEB handling: 40
    [ 1.800694] UBI: background thread "ubi_bgt0d" started, PID 1084
    [ 1.800699] drivers/rtc/hctosys.c: unable to open rtc device (rtc0)
    [ 1.804659] ALSA device list:
    [ 1.804662] No soundcards found.
    [ 1.821505] UBIFS: background thread "ubifs_bgt0_0" started, PID 1086
    [ 1.917398] UBIFS: mounted UBI device 0, volume 0, name "rootfs"
    [ 1.923328] UBIFS: LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
    [ 1.932460] UBIFS: FS size: 128626688 bytes (122 MiB, 1013 LEBs), journal size 9023488 bytes (8 MiB, 72 LEBs)
    [ 1.942345] UBIFS: reserved for root: 0 bytes (0 KiB)
    [ 1.947385] UBIFS: media format: w4/r0 (latest is w4/r0), UUID E8A4479F-B15D-4C7A-964D-0F246E2BB6ED, small LPT model
    [ 1.967800] VFS: Mounted root (ubifs filesystem) on device 0:11.
    [ 2.013854] devtmpfs: mounted
    [ 2.017092] Freeing unused kernel memory: 204K (c06db000 - c070e000)
    [ 3.066825] random: dd urandom read with 1 bits of entropy available
    [ 3.656751]
    [ 3.656751] bcm54xx_config_init
    [ 4.756738]
    [ 4.756738] bcm54xx_config_init
    [ 7.757596] xemacps e000b000.ps7-ethernet: Set clk to 24999999 Hz
    [ 7.763683] xemacps e000b000.ps7-ethernet: link up (100/FULL)
    [ 20.380131] In axi fpga driver!
    [ 20.383196] request_mem_region OK!
    [ 20.386592] AXI fpga dev virtual address is 0xf0200000
    [ 20.391721] *base_vir_addr = 0xc51e
    [ 20.406371] In fpga mem driver!
    [ 20.409748] request_mem_region OK!
    [ 20.413256] fpga mem virtual address is 0xf3000000
    [ 21.196747]
    [ 21.196747] bcm54xx_config_init
    [ 22.286751]
    [ 22.286751] bcm54xx_config_init
    [ 25.287615] xemacps e000b000.ps7-ethernet: Set clk to 24999999 Hz
    [ 25.293630] xemacps e000b000.ps7-ethernet: link up (100/FULL)
    [ 304.126514] random: nonblocking pool is initialized
    main.c:13992: log_level = 4
    main.c:14019: This is XILINX board. Totalram: 1039753216
    main.c:14025: Detect 1GB control board of XILINX
    driver-bitmain.c:1776: mmap axi_fpga_addr = 0xb6f7b000
    driver-bitmain.c:1781: axi_fpga_addr data = 0xc51e
    driver-bitmain.c:1797: mmap fpga_mem_addr = 0xb5d74000
    driver-bitmain.c:994: forceFreq=-1 forceFlag=0
    driver-bitmain.c:1696: min work minertest[0]:912


    main.c:8570: DETECT HW version=0000c51e
    main.c:14064: miner ID : 811c34c61035885c
    main.c:14089: Miner Type = S9
    main.c:14101: AsicType = 1387
    main.c:14104: real AsicNum = 63
    main.c:14197: use critical mode to search freq...
    driver-bitmain.c:1876: get PLUG ON=0x000000e0
    driver-bitmain.c:1946: Find hashboard on Chain[5]
    driver-bitmain.c:1946: Find hashboard on Chain[6]
    driver-bitmain.c:1946: Find hashboard on Chain[7]
    main.c:2282: Check chain[5] PIC fw version=0x03
    main.c:2282: Check chain[6] PIC fw version=0x03
    main.c:2282: Check chain[7] PIC fw version=0x03
    main.c:8940: read pic freq and badcore num...
    main.c:8961: chain[5]: [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255]
    main.c:9003: has freq in PIC, will disable freq setting.
    main.c:9099: chain[5] has freq in PIC and will jump over...
    main.c:9103: Chain[5] has core num in PIC
    main.c:9113: Chain[5] ASIC[0] has core num=1
    main.c:9113: Chain[5] ASIC[2] has core num=1
    main.c:9113: Chain[5] ASIC[5] has core num=1
    main.c:9113: Chain[5] ASIC[8] has core num=1
    main.c:9113: Chain[5] ASIC[11] has core num=1
    main.c:9113: Chain[5] ASIC[12] has core num=1
    main.c:9113: Chain[5] ASIC[14] has core num=1
    main.c:9113: Chain[5] ASIC[15] has core num=1
    main.c:9113: Chain[5] ASIC[17] has core num=1
    main.c:9113: Chain[5] ASIC[18] has core num=1
    main.c:9113: Chain[5] ASIC[19] has core num=1
    main.c:9113: Chain[5] ASIC[21] has core num=1
    main.c:9113: Chain[5] ASIC[22] has core num=1
    main.c:9113: Chain[5] ASIC[23] has core num=1
    main.c:9113: Chain[5] ASIC[24] has core num=1
    main.c:9113: Chain[5] ASIC[25] has core num=1
    main.c:9113: Chain[5] ASIC[26] has core num=1
    main.c:9113: Chain[5] ASIC[27] has core num=1
    main.c:9113: Chain[5] ASIC[30] has core num=1
    main.c:9113: Chain[5] ASIC[31] has core num=1
    main.c:9113: Chain[5] ASIC[32] has core num=1
    main.c:9113: Chain[5] ASIC[33] has core num=1
    main.c:9113: Chain[5] ASIC[34] has core num=1
    main.c:9113: Chain[5] ASIC[35] has core num=1
    main.c:9113: Chain[5] ASIC[36] has core num=1
    main.c:9113: Chain[5] ASIC[37] has core num=1
    main.c:9113: Chain[5] ASIC[38] has core num=1
    main.c:9113: Chain[5] ASIC[41] has core num=1
    main.c:9113: Chain[5] ASIC[43] has core num=1
    main.c:9113: Chain[5] ASIC[44] has core num=1
    main.c:9113: Chain[5] ASIC[45] has core num=1
    main.c:9113: Chain[5] ASIC[46] has core num=1
    main.c:9113: Chain[5] ASIC[47] has core num=1
    main.c:9113: Chain[5] ASIC[48] has core num=2
    main.c:9113: Chain[5] ASIC[49] has core num=1
    main.c:9113: Chain[5] ASIC[50] has core num=1
    main.c:9113: Chain[5] ASIC[51] has core num=1
    main.c:9113: Chain[5] ASIC[53] has core num=1
    main.c:9113: Chain[5] ASIC[56] has core num=1
    main.c:9113: Chain[5] ASIC[57] has core num=1
    main.c:9113: Chain[5] ASIC[58] has core num=1
    main.c:9113: Chain[5] ASIC[59] has core num=1
    main.c:9113: Chain[5] ASIC[60] has core num=1
    main.c:9113: Chain[5] ASIC[61] has core num=1
    main.c:9113: Chain[5] ASIC[62] has core num=2
    main.c:2282: Check chain[5] PIC fw version=0x03
    main.c:8940: read pic freq and badcore num...
    main.c:8961: chain[6]: [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255]
    main.c:9003: has freq in PIC, will disable freq setting.
    main.c:9099: chain[6] has freq in PIC and will jump over...
    main.c:9103: Chain[6] has core num in PIC
    main.c:9113: Chain[6] ASIC[0] has core num=1
    main.c:9113: Chain[6] ASIC[1] has core num=1
    main.c:9113: Chain[6] ASIC[2] has core num=2
    main.c:9113: Chain[6] ASIC[3] has core num=2
    main.c:9113: Chain[6] ASIC[4] has core num=3
    main.c:9113: Chain[6] ASIC[5] has core num=1
    main.c:9113: Chain[6] ASIC[6] has core num=2
    main.c:9113: Chain[6] ASIC[8] has core num=1
    main.c:9113: Chain[6] ASIC[11] has core num=2
    main.c:9113: Chain[6] ASIC[12] has core num=1
    main.c:9113: Chain[6] ASIC[13] has core num=1
    main.c:9113: Chain[6] ASIC[14] has core num=1
    main.c:9113: Chain[6] ASIC[15] has core num=2
    main.c:9113: Chain[6] ASIC[16] has core num=1
    main.c:9113: Chain[6] ASIC[17] has core num=1
    main.c:9113: Chain[6] ASIC[18] has core num=1
    main.c:9113: Chain[6] ASIC[19] has core num=2
    main.c:9113: Chain[6] ASIC[20] has core num=1
    main.c:9113: Chain[6] ASIC[21] has core num=1
    main.c:9113: Chain[6] ASIC[22] has core num=1
    main.c:9113: Chain[6] ASIC[24] has core num=2
    main.c:9113: Chain[6] ASIC[25] has core num=2
    main.c:9113: Chain[6] ASIC[26] has core num=1
    main.c:9113: Chain[6] ASIC[27] has core num=1
    main.c:9113: Chain[6] ASIC[28] has core num=1
    main.c:9113: Chain[6] ASIC[29] has core num=1
    main.c:9113: Chain[6] ASIC[30] has core num=1
    main.c:9113: Chain[6] ASIC[31] has core num=1
    main.c:9113: Chain[6] ASIC[32] has core num=1
    main.c:9113: Chain[6] ASIC[33] has core num=1
    main.c:9113: Chain[6] ASIC[34] has core num=1
    main.c:9113: Chain[6] ASIC[35] has core num=1
    main.c:9113: Chain[6] ASIC[36] has core num=1
    main.c:9113: Chain[6] ASIC[37] has core num=1
    main.c:9113: Chain[6] ASIC[38] has core num=1
    main.c:9113: Chain[6] ASIC[39] has core num=1
    main.c:9113: Chain[6] ASIC[40] has core num=1
    main.c:9113: Chain[6] ASIC[41] has core num=1
    main.c:9113: Chain[6] ASIC[42] has core num=1
    main.c:9113: Chain[6] ASIC[43] has core num=1
    main.c:9113: Chain[6] ASIC[44] has core num=1
    main.c:9113: Chain[6] ASIC[45] has core num=1
    main.c:9113: Chain[6] ASIC[46] has core num=1
    main.c:9113: Chain[6] ASIC[47] has core num=1
    main.c:9113: Chain[6] ASIC[48] has core num=1
    main.c:9113: Chain[6] ASIC[50] has core num=1
    main.c:9113: Chain[6] ASIC[51] has core num=1
    main.c:9113: Chain[6] ASIC[52] has core num=1
    main.c:9113: Chain[6] ASIC[53] has core num=1
    main.c:9113: Chain[6] ASIC[54] has core num=1
    main.c:9113: Chain[6] ASIC[55] has core num=1
    main.c:9113: Chain[6] ASIC[56] has core num=2
    main.c:9113: Chain[6] ASIC[58] has core num=1
    main.c:9113: Chain[6] ASIC[59] has core num=1
    main.c:9113: Chain[6] ASIC[60] has core num=1
    main.c:9113: Chain[6] ASIC[61] has core num=1
    main.c:9113: Chain[6] ASIC[62] has core num=1
    main.c:2282: Check chain[6] PIC fw version=0x03
    main.c:8940: read pic freq and badcore num...
    driver-bitmain.c:5051: Error of set PIC FLASH addr: addr_H=f(3) addr_L=a0(3) on Chain[7]
    driver-bitmain.c:5051: Error of set PIC FLASH addr: addr_H=f(3) addr_L=a0(3) on Chain[7]
    driver-bitmain.c:5051: Error of set PIC FLASH addr: addr_H=f(3) addr_L=a0(3) on Chain[7]
    driver-bitmain.c:5051: Error of set PIC FLASH addr: addr_H=f(3) addr_L=a0(3) on Chain[7]
    driver-bitmain.c:5051: Error of set PIC FLASH addr: addr_H=f(3) addr_L=80(3) on Chain[7]
    driver-bitmain.c:5051: Error of set PIC FLASH addr: addr_H=f(3) addr_L=80(3) on Chain[7]
    driver-bitmain.c:5051: Error of set PIC FLASH addr: addr_H=f(3) addr_L=80(3) on Chain[7]
    driver-bitmain.c:5051: Error of set PIC FLASH addr: addr_H=f(3) addr_L=80(3) on Chain[7]
    driver-bitmain.c:5051: Error of set PIC FLASH addr: addr_H=f(3) addr_L=e8(3) on Chain[7]
    driver-bitmain.c:5051: Error of set PIC FLASH addr: addr_H=f(3) addr_L=e8(3) on Chain[7]
    driver-bitmain.c:5051: Error of set PIC FLASH addr: addr_H=f(3) addr_L=e8(3) on Chain[7]
    driver-bitmain.c:5051: Error of set PIC FLASH addr: addr_H=f(3) addr_L=e8(3) on Chain[7]
    main.c:8961: chain[7]: [3:3] [3:3] [3:3] [3:3] [3:3] [3:3] [3:3] [3:3]
    main.c:9148: chain[7] has no freq in PIC! Will use default freq=500 and jump over...
    main.c:2282: Check chain[7] PIC fw version=0x03
    main.c:9183: get PIC voltage=91 on chain[5], value=890
    main.c:9183: get PIC voltage=91 on chain[6], value=890
    main.c:9183: get PIC voltage=91 on chain[7], value=890
    main.c:9349: chain[5] temp offset record: 62,0,0,0,0,0,35,28
    main.c:9366: chain[5] temp chip I2C addr=0x98
    main.c:9372: chain[5] has no middle temp, use special fix mode.
    main.c:9349: chain[6] temp offset record: 62,0,0,0,0,0,35,28
    main.c:9366: chain[6] temp chip I2C addr=0x98
    main.c:9372: chain[6] has no middle temp, use special fix mode.
    main.c:9349: chain[7] temp offset record: 28,28,28,28,28,28,28,28
    main.c:9366: chain[7] temp chip I2C addr=0x98
    main.c:13956: total_exist_chain_num = 3
    main.c:9562: CRC error counter=0
    main.c:9577: set command mode to VIL
    main.c:9649:
    --- check asic number
    main.c:9745: After Get ASIC NUM CRC error counter=0
    main.c:9768: set_baud=0
    main.c:10693: The min freq=700
    main.c:10695: set real timeout 52, need sleep=379392
    main.c:12825: After TEST CRC error counter=0
    main.c:14236: search freq for 1 times, completed chain = 3, total chain num = 3
    board_frq_tuning.c:628: single_board_frq_tuning enter
    board_frq_tuning.c:629: min_rate, des_rate, fix_volt:13800, 14000, 880
    board_frq_tuning.c:254: force_freq not set, don't need tuning
    main.c:14645: restart Miner chance num=2
    main.c:14685: waiting for receive_func to exit!
    main.c:14699: waiting for pic heart to exit!
    main.c:13927: bmminer not found= 2980 root 0:00 grep bmminer

    main.c:14758: bmminer not found, restart bmminer ...
    main.c:13927: bmminer not found=17225 root 0:00 grep bmminer

