Wrong temp sensor type, chain = 2

Follow

Arve Noraas Hamre

• April 14, 2020 17:08

Hi

I have a Antminer T17 who wont hash. It finds ASIC's, but gives this error:

2020-04-14 15:15:05 temperature.c:203:is_temp_sensor_type_correct: Wrong temp sensor type, chain = 2, sensor = 6, type = 0x0, retry.

Any idea if theres anyway to fix this?

If needed I can send complete kernel log.

Thanx in advance for reply.

3

• Official comment

  

  Nick

  • July 05, 2021 02:25

  Dear

  Please download the SD card file in the below link

  https://service.bitmain.com/support/download?product=Flashing%20SD%20card%20with%20image

   

  Comment actions Permalink
• 

  Luke HAO-Technical Specialist

  • April 15, 2020 08:20

  Hi Arve

  Leave me an Email please，I will send you the SD card recovery image to try to recover it first. thank you.

  1

  Comment actions Permalink
• 

  Tschrock

  • September 02, 2020 00:32

  Same problem on S17Pro.  Could you also send me the firmware? tschrock@schrockinnovations.com

  1

  Comment actions Permalink
• 

  Rafael Dao

  • April 14, 2020 23:41

  Hello.

  I am having exactly the same problem with my S17e, is there a solution? I am thinking it could be a problem with the hashboard.

  Thanks in advance for your response.

  0

  Comment actions Permalink
• 

  Luke HAO-Technical Specialist

  • April 15, 2020 06:56

  Hey Guys

  Please send me the complete kernel log,thank you very much!

  0

  Comment actions Permalink
• 

  Arve Noraas Hamre

  • April 15, 2020 08:11

   

  Booting Linux on physical CPU 0x0
  Linux version 4.6.0-xilinx-gff8137b-dirty (lzq@armdev2) (gcc version 4.8.3 20140320 (prerelease) (Sourcery CodeBench Lite 2014.05-23) ) #25 SMP PREEMPT Fri Nov 23 15:30:52 CST 2018
  CPU: ARMv7 Processor [413fc090] revision 0 (ARMv7), cr=18c5387d
  CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
  Machine model: Xilinx Zynq
  cma: Reserved 16 MiB at 0x0e000000
  Memory policy: Data cache writealloc
  On node 0 totalpages: 61440
  free_area_init_node: node 0, pgdat c0b39280, node_mem_map cde10000
  Normal zone: 480 pages used for memmap
  Normal zone: 0 pages reserved
  Normal zone: 61440 pages, LIFO batch:15
  percpu: Embedded 12 pages/cpu @cddf1000 s19776 r8192 d21184 u49152
  pcpu-alloc: s19776 r8192 d21184 u49152 alloc=12*4096
  pcpu-alloc: [0] 0 [0] 1
  Built 1 zonelists in Zone order, mobility grouping on. Total pages: 60960
  Kernel command line: mem=240M console=ttyPS0,115200 ramdisk_size=33554432 root=/dev/ram rw earlyprintk
  PID hash table entries: 1024 (order: 0, 4096 bytes)
  Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
  Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
  Memory: 203756K/245760K available (6345K kernel code, 231K rwdata, 1896K rodata, 1024K init, 223K bss, 25620K reserved, 16384K cma-reserved, 0K highmem)
  Virtual kernel memory layout:
  vector : 0xffff0000 - 0xffff1000 ( 4 kB)
  fixmap : 0xffc00000 - 0xfff00000 (3072 kB)
  vmalloc : 0xcf800000 - 0xff800000 ( 768 MB)
  lowmem : 0xc0000000 - 0xcf000000 ( 240 MB)
  pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
  modules : 0xbf000000 - 0xbfe00000 ( 14 MB)
  .text : 0xc0008000 - 0xc090c424 (9234 kB)
  .init : 0xc0a00000 - 0xc0b00000 (1024 kB)
  .data : 0xc0b00000 - 0xc0b39fe0 ( 232 kB)
  .bss : 0xc0b39fe0 - 0xc0b71c28 ( 224 kB)
  Preemptible hierarchical RCU implementation.
  Build-time adjustment of leaf fanout to 32.
  RCU restricting CPUs from NR_CPUS=4 to nr_cpu_ids=2.
  RCU: Adjusting geometry for rcu_fanout_leaf=32, nr_cpu_ids=2
  NR_IRQS:16 nr_irqs:16 16
  efuse mapped to cf800000
  ps7-slcr mapped to cf802000
  L2C: platform modifies aux control register: 0x72360000 -> 0x72760000
  L2C: DT/platform modifies aux control register: 0x72360000 -> 0x72760000
  L2C-310 erratum 769419 enabled
  L2C-310 enabling early BRESP for Cortex-A9
  L2C-310 full line of zeros enabled for Cortex-A9
  L2C-310 ID prefetch enabled, offset 1 lines
  L2C-310 dynamic clock gating enabled, standby mode enabled
  L2C-310 cache controller enabled, 8 ways, 512 kB
  L2C-310: CACHE_ID 0x410000c8, AUX_CTRL 0x76760001
  zynq_clock_init: clkc starts at cf802100
  Zynq clock init
  sched_clock: 64 bits at 333MHz, resolution 3ns, wraps every 4398046511103ns
  clocksource: arm_global_timer: mask: 0xffffffffffffffff max_cycles: 0x4ce07af025, max_idle_ns: 440795209040 ns
  Switching to timer-based delay loop, resolution 3ns
  clocksource: ttc_clocksource: mask: 0xffff max_cycles: 0xffff, max_idle_ns: 537538477 ns
  ps7-ttc #0 at cf80a000, irq=18
  Console: colour dummy device 80x30
  Calibrating delay loop (skipped), value calculated using timer frequency.. 666.66 BogoMIPS (lpj=3333333)
  pid_max: default: 32768 minimum: 301
  Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
  Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
  CPU: Testing write buffer coherency: ok
  CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
  Setting up static identity map for 0x100000 - 0x100058
  CPU1: failed to boot: -1
  Brought up 1 CPUs
  SMP: Total of 1 processors activated (666.66 BogoMIPS).
  CPU: All CPU(s) started in SVC mode.
  devtmpfs: initialized
  VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 4
  clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
  pinctrl core: initialized pinctrl subsystem
  NET: Registered protocol family 16
  DMA: preallocated 256 KiB pool for atomic coherent allocations
  cpuidle: using governor menu
  hw-breakpoint: found 5 (+1 reserved) breakpoint and 1 watchpoint registers.
  hw-breakpoint: maximum watchpoint size is 4 bytes.
  zynq-ocm f800c000.ps7-ocmc: ZYNQ OCM pool: 256 KiB @ 0xcf880000
  vgaarb: loaded
  SCSI subsystem initialized
  usbcore: registered new interface driver usbfs
  usbcore: registered new interface driver hub
  usbcore: registered new device driver usb
  media: Linux media interface: v0.10
  Linux video capture interface: v2.00
  pps_core: LinuxPPS API ver. 1 registered
  pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
  PTP clock support registered
  EDAC MC: Ver: 3.0.0
  Advanced Linux Sound Architecture Driver Initialized.
  clocksource: Switched to clocksource arm_global_timer
  NET: Registered protocol family 2
  TCP established hash table entries: 2048 (order: 1, 8192 bytes)
  TCP bind hash table entries: 2048 (order: 2, 16384 bytes)
  TCP: Hash tables configured (established 2048 bind 2048)
  UDP hash table entries: 256 (order: 1, 8192 bytes)
  UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
  NET: Registered protocol family 1
  RPC: Registered named UNIX socket transport module.
  RPC: Registered udp transport module.
  RPC: Registered tcp transport module.
  RPC: Registered tcp NFSv4.1 backchannel transport module.
  PCI: CLS 0 bytes, default 64
  Trying to unpack rootfs image as initramfs...
  rootfs image is not initramfs (no cpio magic); looks like an initrd
  Freeing initrd memory: 12580K (cceb8000 - cdb01000)
  hw perfevents: enabled with armv7_cortex_a9 PMU driver, 7 counters available
  futex hash table entries: 512 (order: 3, 32768 bytes)
  workingset: timestamp_bits=28 max_order=16 bucket_order=0
  jffs2: version 2.2. (NAND) (SUMMARY) © 2001-2006 Red Hat, Inc.
  io scheduler noop registered
  io scheduler deadline registered
  io scheduler cfq registered (default)
  dma-pl330 f8003000.ps7-dma: Loaded driver for PL330 DMAC-241330
  dma-pl330 f8003000.ps7-dma: DBUFF-128x8bytes Num_Chans-8 Num_Peri-4 Num_Events-16
  e0000000.serial: ttyPS0 at MMIO 0xe0000000 (irq = 158, base_baud = 6249999) is a xuartps
  console [ttyPS0] enabled
  xdevcfg f8007000.ps7-dev-cfg: ioremap 0xf8007000 to cf86e000
  [drm] Initialized drm 1.1.0 20060810
  brd: module loaded
  loop: module loaded
  CAN device driver interface
  gpiod_set_value: invalid GPIO
  libphy: MACB_mii_bus: probed
  macb e000b000.ethernet eth0: Cadence GEM rev 0x00020118 at 0xe000b000 irq 31 (00:0a:35:00:00:00)
  Generic PHY e000b000.etherne:00: attached PHY driver [Generic PHY] (mii_bus:phy_addr=e000b000.etherne:00, irq=-1)
  e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k
  e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
  ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
  ehci-pci: EHCI PCI platform driver
  usbcore: registered new interface driver usb-storage
  mousedev: PS/2 mouse device common for all mice
  i2c /dev entries driver
  Xilinx Zynq CpuIdle Driver started
  sdhci: Secure Digital Host Controller Interface driver
  sdhci: Copyright(c) Pierre Ossman
  sdhci-pltfm: SDHCI platform and OF driver helper
  mmc0: SDHCI controller on e0100000.ps7-sdio [e0100000.ps7-sdio] using ADMA
  ledtrig-cpu: registered to indicate activity on CPUs
  usbcore: registered new interface driver usbhid
  usbhid: USB HID core driver
  nand: device found, Manufacturer ID: 0x2c, Chip ID: 0xda
  nand: Micron MT29F2G08ABAGAWP
  nand: 256 MiB, SLC, erase size: 128 KiB, page size: 2048, OOB size: 128
  nand: WARNING: pl35x-nand: the ECC used on your system is too weak compared to the one required by the NAND chip
  Bad block table found at page 131008, version 0x01
  Bad block table found at page 130944, version 0x01
  6 ofpart partitions found on MTD device pl35x-nand
  Creating 6 MTD partitions on "pl35x-nand":
  0x000000000000-0x000002800000 : "BOOT.bin-env-dts-kernel"
  0x000002800000-0x000004800000 : "ramfs"
  0x000004800000-0x000005000000 : "configs"
  0x000005000000-0x000006000000 : "reserve"
  0x000006000000-0x000008000000 : "ramfs-bak"
  0x000008000000-0x000010000000 : "reserve1"
  NET: Registered protocol family 10
  sit: IPv6 over IPv4 tunneling driver
  NET: Registered protocol family 17
  can: controller area network core (rev 20120528 abi 9)
  NET: Registered protocol family 29
  can: raw protocol (rev 20120528)
  can: broadcast manager protocol (rev 20120528 t)
  can: netlink gateway (rev 20130117) max_hops=1
  zynq_pm_ioremap: no compatible node found for 'xlnx,zynq-ddrc-a05'
  zynq_pm_late_init: Unable to map DDRC IO memory.
  Registering SWP/SWPB emulation handler
  hctosys: unable to open rtc device (rtc0)
  ALSA device list:
  No soundcards found.
  RAMDISK: gzip image found at block 0
  EXT4-fs (ram0): couldn't mount as ext3 due to feature incompatibilities
  EXT4-fs (ram0): mounted filesystem without journal. Opts: (null)
  VFS: Mounted root (ext4 filesystem) on device 1:0.
  devtmpfs: mounted
  Freeing unused kernel memory: 1024K (c0a00000 - c0b00000)
  EXT4-fs (ram0): re-mounted. Opts: block_validity,delalloc,barrier,user_xattr
  random: dd urandom read with 0 bits of entropy available
  ubi0: attaching mtd2
  ubi0: scanning is finished
  ubi0: attached mtd2 (name "configs", size 8 MiB)
  ubi0: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes
  ubi0: min./max. I/O unit sizes: 2048/2048, sub-page size 2048
  ubi0: VID header offset: 2048 (aligned 2048), data offset: 4096
  ubi0: good PEBs: 64, bad PEBs: 0, corrupted PEBs: 0
  ubi0: user volume: 1, internal volumes: 1, max. volumes count: 128
  ubi0: max/mean erase counter: 21/9, WL threshold: 4096, image sequence number: 238976237
  ubi0: available PEBs: 0, total reserved PEBs: 64, PEBs reserved for bad PEB handling: 40
  ubi0: background thread "ubi_bgt0d" started, PID 708
  UBIFS (ubi0:0): background thread "ubifs_bgt0_0" started, PID 711
  UBIFS (ubi0:0): UBIFS: mounted UBI device 0, volume 0, name "configs"
  UBIFS (ubi0:0): LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
  UBIFS (ubi0:0): FS size: 1396736 bytes (1 MiB, 11 LEBs), journal size 888833 bytes (0 MiB, 5 LEBs)
  UBIFS (ubi0:0): reserved for root: 65970 bytes (64 KiB)
  UBIFS (ubi0:0): media format: w4/r0 (latest is w4/r0), UUID D6C5CFD6-B153-4B17-92AC-44A49D283FC9, small LPT model
  ubi1: attaching mtd5
  ubi1: scanning is finished
  ubi1: attached mtd5 (name "reserve1", size 128 MiB)
  ubi1: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes
  ubi1: min./max. I/O unit sizes: 2048/2048, sub-page size 2048
  ubi1: VID header offset: 2048 (aligned 2048), data offset: 4096
  ubi1: good PEBs: 1020, bad PEBs: 4, corrupted PEBs: 0
  ubi1: user volume: 1, internal volumes: 1, max. volumes count: 128
  ubi1: max/mean erase counter: 937/190, WL threshold: 4096, image sequence number: 1008233104
  ubi1: available PEBs: 0, total reserved PEBs: 1020, PEBs reserved for bad PEB handling: 36
  ubi1: background thread "ubi_bgt1d" started, PID 720
  UBIFS (ubi1:0): background thread "ubifs_bgt1_0" started, PID 723
  UBIFS (ubi1:0): UBIFS: mounted UBI device 1, volume 0, name "reserve1"
  UBIFS (ubi1:0): LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
  UBIFS (ubi1:0): FS size: 123039744 bytes (117 MiB, 969 LEBs), journal size 6221824 bytes (5 MiB, 49 LEBs)
  UBIFS (ubi1:0): reserved for root: 4952683 bytes (4836 KiB)
  UBIFS (ubi1:0): media format: w4/r0 (latest is w4/r0), UUID 4FE1EDCC-9B56-4A9A-8F71-6015FE264C7F, small LPT model
  IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
  IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
  macb e000b000.ethernet eth0: unable to generate target frequency: 25000000 Hz
  macb e000b000.ethernet eth0: link up (100/Full)
  IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
  In axi fpga driver!
  request_mem_region OK!
  AXI fpga dev virtual address is 0xcfb38000
  *base_vir_addr = 0xab013
  In fpga mem driver!
  request_mem_region OK!
  fpga mem virtual address is 0xd2000000
  random: nonblocking pool is initialized
  2020-04-14 15:13:39 driver-btm-api.c:631:init_freq_mode: This is scan-user version
  2020-04-14 15:13:39 driver-btm-api.c:1994:bitmain_soc_init: opt_multi_version = 1
  2020-04-14 15:13:39 driver-btm-api.c:1995:bitmain_soc_init: opt_bitmain_ab = 1
  2020-04-14 15:13:39 driver-btm-api.c:1996:bitmain_soc_init: opt_bitmain_work_mode = 0
  2020-04-14 15:13:39 driver-btm-api.c:1997:bitmain_soc_init: Miner compile time: Tue Dec 24 16:13:07 CST 2019 type: Antminer T17
  2020-04-14 15:13:39 driver-btm-api.c:1998:bitmain_soc_init: commit version: e93a09b 2019-12-24 16:03:45, build by: lol 2019-12-24 16:19:49
  2020-04-14 15:13:39 driver-btm-api.c:1810:show_sn: no SN got, please write SN to /nvdata/sn
  2020-04-14 15:13:39 driver-btm-api.c:1135:miner_device_init: Detect 256MB control board of XILINX
  2020-04-14 15:13:39 driver-btm-api.c:1083:init_fan_parameter: fan_eft : 0 fan_pwm : 0
  2020-04-14 15:13:39 thread.c:789:create_read_nonce_reg_thread: create thread
  2020-04-14 15:13:45 driver-btm-api.c:1067:init_miner_version: miner ID : 8072b44815408854
  2020-04-14 15:13:45 driver-btm-api.c:1073:init_miner_version: FPGA Version = 0xB013
  2020-04-14 15:13:47 eeprom.c:431:check_pattern_test_level: L1 board
  2020-04-14 15:13:49 eeprom.c:431:check_pattern_test_level: L1 board
  2020-04-14 15:13:49 driver-btm-api.c:705:get_product_id: product_id[0] = 1
  2020-04-14 15:13:49 driver-btm-api.c:705:get_product_id: product_id[2] = 1
  2020-04-14 15:13:49 driver-btm-api.c:1633:get_ccdly_opt: ccdly_opt[0] = 1
  2020-04-14 15:13:49 driver-btm-api.c:1633:get_ccdly_opt: ccdly_opt[2] = 1
  2020-04-14 15:13:49 driver-btm-api.c:1877:bitmain_board_init: g_ccdly_opt = 1
  2020-04-14 15:13:49 driver-btm-api.c:644:_set_project_type: project:2
  2020-04-14 15:13:49 driver-btm-api.c:674:_set_project_type: Project type: Antminer T17
  2020-04-14 15:13:49 driver-btm-api.c:685:dump_pcb_bom_version: Chain [0] PCB Version: 0x0100
  2020-04-14 15:13:49 driver-btm-api.c:686:dump_pcb_bom_version: Chain [0] BOM Version: 0x0100
  2020-04-14 15:13:49 driver-btm-api.c:685:dump_pcb_bom_version: Chain [2] PCB Version: 0x0100
  2020-04-14 15:13:49 driver-btm-api.c:686:dump_pcb_bom_version: Chain [2] BOM Version: 0x0100
  2020-04-14 15:13:52 driver-btm-api.c:1897:bitmain_board_init: Fan check passed.
  2020-04-14 15:13:54 board.c:36:jump_and_app_check_restore_pic: chain[0] PIC jump to app
  2020-04-14 15:13:57 board.c:40:jump_and_app_check_restore_pic: Check chain[0] PIC fw version=0xb9
  2020-04-14 15:13:59 board.c:36:jump_and_app_check_restore_pic: chain[2] PIC jump to app
  2020-04-14 15:14:02 board.c:40:jump_and_app_check_restore_pic: Check chain[2] PIC fw version=0xb9
  2020-04-14 15:14:02 thread.c:784:create_pic_heart_beat_thread: create thread
  2020-04-14 15:14:02 power_api.c:55:power_init: power init ...
  2020-04-14 15:14:02 driver-btm-api.c:1907:bitmain_board_init: Enter 30s sleep to make sure power release finish.
  2020-04-14 15:14:34 power_api.c:232:set_iic_power_to_highest_voltage: setting to voltage: 17.00 ...
  2020-04-14 15:14:36 power_api.c:124:check_voltage_multi: retry time: 0
  2020-04-14 15:14:38 power_api.c:86:get_average_voltage: chain[0], voltage is: 17.230254
  2020-04-14 15:14:40 power_api.c:86:get_average_voltage: chain[2], voltage is: 17.297607
  2020-04-14 15:14:40 power_api.c:97:get_average_voltage: aveage voltage is: 17.263930
  2020-04-14 15:14:40 power_api.c:182:set_iic_power_by_voltage: now set voltage to : 17.000000
  2020-04-14 15:14:40 driver-hash-chip.c:233:dhash_chip_set_baud_v2: chain[0]: chip baud = 115200, chip_divider = 26
  2020-04-14 15:14:40 driver-hash-chip.c:233:dhash_chip_set_baud_v2: chain[2]: chip baud = 115200, chip_divider = 26
  2020-04-14 15:14:40 uart.c:80:set_baud: set fpga_baud = 115200, fpga_divider = 26
  2020-04-14 15:14:50 driver-btm-api.c:1010:check_asic_number_with_power_on: Chain[0]: find 30 asic, times 0
  2020-04-14 15:15:00 driver-btm-api.c:1010:check_asic_number_with_power_on: Chain[2]: find 30 asic, times 0
  2020-04-14 15:15:02 driver-btm-api.c:348:set_order_clock: chain[0]: set order clock, stragegy 3 clock_en=0x1
  2020-04-14 15:15:02 driver-btm-api.c:348:set_order_clock: chain[2]: set order clock, stragegy 3 clock_en=0x1
  2020-04-14 15:15:02 driver-hash-chip.c:490:set_clock_delay_control: core_data = 0xb4
  2020-04-14 15:15:02 driver-hash-chip.c:233:dhash_chip_set_baud_v2: chain[0]: chip baud = 3000000, chip_divider = 0
  2020-04-14 15:15:02 driver-hash-chip.c:233:dhash_chip_set_baud_v2: chain[2]: chip baud = 3000000, chip_divider = 0
  2020-04-14 15:15:02 uart.c:80:set_baud: set fpga_baud = 3000000, fpga_divider = 0
  2020-04-14 15:15:02 driver-btm-api.c:1660:check_clock_counter: freq 50 clock_counter_limit 6
  2020-04-14 15:15:03 driver-hash-chip.c:233:dhash_chip_set_baud_v2: chain[0]: chip baud = 115200, chip_divider = 26
  2020-04-14 15:15:03 driver-hash-chip.c:233:dhash_chip_set_baud_v2: chain[2]: chip baud = 115200, chip_divider = 26
  2020-04-14 15:15:03 uart.c:80:set_baud: set fpga_baud = 115200, fpga_divider = 26
  2020-04-14 15:15:03 voltage[0] = 1690
  2020-04-14 15:15:03 voltage[2] = 1690
  2020-04-14 15:15:03 power_api.c:140:set_working_voltage: working_voltage = 16.900000
  2020-04-14 15:15:04 temperature.c:282:calibrate_temp_sensor_one_chain: Temperature sensor calibration: chain 0 success.
  2020-04-14 15:15:05 temperature.c:203:is_temp_sensor_type_correct: Wrong temp sensor type, chain = 2, sensor = 6, type = 0x0, retry.
  2020-04-14 15:15:05 temperature.c:203:is_temp_sensor_type_correct: Wrong temp sensor type, chain = 2, sensor = 6, type = 0x0, retry.
  2020-04-14 15:15:06 temperature.c:203:is_temp_sensor_type_correct: Wrong temp sensor type, chain = 2, sensor = 6, type = 0x0, retry.
  2020-04-14 15:15:06 temperature.c:203:is_temp_sensor_type_correct: Wrong temp sensor type, chain = 2, sensor = 6, type = 0x0, retry.
  2020-04-14 15:15:06 driver-btm-api.c:201:set_miner_status: ERROR_TEMP_LOST
  2020-04-14 15:15:06 driver-btm-api.c:142:stop_mining: stop mining: Can't get temperature sensor type!
  2020-04-14 15:15:06 thread.c:834:cancel_read_nonce_reg_thread: cancel thread
  2020-04-14 15:15:06 driver-btm-api.c:128:killall_hashboard: ****power off hashboard****

