Antminer T17 Sensor problem

sanquiz

April 23, 2020 00:45

I have a Antminer T17 who wont hash. It finds ASIC's, but gives this error:

Booting Linux on physical CPU 0x0
Linux version 4.6.0-xilinx-gff8137b-dirty (lzq@armdev2) (gcc version 4.8.3 20140320 (prerelease) (Sourcery CodeBench Lite 2014.05-23) ) #25 SMP PREEMPT Fri Nov 23 15:30:52 CST 2018
CPU: ARMv7 Processor [413fc090] revision 0 (ARMv7), cr=18c5387d
CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
Machine model: Xilinx Zynq
cma: Reserved 16 MiB at 0x0e000000
Memory policy: Data cache writealloc
On node 0 totalpages: 61440
free_area_init_node: node 0, pgdat c0b39280, node_mem_map cde10000
Normal zone: 480 pages used for memmap
Normal zone: 0 pages reserved
Normal zone: 61440 pages, LIFO batch:15
percpu: Embedded 12 pages/cpu @cddf1000 s19776 r8192 d21184 u49152
pcpu-alloc: s19776 r8192 d21184 u49152 alloc=12*4096
pcpu-alloc: [0] 0 [0] 1
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 60960
Kernel command line: mem=240M console=ttyPS0,115200 ramdisk_size=33554432 root=/dev/ram rw earlyprintk
PID hash table entries: 1024 (order: 0, 4096 bytes)
Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
Memory: 203756K/245760K available (6345K kernel code, 231K rwdata, 1896K rodata, 1024K init, 223K bss, 25620K reserved, 16384K cma-reserved, 0K highmem)
Virtual kernel memory layout:
vector : 0xffff0000 - 0xffff1000 ( 4 kB)
fixmap : 0xffc00000 - 0xfff00000 (3072 kB)
vmalloc : 0xcf800000 - 0xff800000 ( 768 MB)
lowmem : 0xc0000000 - 0xcf000000 ( 240 MB)
pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
modules : 0xbf000000 - 0xbfe00000 ( 14 MB)
.text : 0xc0008000 - 0xc090c424 (9234 kB)
.init : 0xc0a00000 - 0xc0b00000 (1024 kB)
.data : 0xc0b00000 - 0xc0b39fe0 ( 232 kB)
.bss : 0xc0b39fe0 - 0xc0b71c28 ( 224 kB)
Preemptible hierarchical RCU implementation.
Build-time adjustment of leaf fanout to 32.
RCU restricting CPUs from NR_CPUS=4 to nr_cpu_ids=2.
RCU: Adjusting geometry for rcu_fanout_leaf=32, nr_cpu_ids=2
NR_IRQS:16 nr_irqs:16 16
efuse mapped to cf800000
ps7-slcr mapped to cf802000
L2C: platform modifies aux control register: 0x72360000 -> 0x72760000
L2C: DT/platform modifies aux control register: 0x72360000 -> 0x72760000
L2C-310 erratum 769419 enabled
L2C-310 enabling early BRESP for Cortex-A9
L2C-310 full line of zeros enabled for Cortex-A9
L2C-310 ID prefetch enabled, offset 1 lines
L2C-310 dynamic clock gating enabled, standby mode enabled
L2C-310 cache controller enabled, 8 ways, 512 kB
L2C-310: CACHE_ID 0x410000c8, AUX_CTRL 0x76760001
zynq_clock_init: clkc starts at cf802100
Zynq clock init
sched_clock: 64 bits at 333MHz, resolution 3ns, wraps every 4398046511103ns
clocksource: arm_global_timer: mask: 0xffffffffffffffff max_cycles: 0x4ce07af025, max_idle_ns: 440795209040 ns
Switching to timer-based delay loop, resolution 3ns
clocksource: ttc_clocksource: mask: 0xffff max_cycles: 0xffff, max_idle_ns: 537538477 ns
ps7-ttc #0 at cf80a000, irq=18
Console: colour dummy device 80x30
Calibrating delay loop (skipped), value calculated using timer frequency.. 666.66 BogoMIPS (lpj=3333333)
pid_max: default: 32768 minimum: 301
Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
CPU: Testing write buffer coherency: ok
CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
Setting up static identity map for 0x100000 - 0x100058
CPU1: failed to boot: -1
Brought up 1 CPUs
SMP: Total of 1 processors activated (666.66 BogoMIPS).
CPU: All CPU(s) started in SVC mode.
devtmpfs: initialized
VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 4
clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
pinctrl core: initialized pinctrl subsystem
NET: Registered protocol family 16
DMA: preallocated 256 KiB pool for atomic coherent allocations
cpuidle: using governor menu
hw-breakpoint: found 5 (+1 reserved) breakpoint and 1 watchpoint registers.
hw-breakpoint: maximum watchpoint size is 4 bytes.
zynq-ocm f800c000.ps7-ocmc: ZYNQ OCM pool: 256 KiB @ 0xcf880000
vgaarb: loaded
SCSI subsystem initialized
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
media: Linux media interface: v0.10
Linux video capture interface: v2.00
pps_core: LinuxPPS API ver. 1 registered
pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
PTP clock support registered
EDAC MC: Ver: 3.0.0
Advanced Linux Sound Architecture Driver Initialized.
clocksource: Switched to clocksource arm_global_timer
NET: Registered protocol family 2
TCP established hash table entries: 2048 (order: 1, 8192 bytes)
TCP bind hash table entries: 2048 (order: 2, 16384 bytes)
TCP: Hash tables configured (established 2048 bind 2048)
UDP hash table entries: 256 (order: 1, 8192 bytes)
UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
NET: Registered protocol family 1
RPC: Registered named UNIX socket transport module.
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
RPC: Registered tcp NFSv4.1 backchannel transport module.
PCI: CLS 0 bytes, default 64
Trying to unpack rootfs image as initramfs...
rootfs image is not initramfs (no cpio magic); looks like an initrd
Freeing initrd memory: 12580K (cceb8000 - cdb01000)
hw perfevents: enabled with armv7_cortex_a9 PMU driver, 7 counters available
futex hash table entries: 512 (order: 3, 32768 bytes)
workingset: timestamp_bits=28 max_order=16 bucket_order=0
jffs2: version 2.2. (NAND) (SUMMARY) © 2001-2006 Red Hat, Inc.
io scheduler noop registered
io scheduler deadline registered
io scheduler cfq registered (default)
dma-pl330 f8003000.ps7-dma: Loaded driver for PL330 DMAC-241330
dma-pl330 f8003000.ps7-dma: DBUFF-128x8bytes Num_Chans-8 Num_Peri-4 Num_Events-16
e0000000.serial: ttyPS0 at MMIO 0xe0000000 (irq = 158, base_baud = 6249999) is a xuartps
console [ttyPS0] enabled
xdevcfg f8007000.ps7-dev-cfg: ioremap 0xf8007000 to cf86e000
[drm] Initialized drm 1.1.0 20060810
brd: module loaded
loop: module loaded
CAN device driver interface
gpiod_set_value: invalid GPIO
libphy: MACB_mii_bus: probed
macb e000b000.ethernet eth0: Cadence GEM rev 0x00020118 at 0xe000b000 irq 31 (00:0a:35:00:00:00)
Generic PHY e000b000.etherne:00: attached PHY driver [Generic PHY] (mii_bus:phy_addr=e000b000.etherne:00, irq=-1)
e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k
e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci-pci: EHCI PCI platform driver
usbcore: registered new interface driver usb-storage
mousedev: PS/2 mouse device common for all mice
i2c /dev entries driver
Xilinx Zynq CpuIdle Driver started
sdhci: Secure Digital Host Controller Interface driver
sdhci: Copyright(c) Pierre Ossman
sdhci-pltfm: SDHCI platform and OF driver helper
mmc0: SDHCI controller on e0100000.ps7-sdio [e0100000.ps7-sdio] using ADMA
ledtrig-cpu: registered to indicate activity on CPUs
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
nand: device found, Manufacturer ID: 0x2c, Chip ID: 0xda
nand: Micron MT29F2G08ABAGAWP
nand: 256 MiB, SLC, erase size: 128 KiB, page size: 2048, OOB size: 128
nand: WARNING: pl35x-nand: the ECC used on your system is too weak compared to the one required by the NAND chip
Bad block table found at page 131008, version 0x01
Bad block table found at page 130944, version 0x01
6 ofpart partitions found on MTD device pl35x-nand
Creating 6 MTD partitions on "pl35x-nand":
0x000000000000-0x000002800000 : "BOOT.bin-env-dts-kernel"
0x000002800000-0x000004800000 : "ramfs"
0x000004800000-0x000005000000 : "configs"
0x000005000000-0x000006000000 : "reserve"
0x000006000000-0x000008000000 : "ramfs-bak"
0x000008000000-0x000010000000 : "reserve1"
NET: Registered protocol family 10
sit: IPv6 over IPv4 tunneling driver
NET: Registered protocol family 17
can: controller area network core (rev 20120528 abi 9)
NET: Registered protocol family 29
can: raw protocol (rev 20120528)
can: broadcast manager protocol (rev 20120528 t)
can: netlink gateway (rev 20130117) max_hops=1
zynq_pm_ioremap: no compatible node found for 'xlnx,zynq-ddrc-a05'
zynq_pm_late_init: Unable to map DDRC IO memory.
Registering SWP/SWPB emulation handler
hctosys: unable to open rtc device (rtc0)
ALSA device list:
No soundcards found.
RAMDISK: gzip image found at block 0
EXT4-fs (ram0): couldn't mount as ext3 due to feature incompatibilities
EXT4-fs (ram0): mounted filesystem without journal. Opts: (null)
VFS: Mounted root (ext4 filesystem) on device 1:0.
devtmpfs: mounted
Freeing unused kernel memory: 1024K (c0a00000 - c0b00000)
EXT4-fs (ram0): re-mounted. Opts: block_validity,delalloc,barrier,user_xattr
random: dd urandom read with 0 bits of entropy available
ubi0: attaching mtd2
ubi0: scanning is finished
ubi0: attached mtd2 (name "configs", size 8 MiB)
ubi0: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes
ubi0: min./max. I/O unit sizes: 2048/2048, sub-page size 2048
ubi0: VID header offset: 2048 (aligned 2048), data offset: 4096
ubi0: good PEBs: 64, bad PEBs: 0, corrupted PEBs: 0
ubi0: user volume: 1, internal volumes: 1, max. volumes count: 128
ubi0: max/mean erase counter: 12/5, WL threshold: 4096, image sequence number: 306349061
ubi0: available PEBs: 0, total reserved PEBs: 64, PEBs reserved for bad PEB handling: 40
ubi0: background thread "ubi_bgt0d" started, PID 708
UBIFS (ubi0:0): background thread "ubifs_bgt0_0" started, PID 711
UBIFS (ubi0:0): UBIFS: mounted UBI device 0, volume 0, name "configs"
UBIFS (ubi0:0): LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
UBIFS (ubi0:0): FS size: 1396736 bytes (1 MiB, 11 LEBs), journal size 888833 bytes (0 MiB, 5 LEBs)
UBIFS (ubi0:0): reserved for root: 65970 bytes (64 KiB)
UBIFS (ubi0:0): media format: w4/r0 (latest is w4/r0), UUID 038216C1-D266-46DA-A76E-C04B142933A3, small LPT model
ubi1: attaching mtd5
ubi1: scanning is finished
ubi1: attached mtd5 (name "reserve1", size 128 MiB)
ubi1: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes
ubi1: min./max. I/O unit sizes: 2048/2048, sub-page size 2048
ubi1: VID header offset: 2048 (aligned 2048), data offset: 4096
ubi1: good PEBs: 1020, bad PEBs: 4, corrupted PEBs: 0
ubi1: user volume: 1, internal volumes: 1, max. volumes count: 128
ubi1: max/mean erase counter: 52/16, WL threshold: 4096, image sequence number: 1751317449
ubi1: available PEBs: 0, total reserved PEBs: 1020, PEBs reserved for bad PEB handling: 36
ubi1: background thread "ubi_bgt1d" started, PID 720
UBIFS (ubi1:0): background thread "ubifs_bgt1_0" started, PID 723
UBIFS (ubi1:0): UBIFS: mounted UBI device 1, volume 0, name "reserve1"
UBIFS (ubi1:0): LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
UBIFS (ubi1:0): FS size: 123039744 bytes (117 MiB, 969 LEBs), journal size 6221824 bytes (5 MiB, 49 LEBs)
UBIFS (ubi1:0): reserved for root: 4952683 bytes (4836 KiB)
UBIFS (ubi1:0): media format: w4/r0 (latest is w4/r0), UUID 51C7124B-A562-4AA0-948B-184BE8DB9030, small LPT model
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
macb e000b000.ethernet eth0: unable to generate target frequency: 25000000 Hz
macb e000b000.ethernet eth0: link up (100/Full)
IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
In axi fpga driver!
request_mem_region OK!
AXI fpga dev virtual address is 0xcfb38000
*base_vir_addr = 0xab013
In fpga mem driver!
request_mem_region OK!
fpga mem virtual address is 0xd2000000
2020-04-23 00:41:15 driver-btm-api.c:631:init_freq_mode: This is scan-user version
2020-04-23 00:41:15 driver-btm-api.c:1994:bitmain_soc_init: opt_multi_version = 1
2020-04-23 00:41:15 driver-btm-api.c:1995:bitmain_soc_init: opt_bitmain_ab = 1
2020-04-23 00:41:15 driver-btm-api.c:1996:bitmain_soc_init: opt_bitmain_work_mode = 0
2020-04-23 00:41:15 driver-btm-api.c:1997:bitmain_soc_init: Miner compile time: Tue Dec 24 16:13:07 CST 2019 type: Antminer T17
2020-04-23 00:41:15 driver-btm-api.c:1998:bitmain_soc_init: commit version: e93a09b 2019-12-24 16:03:45, build by: lol 2019-12-24 16:19:49
2020-04-23 00:41:15 driver-btm-api.c:1810:show_sn: no SN got, please write SN to /nvdata/sn
2020-04-23 00:41:15 driver-btm-api.c:1135:miner_device_init: Detect 256MB control board of XILINX
2020-04-23 00:41:15 driver-btm-api.c:1083:init_fan_parameter: fan_eft : 0 fan_pwm : 0
2020-04-23 00:41:15 thread.c:789:create_read_nonce_reg_thread: create thread
2020-04-23 00:41:21 driver-btm-api.c:1067:init_miner_version: miner ID : 805c6d267910481c
2020-04-23 00:41:21 driver-btm-api.c:1073:init_miner_version: FPGA Version = 0xB013
2020-04-23 00:41:23 eeprom.c:431:check_pattern_test_level: L1 board
2020-04-23 00:41:24 eeprom.c:441:check_pattern_test_level: L3 board
2020-04-23 00:41:24 driver-btm-api.c:705:get_product_id: product_id[0] = 1
2020-04-23 00:41:24 driver-btm-api.c:705:get_product_id: product_id[1] = 1
2020-04-23 00:41:24 driver-btm-api.c:1633:get_ccdly_opt: ccdly_opt[0] = 1
2020-04-23 00:41:24 driver-btm-api.c:1633:get_ccdly_opt: ccdly_opt[1] = 1
2020-04-23 00:41:24 driver-btm-api.c:1877:bitmain_board_init: g_ccdly_opt = 1
2020-04-23 00:41:24 driver-btm-api.c:644:_set_project_type: project:2
2020-04-23 00:41:24 driver-btm-api.c:674:_set_project_type: Project type: Antminer T17
2020-04-23 00:41:24 driver-btm-api.c:685:dump_pcb_bom_version: Chain [0] PCB Version: 0x0100
2020-04-23 00:41:24 driver-btm-api.c:686:dump_pcb_bom_version: Chain [0] BOM Version: 0x0100
2020-04-23 00:41:24 driver-btm-api.c:685:dump_pcb_bom_version: Chain [1] PCB Version: 0x0100
2020-04-23 00:41:24 driver-btm-api.c:686:dump_pcb_bom_version: Chain [1] BOM Version: 0x0100
2020-04-23 00:41:27 driver-btm-api.c:1897:bitmain_board_init: Fan check passed.
2020-04-23 00:41:29 board.c:36:jump_and_app_check_restore_pic: chain[0] PIC jump to app
2020-04-23 00:41:33 board.c:40:jump_and_app_check_restore_pic: Check chain[0] PIC fw version=0xb9
2020-04-23 00:41:34 board.c:36:jump_and_app_check_restore_pic: chain[1] PIC jump to app
2020-04-23 00:41:38 board.c:40:jump_and_app_check_restore_pic: Check chain[1] PIC fw version=0xb9
2020-04-23 00:41:38 thread.c:784:create_pic_heart_beat_thread: create thread
2020-04-23 00:41:38 power_api.c:55:power_init: power init ...
2020-04-23 00:41:38 driver-btm-api.c:1907:bitmain_board_init: Enter 30s sleep to make sure power release finish.
2020-04-23 00:42:10 power_api.c:232:set_iic_power_to_highest_voltage: setting to voltage: 17.00 ...
2020-04-23 00:42:12 power_api.c:124:check_voltage_multi: retry time: 0
2020-04-23 00:42:13 power_api.c:86:get_average_voltage: chain[0], voltage is: 17.095547
2020-04-23 00:42:15 power_api.c:86:get_average_voltage: chain[1], voltage is: 17.120039
2020-04-23 00:42:15 power_api.c:97:get_average_voltage: aveage voltage is: 17.107793
2020-04-23 00:42:15 power_api.c:182:set_iic_power_by_voltage: now set voltage to : 17.000000
2020-04-23 00:42:15 driver-hash-chip.c:233:dhash_chip_set_baud_v2: chain[0]: chip baud = 115200, chip_divider = 26
2020-04-23 00:42:15 driver-hash-chip.c:233:dhash_chip_set_baud_v2: chain[1]: chip baud = 115200, chip_divider = 26
2020-04-23 00:42:15 uart.c:80:set_baud: set fpga_baud = 115200, fpga_divider = 26
2020-04-23 00:42:25 driver-btm-api.c:1010:check_asic_number_with_power_on: Chain[0]: find 30 asic, times 0
2020-04-23 00:42:35 driver-btm-api.c:1010:check_asic_number_with_power_on: Chain[1]: find 30 asic, times 0
2020-04-23 00:42:37 driver-btm-api.c:348:set_order_clock: chain[0]: set order clock, stragegy 3 clock_en=0x1
2020-04-23 00:42:38 driver-btm-api.c:348:set_order_clock: chain[1]: set order clock, stragegy 3 clock_en=0x1
2020-04-23 00:42:38 driver-hash-chip.c:490:set_clock_delay_control: core_data = 0xb4
2020-04-23 00:42:38 driver-hash-chip.c:233:dhash_chip_set_baud_v2: chain[0]: chip baud = 3000000, chip_divider = 0
2020-04-23 00:42:38 driver-hash-chip.c:233:dhash_chip_set_baud_v2: chain[1]: chip baud = 3000000, chip_divider = 0
2020-04-23 00:42:38 uart.c:80:set_baud: set fpga_baud = 3000000, fpga_divider = 0
2020-04-23 00:42:38 driver-btm-api.c:1660:check_clock_counter: freq 50 clock_counter_limit 6
2020-04-23 00:42:38 driver-hash-chip.c:233:dhash_chip_set_baud_v2: chain[0]: chip baud = 115200, chip_divider = 26
2020-04-23 00:42:38 driver-hash-chip.c:233:dhash_chip_set_baud_v2: chain[1]: chip baud = 115200, chip_divider = 26
2020-04-23 00:42:38 uart.c:80:set_baud: set fpga_baud = 115200, fpga_divider = 26
2020-04-23 00:42:38 voltage[0] = 1690
2020-04-23 00:42:38 voltage[1] = 1690
2020-04-23 00:42:38 power_api.c:140:set_working_voltage: working_voltage = 16.900000
2020-04-23 00:42:39 temperature.c:203:is_temp_sensor_type_correct: Wrong temp sensor type, chain = 0, sensor = 6, type = 0x0, retry.
2020-04-23 00:42:39 temperature.c:203:is_temp_sensor_type_correct: Wrong temp sensor type, chain = 0, sensor = 6, type = 0x0, retry.
2020-04-23 00:42:40 temperature.c:203:is_temp_sensor_type_correct: Wrong temp sensor type, chain = 0, sensor = 6, type = 0x0, retry.
2020-04-23 00:42:40 temperature.c:203:is_temp_sensor_type_correct: Wrong temp sensor type, chain = 0, sensor = 6, type = 0x0, retry.
2020-04-23 00:42:40 driver-btm-api.c:201:set_miner_status: ERROR_TEMP_LOST
2020-04-23 00:42:40 driver-btm-api.c:142:stop_mining: stop mining: Can't get temperature sensor type!
2020-04-23 00:42:40 thread.c:834:cancel_read_nonce_reg_thread: cancel thread
2020-04-23 00:42:40 driver-btm-api.c:128:killall_hashboard: ****power off hashboard****

I disconect a board that only report 3 chips, one board giving sensor errors and one board working without problems

Any idea if theres anyway to fix this?

Thanx in advance for reply.

Comments

13 comments

Luke HAO-Technical Specialist

April 26, 2020 02:24
Hello Sanquiz

Please try to use SD card recovery image to recover the miner first, and then upgrade the latest firmware on our website.
0

Comment actions Permalink
Mikeywithyou

April 27, 2020 06:39
Hello Luke

My T17 is having a similar sensor issue, kernel log is:

Booting Linux on physical CPU 0x0
Linux version 4.6.0-xilinx-gff8137b-dirty (lzq@armdev2) (gcc version 4.8.3 20140320 (prerelease) (Sourcery CodeBench Lite 2014.05-23) ) #25 SMP PREEMPT Fri Nov 23 15:30:52 CST 2018
CPU: ARMv7 Processor [413fc090] revision 0 (ARMv7), cr=18c5387d
CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
Machine model: Xilinx Zynq
cma: Reserved 16 MiB at 0x0e000000
Memory policy: Data cache writealloc
On node 0 totalpages: 61440
free_area_init_node: node 0, pgdat c0b39280, node_mem_map cde10000
Normal zone: 480 pages used for memmap
Normal zone: 0 pages reserved
Normal zone: 61440 pages, LIFO batch:15
percpu: Embedded 12 pages/cpu @cddf1000 s19776 r8192 d21184 u49152
pcpu-alloc: s19776 r8192 d21184 u49152 alloc=12*4096
pcpu-alloc: [0] 0 [0] 1
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 60960
Kernel command line: mem=240M console=ttyPS0,115200 ramdisk_size=33554432 root=/dev/ram rw earlyprintk
PID hash table entries: 1024 (order: 0, 4096 bytes)
Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
Memory: 203756K/245760K available (6345K kernel code, 231K rwdata, 1896K rodata, 1024K init, 223K bss, 25620K reserved, 16384K cma-reserved, 0K highmem)
Virtual kernel memory layout:
vector : 0xffff0000 - 0xffff1000 ( 4 kB)
fixmap : 0xffc00000 - 0xfff00000 (3072 kB)
vmalloc : 0xcf800000 - 0xff800000 ( 768 MB)
lowmem : 0xc0000000 - 0xcf000000 ( 240 MB)
pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
modules : 0xbf000000 - 0xbfe00000 ( 14 MB)
.text : 0xc0008000 - 0xc090c424 (9234 kB)
.init : 0xc0a00000 - 0xc0b00000 (1024 kB)
.data : 0xc0b00000 - 0xc0b39fe0 ( 232 kB)
.bss : 0xc0b39fe0 - 0xc0b71c28 ( 224 kB)
Preemptible hierarchical RCU implementation.
Build-time adjustment of leaf fanout to 32.
RCU restricting CPUs from NR_CPUS=4 to nr_cpu_ids=2.
RCU: Adjusting geometry for rcu_fanout_leaf=32, nr_cpu_ids=2
NR_IRQS:16 nr_irqs:16 16
efuse mapped to cf800000
ps7-slcr mapped to cf802000
L2C: platform modifies aux control register: 0x72360000 -> 0x72760000
L2C: DT/platform modifies aux control register: 0x72360000 -> 0x72760000
L2C-310 erratum 769419 enabled
L2C-310 enabling early BRESP for Cortex-A9
L2C-310 full line of zeros enabled for Cortex-A9
L2C-310 ID prefetch enabled, offset 1 lines
L2C-310 dynamic clock gating enabled, standby mode enabled
L2C-310 cache controller enabled, 8 ways, 512 kB
L2C-310: CACHE_ID 0x410000c8, AUX_CTRL 0x76760001
zynq_clock_init: clkc starts at cf802100
Zynq clock init
sched_clock: 64 bits at 333MHz, resolution 3ns, wraps every 4398046511103ns
clocksource: arm_global_timer: mask: 0xffffffffffffffff max_cycles: 0x4ce07af025, max_idle_ns: 440795209040 ns
Switching to timer-based delay loop, resolution 3ns
clocksource: ttc_clocksource: mask: 0xffff max_cycles: 0xffff, max_idle_ns: 537538477 ns
ps7-ttc #0 at cf80a000, irq=18
Console: colour dummy device 80x30
Calibrating delay loop (skipped), value calculated using timer frequency.. 666.66 BogoMIPS (lpj=3333333)
pid_max: default: 32768 minimum: 301
Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
CPU: Testing write buffer coherency: ok
CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
Setting up static identity map for 0x100000 - 0x100058
CPU1: failed to boot: -1
Brought up 1 CPUs
SMP: Total of 1 processors activated (666.66 BogoMIPS).
CPU: All CPU(s) started in SVC mode.
devtmpfs: initialized
VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 4
clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
pinctrl core: initialized pinctrl subsystem
NET: Registered protocol family 16
DMA: preallocated 256 KiB pool for atomic coherent allocations
cpuidle: using governor menu
hw-breakpoint: found 5 (+1 reserved) breakpoint and 1 watchpoint registers.
hw-breakpoint: maximum watchpoint size is 4 bytes.
zynq-ocm f800c000.ps7-ocmc: ZYNQ OCM pool: 256 KiB @ 0xcf880000
vgaarb: loaded
SCSI subsystem initialized
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
media: Linux media interface: v0.10
Linux video capture interface: v2.00
pps_core: LinuxPPS API ver. 1 registered
pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
PTP clock support registered
EDAC MC: Ver: 3.0.0
Advanced Linux Sound Architecture Driver Initialized.
clocksource: Switched to clocksource arm_global_timer
NET: Registered protocol family 2
TCP established hash table entries: 2048 (order: 1, 8192 bytes)
TCP bind hash table entries: 2048 (order: 2, 16384 bytes)
TCP: Hash tables configured (established 2048 bind 2048)
UDP hash table entries: 256 (order: 1, 8192 bytes)
UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
NET: Registered protocol family 1
RPC: Registered named UNIX socket transport module.
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
RPC: Registered tcp NFSv4.1 backchannel transport module.
PCI: CLS 0 bytes, default 64
Trying to unpack rootfs image as initramfs...
rootfs image is not initramfs (no cpio magic); looks like an initrd
Freeing initrd memory: 12580K (cceb8000 - cdb01000)
hw perfevents: enabled with armv7_cortex_a9 PMU driver, 7 counters available
futex hash table entries: 512 (order: 3, 32768 bytes)
workingset: timestamp_bits=28 max_order=16 bucket_order=0
jffs2: version 2.2. (NAND) (SUMMARY) © 2001-2006 Red Hat, Inc.
io scheduler noop registered
io scheduler deadline registered
io scheduler cfq registered (default)
dma-pl330 f8003000.ps7-dma: Loaded driver for PL330 DMAC-241330
dma-pl330 f8003000.ps7-dma: DBUFF-128x8bytes Num_Chans-8 Num_Peri-4 Num_Events-16
e0000000.serial: ttyPS0 at MMIO 0xe0000000 (irq = 158, base_baud = 6249999) is a xuartps
console [ttyPS0] enabled
xdevcfg f8007000.ps7-dev-cfg: ioremap 0xf8007000 to cf86e000
[drm] Initialized drm 1.1.0 20060810
brd: module loaded
loop: module loaded
CAN device driver interface
gpiod_set_value: invalid GPIO
libphy: MACB_mii_bus: probed
macb e000b000.ethernet eth0: Cadence GEM rev 0x00020118 at 0xe000b000 irq 31 (00:0a:35:00:00:00)
Generic PHY e000b000.etherne:00: attached PHY driver [Generic PHY] (mii_bus:phy_addr=e000b000.etherne:00, irq=-1)
e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k
e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci-pci: EHCI PCI platform driver
usbcore: registered new interface driver usb-storage
mousedev: PS/2 mouse device common for all mice
i2c /dev entries driver
Xilinx Zynq CpuIdle Driver started
sdhci: Secure Digital Host Controller Interface driver
sdhci: Copyright(c) Pierre Ossman
sdhci-pltfm: SDHCI platform and OF driver helper
mmc0: SDHCI controller on e0100000.ps7-sdio [e0100000.ps7-sdio] using ADMA
ledtrig-cpu: registered to indicate activity on CPUs
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
nand: device found, Manufacturer ID: 0x2c, Chip ID: 0xda
nand: Micron MT29F2G08ABAGAWP
nand: 256 MiB, SLC, erase size: 128 KiB, page size: 2048, OOB size: 128
nand: WARNING: pl35x-nand: the ECC used on your system is too weak compared to the one required by the NAND chip
Bad block table found at page 131008, version 0x01
Bad block table found at page 130944, version 0x01
6 ofpart partitions found on MTD device pl35x-nand
Creating 6 MTD partitions on "pl35x-nand":
0x000000000000-0x000002800000 : "BOOT.bin-env-dts-kernel"
0x000002800000-0x000004800000 : "ramfs"
0x000004800000-0x000005000000 : "configs"
0x000005000000-0x000006000000 : "reserve"
0x000006000000-0x000008000000 : "ramfs-bak"
0x000008000000-0x000010000000 : "reserve1"
NET: Registered protocol family 10
sit: IPv6 over IPv4 tunneling driver
NET: Registered protocol family 17
can: controller area network core (rev 20120528 abi 9)
NET: Registered protocol family 29
can: raw protocol (rev 20120528)
can: broadcast manager protocol (rev 20120528 t)
can: netlink gateway (rev 20130117) max_hops=1
zynq_pm_ioremap: no compatible node found for 'xlnx,zynq-ddrc-a05'
zynq_pm_late_init: Unable to map DDRC IO memory.
Registering SWP/SWPB emulation handler
hctosys: unable to open rtc device (rtc0)
ALSA device list:
No soundcards found.
RAMDISK: gzip image found at block 0
EXT4-fs (ram0): couldn't mount as ext3 due to feature incompatibilities
EXT4-fs (ram0): mounted filesystem without journal. Opts: (null)
VFS: Mounted root (ext4 filesystem) on device 1:0.
devtmpfs: mounted
Freeing unused kernel memory: 1024K (c0a00000 - c0b00000)
EXT4-fs (ram0): re-mounted. Opts: block_validity,delalloc,barrier,user_xattr
random: dd urandom read with 0 bits of entropy available
ubi0: attaching mtd2
ubi0: scanning is finished
ubi0: attached mtd2 (name "configs", size 8 MiB)
ubi0: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes
ubi0: min./max. I/O unit sizes: 2048/2048, sub-page size 2048
ubi0: VID header offset: 2048 (aligned 2048), data offset: 4096
ubi0: good PEBs: 64, bad PEBs: 0, corrupted PEBs: 0
ubi0: user volume: 1, internal volumes: 1, max. volumes count: 128
ubi0: max/mean erase counter: 14/6, WL threshold: 4096, image sequence number: 72543235
ubi0: available PEBs: 0, total reserved PEBs: 64, PEBs reserved for bad PEB handling: 40
ubi0: background thread "ubi_bgt0d" started, PID 708
UBIFS (ubi0:0): background thread "ubifs_bgt0_0" started, PID 711
UBIFS (ubi0:0): UBIFS: mounted UBI device 0, volume 0, name "configs"
UBIFS (ubi0:0): LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
UBIFS (ubi0:0): FS size: 1396736 bytes (1 MiB, 11 LEBs), journal size 888833 bytes (0 MiB, 5 LEBs)
UBIFS (ubi0:0): reserved for root: 65970 bytes (64 KiB)
UBIFS (ubi0:0): media format: w4/r0 (latest is w4/r0), UUID D94047F6-1175-4366-977B-837CC879EE19, small LPT model
ubi1: attaching mtd5
ubi1: scanning is finished
ubi1: attached mtd5 (name "reserve1", size 128 MiB)
ubi1: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes
ubi1: min./max. I/O unit sizes: 2048/2048, sub-page size 2048
ubi1: VID header offset: 2048 (aligned 2048), data offset: 4096
ubi1: good PEBs: 1020, bad PEBs: 4, corrupted PEBs: 0
ubi1: user volume: 1, internal volumes: 1, max. volumes count: 128
ubi1: max/mean erase counter: 258/99, WL threshold: 4096, image sequence number: 3389548455
ubi1: available PEBs: 0, total reserved PEBs: 1020, PEBs reserved for bad PEB handling: 36
ubi1: background thread "ubi_bgt1d" started, PID 720
UBIFS (ubi1:0): background thread "ubifs_bgt1_0" started, PID 723
UBIFS (ubi1:0): UBIFS: mounted UBI device 1, volume 0, name "reserve1"
UBIFS (ubi1:0): LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
UBIFS (ubi1:0): FS size: 123039744 bytes (117 MiB, 969 LEBs), journal size 6221824 bytes (5 MiB, 49 LEBs)
UBIFS (ubi1:0): reserved for root: 4952683 bytes (4836 KiB)
UBIFS (ubi1:0): media format: w4/r0 (latest is w4/r0), UUID 721E72E7-F382-4130-AD9F-6C10D9102537, small LPT model
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
macb e000b000.ethernet eth0: unable to generate target frequency: 25000000 Hz
macb e000b000.ethernet eth0: link up (100/Full)
IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
In axi fpga driver!
request_mem_region OK!
AXI fpga dev virtual address is 0xcfb38000
*base_vir_addr = 0xab013
In fpga mem driver!
request_mem_region OK!
fpga mem virtual address is 0xd2000000
random: nonblocking pool is initialized
2020-04-27 06:04:23 driver-btm-api.c:631:init_freq_mode: This is scan-user version
2020-04-27 06:04:23 driver-btm-api.c:1994:bitmain_soc_init: opt_multi_version = 1
2020-04-27 06:04:23 driver-btm-api.c:1995:bitmain_soc_init: opt_bitmain_ab = 1
2020-04-27 06:04:23 driver-btm-api.c:1996:bitmain_soc_init: opt_bitmain_work_mode = 0
2020-04-27 06:04:23 driver-btm-api.c:1997:bitmain_soc_init: Miner compile time: Tue Dec 24 16:13:07 CST 2019 type: Antminer T17
2020-04-27 06:04:23 driver-btm-api.c:1998:bitmain_soc_init: commit version: e93a09b 2019-12-24 16:03:45, build by: lol 2019-12-24 16:19:49
2020-04-27 06:04:23 driver-btm-api.c:1810:show_sn: no SN got, please write SN to /nvdata/sn
2020-04-27 06:04:23 driver-btm-api.c:1135:miner_device_init: Detect 256MB control board of XILINX
2020-04-27 06:04:23 driver-btm-api.c:1083:init_fan_parameter: fan_eft : 1 fan_pwm : 90
2020-04-27 06:04:23 thread.c:789:create_read_nonce_reg_thread: create thread
2020-04-27 06:04:29 driver-btm-api.c:1067:init_miner_version: miner ID : 8030ed2a18c0885c
2020-04-27 06:04:29 driver-btm-api.c:1073:init_miner_version: FPGA Version = 0xB013
2020-04-27 06:04:31 eeprom.c:431:check_pattern_test_level: L1 board
2020-04-27 06:04:33 eeprom.c:431:check_pattern_test_level: L1 board
2020-04-27 06:04:35 eeprom.c:431:check_pattern_test_level: L1 board
2020-04-27 06:04:35 driver-btm-api.c:705:get_product_id: product_id[0] = 1
2020-04-27 06:04:35 driver-btm-api.c:705:get_product_id: product_id[1] = 1
2020-04-27 06:04:35 driver-btm-api.c:705:get_product_id: product_id[2] = 1
2020-04-27 06:04:35 driver-btm-api.c:1633:get_ccdly_opt: ccdly_opt[0] = 1
2020-04-27 06:04:35 driver-btm-api.c:1633:get_ccdly_opt: ccdly_opt[1] = 1
2020-04-27 06:04:35 driver-btm-api.c:1633:get_ccdly_opt: ccdly_opt[2] = 1
2020-04-27 06:04:35 driver-btm-api.c:1877:bitmain_board_init: g_ccdly_opt = 1
2020-04-27 06:04:35 driver-btm-api.c:644:_set_project_type: project:2
2020-04-27 06:04:35 driver-btm-api.c:674:_set_project_type: Project type: Antminer T17
2020-04-27 06:04:35 driver-btm-api.c:685:dump_pcb_bom_version: Chain [0] PCB Version: 0x0100
2020-04-27 06:04:35 driver-btm-api.c:686:dump_pcb_bom_version: Chain [0] BOM Version: 0x0100
2020-04-27 06:04:35 driver-btm-api.c:685:dump_pcb_bom_version: Chain [1] PCB Version: 0x0100
2020-04-27 06:04:35 driver-btm-api.c:686:dump_pcb_bom_version: Chain [1] BOM Version: 0x0100
2020-04-27 06:04:35 driver-btm-api.c:685:dump_pcb_bom_version: Chain [2] PCB Version: 0x0100
2020-04-27 06:04:35 driver-btm-api.c:686:dump_pcb_bom_version: Chain [2] BOM Version: 0x0100
2020-04-27 06:04:36 driver-btm-api.c:1897:bitmain_board_init: Fan check passed.
2020-04-27 06:04:36 register.c:283:get_register: !!! reg crc error
2020-04-27 06:04:37 board.c:36:jump_and_app_check_restore_pic: chain[0] PIC jump to app
2020-04-27 06:04:41 board.c:40:jump_and_app_check_restore_pic: Check chain[0] PIC fw version=0xb9
2020-04-27 06:04:43 board.c:36:jump_and_app_check_restore_pic: chain[1] PIC jump to app
2020-04-27 06:04:46 board.c:40:jump_and_app_check_restore_pic: Check chain[1] PIC fw version=0xb9
2020-04-27 06:04:48 board.c:36:jump_and_app_check_restore_pic: chain[2] PIC jump to app
2020-04-27 06:04:51 board.c:40:jump_and_app_check_restore_pic: Check chain[2] PIC fw version=0xb9
2020-04-27 06:04:51 thread.c:784:create_pic_heart_beat_thread: create thread
2020-04-27 06:04:51 power_api.c:55:power_init: power init ...
2020-04-27 06:04:51 driver-btm-api.c:1907:bitmain_board_init: Enter 30s sleep to make sure power release finish.
2020-04-27 06:05:23 power_api.c:232:set_iic_power_to_highest_voltage: setting to voltage: 17.00 ...
2020-04-27 06:05:29 power_api.c:124:check_voltage_multi: retry time: 0
2020-04-27 06:05:31 power_api.c:86:get_average_voltage: chain[0], voltage is: 17.530283
2020-04-27 06:05:33 power_api.c:86:get_average_voltage: chain[1], voltage is: 17.040439
2020-04-27 06:05:34 power_api.c:86:get_average_voltage: chain[2], voltage is: 16.734287
2020-04-27 06:05:34 power_api.c:97:get_average_voltage: aveage voltage is: 17.101670
2020-04-27 06:05:34 power_api.c:182:set_iic_power_by_voltage: now set voltage to : 17.000000
2020-04-27 06:05:34 driver-hash-chip.c:233:dhash_chip_set_baud_v2: chain[0]: chip baud = 115200, chip_divider = 26
2020-04-27 06:05:34 driver-hash-chip.c:233:dhash_chip_set_baud_v2: chain[1]: chip baud = 115200, chip_divider = 26
2020-04-27 06:05:34 driver-hash-chip.c:233:dhash_chip_set_baud_v2: chain[2]: chip baud = 115200, chip_divider = 26
2020-04-27 06:05:35 uart.c:80:set_baud: set fpga_baud = 115200, fpga_divider = 26
2020-04-27 06:05:46 driver-btm-api.c:1010:check_asic_number_with_power_on: Chain[0]: find 30 asic, times 0
2020-04-27 06:05:56 driver-btm-api.c:1010:check_asic_number_with_power_on: Chain[1]: find 30 asic, times 0
2020-04-27 06:06:06 driver-btm-api.c:1010:check_asic_number_with_power_on: Chain[2]: find 30 asic, times 0
2020-04-27 06:06:10 driver-btm-api.c:348:set_order_clock: chain[0]: set order clock, stragegy 3 clock_en=0x1
2020-04-27 06:06:10 driver-btm-api.c:348:set_order_clock: chain[1]: set order clock, stragegy 3 clock_en=0x1
2020-04-27 06:06:10 driver-btm-api.c:348:set_order_clock: chain[2]: set order clock, stragegy 3 clock_en=0x1
2020-04-27 06:06:10 driver-hash-chip.c:490:set_clock_delay_control: core_data = 0xb4
2020-04-27 06:06:10 driver-hash-chip.c:233:dhash_chip_set_baud_v2: chain[0]: chip baud = 3000000, chip_divider = 0
2020-04-27 06:06:10 driver-hash-chip.c:233:dhash_chip_set_baud_v2: chain[1]: chip baud = 3000000, chip_divider = 0
2020-04-27 06:06:10 driver-hash-chip.c:233:dhash_chip_set_baud_v2: chain[2]: chip baud = 3000000, chip_divider = 0
2020-04-27 06:06:10 uart.c:80:set_baud: set fpga_baud = 3000000, fpga_divider = 0
2020-04-27 06:06:10 driver-btm-api.c:1660:check_clock_counter: freq 50 clock_counter_limit 6
2020-04-27 06:06:11 driver-hash-chip.c:233:dhash_chip_set_baud_v2: chain[0]: chip baud = 115200, chip_divider = 26
2020-04-27 06:06:11 driver-hash-chip.c:233:dhash_chip_set_baud_v2: chain[1]: chip baud = 115200, chip_divider = 26
2020-04-27 06:06:11 driver-hash-chip.c:233:dhash_chip_set_baud_v2: chain[2]: chip baud = 115200, chip_divider = 26
2020-04-27 06:06:11 uart.c:80:set_baud: set fpga_baud = 115200, fpga_divider = 26
2020-04-27 06:06:11 voltage[0] = 1690
2020-04-27 06:06:11 voltage[1] = 1690
2020-04-27 06:06:11 voltage[2] = 1690
2020-04-27 06:06:11 power_api.c:140:set_working_voltage: working_voltage = 16.900000
2020-04-27 06:06:12 temperature.c:282:calibrate_temp_sensor_one_chain: Temperature sensor calibration: chain 0 success.
2020-04-27 06:06:14 temperature.c:282:calibrate_temp_sensor_one_chain: Temperature sensor calibration: chain 1 success.
2020-04-27 06:06:15 temperature.c:282:calibrate_temp_sensor_one_chain: Temperature sensor calibration: chain 2 success.
2020-04-27 06:06:15 driver-hash-chip.c:233:dhash_chip_set_baud_v2: chain[0]: chip baud = 6000000, chip_divider = 7
2020-04-27 06:06:15 driver-hash-chip.c:233:dhash_chip_set_baud_v2: chain[1]: chip baud = 6000000, chip_divider = 7
2020-04-27 06:06:15 driver-hash-chip.c:233:dhash_chip_set_baud_v2: chain[2]: chip baud = 6000000, chip_divider = 7
2020-04-27 06:06:15 uart.c:80:set_baud: set fpga_baud = 6000000, fpga_divider = 3
2020-04-27 06:06:22 temperature.c:697:get_temp_info: read temp sensor failed: chain = 1, sensor = 0, chip = 64, reg = 0
2020-04-27 06:06:35 temperature.c:697:get_temp_info: read temp sensor failed: chain = 1, sensor = 0, chip = 64, reg = 1
2020-04-27 06:06:42 temperature.c:697:get_temp_info: read temp sensor failed: chain = 1, sensor = 1, chip = 48, reg = 0
2020-04-27 06:06:55 temperature.c:697:get_temp_info: read temp sensor failed: chain = 1, sensor = 1, chip = 48, reg = 1
2020-04-27 06:07:01 temperature.c:697:get_temp_info: read temp sensor failed: chain = 1, sensor = 2, chip = 168, reg = 0
2020-04-27 06:07:15 temperature.c:697:get_temp_info: read temp sensor failed: chain = 1, sensor = 2, chip = 168, reg = 1
2020-04-27 06:07:21 temperature.c:697:get_temp_info: read temp sensor failed: chain = 1, sensor = 3, chip = 184, reg = 0
2020-04-27 06:07:34 temperature.c:697:get_temp_info: read temp sensor failed: chain = 1, sensor = 3, chip = 184, reg = 1
2020-04-27 06:07:35 driver-btm-api.c:248:check_bringup_temp: Bring up temperature is 17
2020-04-27 06:07:35 thread.c:804:create_check_miner_status_thread: create thread
2020-04-27 06:07:35 thread.c:794:create_set_miner_status_thread: create thread
2020-04-27 06:07:35 driver-btm-api.c:581:calculate_timeout: dev->timeout = 392
2020-04-27 06:07:35 thread.c:779:create_temperature_monitor_thread: create thread
2020-04-27 06:07:35 freq_tuning.c:154:freq_tuning_get_max_freq: Max freq of tuning is 760
2020-04-27 06:07:35 power_api.c:379:slowly_set_iic_power_to_custom_voltage: slowly setting to voltage: 17.80 ...
2020-04-27 06:07:42 temperature.c:697:get_temp_info: read temp sensor failed: chain = 1, sensor = 0, chip = 64, reg = 0
2020-04-27 06:07:55 temperature.c:697:get_temp_info: read temp sensor failed: chain = 1, sensor = 0, chip = 64, reg = 1
2020-04-27 06:08:02 temperature.c:697:get_temp_info: read temp sensor failed: chain = 1, sensor = 1, chip = 48, reg = 0
2020-04-27 06:08:10 power_api.c:124:check_voltage_multi: retry time: 0
2020-04-27 06:08:11 power_api.c:86:get_average_voltage: chain[0], voltage is: 17.664990
2020-04-27 06:08:13 power_api.c:86:get_average_voltage: chain[1], voltage is: 17.750713
2020-04-27 06:08:15 temperature.c:697:get_temp_info: read temp sensor failed: chain = 1, sensor = 1, chip = 48, reg = 1
2020-04-27 06:08:16 power_api.c:86:get_average_voltage: chain[2], voltage is: 17.530283
2020-04-27 06:08:16 power_api.c:97:get_average_voltage: aveage voltage is: 17.648662
2020-04-27 06:08:16 driver-btm-api.c:449:change_freq_one_chain: chain[0] freq: 41 set refdiv: 2, fbdiv: 163, postdiv1: 7, postdiv2: 7, usr divider: 1
2020-04-27 06:08:16 driver-btm-api.c:449:change_freq_one_chain: chain[0] freq: 48 set refdiv: 2, fbdiv: 163, postdiv1: 7, postdiv2: 6, usr divider: 1
2020-04-27 06:08:17 driver-btm-api.c:449:change_freq_one_chain: chain[0] freq: 58 set refdiv: 2, fbdiv: 163, postdiv1: 7, postdiv2: 5, usr divider: 1
2020-04-27 06:08:17 driver-btm-api.c:449:change_freq_one_chain: chain[0] freq: 72 set refdiv: 2, fbdiv: 163, postdiv1: 7, postdiv2: 4, usr divider: 1
2020-04-27 06:08:17 driver-btm-api.c:449:change_freq_one_chain: chain[0] freq: 97 set refdiv: 2, fbdiv: 163, postdiv1: 7, postdiv2: 3, usr divider: 1
2020-04-27 06:08:17 driver-btm-api.c:449:change_freq_one_chain: chain[0] freq: 145 set refdiv: 2, fbdiv: 163, postdiv1: 7, postdiv2: 2, usr divider: 1
2020-04-27 06:08:17 driver-btm-api.c:449:change_freq_one_chain: chain[0] freq: 291 set refdiv: 2, fbdiv: 163, postdiv1: 7, postdiv2: 1, usr divider: 1
2020-04-27 06:08:17 driver-btm-api.c:449:change_freq_one_chain: chain[0] freq: 339 set refdiv: 2, fbdiv: 163, postdiv1: 6, postdiv2: 1, usr divider: 1
2020-04-27 06:08:17 driver-btm-api.c:449:change_freq_one_chain: chain[0] freq: 407 set refdiv: 2, fbdiv: 163, postdiv1: 5, postdiv2: 1, usr divider: 1
2020-04-27 06:08:17 driver-btm-api.c:449:change_freq_one_chain: chain[0] freq: 509 set refdiv: 2, fbdiv: 163, postdiv1: 4, postdiv2: 1, usr divider: 1
2020-04-27 06:08:17 driver-btm-api.c:449:change_freq_one_chain: chain[0] freq: 679 set refdiv: 2, fbdiv: 163, postdiv1: 3, postdiv2: 1, usr divider: 1
2020-04-27 06:08:18 driver-btm-api.c:449:change_freq_one_chain: chain[1] freq: 44 set refdiv: 2, fbdiv: 173, postdiv1: 7, postdiv2: 7, usr divider: 1
2020-04-27 06:08:18 driver-btm-api.c:449:change_freq_one_chain: chain[1] freq: 51 set refdiv: 2, fbdiv: 173, postdiv1: 7, postdiv2: 6, usr divider: 1
2020-04-27 06:08:18 driver-btm-api.c:449:change_freq_one_chain: chain[1] freq: 61 set refdiv: 2, fbdiv: 173, postdiv1: 7, postdiv2: 5, usr divider: 1
2020-04-27 06:08:18 driver-btm-api.c:449:change_freq_one_chain: chain[1] freq: 77 set refdiv: 2, fbdiv: 173, postdiv1: 7, postdiv2: 4, usr divider: 1
2020-04-27 06:08:18 driver-btm-api.c:449:change_freq_one_chain: chain[1] freq: 102 set refdiv: 2, fbdiv: 173, postdiv1: 7, postdiv2: 3, usr divider: 1
2020-04-27 06:08:18 driver-btm-api.c:449:change_freq_one_chain: chain[1] freq: 154 set refdiv: 2, fbdiv: 173, postdiv1: 7, postdiv2: 2, usr divider: 1