    main.c:14758: bmminer not found, restart bmminer ...
    driver-btm-c5.c:12243:bitmain_c5_init: This is user mode for mining
    driver-btm-c5.c:12286:bitmain_c5_init: Detect 1GB control board of XILINX
    driver-btm-c5.c:12313:bitmain_c5_init: Miner Type = S9
    driver-btm-c5.c:12324:bitmain_c5_init: Miner compile time: Wed Jul 31 16:18:27 CST 2019 type: Antminer S9
    driver-btm-c5.c:12414:bitmain_c5_init: miner ID : 811c34c61035885c
    driver-btm-c5.c:12571:bitmain_c5_init: Checking fans...
    driver-btm-c5.c:3006:check_fan_beforeInit: get fan[4] speed=6480
    driver-btm-c5.c:3006:check_fan_beforeInit: get fan[4] speed=6480
    driver-btm-c5.c:3006:check_fan_beforeInit: get fan[5] speed=6720
    driver-btm-c5.c:3006:check_fan_beforeInit: get fan[4] speed=6480
    driver-btm-c5.c:3006:check_fan_beforeInit: get fan[5] speed=6720
    driver-btm-c5.c:3006:check_fan_beforeInit: get fan[4] speed=6480
    driver-btm-c5.c:3006:check_fan_beforeInit: get fan[5] speed=6720
    driver-btm-c5.c:13108:bitmain_c5_init: chain[5]: [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255]
    driver-btm-c5.c:13122:bitmain_c5_init: last_freq: 0x00 0x7d 0x00 0x47 0x00 0x47 0x04 0x47 0x07 0x47 0x00 0x47 0x03 0x47 0x03 0x47 0x03 0x47 0x03 0x47 0x03 0x47 0x03 0x47 0x01 0x47 0x01 0x47 0x0f 0x47 0x0f 0x47 0x0f 0x47 0x0f 0x47 0x05 0x47 0x09 0x47 0x23 0x47 0x00 0x47 0x00 0x47 0x00 0x47 0x00 0x47 0x00 0x47 0x00 0x47 0x00 0x47 0x00 0x47 0x00 0x47 0x00 0x47 0x00 0x47 0x00 0x47 0x00 0x47 0x00 0x47 0x00 0x47 0x00 0x47 0x00 0x47 0x00 0x47 0x00 0x47 0x00 0x47 0x00 0x47 0x00 0x47 0x00 0x47 0x00 0x47 0x00 0x47 0x00 0x47 0x00 0x47 0x00 0x47 0x00 0x47 0x00 0x47 0x00 0x47 0x00 0x47 0x00 0x47 0x00 0x47 0x00 0x47 0x00 0x47 0x00 0x47 0x00 0x47 0x00 0x47 0x00 0x47 0x00 0x47 0x00 0x47 0x00 0x47
    driver-btm-c5.c:13149:bitmain_c5_init: Detect: use voltage limit rules on single board!
    driver-btm-c5.c:13155:bitmain_c5_init: Detect: S9_63 use voltage level=1 : 1
    driver-btm-c5.c:13171:bitmain_c5_init: Chain[J6] has backup chain_voltage=890
    driver-btm-c5.c:13188:bitmain_c5_init: No scan based on domain
    driver-btm-c5.c:1899:jump_to_app_CheckAndRestorePIC: Check chain[5] PIC fw version=0x03
    driver-btm-c5.c:13108:bitmain_c5_init: chain[6]: [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255]
    driver-btm-c5.c:13122:bitmain_c5_init: last_freq: 0x00 0x7d 0x00 0x48 0x00 0x48 0x04 0x48 0x08 0x48 0x00 0x48 0x03 0x48 0x03 0x48 0x03 0x48 0x03 0x48 0x03 0x48 0x03 0x48 0x01 0x48 0x01 0x48 0x0f 0x48 0x0f 0x48 0x0f 0x48 0x0f 0x48 0x05 0x48 0x09 0x48 0x23 0x48 0x00 0x48 0x00 0x48 0x00 0x48 0x00 0x48 0x00 0x48 0x00 0x48 0x00 0x48 0x00 0x48 0x00 0x48 0x00 0x48 0x00 0x48 0x00 0x48 0x00 0x48 0x00 0x48 0x00 0x48 0x00 0x48 0x00 0x48 0x00 0x48 0x00 0x48 0x00 0x48 0x00 0x48 0x00 0x48 0x00 0x48 0x00 0x48 0x00 0x48 0x00 0x48 0x00 0x48 0x00 0x48 0x00 0x48 0x00 0x48 0x00 0x48 0x00 0x48 0x00 0x48 0x00 0x48 0x00 0x48 0x00 0x48 0x00 0x48 0x00 0x48 0x00 0x48 0x00 0x48 0x00 0x48 0x00 0x48 0x00 0x48
    driver-btm-c5.c:13149:bitmain_c5_init: Detect: use voltage limit rules on single board!
    driver-btm-c5.c:13155:bitmain_c5_init: Detect: S9_63 use voltage level=1 : 1
    driver-btm-c5.c:13171:bitmain_c5_init: Chain[J7] has backup chain_voltage=890
    driver-btm-c5.c:13188:bitmain_c5_init: No scan based on domain
    driver-btm-c5.c:1899:jump_to_app_CheckAndRestorePIC: Check chain[6] PIC fw version=0x03
    driver-btm-c5.c:1326:set_pic_iic_flash_addr_pointer: Error of set PIC FLASH addr: addr_H=f(3) addr_L=e8(3) on Chain[7]
    driver-btm-c5.c:1326:set_pic_iic_flash_addr_pointer: Error of set PIC FLASH addr: addr_H=f(3) addr_L=e8(3) on Chain[7]
    driver-btm-c5.c:1326:set_pic_iic_flash_addr_pointer: Error of set PIC FLASH addr: addr_H=f(3) addr_L=e8(3) on Chain[7]
    driver-btm-c5.c:1326:set_pic_iic_flash_addr_pointer: Error of set PIC FLASH addr: addr_H=f(3) addr_L=e8(3) on Chain[7]
    driver-btm-c5.c:13108:bitmain_c5_init: chain[7]: [3:3] [3:3] [3:3] [3:3] [3:3] [3:3] [3:3] [3:3]
    driver-btm-c5.c:1326:set_pic_iic_flash_addr_pointer: Error of set PIC FLASH addr: addr_H=f(3) addr_L=a0(3) on Chain[7]
    driver-btm-c5.c:1326:set_pic_iic_flash_addr_pointer: Error of set PIC FLASH addr: addr_H=f(3) addr_L=a0(3) on Chain[7]
    driver-btm-c5.c:1326:set_pic_iic_flash_addr_pointer: Error of set PIC FLASH addr: addr_H=f(3) addr_L=a0(3) on Chain[7]
    driver-btm-c5.c:1326:set_pic_iic_flash_addr_pointer: Error of set PIC FLASH addr: addr_H=f(3) addr_L=a0(3) on Chain[7]
    driver-btm-c5.c:13122:bitmain_c5_init: last_freq: 0x03 0x03 0x03 0x03 0x03 0x03 0x03 0x03 0x03 0x03 0x03 0x03 0x03 0x03 0x03 0x03 0x03 0x03 0x03 0x03 0x03 0x03 0x03 0x03 0x03 0x03 0x03 0x03 0x03 0x03 0x03 0x03 0x03 0x03 0x03 0x03 0x03 0x03 0x03 0x03 0x03 0x03 0x03 0x03 0x03 0x03 0x03 0x03 0x03 0x03 0x03 0x03 0x03 0x03 0x03 0x03 0x03 0x03 0x03 0x03 0x03 0x03 0x03 0x03 0x03 0x03 0x03 0x03 0x03 0x03 0x03 0x03 0x03 0x03 0x03 0x03 0x03 0x03 0x03 0x03 0x03 0x03 0x03 0x03 0x03 0x03 0x03 0x03 0x03 0x03 0x03 0x03 0x03 0x03 0x03 0x03 0x03 0x03 0x03 0x03 0x03 0x03 0x03 0x03 0x03 0x03 0x03 0x03 0x03 0x03 0x03 0x03 0x03 0x03 0x03 0x03 0x03 0x03 0x03 0x03 0x03 0x03 0x03 0x03 0x03 0x03 0x03 0x03
    driver-btm-c5.c:1326:set_pic_iic_flash_addr_pointer: Error of set PIC FLASH addr: addr_H=f(3) addr_L=80(3) on Chain[7]
    driver-btm-c5.c:1326:set_pic_iic_flash_addr_pointer: Error of set PIC FLASH addr: addr_H=f(3) addr_L=80(3) on Chain[7]
    driver-btm-c5.c:1326:set_pic_iic_flash_addr_pointer: Error of set PIC FLASH addr: addr_H=f(3) addr_L=80(3) on Chain[7]
    driver-btm-c5.c:1326:set_pic_iic_flash_addr_pointer: Error of set PIC FLASH addr: addr_H=f(3) addr_L=80(3) on Chain[7]
    driver-btm-c5.c:13193:bitmain_c5_init: scan based on domain
    driver-btm-c5.c:1899:jump_to_app_CheckAndRestorePIC: Check chain[7] PIC fw version=0x03
    driver-btm-c5.c:12195:init_exist_chain_table: total_exist_chain_num = 3
    driver-btm-c5.c:13303:bitmain_c5_init: Chain[J6] orignal chain_voltage_pic=91 value=890
    driver-btm-c5.c:13303:bitmain_c5_init: Chain[J7] orignal chain_voltage_pic=91 value=890
    driver-btm-c5.c:13303:bitmain_c5_init: Chain[J8] orignal chain_voltage_pic=91 value=890
    driver-btm-c5.c:13421:bitmain_c5_init: Chain[J6] has 63 asic
    driver-btm-c5.c:13421:bitmain_c5_init: Chain[J7] has 63 asic
    driver-btm-c5.c:13421:bitmain_c5_init: Chain[J8] has 0 asic
    driver-btm-c5.c:13449:bitmain_c5_init: retry Chain[J8] has 0 asic
    driver-btm-c5.c:13449:bitmain_c5_init: retry Chain[J8] has 0 asic
    driver-btm-c5.c:13449:bitmain_c5_init: retry Chain[J8] has 0 asic
    driver-btm-c5.c:13449:bitmain_c5_init: retry Chain[J8] has 0 asic
    driver-btm-c5.c:13449:bitmain_c5_init: retry Chain[J8] has 0 asic
    driver-btm-c5.c:13449:bitmain_c5_init: retry Chain[J8] has 0 asic
    driver-btm-c5.c:4531:set_frequency: Chain[J6] has core num in PIC
    driver-btm-c5.c:4541:set_frequency: Chain[J6] ASIC[0] has core num=1
    driver-btm-c5.c:4541:set_frequency: Chain[J6] ASIC[2] has core num=1
    driver-btm-c5.c:4541:set_frequency: Chain[J6] ASIC[5] has core num=1
    driver-btm-c5.c:4541:set_frequency: Chain[J6] ASIC[8] has core num=1
    driver-btm-c5.c:4541:set_frequency: Chain[J6] ASIC[11] has core num=1
    driver-btm-c5.c:4541:set_frequency: Chain[J6] ASIC[12] has core num=1
    driver-btm-c5.c:4541:set_frequency: Chain[J6] ASIC[14] has core num=1
    driver-btm-c5.c:4541:set_frequency: Chain[J6] ASIC[15] has core num=1
    driver-btm-c5.c:4541:set_frequency: Chain[J6] ASIC[17] has core num=1
    driver-btm-c5.c:4541:set_frequency: Chain[J6] ASIC[18] has core num=1
    driver-btm-c5.c:4541:set_frequency: Chain[J6] ASIC[19] has core num=1
    driver-btm-c5.c:4541:set_frequency: Chain[J6] ASIC[21] has core num=1
    driver-btm-c5.c:4541:set_frequency: Chain[J6] ASIC[22] has core num=1
    driver-btm-c5.c:4541:set_frequency: Chain[J6] ASIC[23] has core num=1
    driver-btm-c5.c:4541:set_frequency: Chain[J6] ASIC[24] has core num=1
    driver-btm-c5.c:4541:set_frequency: Chain[J6] ASIC[25] has core num=1
    driver-btm-c5.c:4541:set_frequency: Chain[J6] ASIC[26] has core num=1
    driver-btm-c5.c:4541:set_frequency: Chain[J6] ASIC[27] has core num=1
    driver-btm-c5.c:4541:set_frequency: Chain[J6] ASIC[30] has core num=1
    driver-btm-c5.c:4541:set_frequency: Chain[J6] ASIC[31] has core num=1
    driver-btm-c5.c:4541:set_frequency: Chain[J6] ASIC[32] has core num=1
    driver-btm-c5.c:4541:set_frequency: Chain[J6] ASIC[33] has core num=1
    driver-btm-c5.c:4541:set_frequency: Chain[J6] ASIC[34] has core num=1
    driver-btm-c5.c:4541:set_frequency: Chain[J6] ASIC[35] has core num=1
    driver-btm-c5.c:4541:set_frequency: Chain[J6] ASIC[36] has core num=1
    driver-btm-c5.c:4541:set_frequency: Chain[J6] ASIC[37] has core num=1
    driver-btm-c5.c:4541:set_frequency: Chain[J6] ASIC[38] has core num=1
    driver-btm-c5.c:4541:set_frequency: Chain[J6] ASIC[41] has core num=1
    driver-btm-c5.c:4541:set_frequency: Chain[J6] ASIC[43] has core num=1
    driver-btm-c5.c:4541:set_frequency: Chain[J6] ASIC[44] has core num=1
    driver-btm-c5.c:4541:set_frequency: Chain[J6] ASIC[45] has core num=1
    driver-btm-c5.c:4541:set_frequency: Chain[J6] ASIC[46] has core num=1
    driver-btm-c5.c:4541:set_frequency: Chain[J6] ASIC[47] has core num=1
    driver-btm-c5.c:4541:set_frequency: Chain[J6] ASIC[48] has core num=2
    driver-btm-c5.c:4541:set_frequency: Chain[J6] ASIC[49] has core num=1
    driver-btm-c5.c:4541:set_frequency: Chain[J6] ASIC[50] has core num=1
    driver-btm-c5.c:4541:set_frequency: Chain[J6] ASIC[51] has core num=1
    driver-btm-c5.c:4541:set_frequency: Chain[J6] ASIC[53] has core num=1
    driver-btm-c5.c:4541:set_frequency: Chain[J6] ASIC[56] has core num=1
    driver-btm-c5.c:4541:set_frequency: Chain[J6] ASIC[57] has core num=1
    driver-btm-c5.c:4541:set_frequency: Chain[J6] ASIC[58] has core num=1
    driver-btm-c5.c:4541:set_frequency: Chain[J6] ASIC[59] has core num=1
    driver-btm-c5.c:4541:set_frequency: Chain[J6] ASIC[60] has core num=1
    driver-btm-c5.c:4541:set_frequency: Chain[J6] ASIC[61] has core num=1
    driver-btm-c5.c:4541:set_frequency: Chain[J6] ASIC[62] has core num=2
    driver-btm-c5.c:4531:set_frequency: Chain[J7] has core num in PIC
    driver-btm-c5.c:4541:set_frequency: Chain[J7] ASIC[0] has core num=1
    driver-btm-c5.c:4541:set_frequency: Chain[J7] ASIC[1] has core num=1
    driver-btm-c5.c:4541:set_frequency: Chain[J7] ASIC[2] has core num=2
    driver-btm-c5.c:4541:set_frequency: Chain[J7] ASIC[3] has core num=2
    driver-btm-c5.c:4541:set_frequency: Chain[J7] ASIC[4] has core num=3
    driver-btm-c5.c:4541:set_frequency: Chain[J7] ASIC[5] has core num=1
    driver-btm-c5.c:4541:set_frequency: Chain[J7] ASIC[6] has core num=2
    driver-btm-c5.c:4541:set_frequency: Chain[J7] ASIC[8] has core num=1
    driver-btm-c5.c:4541:set_frequency: Chain[J7] ASIC[11] has core num=2
    driver-btm-c5.c:4541:set_frequency: Chain[J7] ASIC[12] has core num=1
    driver-btm-c5.c:4541:set_frequency: Chain[J7] ASIC[13] has core num=1
    driver-btm-c5.c:4541:set_frequency: Chain[J7] ASIC[14] has core num=1
    driver-btm-c5.c:4541:set_frequency: Chain[J7] ASIC[15] has core num=2
    driver-btm-c5.c:4541:set_frequency: Chain[J7] ASIC[16] has core num=1
    driver-btm-c5.c:4541:set_frequency: Chain[J7] ASIC[17] has core num=1
    driver-btm-c5.c:4541:set_frequency: Chain[J7] ASIC[18] has core num=1
    driver-btm-c5.c:4541:set_frequency: Chain[J7] ASIC[19] has core num=2
    driver-btm-c5.c:4541:set_frequency: Chain[J7] ASIC[20] has core num=1
    driver-btm-c5.c:4541:set_frequency: Chain[J7] ASIC[21] has core num=1
    driver-btm-c5.c:4541:set_frequency: Chain[J7] ASIC[22] has core num=1
    driver-btm-c5.c:4541:set_frequency: Chain[J7] ASIC[24] has core num=2
    driver-btm-c5.c:4541:set_frequency: Chain[J7] ASIC[25] has core num=2
    driver-btm-c5.c:4541:set_frequency: Chain[J7] ASIC[26] has core num=1
    driver-btm-c5.c:4541:set_frequency: Chain[J7] ASIC[27] has core num=1
    driver-btm-c5.c:4541:set_frequency: Chain[J7] ASIC[28] has core num=1
    driver-btm-c5.c:4541:set_frequency: Chain[J7] ASIC[29] has core num=1
    driver-btm-c5.c:4541:set_frequency: Chain[J7] ASIC[30] has core num=1
    driver-btm-c5.c:4541:set_frequency: Chain[J7] ASIC[31] has core num=1
    driver-btm-c5.c:4541:set_frequency: Chain[J7] ASIC[32] has core num=1
    driver-btm-c5.c:4541:set_frequency: Chain[J7] ASIC[33] has core num=1
    driver-btm-c5.c:4541:set_frequency: Chain[J7] ASIC[34] has core num=1
    driver-btm-c5.c:4541:set_frequency: Chain[J7] ASIC[35] has core num=1
    driver-btm-c5.c:4541:set_frequency: Chain[J7] ASIC[36] has core num=1
    driver-btm-c5.c:4541:set_frequency: Chain[J7] ASIC[37] has core num=1
    driver-btm-c5.c:4541:set_frequency: Chain[J7] ASIC[38] has core num=1
    driver-btm-c5.c:4541:set_frequency: Chain[J7] ASIC[39] has core num=1
    driver-btm-c5.c:4541:set_frequency: Chain[J7] ASIC[40] has core num=1
    driver-btm-c5.c:4541:set_frequency: Chain[J7] ASIC[41] has core num=1
    driver-btm-c5.c:4541:set_frequency: Chain[J7] ASIC[42] has core num=1
    driver-btm-c5.c:4541:set_frequency: Chain[J7] ASIC[43] has core num=1
    driver-btm-c5.c:4541:set_frequency: Chain[J7] ASIC[44] has core num=1
    driver-btm-c5.c:4541:set_frequency: Chain[J7] ASIC[45] has core num=1
    driver-btm-c5.c:4541:set_frequency: Chain[J7] ASIC[46] has core num=1
    driver-btm-c5.c:4541:set_frequency: Chain[J7] ASIC[47] has core num=1
    driver-btm-c5.c:4541:set_frequency: Chain[J7] ASIC[48] has core num=1
    driver-btm-c5.c:4541:set_frequency: Chain[J7] ASIC[50] has core num=1
    driver-btm-c5.c:4541:set_frequency: Chain[J7] ASIC[51] has core num=1
    driver-btm-c5.c:4541:set_frequency: Chain[J7] ASIC[52] has core num=1
    driver-btm-c5.c:4541:set_frequency: Chain[J7] ASIC[53] has core num=1
    driver-btm-c5.c:4541:set_frequency: Chain[J7] ASIC[54] has core num=1
    driver-btm-c5.c:4541:set_frequency: Chain[J7] ASIC[55] has core num=1
    driver-btm-c5.c:4541:set_frequency: Chain[J7] ASIC[56] has core num=2
    driver-btm-c5.c:4541:set_frequency: Chain[J7] ASIC[58] has core num=1
    driver-btm-c5.c:4541:set_frequency: Chain[J7] ASIC[59] has core num=1
    driver-btm-c5.c:4541:set_frequency: Chain[J7] ASIC[60] has core num=1
    driver-btm-c5.c:4541:set_frequency: Chain[J7] ASIC[61] has core num=1
    driver-btm-c5.c:4541:set_frequency: Chain[J7] ASIC[62] has core num=1
    driver-btm-c5.c:4571:set_frequency: miner total rate=9033GH/s ideal_total_hash_rate = 9000GH/s
    driver-btm-c5.c:4596:set_frequency: read PIC voltage=940 on chain[5]
    driver-btm-c5.c:4598:set_frequency: Chain:5 chipnum=63
    driver-btm-c5.c:4618:set_frequency: Chain[J6] voltage added=0.0V
    driver-btm-c5.c:4768:set_frequency: Chain:5 temp offset=0
    driver-btm-c5.c:4773:set_frequency: Chain:5 base freq=631
    Asic[ 0]:631 Asic[ 1]:631 Asic[ 2]:631 Asic[ 3]:631 Asic[ 4]:631 Asic[ 5]:631 Asic[ 6]:631 Asic[ 7]:631
    Asic[ 8]:631 Asic[ 9]:631 Asic[10]:631 Asic[11]:631 Asic[12]:631 Asic[13]:631 Asic[14]:631 Asic[15]:631
    Asic[16]:631 Asic[17]:631 Asic[18]:631 Asic[19]:631 Asic[20]:631 Asic[21]:631 Asic[22]:631 Asic[23]:631
    Asic[24]:631 Asic[25]:631 Asic[26]:631 Asic[27]:631 Asic[28]:631 Asic[29]:631 Asic[30]:631 Asic[31]:631
    Asic[32]:631 Asic[33]:631 Asic[34]:631 Asic[35]:631 Asic[36]:631 Asic[37]:631 Asic[38]:631 Asic[39]:631
    Asic[40]:631 Asic[41]:631 Asic[42]:631 Asic[43]:631 Asic[44]:631 Asic[45]:631 Asic[46]:631 Asic[47]:631
    Asic[48]:631 Asic[49]:631 Asic[50]:631 Asic[51]:631 Asic[52]:631 Asic[53]:631 Asic[54]:631 Asic[55]:631
    Asic[56]:631 Asic[57]:631 Asic[58]:631 Asic[59]:631 Asic[60]:631 Asic[61]:631 Asic[62]:631
    driver-btm-c5.c:4809:set_frequency: Chain:5 max freq=631
    driver-btm-c5.c:4810:set_frequency: Chain:5 min freq=631

