s9 HASH BOARD TESTER FIX UNWORKING

Comments

30 comments

  • Official comment

    Dear

    Please download the SD card file in the below link

    https://service.bitmain.com/support/download?product=Flashing%20SD%20card%20with%20image

    And sorry we have no repair documents which you can consult with our training colleague for the maintenance information .

    Here is the Ant Training Academy Link for you: https://support.bitmain.com/hc/en-us/sections/360004784574-Ant-Training-Academy

    Please also can contact  training@bitmain.com .for further 

    Comment actions Permalink

    hi

    now

    i have this problem with my tester

    what can i do??

    where is it sdrecovery file ???

    thanks

    1
    Comment actions Permalink

    Please help me, send me both the maintenance document and SD recovery image to you. and you can try again. of the ZJ0001000001

    1
    Comment actions Permalink

    Hi,Fabien

    Please kindly refer to the steps in the link for operation and inspection:

    https://support.bitmain.com/hc/en-us/articles/360012873213

    In addition, the pixels of uploaded picture is too low. May I know what software is on your laptop? thank you!

    0
    Comment actions Permalink

    yes it's the link i follow to connect my hash board but there is no information on my laptop wich is send by the hash test module;

    my PC is running on windows 10 but i tried on windows Xp, the same result..

    other pictures in attachment

    thanks

    0
    Comment actions Permalink

    i allready check USB-TTL converter, connecting is OK with right informations TX/RX/GND

    0
    Comment actions Permalink

    Computer juste show "
    Connecting to com6
    Connected.
    "

    0
    Comment actions Permalink

    An Idea? Please.....

    0
    Comment actions Permalink

    Hi,Fabien

    Sorry, I just saw your messages because we are having the public holiday in China.

    Have you ever tried the software "SecureCRT" ,which is recommended in the link?

    and what is the brand and model of the USB-TTL converter?

    0
    Comment actions Permalink

    Thanks.
    I tried with securecrt but same result...
    Converter is a prolific,

    Maybe the software on the sd card is Bad or missing files ?

    0
    Comment actions Permalink

    0
    Comment actions Permalink

    Yes,that was the balance of probability, at any rate. If you need, please leave me your email and I will send you both the maintenance document and SD recovery image to you. and you can try again.

    0
    Comment actions Permalink

    thanks! nuclearman@free.fr

    0
    Comment actions Permalink

    The mail has been sent, please check it later.

    0
    Comment actions Permalink

    Thank you. What is the différence beetween the 2 files ?

    0
    Comment actions Permalink

    First,use the SD card recovery image to flash the control board of the tester,then download the maintenance document to the control board of the tester. the SD card recovery image is for recovering the control board,the maintenance document is the software for testing the hashboard.

    0
    Comment actions Permalink

    i put the files " SD card recovery image" on a sd card then restart the control board, plug an ethernet cable then i don't know how to recovering control board...

    i can't find ip adress of the control board

    0
    Comment actions Permalink

    Hi,Fabien

    For SD card recovery,please refer to this link: https://support.bitmain.com/hc/en-us/articles/360019493654

     

    0
    Comment actions Permalink

    can't fin JP4 switch, ly card is a ctrl-CR43 v1.0... not the same as the link

    is the config in securecrt correct ?

    0
    Comment actions Permalink

    Yes,your configuration is correct...

    you mean the model of the tester's control board is CRT0301?

    0
    Comment actions Permalink

    This model

    0
    Comment actions Permalink

    OK,got it,I will follow up on this issue. and are you sure this is how you connected: TX---RX,RX---TX,GND---GND?

    0
    Comment actions Permalink

    oups... really thanks! that was the problem, now its OK!

    start my first test, can you help me to read the result ?

     

     

    .---O---.
    | | .-. o o
    | | |-----.-----.-----.| | .----..-----.-----.
    | | | __ | ---'| '--.| .-'| | |
    | | | | | |--- || --'| | | ' | | | |
    '---'---'--'--'--. |-----''----''--' '-----'-'-'-'
    -' |
    '---'

    The Angstrom Distribution antMiner ttyPS0

    Angstrom v2013.06 - Kernel 4.6.0-xilinx-g99349d0-dirty

    antMiner login:

    --- key down:
    --- singleBoardTest_S9_BM1387_63


    --- get time
    Socket initialisation ok
    get_time: Start set system date
    Set system datatime ok!
    UTC time is : Wed May 18 18:36:12 2016

    change_time_format: year = 0x16
    change_time_format: month = 0x05
    change_time_format: day = 0x18
    change_time_format: hour = 0x18
    change_time_format: minute = 0x36
    change_time_format: second = 0x12

    begin test time
    Wed May 18 18:36:12 UTC 2016

    --- init_fpga

    --- read_id


    --- FPGA chip id: low: 0x69208814, high: 0x8018f524
    ts.tv_sec = 0x573cb61c
    ts.tv_usec = 0x000a7eeb
    rand_num = 0x00000033
    --- read_id: hash_board_id[0] = 0x69
    --- read_id: hash_board_id[1] = 0x20
    --- read_id: hash_board_id[2] = 0x88
    --- read_id: hash_board_id[3] = 0x14
    --- read_id: hash_board_id[4] = 0x57
    --- read_id: hash_board_id[5] = 0x3c
    --- read_id: hash_board_id[6] = 0xb6
    --- read_id: hash_board_id[7] = 0x1c
    --- read_id: hash_board_id[8] = 0x33
    --- read_id: hash_board_id[9] = 0x0a
    --- read_id: hash_board_id[10] = 0x7e
    --- read_id: hash_board_id[11] = 0xeb

    --- check_chain
    get_hash_on_plug: HASH_ON_PLUG is 0x1
    check_chain: gChain = 0
    reset_iic_pic
    jump_to_app_from_loader

    --- set_hash_board_id_number
    --- send pic heart beat ...