2020-04-27 06:08:18 driver-btm-api.c:449:change_freq_one_chain: chain[1] freq: 308 set refdiv: 2, fbdiv: 173, postdiv1: 7, postdiv2: 1, usr divider: 1
2020-04-27 06:08:18 driver-btm-api.c:449:change_freq_one_chain: chain[1] freq: 360 set refdiv: 2, fbdiv: 173, postdiv1: 6, postdiv2: 1, usr divider: 1
2020-04-27 06:08:18 driver-btm-api.c:449:change_freq_one_chain: chain[1] freq: 432 set refdiv: 2, fbdiv: 173, postdiv1: 5, postdiv2: 1, usr divider: 1
2020-04-27 06:08:18 driver-btm-api.c:449:change_freq_one_chain: chain[1] freq: 540 set refdiv: 2, fbdiv: 173, postdiv1: 4, postdiv2: 1, usr divider: 1
2020-04-27 06:08:19 driver-btm-api.c:449:change_freq_one_chain: chain[1] freq: 720 set refdiv: 2, fbdiv: 173, postdiv1: 3, postdiv2: 1, usr divider: 1
2020-04-27 06:08:19 driver-btm-api.c:449:change_freq_one_chain: chain[2] freq: 44 set refdiv: 2, fbdiv: 173, postdiv1: 7, postdiv2: 7, usr divider: 1
2020-04-27 06:08:19 driver-btm-api.c:449:change_freq_one_chain: chain[2] freq: 51 set refdiv: 2, fbdiv: 173, postdiv1: 7, postdiv2: 6, usr divider: 1
2020-04-27 06:08:19 driver-btm-api.c:449:change_freq_one_chain: chain[2] freq: 61 set refdiv: 2, fbdiv: 173, postdiv1: 7, postdiv2: 5, usr divider: 1
2020-04-27 06:08:19 driver-btm-api.c:449:change_freq_one_chain: chain[2] freq: 77 set refdiv: 2, fbdiv: 173, postdiv1: 7, postdiv2: 4, usr divider: 1
2020-04-27 06:08:19 driver-btm-api.c:449:change_freq_one_chain: chain[2] freq: 102 set refdiv: 2, fbdiv: 173, postdiv1: 7, postdiv2: 3, usr divider: 1
2020-04-27 06:08:19 driver-btm-api.c:449:change_freq_one_chain: chain[2] freq: 154 set refdiv: 2, fbdiv: 173, postdiv1: 7, postdiv2: 2, usr divider: 1
2020-04-27 06:08:19 driver-btm-api.c:449:change_freq_one_chain: chain[2] freq: 308 set refdiv: 2, fbdiv: 173, postdiv1: 7, postdiv2: 1, usr divider: 1
2020-04-27 06:08:19 driver-btm-api.c:449:change_freq_one_chain: chain[2] freq: 360 set refdiv: 2, fbdiv: 173, postdiv1: 6, postdiv2: 1, usr divider: 1
2020-04-27 06:08:20 driver-btm-api.c:449:change_freq_one_chain: chain[2] freq: 432 set refdiv: 2, fbdiv: 173, postdiv1: 5, postdiv2: 1, usr divider: 1
2020-04-27 06:08:20 driver-btm-api.c:449:change_freq_one_chain: chain[2] freq: 540 set refdiv: 2, fbdiv: 173, postdiv1: 4, postdiv2: 1, usr divider: 1
2020-04-27 06:08:20 driver-btm-api.c:449:change_freq_one_chain: chain[2] freq: 720 set refdiv: 2, fbdiv: 173, postdiv1: 3, postdiv2: 1, usr divider: 1
2020-04-27 06:08:20 driver-btm-api.c:612:set_timeout: freq 720 final timeout=163
2020-04-27 06:08:20 power_api.c:146:set_higher_voltage: higher_voltage = 17.900000
2020-04-27 06:08:20 power_api.c:428:slowly_set_iic_power_to_higher_voltage: slowly setting to voltage: 17.90 ...
2020-04-27 06:08:21 temperature.c:697:get_temp_info: read temp sensor failed: chain = 1, sensor = 2, chip = 168, reg = 0
2020-04-27 06:08:34 temperature.c:697:get_temp_info: read temp sensor failed: chain = 1, sensor = 2, chip = 168, reg = 1
2020-04-27 06:08:41 temperature.c:697:get_temp_info: read temp sensor failed: chain = 1, sensor = 3, chip = 184, reg = 0
2020-04-27 06:08:45 power_api.c:124:check_voltage_multi: retry time: 0
2020-04-27 06:08:48 power_api.c:86:get_average_voltage: chain[0], voltage is: 17.818066
2020-04-27 06:08:52 power_api.c:86:get_average_voltage: chain[1], voltage is: 17.879297
2020-04-27 06:08:54 temperature.c:697:get_temp_info: read temp sensor failed: chain = 1, sensor = 3, chip = 184, reg = 1
2020-04-27 06:08:55 power_api.c:86:get_average_voltage: chain[2], voltage is: 17.622129
2020-04-27 06:08:55 power_api.c:97:get_average_voltage: aveage voltage is: 17.773164
2020-04-27 06:08:55 frequency.c:540:get_current_min_freq: current min freq 680
2020-04-27 06:08:55 driver-btm-api.c:1660:check_clock_counter: freq 680 clock_counter_limit 86
2020-04-27 06:08:58 register.c:1416:quick_dump_core_hash_clock_counter: bad clock counter. chain = 1, asic = 5, core = 0, found 0, clock counter 0x00000000
2020-04-27 06:08:58 driver-btm-api.c:2097:bitmain_soc_init: clock count check failed after retry, wait for hash rate protect later.
2020-04-27 06:08:58 thread.c:799:create_check_system_status_thread: create thread
2020-04-27 06:08:58 driver-btm-api.c:2113:bitmain_soc_init: Init done!
2020-04-27 06:08:58 driver-btm-api.c:201:set_miner_status: STATUS_INIT
2020-04-27 06:09:03 driver-btm-api.c:201:set_miner_status: STATUS_OKAY
2020-04-27 06:09:05 temperature.c:697:get_temp_info: read temp sensor failed: chain = 1, sensor = 0, chip = 64, reg = 0
2020-04-27 06:09:08 driver-btm-api.c:1293:dhash_chip_send_job: Version num 4
2020-04-27 06:09:16 temperature.c:697:get_temp_info: read temp sensor failed: chain = 1, sensor = 0, chip = 64, reg = 1
2020-04-27 06:09:34 temperature.c:697:get_temp_info: read temp sensor failed: chain = 1, sensor = 1, chip = 48, reg = 1
2020-04-27 06:09:40 temperature.c:697:get_temp_info: read temp sensor failed: chain = 1, sensor = 2, chip = 168, reg = 0
2020-04-27 06:09:54 temperature.c:697:get_temp_info: read temp sensor failed: chain = 1, sensor = 2, chip = 168, reg = 1
2020-04-27 06:10:00 temperature.c:697:get_temp_info: read temp sensor failed: chain = 1, sensor = 3, chip = 184, reg = 0
2020-04-27 06:10:07 thread.c:382:check_working_voltage: current PCB min temperature is 31
2020-04-27 06:10:07 thread.c:383:check_working_voltage: current voltage is 17.90V, recovery to 16.90V
2020-04-27 06:10:07 power_api.c:397:slowly_set_iic_power_to_working_voltage: slowly setting to voltage: 16.90 ...
2020-04-27 06:10:12 register.c:160:read_asic_reg_with_addr: read asic reg error: expect chain = 1, chip = 64, reg = 28, got chain = 1, chip = 51, reg = 167
2020-04-27 06:10:14 temperature.c:697:get_temp_info: read temp sensor failed: chain = 1, sensor = 0, chip = 64, reg = 0
2020-04-27 06:10:21 temperature.c:697:get_temp_info: read temp sensor failed: chain = 1, sensor = 1, chip = 48, reg = 0
2020-04-27 06:10:32 temperature.c:697:get_temp_info: read temp sensor failed: chain = 1, sensor = 1, chip = 48, reg = 1
2020-04-27 06:10:38 temperature.c:697:get_temp_info: read temp sensor failed: chain = 1, sensor = 2, chip = 168, reg = 0
2020-04-27 06:10:43 power_api.c:124:check_voltage_multi: retry time: 0
2020-04-27 06:10:45 power_api.c:86:get_average_voltage: chain[0], voltage is: 16.807763
2020-04-27 06:10:46 power_api.c:86:get_average_voltage: chain[1], voltage is: 16.868994
2020-04-27 06:10:48 power_api.c:86:get_average_voltage: chain[2], voltage is: 16.636318
2020-04-27 06:10:48 power_api.c:97:get_average_voltage: aveage voltage is: 16.771025
2020-04-27 06:10:51 temperature.c:697:get_temp_info: read temp sensor failed: chain = 1, sensor = 2, chip = 168, reg = 1
2020-04-27 06:10:57 temperature.c:697:get_temp_info: read temp sensor failed: chain = 1, sensor = 3, chip = 184, reg = 0
2020-04-27 06:11:09 temperature.c:697:get_temp_info: read temp sensor failed: chain = 1, sensor = 3, chip = 184, reg = 1
2020-04-27 06:11:17 temperature.c:697:get_temp_info: read temp sensor failed: chain = 1, sensor = 0, chip = 64, reg = 0
2020-04-27 06:11:30 temperature.c:697:get_temp_info: read temp sensor failed: chain = 1, sensor = 0, chip = 64, reg = 1
2020-04-27 06:11:37 temperature.c:697:get_temp_info: read temp sensor failed: chain = 1, sensor = 1, chip = 48, reg = 0
2020-04-27 06:11:50 temperature.c:697:get_temp_info: read temp sensor failed: chain = 1, sensor = 1, chip = 48, reg = 1
2020-04-27 06:11:57 temperature.c:697:get_temp_info: read temp sensor failed: chain = 1, sensor = 2, chip = 168, reg = 0
2020-04-27 06:12:10 temperature.c:697:get_temp_info: read temp sensor failed: chain = 1, sensor = 2, chip = 168, reg = 1
2020-04-27 06:12:16 temperature.c:697:get_temp_info: read temp sensor failed: chain = 1, sensor = 3, chip = 184, reg = 0
2020-04-27 06:12:29 temperature.c:697:get_temp_info: read temp sensor failed: chain = 1, sensor = 3, chip = 184, reg = 1
2020-04-27 06:12:38 temperature.c:697:get_temp_info: read temp sensor failed: chain = 1, sensor = 0, chip = 64, reg = 0
2020-04-27 06:12:51 temperature.c:697:get_temp_info: read temp sensor failed: chain = 1, sensor = 0, chip = 64, reg = 1
2020-04-27 06:12:57 temperature.c:697:get_temp_info: read temp sensor failed: chain = 1, sensor = 1, chip = 48, reg = 0
2020-04-27 06:13:10 temperature.c:697:get_temp_info: read temp sensor failed: chain = 1, sensor = 1, chip = 48, reg = 1
2020-04-27 06:13:17 temperature.c:697:get_temp_info: read temp sensor failed: chain = 1, sensor = 2, chip = 168, reg = 0
2020-04-27 06:13:30 temperature.c:697:get_temp_info: read temp sensor failed: chain = 1, sensor = 2, chip = 168, reg = 1
2020-04-27 06:13:36 temperature.c:697:get_temp_info: read temp sensor failed: chain = 1, sensor = 3, chip = 184, reg = 0
2020-04-27 06:13:49 temperature.c:697:get_temp_info: read temp sensor failed: chain = 1, sensor = 3, chip = 184, reg = 1
2020-04-27 06:14:08 temperature.c:697:get_temp_info: read temp sensor failed: chain = 1, sensor = 1, chip = 48, reg = 0
2020-04-27 06:14:21 temperature.c:697:get_temp_info: read temp sensor failed: chain = 1, sensor = 1, chip = 48, reg = 1
2020-04-27 06:14:28 temperature.c:697:get_temp_info: read temp sensor failed: chain = 1, sensor = 2, chip = 168, reg = 0
2020-04-27 06:14:33 register.c:160:read_asic_reg_with_addr: read asic reg error: expect chain = 1, chip = 168, reg = 28, got chain = 1, chip = 134, reg = 206
2020-04-27 06:14:41 temperature.c:697:get_temp_info: read temp sensor failed: chain = 1, sensor = 2, chip = 168, reg = 1
2020-04-27 06:14:47 temperature.c:697:get_temp_info: read temp sensor failed: chain = 1, sensor = 3, chip = 184, reg = 0
2020-04-27 06:15:00 temperature.c:697:get_temp_info: read temp sensor failed: chain = 1, sensor = 3, chip = 184, reg = 1
2020-04-27 06:15:09 temperature.c:697:get_temp_info: read temp sensor failed: chain = 1, sensor = 0, chip = 64, reg = 0
2020-04-27 06:15:22 temperature.c:697:get_temp_info: read temp sensor failed: chain = 1, sensor = 0, chip = 64, reg = 1
2020-04-27 06:15:29 register.c:160:read_asic_reg_with_addr: read asic reg error: expect chain = 1, chip = 48, reg = 28, got chain = 1, chip = 49, reg = 19
2020-04-27 06:15:29 temperature.c:697:get_temp_info: read temp sensor failed: chain = 1, sensor = 1, chip = 48, reg = 0
2020-04-27 06:15:41 temperature.c:697:get_temp_info: read temp sensor failed: chain = 1, sensor = 1, chip = 48, reg = 1
2020-04-27 06:15:47 thread.c:422:is_zero_nonce_happened: chain_nonce[0] = 20209
2020-04-27 06:15:47 thread.c:422:is_zero_nonce_happened: chain_nonce[1] = 1412
2020-04-27 06:15:47 thread.c:422:is_zero_nonce_happened: chain_nonce[2] = 21194
2020-04-27 06:15:47 thread.c:539:check_system_work_thread: 0 nonce rate happened after retry, wait for hash rate protect later.
2020-04-27 06:15:48 temperature.c:697:get_temp_info: read temp sensor failed: chain = 1, sensor = 2, chip = 168, reg = 0
2020-04-27 06:16:01 temperature.c:697:get_temp_info: read temp sensor failed: chain = 1, sensor = 2, chip = 168, reg = 1
2020-04-27 06:16:07 temperature.c:697:get_temp_info: read temp sensor failed: chain = 1, sensor = 3, chip = 184, reg = 0
2020-04-27 06:16:20 temperature.c:697:get_temp_info: read temp sensor failed: chain = 1, sensor = 3, chip = 184, reg = 1
2020-04-27 06:16:29 temperature.c:697:get_temp_info: read temp sensor failed: chain = 1, sensor = 0, chip = 64, reg = 0
2020-04-27 06:16:42 temperature.c:697:get_temp_info: read temp sensor failed: chain = 1, sensor = 0, chip = 64, reg = 1
2020-04-27 06:16:49 temperature.c:697:get_temp_info: read temp sensor failed: chain = 1, sensor = 1, chip = 48, reg = 0
2020-04-27 06:17:02 temperature.c:697:get_temp_info: read temp sensor failed: chain = 1, sensor = 1, chip = 48, reg = 1
2020-04-27 06:17:20 temperature.c:697:get_temp_info: read temp sensor failed: chain = 1, sensor = 2, chip = 168, reg = 1
2020-04-27 06:17:26 temperature.c:697:get_temp_info: read temp sensor failed: chain = 1, sensor = 3, chip = 184, reg = 0
2020-04-27 06:17:39 temperature.c:697:get_temp_info: read temp sensor failed: chain = 1, sensor = 0, chip = 64, reg = 0
2020-04-27 06:17:52 temperature.c:697:get_temp_info: read temp sensor failed: chain = 1, sensor = 0, chip = 64, reg = 1
2020-04-27 06:17:58 temperature.c:697:get_temp_info: read temp sensor failed: chain = 1, sensor = 1, chip = 48, reg = 0
2020-04-27 06:18:11 temperature.c:697:get_temp_info: read temp sensor failed: chain = 1, sensor = 1, chip = 48, reg = 1
2020-04-27 06:18:18 temperature.c:697:get_temp_info: read temp sensor failed: chain = 1, sensor = 2, chip = 168, reg = 0
2020-04-27 06:18:25 register.c:160:read_asic_reg_with_addr: read asic reg error: expect chain = 1, chip = 184, reg = 28, got chain = 1, chip = 82, reg = 100
2020-04-27 06:18:28 temperature.c:697:get_temp_info: read temp sensor failed: chain = 1, sensor = 3, chip = 184, reg = 0
2020-04-27 06:18:39 temperature.c:697:get_temp_info: read temp sensor failed: chain = 1, sensor = 3, chip = 184, reg = 1
2020-04-27 06:18:48 register.c:160:read_asic_reg_with_addr: read asic reg error: expect chain = 1, chip = 64, reg = 28, got chain = 1, chip = 131, reg = 224
2020-04-27 06:18:48 temperature.c:697:get_temp_info: read temp sensor failed: chain = 1, sensor = 0, chip = 64, reg = 0
2020-04-27 06:19:00 temperature.c:697:get_temp_info: read temp sensor failed: chain = 1, sensor = 1, chip = 48, reg = 0
2020-04-27 06:19:13 temperature.c:697:get_temp_info: read temp sensor failed: chain = 1, sensor = 1, chip = 48, reg = 1
2020-04-27 06:19:19 temperature.c:697:get_temp_info: read temp sensor failed: chain = 1, sensor = 2, chip = 168, reg = 0
2020-04-27 06:19:32 temperature.c:697:get_temp_info: read temp sensor failed: chain = 1, sensor = 2, chip = 168, reg = 1
2020-04-27 06:19:37 register.c:160:read_asic_reg_with_addr: read asic reg error: expect chain = 1, chip = 184, reg = 28, got chain = 1, chip = 7, reg = 81
2020-04-27 06:19:39 temperature.c:697:get_temp_info: read temp sensor failed: chain = 1, sensor = 3, chip = 184, reg = 0
2020-04-27 06:19:49 temperature.c:697:get_temp_info: read temp sensor failed: chain = 1, sensor = 3, chip = 184, reg = 1
2020-04-27 06:19:58 temperature.c:697:get_temp_info: read temp sensor failed: chain = 1, sensor = 0, chip = 64, reg = 0
2020-04-27 06:20:11 temperature.c:697:get_temp_info: read temp sensor failed: chain = 1, sensor = 0, chip = 64, reg = 1
2020-04-27 06:20:18 temperature.c:697:get_temp_info: read temp sensor failed: chain = 1, sensor = 1, chip = 48, reg = 0
2020-04-27 06:20:31 temperature.c:697:get_temp_info: read temp sensor failed: chain = 1, sensor = 1, chip = 48, reg = 1
2020-04-27 06:20:37 temperature.c:697:get_temp_info: read temp sensor failed: chain = 1, sensor = 2, chip = 168, reg = 0
2020-04-27 06:20:50 temperature.c:697:get_temp_info: read temp sensor failed: chain = 1, sensor = 2, chip = 168, reg = 1
2020-04-27 06:20:57 temperature.c:697:get_temp_info: read temp sensor failed: chain = 1, sensor = 3, chip = 184, reg = 0
2020-04-27 06:21:10 temperature.c:697:get_temp_info: read temp sensor failed: chain = 1, sensor = 3, chip = 184, reg = 1
2020-04-27 06:21:19 temperature.c:697:get_temp_info: read temp sensor failed: chain = 1, sensor = 0, chip = 64, reg = 0
2020-04-27 06:21:32 temperature.c:697:get_temp_info: read temp sensor failed: chain = 1, sensor = 0, chip = 64, reg = 1
2020-04-27 06:21:38 temperature.c:697:get_temp_info: read temp sensor failed: chain = 1, sensor = 1, chip = 48, reg = 0
2020-04-27 06:21:48 temperature.c:697:get_temp_info: read temp sensor failed: chain = 1, sensor = 1, chip = 48, reg = 1
2020-04-27 06:21:55 temperature.c:697:get_temp_info: read temp sensor failed: chain = 1, sensor = 2, chip = 168, reg = 0
2020-04-27 06:22:08 temperature.c:697:get_temp_info: read temp sensor failed: chain = 1, sensor = 2, chip = 168, reg = 1
2020-04-27 06:22:15 temperature.c:697:get_temp_info: read temp sensor failed: chain = 1, sensor = 3, chip = 184, reg = 0
2020-04-27 06:22:26 temperature.c:697:get_temp_info: read temp sensor failed: chain = 1, sensor = 3, chip = 184, reg = 1
2020-04-27 06:22:35 temperature.c:697:get_temp_info: read temp sensor failed: chain = 1, sensor = 0, chip = 64, reg = 0
2020-04-27 06:22:48 temperature.c:697:get_temp_info: read temp sensor failed: chain = 1, sensor = 0, chip = 64, reg = 1
2020-04-27 06:22:54 temperature.c:697:get_temp_info: read temp sensor failed: chain = 1, sensor = 1, chip = 48, reg = 0
2020-04-27 06:23:07 temperature.c:697:get_temp_info: read temp sensor failed: chain = 1, sensor = 1, chip = 48, reg = 1
2020-04-27 06:23:11 register.c:160:read_asic_reg_with_addr: read asic reg error: expect chain = 1, chip = 168, reg = 28, got chain = 1, chip = 109, reg = 76
2020-04-27 06:23:14 temperature.c:697:get_temp_info: read temp sensor failed: chain = 1, sensor = 2, chip = 168, reg = 0
2020-04-27 06:23:27 temperature.c:697:get_temp_info: read temp sensor failed: chain = 1, sensor = 2, chip = 168, reg = 1
2020-04-27 06:23:33 temperature.c:697:get_temp_info: read temp sensor failed: chain = 1, sensor = 3, chip = 184, reg = 0
2020-04-27 06:23:43 temperature.c:697:get_temp_info: read temp sensor failed: chain = 1, sensor = 3, chip = 184, reg = 1
2020-04-27 06:24:02 temperature.c:697:get_temp_info: read temp sensor failed: chain = 1, sensor = 0, chip = 64, reg = 1
2020-04-27 06:24:06 temperature.c:697:get_temp_info: read temp sensor failed: chain = 1, sensor = 1, chip = 48, reg = 0
2020-04-27 06:24:19 temperature.c:697:get_temp_info: read temp sensor failed: chain = 1, sensor = 1, chip = 48, reg = 1
2020-04-27 06:24:25 temperature.c:697:get_temp_info: read temp sensor failed: chain = 1, sensor = 2, chip = 168, reg = 0
2020-04-27 06:24:38 temperature.c:697:get_temp_info: read temp sensor failed: chain = 1, sensor = 2, chip = 168, reg = 1
2020-04-27 06:24:45 temperature.c:697:get_temp_info: read temp sensor failed: chain = 1, sensor = 3, chip = 184, reg = 0
2020-04-27 06:24:55 temperature.c:697:get_temp_info: read temp sensor failed: chain = 1, sensor = 3, chip = 184, reg = 1
2020-04-27 06:25:04 temperature.c:697:get_temp_info: read temp sensor failed: chain = 1, sensor = 0, chip = 64, reg = 0
2020-04-27 06:25:15 temperature.c:697:get_temp_info: read temp sensor failed: chain = 1, sensor = 0, chip = 64, reg = 1
2020-04-27 06:25:21 temperature.c:697:get_temp_info: read temp sensor failed: chain = 1, sensor = 1, chip = 48, reg = 0
2020-04-27 06:25:35 temperature.c:697:get_temp_info: read temp sensor failed: chain = 1, sensor = 1, chip = 48, reg = 1
2020-04-27 06:26:01 temperature.c:697:get_temp_info: read temp sensor failed: chain = 1, sensor = 3, chip = 184, reg = 1
2020-04-27 06:26:10 temperature.c:697:get_temp_info: read temp sensor failed: chain = 1, sensor = 0, chip = 64, reg = 0
2020-04-27 06:26:23 temperature.c:697:get_temp_info: read temp sensor failed: chain = 1, sensor = 0, chip = 64, reg = 1
2020-04-27 06:26:29 temperature.c:697:get_temp_info: read temp sensor failed: chain = 1, sensor = 1, chip = 48, reg = 0
2020-04-27 06:26:43 temperature.c:697:get_temp_info: read temp sensor failed: chain = 1, sensor = 1, chip = 48, reg = 1
2020-04-27 06:26:49 temperature.c:697:get_temp_info: read temp sensor failed: chain = 1, sensor = 2, chip = 168, reg = 0
2020-04-27 06:27:02 temperature.c:697:get_temp_info: read temp sensor failed: chain = 1, sensor = 2, chip = 168, reg = 1
2020-04-27 06:27:09 temperature.c:697:get_temp_info: read temp sensor failed: chain = 1, sensor = 3, chip = 184, reg = 0
2020-04-27 06:27:22 temperature.c:697:get_temp_info: read temp sensor failed: chain = 1, sensor = 3, chip = 184, reg = 1
2020-04-27 06:27:30 temperature.c:697:get_temp_info: read temp sensor failed: chain = 1, sensor = 0, chip = 64, reg = 0
2020-04-27 06:27:41 temperature.c:697:get_temp_info: read temp sensor failed: chain = 1, sensor = 1, chip = 48, reg = 0
2020-04-27 06:27:52 temperature.c:697:get_temp_info: read temp sensor failed: chain = 1, sensor = 1, chip = 48, reg = 1
2020-04-27 06:27:58 temperature.c:697:get_temp_info: read temp sensor failed: chain = 1, sensor = 2, chip = 168, reg = 0
2020-04-27 06:28:11 temperature.c:697:get_temp_info: read temp sensor failed: chain = 1, sensor = 2, chip = 168, reg = 1
2020-04-27 06:28:26 temperature.c:697:get_temp_info: read temp sensor failed: chain = 1, sensor = 3, chip = 184, reg = 1
2020-04-27 06:28:35 temperature.c:697:get_temp_info: read temp sensor failed: chain = 1, sensor = 0, chip = 64, reg = 0
2020-04-27 06:28:48 temperature.c:697:get_temp_info: read temp sensor failed: chain = 1, sensor = 0, chip = 64, reg = 1
2020-04-27 06:28:54 temperature.c:697:get_temp_info: read temp sensor failed: chain = 1, sensor = 1, chip = 48, reg = 0
2020-04-27 06:29:05 temperature.c:697:get_temp_info: read temp sensor failed: chain = 1, sensor = 1, chip = 48, reg = 1
2020-04-27 06:29:12 temperature.c:697:get_temp_info: read temp sensor failed: chain = 1, sensor = 2, chip = 168, reg = 0
2020-04-27 06:29:25 temperature.c:697:get_temp_info: read temp sensor failed: chain = 1, sensor = 2, chip = 168, reg = 1
2020-04-27 06:29:32 temperature.c:697:get_temp_info: read temp sensor failed: chain = 1, sensor = 3, chip = 184, reg = 0
2020-04-27 06:29:43 temperature.c:697:get_temp_info: read temp sensor failed: chain = 1, sensor = 3, chip = 184, reg = 1
2020-04-27 06:29:52 temperature.c:697:get_temp_info: read temp sensor failed: chain = 1, sensor = 0, chip = 64, reg = 0
2020-04-27 06:30:05 temperature.c:697:get_temp_info: read temp sensor failed: chain = 1, sensor = 0, chip = 64, reg = 1
2020-04-27 06:30:12 temperature.c:697:get_temp_info: read temp sensor failed: chain = 1, sensor = 1, chip = 48, reg = 0
2020-04-27 06:30:25 temperature.c:697:get_temp_info: read temp sensor failed: chain = 1, sensor = 1, chip = 48, reg = 1
2020-04-27 06:30:31 temperature.c:697:get_temp_info: read temp sensor failed: chain = 1, sensor = 2, chip = 168, reg = 0
2020-04-27 06:30:45 temperature.c:697:get_temp_info: read temp sensor failed: chain = 1, sensor = 2, chip = 168, reg = 1
2020-04-27 06:30:51 temperature.c:697:get_temp_info: read temp sensor failed: chain = 1, sensor = 3, chip = 184, reg = 0
2020-04-27 06:31:04 temperature.c:697:get_temp_info: read temp sensor failed: chain = 1, sensor = 3, chip = 184, reg = 1
2020-04-27 06:31:19 temperature.c:697:get_temp_info: read temp sensor failed: chain = 1, sensor = 1, chip = 48, reg = 0
2020-04-27 06:31:29 temperature.c:697:get_temp_info: read temp sensor failed: chain = 1, sensor = 1, chip = 48, reg = 1
2020-04-27 06:31:35 temperature.c:697:get_temp_info: read temp sensor failed: chain = 1, sensor = 2, chip = 168, reg = 0
2020-04-27 06:31:49 temperature.c:697:get_temp_info: read temp sensor failed: chain = 1, sensor = 2, chip = 168, reg = 1
2020-04-27 06:31:55 temperature.c:697:get_temp_info: read temp sensor failed: chain = 1, sensor = 3, chip = 184, reg = 0
2020-04-27 06:32:08 temperature.c:697:get_temp_info: read temp sensor failed: chain = 1, sensor = 3, chip = 184, reg = 1
2020-04-27 06:32:17 temperature.c:697:get_temp_info: read temp sensor failed: chain = 1, sensor = 0, chip = 64, reg = 0
2020-04-27 06:32:30 temperature.c:697:get_temp_info: read temp sensor failed: chain = 1, sensor = 0, chip = 64, reg = 1
2020-04-27 06:32:37 temperature.c:697:get_temp_info: read temp sensor failed: chain = 1, sensor = 1, chip = 48, reg = 0
2020-04-27 06:32:50 temperature.c:697:get_temp_info: read temp sensor failed: chain = 1, sensor = 1, chip = 48, reg = 1
2020-04-27 06:32:56 temperature.c:697:get_temp_info: read temp sensor failed: chain = 1, sensor = 2, chip = 168, reg = 0