    driver-btm-c5.c:4596:set_frequency: read PIC voltage=940 on chain[6]
    driver-btm-c5.c:4598:set_frequency: Chain:6 chipnum=63
    driver-btm-c5.c:4618:set_frequency: Chain[J7] voltage added=0.0V
    driver-btm-c5.c:4768:set_frequency: Chain:6 temp offset=0
    driver-btm-c5.c:4773:set_frequency: Chain:6 base freq=637
    Asic[ 0]:637 Asic[ 1]:637 Asic[ 2]:637 Asic[ 3]:637 Asic[ 4]:637 Asic[ 5]:637 Asic[ 6]:637 Asic[ 7]:637
    Asic[ 8]:637 Asic[ 9]:637 Asic[10]:637 Asic[11]:637 Asic[12]:637 Asic[13]:637 Asic[14]:637 Asic[15]:637
    Asic[16]:637 Asic[17]:637 Asic[18]:637 Asic[19]:637 Asic[20]:637 Asic[21]:637 Asic[22]:637 Asic[23]:637
    Asic[24]:637 Asic[25]:637 Asic[26]:637 Asic[27]:637 Asic[28]:637 Asic[29]:637 Asic[30]:637 Asic[31]:637
    Asic[32]:637 Asic[33]:637 Asic[34]:637 Asic[35]:637 Asic[36]:637 Asic[37]:637 Asic[38]:637 Asic[39]:637
    Asic[40]:637 Asic[41]:637 Asic[42]:637 Asic[43]:637 Asic[44]:637 Asic[45]:637 Asic[46]:637 Asic[47]:637
    Asic[48]:637 Asic[49]:637 Asic[50]:637 Asic[51]:637 Asic[52]:637 Asic[53]:637 Asic[54]:637 Asic[55]:637
    Asic[56]:637 Asic[57]:637 Asic[58]:637 Asic[59]:637 Asic[60]:637 Asic[61]:637 Asic[62]:637
    driver-btm-c5.c:4809:set_frequency: Chain:6 max freq=637
    driver-btm-c5.c:4810:set_frequency: Chain:6 min freq=637


    driver-btm-c5.c:4819:set_frequency: Miner fix freq ...
    driver-btm-c5.c:4854:set_frequency: read PIC voltage=940 on chain[5]
    driver-btm-c5.c:4855:set_frequency: Chain:5 chipnum=63
    driver-btm-c5.c:4874:set_frequency: Chain[J6] voltage added=0.0V
    driver-btm-c5.c:5058:set_frequency: Chain:5 temp offset=0
    driver-btm-c5.c:5063:set_frequency: Chain:5 base freq=631
    Asic[ 0]:631 Asic[ 1]:631 Asic[ 2]:631 Asic[ 3]:631 Asic[ 4]:631 Asic[ 5]:631 Asic[ 6]:631 Asic[ 7]:631
    Asic[ 8]:631 Asic[ 9]:631 Asic[10]:631 Asic[11]:631 Asic[12]:631 Asic[13]:631 Asic[14]:631 Asic[15]:631
    Asic[16]:631 Asic[17]:631 Asic[18]:631 Asic[19]:631 Asic[20]:631 Asic[21]:631 Asic[22]:631 Asic[23]:631
    Asic[24]:631 Asic[25]:631 Asic[26]:631 Asic[27]:631 Asic[28]:631 Asic[29]:631 Asic[30]:631 Asic[31]:631
    Asic[32]:631 Asic[33]:631 Asic[34]:631 Asic[35]:631 Asic[36]:631 Asic[37]:631 Asic[38]:631 Asic[39]:631
    Asic[40]:631 Asic[41]:631 Asic[42]:631 Asic[43]:631 Asic[44]:631 Asic[45]:631 Asic[46]:631 Asic[47]:631
    Asic[48]:631 Asic[49]:631 Asic[50]:631 Asic[51]:631 Asic[52]:631 Asic[53]:631 Asic[54]:631 Asic[55]:631
    Asic[56]:631 Asic[57]:631 Asic[58]:631 Asic[59]:631 Asic[60]:631 Asic[61]:631 Asic[62]:631
    driver-btm-c5.c:5110:set_frequency: Chain:5 max freq=631
    driver-btm-c5.c:5111:set_frequency: Chain:5 min freq=631

    driver-btm-c5.c:4854:set_frequency: read PIC voltage=940 on chain[6]
    driver-btm-c5.c:4855:set_frequency: Chain:6 chipnum=63
    driver-btm-c5.c:4874:set_frequency: Chain[J7] voltage added=0.0V
    driver-btm-c5.c:5058:set_frequency: Chain:6 temp offset=0
    driver-btm-c5.c:5063:set_frequency: Chain:6 base freq=637
    Asic[ 0]:637 Asic[ 1]:637 Asic[ 2]:637 Asic[ 3]:637 Asic[ 4]:637 Asic[ 5]:637 Asic[ 6]:637 Asic[ 7]:637
    Asic[ 8]:637 Asic[ 9]:637 Asic[10]:637 Asic[11]:637 Asic[12]:637 Asic[13]:637 Asic[14]:637 Asic[15]:637
    Asic[16]:637 Asic[17]:637 Asic[18]:637 Asic[19]:637 Asic[20]:637 Asic[21]:637 Asic[22]:637 Asic[23]:637
    Asic[24]:637 Asic[25]:637 Asic[26]:637 Asic[27]:637 Asic[28]:637 Asic[29]:637 Asic[30]:637 Asic[31]:637
    Asic[32]:637 Asic[33]:637 Asic[34]:637 Asic[35]:637 Asic[36]:637 Asic[37]:637 Asic[38]:637 Asic[39]:637
    Asic[40]:637 Asic[41]:637 Asic[42]:637 Asic[43]:637 Asic[44]:637 Asic[45]:637 Asic[46]:637 Asic[47]:637
    Asic[48]:637 Asic[49]:637 Asic[50]:637 Asic[51]:637 Asic[52]:637 Asic[53]:637 Asic[54]:637 Asic[55]:637
    Asic[56]:637 Asic[57]:637 Asic[58]:637 Asic[59]:637 Asic[60]:637 Asic[61]:637 Asic[62]:637
    driver-btm-c5.c:5110:set_frequency: Chain:6 max freq=637
    driver-btm-c5.c:5111:set_frequency: Chain:6 min freq=637

    driver-btm-c5.c:5119:set_frequency: max freq = 637
    driver-btm-c5.c:4162:ProcessFixFreq: totalRate = 9033, fixed_totalRate = 9000
    driver-btm-c5.c:9604:init_uart_baud: set baud=1
    driver-btm-c5.c:6593:calibration_sensor_offset: Chain[J6] PIC temp offset: 62,0,0,0,0,0,35,28,0,0,0,0,0,0,0,0,0,0,
    driver-btm-c5.c:6627:calibration_sensor_offset: chain[6] temp chip I2C addr=0x98
    driver-btm-c5.c:6635:calibration_sensor_offset: chain[6] has no middle temp, use special fix mode.
    driver-btm-c5.c:6660:calibration_sensor_offset: Chain[J6] chip[244] use PIC middle temp offset=0 typeID=1a
    driver-btm-c5.c:6377:do_calibration_sensor_offset: Warning: Chain[5] chip[244] local:33 remote:127 offset:-63, will fixed offset=27
    driver-btm-c5.c:6384:do_calibration_sensor_offset: New offset Chain[6] chip[244] local:33 remote:127 offset:27
    driver-btm-c5.c:6753:calibration_sensor_offset: Chain[J6] chip[244] get middle temp offset=27 typeID=1a
    driver-btm-c5.c:6593:calibration_sensor_offset: Chain[J7] PIC temp offset: 62,0,0,0,0,0,35,28,0,0,0,0,0,0,0,0,0,0,
    driver-btm-c5.c:6627:calibration_sensor_offset: chain[7] temp chip I2C addr=0x98
    driver-btm-c5.c:6635:calibration_sensor_offset: chain[7] has no middle temp, use special fix mode.
    driver-btm-c5.c:6660:calibration_sensor_offset: Chain[J7] chip[244] use PIC middle temp offset=0 typeID=1a
    driver-btm-c5.c:6377:do_calibration_sensor_offset: Warning: Chain[6] chip[244] local:34 remote:123 offset:-57, will fixed offset=27
    driver-btm-c5.c:6384:do_calibration_sensor_offset: New offset Chain[7] chip[244] local:34 remote:123 offset:27
    driver-btm-c5.c:6753:calibration_sensor_offset: Chain[J7] chip[244] get middle temp offset=27 typeID=1a
    driver-btm-c5.c:13751:bitmain_c5_init: open core three times
    driver-btm-c5.c:13751:bitmain_c5_init: open core three times
    driver-btm-c5.c:12103:set_working_voltage: setting to working voltage...
    driver-btm-c5.c:12083:slowly_downgrade_voltage_all_chain: chain[5] set voltage to 930
    driver-btm-c5.c:12083:slowly_downgrade_voltage_all_chain: chain[6] set voltage to 930
    driver-btm-c5.c:12083:slowly_downgrade_voltage_all_chain: chain[5] set voltage to 920
    driver-btm-c5.c:12083:slowly_downgrade_voltage_all_chain: chain[6] set voltage to 920
    driver-btm-c5.c:12083:slowly_downgrade_voltage_all_chain: chain[5] set voltage to 910
    driver-btm-c5.c:12083:slowly_downgrade_voltage_all_chain: chain[6] set voltage to 910
    driver-btm-c5.c:12083:slowly_downgrade_voltage_all_chain: chain[5] set voltage to 900
    driver-btm-c5.c:12083:slowly_downgrade_voltage_all_chain: chain[6] set voltage to 900
    driver-btm-c5.c:12083:slowly_downgrade_voltage_all_chain: chain[5] set voltage to 890
    driver-btm-c5.c:12083:slowly_downgrade_voltage_all_chain: chain[6] set voltage to 890
    driver-btm-c5.c:13954:bitmain_c5_init: start thread for read temp
    setStartTimePoint total_tv_start_sys=1723 total_tv_end_sys=1724
    driver-btm-c5.c:10320:check_system_work: restartNum = 2 , auto-reinit enabled...
    driver-btm-c5.c:8727:read_temp_func: bring_up_pcb_temp = 50
    driver-btm-c5.c:12103:set_working_voltage: setting to working voltage...
    driver-btm-c5.c:10487:check_system_work: voltage_check_done
    driver-btm-c5.c:9887:if_avg_hash_ok: avg hash rate = 9199.244842, ideal hash rate = 9000
    driver-btm-c5.c:10382:check_system_work: hash rate is ok now
    driver-btm-c5.c:10200:check_avg_rate: avg_rate = 9121, ideal_total_hash_rate = 9000
    driver-btm-c5.c:10205:check_avg_rate: avg hash rate is OK
    do read_temp_func once...