    --- set pic voltage
    conf.Pic = 1
    conf.IICPic = 1
    conf.dac = 1
    temp_voltage = 91.651323
    set_pic_voltage
    set_Hash_board_voltage_BM1387_63: conf.Voltage1 = 890
    set_Hash_board_voltage_BM1387_63: pic_voltage1 = 91

    --- enable_pic_dac
    --- reset_hash_board

    --- set command mode
    get_dhash_acc_control: DHASH_ACC_CONTROL is 0x20
    set_dhash_acc_control: set DHASH_ACC_CONTROL is 0x8100
    get_dhash_acc_control: DHASH_ACC_CONTROL is 0x8100
    set command mode to VIL

    singleBoardTest_S9_BM1387_63: AsicType = 1387

    singleBoardTest_S9_BM1387_63: asicNum = 64

    singleBoardTest_S9_BM1387_63: real AsicNum = 63

    --- check asic number
    check_asic_reg: check chain J1
    check_asic_reg: no asic address register come back for 1 time.
    check_asic_reg: no asic address register come back for 2 time.
    check_asic_reg: no asic address register come back for 3 time.
    check_asic_reg: chain J1 has 63 ASIC
    check chain: asicNum = 63

    double check ASIC number

    --- set_baud
    set_baud: cmd_buf[0]=0x5809001c, cmd_buf[1]=0x40200000, cmd_buf[2]=0x17000000
    set_baud: system baudrate is: 0x0
    --- init_fpga
    --- reset_hash_board
    --- send pic heart beat ...

    --- set command mode
    get_dhash_acc_control: DHASH_ACC_CONTROL is 0x20
    set_dhash_acc_control: set DHASH_ACC_CONTROL is 0x8100
    get_dhash_acc_control: DHASH_ACC_CONTROL is 0x8100
    set command mode to VIL

    --- check asic number
    check_asic_reg: check chain J1
    check_asic_reg: no asic address register come back for 1 time.
    check_asic_reg: no asic address register come back for 2 time.
    check_asic_reg: no asic address register come back for 3 time.
    check_asic_reg: chain J1 has 63 ASIC
    check chain: asicNum = 63
    double check ASIC number end

    singleBoardTest_S9_BM1387_63: core_num = 114

    singleBoardTest_S9_BM1387_63: ValidNonce1 = 57456

    --- set_frequency
    get_plldata: i = 22, sizeof(freq_pll_1385)/sizeof(freq_pll_1385[0]) = 124
    Freq 400, PLL1 00080040, PLL2 0420, vilpll 800241
    PLL1 0x80040, PLL2 0x420, vilpll 0x800241
    set_frequency: frequency = 400
    set_frequency: cmd_buf[0] = 0x5809000c, cmd_buf[1] = 0x800241, cmd_buf[2] = 0x8000000

    --- software_set_address
    software_set_address: cgpu.addrInterval = 4
    software_set_address: chain 0 has 63 ASIC, and addrInterval is 4
    chain_inactive: buf[0]=0x55, buf[1]=0x5, buf[2]=0x0, buf[3]=0x0, buf[4]=0x10

    --- enable_extended_mode_of_temperature_sensor
    read_temperature_time = 1, ret = 0x01000000
    enable_extended_mode_of_temperature_sensor: Can't set extended mode. ret = 0x41980900

    --- write_sensor_info_into_pic

    --- set_temperature_offset_value
    singleBoardTest_S9_BM1387_63: conf.baud = 0

    --- set_baud
    set_baud: cmd_buf[0]=0x5809001c, cmd_buf[1]=0x40200000, cmd_buf[2]=0x17000000
    set_baud: system baudrate is: 0x0

    --- set timeout 50000
    set_time_out_control: set TIME_OUT_CONTROL is 0xc350
    get_time_out_control: TIME_OUT_CONTROL is 0xc350

    --- open_core
    get_dhash_acc_control: DHASH_ACC_CONTROL is 0x8100
    set_dhash_acc_control: set DHASH_ACC_CONTROL is 0x8100
    get_dhash_acc_control: DHASH_ACC_CONTROL is 0x8100
    set_hash_counting_number: set DHASH_ACC_CONTROL is 0x0
    get_hash_counting_number: DHASH_ACC_CONTROL is 0x0
    open_core: Conf.CoreNum = 114
    open_core: gateblk: cmd_buf[0] = 0x5809001c, cmd_buf[1] = 0x40208080, cmd_buf[2] = 0x15000000
    disable null work: ret = 0x00800000
    enable null work: ret = 0x00c00000, loop = 114
    --- open_core end

    --- set real timeout 458
    set_time_out_control: set TIME_OUT_CONTROL is 0x1ca
    get_time_out_control: TIME_OUT_CONTROL is 0x1ca

    Begin send test pattern
    Wed May 18 18:36:32 UTC 2016

    ASIC 62 Hash Board temperature is 191, ASIC temperature is 219


    Begin test!!! Start sensor is 62, ASIC temperature is 219


    gGlobalHighestTemp is 219

    --- send pic heart beat ...
    ASIC 62 Hash Board temperature is 191, ASIC temperature is 219


    gGlobalHighestTemp is 219

    ASIC 62 Hash Board temperature is 191, ASIC temperature is 219


    gGlobalHighestTemp is 219

    get send work num :7182
    send_func: number = 63, conf.dataCount = 114, Conf.pattern_repeat_num = 1