  0

  Comment actions Permalink
• 

  Arve Noraas Hamre

  • April 15, 2020 08:13

  I have disconnected one of the boards becouce of no ASIC's.

  Arve

  0

  Comment actions Permalink
• 

  Arve Noraas Hamre

  • April 15, 2020 10:02

  Thanx, my email is arvehamre@hotmail.com

  0

  Comment actions Permalink
• 

  Luke HAO-Technical Specialist

  • April 15, 2020 10:12

  Hi Arve

  Sent！

  0

  Comment actions Permalink
• 

  Arve Noraas Hamre

  • April 16, 2020 20:14

  That magic FW did it, my miner is back in business.

  Thank you Luke.  :-)

  0

  Comment actions Permalink
• 

  Luke HAO-Technical Specialist

  • April 17, 2020 08:50

  You are welcome : )

  0

  Comment actions Permalink
• 

  Masoud Neyrizi

  • May 12, 2020 04:43

  Hi

  I've faced with this problem too.

  Could you please send me the firmware?

  thanks

  neirizi@gmail.com

  0

  Comment actions Permalink
• 

  Fitzy2012

  • May 15, 2020 02:15

  hi guys I have the s17+ 70th with the exact same kernel logs to put me a chain down can I have a firmware sent please that will fix this? fitzy2012@me.com

  0

  Comment actions Permalink
• 

  Julio Salom

  • May 19, 2020 13:58

   

  good morning friend I have a t17 of 40Th and it gives me the same failure "2020-05-19 13:50:01 temperature.c: 189: is_temp_sensor_type_correct: Wrong temp sensor type, chain = 1, sensor = 6, type = 0x0 , retry. " please help, i also send the kernel log