    get RT hashrate from Chain[5]: (asic index start from 1-63)
    Asic[01]=70.7150 Asic[02]=73.6850 Asic[03]=69.4910 Asic[04]=72.1420 Asic[05]=68.7020 Asic[06]=70.1950 Asic[07]=71.1680 Asic[08]=72.0580
    Asic[09]=73.9200 Asic[10]=72.8630 Asic[11]=72.4770 Asic[12]=69.7420 Asic[13]=67.9300 Asic[14]=74.9770 Asic[15]=72.4440 Asic[16]=73.3490
    Asic[17]=72.5780 Asic[18]=75.1610 Asic[19]=73.1980 Asic[20]=70.6820 Asic[21]=69.6250 Asic[22]=61.8570 Asic[23]=71.3870 Asic[24]=71.5380
    Asic[25]=73.1480 Asic[26]=72.0740 Asic[27]=66.4710 Asic[28]=72.2760 Asic[29]=74.4060 Asic[30]=67.6120 Asic[31]=67.4440 Asic[32]=71.1010
    Asic[33]=70.2290 Asic[34]=71.9910 Asic[35]=68.8200 Asic[36]=72.9300 Asic[37]=73.7690 Asic[38]=76.3530 Asic[39]=71.7220 Asic[40]=68.1320
    Asic[41]=72.6950 Asic[42]=73.4330 Asic[43]=69.4070 Asic[44]=67.0240 Asic[45]=69.5910 Asic[46]=71.7050 Asic[47]=74.9940 Asic[48]=72.7120
    Asic[49]=70.3130 Asic[50]=70.0950 Asic[51]=75.0270 Asic[52]=69.2890 Asic[53]=66.6890 Asic[54]=70.7660 Asic[55]=72.6780 Asic[56]=72.5110
    Asic[57]=68.0310 Asic[58]=73.7020 Asic[59]=73.8700 Asic[60]=69.9770 Asic[61]=76.8390 Asic[62]=73.5840 Asic[63]=67.0750

    get RT hashrate from Chain[6]: (asic index start from 1-63)
    Asic[01]=70.2120 Asic[02]=72.0740 Asic[03]=75.1950 Asic[04]=69.6080 Asic[05]=69.5580 Asic[06]=69.1380 Asic[07]=70.2790 Asic[08]=66.8570
    Asic[09]=72.3090 Asic[10]=77.9630 Asic[11]=71.5380 Asic[12]=66.6550 Asic[13]=70.0110 Asic[14]=74.3230 Asic[15]=73.1150 Asic[16]=67.1750
    Asic[17]=72.8290 Asic[18]=73.9030 Asic[19]=77.1240 Asic[20]=71.8560 Asic[21]=71.3360 Asic[22]=75.4470 Asic[23]=69.2730 Asic[24]=71.7220
    Asic[25]=72.3930 Asic[26]=72.1750 Asic[27]=69.6750 Asic[28]=67.8470 Asic[29]=72.7960 Asic[30]=76.8730 Asic[31]=68.3670 Asic[32]=70.9670
    Asic[33]=72.3430 Asic[34]=68.5340 Asic[35]=70.0440 Asic[36]=74.6410 Asic[37]=71.3700 Asic[38]=71.0010 Asic[39]=69.4910 Asic[40]=70.4640
    Asic[41]=70.0780 Asic[42]=78.2990 Asic[43]=72.0740 Asic[44]=73.6850 Asic[45]=74.9430 Asic[46]=70.8500 Asic[47]=73.5000 Asic[48]=73.5340
    Asic[49]=71.2190 Asic[50]=66.3030 Asic[51]=70.8830 Asic[52]=69.2060 Asic[53]=74.2220 Asic[54]=70.4810 Asic[55]=75.9160 Asic[56]=71.5710
    Asic[57]=70.9340 Asic[58]=69.7090 Asic[59]=70.2620 Asic[60]=70.5980 Asic[61]=72.2760 Asic[62]=77.2250 Asic[63]=73.8190
    Check Chain[J6] ASIC RT error: (asic index start from 1-63)
    Check Chain[J7] ASIC RT error: (asic index start from 1-63)
    Done check_asic_reg
    Chain[5] Chip[244] pcb temperature=60
    read failed on Chain[5] Chip[62] middle Temp old value:75
    Special fix Chain[5] Chip[62] middle Temp = 75
    Done read temp on Chain[5]
    Chain[6] Chip[244] pcb temperature=56
    read failed on Chain[6] Chip[62] middle Temp old value:71
    Special fix Chain[6] Chip[62] middle Temp = 71
    Done read temp on Chain[6]
    Max pcb temp : 60
    set FAN speed according to: temp_highest=60 temp_top1[PWM_T]=60 temp_top1[TEMP_POS_LOCAL]=60 temp_change=1 fix_fan_steps=0
    FAN PWM: 68
    read_temp_func Done!
    CRC error counter=0

    Please advise, thanks,

    Mursid

    0
    Comment actions Permalink

    Hi Luke,

    I changed the algorithm to sha256asicboost and it became normal again.

    Please advise, if we can optimize it some more.

     

    [ 0.000000] Booting Linux on physical CPU 0x0
    [ 0.000000] Linux version 3.14.0-xilinx-g16220c3 (lzq@armdev2) (gcc version 4.8.3 20140320 (prerelease) (Sourcery CodeBench Lite 2014.05-23) ) #83 SMP PREEMPT Thu Jul 12 11:42:53 CST 2018
    [ 0.000000] CPU: ARMv7 Processor [413fc090] revision 0 (ARMv7), cr=18c5387d
    [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
    [ 0.000000] Machine model: Xilinx Zynq
    [ 0.000000] cma: CMA: reserved 128 MiB at 27800000
    [ 0.000000] Memory policy: Data cache writealloc
    [ 0.000000] On node 0 totalpages: 258048
    [ 0.000000] free_area_init_node: node 0, pgdat c074ac00, node_mem_map e6fd8000
    [ 0.000000] Normal zone: 1520 pages used for memmap
    [ 0.000000] Normal zone: 0 pages reserved
    [ 0.000000] Normal zone: 194560 pages, LIFO batch:31
    [ 0.000000] HighMem zone: 496 pages used for memmap
    [ 0.000000] HighMem zone: 63488 pages, LIFO batch:15
    [ 0.000000] PERCPU: Embedded 8 pages/cpu @e6fc0000 s9088 r8192 d15488 u32768
    [ 0.000000] pcpu-alloc: s9088 r8192 d15488 u32768 alloc=8*4096
    [ 0.000000] pcpu-alloc: [0] 0 [0] 1
    [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 256528
    [ 0.000000] Kernel command line: noinitrd mem=1008M console=ttyPS0,115200 root=ubi0:rootfs ubi.mtd=1 rootfstype=ubifs rw rootwait
    [ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
    [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
    [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
    [ 0.000000] Memory: 884108K/1032192K available (5057K kernel code, 284K rwdata, 1928K rodata, 204K init, 258K bss, 148084K reserved, 253952K highmem)
    [ 0.000000] Virtual kernel memory layout:
    [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
    [ 0.000000] fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
    [ 0.000000] vmalloc : 0xf0000000 - 0xff000000 ( 240 MB)
    [ 0.000000] lowmem : 0xc0000000 - 0xef800000 ( 760 MB)
    [ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
    [ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB)
    [ 0.000000] .text : 0xc0008000 - 0xc06da8ac (6987 kB)
    [ 0.000000] .init : 0xc06db000 - 0xc070e380 ( 205 kB)
    [ 0.000000] .data : 0xc0710000 - 0xc0757138 ( 285 kB)
    [ 0.000000] .bss : 0xc0757144 - 0xc0797bfc ( 259 kB)
    [ 0.000000] Preemptible hierarchical RCU implementation.
    [ 0.000000] Dump stacks of tasks blocking RCU-preempt GP.
    [ 0.000000] RCU restricting CPUs from NR_CPUS=4 to nr_cpu_ids=2.
    [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2
    [ 0.000000] NR_IRQS:16 nr_irqs:16 16
    [ 0.000000] ps7-slcr mapped to f0004000
    [ 0.000000] zynq_clock_init: clkc starts at f0004100
    [ 0.000000] Zynq clock init
    [ 0.000014] sched_clock: 64 bits at 333MHz, resolution 3ns, wraps every 3298534883328ns
    [ 0.000290] ps7-ttc #0 at f0006000, irq=43
    [ 0.000590] Console: colour dummy device 80x30
    [ 0.000624] Calibrating delay loop... 1325.46 BogoMIPS (lpj=6627328)
    [ 0.040196] pid_max: default: 32768 minimum: 301
    [ 0.040407] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes)
    [ 0.040428] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes)
    [ 0.042591] CPU: Testing write buffer coherency: ok
    [ 0.042919] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
    [ 0.042977] Setting up static identity map for 0x4cb118 - 0x4cb170
    [ 0.043198] L310 cache controller enabled
    [ 0.043218] l2x0: 8 ways, CACHE_ID 0x410000c8, AUX_CTRL 0x72760000, Cache size: 512 kB
    [ 0.120987] CPU1: Booted secondary processor
    [ 0.210218] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
    [ 0.210344] Brought up 2 CPUs
    [ 0.210363] SMP: Total of 2 processors activated.
    [ 0.210372] CPU: All CPU(s) started in SVC mode.
    [ 0.211031] devtmpfs: initialized
    [ 0.213454] VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 4
    [ 0.214643] regulator-dummy: no parameters
    [ 0.221502] NET: Registered protocol family 16
    [ 0.223764] DMA: preallocated 256 KiB pool for atomic coherent allocations
    [ 0.226020] cpuidle: using governor ladder
    [ 0.226033] cpuidle: using governor menu
    [ 0.233382] syscon f8000000.ps7-slcr: regmap [mem 0xf8000000-0xf8000fff] registered
    [ 0.234888] hw-breakpoint: found 5 (+1 reserved) breakpoint and 1 watchpoint registers.
    [ 0.234902] hw-breakpoint: maximum watchpoint size is 4 bytes.
    [ 0.235012] zynq-ocm f800c000.ps7-ocmc: ZYNQ OCM pool: 256 KiB @ 0xf0080000
    [ 0.256601] bio: create slab <bio-0> at 0
    [ 0.258011] vgaarb: loaded
    [ 0.258703] SCSI subsystem initialized
    [ 0.259579] usbcore: registered new interface driver usbfs
    [ 0.259749] usbcore: registered new interface driver hub
    [ 0.259978] usbcore: registered new device driver usb
    [ 0.260604] media: Linux media interface: v0.10
    [ 0.260762] Linux video capture interface: v2.00
    [ 0.260997] pps_core: LinuxPPS API ver. 1 registered
    [ 0.261009] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
    [ 0.261272] PTP clock support registered
    [ 0.261638] EDAC MC: Ver: 3.0.0
    [ 0.262815] Advanced Linux Sound Architecture Driver Initialized.
    [ 0.265529] DMA-API: preallocated 4096 debug entries
    [ 0.265542] DMA-API: debugging enabled by kernel config
    [ 0.265612] Switched to clocksource arm_global_timer
    [ 0.286410] NET: Registered protocol family 2
    [ 0.287048] TCP established hash table entries: 8192 (order: 3, 32768 bytes)
    [ 0.287143] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
    [ 0.287302] TCP: Hash tables configured (established 8192 bind 8192)
    [ 0.287357] TCP: reno registered
    [ 0.287375] UDP hash table entries: 512 (order: 2, 16384 bytes)
    [ 0.287425] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
    [ 0.287690] NET: Registered protocol family 1
    [ 0.288023] RPC: Registered named UNIX socket transport module.
    [ 0.288037] RPC: Registered udp transport module.
    [ 0.288045] RPC: Registered tcp transport module.
    [ 0.288053] RPC: Registered tcp NFSv4.1 backchannel transport module.
    [ 0.288065] PCI: CLS 0 bytes, default 64
    [ 0.288487] hw perfevents: enabled with ARMv7 Cortex-A9 PMU driver, 7 counters available
    [ 0.290473] futex hash table entries: 512 (order: 3, 32768 bytes)
    [ 0.291841] bounce pool size: 64 pages
    [ 0.292745] jffs2: version 2.2. (NAND) © 2001-2006 Red Hat, Inc.
    [ 0.292941] msgmni has been set to 1486
    [ 0.293701] io scheduler noop registered
    [ 0.293714] io scheduler deadline registered
    [ 0.293752] io scheduler cfq registered (default)
    [ 0.301706] dma-pl330 f8003000.ps7-dma: Loaded driver for PL330 DMAC-2364208
    [ 0.301726] dma-pl330 f8003000.ps7-dma: DBUFF-128x8bytes Num_Chans-8 Num_Peri-4 Num_Events-16
    [ 0.423476] e0001000.serial: ttyPS0 at MMIO 0xe0001000 (irq = 82, base_baud = 3124999) is a xuartps
    [ 0.995913] console [ttyPS0] enabled
    [ 1.000174] xdevcfg f8007000.ps7-dev-cfg: ioremap 0xf8007000 to f0068000
    [ 1.007791] [drm] Initialized drm 1.1.0 20060810
    [ 1.024844] brd: module loaded
    [ 1.034199] loop: module loaded
    [ 1.043579] e1000e: Intel(R) PRO/1000 Network Driver - 2.3.2-k
    [ 1.049566] e1000e: Copyright(c) 1999 - 2013 Intel Corporation.
    [ 1.057324] libphy: XEMACPS mii bus: probed
    [ 1.061690] ------------- phy_id = 0x3625e62
    [ 1.066710] xemacps e000b000.ps7-ethernet: pdev->id -1, baseaddr 0xe000b000, irq 54
    [ 1.075253] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
    [ 1.081968] ehci-pci: EHCI PCI platform driver
    [ 1.089235] zynq-dr e0002000.ps7-usb: Unable to init USB phy, missing?
    [ 1.096106] usbcore: registered new interface driver usb-storage
    [ 1.102948] mousedev: PS/2 mouse device common for all mice
    [ 1.109075] i2c /dev entries driver
    [ 1.115994] zynq-edac f8006000.ps7-ddrc: ecc not enabled
    [ 1.121483] cpufreq_cpu0: failed to get cpu0 regulator: -19
    [ 1.127409] Xilinx Zynq CpuIdle Driver started
    [ 1.132251] sdhci: Secure Digital Host Controller Interface driver
    [ 1.138410] sdhci: Copyright(c) Pierre Ossman
    [ 1.142682] sdhci-pltfm: SDHCI platform and OF driver helper
    [ 1.149500] mmc0: no vqmmc regulator found
    [ 1.153510] mmc0: no vmmc regulator found
    [ 1.195633] mmc0: SDHCI controller on e0100000.ps7-sdio [e0100000.ps7-sdio] using ADMA
    [ 1.204324] usbcore: registered new interface driver usbhid
    [ 1.209837] usbhid: USB HID core driver
    [ 1.214536] nand: device found, Manufacturer ID: 0x2c, Chip ID: 0xda
    [ 1.220825] nand: Micron MT29F2G08ABAEAWP
    [ 1.224798] nand: 256MiB, SLC, page size: 2048, OOB size: 64
    [ 1.230744] Bad block table found at page 131008, version 0x01
    [ 1.236961] Bad block table found at page 130944, version 0x01
    [ 1.243008] 3 ofpart partitions found on MTD device pl353-nand
    [ 1.248781] Creating 3 MTD partitions on "pl353-nand":
    [ 1.253880] 0x000000000000-0x000002000000 : "BOOT.bin-env-dts-kernel"
    [ 1.261937] 0x000002000000-0x00000b000000 : "angstram-rootfs"
    [ 1.269238] 0x00000b000000-0x000010000000 : "upgrade-rootfs"
    [ 1.279964] TCP: cubic registered
    [ 1.283198] NET: Registered protocol family 17
    [ 1.287892] Registering SWP/SWPB emulation handler
    [ 1.293759] regulator-dummy: disabling
    [ 1.298082] UBI: attaching mtd1 to ubi0
    [ 1.826022] UBI: scanning is finished
    [ 1.837648] UBI: attached mtd1 (name "angstram-rootfs", size 144 MiB) to ubi0
    [ 1.844698] UBI: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes
    [ 1.851493] UBI: min./max. I/O unit sizes: 2048/2048, sub-page size 2048
    [ 1.858170] UBI: VID header offset: 2048 (aligned 2048), data offset: 4096
    [ 1.865008] UBI: good PEBs: 1152, bad PEBs: 0, corrupted PEBs: 0
    [ 1.871019] UBI: user volume: 1, internal volumes: 1, max. volumes count: 128
    [ 1.878128] UBI: max/mean erase counter: 2/0, WL threshold: 4096, image sequence number: 1113221046
    [ 1.887159] UBI: available PEBs: 0, total reserved PEBs: 1152, PEBs reserved for bad PEB handling: 40
    [ 1.896375] UBI: background thread "ubi_bgt0d" started, PID 1084
    [ 1.896381] drivers/rtc/hctosys.c: unable to open rtc device (rtc0)
    [ 1.900268] ALSA device list:
    [ 1.900271] No soundcards found.
    [ 1.916663] UBIFS: background thread "ubifs_bgt0_0" started, PID 1086
    [ 1.945676] UBIFS: recovery needed
    [ 2.031798] UBIFS: recovery completed
    [ 2.035467] UBIFS: mounted UBI device 0, volume 0, name "rootfs"
    [ 2.041415] UBIFS: LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
    [ 2.050528] UBIFS: FS size: 128626688 bytes (122 MiB, 1013 LEBs), journal size 9023488 bytes (8 MiB, 72 LEBs)
    [ 2.060412] UBIFS: reserved for root: 0 bytes (0 KiB)
    [ 2.065441] UBIFS: media format: w4/r0 (latest is w4/r0), UUID E8A4479F-B15D-4C7A-964D-0F246E2BB6ED, small LPT model
    [ 2.076726] VFS: Mounted root (ubifs filesystem) on device 0:11.
    [ 2.083898] devtmpfs: mounted
    [ 2.087021] Freeing unused kernel memory: 204K (c06db000 - c070e000)
    [ 2.919278] random: dd urandom read with 1 bits of entropy available
    [ 3.305656]
    [ 3.305656] bcm54xx_config_init
    [ 4.415662]
    [ 4.415662] bcm54xx_config_init
    [ 7.416501] xemacps e000b000.ps7-ethernet: Set clk to 24999999 Hz
    [ 7.422592] xemacps e000b000.ps7-ethernet: link up (100/FULL)
    [ 20.256360] In axi fpga driver!
    [ 20.259426] request_mem_region OK!
    [ 20.262821] AXI fpga dev virtual address is 0xf0200000
    [ 20.267954] *base_vir_addr = 0xc51e
    [ 20.282354] In fpga mem driver!
    [ 20.285797] request_mem_region OK!
    [ 20.289304] fpga mem virtual address is 0xf3000000
    [ 21.084899]
    [ 21.084899] bcm54xx_config_init
    [ 22.164783]
    [ 22.164783] bcm54xx_config_init
    [ 25.165253] xemacps e000b000.ps7-ethernet: Set clk to 24999999 Hz
    [ 25.171273] xemacps e000b000.ps7-ethernet: link up (100/FULL)
    [ 221.269784] random: nonblocking pool is initialized
    main.c:13992: log_level = 4
    main.c:14019: This is XILINX board. Totalram: 1039753216
    main.c:14025: Detect 1GB control board of XILINX
    driver-bitmain.c:1776: mmap axi_fpga_addr = 0xb6fbc000
    driver-bitmain.c:1781: axi_fpga_addr data = 0xc51e
    driver-bitmain.c:1797: mmap fpga_mem_addr = 0xb5db5000
    driver-bitmain.c:994: forceFreq=-1 forceFlag=0
    driver-bitmain.c:1696: min work minertest[0]:912


