S17 Socket connect failed: Connection refused

Comments

14 comments

  • Hello,Paulosssantos

    Please check if the signal cables are well connected,replug them,if it can not be fixed after doing this,please send it back for repair,sorry about that.

    0
    Comment actions Permalink
    Good afternoon, I have the same problem with
     an S17 the same does not connect, I already did the same steps and nothing works
    but if I leave it off one day she connects and then stops mining please who can help me
    0
    Comment actions Permalink

    Hello Jimi Rojas

    Please post the kernel log of the miner here,and I will help with remote diagnosis,thank you.

    0
    Comment actions Permalink
    Good morning Friends, I tell you, I reset the configuration to factory values ​​of the S17, I updated it to the latest version of the firmware and leave it off for two days, without connection to electricity, after that I programmed it and changed the name of the worker; I already have 3 days working well with the machine without any problem. I have rebooted several times and it reconnects to the Bitmain server;
    Thank you very much for your help if I have problems I will contact you by this means
    THANK YOU....
    0
    Comment actions Permalink

    I wanted to tell you that I am in Venezuela and the problem here is the Electricity that we suffer from blackouts every day and every time the S17 is turned off it was a problem for it to connect to the Bitmain server

    new Thanks

    0
    Comment actions Permalink

    Buenas tardes amigo te digo que he vuelto a tener problemas con el minero

    he does not want to attach the miner kernel I hope you can help me

     

    Booting Linux on physical CPU 0x0
    Linux version 4.6.0-xilinx-gff8137b-dirty (lzq@armdev2) (gcc version 4.8.3 20140320 (prerelease) (Sourcery CodeBench Lite 2014.05-23) ) #25 SMP PREEMPT Fri Nov 23 15:30:52 CST 2018
    CPU: ARMv7 Processor [413fc090] revision 0 (ARMv7), cr=18c5387d
    CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
    Machine model: Xilinx Zynq
    cma: Reserved 16 MiB at 0x0e000000
    Memory policy: Data cache writealloc
    On node 0 totalpages: 61440
    free_area_init_node: node 0, pgdat c0b39280, node_mem_map cde10000
    Normal zone: 480 pages used for memmap
    Normal zone: 0 pages reserved
    Normal zone: 61440 pages, LIFO batch:15
    percpu: Embedded 12 pages/cpu @cddf1000 s19776 r8192 d21184 u49152
    pcpu-alloc: s19776 r8192 d21184 u49152 alloc=12*4096
    pcpu-alloc: [0] 0 [0] 1
    Built 1 zonelists in Zone order, mobility grouping on. Total pages: 60960
    Kernel command line: mem=240M console=ttyPS0,115200 ramdisk_size=33554432 root=/dev/ram rw earlyprintk
    PID hash table entries: 1024 (order: 0, 4096 bytes)
    Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
    Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
    Memory: 203612K/245760K available (6345K kernel code, 231K rwdata, 1896K rodata, 1024K init, 223K bss, 25764K reserved, 16384K cma-reserved, 0K highmem)
    Virtual kernel memory layout:
    vector : 0xffff0000 - 0xffff1000 ( 4 kB)
    fixmap : 0xffc00000 - 0xfff00000 (3072 kB)
    vmalloc : 0xcf800000 - 0xff800000 ( 768 MB)
    lowmem : 0xc0000000 - 0xcf000000 ( 240 MB)
    pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
    modules : 0xbf000000 - 0xbfe00000 ( 14 MB)
    .text : 0xc0008000 - 0xc090c424 (9234 kB)
    .init : 0xc0a00000 - 0xc0b00000 (1024 kB)
    .data : 0xc0b00000 - 0xc0b39fe0 ( 232 kB)
    .bss : 0xc0b39fe0 - 0xc0b71c28 ( 224 kB)
    Preemptible hierarchical RCU implementation.
    Build-time adjustment of leaf fanout to 32.
    RCU restricting CPUs from NR_CPUS=4 to nr_cpu_ids=2.
    RCU: Adjusting geometry for rcu_fanout_leaf=32, nr_cpu_ids=2
    NR_IRQS:16 nr_irqs:16 16
    efuse mapped to cf800000
    ps7-slcr mapped to cf802000
    L2C: platform modifies aux control register: 0x72360000 -> 0x72760000
    L2C: DT/platform modifies aux control register: 0x72360000 -> 0x72760000
    L2C-310 erratum 769419 enabled
    L2C-310 enabling early BRESP for Cortex-A9
    L2C-310 full line of zeros enabled for Cortex-A9
    L2C-310 ID prefetch enabled, offset 1 lines
    L2C-310 dynamic clock gating enabled, standby mode enabled
    L2C-310 cache controller enabled, 8 ways, 512 kB
    L2C-310: CACHE_ID 0x410000c8, AUX_CTRL 0x76760001
    zynq_clock_init: clkc starts at cf802100
    Zynq clock init
    sched_clock: 64 bits at 333MHz, resolution 3ns, wraps every 4398046511103ns
    clocksource: arm_global_timer: mask: 0xffffffffffffffff max_cycles: 0x4ce07af025, max_idle_ns: 440795209040 ns
    Switching to timer-based delay loop, resolution 3ns
    clocksource: ttc_clocksource: mask: 0xffff max_cycles: 0xffff, max_idle_ns: 537538477 ns
    ps7-ttc #0 at cf80a000, irq=18
    Console: colour dummy device 80x30
    Calibrating delay loop (skipped), value calculated using timer frequency.. 666.66 BogoMIPS (lpj=3333333)
    pid_max: default: 32768 minimum: 301
    Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
    Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
    CPU: Testing write buffer coherency: ok
    CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
    Setting up static identity map for 0x100000 - 0x100058
    CPU1: failed to boot: -1
    Brought up 1 CPUs
    SMP: Total of 1 processors activated (666.66 BogoMIPS).
    CPU: All CPU(s) started in SVC mode.
    devtmpfs: initialized
    VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 4
    clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
    pinctrl core: initialized pinctrl subsystem
    NET: Registered protocol family 16
    DMA: preallocated 256 KiB pool for atomic coherent allocations
    cpuidle: using governor menu
    hw-breakpoint: found 5 (+1 reserved) breakpoint and 1 watchpoint registers.
    hw-breakpoint: maximum watchpoint size is 4 bytes.
    zynq-ocm f800c000.ps7-ocmc: ZYNQ OCM pool: 256 KiB @ 0xcf880000
    vgaarb: loaded
    SCSI subsystem initialized
    usbcore: registered new interface driver usbfs
    usbcore: registered new interface driver hub
    usbcore: registered new device driver usb
    media: Linux media interface: v0.10
    Linux video capture interface: v2.00
    pps_core: LinuxPPS API ver. 1 registered
    pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
    PTP clock support registered
    EDAC MC: Ver: 3.0.0
    Advanced Linux Sound Architecture Driver Initialized.
    clocksource: Switched to clocksource arm_global_timer
    NET: Registered protocol family 2
    TCP established hash table entries: 2048 (order: 1, 8192 bytes)
    TCP bind hash table entries: 2048 (order: 2, 16384 bytes)
    TCP: Hash tables configured (established 2048 bind 2048)
    UDP hash table entries: 256 (order: 1, 8192 bytes)
    UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
    NET: Registered protocol family 1
    RPC: Registered named UNIX socket transport module.
    RPC: Registered udp transport module.
    RPC: Registered tcp transport module.
    RPC: Registered tcp NFSv4.1 backchannel transport module.
    PCI: CLS 0 bytes, default 64
    Trying to unpack rootfs image as initramfs...
    rootfs image is not initramfs (no cpio magic); looks like an initrd
    Freeing initrd memory: 12724K (cce94000 - cdb01000)
    hw perfevents: enabled with armv7_cortex_a9 PMU driver, 7 counters available
    futex hash table entries: 512 (order: 3, 32768 bytes)
    workingset: timestamp_bits=28 max_order=16 bucket_order=0
    jffs2: version 2.2. (NAND) (SUMMARY) © 2001-2006 Red Hat, Inc.
    io scheduler noop registered
    io scheduler deadline registered
    io scheduler cfq registered (default)
    dma-pl330 f8003000.ps7-dma: Loaded driver for PL330 DMAC-241330
    dma-pl330 f8003000.ps7-dma: DBUFF-128x8bytes Num_Chans-8 Num_Peri-4 Num_Events-16
    e0000000.serial: ttyPS0 at MMIO 0xe0000000 (irq = 158, base_baud = 6249999) is a xuartps
    console [ttyPS0] enabled
    xdevcfg f8007000.ps7-dev-cfg: ioremap 0xf8007000 to cf86e000
    [drm] Initialized drm 1.1.0 20060810
    brd: module loaded
    loop: module loaded
    CAN device driver interface
    gpiod_set_value: invalid GPIO
    libphy: MACB_mii_bus: probed
    macb e000b000.ethernet eth0: Cadence GEM rev 0x00020118 at 0xe000b000 irq 31 (00:0a:35:00:00:00)
    Generic PHY e000b000.etherne:00: attached PHY driver [Generic PHY] (mii_bus:phy_addr=e000b000.etherne:00, irq=-1)
    e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k
    e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
    ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
    ehci-pci: EHCI PCI platform driver
    usbcore: registered new interface driver usb-storage
    mousedev: PS/2 mouse device common for all mice
    i2c /dev entries driver
    Xilinx Zynq CpuIdle Driver started
    sdhci: Secure Digital Host Controller Interface driver
    sdhci: Copyright(c) Pierre Ossman
    sdhci-pltfm: SDHCI platform and OF driver helper
    mmc0: SDHCI controller on e0100000.ps7-sdio [e0100000.ps7-sdio] using ADMA
    ledtrig-cpu: registered to indicate activity on CPUs
    usbcore: registered new interface driver usbhid
    usbhid: USB HID core driver
    nand: device found, Manufacturer ID: 0x2c, Chip ID: 0xda
    nand: Micron MT29F2G08ABAGAWP
    nand: 256 MiB, SLC, erase size: 128 KiB, page size: 2048, OOB size: 128
    nand: WARNING: pl35x-nand: the ECC used on your system is too weak compared to the one required by the NAND chip
    Bad block table found at page 131008, version 0x01
    Bad block table found at page 130944, version 0x01
    6 ofpart partitions found on MTD device pl35x-nand
    Creating 6 MTD partitions on "pl35x-nand":
    0x000000000000-0x000002800000 : "BOOT.bin-env-dts-kernel"
    0x000002800000-0x000004800000 : "ramfs"
    0x000004800000-0x000005000000 : "configs"
    0x000005000000-0x000006000000 : "reserve"
    0x000006000000-0x000008000000 : "ramfs-bak"
    0x000008000000-0x000010000000 : "reserve1"
    NET: Registered protocol family 10
    sit: IPv6 over IPv4 tunneling driver
    NET: Registered protocol family 17
    can: controller area network core (rev 20120528 abi 9)
    NET: Registered protocol family 29
    can: raw protocol (rev 20120528)
    can: broadcast manager protocol (rev 20120528 t)
    can: netlink gateway (rev 20130117) max_hops=1
    zynq_pm_ioremap: no compatible node found for 'xlnx,zynq-ddrc-a05'
    zynq_pm_late_init: Unable to map DDRC IO memory.
    Registering SWP/SWPB emulation handler
    hctosys: unable to open rtc device (rtc0)
    ALSA device list:
    No soundcards found.
    RAMDISK: gzip image found at block 0
    EXT4-fs (ram0): couldn't mount as ext3 due to feature incompatibilities
    EXT4-fs (ram0): mounted filesystem without journal. Opts: (null)
    VFS: Mounted root (ext4 filesystem) on device 1:0.
    devtmpfs: mounted
    Freeing unused kernel memory: 1024K (c0a00000 - c0b00000)
    EXT4-fs (ram0): re-mounted. Opts: block_validity,delalloc,barrier,user_xattr
    random: dd urandom read with 0 bits of entropy available
    ubi0: attaching mtd2
    ubi0: scanning is finished
    ubi0: attached mtd2 (name "configs", size 8 MiB)
    ubi0: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes
    ubi0: min./max. I/O unit sizes: 2048/2048, sub-page size 2048
    ubi0: VID header offset: 2048 (aligned 2048), data offset: 4096
    ubi0: good PEBs: 64, bad PEBs: 0, corrupted PEBs: 0
    ubi0: user volume: 1, internal volumes: 1, max. volumes count: 128
    ubi0: max/mean erase counter: 28/12, WL threshold: 4096, image sequence number: 306349061
    ubi0: available PEBs: 0, total reserved PEBs: 64, PEBs reserved for bad PEB handling: 40
    ubi0: background thread "ubi_bgt0d" started, PID 708
    UBIFS (ubi0:0): background thread "ubifs_bgt0_0" started, PID 711
    UBIFS (ubi0:0): recovery needed
    UBIFS (ubi0:0): recovery completed
    UBIFS (ubi0:0): UBIFS: mounted UBI device 0, volume 0, name "configs"
    UBIFS (ubi0:0): LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
    UBIFS (ubi0:0): FS size: 1396736 bytes (1 MiB, 11 LEBs), journal size 888833 bytes (0 MiB, 5 LEBs)
    UBIFS (ubi0:0): reserved for root: 65970 bytes (64 KiB)
    UBIFS (ubi0:0): media format: w4/r0 (latest is w4/r0), UUID 038216C1-D266-46DA-A76E-C04B142933A3, small LPT model
    ubi1: attaching mtd5
    ubi1: scanning is finished
    ubi1: attached mtd5 (name "reserve1", size 128 MiB)
    ubi1: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes
    ubi1: min./max. I/O unit sizes: 2048/2048, sub-page size 2048
    ubi1: VID header offset: 2048 (aligned 2048), data offset: 4096
    ubi1: good PEBs: 1020, bad PEBs: 4, corrupted PEBs: 0
    ubi1: user volume: 1, internal volumes: 1, max. volumes count: 128
    ubi1: max/mean erase counter: 4113/798, WL threshold: 4096, image sequence number: 1751317449
    ubi1: available PEBs: 0, total reserved PEBs: 1020, PEBs reserved for bad PEB handling: 36
    ubi1: background thread "ubi_bgt1d" started, PID 720
    UBIFS (ubi1:0): background thread "ubifs_bgt1_0" started, PID 723
    UBIFS (ubi1:0): recovery needed
    UBIFS (ubi1:0): recovery completed
    UBIFS (ubi1:0): UBIFS: mounted UBI device 1, volume 0, name "reserve1"
    UBIFS (ubi1:0): LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
    UBIFS (ubi1:0): FS size: 123039744 bytes (117 MiB, 969 LEBs), journal size 6221824 bytes (5 MiB, 49 LEBs)
    UBIFS (ubi1:0): reserved for root: 4952683 bytes (4836 KiB)
    UBIFS (ubi1:0): media format: w4/r0 (latest is w4/r0), UUID 51C7124B-A562-4AA0-948B-184BE8DB9030, small LPT model
    alloc_contig_range: [e042, e043) PFNs busy
    alloc_contig_range: [e042, e043) PFNs busy
    IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
    alloc_contig_range: [e042, e043) PFNs busy
    alloc_contig_range: [e042, e043) PFNs busy
    IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
    macb e000b000.ethernet eth0: unable to generate target frequency: 25000000 Hz
    macb e000b000.ethernet eth0: link up (100/Full)
    IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
    In axi fpga driver!
    request_mem_region OK!
    AXI fpga dev virtual address is 0xcfb38000
    *base_vir_addr = 0xab013
    In fpga mem driver!
    request_mem_region OK!
    fpga mem virtual address is 0xd2000000
    random: nonblocking pool is initialized
    Aug 13 21:06:16 (none) user.notice kernel: random: nonblocking pool is initialized
    2020-08-13 20:31:05 driver-btm-api.c:542:init_freq_mode: This is scan-user version
    2020-08-13 20:31:05 driver-btm-api.c:1877:bitmain_soc_init: opt_multi_version = 1
    2020-08-13 20:31:05 driver-btm-api.c:1878:bitmain_soc_init: opt_bitmain_ab = 1
    2020-08-13 20:31:05 driver-btm-api.c:1879:bitmain_soc_init: opt_bitmain_work_mode = 2
    2020-08-13 20:31:05 driver-btm-api.c:1880:bitmain_soc_init: Miner compile time: Mon Apr 27 13:23:07 CST 2020 type: Antminer S17
    2020-08-13 20:31:05 driver-btm-api.c:1881:bitmain_soc_init: commit version: d22f356 2020-04-24 18:30:49, build by: lol 2020-04-27 13:30:25
    2020-08-13 20:31:05 driver-btm-api.c:1691:show_sn: no SN got, please write SN to /nvdata/sn
    2020-08-13 20:31:05 driver-btm-api.c:1040:miner_device_init: Detect 256MB control board of XILINX
    2020-08-13 20:31:05 driver-btm-api.c:988:init_fan_parameter: fan_eft : 0 fan_pwm : 0
    2020-08-13 20:31:05 thread.c:783:create_read_nonce_reg_thread: create thread
    2020-08-13 20:31:11 driver-btm-api.c:972:init_miner_version: miner ID : 801c45842b104814
    2020-08-13 20:31:11 driver-btm-api.c:978:init_miner_version: FPGA Version = 0xB013
    2020-08-13 20:31:16 driver-btm-api.c:616:get_product_id: product_id[0] = 1
    2020-08-13 20:31:16 driver-btm-api.c:616:get_product_id: product_id[1] = 1
    2020-08-13 20:31:16 driver-btm-api.c:616:get_product_id: product_id[2] = 1
    2020-08-13 20:31:16 driver-btm-api.c:560:_set_project_type: project:1
    2020-08-13 20:31:16 driver-btm-api.c:585:_set_project_type: Project type: Antminer S17
    2020-08-13 20:31:16 driver-btm-api.c:596:dump_pcb_bom_version: Chain [0] PCB Version: 0x0101
    2020-08-13 20:31:16 driver-btm-api.c:597:dump_pcb_bom_version: Chain [0] BOM Version: 0x0103
    2020-08-13 20:31:16 driver-btm-api.c:596:dump_pcb_bom_version: Chain [1] PCB Version: 0x0101
    2020-08-13 20:31:16 driver-btm-api.c:597:dump_pcb_bom_version: Chain [1] BOM Version: 0x0103
    2020-08-13 20:31:16 driver-btm-api.c:596:dump_pcb_bom_version: Chain [2] PCB Version: 0x0101
    2020-08-13 20:31:16 driver-btm-api.c:597:dump_pcb_bom_version: Chain [2] BOM Version: 0x0103
    2020-08-13 20:31:17 driver-btm-api.c:1802:bitmain_board_init: Fan check passed.
    2020-08-13 20:31:18 board.c:36:jump_and_app_check_restore_pic: chain[0] PIC jump to app
    2020-08-13 20:31:20 board.c:40:jump_and_app_check_restore_pic: Check chain[0] PIC fw version=0xb9
    2020-08-13 20:31:22 board.c:36:jump_and_app_check_restore_pic: chain[1] PIC jump to app
    2020-08-13 20:31:24 board.c:40:jump_and_app_check_restore_pic: Check chain[1] PIC fw version=0xb9
    2020-08-13 20:31:25 board.c:36:jump_and_app_check_restore_pic: chain[2] PIC jump to app
    2020-08-13 20:31:27 board.c:40:jump_and_app_check_restore_pic: Check chain[2] PIC fw version=0xb9
    2020-08-13 20:31:27 thread.c:778:create_pic_heart_beat_thread: create thread
    2020-08-13 20:31:27 power_api.c:207:power_init: Power init:
    2020-08-13 20:31:27 power_api.c:208:power_init: current_voltage_raw = 0
    2020-08-13 20:31:27 power_api.c:209:power_init: highest_voltage_raw = 2100
    2020-08-13 20:31:27 power_api.c:210:power_init: working_voltage_raw = 1830
    2020-08-13 20:31:27 power_api.c:211:power_init: higher_voltage_raw = 1950
    2020-08-13 20:31:27 driver-btm-api.c:1812:bitmain_board_init: Enter 30s sleep to make sure power release finish.
    2020-08-13 20:31:59 power_api.c:251:set_to_highest_voltage: Set to voltage raw 2100, one step.
    2020-08-13 20:32:01 power_api.c:87:check_voltage_multi: retry time: 0
    2020-08-13 20:32:02 power_api.c:37:_get_avg_voltage: chain = 0, voltage = 21.369433
    2020-08-13 20:32:03 power_api.c:37:_get_avg_voltage: chain = 1, voltage = 21.400049
    2020-08-13 20:32:04 power_api.c:37:_get_avg_voltage: chain = 2, voltage = 21.381679
    2020-08-13 20:32:04 power_api.c:50:_get_avg_voltage: average_voltage = 21.383720
    2020-08-13 20:32:04 power_api.c:68:check_voltage: target_vol = 21.00, actural_vol = 21.38, check voltage passed.
    2020-08-13 20:32:04 uart.c:71:set_baud: set fpga_baud to 115200
    2020-08-13 20:32:15 driver-btm-api.c:915:check_asic_number_with_power_on: Chain[0]: find 48 asic, times 0
    2020-08-13 20:32:26 driver-btm-api.c:915:check_asic_number_with_power_on: Chain[1]: find 48 asic, times 0
    2020-08-13 20:32:37 driver-btm-api.c:915:check_asic_number_with_power_on: Chain[2]: find 48 asic, times 0
    2020-08-13 20:32:42 driver-btm-api.c:345:set_order_clock: chain[0]: set order clock, stragegy 3
    2020-08-13 20:32:43 driver-btm-api.c:345:set_order_clock: chain[1]: set order clock, stragegy 3
    2020-08-13 20:32:43 driver-btm-api.c:345:set_order_clock: chain[2]: set order clock, stragegy 3
    2020-08-13 20:32:43 driver-hash-chip.c:502:set_clock_delay_control: core_data = 0xb4
    2020-08-13 20:32:43 uart.c:71:set_baud: set fpga_baud to 3000000
    2020-08-13 20:32:43 driver-btm-api.c:1574:check_clock_counter: freq 50 clock_counter_limit 6
    2020-08-13 20:32:45 uart.c:71:set_baud: set fpga_baud to 115200
    2020-08-13 20:32:45 voltage[0] = 1860
    2020-08-13 20:32:45 voltage[1] = 1860
    2020-08-13 20:32:45 voltage[2] = 1860
    2020-08-13 20:32:45 power_api.c:219:set_working_voltage_raw: working_voltage_raw = 1860
    2020-08-13 20:32:45 temperature.c:202:is_temp_sensor_type_correct: Wrong temp sensor type, chain = 0, sensor = 8, type = 0x0, retry.
    2020-08-13 20:32:45 temperature.c:202:is_temp_sensor_type_correct: Wrong temp sensor type, chain = 0, sensor = 8, type = 0x0, retry.
    2020-08-13 20:32:46 temperature.c:202:is_temp_sensor_type_correct: Wrong temp sensor type, chain = 0, sensor = 8, type = 0x0, retry.
    2020-08-13 20:32:46 temperature.c:202:is_temp_sensor_type_correct: Wrong temp sensor type, chain = 0, sensor = 8, type = 0x0, retry.
    2020-08-13 20:32:46 driver-btm-api.c:198:set_miner_status: ERROR_TEMP_LOST
    2020-08-13 20:32:46 driver-btm-api.c:139:stop_mining: stop mining: Can't get temperature sensor type!
    2020-08-13 20:32:46 thread.c:828:cancel_read_nonce_reg_thread: cancel thread
    2020-08-13 20:32:46 driver-btm-api.c:124:killall_hashboard: ****power off hashboard****

