antminer s11 have low hashrate

Comments

12 comments

     i have another question..........]

    I installed the firmware with the sig extension

    How can I install old firmware ??
    Unfortunately, the new firmware does not allow the installation of the old firmware

     

    0
    Comment actions Permalink

    Booting Linux on physical CPU 0x0
    Linux version 4.6.0-xilinx-gff8137b-dirty (lzq@armdev2) (gcc version 4.8.3 20140320 (prerelease) (Sourcery CodeBench Lite 2014.05-23) ) #25 SMP PREEMPT Fri Nov 23 15:30:52 CST 2018
    CPU: ARMv7 Processor [413fc090] revision 0 (ARMv7), cr=18c5387d
    CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
    Machine model: Xilinx Zynq
    cma: Reserved 16 MiB at 0x0e000000
    Memory policy: Data cache writealloc
    On node 0 totalpages: 61440
    free_area_init_node: node 0, pgdat c0b39280, node_mem_map cde10000
    Normal zone: 480 pages used for memmap
    Normal zone: 0 pages reserved
    Normal zone: 61440 pages, LIFO batch:15
    percpu: Embedded 12 pages/cpu @cddf1000 s19776 r8192 d21184 u49152
    pcpu-alloc: s19776 r8192 d21184 u49152 alloc=12*4096
    pcpu-alloc: [0] 0 [0] 1
    Built 1 zonelists in Zone order, mobility grouping on. Total pages: 60960
    Kernel command line: mem=240M console=ttyPS0,115200 ramdisk_size=33554432 root=/dev/ram rw earlyprintk
    PID hash table entries: 1024 (order: 0, 4096 bytes)
    Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
    Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
    Memory: 199144K/245760K available (6345K kernel code, 231K rwdata, 1896K rodata, 1024K init, 223K bss, 30232K reserved, 16384K cma-reserved, 0K highmem)
    Virtual kernel memory layout:
    vector : 0xffff0000 - 0xffff1000 ( 4 kB)
    fixmap : 0xffc00000 - 0xfff00000 (3072 kB)
    vmalloc : 0xcf800000 - 0xff800000 ( 768 MB)
    lowmem : 0xc0000000 - 0xcf000000 ( 240 MB)
    pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
    modules : 0xbf000000 - 0xbfe00000 ( 14 MB)
    .text : 0xc0008000 - 0xc090c424 (9234 kB)
    .init : 0xc0a00000 - 0xc0b00000 (1024 kB)
    .data : 0xc0b00000 - 0xc0b39fe0 ( 232 kB)
    .bss : 0xc0b39fe0 - 0xc0b71c28 ( 224 kB)
    Preemptible hierarchical RCU implementation.
    Build-time adjustment of leaf fanout to 32.
    RCU restricting CPUs from NR_CPUS=4 to nr_cpu_ids=2.
    RCU: Adjusting geometry for rcu_fanout_leaf=32, nr_cpu_ids=2
    NR_IRQS:16 nr_irqs:16 16
    efuse mapped to cf800000
    ps7-slcr mapped to cf802000
    L2C: platform modifies aux control register: 0x72360000 -> 0x72760000
    L2C: DT/platform modifies aux control register: 0x72360000 -> 0x72760000
    L2C-310 erratum 769419 enabled
    L2C-310 enabling early BRESP for Cortex-A9
    L2C-310 full line of zeros enabled for Cortex-A9
    L2C-310 ID prefetch enabled, offset 1 lines
    L2C-310 dynamic clock gating enabled, standby mode enabled
    L2C-310 cache controller enabled, 8 ways, 512 kB
    L2C-310: CACHE_ID 0x410000c8, AUX_CTRL 0x76760001
    zynq_clock_init: clkc starts at cf802100
    Zynq clock init
    sched_clock: 64 bits at 333MHz, resolution 3ns, wraps every 4398046511103ns
    clocksource: arm_global_timer: mask: 0xffffffffffffffff max_cycles: 0x4ce07af025, max_idle_ns: 440795209040 ns
    Switching to timer-based delay loop, resolution 3ns
    clocksource: ttc_clocksource: mask: 0xffff max_cycles: 0xffff, max_idle_ns: 537538477 ns
    ps7-ttc #0 at cf80a000, irq=18
    Console: colour dummy device 80x30
    Calibrating delay loop (skipped), value calculated using timer frequency.. 666.66 BogoMIPS (lpj=3333333)
    pid_max: default: 32768 minimum: 301
    Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
    Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
    CPU: Testing write buffer coherency: ok
    CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
    Setting up static identity map for 0x100000 - 0x100058
    CPU1: failed to boot: -1
    Brought up 1 CPUs
    SMP: Total of 1 processors activated (666.66 BogoMIPS).
    CPU: All CPU(s) started in SVC mode.
    devtmpfs: initialized
    VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 4
    clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
    pinctrl core: initialized pinctrl subsystem
    NET: Registered protocol family 16
    DMA: preallocated 256 KiB pool for atomic coherent allocations
    cpuidle: using governor menu
    hw-breakpoint: found 5 (+1 reserved) breakpoint and 1 watchpoint registers.
    hw-breakpoint: maximum watchpoint size is 4 bytes.
    zynq-ocm f800c000.ps7-ocmc: ZYNQ OCM pool: 256 KiB @ 0xcf880000
    vgaarb: loaded
    SCSI subsystem initialized
    usbcore: registered new interface driver usbfs
    usbcore: registered new interface driver hub
    usbcore: registered new device driver usb
    media: Linux media interface: v0.10
    Linux video capture interface: v2.00
    pps_core: LinuxPPS API ver. 1 registered
    pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
    PTP clock support registered
    EDAC MC: Ver: 3.0.0
    Advanced Linux Sound Architecture Driver Initialized.
    clocksource: Switched to clocksource arm_global_timer
    NET: Registered protocol family 2
    TCP established hash table entries: 2048 (order: 1, 8192 bytes)
    TCP bind hash table entries: 2048 (order: 2, 16384 bytes)
    TCP: Hash tables configured (established 2048 bind 2048)
    UDP hash table entries: 256 (order: 1, 8192 bytes)
    UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
    NET: Registered protocol family 1
    RPC: Registered named UNIX socket transport module.
    RPC: Registered udp transport module.
    RPC: Registered tcp transport module.
    RPC: Registered tcp NFSv4.1 backchannel transport module.
    PCI: CLS 0 bytes, default 64
    Trying to unpack rootfs image as initramfs...
    rootfs image is not initramfs (no cpio magic); looks like an initrd
    Freeing initrd memory: 17192K (cca37000 - cdb01000)
    hw perfevents: enabled with armv7_cortex_a9 PMU driver, 7 counters available
    futex hash table entries: 512 (order: 3, 32768 bytes)
    workingset: timestamp_bits=28 max_order=16 bucket_order=0
    jffs2: version 2.2. (NAND) (SUMMARY) © 2001-2006 Red Hat, Inc.
    io scheduler noop registered
    io scheduler deadline registered
    io scheduler cfq registered (default)
    dma-pl330 f8003000.ps7-dma: Loaded driver for PL330 DMAC-241330
    dma-pl330 f8003000.ps7-dma: DBUFF-128x8bytes Num_Chans-8 Num_Peri-4 Num_Events-16
    e0000000.serial: ttyPS0 at MMIO 0xe0000000 (irq = 158, base_baud = 6249999) is a xuartps
    console [ttyPS0] enabled
    xdevcfg f8007000.ps7-dev-cfg: ioremap 0xf8007000 to cf86e000
    [drm] Initialized drm 1.1.0 20060810
    brd: module loaded
    loop: module loaded
    CAN device driver interface
    gpiod_set_value: invalid GPIO
    libphy: MACB_mii_bus: probed
    macb e000b000.ethernet eth0: Cadence GEM rev 0x00020118 at 0xe000b000 irq 31 (00:0a:35:00:00:00)
    Generic PHY e000b000.etherne:00: attached PHY driver [Generic PHY] (mii_bus:phy_addr=e000b000.etherne:00, irq=-1)
    e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k
    e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
    ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
    ehci-pci: EHCI PCI platform driver
    usbcore: registered new interface driver usb-storage
    mousedev: PS/2 mouse device common for all mice
    i2c /dev entries driver
    Xilinx Zynq CpuIdle Driver started
    sdhci: Secure Digital Host Controller Interface driver
    sdhci: Copyright(c) Pierre Ossman
    sdhci-pltfm: SDHCI platform and OF driver helper
    mmc0: SDHCI controller on e0100000.ps7-sdio [e0100000.ps7-sdio] using ADMA
    ledtrig-cpu: registered to indicate activity on CPUs
    usbcore: registered new interface driver usbhid
    usbhid: USB HID core driver
    nand: device found, Manufacturer ID: 0x2c, Chip ID: 0xda
    nand: Micron MT29F2G08ABAEAWP
    nand: 256 MiB, SLC, erase size: 128 KiB, page size: 2048, OOB size: 64
    nand: WARNING: pl35x-nand: the ECC used on your system is too weak compared to the one required by the NAND chip
    Bad block table found at page 131008, version 0x01
    Bad block table found at page 130944, version 0x01
    6 ofpart partitions found on MTD device pl35x-nand
    Creating 6 MTD partitions on "pl35x-nand":
    0x000000000000-0x000002800000 : "BOOT.bin-env-dts-kernel"
    0x000002800000-0x000004800000 : "ramfs"
    0x000004800000-0x000005000000 : "configs"
    0x000005000000-0x000006000000 : "reserve"
    0x000006000000-0x000008000000 : "ramfs-bak"
    0x000008000000-0x000010000000 : "reserve1"
    NET: Registered protocol family 10
    sit: IPv6 over IPv4 tunneling driver
    NET: Registered protocol family 17
    can: controller area network core (rev 20120528 abi 9)
    NET: Registered protocol family 29
    can: raw protocol (rev 20120528)
    can: broadcast manager protocol (rev 20120528 t)
    can: netlink gateway (rev 20130117) max_hops=1
    zynq_pm_ioremap: no compatible node found for 'xlnx,zynq-ddrc-a05'
    zynq_pm_late_init: Unable to map DDRC IO memory.
    Registering SWP/SWPB emulation handler
    hctosys: unable to open rtc device (rtc0)
    ALSA device list:
    No soundcards found.
    RAMDISK: gzip image found at block 0
    EXT4-fs (ram0): couldn't mount as ext3 due to feature incompatibilities
    EXT4-fs (ram0): mounted filesystem without journal. Opts: (null)
    VFS: Mounted root (ext4 filesystem) on device 1:0.
    devtmpfs: mounted
    Freeing unused kernel memory: 1024K (c0a00000 - c0b00000)
    EXT4-fs (ram0): re-mounted. Opts: block_validity,delalloc,barrier,user_xattr
    random: dd urandom read with 0 bits of entropy available
    ubi0: attaching mtd2
    ubi0: scanning is finished
    ubi0: attached mtd2 (name "configs", size 8 MiB)
    ubi0: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes
    ubi0: min./max. I/O unit sizes: 2048/2048, sub-page size 2048
    ubi0: VID header offset: 2048 (aligned 2048), data offset: 4096
    ubi0: good PEBs: 64, bad PEBs: 0, corrupted PEBs: 0
    ubi0: user volume: 1, internal volumes: 1, max. volumes count: 128
    ubi0: max/mean erase counter: 3/1, WL threshold: 4096, image sequence number: 1173541320
    ubi0: available PEBs: 0, total reserved PEBs: 64, PEBs reserved for bad PEB handling: 40
    ubi0: background thread "ubi_bgt0d" started, PID 708
    UBIFS (ubi0:0): background thread "ubifs_bgt0_0" started, PID 711
    UBIFS (ubi0:0): recovery needed
    UBIFS (ubi0:0): recovery completed
    UBIFS (ubi0:0): UBIFS: mounted UBI device 0, volume 0, name "configs"
    UBIFS (ubi0:0): LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
    UBIFS (ubi0:0): FS size: 1396736 bytes (1 MiB, 11 LEBs), journal size 888833 bytes (0 MiB, 5 LEBs)
    UBIFS (ubi0:0): reserved for root: 65970 bytes (64 KiB)
    UBIFS (ubi0:0): media format: w4/r0 (latest is w4/r0), UUID 8DFAE46C-22EE-431D-A932-8A10186FAC06, small LPT model
    ubi1: attaching mtd5
    ubi1: scanning is finished
    ubi1: attached mtd5 (name "reserve1", size 128 MiB)
    ubi1: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes
    ubi1: min./max. I/O unit sizes: 2048/2048, sub-page size 2048
    ubi1: VID header offset: 2048 (aligned 2048), data offset: 4096
    ubi1: good PEBs: 1020, bad PEBs: 4, corrupted PEBs: 0
    ubi1: user volume: 1, internal volumes: 1, max. volumes count: 128
    ubi1: max/mean erase counter: 5/2, WL threshold: 4096, image sequence number: 2268046367
    ubi1: available PEBs: 0, total reserved PEBs: 1020, PEBs reserved for bad PEB handling: 36
    ubi1: background thread "ubi_bgt1d" started, PID 720
    UBIFS (ubi1:0): background thread "ubifs_bgt1_0" started, PID 723
    UBIFS (ubi1:0): recovery needed
    UBIFS (ubi1:0): recovery completed
    UBIFS (ubi1:0): UBIFS: mounted UBI device 1, volume 0, name "reserve1"
    UBIFS (ubi1:0): LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
    UBIFS (ubi1:0): FS size: 123039744 bytes (117 MiB, 969 LEBs), journal size 6221824 bytes (5 MiB, 49 LEBs)
    UBIFS (ubi1:0): reserved for root: 4952683 bytes (4836 KiB)
    UBIFS (ubi1:0): media format: w4/r0 (latest is w4/r0), UUID FC1E0140-0911-4CF8-BD4A-58832F392306, small LPT model
    IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
    IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
    macb e000b000.ethernet eth0: unable to generate target frequency: 25000000 Hz
    macb e000b000.ethernet eth0: link up (100/Full)
    IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
    In axi fpga driver!
    request_mem_region OK!
    AXI fpga dev virtual address is 0xcfb38000
    *base_vir_addr = 0xab00d
    In fpga mem driver!
    request_mem_region OK!
    fpga mem virtual address is 0xd2000000
    random: nonblocking pool is initialized
    main.c:13999: log_level = 4
    main.c:14026: This is XILINX board. Totalram: 239353856
    main.c:14044: Detect 256MB control board of XILINX
    driver-bitmain.c:1777: mmap axi_fpga_addr = 0xb6f60000
    driver-bitmain.c:1782: axi_fpga_addr data = 0xb00d
    driver-bitmain.c:1798: mmap fpga_mem_addr = 0xb5d64000
    driver-bitmain.c:995: forceFreq=-1 forceFlag=0
    driver-bitmain.c:1697: min work minertest[0]:912