I tried SD recovery and latest firmware, same results no luck :(, can you please send me the image of the sensor on the hash board ( where to find it on hash board) and the part number so i can replace it, ( I can't send back to you, it will cost a lot more than miner is worth).

Thank you, my email > cryptoaddicted2019@gmail.com
0

Comment actions Permalink
Luke HAO-Technical Specialist

April 27, 2020 09:08
Hello Sanquiz

The four temperature sensor positions for T17 are located next to chip No.7, chip No.9, chip No.24, chip No.22,if you find these four temperature sensors with the same shape, you can see its specific model on the upper surface. thank you.
0

Comment actions Permalink
Mikeywithyou

April 27, 2020 23:30
Luke, do you have a diagram for the board to show chip numbers? thank you.
0

Comment actions Permalink
Luke HAO-Technical Specialist

April 28, 2020 02:29
Hello,Mikeywithyou

For which model?T17?
0

Comment actions Permalink
Mikeywithyou

April 28, 2020 02:45
Luke, yes please for T17 also S17+ if you have it, because I have the same sensor issue with both models.

Thank you
0

Comment actions Permalink
Luke HAO-Technical Specialist

April 28, 2020 03:40
Hello Mikey

S17+：

T17：
0

Comment actions Permalink
Mikeywithyou

April 28, 2020 05:18
Hey luke thank you so much, would you help me the positions of the sensors on the S17+ ?

I will be trying to replace them by myself, any tips that could be helpful?
0

Comment actions Permalink
Jackt

April 29, 2020 15:54

Edited
Hello, Mikeywithyou, did you find the temperature sensors?
I have the same problem with my t17.
I appreciate any advice

thanks
0

Comment actions Permalink
shayan.autotech

May 03, 2020 12:35
hey luke

I also had sensor problems all my temps on my status showed -127 and after a day my antminer t17 stopped hashing and it wont start could you help me and inform me were the problem is from.

Thank you
0

Comment actions Permalink
Jackt

May 03, 2020 18:03
Hello, I've already solved this problem.

The problem was at PSU, It was so dirty in the air intake where the fans are, that it couldn't get any fresh air in, It was completely covered with dirt. I guess the PSU components overheated and sent the wrong voltage to the hashboards

After cleaning the PSU my T17 works correctly again. :)

ZeusBTC and the user mikeywith from bitcointalk.org guided me to get and solve the problem.

You can see the ZeusBTC article from the following link: http://ar.zeusbtc.com/ShowNews.asp?ID=188

I hope can help you.
0

Comment actions Permalink
Sergey

August 28, 2021 19:29
Help !!!!

Booting Linux on physical CPU 0x0
Linux version 4.6.0-xilinx-gff8137b-dirty (lzq@armdev2) (gcc version 4.8.3 20140320 (prerelease) (Sourcery CodeBench Lite 2014.05-23) ) #25 SMP PREEMPT Fri Nov 23 15:30:52 CST 2018
CPU: ARMv7 Processor [413fc090] revision 0 (ARMv7), cr=18c5387d
CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
Machine model: Xilinx Zynq
cma: Reserved 16 MiB at 0x0e000000
Memory policy: Data cache writealloc
On node 0 totalpages: 61440
free_area_init_node: node 0, pgdat c0b39280, node_mem_map cde10000
Normal zone: 480 pages used for memmap
Normal zone: 0 pages reserved
Normal zone: 61440 pages, LIFO batch:15
percpu: Embedded 12 pages/cpu @cddf1000 s19776 r8192 d21184 u49152
pcpu-alloc: s19776 r8192 d21184 u49152 alloc=12*4096
pcpu-alloc: [0] 0 [0] 1
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 60960
Kernel command line: mem=240M console=ttyPS0,115200 ramdisk_size=33554432 root=/dev/ram rw earlyprintk
PID hash table entries: 1024 (order: 0, 4096 bytes)
Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
Memory: 195704K/245760K available (6345K kernel code, 231K rwdata, 1896K rodata, 1024K init, 223K bss, 33672K reserved, 16384K cma-reserved, 0K highmem)
Virtual kernel memory layout:
vector : 0xffff0000 - 0xffff1000 ( 4 kB)
fixmap : 0xffc00000 - 0xfff00000 (3072 kB)
vmalloc : 0xcf800000 - 0xff800000 ( 768 MB)
lowmem : 0xc0000000 - 0xcf000000 ( 240 MB)
pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
modules : 0xbf000000 - 0xbfe00000 ( 14 MB)
.text : 0xc0008000 - 0xc090c424 (9234 kB)
.init : 0xc0a00000 - 0xc0b00000 (1024 kB)
.data : 0xc0b00000 - 0xc0b39fe0 ( 232 kB)
.bss : 0xc0b39fe0 - 0xc0b71c28 ( 224 kB)
Preemptible hierarchical RCU implementation.
Build-time adjustment of leaf fanout to 32.
RCU restricting CPUs from NR_CPUS=4 to nr_cpu_ids=2.
RCU: Adjusting geometry for rcu_fanout_leaf=32, nr_cpu_ids=2
NR_IRQS:16 nr_irqs:16 16
efuse mapped to cf800000
ps7-slcr mapped to cf802000
L2C: platform modifies aux control register: 0x72360000 -> 0x72760000
L2C: DT/platform modifies aux control register: 0x72360000 -> 0x72760000
L2C-310 erratum 769419 enabled
L2C-310 enabling early BRESP for Cortex-A9
L2C-310 full line of zeros enabled for Cortex-A9
L2C-310 ID prefetch enabled, offset 1 lines
L2C-310 dynamic clock gating enabled, standby mode enabled
L2C-310 cache controller enabled, 8 ways, 512 kB
L2C-310: CACHE_ID 0x410000c8, AUX_CTRL 0x76760001
zynq_clock_init: clkc starts at cf802100
Zynq clock init
sched_clock: 64 bits at 333MHz, resolution 3ns, wraps every 4398046511103ns
clocksource: arm_global_timer: mask: 0xffffffffffffffff max_cycles: 0x4ce07af025, max_idle_ns: 440795209040 ns
Switching to timer-based delay loop, resolution 3ns
clocksource: ttc_clocksource: mask: 0xffff max_cycles: 0xffff, max_idle_ns: 537538477 ns
ps7-ttc #0 at cf80a000, irq=18
Console: colour dummy device 80x30
Calibrating delay loop (skipped), value calculated using timer frequency.. 666.66 BogoMIPS (lpj=3333333)
pid_max: default: 32768 minimum: 301
Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
CPU: Testing write buffer coherency: ok
CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
Setting up static identity map for 0x100000 - 0x100058
CPU1: failed to boot: -1
Brought up 1 CPUs
SMP: Total of 1 processors activated (666.66 BogoMIPS).
CPU: All CPU(s) started in SVC mode.
devtmpfs: initialized
VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 4
clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
pinctrl core: initialized pinctrl subsystem
NET: Registered protocol family 16
DMA: preallocated 256 KiB pool for atomic coherent allocations
cpuidle: using governor menu
hw-breakpoint: found 5 (+1 reserved) breakpoint and 1 watchpoint registers.
hw-breakpoint: maximum watchpoint size is 4 bytes.
zynq-ocm f800c000.ps7-ocmc: ZYNQ OCM pool: 256 KiB @ 0xcf880000
vgaarb: loaded
SCSI subsystem initialized
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
media: Linux media interface: v0.10
Linux video capture interface: v2.00
pps_core: LinuxPPS API ver. 1 registered
pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
PTP clock support registered
EDAC MC: Ver: 3.0.0
Advanced Linux Sound Architecture Driver Initialized.
clocksource: Switched to clocksource arm_global_timer
NET: Registered protocol family 2
TCP established hash table entries: 2048 (order: 1, 8192 bytes)
TCP bind hash table entries: 2048 (order: 2, 16384 bytes)
TCP: Hash tables configured (established 2048 bind 2048)
UDP hash table entries: 256 (order: 1, 8192 bytes)
UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
NET: Registered protocol family 1
RPC: Registered named UNIX socket transport module.
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
RPC: Registered tcp NFSv4.1 backchannel transport module.
PCI: CLS 0 bytes, default 64
Trying to unpack rootfs image as initramfs...
rootfs image is not initramfs (no cpio magic); looks like an initrd
Freeing initrd memory: 20632K (cc6db000 - cdb01000)
hw perfevents: enabled with armv7_cortex_a9 PMU driver, 7 counters available
futex hash table entries: 512 (order: 3, 32768 bytes)
workingset: timestamp_bits=28 max_order=16 bucket_order=0
jffs2: version 2.2. (NAND) (SUMMARY) © 2001-2006 Red Hat, Inc.
io scheduler noop registered
io scheduler deadline registered
io scheduler cfq registered (default)
dma-pl330 f8003000.ps7-dma: Loaded driver for PL330 DMAC-241330
dma-pl330 f8003000.ps7-dma: DBUFF-128x8bytes Num_Chans-8 Num_Peri-4 Num_Events-16
e0000000.serial: ttyPS0 at MMIO 0xe0000000 (irq = 158, base_baud = 6249999) is a xuartps
console [ttyPS0] enabled
xdevcfg f8007000.ps7-dev-cfg: ioremap 0xf8007000 to cf86e000
[drm] Initialized drm 1.1.0 20060810
brd: module loaded
loop: module loaded
CAN device driver interface
gpiod_set_value: invalid GPIO
libphy: MACB_mii_bus: probed
macb e000b000.ethernet eth0: Cadence GEM rev 0x00020118 at 0xe000b000 irq 31 (00:0a:35:00:00:00)
Generic PHY e000b000.etherne:00: attached PHY driver [Generic PHY] (mii_bus:phy_addr=e000b000.etherne:00, irq=-1)
e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k
e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci-pci: EHCI PCI platform driver
usbcore: registered new interface driver usb-storage
mousedev: PS/2 mouse device common for all mice
i2c /dev entries driver
Xilinx Zynq CpuIdle Driver started
sdhci: Secure Digital Host Controller Interface driver
sdhci: Copyright(c) Pierre Ossman
sdhci-pltfm: SDHCI platform and OF driver helper
mmc0: SDHCI controller on e0100000.ps7-sdio [e0100000.ps7-sdio] using ADMA
ledtrig-cpu: registered to indicate activity on CPUs
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
nand: device found, Manufacturer ID: 0x2c, Chip ID: 0xda
nand: Micron MT29F2G08ABAGAWP
nand: 256 MiB, SLC, erase size: 128 KiB, page size: 2048, OOB size: 128
nand: WARNING: pl35x-nand: the ECC used on your system is too weak compared to the one required by the NAND chip
Bad block table found at page 131008, version 0x01
Bad block table found at page 130944, version 0x01
6 ofpart partitions found on MTD device pl35x-nand
Creating 6 MTD partitions on "pl35x-nand":
0x000000000000-0x000002800000 : "BOOT.bin-env-dts-kernel"
0x000002800000-0x000004800000 : "ramfs"
0x000004800000-0x000005000000 : "configs"
0x000005000000-0x000006000000 : "reserve"
0x000006000000-0x000008000000 : "ramfs-bak"
0x000008000000-0x000010000000 : "reserve1"
NET: Registered protocol family 10
sit: IPv6 over IPv4 tunneling driver
NET: Registered protocol family 17
can: controller area network core (rev 20120528 abi 9)
NET: Registered protocol family 29
can: raw protocol (rev 20120528)
can: broadcast manager protocol (rev 20120528 t)
can: netlink gateway (rev 20130117) max_hops=1
zynq_pm_ioremap: no compatible node found for 'xlnx,zynq-ddrc-a05'
zynq_pm_late_init: Unable to map DDRC IO memory.
Registering SWP/SWPB emulation handler
hctosys: unable to open rtc device (rtc0)
ALSA device list:
No soundcards found.
RAMDISK: gzip image found at block 0
EXT4-fs (ram0): couldn't mount as ext3 due to feature incompatibilities
EXT4-fs (ram0): mounted filesystem without journal. Opts: (null)
VFS: Mounted root (ext4 filesystem) on device 1:0.
devtmpfs: mounted
Freeing unused kernel memory: 1024K (c0a00000 - c0b00000)
EXT4-fs (ram0): re-mounted. Opts: block_validity,delalloc,barrier,user_xattr
random: dd urandom read with 0 bits of entropy available
ubi0: attaching mtd2
ubi0: scanning is finished
ubi0: attached mtd2 (name "configs", size 8 MiB)
ubi0: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes
ubi0: min./max. I/O unit sizes: 2048/2048, sub-page size 2048
ubi0: VID header offset: 2048 (aligned 2048), data offset: 4096
ubi0: good PEBs: 64, bad PEBs: 0, corrupted PEBs: 0
ubi0: user volume: 1, internal volumes: 1, max. volumes count: 128
ubi0: max/mean erase counter: 634/421, WL threshold: 4096, image sequence number: 237714726
ubi0: available PEBs: 0, total reserved PEBs: 64, PEBs reserved for bad PEB handling: 40
ubi0: background thread "ubi_bgt0d" started, PID 708
UBIFS (ubi0:0): background thread "ubifs_bgt0_0" started, PID 711
UBIFS (ubi0:0): UBIFS: mounted UBI device 0, volume 0, name "configs"
UBIFS (ubi0:0): LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
UBIFS (ubi0:0): FS size: 1396736 bytes (1 MiB, 11 LEBs), journal size 888833 bytes (0 MiB, 5 LEBs)
UBIFS (ubi0:0): reserved for root: 65970 bytes (64 KiB)
UBIFS (ubi0:0): media format: w4/r0 (latest is w4/r0), UUID FF09433B-E002-4C29-97EC-6220DDC4BB36, small LPT model
ubi1: attaching mtd5
ubi1: scanning is finished
ubi1: attached mtd5 (name "reserve1", size 128 MiB)
ubi1: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes
ubi1: min./max. I/O unit sizes: 2048/2048, sub-page size 2048
ubi1: VID header offset: 2048 (aligned 2048), data offset: 4096
ubi1: good PEBs: 1020, bad PEBs: 4, corrupted PEBs: 0
ubi1: user volume: 1, internal volumes: 1, max. volumes count: 128
ubi1: max/mean erase counter: 4904/3082, WL threshold: 4096, image sequence number: 914180297
ubi1: available PEBs: 0, total reserved PEBs: 1020, PEBs reserved for bad PEB handling: 36
ubi1: background thread "ubi_bgt1d" started, PID 720
UBIFS (ubi1:0): background thread "ubifs_bgt1_0" started, PID 723
UBIFS (ubi1:0): UBIFS: mounted UBI device 1, volume 0, name "reserve1"
UBIFS (ubi1:0): LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
UBIFS (ubi1:0): FS size: 123039744 bytes (117 MiB, 969 LEBs), journal size 6221824 bytes (5 MiB, 49 LEBs)
UBIFS (ubi1:0): reserved for root: 4952683 bytes (4836 KiB)
UBIFS (ubi1:0): media format: w4/r0 (latest is w4/r0), UUID BCBDE5E0-4C0B-4978-9734-FC58D9F68227, small LPT model
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
macb e000b000.ethernet eth0: unable to generate target frequency: 25000000 Hz
macb e000b000.ethernet eth0: link up (100/Full)
IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
In axi fpga driver!
request_mem_region OK!
AXI fpga dev virtual address is 0xcfb54000
*base_vir_addr = 0xb023
In fpga mem driver!
request_mem_region OK!
fpga mem virtual address is 0xd2000000
random: nonblocking pool is initialized
2021-08-28 18:30:01:thread.c:1555:create_bitmain_soc_init_thread: create thread
2021-08-28 18:30:01:driver-btm-api.c:682:init_freq_mode: This is scan-user version
2021-08-28 18:30:01:driver-btm-api.c:2518:bitmain_soc_init: Miner compile time: Fri Jan 8 22:35:06 CST 2021 type: Antminer T17e
2021-08-28 18:30:01:driver-btm-api.c:2519:bitmain_soc_init: commit version: 37668c9 2021-01-08 18:20:11, build by: jenkins 2021-01-08 22:39:58
2021-08-28 18:30:01:driver-btm-api.c:2520:bitmain_soc_init: opt_multi_version = 1
2021-08-28 18:30:01:driver-btm-api.c:2521:bitmain_soc_init: opt_bitmain_ab = 1
2021-08-28 18:30:01:driver-btm-api.c:2522:bitmain_soc_init: mid_auto_gen = 0
2021-08-28 18:30:01:driver-btm-api.c:2523:bitmain_soc_init: work_mode = 0
2021-08-28 18:30:01:driver-btm-api.c:2524:bitmain_soc_init: power_feedback_en = true
2021-08-28 18:30:01:driver-btm-api.c:2067:show_sn: no SN got, please write SN to /config/sn
2021-08-28 18:30:01:driver-btm-api.c:1384:miner_device_init: Detect 256MB control board of XILINX
2021-08-28 18:30:01:driver-btm-api.c:1325:init_fan_parameter: fan_eft : 1 fan_pwm : 100
2021-08-28 18:30:07:driver-btm-api.c:1309:init_miner_version: miner ID : 806cd4442b10481c
2021-08-28 18:30:07:driver-btm-api.c:1315:init_miner_version: FPGA Version = 0xB023
2021-08-28 18:30:12:auto_adapt.c:100:_get_board_info: chain[0] board bin: 1, chip bin: 3, chip ft: A4V4, chip version: AB
2021-08-28 18:30:12:auto_adapt.c:100:_get_board_info: chain[1] board bin: 1, chip bin: 3, chip ft: A4V4, chip version: AB
2021-08-28 18:30:12:auto_adapt.c:100:_get_board_info: chain[2] board bin: 1, chip bin: 3, chip ft: A4V4, chip version: AB
2021-08-28 18:30:12:driver-btm-api.c:2164:get_calibration_voltage: calibration voltage flag is error data.
2021-08-28 18:30:12 voltage[0] = 1840
2021-08-28 18:30:12 voltage[1] = 1840
2021-08-28 18:30:12 voltage[2] = 1840
2021-08-28 18:30:12:auto_adapt.c:273:is_sweep_failed_before: open sweep tag failed
voltage_ref = 1840
2100 2100 2100 2100 2100 2100
2100 2100 2100 2100 2100 2100
2100 2100 2100 2100 2100 2100
2100 2100 2100 2100 2100 2060
2100 2100 2100 2100 2070 2020
2070 2060 2060 2050 2020 1970
2020 2010 2010 2000 1980 1920
1980 1970 1960 1950 1910 1860
1980 1970 1960 1950 1910 1860

