S17+ PROBLEM,

Comments

5 comments

    hi guys, nothing! nothing!!!! OMG.... nobody reply me.... 

     

    here its the log of my s17+ #1

    Booting Linux on physical CPU 0x0
    Linux version 4.6.0-xilinx-gff8137b-dirty (lzq@armdev2) (gcc version 4.8.3 20140320 (prerelease) (Sourcery CodeBench Lite 2014.05-23) ) #25 SMP PREEMPT Fri Nov 23 15:30:52 CST 2018
    CPU: ARMv7 Processor [413fc090] revision 0 (ARMv7), cr=18c5387d
    CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
    Machine model: Xilinx Zynq
    cma: Reserved 16 MiB at 0x0e000000
    Memory policy: Data cache writealloc
    On node 0 totalpages: 61440
    free_area_init_node: node 0, pgdat c0b39280, node_mem_map cde10000
    Normal zone: 480 pages used for memmap
    Normal zone: 0 pages reserved
    Normal zone: 61440 pages, LIFO batch:15
    percpu: Embedded 12 pages/cpu @cddf1000 s19776 r8192 d21184 u49152
    pcpu-alloc: s19776 r8192 d21184 u49152 alloc=12*4096
    pcpu-alloc: [0] 0 [0] 1
    Built 1 zonelists in Zone order, mobility grouping on. Total pages: 60960
    Kernel command line: mem=240M console=ttyPS0,115200 ramdisk_size=33554432 root=/dev/ram rw earlyprintk
    PID hash table entries: 1024 (order: 0, 4096 bytes)
    Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
    Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
    Memory: 203444K/245760K available (6345K kernel code, 231K rwdata, 1896K rodata, 1024K init, 223K bss, 25932K reserved, 16384K cma-reserved, 0K highmem)
    Virtual kernel memory layout:
    vector : 0xffff0000 - 0xffff1000 ( 4 kB)
    fixmap : 0xffc00000 - 0xfff00000 (3072 kB)
    vmalloc : 0xcf800000 - 0xff800000 ( 768 MB)
    lowmem : 0xc0000000 - 0xcf000000 ( 240 MB)
    pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
    modules : 0xbf000000 - 0xbfe00000 ( 14 MB)
    .text : 0xc0008000 - 0xc090c424 (9234 kB)
    .init : 0xc0a00000 - 0xc0b00000 (1024 kB)
    .data : 0xc0b00000 - 0xc0b39fe0 ( 232 kB)
    .bss : 0xc0b39fe0 - 0xc0b71c28 ( 224 kB)
    Preemptible hierarchical RCU implementation.
    Build-time adjustment of leaf fanout to 32.
    RCU restricting CPUs from NR_CPUS=4 to nr_cpu_ids=2.
    RCU: Adjusting geometry for rcu_fanout_leaf=32, nr_cpu_ids=2
    NR_IRQS:16 nr_irqs:16 16
    efuse mapped to cf800000
    ps7-slcr mapped to cf802000
    L2C: platform modifies aux control register: 0x72360000 -> 0x72760000
    L2C: DT/platform modifies aux control register: 0x72360000 -> 0x72760000
    L2C-310 erratum 769419 enabled
    L2C-310 enabling early BRESP for Cortex-A9
    L2C-310 full line of zeros enabled for Cortex-A9
    L2C-310 ID prefetch enabled, offset 1 lines
    L2C-310 dynamic clock gating enabled, standby mode enabled
    L2C-310 cache controller enabled, 8 ways, 512 kB
    L2C-310: CACHE_ID 0x410000c8, AUX_CTRL 0x76760001
    zynq_clock_init: clkc starts at cf802100
    Zynq clock init
    sched_clock: 64 bits at 333MHz, resolution 3ns, wraps every 4398046511103ns
    clocksource: arm_global_timer: mask: 0xffffffffffffffff max_cycles: 0x4ce07af025, max_idle_ns: 440795209040 ns
    Switching to timer-based delay loop, resolution 3ns
    clocksource: ttc_clocksource: mask: 0xffff max_cycles: 0xffff, max_idle_ns: 537538477 ns
    ps7-ttc #0 at cf80a000, irq=18
    Console: colour dummy device 80x30
    Calibrating delay loop (skipped), value calculated using timer frequency.. 666.66 BogoMIPS (lpj=3333333)
    pid_max: default: 32768 minimum: 301
    Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
    Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
    CPU: Testing write buffer coherency: ok
    CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
    Setting up static identity map for 0x100000 - 0x100058
    CPU1: failed to boot: -1
    Brought up 1 CPUs
    SMP: Total of 1 processors activated (666.66 BogoMIPS).
    CPU: All CPU(s) started in SVC mode.
    devtmpfs: initialized
    VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 4
    clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
    pinctrl core: initialized pinctrl subsystem
    NET: Registered protocol family 16
    DMA: preallocated 256 KiB pool for atomic coherent allocations
    cpuidle: using governor menu
    hw-breakpoint: found 5 (+1 reserved) breakpoint and 1 watchpoint registers.
    hw-breakpoint: maximum watchpoint size is 4 bytes.
    zynq-ocm f800c000.ps7-ocmc: ZYNQ OCM pool: 256 KiB @ 0xcf880000
    vgaarb: loaded
    SCSI subsystem initialized
    usbcore: registered new interface driver usbfs
    usbcore: registered new interface driver hub
    usbcore: registered new device driver usb
    media: Linux media interface: v0.10
    Linux video capture interface: v2.00
    pps_core: LinuxPPS API ver. 1 registered
    pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
    PTP clock support registered
    EDAC MC: Ver: 3.0.0
    Advanced Linux Sound Architecture Driver Initialized.
    clocksource: Switched to clocksource arm_global_timer
    NET: Registered protocol family 2
    TCP established hash table entries: 2048 (order: 1, 8192 bytes)
    TCP bind hash table entries: 2048 (order: 2, 16384 bytes)
    TCP: Hash tables configured (established 2048 bind 2048)
    UDP hash table entries: 256 (order: 1, 8192 bytes)
    UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
    NET: Registered protocol family 1
    RPC: Registered named UNIX socket transport module.
    RPC: Registered udp transport module.
    RPC: Registered tcp transport module.
    RPC: Registered tcp NFSv4.1 backchannel transport module.
    PCI: CLS 0 bytes, default 64
    Trying to unpack rootfs image as initramfs...
    rootfs image is not initramfs (no cpio magic); looks like an initrd
    Freeing initrd memory: 12892K (cce6a000 - cdb01000)
    hw perfevents: enabled with armv7_cortex_a9 PMU driver, 7 counters available
    futex hash table entries: 512 (order: 3, 32768 bytes)
    workingset: timestamp_bits=28 max_order=16 bucket_order=0
    jffs2: version 2.2. (NAND) (SUMMARY) © 2001-2006 Red Hat, Inc.
    io scheduler noop registered
    io scheduler deadline registered
    io scheduler cfq registered (default)
    dma-pl330 f8003000.ps7-dma: Loaded driver for PL330 DMAC-241330
    dma-pl330 f8003000.ps7-dma: DBUFF-128x8bytes Num_Chans-8 Num_Peri-4 Num_Events-16
    e0000000.serial: ttyPS0 at MMIO 0xe0000000 (irq = 158, base_baud = 6249999) is a xuartps
    console [ttyPS0] enabled
    xdevcfg f8007000.ps7-dev-cfg: ioremap 0xf8007000 to cf86e000
    [drm] Initialized drm 1.1.0 20060810
    brd: module loaded
    loop: module loaded
    CAN device driver interface
    gpiod_set_value: invalid GPIO
    libphy: MACB_mii_bus: probed
    macb e000b000.ethernet eth0: Cadence GEM rev 0x00020118 at 0xe000b000 irq 31 (00:0a:35:00:00:00)
    Generic PHY e000b000.etherne:00: attached PHY driver [Generic PHY] (mii_bus:phy_addr=e000b000.etherne:00, irq=-1)
    e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k
    e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
    ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
    ehci-pci: EHCI PCI platform driver
    usbcore: registered new interface driver usb-storage
    mousedev: PS/2 mouse device common for all mice
    i2c /dev entries driver
    Xilinx Zynq CpuIdle Driver started
    sdhci: Secure Digital Host Controller Interface driver
    sdhci: Copyright(c) Pierre Ossman
    sdhci-pltfm: SDHCI platform and OF driver helper
    mmc0: SDHCI controller on e0100000.ps7-sdio [e0100000.ps7-sdio] using ADMA
    ledtrig-cpu: registered to indicate activity on CPUs
    usbcore: registered new interface driver usbhid
    usbhid: USB HID core driver
    nand: device found, Manufacturer ID: 0x2c, Chip ID: 0xda
    nand: Micron MT29F2G08ABAEAWP
    nand: 256 MiB, SLC, erase size: 128 KiB, page size: 2048, OOB size: 64
    nand: WARNING: pl35x-nand: the ECC used on your system is too weak compared to the one required by the NAND chip
    Bad block table found at page 131008, version 0x01
    Bad block table found at page 130944, version 0x01
    6 ofpart partitions found on MTD device pl35x-nand
    Creating 6 MTD partitions on "pl35x-nand":
    0x000000000000-0x000002800000 : "BOOT.bin-env-dts-kernel"
    0x000002800000-0x000004800000 : "ramfs"
    0x000004800000-0x000005000000 : "configs"
    0x000005000000-0x000006000000 : "reserve"
    0x000006000000-0x000008000000 : "ramfs-bak"
    0x000008000000-0x000010000000 : "reserve1"
    NET: Registered protocol family 10
    sit: IPv6 over IPv4 tunneling driver
    NET: Registered protocol family 17
    can: controller area network core (rev 20120528 abi 9)
    NET: Registered protocol family 29
    can: raw protocol (rev 20120528)
    can: broadcast manager protocol (rev 20120528 t)
    can: netlink gateway (rev 20130117) max_hops=1
    zynq_pm_ioremap: no compatible node found for 'xlnx,zynq-ddrc-a05'
    zynq_pm_late_init: Unable to map DDRC IO memory.
    Registering SWP/SWPB emulation handler
    hctosys: unable to open rtc device (rtc0)
    ALSA device list:
    No soundcards found.
    RAMDISK: gzip image found at block 0
    EXT4-fs (ram0): couldn't mount as ext3 due to feature incompatibilities
    EXT4-fs (ram0): mounted filesystem without journal. Opts: (null)
    VFS: Mounted root (ext4 filesystem) on device 1:0.
    devtmpfs: mounted
    Freeing unused kernel memory: 1024K (c0a00000 - c0b00000)
    EXT4-fs (ram0): re-mounted. Opts: block_validity,delalloc,barrier,user_xattr
    random: dd urandom read with 0 bits of entropy available
    ubi0: attaching mtd2
    ubi0: scanning is finished
    ubi0: attached mtd2 (name "configs", size 8 MiB)
    ubi0: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes
    ubi0: min./max. I/O unit sizes: 2048/2048, sub-page size 2048
    ubi0: VID header offset: 2048 (aligned 2048), data offset: 4096
    ubi0: good PEBs: 64, bad PEBs: 0, corrupted PEBs: 0
    ubi0: user volume: 1, internal volumes: 1, max. volumes count: 128
    ubi0: max/mean erase counter: 47/17, WL threshold: 4096, image sequence number: 262741923
    ubi0: available PEBs: 0, total reserved PEBs: 64, PEBs reserved for bad PEB handling: 40
    ubi0: background thread "ubi_bgt0d" started, PID 708
    UBIFS (ubi0:0): background thread "ubifs_bgt0_0" started, PID 711
    UBIFS (ubi0:0): UBIFS: mounted UBI device 0, volume 0, name "configs"
    UBIFS (ubi0:0): LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
    UBIFS (ubi0:0): FS size: 1396736 bytes (1 MiB, 11 LEBs), journal size 888833 bytes (0 MiB, 5 LEBs)
    UBIFS (ubi0:0): reserved for root: 65970 bytes (64 KiB)
    UBIFS (ubi0:0): media format: w4/r0 (latest is w4/r0), UUID A9E8BDA4-70DE-45D9-83BE-2DD9F129C0C6, small LPT model
    ubi1: attaching mtd5
    ubi1: scanning is finished
    ubi1: attached mtd5 (name "reserve1", size 128 MiB)
    ubi1: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes
    ubi1: min./max. I/O unit sizes: 2048/2048, sub-page size 2048
    ubi1: VID header offset: 2048 (aligned 2048), data offset: 4096
    ubi1: good PEBs: 1020, bad PEBs: 4, corrupted PEBs: 0
    ubi1: user volume: 1, internal volumes: 1, max. volumes count: 128
    ubi1: max/mean erase counter: 163/45, WL threshold: 4096, image sequence number: 3563076859
    ubi1: available PEBs: 0, total reserved PEBs: 1020, PEBs reserved for bad PEB handling: 36
    ubi1: background thread "ubi_bgt1d" started, PID 720
    UBIFS (ubi1:0): background thread "ubifs_bgt1_0" started, PID 723
    UBIFS (ubi1:0): UBIFS: mounted UBI device 1, volume 0, name "reserve1"
    UBIFS (ubi1:0): LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
    UBIFS (ubi1:0): FS size: 123039744 bytes (117 MiB, 969 LEBs), journal size 6221824 bytes (5 MiB, 49 LEBs)
    UBIFS (ubi1:0): reserved for root: 4952683 bytes (4836 KiB)
    UBIFS (ubi1:0): media format: w4/r0 (latest is w4/r0), UUID A21581E4-693A-4BBF-A66A-FCE5ACD2EF7F, small LPT model
    IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
    IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
    macb e000b000.ethernet eth0: unable to generate target frequency: 25000000 Hz
    macb e000b000.ethernet eth0: link up (100/Full)
    IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
    In axi fpga driver!
    request_mem_region OK!
    AXI fpga dev virtual address is 0xcfb38000
    *base_vir_addr = 0xb023
    In fpga mem driver!
    request_mem_region OK!
    fpga mem virtual address is 0xd2000000
    random: nonblocking pool is initialized
    2020-05-24 15:12:25 driver-btm-api.c:741:init_freq_mode: This is scan-user version
    2020-05-24 15:12:25 driver-btm-api.c:2413:bitmain_soc_init: opt_multi_version = 1
    2020-05-24 15:12:25 driver-btm-api.c:2414:bitmain_soc_init: opt_bitmain_ab = 1
    2020-05-24 15:12:25 driver-btm-api.c:2415:bitmain_soc_init: opt_bitmain_work_mode = 0
    2020-05-24 15:12:25 driver-btm-api.c:2416:bitmain_soc_init: Miner compile time: Tue Apr 7 14:11:08 CST 2020 type: Antminer S17+
    2020-05-24 15:12:25 driver-btm-api.c:2417:bitmain_soc_init: commit version: 0fa7066 2020-04-06 22:14:32, build by: lol 2020-04-07 14:17:53
    2020-05-24 15:12:25 driver-btm-api.c:2045:show_sn: len:16, 814c84242b10481c
    2020-05-24 15:12:25 driver-btm-api.c:2423:bitmain_soc_init: show sn return 1
    2020-05-24 15:12:25 driver-btm-api.c:2065:handle_sn_for_factory_mode: show sn return 1
    2020-05-24 15:12:25 driver-btm-api.c:2103:handle_sn_for_factory_mode: read sn success, 814c84242b10481c
    2020-05-24 15:12:25 fan.c:279:front_fan_power_on: Note: front fan is power on!
    2020-05-24 15:12:25 fan.c:291:rear_fan_power_on: Note: rear fan is power on!
    2020-05-24 15:12:25 driver-btm-api.c:1276:miner_device_init: Detect 256MB control board of XILINX
    2020-05-24 15:12:25 driver-btm-api.c:1217:init_fan_parameter: fan_eft : 0 fan_pwm : 0
    2020-05-24 15:12:31 driver-btm-api.c:1201:init_miner_version: miner ID : 814c84242b10481c
    2020-05-24 15:12:31 driver-btm-api.c:1207:init_miner_version: FPGA Version = 0xB023
    2020-05-24 15:12:37 driver-btm-api.c:799:get_product_id: product_id[0] = 0
    2020-05-24 15:12:37 driver-btm-api.c:799:get_product_id: product_id[1] = 0
    2020-05-24 15:12:37 driver-btm-api.c:799:get_product_id: product_id[2] = 0
    2020-05-24 15:12:37 driver-btm-api.c:2196:update_conf_by_power_feedback: Power feedback is disabled
    2020-05-24 15:12:37 driver-btm-api.c:2164:get_calibration_voltage: calibration voltage flag is error data.
    2020-05-24 15:12:37 driver-btm-api.c:2230:update_conf_by_power_feedback: Note: no calibration voltage, default diff = 0
    2020-05-24 15:12:37 frequency.c:1366:adjust_higer_max_vol_table: adjust_higer_max_vol_table, adjust_vol = 0
    2020-05-24 15:12:37 thread.c:1066:create_read_nonce_reg_thread: create thread
    2020-05-24 15:12:43 driver-btm-api.c:1201:init_miner_version: miner ID : 814c84242b10481c
    2020-05-24 15:12:43 driver-btm-api.c:1207:init_miner_version: FPGA Version = 0xB023
    2020-05-24 15:12:48 driver-btm-api.c:799:get_product_id: product_id[0] = 0
    2020-05-24 15:12:48 driver-btm-api.c:799:get_product_id: product_id[1] = 0
    2020-05-24 15:12:48 driver-btm-api.c:799:get_product_id: product_id[2] = 0
    2020-05-24 15:12:48 driver-btm-api.c:754:_set_project_type: project:0
    2020-05-24 15:12:48 driver-btm-api.c:775:_set_project_type: Project type: Antminer S17+
    2020-05-24 15:12:48 driver-btm-api.c:786:dump_pcb_bom_version: Chain [0] PCB Version: 0x0100
    2020-05-24 15:12:48 driver-btm-api.c:787:dump_pcb_bom_version: Chain [0] BOM Version: 0x0100
    2020-05-24 15:12:48 driver-btm-api.c:786:dump_pcb_bom_version: Chain [1] PCB Version: 0x0100
    2020-05-24 15:12:48 driver-btm-api.c:787:dump_pcb_bom_version: Chain [1] BOM Version: 0x0100
    2020-05-24 15:12:48 driver-btm-api.c:786:dump_pcb_bom_version: Chain [2] PCB Version: 0x0100
    2020-05-24 15:12:48 driver-btm-api.c:787:dump_pcb_bom_version: Chain [2] BOM Version: 0x0100
    2020-05-24 15:12:50 driver-btm-api.c:2334:bitmain_board_init: Fan check passed.
    2020-05-24 15:12:51 board.c:36:jump_and_app_check_restore_pic: chain[0] PIC jump to app
    2020-05-24 15:12:53 board.c:40:jump_and_app_check_restore_pic: Check chain[0] PIC fw version=0x88
    2020-05-24 15:12:54 board.c:36:jump_and_app_check_restore_pic: chain[1] PIC jump to app
    2020-05-24 15:12:56 board.c:40:jump_and_app_check_restore_pic: Check chain[1] PIC fw version=0x88
    2020-05-24 15:12:57 board.c:36:jump_and_app_check_restore_pic: chain[2] PIC jump to app
    2020-05-24 15:12:59 board.c:40:jump_and_app_check_restore_pic: Check chain[2] PIC fw version=0x88
    2020-05-24 15:12:59 thread.c:1061:create_pic_heart_beat_thread: create thread
    2020-05-24 15:12:59 power_api.c:213:power_init: Power init:
    2020-05-24 15:12:59 power_api.c:214:power_init: current_voltage_raw = 0
    2020-05-24 15:12:59 power_api.c:215:power_init: highest_voltage_raw = 2100
    2020-05-24 15:12:59 power_api.c:216:power_init: working_voltage_raw = 1950
    2020-05-24 15:12:59 power_api.c:217:power_init: higher_voltage_raw = 2040
    2020-05-24 15:12:59 power_api.c:218:power_init: check_asic_voltage_raw = 2100
    2020-05-24 15:12:59 driver-btm-api.c:2344:bitmain_board_init: Enter 30s sleep to make sure power release finish.
    2020-05-24 15:12:59 power_api.c:186:power_off: init gpio907
    2020-05-24 15:13:31 power_api.c:324:set_to_highest_voltage_by_steps: Set to voltage raw 2100, step by step.
    2020-05-24 15:13:57 power_api.c:85:check_voltage_multi: retry time: 0
    2020-05-24 15:13:58 power_api.c:40:_get_avg_voltage: chain = 0, voltage = 21.230967
    2020-05-24 15:13:59 power_api.c:40:_get_avg_voltage: chain = 1, voltage = 21.154640
    2020-05-24 15:14:00 power_api.c:40:_get_avg_voltage: chain = 2, voltage = 21.230967
    2020-05-24 15:14:00 power_api.c:53:_get_avg_voltage: average_voltage = 21.205525
    2020-05-24 15:14:00 power_api.c:71:check_voltage: target_vol = 21.00, actural_vol = 21.21, check voltage passed.
    2020-05-24 15:14:00 uart.c:72:set_baud: set fpga_baud to 115200
    2020-05-24 15:14:11 driver-btm-api.c:1096:check_asic_number_with_power_on: Chain[0]: find 0 asic, times 0
    2020-05-24 15:14:22 driver-btm-api.c:1096:check_asic_number_with_power_on: Chain[0]: find 0 asic, times 1
    2020-05-24 15:14:33 driver-btm-api.c:1096:check_asic_number_with_power_on: Chain[0]: find 0 asic, times 2
    2020-05-24 15:14:33 power_api.c:380:modify_check_asic_voltage: check_asic_voltage_raw = 2100
    chain 0, IO_DRIVE_STRENGTH_CONFIGURATION reg = 0x f1fffff
    2020-05-24 15:14:42 driver-btm-api.c:1119:check_asic_number_with_power_on: Chain[0]: find 0 asic, times 3
    2020-05-24 15:14:42 power_api.c:380:modify_check_asic_voltage: check_asic_voltage_raw = 2050
    2020-05-24 15:14:42 power_api.c:364:set_to_check_asic_voltage_by_steps: Set to voltage raw 2050, step by step.
    2020-05-24 15:14:45 power_api.c:85:check_voltage_multi: retry time: 0
    2020-05-24 15:14:47 power_api.c:40:_get_avg_voltage: chain = 0, voltage = 20.689434
    2020-05-24 15:14:48 power_api.c:40:_get_avg_voltage: chain = 1, voltage = 20.640465
    2020-05-24 15:14:49 power_api.c:40:_get_avg_voltage: chain = 2, voltage = 20.742894
    2020-05-24 15:14:49 power_api.c:53:_get_avg_voltage: average_voltage = 20.690931
    2020-05-24 15:14:49 power_api.c:71:check_voltage: target_vol = 20.50, actural_vol = 20.69, check voltage passed.
    chain 0, IO_DRIVE_STRENGTH_CONFIGURATION reg = 0x f1fffff
    2020-05-24 15:14:58 driver-btm-api.c:1119:check_asic_number_with_power_on: Chain[0]: find 0 asic, times 4
    2020-05-24 15:14:58 power_api.c:380:modify_check_asic_voltage: check_asic_voltage_raw = 2000
    2020-05-24 15:14:58 power_api.c:364:set_to_check_asic_voltage_by_steps: Set to voltage raw 2000, step by step.
    2020-05-24 15:15:01 power_api.c:85:check_voltage_multi: retry time: 0
    2020-05-24 15:15:03 power_api.c:40:_get_avg_voltage: chain = 0, voltage = 20.199743
    2020-05-24 15:15:04 power_api.c:40:_get_avg_voltage: chain = 1, voltage = 20.150774
    2020-05-24 15:15:05 power_api.c:40:_get_avg_voltage: chain = 2, voltage = 20.251938
    2020-05-24 15:15:05 power_api.c:53:_get_avg_voltage: average_voltage = 20.200818
    2020-05-24 15:15:05 power_api.c:71:check_voltage: target_vol = 20.00, actural_vol = 20.20, check voltage passed.
    chain 0, IO_DRIVE_STRENGTH_CONFIGURATION reg = 0x f1fffff
    2020-05-24 15:15:13 driver-btm-api.c:1119:check_asic_number_with_power_on: Chain[0]: find 0 asic, times 5
    2020-05-24 15:15:13 power_api.c:380:modify_check_asic_voltage: check_asic_voltage_raw = 2100
    2020-05-24 15:15:13 power_api.c:364:set_to_check_asic_voltage_by_steps: Set to voltage raw 2100, step by step.
    2020-05-24 15:15:18 power_api.c:85:check_voltage_multi: retry time: 0
    2020-05-24 15:15:20 power_api.c:40:_get_avg_voltage: chain = 0, voltage = 21.179125
    2020-05-24 15:15:21 power_api.c:40:_get_avg_voltage: chain = 1, voltage = 21.130155
    2020-05-24 15:15:22 power_api.c:40:_get_avg_voltage: chain = 2, voltage = 21.233850
    2020-05-24 15:15:22 power_api.c:53:_get_avg_voltage: average_voltage = 21.181043
    2020-05-24 15:15:22 power_api.c:71:check_voltage: target_vol = 21.00, actural_vol = 21.18, check voltage passed.
    2020-05-24 15:15:22 driver-btm-api.c:1155:check_asic_number: Chain 0 only find 0 asic, will power off hash board 0
    2020-05-24 15:15:23 driver-btm-api.c:1157:check_asic_number: Chain 0 voltage: an0 = 2.800000, an2 2.790323, an6 2.503226.
    2020-05-24 15:15:35 driver-btm-api.c:1096:check_asic_number_with_power_on: Chain[1]: find 0 asic, times 0
    2020-05-24 15:15:45 driver-btm-api.c:1096:check_asic_number_with_power_on: Chain[1]: find 0 asic, times 1
    2020-05-24 15:15:56 driver-btm-api.c:1096:check_asic_number_with_power_on: Chain[1]: find 0 asic, times 2
    2020-05-24 15:15:56 power_api.c:380:modify_check_asic_voltage: check_asic_voltage_raw = 2100
    chain 1, IO_DRIVE_STRENGTH_CONFIGURATION reg = 0x f1fffff
    2020-05-24 15:16:05 driver-btm-api.c:1119:check_asic_number_with_power_on: Chain[1]: find 0 asic, times 3
    2020-05-24 15:16:05 power_api.c:380:modify_check_asic_voltage: check_asic_voltage_raw = 2050
    2020-05-24 15:16:05 power_api.c:364:set_to_check_asic_voltage_by_steps: Set to voltage raw 2050, step by step.
    2020-05-24 15:16:08 power_api.c:85:check_voltage_multi: retry time: 0
    2020-05-24 15:16:09 power_api.c:40:_get_avg_voltage: chain = 1, voltage = 20.613899
    2020-05-24 15:16:10 power_api.c:40:_get_avg_voltage: chain = 2, voltage = 20.716129
    2020-05-24 15:16:10 power_api.c:53:_get_avg_voltage: average_voltage = 20.665014
    2020-05-24 15:16:10 power_api.c:71:check_voltage: target_vol = 20.50, actural_vol = 20.67, check voltage passed.
    chain 1, IO_DRIVE_STRENGTH_CONFIGURATION reg = 0x f1fffff
    2020-05-24 15:16:19 driver-btm-api.c:1119:check_asic_number_with_power_on: Chain[1]: find 0 asic, times 4
    2020-05-24 15:16:19 power_api.c:380:modify_check_asic_voltage: check_asic_voltage_raw = 2000
    2020-05-24 15:16:19 power_api.c:364:set_to_check_asic_voltage_by_steps: Set to voltage raw 2000, step by step.
    2020-05-24 15:16:22 power_api.c:85:check_voltage_multi: retry time: 0
    2020-05-24 15:16:24 power_api.c:40:_get_avg_voltage: chain = 1, voltage = 20.124839
    2020-05-24 15:16:25 power_api.c:40:_get_avg_voltage: chain = 2, voltage = 20.251938
    2020-05-24 15:16:25 power_api.c:53:_get_avg_voltage: average_voltage = 20.188388
    2020-05-24 15:16:25 power_api.c:71:check_voltage: target_vol = 20.00, actural_vol = 20.19, check voltage passed.
    chain 1, IO_DRIVE_STRENGTH_CONFIGURATION reg = 0x f1fffff
    2020-05-24 15:16:33 driver-btm-api.c:1119:check_asic_number_with_power_on: Chain[1]: find 0 asic, times 5
    2020-05-24 15:16:33 power_api.c:380:modify_check_asic_voltage: check_asic_voltage_raw = 2100
    2020-05-24 15:16:33 power_api.c:364:set_to_check_asic_voltage_by_steps: Set to voltage raw 2100, step by step.
    2020-05-24 15:16:38 power_api.c:85:check_voltage_multi: retry time: 0
    2020-05-24 15:16:39 power_api.c:40:_get_avg_voltage: chain = 1, voltage = 21.102960
    2020-05-24 15:16:41 power_api.c:40:_get_avg_voltage: chain = 2, voltage = 21.258398
    2020-05-24 15:16:41 power_api.c:53:_get_avg_voltage: average_voltage = 21.180679
    2020-05-24 15:16:41 power_api.c:71:check_voltage: target_vol = 21.00, actural_vol = 21.18, check voltage passed.
    2020-05-24 15:16:41 driver-btm-api.c:1155:check_asic_number: Chain 1 only find 0 asic, will power off hash board 1
    2020-05-24 15:16:42 driver-btm-api.c:1157:check_asic_number: Chain 1 voltage: an0 = 2.783871, an2 2.783871, an6 2.506452.
    2020-05-24 15:16:53 driver-btm-api.c:1096:check_asic_number_with_power_on: Chain[2]: find 0 asic, times 0
    2020-05-24 15:17:04 driver-btm-api.c:1096:check_asic_number_with_power_on: Chain[2]: find 0 asic, times 1
    2020-05-24 15:17:15 driver-btm-api.c:1096:check_asic_number_with_power_on: Chain[2]: find 0 asic, times 2
    2020-05-24 15:17:15 power_api.c:380:modify_check_asic_voltage: check_asic_voltage_raw = 2100
    chain 2, IO_DRIVE_STRENGTH_CONFIGURATION reg = 0x f1fffff
    2020-05-24 15:17:24 driver-btm-api.c:1119:check_asic_number_with_power_on: Chain[2]: find 0 asic, times 3
    2020-05-24 15:17:24 power_api.c:380:modify_check_asic_voltage: check_asic_voltage_raw = 2050
    2020-05-24 15:17:24 power_api.c:364:set_to_check_asic_voltage_by_steps: Set to voltage raw 2050, step by step.
    2020-05-24 15:17:27 power_api.c:85:check_voltage_multi: retry time: 0
    2020-05-24 15:17:28 power_api.c:40:_get_avg_voltage: chain = 2, voltage = 20.689434
    2020-05-24 15:17:28 power_api.c:53:_get_avg_voltage: average_voltage = 20.689434
    2020-05-24 15:17:28 power_api.c:71:check_voltage: target_vol = 20.50, actural_vol = 20.69, check voltage passed.
    chain 2, IO_DRIVE_STRENGTH_CONFIGURATION reg = 0x f1fffff
    2020-05-24 15:17:37 driver-btm-api.c:1119:check_asic_number_with_power_on: Chain[2]: find 0 asic, times 4
    2020-05-24 15:17:37 power_api.c:380:modify_check_asic_voltage: check_asic_voltage_raw = 2000
    2020-05-24 15:17:37 power_api.c:364:set_to_check_asic_voltage_by_steps: Set to voltage raw 2000, step by step.
    2020-05-24 15:17:40 power_api.c:85:check_voltage_multi: retry time: 0
    2020-05-24 15:17:42 power_api.c:40:_get_avg_voltage: chain = 2, voltage = 20.199743
    2020-05-24 15:17:42 power_api.c:53:_get_avg_voltage: average_voltage = 20.199743
    2020-05-24 15:17:42 power_api.c:71:check_voltage: target_vol = 20.00, actural_vol = 20.20, check voltage passed.
    chain 2, IO_DRIVE_STRENGTH_CONFIGURATION reg = 0x f1fffff
    2020-05-24 15:17:51 driver-btm-api.c:1119:check_asic_number_with_power_on: Chain[2]: find 0 asic, times 5
    2020-05-24 15:17:51 power_api.c:380:modify_check_asic_voltage: check_asic_voltage_raw = 2100
    2020-05-24 15:17:51 power_api.c:364:set_to_check_asic_voltage_by_steps: Set to voltage raw 2100, step by step.
    2020-05-24 15:17:56 power_api.c:85:check_voltage_multi: retry time: 0
    2020-05-24 15:17:57 power_api.c:40:_get_avg_voltage: chain = 2, voltage = 21.203609
    2020-05-24 15:17:57 power_api.c:53:_get_avg_voltage: average_voltage = 21.203609
    2020-05-24 15:17:57 power_api.c:71:check_voltage: target_vol = 21.00, actural_vol = 21.20, check voltage passed.
    2020-05-24 15:17:57 driver-btm-api.c:1155:check_asic_number: Chain 2 only find 0 asic, will power off hash board 2
    2020-05-24 15:17:58 driver-btm-api.c:1157:check_asic_number: Chain 2 voltage: an0 = 2.796774, an2 2.790323, an6 2.503226.
    2020-05-24 15:17:59 driver-btm-api.c:216:set_miner_status: ERROR_SOC_INIT
    2020-05-24 15:17:59 driver-btm-api.c:156:stop_mining: stop mining: soc init failed!
    2020-05-24 15:17:59 thread.c:1101:cancel_read_nonce_reg_thread: cancel thread
    2020-05-24 15:17:59 driver-btm-api.c:141:killall_hashboard: ****power off hashboard****