  Booting Linux on physical CPU 0x0
  Linux version 4.6.0-xilinx-gff8137b-dirty (lzq@armdev2) (gcc version 4.8.3 20140320 (prerelease) (Sourcery CodeBench Lite 2014.05-23) ) #25 SMP PREEMPT Fri Nov 23 15:30:52 CST 2018
  CPU: ARMv7 Processor [413fc090] revision 0 (ARMv7), cr=18c5387d
  CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
  Machine model: Xilinx Zynq
  cma: Reserved 16 MiB at 0x0e000000
  Memory policy: Data cache writealloc
  On node 0 totalpages: 61440
  free_area_init_node: node 0, pgdat c0b39280, node_mem_map cde10000
  Normal zone: 480 pages used for memmap
  Normal zone: 0 pages reserved
  Normal zone: 61440 pages, LIFO batch:15
  percpu: Embedded 12 pages/cpu @cddf1000 s19776 r8192 d21184 u49152
  pcpu-alloc: s19776 r8192 d21184 u49152 alloc=12*4096
  pcpu-alloc: [0] 0 [0] 1
  Built 1 zonelists in Zone order, mobility grouping on. Total pages: 60960
  Kernel command line: mem=240M console=ttyPS0,115200 ramdisk_size=33554432 root=/dev/ram rw earlyprintk
  PID hash table entries: 1024 (order: 0, 4096 bytes)
  Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
  Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
  Memory: 195068K/245760K available (6345K kernel code, 231K rwdata, 1896K rodata, 1024K init, 223K bss, 34308K reserved, 16384K cma-reserved, 0K highmem)
  Virtual kernel memory layout:
  vector : 0xffff0000 - 0xffff1000 ( 4 kB)
  fixmap : 0xffc00000 - 0xfff00000 (3072 kB)
  vmalloc : 0xcf800000 - 0xff800000 ( 768 MB)
  lowmem : 0xc0000000 - 0xcf000000 ( 240 MB)
  pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
  modules : 0xbf000000 - 0xbfe00000 ( 14 MB)
  .text : 0xc0008000 - 0xc090c424 (9234 kB)
  .init : 0xc0a00000 - 0xc0b00000 (1024 kB)
  .data : 0xc0b00000 - 0xc0b39fe0 ( 232 kB)
  .bss : 0xc0b39fe0 - 0xc0b71c28 ( 224 kB)
  Preemptible hierarchical RCU implementation.
  Build-time adjustment of leaf fanout to 32.
  RCU restricting CPUs from NR_CPUS=4 to nr_cpu_ids=2.
  RCU: Adjusting geometry for rcu_fanout_leaf=32, nr_cpu_ids=2
  NR_IRQS:16 nr_irqs:16 16
  efuse mapped to cf800000
  ps7-slcr mapped to cf802000
  L2C: platform modifies aux control register: 0x72360000 -> 0x72760000
  L2C: DT/platform modifies aux control register: 0x72360000 -> 0x72760000
  L2C-310 erratum 769419 enabled
  L2C-310 enabling early BRESP for Cortex-A9
  L2C-310 full line of zeros enabled for Cortex-A9
  L2C-310 ID prefetch enabled, offset 1 lines
  L2C-310 dynamic clock gating enabled, standby mode enabled
  L2C-310 cache controller enabled, 8 ways, 512 kB
  L2C-310: CACHE_ID 0x410000c8, AUX_CTRL 0x76760001
  zynq_clock_init: clkc starts at cf802100
  Zynq clock init
  sched_clock: 64 bits at 333MHz, resolution 3ns, wraps every 4398046511103ns
  clocksource: arm_global_timer: mask: 0xffffffffffffffff max_cycles: 0x4ce07af025, max_idle_ns: 440795209040 ns
  Switching to timer-based delay loop, resolution 3ns
  clocksource: ttc_clocksource: mask: 0xffff max_cycles: 0xffff, max_idle_ns: 537538477 ns
  ps7-ttc #0 at cf80a000, irq=18
  Console: colour dummy device 80x30
  Calibrating delay loop (skipped), value calculated using timer frequency.. 666.66 BogoMIPS (lpj=3333333)
  pid_max: default: 32768 minimum: 301
  Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
  Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
  CPU: Testing write buffer coherency: ok
  CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
  Setting up static identity map for 0x100000 - 0x100058
  CPU1: failed to boot: -1
  Brought up 1 CPUs
  SMP: Total of 1 processors activated (666.66 BogoMIPS).
  CPU: All CPU(s) started in SVC mode.
  devtmpfs: initialized
  VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 4
  clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
  pinctrl core: initialized pinctrl subsystem
  NET: Registered protocol family 16
  DMA: preallocated 256 KiB pool for atomic coherent allocations
  cpuidle: using governor menu
  hw-breakpoint: found 5 (+1 reserved) breakpoint and 1 watchpoint registers.
  hw-breakpoint: maximum watchpoint size is 4 bytes.
  zynq-ocm f800c000.ps7-ocmc: ZYNQ OCM pool: 256 KiB @ 0xcf880000
  vgaarb: loaded
  SCSI subsystem initialized
  usbcore: registered new interface driver usbfs
  usbcore: registered new interface driver hub
  usbcore: registered new device driver usb
  media: Linux media interface: v0.10
  Linux video capture interface: v2.00
  pps_core: LinuxPPS API ver. 1 registered
  pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
  PTP clock support registered
  EDAC MC: Ver: 3.0.0
  Advanced Linux Sound Architecture Driver Initialized.
  clocksource: Switched to clocksource arm_global_timer
  NET: Registered protocol family 2
  TCP established hash table entries: 2048 (order: 1, 8192 bytes)
  TCP bind hash table entries: 2048 (order: 2, 16384 bytes)
  TCP: Hash tables configured (established 2048 bind 2048)
  UDP hash table entries: 256 (order: 1, 8192 bytes)
  UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
  NET: Registered protocol family 1
  RPC: Registered named UNIX socket transport module.
  RPC: Registered udp transport module.
  RPC: Registered tcp transport module.
  RPC: Registered tcp NFSv4.1 backchannel transport module.
  PCI: CLS 0 bytes, default 64
  Trying to unpack rootfs image as initramfs...
  rootfs image is not initramfs (no cpio magic); looks like an initrd
  Freeing initrd memory: 21268K (cc63c000 - cdb01000)
  hw perfevents: enabled with armv7_cortex_a9 PMU driver, 7 counters available
  futex hash table entries: 512 (order: 3, 32768 bytes)
  workingset: timestamp_bits=28 max_order=16 bucket_order=0
  jffs2: version 2.2. (NAND) (SUMMARY) © 2001-2006 Red Hat, Inc.
  io scheduler noop registered
  io scheduler deadline registered
  io scheduler cfq registered (default)
  dma-pl330 f8003000.ps7-dma: Loaded driver for PL330 DMAC-241330
  dma-pl330 f8003000.ps7-dma: DBUFF-128x8bytes Num_Chans-8 Num_Peri-4 Num_Events-16
  e0000000.serial: ttyPS0 at MMIO 0xe0000000 (irq = 158, base_baud = 6249999) is a xuartps
  console [ttyPS0] enabled
  xdevcfg f8007000.ps7-dev-cfg: ioremap 0xf8007000 to cf86e000
  [drm] Initialized drm 1.1.0 20060810
  brd: module loaded
  loop: module loaded
  CAN device driver interface
  gpiod_set_value: invalid GPIO
  libphy: MACB_mii_bus: probed
  macb e000b000.ethernet eth0: Cadence GEM rev 0x00020118 at 0xe000b000 irq 31 (00:0a:35:00:00:00)
  Generic PHY e000b000.etherne:00: attached PHY driver [Generic PHY] (mii_bus:phy_addr=e000b000.etherne:00, irq=-1)
  e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k
  e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
  ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
  ehci-pci: EHCI PCI platform driver
  usbcore: registered new interface driver usb-storage
  mousedev: PS/2 mouse device common for all mice
  i2c /dev entries driver
  Xilinx Zynq CpuIdle Driver started
  sdhci: Secure Digital Host Controller Interface driver
  sdhci: Copyright(c) Pierre Ossman
  sdhci-pltfm: SDHCI platform and OF driver helper
  mmc0: SDHCI controller on e0100000.ps7-sdio [e0100000.ps7-sdio] using ADMA
  ledtrig-cpu: registered to indicate activity on CPUs
  usbcore: registered new interface driver usbhid
  usbhid: USB HID core driver
  nand: device found, Manufacturer ID: 0x2c, Chip ID: 0xda
  nand: Micron MT29F2G08ABAGAWP
  nand: 256 MiB, SLC, erase size: 128 KiB, page size: 2048, OOB size: 128
  nand: WARNING: pl35x-nand: the ECC used on your system is too weak compared to the one required by the NAND chip
  Bad block table found at page 131008, version 0x01
  Bad block table found at page 130944, version 0x01
  6 ofpart partitions found on MTD device pl35x-nand
  Creating 6 MTD partitions on "pl35x-nand":
  0x000000000000-0x000002800000 : "BOOT.bin-env-dts-kernel"
  0x000002800000-0x000004800000 : "ramfs"
  0x000004800000-0x000005000000 : "configs"
  0x000005000000-0x000006000000 : "reserve"
  0x000006000000-0x000008000000 : "ramfs-bak"
  0x000008000000-0x000010000000 : "reserve1"
  NET: Registered protocol family 10
  sit: IPv6 over IPv4 tunneling driver
  NET: Registered protocol family 17
  can: controller area network core (rev 20120528 abi 9)
  NET: Registered protocol family 29
  can: raw protocol (rev 20120528)
  can: broadcast manager protocol (rev 20120528 t)
  can: netlink gateway (rev 20130117) max_hops=1
  zynq_pm_ioremap: no compatible node found for 'xlnx,zynq-ddrc-a05'
  zynq_pm_late_init: Unable to map DDRC IO memory.
  Registering SWP/SWPB emulation handler
  hctosys: unable to open rtc device (rtc0)
  ALSA device list:
  No soundcards found.
  RAMDISK: gzip image found at block 0
  EXT4-fs (ram0): couldn't mount as ext3 due to feature incompatibilities
  EXT4-fs (ram0): mounted filesystem without journal. Opts: (null)
  VFS: Mounted root (ext4 filesystem) on device 1:0.
  devtmpfs: mounted
  Freeing unused kernel memory: 1024K (c0a00000 - c0b00000)
  EXT4-fs (ram0): re-mounted. Opts: block_validity,delalloc,barrier,user_xattr
  random: dd urandom read with 0 bits of entropy available
  ubi0: attaching mtd2
  ubi0: scanning is finished
  ubi0: attached mtd2 (name "configs", size 8 MiB)
  ubi0: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes
  ubi0: min./max. I/O unit sizes: 2048/2048, sub-page size 2048
  ubi0: VID header offset: 2048 (aligned 2048), data offset: 4096
  ubi0: good PEBs: 64, bad PEBs: 0, corrupted PEBs: 0
  ubi0: user volume: 1, internal volumes: 1, max. volumes count: 128
  ubi0: max/mean erase counter: 15/6, WL threshold: 4096, image sequence number: 1937097882
  ubi0: available PEBs: 0, total reserved PEBs: 64, PEBs reserved for bad PEB handling: 40
  ubi0: background thread "ubi_bgt0d" started, PID 708
  UBIFS (ubi0:0): background thread "ubifs_bgt0_0" started, PID 711
  UBIFS (ubi0:0): recovery needed
  UBIFS (ubi0:0): recovery completed
  UBIFS (ubi0:0): UBIFS: mounted UBI device 0, volume 0, name "configs"
  UBIFS (ubi0:0): LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
  UBIFS (ubi0:0): FS size: 1396736 bytes (1 MiB, 11 LEBs), journal size 888833 bytes (0 MiB, 5 LEBs)
  UBIFS (ubi0:0): reserved for root: 65970 bytes (64 KiB)
  UBIFS (ubi0:0): media format: w4/r0 (latest is w4/r0), UUID 5AA08F96-C8F4-46A5-B493-B9818DF2D89A, small LPT model
  ubi1: attaching mtd5
  ubi1: scanning is finished
  ubi1: attached mtd5 (name "reserve1", size 128 MiB)
  ubi1: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes
  ubi1: min./max. I/O unit sizes: 2048/2048, sub-page size 2048
  ubi1: VID header offset: 2048 (aligned 2048), data offset: 4096
  ubi1: good PEBs: 1020, bad PEBs: 4, corrupted PEBs: 0
  ubi1: user volume: 1, internal volumes: 1, max. volumes count: 128
  ubi1: max/mean erase counter: 1014/176, WL threshold: 4096, image sequence number: 2918029247
  ubi1: available PEBs: 0, total reserved PEBs: 1020, PEBs reserved for bad PEB handling: 36
  ubi1: background thread "ubi_bgt1d" started, PID 720
  UBIFS (ubi1:0): background thread "ubifs_bgt1_0" started, PID 723
  UBIFS (ubi1:0): recovery needed
  UBIFS (ubi1:0): recovery completed
  UBIFS (ubi1:0): UBIFS: mounted UBI device 1, volume 0, name "reserve1"
  UBIFS (ubi1:0): LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
  UBIFS (ubi1:0): FS size: 123039744 bytes (117 MiB, 969 LEBs), journal size 6221824 bytes (5 MiB, 49 LEBs)
  UBIFS (ubi1:0): reserved for root: 4952683 bytes (4836 KiB)
  UBIFS (ubi1:0): media format: w4/r0 (latest is w4/r0), UUID A4C2A4DF-8087-4B61-934F-3E52785B752C, small LPT model
  IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
  IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
  macb e000b000.ethernet eth0: unable to generate target frequency: 25000000 Hz
  macb e000b000.ethernet eth0: link up (100/Full)
  IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
  In axi fpga driver!
  request_mem_region OK!
  AXI fpga dev virtual address is 0xcfb38000
  *base_vir_addr = 0xab013
  In fpga mem driver!
  request_mem_region OK!
  fpga mem virtual address is 0xd2000000
  2020-05-19 13:47:53 driver-btm-api.c:782:init_freq_mode: This is scan-user version
  2020-05-19 13:47:53 driver-btm-api.c:2082:bitmain_soc_init: opt_multi_version = 1
  2020-05-19 13:47:53 driver-btm-api.c:2083:bitmain_soc_init: opt_bitmain_ab = 1
  2020-05-19 13:47:53 driver-btm-api.c:2084:bitmain_soc_init: opt_bitmain_work_mode = 0
  2020-05-19 13:47:53 driver-btm-api.c:2085:bitmain_soc_init: Miner compile time: Mon Jul 29 00:19:06 CST 2019 type: Antminer T17
  2020-05-19 13:47:53 driver-btm-api.c:2086:bitmain_soc_init: commit version: e33ca6d 2019-07-18 12:39:03, build by: lol 2019-07-29 00:27:27
  2020-05-19 13:47:53 driver-btm-api.c:1937:show_sn: no SN got, please write SN to /nvdata/sn
  2020-05-19 13:47:53 driver-btm-api.c:1271:miner_device_init: Detect 256MB control board of XILINX
  2020-05-19 13:47:53 driver-btm-api.c:1219:init_fan_parameter: fan_eft : 0 fan_pwm : 0
  2020-05-19 13:47:53 thread.c:745:create_read_nonce_reg_thread: create thread
  2020-05-19 13:47:59 driver-btm-api.c:1203:init_miner_version: miner ID : 804c2c481540885c
  2020-05-19 13:47:59 driver-btm-api.c:1209:init_miner_version: FPGA Version = 0xB013
  2020-05-19 13:48:01 eeprom.c:425:check_pattern_test_level: invalid pattern test result. ignore
  2020-05-19 13:48:03 eeprom.c:425:check_pattern_test_level: invalid pattern test result. ignore
  2020-05-19 13:48:04 eeprom.c:425:check_pattern_test_level: invalid pattern test result. ignore
  2020-05-19 13:48:04 driver-btm-api.c:849:get_product_id: product_id[0] = 1
  2020-05-19 13:48:04 driver-btm-api.c:849:get_product_id: product_id[1] = 1
  2020-05-19 13:48:04 driver-btm-api.c:849:get_product_id: product_id[2] = 1
  2020-05-19 13:48:04 driver-btm-api.c:1760:get_ccdly_opt: ccdly_opt[0] = 1
  2020-05-19 13:48:04 driver-btm-api.c:1760:get_ccdly_opt: ccdly_opt[1] = 1
  2020-05-19 13:48:04 driver-btm-api.c:1760:get_ccdly_opt: ccdly_opt[2] = 1
  2020-05-19 13:48:04 driver-btm-api.c:1995:bitmain_board_init: g_ccdly_opt = 1
  2020-05-19 13:48:04 driver-btm-api.c:795:_set_project_type: project:2
  2020-05-19 13:48:04 driver-btm-api.c:825:_set_project_type: Project type: Antminer T17
  2020-05-19 13:48:04 driver-btm-api.c:836:dump_pcb_bom_version: Chain [0] PCB Version: 0x0100
  2020-05-19 13:48:04 driver-btm-api.c:837:dump_pcb_bom_version: Chain [0] BOM Version: 0x0100
  2020-05-19 13:48:04 driver-btm-api.c:836:dump_pcb_bom_version: Chain [1] PCB Version: 0x0100
  2020-05-19 13:48:04 driver-btm-api.c:837:dump_pcb_bom_version: Chain [1] BOM Version: 0x0100
  2020-05-19 13:48:04 driver-btm-api.c:836:dump_pcb_bom_version: Chain [2] PCB Version: 0x0100
  2020-05-19 13:48:04 driver-btm-api.c:837:dump_pcb_bom_version: Chain [2] BOM Version: 0x0100
  2020-05-19 13:48:05 driver-btm-api.c:2015:bitmain_board_init: Fan check passed.
  2020-05-19 13:48:07 board.c:36:jump_and_app_check_restore_pic: chain[0] PIC jump to app
  2020-05-19 13:48:11 board.c:40:jump_and_app_check_restore_pic: Check chain[0] PIC fw version=0xb9
  2020-05-19 13:48:12 board.c:36:jump_and_app_check_restore_pic: chain[1] PIC jump to app
  2020-05-19 13:48:16 board.c:40:jump_and_app_check_restore_pic: Check chain[1] PIC fw version=0xb9
  2020-05-19 13:48:18 board.c:36:jump_and_app_check_restore_pic: chain[2] PIC jump to app
  2020-05-19 13:48:21 board.c:40:jump_and_app_check_restore_pic: Check chain[2] PIC fw version=0xb9
  2020-05-19 13:48:21 thread.c:740:create_pic_heart_beat_thread: create thread
  2020-05-19 13:48:21 power_api.c:55:power_init: power init ...
  2020-05-19 13:48:21 driver-btm-api.c:2025:bitmain_board_init: Enter 30s sleep to make sure power release finish.
  2020-05-19 13:48:53 power_api.c:231:set_iic_power_to_highest_voltage: setting to voltage: 17.00 ...
  2020-05-19 13:48:59 power_api.c:123:check_voltage_multi: retry time: 0
  2020-05-19 13:49:01 power_api.c:85:get_average_voltage: chain[0], voltage is: 16.911855
  2020-05-19 13:49:02 power_api.c:85:get_average_voltage: chain[1], voltage is: 16.917978
  2020-05-19 13:49:04 power_api.c:85:get_average_voltage: chain[2], voltage is: 16.905732
  2020-05-19 13:49:04 power_api.c:96:get_average_voltage: aveage voltage is: 16.911855
  2020-05-19 13:49:04 power_api.c:181:set_iic_power_by_voltage: now set voltage to : 17.000000
  2020-05-19 13:49:04 driver-hash-chip.c:233:dhash_chip_set_baud_v2: chain[0]: chip baud = 115200, chip_divider = 26
  2020-05-19 13:49:04 driver-hash-chip.c:233:dhash_chip_set_baud_v2: chain[1]: chip baud = 115200, chip_divider = 26
  2020-05-19 13:49:04 driver-hash-chip.c:233:dhash_chip_set_baud_v2: chain[2]: chip baud = 115200, chip_divider = 26
  2020-05-19 13:49:04 uart.c:80:set_baud: set fpga_baud = 115200, fpga_divider = 26
  2020-05-19 13:49:16 driver-btm-api.c:1146:check_asic_number_with_power_on: Chain[0]: find 28 asic, times 0
  2020-05-19 13:49:26 driver-btm-api.c:1146:check_asic_number_with_power_on: Chain[0]: find 28 asic, times 1
  2020-05-19 13:49:36 driver-btm-api.c:1146:check_asic_number_with_power_on: Chain[0]: find 28 asic, times 2
  2020-05-19 13:49:36 driver-btm-api.c:1173:check_asic_number: Chain 0 only find 28 asic, will power off hash board 0
  2020-05-19 13:49:48 driver-btm-api.c:1146:check_asic_number_with_power_on: Chain[1]: find 30 asic, times 0
  2020-05-19 13:49:57 driver-btm-api.c:1146:check_asic_number_with_power_on: Chain[2]: find 30 asic, times 0
  2020-05-19 13:50:00 driver-btm-api.c:339:set_order_clock: chain[1]: set order clock, stragegy 3 clock_en=0x1
  2020-05-19 13:50:00 driver-btm-api.c:339:set_order_clock: chain[2]: set order clock, stragegy 3 clock_en=0x1
  2020-05-19 13:50:00 driver-hash-chip.c:490:set_clock_delay_control: core_data = 0xb4
  2020-05-19 13:50:00 driver-hash-chip.c:233:dhash_chip_set_baud_v2: chain[1]: chip baud = 3000000, chip_divider = 0
  2020-05-19 13:50:00 driver-hash-chip.c:233:dhash_chip_set_baud_v2: chain[2]: chip baud = 3000000, chip_divider = 0
  2020-05-19 13:50:00 uart.c:80:set_baud: set fpga_baud = 3000000, fpga_divider = 0
  2020-05-19 13:50:00 driver-btm-api.c:1787:check_clock_counter: freq 50 clock_counter_limit 6
  2020-05-19 13:50:01 driver-hash-chip.c:233:dhash_chip_set_baud_v2: chain[1]: chip baud = 115200, chip_divider = 26
  2020-05-19 13:50:01 driver-hash-chip.c:233:dhash_chip_set_baud_v2: chain[2]: chip baud = 115200, chip_divider = 26
  2020-05-19 13:50:01 uart.c:80:set_baud: set fpga_baud = 115200, fpga_divider = 26
  2020-05-19 13:50:01 voltage[1] = 1690
  2020-05-19 13:50:01 voltage[2] = 1690
  2020-05-19 13:50:01 power_api.c:139:set_working_voltage: working_voltage = 16.900000
  2020-05-19 13:50:01 temperature.c:189:is_temp_sensor_type_correct: Wrong temp sensor type, chain = 1, sensor = 6, type = 0x0, retry.
  2020-05-19 13:50:02 temperature.c:189:is_temp_sensor_type_correct: Wrong temp sensor type, chain = 1, sensor = 6, type = 0x0, retry.
  2020-05-19 13:50:02 temperature.c:189:is_temp_sensor_type_correct: Wrong temp sensor type, chain = 1, sensor = 6, type = 0x0, retry.
  2020-05-19 13:50:03 temperature.c:189:is_temp_sensor_type_correct: Wrong temp sensor type, chain = 1, sensor = 6, type = 0x0, retry.
  2020-05-19 13:50:03 driver-btm-api.c:197:set_miner_status: ERROR_TEMP_LOST
  2020-05-19 13:50:03 driver-btm-api.c:138:stop_mining: stop mining: Can't get temperature sensor type!
  2020-05-19 13:50:03 thread.c:790:cancel_read_nonce_reg_thread: cancel thread
  2020-05-19 13:50:03 driver-btm-api.c:124:killall_hashboard: ****power off hashboard****