    main.c:8490: DETECT HW version=000ab00d
    main.c:14071: miner ID : 802c742a7910481c
    main.c:14100: Miner Type = S9+
    main.c:14108: AsicType = 1387
    main.c:14111: real AsicNum = 84
    main.c:14204: use critical mode to search freq...
    driver-bitmain.c:1877: get PLUG ON=0x00000007
    driver-bitmain.c:1947: Find hashboard on Chain[0]
    driver-bitmain.c:1947: Find hashboard on Chain[1]
    driver-bitmain.c:1947: Find hashboard on Chain[2]
    main.c:2148: chain[0] PIC jump to app
    main.c:2153: Check chain[0] PIC fw version=0xa4
    main.c:2148: chain[1] PIC jump to app
    main.c:2153: Check chain[1] PIC fw version=0xa4
    main.c:2148: chain[2] PIC jump to app
    main.c:2153: Check chain[2] PIC fw version=0xa4
    main.c:8805: Chain[0] read_freq_badcores : 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff
    main.c:8817: chain[0]: [255:255] [255:255] [255:255] [255:255] [255:255] [255:255] [255:255] [255:255]
    main.c:8836: chain[0]: [255:255] [255:255] [255:255] [255:255] [255:255] [255:255] [255:255] [255:255]
    main.c:9068: chain[0] has no freq in PIC! Will use default freq=0 and jump over...
    main.c:8805: Chain[1] read_freq_badcores : 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff
    main.c:8817: chain[1]: [255:255] [255:255] [255:255] [255:255] [255:255] [255:255] [255:255] [255:255]
    main.c:8836: chain[1]: [255:255] [255:255] [255:255] [255:255] [255:255] [255:255] [255:255] [255:255]
    main.c:9068: chain[1] has no freq in PIC! Will use default freq=0 and jump over...
    main.c:8805: Chain[2] read_freq_badcores : 0x7d 0xd9 0x56 0x4e 0x52 0x4e 0x56 0x52 0x52 0x56 0x4e 0x52 0x56 0x4e 0x56 0x4e 0x52 0x56 0x4e 0x52 0x52 0x4e 0x56 0x4e 0x56 0x52 0x4e 0x56 0x52 0x56 0x4e 0x52 0x4e 0x52 0x56 0x52 0x56 0x4e 0x4e 0x56 0x52 0x4e 0x52 0x56 0x52 0x4e 0x56 0x4e 0x52 0x56 0x52 0x4e 0x56 0x52 0x56 0x4e 0x56 0x52 0x4e 0x4e 0x56 0x52 0x4e 0x56 0x52 0x4e 0x52 0x56 0x56 0x4e 0x52 0x56 0x4e 0x52 0x52 0x56 0x4e 0x4e 0x56 0x52 0x56 0x4e 0x52 0x52 0x56 0x4e 0x6a 0x19 0x00 0x00 0xc8 0xef 0xbe 0xef 0xbe 0xff 0xee 0xbb 0xff 0xee 0xfb 0xfb 0xee 0xef 0xee 0xef 0xfb 0xeb 0xbf 0xfb 0xfe 0xfa 0xb7 0x11 0x00 0x00 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff
    main.c:8817: chain[2]: [255:255] [255:255] [255:255] [255:255] [255:255] [255:255] [255:255] [255:255]
    main.c:8836: chain[2]: [255:255] [255:255] [255:255] [255:255] [255:255] [255:255] [255:255] [255:255]
    main.c:8923: has freq in PIC, will disable freq setting.
    main.c:8997: chain[2] has freq in PIC and will jump over...
    main.c:8999: Chain[2] has core num in PIC
    main.c:9103: get PIC voltage=97 on chain[0], value=750
    main.c:9103: get PIC voltage=97 on chain[1], value=750
    main.c:9103: get PIC voltage=0 on chain[2], value=930
    main.c:9269: chain[0] temp offset record: 4,0,0,0,0,0,40,28
    main.c:9286: chain[0] temp chip I2C addr=0x98
    main.c:9269: chain[1] temp offset record: -1,-1,-1,-1,-1,-1,-1,-1
    main.c:9286: chain[1] temp chip I2C addr=0x98
    main.c:9269: chain[2] temp offset record: -1,-1,-1,-1,-1,-1,-1,-1
    main.c:9286: chain[2] temp chip I2C addr=0x98
    main.c:13963: total_exist_chain_num = 3
    main.c:14645: restart Miner chance num=0
    main.c:14685: waiting for receive_func to exit!
    main.c:14699: waiting for pic heart to exit!
    main.c:13934: bmminer not found= 1033 root 2156 S grep bmminer