     

    in me s17 #2 i already open it, just to reconnect all cables, power cables and data cables for and to control board, nothing more, and nothing...

     

    here its the log of kernel of my s17 #2

    Booting Linux on physical CPU 0x0
    Linux version 4.6.0-xilinx-gff8137b-dirty (lzq@armdev2) (gcc version 4.8.3 20140320 (prerelease) (Sourcery CodeBench Lite 2014.05-23) ) #25 SMP PREEMPT Fri Nov 23 15:30:52 CST 2018
    CPU: ARMv7 Processor [413fc090] revision 0 (ARMv7), cr=18c5387d
    CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
    Machine model: Xilinx Zynq
    cma: Reserved 16 MiB at 0x0e000000
    Memory policy: Data cache writealloc
    On node 0 totalpages: 61440
    free_area_init_node: node 0, pgdat c0b39280, node_mem_map cde10000
    Normal zone: 480 pages used for memmap
    Normal zone: 0 pages reserved
    Normal zone: 61440 pages, LIFO batch:15
    percpu: Embedded 12 pages/cpu @cddf1000 s19776 r8192 d21184 u49152
    pcpu-alloc: s19776 r8192 d21184 u49152 alloc=12*4096
    pcpu-alloc: [0] 0 [0] 1
    Built 1 zonelists in Zone order, mobility grouping on. Total pages: 60960
    Kernel command line: mem=240M console=ttyPS0,115200 ramdisk_size=33554432 root=/dev/ram rw earlyprintk
    PID hash table entries: 1024 (order: 0, 4096 bytes)
    Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
    Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
    Memory: 203444K/245760K available (6345K kernel code, 231K rwdata, 1896K rodata, 1024K init, 223K bss, 25932K reserved, 16384K cma-reserved, 0K highmem)
    Virtual kernel memory layout:
    vector : 0xffff0000 - 0xffff1000 ( 4 kB)
    fixmap : 0xffc00000 - 0xfff00000 (3072 kB)
    vmalloc : 0xcf800000 - 0xff800000 ( 768 MB)
    lowmem : 0xc0000000 - 0xcf000000 ( 240 MB)
    pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
    modules : 0xbf000000 - 0xbfe00000 ( 14 MB)
    .text : 0xc0008000 - 0xc090c424 (9234 kB)
    .init : 0xc0a00000 - 0xc0b00000 (1024 kB)
    .data : 0xc0b00000 - 0xc0b39fe0 ( 232 kB)
    .bss : 0xc0b39fe0 - 0xc0b71c28 ( 224 kB)
    Preemptible hierarchical RCU implementation.
    Build-time adjustment of leaf fanout to 32.
    RCU restricting CPUs from NR_CPUS=4 to nr_cpu_ids=2.
    RCU: Adjusting geometry for rcu_fanout_leaf=32, nr_cpu_ids=2
    NR_IRQS:16 nr_irqs:16 16
    efuse mapped to cf800000
    ps7-slcr mapped to cf802000
    L2C: platform modifies aux control register: 0x72360000 -> 0x72760000
    L2C: DT/platform modifies aux control register: 0x72360000 -> 0x72760000
    L2C-310 erratum 769419 enabled
    L2C-310 enabling early BRESP for Cortex-A9
    L2C-310 full line of zeros enabled for Cortex-A9
    L2C-310 ID prefetch enabled, offset 1 lines
    L2C-310 dynamic clock gating enabled, standby mode enabled
    L2C-310 cache controller enabled, 8 ways, 512 kB
    L2C-310: CACHE_ID 0x410000c8, AUX_CTRL 0x76760001
    zynq_clock_init: clkc starts at cf802100
    Zynq clock init
    sched_clock: 64 bits at 333MHz, resolution 3ns, wraps every 4398046511103ns
    clocksource: arm_global_timer: mask: 0xffffffffffffffff max_cycles: 0x4ce07af025, max_idle_ns: 440795209040 ns
    Switching to timer-based delay loop, resolution 3ns
    clocksource: ttc_clocksource: mask: 0xffff max_cycles: 0xffff, max_idle_ns: 537538477 ns
    ps7-ttc #0 at cf80a000, irq=18
    Console: colour dummy device 80x30
    Calibrating delay loop (skipped), value calculated using timer frequency.. 666.66 BogoMIPS (lpj=3333333)
    pid_max: default: 32768 minimum: 301
    Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
    Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
    CPU: Testing write buffer coherency: ok
    CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
    Setting up static identity map for 0x100000 - 0x100058
    CPU1: failed to boot: -1
    Brought up 1 CPUs
    SMP: Total of 1 processors activated (666.66 BogoMIPS).
    CPU: All CPU(s) started in SVC mode.
    devtmpfs: initialized
    VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 4
    clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
    pinctrl core: initialized pinctrl subsystem
    NET: Registered protocol family 16
    DMA: preallocated 256 KiB pool for atomic coherent allocations
    cpuidle: using governor menu
    hw-breakpoint: found 5 (+1 reserved) breakpoint and 1 watchpoint registers.
    hw-breakpoint: maximum watchpoint size is 4 bytes.
    zynq-ocm f800c000.ps7-ocmc: ZYNQ OCM pool: 256 KiB @ 0xcf880000
    vgaarb: loaded
    SCSI subsystem initialized
    usbcore: registered new interface driver usbfs
    usbcore: registered new interface driver hub
    usbcore: registered new device driver usb
    media: Linux media interface: v0.10
    Linux video capture interface: v2.00
    pps_core: LinuxPPS API ver. 1 registered
    pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
    PTP clock support registered
    EDAC MC: Ver: 3.0.0
    Advanced Linux Sound Architecture Driver Initialized.
    clocksource: Switched to clocksource arm_global_timer
    NET: Registered protocol family 2
    TCP established hash table entries: 2048 (order: 1, 8192 bytes)
    TCP bind hash table entries: 2048 (order: 2, 16384 bytes)
    TCP: Hash tables configured (established 2048 bind 2048)
    UDP hash table entries: 256 (order: 1, 8192 bytes)
    UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
    NET: Registered protocol family 1
    RPC: Registered named UNIX socket transport module.
    RPC: Registered udp transport module.
    RPC: Registered tcp transport module.
    RPC: Registered tcp NFSv4.1 backchannel transport module.
    PCI: CLS 0 bytes, default 64
    Trying to unpack rootfs image as initramfs...
    rootfs image is not initramfs (no cpio magic); looks like an initrd
    Freeing initrd memory: 12892K (cce6a000 - cdb01000)
    hw perfevents: enabled with armv7_cortex_a9 PMU driver, 7 counters available
    futex hash table entries: 512 (order: 3, 32768 bytes)
    workingset: timestamp_bits=28 max_order=16 bucket_order=0
    jffs2: version 2.2. (NAND) (SUMMARY) © 2001-2006 Red Hat, Inc.
    io scheduler noop registered
    io scheduler deadline registered
    io scheduler cfq registered (default)
    dma-pl330 f8003000.ps7-dma: Loaded driver for PL330 DMAC-241330
    dma-pl330 f8003000.ps7-dma: DBUFF-128x8bytes Num_Chans-8 Num_Peri-4 Num_Events-16
    e0000000.serial: ttyPS0 at MMIO 0xe0000000 (irq = 158, base_baud = 6249999) is a xuartps
    console [ttyPS0] enabled
    xdevcfg f8007000.ps7-dev-cfg: ioremap 0xf8007000 to cf86e000
    [drm] Initialized drm 1.1.0 20060810
    brd: module loaded
    loop: module loaded
    CAN device driver interface
    gpiod_set_value: invalid GPIO
    libphy: MACB_mii_bus: probed
    macb e000b000.ethernet eth0: Cadence GEM rev 0x00020118 at 0xe000b000 irq 31 (00:0a:35:00:00:00)
    Generic PHY e000b000.etherne:00: attached PHY driver [Generic PHY] (mii_bus:phy_addr=e000b000.etherne:00, irq=-1)
    e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k
    e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
    ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
    ehci-pci: EHCI PCI platform driver
    usbcore: registered new interface driver usb-storage
    mousedev: PS/2 mouse device common for all mice
    i2c /dev entries driver
    Xilinx Zynq CpuIdle Driver started
    sdhci: Secure Digital Host Controller Interface driver
    sdhci: Copyright(c) Pierre Ossman
    sdhci-pltfm: SDHCI platform and OF driver helper
    mmc0: SDHCI controller on e0100000.ps7-sdio [e0100000.ps7-sdio] using ADMA
    ledtrig-cpu: registered to indicate activity on CPUs
    usbcore: registered new interface driver usbhid
    usbhid: USB HID core driver
    nand: device found, Manufacturer ID: 0x2c, Chip ID: 0xda
    nand: Micron MT29F2G08ABAEAWP
    nand: 256 MiB, SLC, erase size: 128 KiB, page size: 2048, OOB size: 64
    nand: WARNING: pl35x-nand: the ECC used on your system is too weak compared to the one required by the NAND chip
    Bad block table found at page 131008, version 0x01
    Bad block table found at page 130944, version 0x01
    6 ofpart partitions found on MTD device pl35x-nand
    Creating 6 MTD partitions on "pl35x-nand":
    0x000000000000-0x000002800000 : "BOOT.bin-env-dts-kernel"
    0x000002800000-0x000004800000 : "ramfs"
    0x000004800000-0x000005000000 : "configs"
    0x000005000000-0x000006000000 : "reserve"
    0x000006000000-0x000008000000 : "ramfs-bak"
    0x000008000000-0x000010000000 : "reserve1"
    NET: Registered protocol family 10
    sit: IPv6 over IPv4 tunneling driver
    NET: Registered protocol family 17
    can: controller area network core (rev 20120528 abi 9)
    NET: Registered protocol family 29
    can: raw protocol (rev 20120528)
    can: broadcast manager protocol (rev 20120528 t)
    can: netlink gateway (rev 20130117) max_hops=1
    zynq_pm_ioremap: no compatible node found for 'xlnx,zynq-ddrc-a05'
    zynq_pm_late_init: Unable to map DDRC IO memory.
    Registering SWP/SWPB emulation handler
    hctosys: unable to open rtc device (rtc0)
    ALSA device list:
    No soundcards found.
    RAMDISK: gzip image found at block 0
    EXT4-fs (ram0): couldn't mount as ext3 due to feature incompatibilities
    EXT4-fs (ram0): mounted filesystem without journal. Opts: (null)
    VFS: Mounted root (ext4 filesystem) on device 1:0.
    devtmpfs: mounted
    Freeing unused kernel memory: 1024K (c0a00000 - c0b00000)
    EXT4-fs (ram0): re-mounted. Opts: block_validity,delalloc,barrier,user_xattr
    random: dd urandom read with 0 bits of entropy available
    ubi0: attaching mtd2
    ubi0: scanning is finished
    ubi0: attached mtd2 (name "configs", size 8 MiB)
    ubi0: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes
    ubi0: min./max. I/O unit sizes: 2048/2048, sub-page size 2048
    ubi0: VID header offset: 2048 (aligned 2048), data offset: 4096
    ubi0: good PEBs: 64, bad PEBs: 0, corrupted PEBs: 0
    ubi0: user volume: 1, internal volumes: 1, max. volumes count: 128
    ubi0: max/mean erase counter: 47/16, WL threshold: 4096, image sequence number: 262741923
    ubi0: available PEBs: 0, total reserved PEBs: 64, PEBs reserved for bad PEB handling: 40
    ubi0: background thread "ubi_bgt0d" started, PID 708
    UBIFS (ubi0:0): background thread "ubifs_bgt0_0" started, PID 711
    UBIFS (ubi0:0): recovery needed
    UBIFS (ubi0:0): recovery completed
    UBIFS (ubi0:0): UBIFS: mounted UBI device 0, volume 0, name "configs"
    UBIFS (ubi0:0): LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
    UBIFS (ubi0:0): FS size: 1396736 bytes (1 MiB, 11 LEBs), journal size 888833 bytes (0 MiB, 5 LEBs)
    UBIFS (ubi0:0): reserved for root: 65970 bytes (64 KiB)
    UBIFS (ubi0:0): media format: w4/r0 (latest is w4/r0), UUID A9E8BDA4-70DE-45D9-83BE-2DD9F129C0C6, small LPT model
    ubi1: attaching mtd5
    ubi1: scanning is finished
    ubi1: attached mtd5 (name "reserve1", size 128 MiB)
    ubi1: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes
    ubi1: min./max. I/O unit sizes: 2048/2048, sub-page size 2048
    ubi1: VID header offset: 2048 (aligned 2048), data offset: 4096
    ubi1: good PEBs: 1020, bad PEBs: 4, corrupted PEBs: 0
    ubi1: user volume: 1, internal volumes: 1, max. volumes count: 128
    ubi1: max/mean erase counter: 102/32, WL threshold: 4096, image sequence number: 3563076859
    ubi1: available PEBs: 0, total reserved PEBs: 1020, PEBs reserved for bad PEB handling: 36
    ubi1: background thread "ubi_bgt1d" started, PID 720
    UBIFS (ubi1:0): background thread "ubifs_bgt1_0" started, PID 723
    UBIFS (ubi1:0): recovery needed
    UBIFS (ubi1:0): recovery completed
    UBIFS (ubi1:0): UBIFS: mounted UBI device 1, volume 0, name "reserve1"
    UBIFS (ubi1:0): LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
    UBIFS (ubi1:0): FS size: 123039744 bytes (117 MiB, 969 LEBs), journal size 6221824 bytes (5 MiB, 49 LEBs)
    UBIFS (ubi1:0): reserved for root: 4952683 bytes (4836 KiB)
    UBIFS (ubi1:0): media format: w4/r0 (latest is w4/r0), UUID A21581E4-693A-4BBF-A66A-FCE5ACD2EF7F, small LPT model
    IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
    IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
    macb e000b000.ethernet eth0: unable to generate target frequency: 25000000 Hz
    macb e000b000.ethernet eth0: link up (100/Full)
    IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
    In axi fpga driver!
    request_mem_region OK!
    AXI fpga dev virtual address is 0xcfb38000
    *base_vir_addr = 0xb023
    In fpga mem driver!
    request_mem_region OK!
    fpga mem virtual address is 0xd2000000
    random: nonblocking pool is initialized
    2020-05-24 15:42:45 driver-btm-api.c:741:init_freq_mode: This is scan-user version
    2020-05-24 15:42:45 driver-btm-api.c:2413:bitmain_soc_init: opt_multi_version = 1
    2020-05-24 15:42:45 driver-btm-api.c:2414:bitmain_soc_init: opt_bitmain_ab = 1
    2020-05-24 15:42:45 driver-btm-api.c:2415:bitmain_soc_init: opt_bitmain_work_mode = 0
    2020-05-24 15:42:45 driver-btm-api.c:2416:bitmain_soc_init: Miner compile time: Tue Apr 7 14:11:08 CST 2020 type: Antminer S17+
    2020-05-24 15:42:45 driver-btm-api.c:2417:bitmain_soc_init: commit version: 0fa7066 2020-04-06 22:14:32, build by: lol 2020-04-07 14:17:53
    2020-05-24 15:42:45 driver-btm-api.c:2045:show_sn: len:16, 8022f44a7910481c
    2020-05-24 15:42:45 driver-btm-api.c:2423:bitmain_soc_init: show sn return 1
    2020-05-24 15:42:45 driver-btm-api.c:2065:handle_sn_for_factory_mode: show sn return 1
    2020-05-24 15:42:45 driver-btm-api.c:2103:handle_sn_for_factory_mode: read sn success, 8022f44a7910481c
    2020-05-24 15:42:45 fan.c:279:front_fan_power_on: Note: front fan is power on!
    2020-05-24 15:42:45 fan.c:291:rear_fan_power_on: Note: rear fan is power on!
    2020-05-24 15:42:45 driver-btm-api.c:1276:miner_device_init: Detect 256MB control board of XILINX
    2020-05-24 15:42:45 driver-btm-api.c:1217:init_fan_parameter: fan_eft : 0 fan_pwm : 0
    2020-05-24 15:42:51 driver-btm-api.c:1201:init_miner_version: miner ID : 8022f44a7910481c