  0

  Comment actions Permalink
• 

  Eugene

  • June 04, 2020 12:27

  Hi Luke

  I've faced with same problem too.

  Could you please send me the firmware?

  thanks

  sheshaxgod@gmail.com

  0

  Comment actions Permalink
• 

  Albert Gasratyan

  • July 26, 2020 23:10

  Hello, have a same problen on T17 (42 th). Can you please send the SD card recovery image?  Thanks

  e-mail: 5188311@gmail.com

  Booting Linux on physical CPU 0x0
  Linux version 4.6.0-xilinx-gff8137b-dirty (lzq@armdev2) (gcc version 4.8.3 20140320 (prerelease) (Sourcery CodeBench Lite 2014.05-23) ) #25 SMP PREEMPT Fri Nov 23 15:30:52 CST 2018
  CPU: ARMv7 Processor [413fc090] revision 0 (ARMv7), cr=18c5387d
  CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
  Machine model: Xilinx Zynq
  cma: Reserved 16 MiB at 0x0e000000
  Memory policy: Data cache writealloc
  On node 0 totalpages: 61440
  free_area_init_node: node 0, pgdat c0b39280, node_mem_map cde10000
  Normal zone: 480 pages used for memmap
  Normal zone: 0 pages reserved
  Normal zone: 61440 pages, LIFO batch:15
  percpu: Embedded 12 pages/cpu @cddf1000 s19776 r8192 d21184 u49152
  pcpu-alloc: s19776 r8192 d21184 u49152 alloc=12*4096
  pcpu-alloc: [0] 0 [0] 1
  Built 1 zonelists in Zone order, mobility grouping on. Total pages: 60960
  Kernel command line: mem=240M console=ttyPS0,115200 ramdisk_size=33554432 root=/dev/ram rw earlyprintk
  PID hash table entries: 1024 (order: 0, 4096 bytes)
  Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
  Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
  Memory: 193068K/245760K available (6345K kernel code, 231K rwdata, 1896K rodata, 1024K init, 223K bss, 36308K reserved, 16384K cma-reserved, 0K highmem)
  Virtual kernel memory layout:
  vector : 0xffff0000 - 0xffff1000 ( 4 kB)
  fixmap : 0xffc00000 - 0xfff00000 (3072 kB)
  vmalloc : 0xcf800000 - 0xff800000 ( 768 MB)
  lowmem : 0xc0000000 - 0xcf000000 ( 240 MB)
  pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
  modules : 0xbf000000 - 0xbfe00000 ( 14 MB)
  .text : 0xc0008000 - 0xc090c424 (9234 kB)
  .init : 0xc0a00000 - 0xc0b00000 (1024 kB)
  .data : 0xc0b00000 - 0xc0b39fe0 ( 232 kB)
  .bss : 0xc0b39fe0 - 0xc0b71c28 ( 224 kB)
  Preemptible hierarchical RCU implementation.
  Build-time adjustment of leaf fanout to 32.
  RCU restricting CPUs from NR_CPUS=4 to nr_cpu_ids=2.
  RCU: Adjusting geometry for rcu_fanout_leaf=32, nr_cpu_ids=2
  NR_IRQS:16 nr_irqs:16 16
  efuse mapped to cf800000
  ps7-slcr mapped to cf802000
  L2C: platform modifies aux control register: 0x72360000 -> 0x72760000
  L2C: DT/platform modifies aux control register: 0x72360000 -> 0x72760000
  L2C-310 erratum 769419 enabled
  L2C-310 enabling early BRESP for Cortex-A9
  L2C-310 full line of zeros enabled for Cortex-A9
  L2C-310 ID prefetch enabled, offset 1 lines
  L2C-310 dynamic clock gating enabled, standby mode enabled
  L2C-310 cache controller enabled, 8 ways, 512 kB
  L2C-310: CACHE_ID 0x410000c8, AUX_CTRL 0x76760001
  zynq_clock_init: clkc starts at cf802100
  Zynq clock init
  sched_clock: 64 bits at 333MHz, resolution 3ns, wraps every 4398046511103ns
  clocksource: arm_global_timer: mask: 0xffffffffffffffff max_cycles: 0x4ce07af025, max_idle_ns: 440795209040 ns
  Switching to timer-based delay loop, resolution 3ns
  clocksource: ttc_clocksource: mask: 0xffff max_cycles: 0xffff, max_idle_ns: 537538477 ns
  ps7-ttc #0 at cf80a000, irq=18
  Console: colour dummy device 80x30
  Calibrating delay loop (skipped), value calculated using timer frequency.. 666.66 BogoMIPS (lpj=3333333)
  pid_max: default: 32768 minimum: 301
  Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
  Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
  CPU: Testing write buffer coherency: ok
  CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
  Setting up static identity map for 0x100000 - 0x100058
  CPU1: failed to boot: -1
  Brought up 1 CPUs
  SMP: Total of 1 processors activated (666.66 BogoMIPS).
  CPU: All CPU(s) started in SVC mode.
  devtmpfs: initialized
  VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 4
  clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
  pinctrl core: initialized pinctrl subsystem
  NET: Registered protocol family 16
  DMA: preallocated 256 KiB pool for atomic coherent allocations
  cpuidle: using governor menu
  hw-breakpoint: found 5 (+1 reserved) breakpoint and 1 watchpoint registers.
  hw-breakpoint: maximum watchpoint size is 4 bytes.
  zynq-ocm f800c000.ps7-ocmc: ZYNQ OCM pool: 256 KiB @ 0xcf880000
  vgaarb: loaded
  SCSI subsystem initialized
  usbcore: registered new interface driver usbfs
  usbcore: registered new interface driver hub
  usbcore: registered new device driver usb
  media: Linux media interface: v0.10
  Linux video capture interface: v2.00
  pps_core: LinuxPPS API ver. 1 registered
  pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
  PTP clock support registered
  EDAC MC: Ver: 3.0.0
  Advanced Linux Sound Architecture Driver Initialized.
  clocksource: Switched to clocksource arm_global_timer
  NET: Registered protocol family 2
  TCP established hash table entries: 2048 (order: 1, 8192 bytes)
  TCP bind hash table entries: 2048 (order: 2, 16384 bytes)
  TCP: Hash tables configured (established 2048 bind 2048)
  UDP hash table entries: 256 (order: 1, 8192 bytes)
  UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
  NET: Registered protocol family 1
  RPC: Registered named UNIX socket transport module.
  RPC: Registered udp transport module.
  RPC: Registered tcp transport module.
  RPC: Registered tcp NFSv4.1 backchannel transport module.
  PCI: CLS 0 bytes, default 64
  Trying to unpack rootfs image as initramfs...
  rootfs image is not initramfs (no cpio magic); looks like an initrd
  Freeing initrd memory: 23268K (cc448000 - cdb01000)
  hw perfevents: enabled with armv7_cortex_a9 PMU driver, 7 counters available
  futex hash table entries: 512 (order: 3, 32768 bytes)
  workingset: timestamp_bits=28 max_order=16 bucket_order=0
  jffs2: version 2.2. (NAND) (SUMMARY) © 2001-2006 Red Hat, Inc.
  io scheduler noop registered
  io scheduler deadline registered
  io scheduler cfq registered (default)
  dma-pl330 f8003000.ps7-dma: Loaded driver for PL330 DMAC-241330
  dma-pl330 f8003000.ps7-dma: DBUFF-128x8bytes Num_Chans-8 Num_Peri-4 Num_Events-16
  e0000000.serial: ttyPS0 at MMIO 0xe0000000 (irq = 158, base_baud = 6249999) is a xuartps
  console [ttyPS0] enabled
  xdevcfg f8007000.ps7-dev-cfg: ioremap 0xf8007000 to cf86e000
  [drm] Initialized drm 1.1.0 20060810
  brd: module loaded
  loop: module loaded
  CAN device driver interface
  gpiod_set_value: invalid GPIO
  libphy: MACB_mii_bus: probed
  macb e000b000.ethernet eth0: Cadence GEM rev 0x00020118 at 0xe000b000 irq 31 (00:0a:35:00:00:00)
  Generic PHY e000b000.etherne:00: attached PHY driver [Generic PHY] (mii_bus:phy_addr=e000b000.etherne:00, irq=-1)
  e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k
  e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
  ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
  ehci-pci: EHCI PCI platform driver
  usbcore: registered new interface driver usb-storage
  mousedev: PS/2 mouse device common for all mice
  i2c /dev entries driver
  Xilinx Zynq CpuIdle Driver started
  sdhci: Secure Digital Host Controller Interface driver
  sdhci: Copyright(c) Pierre Ossman
  sdhci-pltfm: SDHCI platform and OF driver helper
  mmc0: SDHCI controller on e0100000.ps7-sdio [e0100000.ps7-sdio] using ADMA
  ledtrig-cpu: registered to indicate activity on CPUs
  usbcore: registered new interface driver usbhid
  usbhid: USB HID core driver
  nand: device found, Manufacturer ID: 0x2c, Chip ID: 0xda
  nand: Micron MT29F2G08ABAGAWP
  nand: 256 MiB, SLC, erase size: 128 KiB, page size: 2048, OOB size: 128
  nand: WARNING: pl35x-nand: the ECC used on your system is too weak compared to the one required by the NAND chip
  Bad block table found at page 131008, version 0x01
  Bad block table found at page 130944, version 0x01
  6 ofpart partitions found on MTD device pl35x-nand
  Creating 6 MTD partitions on "pl35x-nand":
  0x000000000000-0x000002800000 : "BOOT.bin-env-dts-kernel"
  0x000002800000-0x000004800000 : "ramfs"
  0x000004800000-0x000005000000 : "configs"
  0x000005000000-0x000006000000 : "reserve"
  0x000006000000-0x000008000000 : "ramfs-bak"
  0x000008000000-0x000010000000 : "reserve1"
  NET: Registered protocol family 10
  sit: IPv6 over IPv4 tunneling driver
  NET: Registered protocol family 17
  can: controller area network core (rev 20120528 abi 9)
  NET: Registered protocol family 29
  can: raw protocol (rev 20120528)
  can: broadcast manager protocol (rev 20120528 t)
  can: netlink gateway (rev 20130117) max_hops=1
  zynq_pm_ioremap: no compatible node found for 'xlnx,zynq-ddrc-a05'
  zynq_pm_late_init: Unable to map DDRC IO memory.
  Registering SWP/SWPB emulation handler
  hctosys: unable to open rtc device (rtc0)
  ALSA device list:
  No soundcards found.
  RAMDISK: gzip image found at block 0
  EXT4-fs (ram0): couldn't mount as ext3 due to feature incompatibilities
  EXT4-fs (ram0): mounted filesystem without journal. Opts: (null)
  VFS: Mounted root (ext4 filesystem) on device 1:0.
  devtmpfs: mounted
  Freeing unused kernel memory: 1024K (c0a00000 - c0b00000)
  EXT4-fs (ram0): re-mounted. Opts: block_validity,delalloc,barrier,user_xattr
  random: dd urandom read with 0 bits of entropy available
  ubi0: attaching mtd2
  ubi0: scanning is finished
  ubi0: attached mtd2 (name "configs", size 8 MiB)
  ubi0: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes
  ubi0: min./max. I/O unit sizes: 2048/2048, sub-page size 2048
  ubi0: VID header offset: 2048 (aligned 2048), data offset: 4096
  ubi0: good PEBs: 64, bad PEBs: 0, corrupted PEBs: 0
  ubi0: user volume: 1, internal volumes: 1, max. volumes count: 128
  ubi0: max/mean erase counter: 19/8, WL threshold: 4096, image sequence number: 306349061
  ubi0: available PEBs: 0, total reserved PEBs: 64, PEBs reserved for bad PEB handling: 40
  ubi0: background thread "ubi_bgt0d" started, PID 708
  UBIFS (ubi0:0): background thread "ubifs_bgt0_0" started, PID 711
  UBIFS (ubi0:0): recovery needed
  UBIFS (ubi0:0): recovery completed
  UBIFS (ubi0:0): UBIFS: mounted UBI device 0, volume 0, name "configs"
  UBIFS (ubi0:0): LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
  UBIFS (ubi0:0): FS size: 1396736 bytes (1 MiB, 11 LEBs), journal size 888833 bytes (0 MiB, 5 LEBs)
  UBIFS (ubi0:0): reserved for root: 65970 bytes (64 KiB)
  UBIFS (ubi0:0): media format: w4/r0 (latest is w4/r0), UUID 038216C1-D266-46DA-A76E-C04B142933A3, small LPT model
  ubi1: attaching mtd5
  ubi1: scanning is finished
  ubi1: attached mtd5 (name "reserve1", size 128 MiB)
  ubi1: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes
  ubi1: min./max. I/O unit sizes: 2048/2048, sub-page size 2048