    send test pattern done
    Wed May 18 18:36:36 UTC 2016

    ASIC 62 Hash Board temperature is 191, ASIC temperature is 219


    gGlobalHighestTemp is 219

    ASIC 62 Hash Board temperature is 191, ASIC temperature is 219


    gGlobalHighestTemp is 219

    to stop receive

    ------------------------------------------------------------------------------------------------------
    Command mode is VIL
    require nonce number:114
    asic[00]=113 asic[01]=114 asic[02]=114 asic[03]=113 asic[04]=113 asic[05]=114 asic[06]=113 asic[07]=114
    asic[08]=113 asic[09]=114 asic[10]=113 asic[11]=113 asic[12]=113 asic[13]=114 asic[14]=114 asic[15]=114
    asic[16]=113 asic[17]=114 asic[18]=113 asic[19]=114 asic[20]=114 asic[21]=114 asic[22]=114 asic[23]=114
    asic[24]=114 asic[25]=113 asic[26]=113 asic[27]=113 asic[28]=113 asic[29]=113 asic[30]=113 asic[31]=113
    asic[32]=114 asic[33]=114 asic[34]=113 asic[35]=114 asic[36]=113 asic[37]=114 asic[38]=113 asic[39]=113
    asic[40]=114 asic[41]=113 asic[42]=113 asic[43]=114 asic[44]=114 asic[45]=114 asic[46]=114 asic[47]=114
    asic[48]=113 asic[49]=112 asic[50]=113 asic[51]=114 asic[52]=113 asic[53]=114 asic[54]=112 asic[55]=113
    asic[56]=114 asic[57]=114 asic[58]=114 asic[59]=114 asic[60]=114 asic[61]=113 asic[62]=113


    Below ASIC's core didn't receive all the nonce, they should receive 1 nonce each!

    asic[00]=113
    core[085]=00


    asic[03]=113
    core[026]=00


    asic[04]=113
    core[062]=00


    asic[06]=113
    core[092]=00


    asic[08]=113
    core[025]=00


    asic[10]=113
    core[105]=00


    asic[11]=113
    core[025]=00


    asic[12]=113
    core[099]=00


    asic[16]=113
    core[110]=00


    asic[18]=113
    core[100]=00


    asic[25]=113
    core[006]=00


    asic[26]=113
    core[102]=00


    asic[27]=113
    core[107]=00


    asic[28]=113
    core[011]=00


    asic[29]=113
    core[018]=00


    asic[30]=113
    core[077]=00


    asic[31]=113
    core[079]=00


    asic[34]=113
    core[005]=00


    asic[36]=113
    core[010]=00


    asic[38]=113
    core[000]=00


    asic[39]=113
    core[074]=00


    asic[41]=113
    core[049]=00


    asic[42]=113
    core[103]=00


    asic[48]=113
    core[103]=00


    asic[49]=112
    core[015]=00 core[045]=00


    asic[50]=113
    core[066]=00


    asic[52]=113
    core[113]=00


    asic[54]=112
    core[106]=00 core[107]=00


    asic[55]=113
    core[102]=00


    asic[61]=113
    core[031]=00


    asic[62]=113
    core[043]=00

     

     

    ------------------------------------------------------------------------------------------------------

    temperature1 check error
    total valid nonce number:7149
    total send work number:7182
    require valid nonce number:7182
    test pattern result = 0x00000001
    test pattern valid_nonce_num = 7149
    To do the real test

    Begin send pattern again
    Wed May 18 18:36:38 UTC 2016

    ASIC 62 Hash Board temperature is 191, ASIC temperature is 219


    gGlobalHighestTemp is 219

    ASIC 62 Hash Board temperature is 191, ASIC temperature is 219


    gGlobalHighestTemp is 219

    ASIC 62 Hash Board temperature is 191, ASIC temperature is 219


    gGlobalHighestTemp is 219

    ASIC 62 Hash Board temperature is 191, ASIC temperature is 219


    gGlobalHighestTemp is 219

    ASIC 62 Hash Board temperature is 191, ASIC temperature is 219


    gGlobalHighestTemp is 219

    read_asic_temperature_TMP421_TMP431: do not read out ASIC 62 Hash Board & ASIC temperature. ret = 0x419800ff


    gGlobalHighestTemp is 219

    --- send pic heart beat ...
    read_asic_temperature_TMP421_TMP431: do not read out ASIC 62 Hash Board & ASIC temperature. ret = 0x419800ff


    gGlobalHighestTemp is 219

    read_asic_temperature_TMP421_TMP431: do not read out ASIC 62 Hash Board & ASIC temperature. ret = 0x419800ff


    gGlobalHighestTemp is 219

    read_asic_temperature_TMP421_TMP431: do not read out ASIC 62 Hash Board & ASIC temperature. ret = 0x419800ff


    gGlobalHighestTemp is 219

    read_asic_temperature_TMP421_TMP431: do not read out ASIC 62 Hash Board & ASIC temperature. ret = 0x419800ff


    gGlobalHighestTemp is 219

    read_asic_temperature_TMP421_TMP431: do not read out ASIC 62 Hash Board & ASIC temperature. ret = 0x419800ff


    gGlobalHighestTemp is 219

    read_asic_temperature_TMP421_TMP431: do not read out ASIC 62 Hash Board & ASIC temperature. ret = 0x419800ff


    gGlobalHighestTemp is 219

    read_asic_temperature_TMP421_TMP431: do not read out ASIC 62 Hash Board & ASIC temperature. ret = 0x419800ff


    gGlobalHighestTemp is 219

    read_asic_temperature_TMP421_TMP431: do not read out ASIC 62 Hash Board & ASIC temperature. ret = 0x419800ff


    gGlobalHighestTemp is 219

    read_asic_temperature_TMP421_TMP431: do not read out ASIC 62 Hash Board & ASIC temperature. ret = 0x419800ff


    gGlobalHighestTemp is 219

    --- send pic heart beat ...
    read_asic_temperature_TMP421_TMP431: do not read out ASIC 62 Hash Board & ASIC temperature. ret = 0x419800ff


    gGlobalHighestTemp is 219

    read_asic_temperature_TMP421_TMP431: do not read out ASIC 62 Hash Board & ASIC temperature. ret = 0x419800ff


    gGlobalHighestTemp is 219

    read_asic_temperature_TMP421_TMP431: do not read out ASIC 62 Hash Board & ASIC temperature. ret = 0x419800ff