    main.c:8570: DETECT HW version=0000c51e
    main.c:14064: miner ID : 811c34c61035885c
    main.c:14089: Miner Type = S9
    main.c:14101: AsicType = 1387
    main.c:14104: real AsicNum = 63
    main.c:14197: use critical mode to search freq...
    driver-bitmain.c:1876: get PLUG ON=0x000000e0
    driver-bitmain.c:1946: Find hashboard on Chain[5]
    driver-bitmain.c:1946: Find hashboard on Chain[6]
    driver-bitmain.c:1946: Find hashboard on Chain[7]
    main.c:2282: Check chain[5] PIC fw version=0x03
    main.c:2282: Check chain[6] PIC fw version=0x03
    main.c:2282: Check chain[7] PIC fw version=0x03
    main.c:8940: read pic freq and badcore num...
    main.c:8961: chain[5]: [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255]
    main.c:9003: has freq in PIC, will disable freq setting.
    main.c:9099: chain[5] has freq in PIC and will jump over...
    main.c:9103: Chain[5] has core num in PIC
    main.c:9113: Chain[5] ASIC[0] has core num=1
    main.c:9113: Chain[5] ASIC[2] has core num=1
    main.c:9113: Chain[5] ASIC[5] has core num=1
    main.c:9113: Chain[5] ASIC[8] has core num=1
    main.c:9113: Chain[5] ASIC[11] has core num=1
    main.c:9113: Chain[5] ASIC[12] has core num=1
    main.c:9113: Chain[5] ASIC[14] has core num=1
    main.c:9113: Chain[5] ASIC[15] has core num=1
    main.c:9113: Chain[5] ASIC[17] has core num=1
    main.c:9113: Chain[5] ASIC[18] has core num=1
    main.c:9113: Chain[5] ASIC[19] has core num=1
    main.c:9113: Chain[5] ASIC[21] has core num=1
    main.c:9113: Chain[5] ASIC[22] has core num=1
    main.c:9113: Chain[5] ASIC[23] has core num=1
    main.c:9113: Chain[5] ASIC[24] has core num=1
    main.c:9113: Chain[5] ASIC[25] has core num=1
    main.c:9113: Chain[5] ASIC[26] has core num=1
    main.c:9113: Chain[5] ASIC[27] has core num=1
    main.c:9113: Chain[5] ASIC[30] has core num=1
    main.c:9113: Chain[5] ASIC[31] has core num=1
    main.c:9113: Chain[5] ASIC[32] has core num=1
    main.c:9113: Chain[5] ASIC[33] has core num=1
    main.c:9113: Chain[5] ASIC[34] has core num=1
    main.c:9113: Chain[5] ASIC[35] has core num=1
    main.c:9113: Chain[5] ASIC[36] has core num=1
    main.c:9113: Chain[5] ASIC[37] has core num=1
    main.c:9113: Chain[5] ASIC[38] has core num=1
    main.c:9113: Chain[5] ASIC[41] has core num=1
    main.c:9113: Chain[5] ASIC[43] has core num=1
    main.c:9113: Chain[5] ASIC[44] has core num=1
    main.c:9113: Chain[5] ASIC[45] has core num=1
    main.c:9113: Chain[5] ASIC[46] has core num=1
    main.c:9113: Chain[5] ASIC[47] has core num=1
    main.c:9113: Chain[5] ASIC[48] has core num=2
    main.c:9113: Chain[5] ASIC[49] has core num=1
    main.c:9113: Chain[5] ASIC[50] has core num=1
    main.c:9113: Chain[5] ASIC[51] has core num=1
    main.c:9113: Chain[5] ASIC[53] has core num=1
    main.c:9113: Chain[5] ASIC[56] has core num=1
    main.c:9113: Chain[5] ASIC[57] has core num=1
    main.c:9113: Chain[5] ASIC[58] has core num=1
    main.c:9113: Chain[5] ASIC[59] has core num=1
    main.c:9113: Chain[5] ASIC[60] has core num=1
    main.c:9113: Chain[5] ASIC[61] has core num=1
    main.c:9113: Chain[5] ASIC[62] has core num=2
    main.c:2282: Check chain[5] PIC fw version=0x03
    main.c:8940: read pic freq and badcore num...
    main.c:8961: chain[6]: [63:22] [63:5] [63:24] [63:24] [63:54] [63:18] [63:255] [63:255]
    main.c:9003: has freq in PIC, will disable freq setting.
    main.c:9099: chain[6] has freq in PIC and will jump over...
    main.c:9103: Chain[6] has core num in PIC
    main.c:9113: Chain[6] ASIC[14] has core num=1
    main.c:9113: Chain[6] ASIC[36] has core num=1
    main.c:9113: Chain[6] ASIC[38] has core num=1
    main.c:9113: Chain[6] ASIC[42] has core num=13
    main.c:9113: Chain[6] ASIC[43] has core num=4
    main.c:9113: Chain[6] ASIC[47] has core num=1
    main.c:9113: Chain[6] ASIC[51] has core num=1
    main.c:9113: Chain[6] ASIC[62] has core num=1
    main.c:2282: Check chain[6] PIC fw version=0x03
    main.c:8940: read pic freq and badcore num...
    main.c:8961: chain[7]: [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255]
    main.c:9003: has freq in PIC, will disable freq setting.
    main.c:9099: chain[7] has freq in PIC and will jump over...
    main.c:9103: Chain[7] has core num in PIC
    main.c:9113: Chain[7] ASIC[0] has core num=1
    main.c:9113: Chain[7] ASIC[1] has core num=1
    main.c:9113: Chain[7] ASIC[2] has core num=2
    main.c:9113: Chain[7] ASIC[3] has core num=2
    main.c:9113: Chain[7] ASIC[4] has core num=3
    main.c:9113: Chain[7] ASIC[5] has core num=1
    main.c:9113: Chain[7] ASIC[6] has core num=2
    main.c:9113: Chain[7] ASIC[8] has core num=1
    main.c:9113: Chain[7] ASIC[11] has core num=2
    main.c:9113: Chain[7] ASIC[12] has core num=1
    main.c:9113: Chain[7] ASIC[13] has core num=1
    main.c:9113: Chain[7] ASIC[14] has core num=1
    main.c:9113: Chain[7] ASIC[15] has core num=2
    main.c:9113: Chain[7] ASIC[16] has core num=1
    main.c:9113: Chain[7] ASIC[17] has core num=1
    main.c:9113: Chain[7] ASIC[18] has core num=1
    main.c:9113: Chain[7] ASIC[19] has core num=2
    main.c:9113: Chain[7] ASIC[20] has core num=1
    main.c:9113: Chain[7] ASIC[21] has core num=1
    main.c:9113: Chain[7] ASIC[22] has core num=1
    main.c:9113: Chain[7] ASIC[24] has core num=2
    main.c:9113: Chain[7] ASIC[25] has core num=2
    main.c:9113: Chain[7] ASIC[26] has core num=1
    main.c:9113: Chain[7] ASIC[27] has core num=1
    main.c:9113: Chain[7] ASIC[28] has core num=1
    main.c:9113: Chain[7] ASIC[29] has core num=1
    main.c:9113: Chain[7] ASIC[30] has core num=1
    main.c:9113: Chain[7] ASIC[31] has core num=1
    main.c:9113: Chain[7] ASIC[32] has core num=1
    main.c:9113: Chain[7] ASIC[33] has core num=1
    main.c:9113: Chain[7] ASIC[34] has core num=1
    main.c:9113: Chain[7] ASIC[35] has core num=1
    main.c:9113: Chain[7] ASIC[36] has core num=1
    main.c:9113: Chain[7] ASIC[37] has core num=1
    main.c:9113: Chain[7] ASIC[38] has core num=1
    main.c:9113: Chain[7] ASIC[39] has core num=1
    main.c:9113: Chain[7] ASIC[40] has core num=1
    main.c:9113: Chain[7] ASIC[41] has core num=1
    main.c:9113: Chain[7] ASIC[42] has core num=1
    main.c:9113: Chain[7] ASIC[43] has core num=1
    main.c:9113: Chain[7] ASIC[44] has core num=1
    main.c:9113: Chain[7] ASIC[45] has core num=1
    main.c:9113: Chain[7] ASIC[46] has core num=1
    main.c:9113: Chain[7] ASIC[47] has core num=1
    main.c:9113: Chain[7] ASIC[48] has core num=1
    main.c:9113: Chain[7] ASIC[50] has core num=1
    main.c:9113: Chain[7] ASIC[51] has core num=1
    main.c:9113: Chain[7] ASIC[52] has core num=1
    main.c:9113: Chain[7] ASIC[53] has core num=1
    main.c:9113: Chain[7] ASIC[54] has core num=1
    main.c:9113: Chain[7] ASIC[55] has core num=1
    main.c:9113: Chain[7] ASIC[56] has core num=2
    main.c:9113: Chain[7] ASIC[58] has core num=1
    main.c:9113: Chain[7] ASIC[59] has core num=1
    main.c:9113: Chain[7] ASIC[60] has core num=1
    main.c:9113: Chain[7] ASIC[61] has core num=1
    main.c:9113: Chain[7] ASIC[62] has core num=1
    main.c:2282: Check chain[7] PIC fw version=0x03
    main.c:9183: get PIC voltage=91 on chain[5], value=890
    main.c:9183: get PIC voltage=74 on chain[6], value=900
    main.c:9183: get PIC voltage=6 on chain[7], value=940
    main.c:9349: chain[5] temp offset record: 62,0,0,0,0,0,35,28
    main.c:9366: chain[5] temp chip I2C addr=0x98
    main.c:9372: chain[5] has no middle temp, use special fix mode.
    main.c:9349: chain[6] temp offset record: 62,-3,0,0,0,0,0,0
    main.c:9366: chain[6] temp chip I2C addr=0x98
    main.c:9349: chain[7] temp offset record: 62,0,0,0,0,0,35,28
    main.c:9366: chain[7] temp chip I2C addr=0x98
    main.c:9372: chain[7] has no middle temp, use special fix mode.
    main.c:13956: total_exist_chain_num = 3
    main.c:9562: CRC error counter=0
    main.c:9577: set command mode to VIL
    main.c:9649:
    --- check asic number
    main.c:9745: After Get ASIC NUM CRC error counter=0
    main.c:9768: set_baud=0
    main.c:10693: The min freq=700
    main.c:10695: set real timeout 52, need sleep=379392
    main.c:12825: After TEST CRC error counter=0
    main.c:14236: search freq for 1 times, completed chain = 3, total chain num = 3
    board_frq_tuning.c:628: single_board_frq_tuning enter
    board_frq_tuning.c:629: min_rate, des_rate, fix_volt:13800, 14000, 880
    board_frq_tuning.c:254: force_freq not set, don't need tuning
    main.c:14645: restart Miner chance num=2
    main.c:14685: waiting for receive_func to exit!
    main.c:14699: waiting for pic heart to exit!
    main.c:13927: bmminer not found=17489 root 0:00 grep bmminer