    main.c:14743: bmminer not found, restart bmminer ...
    driver-btm-c5.c:12241:bitmain_c5_init: This is the first time running after searching freq!
    driver-btm-c5.c:12301:bitmain_c5_init: Detect 256MB control board of XILINX
    driver-btm-c5.c:12320:bitmain_c5_init: Miner Type = S9+
    driver-btm-c5.c:12327:bitmain_c5_init: Miner compile time: Tue Mar 19 14:29:33 CST 2019 type: Antminer S11
    driver-btm-c5.c:12407:bitmain_c5_init: miner ID : 802c742a7910481c
    driver-btm-c5.c:3007:check_fan_beforeInit: get fan[1] speed=4560
    driver-btm-c5.c:12564:bitmain_c5_init: Checking fans...
    driver-btm-c5.c:3007:check_fan_beforeInit: get fan[0] speed=4440
    driver-btm-c5.c:3007:check_fan_beforeInit: get fan[1] speed=4560
    driver-btm-c5.c:3007:check_fan_beforeInit: get fan[0] speed=4440
    driver-btm-c5.c:3007:check_fan_beforeInit: get fan[1] speed=4560
    driver-btm-c5.c:3007:check_fan_beforeInit: get fan[0] speed=4440
    driver-btm-c5.c:3007:check_fan_beforeInit: get fan[1] speed=4560
    driver-btm-c5.c:1767:jump_to_app_CheckAndRestorePIC_T9_18: chain[0] PIC jump to app
    driver-btm-c5.c:1768:jump_to_app_CheckAndRestorePIC_T9_18: chain[0] PIC jump to app
    driver-btm-c5.c:1773:jump_to_app_CheckAndRestorePIC_T9_18: Check chain[0] PIC fw version=0xa4
    driver-btm-c5.c:13017:bitmain_c5_init: Chain[0] read_freq_badcores : 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff
    driver-btm-c5.c:13067:bitmain_c5_init: S9+: use voltage limit rules on single board!
    driver-btm-c5.c:13071:bitmain_c5_init: S9+ fix Chain[J1] test patten OK temp=60
    driver-btm-c5.c:1767:jump_to_app_CheckAndRestorePIC_T9_18: chain[1] PIC jump to app
    driver-btm-c5.c:1768:jump_to_app_CheckAndRestorePIC_T9_18: chain[1] PIC jump to app
    driver-btm-c5.c:1773:jump_to_app_CheckAndRestorePIC_T9_18: Check chain[1] PIC fw version=0xa4
    driver-btm-c5.c:13017:bitmain_c5_init: Chain[1] read_freq_badcores : 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff
    driver-btm-c5.c:13067:bitmain_c5_init: S9+: use voltage limit rules on single board!
    driver-btm-c5.c:13071:bitmain_c5_init: S9+ fix Chain[J2] test patten OK temp=60
    driver-btm-c5.c:1767:jump_to_app_CheckAndRestorePIC_T9_18: chain[2] PIC jump to app
    driver-btm-c5.c:1768:jump_to_app_CheckAndRestorePIC_T9_18: chain[2] PIC jump to app
    driver-btm-c5.c:1773:jump_to_app_CheckAndRestorePIC_T9_18: Check chain[2] PIC fw version=0xa4
    driver-btm-c5.c:13017:bitmain_c5_init: Chain[2] read_freq_badcores : 0x7d 0xd9 0x56 0x4e 0x52 0x4e 0x56 0x52 0x52 0x56 0x4e 0x52 0x56 0x4e 0x56 0x4e 0x52 0x56 0x4e 0x52 0x52 0x4e 0x56 0x4e 0x56 0x52 0x4e 0x56 0x52 0x56 0x4e 0x52 0x4e 0x52 0x56 0x52 0x56 0x4e 0x4e 0x56 0x52 0x4e 0x52 0x56 0x52 0x4e 0x56 0x4e 0x52 0x56 0x52 0x4e 0x56 0x52 0x56 0x4e 0x56 0x52 0x4e 0x4e 0x56 0x52 0x4e 0x56 0x52 0x4e 0x52 0x56 0x56 0x4e 0x52 0x56 0x4e 0x52 0x52 0x56 0x4e 0x4e 0x56 0x52 0x56 0x4e 0x52 0x52 0x56 0x4e 0x6a 0x19 0x00 0x00 0xc8 0xef 0xbe 0xef 0xbe 0xff 0xee 0xbb 0xff 0xee 0xfb 0xfb 0xee 0xef 0xee 0xef 0xfb 0xeb 0xbf 0xfb 0xfe 0xfa 0xb7 0x11 0x00 0x00 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff
    driver-btm-c5.c:13056:bitmain_c5_init: Chain[J3] has backup chain_voltage=1085
    power.c:238:set_fixed_voltage: s9_84_fixed_voltage = 10.850000
    driver-btm-c5.c:13067:bitmain_c5_init: S9+: use voltage limit rules on single board!
    driver-btm-c5.c:13071:bitmain_c5_init: S9+ fix Chain[J3] test patten OK temp=60
    driver-btm-c5.c:12200:init_exist_chain_table: total_exist_chain_num = 3
    power.c:148:power_check_protocal_type: power protocal f5, using package cmd
    power.c:173:power_type_detect: start detect power type
    power.c:181:power_type_detect: init gpio907
    power.c:211:power_type_detect: power type is APW8 new type
    power.c:587:get_min_voltage: board[1] voltage: 9.790430
    power.c:587:get_min_voltage: board[2] voltage: 9.777539
    power.c:587:get_min_voltage: board[0] voltage: 9.742090
    power.c:593:get_min_voltage: min voltage: 9.742090
    power.c:349:get_power_iic_value_from_voltage: iic_index for voltage[60] = 10
    power.c:626:set_iic_power_voltage: voltage_tunning, set to 10.850000, N=60
    power.c:587:get_min_voltage: board[1] voltage: 10.937695
    power.c:587:get_min_voltage: board[2] voltage: 10.902246
    power.c:587:get_min_voltage: board[0] voltage: 10.889355
    power.c:593:get_min_voltage: min voltage: 10.889355
    power.c:370:voltage_tunning: last_iic_data = 60
    power.c:626:set_iic_power_voltage: voltage_tunning, set to 10.850000, N=44
    power.c:587:get_min_voltage: board[1] voltage: 11.018262
    power.c:587:get_min_voltage: board[2] voltage: 10.992480
    power.c:587:get_min_voltage: board[0] voltage: 10.979590
    power.c:593:get_min_voltage: min voltage: 10.979590
    power.c:370:voltage_tunning: last_iic_data = 44
    power.c:626:set_iic_power_voltage: voltage_tunning, set to 10.850000, N=36
    power.c:587:get_min_voltage: board[1] voltage: 11.079492
    power.c:587:get_min_voltage: board[2] voltage: 11.047266
    power.c:587:get_min_voltage: board[0] voltage: 11.024707
    power.c:593:get_min_voltage: min voltage: 11.024707
    power.c:370:voltage_tunning: last_iic_data = 36
    power.c:626:set_iic_power_voltage: voltage_tunning, set to 10.850000, N=35
    power.c:587:get_min_voltage: board[1] voltage: 11.076270
    power.c:587:get_min_voltage: board[2] voltage: 11.053711
    power.c:587:get_min_voltage: board[0] voltage: 11.027930
    power.c:593:get_min_voltage: min voltage: 11.027930
    power.c:370:voltage_tunning: last_iic_data = 35
    power.c:626:set_iic_power_voltage: voltage_tunning, set to 10.850000, N=34
    power.c:587:get_min_voltage: board[1] voltage: 11.092383
    power.c:587:get_min_voltage: board[2] voltage: 11.044043
    power.c:587:get_min_voltage: board[0] voltage: 11.037598
    power.c:593:get_min_voltage: min voltage: 11.037598
    power.c:370:voltage_tunning: last_iic_data = 34
    power.c:626:set_iic_power_voltage: voltage_tunning, set to 10.850000, N=34
    power.c:587:get_min_voltage: board[1] voltage: 11.092383
    power.c:587:get_min_voltage: board[2] voltage: 11.050488
    power.c:587:get_min_voltage: board[0] voltage: 11.044043
    power.c:593:get_min_voltage: min voltage: 11.044043
    power.c:370:voltage_tunning: last_iic_data = 34
    power.c:376:voltage_tunning: It's very close to target voltage, stop tunning
    power.c:626:set_iic_power_voltage: voltage_tunning, set to 10.850000, N=34
    power.c:587:get_min_voltage: board[1] voltage: 11.079492
    power.c:587:get_min_voltage: board[2] voltage: 11.063379
    power.c:587:get_min_voltage: board[0] voltage: 11.037598
    power.c:593:get_min_voltage: min voltage: 11.037598
    power.c:370:voltage_tunning: last_iic_data = 34
    power.c:626:set_iic_power_voltage: voltage_tunning, set to 10.900000, N=50
    power.c:587:get_min_voltage: board[1] voltage: 11.005371
    power.c:587:get_min_voltage: board[2] voltage: 10.976367
    power.c:587:get_min_voltage: board[0] voltage: 10.940918
    power.c:593:get_min_voltage: min voltage: 10.940918
    power.c:370:voltage_tunning: last_iic_data = 50
    power.c:626:set_iic_power_voltage: voltage_tunning, set to 10.900000, N=52
    power.c:587:get_min_voltage: board[1] voltage: 10.979590
    power.c:587:get_min_voltage: board[2] voltage: 10.960254
    power.c:587:get_min_voltage: board[0] voltage: 10.928027
    power.c:593:get_min_voltage: min voltage: 10.928027
    power.c:370:voltage_tunning: last_iic_data = 52
    power.c:626:set_iic_power_voltage: voltage_tunning, set to 10.900000, N=53
    power.c:587:get_min_voltage: board[1] voltage: 10.982812
    power.c:587:get_min_voltage: board[2] voltage: 10.953809
    power.c:587:get_min_voltage: board[0] voltage: 10.928027
    power.c:593:get_min_voltage: min voltage: 10.928027
    power.c:370:voltage_tunning: last_iic_data = 53
    power.c:626:set_iic_power_voltage: voltage_tunning, set to 10.900000, N=54
    power.c:587:get_min_voltage: board[1] voltage: 10.963477
    power.c:587:get_min_voltage: board[2] voltage: 10.944141
    power.c:587:get_min_voltage: board[0] voltage: 10.924805
    power.c:593:get_min_voltage: min voltage: 10.924805
    power.c:370:voltage_tunning: last_iic_data = 54
    power.c:626:set_iic_power_voltage: voltage_tunning, set to 10.900000, N=55
    power.c:587:get_min_voltage: board[1] voltage: 10.969922
    power.c:587:get_min_voltage: board[2] voltage: 10.947363
    power.c:587:get_min_voltage: board[0] voltage: 10.924805
    power.c:593:get_min_voltage: min voltage: 10.924805
    power.c:370:voltage_tunning: last_iic_data = 55
    power.c:626:set_iic_power_voltage: voltage_tunning, set to 10.900000, N=56
    power.c:587:get_min_voltage: board[1] voltage: 10.957031
    power.c:587:get_min_voltage: board[2] voltage: 10.928027
    power.c:587:get_min_voltage: board[0] voltage: 10.911914
    power.c:593:get_min_voltage: min voltage: 10.911914
    power.c:370:voltage_tunning: last_iic_data = 56
    power.c:626:set_iic_power_voltage: voltage_tunning, set to 10.900000, N=56
    power.c:587:get_min_voltage: board[1] voltage: 10.953809
    power.c:587:get_min_voltage: board[2] voltage: 10.931250
    power.c:587:get_min_voltage: board[0] voltage: 10.905469
    power.c:593:get_min_voltage: min voltage: 10.905469
    power.c:370:voltage_tunning: last_iic_data = 56
    power.c:376:voltage_tunning: It's very close to target voltage, stop tunning
    power.c:626:set_iic_power_voltage: voltage_tunning, set to 10.900000, N=56
    driver-btm-c5.c:2810:enable_pic_dac: echo 0 > /sys/class/gpio/gpio907/value
    driver-btm-c5.c:2810:enable_pic_dac: echo 0 > /sys/class/gpio/gpio907/value
    driver-btm-c5.c:2810:enable_pic_dac: echo 0 > /sys/class/gpio/gpio907/value
    driver-btm-c5.c:13298:bitmain_c5_init: Chain[J1] orignal chain_voltage_pic=97 value=750
    driver-btm-c5.c:13298:bitmain_c5_init: Chain[J2] orignal chain_voltage_pic=97 value=750
    driver-btm-c5.c:13298:bitmain_c5_init: Chain[J3] orignal chain_voltage_pic=0 value=930
    driver-btm-c5.c:13315:bitmain_c5_init: Chain[J3] will use backup chain_voltage_pic=1085 [0]
    driver-btm-c5.c:13325:bitmain_c5_init: Chain[J3] get working chain_voltage_pic=0
    driver-btm-c5.c:13416:bitmain_c5_init: Chain[J1] has 84 asic
    driver-btm-c5.c:13416:bitmain_c5_init: Chain[J2] has 84 asic
    driver-btm-c5.c:13416:bitmain_c5_init: Chain[J3] has 84 asic
    driver-btm-c5.c:4480:set_frequency: Chain[J1] has no freq in PIC, set default freq=600M
    driver-btm-c5.c:4541:set_frequency: Chain[J1] has no core num in PIC
    driver-btm-c5.c:4480:set_frequency: Chain[J2] has no freq in PIC, set default freq=600M
    driver-btm-c5.c:4541:set_frequency: Chain[J2] has no core num in PIC
    driver-btm-c5.c:4541:set_frequency: Chain[J3] has no core num in PIC
    driver-btm-c5.c:3765:get_total_rate_from_eeprom: totalrate = 6504
    driver-btm-c5.c:4588:set_frequency: miner total rate=6504GH/s ideal_total_hash_rate = 6500GH/s
    driver-btm-c5.c:4613:set_frequency: read PIC voltage=750 on chain[0]
    driver-btm-c5.c:4615:set_frequency: Chain:0 chipnum=84
    driver-btm-c5.c:4633:set_frequency: S9+ can not record Chain[J1] voltage added value
    driver-btm-c5.c:4757:set_frequency: Chain:0 base freq=600
    Asic[ 0]:600 Asic[ 1]:600 Asic[ 2]:600 Asic[ 3]:600 Asic[ 4]:600 Asic[ 5]:600 Asic[ 6]:600 Asic[ 7]:600
    Asic[ 8]:600 Asic[ 9]:600 Asic[10]:600 Asic[11]:600 Asic[12]:600 Asic[13]:600 Asic[14]:600 Asic[15]:600
    Asic[16]:600 Asic[17]:600 Asic[18]:600 Asic[19]:600 Asic[20]:600 Asic[21]:600 Asic[22]:600 Asic[23]:600
    Asic[24]:600 Asic[25]:600 Asic[26]:600 Asic[27]:600 Asic[28]:600 Asic[29]:600 Asic[30]:600 Asic[31]:600
    Asic[32]:600 Asic[33]:600 Asic[34]:600 Asic[35]:600 Asic[36]:600 Asic[37]:600 Asic[38]:600 Asic[39]:600
    Asic[40]:600 Asic[41]:600 Asic[42]:600 Asic[43]:600 Asic[44]:600 Asic[45]:600 Asic[46]:600 Asic[47]:600
    Asic[48]:600 Asic[49]:600 Asic[50]:600 Asic[51]:600 Asic[52]:600 Asic[53]:600 Asic[54]:600 Asic[55]:600
    Asic[56]:600 Asic[57]:600 Asic[58]:600 Asic[59]:600 Asic[60]:600 Asic[61]:600 Asic[62]:600 Asic[63]:600
    Asic[64]:600 Asic[65]:600 Asic[66]:600 Asic[67]:600 Asic[68]:600 Asic[69]:600 Asic[70]:600 Asic[71]:600
    Asic[72]:600 Asic[73]:600 Asic[74]:600 Asic[75]:600 Asic[76]:600 Asic[77]:600 Asic[78]:600 Asic[79]:600
    Asic[80]:600 Asic[81]:600 Asic[82]:600 Asic[83]:600
    driver-btm-c5.c:4826:set_frequency: Chain:0 max freq=600
    driver-btm-c5.c:4827:set_frequency: Chain:0 min freq=600