    gGlobalHighestTemp is 219

    read_asic_temperature_TMP421_TMP431: do not read out ASIC 62 Hash Board & ASIC temperature. ret = 0x419800ff


    gGlobalHighestTemp is 219

    read_asic_temperature_TMP421_TMP431: do not read out ASIC 62 Hash Board & ASIC temperature. ret = 0x419800ff


    gGlobalHighestTemp is 219

    read_asic_temperature_TMP421_TMP431: do not read out ASIC 62 Hash Board & ASIC temperature. ret = 0x419800ff


    gGlobalHighestTemp is 219

    read_asic_temperature_TMP421_TMP431: do not read out ASIC 62 Hash Board & ASIC temperature. ret = 0x419800ff


    gGlobalHighestTemp is 219

    read_asic_temperature_TMP421_TMP431: do not read out ASIC 62 Hash Board & ASIC temperature. ret = 0x419800ff


    gGlobalHighestTemp is 219

    read_asic_temperature_TMP421_TMP431: do not read out ASIC 62 Hash Board & ASIC temperature. ret = 0x419800ff


    gGlobalHighestTemp is 219

    --- send pic heart beat ...
    read_asic_temperature_TMP421_TMP431: do not read out ASIC 62 Hash Board & ASIC temperature. ret = 0x419800ff


    gGlobalHighestTemp is 219

    read_asic_temperature_TMP421_TMP431: do not read out ASIC 62 Hash Board & ASIC temperature. ret = 0x419800ff


    gGlobalHighestTemp is 219

    get send work num :57456
    send_func: number = 63, conf.dataCount = 912, Conf.pattern_repeat_num = 1

    send test pattern done
    Wed May 18 18:37:05 UTC 2016

    read_asic_temperature_TMP421_TMP431: do not read out ASIC 62 Hash Board & ASIC temperature. ret = 0x419800ff


    gGlobalHighestTemp is 219

    read_asic_temperature_TMP421_TMP431: do not read out ASIC 62 Hash Board & ASIC temperature. ret = 0x419800ff


    gGlobalHighestTemp is 219

    to stop receive

    ------------------------------------------------------------------------------------------------------
    Command mode is VIL
    require nonce number:912
    asic[00]=908 asic[01]=909 asic[02]=908 asic[03]=907 asic[04]=910 asic[05]=910 asic[06]=907 asic[07]=907
    asic[08]=908 asic[09]=910 asic[10]=906 asic[11]=909 asic[12]=910 asic[13]=904 asic[14]=910 asic[15]=912
    asic[16]=909 asic[17]=911 asic[18]=906 asic[19]=908 asic[20]=911 asic[21]=911 asic[22]=910 asic[23]=910
    asic[24]=910 asic[25]=909 asic[26]=908 asic[27]=904 asic[28]=906 asic[29]=908 asic[30]=909 asic[31]=907
    asic[32]=911 asic[33]=909 asic[34]=909 asic[35]=907 asic[36]=910 asic[37]=912 asic[38]=908 asic[39]=900
    asic[40]=911 asic[41]=908 asic[42]=908 asic[43]=909 asic[44]=911 asic[45]=909 asic[46]=909 asic[47]=908
    asic[48]=908 asic[49]=907 asic[50]=909 asic[51]=910 asic[52]=909 asic[53]=912 asic[54]=900 asic[55]=906
    asic[56]=905 asic[57]=907 asic[58]=908 asic[59]=909 asic[60]=910 asic[61]=907 asic[62]=904


    Below ASIC's core didn't receive all the nonce, they should receive 8 nonce each!

    asic[00]=908
    core[085]=04


    asic[01]=909
    core[057]=05


    asic[02]=908
    core[009]=04


    asic[03]=907
    core[026]=03


    asic[04]=910
    core[062]=06


    asic[05]=910
    core[034]=06


    asic[06]=907
    core[092]=03


    asic[07]=907
    core[083]=03


    asic[08]=908
    core[025]=04


    asic[09]=910
    core[042]=06


    asic[10]=906
    core[105]=02


    asic[11]=909
    core[025]=05


    asic[12]=910
    core[099]=06


    asic[13]=904
    core[010]=05 core[078]=03


    asic[14]=910
    core[043]=06


    asic[16]=909
    core[110]=05


    asic[17]=911
    core[084]=07


    asic[18]=906
    core[100]=02


    asic[19]=908
    core[044]=04


    asic[20]=911
    core[071]=07


    asic[21]=911
    core[104]=07


    asic[22]=910
    core[091]=06


    asic[23]=910
    core[059]=06


    asic[24]=910
    core[058]=06


    asic[25]=909
    core[006]=05


    asic[26]=908
    core[102]=04


    asic[27]=904
    core[107]=00


    asic[28]=906
    core[011]=02


    asic[29]=908
    core[018]=04


    asic[30]=909
    core[077]=05


    asic[31]=907
    core[079]=03


    asic[32]=911
    core[023]=07


    asic[33]=909
    core[093]=05


    asic[34]=909
    core[005]=05


    asic[35]=907
    core[086]=03


    asic[36]=910
    core[010]=06


    asic[38]=908
    core[000]=04


    asic[39]=900
    core[074]=02 core[080]=02


    asic[40]=911
    core[071]=07


    asic[41]=908
    core[049]=04


    asic[42]=908
    core[103]=04


    asic[43]=909
    core[080]=07 core[082]=06


    asic[44]=911
    core[042]=07


    asic[45]=909
    core[083]=05


    asic[46]=909
    core[030]=05


    asic[47]=908
    core[096]=04


    asic[48]=908
    core[103]=04


    asic[49]=907
    core[015]=05 core[045]=06


    asic[50]=909
    core[066]=05


    asic[51]=910
    core[105]=06


    asic[52]=909
    core[113]=05


    asic[54]=900
    core[106]=01 core[107]=03


    asic[55]=906
    core[102]=03 core[110]=07


    asic[56]=905
    core[007]=07 core[042]=02


    asic[57]=907
    core[084]=03


    asic[58]=908
    core[023]=04


    asic[59]=909
    core[006]=05


    asic[60]=910
    core[032]=06


    asic[61]=907
    core[031]=03


    asic[62]=904
    core[043]=00

     