    2020-05-24 15:42:51 driver-btm-api.c:1207:init_miner_version: FPGA Version = 0xB023
    2020-05-24 15:42:56 driver-btm-api.c:799:get_product_id: product_id[0] = 0
    2020-05-24 15:42:56 driver-btm-api.c:799:get_product_id: product_id[1] = 0
    2020-05-24 15:42:56 driver-btm-api.c:799:get_product_id: product_id[2] = 0
    2020-05-24 15:42:56 driver-btm-api.c:2196:update_conf_by_power_feedback: Power feedback is disabled
    2020-05-24 15:42:56 driver-btm-api.c:2164:get_calibration_voltage: calibration voltage flag is error data.
    2020-05-24 15:42:56 driver-btm-api.c:2230:update_conf_by_power_feedback: Note: no calibration voltage, default diff = 0
    2020-05-24 15:42:56 frequency.c:1366:adjust_higer_max_vol_table: adjust_higer_max_vol_table, adjust_vol = 0
    2020-05-24 15:42:56 thread.c:1066:create_read_nonce_reg_thread: create thread
    2020-05-24 15:43:02 driver-btm-api.c:1201:init_miner_version: miner ID : 8022f44a7910481c
    2020-05-24 15:43:02 driver-btm-api.c:1207:init_miner_version: FPGA Version = 0xB023
    2020-05-24 15:43:07 driver-btm-api.c:799:get_product_id: product_id[0] = 0
    2020-05-24 15:43:07 driver-btm-api.c:799:get_product_id: product_id[1] = 0
    2020-05-24 15:43:07 driver-btm-api.c:799:get_product_id: product_id[2] = 0
    2020-05-24 15:43:07 driver-btm-api.c:754:_set_project_type: project:0
    2020-05-24 15:43:07 driver-btm-api.c:775:_set_project_type: Project type: Antminer S17+
    2020-05-24 15:43:07 driver-btm-api.c:786:dump_pcb_bom_version: Chain [0] PCB Version: 0x0100
    2020-05-24 15:43:07 driver-btm-api.c:787:dump_pcb_bom_version: Chain [0] BOM Version: 0x0100
    2020-05-24 15:43:07 driver-btm-api.c:786:dump_pcb_bom_version: Chain [1] PCB Version: 0x0100
    2020-05-24 15:43:07 driver-btm-api.c:787:dump_pcb_bom_version: Chain [1] BOM Version: 0x0100
    2020-05-24 15:43:07 driver-btm-api.c:786:dump_pcb_bom_version: Chain [2] PCB Version: 0x0100
    2020-05-24 15:43:07 driver-btm-api.c:787:dump_pcb_bom_version: Chain [2] BOM Version: 0x0100
    2020-05-24 15:43:09 driver-btm-api.c:2334:bitmain_board_init: Fan check passed.
    2020-05-24 15:43:10 board.c:36:jump_and_app_check_restore_pic: chain[0] PIC jump to app
    2020-05-24 15:43:12 board.c:40:jump_and_app_check_restore_pic: Check chain[0] PIC fw version=0x88
    2020-05-24 15:43:14 board.c:36:jump_and_app_check_restore_pic: chain[1] PIC jump to app
    2020-05-24 15:43:16 board.c:40:jump_and_app_check_restore_pic: Check chain[1] PIC fw version=0x88
    2020-05-24 15:43:17 board.c:36:jump_and_app_check_restore_pic: chain[2] PIC jump to app
    2020-05-24 15:43:19 board.c:40:jump_and_app_check_restore_pic: Check chain[2] PIC fw version=0x88
    2020-05-24 15:43:19 thread.c:1061:create_pic_heart_beat_thread: create thread
    2020-05-24 15:43:19 power_api.c:213:power_init: Power init:
    2020-05-24 15:43:19 power_api.c:214:power_init: current_voltage_raw = 0
    2020-05-24 15:43:19 power_api.c:215:power_init: highest_voltage_raw = 2100
    2020-05-24 15:43:19 power_api.c:216:power_init: working_voltage_raw = 1950
    2020-05-24 15:43:19 power_api.c:217:power_init: higher_voltage_raw = 2040
    2020-05-24 15:43:19 power_api.c:218:power_init: check_asic_voltage_raw = 2100
    2020-05-24 15:43:19 driver-btm-api.c:2344:bitmain_board_init: Enter 30s sleep to make sure power release finish.
    2020-05-24 15:43:19 power_api.c:186:power_off: init gpio907
    2020-05-24 15:43:51 power_api.c:324:set_to_highest_voltage_by_steps: Set to voltage raw 2100, step by step.
    2020-05-24 15:44:17 power_api.c:85:check_voltage_multi: retry time: 0
    2020-05-24 15:44:18 power_api.c:40:_get_avg_voltage: chain = 0, voltage = 21.078880
    2020-05-24 15:44:19 power_api.c:40:_get_avg_voltage: chain = 1, voltage = 21.196951
    2020-05-24 15:44:20 power_api.c:40:_get_avg_voltage: chain = 2, voltage = 21.226752
    2020-05-24 15:44:20 power_api.c:53:_get_avg_voltage: average_voltage = 21.167528
    2020-05-24 15:44:20 power_api.c:71:check_voltage: target_vol = 21.00, actural_vol = 21.17, check voltage passed.
    2020-05-24 15:44:20 uart.c:72:set_baud: set fpga_baud to 115200
    2020-05-24 15:44:31 driver-btm-api.c:1096:check_asic_number_with_power_on: Chain[0]: find 0 asic, times 0
    2020-05-24 15:44:42 driver-btm-api.c:1096:check_asic_number_with_power_on: Chain[0]: find 0 asic, times 1
    2020-05-24 15:44:52 driver-btm-api.c:1096:check_asic_number_with_power_on: Chain[0]: find 0 asic, times 2
    2020-05-24 15:44:52 power_api.c:380:modify_check_asic_voltage: check_asic_voltage_raw = 2100
    chain 0, IO_DRIVE_STRENGTH_CONFIGURATION reg = 0x f1fffff
    2020-05-24 15:45:01 driver-btm-api.c:1119:check_asic_number_with_power_on: Chain[0]: find 0 asic, times 3
    2020-05-24 15:45:01 power_api.c:380:modify_check_asic_voltage: check_asic_voltage_raw = 2050
    2020-05-24 15:45:01 power_api.c:364:set_to_check_asic_voltage_by_steps: Set to voltage raw 2050, step by step.
    2020-05-24 15:45:04 power_api.c:85:check_voltage_multi: retry time: 0
    2020-05-24 15:45:07 power_api.c:40:_get_avg_voltage: chain = 0, voltage = 20.545108
    2020-05-24 15:45:08 power_api.c:40:_get_avg_voltage: chain = 1, voltage = 20.689962
    2020-05-24 15:45:09 power_api.c:40:_get_avg_voltage: chain = 2, voltage = 20.718472
    2020-05-24 15:45:09 power_api.c:53:_get_avg_voltage: average_voltage = 20.651181
    2020-05-24 15:45:09 power_api.c:71:check_voltage: target_vol = 20.50, actural_vol = 20.65, check voltage passed.
    chain 0, IO_DRIVE_STRENGTH_CONFIGURATION reg = 0x f1fffff
    2020-05-24 15:45:17 driver-btm-api.c:1119:check_asic_number_with_power_on: Chain[0]: find 0 asic, times 4
    2020-05-24 15:45:17 power_api.c:380:modify_check_asic_voltage: check_asic_voltage_raw = 2000
    2020-05-24 15:45:17 power_api.c:364:set_to_check_asic_voltage_by_steps: Set to voltage raw 2000, step by step.
    2020-05-24 15:45:21 power_api.c:85:check_voltage_multi: retry time: 0
    2020-05-24 15:45:22 power_api.c:40:_get_avg_voltage: chain = 0, voltage = 20.062262
    2020-05-24 15:45:23 power_api.c:40:_get_avg_voltage: chain = 1, voltage = 20.207116
    2020-05-24 15:45:24 power_api.c:40:_get_avg_voltage: chain = 2, voltage = 20.184478
    2020-05-24 15:45:24 power_api.c:53:_get_avg_voltage: average_voltage = 20.151285
    2020-05-24 15:45:24 power_api.c:71:check_voltage: target_vol = 20.00, actural_vol = 20.15, check voltage passed.
    chain 0, IO_DRIVE_STRENGTH_CONFIGURATION reg = 0x f1fffff
    2020-05-24 15:45:33 driver-btm-api.c:1119:check_asic_number_with_power_on: Chain[0]: find 0 asic, times 5
    2020-05-24 15:45:33 power_api.c:380:modify_check_asic_voltage: check_asic_voltage_raw = 2100
    2020-05-24 15:45:33 power_api.c:364:set_to_check_asic_voltage_by_steps: Set to voltage raw 2100, step by step.
    2020-05-24 15:45:38 power_api.c:85:check_voltage_multi: retry time: 0
    2020-05-24 15:45:39 power_api.c:40:_get_avg_voltage: chain = 0, voltage = 21.027955
    2020-05-24 15:45:40 power_api.c:40:_get_avg_voltage: chain = 1, voltage = 21.196951
    2020-05-24 15:45:41 power_api.c:40:_get_avg_voltage: chain = 2, voltage = 21.151399
    2020-05-24 15:45:41 power_api.c:53:_get_avg_voltage: average_voltage = 21.125435
    2020-05-24 15:45:41 power_api.c:71:check_voltage: target_vol = 21.00, actural_vol = 21.13, check voltage passed.
    2020-05-24 15:45:41 driver-btm-api.c:1155:check_asic_number: Chain 0 only find 0 asic, will power off hash board 0
    2020-05-24 15:45:42 driver-btm-api.c:1157:check_asic_number: Chain 0 voltage: an0 = 2.819355, an2 2.812903, an6 2.538710.
    2020-05-24 15:45:54 driver-btm-api.c:1096:check_asic_number_with_power_on: Chain[1]: find 65 asic, times 0
    2020-05-24 15:46:06 driver-btm-api.c:1096:check_asic_number_with_power_on: Chain[2]: find 0 asic, times 0
    2020-05-24 15:46:17 driver-btm-api.c:1096:check_asic_number_with_power_on: Chain[2]: find 0 asic, times 1
    2020-05-24 15:46:28 driver-btm-api.c:1096:check_asic_number_with_power_on: Chain[2]: find 0 asic, times 2
    2020-05-24 15:46:28 power_api.c:380:modify_check_asic_voltage: check_asic_voltage_raw = 2100
    chain 2, IO_DRIVE_STRENGTH_CONFIGURATION reg = 0x f1fffff
    2020-05-24 15:46:36 driver-btm-api.c:1119:check_asic_number_with_power_on: Chain[2]: find 0 asic, times 3
    2020-05-24 15:46:36 power_api.c:380:modify_check_asic_voltage: check_asic_voltage_raw = 2050
    2020-05-24 15:46:36 power_api.c:364:set_to_check_asic_voltage_by_steps: Set to voltage raw 2050, step by step.
    2020-05-24 15:46:40 power_api.c:85:check_voltage_multi: retry time: 0
    2020-05-24 15:46:41 power_api.c:40:_get_avg_voltage: chain = 1, voltage = 20.663705
    2020-05-24 15:46:42 power_api.c:40:_get_avg_voltage: chain = 2, voltage = 20.641678
    2020-05-24 15:46:42 power_api.c:53:_get_avg_voltage: average_voltage = 20.652691
    2020-05-24 15:46:42 power_api.c:71:check_voltage: target_vol = 20.50, actural_vol = 20.65, check voltage passed.
    chain 2, IO_DRIVE_STRENGTH_CONFIGURATION reg = 0x f1fffff
    2020-05-24 15:46:51 driver-btm-api.c:1119:check_asic_number_with_power_on: Chain[2]: find 0 asic, times 4
    2020-05-24 15:46:51 power_api.c:380:modify_check_asic_voltage: check_asic_voltage_raw = 2000
    2020-05-24 15:46:51 power_api.c:364:set_to_check_asic_voltage_by_steps: Set to voltage raw 2000, step by step.
    2020-05-24 15:46:54 power_api.c:85:check_voltage_multi: retry time: 0
    2020-05-24 15:46:55 power_api.c:40:_get_avg_voltage: chain = 1, voltage = 20.157359
    2020-05-24 15:46:56 power_api.c:40:_get_avg_voltage: chain = 2, voltage = 20.158831
    2020-05-24 15:46:56 power_api.c:53:_get_avg_voltage: average_voltage = 20.158095
    2020-05-24 15:46:56 power_api.c:71:check_voltage: target_vol = 20.00, actural_vol = 20.16, check voltage passed.
    chain 2, IO_DRIVE_STRENGTH_CONFIGURATION reg = 0x f1fffff
    2020-05-24 15:47:05 driver-btm-api.c:1119:check_asic_number_with_power_on: Chain[2]: find 0 asic, times 5
    2020-05-24 15:47:05 power_api.c:380:modify_check_asic_voltage: check_asic_voltage_raw = 2100
    2020-05-24 15:47:05 power_api.c:364:set_to_check_asic_voltage_by_steps: Set to voltage raw 2100, step by step.
    2020-05-24 15:47:10 power_api.c:85:check_voltage_multi: retry time: 0
    2020-05-24 15:47:11 power_api.c:40:_get_avg_voltage: chain = 1, voltage = 21.145938
    2020-05-24 15:47:12 power_api.c:40:_get_avg_voltage: chain = 2, voltage = 21.148666
    2020-05-24 15:47:12 power_api.c:53:_get_avg_voltage: average_voltage = 21.147302
    2020-05-24 15:47:12 power_api.c:71:check_voltage: target_vol = 21.00, actural_vol = 21.15, check voltage passed.
    2020-05-24 15:47:12 driver-btm-api.c:1155:check_asic_number: Chain 2 only find 0 asic, will power off hash board 2
    2020-05-24 15:47:13 driver-btm-api.c:1157:check_asic_number: Chain 2 voltage: an0 = 2.825806, an2 2.825806, an6 2.538710.
    2020-05-24 15:47:17 driver-hash-chip.c:266:set_uart_relay: set uart relay to 0x330003
    2020-05-24 15:47:17 driver-btm-api.c:397:set_order_clock: chain[1]: set order clock, stragegy 3
    2020-05-24 15:47:17 driver-hash-chip.c:502:set_clock_delay_control: core_data = 0x34
    2020-05-24 15:47:17 driver-btm-api.c:1854:check_clock_counter: freq 50 clock_counter_limit 6
    2020-05-24 15:47:18 voltage[1] = 1940
    2020-05-24 15:47:18 power_api.c:226:set_working_voltage_raw: working_voltage_raw = 1940
    2020-05-24 15:47:19 temperature.c:340:calibrate_temp_sensor_one_chain: chain 1 temp sensor NCT218
    2020-05-24 15:47:19 uart.c:72:set_baud: set fpga_baud to 12000000
    2020-05-24 15:47:19 driver-btm-api.c:264:check_bringup_temp: Bring up temperature is 30
    2020-05-24 15:47:19 thread.c:1081:create_check_miner_status_thread: create thread
    2020-05-24 15:47:19 thread.c:1071:create_show_miner_status_thread: create thread
    2020-05-24 15:47:19 thread.c:1051:create_temperature_monitor_thread: create thread
    2020-05-24 15:47:19 freq_tuning.c:183:freq_tuning_get_max_freq: Max freq of tuning is 650
    2020-05-24 15:47:19 driver-btm-api.c:1727:send_null_work: [DEBUG] Send null work.
    2020-05-24 15:47:19 thread.c:1041:create_asic_status_monitor_thread: create thread
    2020-05-24 15:47:19 frequency.c:1019:inc_freq_with_fixed_vco: chain = 255, freq = 540, is_higher_voltage = true
    2020-05-24 15:47:19 power_api.c:352:set_to_voltage_by_steps: Set to voltage raw 2090, step by step.
    2020-05-24 15:47:21 power_api.c:85:check_voltage_multi: retry time: 0
    2020-05-24 15:47:22 power_api.c:40:_get_avg_voltage: chain = 1, voltage = 21.049491
    2020-05-24 15:47:22 power_api.c:53:_get_avg_voltage: average_voltage = 21.049491
    2020-05-24 15:47:22 power_api.c:71:check_voltage: target_vol = 20.90, actural_vol = 21.05, check voltage passed.
    2020-05-24 15:47:42 frequency.c:1090:inc_asic_diff_freq_by_steps: chain = 1, start = 540, freq_step = 5
    2020-05-24 15:47:43 driver-btm-api.c:727:set_timeout: freq = 550, percent = 90, hcn = 44236, timeout = 80
    2020-05-24 15:47:43 power_api.c:310:set_to_working_voltage_by_steps: Set to voltage raw 1940, step by step.
    2020-05-24 15:47:50 power_api.c:85:check_voltage_multi: retry time: 0
    2020-05-24 15:47:51 power_api.c:40:_get_avg_voltage: chain = 1, voltage = 19.530456
    2020-05-24 15:47:51 power_api.c:53:_get_avg_voltage: average_voltage = 19.530456
    2020-05-24 15:47:51 power_api.c:71:check_voltage: target_vol = 19.40, actural_vol = 19.53, check voltage passed.
    2020-05-24 15:47:51 thread.c:1076:create_check_system_status_thread: create thread
    2020-05-24 15:47:52 driver-btm-api.c:2577:bitmain_soc_init: Init done!
    2020-05-24 15:47:52 driver-btm-api.c:216:set_miner_status: STATUS_INIT
    2020-05-24 15:47:56 driver-btm-api.c:216:set_miner_status: STATUS_OKAY
    2020-05-24 15:47:57 frequency.c:205:get_ideal_hash_rate_GH: ideal_hash_rate = 23082
    2020-05-24 15:47:57 frequency.c:223:get_sale_hash_rate_GH: sale_hash_rate = 22000
    2020-05-24 15:48:03 driver-btm-api.c:1458:dhash_chip_send_job: Version num 1.
    2020-05-24 15:48:31 driver-btm-api.c:1458:dhash_chip_send_job: Version num 4.
    2020-05-24 15:48:31 driver-btm-api.c:1606:dhash_chip_send_job: stime.tv_sec 1590335311, block_ntime 1590335311