    driver-btm-c5.c:4613:set_frequency: read PIC voltage=750 on chain[1]
    driver-btm-c5.c:4615:set_frequency: Chain:1 chipnum=84
    driver-btm-c5.c:4633:set_frequency: S9+ can not record Chain[J2] voltage added value
    driver-btm-c5.c:4757:set_frequency: Chain:1 base freq=600
    Asic[ 0]:600 Asic[ 1]:600 Asic[ 2]:600 Asic[ 3]:600 Asic[ 4]:600 Asic[ 5]:600 Asic[ 6]:600 Asic[ 7]:600
    Asic[ 8]:600 Asic[ 9]:600 Asic[10]:600 Asic[11]:600 Asic[12]:600 Asic[13]:600 Asic[14]:600 Asic[15]:600
    Asic[16]:600 Asic[17]:600 Asic[18]:600 Asic[19]:600 Asic[20]:600 Asic[21]:600 Asic[22]:600 Asic[23]:600
    Asic[24]:600 Asic[25]:600 Asic[26]:600 Asic[27]:600 Asic[28]:600 Asic[29]:600 Asic[30]:600 Asic[31]:600
    Asic[32]:600 Asic[33]:600 Asic[34]:600 Asic[35]:600 Asic[36]:600 Asic[37]:600 Asic[38]:600 Asic[39]:600
    Asic[40]:600 Asic[41]:600 Asic[42]:600 Asic[43]:600 Asic[44]:600 Asic[45]:600 Asic[46]:600 Asic[47]:600
    Asic[48]:600 Asic[49]:600 Asic[50]:600 Asic[51]:600 Asic[52]:600 Asic[53]:600 Asic[54]:600 Asic[55]:600
    Asic[56]:600 Asic[57]:600 Asic[58]:600 Asic[59]:600 Asic[60]:600 Asic[61]:600 Asic[62]:600 Asic[63]:600
    Asic[64]:600 Asic[65]:600 Asic[66]:600 Asic[67]:600 Asic[68]:600 Asic[69]:600 Asic[70]:600 Asic[71]:600
    Asic[72]:600 Asic[73]:600 Asic[74]:600 Asic[75]:600 Asic[76]:600 Asic[77]:600 Asic[78]:600 Asic[79]:600
    Asic[80]:600 Asic[81]:600 Asic[82]:600 Asic[83]:600
    driver-btm-c5.c:4826:set_frequency: Chain:1 max freq=600
    driver-btm-c5.c:4827:set_frequency: Chain:1 min freq=600