    0
    Comment actions Permalink

    Hi everyone

    I have the same problem with S17 + miners, I already did the above steps, even other tests

    2 miners were taken, one with failure and the other without failure, the two miners were exchanged between them the controlboard, resulting in the following:

    The control board of the miner that has a fault, was installed in a miner that does not present any fault, this miner with that controlboard connected without problem

    The control board of the miner that did not have failures was installed in the miner that has failures, this miner with that controlboard continues to present the same failure, this even changing the controlboard

    As a note: the previously crashed miner had the PSU changed, the controlboard connectors to the hashboards, and even the hashboards were changed from slots

     

    0
    Comment actions Permalink

    I just upload new firmware on my S17+ 70TH device,

    but now i got same error.

    also check all your offers .

    below is my kernel log:

     

    Booting Linux on physical CPU 0x0

    Linux version 4.6.0-xilinx-gff8137b-dirty (lzq@armdev2) (gcc version 4.8.3 20140320 (prerelease) (Sourcery CodeBench Lite 2014.05-23) ) #25 SMP PREEMPT Fri Nov 23 15:30:52 CST 2018

    CPU: ARMv7 Processor [413fc090] revision 0 (ARMv7), cr=18c5387d

    CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache

    Machine model: Xilinx Zynq

    cma: Reserved 16 MiB at 0x0e000000

    Memory policy: Data cache writealloc

    On node 0 totalpages: 61440

    free_area_init_node: node 0, pgdat c0b39280, node_mem_map cde10000

      Normal zone: 480 pages used for memmap

      Normal zone: 0 pages reserved

      Normal zone: 61440 pages, LIFO batch:15

    percpu: Embedded 12 pages/cpu @cddf1000 s19776 r8192 d21184 u49152

    pcpu-alloc: s19776 r8192 d21184 u49152 alloc=12*4096

    pcpu-alloc: [0] 0 [0] 1

    Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 60960

    Kernel command line: mem=240M console=ttyPS0,115200 ramdisk_size=33554432 root=/dev/ram rw earlyprintk

    PID hash table entries: 1024 (order: 0, 4096 bytes)

    Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)

    Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)

    Memory: 203432K/245760K available (6345K kernel code, 231K rwdata, 1896K rodata, 1024K init, 223K bss, 25944K reserved, 16384K cma-reserved, 0K highmem)

    Virtual kernel memory layout:

        vector  : 0xffff0000 - 0xffff1000   (   4 kB)

        fixmap  : 0xffc00000 - 0xfff00000   (3072 kB)

        vmalloc : 0xcf800000 - 0xff800000   ( 768 MB)

        lowmem  : 0xc0000000 - 0xcf000000   ( 240 MB)

        pkmap   : 0xbfe00000 - 0xc0000000   (   2 MB)

        modules : 0xbf000000 - 0xbfe00000   (  14 MB)

          .text : 0xc0008000 - 0xc090c424   (9234 kB)

          .init : 0xc0a00000 - 0xc0b00000   (1024 kB)

          .data : 0xc0b00000 - 0xc0b39fe0   ( 232 kB)

           .bss : 0xc0b39fe0 - 0xc0b71c28   ( 224 kB)

    Preemptible hierarchical RCU implementation.

                  Build-time adjustment of leaf fanout to 32.

                  RCU restricting CPUs from NR_CPUS=4 to nr_cpu_ids=2.

    RCU: Adjusting geometry for rcu_fanout_leaf=32, nr_cpu_ids=2

    NR_IRQS:16 nr_irqs:16 16

    efuse mapped to cf800000

    ps7-slcr mapped to cf802000

    L2C: platform modifies aux control register: 0x72360000 -> 0x72760000

    L2C: DT/platform modifies aux control register: 0x72360000 -> 0x72760000

    L2C-310 erratum 769419 enabled

    L2C-310 enabling early BRESP for Cortex-A9

    L2C-310 full line of zeros enabled for Cortex-A9

    L2C-310 ID prefetch enabled, offset 1 lines

    L2C-310 dynamic clock gating enabled, standby mode enabled

    L2C-310 cache controller enabled, 8 ways, 512 kB

    L2C-310: CACHE_ID 0x410000c8, AUX_CTRL 0x76760001

    zynq_clock_init: clkc starts at cf802100

    Zynq clock init

    sched_clock: 64 bits at 333MHz, resolution 3ns, wraps every 4398046511103ns

    clocksource: arm_global_timer: mask: 0xffffffffffffffff max_cycles: 0x4ce07af025, max_idle_ns: 440795209040 ns

    Switching to timer-based delay loop, resolution 3ns

    clocksource: ttc_clocksource: mask: 0xffff max_cycles: 0xffff, max_idle_ns: 537538477 ns

    ps7-ttc #0 at cf80a000, irq=18

    Console: colour dummy device 80x30

    Calibrating delay loop (skipped), value calculated using timer frequency.. 666.66 BogoMIPS (lpj=3333333)

    pid_max: default: 32768 minimum: 301

    Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)

    Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)

    CPU: Testing write buffer coherency: ok

    CPU0: thread -1, cpu 0, socket 0, mpidr 80000000

    Setting up static identity map for 0x100000 - 0x100058

    CPU1: failed to boot: -1

    Brought up 1 CPUs

    SMP: Total of 1 processors activated (666.66 BogoMIPS).