  ubi1: VID header offset: 2048 (aligned 2048), data offset: 4096
  ubi1: good PEBs: 1020, bad PEBs: 4, corrupted PEBs: 0
  ubi1: user volume: 1, internal volumes: 1, max. volumes count: 128
  ubi1: max/mean erase counter: 256/68, WL threshold: 4096, image sequence number: 1751317449
  ubi1: available PEBs: 0, total reserved PEBs: 1020, PEBs reserved for bad PEB handling: 36
  ubi1: background thread "ubi_bgt1d" started, PID 720
  UBIFS (ubi1:0): background thread "ubifs_bgt1_0" started, PID 723
  UBIFS (ubi1:0): recovery needed
  UBIFS (ubi1:0): recovery completed
  UBIFS (ubi1:0): UBIFS: mounted UBI device 1, volume 0, name "reserve1"
  UBIFS (ubi1:0): LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
  UBIFS (ubi1:0): FS size: 123039744 bytes (117 MiB, 969 LEBs), journal size 6221824 bytes (5 MiB, 49 LEBs)
  UBIFS (ubi1:0): reserved for root: 4952683 bytes (4836 KiB)
  UBIFS (ubi1:0): media format: w4/r0 (latest is w4/r0), UUID 51C7124B-A562-4AA0-948B-184BE8DB9030, small LPT model
  IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
  IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
  macb e000b000.ethernet eth0: unable to generate target frequency: 25000000 Hz
  macb e000b000.ethernet eth0: link up (100/Full)
  IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
  In axi fpga driver!
  request_mem_region OK!
  AXI fpga dev virtual address is 0xcfb54000
  *base_vir_addr = 0xab013
  In fpga mem driver!
  request_mem_region OK!
  fpga mem virtual address is 0xd2000000
  random: nonblocking pool is initialized
  2020-07-26 21:44:45 driver-btm-api.c:782:init_freq_mode: This is scan-user version
  2020-07-26 21:44:45 driver-btm-api.c:2082:bitmain_soc_init: opt_multi_version = 1
  2020-07-26 21:44:45 driver-btm-api.c:2083:bitmain_soc_init: opt_bitmain_ab = 1
  2020-07-26 21:44:45 driver-btm-api.c:2084:bitmain_soc_init: opt_bitmain_work_mode = 0
  2020-07-26 21:44:45 driver-btm-api.c:2085:bitmain_soc_init: Miner compile time: Mon Jul 29 00:19:06 CST 2019 type: Antminer X17
  2020-07-26 21:44:45 driver-btm-api.c:2086:bitmain_soc_init: commit version: e33ca6d 2019-07-18 12:39:03, build by: lol 2019-07-29 00:27:27
  2020-07-26 21:44:45 driver-btm-api.c:1937:show_sn: no SN got, please write SN to /nvdata/sn
  2020-07-26 21:44:45 driver-btm-api.c:1271:miner_device_init: Detect 256MB control board of XILINX
  2020-07-26 21:44:45 driver-btm-api.c:1219:init_fan_parameter: fan_eft : 0 fan_pwm : 100
  2020-07-26 21:44:45 thread.c:745:create_read_nonce_reg_thread: create thread
  2020-07-26 21:44:51 driver-btm-api.c:1203:init_miner_version: miner ID : 815875482b10481c
  2020-07-26 21:44:51 driver-btm-api.c:1209:init_miner_version: FPGA Version = 0xB013
  2020-07-26 21:44:53 Cgminer CRC check fail.
  2020-07-26 21:44:53 eeprom.c:431:check_pattern_test_level: L1 board
  2020-07-26 21:44:55 Cgminer CRC check fail.
  2020-07-26 21:44:55 eeprom.c:436:check_pattern_test_level: L2 board
  2020-07-26 21:44:57 Cgminer CRC check fail.
  2020-07-26 21:44:57 eeprom.c:441:check_pattern_test_level: L3 board
  2020-07-26 21:44:57 driver-btm-api.c:849:get_product_id: product_id[0] = 1
  2020-07-26 21:44:57 driver-btm-api.c:849:get_product_id: product_id[1] = 1
  2020-07-26 21:44:57 driver-btm-api.c:849:get_product_id: product_id[2] = 1
  2020-07-26 21:44:57 driver-btm-api.c:1760:get_ccdly_opt: ccdly_opt[0] = 1
  2020-07-26 21:44:57 driver-btm-api.c:1760:get_ccdly_opt: ccdly_opt[1] = 1
  2020-07-26 21:44:57 driver-btm-api.c:1760:get_ccdly_opt: ccdly_opt[2] = 1
  2020-07-26 21:44:57 driver-btm-api.c:1995:bitmain_board_init: g_ccdly_opt = 1
  2020-07-26 21:44:57 Cgminer crc check is not pass.
  2020-07-26 21:44:57 Cgminer crc check is not pass.
  2020-07-26 21:44:57 Project type is X17.
  2020-07-26 21:44:57 driver-btm-api.c:795:_set_project_type: project:3
  2020-07-26 21:44:57 driver-btm-api.c:825:_set_project_type: Project type: Antminer X17
  2020-07-26 21:44:57 driver-btm-api.c:836:dump_pcb_bom_version: Chain [0] PCB Version: 0x0100
  2020-07-26 21:44:57 driver-btm-api.c:837:dump_pcb_bom_version: Chain [0] BOM Version: 0x0100
  2020-07-26 21:44:57 driver-btm-api.c:836:dump_pcb_bom_version: Chain [1] PCB Version: 0x0100
  2020-07-26 21:44:57 driver-btm-api.c:837:dump_pcb_bom_version: Chain [1] BOM Version: 0x0100
  2020-07-26 21:44:57 driver-btm-api.c:836:dump_pcb_bom_version: Chain [2] PCB Version: 0x0100
  2020-07-26 21:44:57 driver-btm-api.c:837:dump_pcb_bom_version: Chain [2] BOM Version: 0x0100
  2020-07-26 21:44:57 driver-btm-api.c:2015:bitmain_board_init: Fan check passed.
  2020-07-26 21:44:59 board.c:36:jump_and_app_check_restore_pic: chain[0] PIC jump to app
  2020-07-26 21:45:02 board.c:40:jump_and_app_check_restore_pic: Check chain[0] PIC fw version=0xb9
  2020-07-26 21:45:04 board.c:36:jump_and_app_check_restore_pic: chain[1] PIC jump to app
  2020-07-26 21:45:07 board.c:40:jump_and_app_check_restore_pic: Check chain[1] PIC fw version=0xb9
  2020-07-26 21:45:09 board.c:36:jump_and_app_check_restore_pic: chain[2] PIC jump to app
  2020-07-26 21:45:13 board.c:40:jump_and_app_check_restore_pic: Check chain[2] PIC fw version=0xb9
  2020-07-26 21:45:13 thread.c:740:create_pic_heart_beat_thread: create thread
  2020-07-26 21:45:13 power_api.c:55:power_init: power init ...
  2020-07-26 21:45:13 driver-btm-api.c:2025:bitmain_board_init: Enter 30s sleep to make sure power release finish.
  2020-07-26 21:45:45 power_api.c:231:set_iic_power_to_highest_voltage: setting to voltage: 17.00 ...
  2020-07-26 21:45:50 power_api.c:123:check_voltage_multi: retry time: 0
  2020-07-26 21:45:52 power_api.c:85:get_average_voltage: chain[0], voltage is: 17.120039
  2020-07-26 21:45:54 power_api.c:85:get_average_voltage: chain[1], voltage is: 17.046562
  2020-07-26 21:45:56 power_api.c:85:get_average_voltage: chain[2], voltage is: 17.107793
  2020-07-26 21:45:56 power_api.c:96:get_average_voltage: aveage voltage is: 17.091465
  2020-07-26 21:45:56 power_api.c:181:set_iic_power_by_voltage: now set voltage to : 17.000000
  2020-07-26 21:45:56 driver-hash-chip.c:233:dhash_chip_set_baud_v2: chain[0]: chip baud = 115200, chip_divider = 26
  2020-07-26 21:45:56 driver-hash-chip.c:233:dhash_chip_set_baud_v2: chain[1]: chip baud = 115200, chip_divider = 26
  2020-07-26 21:45:56 driver-hash-chip.c:233:dhash_chip_set_baud_v2: chain[2]: chip baud = 115200, chip_divider = 26
  2020-07-26 21:45:56 uart.c:80:set_baud: set fpga_baud = 115200, fpga_divider = 26
  2020-07-26 21:46:07 driver-btm-api.c:1146:check_asic_number_with_power_on: Chain[0]: find 30 asic, times 0
  2020-07-26 21:46:17 driver-btm-api.c:1146:check_asic_number_with_power_on: Chain[1]: find 30 asic, times 0
  2020-07-26 21:46:27 driver-btm-api.c:1146:check_asic_number_with_power_on: Chain[2]: find 30 asic, times 0
  2020-07-26 21:46:31 driver-btm-api.c:339:set_order_clock: chain[0]: set order clock, stragegy 3 clock_en=0x1
  2020-07-26 21:46:31 driver-btm-api.c:339:set_order_clock: chain[1]: set order clock, stragegy 3 clock_en=0x1
  2020-07-26 21:46:31 driver-btm-api.c:339:set_order_clock: chain[2]: set order clock, stragegy 3 clock_en=0x1
  2020-07-26 21:46:31 driver-hash-chip.c:490:set_clock_delay_control: core_data = 0xb4
  2020-07-26 21:46:31 driver-hash-chip.c:233:dhash_chip_set_baud_v2: chain[0]: chip baud = 3000000, chip_divider = 0
  2020-07-26 21:46:31 driver-hash-chip.c:233:dhash_chip_set_baud_v2: chain[1]: chip baud = 3000000, chip_divider = 0
  2020-07-26 21:46:31 driver-hash-chip.c:233:dhash_chip_set_baud_v2: chain[2]: chip baud = 3000000, chip_divider = 0
  2020-07-26 21:46:31 uart.c:80:set_baud: set fpga_baud = 3000000, fpga_divider = 0
  2020-07-26 21:46:31 driver-btm-api.c:1787:check_clock_counter: freq 50 clock_counter_limit 6
  2020-07-26 21:46:32 driver-hash-chip.c:233:dhash_chip_set_baud_v2: chain[0]: chip baud = 115200, chip_divider = 26
  2020-07-26 21:46:32 driver-hash-chip.c:233:dhash_chip_set_baud_v2: chain[1]: chip baud = 115200, chip_divider = 26
  2020-07-26 21:46:32 driver-hash-chip.c:233:dhash_chip_set_baud_v2: chain[2]: chip baud = 115200, chip_divider = 26
  2020-07-26 21:46:32 uart.c:80:set_baud: set fpga_baud = 115200, fpga_divider = 26
  2020-07-26 21:46:32 voltage[0] = 1740
  2020-07-26 21:46:32 voltage[1] = 1740
  2020-07-26 21:46:32 voltage[2] = 1740
  2020-07-26 21:46:32 power_api.c:139:set_working_voltage: working_voltage = 17.400000
  2020-07-26 21:46:33 temperature.c:268:calibrate_temp_sensor_one_chain: Temperature sensor calibration: chain 0 success.
  2020-07-26 21:46:34 temperature.c:189:is_temp_sensor_type_correct: Wrong temp sensor type, chain = 1, sensor = 6, type = 0x0, retry.
  2020-07-26 21:46:34 temperature.c:189:is_temp_sensor_type_correct: Wrong temp sensor type, chain = 1, sensor = 6, type = 0x0, retry.
  2020-07-26 21:46:35 temperature.c:189:is_temp_sensor_type_correct: Wrong temp sensor type, chain = 1, sensor = 6, type = 0x0, retry.
  2020-07-26 21:46:35 temperature.c:189:is_temp_sensor_type_correct: Wrong temp sensor type, chain = 1, sensor = 6, type = 0x0, retry.
  2020-07-26 21:46:35 driver-btm-api.c:197:set_miner_status: ERROR_TEMP_LOST
  2020-07-26 21:46:35 driver-btm-api.c:138:stop_mining: stop mining: Can't get temperature sensor type!
  2020-07-26 21:46:35 thread.c:790:cancel_read_nonce_reg_thread: cancel thread
  2020-07-26 21:46:35 driver-btm-api.c:124:killall_hashboard: ****power off hashboard****

  0

  Comment actions Permalink
• 

  Albert Gasratyan

  • August 03, 2020 17:23

  Hello, have a same problen on T17 (42 th). Can you please send the SD card recovery image?  Thanks

  e-mail: 5188311@gmail.com

  0

  Comment actions Permalink
• 

  Yura Klyshnikov

  • August 05, 2020 21:54
  • Edited

  Hi

  I've faced with this problem too.

  Could you please send me the firmware?

  S17 Pro 53Th

  thanks

  urikedr@gmail.com

  0

  Comment actions Permalink
• 

  farbod

  • August 06, 2020 07:21

  Hello, have a same problen on T17 (42 th). Can you pleasssse send the SD card recovery image?  Thanks 

  gmail : farbod.fm2@mail.com

  0

  Comment actions Permalink
• 

  Владимир

  • August 06, 2020 19:07

  Hi

  I've faced with this problem too.

  Could you please send me the firmware?

  S17 Pro 53Th

  thanks

  vo_93v@mail.ru

  0

  Comment actions Permalink
• 

  moosa kamel

  • August 18, 2020 13:58

  hi guys I have the T17e 50th with the exact same kernel logs to put me a chain down can I have a firmware sent please that will fix this? m.powerelec@gmail.com

  0

  Comment actions Permalink
• 

  Michael VanSickle

  • August 18, 2020 18:52

  Could I please get a copy as well?  Same error on S17 Pro 50T/53T.  Thanks!

  mvansickle@greenidgellc.com

  0

  Comment actions Permalink
• 

  pavel.nedostal

  • September 07, 2020 18:21

  Same problem on T17.  Could you also send me the firmware please ? pavel.nedostal@email.cz

  Thanks.