    driver-btm-c5.c:4613:set_frequency: read PIC voltage=930 on chain[2]
    driver-btm-c5.c:4615:set_frequency: Chain:2 chipnum=84
    driver-btm-c5.c:4633:set_frequency: S9+ can not record Chain[J3] voltage added value
    driver-btm-c5.c:4757:set_frequency: Chain:2 base freq=600
    Asic[ 0]:725 Asic[ 1]:675 Asic[ 2]:700 Asic[ 3]:675 Asic[ 4]:725 Asic[ 5]:700 Asic[ 6]:700 Asic[ 7]:725
    Asic[ 8]:675 Asic[ 9]:700 Asic[10]:725 Asic[11]:675 Asic[12]:725 Asic[13]:675 Asic[14]:700 Asic[15]:725
    Asic[16]:675 Asic[17]:700 Asic[18]:700 Asic[19]:675 Asic[20]:725 Asic[21]:675 Asic[22]:725 Asic[23]:700
    Asic[24]:675 Asic[25]:725 Asic[26]:700 Asic[27]:725 Asic[28]:675 Asic[29]:700 Asic[30]:675 Asic[31]:700
    Asic[32]:725 Asic[33]:700 Asic[34]:725 Asic[35]:675 Asic[36]:675 Asic[37]:725 Asic[38]:700 Asic[39]:675
    Asic[40]:700 Asic[41]:725 Asic[42]:700 Asic[43]:675 Asic[44]:725 Asic[45]:675 Asic[46]:700 Asic[47]:725
    Asic[48]:700 Asic[49]:675 Asic[50]:725 Asic[51]:700 Asic[52]:725 Asic[53]:675 Asic[54]:725 Asic[55]:700
    Asic[56]:675 Asic[57]:675 Asic[58]:725 Asic[59]:700 Asic[60]:675 Asic[61]:725 Asic[62]:700 Asic[63]:675
    Asic[64]:700 Asic[65]:725 Asic[66]:725 Asic[67]:675 Asic[68]:700 Asic[69]:725 Asic[70]:675 Asic[71]:700
    Asic[72]:700 Asic[73]:725 Asic[74]:675 Asic[75]:675 Asic[76]:725 Asic[77]:700 Asic[78]:725 Asic[79]:675
    Asic[80]:700 Asic[81]:700 Asic[82]:725 Asic[83]:675
    driver-btm-c5.c:4826:set_frequency: Chain:2 max freq=725
    driver-btm-c5.c:4827:set_frequency: Chain:2 min freq=675


    driver-btm-c5.c:4836:set_frequency: Miner fix freq ...
    driver-btm-c5.c:4871:set_frequency: read PIC voltage=750 on chain[0]
    driver-btm-c5.c:4872:set_frequency: Chain:0 chipnum=84
    driver-btm-c5.c:4889:set_frequency: S9+ can not record Chain[J1] voltage added value
    driver-btm-c5.c:5037:set_frequency: Chain:0 base freq=600
    Asic[ 0]:600 Asic[ 1]:600 Asic[ 2]:600 Asic[ 3]:600 Asic[ 4]:600 Asic[ 5]:600 Asic[ 6]:600 Asic[ 7]:600
    Asic[ 8]:600 Asic[ 9]:600 Asic[10]:600 Asic[11]:600 Asic[12]:600 Asic[13]:600 Asic[14]:600 Asic[15]:600
    Asic[16]:600 Asic[17]:600 Asic[18]:600 Asic[19]:600 Asic[20]:600 Asic[21]:600 Asic[22]:600 Asic[23]:600
    Asic[24]:600 Asic[25]:600 Asic[26]:600 Asic[27]:600 Asic[28]:600 Asic[29]:600 Asic[30]:600 Asic[31]:600
    Asic[32]:600 Asic[33]:600 Asic[34]:600 Asic[35]:600 Asic[36]:600 Asic[37]:600 Asic[38]:600 Asic[39]:600
    Asic[40]:600 Asic[41]:600 Asic[42]:600 Asic[43]:600 Asic[44]:600 Asic[45]:600 Asic[46]:600 Asic[47]:600
    Asic[48]:600 Asic[49]:600 Asic[50]:600 Asic[51]:600 Asic[52]:600 Asic[53]:600 Asic[54]:600 Asic[55]:600
    Asic[56]:600 Asic[57]:600 Asic[58]:600 Asic[59]:600 Asic[60]:600 Asic[61]:600 Asic[62]:600 Asic[63]:600
    Asic[64]:600 Asic[65]:600 Asic[66]:600 Asic[67]:600 Asic[68]:600 Asic[69]:600 Asic[70]:600 Asic[71]:600
    Asic[72]:600 Asic[73]:600 Asic[74]:600 Asic[75]:600 Asic[76]:600 Asic[77]:600 Asic[78]:600 Asic[79]:600
    Asic[80]:600 Asic[81]:600 Asic[82]:600 Asic[83]:600
    driver-btm-c5.c:5127:set_frequency: Chain:0 max freq=600
    driver-btm-c5.c:5128:set_frequency: Chain:0 min freq=600

    driver-btm-c5.c:4871:set_frequency: read PIC voltage=750 on chain[1]
    driver-btm-c5.c:4872:set_frequency: Chain:1 chipnum=84
    driver-btm-c5.c:4889:set_frequency: S9+ can not record Chain[J2] voltage added value
    driver-btm-c5.c:5037:set_frequency: Chain:1 base freq=600
    Asic[ 0]:600 Asic[ 1]:600 Asic[ 2]:600 Asic[ 3]:600 Asic[ 4]:600 Asic[ 5]:600 Asic[ 6]:600 Asic[ 7]:600
    Asic[ 8]:600 Asic[ 9]:600 Asic[10]:600 Asic[11]:600 Asic[12]:600 Asic[13]:600 Asic[14]:600 Asic[15]:600
    Asic[16]:600 Asic[17]:600 Asic[18]:600 Asic[19]:600 Asic[20]:600 Asic[21]:600 Asic[22]:600 Asic[23]:600
    Asic[24]:600 Asic[25]:600 Asic[26]:600 Asic[27]:600 Asic[28]:600 Asic[29]:600 Asic[30]:600 Asic[31]:600
    Asic[32]:600 Asic[33]:600 Asic[34]:600 Asic[35]:600 Asic[36]:600 Asic[37]:600 Asic[38]:600 Asic[39]:600
    Asic[40]:600 Asic[41]:600 Asic[42]:600 Asic[43]:600 Asic[44]:600 Asic[45]:600 Asic[46]:600 Asic[47]:600
    Asic[48]:600 Asic[49]:600 Asic[50]:600 Asic[51]:600 Asic[52]:600 Asic[53]:600 Asic[54]:600 Asic[55]:600
    Asic[56]:600 Asic[57]:600 Asic[58]:600 Asic[59]:600 Asic[60]:600 Asic[61]:600 Asic[62]:600 Asic[63]:600
    Asic[64]:600 Asic[65]:600 Asic[66]:600 Asic[67]:600 Asic[68]:600 Asic[69]:600 Asic[70]:600 Asic[71]:600
    Asic[72]:600 Asic[73]:600 Asic[74]:600 Asic[75]:600 Asic[76]:600 Asic[77]:600 Asic[78]:600 Asic[79]:600
    Asic[80]:600 Asic[81]:600 Asic[82]:600 Asic[83]:600
    driver-btm-c5.c:5127:set_frequency: Chain:1 max freq=600
    driver-btm-c5.c:5128:set_frequency: Chain:1 min freq=600