    main.c:14758: bmminer not found, restart bmminer ...
    driver-btm-c5.c:12243:bitmain_c5_init: This is user mode for mining
    driver-btm-c5.c:12286:bitmain_c5_init: Detect 1GB control board of XILINX
    driver-btm-c5.c:12313:bitmain_c5_init: Miner Type = S9
    driver-btm-c5.c:12324:bitmain_c5_init: Miner compile time: Wed Jul 31 16:18:27 CST 2019 type: Antminer S9
    driver-btm-c5.c:12414:bitmain_c5_init: miner ID : 811c34c61035885c
    driver-btm-c5.c:12571:bitmain_c5_init: Checking fans...
    driver-btm-c5.c:3006:check_fan_beforeInit: get fan[4] speed=6480
    driver-btm-c5.c:3006:check_fan_beforeInit: get fan[4] speed=6480
    driver-btm-c5.c:3006:check_fan_beforeInit: get fan[5] speed=6600
    driver-btm-c5.c:3006:check_fan_beforeInit: get fan[4] speed=6480
    driver-btm-c5.c:3006:check_fan_beforeInit: get fan[5] speed=6600
    driver-btm-c5.c:3006:check_fan_beforeInit: get fan[4] speed=6480
    driver-btm-c5.c:3006:check_fan_beforeInit: get fan[5] speed=6600
    driver-btm-c5.c:13108:bitmain_c5_init: chain[5]: [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255]
    driver-btm-c5.c:13122:bitmain_c5_init: last_freq: 0x00 0x7d 0x00 0x47 0x00 0x47 0x04 0x47 0x07 0x47 0x00 0x47 0x03 0x47 0x03 0x47 0x03 0x47 0x03 0x47 0x03 0x47 0x03 0x47 0x01 0x47 0x01 0x47 0x0f 0x47 0x0f 0x47 0x0f 0x47 0x0f 0x47 0x05 0x47 0x09 0x47 0x23 0x47 0x00 0x47 0x00 0x47 0x00 0x47 0x00 0x47 0x00 0x47 0x00 0x47 0x00 0x47 0x00 0x47 0x00 0x47 0x00 0x47 0x00 0x47 0x00 0x47 0x00 0x47 0x00 0x47 0x00 0x47 0x00 0x47 0x00 0x47 0x00 0x47 0x00 0x47 0x00 0x47 0x00 0x47 0x00 0x47 0x00 0x47 0x00 0x47 0x00 0x47 0x00 0x47 0x00 0x47 0x00 0x47 0x00 0x47 0x00 0x47 0x00 0x47 0x00 0x47 0x00 0x47 0x00 0x47 0x00 0x47 0x00 0x47 0x00 0x47 0x00 0x47 0x00 0x47 0x00 0x47 0x00 0x47 0x00 0x47 0x00 0x47
    driver-btm-c5.c:13149:bitmain_c5_init: Detect: use voltage limit rules on single board!
    driver-btm-c5.c:13155:bitmain_c5_init: Detect: S9_63 use voltage level=1 : 1
    driver-btm-c5.c:13171:bitmain_c5_init: Chain[J6] has backup chain_voltage=890
    driver-btm-c5.c:13188:bitmain_c5_init: No scan based on domain
    driver-btm-c5.c:1899:jump_to_app_CheckAndRestorePIC: Check chain[5] PIC fw version=0x03
    driver-btm-c5.c:13108:bitmain_c5_init: chain[6]: [63:22] [63:5] [63:24] [63:24] [63:54] [63:18] [63:255] [63:255]
    driver-btm-c5.c:13122:bitmain_c5_init: last_freq: 0x00 0x7d 0x0f 0x30 0x0d 0x49 0x03 0x49 0x00 0x31 0x01 0x49 0x00 0x49 0x04 0x31 0x03 0x49 0x00 0x49 0x04 0x3a 0x0f 0x49 0x0f 0x49 0x05 0x45 0x04 0x49 0x0c 0x3d 0x01 0x45 0x06 0x39 0x05 0x49 0x0a 0x45 0x23 0x45 0x03 0x49 0x0b 0x45 0x23 0x41 0x00 0x49 0x00 0x48 0x00 0x49 0x00 0x49 0x00 0x48 0x00 0x49 0x00 0x3a 0x00 0x48 0x00 0x49 0x00 0x42 0x00 0x48 0x00 0x45 0x00 0x46 0x00 0x48 0x00 0x49 0x00 0x46 0x00 0x48 0x00 0x44 0x00 0x44 0x00 0x30 0x00 0x42 0x00 0x49 0x00 0x44 0x00 0x49 0x00 0x49 0x00 0x48 0x00 0x3f 0x00 0x48 0x00 0x42 0x00 0x42 0x00 0x49 0x00 0x49 0x00 0x46 0x00 0x41 0x00 0x49 0x00 0x49 0x00 0x44 0x00 0x49 0x00 0x49 0x00 0x49
    driver-btm-c5.c:13171:bitmain_c5_init: Chain[J7] has backup chain_voltage=900
    driver-btm-c5.c:13178:bitmain_c5_init: Chain[J7] test patten OK temp=59
    driver-btm-c5.c:13193:bitmain_c5_init: scan based on domain
    driver-btm-c5.c:1899:jump_to_app_CheckAndRestorePIC: Check chain[6] PIC fw version=0x03
    driver-btm-c5.c:13108:bitmain_c5_init: chain[7]: [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255]
    driver-btm-c5.c:13122:bitmain_c5_init: last_freq: 0x00 0x7d 0x00 0x48 0x00 0x48 0x04 0x48 0x08 0x48 0x00 0x48 0x03 0x48 0x03 0x48 0x03 0x48 0x03 0x48 0x03 0x48 0x03 0x48 0x01 0x48 0x01 0x48 0x0f 0x48 0x0f 0x48 0x0f 0x48 0x0f 0x48 0x05 0x48 0x09 0x48 0x23 0x48 0x00 0x48 0x00 0x48 0x00 0x48 0x00 0x48 0x00 0x48 0x00 0x48 0x00 0x48 0x00 0x48 0x00 0x48 0x00 0x48 0x00 0x48 0x00 0x48 0x00 0x48 0x00 0x48 0x00 0x48 0x00 0x48 0x00 0x48 0x00 0x48 0x00 0x48 0x00 0x48 0x00 0x48 0x00 0x48 0x00 0x48 0x00 0x48 0x00 0x48 0x00 0x48 0x00 0x48 0x00 0x48 0x00 0x48 0x00 0x48 0x00 0x48 0x00 0x48 0x00 0x48 0x00 0x48 0x00 0x48 0x00 0x48 0x00 0x48 0x00 0x48 0x00 0x48 0x00 0x48 0x00 0x48 0x00 0x48 0x00 0x48
    driver-btm-c5.c:13149:bitmain_c5_init: Detect: use voltage limit rules on single board!
    driver-btm-c5.c:13155:bitmain_c5_init: Detect: S9_63 use voltage level=1 : 1
    driver-btm-c5.c:13171:bitmain_c5_init: Chain[J8] has backup chain_voltage=890
    driver-btm-c5.c:13188:bitmain_c5_init: No scan based on domain
    driver-btm-c5.c:1899:jump_to_app_CheckAndRestorePIC: Check chain[7] PIC fw version=0x03
    driver-btm-c5.c:12195:init_exist_chain_table: total_exist_chain_num = 3
    driver-btm-c5.c:13303:bitmain_c5_init: Chain[J6] orignal chain_voltage_pic=91 value=890
    driver-btm-c5.c:13303:bitmain_c5_init: Chain[J7] orignal chain_voltage_pic=74 value=900
    driver-btm-c5.c:13303:bitmain_c5_init: Chain[J8] orignal chain_voltage_pic=6 value=940
    driver-btm-c5.c:13320:bitmain_c5_init: Chain[J8] will use backup chain_voltage_pic=890 [91]
    driver-btm-c5.c:13330:bitmain_c5_init: Chain[J8] get working chain_voltage_pic=91
    driver-btm-c5.c:13421:bitmain_c5_init: Chain[J6] has 63 asic
    driver-btm-c5.c:13421:bitmain_c5_init: Chain[J7] has 63 asic
    driver-btm-c5.c:13421:bitmain_c5_init: Chain[J8] has 63 asic
    driver-btm-c5.c:4531:set_frequency: Chain[J6] has core num in PIC
    driver-btm-c5.c:4541:set_frequency: Chain[J6] ASIC[0] has core num=1
    driver-btm-c5.c:4541:set_frequency: Chain[J6] ASIC[2] has core num=1
    driver-btm-c5.c:4541:set_frequency: Chain[J6] ASIC[5] has core num=1
    driver-btm-c5.c:4541:set_frequency: Chain[J6] ASIC[8] has core num=1
    driver-btm-c5.c:4541:set_frequency: Chain[J6] ASIC[11] has core num=1
    driver-btm-c5.c:4541:set_frequency: Chain[J6] ASIC[12] has core num=1
    driver-btm-c5.c:4541:set_frequency: Chain[J6] ASIC[14] has core num=1
    driver-btm-c5.c:4541:set_frequency: Chain[J6] ASIC[15] has core num=1
    driver-btm-c5.c:4541:set_frequency: Chain[J6] ASIC[17] has core num=1
    driver-btm-c5.c:4541:set_frequency: Chain[J6] ASIC[18] has core num=1
    driver-btm-c5.c:4541:set_frequency: Chain[J6] ASIC[19] has core num=1
    driver-btm-c5.c:4541:set_frequency: Chain[J6] ASIC[21] has core num=1
    driver-btm-c5.c:4541:set_frequency: Chain[J6] ASIC[22] has core num=1
    driver-btm-c5.c:4541:set_frequency: Chain[J6] ASIC[23] has core num=1
    driver-btm-c5.c:4541:set_frequency: Chain[J6] ASIC[24] has core num=1
    driver-btm-c5.c:4541:set_frequency: Chain[J6] ASIC[25] has core num=1
    driver-btm-c5.c:4541:set_frequency: Chain[J6] ASIC[26] has core num=1
    driver-btm-c5.c:4541:set_frequency: Chain[J6] ASIC[27] has core num=1
    driver-btm-c5.c:4541:set_frequency: Chain[J6] ASIC[30] has core num=1
    driver-btm-c5.c:4541:set_frequency: Chain[J6] ASIC[31] has core num=1
    driver-btm-c5.c:4541:set_frequency: Chain[J6] ASIC[32] has core num=1
    driver-btm-c5.c:4541:set_frequency: Chain[J6] ASIC[33] has core num=1
    driver-btm-c5.c:4541:set_frequency: Chain[J6] ASIC[34] has core num=1
    driver-btm-c5.c:4541:set_frequency: Chain[J6] ASIC[35] has core num=1
    driver-btm-c5.c:4541:set_frequency: Chain[J6] ASIC[36] has core num=1
    driver-btm-c5.c:4541:set_frequency: Chain[J6] ASIC[37] has core num=1
    driver-btm-c5.c:4541:set_frequency: Chain[J6] ASIC[38] has core num=1
    driver-btm-c5.c:4541:set_frequency: Chain[J6] ASIC[41] has core num=1
    driver-btm-c5.c:4541:set_frequency: Chain[J6] ASIC[43] has core num=1
    driver-btm-c5.c:4541:set_frequency: Chain[J6] ASIC[44] has core num=1
    driver-btm-c5.c:4541:set_frequency: Chain[J6] ASIC[45] has core num=1
    driver-btm-c5.c:4541:set_frequency: Chain[J6] ASIC[46] has core num=1
    driver-btm-c5.c:4541:set_frequency: Chain[J6] ASIC[47] has core num=1
    driver-btm-c5.c:4541:set_frequency: Chain[J6] ASIC[48] has core num=2
    driver-btm-c5.c:4541:set_frequency: Chain[J6] ASIC[49] has core num=1
    driver-btm-c5.c:4541:set_frequency: Chain[J6] ASIC[50] has core num=1
    driver-btm-c5.c:4541:set_frequency: Chain[J6] ASIC[51] has core num=1
    driver-btm-c5.c:4541:set_frequency: Chain[J6] ASIC[53] has core num=1
    driver-btm-c5.c:4541:set_frequency: Chain[J6] ASIC[56] has core num=1
    driver-btm-c5.c:4541:set_frequency: Chain[J6] ASIC[57] has core num=1
    driver-btm-c5.c:4541:set_frequency: Chain[J6] ASIC[58] has core num=1
    driver-btm-c5.c:4541:set_frequency: Chain[J6] ASIC[59] has core num=1
    driver-btm-c5.c:4541:set_frequency: Chain[J6] ASIC[60] has core num=1
    driver-btm-c5.c:4541:set_frequency: Chain[J6] ASIC[61] has core num=1
    driver-btm-c5.c:4541:set_frequency: Chain[J6] ASIC[62] has core num=2
    driver-btm-c5.c:4531:set_frequency: Chain[J7] has core num in PIC
    driver-btm-c5.c:4541:set_frequency: Chain[J7] ASIC[14] has core num=1
    driver-btm-c5.c:4541:set_frequency: Chain[J7] ASIC[36] has core num=1
    driver-btm-c5.c:4541:set_frequency: Chain[J7] ASIC[38] has core num=1
    driver-btm-c5.c:4541:set_frequency: Chain[J7] ASIC[42] has core num=13
    driver-btm-c5.c:4541:set_frequency: Chain[J7] ASIC[43] has core num=4
    driver-btm-c5.c:4541:set_frequency: Chain[J7] ASIC[47] has core num=1
    driver-btm-c5.c:4541:set_frequency: Chain[J7] ASIC[51] has core num=1
    driver-btm-c5.c:4541:set_frequency: Chain[J7] ASIC[62] has core num=1
    driver-btm-c5.c:4531:set_frequency: Chain[J8] has core num in PIC
    driver-btm-c5.c:4541:set_frequency: Chain[J8] ASIC[0] has core num=1
    driver-btm-c5.c:4541:set_frequency: Chain[J8] ASIC[1] has core num=1
    driver-btm-c5.c:4541:set_frequency: Chain[J8] ASIC[2] has core num=2
    driver-btm-c5.c:4541:set_frequency: Chain[J8] ASIC[3] has core num=2
    driver-btm-c5.c:4541:set_frequency: Chain[J8] ASIC[4] has core num=3
    driver-btm-c5.c:4541:set_frequency: Chain[J8] ASIC[5] has core num=1
    driver-btm-c5.c:4541:set_frequency: Chain[J8] ASIC[6] has core num=2
    driver-btm-c5.c:4541:set_frequency: Chain[J8] ASIC[8] has core num=1
    driver-btm-c5.c:4541:set_frequency: Chain[J8] ASIC[11] has core num=2
    driver-btm-c5.c:4541:set_frequency: Chain[J8] ASIC[12] has core num=1
    driver-btm-c5.c:4541:set_frequency: Chain[J8] ASIC[13] has core num=1
    driver-btm-c5.c:4541:set_frequency: Chain[J8] ASIC[14] has core num=1
    driver-btm-c5.c:4541:set_frequency: Chain[J8] ASIC[15] has core num=2
    driver-btm-c5.c:4541:set_frequency: Chain[J8] ASIC[16] has core num=1
    driver-btm-c5.c:4541:set_frequency: Chain[J8] ASIC[17] has core num=1
    driver-btm-c5.c:4541:set_frequency: Chain[J8] ASIC[18] has core num=1
    driver-btm-c5.c:4541:set_frequency: Chain[J8] ASIC[19] has core num=2
    driver-btm-c5.c:4541:set_frequency: Chain[J8] ASIC[20] has core num=1
    driver-btm-c5.c:4541:set_frequency: Chain[J8] ASIC[21] has core num=1
    driver-btm-c5.c:4541:set_frequency: Chain[J8] ASIC[22] has core num=1
    driver-btm-c5.c:4541:set_frequency: Chain[J8] ASIC[24] has core num=2
    driver-btm-c5.c:4541:set_frequency: Chain[J8] ASIC[25] has core num=2
    driver-btm-c5.c:4541:set_frequency: Chain[J8] ASIC[26] has core num=1
    driver-btm-c5.c:4541:set_frequency: Chain[J8] ASIC[27] has core num=1
    driver-btm-c5.c:4541:set_frequency: Chain[J8] ASIC[28] has core num=1
    driver-btm-c5.c:4541:set_frequency: Chain[J8] ASIC[29] has core num=1
    driver-btm-c5.c:4541:set_frequency: Chain[J8] ASIC[30] has core num=1
    driver-btm-c5.c:4541:set_frequency: Chain[J8] ASIC[31] has core num=1
    driver-btm-c5.c:4541:set_frequency: Chain[J8] ASIC[32] has core num=1
    driver-btm-c5.c:4541:set_frequency: Chain[J8] ASIC[33] has core num=1
    driver-btm-c5.c:4541:set_frequency: Chain[J8] ASIC[34] has core num=1
    driver-btm-c5.c:4541:set_frequency: Chain[J8] ASIC[35] has core num=1
    driver-btm-c5.c:4541:set_frequency: Chain[J8] ASIC[36] has core num=1
    driver-btm-c5.c:4541:set_frequency: Chain[J8] ASIC[37] has core num=1
    driver-btm-c5.c:4541:set_frequency: Chain[J8] ASIC[38] has core num=1
    driver-btm-c5.c:4541:set_frequency: Chain[J8] ASIC[39] has core num=1
    driver-btm-c5.c:4541:set_frequency: Chain[J8] ASIC[40] has core num=1
    driver-btm-c5.c:4541:set_frequency: Chain[J8] ASIC[41] has core num=1
    driver-btm-c5.c:4541:set_frequency: Chain[J8] ASIC[42] has core num=1
    driver-btm-c5.c:4541:set_frequency: Chain[J8] ASIC[43] has core num=1
    driver-btm-c5.c:4541:set_frequency: Chain[J8] ASIC[44] has core num=1
    driver-btm-c5.c:4541:set_frequency: Chain[J8] ASIC[45] has core num=1
    driver-btm-c5.c:4541:set_frequency: Chain[J8] ASIC[46] has core num=1
    driver-btm-c5.c:4541:set_frequency: Chain[J8] ASIC[47] has core num=1
    driver-btm-c5.c:4541:set_frequency: Chain[J8] ASIC[48] has core num=1
    driver-btm-c5.c:4541:set_frequency: Chain[J8] ASIC[50] has core num=1
    driver-btm-c5.c:4541:set_frequency: Chain[J8] ASIC[51] has core num=1
    driver-btm-c5.c:4541:set_frequency: Chain[J8] ASIC[52] has core num=1
    driver-btm-c5.c:4541:set_frequency: Chain[J8] ASIC[53] has core num=1
    driver-btm-c5.c:4541:set_frequency: Chain[J8] ASIC[54] has core num=1
    driver-btm-c5.c:4541:set_frequency: Chain[J8] ASIC[55] has core num=1
    driver-btm-c5.c:4541:set_frequency: Chain[J8] ASIC[56] has core num=2
    driver-btm-c5.c:4541:set_frequency: Chain[J8] ASIC[58] has core num=1
    driver-btm-c5.c:4541:set_frequency: Chain[J8] ASIC[59] has core num=1
    driver-btm-c5.c:4541:set_frequency: Chain[J8] ASIC[60] has core num=1
    driver-btm-c5.c:4541:set_frequency: Chain[J8] ASIC[61] has core num=1
    driver-btm-c5.c:4541:set_frequency: Chain[J8] ASIC[62] has core num=1
    driver-btm-c5.c:4571:set_frequency: miner total rate=13458GH/s ideal_total_hash_rate = 13000GH/s
    driver-btm-c5.c:4596:set_frequency: read PIC voltage=940 on chain[5]
    driver-btm-c5.c:4598:set_frequency: Chain:5 chipnum=63
    driver-btm-c5.c:4618:set_frequency: Chain[J6] voltage added=0.0V
    driver-btm-c5.c:4768:set_frequency: Chain:5 temp offset=0
    driver-btm-c5.c:4773:set_frequency: Chain:5 base freq=631
    Asic[ 0]:631 Asic[ 1]:631 Asic[ 2]:631 Asic[ 3]:631 Asic[ 4]:631 Asic[ 5]:631 Asic[ 6]:631 Asic[ 7]:631
    Asic[ 8]:631 Asic[ 9]:631 Asic[10]:631 Asic[11]:631 Asic[12]:631 Asic[13]:631 Asic[14]:631 Asic[15]:631
    Asic[16]:631 Asic[17]:631 Asic[18]:631 Asic[19]:631 Asic[20]:631 Asic[21]:631 Asic[22]:631 Asic[23]:631
    Asic[24]:631 Asic[25]:631 Asic[26]:631 Asic[27]:631 Asic[28]:631 Asic[29]:631 Asic[30]:631 Asic[31]:631
    Asic[32]:631 Asic[33]:631 Asic[34]:631 Asic[35]:631 Asic[36]:631 Asic[37]:631 Asic[38]:631 Asic[39]:631
    Asic[40]:631 Asic[41]:631 Asic[42]:631 Asic[43]:631 Asic[44]:631 Asic[45]:631 Asic[46]:631 Asic[47]:631
    Asic[48]:631 Asic[49]:631 Asic[50]:631 Asic[51]:631 Asic[52]:631 Asic[53]:631 Asic[54]:631 Asic[55]:631
    Asic[56]:631 Asic[57]:631 Asic[58]:631 Asic[59]:631 Asic[60]:631 Asic[61]:631 Asic[62]:631
    driver-btm-c5.c:4809:set_frequency: Chain:5 max freq=631
    driver-btm-c5.c:4810:set_frequency: Chain:5 min freq=631