2021-08-28 18:30:12:thread.c:1523:create_read_nonce_reg_thread: create thread
2021-08-28 18:30:12:driver-btm-api.c:698:dump_pcb_bom_version: Chain [0] PCB Version: 0x010a
2021-08-28 18:30:12:driver-btm-api.c:699:dump_pcb_bom_version: Chain [0] BOM Version: 0x0100
2021-08-28 18:30:12:driver-btm-api.c:698:dump_pcb_bom_version: Chain [1] PCB Version: 0x010a
2021-08-28 18:30:12:driver-btm-api.c:699:dump_pcb_bom_version: Chain [1] BOM Version: 0x0100
2021-08-28 18:30:12:driver-btm-api.c:698:dump_pcb_bom_version: Chain [2] PCB Version: 0x010a
2021-08-28 18:30:12:driver-btm-api.c:699:dump_pcb_bom_version: Chain [2] BOM Version: 0x0100
2021-08-28 18:30:19:driver-btm-api.c:2344:bitmain_board_init: Fan check passed.
2021-08-28 18:30:20:board.c:81:jump_and_app_check_restore_pic: chain[0] PIC jump to app
2021-08-28 18:30:22:board.c:94:jump_and_app_check_restore_pic: Check chain[0] PIC fw version=0x88
2021-08-28 18:30:23:board.c:81:jump_and_app_check_restore_pic: chain[1] PIC jump to app
2021-08-28 18:30:25:board.c:94:jump_and_app_check_restore_pic: Check chain[1] PIC fw version=0x88
2021-08-28 18:30:26:board.c:81:jump_and_app_check_restore_pic: chain[2] PIC jump to app
2021-08-28 18:30:28:board.c:94:jump_and_app_check_restore_pic: Check chain[2] PIC fw version=0x88
2021-08-28 18:30:28:thread.c:1518:create_pic_heart_beat_thread: create thread
2021-08-28 18:30:30:power_api.c:241:power_init: power type version: 0x0042
2021-08-28 18:30:31:power_api.c:259:power_init: Power init:
2021-08-28 18:30:31:power_api.c:260:power_init: current_voltage_raw = 1840
2021-08-28 18:30:31:power_api.c:261:power_init: highest_voltage_raw = 2000
2021-08-28 18:30:31:power_api.c:262:power_init: working_voltage_raw = 1800
2021-08-28 18:30:31:power_api.c:263:power_init: higher_voltage_raw = 1850
2021-08-28 18:30:31:power_api.c:264:power_init: check_asic_voltage_raw = 1800
2021-08-28 18:30:31:driver-btm-api.c:2354:bitmain_board_init: Enter 60s sleep to make sure power release finish.
2021-08-28 18:31:33:driver-btm-api.c:1123:check_asic_number_until_volt_balance: THIS is No.1 time boost asic:
2021-08-28 18:31:33:power_api.c:334:modify_check_asic_voltage: check_asic_voltage_raw = 1800
2021-08-28 18:31:36:power_api.c:298:set_to_check_asic_voltage_by_steps: Set to voltage raw 1800, step by step.
2021-08-28 18:31:46:uart.c:69:set_baud: set UART baud to 115200
chain 0, IO_DRIVE_STRENGTH_CONFIGURATION reg = 0x 7777777
2021-08-28 18:31:50:driver-btm-api.c:1035:check_asic_number_with_power_on: Chain[0]: find 78 asic, times 0
chain 1, IO_DRIVE_STRENGTH_CONFIGURATION reg = 0x 7777777
2021-08-28 18:31:54:driver-btm-api.c:1035:check_asic_number_with_power_on: Chain[1]: find 78 asic, times 0
chain 2, IO_DRIVE_STRENGTH_CONFIGURATION reg = 0x 7777777
2021-08-28 18:31:59:driver-btm-api.c:1035:check_asic_number_with_power_on: Chain[2]: find 78 asic, times 0
2021-08-28 18:31:59:driver-btm-api.c:1163:check_asic_number_until_volt_balance: PASS: volt balance at No.1 time boost asic.
2021-08-28 18:31:59:power_api.c:364:set_to_highest_voltage_by_steps: Set to voltage raw 2000, step by step.
2021-08-28 18:32:24:driver-hash-chip.c:876:set_uart_relay: set uart relay to 0x330003
2021-08-28 18:32:24:driver-hash-chip.c:1264:set_ldo_ctrl: Set LDO to 0x2000203
2021-08-28 18:32:25:driver-hash-chip.c:737:dump_adc_voltage_v2: get ADC_DATAOUT from chain 0 with 0 regs timeout.
chain 0 domain 0: d0 0.391, d1 0.400, d2 0.395, d3 0.395, sum = 1.580200
chain 0 domain 1: d0 0.387, d1 0.385, d2 0.362, d3 0.359, sum = 1.493408
chain 0 domain 2: d0 0.371, d1 0.376, d2 0.376, d3 0.365, sum = 1.487976
chain 0 domain 3: d0 0.378, d1 0.383, d2 0.376, d3 0.356, sum = 1.493225
chain 0 domain 4: d0 0.390, d1 0.385, d2 0.386, d3 0.387, sum = 1.546997
chain 0 domain 5: d0 0.392, d1 0.386, d2 0.386, d3 0.388, sum = 1.552490
chain 0 domain 6: d0 0.363, d1 0.358, d2 0.372, d3 0.371, sum = 1.462708
chain 0 domain 7: d0 0.393, d1 0.395, d2 0.385, d3 0.391, sum = 1.565063
chain 0 domain 8: d0 0.374, d1 0.378, d2 0.368, d3 0.363, sum = 1.483582
chain 0 domain 9: d0 0.412, d1 0.411, d2 0.414, d3 0.412, sum = 1.649597
chain 0 domain 10: d0 0.413, d1 0.414, d2 0.411, d3 0.413, sum = 1.651062
chain 0 domain 11: d0 0.388, d1 0.385, d2 0.376, d3 0.363, sum = 1.512146
chain 0 domain 12: d0 0.314, d1 0.318, d2 0.318, d3 0.312, sum = 1.262390
2021-08-28 18:32:25:driver-hash-chip.c:737:dump_adc_voltage_v2: get ADC_DATAOUT from chain 1 with 0 regs timeout.
chain 1 domain 0: d0 0.405, d1 0.412, d2 0.400, d3 0.406, sum = 1.622559
chain 1 domain 1: d0 0.392, d1 0.385, d2 0.400, d3 0.392, sum = 1.568481
chain 1 domain 2: d0 0.388, d1 0.389, d2 0.396, d3 0.391, sum = 1.564636
chain 1 domain 3: d0 0.381, d1 0.381, d2 0.389, d3 0.384, sum = 1.535278
chain 1 domain 4: d0 0.386, d1 0.391, d2 0.394, d3 0.390, sum = 1.561707
chain 1 domain 5: d0 0.393, d1 0.392, d2 0.380, d3 0.388, sum = 1.551819
chain 1 domain 6: d0 0.380, d1 0.379, d2 0.393, d3 0.381, sum = 1.532471
chain 1 domain 7: d0 0.380, d1 0.380, d2 0.389, d3 0.361, sum = 1.510254
chain 1 domain 8: d0 0.370, d1 0.377, d2 0.377, d3 0.365, sum = 1.489319
chain 1 domain 9: d0 0.366, d1 0.377, d2 0.371, d3 0.376, sum = 1.490967
chain 1 domain 10: d0 0.372, d1 0.377, d2 0.374, d3 0.366, sum = 1.488892
chain 1 domain 11: d0 0.360, d1 0.355, d2 0.362, d3 0.359, sum = 1.435974
chain 1 domain 12: d0 0.364, d1 0.356, d2 0.352, d3 0.342, sum = 1.413513
2021-08-28 18:32:26:driver-hash-chip.c:591:recalc_invalid_volt: chain 2 domain 08 column 01 single core_domain: no useful core domain volt: 0.00 0.00 0.00 0.00.
2021-08-28 18:32:26:driver-hash-chip.c:591:recalc_invalid_volt: chain 2 domain 08 column 02 single core_domain: no useful core domain volt: 0.00 0.00 0.00 0.00.
2021-08-28 18:32:26:driver-hash-chip.c:591:recalc_invalid_volt: chain 2 domain 08 column 03 single core_domain: no useful core domain volt: 0.00 0.00 0.00 0.00.
2021-08-28 18:32:26:driver-hash-chip.c:591:recalc_invalid_volt: chain 2 domain 08 column 04 single core_domain: no useful core domain volt: 0.00 0.00 0.00 0.00.
2021-08-28 18:32:26:driver-hash-chip.c:591:recalc_invalid_volt: chain 2 domain 08 column 05 single core_domain: no useful core domain volt: 0.00 0.00 0.00 0.00.
2021-08-28 18:32:26:driver-hash-chip.c:591:recalc_invalid_volt: chain 2 domain 09 column 00 single core_domain: no useful core domain volt: 0.00 0.00 0.00 0.00.
2021-08-28 18:32:26:driver-hash-chip.c:591:recalc_invalid_volt: chain 2 domain 09 column 01 single core_domain: no useful core domain volt: 0.00 0.00 0.00 0.00.
2021-08-28 18:32:26:driver-hash-chip.c:591:recalc_invalid_volt: chain 2 domain 09 column 02 single core_domain: no useful core domain volt: 0.00 0.00 0.00 0.00.
2021-08-28 18:32:26:driver-hash-chip.c:591:recalc_invalid_volt: chain 2 domain 09 column 03 single core_domain: no useful core domain volt: 0.00 0.00 0.00 0.00.
2021-08-28 18:32:26:driver-hash-chip.c:591:recalc_invalid_volt: chain 2 domain 09 column 04 single core_domain: no useful core domain volt: 0.00 0.00 0.00 0.00.
2021-08-28 18:32:26:driver-hash-chip.c:591:recalc_invalid_volt: chain 2 domain 09 column 05 single core_domain: no useful core domain volt: 0.00 0.00 0.00 0.00.
2021-08-28 18:32:26:driver-hash-chip.c:591:recalc_invalid_volt: chain 2 domain 10 column 00 single core_domain: no useful core domain volt: 0.00 0.00 0.00 0.00.
2021-08-28 18:32:26:driver-hash-chip.c:591:recalc_invalid_volt: chain 2 domain 10 column 01 single core_domain: no useful core domain volt: 0.00 0.00 0.00 0.00.
2021-08-28 18:32:26:driver-hash-chip.c:591:recalc_invalid_volt: chain 2 domain 10 column 02 single core_domain: no useful core domain volt: 0.00 0.00 0.00 0.00.
2021-08-28 18:32:26:driver-hash-chip.c:591:recalc_invalid_volt: chain 2 domain 10 column 03 single core_domain: no useful core domain volt: 0.00 0.00 0.00 0.00.
2021-08-28 18:32:26:driver-hash-chip.c:591:recalc_invalid_volt: chain 2 domain 10 column 04 single core_domain: no useful core domain volt: 0.00 0.00 0.00 0.00.
2021-08-28 18:32:26:driver-hash-chip.c:591:recalc_invalid_volt: chain 2 domain 10 column 05 single core_domain: no useful core domain volt: 0.00 0.00 0.00 0.00.
2021-08-28 18:32:26:driver-hash-chip.c:591:recalc_invalid_volt: chain 2 domain 11 column 00 single core_domain: no useful core domain volt: 0.00 0.00 0.00 0.00.
2021-08-28 18:32:26:driver-hash-chip.c:591:recalc_invalid_volt: chain 2 domain 11 column 01 single core_domain: no useful core domain volt: 0.00 0.00 0.00 0.00.
2021-08-28 18:32:26:driver-hash-chip.c:591:recalc_invalid_volt: chain 2 domain 11 column 02 single core_domain: no useful core domain volt: 0.00 0.00 0.00 0.00.
2021-08-28 18:32:26:driver-hash-chip.c:591:recalc_invalid_volt: chain 2 domain 11 column 03 single core_domain: no useful core domain volt: 0.00 0.00 0.00 0.00.
2021-08-28 18:32:26:driver-hash-chip.c:591:recalc_invalid_volt: chain 2 domain 11 column 04 single core_domain: no useful core domain volt: 0.00 0.00 0.00 0.00.
2021-08-28 18:32:26:driver-hash-chip.c:591:recalc_invalid_volt: chain 2 domain 11 column 05 single core_domain: no useful core domain volt: 0.00 0.00 0.00 0.00.
2021-08-28 18:32:26:driver-hash-chip.c:591:recalc_invalid_volt: chain 2 domain 12 column 00 single core_domain: no useful core domain volt: 0.00 0.00 0.00 0.00.
2021-08-28 18:32:26:driver-hash-chip.c:591:recalc_invalid_volt: chain 2 domain 12 column 01 single core_domain: no useful core domain volt: 0.00 0.00 0.00 0.00.
2021-08-28 18:32:26:driver-hash-chip.c:591:recalc_invalid_volt: chain 2 domain 12 column 02 single core_domain: no useful core domain volt: 0.00 0.00 0.00 0.00.
2021-08-28 18:32:26:driver-hash-chip.c:591:recalc_invalid_volt: chain 2 domain 12 column 03 single core_domain: no useful core domain volt: 0.00 0.00 0.00 0.00.
2021-08-28 18:32:26:driver-hash-chip.c:591:recalc_invalid_volt: chain 2 domain 12 column 04 single core_domain: no useful core domain volt: 0.00 0.00 0.00 0.00.
2021-08-28 18:32:26:driver-hash-chip.c:591:recalc_invalid_volt: chain 2 domain 12 column 05 single core_domain: no useful core domain volt: 0.00 0.00 0.00 0.00.
2021-08-28 18:32:26:driver-hash-chip.c:707:dump_adc_voltage_v2: chain 2 domain 09 core_domain 0: all asic timeout or overrange.
2021-08-28 18:32:26:driver-hash-chip.c:707:dump_adc_voltage_v2: chain 2 domain 09 core_domain 1: all asic timeout or overrange.
2021-08-28 18:32:26:driver-hash-chip.c:707:dump_adc_voltage_v2: chain 2 domain 09 core_domain 2: all asic timeout or overrange.
2021-08-28 18:32:26:driver-hash-chip.c:707:dump_adc_voltage_v2: chain 2 domain 09 core_domain 3: all asic timeout or overrange.
2021-08-28 18:32:26:driver-hash-chip.c:707:dump_adc_voltage_v2: chain 2 domain 10 core_domain 0: all asic timeout or overrange.
2021-08-28 18:32:26:driver-hash-chip.c:707:dump_adc_voltage_v2: chain 2 domain 10 core_domain 1: all asic timeout or overrange.
2021-08-28 18:32:26:driver-hash-chip.c:707:dump_adc_voltage_v2: chain 2 domain 10 core_domain 2: all asic timeout or overrange.
2021-08-28 18:32:26:driver-hash-chip.c:707:dump_adc_voltage_v2: chain 2 domain 10 core_domain 3: all asic timeout or overrange.
2021-08-28 18:32:26:driver-hash-chip.c:707:dump_adc_voltage_v2: chain 2 domain 11 core_domain 0: all asic timeout or overrange.
2021-08-28 18:32:26:driver-hash-chip.c:707:dump_adc_voltage_v2: chain 2 domain 11 core_domain 1: all asic timeout or overrange.
2021-08-28 18:32:26:driver-hash-chip.c:707:dump_adc_voltage_v2: chain 2 domain 11 core_domain 2: all asic timeout or overrange.
2021-08-28 18:32:26:driver-hash-chip.c:707:dump_adc_voltage_v2: chain 2 domain 11 core_domain 3: all asic timeout or overrange.
2021-08-28 18:32:26:driver-hash-chip.c:707:dump_adc_voltage_v2: chain 2 domain 12 core_domain 0: all asic timeout or overrange.
2021-08-28 18:32:26:driver-hash-chip.c:707:dump_adc_voltage_v2: chain 2 domain 12 core_domain 1: all asic timeout or overrange.
2021-08-28 18:32:26:driver-hash-chip.c:707:dump_adc_voltage_v2: chain 2 domain 12 core_domain 2: all asic timeout or overrange.
2021-08-28 18:32:26:driver-hash-chip.c:707:dump_adc_voltage_v2: chain 2 domain 12 core_domain 3: all asic timeout or overrange.
2021-08-28 18:32:26:driver-hash-chip.c:737:dump_adc_voltage_v2: get ADC_DATAOUT from chain 2 with 116 regs timeout.
chain 2 domain 0: d0 0.384, d1 0.388, d2 0.346, d3 0.377, sum = 1.495300
chain 2 domain 1: d0 0.389, d1 0.378, d2 0.383, d3 0.380, sum = 1.530273
chain 2 domain 2: d0 0.383, d1 0.379, d2 0.398, d3 0.382, sum = 1.541382
chain 2 domain 3: d0 0.384, d1 0.380, d2 0.367, d3 0.364, sum = 1.495117
chain 2 domain 4: d0 0.386, d1 0.384, d2 0.376, d3 0.361, sum = 1.505920
chain 2 domain 5: d0 0.378, d1 0.373, d2 0.390, d3 0.356, sum = 1.496094
chain 2 domain 6: d0 0.358, d1 0.355, d2 0.371, d3 0.367, sum = 1.451782
chain 2 domain 7: d0 0.377, d1 0.374, d2 0.369, d3 0.372, sum = 1.492310
chain 2 domain 8: d0 0.403, d1 0.394, d2 0.394, d3 0.397, sum = 1.587158
chain 2 domain 9: x d0 0.000, x d1 0.000, x d2 0.000, x d3 0.000, x sum = 0.000000
chain 2 domain 10: x d0 0.000, x d1 0.000, x d2 0.000, x d3 0.000, x sum = 0.000000
chain 2 domain 11: x d0 0.000, x d1 0.000, x d2 0.000, x d3 0.000, x sum = 0.000000
chain 2 domain 12: x d0 0.000, x d1 0.000, x d2 0.000, x d3 0.000, x sum = 0.000000
2021-08-28 18:32:26:driver-hash-chip.c:486:check_adc_voltage: FAIL domain volt check: chain 2 domain 09 volt 0.000 less then request 0.800 (index 0)
2021-08-28 18:32:26:driver-hash-chip.c:486:check_adc_voltage: FAIL domain volt check: chain 2 domain 10 volt 0.000 less then request 0.800 (index 0)
2021-08-28 18:32:26:driver-hash-chip.c:486:check_adc_voltage: FAIL domain volt check: chain 2 domain 11 volt 0.000 less then request 0.800 (index 0)
2021-08-28 18:32:26:driver-hash-chip.c:486:check_adc_voltage: FAIL domain volt check: chain 2 domain 12 volt 0.000 less then request 0.800 (index 0)
2021-08-28 18:32:26:driver-btm-api.c:2379:bitmain_board_init: FAULT: check_asic_number_until_volt_balance PASS but bitmain_board_config_init FAIL!!!
2021-08-28 18:32:28:temperature.c:272:calibrate_temp_sensor_one_chain: chain 0 temp sensor NCT218
2021-08-28 18:32:30:temperature.c:272:calibrate_temp_sensor_one_chain: chain 1 temp sensor NCT218
2021-08-28 18:32:35:driver-btm-api.c:311:check_bringup_temp: Bring up temperature is 24
2021-08-28 18:32:35:uart.c:69:set_baud: set UART baud to 3000000
2021-08-28 18:32:35 voltage[0] = 1840
2021-08-28 18:32:35 voltage[1] = 1840
2021-08-28 18:32:35:power_api.c:272:set_working_voltage_raw: working_voltage_raw = 1840
2021-08-28 18:32:35:thread.c:1538:create_check_miner_status_thread: create thread
2021-08-28 18:32:35:thread.c:1528:create_show_miner_status_thread: create thread
2021-08-28 18:32:35:thread.c:1503:create_temperature_monitor_thread: create thread
2021-08-28 18:32:35:thread.c:1580:create_fan_monitor_thread: create thread
2021-08-28 18:32:35:frequency.c:578:inc_freq_with_fixed_vco: chain = 255, freq = 560, is_higher_voltage = true
2021-08-28 18:32:41:frequency.c:623:inc_freq_with_fixed_vco: get pcb 25 ~ 28, chip_temp 30 ~ 34, now 6.0s, target 35.0
2021-08-28 18:32:42:frequency.c:623:inc_freq_with_fixed_vco: get pcb 26 ~ 28, chip_temp 31 ~ 34, now 7.0s, target 35.2
2021-08-28 18:32:43:frequency.c:623:inc_freq_with_fixed_vco: get pcb 26 ~ 28, chip_temp 32 ~ 35, now 8.0s, target 35.3
2021-08-28 18:32:44:frequency.c:623:inc_freq_with_fixed_vco: get pcb 24 ~ 29, chip_temp 32 ~ 34, now 9.0s, target 35.5
2021-08-28 18:32:45:frequency.c:623:inc_freq_with_fixed_vco: get pcb 26 ~ 28, chip_temp 31 ~ 35, now 10.0s, target 35.7
2021-08-28 18:32:46:frequency.c:623:inc_freq_with_fixed_vco: get pcb 26 ~ 29, chip_temp 32 ~ 35, now 11.0s, target 35.8
2021-08-28 18:32:47:frequency.c:623:inc_freq_with_fixed_vco: get pcb 25 ~ 28, chip_temp 31 ~ 34, now 12.0s, target 36.0
2021-08-28 18:32:47:frequency.c:657:inc_freq_with_fixed_vco: [0] _POSTDIV1 = 7, _POSTDIV2 = 7, USER_DIV = 1, freq = 57
2021-08-28 18:32:47:frequency.c:665:inc_freq_with_fixed_vco: set to 57M, get pcb 25 ~ 28, chip_temp 31 ~ 34
2021-08-28 18:32:47:power_api.c:376:set_to_voltage_by_steps: Set to voltage raw 2100, step by step.
2021-08-28 18:32:58:frequency.c:671:inc_freq_with_fixed_vco: freq_mode 1=1 FREQ_MODE_USER, Conf.Check_Clock_Cnt=0
2021-08-28 18:32:58:driver-btm-api.c:1941:check_clock_counter_domain_last_core: freq 57 clock_counter_limit 6, no check, skip.
2021-08-28 18:33:06:frequency.c:623:inc_freq_with_fixed_vco: get pcb 26 ~ 29, chip_temp 33 ~ 35, now 31.1s, target 39.2
2021-08-28 18:33:06:frequency.c:657:inc_freq_with_fixed_vco: [1] _POSTDIV1 = 7, _POSTDIV2 = 6, USER_DIV = 1, freq = 66
2021-08-28 18:33:06:frequency.c:665:inc_freq_with_fixed_vco: set to 66M, get pcb 26 ~ 29, chip_temp 33 ~ 35
2021-08-28 18:33:06:frequency.c:671:inc_freq_with_fixed_vco: freq_mode 1=1 FREQ_MODE_USER, Conf.Check_Clock_Cnt=0
2021-08-28 18:33:06:driver-btm-api.c:1941:check_clock_counter_domain_last_core: freq 66 clock_counter_limit 7, no check, skip.
2021-08-28 18:33:14:frequency.c:623:inc_freq_with_fixed_vco: get pcb 26 ~ 29, chip_temp 33 ~ 37, now 39.1s, target 40.5
2021-08-28 18:33:14:frequency.c:657:inc_freq_with_fixed_vco: [2] _POSTDIV1 = 6, _POSTDIV2 = 6, USER_DIV = 1, freq = 77
2021-08-28 18:33:14:frequency.c:665:inc_freq_with_fixed_vco: set to 77M, get pcb 26 ~ 29, chip_temp 33 ~ 37
2021-08-28 18:33:14:frequency.c:671:inc_freq_with_fixed_vco: freq_mode 1=1 FREQ_MODE_USER, Conf.Check_Clock_Cnt=0
2021-08-28 18:33:14:driver-btm-api.c:1941:check_clock_counter_domain_last_core: freq 77 clock_counter_limit 9, no check, skip.
2021-08-28 18:33:22:frequency.c:623:inc_freq_with_fixed_vco: get pcb 25 ~ 30, chip_temp 33 ~ 37, now 47.1s, target 41.9
2021-08-28 18:33:22:frequency.c:657:inc_freq_with_fixed_vco: [3] _POSTDIV1 = 7, _POSTDIV2 = 5, USER_DIV = 1, freq = 80
2021-08-28 18:33:22:frequency.c:665:inc_freq_with_fixed_vco: set to 80M, get pcb 25 ~ 30, chip_temp 33 ~ 37
2021-08-28 18:33:22:frequency.c:671:inc_freq_with_fixed_vco: freq_mode 1=1 FREQ_MODE_USER, Conf.Check_Clock_Cnt=0
2021-08-28 18:33:22:driver-btm-api.c:1941:check_clock_counter_domain_last_core: freq 80 clock_counter_limit 9, no check, skip.
2021-08-28 18:33:30:frequency.c:623:inc_freq_with_fixed_vco: get pcb 26 ~ 31, chip_temp 33 ~ 37, now 55.1s, target 43.2
2021-08-28 18:33:30:frequency.c:657:inc_freq_with_fixed_vco: [4] _POSTDIV1 = 6, _POSTDIV2 = 5, USER_DIV = 1, freq = 93
2021-08-28 18:33:30:frequency.c:665:inc_freq_with_fixed_vco: set to 93M, get pcb 26 ~ 31, chip_temp 33 ~ 37
2021-08-28 18:33:30:frequency.c:671:inc_freq_with_fixed_vco: freq_mode 1=1 FREQ_MODE_USER, Conf.Check_Clock_Cnt=0
2021-08-28 18:33:30:driver-btm-api.c:1941:check_clock_counter_domain_last_core: freq 93 clock_counter_limit 11, no check, skip.
2021-08-28 18:33:38:frequency.c:623:inc_freq_with_fixed_vco: get pcb 26 ~ 31, chip_temp 33 ~ 37, now 63.1s, target 40.5
2021-08-28 18:33:38:frequency.c:657:inc_freq_with_fixed_vco: [5] _POSTDIV1 = 7, _POSTDIV2 = 4, USER_DIV = 1, freq = 100
2021-08-28 18:33:38:frequency.c:665:inc_freq_with_fixed_vco: set to 100M, get pcb 26 ~ 31, chip_temp 33 ~ 37
2021-08-28 18:33:39:frequency.c:671:inc_freq_with_fixed_vco: freq_mode 1=1 FREQ_MODE_USER, Conf.Check_Clock_Cnt=0
2021-08-28 18:33:39:driver-btm-api.c:1941:check_clock_counter_domain_last_core: freq 100 clock_counter_limit 13, no check, skip.
2021-08-28 18:33:47:frequency.c:623:inc_freq_with_fixed_vco: get pcb 25 ~ 31, chip_temp 34 ~ 38, now 71.2s, target 41.9
2021-08-28 18:33:47:frequency.c:657:inc_freq_with_fixed_vco: [6] _POSTDIV1 = 5, _POSTDIV2 = 5, USER_DIV = 1, freq = 112
2021-08-28 18:33:47:frequency.c:665:inc_freq_with_fixed_vco: set to 112M, get pcb 25 ~ 31, chip_temp 34 ~ 38
2021-08-28 18:33:47:frequency.c:671:inc_freq_with_fixed_vco: freq_mode 1=1 FREQ_MODE_USER, Conf.Check_Clock_Cnt=0
2021-08-28 18:33:47:driver-btm-api.c:1941:check_clock_counter_domain_last_core: freq 112 clock_counter_limit 14, no check, skip.
2021-08-28 18:33:55:frequency.c:623:inc_freq_with_fixed_vco: get pcb 26 ~ 32, chip_temp 35 ~ 39, now 79.2s, target 43.2
2021-08-28 18:33:55:frequency.c:657:inc_freq_with_fixed_vco: [7] _POSTDIV1 = 6, _POSTDIV2 = 4, USER_DIV = 1, freq = 116
2021-08-28 18:33:55:frequency.c:665:inc_freq_with_fixed_vco: set to 116M, get pcb 26 ~ 32, chip_temp 35 ~ 39
2021-08-28 18:33:55:frequency.c:671:inc_freq_with_fixed_vco: freq_mode 1=1 FREQ_MODE_USER, Conf.Check_Clock_Cnt=0
2021-08-28 18:33:55:driver-btm-api.c:1941:check_clock_counter_domain_last_core: freq 116 clock_counter_limit 15, no check, skip.
2021-08-28 18:34:03:frequency.c:623:inc_freq_with_fixed_vco: get pcb 26 ~ 31, chip_temp 35 ~ 39, now 87.2s, target 44.5
2021-08-28 18:34:03:frequency.c:657:inc_freq_with_fixed_vco: [8] _POSTDIV1 = 7, _POSTDIV2 = 3, USER_DIV = 1, freq = 133
2021-08-28 18:34:03:frequency.c:665:inc_freq_with_fixed_vco: set to 133M, get pcb 26 ~ 31, chip_temp 35 ~ 39
2021-08-28 18:34:03:frequency.c:671:inc_freq_with_fixed_vco: freq_mode 1=1 FREQ_MODE_USER, Conf.Check_Clock_Cnt=0
2021-08-28 18:34:03:driver-btm-api.c:1941:check_clock_counter_domain_last_core: freq 133 clock_counter_limit 18, no check, skip.
2021-08-28 18:34:11:frequency.c:623:inc_freq_with_fixed_vco: get pcb 24 ~ 32, chip_temp 36 ~ 41, now 95.2s, target 42.9
2021-08-28 18:34:12:frequency.c:623:inc_freq_with_fixed_vco: get pcb 26 ~ 32, chip_temp 36 ~ 40, now 96.2s, target 43.0
2021-08-28 18:34:12:frequency.c:657:inc_freq_with_fixed_vco: [9] _POSTDIV1 = 5, _POSTDIV2 = 4, USER_DIV = 1, freq = 140
2021-08-28 18:34:12:frequency.c:665:inc_freq_with_fixed_vco: set to 140M, get pcb 26 ~ 32, chip_temp 36 ~ 40
2021-08-28 18:34:12:frequency.c:671:inc_freq_with_fixed_vco: freq_mode 1=1 FREQ_MODE_USER, Conf.Check_Clock_Cnt=0
2021-08-28 18:34:12:driver-btm-api.c:1941:check_clock_counter_domain_last_core: freq 140 clock_counter_limit 19, no check, skip.