    CPU: All CPU(s) started in SVC mode.

    devtmpfs: initialized

    VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 4

    clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns

    pinctrl core: initialized pinctrl subsystem

    NET: Registered protocol family 16

    DMA: preallocated 256 KiB pool for atomic coherent allocations

    cpuidle: using governor menu

    hw-breakpoint: found 5 (+1 reserved) breakpoint and 1 watchpoint registers.

    hw-breakpoint: maximum watchpoint size is 4 bytes.

    zynq-ocm f800c000.ps7-ocmc: ZYNQ OCM pool: 256 KiB @ 0xcf880000

    vgaarb: loaded

    SCSI subsystem initialized

    usbcore: registered new interface driver usbfs

    usbcore: registered new interface driver hub

    usbcore: registered new device driver usb

    media: Linux media interface: v0.10

    Linux video capture interface: v2.00

    pps_core: LinuxPPS API ver. 1 registered

    pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>

    PTP clock support registered

    EDAC MC: Ver: 3.0.0

    Advanced Linux Sound Architecture Driver Initialized.

    clocksource: Switched to clocksource arm_global_timer

    NET: Registered protocol family 2

    TCP established hash table entries: 2048 (order: 1, 8192 bytes)

    TCP bind hash table entries: 2048 (order: 2, 16384 bytes)

    TCP: Hash tables configured (established 2048 bind 2048)

    UDP hash table entries: 256 (order: 1, 8192 bytes)

    UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)

    NET: Registered protocol family 1

    RPC: Registered named UNIX socket transport module.

    RPC: Registered udp transport module.

    RPC: Registered tcp transport module.

    RPC: Registered tcp NFSv4.1 backchannel transport module.

    PCI: CLS 0 bytes, default 64

    Trying to unpack rootfs image as initramfs...

    rootfs image is not initramfs (no cpio magic); looks like an initrd

    Freeing initrd memory: 12904K (cce67000 - cdb01000)

    hw perfevents: enabled with armv7_cortex_a9 PMU driver, 7 counters available

    futex hash table entries: 512 (order: 3, 32768 bytes)

    workingset: timestamp_bits=28 max_order=16 bucket_order=0

    jffs2: version 2.2. (NAND) (SUMMARY)  © 2001-2006 Red Hat, Inc.

    io scheduler noop registered

    io scheduler deadline registered

    io scheduler cfq registered (default)

    dma-pl330 f8003000.ps7-dma: Loaded driver for PL330 DMAC-241330

    dma-pl330 f8003000.ps7-dma: DBUFF-128x8bytes Num_Chans-8 Num_Peri-4 Num_Events-16

    e0000000.serial: ttyPS0 at MMIO 0xe0000000 (irq = 158, base_baud = 6249999) is a xuartps

    console [ttyPS0] enabled

    xdevcfg f8007000.ps7-dev-cfg: ioremap 0xf8007000 to cf86e000

    [drm] Initialized drm 1.1.0 20060810

    brd: module loaded

    loop: module loaded

    CAN device driver interface

    gpiod_set_value: invalid GPIO

    libphy: MACB_mii_bus: probed

    macb e000b000.ethernet eth0: Cadence GEM rev 0x00020118 at 0xe000b000 irq 31 (00:0a:35:00:00:00)

    Generic PHY e000b000.etherne:00: attached PHY driver [Generic PHY] (mii_bus:phy_addr=e000b000.etherne:00, irq=-1)

    e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k

    e1000e: Copyright(c) 1999 - 2015 Intel Corporation.

    ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver

    ehci-pci: EHCI PCI platform driver

    usbcore: registered new interface driver usb-storage

    mousedev: PS/2 mouse device common for all mice

    i2c /dev entries driver

    Xilinx Zynq CpuIdle Driver started

    sdhci: Secure Digital Host Controller Interface driver

    sdhci: Copyright(c) Pierre Ossman

    sdhci-pltfm: SDHCI platform and OF driver helper

    mmc0: SDHCI controller on e0100000.ps7-sdio [e0100000.ps7-sdio] using ADMA

    ledtrig-cpu: registered to indicate activity on CPUs

    usbcore: registered new interface driver usbhid

    usbhid: USB HID core driver

    nand: device found, Manufacturer ID: 0x2c, Chip ID: 0xda

    nand: Micron MT29F2G08ABAGAWP

    nand: 256 MiB, SLC, erase size: 128 KiB, page size: 2048, OOB size: 128

    nand: WARNING: pl35x-nand: the ECC used on your system is too weak compared to the one required by the NAND chip

    Bad block table found at page 131008, version 0x01

    Bad block table found at page 130944, version 0x01

    6 ofpart partitions found on MTD device pl35x-nand

    Creating 6 MTD partitions on "pl35x-nand":

    0x000000000000-0x000002800000 : "BOOT.bin-env-dts-kernel"

    0x000002800000-0x000004800000 : "ramfs"

    0x000004800000-0x000005000000 : "configs"

    0x000005000000-0x000006000000 : "reserve"

    0x000006000000-0x000008000000 : "ramfs-bak"

    0x000008000000-0x000010000000 : "reserve1"

    NET: Registered protocol family 10

    sit: IPv6 over IPv4 tunneling driver

    NET: Registered protocol family 17

    can: controller area network core (rev 20120528 abi 9)

    NET: Registered protocol family 29

    can: raw protocol (rev 20120528)

    can: broadcast manager protocol (rev 20120528 t)

    can: netlink gateway (rev 20130117) max_hops=1

    zynq_pm_ioremap: no compatible node found for 'xlnx,zynq-ddrc-a05'

    zynq_pm_late_init: Unable to map DDRC IO memory.

    Registering SWP/SWPB emulation handler

    hctosys: unable to open rtc device (rtc0)

    ALSA device list:

      No soundcards found.

    RAMDISK: gzip image found at block 0

    EXT4-fs (ram0): couldn't mount as ext3 due to feature incompatibilities

    EXT4-fs (ram0): mounted filesystem without journal. Opts: (null)

    VFS: Mounted root (ext4 filesystem) on device 1:0.

    devtmpfs: mounted

    Freeing unused kernel memory: 1024K (c0a00000 - c0b00000)

    EXT4-fs (ram0): re-mounted. Opts: block_validity,delalloc,barrier,user_xattr

    random: dd urandom read with 0 bits of entropy available

    ubi0: attaching mtd2

    ubi0: scanning is finished

    ubi0: attached mtd2 (name "configs", size 8 MiB)

    ubi0: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes

    ubi0: min./max. I/O unit sizes: 2048/2048, sub-page size 2048

    ubi0: VID header offset: 2048 (aligned 2048), data offset: 4096

    ubi0: good PEBs: 64, bad PEBs: 0, corrupted PEBs: 0

    ubi0: user volume: 1, internal volumes: 1, max. volumes count: 128

    ubi0: max/mean erase counter: 20/8, WL threshold: 4096, image sequence number: 237714726

    ubi0: available PEBs: 0, total reserved PEBs: 64, PEBs reserved for bad PEB handling: 40

    ubi0: background thread "ubi_bgt0d" started, PID 708

    UBIFS (ubi0:0): background thread "ubifs_bgt0_0" started, PID 711

    UBIFS (ubi0:0): UBIFS: mounted UBI device 0, volume 0, name "configs"

    UBIFS (ubi0:0): LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes

    UBIFS (ubi0:0): FS size: 1396736 bytes (1 MiB, 11 LEBs), journal size 888833 bytes (0 MiB, 5 LEBs)

    UBIFS (ubi0:0): reserved for root: 65970 bytes (64 KiB)

    UBIFS (ubi0:0): media format: w4/r0 (latest is w4/r0), UUID FF09433B-E002-4C29-97EC-6220DDC4BB36, small LPT model

    ubi1: attaching mtd5

    ubi1: scanning is finished

    ubi1: attached mtd5 (name "reserve1", size 128 MiB)

    ubi1: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes

    ubi1: min./max. I/O unit sizes: 2048/2048, sub-page size 2048

    ubi1: VID header offset: 2048 (aligned 2048), data offset: 4096

    ubi1: good PEBs: 1020, bad PEBs: 4, corrupted PEBs: 0

    ubi1: user volume: 1, internal volumes: 1, max. volumes count: 128

    ubi1: max/mean erase counter: 1163/247, WL threshold: 4096, image sequence number: 3265111179

    ubi1: available PEBs: 0, total reserved PEBs: 1020, PEBs reserved for bad PEB handling: 36

    ubi1: background thread "ubi_bgt1d" started, PID 720

    UBIFS (ubi1:0): background thread "ubifs_bgt1_0" started, PID 723

    UBIFS (ubi1:0): UBIFS: mounted UBI device 1, volume 0, name "reserve1"

    UBIFS (ubi1:0): LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes

    UBIFS (ubi1:0): FS size: 123039744 bytes (117 MiB, 969 LEBs), journal size 6221824 bytes (5 MiB, 49 LEBs)

    UBIFS (ubi1:0): reserved for root: 4952683 bytes (4836 KiB)

    UBIFS (ubi1:0): media format: w4/r0 (latest is w4/r0), UUID 1AF6F1E1-61F0-462C-AE44-C7D9596CF7E2, small LPT model

    IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready

    IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready

    macb e000b000.ethernet eth0: unable to generate target frequency: 25000000 Hz

    macb e000b000.ethernet eth0: link up (100/Full)

    IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready

    In axi fpga driver!

    request_mem_region OK!

    AXI fpga dev virtual address is 0xcfb38000

    *base_vir_addr = 0xb023

    In fpga mem driver!

    request_mem_region OK!

    fpga mem virtual address is 0xd2000000

    2020-11-21 15:01:42 driver-btm-api.c:779:init_freq_mode: This is scan-user version

    2020-11-21 15:01:42 driver-btm-api.c:2451:bitmain_soc_init: opt_multi_version     = 1

    2020-11-21 15:01:42 driver-btm-api.c:2452:bitmain_soc_init: opt_bitmain_ab        = 1

    2020-11-21 15:01:42 driver-btm-api.c:2453:bitmain_soc_init: opt_bitmain_work_mode = 0

    2020-11-21 15:01:42 driver-btm-api.c:2454:bitmain_soc_init: Miner compile time: Tue Jun  2 10:31:07 CST 2020 type: Antminer S17+

    2020-11-21 15:01:42 driver-btm-api.c:2455:bitmain_soc_init: commit version: 1ca50a5 2020-06-01 18:51:22, build by: lol 2020-06-02 10:37:21

    2020-11-21 15:01:42 driver-btm-api.c:2083:show_sn: len:16, 8148c5064e104814

    2020-11-21 15:01:42 driver-btm-api.c:2461:bitmain_soc_init: show sn return 1

    2020-11-21 15:01:42 driver-btm-api.c:2103:handle_sn_for_factory_mode: show sn return 1

    2020-11-21 15:01:42 driver-btm-api.c:2141:handle_sn_for_factory_mode: read sn success, 8148c5064e104814

    2020-11-21 15:01:42 fan.c:284:front_fan_power_on: Note: front fan is power on!

    2020-11-21 15:01:42 fan.c:296:rear_fan_power_on: Note: rear fan is power on!

    2020-11-21 15:01:42 driver-btm-api.c:1314:miner_device_init: Detect 256MB control board of XILINX

    2020-11-21 15:01:42 driver-btm-api.c:1255:init_fan_parameter: fan_eft : 0  fan_pwm : 0

    2020-11-21 15:01:48 driver-btm-api.c:1239:init_miner_version: miner ID : 8148c5064e104814

    2020-11-21 15:01:48 driver-btm-api.c:1245:init_miner_version: FPGA Version = 0xB023

    2020-11-21 15:01:54 driver-btm-api.c:837:get_product_id: product_id[0] = 0

    2020-11-21 15:01:54 driver-btm-api.c:837:get_product_id: product_id[1] = 0

    2020-11-21 15:01:54 driver-btm-api.c:837:get_product_id: product_id[2] = 0

    2020-11-21 15:01:54 driver-btm-api.c:2234:update_conf_by_power_feedback: Power feedback is disabled

    2020-11-21 15:01:54 driver-btm-api.c:2202:get_calibration_voltage: calibration voltage flag is error data.

    2020-11-21 15:01:54 driver-btm-api.c:2268:update_conf_by_power_feedback: Note: no calibration voltage, default diff = 0

    2020-11-21 15:01:54 frequency.c:1457:adjust_higer_max_vol_table: adjust_higer_max_vol_table, adjust_vol = 0

    2020-11-21 15:01:54 thread.c:1363:create_read_nonce_reg_thread: create thread

    2020-11-21 15:02:00 driver-btm-api.c:1239:init_miner_version: miner ID : 8148c5064e104814

    2020-11-21 15:02:00 driver-btm-api.c:1245:init_miner_version: FPGA Version = 0xB023

    0
    Comment actions Permalink

    Hello,

    My miner stopped working.

    Steps I've already taken but without success:

    1- Download and reload the firmware -> done but didn't solve

    2- Check your mining pool URLs and settings very carefully -> well configured

    3- Confirm that your internet and network is stable -> good internet

    4- Check the voltage on the front and rear fans -> all working

    5- Reset the miner -> done but didn't solve

     

     