     

    ------------------------------------------------------------------------------------------------------

    temperature1 check error
    total valid nonce number:57222
    total send work number:57456
    require valid nonce number:57456
    result = 0x00000001
    crc_error_cnt = 0x00000000


    ----------------------------------- test result -----------------------------------

    Level: 1

    Sensor NG

    The highest temperature(219 `c) is higher than AlarmTemp(85 `C)

    pattern_test_time = 0

    Pattern OK

    ----------------------------------- test result end -------------------------------

     

    test done time
    Wed May 18 18:37:08 UTC 2016


    --- disable_pic_dac
    --- init_fpga

    .---O---.
    | | .-. o o
    | | |-----.-----.-----.| | .----..-----.-----.
    | | | __ | ---'| '--.| .-'| | |
    | | | | | |--- || --'| | | ' | | | |
    '---'---'--'--'--. |-----''----''--' '-----'-'-'-'
    -' |
    '---'

    The Angstrom Distribution antMiner ttyPS0

    Angstrom v2013.06 - Kernel 4.6.0-xilinx-g99349d0-dirty

    antMiner login:

    0
    Comment actions Permalink

    The temperature is too high,Did you use a fan to cool the hashboard during the test?

    0
    Comment actions Permalink

    OK redo test with hashboard directly in S9 box with 2 fans:

     

    Xshell 6 (Build 0184)
    Copyright (c) 2002 NetSarang Computer, Inc. All rights reserved.

    Type `help' to learn how to use Xshell prompt.
    [C:\~]$

    Connecting to COM6...
    Connected.

     

    --- key down:
    --- singleBoardTest_S9_BM1387_63


    --- get time
    Socket initialisation ok
    UTC time is : Wed May 18 18:40:30 2016

    change_time_format: year = 0x16
    change_time_format: month = 0x05
    change_time_format: day = 0x18
    change_time_format: hour = 0x18
    change_time_format: minute = 0x40
    change_time_format: second = 0x30

    begin test time
    Wed May 18 18:40:30 UTC 2016

    --- init_fpga

    --- read_id


    --- FPGA chip id: low: 0x69208814, high: 0x8018f524
    ts.tv_sec = 0x573cb71f
    ts.tv_usec = 0x0009889c
    rand_num = 0x0000005d
    --- read_id: hash_board_id[0] = 0x69
    --- read_id: hash_board_id[1] = 0x20
    --- read_id: hash_board_id[2] = 0x88
    --- read_id: hash_board_id[3] = 0x14
    --- read_id: hash_board_id[4] = 0x57
    --- read_id: hash_board_id[5] = 0x3c
    --- read_id: hash_board_id[6] = 0xb7
    --- read_id: hash_board_id[7] = 0x1f
    --- read_id: hash_board_id[8] = 0x5d
    --- read_id: hash_board_id[9] = 0x09
    --- read_id: hash_board_id[10] = 0x88
    --- read_id: hash_board_id[11] = 0x9c

    --- check_chain
    get_hash_on_plug: HASH_ON_PLUG is 0x1
    check_chain: gChain = 0
    reset_iic_pic
    jump_to_app_from_loader

    --- set_hash_board_id_number
    --- send pic heart beat ...

    --- set pic voltage
    conf.Pic = 1
    conf.IICPic = 1
    conf.dac = 1
    temp_voltage = 91.651323
    set_pic_voltage
    set_Hash_board_voltage_BM1387_63: conf.Voltage1 = 890
    set_Hash_board_voltage_BM1387_63: pic_voltage1 = 91

    --- enable_pic_dac
    --- reset_hash_board

    --- set command mode
    get_dhash_acc_control: DHASH_ACC_CONTROL is 0x20
    set_dhash_acc_control: set DHASH_ACC_CONTROL is 0x8100
    get_dhash_acc_control: DHASH_ACC_CONTROL is 0x8100
    set command mode to VIL

    singleBoardTest_S9_BM1387_63: AsicType = 1387

    singleBoardTest_S9_BM1387_63: asicNum = 64

    singleBoardTest_S9_BM1387_63: real AsicNum = 63

    --- check asic number
    check_asic_reg: check chain J1
    check_asic_reg: no asic address register come back for 1 time.
    check_asic_reg: no asic address register come back for 2 time.
    check_asic_reg: no asic address register come back for 3 time.
    check_asic_reg: chain J1 has 63 ASIC
    check chain: asicNum = 63

    double check ASIC number

    --- set_baud
    set_baud: cmd_buf[0]=0x5809001c, cmd_buf[1]=0x40200000, cmd_buf[2]=0x17000000
    set_baud: system baudrate is: 0x0
    --- init_fpga
    --- reset_hash_board
    --- send pic heart beat ...

    --- set command mode
    get_dhash_acc_control: DHASH_ACC_CONTROL is 0x20
    set_dhash_acc_control: set DHASH_ACC_CONTROL is 0x8100
    get_dhash_acc_control: DHASH_ACC_CONTROL is 0x8100
    set command mode to VIL

    --- check asic number
    check_asic_reg: check chain J1
    check_asic_reg: no asic address register come back for 1 time.
    check_asic_reg: no asic address register come back for 2 time.
    check_asic_reg: no asic address register come back for 3 time.
    check_asic_reg: chain J1 has 63 ASIC
    check chain: asicNum = 63
    double check ASIC number end

    singleBoardTest_S9_BM1387_63: core_num = 114

    singleBoardTest_S9_BM1387_63: ValidNonce1 = 57456

    --- set_frequency
    get_plldata: i = 22, sizeof(freq_pll_1385)/sizeof(freq_pll_1385[0]) = 124
    Freq 400, PLL1 00080040, PLL2 0420, vilpll 800241
    PLL1 0x80040, PLL2 0x420, vilpll 0x800241
    set_frequency: frequency = 400
    set_frequency: cmd_buf[0] = 0x5809000c, cmd_buf[1] = 0x800241, cmd_buf[2] = 0x8000000