     

    in this moment my s17 #2 its in 20+th an only chain 2 its working, can u please help me?

    i already read in other forums, to check voltage, and in this moment i already have in this moment 192 volts, maybe this is  the problem?  

     

    can you please help me support team?

     

    my email its : rockybalboarocky@gmail.com

     

    thanks to you very much.

    0
    Comment actions Permalink

    hi again, today my voltage its normal and......

     

    log s17 #1

     

    Booting Linux on physical CPU 0x0
    Linux version 4.6.0-xilinx-gff8137b-dirty (lzq@armdev2) (gcc version 4.8.3 20140320 (prerelease) (Sourcery CodeBench Lite 2014.05-23) ) #25 SMP PREEMPT Fri Nov 23 15:30:52 CST 2018
    CPU: ARMv7 Processor [413fc090] revision 0 (ARMv7), cr=18c5387d
    CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
    Machine model: Xilinx Zynq
    cma: Reserved 16 MiB at 0x0e000000
    Memory policy: Data cache writealloc
    On node 0 totalpages: 61440
    free_area_init_node: node 0, pgdat c0b39280, node_mem_map cde10000
    Normal zone: 480 pages used for memmap
    Normal zone: 0 pages reserved
    Normal zone: 61440 pages, LIFO batch:15
    percpu: Embedded 12 pages/cpu @cddf1000 s19776 r8192 d21184 u49152
    pcpu-alloc: s19776 r8192 d21184 u49152 alloc=12*4096
    pcpu-alloc: [0] 0 [0] 1
    Built 1 zonelists in Zone order, mobility grouping on. Total pages: 60960
    Kernel command line: mem=240M console=ttyPS0,115200 ramdisk_size=33554432 root=/dev/ram rw earlyprintk
    PID hash table entries: 1024 (order: 0, 4096 bytes)
    Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
    Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
    Memory: 203444K/245760K available (6345K kernel code, 231K rwdata, 1896K rodata, 1024K init, 223K bss, 25932K reserved, 16384K cma-reserved, 0K highmem)
    Virtual kernel memory layout:
    vector : 0xffff0000 - 0xffff1000 ( 4 kB)
    fixmap : 0xffc00000 - 0xfff00000 (3072 kB)
    vmalloc : 0xcf800000 - 0xff800000 ( 768 MB)
    lowmem : 0xc0000000 - 0xcf000000 ( 240 MB)
    pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
    modules : 0xbf000000 - 0xbfe00000 ( 14 MB)
    .text : 0xc0008000 - 0xc090c424 (9234 kB)
    .init : 0xc0a00000 - 0xc0b00000 (1024 kB)
    .data : 0xc0b00000 - 0xc0b39fe0 ( 232 kB)
    .bss : 0xc0b39fe0 - 0xc0b71c28 ( 224 kB)
    Preemptible hierarchical RCU implementation.
    Build-time adjustment of leaf fanout to 32.
    RCU restricting CPUs from NR_CPUS=4 to nr_cpu_ids=2.
    RCU: Adjusting geometry for rcu_fanout_leaf=32, nr_cpu_ids=2
    NR_IRQS:16 nr_irqs:16 16
    efuse mapped to cf800000
    ps7-slcr mapped to cf802000
    L2C: platform modifies aux control register: 0x72360000 -> 0x72760000
    L2C: DT/platform modifies aux control register: 0x72360000 -> 0x72760000
    L2C-310 erratum 769419 enabled
    L2C-310 enabling early BRESP for Cortex-A9
    L2C-310 full line of zeros enabled for Cortex-A9
    L2C-310 ID prefetch enabled, offset 1 lines
    L2C-310 dynamic clock gating enabled, standby mode enabled
    L2C-310 cache controller enabled, 8 ways, 512 kB
    L2C-310: CACHE_ID 0x410000c8, AUX_CTRL 0x76760001
    zynq_clock_init: clkc starts at cf802100
    Zynq clock init
    sched_clock: 64 bits at 333MHz, resolution 3ns, wraps every 4398046511103ns
    clocksource: arm_global_timer: mask: 0xffffffffffffffff max_cycles: 0x4ce07af025, max_idle_ns: 440795209040 ns
    Switching to timer-based delay loop, resolution 3ns
    clocksource: ttc_clocksource: mask: 0xffff max_cycles: 0xffff, max_idle_ns: 537538477 ns
    ps7-ttc #0 at cf80a000, irq=18
    Console: colour dummy device 80x30
    Calibrating delay loop (skipped), value calculated using timer frequency.. 666.66 BogoMIPS (lpj=3333333)
    pid_max: default: 32768 minimum: 301
    Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
    Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
    CPU: Testing write buffer coherency: ok
    CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
    Setting up static identity map for 0x100000 - 0x100058
    CPU1: failed to boot: -1
    Brought up 1 CPUs
    SMP: Total of 1 processors activated (666.66 BogoMIPS).
    CPU: All CPU(s) started in SVC mode.
    devtmpfs: initialized
    VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 4
    clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
    pinctrl core: initialized pinctrl subsystem
    NET: Registered protocol family 16
    DMA: preallocated 256 KiB pool for atomic coherent allocations
    cpuidle: using governor menu
    hw-breakpoint: found 5 (+1 reserved) breakpoint and 1 watchpoint registers.
    hw-breakpoint: maximum watchpoint size is 4 bytes.
    zynq-ocm f800c000.ps7-ocmc: ZYNQ OCM pool: 256 KiB @ 0xcf880000
    vgaarb: loaded
    SCSI subsystem initialized
    usbcore: registered new interface driver usbfs
    usbcore: registered new interface driver hub
    usbcore: registered new device driver usb
    media: Linux media interface: v0.10
    Linux video capture interface: v2.00
    pps_core: LinuxPPS API ver. 1 registered
    pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
    PTP clock support registered
    EDAC MC: Ver: 3.0.0
    Advanced Linux Sound Architecture Driver Initialized.
    clocksource: Switched to clocksource arm_global_timer
    NET: Registered protocol family 2
    TCP established hash table entries: 2048 (order: 1, 8192 bytes)
    TCP bind hash table entries: 2048 (order: 2, 16384 bytes)
    TCP: Hash tables configured (established 2048 bind 2048)
    UDP hash table entries: 256 (order: 1, 8192 bytes)
    UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
    NET: Registered protocol family 1
    RPC: Registered named UNIX socket transport module.
    RPC: Registered udp transport module.
    RPC: Registered tcp transport module.
    RPC: Registered tcp NFSv4.1 backchannel transport module.
    PCI: CLS 0 bytes, default 64
    Trying to unpack rootfs image as initramfs...
    rootfs image is not initramfs (no cpio magic); looks like an initrd
    Freeing initrd memory: 12892K (cce6a000 - cdb01000)
    hw perfevents: enabled with armv7_cortex_a9 PMU driver, 7 counters available
    futex hash table entries: 512 (order: 3, 32768 bytes)
    workingset: timestamp_bits=28 max_order=16 bucket_order=0
    jffs2: version 2.2. (NAND) (SUMMARY) © 2001-2006 Red Hat, Inc.
    io scheduler noop registered
    io scheduler deadline registered
    io scheduler cfq registered (default)
    dma-pl330 f8003000.ps7-dma: Loaded driver for PL330 DMAC-241330
    dma-pl330 f8003000.ps7-dma: DBUFF-128x8bytes Num_Chans-8 Num_Peri-4 Num_Events-16
    e0000000.serial: ttyPS0 at MMIO 0xe0000000 (irq = 158, base_baud = 6249999) is a xuartps
    console [ttyPS0] enabled
    xdevcfg f8007000.ps7-dev-cfg: ioremap 0xf8007000 to cf86e000
    [drm] Initialized drm 1.1.0 20060810
    brd: module loaded
    loop: module loaded
    CAN device driver interface
    gpiod_set_value: invalid GPIO
    libphy: MACB_mii_bus: probed
    macb e000b000.ethernet eth0: Cadence GEM rev 0x00020118 at 0xe000b000 irq 31 (00:0a:35:00:00:00)
    Generic PHY e000b000.etherne:00: attached PHY driver [Generic PHY] (mii_bus:phy_addr=e000b000.etherne:00, irq=-1)
    e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k
    e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
    ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
    ehci-pci: EHCI PCI platform driver
    usbcore: registered new interface driver usb-storage
    mousedev: PS/2 mouse device common for all mice
    i2c /dev entries driver
    Xilinx Zynq CpuIdle Driver started
    sdhci: Secure Digital Host Controller Interface driver
    sdhci: Copyright(c) Pierre Ossman
    sdhci-pltfm: SDHCI platform and OF driver helper
    mmc0: SDHCI controller on e0100000.ps7-sdio [e0100000.ps7-sdio] using ADMA
    ledtrig-cpu: registered to indicate activity on CPUs
    usbcore: registered new interface driver usbhid
    usbhid: USB HID core driver
    nand: device found, Manufacturer ID: 0x2c, Chip ID: 0xda
    nand: Micron MT29F2G08ABAEAWP
    nand: 256 MiB, SLC, erase size: 128 KiB, page size: 2048, OOB size: 64
    nand: WARNING: pl35x-nand: the ECC used on your system is too weak compared to the one required by the NAND chip
    Bad block table found at page 131008, version 0x01
    Bad block table found at page 130944, version 0x01
    6 ofpart partitions found on MTD device pl35x-nand
    Creating 6 MTD partitions on "pl35x-nand":
    0x000000000000-0x000002800000 : "BOOT.bin-env-dts-kernel"
    0x000002800000-0x000004800000 : "ramfs"
    0x000004800000-0x000005000000 : "configs"
    0x000005000000-0x000006000000 : "reserve"
    0x000006000000-0x000008000000 : "ramfs-bak"
    0x000008000000-0x000010000000 : "reserve1"
    NET: Registered protocol family 10
    sit: IPv6 over IPv4 tunneling driver
    NET: Registered protocol family 17
    can: controller area network core (rev 20120528 abi 9)
    NET: Registered protocol family 29
    can: raw protocol (rev 20120528)
    can: broadcast manager protocol (rev 20120528 t)
    can: netlink gateway (rev 20130117) max_hops=1
    zynq_pm_ioremap: no compatible node found for 'xlnx,zynq-ddrc-a05'
    zynq_pm_late_init: Unable to map DDRC IO memory.
    Registering SWP/SWPB emulation handler
    hctosys: unable to open rtc device (rtc0)
    ALSA device list:
    No soundcards found.
    RAMDISK: gzip image found at block 0
    EXT4-fs (ram0): couldn't mount as ext3 due to feature incompatibilities
    EXT4-fs (ram0): mounted filesystem without journal. Opts: (null)
    VFS: Mounted root (ext4 filesystem) on device 1:0.
    devtmpfs: mounted
    Freeing unused kernel memory: 1024K (c0a00000 - c0b00000)
    EXT4-fs (ram0): re-mounted. Opts: block_validity,delalloc,barrier,user_xattr
    random: dd urandom read with 0 bits of entropy available
    ubi0: attaching mtd2
    ubi0: scanning is finished
    ubi0: attached mtd2 (name "configs", size 8 MiB)
    ubi0: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes
    ubi0: min./max. I/O unit sizes: 2048/2048, sub-page size 2048
    ubi0: VID header offset: 2048 (aligned 2048), data offset: 4096
    ubi0: good PEBs: 64, bad PEBs: 0, corrupted PEBs: 0
    ubi0: user volume: 1, internal volumes: 1, max. volumes count: 128
    ubi0: max/mean erase counter: 47/17, WL threshold: 4096, image sequence number: 262741923
    ubi0: available PEBs: 0, total reserved PEBs: 64, PEBs reserved for bad PEB handling: 40
    ubi0: background thread "ubi_bgt0d" started, PID 708
    UBIFS (ubi0:0): background thread "ubifs_bgt0_0" started, PID 711
    UBIFS (ubi0:0): recovery needed
    UBIFS (ubi0:0): recovery completed
    UBIFS (ubi0:0): UBIFS: mounted UBI device 0, volume 0, name "configs"
    UBIFS (ubi0:0): LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
    UBIFS (ubi0:0): FS size: 1396736 bytes (1 MiB, 11 LEBs), journal size 888833 bytes (0 MiB, 5 LEBs)
    UBIFS (ubi0:0): reserved for root: 65970 bytes (64 KiB)
    UBIFS (ubi0:0): media format: w4/r0 (latest is w4/r0), UUID A9E8BDA4-70DE-45D9-83BE-2DD9F129C0C6, small LPT model
    ubi1: attaching mtd5
    ubi1: scanning is finished
    ubi1: attached mtd5 (name "reserve1", size 128 MiB)
    ubi1: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes
    ubi1: min./max. I/O unit sizes: 2048/2048, sub-page size 2048
    ubi1: VID header offset: 2048 (aligned 2048), data offset: 4096
    ubi1: good PEBs: 1020, bad PEBs: 4, corrupted PEBs: 0
    ubi1: user volume: 1, internal volumes: 1, max. volumes count: 128
    ubi1: max/mean erase counter: 163/45, WL threshold: 4096, image sequence number: 3563076859
    ubi1: available PEBs: 0, total reserved PEBs: 1020, PEBs reserved for bad PEB handling: 36
    ubi1: background thread "ubi_bgt1d" started, PID 720
    UBIFS (ubi1:0): background thread "ubifs_bgt1_0" started, PID 723
    UBIFS (ubi1:0): recovery needed
    UBIFS (ubi1:0): recovery completed
    UBIFS (ubi1:0): UBIFS: mounted UBI device 1, volume 0, name "reserve1"
    UBIFS (ubi1:0): LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
    UBIFS (ubi1:0): FS size: 123039744 bytes (117 MiB, 969 LEBs), journal size 6221824 bytes (5 MiB, 49 LEBs)
    UBIFS (ubi1:0): reserved for root: 4952683 bytes (4836 KiB)
    UBIFS (ubi1:0): media format: w4/r0 (latest is w4/r0), UUID A21581E4-693A-4BBF-A66A-FCE5ACD2EF7F, small LPT model
    IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
    IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
    macb e000b000.ethernet eth0: unable to generate target frequency: 25000000 Hz
    macb e000b000.ethernet eth0: link up (100/Full)
    IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
    In axi fpga driver!
    request_mem_region OK!
    AXI fpga dev virtual address is 0xcfb38000
    *base_vir_addr = 0xb023
    In fpga mem driver!
    request_mem_region OK!
    fpga mem virtual address is 0xd2000000
    random: nonblocking pool is initialized
    2020-05-25 16:57:41 driver-btm-api.c:741:init_freq_mode: This is scan-user version
    2020-05-25 16:57:41 driver-btm-api.c:2413:bitmain_soc_init: opt_multi_version = 1
    2020-05-25 16:57:41 driver-btm-api.c:2414:bitmain_soc_init: opt_bitmain_ab = 1
    2020-05-25 16:57:41 driver-btm-api.c:2415:bitmain_soc_init: opt_bitmain_work_mode = 0
    2020-05-25 16:57:41 driver-btm-api.c:2416:bitmain_soc_init: Miner compile time: Tue Apr 7 14:11:08 CST 2020 type: Antminer S17+
    2020-05-25 16:57:41 driver-btm-api.c:2417:bitmain_soc_init: commit version: 0fa7066 2020-04-06 22:14:32, build by: lol 2020-04-07 14:17:53
    2020-05-25 16:57:41 driver-btm-api.c:2045:show_sn: len:16, 814c84242b10481c
    2020-05-25 16:57:41 driver-btm-api.c:2423:bitmain_soc_init: show sn return 1
    2020-05-25 16:57:41 driver-btm-api.c:2065:handle_sn_for_factory_mode: show sn return 1
    2020-05-25 16:57:41 driver-btm-api.c:2103:handle_sn_for_factory_mode: read sn success, 814c84242b10481c
    2020-05-25 16:57:41 fan.c:279:front_fan_power_on: Note: front fan is power on!
    2020-05-25 16:57:41 fan.c:291:rear_fan_power_on: Note: rear fan is power on!
    2020-05-25 16:57:41 driver-btm-api.c:1276:miner_device_init: Detect 256MB control board of XILINX