  0

  Comment actions Permalink
• 

  aspiritoso

  • September 21, 2020 04:12

  Same problem on T17.  Could you also send me the firmware please ? mercadocanon@hotmail.com

  Thanks in advance

  0

  Comment actions Permalink
• 

  Ildar

  • October 04, 2020 12:32

  Same problem on S17Pro.  Could you also send me the firmware? ildarnolastname@gmail.com

  0

  Comment actions Permalink
• 

  fzt

  • October 06, 2020 13:23

  Hi, have a same problem on T17 (42 th).
  Can you please send the SD card recovery image?
  Thanks.
  minerglider@gmail.com

  0

  Comment actions Permalink
• 

  Roham boshkani

  • October 19, 2020 02:46

  Hi , ihave some problem t17+ ( 64 th ) , plz send me recovery image . Tnq
  roham.boshkanii@gmail.com

  0

  Comment actions Permalink
• 

  Roham boshkani

  • October 19, 2020 02:48

  Kernl log :
  Booting Linux on physical CPU 0x0 Linux version 4.6.0-xilinx-gff8137b-dirty (lzq@armdev2) (gcc version 4.8.3 20140320 (prerelease) (Sourcery CodeBench Lite 2014.05-23) ) #25 SMP PREEMPT Fri Nov 23 15:30:52 CST 2018 CPU: ARMv7 Processor [413fc090] revision 0 (ARMv7), cr=18c5387d CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache Machine model: Xilinx Zynq cma: Reserved 16 MiB at 0x0e000000 Memory policy: Data cache writealloc On node 0 totalpages: 61440 free_area_init_node: node 0, pgdat c0b39280, node_mem_map cde10000 Normal zone: 480 pages used for memmap Normal zone: 0 pages reserved Normal zone: 61440 pages, LIFO batch:15 percpu: Embedded 12 pages/cpu @cddf1000 s19776 r8192 d21184 u49152 pcpu-alloc: s19776 r8192 d21184 u49152 alloc=12*4096 pcpu-alloc: [0] 0 [0] 1 Built 1 zonelists in Zone order, mobility grouping on. Total pages: 60960 Kernel command line: mem=240M console=ttyPS0,115200 ramdisk_size=33554432 root=/dev/ram rw earlyprintk PID hash table entries: 1024 (order: 0, 4096 bytes) Dentry cache hash table entries: 32768 (order: 5, 131072 bytes) Inode-cache hash table entries: 16384 (order: 4, 65536 bytes) Memory: 203436K/245760K available (6345K kernel code, 231K rwdata, 1896K rodata, 1024K init, 223K bss, 25940K reserved, 16384K cma-reserved, 0K highmem) Virtual kernel memory layout: vector : 0xffff0000 - 0xffff1000 ( 4 kB) fixmap : 0xffc00000 - 0xfff00000 (3072 kB) vmalloc : 0xcf800000 - 0xff800000 ( 768 MB) lowmem : 0xc0000000 - 0xcf000000 ( 240 MB) pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB) modules : 0xbf000000 - 0xbfe00000 ( 14 MB) .text : 0xc0008000 - 0xc090c424 (9234 kB) .init : 0xc0a00000 - 0xc0b00000 (1024 kB) .data : 0xc0b00000 - 0xc0b39fe0 ( 232 kB) .bss : 0xc0b39fe0 - 0xc0b71c28 ( 224 kB) Preemptible hierarchical RCU implementation. Build-time adjustment of leaf fanout to 32. RCU restricting CPUs from NR_CPUS=4 to nr_cpu_ids=2. RCU: Adjusting geometry for rcu_fanout_leaf=32, nr_cpu_ids=2 NR_IRQS:16 nr_irqs:16 16 efuse mapped to cf800000 ps7-slcr mapped to cf802000 L2C: platform modifies aux control register: 0x72360000 -> 0x72760000 L2C: DT/platform modifies aux control register: 0x72360000 -> 0x72760000 L2C-310 erratum 769419 enabled L2C-310 enabling early BRESP for Cortex-A9 L2C-310 full line of zeros enabled for Cortex-A9 L2C-310 ID prefetch enabled, offset 1 lines L2C-310 dynamic clock gating enabled, standby mode enabled L2C-310 cache controller enabled, 8 ways, 512 kB L2C-310: CACHE_ID 0x410000c8, AUX_CTRL 0x76760001 zynq_clock_init: clkc starts at cf802100 Zynq clock init sched_clock: 64 bits at 333MHz, resolution 3ns, wraps every 4398046511103ns clocksource: arm_global_timer: mask: 0xffffffffffffffff max_cycles: 0x4ce07af025, max_idle_ns: 440795209040 ns Switching to timer-based delay loop, resolution 3ns clocksource: ttc_clocksource: mask: 0xffff max_cycles: 0xffff, max_idle_ns: 537538477 ns ps7-ttc #0 at cf80a000, irq=18 Console: colour dummy device 80x30 Calibrating delay loop (skipped), value calculated using timer frequency.. 666.66 BogoMIPS (lpj=3333333) pid_max: default: 32768 minimum: 301 Mount-cache hash table entries: 1024 (order: 0, 4096 bytes) Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes) CPU: Testing write buffer coherency: ok CPU0: thread -1, cpu 0, socket 0, mpidr 80000000 Setting up static identity map for 0x100000 - 0x100058 CPU1: failed to boot: -1 Brought up 1 CPUs SMP: Total of 1 processors activated (666.66 BogoMIPS). CPU: All CPU(s) started in SVC mode. devtmpfs: initialized VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 4 clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns pinctrl core: initialized pinctrl subsystem NET: Registered protocol family 16 DMA: preallocated 256 KiB pool for atomic coherent allocations cpuidle: using governor menu hw-breakpoint: found 5 (+1 reserved) breakpoint and 1 watchpoint registers. hw-breakpoint: maximum watchpoint size is 4 bytes. zynq-ocm f800c000.ps7-ocmc: ZYNQ OCM pool: 256 KiB @ 0xcf880000 vgaarb: loaded SCSI subsystem initialized usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb media: Linux media interface: v0.10 Linux video capture interface: v2.00 pps_core: LinuxPPS API ver. 1 registered pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti PTP clock support registered EDAC MC: Ver: 3.0.0 Advanced Linux Sound Architecture Driver Initialized. clocksource: Switched to clocksource arm_global_timer NET: Registered protocol family 2 TCP established hash table entries: 2048 (order: 1, 8192 bytes) TCP bind hash table entries: 2048 (order: 2, 16384 bytes) TCP: Hash tables configured (established 2048 bind 2048) UDP hash table entries: 256 (order: 1, 8192 bytes) UDP-Lite hash table entries: 256 (order: 1, 8192 bytes) NET: Registered protocol family 1 RPC: Registered named UNIX socket transport module. RPC: Registered udp transport module. RPC: Registered tcp transport module. RPC: Registered tcp NFSv4.1 backchannel transport module. PCI: CLS 0 bytes, default 64 Trying to unpack rootfs image as initramfs... rootfs image is not initramfs (no cpio magic); looks like an initrd Freeing initrd memory: 12900K (cce67000 - cdb00000) hw perfevents: enabled with armv7_cortex_a9 PMU driver, 7 counters available futex hash table entries: 512 (order: 3, 32768 bytes) workingset: timestamp_bits=28 max_order=16 bucket_order=0 jffs2: version 2.2. (NAND) (SUMMARY) © 2001-2006 Red Hat, Inc. io scheduler noop registered io scheduler deadline registered io scheduler cfq registered (default) dma-pl330 f8003000.ps7-dma: Loaded driver for PL330 DMAC-241330 dma-pl330 f8003000.ps7-dma: DBUFF-128x8bytes Num_Chans-8 Num_Peri-4 Num_Events-16 e0000000.serial: ttyPS0 at MMIO 0xe0000000 (irq = 158, base_baud = 6249999) is a xuartps console [ttyPS0] enabled xdevcfg f8007000.ps7-dev-cfg: ioremap 0xf8007000 to cf86e000 [drm] Initialized drm 1.1.0 20060810 brd: module loaded loop: module loaded CAN device driver interface gpiod_set_value: invalid GPIO libphy: MACB_mii_bus: probed macb e000b000.ethernet eth0: Cadence GEM rev 0x00020118 at 0xe000b000 irq 31 (00:0a:35:00:00:00) Generic PHY e000b000.etherne:00: attached PHY driver [Generic PHY] (mii_bus:phy_addr=e000b000.etherne:00, irq=-1) e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k e1000e: Copyright(c) 1999 - 2015 Intel Corporation. ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver ehci-pci: EHCI PCI platform driver usbcore: registered new interface driver usb-storage mousedev: PS/2 mouse device common for all mice i2c /dev entries driver Xilinx Zynq CpuIdle Driver started sdhci: Secure Digital Host Controller Interface driver sdhci: Copyright(c) Pierre Ossman sdhci-pltfm: SDHCI platform and OF driver helper mmc0: SDHCI controller on e0100000.ps7-sdio [e0100000.ps7-sdio] using ADMA ledtrig-cpu: registered to indicate activity on CPUs usbcore: registered new interface driver usbhid usbhid: USB HID core driver nand: device found, Manufacturer ID: 0x2c, Chip ID: 0xda nand: Micron MT29F2G08ABAGAWP nand: 256 MiB, SLC, erase size: 128 KiB, page size: 2048, OOB size: 128 nand: WARNING: pl35x-nand: the ECC used on your system is too weak compared to the one required by the NAND chip Bad block table found at page 131008, version 0x01 Bad block table found at page 130944, version 0x01 6 ofpart partitions found on MTD device pl35x-nand Creating 6 MTD partitions on "pl35x-nand": 0x000000000000-0x000002800000 : "BOOT.bin-env-dts-kernel" 0x000002800000-0x000004800000 : "ramfs" 0x000004800000-0x000005000000 : "configs" 0x000005000000-0x000006000000 : "reserve" 0x000006000000-0x000008000000 : "ramfs-bak" 0x000008000000-0x000010000000 : "reserve1" NET: Registered protocol family 10 sit: IPv6 over IPv4 tunneling driver NET: Registered protocol family 17 can: controller area network core (rev 20120528 abi 9) NET: Registered protocol family 29 can: raw protocol (rev 20120528) can: broadcast manager protocol (rev 20120528 t) can: netlink gateway (rev 20130117) max_hops=1 zynq_pm_ioremap: no compatible node found for 'xlnx,zynq-ddrc-a05' zynq_pm_late_init: Unable to map DDRC IO memory. Registering SWP/SWPB emulation handler hctosys: unable to open rtc device (rtc0) ALSA device list: No soundcards found. RAMDISK: gzip image found at block 0 EXT4-fs (ram0): couldn't mount as ext3 due to feature incompatibilities EXT4-fs (ram0): mounted filesystem without journal. Opts: (null) VFS: Mounted root (ext4 filesystem) on device 1:0. devtmpfs: mounted Freeing unused kernel memory: 1024K (c0a00000 - c0b00000) EXT4-fs (ram0): re-mounted. Opts: block_validity,delalloc,barrier,user_xattr random: dd urandom read with 0 bits of entropy available ubi0: attaching mtd2 ubi0: scanning is finished ubi0: attached mtd2 (name "configs", size 8 MiB) ubi0: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes ubi0: min./max. I/O unit sizes: 2048/2048, sub-page size 2048 ubi0: VID header offset: 2048 (aligned 2048), data offset: 4096 ubi0: good PEBs: 64, bad PEBs: 0, corrupted PEBs: 0 ubi0: user volume: 1, internal volumes: 1, max. volumes count: 128 ubi0: max/mean erase counter: 9/4, WL threshold: 4096, image sequence number: 3312066287 ubi0: available PEBs: 0, total reserved PEBs: 64, PEBs reserved for bad PEB handling: 40 ubi0: background thread "ubi_bgt0d" started, PID 708 UBIFS (ubi0:0): background thread "ubifs_bgt0_0" started, PID 711 UBIFS (ubi0:0): recovery needed UBIFS (ubi0:0): recovery completed UBIFS (ubi0:0): UBIFS: mounted UBI device 0, volume 0, name "configs" UBIFS (ubi0:0): LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes UBIFS (ubi0:0): FS size: 1396736 bytes (1 MiB, 11 LEBs), journal size 888833 bytes (0 MiB, 5 LEBs) UBIFS (ubi0:0): reserved for root: 65970 bytes (64 KiB) UBIFS (ubi0:0): media format: w4/r0 (latest is w4/r0), UUID E76C1C0E-2575-43BD-B94D-FF231A1D12D9, small LPT model ubi1: attaching mtd5 ubi1: scanning is finished ubi1: attached mtd5 (name "reserve1", size 128 MiB) ubi1: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes ubi1: min./max. I/O unit sizes: 2048/2048, sub-page size 2048 ubi1: VID header offset: 2048 (aligned 2048), data offset: 4096 ubi1: good PEBs: 1020, bad PEBs: 4, corrupted PEBs: 0 ubi1: user volume: 1, internal volumes: 1, max. volumes count: 128 ubi1: max/mean erase counter: 24/13, WL threshold: 4096, image sequence number: 2160556823 ubi1: available PEBs: 0, total reserved PEBs: 1020, PEBs reserved for bad PEB handling: 36 ubi1: background thread "ubi_bgt1d" started, PID 720 UBIFS (ubi1:0): background thread "ubifs_bgt1_0" started, PID 723 UBIFS (ubi1:0): recovery needed UBIFS (ubi1:0): recovery completed UBIFS (ubi1:0): UBIFS: mounted UBI device 1, volume 0, name "reserve1" UBIFS (ubi1:0): LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes UBIFS (ubi1:0): FS size: 123039744 bytes (117 MiB, 969 LEBs), journal size 6221824 bytes (5 MiB, 49 LEBs) UBIFS (ubi1:0): reserved for root: 4952683 bytes (4836 KiB) UBIFS (ubi1:0): media format: w4/r0 (latest is w4/r0), UUID A1CE686D-9B2B-491E-941A-1FF0E19FFF0D, small LPT model IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready macb e000b000.ethernet eth0: unable to generate target frequency: 25000000 Hz macb e000b000.ethernet eth0: link