    --- software_set_address
    software_set_address: cgpu.addrInterval = 4
    software_set_address: chain 0 has 63 ASIC, and addrInterval is 4
    chain_inactive: buf[0]=0x55, buf[1]=0x5, buf[2]=0x0, buf[3]=0x0, buf[4]=0x10

    --- enable_extended_mode_of_temperature_sensor
    read_temperature_time = 1, ret = 0x01000000

    --- write_sensor_info_into_pic

    --- set_temperature_offset_value
    singleBoardTest_S9_BM1387_63: conf.baud = 0

    --- set_baud
    set_baud: cmd_buf[0]=0x5809001c, cmd_buf[1]=0x40200000, cmd_buf[2]=0x17000000
    set_baud: system baudrate is: 0x0

    --- set timeout 50000
    set_time_out_control: set TIME_OUT_CONTROL is 0xc350
    get_time_out_control: TIME_OUT_CONTROL is 0xc350

    --- open_core
    get_dhash_acc_control: DHASH_ACC_CONTROL is 0x8100
    set_dhash_acc_control: set DHASH_ACC_CONTROL is 0x8100
    get_dhash_acc_control: DHASH_ACC_CONTROL is 0x8100
    set_hash_counting_number: set DHASH_ACC_CONTROL is 0x0
    get_hash_counting_number: DHASH_ACC_CONTROL is 0x0
    open_core: Conf.CoreNum = 114
    open_core: gateblk: cmd_buf[0] = 0x5809001c, cmd_buf[1] = 0x40208080, cmd_buf[2] = 0x15000000
    disable null work: ret = 0x00800000
    enable null work: ret = 0x00c00000, loop = 114
    --- open_core end

    --- set real timeout 458
    set_time_out_control: set TIME_OUT_CONTROL is 0x1ca
    get_time_out_control: TIME_OUT_CONTROL is 0x1ca

    Begin send test pattern
    Wed May 18 18:40:51 UTC 2016

    ASIC 62 Hash Board temperature is 191, ASIC temperature is 219


    Begin test!!! Start sensor is 62, ASIC temperature is 219


    gGlobalHighestTemp is 219

    --- send pic heart beat ...
    ASIC 62 Hash Board temperature is 191, ASIC temperature is 219


    gGlobalHighestTemp is 219

    ASIC 62 Hash Board temperature is 191, ASIC temperature is 219


    gGlobalHighestTemp is 219

    get send work num :7182
    send_func: number = 63, conf.dataCount = 114, Conf.pattern_repeat_num = 1

    send test pattern done
    Wed May 18 18:40:54 UTC 2016

    ASIC 62 Hash Board temperature is 191, ASIC temperature is 219


    gGlobalHighestTemp is 219

    read_asic_temperature_TMP421_TMP431: do not read out ASIC 62 Hash Board & ASIC temperature. ret = 0x419800ff


    gGlobalHighestTemp is 219

    to stop receive

    ------------------------------------------------------------------------------------------------------
    Command mode is VIL
    require nonce number:114
    asic[00]=113 asic[01]=114 asic[02]=114 asic[03]=113 asic[04]=113 asic[05]=114 asic[06]=113 asic[07]=114
    asic[08]=113 asic[09]=114 asic[10]=113 asic[11]=113 asic[12]=113 asic[13]=114 asic[14]=114 asic[15]=114
    asic[16]=113 asic[17]=114 asic[18]=113 asic[19]=114 asic[20]=114 asic[21]=114 asic[22]=114 asic[23]=114
    asic[24]=114 asic[25]=113 asic[26]=113 asic[27]=113 asic[28]=113 asic[29]=113 asic[30]=113 asic[31]=113
    asic[32]=114 asic[33]=114 asic[34]=113 asic[35]=114 asic[36]=113 asic[37]=114 asic[38]=113 asic[39]=113
    asic[40]=114 asic[41]=113 asic[42]=113 asic[43]=114 asic[44]=114 asic[45]=114 asic[46]=114 asic[47]=114
    asic[48]=113 asic[49]=112 asic[50]=113 asic[51]=114 asic[52]=113 asic[53]=114 asic[54]=112 asic[55]=113
    asic[56]=114 asic[57]=114 asic[58]=114 asic[59]=114 asic[60]=114 asic[61]=113 asic[62]=113


    Below ASIC's core didn't receive all the nonce, they should receive 1 nonce each!

    asic[00]=113
    core[085]=00


    asic[03]=113
    core[026]=00


    asic[04]=113
    core[062]=00


    asic[06]=113
    core[092]=00


    asic[08]=113
    core[025]=00


    asic[10]=113
    core[105]=00


    asic[11]=113
    core[025]=00


    asic[12]=113
    core[099]=00


    asic[16]=113
    core[110]=00


    asic[18]=113
    core[100]=00


    asic[25]=113
    core[006]=00


    asic[26]=113
    core[102]=00


    asic[27]=113
    core[107]=00


    asic[28]=113
    core[011]=00


    asic[29]=113
    core[018]=00


    asic[30]=113
    core[077]=00


    asic[31]=113
    core[079]=00


    asic[34]=113
    core[005]=00


    asic[36]=113
    core[010]=00


    asic[38]=113
    core[000]=00


    asic[39]=113
    core[074]=00


    asic[41]=113
    core[049]=00


    asic[42]=113
    core[103]=00


    asic[48]=113
    core[103]=00


    asic[49]=112
    core[015]=00 core[045]=00


    asic[50]=113
    core[066]=00


    asic[52]=113
    core[113]=00


    asic[54]=112
    core[106]=00 core[107]=00


    asic[55]=113
    core[102]=00


    asic[61]=113
    core[031]=00


    asic[62]=113
    core[043]=00

     