2021-08-28 18:34:20:frequency.c:623:inc_freq_with_fixed_vco: get pcb 26 ~ 32, chip_temp 37 ~ 40, now 104.2s, target 44.4
2021-08-28 18:34:20:frequency.c:657:inc_freq_with_fixed_vco: [10] _POSTDIV1 = 6, _POSTDIV2 = 3, USER_DIV = 1, freq = 155
2021-08-28 18:34:20:frequency.c:665:inc_freq_with_fixed_vco: set to 155M, get pcb 26 ~ 32, chip_temp 37 ~ 40
2021-08-28 18:34:20:frequency.c:671:inc_freq_with_fixed_vco: freq_mode 1=1 FREQ_MODE_USER, Conf.Check_Clock_Cnt=0
2021-08-28 18:34:20:driver-btm-api.c:1941:check_clock_counter_domain_last_core: freq 155 clock_counter_limit 21, no check, skip.
2021-08-28 18:34:28:frequency.c:623:inc_freq_with_fixed_vco: get pcb 27 ~ 33, chip_temp 38 ~ 42, now 112.2s, target 45.7
2021-08-28 18:34:28:frequency.c:657:inc_freq_with_fixed_vco: [11] _POSTDIV1 = 5, _POSTDIV2 = 3, USER_DIV = 1, freq = 186
2021-08-28 18:34:28:frequency.c:665:inc_freq_with_fixed_vco: set to 186M, get pcb 27 ~ 33, chip_temp 38 ~ 42
2021-08-28 18:34:28:frequency.c:671:inc_freq_with_fixed_vco: freq_mode 1=1 FREQ_MODE_USER, Conf.Check_Clock_Cnt=0
2021-08-28 18:34:28:driver-btm-api.c:1941:check_clock_counter_domain_last_core: freq 186 clock_counter_limit 26, no check, skip.
2021-08-28 18:34:36:frequency.c:623:inc_freq_with_fixed_vco: get pcb 27 ~ 33, chip_temp 40 ~ 43, now 120.2s, target 47.0
2021-08-28 18:34:36:frequency.c:657:inc_freq_with_fixed_vco: [12] _POSTDIV1 = 7, _POSTDIV2 = 2, USER_DIV = 1, freq = 200
2021-08-28 18:34:36:frequency.c:665:inc_freq_with_fixed_vco: set to 200M, get pcb 27 ~ 33, chip_temp 40 ~ 43
2021-08-28 18:34:36:frequency.c:671:inc_freq_with_fixed_vco: freq_mode 1=1 FREQ_MODE_USER, Conf.Check_Clock_Cnt=0
2021-08-28 18:34:36:driver-btm-api.c:1941:check_clock_counter_domain_last_core: freq 200 clock_counter_limit 29, no check, skip.
2021-08-28 18:34:44:frequency.c:623:inc_freq_with_fixed_vco: get pcb 28 ~ 34, chip_temp 40 ~ 44, now 128.3s, target 48.4
2021-08-28 18:34:44:frequency.c:657:inc_freq_with_fixed_vco: [13] _POSTDIV1 = 6, _POSTDIV2 = 2, USER_DIV = 1, freq = 233
2021-08-28 18:34:44:frequency.c:665:inc_freq_with_fixed_vco: set to 233M, get pcb 28 ~ 34, chip_temp 40 ~ 44
2021-08-28 18:34:44:frequency.c:671:inc_freq_with_fixed_vco: freq_mode 1=1 FREQ_MODE_USER, Conf.Check_Clock_Cnt=0
2021-08-28 18:34:44:driver-btm-api.c:1941:check_clock_counter_domain_last_core: freq 233 clock_counter_limit 34, no check, skip.
2021-08-28 18:34:52:frequency.c:623:inc_freq_with_fixed_vco: get pcb 28 ~ 35, chip_temp 42 ~ 45, now 136.3s, target 49.7
2021-08-28 18:34:52:frequency.c:657:inc_freq_with_fixed_vco: [14] _POSTDIV1 = 5, _POSTDIV2 = 2, USER_DIV = 1, freq = 280
2021-08-28 18:34:52:frequency.c:665:inc_freq_with_fixed_vco: set to 280M, get pcb 28 ~ 35, chip_temp 42 ~ 45
2021-08-28 18:34:52:frequency.c:671:inc_freq_with_fixed_vco: freq_mode 1=1 FREQ_MODE_USER, Conf.Check_Clock_Cnt=0
2021-08-28 18:34:52:driver-btm-api.c:1941:check_clock_counter_domain_last_core: freq 280 clock_counter_limit 41, no check, skip.
2021-08-28 18:35:00:frequency.c:623:inc_freq_with_fixed_vco: get pcb 28 ~ 36, chip_temp 45 ~ 48, now 144.3s, target 51.0
2021-08-28 18:35:00:frequency.c:657:inc_freq_with_fixed_vco: [15] _POSTDIV1 = 7, _POSTDIV2 = 1, USER_DIV = 1, freq = 400
2021-08-28 18:35:00:frequency.c:665:inc_freq_with_fixed_vco: set to 400M, get pcb 28 ~ 36, chip_temp 45 ~ 48
2021-08-28 18:35:00:frequency.c:671:inc_freq_with_fixed_vco: freq_mode 1=1 FREQ_MODE_USER, Conf.Check_Clock_Cnt=0
2021-08-28 18:35:00:driver-btm-api.c:1941:check_clock_counter_domain_last_core: freq 400 clock_counter_limit 61, no check, skip.
2021-08-28 18:35:02:driver-hash-chip.c:737:dump_adc_voltage_v2: get ADC_DATAOUT from chain 0 with 0 regs timeout.
chain 0 domain 0: d0 0.403, d1 0.408, d2 0.391, d3 0.400, sum = 1.601868
chain 0 domain 1: d0 0.409, d1 0.390, d2 0.413, d3 0.404, sum = 1.615295
chain 0 domain 2: d0 0.393, d1 0.396, d2 0.405, d3 0.398, sum = 1.591125
chain 0 domain 3: d0 0.406, d1 0.406, d2 0.374, d3 0.395, sum = 1.581055
chain 0 domain 4: d0 0.401, d1 0.400, d2 0.406, d3 0.402, sum = 1.608459
chain 0 domain 5: d0 0.406, d1 0.406, d2 0.381, d3 0.398, sum = 1.590942
chain 0 domain 6: d0 0.400, d1 0.390, d2 0.383, d3 0.391, sum = 1.563843
chain 0 domain 7: d0 0.404, d1 0.393, d2 0.392, d3 0.396, sum = 1.584961
chain 0 domain 8: d0 0.392, d1 0.388, d2 0.398, d3 0.392, sum = 1.569824
chain 0 domain 9: d0 0.412, d1 0.416, d2 0.415, d3 0.414, sum = 1.658142
chain 0 domain 10: d0 0.414, d1 0.403, d2 0.429, d3 0.415, sum = 1.660828
chain 0 domain 11: d0 0.401, d1 0.394, d2 0.396, d3 0.397, sum = 1.587341
chain 0 domain 12: d0 0.386, d1 0.380, d2 0.378, d3 0.359, sum = 1.502808
2021-08-28 18:35:03:driver-hash-chip.c:737:dump_adc_voltage_v2: get ADC_DATAOUT from chain 1 with 0 regs timeout.
chain 1 domain 0: d0 0.405, d1 0.408, d2 0.413, d3 0.409, sum = 1.635498
chain 1 domain 1: d0 0.404, d1 0.408, d2 0.387, d3 0.400, sum = 1.598999
chain 1 domain 2: d0 0.401, d1 0.397, d2 0.424, d3 0.407, sum = 1.629333
chain 1 domain 3: d0 0.399, d1 0.404, d2 0.385, d3 0.396, sum = 1.584229
chain 1 domain 4: d0 0.399, d1 0.398, d2 0.398, d3 0.398, sum = 1.594055
chain 1 domain 5: d0 0.407, d1 0.393, d2 0.415, d3 0.405, sum = 1.618591
chain 1 domain 6: d0 0.396, d1 0.398, d2 0.394, d3 0.396, sum = 1.582397
chain 1 domain 7: d0 0.407, d1 0.392, d2 0.396, d3 0.398, sum = 1.593445
chain 1 domain 8: d0 0.402, d1 0.388, d2 0.389, d3 0.393, sum = 1.572571
chain 1 domain 9: d0 0.402, d1 0.388, d2 0.395, d3 0.395, sum = 1.578918
chain 1 domain 10: d0 0.398, d1 0.404, d2 0.387, d3 0.396, sum = 1.585022
chain 1 domain 11: d0 0.395, d1 0.390, d2 0.392, d3 0.392, sum = 1.568848
chain 1 domain 12: d0 0.388, d1 0.383, d2 0.382, d3 0.378, sum = 1.531494
2021-08-28 18:35:03:driver-hash-chip.c:493:check_adc_voltage: PASS domainn volt check: request 0.800 (index 0, open_core)
2021-08-28 18:35:09:frequency.c:623:inc_freq_with_fixed_vco: get pcb 28 ~ 37, chip_temp 48 ~ 53, now 153.4s, target 52.6
2021-08-28 18:35:09:frequency.c:644:inc_freq_with_fixed_vco: heat speed too fast! current_temp 53 > 52.6 target_temp.
2021-08-28 18:35:15:frequency.c:623:inc_freq_with_fixed_vco: get pcb 30 ~ 39, chip_temp 50 ~ 55, now 159.4s, target 53.6
2021-08-28 18:35:15:frequency.c:644:inc_freq_with_fixed_vco: heat speed too fast! current_temp 55 > 53.6 target_temp.
2021-08-28 18:35:21:frequency.c:623:inc_freq_with_fixed_vco: get pcb 29 ~ 40, chip_temp 49 ~ 56, now 165.4s, target 54.6
2021-08-28 18:35:21:frequency.c:644:inc_freq_with_fixed_vco: heat speed too fast! current_temp 56 > 54.6 target_temp.
2021-08-28 18:35:27:frequency.c:623:inc_freq_with_fixed_vco: get pcb 27 ~ 41, chip_temp 52 ~ 57, now 171.4s, target 55.6
2021-08-28 18:35:27:frequency.c:644:inc_freq_with_fixed_vco: heat speed too fast! current_temp 57 > 55.6 target_temp.
2021-08-28 18:35:33:frequency.c:623:inc_freq_with_fixed_vco: get pcb 29 ~ 42, chip_temp 50 ~ 58, now 177.4s, target 56.6
2021-08-28 18:35:33:frequency.c:644:inc_freq_with_fixed_vco: heat speed too fast! current_temp 58 > 56.6 target_temp.
2021-08-28 18:35:39:frequency.c:623:inc_freq_with_fixed_vco: get pcb 29 ~ 44, chip_temp 53 ~ 59, now 183.4s, target 57.6
2021-08-28 18:35:39:frequency.c:644:inc_freq_with_fixed_vco: heat speed too fast! current_temp 59 > 57.6 target_temp.
2021-08-28 18:35:45:frequency.c:623:inc_freq_with_fixed_vco: get pcb 29 ~ 43, chip_temp 52 ~ 60, now 189.4s, target 58.6
2021-08-28 18:35:45:frequency.c:644:inc_freq_with_fixed_vco: heat speed too fast! current_temp 60 > 58.6 target_temp.
2021-08-28 18:35:51:frequency.c:623:inc_freq_with_fixed_vco: get pcb 29 ~ 44, chip_temp 51 ~ 60, now 195.4s, target 59.6
2021-08-28 18:35:51:frequency.c:644:inc_freq_with_fixed_vco: heat speed too fast! current_temp 60 > 59.6 target_temp.
2021-08-28 18:35:57:frequency.c:623:inc_freq_with_fixed_vco: get pcb 31 ~ 44, chip_temp 52 ~ 62, now 201.4s, target 60.6
2021-08-28 18:35:57:frequency.c:644:inc_freq_with_fixed_vco: heat speed too fast! current_temp 62 > 60.6 target_temp.
2021-08-28 18:36:03:frequency.c:623:inc_freq_with_fixed_vco: get pcb 30 ~ 45, chip_temp 51 ~ 61, now 207.4s, target 61.6
2021-08-28 18:36:04:frequency.c:623:inc_freq_with_fixed_vco: get pcb 30 ~ 46, chip_temp 52 ~ 61, now 208.4s, target 61.7
2021-08-28 18:36:05:frequency.c:623:inc_freq_with_fixed_vco: get pcb 30 ~ 46, chip_temp 52 ~ 61, now 209.4s, target 61.9
2021-08-28 18:36:06:frequency.c:623:inc_freq_with_fixed_vco: get pcb 30 ~ 45, chip_temp 51 ~ 61, now 210.4s, target 62.1
2021-08-28 18:36:07:frequency.c:623:inc_freq_with_fixed_vco: get pcb 29 ~ 45, chip_temp 53 ~ 62, now 211.4s, target 62.2
2021-08-28 18:36:08:frequency.c:623:inc_freq_with_fixed_vco: get pcb 30 ~ 45, chip_temp 52 ~ 61, now 212.4s, target 62.4
2021-08-28 18:36:09:frequency.c:623:inc_freq_with_fixed_vco: get pcb 29 ~ 45, chip_temp 51 ~ 61, now 213.4s, target 62.6
2021-08-28 18:36:10:frequency.c:623:inc_freq_with_fixed_vco: get pcb 30 ~ 46, chip_temp 51 ~ 62, now 214.4s, target 62.7
2021-08-28 18:36:11:frequency.c:623:inc_freq_with_fixed_vco: get pcb 30 ~ 46, chip_temp 52 ~ 62, now 215.4s, target 62.9
2021-08-28 18:36:12:frequency.c:623:inc_freq_with_fixed_vco: get pcb 29 ~ 45, chip_temp 51 ~ 62, now 216.4s, target 63.1
2021-08-28 18:36:13:frequency.c:623:inc_freq_with_fixed_vco: get pcb 31 ~ 45, chip_temp 52 ~ 62, now 217.4s, target 63.2
2021-08-28 18:36:14:frequency.c:623:inc_freq_with_fixed_vco: get pcb 30 ~ 46, chip_temp 51 ~ 62, now 218.4s, target 63.4
2021-08-28 18:36:15:frequency.c:623:inc_freq_with_fixed_vco: get pcb 29 ~ 45, chip_temp 52 ~ 62, now 219.4s, target 63.6
2021-08-28 18:36:16:frequency.c:623:inc_freq_with_fixed_vco: get pcb 32 ~ 46, chip_temp 51 ~ 62, now 220.4s, target 63.7
2021-08-28 18:36:17:frequency.c:623:inc_freq_with_fixed_vco: get pcb 30 ~ 46, chip_temp 51 ~ 61, now 221.4s, target 63.9
2021-08-28 18:36:17:frequency.c:657:inc_freq_with_fixed_vco: [16] _POSTDIV1 = 6, _POSTDIV2 = 1, USER_DIV = 1, freq = 466
2021-08-28 18:36:17:frequency.c:665:inc_freq_with_fixed_vco: set to 466M, get pcb 30 ~ 46, chip_temp 51 ~ 61
2021-08-28 18:36:17:power_api.c:376:set_to_voltage_by_steps: Set to voltage raw 2020, step by step.
2021-08-28 18:36:26:driver-hash-chip.c:737:dump_adc_voltage_v2: get ADC_DATAOUT from chain 0 with 0 regs timeout.
chain 0 domain 0: d0 0.387, d1 0.385, d2 0.402, d3 0.391, sum = 1.566162
chain 0 domain 1: d0 0.387, d1 0.388, d2 0.388, d3 0.387, sum = 1.550354
chain 0 domain 2: d0 0.385, d1 0.373, d2 0.374, d3 0.359, sum = 1.491638
chain 0 domain 3: d0 0.393, d1 0.384, d2 0.370, d3 0.350, sum = 1.496460
chain 0 domain 4: d0 0.391, d1 0.394, d2 0.376, d3 0.387, sum = 1.549377
chain 0 domain 5: d0 0.389, d1 0.379, d2 0.387, d3 0.385, sum = 1.539734
chain 0 domain 6: d0 0.377, d1 0.384, d2 0.387, d3 0.347, sum = 1.494690
chain 0 domain 7: d0 0.387, d1 0.389, d2 0.390, d3 0.380, sum = 1.545471
chain 0 domain 8: d0 0.376, d1 0.383, d2 0.374, d3 0.358, sum = 1.491455
chain 0 domain 9: d0 0.403, d1 0.390, d2 0.381, d3 0.391, sum = 1.565308
chain 0 domain 10: d0 0.395, d1 0.390, d2 0.397, d3 0.394, sum = 1.575317
chain 0 domain 11: d0 0.385, d1 0.378, d2 0.382, d3 0.349, sum = 1.494568
chain 0 domain 12: d0 0.367, d1 0.361, d2 0.360, d3 0.364, sum = 1.453369
2021-08-28 18:36:27:driver-hash-chip.c:737:dump_adc_voltage_v2: get ADC_DATAOUT from chain 1 with 0 regs timeout.
chain 1 domain 0: d0 0.393, d1 0.399, d2 0.377, d3 0.389, sum = 1.558228
chain 1 domain 1: d0 0.395, d1 0.387, d2 0.376, d3 0.386, sum = 1.542969
chain 1 domain 2: d0 0.393, d1 0.381, d2 0.381, d3 0.378, sum = 1.533264
chain 1 domain 3: d0 0.392, d1 0.382, d2 0.371, d3 0.378, sum = 1.522400
chain 1 domain 4: d0 0.393, d1 0.379, d2 0.379, d3 0.361, sum = 1.511780
chain 1 domain 5: d0 0.388, d1 0.380, d2 0.386, d3 0.372, sum = 1.526489
chain 1 domain 6: d0 0.381, d1 0.386, d2 0.380, d3 0.351, sum = 1.497375
chain 1 domain 7: d0 0.393, d1 0.385, d2 0.388, d3 0.388, sum = 1.554077
chain 1 domain 8: d0 0.382, d1 0.388, d2 0.365, d3 0.359, sum = 1.493652
chain 1 domain 9: d0 0.386, d1 0.378, d2 0.364, d3 0.367, sum = 1.494202
chain 1 domain 10: d0 0.390, d1 0.379, d2 0.369, d3 0.358, sum = 1.495544
chain 1 domain 11: d0 0.378, d1 0.373, d2 0.373, d3 0.368, sum = 1.491760
chain 1 domain 12: d0 0.371, d1 0.366, d2 0.365, d3 0.365, sum = 1.466003
2021-08-28 18:36:27:driver-hash-chip.c:493:check_adc_voltage: PASS domainn volt check: request 0.800 (index 0, open_core)
2021-08-28 18:36:27:frequency.c:671:inc_freq_with_fixed_vco: freq_mode 1=1 FREQ_MODE_USER, Conf.Check_Clock_Cnt=0
2021-08-28 18:36:27:driver-btm-api.c:1941:check_clock_counter_domain_last_core: freq 466 clock_counter_limit 71, no check, skip.
2021-08-28 18:36:29:driver-hash-chip.c:737:dump_adc_voltage_v2: get ADC_DATAOUT from chain 0 with 0 regs timeout.
chain 0 domain 0: d0 0.390, d1 0.381, d2 0.388, d3 0.386, sum = 1.544861
chain 0 domain 1: d0 0.388, d1 0.376, d2 0.393, d3 0.338, sum = 1.494202
chain 0 domain 2: d0 0.384, d1 0.372, d2 0.390, d3 0.346, sum = 1.491333
chain 0 domain 3: d0 0.385, d1 0.377, d2 0.382, d3 0.358, sum = 1.502991
chain 0 domain 4: d0 0.388, d1 0.394, d2 0.367, d3 0.383, sum = 1.531982
chain 0 domain 5: d0 0.393, d1 0.383, d2 0.370, d3 0.369, sum = 1.514648
chain 0 domain 6: d0 0.383, d1 0.381, d2 0.362, d3 0.365, sum = 1.491455
chain 0 domain 7: d0 0.393, d1 0.377, d2 0.379, d3 0.383, sum = 1.531311
chain 0 domain 8: d0 0.377, d1 0.372, d2 0.376, d3 0.374, sum = 1.499329
chain 0 domain 9: d0 0.401, d1 0.384, d2 0.386, d3 0.390, sum = 1.561707
chain 0 domain 10: d0 0.398, d1 0.386, d2 0.389, d3 0.391, sum = 1.564575
chain 0 domain 11: d0 0.390, d1 0.377, d2 0.373, d3 0.356, sum = 1.495605
chain 0 domain 12: d0 0.369, d1 0.363, d2 0.361, d3 0.367, sum = 1.459839
2021-08-28 18:36:30:driver-hash-chip.c:737:dump_adc_voltage_v2: get ADC_DATAOUT from chain 1 with 0 regs timeout.
chain 1 domain 0: d0 0.396, d1 0.395, d2 0.381, d3 0.391, sum = 1.562988
chain 1 domain 1: d0 0.389, d1 0.381, d2 0.403, d3 0.380, sum = 1.553223
chain 1 domain 2: d0 0.386, d1 0.387, d2 0.389, d3 0.387, sum = 1.549255
chain 1 domain 3: d0 0.383, d1 0.387, d2 0.395, d3 0.389, sum = 1.554504
chain 1 domain 4: d0 0.386, d1 0.381, d2 0.405, d3 0.391, sum = 1.562866
chain 1 domain 5: d0 0.392, d1 0.378, d2 0.390, d3 0.364, sum = 1.523682
chain 1 domain 6: d0 0.387, d1 0.375, d2 0.377, d3 0.359, sum = 1.497681
chain 1 domain 7: d0 0.386, d1 0.381, d2 0.392, d3 0.339, sum = 1.498657
chain 1 domain 8: d0 0.379, d1 0.381, d2 0.377, d3 0.360, sum = 1.496948
chain 1 domain 9: d0 0.386, d1 0.375, d2 0.368, d3 0.366, sum = 1.494812
chain 1 domain 10: d0 0.384, d1 0.380, d2 0.382, d3 0.352, sum = 1.496887
chain 1 domain 11: d0 0.378, d1 0.373, d2 0.374, d3 0.367, sum = 1.492249
chain 1 domain 12: d0 0.371, d1 0.366, d2 0.365, d3 0.365, sum = 1.467224
2021-08-28 18:36:30:driver-hash-chip.c:493:check_adc_voltage: PASS domainn volt check: request 0.800 (index 0, open_core)
2021-08-28 18:36:36:frequency.c:623:inc_freq_with_fixed_vco: get pcb 29 ~ 45, chip_temp 50 ~ 62, now 240.5s, target 67.1
2021-08-28 18:36:36:frequency.c:657:inc_freq_with_fixed_vco: [17] _POSTDIV1 = 5, _POSTDIV2 = 1, USER_DIV = 1, freq = 560
2021-08-28 18:36:36:frequency.c:665:inc_freq_with_fixed_vco: set to 560M, get pcb 29 ~ 45, chip_temp 50 ~ 62
2021-08-28 18:36:36:power_api.c:376:set_to_voltage_by_steps: Set to voltage raw 1910, step by step.
2021-08-28 18:36:47:driver-hash-chip.c:737:dump_adc_voltage_v2: get ADC_DATAOUT from chain 0 with 0 regs timeout.
chain 0 domain 0: d0 0.369, d1 0.373, d2 0.357, d3 0.370, sum = 1.468689
chain 0 domain 1: d0 0.364, d1 0.358, d2 0.374, d3 0.334, sum = 1.430359
chain 0 domain 2: d0 0.358, d1 0.355, d2 0.354, d3 0.380, sum = 1.446899
chain 0 domain 3: d0 0.365, d1 0.369, d2 0.346, d3 0.376, sum = 1.456360
chain 0 domain 4: d0 0.367, d1 0.361, d2 0.365, d3 0.359, sum = 1.452881
chain 0 domain 5: d0 0.365, d1 0.360, d2 0.371, d3 0.352, sum = 1.447510
chain 0 domain 6: d0 0.356, d1 0.355, d2 0.352, d3 0.368, sum = 1.432007
chain 0 domain 7: d0 0.366, d1 0.370, d2 0.368, d3 0.342, sum = 1.445496
chain 0 domain 8: d0 0.362, d1 0.350, d2 0.351, d3 0.383, sum = 1.445679
chain 0 domain 9: d0 0.380, d1 0.364, d2 0.364, d3 0.382, sum = 1.490906
chain 0 domain 10: d0 0.372, d1 0.368, d2 0.380, d3 0.363, sum = 1.483032
chain 0 domain 11: d0 0.362, d1 0.356, d2 0.361, d3 0.353, sum = 1.431824
chain 0 domain 12: d0 0.349, d1 0.343, d2 0.342, d3 0.347, sum = 1.381714
2021-08-28 18:36:48:driver-hash-chip.c:737:dump_adc_voltage_v2: get ADC_DATAOUT from chain 1 with 0 regs timeout.
chain 1 domain 0: d0 0.371, d1 0.365, d2 0.367, d3 0.360, sum = 1.462708
chain 1 domain 1: d0 0.372, d1 0.357, d2 0.368, d3 0.380, sum = 1.477234
chain 1 domain 2: d0 0.364, d1 0.368, d2 0.363, d3 0.380, sum = 1.474915
chain 1 domain 3: d0 0.363, d1 0.367, d2 0.351, d3 0.359, sum = 1.440430
chain 1 domain 4: d0 0.364, d1 0.362, d2 0.374, d3 0.380, sum = 1.480042
chain 1 domain 5: d0 0.370, d1 0.371, d2 0.362, d3 0.377, sum = 1.480225
chain 1 domain 6: d0 0.366, d1 0.355, d2 0.355, d3 0.368, sum = 1.444702
chain 1 domain 7: d0 0.366, d1 0.359, d2 0.363, d3 0.362, sum = 1.449768
chain 1 domain 8: d0 0.359, d1 0.358, d2 0.376, d3 0.358, sum = 1.451538
chain 1 domain 9: d0 0.359, d1 0.353, d2 0.356, d3 0.368, sum = 1.435974
chain 1 domain 10: d0 0.366, d1 0.369, d2 0.343, d3 0.356, sum = 1.433228
chain 1 domain 11: d0 0.357, d1 0.353, d2 0.368, d3 0.365, sum = 1.442200
chain 1 domain 12: d0 0.351, d1 0.347, d2 0.346, d3 0.346, sum = 1.389648
2021-08-28 18:36:48:driver-hash-chip.c:493:check_adc_voltage: PASS domainn volt check: request 0.800 (index 0, open_core)
2021-08-28 18:36:48:frequency.c:671:inc_freq_with_fixed_vco: freq_mode 1=1 FREQ_MODE_USER, Conf.Check_Clock_Cnt=0
2021-08-28 18:36:48:driver-btm-api.c:1941:check_clock_counter_domain_last_core: freq 560 clock_counter_limit 86, no check, skip.
2021-08-28 18:36:51:driver-hash-chip.c:737:dump_adc_voltage_v2: get ADC_DATAOUT from chain 0 with 0 regs timeout.
chain 0 domain 0: d0 0.365, d1 0.372, d2 0.366, d3 0.352, sum = 1.454163
chain 0 domain 1: d0 0.363, d1 0.367, d2 0.346, d3 0.372, sum = 1.448059
chain 0 domain 2: d0 0.359, d1 0.358, d2 0.351, d3 0.351, sum = 1.419678
chain 0 domain 3: d0 0.364, d1 0.372, d2 0.343, d3 0.362, sum = 1.441833
chain 0 domain 4: d0 0.364, d1 0.374, d2 0.365, d3 0.345, sum = 1.448853
chain 0 domain 5: d0 0.367, d1 0.356, d2 0.363, d3 0.353, sum = 1.439941
chain 0 domain 6: d0 0.359, d1 0.355, d2 0.356, d3 0.354, sum = 1.423218
chain 0 domain 7: d0 0.364, d1 0.373, d2 0.365, d3 0.343, sum = 1.445129
chain 0 domain 8: d0 0.356, d1 0.366, d2 0.342, d3 0.369, sum = 1.432861
chain 0 domain 9: d0 0.372, d1 0.378, d2 0.372, d3 0.366, sum = 1.487854
chain 0 domain 10: d0 0.370, d1 0.384, d2 0.366, d3 0.356, sum = 1.476562
chain 0 domain 11: d0 0.364, d1 0.356, d2 0.355, d3 0.352, sum = 1.428406
chain 0 domain 12: d0 0.351, d1 0.345, d2 0.344, d3 0.349, sum = 1.388672
2021-08-28 18:36:51:driver-hash-chip.c:737:dump_adc_voltage_v2: get ADC_DATAOUT from chain 1 with 0 regs timeout.
chain 1 domain 0: d0 0.373, d1 0.361, d2 0.367, d3 0.370, sum = 1.471619
chain 1 domain 1: d0 0.366, d1 0.360, d2 0.379, d3 0.345, sum = 1.449036
chain 1 domain 2: d0 0.365, d1 0.361, d2 0.369, d3 0.356, sum = 1.451111
chain 1 domain 3: d0 0.361, d1 0.362, d2 0.354, d3 0.383, sum = 1.460876
chain 1 domain 4: d0 0.364, d1 0.360, d2 0.365, d3 0.359, sum = 1.448425
chain 1 domain 5: d0 0.373, d1 0.359, d2 0.365, d3 0.354, sum = 1.450989
chain 1 domain 6: d0 0.368, d1 0.360, d2 0.359, d3 0.350, sum = 1.436279
chain 1 domain 7: d0 0.366, d1 0.360, d2 0.362, d3 0.358, sum = 1.445740
chain 1 domain 8: d0 0.359, d1 0.357, d2 0.376, d3 0.338, sum = 1.429382
chain 1 domain 9: d0 0.357, d1 0.361, d2 0.371, d3 0.333, sum = 1.421875
chain 1 domain 10: d0 0.362, d1 0.359, d2 0.363, d3 0.358, sum = 1.441772
chain 1 domain 11: d0 0.357, d1 0.355, d2 0.355, d3 0.355, sum = 1.422180
chain 1 domain 12: d0 0.351, d1 0.347, d2 0.346, d3 0.347, sum = 1.391235
2021-08-28 18:36:51:driver-hash-chip.c:493:check_adc_voltage: PASS domainn volt check: request 0.800 (index 0, open_core)
2021-08-28 18:36:51:frequency.c:717:inc_freq_with_fixed_step: chain = 0, freq_start = 560, freq_end = 560, freq_step = 5, is_higher_voltage = true
2021-08-28 18:36:51:frequency.c:717:inc_freq_with_fixed_step: chain = 1, freq_start = 560, freq_end = 560, freq_step = 5, is_higher_voltage = true
2021-08-28 18:36:51:frequency.c:442:inc_asic_diff_freq_by_steps: chain = 0, start = 560, freq_step = 5
2021-08-28 18:36:53:frequency.c:442:inc_asic_diff_freq_by_steps: chain = 1, start = 560, freq_step = 5
2021-08-28 18:36:54:driver-btm-api.c:666:set_timeout: freq = 570, percent = 90, hcn = 707788, timeout = 1240
2021-08-28 18:36:54:power_api.c:353:set_to_working_voltage_by_steps: Set to voltage raw 1840, step by step.
2021-08-28 18:37:03:thread.c:1533:create_check_system_status_thread: create thread
2021-08-28 18:37:03:thread.c:1508:create_asic_status_monitor_thread: create thread
2021-08-28 18:37:03:driver-btm-api.c:2599:bitmain_soc_init: Init done!
2021-08-28 18:37:09:driver-btm-api.c:247:set_miner_status: STATUS_OKAY
2021-08-28 18:37:10:frequency.c:107:get_ideal_hash_rate_GH: ideal_hash_rate = 33584
2021-08-28 18:37:10:frequency.c:128:get_sale_hash_rate_GH: sale_hash_rate = 32000
2021-08-28 18:37:18:driver-btm-api.c:1634:dhash_chip_send_job: Version num 8
2021-08-28 18:37:18:driver-btm-api.c:1778:dhash_chip_send_job: stime.tv_sec 1630175838, block_ntime 1630175827
2021-08-28 19:07:32:thread.c:234:calc_hashrate_avg: avg rate is 31789.46 in 30 mins
2021-08-28 19:07:32:temperature.c:440:temp_statistics_show: pcb temp 30~46 chip temp 49~63
0