    driver-btm-c5.c:4871:set_frequency: read PIC voltage=930 on chain[2]
    driver-btm-c5.c:4872:set_frequency: Chain:2 chipnum=84
    driver-btm-c5.c:4889:set_frequency: S9+ can not record Chain[J3] voltage added value
    driver-btm-c5.c:5037:set_frequency: Chain:2 base freq=600
    Asic[ 0]:725 Asic[ 1]:675 Asic[ 2]:700 Asic[ 3]:675 Asic[ 4]:725 Asic[ 5]:700 Asic[ 6]:700 Asic[ 7]:725
    Asic[ 8]:675 Asic[ 9]:700 Asic[10]:725 Asic[11]:675 Asic[12]:725 Asic[13]:675 Asic[14]:700 Asic[15]:725
    Asic[16]:675 Asic[17]:700 Asic[18]:700 Asic[19]:675 Asic[20]:725 Asic[21]:675 Asic[22]:725 Asic[23]:700
    Asic[24]:675 Asic[25]:725 Asic[26]:700 Asic[27]:725 Asic[28]:675 Asic[29]:700 Asic[30]:675 Asic[31]:700
    Asic[32]:725 Asic[33]:700 Asic[34]:725 Asic[35]:675 Asic[36]:675 Asic[37]:725 Asic[38]:700 Asic[39]:675
    Asic[40]:700 Asic[41]:725 Asic[42]:700 Asic[43]:675 Asic[44]:725 Asic[45]:675 Asic[46]:700 Asic[47]:725
    Asic[48]:700 Asic[49]:675 Asic[50]:725 Asic[51]:700 Asic[52]:725 Asic[53]:675 Asic[54]:725 Asic[55]:700
    Asic[56]:675 Asic[57]:675 Asic[58]:725 Asic[59]:700 Asic[60]:675 Asic[61]:725 Asic[62]:700 Asic[63]:675
    Asic[64]:700 Asic[65]:725 Asic[66]:725 Asic[67]:675 Asic[68]:700 Asic[69]:725 Asic[70]:675 Asic[71]:700
    Asic[72]:700 Asic[73]:725 Asic[74]:675 Asic[75]:675 Asic[76]:725 Asic[77]:700 Asic[78]:725 Asic[79]:675
    Asic[80]:700 Asic[81]:700 Asic[82]:725 Asic[83]:675
    driver-btm-c5.c:5127:set_frequency: Chain:2 max freq=725
    driver-btm-c5.c:5128:set_frequency: Chain:2 min freq=675