     

    ------------------------------------------------------------------------------------------------------

    temperature1 check error
    total valid nonce number:7149
    total send work number:7182
    require valid nonce number:7182
    test pattern result = 0x00000001
    test pattern valid_nonce_num = 7149
    To do the real test

    Begin send pattern again
    Wed May 18 18:40:57 UTC 2016

    read_asic_temperature_TMP421_TMP431: do not read out ASIC 62 Hash Board & ASIC temperature. ret = 0x419800ff


    gGlobalHighestTemp is 219

    read_asic_temperature_TMP421_TMP431: do not read out ASIC 62 Hash Board & ASIC temperature. ret = 0x419800ff


    gGlobalHighestTemp is 219

    read_asic_temperature_TMP421_TMP431: do not read out ASIC 62 Hash Board & ASIC temperature. ret = 0x419800ff


    gGlobalHighestTemp is 219

    read_asic_temperature_TMP421_TMP431: do not read out ASIC 62 Hash Board & ASIC temperature. ret = 0x419800ff


    gGlobalHighestTemp is 219

    read_asic_temperature_TMP421_TMP431: do not read out ASIC 62 Hash Board & ASIC temperature. ret = 0x419800ff


    gGlobalHighestTemp is 219

    --- send pic heart beat ...
    read_asic_temperature_TMP421_TMP431: do not read out ASIC 62 Hash Board & ASIC temperature. ret = 0x419800ff


    gGlobalHighestTemp is 219

    read_asic_temperature_TMP421_TMP431: do not read out ASIC 62 Hash Board & ASIC temperature. ret = 0x419800ff


    gGlobalHighestTemp is 219

    read_asic_temperature_TMP421_TMP431: do not read out ASIC 62 Hash Board & ASIC temperature. ret = 0x419800ff


    gGlobalHighestTemp is 219

    read_asic_temperature_TMP421_TMP431: do not read out ASIC 62 Hash Board & ASIC temperature. ret = 0x419800ff


    gGlobalHighestTemp is 219

    read_asic_temperature_TMP421_TMP431: do not read out ASIC 62 Hash Board & ASIC temperature. ret = 0x419800ff


    gGlobalHighestTemp is 219

    read_asic_temperature_TMP421_TMP431: do not read out ASIC 62 Hash Board & ASIC temperature. ret = 0x419800ff


    gGlobalHighestTemp is 219

    read_asic_temperature_TMP421_TMP431: do not read out ASIC 62 Hash Board & ASIC temperature. ret = 0x419800ff


    gGlobalHighestTemp is 219

    read_asic_temperature_TMP421_TMP431: do not read out ASIC 62 Hash Board & ASIC temperature. ret = 0x419800ff


    gGlobalHighestTemp is 219

    read_asic_temperature_TMP421_TMP431: do not read out ASIC 62 Hash Board & ASIC temperature. ret = 0x419800ff


    gGlobalHighestTemp is 219

    read_asic_temperature_TMP421_TMP431: do not read out ASIC 62 Hash Board & ASIC temperature. ret = 0x419800ff


    gGlobalHighestTemp is 219

    --- send pic heart beat ...
    read_asic_temperature_TMP421_TMP431: do not read out ASIC 62 Hash Board & ASIC temperature. ret = 0x419800ff


    gGlobalHighestTemp is 219

    read_asic_temperature_TMP421_TMP431: do not read out ASIC 62 Hash Board & ASIC temperature. ret = 0x419800ff


    gGlobalHighestTemp is 219

    read_asic_temperature_TMP421_TMP431: do not read out ASIC 62 Hash Board & ASIC temperature. ret = 0x419800ff


    gGlobalHighestTemp is 219

    read_asic_temperature_TMP421_TMP431: do not read out ASIC 62 Hash Board & ASIC temperature. ret = 0x419800ff


    gGlobalHighestTemp is 219

    read_asic_temperature_TMP421_TMP431: do not read out ASIC 62 Hash Board & ASIC temperature. ret = 0x419800ff


    gGlobalHighestTemp is 219

    read_asic_temperature_TMP421_TMP431: do not read out ASIC 62 Hash Board & ASIC temperature. ret = 0x419800ff


    gGlobalHighestTemp is 219

    read_asic_temperature_TMP421_TMP431: do not read out ASIC 62 Hash Board & ASIC temperature. ret = 0x419800ff


    gGlobalHighestTemp is 219

    read_asic_temperature_TMP421_TMP431: do not read out ASIC 62 Hash Board & ASIC temperature. ret = 0x419800ff


    gGlobalHighestTemp is 219

    read_asic_temperature_TMP421_TMP431: do not read out ASIC 62 Hash Board & ASIC temperature. ret = 0x419800ff


    gGlobalHighestTemp is 219

    --- send pic heart beat ...
    read_asic_temperature_TMP421_TMP431: do not read out ASIC 62 Hash Board & ASIC temperature. ret = 0x419800ff


    gGlobalHighestTemp is 219

    read_asic_temperature_TMP421_TMP431: do not read out ASIC 62 Hash Board & ASIC temperature. ret = 0x419800ff


    gGlobalHighestTemp is 219

    get send work num :57456
    send_func: number = 63, conf.dataCount = 912, Conf.pattern_repeat_num = 1

    send test pattern done
    Wed May 18 18:41:24 UTC 2016

    read_asic_temperature_TMP421_TMP431: do not read out ASIC 62 Hash Board & ASIC temperature. ret = 0x419800ff


    gGlobalHighestTemp is 219

    read_asic_temperature_TMP421_TMP431: do not read out ASIC 62 Hash Board & ASIC temperature. ret = 0x419800ff


    gGlobalHighestTemp is 219

    read_asic_temperature_TMP421_TMP431: do not read out ASIC 62 Hash Board & ASIC temperature. ret = 0x419800ff