up (100/Full) IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready In axi fpga driver! request_mem_region OK! AXI fpga dev virtual address is 0xcfb38000 *base_vir_addr = 0xb023 In fpga mem driver! request_mem_region OK! fpga mem virtual address is 0xd2000000 random: nonblocking pool is initialized 2020-10-13 09:14:47 driver-btm-api.c:723:init_freq_mode: This is scan-user version 2020-10-13 09:14:47 driver-btm-api.c:2514:bitmain_soc_init: opt_multi_version = 1 2020-10-13 09:14:47 driver-btm-api.c:2515:bitmain_soc_init: opt_bitmain_ab = 1 2020-10-13 09:14:47 driver-btm-api.c:2516:bitmain_soc_init: opt_bitmain_work_mode = 0 2020-10-13 09:14:47 driver-btm-api.c:2517:bitmain_soc_init: Miner compile time: Wed Apr 8 11:27:07 CST 2020 type: Antminer T17+ 2020-10-13 09:14:47 driver-btm-api.c:2518:bitmain_soc_init: commit version: fc44955 2020-04-08 11:23:26, build by: lol 2020-04-08 11:32:55 2020-10-13 09:14:47 driver-btm-api.c:2141:show_sn: 811c74864e104814<7 2020-10-13 09:14:47 driver-btm-api.c:2198:handle_sn_for_factory_mode: read sn success, 811c74864e104814<7 2020-10-13 09:14:47 fan.c:258:front_fan_power_on: Note: front fan is power on! 2020-10-13 09:14:47 fan.c:268:rear_fan_power_on: Note: rear fan is power on! 2020-10-13 09:14:47 driver-btm-api.c:1318:miner_device_init: Detect 256MB control board of XILINX 2020-10-13 09:14:47 driver-btm-api.c:1259:init_fan_parameter: fan_eft : 0 fan_pwm : 0 2020-10-13 09:14:53 driver-btm-api.c:1242:init_miner_version: miner ID : 811c74864e104814 2020-10-13 09:14:53 driver-btm-api.c:1248:init_miner_version: FPGA Version = 0xB023 2020-10-13 09:14:59 driver-btm-api.c:775:get_product_id: product_id[0] = 0 2020-10-13 09:14:59 driver-btm-api.c:775:get_product_id: product_id[1] = 0 2020-10-13 09:14:59 driver-btm-api.c:775:get_product_id: product_id[2] = 0 2020-10-13 09:14:59 driver-btm-api.c:806:get_chip_version: chip_version[0] = 0 2020-10-13 09:14:59 driver-btm-api.c:806:get_chip_version: chip_version[1] = 0 2020-10-13 09:14:59 driver-btm-api.c:806:get_chip_version: chip_version[2] = 0 2020-10-13 09:14:59 driver-btm-api.c:2254:update_conf_by_power_feedback: Power feedback is disabled 2020-10-13 09:14:59 driver-btm-api.c:2258:update_conf_by_power_feedback: get_calibration_voltage, vol:1850. 2020-10-13 09:14:59 frequency.c:1290:adjust_higer_max_vol_table: adjust_higer_max_vol_table, ideal_hashrate = 65879, index = 5, adjust_vol = 20 2020-10-13 09:14:59 thread.c:1166:create_read_nonce_reg_thread: create thread 2020-10-13 09:15:05 driver-btm-api.c:1242:init_miner_version: miner ID : 811c74864e104814 2020-10-13 09:15:05 driver-btm-api.c:1248:init_miner_version: FPGA Version = 0xB023 2020-10-13 09:15:10 driver-btm-api.c:775:get_product_id: product_id[0] = 0 2020-10-13 09:15:10 driver-btm-api.c:775:get_product_id: product_id[1] = 0 2020-10-13 09:15:10 driver-btm-api.c:775:get_product_id: product_id[2] = 0 2020-10-13 09:15:10 driver-btm-api.c:806:get_chip_version: chip_version[0] = 0 2020-10-13 09:15:10 driver-btm-api.c:806:get_chip_version: chip_version[1] = 0 2020-10-13 09:15:10 driver-btm-api.c:806:get_chip_version: chip_version[2] = 0 2020-10-13 09:15:10 driver-btm-api.c:1905:get_ccdly_opt: ccdly_opt[0] = 0 2020-10-13 09:15:10 driver-btm-api.c:1905:get_ccdly_opt: ccdly_opt[1] = 0 2020-10-13 09:15:10 driver-btm-api.c:1905:get_ccdly_opt: ccdly_opt[2] = 0 2020-10-13 09:15:10 driver-btm-api.c:2400:bitmain_board_init: g_ccdly_opt = 0 2020-10-13 09:15:10 driver-btm-api.c:736:_set_project_type: project:0, set to T17Plus always 2020-10-13 09:15:10 driver-btm-api.c:751:_set_project_type: Project type: Antminer T17+ 2020-10-13 09:15:10 driver-btm-api.c:762:dump_pcb_bom_version: Chain [0] PCB Version: 0x0100 2020-10-13 09:15:10 driver-btm-api.c:763:dump_pcb_bom_version: Chain [0] BOM Version: 0x0100 2020-10-13 09:15:10 driver-btm-api.c:762:dump_pcb_bom_version: Chain [1] PCB Version: 0x0100 2020-10-13 09:15:10 driver-btm-api.c:763:dump_pcb_bom_version: Chain [1] BOM Version: 0x0100 2020-10-13 09:15:10 driver-btm-api.c:762:dump_pcb_bom_version: Chain [2] PCB Version: 0x0100 2020-10-13 09:15:10 driver-btm-api.c:763:dump_pcb_bom_version: Chain [2] BOM Version: 0x0100 2020-10-13 09:15:10 driver-btm-api.c:2422:bitmain_board_init: Fan check passed. 2020-10-13 09:15:11 board.c:36:jump_and_app_check_restore_pic: chain[0] PIC jump to app 2020-10-13 09:15:13 board.c:40:jump_and_app_check_restore_pic: Check chain[0] PIC fw version=0x88 2020-10-13 09:15:14 board.c:36:jump_and_app_check_restore_pic: chain[1] PIC jump to app 2020-10-13 09:15:16 board.c:40:jump_and_app_check_restore_pic: Check chain[1] PIC fw version=0x88 2020-10-13 09:15:17 board.c:36:jump_and_app_check_restore_pic: chain[2] PIC jump to app 2020-10-13 09:15:19 board.c:40:jump_and_app_check_restore_pic: Check chain[2] PIC fw version=0x88 2020-10-13 09:15:19 thread.c:1161:create_pic_heart_beat_thread: create thread 2020-10-13 09:15:21 power_api.c:231:power_init: power type version: 0x0042 2020-10-13 09:15:21 power_api.c:249:power_init: Power init: 2020-10-13 09:15:21 power_api.c:250:power_init: current_voltage_raw = 0 2020-10-13 09:15:21 power_api.c:251:power_init: highest_voltage_raw = 1950 2020-10-13 09:15:21 power_api.c:252:power_init: working_voltage_raw = 1900 2020-10-13 09:15:21 power_api.c:253:power_init: higher_voltage_raw = 1930 2020-10-13 09:15:21 power_api.c:254:power_init: check_asic_voltage_raw = 2000 2020-10-13 09:15:21 driver-btm-api.c:2432:bitmain_board_init: Enter 30s sleep to make sure power release finish. 2020-10-13 09:15:21 power_api.c:218:power_off: init gpio907 2020-10-13 09:15:21 power_api.c:221:power_off: set gpio907 to 1 2020-10-13 09:15:52 power_api.c:206:power_on: set gpio907 to 0 2020-10-13 09:15:53 power_api.c:388:set_to_voltage_by_steps: Set to voltage raw 1850, step by step. 2020-10-13 09:16:11 power_api.c:120:check_voltage_multi: retry time: 0 2020-10-13 09:16:12 power_api.c:56:_get_avg_voltage: an6 raw = 2.561290, factor = 1.024516 2020-10-13 09:16:12 power_api.c:60:_get_avg_voltage: chain 0, an0 = 0.454660, an2 18.473552, an6 2.500000. 2020-10-13 09:16:13 power_api.c:56:_get_avg_voltage: an6 raw = 2.558065, factor = 1.023226 2020-10-13 09:16:13 power_api.c:60:_get_avg_voltage: chain 1, an0 = 0.527112, an2 18.592686, an6 2.500000. 2020-10-13 09:16:14 power_api.c:56:_get_avg_voltage: an6 raw = 2.558065, factor = 1.023226 2020-10-13 09:16:14 power_api.c:60:_get_avg_voltage: chain 2, an0 = 0.527112, an2 20.964691, an6 2.500000. 2020-10-13 09:16:14 power_api.c:85:_get_avg_voltage: average_voltage = 19.343643 2020-10-13 09:16:14 power_api.c:106:check_voltage: target_vol = 18.50, actural_vol = 19.34, check voltage passed. 2020-10-13 09:16:17 power_api.c:56:_get_avg_voltage: an6 raw = 2.561290, factor = 1.024516 2020-10-13 09:16:17 power_api.c:60:_get_avg_voltage: chain 0, an0 = 0.454660, an2 18.449623, an6 2.500000. 2020-10-13 09:16:18 power_api.c:56:_get_avg_voltage: an6 raw = 2.561290, factor = 1.024516 2020-10-13 09:16:18 power_api.c:60:_get_avg_voltage: chain 1, an0 = 0.526448, an2 18.569270, an6 2.500000. 2020-10-13 09:16:19 power_api.c:56:_get_avg_voltage: an6 raw = 2.554839, factor = 1.021935 2020-10-13 09:16:19 power_api.c:60:_get_avg_voltage: chain 2, an0 = 0.527778, an2 20.967173, an6 2.500000. 2020-10-13 09:16:19 power_api.c:85:_get_avg_voltage: average_voltage = 19.328688 2020-10-13 09:16:19 power_api.c:106:check_voltage: target_vol = 18.50, actural_vol = 19.33, check voltage passed. 2020-10-13 09:16:19 uart.c:81:set_baud: set fpga_baud = 115200, fpga_divider = 26 2020-10-13 09:16:28 driver-btm-api.c:1123:check_asic_number_with_power_on: Chain[0]: find 44 asic, times 0 2020-10-13 09:16:37 driver-btm-api.c:1123:check_asic_number_with_power_on: Chain[1]: find 44 asic, times 0 2020-10-13 09:16:46 driver-btm-api.c:1123:check_asic_number_with_power_on: Chain[2]: find 44 asic, times 0 2020-10-13 09:16:51 driver-btm-api.c:386:set_order_clock: chain[0]: set order clock, stragegy 3 clock_en=0x1 2020-10-13 09:16:51 driver-btm-api.c:386:set_order_clock: chain[1]: set order clock, stragegy 3 clock_en=0x1 2020-10-13 09:16:51 driver-btm-api.c:386:set_order_clock: chain[2]: set order clock, stragegy 3 clock_en=0x1 2020-10-13 09:16:52 driver-btm-api.c:1892:get_core_clock_delay_setting: PWTH_SEL 3, CCDLY_SEL 0 2020-10-13 09:16:52 driver-hash-chip.c:502:set_clock_delay_control: core_data = 0x34 2020-10-13 09:16:52 driver-btm-api.c:1933:check_clock_counter: freq 50 clock_counter_limit 6 2020-10-13 09:17:13 voltage[0] = 1760 2020-10-13 09:17:13 voltage[1] = 1760 2020-10-13 09:17:13 voltage[2] = 1760 2020-10-13 09:17:13 power_api.c:262:set_working_voltage_raw: working_voltage_raw = 1760 2020-10-13 09:17:15 temperature.c:313:calibrate_temp_sensor_one_chain: Temperature sensor calibration: chain 0 success. TMP451 2020-10-13 09:17:16 temperature.c:313:calibrate_temp_sensor_one_chain: Temperature sensor calibration: chain 1 success. TMP451 2020-10-13 09:17:17 temperature.c:313:calibrate_temp_sensor_one_chain: Temperature sensor calibration: chain 2 success. TMP451 2020-10-13 09:17:17 uart.c:81:set_baud: set fpga_baud = 6000000, fpga_divider = 3 2020-10-13 09:17:19 driver-btm-api.c:264:check_bringup_temp: Bring up temperature is 25 2020-10-13 09:17:19 thread.c:1181:create_check_miner_status_thread: create thread 2020-10-13 09:17:19 thread.c:1171:create_set_miner_status_thread: create thread 2020-10-13 09:17:19 driver-btm-api.c:673:calculate_timeout: dev->timeout = 245 2020-10-13 09:17:19 thread.c:1151:create_temperature_monitor_thread: create thread 2020-10-13 09:17:19 frequency.c:486:check_bringup_temp_dec_freq: dec freq = 0 when bringup temp = 25 dec_freq_index=2 2020-10-13 09:17:19 freq_tuning.c:184:freq_tuning_get_max_freq: Max freq of tuning is 790 2020-10-13 09:17:19 driver-btm-api.c:1763:send_null_work: [DEBUG] Send null work. 2020-10-13 09:17:19 thread.c:1141:create_asic_status_monitor_thread: create thread 2020-10-13 09:17:19 frequency.c:1095:inc_freq_with_fixed_vco: chain = 255, freq = 725, is_higher_voltage = true 2020-10-13 09:17:19 frequency.c:1111:inc_freq_with_fixed_vco: [0] _POSTDIV1 = 7, _POSTDIV2 = 7, USER_DIV = 1, freq = 44 2020-10-13 09:17:19 frequency.c:1111:inc_freq_with_fixed_vco: [1] _POSTDIV1 = 7, _POSTDIV2 = 6, USER_DIV = 1, freq = 51 2020-10-13 09:17:19 power_api.c:388:set_to_voltage_by_steps: Set to voltage raw 1860, step by step. 2020-10-13 09:17:37 power_api.c:120:check_voltage_multi: retry time: 0 2020-10-13 09:17:38 power_api.c:56:_get_avg_voltage: an6 raw = 2.564516, factor = 1.025806 2020-10-13 09:17:38 power_api.c:60:_get_avg_voltage: chain 0, an0 = 18.545912, an2 18.522012, an6 2.500000. 2020-10-13 09:17:39 power_api.c:56:_get_avg_voltage: an6 raw = 2.564516, factor = 1.025806 2020-10-13 09:17:39 power_api.c:60:_get_avg_voltage: chain 1, an0 = 18.665408, an2 18.641509, an6 2.500000. 2020-10-13 09:17:40 power_api.c:56:_get_avg_voltage: an6 raw = 2.561290, factor = 1.024516 2020-10-13 09:17:40 power_api.c:60:_get_avg_voltage: chain 2, an0 = 18.617129, an2 21.034006, an6 2.500000. 2020-10-13 09:17:40 power_api.c:85:_get_avg_voltage: average_voltage = 19.399175 2020-10-13 09:17:40 power_api.c:106:check_voltage: target_vol = 18.60, actural_vol = 19.40, check voltage passed. 2020-10-13 09:17:42 power_api.c:56:_get_avg_voltage: an6 raw = 2.564516, factor = 1.025806 2020-10-13 09:17:42 power_api.c:60:_get_avg_voltage: chain 0, an0 = 18.545912, an2 18.522012, an6 2.500000. 2020-10-13 09:17:44 power_api.c:56:_get_avg_voltage: an6 raw = 2.564516, factor = 1.025806 2020-10-13 09:17:44 power_api.c:60:_get_avg_voltage: chain 1, an0 = 18.641509, an2 18.641509, an6 2.500000. 2020-10-13 09:17:45 power_api.c:56:_get_avg_voltage: an6 raw = 2.561290, factor = 1.024516 2020-10-13 09:17:45 power_api.c:60:_get_avg_voltage: chain 2, an0 = 18.593200, an2 21.034006, an6 2.500000. 2020-10-13 09:17:45 power_api.c:85:_get_avg_voltage: average_voltage = 19.399175 2020-10-13 09:17:45 power_api.c:106:check_voltage: target_vol = 18.60, actural_vol = 19.40, check voltage passed. 