    driver-btm-c5.c:4596:set_frequency: read PIC voltage=940 on chain[6]
    driver-btm-c5.c:4598:set_frequency: Chain:6 chipnum=63
    driver-btm-c5.c:4618:set_frequency: Chain[J7] voltage added=0.1V
    driver-btm-c5.c:4768:set_frequency: Chain:6 temp offset=-3
    driver-btm-c5.c:4773:set_frequency: Chain:6 base freq=512
    Asic[ 0]:512 Asic[ 1]:643 Asic[ 2]:643 Asic[ 3]:516 Asic[ 4]:643 Asic[ 5]:643 Asic[ 6]:516 Asic[ 7]:643
    Asic[ 8]:643 Asic[ 9]:550 Asic[10]:643 Asic[11]:643 Asic[12]:618 Asic[13]:643 Asic[14]:568 Asic[15]:618
    Asic[16]:543 Asic[17]:643 Asic[18]:618 Asic[19]:618 Asic[20]:643 Asic[21]:618 Asic[22]:593 Asic[23]:643
    Asic[24]:637 Asic[25]:643 Asic[26]:643 Asic[27]:637 Asic[28]:643 Asic[29]:550 Asic[30]:637 Asic[31]:643
    Asic[32]:600 Asic[33]:637 Asic[34]:618 Asic[35]:625 Asic[36]:637 Asic[37]:643 Asic[38]:625 Asic[39]:637
    Asic[40]:612 Asic[41]:612 Asic[42]:512 Asic[43]:600 Asic[44]:643 Asic[45]:612 Asic[46]:643 Asic[47]:643
    Asic[48]:637 Asic[49]:581 Asic[50]:637 Asic[51]:600 Asic[52]:600 Asic[53]:643 Asic[54]:643 Asic[55]:625
    Asic[56]:593 Asic[57]:643 Asic[58]:643 Asic[59]:612 Asic[60]:643 Asic[61]:643 Asic[62]:643
    driver-btm-c5.c:4809:set_frequency: Chain:6 max freq=643
    driver-btm-c5.c:4810:set_frequency: Chain:6 min freq=512

    driver-btm-c5.c:4596:set_frequency: read PIC voltage=940 on chain[7]
    driver-btm-c5.c:4598:set_frequency: Chain:7 chipnum=63
    driver-btm-c5.c:4618:set_frequency: Chain[J8] voltage added=0.0V
    driver-btm-c5.c:4768:set_frequency: Chain:7 temp offset=0
    driver-btm-c5.c:4773:set_frequency: Chain:7 base freq=637
    Asic[ 0]:637 Asic[ 1]:637 Asic[ 2]:637 Asic[ 3]:637 Asic[ 4]:637 Asic[ 5]:637 Asic[ 6]:637 Asic[ 7]:637
    Asic[ 8]:637 Asic[ 9]:637 Asic[10]:637 Asic[11]:637 Asic[12]:637 Asic[13]:637 Asic[14]:637 Asic[15]:637
    Asic[16]:637 Asic[17]:637 Asic[18]:637 Asic[19]:637 Asic[20]:637 Asic[21]:637 Asic[22]:637 Asic[23]:637
    Asic[24]:637 Asic[25]:637 Asic[26]:637 Asic[27]:637 Asic[28]:637 Asic[29]:637 Asic[30]:637 Asic[31]:637
    Asic[32]:637 Asic[33]:637 Asic[34]:637 Asic[35]:637 Asic[36]:637 Asic[37]:637 Asic[38]:637 Asic[39]:637
    Asic[40]:637 Asic[41]:637 Asic[42]:637 Asic[43]:637 Asic[44]:637 Asic[45]:637 Asic[46]:637 Asic[47]:637
    Asic[48]:637 Asic[49]:637 Asic[50]:637 Asic[51]:637 Asic[52]:637 Asic[53]:637 Asic[54]:637 Asic[55]:637
    Asic[56]:637 Asic[57]:637 Asic[58]:637 Asic[59]:637 Asic[60]:637 Asic[61]:637 Asic[62]:637
    driver-btm-c5.c:4809:set_frequency: Chain:7 max freq=637
    driver-btm-c5.c:4810:set_frequency: Chain:7 min freq=637


    driver-btm-c5.c:4819:set_frequency: Miner fix freq ...
    driver-btm-c5.c:4263:ProcessFixFreqForChips: totalRate = 13458, fixed_totalRate = 13130
    driver-btm-c5.c:4854:set_frequency: read PIC voltage=940 on chain[5]
    driver-btm-c5.c:4855:set_frequency: Chain:5 chipnum=63
    driver-btm-c5.c:4874:set_frequency: Chain[J6] voltage added=0.0V
    driver-btm-c5.c:5058:set_frequency: Chain:5 temp offset=0
    driver-btm-c5.c:5063:set_frequency: Chain:5 base freq=631
    Asic[ 0]:612 Asic[ 1]:612 Asic[ 2]:612 Asic[ 3]:612 Asic[ 4]:612 Asic[ 5]:612 Asic[ 6]:612 Asic[ 7]:612
    Asic[ 8]:612 Asic[ 9]:612 Asic[10]:612 Asic[11]:612 Asic[12]:612 Asic[13]:612 Asic[14]:612 Asic[15]:612
    Asic[16]:612 Asic[17]:612 Asic[18]:612 Asic[19]:612 Asic[20]:612 Asic[21]:612 Asic[22]:612 Asic[23]:612
    Asic[24]:612 Asic[25]:612 Asic[26]:612 Asic[27]:612 Asic[28]:612 Asic[29]:612 Asic[30]:612 Asic[31]:612
    Asic[32]:612 Asic[33]:612 Asic[34]:612 Asic[35]:612 Asic[36]:612 Asic[37]:612 Asic[38]:612 Asic[39]:612
    Asic[40]:612 Asic[41]:612 Asic[42]:612 Asic[43]:612 Asic[44]:612 Asic[45]:612 Asic[46]:612 Asic[47]:612
    Asic[48]:618 Asic[49]:618 Asic[50]:618 Asic[51]:618 Asic[52]:618 Asic[53]:618 Asic[54]:618 Asic[55]:618
    Asic[56]:618 Asic[57]:618 Asic[58]:618 Asic[59]:618 Asic[60]:618 Asic[61]:618 Asic[62]:618
    driver-btm-c5.c:5110:set_frequency: Chain:5 max freq=618
    driver-btm-c5.c:5111:set_frequency: Chain:5 min freq=612

    driver-btm-c5.c:4854:set_frequency: read PIC voltage=940 on chain[6]
    driver-btm-c5.c:4855:set_frequency: Chain:6 chipnum=63
    driver-btm-c5.c:4874:set_frequency: Chain[J7] voltage added=0.1V
    driver-btm-c5.c:5058:set_frequency: Chain:6 temp offset=-3
    driver-btm-c5.c:5063:set_frequency: Chain:6 base freq=512
    Asic[ 0]:512 Asic[ 1]:625 Asic[ 2]:625 Asic[ 3]:516 Asic[ 4]:625 Asic[ 5]:625 Asic[ 6]:516 Asic[ 7]:625
    Asic[ 8]:625 Asic[ 9]:550 Asic[10]:625 Asic[11]:631 Asic[12]:618 Asic[13]:631 Asic[14]:568 Asic[15]:618
    Asic[16]:543 Asic[17]:631 Asic[18]:618 Asic[19]:618 Asic[20]:631 Asic[21]:618 Asic[22]:593 Asic[23]:631
    Asic[24]:631 Asic[25]:631 Asic[26]:631 Asic[27]:631 Asic[28]:631 Asic[29]:550 Asic[30]:631 Asic[31]:631
    Asic[32]:600 Asic[33]:631 Asic[34]:618 Asic[35]:625 Asic[36]:631 Asic[37]:631 Asic[38]:625 Asic[39]:631
    Asic[40]:612 Asic[41]:612 Asic[42]:512 Asic[43]:600 Asic[44]:631 Asic[45]:612 Asic[46]:631 Asic[47]:631
    Asic[48]:631 Asic[49]:581 Asic[50]:631 Asic[51]:600 Asic[52]:600 Asic[53]:631 Asic[54]:631 Asic[55]:625
    Asic[56]:593 Asic[57]:631 Asic[58]:631 Asic[59]:612 Asic[60]:631 Asic[61]:631 Asic[62]:631
    driver-btm-c5.c:5110:set_frequency: Chain:6 max freq=631
    driver-btm-c5.c:5111:set_frequency: Chain:6 min freq=512

    driver-btm-c5.c:4854:set_frequency: read PIC voltage=940 on chain[7]
    driver-btm-c5.c:4855:set_frequency: Chain:7 chipnum=63
    driver-btm-c5.c:4874:set_frequency: Chain[J8] voltage added=0.0V
    driver-btm-c5.c:5058:set_frequency: Chain:7 temp offset=0
    driver-btm-c5.c:5063:set_frequency: Chain:7 base freq=637
    Asic[ 0]:612 Asic[ 1]:612 Asic[ 2]:612 Asic[ 3]:612 Asic[ 4]:612 Asic[ 5]:612 Asic[ 6]:612 Asic[ 7]:612
    Asic[ 8]:612 Asic[ 9]:612 Asic[10]:612 Asic[11]:612 Asic[12]:612 Asic[13]:612 Asic[14]:612 Asic[15]:612
    Asic[16]:612 Asic[17]:612 Asic[18]:612 Asic[19]:612 Asic[20]:612 Asic[21]:612 Asic[22]:612 Asic[23]:612
    Asic[24]:612 Asic[25]:612 Asic[26]:612 Asic[27]:612 Asic[28]:618 Asic[29]:618 Asic[30]:618 Asic[31]:618
    Asic[32]:618 Asic[33]:618 Asic[34]:618 Asic[35]:618 Asic[36]:618 Asic[37]:618 Asic[38]:618 Asic[39]:618
    Asic[40]:618 Asic[41]:618 Asic[42]:618 Asic[43]:618 Asic[44]:618 Asic[45]:618 Asic[46]:618 Asic[47]:618
    Asic[48]:618 Asic[49]:618 Asic[50]:618 Asic[51]:618 Asic[52]:618 Asic[53]:618 Asic[54]:618 Asic[55]:618
    Asic[56]:618 Asic[57]:618 Asic[58]:618 Asic[59]:618 Asic[60]:618 Asic[61]:618 Asic[62]:618
    driver-btm-c5.c:5110:set_frequency: Chain:7 max freq=618
    driver-btm-c5.c:5111:set_frequency: Chain:7 min freq=612