    driver-btm-c5.c:5136:set_frequency: max freq = 725
    driver-btm-c5.c:3303:set_PWM_according_to_temperature: set_PWM_according_to_temperature: fan set normal mode
    driver-btm-c5.c:9618:init_uart_baud: set baud=1
    driver-btm-c5.c:6610:calibration_sensor_offset: Chain[J1] PIC temp offset: 4,0,0,0,0,0,40,28,0,0,0,0,0,0,0,0,0,0,
    driver-btm-c5.c:6644:calibration_sensor_offset: chain[1] temp chip I2C addr=0x98
    driver-btm-c5.c:6652:calibration_sensor_offset: chain[1] has no middle temp, use special fix mode.
    driver-btm-c5.c:6677:calibration_sensor_offset: Chain[J1] chip[9] use PIC middle temp offset=0 typeID=00
    driver-btm-c5.c:6782:calibration_sensor_offset: Warning: Chain[J1] has no temp offset in PIC! will fix it
    driver-btm-c5.c:6906:calibration_sensor_offset: Chain[J1] use default temp chip[69]
    driver-btm-c5.c:6336:do_calibration_sensor_offset: Chain[J1] try read temp chip[69] ID=55 (I2C addr=0x98)
    driver-btm-c5.c:6401:do_calibration_sensor_offset: New offset Chain[1] chip[69] local:30 remote:33 offset:27
    driver-btm-c5.c:6911:calibration_sensor_offset: Chain[J1] chip[69] get middle temp offset=27 typeID=55
    driver-btm-c5.c:6906:calibration_sensor_offset: Chain[J1] use default temp chip[132]
    driver-btm-c5.c:6336:do_calibration_sensor_offset: Chain[J1] try read temp chip[132] ID=55 (I2C addr=0x98)
    driver-btm-c5.c:6401:do_calibration_sensor_offset: New offset Chain[1] chip[132] local:31 remote:34 offset:27
    driver-btm-c5.c:6911:calibration_sensor_offset: Chain[J1] chip[132] get middle temp offset=27 typeID=55
    driver-btm-c5.c:6610:calibration_sensor_offset: Chain[J2] PIC temp offset: -1,-1,-1,-1,-1,-1,-1,-1,0,0,0,0,0,0,0,0,0,0,
    driver-btm-c5.c:6644:calibration_sensor_offset: chain[2] temp chip I2C addr=0x98
    driver-btm-c5.c:6652:calibration_sensor_offset: chain[2] has no middle temp, use special fix mode.
    driver-btm-c5.c:6782:calibration_sensor_offset: Warning: Chain[J2] has no temp offset in PIC! will fix it
    driver-btm-c5.c:6906:calibration_sensor_offset: Chain[J2] use default temp chip[69]
    driver-btm-c5.c:6336:do_calibration_sensor_offset: Chain[J2] try read temp chip[69] ID=1a (I2C addr=0x98)
    driver-btm-c5.c:6394:do_calibration_sensor_offset: Warning: Chain[1] chip[69] local:32 remote:-90 offset:-104, will fixed offset=27
    driver-btm-c5.c:6401:do_calibration_sensor_offset: New offset Chain[2] chip[69] local:32 remote:-90 offset:27
    driver-btm-c5.c:6911:calibration_sensor_offset: Chain[J2] chip[69] get middle temp offset=27 typeID=1a
    driver-btm-c5.c:6906:calibration_sensor_offset: Chain[J2] use default temp chip[132]
    driver-btm-c5.c:6336:do_calibration_sensor_offset: Chain[J2] try read temp chip[132] ID=1a (I2C addr=0x98)
    driver-btm-c5.c:6394:do_calibration_sensor_offset: Warning: Chain[1] chip[132] local:34 remote:-85 offset:-106, will fixed offset=27
    driver-btm-c5.c:6401:do_calibration_sensor_offset: New offset Chain[2] chip[132] local:34 remote:-85 offset:27
    driver-btm-c5.c:6911:calibration_sensor_offset: Chain[J2] chip[132] get middle temp offset=27 typeID=1a
    driver-btm-c5.c:6610:calibration_sensor_offset: Chain[J3] PIC temp offset: -1,-1,-1,-1,-1,-1,-1,-1,0,0,0,0,0,0,0,0,0,0,
    driver-btm-c5.c:6644:calibration_sensor_offset: chain[3] temp chip I2C addr=0x98
    driver-btm-c5.c:6652:calibration_sensor_offset: chain[3] has no middle temp, use special fix mode.
    driver-btm-c5.c:6782:calibration_sensor_offset: Warning: Chain[J3] has no temp offset in PIC! will fix it
    driver-btm-c5.c:6906:calibration_sensor_offset: Chain[J3] use default temp chip[69]
    driver-btm-c5.c:6336:do_calibration_sensor_offset: Chain[J3] try read temp chip[69] ID=1a (I2C addr=0x98)
    driver-btm-c5.c:6394:do_calibration_sensor_offset: Warning: Chain[2] chip[69] local:31 remote:-91 offset:-104, will fixed offset=27
    driver-btm-c5.c:6401:do_calibration_sensor_offset: New offset Chain[3] chip[69] local:31 remote:-91 offset:27
    driver-btm-c5.c:6911:calibration_sensor_offset: Chain[J3] chip[69] get middle temp offset=27 typeID=1a
    driver-btm-c5.c:6906:calibration_sensor_offset: Chain[J3] use default temp chip[132]
    driver-btm-c5.c:6336:do_calibration_sensor_offset: Chain[J3] try read temp chip[132] ID=1a (I2C addr=0x98)
    driver-btm-c5.c:6394:do_calibration_sensor_offset: Warning: Chain[2] chip[132] local:34 remote:-89 offset:-102, will fixed offset=27
    driver-btm-c5.c:6401:do_calibration_sensor_offset: New offset Chain[3] chip[132] local:34 remote:-89 offset:27
    driver-btm-c5.c:6911:calibration_sensor_offset: Chain[J3] chip[132] get middle temp offset=27 typeID=1a
    driver-btm-c5.c:13746:bitmain_c5_init: open core three times
    driver-btm-c5.c:13746:bitmain_c5_init: open core three times
    driver-btm-c5.c:13746:bitmain_c5_init: open core three times
    driver-btm-c5.c:12108:set_working_voltage: setting to working voltage...
    power.c:654:set_iic_power_to_working_voltage: setting to working voltage...
    power.c:587:get_min_voltage: board[1] voltage: 10.892578
    power.c:587:get_min_voltage: board[2] voltage: 10.873242
    power.c:587:get_min_voltage: board[0] voltage: 10.831348
    power.c:593:get_min_voltage: min voltage: 10.831348
    power.c:370:voltage_tunning: last_iic_data = 56
    power.c:626:set_iic_power_voltage: voltage_tunning, set to 10.850000, N=40
    power.c:587:get_min_voltage: board[1] voltage: 10.986035
    power.c:587:get_min_voltage: board[2] voltage: 10.960254
    power.c:587:get_min_voltage: board[0] voltage: 10.921582
    power.c:593:get_min_voltage: min voltage: 10.921582
    power.c:370:voltage_tunning: last_iic_data = 40
    power.c:626:set_iic_power_voltage: voltage_tunning, set to 10.850000, N=32
    power.c:587:get_min_voltage: board[1] voltage: 11.031152
    power.c:587:get_min_voltage: board[2] voltage: 11.002148
    power.c:587:get_min_voltage: board[0] voltage: 10.969922
    power.c:593:get_min_voltage: min voltage: 10.969922
    power.c:370:voltage_tunning: last_iic_data = 32
    power.c:626:set_iic_power_voltage: voltage_tunning, set to 10.850000, N=24
    power.c:587:get_min_voltage: board[1] voltage: 11.079492
    power.c:587:get_min_voltage: board[2] voltage: 11.050488
    power.c:587:get_min_voltage: board[0] voltage: 11.024707
    power.c:593:get_min_voltage: min voltage: 11.024707
    power.c:370:voltage_tunning: last_iic_data = 24
    power.c:626:set_iic_power_voltage: voltage_tunning, set to 10.850000, N=23
    power.c:587:get_min_voltage: board[1] voltage: 11.082715
    power.c:587:get_min_voltage: board[2] voltage: 11.056934
    power.c:587:get_min_voltage: board[0] voltage: 11.027930
    power.c:593:get_min_voltage: min voltage: 11.027930
    power.c:370:voltage_tunning: last_iic_data = 23
    power.c:626:set_iic_power_voltage: voltage_tunning, set to 10.850000, N=22
    power.c:587:get_min_voltage: board[1] voltage: 11.082715
    power.c:587:get_min_voltage: board[2] voltage: 11.063379
    power.c:587:get_min_voltage: board[0] voltage: 11.031152
    power.c:593:get_min_voltage: min voltage: 11.031152
    power.c:370:voltage_tunning: last_iic_data = 22
    power.c:626:set_iic_power_voltage: voltage_tunning, set to 10.850000, N=22
    power.c:587:get_min_voltage: board[1] voltage: 11.095605
    power.c:587:get_min_voltage: board[2] voltage: 11.053711
    power.c:587:get_min_voltage: board[0] voltage: 11.031152
    power.c:593:get_min_voltage: min voltage: 11.031152
    power.c:370:voltage_tunning: last_iic_data = 22
    power.c:376:voltage_tunning: It's very close to target voltage, stop tunning
    power.c:626:set_iic_power_voltage: voltage_tunning, set to 10.850000, N=22
    driver-btm-c5.c:13949:bitmain_c5_init: start thread for read temp
    setStartTimePoint total_tv_start_sys=230 total_tv_end_sys=231
    driver-btm-c5.c:10333:check_system_work: restartNum = 2 , auto-reinit enabled...
    driver-btm-c5.c:8743:read_temp_func: bring_up_pcb_temp = 50
    driver-btm-c5.c:12108:set_working_voltage: setting to working voltage...
    power.c:654:set_iic_power_to_working_voltage: setting to working voltage...
    power.c:587:get_min_voltage: board[1] voltage: 11.095605
    power.c:587:get_min_voltage: board[2] voltage: 11.063379
    power.c:587:get_min_voltage: board[0] voltage: 11.024707
    power.c:593:get_min_voltage: min voltage: 11.024707
    power.c:370:voltage_tunning: last_iic_data = 22
    power.c:626:set_iic_power_voltage: voltage_tunning, set to 10.850000, N=21
    power.c:587:get_min_voltage: board[1] voltage: 11.095605
    power.c:587:get_min_voltage: board[2] voltage: 11.060156
    power.c:587:get_min_voltage: board[0] voltage: 11.044043
    power.c:593:get_min_voltage: min voltage: 11.044043
    power.c:370:voltage_tunning: last_iic_data = 21
    power.c:626:set_iic_power_voltage: voltage_tunning, set to 10.850000, N=21
    power.c:587:get_min_voltage: board[1] voltage: 11.095605
    power.c:587:get_min_voltage: board[2] voltage: 11.069824
    power.c:587:get_min_voltage: board[0] voltage: 11.040820
    power.c:593:get_min_voltage: min voltage: 11.040820
    power.c:370:voltage_tunning: last_iic_data = 21
    power.c:376:voltage_tunning: It's very close to target voltage, stop tunning
    power.c:626:set_iic_power_voltage: voltage_tunning, set to 10.850000, N=21
    driver-btm-c5.c:10500:check_system_work: voltage_check_done
    driver-btm-c5.c:9900:if_avg_hash_ok: avg hash rate = 17467.238962, ideal hash rate = 6500
    driver-btm-c5.c:10394:check_system_work: hash rate is ok now
    do read_temp_func once...

    get RT hashrate from Chain[0]: (asic index start from 1-84)
    Asic[01]=67.5450 Asic[02]=70.6320 Asic[03]=77.5770 Asic[04]=67.0240 Asic[05]=72.9300 Asic[06]=67.8630 Asic[07]=67.9980 Asic[08]=69.3060
    Asic[09]=69.9100 Asic[10]=62.1590 Asic[11]=65.1960 Asic[12]=66.6550 Asic[13]=70.7490 Asic[14]=67.7790 Asic[15]=70.0610 Asic[16]=72.3600
    Asic[17]=72.5780 Asic[18]=67.0920 Asic[19]=69.2560 Asic[20]=73.4170 Asic[21]=68.2490 Asic[22]=65.6150 Asic[23]=65.3300 Asic[24]=67.9300
    Asic[25]=69.9100 Asic[26]=68.7860 Asic[27]=69.7590 Asic[28]=68.9370 Asic[29]=70.1450 Asic[30]=62.3440 Asic[31]=62.7800 Asic[32]=63.5850
    Asic[33]=65.1960 Asic[34]=71.0510 Asic[35]=67.1590 Asic[36]=69.0550 Asic[37]=60.9340 Asic[38]=71.9070 Asic[39]=75.6650 Asic[40]=68.0310
    Asic[41]=66.9240 Asic[42]=71.0680 Asic[43]=68.0810 Asic[44]=65.6990 Asic[45]=69.8770 Asic[46]=70.6820 Asic[47]=69.4910 Asic[48]=71.7720
    Asic[49]=69.5410 Asic[50]=72.9800 Asic[51]=70.6820 Asic[52]=68.4840 Asic[53]=61.9240 Asic[54]=69.7260 Asic[55]=68.4510 Asic[56]=70.7660
    Asic[57]=69.0880 Asic[58]=65.2460 Asic[59]=75.3460 Asic[60]=63.6860 Asic[61]=70.0110 Asic[62]=67.1420 Asic[63]=68.0650 Asic[64]=65.9170
    Asic[65]=63.0480 Asic[66]=74.7080 Asic[67]=64.3900 Asic[68]=65.1290 Asic[69]=66.6220 Asic[70]=72.7290 Asic[71]=66.0180 Asic[72]=67.0240
    Asic[73]=65.3970 Asic[74]=66.5380 Asic[75]=66.1690 Asic[76]=68.6850 Asic[77]=66.1520 Asic[78]=65.4310 Asic[79]=67.7120 Asic[80]=69.9440
    Asic[81]=70.2290 Asic[82]=66.3370 Asic[83]=67.7290 Asic[84]=66.7560