    2020-05-25 16:57:41 driver-btm-api.c:1217:init_fan_parameter: fan_eft : 0 fan_pwm : 0
    2020-05-25 16:57:47 driver-btm-api.c:1201:init_miner_version: miner ID : 814c84242b10481c
    2020-05-25 16:57:47 driver-btm-api.c:1207:init_miner_version: FPGA Version = 0xB023
    2020-05-25 16:57:53 driver-btm-api.c:799:get_product_id: product_id[0] = 0
    2020-05-25 16:57:53 driver-btm-api.c:799:get_product_id: product_id[1] = 0
    2020-05-25 16:57:53 driver-btm-api.c:799:get_product_id: product_id[2] = 0
    2020-05-25 16:57:53 driver-btm-api.c:2196:update_conf_by_power_feedback: Power feedback is disabled
    2020-05-25 16:57:53 driver-btm-api.c:2164:get_calibration_voltage: calibration voltage flag is error data.
    2020-05-25 16:57:53 driver-btm-api.c:2230:update_conf_by_power_feedback: Note: no calibration voltage, default diff = 0
    2020-05-25 16:57:53 frequency.c:1366:adjust_higer_max_vol_table: adjust_higer_max_vol_table, adjust_vol = 0
    2020-05-25 16:57:53 thread.c:1066:create_read_nonce_reg_thread: create thread
    2020-05-25 16:57:59 driver-btm-api.c:1201:init_miner_version: miner ID : 814c84242b10481c
    2020-05-25 16:57:59 driver-btm-api.c:1207:init_miner_version: FPGA Version = 0xB023
    2020-05-25 16:58:04 driver-btm-api.c:799:get_product_id: product_id[0] = 0
    2020-05-25 16:58:04 driver-btm-api.c:799:get_product_id: product_id[1] = 0
    2020-05-25 16:58:04 driver-btm-api.c:799:get_product_id: product_id[2] = 0
    2020-05-25 16:58:04 driver-btm-api.c:754:_set_project_type: project:0
    2020-05-25 16:58:04 driver-btm-api.c:775:_set_project_type: Project type: Antminer S17+
    2020-05-25 16:58:04 driver-btm-api.c:786:dump_pcb_bom_version: Chain [0] PCB Version: 0x0100
    2020-05-25 16:58:04 driver-btm-api.c:787:dump_pcb_bom_version: Chain [0] BOM Version: 0x0100
    2020-05-25 16:58:04 driver-btm-api.c:786:dump_pcb_bom_version: Chain [1] PCB Version: 0x0100
    2020-05-25 16:58:04 driver-btm-api.c:787:dump_pcb_bom_version: Chain [1] BOM Version: 0x0100
    2020-05-25 16:58:04 driver-btm-api.c:786:dump_pcb_bom_version: Chain [2] PCB Version: 0x0100
    2020-05-25 16:58:04 driver-btm-api.c:787:dump_pcb_bom_version: Chain [2] BOM Version: 0x0100
    2020-05-25 16:58:06 driver-btm-api.c:2334:bitmain_board_init: Fan check passed.
    2020-05-25 16:58:07 board.c:36:jump_and_app_check_restore_pic: chain[0] PIC jump to app
    2020-05-25 16:58:09 board.c:40:jump_and_app_check_restore_pic: Check chain[0] PIC fw version=0x88
    2020-05-25 16:58:10 board.c:36:jump_and_app_check_restore_pic: chain[1] PIC jump to app
    2020-05-25 16:58:12 board.c:40:jump_and_app_check_restore_pic: Check chain[1] PIC fw version=0x88
    2020-05-25 16:58:13 board.c:36:jump_and_app_check_restore_pic: chain[2] PIC jump to app
    2020-05-25 16:58:15 board.c:40:jump_and_app_check_restore_pic: Check chain[2] PIC fw version=0x88
    2020-05-25 16:58:15 thread.c:1061:create_pic_heart_beat_thread: create thread
    2020-05-25 16:58:15 power_api.c:213:power_init: Power init:
    2020-05-25 16:58:15 power_api.c:214:power_init: current_voltage_raw = 0
    2020-05-25 16:58:15 power_api.c:215:power_init: highest_voltage_raw = 2100
    2020-05-25 16:58:15 power_api.c:216:power_init: working_voltage_raw = 1950
    2020-05-25 16:58:15 power_api.c:217:power_init: higher_voltage_raw = 2040
    2020-05-25 16:58:15 power_api.c:218:power_init: check_asic_voltage_raw = 2100
    2020-05-25 16:58:15 driver-btm-api.c:2344:bitmain_board_init: Enter 30s sleep to make sure power release finish.
    2020-05-25 16:58:15 power_api.c:186:power_off: init gpio907
    2020-05-25 16:58:47 power_api.c:324:set_to_highest_voltage_by_steps: Set to voltage raw 2100, step by step.
    2020-05-25 16:59:13 power_api.c:85:check_voltage_multi: retry time: 0
    2020-05-25 16:59:14 power_api.c:40:_get_avg_voltage: chain = 0, voltage = 21.230967
    2020-05-25 16:59:15 power_api.c:40:_get_avg_voltage: chain = 1, voltage = 21.130155
    2020-05-25 16:59:16 power_api.c:40:_get_avg_voltage: chain = 2, voltage = 21.230967
    2020-05-25 16:59:16 power_api.c:53:_get_avg_voltage: average_voltage = 21.197363
    2020-05-25 16:59:16 power_api.c:71:check_voltage: target_vol = 21.00, actural_vol = 21.20, check voltage passed.
    2020-05-25 16:59:16 uart.c:72:set_baud: set fpga_baud to 115200
    2020-05-25 16:59:27 driver-btm-api.c:1096:check_asic_number_with_power_on: Chain[0]: find 0 asic, times 0
    2020-05-25 16:59:38 driver-btm-api.c:1096:check_asic_number_with_power_on: Chain[0]: find 0 asic, times 1
    2020-05-25 16:59:49 driver-btm-api.c:1096:check_asic_number_with_power_on: Chain[0]: find 0 asic, times 2
    2020-05-25 16:59:49 power_api.c:380:modify_check_asic_voltage: check_asic_voltage_raw = 2100
    chain 0, IO_DRIVE_STRENGTH_CONFIGURATION reg = 0x f1fffff
    2020-05-25 16:59:58 driver-btm-api.c:1119:check_asic_number_with_power_on: Chain[0]: find 0 asic, times 3
    2020-05-25 16:59:58 power_api.c:380:modify_check_asic_voltage: check_asic_voltage_raw = 2050
    2020-05-25 16:59:58 power_api.c:364:set_to_check_asic_voltage_by_steps: Set to voltage raw 2050, step by step.
    2020-05-25 17:00:01 power_api.c:85:check_voltage_multi: retry time: 0
    2020-05-25 17:00:03 power_api.c:40:_get_avg_voltage: chain = 0, voltage = 20.689434
    2020-05-25 17:00:04 power_api.c:40:_get_avg_voltage: chain = 1, voltage = 20.640465
    2020-05-25 17:00:05 power_api.c:40:_get_avg_voltage: chain = 2, voltage = 20.742894
    2020-05-25 17:00:05 power_api.c:53:_get_avg_voltage: average_voltage = 20.690931
    2020-05-25 17:00:05 power_api.c:71:check_voltage: target_vol = 20.50, actural_vol = 20.69, check voltage passed.
    chain 0, IO_DRIVE_STRENGTH_CONFIGURATION reg = 0x f1fffff
    2020-05-25 17:00:14 driver-btm-api.c:1119:check_asic_number_with_power_on: Chain[0]: find 0 asic, times 4
    2020-05-25 17:00:14 power_api.c:380:modify_check_asic_voltage: check_asic_voltage_raw = 2000
    2020-05-25 17:00:14 power_api.c:364:set_to_check_asic_voltage_by_steps: Set to voltage raw 2000, step by step.
    2020-05-25 17:00:17 power_api.c:85:check_voltage_multi: retry time: 0
    2020-05-25 17:00:19 power_api.c:40:_get_avg_voltage: chain = 0, voltage = 20.199743
    2020-05-25 17:00:20 power_api.c:40:_get_avg_voltage: chain = 1, voltage = 20.150774
    2020-05-25 17:00:21 power_api.c:40:_get_avg_voltage: chain = 2, voltage = 20.250322
    2020-05-25 17:00:21 power_api.c:53:_get_avg_voltage: average_voltage = 20.200280
    2020-05-25 17:00:21 power_api.c:71:check_voltage: target_vol = 20.00, actural_vol = 20.20, check voltage passed.
    chain 0, IO_DRIVE_STRENGTH_CONFIGURATION reg = 0x f1fffff
    2020-05-25 17:00:29 driver-btm-api.c:1119:check_asic_number_with_power_on: Chain[0]: find 0 asic, times 5
    2020-05-25 17:00:29 power_api.c:380:modify_check_asic_voltage: check_asic_voltage_raw = 2100
    2020-05-25 17:00:29 power_api.c:364:set_to_check_asic_voltage_by_steps: Set to voltage raw 2100, step by step.
    2020-05-25 17:00:35 power_api.c:85:check_voltage_multi: retry time: 0
    2020-05-25 17:00:36 power_api.c:40:_get_avg_voltage: chain = 0, voltage = 21.179125
    2020-05-25 17:00:37 power_api.c:40:_get_avg_voltage: chain = 1, voltage = 21.130155
    2020-05-25 17:00:38 power_api.c:40:_get_avg_voltage: chain = 2, voltage = 21.258398
    2020-05-25 17:00:38 power_api.c:53:_get_avg_voltage: average_voltage = 21.189226
    2020-05-25 17:00:38 power_api.c:71:check_voltage: target_vol = 21.00, actural_vol = 21.19, check voltage passed.
    2020-05-25 17:00:38 driver-btm-api.c:1155:check_asic_number: Chain 0 only find 0 asic, will power off hash board 0
    2020-05-25 17:00:39 driver-btm-api.c:1157:check_asic_number: Chain 0 voltage: an0 = 2.803226, an2 2.790323, an6 2.503226.
    2020-05-25 17:00:51 driver-btm-api.c:1096:check_asic_number_with_power_on: Chain[1]: find 0 asic, times 0
    2020-05-25 17:01:02 driver-btm-api.c:1096:check_asic_number_with_power_on: Chain[1]: find 0 asic, times 1
    2020-05-25 17:01:12 driver-btm-api.c:1096:check_asic_number_with_power_on: Chain[1]: find 0 asic, times 2
    2020-05-25 17:01:12 power_api.c:380:modify_check_asic_voltage: check_asic_voltage_raw = 2100
    chain 1, IO_DRIVE_STRENGTH_CONFIGURATION reg = 0x f1fffff
    2020-05-25 17:01:21 driver-btm-api.c:1119:check_asic_number_with_power_on: Chain[1]: find 0 asic, times 3
    2020-05-25 17:01:21 power_api.c:380:modify_check_asic_voltage: check_asic_voltage_raw = 2050
    2020-05-25 17:01:21 power_api.c:364:set_to_check_asic_voltage_by_steps: Set to voltage raw 2050, step by step.
    2020-05-25 17:01:24 power_api.c:85:check_voltage_multi: retry time: 0
    2020-05-25 17:01:25 power_api.c:40:_get_avg_voltage: chain = 1, voltage = 20.613899
    2020-05-25 17:01:26 power_api.c:40:_get_avg_voltage: chain = 2, voltage = 20.716129
    2020-05-25 17:01:26 power_api.c:53:_get_avg_voltage: average_voltage = 20.665014
    2020-05-25 17:01:26 power_api.c:71:check_voltage: target_vol = 20.50, actural_vol = 20.67, check voltage passed.
    chain 1, IO_DRIVE_STRENGTH_CONFIGURATION reg = 0x f1fffff
    2020-05-25 17:01:35 driver-btm-api.c:1119:check_asic_number_with_power_on: Chain[1]: find 0 asic, times 4
    2020-05-25 17:01:35 power_api.c:380:modify_check_asic_voltage: check_asic_voltage_raw = 2000
    2020-05-25 17:01:35 power_api.c:364:set_to_check_asic_voltage_by_steps: Set to voltage raw 2000, step by step.
    2020-05-25 17:01:38 power_api.c:85:check_voltage_multi: retry time: 0
    2020-05-25 17:01:40 power_api.c:40:_get_avg_voltage: chain = 1, voltage = 20.124839
    2020-05-25 17:01:41 power_api.c:40:_get_avg_voltage: chain = 2, voltage = 20.251938
    2020-05-25 17:01:41 power_api.c:53:_get_avg_voltage: average_voltage = 20.188388
    2020-05-25 17:01:41 power_api.c:71:check_voltage: target_vol = 20.00, actural_vol = 20.19, check voltage passed.
    chain 1, IO_DRIVE_STRENGTH_CONFIGURATION reg = 0x f1fffff
    2020-05-25 17:01:49 driver-btm-api.c:1119:check_asic_number_with_power_on: Chain[1]: find 0 asic, times 5
    2020-05-25 17:01:49 power_api.c:380:modify_check_asic_voltage: check_asic_voltage_raw = 2100
    2020-05-25 17:01:49 power_api.c:364:set_to_check_asic_voltage_by_steps: Set to voltage raw 2100, step by step.
    2020-05-25 17:01:54 power_api.c:85:check_voltage_multi: retry time: 0
    2020-05-25 17:01:56 power_api.c:40:_get_avg_voltage: chain = 1, voltage = 21.102960
    2020-05-25 17:01:57 power_api.c:40:_get_avg_voltage: chain = 2, voltage = 21.233850
    2020-05-25 17:01:57 power_api.c:53:_get_avg_voltage: average_voltage = 21.168405
    2020-05-25 17:01:57 power_api.c:71:check_voltage: target_vol = 21.00, actural_vol = 21.17, check voltage passed.
    2020-05-25 17:01:57 driver-btm-api.c:1155:check_asic_number: Chain 1 only find 0 asic, will power off hash board 1
    2020-05-25 17:01:58 driver-btm-api.c:1157:check_asic_number: Chain 1 voltage: an0 = 2.783871, an2 2.783871, an6 2.506452.
    2020-05-25 17:02:09 driver-btm-api.c:1096:check_asic_number_with_power_on: Chain[2]: find 0 asic, times 0
    2020-05-25 17:02:20 driver-btm-api.c:1096:check_asic_number_with_power_on: Chain[2]: find 0 asic, times 1
    2020-05-25 17:02:31 driver-btm-api.c:1096:check_asic_number_with_power_on: Chain[2]: find 0 asic, times 2
    2020-05-25 17:02:31 power_api.c:380:modify_check_asic_voltage: check_asic_voltage_raw = 2100
    chain 2, IO_DRIVE_STRENGTH_CONFIGURATION reg = 0x f1fffff
    2020-05-25 17:02:40 driver-btm-api.c:1119:check_asic_number_with_power_on: Chain[2]: find 0 asic, times 3
    2020-05-25 17:02:40 power_api.c:380:modify_check_asic_voltage: check_asic_voltage_raw = 2050
    2020-05-25 17:02:40 power_api.c:364:set_to_check_asic_voltage_by_steps: Set to voltage raw 2050, step by step.
    2020-05-25 17:02:43 power_api.c:85:check_voltage_multi: retry time: 0
    2020-05-25 17:02:44 power_api.c:40:_get_avg_voltage: chain = 2, voltage = 20.689434
    2020-05-25 17:02:44 power_api.c:53:_get_avg_voltage: average_voltage = 20.689434
    2020-05-25 17:02:44 power_api.c:71:check_voltage: target_vol = 20.50, actural_vol = 20.69, check voltage passed.
    chain 2, IO_DRIVE_STRENGTH_CONFIGURATION reg = 0x f1fffff
    2020-05-25 17:02:53 driver-btm-api.c:1119:check_asic_number_with_power_on: Chain[2]: find 0 asic, times 4
    2020-05-25 17:02:53 power_api.c:380:modify_check_asic_voltage: check_asic_voltage_raw = 2000
    2020-05-25 17:02:53 power_api.c:364:set_to_check_asic_voltage_by_steps: Set to voltage raw 2000, step by step.
    2020-05-25 17:02:56 power_api.c:85:check_voltage_multi: retry time: 0
    2020-05-25 17:02:58 power_api.c:40:_get_avg_voltage: chain = 2, voltage = 20.199743
    2020-05-25 17:02:58 power_api.c:53:_get_avg_voltage: average_voltage = 20.199743
    2020-05-25 17:02:58 power_api.c:71:check_voltage: target_vol = 20.00, actural_vol = 20.20, check voltage passed.
    chain 2, IO_DRIVE_STRENGTH_CONFIGURATION reg = 0x f1fffff
    2020-05-25 17:03:07 driver-btm-api.c:1119:check_asic_number_with_power_on: Chain[2]: find 0 asic, times 5
    2020-05-25 17:03:07 power_api.c:380:modify_check_asic_voltage: check_asic_voltage_raw = 2100
    2020-05-25 17:03:07 power_api.c:364:set_to_check_asic_voltage_by_steps: Set to voltage raw 2100, step by step.
    2020-05-25 17:03:12 power_api.c:85:check_voltage_multi: retry time: 0
    2020-05-25 17:03:13 power_api.c:40:_get_avg_voltage: chain = 2, voltage = 21.203609
    2020-05-25 17:03:13 power_api.c:53:_get_avg_voltage: average_voltage = 21.203609
    2020-05-25 17:03:13 power_api.c:71:check_voltage: target_vol = 21.00, actural_vol = 21.20, check voltage passed.
    2020-05-25 17:03:13 driver-btm-api.c:1155:check_asic_number: Chain 2 only find 0 asic, will power off hash board 2
    2020-05-25 17:03:14 driver-btm-api.c:1157:check_asic_number: Chain 2 voltage: an0 = 2.796774, an2 2.790323, an6 2.500000.
    2020-05-25 17:03:15 driver-btm-api.c:216:set_miner_status: ERROR_SOC_INIT
    2020-05-25 17:03:15 driver-btm-api.c:156:stop_mining: stop mining: soc init failed!
    2020-05-25 17:03:15 thread.c:1101:cancel_read_nonce_reg_thread: cancel thread
    2020-05-25 17:03:15 driver-btm-api.c:141:killall_hashboard: ****power off hashboard****