Comment actions Permalink
dony

September 19, 2022 04:54
Booting Linux on physical CPU 0x0
Linux version 4.6.0-xilinx-gff8137b-dirty (lzq@armdev2) (gcc version 4.8.3 20140320 (prerelease) (Sourcery CodeBench Lite 2014.05-23) ) #25 SMP PREEMPT Fri Nov 23 15:30:52 CST 2018
CPU: ARMv7 Processor [413fc090] revision 0 (ARMv7), cr=18c5387d
CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
Machine model: Xilinx Zynq
cma: Reserved 16 MiB at 0x0e000000
Memory policy: Data cache writealloc
On node 0 totalpages: 61440
free_area_init_node: node 0, pgdat c0b39280, node_mem_map cde10000
Normal zone: 480 pages used for memmap
Normal zone: 0 pages reserved
Normal zone: 61440 pages, LIFO batch:15
percpu: Embedded 12 pages/cpu @cddf1000 s19776 r8192 d21184 u49152
pcpu-alloc: s19776 r8192 d21184 u49152 alloc=12*4096
pcpu-alloc: [0] 0 [0] 1
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 60960
Kernel command line: mem=240M console=ttyPS0,115200 ramdisk_size=33554432 root=/dev/ram rw earlyprintk
PID hash table entries: 1024 (order: 0, 4096 bytes)
Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
Memory: 203752K/245760K available (6345K kernel code, 231K rwdata, 1896K rodata, 1024K init, 223K bss, 25624K reserved, 16384K cma-reserved, 0K highmem)
Virtual kernel memory layout:
vector : 0xffff0000 - 0xffff1000 ( 4 kB)
fixmap : 0xffc00000 - 0xfff00000 (3072 kB)
vmalloc : 0xcf800000 - 0xff800000 ( 768 MB)
lowmem : 0xc0000000 - 0xcf000000 ( 240 MB)
pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
modules : 0xbf000000 - 0xbfe00000 ( 14 MB)
.text : 0xc0008000 - 0xc090c424 (9234 kB)
.init : 0xc0a00000 - 0xc0b00000 (1024 kB)
.data : 0xc0b00000 - 0xc0b39fe0 ( 232 kB)
.bss : 0xc0b39fe0 - 0xc0b71c28 ( 224 kB)
Preemptible hierarchical RCU implementation.
Build-time adjustment of leaf fanout to 32.
RCU restricting CPUs from NR_CPUS=4 to nr_cpu_ids=2.
RCU: Adjusting geometry for rcu_fanout_leaf=32, nr_cpu_ids=2
NR_IRQS:16 nr_irqs:16 16
efuse mapped to cf800000
ps7-slcr mapped to cf802000
L2C: platform modifies aux control register: 0x72360000 -> 0x72760000
L2C: DT/platform modifies aux control register: 0x72360000 -> 0x72760000
L2C-310 erratum 769419 enabled
L2C-310 enabling early BRESP for Cortex-A9
L2C-310 full line of zeros enabled for Cortex-A9
L2C-310 ID prefetch enabled, offset 1 lines
L2C-310 dynamic clock gating enabled, standby mode enabled
L2C-310 cache controller enabled, 8 ways, 512 kB
L2C-310: CACHE_ID 0x410000c8, AUX_CTRL 0x76760001
zynq_clock_init: clkc starts at cf802100
Zynq clock init
sched_clock: 64 bits at 333MHz, resolution 3ns, wraps every 4398046511103ns
clocksource: arm_global_timer: mask: 0xffffffffffffffff max_cycles: 0x4ce07af025, max_idle_ns: 440795209040 ns
Switching to timer-based delay loop, resolution 3ns
clocksource: ttc_clocksource: mask: 0xffff max_cycles: 0xffff, max_idle_ns: 537538477 ns
ps7-ttc #0 at cf80a000, irq=18
Console: colour dummy device 80x30
Calibrating delay loop (skipped), value calculated using timer frequency.. 666.66 BogoMIPS (lpj=3333333)
pid_max: default: 32768 minimum: 301
Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
CPU: Testing write buffer coherency: ok
CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
Setting up static identity map for 0x100000 - 0x100058
CPU1: failed to boot: -1
Brought up 1 CPUs
SMP: Total of 1 processors activated (666.66 BogoMIPS).
CPU: All CPU(s) started in SVC mode.
devtmpfs: initialized
VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 4
clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
pinctrl core: initialized pinctrl subsystem
NET: Registered protocol family 16
DMA: preallocated 256 KiB pool for atomic coherent allocations
cpuidle: using governor menu
hw-breakpoint: found 5 (+1 reserved) breakpoint and 1 watchpoint registers.
hw-breakpoint: maximum watchpoint size is 4 bytes.
zynq-ocm f800c000.ps7-ocmc: ZYNQ OCM pool: 256 KiB @ 0xcf880000
vgaarb: loaded
SCSI subsystem initialized
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
media: Linux media interface: v0.10
Linux video capture interface: v2.00
pps_core: LinuxPPS API ver. 1 registered
pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
PTP clock support registered
EDAC MC: Ver: 3.0.0
Advanced Linux Sound Architecture Driver Initialized.
clocksource: Switched to clocksource arm_global_timer
NET: Registered protocol family 2
TCP established hash table entries: 2048 (order: 1, 8192 bytes)
TCP bind hash table entries: 2048 (order: 2, 16384 bytes)
TCP: Hash tables configured (established 2048 bind 2048)
UDP hash table entries: 256 (order: 1, 8192 bytes)
UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
NET: Registered protocol family 1
RPC: Registered named UNIX socket transport module.
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
RPC: Registered tcp NFSv4.1 backchannel transport module.
PCI: CLS 0 bytes, default 64
Trying to unpack rootfs image as initramfs...
rootfs image is not initramfs (no cpio magic); looks like an initrd
Freeing initrd memory: 12584K (cceb7000 - cdb01000)
hw perfevents: enabled with armv7_cortex_a9 PMU driver, 7 counters available
futex hash table entries: 512 (order: 3, 32768 bytes)
workingset: timestamp_bits=28 max_order=16 bucket_order=0
jffs2: version 2.2. (NAND) (SUMMARY) © 2001-2006 Red Hat, Inc.
io scheduler noop registered
io scheduler deadline registered
io scheduler cfq registered (default)
dma-pl330 f8003000.ps7-dma: Loaded driver for PL330 DMAC-241330
dma-pl330 f8003000.ps7-dma: DBUFF-128x8bytes Num_Chans-8 Num_Peri-4 Num_Events-16
e0000000.serial: ttyPS0 at MMIO 0xe0000000 (irq = 158, base_baud = 6249999) is a xuartps
console [ttyPS0] enabled
xdevcfg f8007000.ps7-dev-cfg: ioremap 0xf8007000 to cf86e000
[drm] Initialized drm 1.1.0 20060810
brd: module loaded
loop: module loaded
CAN device driver interface
gpiod_set_value: invalid GPIO
libphy: MACB_mii_bus: probed
macb e000b000.ethernet eth0: Cadence GEM rev 0x00020118 at 0xe000b000 irq 31 (00:0a:35:00:00:00)
Generic PHY e000b000.etherne:00: attached PHY driver [Generic PHY] (mii_bus:phy_addr=e000b000.etherne:00, irq=-1)
e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k
e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci-pci: EHCI PCI platform driver
usbcore: registered new interface driver usb-storage
mousedev: PS/2 mouse device common for all mice
i2c /dev entries driver
Xilinx Zynq CpuIdle Driver started
sdhci: Secure Digital Host Controller Interface driver
sdhci: Copyright(c) Pierre Ossman
sdhci-pltfm: SDHCI platform and OF driver helper
mmc0: SDHCI controller on e0100000.ps7-sdio [e0100000.ps7-sdio] using ADMA
ledtrig-cpu: registered to indicate activity on CPUs
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
nand: device found, Manufacturer ID: 0x2c, Chip ID: 0xda
nand: Micron MT29F2G08ABAGAWP
nand: 256 MiB, SLC, erase size: 128 KiB, page size: 2048, OOB size: 128
nand: WARNING: pl35x-nand: the ECC used on your system is too weak compared to the one required by the NAND chip
Bad block table found at page 131008, version 0x01
Bad block table found at page 130944, version 0x01
6 ofpart partitions found on MTD device pl35x-nand
Creating 6 MTD partitions on "pl35x-nand":
0x000000000000-0x000002800000 : "BOOT.bin-env-dts-kernel"
0x000002800000-0x000004800000 : "ramfs"
0x000004800000-0x000005000000 : "configs"
0x000005000000-0x000006000000 : "reserve"
0x000006000000-0x000008000000 : "ramfs-bak"
0x000008000000-0x000010000000 : "reserve1"
NET: Registered protocol family 10
sit: IPv6 over IPv4 tunneling driver
NET: Registered protocol family 17
can: controller area network core (rev 20120528 abi 9)
NET: Registered protocol family 29
can: raw protocol (rev 20120528)
can: broadcast manager protocol (rev 20120528 t)
can: netlink gateway (rev 20130117) max_hops=1
zynq_pm_ioremap: no compatible node found for 'xlnx,zynq-ddrc-a05'
zynq_pm_late_init: Unable to map DDRC IO memory.
Registering SWP/SWPB emulation handler
hctosys: unable to open rtc device (rtc0)
ALSA device list:
No soundcards found.
RAMDISK: gzip image found at block 0
EXT4-fs (ram0): couldn't mount as ext3 due to feature incompatibilities
EXT4-fs (ram0): mounted filesystem without journal. Opts: (null)
VFS: Mounted root (ext4 filesystem) on device 1:0.
devtmpfs: mounted
Freeing unused kernel memory: 1024K (c0a00000 - c0b00000)
EXT4-fs (ram0): re-mounted. Opts: block_validity,delalloc,barrier,user_xattr
random: dd urandom read with 0 bits of entropy available
ubi0: attaching mtd2
ubi0: scanning is finished
ubi0: attached mtd2 (name "configs", size 8 MiB)
ubi0: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes
ubi0: min./max. I/O unit sizes: 2048/2048, sub-page size 2048
ubi0: VID header offset: 2048 (aligned 2048), data offset: 4096
ubi0: good PEBs: 64, bad PEBs: 0, corrupted PEBs: 0
ubi0: user volume: 1, internal volumes: 1, max. volumes count: 128
ubi0: max/mean erase counter: 42/19, WL threshold: 4096, image sequence number: 72543235
ubi0: available PEBs: 0, total reserved PEBs: 64, PEBs reserved for bad PEB handling: 40
ubi0: background thread "ubi_bgt0d" started, PID 708
UBIFS (ubi0:0): background thread "ubifs_bgt0_0" started, PID 711
UBIFS (ubi0:0): UBIFS: mounted UBI device 0, volume 0, name "configs"
UBIFS (ubi0:0): LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
UBIFS (ubi0:0): FS size: 1396736 bytes (1 MiB, 11 LEBs), journal size 888833 bytes (0 MiB, 5 LEBs)
UBIFS (ubi0:0): reserved for root: 65970 bytes (64 KiB)
UBIFS (ubi0:0): media format: w4/r0 (latest is w4/r0), UUID D94047F6-1175-4366-977B-837CC879EE19, small LPT model
ubi1: attaching mtd5
ubi1: scanning is finished
ubi1: attached mtd5 (name "reserve1", size 128 MiB)
ubi1: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes
ubi1: min./max. I/O unit sizes: 2048/2048, sub-page size 2048
ubi1: VID header offset: 2048 (aligned 2048), data offset: 4096
ubi1: good PEBs: 1020, bad PEBs: 4, corrupted PEBs: 0
ubi1: user volume: 1, internal volumes: 1, max. volumes count: 128
ubi1: max/mean erase counter: 1540/491, WL threshold: 4096, image sequence number: 3389548455
ubi1: available PEBs: 0, total reserved PEBs: 1020, PEBs reserved for bad PEB handling: 36
ubi1: background thread "ubi_bgt1d" started, PID 720
UBIFS (ubi1:0): background thread "ubifs_bgt1_0" started, PID 723
UBIFS (ubi1:0): UBIFS: mounted UBI device 1, volume 0, name "reserve1"
UBIFS (ubi1:0): LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
UBIFS (ubi1:0): FS size: 123039744 bytes (117 MiB, 969 LEBs), journal size 6221824 bytes (5 MiB, 49 LEBs)
UBIFS (ubi1:0): reserved for root: 4952683 bytes (4836 KiB)
UBIFS (ubi1:0): media format: w4/r0 (latest is w4/r0), UUID 721E72E7-F382-4130-AD9F-6C10D9102537, small LPT model
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
macb e000b000.ethernet eth0: unable to generate target frequency: 25000000 Hz
macb e000b000.ethernet eth0: link up (100/Full)
IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
In axi fpga driver!
request_mem_region OK!
AXI fpga dev virtual address is 0xcfb38000
*base_vir_addr = 0xab013
In fpga mem driver!
request_mem_region OK!
fpga mem virtual address is 0xd2000000
random: nonblocking pool is initialized
Sep 19 04:28:05 (none) local0.notice bmminer: set_start_time_point total_tv_start_sys=967 total_tv_end_sys=968
Sep 19 04:28:08 (none) local0.notice cgminer: cgminer_socket_init reg bitmain_api_detect return: 0
Sep 19 04:28:08 (none) local0.notice cgminer: cgminer_socket_init reg bitmain_update_job return: 0
Sep 19 04:28:09 (none) local0.notice cgminer: cgminer_socket_init reg bitmain_shutdown return: 0
Sep 19 04:28:09 (none) local0.err cgminer: Miner compile time: Thu Apr 23 16:29:07 CST 2020 type: Antminer T17
Sep 19 04:28:09 (none) local0.notice cgminer[3713]: about to send detect
Sep 19 04:28:09 (none) local0.notice cgminer[3713]: set_start_time_point total_tv_start_sys=971 total_tv_end_sys=972
Sep 19 04:28:09 (none) local0.notice cgminer[3713]: Probing for an alive pool
Sep 19 04:28:09 (none) local0.notice cgminer[3713]: LOW POWER MODE!
Sep 19 04:28:09 (none) local0.notice cgminer[3713]: Switching to pool 2 stratum+tcp://ss.antpool.com:25 - first alive pool
Sep 19 04:28:09 (none) local0.notice cgminer[3713]: in stratum_sthread
Sep 19 04:28:09 (none) local0.notice cgminer[3713]: Pool 2 difficulty changed to 65536
Sep 19 04:28:09 (none) local0.notice cgminer[3713]: LOW POWER MODE!
Sep 19 04:28:09 (none) local0.warn cgminer[3713]: Pool 0 stratum+tcp://ss.antpool.com:3333 alive, testing stability
Sep 19 04:28:09 (none) local0.notice cgminer[3713]: in stratum_sthread
Sep 19 04:28:09 (none) local0.notice cgminer[3713]: Pool 0 difficulty changed to 65536
Sep 19 04:28:09 (none) local0.notice cgminer[3713]: Network diff set to 32T
Sep 19 04:28:09 (none) local0.notice cgminer[3713]: LOW POWER MODE!
Sep 19 04:28:09 (none) local0.warn cgminer[3713]: Pool 1 stratum+tcp://ss.antpool.com:443 alive, testing stability
Sep 19 04:28:09 (none) local0.notice cgminer[3713]: in stratum_sthread
Sep 19 04:28:09 (none) local0.notice cgminer[3713]: Pool 1 difficulty changed to 65536
Sep 19 04:28:09 (none) local0.notice cgminer[3713]: POOL 2 support ab mode!
Sep 19 04:28:10 (none) local0.notice cgminer[3713]: POOL 0 support ab mode!
Sep 19 04:28:10 (none) local0.notice cgminer[3713]: POOL 1 support ab mode!
Sep 19 04:28:10 (none) local0.notice cgminer[3713]: update job
Sep 19 04:28:10 (none) local0.notice cgminer[3713]: job buf total len:2536, offset:2536
Sep 19 04:28:10 (none) local0.notice cgminer[3713]: about to send job, size is 2536
Sep 19 04:28:10 (none) local0.notice bmminer: bitmain_update_job_cb, rec job data 0xb4000528 size: 2536
Sep 19 04:28:10 (none) local0.notice bmminer: parse job buf len:2536
Sep 19 04:28:10 (none) local0.warn cgminer[3713]: Pool 0 stratum+tcp://ss.antpool.com:3333 stable for >120 seconds
Sep 19 04:28:10 (none) local0.warn cgminer[3713]: Switching to pool 0 stratum+tcp://ss.antpool.com:3333
Sep 19 04:28:12 (none) local0.notice cgminer[3713]: update job
Sep 19 04:28:12 (none) local0.notice cgminer[3713]: job buf total len:2536, offset:2536
Sep 19 04:28:12 (none) local0.notice cgminer[3713]: about to send job, size is 2536
Sep 19 04:28:12 (none) local0.notice bmminer: bitmain_update_job_cb, rec job data 0xb4000528 size: 2536
Sep 19 04:28:12 (none) local0.notice bmminer: parse job buf len:2536
Sep 19 04:28:15 (none) local0.warn cgminer[3713]: API running in IP access mode on port 4028 (14)
Sep 19 04:28:42 (none) local0.notice cgminer[3713]: update job
Sep 19 04:28:42 (none) local0.notice cgminer[3713]: job buf total len:2536, offset:2536
Sep 19 04:28:42 (none) local0.notice cgminer[3713]: about to send job, size is 2536
Sep 19 04:28:42 (none) local0.notice bmminer: bitmain_update_job_cb, rec job data 0xb4000528 size: 2536
Sep 19 04:28:42 (none) local0.notice bmminer: parse job buf len:2536
Sep 19 04:29:12 (none) local0.notice cgminer[3713]: update job
Sep 19 04:29:12 (none) local0.notice cgminer[3713]: job buf total len:2536, offset:2536
Sep 19 04:29:12 (none) local0.notice cgminer[3713]: about to send job, size is 2536
Sep 19 04:29:12 (none) local0.notice bmminer: bitmain_update_job_cb, rec job data 0xb4000528 size: 2536
Sep 19 04:29:12 (none) local0.notice bmminer: parse job buf len:2536
Sep 19 04:29:42 (none) local0.notice cgminer[3713]: update job
Sep 19 04:29:42 (none) local0.notice cgminer[3713]: job buf total len:2536, offset:2536
Sep 19 04:29:42 (none) local0.notice cgminer[3713]: about to send job, size is 2536
Sep 19 04:29:42 (none) local0.notice bmminer: bitmain_update_job_cb, rec job data 0xb4000528 size: 2536
Sep 19 04:29:42 (none) local0.notice bmminer: parse job buf len:2536
Sep 19 04:30:12 (none) local0.notice cgminer[3713]: Pool 0 difficulty changed to 16384
Sep 19 04:30:12 (none) local0.notice cgminer[3713]: update job
Sep 19 04:30:12 (none) local0.notice cgminer[3713]: job buf total len:2536, offset:2536
Sep 19 04:30:12 (none) local0.notice cgminer[3713]: about to send job, size is 2536
Sep 19 04:30:12 (none) local0.notice bmminer: bitmain_update_job_cb, rec job data 0xb4000528 size: 2536
Sep 19 04:30:12 (none) local0.notice bmminer: parse job buf len:2536
Sep 19 04:30:42 (none) local0.notice cgminer[3713]: update job
Sep 19 04:30:42 (none) local0.notice cgminer[3713]: job buf total len:2536, offset:2536
Sep 19 04:30:42 (none) local0.notice cgminer[3713]: about to send job, size is 2536
Sep 19 04:30:42 (none) local0.notice bmminer: bitmain_update_job_cb, rec job data 0xb4000528 size: 2536
Sep 19 04:30:42 (none) local0.notice bmminer: parse job buf len:2536
Sep 19 04:31:12 (none) local0.notice cgminer[3713]: update job
Sep 19 04:31:12 (none) local0.notice cgminer[3713]: job buf total len:2568, offset:2568
Sep 19 04:31:12 (none) local0.notice cgminer[3713]: about to send job, size is 2568
Sep 19 04:31:12 (none) local0.notice bmminer: bitmain_update_job_cb, rec job data 0xb4000528 size: 2568
Sep 19 04:31:12 (none) local0.notice bmminer: parse job buf len:2568
Sep 19 04:31:42 (none) local0.notice cgminer[3713]: update job
Sep 19 04:31:42 (none) local0.notice cgminer[3713]: job buf total len:2568, offset:2568
Sep 19 04:31:42 (none) local0.notice cgminer[3713]: about to send job, size is 2568
Sep 19 04:31:42 (none) local0.notice bmminer: bitmain_update_job_cb, rec job data 0xb4000528 size: 2568
Sep 19 04:31:42 (none) local0.notice bmminer: parse job buf len:2568
Sep 19 04:32:12 (none) local0.notice cgminer[3713]: update job
Sep 19 04:32:12 (none) local0.notice cgminer[3713]: job buf total len:2568, offset:2568
Sep 19 04:32:12 (none) local0.notice cgminer[3713]: about to send job, size is 2568
Sep 19 04:32:12 (none) local0.notice bmminer: bitmain_update_job_cb, rec job data 0xb4000528 size: 2568
Sep 19 04:32:12 (none) local0.notice bmminer: parse job buf len:2568
Sep 19 04:32:44 (none) local0.notice cgminer[3713]: update job
Sep 19 04:32:44 (none) local0.notice cgminer[3713]: job buf total len:2568, offset:2568
Sep 19 04:32:44 (none) local0.notice cgminer[3713]: about to send job, size is 2568
Sep 19 04:32:44 (none) local0.notice bmminer: bitmain_update_job_cb, rec job data 0xb4000528 size: 2568
Sep 19 04:32:44 (none) local0.notice bmminer: parse job buf len:2568
Sep 19 04:33:14 (none) local0.notice cgminer[3713]: update job
Sep 19 04:33:14 (none) local0.notice cgminer[3713]: job buf total len:2568, offset:2568
Sep 19 04:33:14 (none) local0.notice cgminer[3713]: about to send job, size is 2568
Sep 19 04:33:14 (none) local0.notice bmminer: bitmain_update_job_cb, rec job data 0xb4000528 size: 2568
Sep 19 04:33:14 (none) local0.notice bmminer: parse job buf len:2568
Sep 19 04:33:44 (none) local0.notice cgminer[3713]: update job
Sep 19 04:33:44 (none) local0.notice cgminer[3713]: job buf total len:2568, offset:2568
Sep 19 04:33:44 (none) local0.notice cgminer[3713]: about to send job, size is 2568
Sep 19 04:33:44 (none) local0.notice bmminer: bitmain_update_job_cb, rec job data 0xb4000528 size: 2568
Sep 19 04:33:44 (none) local0.notice bmminer: parse job buf len:2568
Sep 19 04:34:14 (none) local0.notice cgminer[3713]: update job
Sep 19 04:34:14 (none) local0.notice cgminer[3713]: job buf total len:2568, offset:2568
Sep 19 04:34:14 (none) local0.notice cgminer[3713]: about to send job, size is 2568
Sep 19 04:34:14 (none) local0.notice bmminer: bitmain_update_job_cb, rec job data 0xb4000528 size: 2568
Sep 19 04:34:14 (none) local0.notice bmminer: parse job buf len:2568
Sep 19 04:34:44 (none) local0.notice cgminer[3713]: update job
Sep 19 04:34:44 (none) local0.notice cgminer[3713]: job buf total len:2568, offset:2568
Sep 19 04:34:44 (none) local0.notice cgminer[3713]: about to send job, size is 2568
Sep 19 04:34:44 (none) local0.notice bmminer: bitmain_update_job_cb, rec job data 0xb4000528 size: 2568
Sep 19 04:34:44 (none) local0.notice bmminer: parse job buf len:2568
Sep 19 04:35:14 (none) local0.notice cgminer[3713]: update job