    Booting Linux on physical CPU 0x0
    Linux version 4.6.0-xilinx-gff8137b-dirty (lzq@armdev2) (gcc version 4.8.3 20140320 (prerelease) (Sourcery CodeBench Lite 2014.05-23) ) #25 SMP PREEMPT Fri Nov 23 15:30:52 CST 2018
    CPU: ARMv7 Processor [413fc090] revision 0 (ARMv7), cr=18c5387d
    CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
    Machine model: Xilinx Zynq
    cma: Reserved 16 MiB at 0x0e000000
    Memory policy: Data cache writealloc
    On node 0 totalpages: 61440
    free_area_init_node: node 0, pgdat c0b39280, node_mem_map cde10000
    Normal zone: 480 pages used for memmap
    Normal zone: 0 pages reserved
    Normal zone: 61440 pages, LIFO batch:15
    percpu: Embedded 12 pages/cpu @cddf1000 s19776 r8192 d21184 u49152
    pcpu-alloc: s19776 r8192 d21184 u49152 alloc=12*4096
    pcpu-alloc: [0] 0 [0] 1
    Built 1 zonelists in Zone order, mobility grouping on. Total pages: 60960
    Kernel command line: mem=240M console=ttyPS0,115200 ramdisk_size=33554432 root=/dev/ram rw earlyprintk
    PID hash table entries: 1024 (order: 0, 4096 bytes)
    Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
    Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
    Memory: 203432K/245760K available (6345K kernel code, 231K rwdata, 1896K rodata, 1024K init, 223K bss, 25944K reserved, 16384K cma-reserved, 0K highmem)
    Virtual kernel memory layout:
    vector : 0xffff0000 - 0xffff1000 ( 4 kB)
    fixmap : 0xffc00000 - 0xfff00000 (3072 kB)
    vmalloc : 0xcf800000 - 0xff800000 ( 768 MB)
    lowmem : 0xc0000000 - 0xcf000000 ( 240 MB)
    pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
    modules : 0xbf000000 - 0xbfe00000 ( 14 MB)
    .text : 0xc0008000 - 0xc090c424 (9234 kB)
    .init : 0xc0a00000 - 0xc0b00000 (1024 kB)
    .data : 0xc0b00000 - 0xc0b39fe0 ( 232 kB)
    .bss : 0xc0b39fe0 - 0xc0b71c28 ( 224 kB)
    Preemptible hierarchical RCU implementation.
    Build-time adjustment of leaf fanout to 32.
    RCU restricting CPUs from NR_CPUS=4 to nr_cpu_ids=2.
    RCU: Adjusting geometry for rcu_fanout_leaf=32, nr_cpu_ids=2
    NR_IRQS:16 nr_irqs:16 16
    efuse mapped to cf800000
    ps7-slcr mapped to cf802000
    L2C: platform modifies aux control register: 0x72360000 -> 0x72760000
    L2C: DT/platform modifies aux control register: 0x72360000 -> 0x72760000
    L2C-310 erratum 769419 enabled
    L2C-310 enabling early BRESP for Cortex-A9
    L2C-310 full line of zeros enabled for Cortex-A9
    L2C-310 ID prefetch enabled, offset 1 lines
    L2C-310 dynamic clock gating enabled, standby mode enabled
    L2C-310 cache controller enabled, 8 ways, 512 kB
    L2C-310: CACHE_ID 0x410000c8, AUX_CTRL 0x76760001
    zynq_clock_init: clkc starts at cf802100
    Zynq clock init
    sched_clock: 64 bits at 333MHz, resolution 3ns, wraps every 4398046511103ns
    clocksource: arm_global_timer: mask: 0xffffffffffffffff max_cycles: 0x4ce07af025, max_idle_ns: 440795209040 ns
    Switching to timer-based delay loop, resolution 3ns
    clocksource: ttc_clocksource: mask: 0xffff max_cycles: 0xffff, max_idle_ns: 537538477 ns
    ps7-ttc #0 at cf80a000, irq=18
    Console: colour dummy device 80x30
    Calibrating delay loop (skipped), value calculated using timer frequency.. 666.66 BogoMIPS (lpj=3333333)
    pid_max: default: 32768 minimum: 301
    Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
    Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
    CPU: Testing write buffer coherency: ok
    CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
    Setting up static identity map for 0x100000 - 0x100058
    CPU1: failed to boot: -1
    Brought up 1 CPUs
    SMP: Total of 1 processors activated (666.66 BogoMIPS).
    CPU: All CPU(s) started in SVC mode.
    devtmpfs: initialized
    VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 4
    clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
    pinctrl core: initialized pinctrl subsystem
    NET: Registered protocol family 16
    DMA: preallocated 256 KiB pool for atomic coherent allocations
    cpuidle: using governor menu
    hw-breakpoint: found 5 (+1 reserved) breakpoint and 1 watchpoint registers.
    hw-breakpoint: maximum watchpoint size is 4 bytes.
    zynq-ocm f800c000.ps7-ocmc: ZYNQ OCM pool: 256 KiB @ 0xcf880000
    vgaarb: loaded
    SCSI subsystem initialized
    usbcore: registered new interface driver usbfs
    usbcore: registered new interface driver hub
    usbcore: registered new device driver usb
    media: Linux media interface: v0.10
    Linux video capture interface: v2.00
    pps_core: LinuxPPS API ver. 1 registered
    pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
    PTP clock support registered
    EDAC MC: Ver: 3.0.0
    Advanced Linux Sound Architecture Driver Initialized.
    clocksource: Switched to clocksource arm_global_timer
    NET: Registered protocol family 2
    TCP established hash table entries: 2048 (order: 1, 8192 bytes)
    TCP bind hash table entries: 2048 (order: 2, 16384 bytes)
    TCP: Hash tables configured (established 2048 bind 2048)
    UDP hash table entries: 256 (order: 1, 8192 bytes)
    UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
    NET: Registered protocol family 1
    RPC: Registered named UNIX socket transport module.
    RPC: Registered udp transport module.
    RPC: Registered tcp transport module.
    RPC: Registered tcp NFSv4.1 backchannel transport module.
    PCI: CLS 0 bytes, default 64
    Trying to unpack rootfs image as initramfs...
    rootfs image is not initramfs (no cpio magic); looks like an initrd
    Freeing initrd memory: 12904K (cce67000 - cdb01000)
    hw perfevents: enabled with armv7_cortex_a9 PMU driver, 7 counters available
    futex hash table entries: 512 (order: 3, 32768 bytes)
    workingset: timestamp_bits=28 max_order=16 bucket_order=0
    jffs2: version 2.2. (NAND) (SUMMARY) © 2001-2006 Red Hat, Inc.
    io scheduler noop registered
    io scheduler deadline registered
    io scheduler cfq registered (default)
    dma-pl330 f8003000.ps7-dma: Loaded driver for PL330 DMAC-241330
    dma-pl330 f8003000.ps7-dma: DBUFF-128x8bytes Num_Chans-8 Num_Peri-4 Num_Events-16
    e0000000.serial: ttyPS0 at MMIO 0xe0000000 (irq = 158, base_baud = 6249999) is a xuartps
    console [ttyPS0] enabled
    xdevcfg f8007000.ps7-dev-cfg: ioremap 0xf8007000 to cf86e000
    [drm] Initialized drm 1.1.0 20060810
    brd: module loaded
    loop: module loaded
    CAN device driver interface
    gpiod_set_value: invalid GPIO
    libphy: MACB_mii_bus: probed
    macb e000b000.ethernet eth0: Cadence GEM rev 0x00020118 at 0xe000b000 irq 31 (00:0a:35:00:00:00)
    Generic PHY e000b000.etherne:00: attached PHY driver [Generic PHY] (mii_bus:phy_addr=e000b000.etherne:00, irq=-1)
    e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k
    e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
    ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
    ehci-pci: EHCI PCI platform driver
    usbcore: registered new interface driver usb-storage
    mousedev: PS/2 mouse device common for all mice
    i2c /dev entries driver
    Xilinx Zynq CpuIdle Driver started
    sdhci: Secure Digital Host Controller Interface driver
    sdhci: Copyright(c) Pierre Ossman
    sdhci-pltfm: SDHCI platform and OF driver helper
    mmc0: SDHCI controller on e0100000.ps7-sdio [e0100000.ps7-sdio] using ADMA
    ledtrig-cpu: registered to indicate activity on CPUs
    usbcore: registered new interface driver usbhid
    usbhid: USB HID core driver
    nand: device found, Manufacturer ID: 0x2c, Chip ID: 0xda
    nand: Micron MT29F2G08ABAEAWP
    nand: 256 MiB, SLC, erase size: 128 KiB, page size: 2048, OOB size: 64
    nand: WARNING: pl35x-nand: the ECC used on your system is too weak compared to the one required by the NAND chip
    Bad block table found at page 131008, version 0x01
    Bad block table found at page 130944, version 0x01
    6 ofpart partitions found on MTD device pl35x-nand
    Creating 6 MTD partitions on "pl35x-nand":
    0x000000000000-0x000002800000 : "BOOT.bin-env-dts-kernel"
    0x000002800000-0x000004800000 : "ramfs"
    0x000004800000-0x000005000000 : "configs"
    0x000005000000-0x000006000000 : "reserve"
    0x000006000000-0x000008000000 : "ramfs-bak"
    0x000008000000-0x000010000000 : "reserve1"
    NET: Registered protocol family 10
    sit: IPv6 over IPv4 tunneling driver
    NET: Registered protocol family 17
    can: controller area network core (rev 20120528 abi 9)
    NET: Registered protocol family 29
    can: raw protocol (rev 20120528)
    can: broadcast manager protocol (rev 20120528 t)
    can: netlink gateway (rev 20130117) max_hops=1
    zynq_pm_ioremap: no compatible node found for 'xlnx,zynq-ddrc-a05'
    zynq_pm_late_init: Unable to map DDRC IO memory.
    Registering SWP/SWPB emulation handler
    hctosys: unable to open rtc device (rtc0)
    ALSA device list:
    No soundcards found.
    RAMDISK: gzip image found at block 0
    EXT4-fs (ram0): couldn't mount as ext3 due to feature incompatibilities
    EXT4-fs (ram0): mounted filesystem without journal. Opts: (null)
    VFS: Mounted root (ext4 filesystem) on device 1:0.
    devtmpfs: mounted
    Freeing unused kernel memory: 1024K (c0a00000 - c0b00000)
    EXT4-fs (ram0): re-mounted. Opts: block_validity,delalloc,barrier,user_xattr
    random: dd urandom read with 0 bits of entropy available
    ubi0: attaching mtd2
    ubi0: scanning is finished
    ubi0: attached mtd2 (name "configs", size 8 MiB)
    ubi0: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes
    ubi0: min./max. I/O unit sizes: 2048/2048, sub-page size 2048
    ubi0: VID header offset: 2048 (aligned 2048), data offset: 4096
    ubi0: good PEBs: 64, bad PEBs: 0, corrupted PEBs: 0
    ubi0: user volume: 1, internal volumes: 1, max. volumes count: 128
    ubi0: max/mean erase counter: 13/4, WL threshold: 4096, image sequence number: 262741923
    ubi0: available PEBs: 0, total reserved PEBs: 64, PEBs reserved for bad PEB handling: 40
    ubi0: background thread "ubi_bgt0d" started, PID 708
    UBIFS (ubi0:0): background thread "ubifs_bgt0_0" started, PID 711
    UBIFS (ubi0:0): recovery needed
    UBIFS (ubi0:0): recovery completed
    UBIFS (ubi0:0): UBIFS: mounted UBI device 0, volume 0, name "configs"
    UBIFS (ubi0:0): LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
    UBIFS (ubi0:0): FS size: 1396736 bytes (1 MiB, 11 LEBs), journal size 888833 bytes (0 MiB, 5 LEBs)
    UBIFS (ubi0:0): reserved for root: 65970 bytes (64 KiB)
    UBIFS (ubi0:0): media format: w4/r0 (latest is w4/r0), UUID A9E8BDA4-70DE-45D9-83BE-2DD9F129C0C6, small LPT model
    ubi1: attaching mtd5
    ubi1: scanning is finished
    ubi1: attached mtd5 (name "reserve1", size 128 MiB)
    ubi1: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes
    ubi1: min./max. I/O unit sizes: 2048/2048, sub-page size 2048
    ubi1: VID header offset: 2048 (aligned 2048), data offset: 4096
    ubi1: good PEBs: 1020, bad PEBs: 4, corrupted PEBs: 0
    ubi1: user volume: 1, internal volumes: 1, max. volumes count: 128
    ubi1: max/mean erase counter: 494/181, WL threshold: 4096, image sequence number: 3563076859
    ubi1: available PEBs: 0, total reserved PEBs: 1020, PEBs reserved for bad PEB handling: 36
    ubi1: background thread "ubi_bgt1d" started, PID 720
    UBIFS (ubi1:0): background thread "ubifs_bgt1_0" started, PID 723
    UBIFS (ubi1:0): recovery needed
    UBIFS (ubi1:0): recovery completed
    UBIFS (ubi1:0): UBIFS: mounted UBI device 1, volume 0, name "reserve1"
    UBIFS (ubi1:0): LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
    UBIFS (ubi1:0): FS size: 123039744 bytes (117 MiB, 969 LEBs), journal size 6221824 bytes (5 MiB, 49 LEBs)
    UBIFS (ubi1:0): reserved for root: 4952683 bytes (4836 KiB)
    UBIFS (ubi1:0): media format: w4/r0 (latest is w4/r0), UUID A21581E4-693A-4BBF-A66A-FCE5ACD2EF7F, small LPT model
    IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
    IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
    macb e000b000.ethernet eth0: unable to generate target frequency: 25000000 Hz
    macb e000b000.ethernet eth0: link up (100/Full)
    IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
    In axi fpga driver!
    request_mem_region OK!
    AXI fpga dev virtual address is 0xcfb38000
    *base_vir_addr = 0xb023
    In fpga mem driver!
    request_mem_region OK!
    fpga mem virtual address is 0xd2000000
    random: nonblocking pool is initialized
    2020-12-05 10:42:37 driver-btm-api.c:779:init_freq_mode: This is scan-user version
    2020-12-05 10:42:37 driver-btm-api.c:2451:bitmain_soc_init: opt_multi_version = 1
    2020-12-05 10:42:37 driver-btm-api.c:2452:bitmain_soc_init: opt_bitmain_ab = 1
    2020-12-05 10:42:37 driver-btm-api.c:2453:bitmain_soc_init: opt_bitmain_work_mode = 0
    2020-12-05 10:42:37 driver-btm-api.c:2454:bitmain_soc_init: Miner compile time: Tue Jun 2 10:31:07 CST 2020 type: Antminer S17+
    2020-12-05 10:42:37 driver-btm-api.c:2455:bitmain_soc_init: commit version: 1ca50a5 2020-06-01 18:51:22, build by: lol 2020-06-02 10:37:21
    2020-12-05 10:42:37 driver-btm-api.c:2083:show_sn: len:16, 80624c442b10481c
    2020-12-05 10:42:37 driver-btm-api.c:2461:bitmain_soc_init: show sn return 1