    driver-btm-c5.c:5119:set_frequency: max freq = 631
    driver-btm-c5.c:4162:ProcessFixFreq: totalRate = 13131, fixed_totalRate = 13000
    driver-btm-c5.c:9604:init_uart_baud: set baud=1
    driver-btm-c5.c:6593:calibration_sensor_offset: Chain[J6] PIC temp offset: 62,0,0,0,0,0,35,28,0,0,0,0,0,0,0,0,0,0,
    driver-btm-c5.c:6627:calibration_sensor_offset: chain[6] temp chip I2C addr=0x98
    driver-btm-c5.c:6635:calibration_sensor_offset: chain[6] has no middle temp, use special fix mode.
    driver-btm-c5.c:6660:calibration_sensor_offset: Chain[J6] chip[244] use PIC middle temp offset=0 typeID=1a
    driver-btm-c5.c:6377:do_calibration_sensor_offset: Warning: Chain[5] chip[244] local:35 remote:-127 offset:-63, will fixed offset=27
    driver-btm-c5.c:6384:do_calibration_sensor_offset: New offset Chain[6] chip[244] local:35 remote:-127 offset:27
    driver-btm-c5.c:6753:calibration_sensor_offset: Chain[J6] chip[244] get middle temp offset=27 typeID=1a
    driver-btm-c5.c:6593:calibration_sensor_offset: Chain[J7] PIC temp offset: 62,-3,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,
    driver-btm-c5.c:6627:calibration_sensor_offset: chain[7] temp chip I2C addr=0x98
    driver-btm-c5.c:6635:calibration_sensor_offset: chain[7] has no middle temp, use special fix mode.
    driver-btm-c5.c:6660:calibration_sensor_offset: Chain[J7] chip[244] use PIC middle temp offset=-3 typeID=55
    driver-btm-c5.c:6384:do_calibration_sensor_offset: New offset Chain[7] chip[244] local:33 remote:37 offset:26
    driver-btm-c5.c:6753:calibration_sensor_offset: Chain[J7] chip[244] get middle temp offset=26 typeID=55
    driver-btm-c5.c:6593:calibration_sensor_offset: Chain[J8] PIC temp offset: 62,0,0,0,0,0,35,28,0,0,0,0,0,0,0,0,0,0,
    driver-btm-c5.c:6627:calibration_sensor_offset: chain[8] temp chip I2C addr=0x98
    driver-btm-c5.c:6635:calibration_sensor_offset: chain[8] has no middle temp, use special fix mode.
    driver-btm-c5.c:6660:calibration_sensor_offset: Chain[J8] chip[244] use PIC middle temp offset=0 typeID=1a
    driver-btm-c5.c:6377:do_calibration_sensor_offset: Warning: Chain[7] chip[244] local:34 remote:124 offset:-58, will fixed offset=27
    driver-btm-c5.c:6384:do_calibration_sensor_offset: New offset Chain[8] chip[244] local:34 remote:124 offset:27
    driver-btm-c5.c:6753:calibration_sensor_offset: Chain[J8] chip[244] get middle temp offset=27 typeID=1a
    driver-btm-c5.c:13651:bitmain_c5_init: single board rate=4376 voltage limit=910 on chain[5]
    driver-btm-c5.c:13688:bitmain_c5_init: get PIC voltage=890 on chain[5], check: must be < 910
    driver-btm-c5.c:13651:bitmain_c5_init: single board rate=4377 voltage limit=910 on chain[6]
    driver-btm-c5.c:13688:bitmain_c5_init: get PIC voltage=900 on chain[6], check: must be < 910
    driver-btm-c5.c:13651:bitmain_c5_init: single board rate=4377 voltage limit=910 on chain[7]
    driver-btm-c5.c:13688:bitmain_c5_init: get PIC voltage=890 on chain[7], check: must be < 910
    driver-btm-c5.c:12103:set_working_voltage: setting to working voltage...
    driver-btm-c5.c:12083:slowly_downgrade_voltage_all_chain: chain[5] set voltage to 930
    driver-btm-c5.c:12083:slowly_downgrade_voltage_all_chain: chain[6] set voltage to 930
    driver-btm-c5.c:12083:slowly_downgrade_voltage_all_chain: chain[7] set voltage to 930
    driver-btm-c5.c:12083:slowly_downgrade_voltage_all_chain: chain[5] set voltage to 920
    driver-btm-c5.c:12083:slowly_downgrade_voltage_all_chain: chain[6] set voltage to 920
    driver-btm-c5.c:12083:slowly_downgrade_voltage_all_chain: chain[7] set voltage to 920
    driver-btm-c5.c:12083:slowly_downgrade_voltage_all_chain: chain[5] set voltage to 910
    driver-btm-c5.c:12083:slowly_downgrade_voltage_all_chain: chain[6] set voltage to 910
    driver-btm-c5.c:12083:slowly_downgrade_voltage_all_chain: chain[7] set voltage to 910
    driver-btm-c5.c:12083:slowly_downgrade_voltage_all_chain: chain[5] set voltage to 900
    driver-btm-c5.c:12083:slowly_downgrade_voltage_all_chain: chain[6] set voltage to 900
    driver-btm-c5.c:12083:slowly_downgrade_voltage_all_chain: chain[7] set voltage to 900
    driver-btm-c5.c:12083:slowly_downgrade_voltage_all_chain: chain[5] set voltage to 890
    driver-btm-c5.c:12083:slowly_downgrade_voltage_all_chain: chain[7] set voltage to 890
    driver-btm-c5.c:13954:bitmain_c5_init: start thread for read temp
    setStartTimePoint total_tv_start_sys=12813 total_tv_end_sys=12814
    driver-btm-c5.c:10320:check_system_work: restartNum = 2 , auto-reinit enabled...
    driver-btm-c5.c:8727:read_temp_func: bring_up_pcb_temp = 50
    driver-btm-c5.c:12103:set_working_voltage: setting to working voltage...
    driver-btm-c5.c:10487:check_system_work: voltage_check_done
    driver-btm-c5.c:9887:if_avg_hash_ok: avg hash rate = 12140.059777, ideal hash rate = 13000
    driver-btm-c5.c:10387:check_system_work: hash rate is low...
    driver-btm-c5.c:10200:check_avg_rate: avg_rate = 13330, ideal_total_hash_rate = 13000
    driver-btm-c5.c:10205:check_avg_rate: avg hash rate is OK
    driver-btm-c5.c:10200:check_avg_rate: avg_rate = 13257, ideal_total_hash_rate = 13000
    driver-btm-c5.c:10205:check_avg_rate: avg hash rate is OK
    driver-btm-c5.c:10200:check_avg_rate: avg_rate = 13244, ideal_total_hash_rate = 13000
    driver-btm-c5.c:10205:check_avg_rate: avg hash rate is OK
    driver-btm-c5.c:10200:check_avg_rate: avg_rate = 13264, ideal_total_hash_rate = 13000
    driver-btm-c5.c:10205:check_avg_rate: avg hash rate is OK
    Fatal Error: network connection lost!
    max pcb temperature:58, fan num:2, error counter:1
    Fatal Error: network connection lost!
    max pcb temperature:58, fan num:2, error counter:2
    driver-btm-c5.c:9037:read_temp_func: Do not clear run bit
    Network connection restore.
    driver-btm-c5.c:10200:check_avg_rate: avg_rate = 13281, ideal_total_hash_rate = 13000
    driver-btm-c5.c:10205:check_avg_rate: avg hash rate is OK
    driver-btm-c5.c:10200:check_avg_rate: avg_rate = 13284, ideal_total_hash_rate = 13000
    driver-btm-c5.c:10205:check_avg_rate: avg hash rate is OK
    Fatal Error: network connection lost!
    max pcb temperature:58, fan num:2, error counter:1
    Fatal Error: network connection lost!
    max pcb temperature:58, fan num:2, error counter:2
    driver-btm-c5.c:9037:read_temp_func: Do not clear run bit
    Fatal Error: network connection lost!
    max pcb temperature:58, fan num:2, error counter:3
    driver-btm-c5.c:9037:read_temp_func: Do not clear run bit
    Fatal Error: network connection lost!
    max pcb temperature:58, fan num:2, error counter:4
    driver-btm-c5.c:9037:read_temp_func: Do not clear run bit
    Network connection restore.
    Fatal Error: network connection lost!
    max pcb temperature:57, fan num:2, error counter:1
    Fatal Error: network connection lost!
    max pcb temperature:57, fan num:2, error counter:2
    driver-btm-c5.c:9037:read_temp_func: Do not clear run bit
    Fatal Error: network connection lost!
    max pcb temperature:57, fan num:2, error counter:3
    driver-btm-c5.c:9037:read_temp_func: Do not clear run bit
    Fatal Error: network connection lost!
    max pcb temperature:58, fan num:2, error counter:4
    driver-btm-c5.c:9037:read_temp_func: Do not clear run bit
    Fatal Error: network connection lost!
    max pcb temperature:57, fan num:2, error counter:5
    driver-btm-c5.c:9037:read_temp_func: Do not clear run bit
    Fatal Error: network connection lost!
    max pcb temperature:58, fan num:2, error counter:6
    driver-btm-c5.c:9037:read_temp_func: Do not clear run bit
    Fatal Error: network connection lost!
    max pcb temperature:57, fan num:2, error counter:7
    driver-btm-c5.c:9037:read_temp_func: Do not clear run bit
    Network connection restore.
    driver-btm-c5.c:10200:check_avg_rate: avg_rate = 13219, ideal_total_hash_rate = 13000
    driver-btm-c5.c:10205:check_avg_rate: avg hash rate is OK
    Fatal Error: network connection lost!
    max pcb temperature:58, fan num:2, error counter:1
    Fatal Error: network connection lost!
    max pcb temperature:57, fan num:2, error counter:2
    driver-btm-c5.c:9037:read_temp_func: Do not clear run bit
    Fatal Error: network connection lost!
    max pcb temperature:57, fan num:2, error counter:3
    driver-btm-c5.c:9037:read_temp_func: Do not clear run bit
    Network connection restore.
    Fatal Error: network connection lost!
    max pcb temperature:58, fan num:2, error counter:1
    Fatal Error: network connection lost!
    max pcb temperature:57, fan num:2, error counter:1
    Fatal Error: network connection lost!
    max pcb temperature:57, fan num:2, error counter:1
    Fatal Error: network connection lost!
    max pcb temperature:57, fan num:2, error counter:2
    driver-btm-c5.c:9037:read_temp_func: Do not clear run bit
    Network connection restore.
    Fatal Error: network connection lost!
    max pcb temperature:57, fan num:2, error counter:1
    Fatal Error: network connection lost!
    max pcb temperature:58, fan num:2, error counter:1
    Fatal Error: network connection lost!
    max pcb temperature:58, fan num:2, error counter:2
    driver-btm-c5.c:9037:read_temp_func: Do not clear run bit
    Fatal Error: network connection lost!
    max pcb temperature:57, fan num:2, error counter:3
    driver-btm-c5.c:9037:read_temp_func: Do not clear run bit
    Fatal Error: network connection lost!
    max pcb temperature:58, fan num:2, error counter:4
    driver-btm-c5.c:9037:read_temp_func: Do not clear run bit
    Fatal Error: network connection lost!
    max pcb temperature:58, fan num:2, error counter:5
    driver-btm-c5.c:9037:read_temp_func: Do not clear run bit
    Network connection restore.
    Fatal Error: network connection lost!
    max pcb temperature:58, fan num:2, error counter:1
    Fatal Error: network connection lost!
    max pcb temperature:58, fan num:2, error counter:2
    driver-btm-c5.c:9037:read_temp_func: Do not clear run bit
    Fatal Error: network connection lost!
    max pcb temperature:58, fan num:2, error counter:3
    driver-btm-c5.c:9037:read_temp_func: Do not clear run bit
    Fatal Error: network connection lost!
    max pcb temperature:57, fan num:2, error counter:4
    driver-btm-c5.c:9037:read_temp_func: Do not clear run bit
    Network connection restore.
    Fatal Error: network connection lost!
    max pcb temperature:58, fan num:2, error counter:1
    Fatal Error: network connection lost!
    max pcb temperature:58, fan num:2, error counter:1
    do read_temp_func once...

    get RT hashrate from Chain[5]: (asic index start from 1-63)
    Asic[01]=67.8630 Asic[02]=69.1220 Asic[03]=67.9140 Asic[04]=71.9570 Asic[05]=69.0040 Asic[06]=71.8730 Asic[07]=69.1890 Asic[08]=65.1960
    Asic[09]=65.5150 Asic[10]=66.4710 Asic[11]=67.6280 Asic[12]=65.8170 Asic[13]=73.4170 Asic[14]=67.9470 Asic[15]=63.7190 Asic[16]=68.7360
    Asic[17]=66.9240 Asic[18]=64.9940 Asic[19]=67.1590 Asic[20]=72.2930 Asic[21]=71.1850 Asic[22]=68.1490 Asic[23]=66.9410 Asic[24]=63.2660
    Asic[25]=73.6510 Asic[26]=72.6280 Asic[27]=67.4440 Asic[28]=72.4770 Asic[29]=69.5410 Asic[30]=72.1580 Asic[31]=67.8130 Asic[32]=72.3760
    Asic[33]=75.2290 Asic[34]=66.8060 Asic[35]=68.4840 Asic[36]=69.9440 Asic[37]=67.7460 Asic[38]=69.0550 Asic[39]=69.2060 Asic[40]=63.3000
    Asic[41]=66.8900 Asic[42]=68.7690 Asic[43]=77.3930 Asic[44]=68.9540 Asic[45]=67.7960 Asic[46]=67.5450 Asic[47]=71.7220 Asic[48]=67.9470
    Asic[49]=78.9870 Asic[50]=67.7290 Asic[51]=68.5180 Asic[52]=78.0140 Asic[53]=66.1020 Asic[54]=68.8360 Asic[55]=72.1080 Asic[56]=71.6380
    Asic[57]=72.0070 Asic[58]=67.4100 Asic[59]=68.9370 Asic[60]=69.9600 Asic[61]=68.8870 Asic[62]=67.1750 Asic[63]=73.4840

    get RT hashrate from Chain[6]: (asic index start from 1-63)
    Asic[01]=52.3950 Asic[02]=69.6590 Asic[03]=67.5280 Asic[04]=61.1190 Asic[05]=72.3930 Asic[06]=70.8160 Asic[07]=59.0890 Asic[08]=72.3090
    Asic[09]=69.6080 Asic[10]=58.5350 Asic[11]=71.5380 Asic[12]=70.0440 Asic[13]=69.2060 Asic[14]=74.7920 Asic[15]=66.3700 Asic[16]=63.9710
    Asic[17]=64.3740 Asic[18]=78.5840 Asic[19]=66.7060 Asic[20]=69.8090 Asic[21]=73.2820 Asic[22]=74.7080 Asic[23]=64.3230 Asic[24]=72.7290
    Asic[25]=70.3970 Asic[26]=75.7990 Asic[27]=72.5270 Asic[28]=69.6250 Asic[29]=73.9530 Asic[30]=62.9310 Asic[31]=69.0550 Asic[32]=70.2620
    Asic[33]=71.2190 Asic[34]=72.2420 Asic[35]=70.1790 Asic[36]=71.0680 Asic[37]=69.4740 Asic[38]=68.6520 Asic[39]=68.7020 Asic[40]=67.9980
    Asic[41]=68.5680 Asic[42]=74.3560 Asic[43]=54.5760 Asic[44]=62.6460 Asic[45]=69.1720 Asic[46]=65.2630 Asic[47]=74.4570 Asic[48]=68.5850
    Asic[49]=70.9840 Asic[50]=64.0880 Asic[51]=75.0270 Asic[52]=69.1720 Asic[53]=72.7790 Asic[54]=80.1270 Asic[55]=69.7090 Asic[56]=69.6590
    Asic[57]=67.5950 Asic[58]=69.6420 Asic[59]=72.6110 Asic[60]=68.4840 Asic[61]=67.5950 Asic[62]=69.3730 Asic[63]=76.5370

    get RT hashrate from Chain[7]: (asic index start from 1-63)
    Asic[01]=66.3700 Asic[02]=69.3400 Asic[03]=65.0780 Asic[04]=69.2060 Asic[05]=73.8530 Asic[06]=69.5080 Asic[07]=66.9570 Asic[08]=73.7690
    Asic[09]=63.4170 Asic[10]=69.6750 Asic[11]=66.3200 Asic[12]=69.4240 Asic[13]=70.7150 Asic[14]=67.2260 Asic[15]=72.4270 Asic[16]=69.8600
    Asic[17]=69.6920 Asic[18]=65.7660 Asic[19]=63.8870 Asic[20]=73.6010 Asic[21]=70.9670 Asic[22]=69.2060 Asic[23]=68.9370 Asic[24]=67.5110
    Asic[25]=68.4670 Asic[26]=67.4940 Asic[27]=72.1420 Asic[28]=69.2730 Asic[29]=69.6420 Asic[30]=68.6520 Asic[31]=68.8030 Asic[32]=69.1550
    Asic[33]=69.5580 Asic[34]=72.5270 Asic[35]=75.6820 Asic[36]=69.9940 Asic[37]=73.3490 Asic[38]=65.4810 Asic[39]=67.6620 Asic[40]=69.3060
    Asic[41]=68.3000 Asic[42]=72.5610 Asic[43]=70.1620 Asic[44]=69.4570 Asic[45]=70.6820 Asic[46]=70.3970 Asic[47]=71.0010 Asic[48]=73.8700
    Asic[49]=69.8770 Asic[50]=69.4740 Asic[51]=72.7120 Asic[52]=72.0410 Asic[53]=77.3930 Asic[54]=69.2060 Asic[55]=74.9770 Asic[56]=72.5950
    Asic[57]=67.4610 Asic[58]=76.0670 Asic[59]=70.6820 Asic[60]=72.3260 Asic[61]=71.5040 Asic[62]=66.0350 Asic[63]=67.0080
    Check Chain[J6] ASIC RT error: (asic index start from 1-63)
    Check Chain[J7] ASIC RT error: (asic index start from 1-63)
    Check Chain[J8] ASIC RT error: (asic index start from 1-63)
    Done check_asic_reg
    Chain[5] Chip[244] pcb temperature=58
    read failed on Chain[5] Chip[62] middle Temp old value:73
    Special fix Chain[5] Chip[62] middle Temp = 73
    Done read temp on Chain[5]
    Chain[6] Chip[244] pcb temperature=52
    Chain[6] Chip[62] junction temperature=64
    Special fix Chain[6] Chip[62] middle Temp = 67
    Done read temp on Chain[6]
    Chain[7] Chip[244] pcb temperature=53
    read failed on Chain[7] Chip[62] middle Temp old value:69
    Special fix Chain[7] Chip[62] middle Temp = 68
    Done read temp on Chain[7]
    Max pcb temp : 58
    set FAN speed according to: temp_highest=58 temp_top1[PWM_T]=58 temp_top1[TEMP_POS_LOCAL]=58 temp_change=0 fix_fan_steps=0
    FAN PWM: 66
    read_temp_func Done!
    CRC error counter=0

     

    thanks,

     

    Mursid

    0
    Comment actions Permalink

    Hello everyone;
    I have the same problem for mining Bitcoin by S9j. All of the three hashboards are healthy, but it seems two of them are not compatible with each other. I pluged out one of the two, and two others are working with normal frequencies. 
    Would you tell me is it a hardware problem or software one. The update belongs to 30/Jul/2019

    0
    Comment actions Permalink

Please sign in to leave a comment.