Comments

2 comments

    Hello, I have problems with my Z15, the machine turns on well and after a few hours it goes into error due to temperature, the error is as follows:
    Sep 8 00:33:45 (none) local0.err cgminer[968]: read_temp_func: Chain1 sensor1 remote temp is 132 `C, higher than MAX_CHIP_TEMP
    Sep 8 00:33:46 (none) local0.err cgminer[968]: Temperature pcb:50/chip:132 is higher than 80/110'C for 1 time, PWM is 63
    Sep 8 00:33:47 (none) local0.err cgminer[968]: Temperature pcb:50/chip:132 is higher than 80/110'C for 2 time, PWM is 63
    Sep 8 00:33:48 (none) local0.err cgminer[968]: check_miner_status: the temperature pcb:50/chip:132 is too high, close PIC and need reboot!!!
    Sep 8 00:33:48 (none) local0.notice cgminer[968]: disable_PIC16F1704_dc_dc_new ok
    Sep 8 00:33:48 (none) local0.notice cgminer[968]: disable_PIC16F1704_dc_dc_new ok
    Sep 8 00:33:48 (none) local0.notice cgminer[968]: disable_PIC16F1704_dc_dc_new ok
    What can I do to solve the problem
    I have already cleaned the plates with air, check the ground connections in the installation
    a greeting

    0
    Comment actions Permalink

    The same problem my friend and I do the same, clean the plates with air and flash with the SD card... the same result, problemns with the temperature and we are in winter now...

    Any idea???

    0
    Comment actions Permalink

Please sign in to leave a comment.