    2020-12-05 10:42:37 driver-btm-api.c:2103:handle_sn_for_factory_mode: show sn return 1
    2020-12-05 10:42:37 driver-btm-api.c:2141:handle_sn_for_factory_mode: read sn success, 80624c442b10481c
    2020-12-05 10:42:37 fan.c:284:front_fan_power_on: Note: front fan is power on!
    2020-12-05 10:42:37 fan.c:296:rear_fan_power_on: Note: rear fan is power on!
    2020-12-05 10:42:37 driver-btm-api.c:1314:miner_device_init: Detect 256MB control board of XILINX
    2020-12-05 10:42:37 driver-btm-api.c:1255:init_fan_parameter: fan_eft : 0 fan_pwm : 0
    2020-12-05 10:42:43 driver-btm-api.c:1239:init_miner_version: miner ID : 80624c442b10481c
    2020-12-05 10:42:43 driver-btm-api.c:1245:init_miner_version: FPGA Version = 0xB023
    2020-12-05 10:42:49 driver-btm-api.c:837:get_product_id: product_id[0] = 0
    2020-12-05 10:42:49 driver-btm-api.c:837:get_product_id: product_id[1] = 0
    2020-12-05 10:42:49 driver-btm-api.c:837:get_product_id: product_id[3] = 0
    2020-12-05 10:42:49 driver-btm-api.c:2234:update_conf_by_power_feedback: Power feedback is disabled
    2020-12-05 10:42:49 driver-btm-api.c:2202:get_calibration_voltage: calibration voltage flag is error data.
    2020-12-05 10:42:49 driver-btm-api.c:2268:update_conf_by_power_feedback: Note: no calibration voltage, default diff = 0
    2020-12-05 10:42:49 frequency.c:1457:adjust_higer_max_vol_table: adjust_higer_max_vol_table, adjust_vol = 0
    2020-12-05 10:42:49 thread.c:1363:create_read_nonce_reg_thread: create thread
    2020-12-05 10:42:55 driver-btm-api.c:1239:init_miner_version: miner ID : 80624c442b10481c
    2020-12-05 10:42:55 driver-btm-api.c:1245:init_miner_version: FPGA Version = 0xB023
    2020-12-05 10:43:00 driver-btm-api.c:837:get_product_id: product_id[0] = 0
    2020-12-05 10:43:00 driver-btm-api.c:837:get_product_id: product_id[1] = 0
    2020-12-05 10:43:00 driver-btm-api.c:837:get_product_id: product_id[3] = 0
    2020-12-05 10:43:00 driver-btm-api.c:792:_set_project_type: project:0
    2020-12-05 10:43:00 driver-btm-api.c:813:_set_project_type: Project type: Antminer S17+
    2020-12-05 10:43:00 driver-btm-api.c:824:dump_pcb_bom_version: Chain [0] PCB Version: 0x0100
    2020-12-05 10:43:00 driver-btm-api.c:825:dump_pcb_bom_version: Chain [0] BOM Version: 0x0100
    2020-12-05 10:43:00 driver-btm-api.c:824:dump_pcb_bom_version: Chain [1] PCB Version: 0x0100
    2020-12-05 10:43:00 driver-btm-api.c:825:dump_pcb_bom_version: Chain [1] BOM Version: 0x0100
    2020-12-05 10:43:00 driver-btm-api.c:824:dump_pcb_bom_version: Chain [3] PCB Version: 0x0100
    2020-12-05 10:43:00 driver-btm-api.c:825:dump_pcb_bom_version: Chain [3] BOM Version: 0x0100
    2020-12-05 10:43:00 driver-btm-api.c:2372:bitmain_board_init: Fan check passed.
    2020-12-05 10:43:01 board.c:36:jump_and_app_check_restore_pic: chain[0] PIC jump to app
    2020-12-05 10:43:03 board.c:40:jump_and_app_check_restore_pic: Check chain[0] PIC fw version=0x88
    2020-12-05 10:43:04 board.c:36:jump_and_app_check_restore_pic: chain[1] PIC jump to app
    2020-12-05 10:43:07 board.c:40:jump_and_app_check_restore_pic: Check chain[1] PIC fw version=0x88
    2020-12-05 10:43:08 board.c:36:jump_and_app_check_restore_pic: chain[3] PIC jump to app
    2020-12-05 10:43:10 board.c:40:jump_and_app_check_restore_pic: Check chain[3] PIC fw version=0x88
    2020-12-05 10:43:10 thread.c:1358:create_pic_heart_beat_thread: create thread
    2020-12-05 10:43:10 power_api.c:213:power_init: Power init:
    2020-12-05 10:43:10 power_api.c:214:power_init: current_voltage_raw = 0
    2020-12-05 10:43:10 power_api.c:215:power_init: highest_voltage_raw = 2100
    2020-12-05 10:43:10 power_api.c:216:power_init: working_voltage_raw = 1950
    2020-12-05 10:43:10 power_api.c:217:power_init: higher_voltage_raw = 2040
    2020-12-05 10:43:10 power_api.c:218:power_init: check_asic_voltage_raw = 2100
    2020-12-05 10:43:10 driver-btm-api.c:2382:bitmain_board_init: Enter 30s sleep to make sure power release finish.
    2020-12-05 10:43:42 power_api.c:324:set_to_highest_voltage_by_steps: Set to voltage raw 2100, step by step.
    2020-12-05 10:44:07 power_api.c:85:check_voltage_multi: retry time: 0
    2020-12-05 10:44:08 power_api.c:40:_get_avg_voltage: chain = 0, voltage = 20.958015
    2020-12-05 10:44:10 power_api.c:40:_get_avg_voltage: chain = 1, voltage = 20.960510
    2020-12-05 10:44:11 power_api.c:40:_get_avg_voltage: chain = 3, voltage = 21.006361
    2020-12-05 10:44:11 power_api.c:53:_get_avg_voltage: average_voltage = 20.974962
    2020-12-05 10:44:11 power_api.c:71:check_voltage: target_vol = 21.00, actural_vol = 20.97, check voltage passed.
    2020-12-05 10:44:11 uart.c:72:set_baud: set fpga_baud to 115200
    2020-12-05 10:44:22 driver-btm-api.c:1134:check_asic_number_with_power_on: Chain[0]: find 65 asic, times 0
    2020-12-05 10:44:33 driver-btm-api.c:1134:check_asic_number_with_power_on: Chain[1]: find 8 asic, times 0
    2020-12-05 10:44:44 driver-btm-api.c:1134:check_asic_number_with_power_on: Chain[1]: find 8 asic, times 1
    2020-12-05 10:44:55 driver-btm-api.c:1134:check_asic_number_with_power_on: Chain[1]: find 8 asic, times 2
    2020-12-05 10:44:55 power_api.c:380:modify_check_asic_voltage: check_asic_voltage_raw = 2100
    chain 1, IO_DRIVE_STRENGTH_CONFIGURATION reg = 0x f1fffff
    2020-12-05 10:45:04 driver-btm-api.c:1157:check_asic_number_with_power_on: Chain[1]: find 8 asic, times 3
    2020-12-05 10:45:04 power_api.c:380:modify_check_asic_voltage: check_asic_voltage_raw = 2050
    2020-12-05 10:45:04 power_api.c:364:set_to_check_asic_voltage_by_steps: Set to voltage raw 2050, step by step.
    2020-12-05 10:45:07 power_api.c:85:check_voltage_multi: retry time: 0
    2020-12-05 10:45:09 power_api.c:40:_get_avg_voltage: chain = 0, voltage = 20.424397
    2020-12-05 10:45:10 power_api.c:40:_get_avg_voltage: chain = 1, voltage = 20.428026
    2020-12-05 10:45:11 power_api.c:40:_get_avg_voltage: chain = 3, voltage = 20.498727
    2020-12-05 10:45:11 power_api.c:53:_get_avg_voltage: average_voltage = 20.450383
    2020-12-05 10:45:11 power_api.c:71:check_voltage: target_vol = 20.50, actural_vol = 20.45, check voltage passed.
    chain 1, IO_DRIVE_STRENGTH_CONFIGURATION reg = 0x f1fffff
    2020-12-05 10:45:20 driver-btm-api.c:1157:check_asic_number_with_power_on: Chain[1]: find 8 asic, times 4
    2020-12-05 10:45:20 power_api.c:380:modify_check_asic_voltage: check_asic_voltage_raw = 2000
    2020-12-05 10:45:20 power_api.c:364:set_to_check_asic_voltage_by_steps: Set to voltage raw 2000, step by step.
    2020-12-05 10:45:24 power_api.c:85:check_voltage_multi: retry time: 0
    2020-12-05 10:45:25 power_api.c:40:_get_avg_voltage: chain = 0, voltage = 19.917408
    2020-12-05 10:45:27 power_api.c:40:_get_avg_voltage: chain = 1, voltage = 19.943950
    2020-12-05 10:45:28 power_api.c:40:_get_avg_voltage: chain = 3, voltage = 19.991094
    2020-12-05 10:45:28 power_api.c:53:_get_avg_voltage: average_voltage = 19.950817
    2020-12-05 10:45:28 power_api.c:71:check_voltage: target_vol = 20.00, actural_vol = 19.95, check voltage passed.
    chain 1, IO_DRIVE_STRENGTH_CONFIGURATION reg = 0x f1fffff
    2020-12-05 10:45:37 driver-btm-api.c:1157:check_asic_number_with_power_on: Chain[1]: find 8 asic, times 5
    2020-12-05 10:45:37 power_api.c:380:modify_check_asic_voltage: check_asic_voltage_raw = 2100
    2020-12-05 10:45:37 power_api.c:364:set_to_check_asic_voltage_by_steps: Set to voltage raw 2100, step by step.
    2020-12-05 10:45:42 power_api.c:85:check_voltage_multi: retry time: 0
    2020-12-05 10:45:43 power_api.c:40:_get_avg_voltage: chain = 0, voltage = 20.933842
    2020-12-05 10:45:44 power_api.c:40:_get_avg_voltage: chain = 1, voltage = 20.936306
    2020-12-05 10:45:45 power_api.c:40:_get_avg_voltage: chain = 3, voltage = 21.006361
    2020-12-05 10:45:45 power_api.c:53:_get_avg_voltage: average_voltage = 20.958836
    2020-12-05 10:45:45 power_api.c:71:check_voltage: target_vol = 21.00, actural_vol = 20.96, check voltage passed.
    2020-12-05 10:45:45 driver-btm-api.c:1193:check_asic_number: Chain 1 only find 8 asic, will power off hash board 1
    2020-12-05 10:45:47 driver-btm-api.c:1195:check_asic_number: Chain 1 voltage: an0 = 2.787097, an2 2.790323, an6 2.532258.
    2020-12-05 10:45:58 driver-btm-api.c:1134:check_asic_number_with_power_on: Chain[3]: find 0 asic, times 0
    2020-12-05 10:46:10 driver-btm-api.c:1134:check_asic_number_with_power_on: Chain[3]: find 0 asic, times 1
    2020-12-05 10:46:21 driver-btm-api.c:1134:check_asic_number_with_power_on: Chain[3]: find 0 asic, times 2
    2020-12-05 10:46:21 power_api.c:380:modify_check_asic_voltage: check_asic_voltage_raw = 2100
    chain 3, IO_DRIVE_STRENGTH_CONFIGURATION reg = 0x f1fffff
    2020-12-05 10:46:29 driver-btm-api.c:1157:check_asic_number_with_power_on: Chain[3]: find 0 asic, times 3
    2020-12-05 10:46:29 power_api.c:380:modify_check_asic_voltage: check_asic_voltage_raw = 2050
    2020-12-05 10:46:29 power_api.c:364:set_to_check_asic_voltage_by_steps: Set to voltage raw 2050, step by step.
    2020-12-05 10:46:33 power_api.c:85:check_voltage_multi: retry time: 0
    2020-12-05 10:46:34 power_api.c:40:_get_avg_voltage: chain = 0, voltage = 20.424397
    2020-12-05 10:46:35 power_api.c:40:_get_avg_voltage: chain = 3, voltage = 20.472681
    2020-12-05 10:46:35 power_api.c:53:_get_avg_voltage: average_voltage = 20.448539
    2020-12-05 10:46:35 power_api.c:71:check_voltage: target_vol = 20.50, actural_vol = 20.45, check voltage passed.
    chain 3, IO_DRIVE_STRENGTH_CONFIGURATION reg = 0x f1fffff
    2020-12-05 10:46:44 driver-btm-api.c:1157:check_asic_number_with_power_on: Chain[3]: find 0 asic, times 4
    2020-12-05 10:46:44 power_api.c:380:modify_check_asic_voltage: check_asic_voltage_raw = 2000
    2020-12-05 10:46:44 power_api.c:364:set_to_check_asic_voltage_by_steps: Set to voltage raw 2000, step by step.
    2020-12-05 10:46:47 power_api.c:85:check_voltage_multi: retry time: 0
    2020-12-05 10:46:48 power_api.c:40:_get_avg_voltage: chain = 0, voltage = 19.917408
    2020-12-05 10:46:50 power_api.c:40:_get_avg_voltage: chain = 3, voltage = 19.965693
    2020-12-05 10:46:50 power_api.c:53:_get_avg_voltage: average_voltage = 19.941551
    2020-12-05 10:46:50 power_api.c:71:check_voltage: target_vol = 20.00, actural_vol = 19.94, check voltage passed.
    chain 3, IO_DRIVE_STRENGTH_CONFIGURATION reg = 0x f1fffff
    2020-12-05 10:46:58 driver-btm-api.c:1157:check_asic_number_with_power_on: Chain[3]: find 0 asic, times 5
    2020-12-05 10:46:58 power_api.c:380:modify_check_asic_voltage: check_asic_voltage_raw = 2100
    2020-12-05 10:46:58 power_api.c:364:set_to_check_asic_voltage_by_steps: Set to voltage raw 2100, step by step.
    2020-12-05 10:47:03 power_api.c:85:check_voltage_multi: retry time: 0
    2020-12-05 10:47:05 power_api.c:40:_get_avg_voltage: chain = 0, voltage = 20.907243
    2020-12-05 10:47:06 power_api.c:40:_get_avg_voltage: chain = 3, voltage = 20.979670
    2020-12-05 10:47:06 power_api.c:53:_get_avg_voltage: average_voltage = 20.943457
    2020-12-05 10:47:06 power_api.c:71:check_voltage: target_vol = 21.00, actural_vol = 20.94, check voltage passed.
    2020-12-05 10:47:06 driver-btm-api.c:1193:check_asic_number: Chain 3 only find 0 asic, will power off hash board 3
    2020-12-05 10:47:07 driver-btm-api.c:1195:check_asic_number: Chain 3 voltage: an0 = 2.816129, an2 2.803226, an6 2.538710.
    2020-12-05 10:47:11 driver-hash-chip.c:266:set_uart_relay: set uart relay to 0x330003
    2020-12-05 10:47:11 driver-btm-api.c:435:set_order_clock: chain[0]: set order clock, stragegy 3
    2020-12-05 10:47:11 driver-hash-chip.c:502:set_clock_delay_control: core_data = 0x34
    2020-12-05 10:47:11 driver-btm-api.c:1892:check_clock_counter: freq 50 clock_counter_limit 6
    2020-12-05 10:47:12 voltage[0] = 1940
    2020-12-05 10:47:12 power_api.c:226:set_working_voltage_raw: working_voltage_raw = 1940
    2020-12-05 10:47:13 temperature.c:340:calibrate_temp_sensor_one_chain: chain 0 temp sensor NCT218
    2020-12-05 10:47:13 uart.c:72:set_baud: set fpga_baud to 12000000
    2020-12-05 10:47:13 driver-btm-api.c:293:check_bringup_temp: Bring up temperature is 21
    2020-12-05 10:47:13 thread.c:1378:create_check_miner_status_thread: create thread
    2020-12-05 10:47:13 thread.c:1368:create_show_miner_status_thread: create thread
    2020-12-05 10:47:13 thread.c:1348:create_temperature_monitor_thread: create thread
    2020-12-05 10:47:13 frequency.c:514:check_bringup_temp_dec_freq: dec freq = 0 when bringup temp = 21 dec_freq_index=0
    2020-12-05 10:47:13 freq_tuning.c:183:freq_tuning_get_max_freq: Max freq of tuning is 650
    2020-12-05 10:47:13 driver-btm-api.c:1765:send_null_work: [DEBUG] Send null work.
    2020-12-05 10:47:13 thread.c:1338:create_asic_status_monitor_thread: create thread
    2020-12-05 10:47:13 frequency.c:1110:inc_freq_with_fixed_vco: chain = 255, freq = 535, is_higher_voltage = true
    2020-12-05 10:49:38 power_api.c:352:set_to_voltage_by_steps: Set to voltage raw 2090, step by step.
    2020-12-05 10:49:40 power_api.c:85:check_voltage_multi: retry time: 0
    2020-12-05 10:49:41 power_api.c:40:_get_avg_voltage: chain = 0, voltage = 20.786532
    2020-12-05 10:49:41 power_api.c:53:_get_avg_voltage: average_voltage = 20.786532