2020-10-13 09:17:46 frequency.c:1111:inc_freq_with_fixed_vco: [2] _POSTDIV1 = 6, _POSTDIV2 = 6, USER_DIV = 1, freq = 60 2020-10-13 09:17:47 frequency.c:1111:inc_freq_with_fixed_vco: [3] _POSTDIV1 = 7, _POSTDIV2 = 5, USER_DIV = 1, freq = 62 2020-10-13 09:17:48 frequency.c:1111:inc_freq_with_fixed_vco: [4] _POSTDIV1 = 6, _POSTDIV2 = 5, USER_DIV = 1, freq = 72 2020-10-13 09:17:49 frequency.c:1111:inc_freq_with_fixed_vco: [5] _POSTDIV1 = 7, _POSTDIV2 = 4, USER_DIV = 1, freq = 77 2020-10-13 09:17:50 frequency.c:1111:inc_freq_with_fixed_vco: [6] _POSTDIV1 = 5, _POSTDIV2 = 5, USER_DIV = 1, freq = 87 2020-10-13 09:17:51 frequency.c:1111:inc_freq_with_fixed_vco: [7] _POSTDIV1 = 6, _POSTDIV2 = 4, USER_DIV = 1, freq = 90 2020-10-13 09:17:52 frequency.c:1111:inc_freq_with_fixed_vco: [8] _POSTDIV1 = 7, _POSTDIV2 = 3, USER_DIV = 1, freq = 103 2020-10-13 09:17:53 frequency.c:1111:inc_freq_with_fixed_vco: [9] _POSTDIV1 = 5, _POSTDIV2 = 4, USER_DIV = 1, freq = 108 2020-10-13 09:17:54 frequency.c:1111:inc_freq_with_fixed_vco: [10] _POSTDIV1 = 6, _POSTDIV2 = 3, USER_DIV = 1, freq = 120 2020-10-13 09:17:55 frequency.c:1111:inc_freq_with_fixed_vco: [11] _POSTDIV1 = 4, _POSTDIV2 = 4, USER_DIV = 1, freq = 135 2020-10-13 09:17:56 frequency.c:1111:inc_freq_with_fixed_vco: [12] _POSTDIV1 = 5, _POSTDIV2 = 3, USER_DIV = 1, freq = 145 2020-10-13 09:17:57 frequency.c:1111:inc_freq_with_fixed_vco: [13] _POSTDIV1 = 7, _POSTDIV2 = 2, USER_DIV = 1, freq = 155 2020-10-13 09:17:58 frequency.c:1111:inc_freq_with_fixed_vco: [14] _POSTDIV1 = 4, _POSTDIV2 = 3, USER_DIV = 1, freq = 181 2020-10-13 09:17:59 frequency.c:1111:inc_freq_with_fixed_vco: [15] _POSTDIV1 = 6, _POSTDIV2 = 2, USER_DIV = 1, freq = 181 2020-10-13 09:18:00 frequency.c:1111:inc_freq_with_fixed_vco: [16] _POSTDIV1 = 5, _POSTDIV2 = 2, USER_DIV = 1, freq = 217 2020-10-13 09:18:01 frequency.c:1111:inc_freq_with_fixed_vco: [17] _POSTDIV1 = 3, _POSTDIV2 = 3, USER_DIV = 1, freq = 241 2020-10-13 09:18:02 frequency.c:1111:inc_freq_with_fixed_vco: [18] _POSTDIV1 = 4, _POSTDIV2 = 2, USER_DIV = 1, freq = 271 2020-10-13 09:18:03 frequency.c:1111:inc_freq_with_fixed_vco: [19] _POSTDIV1 = 7, _POSTDIV2 = 1, USER_DIV = 1, freq = 310 2020-10-13 09:18:04 frequency.c:1111:inc_freq_with_fixed_vco: [20] _POSTDIV1 = 3, _POSTDIV2 = 2, USER_DIV = 1, freq = 362 2020-10-13 09:18:05 frequency.c:1111:inc_freq_with_fixed_vco: [21] _POSTDIV1 = 6, _POSTDIV2 = 1, USER_DIV = 1, freq = 362 2020-10-13 09:18:06 frequency.c:1111:inc_freq_with_fixed_vco: [22] _POSTDIV1 = 5, _POSTDIV2 = 1, USER_DIV = 1, freq = 435 2020-10-13 09:18:07 frequency.c:1111:inc_freq_with_fixed_vco: [23] _POSTDIV1 = 4, _POSTDIV2 = 1, USER_DIV = 1, freq = 543 2020-10-13 09:18:09 frequency.c:1111:inc_freq_with_fixed_vco: [24] _POSTDIV1 = 3, _POSTDIV2 = 1, USER_DIV = 1, freq = 725 2020-10-13 09:18:09 power_api.c:388:set_to_voltage_by_steps: Set to voltage raw 1810, step by step. 2020-10-13 09:18:25 power_api.c:120:check_voltage_multi: retry time: 0 2020-10-13 09:18:27 power_api.c:56:_get_avg_voltage: an6 raw = 2.567742, factor = 1.027097 2020-10-13 09:18:27 power_api.c:60:_get_avg_voltage: chain 0, an0 = 17.973619, an2 17.949749, an6 2.500000. 2020-10-13 09:18:28 power_api.c:56:_get_avg_voltage: an6 raw = 2.570968, factor = 1.028387 2020-10-13 09:18:28 power_api.c:60:_get_avg_voltage: chain 1, an0 = 18.070265, an2 18.094104, an6 2.500000. 2020-10-13 09:18:29 power_api.c:56:_get_avg_voltage: an6 raw = 2.567742, factor = 1.027097 2020-10-13 09:18:29 power_api.c:60:_get_avg_voltage: chain 2, an0 = 18.045227, an2 20.408292, an6 2.500000. 2020-10-13 09:18:29 power_api.c:85:_get_avg_voltage: average_voltage = 18.817382 2020-10-13 09:18:29 power_api.c:106:check_voltage: target_vol = 18.10, actural_vol = 18.82, check voltage passed. 2020-10-13 09:18:31 power_api.c:56:_get_avg_voltage: an6 raw = 2.567742, factor = 1.027097 2020-10-13 09:18:31 power_api.c:60:_get_avg_voltage: chain 0, an0 = 17.973619, an2 17.973619, an6 2.500000. 2020-10-13 09:18:32 power_api.c:56:_get_avg_voltage: an6 raw = 2.574194, factor = 1.029677 2020-10-13 09:18:32 power_api.c:60:_get_avg_voltage: chain 1, an0 = 18.071429, an2 18.095238, an6 2.500000. 2020-10-13 09:18:33 power_api.c:56:_get_avg_voltage: an6 raw = 2.567742, factor = 1.027097 2020-10-13 09:18:33 power_api.c:60:_get_avg_voltage: chain 2, an0 = 18.045227, an2 20.432161, an6 2.500000. 2020-10-13 09:18:33 power_api.c:85:_get_avg_voltage: average_voltage = 18.833673 2020-10-13 09:18:33 power_api.c:106:check_voltage: target_vol = 18.10, actural_vol = 18.83, check voltage passed. 2020-10-13 09:18:37 frequency.c:1132:inc_freq_with_fixed_step: chain = 1, freq_start = 725, freq_end = 735, freq_step = 5, is_higher_voltage = true 2020-10-13 09:18:37 driver-btm-api.c:1981:check_clock_counter_domain_last_core: freq 730 clock_counter_limit 23 2020-10-13 09:18:38 driver-btm-api.c:1981:check_clock_counter_domain_last_core: freq 735 clock_counter_limit 23 2020-10-13 09:18:40 frequency.c:1132:inc_freq_with_fixed_step: chain = 2, freq_start = 725, freq_end = 735, freq_step = 5, is_higher_voltage = true 2020-10-13 09:18:40 driver-btm-api.c:1981:check_clock_counter_domain_last_core: freq 730 clock_counter_limit 23 2020-10-13 09:18:42 driver-btm-api.c:1981:check_clock_counter_domain_last_core: freq 735 clock_counter_limit 23 2020-10-13 09:18:44 frequency.c:1132:inc_freq_with_fixed_step: chain = 1, freq_start = 735, freq_end = 740, freq_step = 5, is_higher_voltage = true 2020-10-13 09:18:44 driver-btm-api.c:1981:check_clock_counter_domain_last_core: freq 740 clock_counter_limit 23 2020-10-13 09:18:45 frequency.c:963:inc_asic_diff_freq_by_steps: chain = 0, start = 725, freq_step = 5 2020-10-13 09:18:48 frequency.c:963:inc_asic_diff_freq_by_steps: chain = 1, start = 740, freq_step = 5 2020-10-13 09:18:50 frequency.c:963:inc_asic_diff_freq_by_steps: chain = 2, start = 735, freq_step = 5 2020-10-13 09:18:51 driver-btm-api.c:704:set_timeout: freq 755 final timeout=97 2020-10-13 09:18:51 power_api.c:346:set_to_working_voltage_by_steps: Set to voltage raw 1760, step by step. 2020-10-13 09:19:07 power_api.c:120:check_voltage_multi: retry time: 0 2020-10-13 09:19:09 power_api.c:56:_get_avg_voltage: an6 raw = 2.567742, factor = 1.027097 2020-10-13 09:19:09 power_api.c:60:_get_avg_voltage: chain 0, an0 = 17.448493, an2 17.472362, an6 2.500000. 2020-10-13 09:19:10 power_api.c:56:_get_avg_voltage: an6 raw = 2.577419, factor = 1.030968 2020-10-13 09:19:10 power_api.c:60:_get_avg_voltage: chain 1, an0 = 17.525658, an2 17.549438, an6 2.500000. 2020-10-13 09:19:11 power_api.c:56:_get_avg_voltage: an6 raw = 2.570968, factor = 1.028387 2020-10-13 09:19:11 power_api.c:60:_get_avg_voltage: chain 2, an0 = 17.498119, an2 19.810541, an6 2.500000. 2020-10-13 09:19:11 power_api.c:85:_get_avg_voltage: average_voltage = 18.277447 2020-10-13 09:19:11 power_api.c:106:check_voltage: target_vol = 17.60, actural_vol = 18.28, check voltage passed. 2020-10-13 09:19:13 power_api.c:56:_get_avg_voltage: an6 raw = 2.567742, factor = 1.027097 2020-10-13 09:19:13 power_api.c:60:_get_avg_voltage: chain 0, an0 = 17.448493, an2 17.472362, an6 2.500000. 2020-10-13 09:19:14 power_api.c:56:_get_avg_voltage: an6 raw = 2.577419, factor = 1.030968 2020-10-13 09:19:14 power_api.c:60:_get_avg_voltage: chain 1, an0 = 17.525658, an2 17.549438, an6 2.500000. 2020-10-13 09:19:15 power_api.c:56:_get_avg_voltage: an6 raw = 2.570968, factor = 1.028387 2020-10-13 09:19:15 power_api.c:60:_get_avg_voltage: chain 2, an0 = 17.498119, an2 19.786702, an6 2.500000. 2020-10-13 09:19:15 power_api.c:85:_get_avg_voltage: average_voltage = 18.269500 2020-10-13 09:19:15 power_api.c:106:check_voltage: target_vol = 17.60, actural_vol = 18.27, check voltage passed. 2020-10-13 09:19:15 thread.c:1176:create_check_system_status_thread: create thread 2020-10-13 09:19:15 driver-btm-api.c:2719:bitmain_soc_init: Init done! 2020-10-13 09:19:15 driver-btm-api.c:216:set_miner_status: STATUS_INIT 2020-10-13 09:19:20 driver-btm-api.c:216:set_miner_status: STATUS_OKAY 2020-10-13 09:19:21 frequency.c:306:get_sale_hash_rate_GH: g_sale_hash_rate = 64000 2020-10-13 09:19:25 driver-btm-api.c:1500:dhash_chip_send_job: Version num 4. 2020-10-13 09:19:25 driver-btm-api.c:1647:dhash_chip_send_job: stime.tv_sec 1602580765, block_ntime 1602580761 2020-10-13 09:49:26 thread.c:252:calc_hashrate_avg: avg rate is 65626.79 in 30 mins 2020-10-13 09:49:26 temperature.c:529:temp_statistics_show: pcb temp 31~50 chip temp 56~80 2020-10-13 10:19:27 thread.c:252:calc_hashrate_avg: avg rate is 65417.89 in 30 mins 2020-10-13 10:19:27 temperature.c:529:temp_statistics_show: pcb temp 31~50 chip temp 56~80 2020-10-13 10:23:15 thread.c:1068:asic_status_monitor_thread: ERROR: chain 2 get hashrate_reg_counter 0, require 44, failed times 1 2020-10-13 10:23:16 thread.c:1096:asic_status_monitor_thread: chain 2 can't get enough hashrate reg val for 0 times. 2020-10-13 10:23:16 temperature.c:919:get_temp_info: read temp sensor failed: chain = 2, sensor = 0, chip = 55, reg = 0 2020-10-13 10:23:17 thread.c:1068:asic_status_monitor_thread: ERROR: chain 2 get hashrate_reg_counter 0, require 44, failed times 1 2020-10-13 10:23:17 temperature.c:919:get_temp_info: read temp sensor failed: chain = 2, sensor = 0, chip = 55, reg = 1 2020-10-13 10:23:17 temperature.c:919:get_temp_info: read temp sensor failed: chain = 2, sensor = 1, chip = 40, reg = 0 2020-10-13 10:23:18 temperature.c:919:get_temp_info: read temp sensor failed: chain = 2, sensor = 1, chip = 40, reg = 1 2020-10-13 10:23:18 temperature.c:919:get_temp_info: read temp sensor failed: chain = 2, sensor = 2, chip = 175, reg = 0 2020-10-13 10:23:18 temperature.c:919:get_temp_info: read temp sensor failed: chain = 2, sensor = 2, chip = 175, reg = 1 2020-10-13 10:23:18 thread.c:1096:asic_status_monitor_thread: chain 2 can't get enough hashrate reg val for 1 times. 2020-10-13 10:23:19 temperature.c:919:get_temp_info: read temp sensor failed: chain = 2, sensor = 3, chip = 160, reg = 0 2020-10-13 10:23:19 thread.c:1068:asic_status_monitor_thread: ERROR: chain 2 get hashrate_reg_counter 0, require 44, failed times 1 2020-10-13 10:23:19 temperature.c:919:get_temp_info: read temp sensor failed: chain = 2, sensor = 3, chip = 160, reg = 1 2020-10-13 10:23:19 temperature.c:946:get_temp_info: ERROR: chain 2 can get NONE temp info or temp value abnormal, power it off 2020-10-13 10:23:20 thread.c:1096:asic_status_monitor_thread: chain 2 can't get enough hashrate reg val for 2 times. 2020-10-13 10:23:21 thread.c:1068:asic_status_monitor_thread: ERROR: chain 2 get hashrate_reg_counter 0, require 44, failed times 1 2020-10-13 10:23:22 thread.c:1096:asic_status_monitor_thread: chain 2 can't get enough hashrate reg val for 3 times. 2020-10-13 10:23:23 thread.c:1068:asic_status_monitor_thread: ERROR: chain 2 get hashrate_reg_counter 0, require 44, failed times 1 2020-10-13 10:23:24 thread.c:1096:asic_status_monitor_thread: chain 2 can't get enough hashrate reg val for 4 times. 2020-10-13 10:23:25 thread.c:1068:asic_status_monitor_thread: ERROR: chain 2 get hashrate_reg_counter 0, require 44, failed times 1 2020-10-13 10:23:26 thread.c:1096:asic_status_monitor_thread: chain 2 can't get enough hashrate reg val for 5 times. 2020-10-13 10:23:27 thread.c:1068:asic_status_monitor_thread: ERROR: chain 2 get hashrate_reg_counter 0, require 44, failed times 1 2020-10-13 10:23:28 frequency.c:306:get_sale_hash_rate_GH: g_sale_hash_rate = 40704 2020-10-13 10:23:32 thread.c:153:pic_heart_beat_thread: chain[2] heart beat fail 1 times.

  0

  Comment actions Permalink
• 

  Mariadiz084

  • November 07, 2020 22:52

  The same issue T17

   

  2020-11-07 22:52:04 temperature.c:697:get_temp_info: read temp sensor failed: chain = 0, sensor = 0, chip = 64, reg = 0

   

  Please, help. 

  Email: alexander_siaut@hotmail.com

   

  0

  Comment actions Permalink
• 

  andreytaranov

  • November 23, 2020 00:23
  • Edited

  Im having the same issue. Can you send me the sd card file? I have the S17+ 73th.

  cryptollc@outlook.com

  0

  Comment actions Permalink

Please sign in to leave a comment.