Sep 19 04:35:14 (none) local0.notice cgminer[3713]: job buf total len:2568, offset:2568
Sep 19 04:35:14 (none) local0.notice cgminer[3713]: about to send job, size is 2568
Sep 19 04:35:14 (none) local0.notice bmminer: bitmain_update_job_cb, rec job data 0xb4000528 size: 2568
Sep 19 04:35:14 (none) local0.notice bmminer: parse job buf len:2568
Sep 19 04:35:44 (none) local0.notice cgminer[3713]: update job
Sep 19 04:35:44 (none) local0.notice cgminer[3713]: job buf total len:2568, offset:2568
Sep 19 04:35:44 (none) local0.notice cgminer[3713]: about to send job, size is 2568
Sep 19 04:35:44 (none) local0.notice bmminer: bitmain_update_job_cb, rec job data 0xb4000528 size: 2568
Sep 19 04:35:44 (none) local0.notice bmminer: parse job buf len:2568
Sep 19 04:36:14 (none) local0.notice cgminer[3713]: update job
Sep 19 04:36:14 (none) local0.notice cgminer[3713]: job buf total len:2568, offset:2568
Sep 19 04:36:14 (none) local0.notice cgminer[3713]: about to send job, size is 2568
Sep 19 04:36:14 (none) local0.notice bmminer: bitmain_update_job_cb, rec job data 0xb4000528 size: 2568
Sep 19 04:36:14 (none) local0.notice bmminer: parse job buf len:2568
Sep 19 04:36:44 (none) local0.notice cgminer[3713]: update job
Sep 19 04:36:44 (none) local0.notice cgminer[3713]: job buf total len:2568, offset:2568
Sep 19 04:36:44 (none) local0.notice cgminer[3713]: about to send job, size is 2568
Sep 19 04:36:44 (none) local0.notice bmminer: bitmain_update_job_cb, rec job data 0xb4000528 size: 2568
Sep 19 04:36:44 (none) local0.notice bmminer: parse job buf len:2568
Sep 19 04:37:14 (none) local0.notice cgminer[3713]: update job
Sep 19 04:37:14 (none) local0.notice cgminer[3713]: job buf total len:2568, offset:2568
Sep 19 04:37:14 (none) local0.notice cgminer[3713]: about to send job, size is 2568
Sep 19 04:37:14 (none) local0.notice bmminer: bitmain_update_job_cb, rec job data 0xb4000528 size: 2568
Sep 19 04:37:14 (none) local0.notice bmminer: parse job buf len:2568
Sep 19 04:37:44 (none) local0.notice cgminer[3713]: update job
Sep 19 04:37:44 (none) local0.notice cgminer[3713]: job buf total len:2568, offset:2568
Sep 19 04:37:44 (none) local0.notice cgminer[3713]: about to send job, size is 2568
Sep 19 04:37:44 (none) local0.notice bmminer: bitmain_update_job_cb, rec job data 0xb4000528 size: 2568
Sep 19 04:37:44 (none) local0.notice bmminer: parse job buf len:2568
Sep 19 04:38:13 (none) local0.notice cgminer[3713]: Stratum connection to pool 0 interrupted
Sep 19 04:38:13 (none) local0.notice cgminer[3713]: update job
Sep 19 04:38:13 (none) local0.notice cgminer[3713]: LOW POWER MODE!
Sep 19 04:38:13 (none) local0.notice cgminer[3713]: Pool 0 difficulty changed to 65536
Sep 19 04:38:13 (none) local0.notice cgminer[3713]: Stratum from pool 0 requested work restart
Sep 19 04:38:13 (none) local0.notice cgminer[3713]: job buf total len:2564, offset:2564
Sep 19 04:38:13 (none) local0.notice cgminer[3713]: about to send job, size is 2564
Sep 19 04:38:13 (none) local0.notice bmminer: bitmain_update_job_cb, rec job data 0xb4000528 size: 2564
Sep 19 04:38:13 (none) local0.notice bmminer: parse job buf len:2564
Sep 19 04:38:13 (none) local0.notice cgminer[3713]: update job
Sep 19 04:38:13 (none) local0.notice cgminer[3713]: job buf total len:2564, offset:2564
Sep 19 04:38:13 (none) local0.notice cgminer[3713]: about to send job, size is 2564
Sep 19 04:38:13 (none) local0.notice bmminer: bitmain_update_job_cb, rec job data 0xb4000528 size: 2564
Sep 19 04:38:13 (none) local0.notice bmminer: parse job buf len:2564
Sep 19 04:38:13 (none) local0.notice cgminer[3713]: update job
Sep 19 04:38:13 (none) local0.notice cgminer[3713]: job buf total len:2564, offset:2564
Sep 19 04:38:13 (none) local0.notice cgminer[3713]: about to send job, size is 2564
Sep 19 04:38:13 (none) local0.notice bmminer: bitmain_update_job_cb, rec job data 0xb4000528 size: 2564
Sep 19 04:38:13 (none) local0.notice bmminer: parse job buf len:2564
Sep 19 04:38:13 (none) local0.notice cgminer[3713]: POOL 0 support ab mode!
Sep 19 04:38:44 (none) local0.notice cgminer[3713]: update job
Sep 19 04:38:44 (none) local0.notice cgminer[3713]: job buf total len:2564, offset:2564
Sep 19 04:38:44 (none) local0.notice cgminer[3713]: about to send job, size is 2564
Sep 19 04:38:44 (none) local0.notice bmminer: bitmain_update_job_cb, rec job data 0xb4000528 size: 2564
Sep 19 04:38:44 (none) local0.notice bmminer: parse job buf len:2564
Sep 19 04:39:14 (none) local0.notice cgminer[3713]: update job
Sep 19 04:39:14 (none) local0.notice cgminer[3713]: job buf total len:2564, offset:2564
Sep 19 04:39:14 (none) local0.notice cgminer[3713]: about to send job, size is 2564
Sep 19 04:39:14 (none) local0.notice bmminer: bitmain_update_job_cb, rec job data 0xb4000528 size: 2564
Sep 19 04:39:14 (none) local0.notice bmminer: parse job buf len:2564
Sep 19 04:39:44 (none) local0.notice cgminer[3713]: update job
Sep 19 04:39:44 (none) local0.notice cgminer[3713]: job buf total len:2564, offset:2564
Sep 19 04:39:44 (none) local0.notice cgminer[3713]: about to send job, size is 2564
Sep 19 04:39:44 (none) local0.notice bmminer: bitmain_update_job_cb, rec job data 0xb4000528 size: 2564
Sep 19 04:39:44 (none) local0.notice bmminer: parse job buf len:2564
Sep 19 04:40:13 (none) local0.notice cgminer[3713]: Pool 0 difficulty changed to 16384
Sep 19 04:40:14 (none) local0.notice cgminer[3713]: update job
Sep 19 04:40:14 (none) local0.notice cgminer[3713]: job buf total len:2564, offset:2564
Sep 19 04:40:14 (none) local0.notice cgminer[3713]: about to send job, size is 2564
Sep 19 04:40:14 (none) local0.notice bmminer: bitmain_update_job_cb, rec job data 0xb4000528 size: 2564
Sep 19 04:40:14 (none) local0.notice bmminer: parse job buf len:2564
Sep 19 04:40:44 (none) local0.notice cgminer[3713]: update job
Sep 19 04:40:44 (none) local0.notice cgminer[3713]: job buf total len:2564, offset:2564
Sep 19 04:40:44 (none) local0.notice cgminer[3713]: about to send job, size is 2564
Sep 19 04:40:44 (none) local0.notice bmminer: bitmain_update_job_cb, rec job data 0xb4000528 size: 2564
Sep 19 04:40:44 (none) local0.notice bmminer: parse job buf len:2564
Sep 19 04:41:15 (none) local0.notice cgminer[3713]: update job
Sep 19 04:41:15 (none) local0.notice cgminer[3713]: job buf total len:2564, offset:2564
Sep 19 04:41:15 (none) local0.notice cgminer[3713]: about to send job, size is 2564
Sep 19 04:41:15 (none) local0.notice bmminer: bitmain_update_job_cb, rec job data 0xb4000528 size: 2564
Sep 19 04:41:15 (none) local0.notice bmminer: parse job buf len:2564
Sep 19 04:41:45 (none) local0.notice cgminer[3713]: update job
Sep 19 04:41:45 (none) local0.notice cgminer[3713]: job buf total len:2564, offset:2564
Sep 19 04:41:45 (none) local0.notice cgminer[3713]: about to send job, size is 2564
Sep 19 04:41:45 (none) local0.notice bmminer: bitmain_update_job_cb, rec job data 0xb4000528 size: 2564
Sep 19 04:41:45 (none) local0.notice bmminer: parse job buf len:2564
Sep 19 04:42:15 (none) local0.notice cgminer[3713]: update job
Sep 19 04:42:15 (none) local0.notice cgminer[3713]: job buf total len:2564, offset:2564
Sep 19 04:42:15 (none) local0.notice cgminer[3713]: about to send job, size is 2564
Sep 19 04:42:15 (none) local0.notice bmminer: bitmain_update_job_cb, rec job data 0xb4000528 size: 2564
Sep 19 04:42:15 (none) local0.notice bmminer: parse job buf len:2564
Sep 19 04:42:45 (none) local0.notice cgminer[3713]: update job
Sep 19 04:42:45 (none) local0.notice cgminer[3713]: job buf total len:2564, offset:2564
Sep 19 04:42:45 (none) local0.notice cgminer[3713]: about to send job, size is 2564
Sep 19 04:42:45 (none) local0.notice bmminer: bitmain_update_job_cb, rec job data 0xb4000528 size: 2564
Sep 19 04:42:45 (none) local0.notice bmminer: parse job buf len:2564
Sep 19 04:43:15 (none) local0.notice cgminer[3713]: update job
Sep 19 04:43:15 (none) local0.notice cgminer[3713]: job buf total len:2564, offset:2564
Sep 19 04:43:15 (none) local0.notice cgminer[3713]: about to send job, size is 2564
Sep 19 04:43:15 (none) local0.notice bmminer: bitmain_update_job_cb, rec job data 0xb4000528 size: 2564
Sep 19 04:43:15 (none) local0.notice bmminer: parse job buf len:2564
Sep 19 04:43:45 (none) local0.notice cgminer[3713]: update job
Sep 19 04:43:45 (none) local0.notice cgminer[3713]: job buf total len:2564, offset:2564
Sep 19 04:43:45 (none) local0.notice cgminer[3713]: about to send job, size is 2564
Sep 19 04:43:45 (none) local0.notice bmminer: bitmain_update_job_cb, rec job data 0xb4000528 size: 2564
Sep 19 04:43:45 (none) local0.notice bmminer: parse job buf len:2564
Sep 19 04:44:15 (none) local0.notice cgminer[3713]: update job
Sep 19 04:44:15 (none) local0.notice cgminer[3713]: job buf total len:2564, offset:2564
Sep 19 04:44:15 (none) local0.notice cgminer[3713]: about to send job, size is 2564
Sep 19 04:44:15 (none) local0.notice bmminer: bitmain_update_job_cb, rec job data 0xb4000528 size: 2564
Sep 19 04:44:15 (none) local0.notice bmminer: parse job buf len:2564
Sep 19 04:44:45 (none) local0.notice cgminer[3713]: update job
Sep 19 04:44:45 (none) local0.notice cgminer[3713]: job buf total len:2564, offset:2564
Sep 19 04:44:45 (none) local0.notice cgminer[3713]: about to send job, size is 2564
Sep 19 04:44:45 (none) local0.notice bmminer: bitmain_update_job_cb, rec job data 0xb4000528 size: 2564
Sep 19 04:44:45 (none) local0.notice bmminer: parse job buf len:2564
Sep 19 04:45:15 (none) local0.notice cgminer[3713]: update job
Sep 19 04:45:15 (none) local0.notice cgminer[3713]: job buf total len:2564, offset:2564
Sep 19 04:45:15 (none) local0.notice cgminer[3713]: about to send job, size is 2564
Sep 19 04:45:15 (none) local0.notice bmminer: bitmain_update_job_cb, rec job data 0xb4000528 size: 2564
Sep 19 04:45:15 (none) local0.notice bmminer: parse job buf len:2564
Sep 19 04:45:45 (none) local0.notice cgminer[3713]: update job
Sep 19 04:45:45 (none) local0.notice cgminer[3713]: job buf total len:2564, offset:2564
Sep 19 04:45:45 (none) local0.notice cgminer[3713]: about to send job, size is 2564
Sep 19 04:45:45 (none) local0.notice bmminer: bitmain_update_job_cb, rec job data 0xb4000528 size: 2564
Sep 19 04:45:45 (none) local0.notice bmminer: parse job buf len:2564
Sep 19 04:46:15 (none) local0.notice cgminer[3713]: update job
Sep 19 04:46:15 (none) local0.notice cgminer[3713]: job buf total len:2564, offset:2564
Sep 19 04:46:15 (none) local0.notice cgminer[3713]: about to send job, size is 2564
Sep 19 04:46:15 (none) local0.notice bmminer: bitmain_update_job_cb, rec job data 0xb4000528 size: 2564
Sep 19 04:46:15 (none) local0.notice bmminer: parse job buf len:2564
Sep 19 04:46:45 (none) local0.notice cgminer[3713]: update job
Sep 19 04:46:45 (none) local0.notice cgminer[3713]: job buf total len:2564, offset:2564
Sep 19 04:46:45 (none) local0.notice cgminer[3713]: about to send job, size is 2564
Sep 19 04:46:45 (none) local0.notice bmminer: bitmain_update_job_cb, rec job data 0xb4000528 size: 2564
Sep 19 04:46:45 (none) local0.notice bmminer: parse job buf len:2564
2022-09-19 04:23:43 driver-btm-api.c:663:init_freq_mode: This is scan-user version
2022-09-19 04:23:43 driver-btm-api.c:2028:bitmain_soc_init: opt_multi_version = 1
2022-09-19 04:23:43 driver-btm-api.c:2029:bitmain_soc_init: opt_bitmain_ab = 1
2022-09-19 04:23:43 driver-btm-api.c:2030:bitmain_soc_init: opt_bitmain_work_mode = 0
2022-09-19 04:23:43 driver-btm-api.c:2031:bitmain_soc_init: Miner compile time: Thu Apr 23 16:29:07 CST 2020 type: Antminer T17
2022-09-19 04:23:43 driver-btm-api.c:2032:bitmain_soc_init: commit version: 1c5be6f 2020-04-20 16:18:14, build by: lol 2020-04-23 16:35:04
2022-09-19 04:23:43 driver-btm-api.c:1844:show_sn: no SN got, please write SN to /nvdata/sn
2022-09-19 04:23:43 driver-btm-api.c:1167:miner_device_init: Detect 256MB control board of XILINX
2022-09-19 04:23:43 driver-btm-api.c:1115:init_fan_parameter: fan_eft : 0 fan_pwm : 0
2022-09-19 04:23:43 thread.c:885:create_read_nonce_reg_thread: create thread
2022-09-19 04:23:49 driver-btm-api.c:1099:init_miner_version: miner ID : 806cd50618c0885c
2022-09-19 04:23:49 driver-btm-api.c:1105:init_miner_version: FPGA Version = 0xB013
2022-09-19 04:23:51 eeprom.c:431:check_pattern_test_level: L1 board
2022-09-19 04:23:53 eeprom.c:431:check_pattern_test_level: L1 board
2022-09-19 04:23:55 eeprom.c:431:check_pattern_test_level: L1 board
2022-09-19 04:23:55 driver-btm-api.c:737:get_product_id: product_id[0] = 1
2022-09-19 04:23:55 driver-btm-api.c:737:get_product_id: product_id[1] = 1
2022-09-19 04:23:55 driver-btm-api.c:737:get_product_id: product_id[2] = 1
2022-09-19 04:23:55 driver-btm-api.c:1666:get_ccdly_opt: ccdly_opt[0] = 1
2022-09-19 04:23:55 driver-btm-api.c:1666:get_ccdly_opt: ccdly_opt[1] = 1
2022-09-19 04:23:55 driver-btm-api.c:1666:get_ccdly_opt: ccdly_opt[2] = 1
2022-09-19 04:23:55 driver-btm-api.c:1919:bitmain_board_init: g_ccdly_opt = 1
2022-09-19 04:23:55 driver-btm-api.c:676:_set_project_type: project:2
2022-09-19 04:23:55 driver-btm-api.c:706:_set_project_type: Project type: Antminer T17
2022-09-19 04:23:55 driver-btm-api.c:717:dump_pcb_bom_version: Chain [0] PCB Version: 0x0100
2022-09-19 04:23:55 driver-btm-api.c:718:dump_pcb_bom_version: Chain [0] BOM Version: 0x0100
2022-09-19 04:23:55 driver-btm-api.c:717:dump_pcb_bom_version: Chain [1] PCB Version: 0x0100
2022-09-19 04:23:55 driver-btm-api.c:718:dump_pcb_bom_version: Chain [1] BOM Version: 0x0100
2022-09-19 04:23:55 driver-btm-api.c:717:dump_pcb_bom_version: Chain [2] PCB Version: 0x0100
2022-09-19 04:23:55 driver-btm-api.c:718:dump_pcb_bom_version: Chain [2] BOM Version: 0x0100
2022-09-19 04:23:56 driver-btm-api.c:1939:bitmain_board_init: Fan check passed.
2022-09-19 04:23:57 board.c:36:jump_and_app_check_restore_pic: chain[0] PIC jump to app
2022-09-19 04:24:01 board.c:40:jump_and_app_check_restore_pic: Check chain[0] PIC fw version=0xb9
2022-09-19 04:24:03 board.c:36:jump_and_app_check_restore_pic: chain[1] PIC jump to app
2022-09-19 04:24:06 board.c:40:jump_and_app_check_restore_pic: Check chain[1] PIC fw version=0xb9
2022-09-19 04:24:08 board.c:36:jump_and_app_check_restore_pic: chain[2] PIC jump to app
2022-09-19 04:24:11 board.c:40:jump_and_app_check_restore_pic: Check chain[2] PIC fw version=0xb9
2022-09-19 04:24:11 thread.c:880:create_pic_heart_beat_thread: create thread
2022-09-19 04:24:11 power_api.c:55:power_init: power init ...
2022-09-19 04:24:11 driver-btm-api.c:1949:bitmain_board_init: Enter 30s sleep to make sure power release finish.
2022-09-19 04:24:43 power_api.c:232:set_iic_power_to_highest_voltage: setting to voltage: 17.00 ...
2022-09-19 04:24:49 power_api.c:124:check_voltage_multi: retry time: 0
2022-09-19 04:24:51 power_api.c:86:get_average_voltage: chain[0], voltage is: 16.911855
2022-09-19 04:24:53 power_api.c:86:get_average_voltage: chain[1], voltage is: 16.740410
2022-09-19 04:24:54 power_api.c:86:get_average_voltage: chain[2], voltage is: 16.630195
2022-09-19 04:24:54 power_api.c:97:get_average_voltage: aveage voltage is: 16.760820
2022-09-19 04:24:54 power_api.c:182:set_iic_power_by_voltage: now set voltage to : 17.000000
2022-09-19 04:24:54 uart.c:80:set_baud: set fpga_baud = 115200, fpga_divider = 26
2022-09-19 04:25:06 driver-btm-api.c:1042:check_asic_number_with_power_on: Chain[0]: find 30 asic, times 0
2022-09-19 04:25:16 driver-btm-api.c:1042:check_asic_number_with_power_on: Chain[1]: find 12 asic, times 0
2022-09-19 04:25:26 driver-btm-api.c:1042:check_asic_number_with_power_on: Chain[1]: find 0 asic, times 1
2022-09-19 04:25:35 driver-btm-api.c:1042:check_asic_number_with_power_on: Chain[1]: find 0 asic, times 2
2022-09-19 04:25:35 driver-btm-api.c:1069:check_asic_number: Chain 1 only find 0 asic, will power off hash board 1
2022-09-19 04:25:47 driver-btm-api.c:1042:check_asic_number_with_power_on: Chain[2]: find 0 asic, times 0
2022-09-19 04:25:56 driver-btm-api.c:1042:check_asic_number_with_power_on: Chain[2]: find 0 asic, times 1
2022-09-19 04:26:07 driver-btm-api.c:1042:check_asic_number_with_power_on: Chain[2]: find 0 asic, times 2
2022-09-19 04:26:07 driver-btm-api.c:1069:check_asic_number: Chain 2 only find 0 asic, will power off hash board 2
2022-09-19 04:26:10 driver-btm-api.c:352:set_order_clock: chain[0]: set order clock, stragegy 3 clock_en=0x1
2022-09-19 04:26:11 driver-hash-chip.c:502:set_clock_delay_control: core_data = 0xb4
2022-09-19 04:26:11 uart.c:80:set_baud: set fpga_baud = 3000000, fpga_divider = 0
2022-09-19 04:26:11 driver-btm-api.c:1693:check_clock_counter: freq 50 clock_counter_limit 6
2022-09-19 04:26:11 uart.c:80:set_baud: set fpga_baud = 115200, fpga_divider = 26
2022-09-19 04:26:11 voltage[0] = 1710
2022-09-19 04:26:11 power_api.c:140:set_working_voltage: working_voltage = 17.100000
2022-09-19 04:26:12 temperature.c:282:calibrate_temp_sensor_one_chain: Temperature sensor calibration: chain 0 success.
2022-09-19 04:26:12 uart.c:80:set_baud: set fpga_baud = 6000000, fpga_divider = 3
2022-09-19 04:26:13 driver-btm-api.c:252:check_bringup_temp: Bring up temperature is 32
2022-09-19 04:26:13 thread.c:900:create_check_miner_status_thread: create thread
2022-09-19 04:26:13 thread.c:890:create_set_miner_status_thread: create thread
2022-09-19 04:26:13 driver-btm-api.c:613:calculate_timeout: dev->timeout = 392
2022-09-19 04:26:13 thread.c:875:create_temperature_monitor_thread: create thread
2022-09-19 04:26:13 freq_tuning.c:159:freq_tuning_get_max_freq: Max freq of tuning is 760
2022-09-19 04:26:13 power_api.c:379:slowly_set_iic_power_to_custom_voltage: slowly setting to voltage: 18.10 ...
2022-09-19 04:26:45 power_api.c:124:check_voltage_multi: retry time: 0
2022-09-19 04:26:47 power_api.c:86:get_average_voltage: chain[0], voltage is: 18.142588
2022-09-19 04:26:47 power_api.c:97:get_average_voltage: aveage voltage is: 18.142588
2022-09-19 04:27:30 driver-btm-api.c:644:set_timeout: freq 670 final timeout=175
2022-09-19 04:27:30 power_api.c:397:slowly_set_iic_power_to_working_voltage: slowly setting to voltage: 17.10 ...
2022-09-19 04:27:52 thread.c:734:check_temperature: over max temp, pcb temp 59 (max 80), chip temp 104(max 103)
2022-09-19 04:27:52 driver-btm-api.c:205:set_miner_status: ERROR_TEMP_TOO_HIGH
2022-09-19 04:27:52 driver-btm-api.c:146:stop_mining: stop mining: over max temp
2022-09-19 04:27:52 thread.c:920:cancel_temperature_monitor_thread: cancel thread
2022-09-19 04:27:52 thread.c:930:cancel_read_nonce_reg_thread: cancel thread
2022-09-19 04:27:52 driver-btm-api.c:131:killall_hashboard: ****power off hashboard****
2022-09-19 04:27:56 power_api.c:124:check_voltage_multi: retry time: 0
2022-09-19 04:27:57 power_api.c:86:get_average_voltage: chain[0], voltage is: 17.266992
2022-09-19 04:27:57 power_api.c:97:get_average_voltage: aveage voltage is: 17.266992
2022-09-19 04:27:57 frequency.c:654:get_current_min_freq: current min freq 670
2022-09-19 04:27:57 driver-btm-api.c:1693:check_clock_counter: freq 670 clock_counter_limit 85
2022-09-19 04:28:00 register.c:1416:quick_dump_core_hash_clock_counter: bad clock counter. chain = 0, asic = 5, core = 0, found 0, clock counter 0x00000000
2022-09-19 04:28:00 driver-btm-api.c:2139:bitmain_soc_init: clock count check failed after retry, wait for hash rate protect later.
2022-09-19 04:28:00 thread.c:895:create_check_system_status_thread: create thread
2022-09-19 04:28:01 driver-btm-api.c:2155:bitmain_soc_init: Init done!
2022-09-19 04:28:01 driver-btm-api.c:205:set_miner_status: STATUS_INIT
2022-09-19 04:28:05 driver-btm-api.c:205:set_miner_status: STATUS_OKAY
2022-09-19 04:28:10 driver-btm-api.c:1325:dhash_chip_send_job: Version num 4
2022-09-19 04:38:13 driver-btm-api.c:1325:dhash_chip_send_job: Version num 1
2022-09-19 04:38:44 driver-btm-api.c:1325:dhash_chip_send_job: Version num 4
0

Comment actions Permalink

Please sign in to leave a comment.

Comments

Didn't find what you were looking for?