    2020-12-05 10:49:41 power_api.c:71:check_voltage: target_vol = 20.90, actural_vol = 20.79, check voltage passed.
    2020-12-05 10:51:35 thread.c:1273:asic_status_monitor_thread: ERROR: chain 0 get hashrate_reg_counter 61, require 65, failed times 1: ooooo ooooo ooooo ooooo ooooo ooooo ooooo ooooo ooooo ooooo ooooo ooooo oxxxx
    2020-12-05 10:51:36 thread.c:1293:asic_status_monitor_thread: chain 0 can't get enough hashrate reg val for 0 times.
    2020-12-05 10:51:37 thread.c:1273:asic_status_monitor_thread: ERROR: chain 0 get hashrate_reg_counter 61, require 65, failed times 1: ooooo ooooo ooooo ooooo ooooo ooooo ooooo ooooo ooooo ooooo ooooo ooooo oxxxx
    2020-12-05 10:51:38 thread.c:1293:asic_status_monitor_thread: chain 0 can't get enough hashrate reg val for 1 times.
    2020-12-05 10:51:39 thread.c:1273:asic_status_monitor_thread: ERROR: chain 0 get hashrate_reg_counter 61, require 65, failed times 1: ooooo ooooo ooooo ooooo ooooo ooooo ooooo ooooo ooooo ooooo ooooo ooooo oxxxx
    2020-12-05 10:51:40 thread.c:1293:asic_status_monitor_thread: chain 0 can't get enough hashrate reg val for 2 times.
    2020-12-05 10:51:41 thread.c:1273:asic_status_monitor_thread: ERROR: chain 0 get hashrate_reg_counter 61, require 65, failed times 1: ooooo ooooo ooooo ooooo ooooo ooooo ooooo ooooo ooooo ooooo ooooo ooooo oxxxx
    2020-12-05 10:51:42 thread.c:1293:asic_status_monitor_thread: chain 0 can't get enough hashrate reg val for 3 times.
    2020-12-05 10:51:43 thread.c:1273:asic_status_monitor_thread: ERROR: chain 0 get hashrate_reg_counter 61, require 65, failed times 1: ooooo ooooo ooooo ooooo ooooo ooooo ooooo ooooo ooooo ooooo ooooo ooooo oxxxx
    2020-12-05 10:51:44 thread.c:1293:asic_status_monitor_thread: chain 0 can't get enough hashrate reg val for 4 times.
    2020-12-05 10:51:44 thread.c:1297:asic_status_monitor_thread: chain 0 can't get enough hashrate reg val for 5 times, power off.
    2020-12-05 10:51:45 driver-btm-api.c:222:set_miner_status: ERROR_ASIC_LOSS
    2020-12-05 10:51:45 driver-btm-api.c:156:stop_mining: stop mining: all chains meet asic loss.
    2020-12-05 10:51:45 thread.c:1419:cancel_check_miner_status_thread: cancel thread
    2020-12-05 10:51:45 thread.c:1388:cancel_temperature_monitor_thread: cancel thread
    2020-12-05 10:51:45 thread.c:1403:cancel_read_nonce_reg_thread: cancel thread
    2020-12-05 10:51:45 driver-btm-api.c:141:killall_hashboard: ****power off hashboard****
    2020-12-05 10:52:23 power_api.c:352:set_to_voltage_by_steps: Set to voltage raw 2080, step by step.
    2020-12-05 10:52:24 power_api.c:85:check_voltage_multi: retry time: 0
    2020-12-05 10:52:24 power_api.c:46:_get_avg_voltage: No chain exist.
    2020-12-05 10:52:24 power_api.c:53:_get_avg_voltage: average_voltage = 0.000000
    2020-12-05 10:52:24 power_api.c:66:check_voltage: target_vol = 20.80, actural_vol = 0.00, more than 1.0v diff.
    2020-12-05 10:52:25 power_api.c:85:check_voltage_multi: retry time: 1
    2020-12-05 10:52:25 power_api.c:46:_get_avg_voltage: No chain exist.
    2020-12-05 10:52:25 power_api.c:53:_get_avg_voltage: average_voltage = 0.000000
    2020-12-05 10:52:25 power_api.c:66:check_voltage: target_vol = 20.80, actural_vol = 0.00, more than 1.0v diff.
    2020-12-05 10:52:26 power_api.c:85:check_voltage_multi: retry time: 2
    2020-12-05 10:52:26 power_api.c:46:_get_avg_voltage: No chain exist.
    2020-12-05 10:52:26 power_api.c:53:_get_avg_voltage: average_voltage = 0.000000
    2020-12-05 10:52:26 power_api.c:66:check_voltage: target_vol = 20.80, actural_vol = 0.00, more than 1.0v diff.
    2020-12-05 10:52:27 power_api.c:85:check_voltage_multi: retry time: 3
    2020-12-05 10:52:27 power_api.c:46:_get_avg_voltage: No chain exist.
    2020-12-05 10:52:27 power_api.c:53:_get_avg_voltage: average_voltage = 0.000000
    2020-12-05 10:52:27 power_api.c:66:check_voltage: target_vol = 20.80, actural_vol = 0.00, more than 1.0v diff.
    2020-12-05 10:52:28 power_api.c:85:check_voltage_multi: retry time: 4
    2020-12-05 10:52:28 power_api.c:46:_get_avg_voltage: No chain exist.
    2020-12-05 10:52:28 power_api.c:53:_get_avg_voltage: average_voltage = 0.000000
    2020-12-05 10:52:28 power_api.c:66:check_voltage: target_vol = 20.80, actural_vol = 0.00, more than 1.0v diff.
    2020-12-05 10:52:29 power_api.c:85:check_voltage_multi: retry time: 5
    2020-12-05 10:52:29 power_api.c:46:_get_avg_voltage: No chain exist.
    2020-12-05 10:52:29 power_api.c:53:_get_avg_voltage: average_voltage = 0.000000
    2020-12-05 10:52:29 power_api.c:66:check_voltage: target_vol = 20.80, actural_vol = 0.00, more than 1.0v diff.
    2020-12-05 10:52:30 power_api.c:85:check_voltage_multi: retry time: 6
    2020-12-05 10:52:30 power_api.c:46:_get_avg_voltage: No chain exist.
    2020-12-05 10:52:30 power_api.c:53:_get_avg_voltage: average_voltage = 0.000000
    2020-12-05 10:52:30 power_api.c:66:check_voltage: target_vol = 20.80, actural_vol = 0.00, more than 1.0v diff.
    2020-12-05 10:52:31 power_api.c:85:check_voltage_multi: retry time: 7
    2020-12-05 10:52:31 power_api.c:46:_get_avg_voltage: No chain exist.
    2020-12-05 10:52:31 power_api.c:53:_get_avg_voltage: average_voltage = 0.000000
    2020-12-05 10:52:31 power_api.c:66:check_voltage: target_vol = 20.80, actural_vol = 0.00, more than 1.0v diff.
    2020-12-05 10:52:32 power_api.c:85:check_voltage_multi: retry time: 8
    2020-12-05 10:52:32 power_api.c:46:_get_avg_voltage: No chain exist.
    2020-12-05 10:52:32 power_api.c:53:_get_avg_voltage: average_voltage = 0.000000
    2020-12-05 10:52:32 power_api.c:66:check_voltage: target_vol = 20.80, actural_vol = 0.00, more than 1.0v diff.
    2020-12-05 10:52:33 power_api.c:85:check_voltage_multi: retry time: 9
    2020-12-05 10:52:33 power_api.c:46:_get_avg_voltage: No chain exist.
    2020-12-05 10:52:33 power_api.c:53:_get_avg_voltage: average_voltage = 0.000000
    2020-12-05 10:52:33 power_api.c:66:check_voltage: target_vol = 20.80, actural_vol = 0.00, more than 1.0v diff.
    2020-12-05 10:52:34 power_api.c:85:check_voltage_multi: retry time: 10
    2020-12-05 10:52:34 power_api.c:46:_get_avg_voltage: No chain exist.
    2020-12-05 10:52:34 power_api.c:53:_get_avg_voltage: average_voltage = 0.000000
    2020-12-05 10:52:34 power_api.c:66:check_voltage: target_vol = 20.80, actural_vol = 0.00, more than 1.0v diff.
    2020-12-05 10:52:35 power_api.c:85:check_voltage_multi: retry time: 11
    2020-12-05 10:52:35 power_api.c:46:_get_avg_voltage: No chain exist.
    2020-12-05 10:52:35 power_api.c:53:_get_avg_voltage: average_voltage = 0.000000
    2020-12-05 10:52:35 power_api.c:66:check_voltage: target_vol = 20.80, actural_vol = 0.00, more than 1.0v diff.
    2020-12-05 10:52:36 power_api.c:85:check_voltage_multi: retry time: 12
    2020-12-05 10:52:36 power_api.c:46:_get_avg_voltage: No chain exist.
    2020-12-05 10:52:36 power_api.c:53:_get_avg_voltage: average_voltage = 0.000000
    2020-12-05 10:52:36 power_api.c:66:check_voltage: target_vol = 20.80, actural_vol = 0.00, more than 1.0v diff.
    2020-12-05 10:52:37 power_api.c:85:check_voltage_multi: retry time: 13
    2020-12-05 10:52:37 power_api.c:46:_get_avg_voltage: No chain exist.
    2020-12-05 10:52:37 power_api.c:53:_get_avg_voltage: average_voltage = 0.000000
    2020-12-05 10:52:37 power_api.c:66:check_voltage: target_vol = 20.80, actural_vol = 0.00, more than 1.0v diff.
    2020-12-05 10:52:38 power_api.c:85:check_voltage_multi: retry time: 14
    2020-12-05 10:52:38 power_api.c:46:_get_avg_voltage: No chain exist.
    2020-12-05 10:52:38 power_api.c:53:_get_avg_voltage: average_voltage = 0.000000
    2020-12-05 10:52:38 power_api.c:66:check_voltage: target_vol = 20.80, actural_vol = 0.00, more than 1.0v diff.
    2020-12-05 10:52:39 power_api.c:85:check_voltage_multi: retry time: 15
    2020-12-05 10:52:39 power_api.c:46:_get_avg_voltage: No chain exist.
    2020-12-05 10:52:39 power_api.c:53:_get_avg_voltage: average_voltage = 0.000000
    2020-12-05 10:52:39 power_api.c:66:check_voltage: target_vol = 20.80, actural_vol = 0.00, more than 1.0v diff.
    2020-12-05 10:52:40 power_api.c:85:check_voltage_multi: retry time: 16
    2020-12-05 10:52:40 power_api.c:46:_get_avg_voltage: No chain exist.
    2020-12-05 10:52:40 power_api.c:53:_get_avg_voltage: average_voltage = 0.000000
    2020-12-05 10:52:40 power_api.c:66:check_voltage: target_vol = 20.80, actural_vol = 0.00, more than 1.0v diff.
    2020-12-05 10:52:41 power_api.c:85:check_voltage_multi: retry time: 17
    2020-12-05 10:52:41 power_api.c:46:_get_avg_voltage: No chain exist.
    2020-12-05 10:52:41 power_api.c:53:_get_avg_voltage: average_voltage = 0.000000
    2020-12-05 10:52:41 power_api.c:66:check_voltage: target_vol = 20.80, actural_vol = 0.00, more than 1.0v diff.
    2020-12-05 10:52:42 power_api.c:85:check_voltage_multi: retry time: 18
    2020-12-05 10:52:42 power_api.c:46:_get_avg_voltage: No chain exist.
    2020-12-05 10:52:42 power_api.c:53:_get_avg_voltage: average_voltage = 0.000000
    2020-12-05 10:52:42 power_api.c:66:check_voltage: target_vol = 20.80, actural_vol = 0.00, more than 1.0v diff.
    2020-12-05 10:52:43 power_api.c:85:check_voltage_multi: retry time: 19
    2020-12-05 10:52:43 power_api.c:46:_get_avg_voltage: No chain exist.
    2020-12-05 10:52:43 power_api.c:53:_get_avg_voltage: average_voltage = 0.000000
    2020-12-05 10:52:43 power_api.c:66:check_voltage: target_vol = 20.80, actural_vol = 0.00, more than 1.0v diff.
    2020-12-05 10:52:44 power_api.c:85:check_voltage_multi: retry time: 20
    2020-12-05 10:52:44 power_api.c:46:_get_avg_voltage: No chain exist.
    2020-12-05 10:52:44 power_api.c:53:_get_avg_voltage: average_voltage = 0.000000
    2020-12-05 10:52:44 power_api.c:66:check_voltage: target_vol = 20.80, actural_vol = 0.00, more than 1.0v diff.
    2020-12-05 10:52:45 power_api.c:85:check_voltage_multi: retry time: 21
    2020-12-05 10:52:45 power_api.c:46:_get_avg_voltage: No chain exist.
    2020-12-05 10:52:45 power_api.c:53:_get_avg_voltage: average_voltage = 0.000000
    2020-12-05 10:52:45 power_api.c:66:check_voltage: target_vol = 20.80, actural_vol = 0.00, more than 1.0v diff.
    2020-12-05 10:52:46 power_api.c:85:check_voltage_multi: retry time: 22
    2020-12-05 10:52:46 power_api.c:46:_get_avg_voltage: No chain exist.
    2020-12-05 10:52:46 power_api.c:53:_get_avg_voltage: average_voltage = 0.000000
    2020-12-05 10:52:46 power_api.c:66:check_voltage: target_vol = 20.80, actural_vol = 0.00, more than 1.0v diff.
    2020-12-05 10:52:47 power_api.c:85:check_voltage_multi: retry time: 23
    2020-12-05 10:52:47 power_api.c:46:_get_avg_voltage: No chain exist.
    2020-12-05 10:52:47 power_api.c:53:_get_avg_voltage: average_voltage = 0.000000
    2020-12-05 10:52:47 power_api.c:66:check_voltage: target_vol = 20.80, actural_vol = 0.00, more than 1.0v diff.
    2020-12-05 10:52:48 power_api.c:85:check_voltage_multi: retry time: 24
    2020-12-05 10:52:48 power_api.c:46:_get_avg_voltage: No chain exist.
    2020-12-05 10:52:48 power_api.c:53:_get_avg_voltage: average_voltage = 0.000000
    2020-12-05 10:52:48 power_api.c:66:check_voltage: target_vol = 20.80, actural_vol = 0.00, more than 1.0v diff.
    2020-12-05 10:52:49 power_api.c:85:check_voltage_multi: retry time: 25
    2020-12-05 10:52:49 power_api.c:46:_get_avg_voltage: No chain exist.
    2020-12-05 10:52:49 power_api.c:53:_get_avg_voltage: average_voltage = 0.000000
    2020-12-05 10:52:49 power_api.c:66:check_voltage: target_vol = 20.80, actural_vol = 0.00, more than 1.0v diff.
    2020-12-05 10:52:50 power_api.c:85:check_voltage_multi: retry time: 26
    2020-12-05 10:52:50 power_api.c:46:_get_avg_voltage: No chain exist.
    2020-12-05 10:52:50 power_api.c:53:_get_avg_voltage: average_voltage = 0.000000
    2020-12-05 10:52:50 power_api.c:66:check_voltage: target_vol = 20.80, actural_vol = 0.00, more than 1.0v diff.
    2020-12-05 10:52:51 power_api.c:85:check_voltage_multi: retry time: 27
    2020-12-05 10:52:51 power_api.c:46:_get_avg_voltage: No chain exist.
    2020-12-05 10:52:51 power_api.c:53:_get_avg_voltage: average_voltage = 0.000000
    2020-12-05 10:52:51 power_api.c:66:check_voltage: target_vol = 20.80, actural_vol = 0.00, more than 1.0v diff.
    2020-12-05 10:52:52 power_api.c:85:check_voltage_multi: retry time: 28
    2020-12-05 10:52:52 power_api.c:46:_get_avg_voltage: No chain exist.
    2020-12-05 10:52:52 power_api.c:53:_get_avg_voltage: average_voltage = 0.000000
    2020-12-05 10:52:52 power_api.c:66:check_voltage: target_vol = 20.80, actural_vol = 0.00, more than 1.0v diff.
    2020-12-05 10:52:53 power_api.c:85:check_voltage_multi: retry time: 29
    2020-12-05 10:52:53 power_api.c:46:_get_avg_voltage: No chain exist.
    2020-12-05 10:52:53 power_api.c:53:_get_avg_voltage: average_voltage = 0.000000
    2020-12-05 10:52:53 power_api.c:66:check_voltage: target_vol = 20.80, actural_vol = 0.00, more than 1.0v diff.
    2020-12-05 10:52:54 driver-btm-api.c:222:set_miner_status: ERROR_POWER_LOST
    2020-12-05 10:52:54 driver-btm-api.c:156:stop_mining: stop mining: power set failed!
    2020-12-05 10:52:54 thread.c:1343:cancel_asic_status_monitor_thread: cancel thread
    2020-12-05 10:52:54 driver-btm-api.c:141:killall_hashboard: ****power off hashboard****