     

     

    log s17 #2

    Booting Linux on physical CPU 0x0
    Linux version 4.6.0-xilinx-gff8137b-dirty (lzq@armdev2) (gcc version 4.8.3 20140320 (prerelease) (Sourcery CodeBench Lite 2014.05-23) ) #25 SMP PREEMPT Fri Nov 23 15:30:52 CST 2018
    CPU: ARMv7 Processor [413fc090] revision 0 (ARMv7), cr=18c5387d
    CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
    Machine model: Xilinx Zynq
    cma: Reserved 16 MiB at 0x0e000000
    Memory policy: Data cache writealloc
    On node 0 totalpages: 61440
    free_area_init_node: node 0, pgdat c0b39280, node_mem_map cde10000
    Normal zone: 480 pages used for memmap
    Normal zone: 0 pages reserved
    Normal zone: 61440 pages, LIFO batch:15
    percpu: Embedded 12 pages/cpu @cddf1000 s19776 r8192 d21184 u49152
    pcpu-alloc: s19776 r8192 d21184 u49152 alloc=12*4096
    pcpu-alloc: [0] 0 [0] 1
    Built 1 zonelists in Zone order, mobility grouping on. Total pages: 60960
    Kernel command line: mem=240M console=ttyPS0,115200 ramdisk_size=33554432 root=/dev/ram rw earlyprintk
    PID hash table entries: 1024 (order: 0, 4096 bytes)
    Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
    Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
    Memory: 203444K/245760K available (6345K kernel code, 231K rwdata, 1896K rodata, 1024K init, 223K bss, 25932K reserved, 16384K cma-reserved, 0K highmem)
    Virtual kernel memory layout:
    vector : 0xffff0000 - 0xffff1000 ( 4 kB)
    fixmap : 0xffc00000 - 0xfff00000 (3072 kB)
    vmalloc : 0xcf800000 - 0xff800000 ( 768 MB)
    lowmem : 0xc0000000 - 0xcf000000 ( 240 MB)
    pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
    modules : 0xbf000000 - 0xbfe00000 ( 14 MB)
    .text : 0xc0008000 - 0xc090c424 (9234 kB)
    .init : 0xc0a00000 - 0xc0b00000 (1024 kB)
    .data : 0xc0b00000 - 0xc0b39fe0 ( 232 kB)
    .bss : 0xc0b39fe0 - 0xc0b71c28 ( 224 kB)
    Preemptible hierarchical RCU implementation.
    Build-time adjustment of leaf fanout to 32.
    RCU restricting CPUs from NR_CPUS=4 to nr_cpu_ids=2.
    RCU: Adjusting geometry for rcu_fanout_leaf=32, nr_cpu_ids=2
    NR_IRQS:16 nr_irqs:16 16
    efuse mapped to cf800000
    ps7-slcr mapped to cf802000
    L2C: platform modifies aux control register: 0x72360000 -> 0x72760000
    L2C: DT/platform modifies aux control register: 0x72360000 -> 0x72760000
    L2C-310 erratum 769419 enabled
    L2C-310 enabling early BRESP for Cortex-A9
    L2C-310 full line of zeros enabled for Cortex-A9
    L2C-310 ID prefetch enabled, offset 1 lines
    L2C-310 dynamic clock gating enabled, standby mode enabled
    L2C-310 cache controller enabled, 8 ways, 512 kB
    L2C-310: CACHE_ID 0x410000c8, AUX_CTRL 0x76760001
    zynq_clock_init: clkc starts at cf802100
    Zynq clock init
    sched_clock: 64 bits at 333MHz, resolution 3ns, wraps every 4398046511103ns
    clocksource: arm_global_timer: mask: 0xffffffffffffffff max_cycles: 0x4ce07af025, max_idle_ns: 440795209040 ns
    Switching to timer-based delay loop, resolution 3ns
    clocksource: ttc_clocksource: mask: 0xffff max_cycles: 0xffff, max_idle_ns: 537538477 ns
    ps7-ttc #0 at cf80a000, irq=18
    Console: colour dummy device 80x30
    Calibrating delay loop (skipped), value calculated using timer frequency.. 666.66 BogoMIPS (lpj=3333333)
    pid_max: default: 32768 minimum: 301
    Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
    Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
    CPU: Testing write buffer coherency: ok
    CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
    Setting up static identity map for 0x100000 - 0x100058
    CPU1: failed to boot: -1
    Brought up 1 CPUs
    SMP: Total of 1 processors activated (666.66 BogoMIPS).
    CPU: All CPU(s) started in SVC mode.
    devtmpfs: initialized
    VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 4
    clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
    pinctrl core: initialized pinctrl subsystem
    NET: Registered protocol family 16
    DMA: preallocated 256 KiB pool for atomic coherent allocations
    cpuidle: using governor menu
    hw-breakpoint: found 5 (+1 reserved) breakpoint and 1 watchpoint registers.
    hw-breakpoint: maximum watchpoint size is 4 bytes.
    zynq-ocm f800c000.ps7-ocmc: ZYNQ OCM pool: 256 KiB @ 0xcf880000
    vgaarb: loaded
    SCSI subsystem initialized
    usbcore: registered new interface driver usbfs
    usbcore: registered new interface driver hub
    usbcore: registered new device driver usb
    media: Linux media interface: v0.10
    Linux video capture interface: v2.00
    pps_core: LinuxPPS API ver. 1 registered
    pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
    PTP clock support registered
    EDAC MC: Ver: 3.0.0
    Advanced Linux Sound Architecture Driver Initialized.
    clocksource: Switched to clocksource arm_global_timer
    NET: Registered protocol family 2
    TCP established hash table entries: 2048 (order: 1, 8192 bytes)
    TCP bind hash table entries: 2048 (order: 2, 16384 bytes)
    TCP: Hash tables configured (established 2048 bind 2048)
    UDP hash table entries: 256 (order: 1, 8192 bytes)
    UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
    NET: Registered protocol family 1
    RPC: Registered named UNIX socket transport module.
    RPC: Registered udp transport module.
    RPC: Registered tcp transport module.
    RPC: Registered tcp NFSv4.1 backchannel transport module.
    PCI: CLS 0 bytes, default 64
    Trying to unpack rootfs image as initramfs...
    rootfs image is not initramfs (no cpio magic); looks like an initrd
    Freeing initrd memory: 12892K (cce6a000 - cdb01000)
    hw perfevents: enabled with armv7_cortex_a9 PMU driver, 7 counters available
    futex hash table entries: 512 (order: 3, 32768 bytes)
    workingset: timestamp_bits=28 max_order=16 bucket_order=0
    jffs2: version 2.2. (NAND) (SUMMARY) © 2001-2006 Red Hat, Inc.
    io scheduler noop registered
    io scheduler deadline registered
    io scheduler cfq registered (default)
    dma-pl330 f8003000.ps7-dma: Loaded driver for PL330 DMAC-241330
    dma-pl330 f8003000.ps7-dma: DBUFF-128x8bytes Num_Chans-8 Num_Peri-4 Num_Events-16
    e0000000.serial: ttyPS0 at MMIO 0xe0000000 (irq = 158, base_baud = 6249999) is a xuartps
    console [ttyPS0] enabled
    xdevcfg f8007000.ps7-dev-cfg: ioremap 0xf8007000 to cf86e000
    [drm] Initialized drm 1.1.0 20060810
    brd: module loaded
    loop: module loaded
    CAN device driver interface
    gpiod_set_value: invalid GPIO
    libphy: MACB_mii_bus: probed
    macb e000b000.ethernet eth0: Cadence GEM rev 0x00020118 at 0xe000b000 irq 31 (00:0a:35:00:00:00)
    Generic PHY e000b000.etherne:00: attached PHY driver [Generic PHY] (mii_bus:phy_addr=e000b000.etherne:00, irq=-1)
    e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k
    e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
    ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
    ehci-pci: EHCI PCI platform driver
    usbcore: registered new interface driver usb-storage
    mousedev: PS/2 mouse device common for all mice
    i2c /dev entries driver
    Xilinx Zynq CpuIdle Driver started
    sdhci: Secure Digital Host Controller Interface driver
    sdhci: Copyright(c) Pierre Ossman
    sdhci-pltfm: SDHCI platform and OF driver helper
    mmc0: SDHCI controller on e0100000.ps7-sdio [e0100000.ps7-sdio] using ADMA
    ledtrig-cpu: registered to indicate activity on CPUs
    usbcore: registered new interface driver usbhid
    usbhid: USB HID core driver
    nand: device found, Manufacturer ID: 0x2c, Chip ID: 0xda
    nand: Micron MT29F2G08ABAEAWP
    nand: 256 MiB, SLC, erase size: 128 KiB, page size: 2048, OOB size: 64
    nand: WARNING: pl35x-nand: the ECC used on your system is too weak compared to the one required by the NAND chip
    Bad block table found at page 131008, version 0x01
    Bad block table found at page 130944, version 0x01
    6 ofpart partitions found on MTD device pl35x-nand
    Creating 6 MTD partitions on "pl35x-nand":
    0x000000000000-0x000002800000 : "BOOT.bin-env-dts-kernel"
    0x000002800000-0x000004800000 : "ramfs"
    0x000004800000-0x000005000000 : "configs"
    0x000005000000-0x000006000000 : "reserve"
    0x000006000000-0x000008000000 : "ramfs-bak"
    0x000008000000-0x000010000000 : "reserve1"
    NET: Registered protocol family 10
    sit: IPv6 over IPv4 tunneling driver
    NET: Registered protocol family 17
    can: controller area network core (rev 20120528 abi 9)
    NET: Registered protocol family 29
    can: raw protocol (rev 20120528)
    can: broadcast manager protocol (rev 20120528 t)
    can: netlink gateway (rev 20130117) max_hops=1
    zynq_pm_ioremap: no compatible node found for 'xlnx,zynq-ddrc-a05'
    zynq_pm_late_init: Unable to map DDRC IO memory.
    Registering SWP/SWPB emulation handler
    hctosys: unable to open rtc device (rtc0)
    ALSA device list:
    No soundcards found.
    RAMDISK: gzip image found at block 0
    EXT4-fs (ram0): couldn't mount as ext3 due to feature incompatibilities
    EXT4-fs (ram0): mounted filesystem without journal. Opts: (null)
    VFS: Mounted root (ext4 filesystem) on device 1:0.
    devtmpfs: mounted
    Freeing unused kernel memory: 1024K (c0a00000 - c0b00000)
    EXT4-fs (ram0): re-mounted. Opts: block_validity,delalloc,barrier,user_xattr
    random: dd urandom read with 0 bits of entropy available
    ubi0: attaching mtd2
    ubi0: scanning is finished
    ubi0: attached mtd2 (name "configs", size 8 MiB)
    ubi0: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes
    ubi0: min./max. I/O unit sizes: 2048/2048, sub-page size 2048
    ubi0: VID header offset: 2048 (aligned 2048), data offset: 4096
    ubi0: good PEBs: 64, bad PEBs: 0, corrupted PEBs: 0
    ubi0: user volume: 1, internal volumes: 1, max. volumes count: 128
    ubi0: max/mean erase counter: 47/16, WL threshold: 4096, image sequence number: 262741923
    ubi0: available PEBs: 0, total reserved PEBs: 64, PEBs reserved for bad PEB handling: 40
    ubi0: background thread "ubi_bgt0d" started, PID 708
    UBIFS (ubi0:0): background thread "ubifs_bgt0_0" started, PID 711
    UBIFS (ubi0:0): recovery needed
    UBIFS (ubi0:0): recovery completed
    UBIFS (ubi0:0): UBIFS: mounted UBI device 0, volume 0, name "configs"
    UBIFS (ubi0:0): LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
    UBIFS (ubi0:0): FS size: 1396736 bytes (1 MiB, 11 LEBs), journal size 888833 bytes (0 MiB, 5 LEBs)
    UBIFS (ubi0:0): reserved for root: 65970 bytes (64 KiB)
    UBIFS (ubi0:0): media format: w4/r0 (latest is w4/r0), UUID A9E8BDA4-70DE-45D9-83BE-2DD9F129C0C6, small LPT model
    ubi1: attaching mtd5
    ubi1: scanning is finished
    ubi1: attached mtd5 (name "reserve1", size 128 MiB)
    ubi1: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes
    ubi1: min./max. I/O unit sizes: 2048/2048, sub-page size 2048
    ubi1: VID header offset: 2048 (aligned 2048), data offset: 4096
    ubi1: good PEBs: 1020, bad PEBs: 4, corrupted PEBs: 0
    ubi1: user volume: 1, internal volumes: 1, max. volumes count: 128
    ubi1: max/mean erase counter: 102/32, WL threshold: 4096, image sequence number: 3563076859
    ubi1: available PEBs: 0, total reserved PEBs: 1020, PEBs reserved for bad PEB handling: 36
    ubi1: background thread "ubi_bgt1d" started, PID 720
    UBIFS (ubi1:0): background thread "ubifs_bgt1_0" started, PID 723
    UBIFS (ubi1:0): recovery needed
    UBIFS (ubi1:0): recovery completed
    UBIFS (ubi1:0): UBIFS: mounted UBI device 1, volume 0, name "reserve1"
    UBIFS (ubi1:0): LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
    UBIFS (ubi1:0): FS size: 123039744 bytes (117 MiB, 969 LEBs), journal size 6221824 bytes (5 MiB, 49 LEBs)
    UBIFS (ubi1:0): reserved for root: 4952683 bytes (4836 KiB)
    UBIFS (ubi1:0): media format: w4/r0 (latest is w4/r0), UUID A21581E4-693A-4BBF-A66A-FCE5ACD2EF7F, small LPT model
    IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
    IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
    macb e000b000.ethernet eth0: unable to generate target frequency: 25000000 Hz
    macb e000b000.ethernet eth0: link up (100/Full)
    IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
    In axi fpga driver!
    request_mem_region OK!
    AXI fpga dev virtual address is 0xcfb38000
    *base_vir_addr = 0xb023
    In fpga mem driver!
    request_mem_region OK!
    fpga mem virtual address is 0xd2000000
    random: nonblocking pool is initialized
    2020-05-25 16:58:31 driver-btm-api.c:741:init_freq_mode: This is scan-user version
    2020-05-25 16:58:31 driver-btm-api.c:2413:bitmain_soc_init: opt_multi_version = 1
    2020-05-25 16:58:31 driver-btm-api.c:2414:bitmain_soc_init: opt_bitmain_ab = 1
    2020-05-25 16:58:31 driver-btm-api.c:2415:bitmain_soc_init: opt_bitmain_work_mode = 0
    2020-05-25 16:58:31 driver-btm-api.c:2416:bitmain_soc_init: Miner compile time: Tue Apr 7 14:11:08 CST 2020 type: Antminer S17+
    2020-05-25 16:58:31 driver-btm-api.c:2417:bitmain_soc_init: commit version: 0fa7066 2020-04-06 22:14:32, build by: lol 2020-04-07 14:17:53
    2020-05-25 16:58:31 driver-btm-api.c:2045:show_sn: len:16, 8022f44a7910481c
    2020-05-25 16:58:31 driver-btm-api.c:2423:bitmain_soc_init: show sn return 1
    2020-05-25 16:58:31 driver-btm-api.c:2065:handle_sn_for_factory_mode: show sn return 1
    2020-05-25 16:58:31 driver-btm-api.c:2103:handle_sn_for_factory_mode: read sn success, 8022f44a7910481c
    2020-05-25 16:58:31 fan.c:279:front_fan_power_on: Note: front fan is power on!
    2020-05-25 16:58:31 fan.c:291:rear_fan_power_on: Note: rear fan is power on!
    2020-05-25 16:58:32 driver-btm-api.c:1276:miner_device_init: Detect 256MB control board of XILINX
    2020-05-25 16:58:32 driver-btm-api.c:1217:init_fan_parameter: fan_eft : 0 fan_pwm : 0
    2020-05-25 16:58:38 driver-btm-api.c:1201:init_miner_version: miner ID : 8022f44a7910481c
    2020-05-25 16:58:38 driver-btm-api.c:1207:init_miner_version: FPGA Version = 0xB023
    2020-05-25 16:58:43 driver-btm-api.c:799:get_product_id: product_id[0] = 0
    2020-05-25 16:58:43 driver-btm-api.c:799:get_product_id: product_id[1] = 0