    get RT hashrate from Chain[1]: (asic index start from 1-84)
    Asic[01]=67.3430 Asic[02]=67.4770 Asic[03]=71.2360 Asic[04]=67.5280 Asic[05]=72.1920 Asic[06]=65.4140 Asic[07]=68.7860 Asic[08]=66.3030
    Asic[09]=72.8800 Asic[10]=70.4300 Asic[11]=73.3330 Asic[12]=69.3570 Asic[13]=70.9670 Asic[14]=64.9780 Asic[15]=64.8770 Asic[16]=65.4980
    Asic[17]=65.0620 Asic[18]=66.8400 Asic[19]=73.0640 Asic[20]=65.7160 Asic[21]=70.6150 Asic[22]=64.7430 Asic[23]=66.2860 Asic[24]=71.3700
    Asic[25]=72.9970 Asic[26]=71.8560 Asic[27]=70.5810 Asic[28]=68.6520 Asic[29]=66.5880 Asic[30]=63.1990 Asic[31]=64.2900 Asic[32]=71.2690
    Asic[33]=66.0850 Asic[34]=68.1150 Asic[35]=68.0140 Asic[36]=65.1120 Asic[37]=70.4640 Asic[38]=68.5850 Asic[39]=68.5340 Asic[40]=67.6620
    Asic[41]=63.5010 Asic[42]=65.6490 Asic[43]=67.8300 Asic[44]=69.9100 Asic[45]=66.5880 Asic[46]=63.5680 Asic[47]=68.2490 Asic[48]=66.0010
    Asic[49]=69.1720 Asic[50]=73.4000 Asic[51]=68.1320 Asic[52]=72.9470 Asic[53]=68.4340 Asic[54]=66.9240 Asic[55]=64.6590 Asic[56]=75.0440
    Asic[57]=67.2260 Asic[58]=63.0320 Asic[59]=65.7490 Asic[60]=71.9910 Asic[61]=70.2120 Asic[62]=67.5450 Asic[63]=72.0740 Asic[64]=39.0230
    Asic[65]=71.6720 Asic[66]=68.6350 Asic[67]=72.1580 Asic[68]=70.3970 Asic[69]=74.2720 Asic[70]=66.6390 Asic[71]=67.1250 Asic[72]=70.3130
    Asic[73]=64.5750 Asic[74]=67.6620 Asic[75]=64.1220 Asic[76]=70.7660 Asic[77]=67.2430 Asic[78]=70.3460 Asic[79]=71.3030 Asic[80]=71.4200
    Asic[81]=67.6450 Asic[82]=69.7090 Asic[83]=67.4440 Asic[84]=68.6350

    get RT hashrate from Chain[2]: (asic index start from 1-84)
    Asic[01]=84.0700 Asic[02]=74.6410 Asic[03]=83.7010 Asic[04]=72.2090 Asic[05]=84.2880 Asic[06]=82.9290 Asic[07]=49.9450 Asic[08]=85.7810
    Asic[09]=77.3590 Asic[10]=77.6780 Asic[11]=83.6000 Asic[12]=74.7420 Asic[13]=80.7150 Asic[14]=73.2490 Asic[15]=82.4260 Asic[16]=82.1240
    Asic[17]=79.8250 Asic[18]=80.4460 Asic[19]=76.8390 Asic[20]=80.9160 Asic[21]=82.4930 Asic[22]=77.8960 Asic[23]=87.4760 Asic[24]=83.1470
    Asic[25]=72.0410 Asic[26]=77.6110 Asic[27]=82.8960 Asic[28]=82.2410 Asic[29]=71.1850 Asic[30]=75.7650 Asic[31]=77.8120 Asic[32]=84.0200
    Asic[33]=76.3190 Asic[34]=75.5310 Asic[35]=79.9930 Asic[36]=80.6810 Asic[37]=76.8390 Asic[38]=82.0570 Asic[39]=80.8320 Asic[40]=74.8260
    Asic[41]=84.6740 Asic[42]=88.3650 Asic[43]=78.2150 Asic[44]=81.9900 Asic[45]=84.7080 Asic[46]=73.0640 Asic[47]=83.5670 Asic[48]=79.5740
    Asic[49]=74.8760 Asic[50]=76.2690 Asic[51]=82.0400 Asic[52]=86.1670 Asic[53]=76.9230 Asic[54]=79.9430 Asic[55]=84.6740 Asic[56]=80.9500
    Asic[57]=78.9200 Asic[58]=75.6820 Asic[59]=80.2450 Asic[60]=78.0640 Asic[61]=75.4630 Asic[62]=80.8820 Asic[63]=80.2780 Asic[64]=70.2460
    Asic[65]=80.4800 Asic[66]=75.8330 Asic[67]=79.6910 Asic[68]=78.6680 Asic[69]=81.0500 Asic[70]=76.7220 Asic[71]=75.2790 Asic[72]=79.8090
    Asic[73]=81.7210 Asic[74]=79.0540 Asic[75]=78.2480 Asic[76]=79.7920 Asic[77]=82.7780 Asic[78]=81.5030 Asic[79]=77.9460 Asic[80]=78.3490
    Asic[81]=80.5640 Asic[82]=82.4430 Asic[83]=87.5260 Asic[84]=69.0550
    Check Chain[J1] ASIC RT error: (asic index start from 1-84)
    Check Chain[J2] ASIC RT error: (asic index start from 1-84)
    Check Chain[J3] ASIC RT error: (asic index start from 1-84)
    Done check_asic_reg
    Chain[0] Chip[69] pcb temperature=38
    Chain[0] Chip[18] junction temperature=47
    Special fix Chain[0] Chip[18] middle Temp = 53
    Chain[0] Chip[132] pcb temperature=56
    Chain[0] Chip[34] junction temperature=62
    Special fix Chain[0] Chip[34] middle Temp = 71
    Done read temp on Chain[0]
    Chain[1] Chip[69] pcb temperature=41
    Chain[1] Chip[18] junction temperature=112
    Special fix Chain[1] Chip[18] middle Temp = 56
    Chain[1] Chip[132] pcb temperature=58
    Chain[1] Chip[34] junction temperature=141
    Special fix Chain[1] Chip[34] middle Temp = 73
    Done read temp on Chain[1]
    Chain[2] Chip[69] pcb temperature=41
    Chain[2] Chip[18] junction temperature=117
    Special fix Chain[2] Chip[18] middle Temp = 56
    Chain[2] Chip[132] pcb temperature=60
    Chain[2] Chip[34] junction temperature=142
    Special fix Chain[2] Chip[34] middle Temp = 75
    Done read temp on Chain[2]
    Max pcb temp : 60
    FAN PWM: 87
    read_temp_func Done!
    CRC error counter=0

    0
    Comment actions Permalink

    please see kernel log

    Why have two of my hasboards  lost their hash rate output ???
    And its frequency does not increase more than the default value of 600 ??

    0
    Comment actions Permalink

     

    hi

    my miner frimware ver

    last frimware or sig

    where can i download s11 older frimware????

    how back to older frimware ??

     

     

    when i want install other version give error

    0
    Comment actions Permalink

    The Fiber Optics Installer terminates and tests the optical fiber with a connector at a piece of equipment. They will have to design the whole fiber optic system and take care of the fiber and cable construction. It is the cable installer who is responsible for installing end connectors. The professionals should have a strong understanding of the factors that affect the fibers.

    0
    Comment actions Permalink

    The aspiring professional online assignment writer, everyone wants to get help from UK Assignments Help. UK Assignments is an interdisciplinary term of providing academic content writing services.

    0
    Comment actions Permalink
  • Hi Milani1387

    Sorry, we do not provide the download of the old firmware, the latest version of the firmware performance is better than the old version.

    0
    Comment actions Permalink
  • Hi Milani1387

    The latest firmware version for S11 is 20190801,please download that one to upgrade,thank you.

    0
    Comment actions Permalink

    IDM Crack is designed to operate on many devices, particularly on almost all the varieties of Windows. The most supported and compatible Windows flavor that enables IDM cracks for all functions in a workable state is Microsoft Windows 10. Whenever new versions of common browsers are published by Google Chrome, Mozilla Firefox, Opera, Netscape, Internet Explorer, etc., the Internet Download Manager design team updates IDM daily. This revised version of the IDM patch allows end-users to use applications that have helped address any challenge that the user might find. You have to visit the IDM homepage to test the most current update with just a few quick clicks to download the official IDM update. Besides, the links below for IDM updates can be found on this page, along with full program update instructions.

     

    0
    Comment actions Permalink
    • Thank you for this post. Thank you for sharing the information about low hashrate. Now I know more about it. You can make a video about it too


      I will be able to buy instagram followers using https://soclikes.com to enlarge their amount.

       
    0
    Comment actions Permalink

    Thanks to author, this information was userful for me, cause it helped to solve simmilar issue.


    Use the help of https://viplikes.net/ to quickly increase the number of instagram followers.

    0
    Comment actions Permalink
    • Thank you for this post. Thank you for sharing the information about antminer s11. Now I know more about it. You can make a video about it too


      I will be able to buy instagram followers using https://viplikes.us to enlarge their amount.

       
    0
    Comment actions Permalink

Please sign in to leave a comment.