     

     

    0
    Comment actions Permalink

    Hello,Leso305

    The failure information of this miner is missing chips,please change a known good PSU for it and run it again,if it can not be fixed after doing this,then it needs to be repaired.

    0
    Comment actions Permalink

    The power supply terminals are 19.5V, these volts are on all boards.
    Does it make sense to try reinstalling using an SD card?
    Does it make sense to send the machine for repair?

    0
    Comment actions Permalink

    Hi Leso305

    If this is the case,I think it needs to be repaired.

    0
    Comment actions Permalink

    máquinas da bitmain nunca mais, são bosta pura muito ruim, minero de péssima qualidade 

     

    0
    Comment actions Permalink

    Hi, ive got the same problem and have done the stepps to ensure that everything is correct.

    Hardware Version Socket connect failed: Connection refused
    Kernel Version

    Linux 4.6.0-xilinx-gff8137b-dirty #25 SMP PREEMPT Fri Nov 23 15:30:52 CST 2018

     

     

    Booting Linux on physical CPU 0x0
    Linux version 4.6.0-xilinx-gff8137b-dirty (lzq@armdev2) (gcc version 4.8.3 20140320 (prerelease) (Sourcery CodeBench Lite 2014.05-23) ) #25 SMP PREEMPT Fri Nov 23 15:30:52 CST 2018
    CPU: ARMv7 Processor [413fc090] revision 0 (ARMv7), cr=18c5387d
    CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
    Machine model: Xilinx Zynq
    cma: Reserved 16 MiB at 0x0e000000
    Memory policy: Data cache writealloc
    On node 0 totalpages: 61440
    free_area_init_node: node 0, pgdat c0b39280, node_mem_map cde10000
    Normal zone: 480 pages used for memmap
    Normal zone: 0 pages reserved
    Normal zone: 61440 pages, LIFO batch:15
    percpu: Embedded 12 pages/cpu @cddf1000 s19776 r8192 d21184 u49152
    pcpu-alloc: s19776 r8192 d21184 u49152 alloc=12*4096
    pcpu-alloc: [0] 0 [0] 1
    Built 1 zonelists in Zone order, mobility grouping on. Total pages: 60960
    Kernel command line: mem=240M console=ttyPS0,115200 ramdisk_size=33554432 root=/dev/ram rw earlyprintk
    PID hash table entries: 1024 (order: 0, 4096 bytes)
    Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
    Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
    Memory: 203432K/245760K available (6345K kernel code, 231K rwdata, 1896K rodata, 1024K init, 223K bss, 25944K reserved, 16384K cma-reserved, 0K highmem)
    Virtual kernel memory layout:
    vector : 0xffff0000 - 0xffff1000 ( 4 kB)
    fixmap : 0xffc00000 - 0xfff00000 (3072 kB)
    vmalloc : 0xcf800000 - 0xff800000 ( 768 MB)
    lowmem : 0xc0000000 - 0xcf000000 ( 240 MB)
    pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
    modules : 0xbf000000 - 0xbfe00000 ( 14 MB)
    .text : 0xc0008000 - 0xc090c424 (9234 kB)
    .init : 0xc0a00000 - 0xc0b00000 (1024 kB)
    .data : 0xc0b00000 - 0xc0b39fe0 ( 232 kB)
    .bss : 0xc0b39fe0 - 0xc0b71c28 ( 224 kB)
    Preemptible hierarchical RCU implementation.
    Build-time adjustment of leaf fanout to 32.
    RCU restricting CPUs from NR_CPUS=4 to nr_cpu_ids=2.
    RCU: Adjusting geometry for rcu_fanout_leaf=32, nr_cpu_ids=2
    NR_IRQS:16 nr_irqs:16 16
    efuse mapped to cf800000
    ps7-slcr mapped to cf802000
    L2C: platform modifies aux control register: 0x72360000 -> 0x72760000
    L2C: DT/platform modifies aux control register: 0x72360000 -> 0x72760000
    L2C-310 erratum 769419 enabled
    L2C-310 enabling early BRESP for Cortex-A9
    L2C-310 full line of zeros enabled for Cortex-A9
    L2C-310 ID prefetch enabled, offset 1 lines
    L2C-310 dynamic clock gating enabled, standby mode enabled
    L2C-310 cache controller enabled, 8 ways, 512 kB
    L2C-310: CACHE_ID 0x410000c8, AUX_CTRL 0x76760001
    zynq_clock_init: clkc starts at cf802100
    Zynq clock init
    sched_clock: 64 bits at 333MHz, resolution 3ns, wraps every 4398046511103ns
    clocksource: arm_global_timer: mask: 0xffffffffffffffff max_cycles: 0x4ce07af025, max_idle_ns: 440795209040 ns
    Switching to timer-based delay loop, resolution 3ns
    clocksource: ttc_clocksource: mask: 0xffff max_cycles: 0xffff, max_idle_ns: 537538477 ns
    ps7-ttc #0 at cf80a000, irq=18
    Console: colour dummy device 80x30
    Calibrating delay loop (skipped), value calculated using timer frequency.. 666.66 BogoMIPS (lpj=3333333)
    pid_max: default: 32768 minimum: 301
    Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
    Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
    CPU: Testing write buffer coherency: ok
    CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
    Setting up static identity map for 0x100000 - 0x100058
    CPU1: failed to boot: -1
    Brought up 1 CPUs
    SMP: Total of 1 processors activated (666.66 BogoMIPS).
    CPU: All CPU(s) started in SVC mode.
    devtmpfs: initialized
    VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 4
    clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
    pinctrl core: initialized pinctrl subsystem
    NET: Registered protocol family 16
    DMA: preallocated 256 KiB pool for atomic coherent allocations
    cpuidle: using governor menu
    hw-breakpoint: found 5 (+1 reserved) breakpoint and 1 watchpoint registers.
    hw-breakpoint: maximum watchpoint size is 4 bytes.
    zynq-ocm f800c000.ps7-ocmc: ZYNQ OCM pool: 256 KiB @ 0xcf880000
    vgaarb: loaded
    SCSI subsystem initialized
    usbcore: registered new interface driver usbfs
    usbcore: registered new interface driver hub
    usbcore: registered new device driver usb
    media: Linux media interface: v0.10
    Linux video capture interface: v2.00
    pps_core: LinuxPPS API ver. 1 registered
    pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
    PTP clock support registered
    EDAC MC: Ver: 3.0.0
    Advanced Linux Sound Architecture Driver Initialized.
    clocksource: Switched to clocksource arm_global_timer
    NET: Registered protocol family 2
    TCP established hash table entries: 2048 (order: 1, 8192 bytes)
    TCP bind hash table entries: 2048 (order: 2, 16384 bytes)
    TCP: Hash tables configured (established 2048 bind 2048)
    UDP hash table entries: 256 (order: 1, 8192 bytes)
    UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
    NET: Registered protocol family 1
    RPC: Registered named UNIX socket transport module.
    RPC: Registered udp transport module.
    RPC: Registered tcp transport module.
    RPC: Registered tcp NFSv4.1 backchannel transport module.
    PCI: CLS 0 bytes, default 64
    Trying to unpack rootfs image as initramfs...
    rootfs image is not initramfs (no cpio magic); looks like an initrd
    Freeing initrd memory: 12904K (cce67000 - cdb01000)
    hw perfevents: enabled with armv7_cortex_a9 PMU driver, 7 counters available
    futex hash table entries: 512 (order: 3, 32768 bytes)
    workingset: timestamp_bits=28 max_order=16 bucket_order=0
    jffs2: version 2.2. (NAND) (SUMMARY) © 2001-2006 Red Hat, Inc.
    io scheduler noop registered
    io scheduler deadline registered
    io scheduler cfq registered (default)
    dma-pl330 f8003000.ps7-dma: Loaded driver for PL330 DMAC-241330
    dma-pl330 f8003000.ps7-dma: DBUFF-128x8bytes Num_Chans-8 Num_Peri-4 Num_Events-16
    e0000000.serial: ttyPS0 at MMIO 0xe0000000 (irq = 158, base_baud = 6249999) is a xuartps
    console [ttyPS0] enabled
    xdevcfg f8007000.ps7-dev-cfg: ioremap 0xf8007000 to cf86e000
    [drm] Initialized drm 1.1.0 20060810
    brd: module loaded
    loop: module loaded
    CAN device driver interface
    gpiod_set_value: invalid GPIO
    libphy: MACB_mii_bus: probed
    macb e000b000.ethernet eth0: Cadence GEM rev 0x00020118 at 0xe000b000 irq 31 (00:0a:35:00:00:00)
    Generic PHY e000b000.etherne:00: attached PHY driver [Generic PHY] (mii_bus:phy_addr=e000b000.etherne:00, irq=-1)
    e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k
    e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
    ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
    ehci-pci: EHCI PCI platform driver
    usbcore: registered new interface driver usb-storage
    mousedev: PS/2 mouse device common for all mice
    i2c /dev entries driver
    Xilinx Zynq CpuIdle Driver started
    sdhci: Secure Digital Host Controller Interface driver
    sdhci: Copyright(c) Pierre Ossman
    sdhci-pltfm: SDHCI platform and OF driver helper
    mmc0: SDHCI controller on e0100000.ps7-sdio [e0100000.ps7-sdio] using ADMA
    ledtrig-cpu: registered to indicate activity on CPUs
    usbcore: registered new interface driver usbhid
    usbhid: USB HID core driver
    nand: device found, Manufacturer ID: 0x2c, Chip ID: 0xda
    nand: Micron MT29F2G08ABAGAWP
    nand: 256 MiB, SLC, erase size: 128 KiB, page size: 2048, OOB size: 128
    nand: WARNING: pl35x-nand: the ECC used on your system is too weak compared to the one required by the NAND chip
    Bad block table found at page 131008, version 0x01
    Bad block table found at page 130944, version 0x01
    6 ofpart partitions found on MTD device pl35x-nand
    Creating 6 MTD partitions on "pl35x-nand":
    0x000000000000-0x000002800000 : "BOOT.bin-env-dts-kernel"
    0x000002800000-0x000004800000 : "ramfs"
    0x000004800000-0x000005000000 : "configs"
    0x000005000000-0x000006000000 : "reserve"
    0x000006000000-0x000008000000 : "ramfs-bak"
    0x000008000000-0x000010000000 : "reserve1"
    NET: Registered protocol family 10
    sit: IPv6 over IPv4 tunneling driver
    NET: Registered protocol family 17
    can: controller area network core (rev 20120528 abi 9)
    NET: Registered protocol family 29
    can: raw protocol (rev 20120528)
    can: broadcast manager protocol (rev 20120528 t)
    can: netlink gateway (rev 20130117) max_hops=1
    zynq_pm_ioremap: no compatible node found for 'xlnx,zynq-ddrc-a05'
    zynq_pm_late_init: Unable to map DDRC IO memory.
    Registering SWP/SWPB emulation handler
    hctosys: unable to open rtc device (rtc0)
    ALSA device list:
    No soundcards found.
    RAMDISK: gzip image found at block 0
    EXT4-fs (ram0): couldn't mount as ext3 due to feature incompatibilities
    EXT4-fs (ram0): mounted filesystem without journal. Opts: (null)
    VFS: Mounted root (ext4 filesystem) on device 1:0.
    devtmpfs: mounted
    Freeing unused kernel memory: 1024K (c0a00000 - c0b00000)
    EXT4-fs (ram0): re-mounted. Opts: block_validity,delalloc,barrier,user_xattr
    random: dd urandom read with 0 bits of entropy available
    ubi0: attaching mtd2
    ubi0: scanning is finished
    ubi0: attached mtd2 (name "configs", size 8 MiB)
    ubi0: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes
    ubi0: min./max. I/O unit sizes: 2048/2048, sub-page size 2048
    ubi0: VID header offset: 2048 (aligned 2048), data offset: 4096
    ubi0: good PEBs: 64, bad PEBs: 0, corrupted PEBs: 0
    ubi0: user volume: 1, internal volumes: 1, max. volumes count: 128
    ubi0: max/mean erase counter: 17/7, WL threshold: 4096, image sequence number: 237714726
    ubi0: available PEBs: 0, total reserved PEBs: 64, PEBs reserved for bad PEB handling: 40
    ubi0: background thread "ubi_bgt0d" started, PID 708
    UBIFS (ubi0:0): background thread "ubifs_bgt0_0" started, PID 711
    UBIFS (ubi0:0): UBIFS: mounted UBI device 0, volume 0, name "configs"
    UBIFS (ubi0:0): LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
    UBIFS (ubi0:0): FS size: 1396736 bytes (1 MiB, 11 LEBs), journal size 888833 bytes (0 MiB, 5 LEBs)