    2020-05-25 16:58:43 driver-btm-api.c:799:get_product_id: product_id[2] = 0
    2020-05-25 16:58:43 driver-btm-api.c:2196:update_conf_by_power_feedback: Power feedback is disabled
    2020-05-25 16:58:43 driver-btm-api.c:2164:get_calibration_voltage: calibration voltage flag is error data.
    2020-05-25 16:58:43 driver-btm-api.c:2230:update_conf_by_power_feedback: Note: no calibration voltage, default diff = 0
    2020-05-25 16:58:43 frequency.c:1366:adjust_higer_max_vol_table: adjust_higer_max_vol_table, adjust_vol = 0
    2020-05-25 16:58:43 thread.c:1066:create_read_nonce_reg_thread: create thread
    2020-05-25 16:58:49 driver-btm-api.c:1201:init_miner_version: miner ID : 8022f44a7910481c
    2020-05-25 16:58:49 driver-btm-api.c:1207:init_miner_version: FPGA Version = 0xB023
    2020-05-25 16:58:54 driver-btm-api.c:799:get_product_id: product_id[0] = 0
    2020-05-25 16:58:54 driver-btm-api.c:799:get_product_id: product_id[1] = 0
    2020-05-25 16:58:54 driver-btm-api.c:799:get_product_id: product_id[2] = 0
    2020-05-25 16:58:54 driver-btm-api.c:754:_set_project_type: project:0
    2020-05-25 16:58:54 driver-btm-api.c:775:_set_project_type: Project type: Antminer S17+
    2020-05-25 16:58:54 driver-btm-api.c:786:dump_pcb_bom_version: Chain [0] PCB Version: 0x0100
    2020-05-25 16:58:54 driver-btm-api.c:787:dump_pcb_bom_version: Chain [0] BOM Version: 0x0100
    2020-05-25 16:58:54 driver-btm-api.c:786:dump_pcb_bom_version: Chain [1] PCB Version: 0x0100
    2020-05-25 16:58:54 driver-btm-api.c:787:dump_pcb_bom_version: Chain [1] BOM Version: 0x0100
    2020-05-25 16:58:54 driver-btm-api.c:786:dump_pcb_bom_version: Chain [2] PCB Version: 0x0100
    2020-05-25 16:58:54 driver-btm-api.c:787:dump_pcb_bom_version: Chain [2] BOM Version: 0x0100
    2020-05-25 16:58:54 driver-btm-api.c:2334:bitmain_board_init: Fan check passed.
    2020-05-25 16:58:55 board.c:36:jump_and_app_check_restore_pic: chain[0] PIC jump to app
    2020-05-25 16:58:57 board.c:40:jump_and_app_check_restore_pic: Check chain[0] PIC fw version=0x88
    2020-05-25 16:58:58 board.c:36:jump_and_app_check_restore_pic: chain[1] PIC jump to app
    2020-05-25 16:59:01 board.c:40:jump_and_app_check_restore_pic: Check chain[1] PIC fw version=0x88
    2020-05-25 16:59:02 board.c:36:jump_and_app_check_restore_pic: chain[2] PIC jump to app
    2020-05-25 16:59:04 board.c:40:jump_and_app_check_restore_pic: Check chain[2] PIC fw version=0x88
    2020-05-25 16:59:04 thread.c:1061:create_pic_heart_beat_thread: create thread
    2020-05-25 16:59:04 power_api.c:213:power_init: Power init:
    2020-05-25 16:59:04 power_api.c:214:power_init: current_voltage_raw = 0
    2020-05-25 16:59:04 power_api.c:215:power_init: highest_voltage_raw = 2100
    2020-05-25 16:59:04 power_api.c:216:power_init: working_voltage_raw = 1950
    2020-05-25 16:59:04 power_api.c:217:power_init: higher_voltage_raw = 2040
    2020-05-25 16:59:04 power_api.c:218:power_init: check_asic_voltage_raw = 2100
    2020-05-25 16:59:04 driver-btm-api.c:2344:bitmain_board_init: Enter 30s sleep to make sure power release finish.
    2020-05-25 16:59:04 power_api.c:186:power_off: init gpio907
    2020-05-25 16:59:36 power_api.c:324:set_to_highest_voltage_by_steps: Set to voltage raw 2100, step by step.
    2020-05-25 17:00:01 power_api.c:85:check_voltage_multi: retry time: 0
    2020-05-25 17:00:03 power_api.c:40:_get_avg_voltage: chain = 0, voltage = 21.078880
    2020-05-25 17:00:04 power_api.c:40:_get_avg_voltage: chain = 1, voltage = 21.196951
    2020-05-25 17:00:05 power_api.c:40:_get_avg_voltage: chain = 2, voltage = 21.199745
    2020-05-25 17:00:05 power_api.c:53:_get_avg_voltage: average_voltage = 21.158525
    2020-05-25 17:00:05 power_api.c:71:check_voltage: target_vol = 21.00, actural_vol = 21.16, check voltage passed.
    2020-05-25 17:00:05 uart.c:72:set_baud: set fpga_baud to 115200
    2020-05-25 17:00:16 driver-btm-api.c:1096:check_asic_number_with_power_on: Chain[0]: find 0 asic, times 0
    2020-05-25 17:00:27 driver-btm-api.c:1096:check_asic_number_with_power_on: Chain[0]: find 0 asic, times 1
    2020-05-25 17:00:37 driver-btm-api.c:1096:check_asic_number_with_power_on: Chain[0]: find 0 asic, times 2
    2020-05-25 17:00:37 power_api.c:380:modify_check_asic_voltage: check_asic_voltage_raw = 2100
    chain 0, IO_DRIVE_STRENGTH_CONFIGURATION reg = 0x f1fffff
    2020-05-25 17:00:46 driver-btm-api.c:1119:check_asic_number_with_power_on: Chain[0]: find 0 asic, times 3
    2020-05-25 17:00:46 power_api.c:380:modify_check_asic_voltage: check_asic_voltage_raw = 2050
    2020-05-25 17:00:46 power_api.c:364:set_to_check_asic_voltage_by_steps: Set to voltage raw 2050, step by step.
    2020-05-25 17:00:49 power_api.c:85:check_voltage_multi: retry time: 0
    2020-05-25 17:00:51 power_api.c:40:_get_avg_voltage: chain = 0, voltage = 20.545108
    2020-05-25 17:00:53 power_api.c:40:_get_avg_voltage: chain = 1, voltage = 20.689962
    2020-05-25 17:00:54 power_api.c:40:_get_avg_voltage: chain = 2, voltage = 20.694268
    2020-05-25 17:00:54 power_api.c:53:_get_avg_voltage: average_voltage = 20.643113
    2020-05-25 17:00:54 power_api.c:71:check_voltage: target_vol = 20.50, actural_vol = 20.64, check voltage passed.
    chain 0, IO_DRIVE_STRENGTH_CONFIGURATION reg = 0x f1fffff
    2020-05-25 17:01:02 driver-btm-api.c:1119:check_asic_number_with_power_on: Chain[0]: find 0 asic, times 4
    2020-05-25 17:01:02 power_api.c:380:modify_check_asic_voltage: check_asic_voltage_raw = 2000
    2020-05-25 17:01:02 power_api.c:364:set_to_check_asic_voltage_by_steps: Set to voltage raw 2000, step by step.
    2020-05-25 17:01:06 power_api.c:85:check_voltage_multi: retry time: 0
    2020-05-25 17:01:07 power_api.c:40:_get_avg_voltage: chain = 0, voltage = 20.038120
    2020-05-25 17:01:08 power_api.c:40:_get_avg_voltage: chain = 1, voltage = 20.182974
    2020-05-25 17:01:09 power_api.c:40:_get_avg_voltage: chain = 2, voltage = 20.184478
    2020-05-25 17:01:09 power_api.c:53:_get_avg_voltage: average_voltage = 20.135190
    2020-05-25 17:01:09 power_api.c:71:check_voltage: target_vol = 20.00, actural_vol = 20.14, check voltage passed.
    chain 0, IO_DRIVE_STRENGTH_CONFIGURATION reg = 0x f1fffff
    2020-05-25 17:01:18 driver-btm-api.c:1119:check_asic_number_with_power_on: Chain[0]: find 0 asic, times 5
    2020-05-25 17:01:18 power_api.c:380:modify_check_asic_voltage: check_asic_voltage_raw = 2100
    2020-05-25 17:01:18 power_api.c:364:set_to_check_asic_voltage_by_steps: Set to voltage raw 2100, step by step.
    2020-05-25 17:01:23 power_api.c:85:check_voltage_multi: retry time: 0
    2020-05-25 17:01:24 power_api.c:40:_get_avg_voltage: chain = 0, voltage = 21.052097
    2020-05-25 17:01:25 power_api.c:40:_get_avg_voltage: chain = 1, voltage = 21.199745
    2020-05-25 17:01:26 power_api.c:40:_get_avg_voltage: chain = 2, voltage = 21.175572
    2020-05-25 17:01:26 power_api.c:53:_get_avg_voltage: average_voltage = 21.142471
    2020-05-25 17:01:26 power_api.c:71:check_voltage: target_vol = 21.00, actural_vol = 21.14, check voltage passed.
    2020-05-25 17:01:26 driver-btm-api.c:1155:check_asic_number: Chain 0 only find 0 asic, will power off hash board 0
    2020-05-25 17:01:27 driver-btm-api.c:1157:check_asic_number: Chain 0 voltage: an0 = 2.819355, an2 2.809677, an6 2.538710.
    2020-05-25 17:01:39 driver-btm-api.c:1096:check_asic_number_with_power_on: Chain[1]: find 65 asic, times 0
    2020-05-25 17:01:51 driver-btm-api.c:1096:check_asic_number_with_power_on: Chain[2]: find 38 asic, times 0
    2020-05-25 17:02:02 driver-btm-api.c:1096:check_asic_number_with_power_on: Chain[2]: find 38 asic, times 1
    2020-05-25 17:02:13 driver-btm-api.c:1096:check_asic_number_with_power_on: Chain[2]: find 38 asic, times 2
    2020-05-25 17:02:13 power_api.c:380:modify_check_asic_voltage: check_asic_voltage_raw = 2100
    chain 2, IO_DRIVE_STRENGTH_CONFIGURATION reg = 0x f1fffff
    2020-05-25 17:02:22 driver-btm-api.c:1119:check_asic_number_with_power_on: Chain[2]: find 38 asic, times 3
    2020-05-25 17:02:22 power_api.c:380:modify_check_asic_voltage: check_asic_voltage_raw = 2050
    2020-05-25 17:02:22 power_api.c:364:set_to_check_asic_voltage_by_steps: Set to voltage raw 2050, step by step.
    2020-05-25 17:02:26 power_api.c:85:check_voltage_multi: retry time: 0
    2020-05-25 17:02:27 power_api.c:40:_get_avg_voltage: chain = 1, voltage = 20.663705
    2020-05-25 17:02:28 power_api.c:40:_get_avg_voltage: chain = 2, voltage = 20.641678
    2020-05-25 17:02:28 power_api.c:53:_get_avg_voltage: average_voltage = 20.652691
    2020-05-25 17:02:28 power_api.c:71:check_voltage: target_vol = 20.50, actural_vol = 20.65, check voltage passed.
    chain 2, IO_DRIVE_STRENGTH_CONFIGURATION reg = 0x f1fffff
    2020-05-25 17:02:38 driver-btm-api.c:1119:check_asic_number_with_power_on: Chain[2]: find 38 asic, times 4
    2020-05-25 17:02:38 power_api.c:380:modify_check_asic_voltage: check_asic_voltage_raw = 2000
    2020-05-25 17:02:38 power_api.c:364:set_to_check_asic_voltage_by_steps: Set to voltage raw 2000, step by step.
    2020-05-25 17:02:41 power_api.c:85:check_voltage_multi: retry time: 0
    2020-05-25 17:02:42 power_api.c:40:_get_avg_voltage: chain = 1, voltage = 20.207116
    2020-05-25 17:02:43 power_api.c:40:_get_avg_voltage: chain = 2, voltage = 20.158831
    2020-05-25 17:02:43 power_api.c:53:_get_avg_voltage: average_voltage = 20.182974
    2020-05-25 17:02:43 power_api.c:71:check_voltage: target_vol = 20.00, actural_vol = 20.18, check voltage passed.
    chain 2, IO_DRIVE_STRENGTH_CONFIGURATION reg = 0x f1fffff
    2020-05-25 17:02:52 driver-btm-api.c:1119:check_asic_number_with_power_on: Chain[2]: find 38 asic, times 5
    2020-05-25 17:02:52 power_api.c:380:modify_check_asic_voltage: check_asic_voltage_raw = 2100
    2020-05-25 17:02:52 power_api.c:364:set_to_check_asic_voltage_by_steps: Set to voltage raw 2100, step by step.
    2020-05-25 17:02:57 power_api.c:85:check_voltage_multi: retry time: 0
    2020-05-25 17:02:59 power_api.c:40:_get_avg_voltage: chain = 1, voltage = 21.145938
    2020-05-25 17:03:00 power_api.c:40:_get_avg_voltage: chain = 2, voltage = 21.148666
    2020-05-25 17:03:00 power_api.c:53:_get_avg_voltage: average_voltage = 21.147302
    2020-05-25 17:03:00 power_api.c:71:check_voltage: target_vol = 21.00, actural_vol = 21.15, check voltage passed.
    2020-05-25 17:03:00 driver-btm-api.c:1155:check_asic_number: Chain 2 only find 38 asic, will power off hash board 2
    2020-05-25 17:03:01 driver-btm-api.c:1157:check_asic_number: Chain 2 voltage: an0 = 2.825806, an2 2.825806, an6 2.538710.
    2020-05-25 17:03:05 driver-hash-chip.c:266:set_uart_relay: set uart relay to 0x330003
    2020-05-25 17:03:05 driver-btm-api.c:397:set_order_clock: chain[1]: set order clock, stragegy 3
    2020-05-25 17:03:05 driver-hash-chip.c:502:set_clock_delay_control: core_data = 0x34
    2020-05-25 17:03:05 driver-btm-api.c:1854:check_clock_counter: freq 50 clock_counter_limit 6
    2020-05-25 17:03:06 voltage[1] = 1940
    2020-05-25 17:03:06 power_api.c:226:set_working_voltage_raw: working_voltage_raw = 1940
    2020-05-25 17:03:07 temperature.c:340:calibrate_temp_sensor_one_chain: chain 1 temp sensor NCT218
    2020-05-25 17:03:07 uart.c:72:set_baud: set fpga_baud to 12000000
    2020-05-25 17:03:07 driver-btm-api.c:264:check_bringup_temp: Bring up temperature is 30
    2020-05-25 17:03:07 thread.c:1081:create_check_miner_status_thread: create thread
    2020-05-25 17:03:07 thread.c:1071:create_show_miner_status_thread: create thread
    2020-05-25 17:03:07 thread.c:1051:create_temperature_monitor_thread: create thread
    2020-05-25 17:03:07 freq_tuning.c:183:freq_tuning_get_max_freq: Max freq of tuning is 650
    2020-05-25 17:03:07 driver-btm-api.c:1727:send_null_work: [DEBUG] Send null work.
    2020-05-25 17:03:07 thread.c:1041:create_asic_status_monitor_thread: create thread
    2020-05-25 17:03:07 frequency.c:1019:inc_freq_with_fixed_vco: chain = 255, freq = 540, is_higher_voltage = true
    2020-05-25 17:03:07 power_api.c:352:set_to_voltage_by_steps: Set to voltage raw 2090, step by step.
    2020-05-25 17:03:09 power_api.c:85:check_voltage_multi: retry time: 0
    2020-05-25 17:03:10 power_api.c:40:_get_avg_voltage: chain = 1, voltage = 21.049491
    2020-05-25 17:03:10 power_api.c:53:_get_avg_voltage: average_voltage = 21.049491
    2020-05-25 17:03:10 power_api.c:71:check_voltage: target_vol = 20.90, actural_vol = 21.05, check voltage passed.
    2020-05-25 17:03:30 frequency.c:1090:inc_asic_diff_freq_by_steps: chain = 1, start = 540, freq_step = 5
    2020-05-25 17:03:31 driver-btm-api.c:727:set_timeout: freq = 550, percent = 90, hcn = 44236, timeout = 80
    2020-05-25 17:03:31 power_api.c:310:set_to_working_voltage_by_steps: Set to voltage raw 1940, step by step.
    2020-05-25 17:03:38 power_api.c:85:check_voltage_multi: retry time: 0
    2020-05-25 17:03:39 power_api.c:40:_get_avg_voltage: chain = 1, voltage = 19.530456
    2020-05-25 17:03:39 power_api.c:53:_get_avg_voltage: average_voltage = 19.530456
    2020-05-25 17:03:39 power_api.c:71:check_voltage: target_vol = 19.40, actural_vol = 19.53, check voltage passed.
    2020-05-25 17:03:39 thread.c:1076:create_check_system_status_thread: create thread
    2020-05-25 17:03:40 driver-btm-api.c:2577:bitmain_soc_init: Init done!
    2020-05-25 17:03:40 driver-btm-api.c:216:set_miner_status: STATUS_INIT
    2020-05-25 17:03:44 driver-btm-api.c:216:set_miner_status: STATUS_OKAY
    2020-05-25 17:03:45 frequency.c:205:get_ideal_hash_rate_GH: ideal_hash_rate = 23082
    2020-05-25 17:03:45 frequency.c:223:get_sale_hash_rate_GH: sale_hash_rate = 22000
    2020-05-25 17:03:49 driver-btm-api.c:1458:dhash_chip_send_job: Version num 4.
    2020-05-25 17:03:49 driver-btm-api.c:1606:dhash_chip_send_job: stime.tv_sec 1590426229, block_ntime 1590426228

     

    can u guys please help me? support team?

    0
    Comment actions Permalink

    I have with my miner t17e same this problem. Pls help me too.

    0
    Comment actions Permalink

    Did anyone get a response to this problem?  Same problem here.

    0
    Comment actions Permalink

    problem here 

    Booting Linux on physical CPU 0x0
    Linux version 4.6.0-xilinx-gff8137b-dirty (lzq@armdev2) (gcc version 4.8.3 20140320 (prerelease) (Sourcery CodeBench Lite 2014.05-23) ) #25 SMP PREEMPT Fri Nov 23 15:30:52 CST 2018
    CPU: ARMv7 Processor [413fc090] revision 0 (ARMv7), cr=18c5387d
    CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
    Machine model: Xilinx Zynq
    cma: Reserved 16 MiB at 0x0e000000
    Memory policy: Data cache writealloc
    On node 0 totalpages: 61440
    free_area_init_node: node 0, pgdat c0b39280, node_mem_map cde10000
    Normal zone: 480 pages used for memmap
    Normal zone: 0 pages reserved
    Normal zone: 61440 pages, LIFO batch:15
    percpu: Embedded 12 pages/cpu @cddf1000 s19776 r8192 d21184 u49152
    pcpu-alloc: s19776 r8192 d21184 u49152 alloc=12*4096
    pcpu-alloc: [0] 0 [0] 1
    Built 1 zonelists in Zone order, mobility grouping on. Total pages: 60960
    Kernel command line: mem=240M console=ttyPS0,115200 ramdisk_size=33554432 root=/dev/ram rw earlyprintk
    PID hash table entries: 1024 (order: 0, 4096 bytes)
    Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
    Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
    Memory: 203264K/245760K available (6345K kernel code, 231K rwdata, 1896K rodata, 1024K init, 223K bss, 26112K reserved, 16384K cma-reserved, 0K highmem)
    Virtual kernel memory layout:
    vector : 0xffff0000 - 0xffff1000 ( 4 kB)
    fixmap : 0xffc00000 - 0xfff00000 (3072 kB)
    vmalloc : 0xcf800000 - 0xff800000 ( 768 MB)
    lowmem : 0xc0000000 - 0xcf000000 ( 240 MB)
    pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
    modules : 0xbf000000 - 0xbfe00000 ( 14 MB)
    .text : 0xc0008000 - 0xc090c424 (9234 kB)
    .init : 0xc0a00000 - 0xc0b00000 (1024 kB)
    .data : 0xc0b00000 - 0xc0b39fe0 ( 232 kB)
    .bss : 0xc0b39fe0 - 0xc0b71c28 ( 224 kB)
    Preemptible hierarchical RCU implementation.
    Build-time adjustment of leaf fanout to 32.
    RCU restricting CPUs from NR_CPUS=4 to nr_cpu_ids=2.
    RCU: Adjusting geometry for rcu_fanout_leaf=32, nr_cpu_ids=2
    NR_IRQS:16 nr_irqs:16 16
    efuse mapped to cf800000
    ps7-slcr mapped to cf802000
    L2C: platform modifies aux control register: 0x72360000 -> 0x72760000
    L2C: DT/platform modifies aux control register: 0x72360000 -> 0x72760000
    L2C-310 erratum 769419 enabled
    L2C-310 enabling early BRESP for Cortex-A9
    L2C-310 full line of zeros enabled for Cortex-A9
    L2C-310 ID prefetch enabled, offset 1 lines
    L2C-310 dynamic clock gating enabled, standby mode enabled
    L2C-310 cache controller enabled, 8 ways, 512 kB
    L2C-310: CACHE_ID 0x410000c8, AUX_CTRL 0x76760001
    zynq_clock_init: clkc starts at cf802100
    Zynq clock init
    sched_clock: 64 bits at 333MHz, resolution 3ns, wraps every 4398046511103ns
    clocksource: arm_global_timer: mask: 0xffffffffffffffff max_cycles: 0x4ce07af025, max_idle_ns: 440795209040 ns
    Switching to timer-based delay loop, resolution 3ns
    clocksource: ttc_clocksource: mask: 0xffff max_cycles: 0xffff, max_idle_ns: 537538477 ns
    ps7-ttc #0 at cf80a000, irq=18
    Console: colour dummy device 80x30
    Calibrating delay loop (skipped), value calculated using timer frequency.. 666.66 BogoMIPS (lpj=3333333)
    pid_max: default: 32768 minimum: 301
    Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
    Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
    CPU: Testing write buffer coherency: ok
    CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
    Setting up static identity map for 0x100000 - 0x100058
    CPU1: failed to boot: -1
    Brought up 1 CPUs
    SMP: Total of 1 processors activated (666.66 BogoMIPS).
    CPU: All CPU(s) started in SVC mode.
    devtmpfs: initialized
    VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 4
    clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
    pinctrl core: initialized pinctrl subsystem
    NET: Registered protocol family 16
    DMA: preallocated 256 KiB pool for atomic coherent allocations
    cpuidle: using governor menu
    hw-breakpoint: found 5 (+1 reserved) breakpoint and 1 watchpoint registers.
    hw-breakpoint: maximum watchpoint size is 4 bytes.
    zynq-ocm f800c000.ps7-ocmc: ZYNQ OCM pool: 256 KiB @ 0xcf880000
    vgaarb: loaded
    SCSI subsystem initialized
    usbcore: registered new interface driver usbfs
    usbcore: registered new interface driver hub
    usbcore: registered new device driver usb
    media: Linux media interface: v0.10
    Linux video capture interface: v2.00
    pps_core: LinuxPPS API ver. 1 registered
    pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
    PTP clock support registered
    EDAC MC: Ver: 3.0.0
    Advanced Linux Sound Architecture Driver Initialized.
    clocksource: Switched to clocksource arm_global_timer
    NET: Registered protocol family 2
    TCP established hash table entries: 2048 (order: 1, 8192 bytes)
    TCP bind hash table entries: 2048 (order: 2, 16384 bytes)
    TCP: Hash tables configured (established 2048 bind 2048)
    UDP hash table entries: 256 (order: 1, 8192 bytes)
    UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
    NET: Registered protocol family 1
    RPC: Registered named UNIX socket transport module.
    RPC: Registered udp transport module.
    RPC: Registered tcp transport module.
    RPC: Registered tcp NFSv4.1 backchannel transport module.
    PCI: CLS 0 bytes, default 64
    Trying to unpack rootfs image as initramfs...
    rootfs image is not initramfs (no cpio magic); looks like an initrd
    Freeing initrd memory: 13072K (cce3c000 - cdb00000)
    hw perfevents: enabled with armv7_cortex_a9 PMU driver, 7 counters available
    futex hash table entries: 512 (order: 3, 32768 bytes)
    workingset: timestamp_bits=28 max_order=16 bucket_order=0
    jffs2: version 2.2. (NAND) (SUMMARY) © 2001-2006 Red Hat, Inc.
    io scheduler noop registered
    io scheduler deadline registered
    io scheduler cfq registered (default)
    dma-pl330 f8003000.ps7-dma: Loaded driver for PL330 DMAC-241330
    dma-pl330 f8003000.ps7-dma: DBUFF-128x8bytes Num_Chans-8 Num_Peri-4 Num_Events-16
    e0000000.serial: ttyPS0 at MMIO 0xe0000000 (irq = 158, base_baud = 6249999) is a xuartps
    console [ttyPS0] enabled
    xdevcfg f8007000.ps7-dev-cfg: ioremap 0xf8007000 to cf86e000
    [drm] Initialized drm 1.1.0 20060810
    brd: module loaded
    loop: module loaded
    CAN device driver interface
    gpiod_set_value: invalid GPIO
    libphy: MACB_mii_bus: probed
    macb e000b000.ethernet eth0: Cadence GEM rev 0x00020118 at 0xe000b000 irq 31 (00:0a:35:00:00:00)
    Generic PHY e000b000.etherne:00: attached PHY driver [Generic PHY] (mii_bus:phy_addr=e000b000.etherne:00, irq=-1)
    e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k
    e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
    ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
    ehci-pci: EHCI PCI platform driver
    usbcore: registered new interface driver usb-storage
    mousedev: PS/2 mouse device common for all mice
    i2c /dev entries driver
    Xilinx Zynq CpuIdle Driver started
    sdhci: Secure Digital Host Controller Interface driver
    sdhci: Copyright(c) Pierre Ossman
    sdhci-pltfm: SDHCI platform and OF driver helper
    mmc0: SDHCI controller on e0100000.ps7-sdio [e0100000.ps7-sdio] using ADMA
    ledtrig-cpu: registered to indicate activity on CPUs
    usbcore: registered new interface driver usbhid
    usbhid: USB HID core driver
    nand: device found, Manufacturer ID: 0x2c, Chip ID: 0xda
    nand: Micron MT29F2G08ABAEAWP
    nand: 256 MiB, SLC, erase size: 128 KiB, page size: 2048, OOB size: 64
    nand: WARNING: pl35x-nand: the ECC used on your system is too weak compared to the one required by the NAND chip
    Bad block table found at page 131008, version 0x01
    Bad block table found at page 130944, version 0x01
    6 ofpart partitions found on MTD device pl35x-nand
    Creating 6 MTD partitions on "pl35x-nand":
    0x000000000000-0x000002800000 : "BOOT.bin-env-dts-kernel"
    0x000002800000-0x000004800000 : "ramfs"
    0x000004800000-0x000005000000 : "configs"
    0x000005000000-0x000006000000 : "reserve"
    0x000006000000-0x000008000000 : "ramfs-bak"
    0x000008000000-0x000010000000 : "reserve1"
    NET: Registered protocol family 10
    sit: IPv6 over IPv4 tunneling driver
    NET: Registered protocol family 17
    can: controller area network core (rev 20120528 abi 9)
    NET: Registered protocol family 29
    can: raw protocol (rev 20120528)
    can: broadcast manager protocol (rev 20120528 t)
    can: netlink gateway (rev 20130117) max_hops=1
    zynq_pm_ioremap: no compatible node found for 'xlnx,zynq-ddrc-a05'
    zynq_pm_late_init: Unable to map DDRC IO memory.
    Registering SWP/SWPB emulation handler
    hctosys: unable to open rtc device (rtc0)
    ALSA device list:
    No soundcards found.
    RAMDISK: gzip image found at block 0
    EXT4-fs (ram0): couldn't mount as ext3 due to feature incompatibilities
    EXT4-fs (ram0): mounted filesystem without journal. Opts: (null)
    VFS: Mounted root (ext4 filesystem) on device 1:0.
    devtmpfs: mounted
    Freeing unused kernel memory: 1024K (c0a00000 - c0b00000)
    EXT4-fs (ram0): re-mounted. Opts: block_validity,delalloc,barrier,user_xattr
    random: dd urandom read with 0 bits of entropy available
    ubi0: attaching mtd2
    ubi0: scanning is finished
    ubi0: attached mtd2 (name "configs", size 8 MiB)
    ubi0: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes
    ubi0: min./max. I/O unit sizes: 2048/2048, sub-page size 2048
    ubi0: VID header offset: 2048 (aligned 2048), data offset: 4096
    ubi0: good PEBs: 64, bad PEBs: 0, corrupted PEBs: 0
    ubi0: user volume: 1, internal volumes: 1, max. volumes count: 128
    ubi0: max/mean erase counter: 11/5, WL threshold: 4096, image sequence number: 262741923
    ubi0: available PEBs: 0, total reserved PEBs: 64, PEBs reserved for bad PEB handling: 40
    ubi0: background thread "ubi_bgt0d" started, PID 708
    UBIFS (ubi0:0): background thread "ubifs_bgt0_0" started, PID 711
    UBIFS (ubi0:0): recovery needed
    UBIFS (ubi0:0): recovery completed
    UBIFS (ubi0:0): UBIFS: mounted UBI device 0, volume 0, name "configs"
    UBIFS (ubi0:0): LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
    UBIFS (ubi0:0): FS size: 1396736 bytes (1 MiB, 11 LEBs), journal size 888833 bytes (0 MiB, 5 LEBs)
    UBIFS (ubi0:0): reserved for root: 65970 bytes (64 KiB)
    UBIFS (ubi0:0): media format: w4/r0 (latest is w4/r0), UUID A9E8BDA4-70DE-45D9-83BE-2DD9F129C0C6, small LPT model
    ubi1: attaching mtd5
    ubi1: scanning is finished
    ubi1: attached mtd5 (name "reserve1", size 128 MiB)
    ubi1: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes
    ubi1: min./max. I/O unit sizes: 2048/2048, sub-page size 2048
    ubi1: VID header offset: 2048 (aligned 2048), data offset: 4096
    ubi1: good PEBs: 1020, bad PEBs: 4, corrupted PEBs: 0
    ubi1: user volume: 1, internal volumes: 1, max. volumes count: 128
    ubi1: max/mean erase counter: 12611/10492, WL threshold: 4096, image sequence number: 3563076859
    ubi1: available PEBs: 0, total reserved PEBs: 1020, PEBs reserved for bad PEB handling: 36
    ubi1: background thread "ubi_bgt1d" started, PID 720
    UBIFS (ubi1:0): background thread "ubifs_bgt1_0" started, PID 723
    UBIFS (ubi1:0): recovery needed
    UBIFS (ubi1:0): recovery completed
    UBIFS (ubi1:0): UBIFS: mounted UBI device 1, volume 0, name "reserve1"
    UBIFS (ubi1:0): LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
    UBIFS (ubi1:0): FS size: 123039744 bytes (117 MiB, 969 LEBs), journal size 6221824 bytes (5 MiB, 49 LEBs)
    UBIFS (ubi1:0): reserved for root: 4952683 bytes (4836 KiB)
    UBIFS (ubi1:0): media format: w4/r0 (latest is w4/r0), UUID A21581E4-693A-4BBF-A66A-FCE5ACD2EF7F, small LPT model
    IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
    IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
    macb e000b000.ethernet eth0: unable to generate target frequency: 25000000 Hz
    macb e000b000.ethernet eth0: link up (100/Full)
    IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
    In axi fpga driver!
    request_mem_region OK!
    AXI fpga dev virtual address is 0xcfb38000
    *base_vir_addr = 0xb023
    In fpga mem driver!
    request_mem_region OK!
    fpga mem virtual address is 0xd2000000
    2021-08-23 18:25:44:driver-btm-api.c:601:init_freq_mode: This is scan-user version
    2021-08-23 18:25:44:driver-btm-api.c:2362:bitmain_soc_init: Miner compile time: Wed Apr 22 11:21:11 CST 2020 type: Antminer T17e
    2021-08-23 18:25:44:driver-btm-api.c:2363:bitmain_soc_init: commit version: 68a75c6 2020-04-13 20:14:09, build by: lol 2020-04-22 11:27:45
    2021-08-23 18:25:44:driver-btm-api.c:2364:bitmain_soc_init: opt_multi_version = 1
    2021-08-23 18:25:44:driver-btm-api.c:2365:bitmain_soc_init: opt_bitmain_ab = 1
    2021-08-23 18:25:44:driver-btm-api.c:2366:bitmain_soc_init: mid_auto_gen = 0
    2021-08-23 18:25:44:driver-btm-api.c:2367:bitmain_soc_init: work_mode = 0
    2021-08-23 18:25:44:driver-btm-api.c:2368:bitmain_soc_init: power_feedback_en = true
    2021-08-23 18:25:44:driver-btm-api.c:1950:show_sn: no SN got, please write SN to /config/sn
    2021-08-23 18:25:44:fan.c:287:front_fan_power_on: Note: front fan is power on!
    2021-08-23 18:25:44:fan.c:299:rear_fan_power_on: Note: rear fan is power on!
    2021-08-23 18:25:44:driver-btm-api.c:1274:miner_device_init: Detect 256MB control board of XILINX
    2021-08-23 18:25:44:driver-btm-api.c:1215:init_fan_parameter: fan_eft : 0 fan_pwm : 0
    2021-08-23 18:25:50:driver-btm-api.c:1199:init_miner_version: miner ID : 8014e4c42b104814
    2021-08-23 18:25:50:driver-btm-api.c:1205:init_miner_version: FPGA Version = 0xB023
    2021-08-23 18:25:56:auto_adapt.c:100:_get_board_info: chain[0] board bin: 1, chip bin: 3, chip ft: A4V4, chip version: AB
    2021-08-23 18:25:56:auto_adapt.c:100:_get_board_info: chain[1] board bin: 1, chip bin: 3, chip ft: A4V4, chip version: AB
    2021-08-23 18:25:56:auto_adapt.c:100:_get_board_info: chain[2] board bin: 1, chip bin: 3, chip ft: A4V4, chip version: AB
    2021-08-23 18:25:56:driver-btm-api.c:2045:get_calibration_voltage: calibration voltage flag is error data.
    2021-08-23 18:25:56 voltage[0] = 1840
    2021-08-23 18:25:56 voltage[1] = 1840
    2021-08-23 18:25:56 voltage[2] = 1840
    2021-08-23 18:25:56:auto_adapt.c:273:is_sweep_failed_before: open sweep tag failed
    voltage_ref = 1840
    2100 2100 2100 2100 2100
    2100 2100 2100 2100 2100
    2100 2100 2100 2100 2100
    2100 2100 2100 2100 2000
    2100 2100 2000 2000 2000
    2000 2000 2000 2000 1940
    2000 2000 1980 1980 1920
    1960 1940 1940 1920 1860
    1940 1900 1880 1860 1860

    2021-08-23 18:25:56:thread.c:1163:create_read_nonce_reg_thread: create thread
    2021-08-23 18:25:56:driver-btm-api.c:617:dump_pcb_bom_version: Chain [0] PCB Version: 0x010a
    2021-08-23 18:25:56:driver-btm-api.c:618:dump_pcb_bom_version: Chain [0] BOM Version: 0x0100
    2021-08-23 18:25:56:driver-btm-api.c:617:dump_pcb_bom_version: Chain [1] PCB Version: 0x010a
    2021-08-23 18:25:56:driver-btm-api.c:618:dump_pcb_bom_version: Chain [1] BOM Version: 0x0100
    2021-08-23 18:25:56:driver-btm-api.c:617:dump_pcb_bom_version: Chain [2] PCB Version: 0x010a
    2021-08-23 18:25:56:driver-btm-api.c:618:dump_pcb_bom_version: Chain [2] BOM Version: 0x0100
    2021-08-23 18:25:58:driver-btm-api.c:2216:bitmain_board_init: Fan check passed.
    2021-08-23 18:25:59:board.c:81:jump_and_app_check_restore_pic: chain[0] PIC jump to app
    2021-08-23 18:26:01:board.c:94:jump_and_app_check_restore_pic: Check chain[0] PIC fw version=0x88
    2021-08-23 18:26:02:board.c:81:jump_and_app_check_restore_pic: chain[1] PIC jump to app
    2021-08-23 18:26:04:board.c:94:jump_and_app_check_restore_pic: Check chain[1] PIC fw version=0x88
    2021-08-23 18:26:05:board.c:81:jump_and_app_check_restore_pic: chain[2] PIC jump to app
    2021-08-23 18:26:07:board.c:94:jump_and_app_check_restore_pic: Check chain[2] PIC fw version=0x88
    2021-08-23 18:26:07:thread.c:1158:create_pic_heart_beat_thread: create thread
    2021-08-23 18:26:09:power_api.c:241:power_init: power type version: 0x0042
    2021-08-23 18:26:09:power_api.c:259:power_init: Power init:
    2021-08-23 18:26:09:power_api.c:260:power_init: current_voltage_raw = 0
    2021-08-23 18:26:09:power_api.c:261:power_init: highest_voltage_raw = 2000
    2021-08-23 18:26:09:power_api.c:262:power_init: working_voltage_raw = 1800
    2021-08-23 18:26:09:power_api.c:263:power_init: higher_voltage_raw = 1850
    2021-08-23 18:26:09:power_api.c:264:power_init: check_asic_voltage_raw = 1800
    2021-08-23 18:26:09:driver-btm-api.c:2226:bitmain_board_init: Enter 60s sleep to make sure power release finish.

    0
    Comment actions Permalink

Please sign in to leave a comment.