    UBIFS (ubi0:0): reserved for root: 65970 bytes (64 KiB)
    UBIFS (ubi0:0): media format: w4/r0 (latest is w4/r0), UUID FF09433B-E002-4C29-97EC-6220DDC4BB36, small LPT model
    ubi1: attaching mtd5
    ubi1: scanning is finished
    ubi1: attached mtd5 (name "reserve1", size 128 MiB)
    ubi1: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes
    ubi1: min./max. I/O unit sizes: 2048/2048, sub-page size 2048
    ubi1: VID header offset: 2048 (aligned 2048), data offset: 4096
    ubi1: good PEBs: 1020, bad PEBs: 4, corrupted PEBs: 0
    ubi1: user volume: 1, internal volumes: 1, max. volumes count: 128
    ubi1: max/mean erase counter: 2585/677, WL threshold: 4096, image sequence number: 3265111179
    ubi1: available PEBs: 0, total reserved PEBs: 1020, PEBs reserved for bad PEB handling: 36
    ubi1: background thread "ubi_bgt1d" started, PID 720
    UBIFS (ubi1:0): background thread "ubifs_bgt1_0" started, PID 723
    UBIFS (ubi1:0): UBIFS: mounted UBI device 1, volume 0, name "reserve1"
    UBIFS (ubi1:0): LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
    UBIFS (ubi1:0): FS size: 123039744 bytes (117 MiB, 969 LEBs), journal size 6221824 bytes (5 MiB, 49 LEBs)
    UBIFS (ubi1:0): reserved for root: 4952683 bytes (4836 KiB)
    UBIFS (ubi1:0): media format: w4/r0 (latest is w4/r0), UUID 1AF6F1E1-61F0-462C-AE44-C7D9596CF7E2, small LPT model
    IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
    IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
    macb e000b000.ethernet eth0: unable to generate target frequency: 25000000 Hz
    macb e000b000.ethernet eth0: link up (100/Full)
    IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
    In axi fpga driver!
    request_mem_region OK!
    AXI fpga dev virtual address is 0xcfb38000
    *base_vir_addr = 0xb023
    In fpga mem driver!
    request_mem_region OK!
    fpga mem virtual address is 0xd2000000
    random: nonblocking pool is initialized
    2021-03-27 21:03:52 driver-btm-api.c:779:init_freq_mode: This is scan-user version
    2021-03-27 21:03:52 driver-btm-api.c:2451:bitmain_soc_init: opt_multi_version = 1
    2021-03-27 21:03:52 driver-btm-api.c:2452:bitmain_soc_init: opt_bitmain_ab = 1
    2021-03-27 21:03:52 driver-btm-api.c:2453:bitmain_soc_init: opt_bitmain_work_mode = 0
    2021-03-27 21:03:52 driver-btm-api.c:2454:bitmain_soc_init: Miner compile time: Tue Jun 2 10:31:07 CST 2020 type: Antminer S17+
    2021-03-27 21:03:52 driver-btm-api.c:2455:bitmain_soc_init: commit version: 1ca50a5 2020-06-01 18:51:22, build by: lol 2020-06-02 10:37:21
    2021-03-27 21:03:52 driver-btm-api.c:2083:show_sn: len:16, 80502dc42b104814
    2021-03-27 21:03:52 driver-btm-api.c:2461:bitmain_soc_init: show sn return 1
    2021-03-27 21:03:52 driver-btm-api.c:2103:handle_sn_for_factory_mode: show sn return 1
    2021-03-27 21:03:52 driver-btm-api.c:2141:handle_sn_for_factory_mode: read sn success, 80502dc42b104814
    2021-03-27 21:03:52 fan.c:284:front_fan_power_on: Note: front fan is power on!
    2021-03-27 21:03:52 fan.c:296:rear_fan_power_on: Note: rear fan is power on!
    2021-03-27 21:03:52 driver-btm-api.c:1314:miner_device_init: Detect 256MB control board of XILINX
    2021-03-27 21:03:52 driver-btm-api.c:1255:init_fan_parameter: fan_eft : 0 fan_pwm : 0
    2021-03-27 21:03:58 driver-btm-api.c:1239:init_miner_version: miner ID : 80502dc42b104814
    2021-03-27 21:03:58 driver-btm-api.c:1245:init_miner_version: FPGA Version = 0xB023
    2021-03-27 21:04:03 driver-btm-api.c:837:get_product_id: product_id[0] = 1
    2021-03-27 21:04:03 driver-btm-api.c:837:get_product_id: product_id[1] = 1
    2021-03-27 21:04:03 driver-btm-api.c:837:get_product_id: product_id[2] = 1
    2021-03-27 21:04:03 driver-btm-api.c:2234:update_conf_by_power_feedback: Power feedback is disabled
    2021-03-27 21:04:03 driver-btm-api.c:2202:get_calibration_voltage: calibration voltage flag is error data.
    2021-03-27 21:04:03 driver-btm-api.c:2268:update_conf_by_power_feedback: Note: no calibration voltage, default diff = 0
    2021-03-27 21:04:03 frequency.c:1457:adjust_higer_max_vol_table: adjust_higer_max_vol_table, adjust_vol = 0
    2021-03-27 21:04:03 thread.c:1363:create_read_nonce_reg_thread: create thread
    2021-03-27 21:04:09 driver-btm-api.c:1239:init_miner_version: miner ID : 80502dc42b104814
    2021-03-27 21:04:09 driver-btm-api.c:1245:init_miner_version: FPGA Version = 0xB023
    2021-03-27 21:04:14 driver-btm-api.c:837:get_product_id: product_id[0] = 1
    2021-03-27 21:04:14 driver-btm-api.c:837:get_product_id: product_id[1] = 1
    2021-03-27 21:04:14 driver-btm-api.c:837:get_product_id: product_id[2] = 1
    2021-03-27 21:04:14 driver-btm-api.c:792:_set_project_type: project:0
    2021-03-27 21:04:14 driver-btm-api.c:813:_set_project_type: Project type: Antminer S17+
    2021-03-27 21:04:14 driver-btm-api.c:824:dump_pcb_bom_version: Chain [0] PCB Version: 0x0100
    2021-03-27 21:04:14 driver-btm-api.c:825:dump_pcb_bom_version: Chain [0] BOM Version: 0x0100
    2021-03-27 21:04:14 driver-btm-api.c:824:dump_pcb_bom_version: Chain [1] PCB Version: 0x0100
    2021-03-27 21:04:14 driver-btm-api.c:825:dump_pcb_bom_version: Chain [1] BOM Version: 0x0100
    2021-03-27 21:04:14 driver-btm-api.c:824:dump_pcb_bom_version: Chain [2] PCB Version: 0x0100
    2021-03-27 21:04:14 driver-btm-api.c:825:dump_pcb_bom_version: Chain [2] BOM Version: 0x0100
    2021-03-27 21:04:16 driver-btm-api.c:2372:bitmain_board_init: Fan check passed.
    2021-03-27 21:04:17 board.c:36:jump_and_app_check_restore_pic: chain[0] PIC jump to app
    2021-03-27 21:04:20 board.c:40:jump_and_app_check_restore_pic: Check chain[0] PIC fw version=0x88
    2021-03-27 21:04:21 board.c:36:jump_and_app_check_restore_pic: chain[1] PIC jump to app
    2021-03-27 21:04:23 board.c:40:jump_and_app_check_restore_pic: Check chain[1] PIC fw version=0x88
    2021-03-27 21:04:24 board.c:36:jump_and_app_check_restore_pic: chain[2] PIC jump to app
    2021-03-27 21:04:26 board.c:40:jump_and_app_check_restore_pic: Check chain[2] PIC fw version=0x88
    2021-03-27 21:04:26 thread.c:1358:create_pic_heart_beat_thread: create thread
    2021-03-27 21:04:26 power_api.c:213:power_init: Power init:
    2021-03-27 21:04:26 power_api.c:214:power_init: current_voltage_raw = 0
    2021-03-27 21:04:26 power_api.c:215:power_init: highest_voltage_raw = 2100
    2021-03-27 21:04:26 power_api.c:216:power_init: working_voltage_raw = 1950
    2021-03-27 21:04:26 power_api.c:217:power_init: higher_voltage_raw = 2040
    2021-03-27 21:04:26 power_api.c:218:power_init: check_asic_voltage_raw = 2100
    2021-03-27 21:04:26 driver-btm-api.c:2382:bitmain_board_init: Enter 30s sleep to make sure power release finish.
    2021-03-27 21:04:26 power_api.c:186:power_off: init gpio907
    2021-03-27 21:04:58 power_api.c:324:set_to_highest_voltage_by_steps: Set to voltage raw 2100, step by step.
    2021-03-27 21:05:24 power_api.c:85:check_voltage_multi: retry time: 0
    2021-03-27 21:05:25 power_api.c:40:_get_avg_voltage: chain = 0, voltage = 21.154141
    2021-03-27 21:05:26 power_api.c:40:_get_avg_voltage: chain = 1, voltage = 21.132653
    2021-03-27 21:05:27 power_api.c:40:_get_avg_voltage: chain = 2, voltage = 21.084183
    2021-03-27 21:05:27 power_api.c:53:_get_avg_voltage: average_voltage = 21.123659
    2021-03-27 21:05:27 power_api.c:71:check_voltage: target_vol = 21.00, actural_vol = 21.12, check voltage passed.
    2021-03-27 21:05:27 uart.c:72:set_baud: set fpga_baud to 115200
    2021-03-27 21:05:38 driver-btm-api.c:1134:check_asic_number_with_power_on: Chain[0]: find 65 asic, times 0
    2021-03-27 21:05:49 driver-btm-api.c:1134:check_asic_number_with_power_on: Chain[1]: find 65 asic, times 0
    2021-03-27 21:06:00 driver-btm-api.c:1134:check_asic_number_with_power_on: Chain[2]: find 65 asic, times 0
    2021-03-27 21:06:08 driver-hash-chip.c:266:set_uart_relay: set uart relay to 0x330003
    2021-03-27 21:06:08 driver-btm-api.c:435:set_order_clock: chain[0]: set order clock, stragegy 3
    2021-03-27 21:06:09 driver-btm-api.c:435:set_order_clock: chain[1]: set order clock, stragegy 3
    2021-03-27 21:06:09 driver-btm-api.c:435:set_order_clock: chain[2]: set order clock, stragegy 3
    2021-03-27 21:06:09 driver-hash-chip.c:502:set_clock_delay_control: core_data = 0x34
    2021-03-27 21:06:09 driver-btm-api.c:1892:check_clock_counter: freq 50 clock_counter_limit 6
    2021-03-27 21:06:09 register.c:979:register_process_asic_response: Get another asic response: chain = 0, asic = 56
    2021-03-27 21:06:09 register.c:979:register_process_asic_response: Get another asic response: chain = 0, asic = 56
    2021-03-27 21:06:10 voltage[0] = 1960
    2021-03-27 21:06:10 voltage[1] = 1960
    2021-03-27 21:06:10 voltage[2] = 1960
    2021-03-27 21:06:10 power_api.c:226:set_working_voltage_raw: working_voltage_raw = 1960
    2021-03-27 21:06:11 temperature.c:340:calibrate_temp_sensor_one_chain: chain 0 temp sensor NCT218
    2021-03-27 21:06:12 temperature.c:340:calibrate_temp_sensor_one_chain: chain 1 temp sensor NCT218
    2021-03-27 21:06:13 temperature.c:340:calibrate_temp_sensor_one_chain: chain 2 temp sensor NCT218
    2021-03-27 21:06:13 uart.c:72:set_baud: set fpga_baud to 12000000
    2021-03-27 21:06:15 driver-btm-api.c:293:check_bringup_temp: Bring up temperature is 9
    2021-03-27 21:06:15 thread.c:1378:create_check_miner_status_thread: create thread
    2021-03-27 21:06:15 thread.c:1368:create_show_miner_status_thread: create thread
    2021-03-27 21:06:15 thread.c:1348:create_temperature_monitor_thread: create thread
    2021-03-27 21:06:15 frequency.c:514:check_bringup_temp_dec_freq: dec freq = 0 when bringup temp = 9 dec_freq_index=0
    2021-03-27 21:06:15 freq_tuning.c:183:freq_tuning_get_max_freq: Max freq of tuning is 650
    2021-03-27 21:06:15 driver-btm-api.c:1765:send_null_work: [DEBUG] Send null work.
    2021-03-27 21:06:15 thread.c:1338:create_asic_status_monitor_thread: create thread
    2021-03-27 21:06:15 frequency.c:1110:inc_freq_with_fixed_vco: chain = 255, freq = 585, is_higher_voltage = true
    2021-03-27 21:09:07 power_api.c:352:set_to_voltage_by_steps: Set to voltage raw 2090, step by step.
    2021-03-27 21:09:09 power_api.c:85:check_voltage_multi: retry time: 0
    2021-03-27 21:09:10 power_api.c:40:_get_avg_voltage: chain = 0, voltage = 20.984714
    2021-03-27 21:09:11 power_api.c:40:_get_avg_voltage: chain = 1, voltage = 20.887899
    2021-03-27 21:09:12 power_api.c:40:_get_avg_voltage: chain = 2, voltage = 20.890306
    2021-03-27 21:09:12 power_api.c:53:_get_avg_voltage: average_voltage = 20.920973
    2021-03-27 21:09:12 power_api.c:71:check_voltage: target_vol = 20.90, actural_vol = 20.92, check voltage passed.
    2021-03-27 21:10:02 power_api.c:352:set_to_voltage_by_steps: Set to voltage raw 2080, step by step.
    2021-03-27 21:10:04 power_api.c:85:check_voltage_multi: retry time: 0
    2021-03-27 21:10:05 power_api.c:40:_get_avg_voltage: chain = 0, voltage = 20.861323
    2021-03-27 21:10:06 power_api.c:40:_get_avg_voltage: chain = 1, voltage = 20.742676
    2021-03-27 21:10:07 power_api.c:40:_get_avg_voltage: chain = 2, voltage = 20.793367
    2021-03-27 21:10:07 power_api.c:53:_get_avg_voltage: average_voltage = 20.799122
    2021-03-27 21:10:07 power_api.c:71:check_voltage: target_vol = 20.80, actural_vol = 20.80, check voltage passed.

    0
    Comment actions Permalink

Please sign in to leave a comment.