    gGlobalHighestTemp is 219

    read_asic_temperature_TMP421_TMP431: do not read out ASIC 62 Hash Board & ASIC temperature. ret = 0x419800ff


    gGlobalHighestTemp is 219

    to stop receive

    ------------------------------------------------------------------------------------------------------
    Command mode is VIL
    require nonce number:912
    asic[00]=908 asic[01]=909 asic[02]=908 asic[03]=907 asic[04]=910 asic[05]=910 asic[06]=907 asic[07]=907
    asic[08]=908 asic[09]=910 asic[10]=906 asic[11]=909 asic[12]=910 asic[13]=904 asic[14]=910 asic[15]=912
    asic[16]=909 asic[17]=911 asic[18]=906 asic[19]=908 asic[20]=911 asic[21]=911 asic[22]=910 asic[23]=910
    asic[24]=910 asic[25]=909 asic[26]=908 asic[27]=905 asic[28]=906 asic[29]=908 asic[30]=909 asic[31]=907
    asic[32]=911 asic[33]=909 asic[34]=909 asic[35]=907 asic[36]=910 asic[37]=912 asic[38]=908 asic[39]=900
    asic[40]=911 asic[41]=908 asic[42]=908 asic[43]=908 asic[44]=911 asic[45]=909 asic[46]=909 asic[47]=908
    asic[48]=908 asic[49]=907 asic[50]=909 asic[51]=910 asic[52]=909 asic[53]=912 asic[54]=900 asic[55]=906
    asic[56]=905 asic[57]=907 asic[58]=908 asic[59]=909 asic[60]=910 asic[61]=907 asic[62]=904


    Below ASIC's core didn't receive all the nonce, they should receive 8 nonce each!

    asic[00]=908
    core[085]=04


    asic[01]=909
    core[057]=05


    asic[02]=908
    core[009]=04


    asic[03]=907
    core[026]=03


    asic[04]=910
    core[062]=06


    asic[05]=910
    core[034]=06


    asic[06]=907
    core[092]=03


    asic[07]=907
    core[083]=03


    asic[08]=908
    core[025]=04


    asic[09]=910
    core[042]=06


    asic[10]=906
    core[105]=02


    asic[11]=909
    core[025]=05


    asic[12]=910
    core[099]=06


    asic[13]=904
    core[010]=05 core[078]=03


    asic[14]=910
    core[043]=06


    asic[16]=909
    core[110]=05


    asic[17]=911
    core[084]=07


    asic[18]=906
    core[100]=02


    asic[19]=908
    core[044]=04


    asic[20]=911
    core[071]=07


    asic[21]=911
    core[104]=07


    asic[22]=910
    core[091]=06


    asic[23]=910
    core[059]=06


    asic[24]=910
    core[058]=06


    asic[25]=909
    core[006]=05


    asic[26]=908
    core[102]=04


    asic[27]=905
    core[107]=01


    asic[28]=906
    core[011]=02


    asic[29]=908
    core[018]=04


    asic[30]=909
    core[077]=05


    asic[31]=907
    core[079]=03


    asic[32]=911
    core[023]=07


    asic[33]=909
    core[093]=05


    asic[34]=909
    core[005]=05


    asic[35]=907
    core[086]=03


    asic[36]=910
    core[010]=06


    asic[38]=908
    core[000]=04


    asic[39]=900
    core[074]=02 core[080]=02


    asic[40]=911
    core[071]=07


    asic[41]=908
    core[049]=04


    asic[42]=908
    core[103]=04


    asic[43]=908
    core[080]=07 core[082]=05


    asic[44]=911
    core[042]=07


    asic[45]=909
    core[083]=05


    asic[46]=909
    core[030]=05


    asic[47]=908
    core[096]=04


    asic[48]=908
    core[103]=04


    asic[49]=907
    core[015]=05 core[045]=06


    asic[50]=909
    core[066]=05


    asic[51]=910
    core[105]=06


    asic[52]=909
    core[113]=05


    asic[54]=900
    core[106]=01 core[107]=03


    asic[55]=906
    core[102]=03 core[110]=07


    asic[56]=905
    core[007]=07 core[042]=02


    asic[57]=907
    core[084]=03


    asic[58]=908
    core[023]=04


    asic[59]=909
    core[006]=05


    asic[60]=910
    core[032]=06


    asic[61]=907
    core[031]=03


    asic[62]=904
    core[043]=00

     

     

    ------------------------------------------------------------------------------------------------------

    temperature1 check error
    total valid nonce number:57222
    total send work number:57456
    require valid nonce number:57456
    result = 0x00000001
    crc_error_cnt = 0x00000000


    ----------------------------------- test result -----------------------------------

    Level: 1

    Sensor NG

    Temperature OK

    pattern_test_time = 0

    Pattern OK

    ----------------------------------- test result end -------------------------------

     

    test done time
    Wed May 18 18:41:29 UTC 2016


    --- disable_pic_dac
    --- init_fpga

    0
    Comment actions Permalink

    and for board 2:

     

    gGlobalHighestTemp is 219

    read_asic_temperature_TMP421_TMP431: do not read out ASIC 62 Hash Board & ASIC temperature. ret = 0x419800ff


    gGlobalHighestTemp is 219

    read_asic_temperature_TMP421_TMP431: do not read out ASIC 62 Hash Board & ASIC temperature. ret = 0x419800ff


    gGlobalHighestTemp is 219

    read_asic_temperature_TMP421_TMP431: do not read out ASIC 62 Hash Board & ASIC temperature. ret = 0x419800ff


    gGlobalHighestTemp is 219

    read_asic_temperature_TMP421_TMP431: do not read out ASIC 62 Hash Board & ASIC temperature. ret = 0x419800ff


    gGlobalHighestTemp is 219

    --- send pic heart beat ...
    read_asic_temperature_TMP421_TMP431: do not read out ASIC 62 Hash Board & ASIC temperature. ret = 0x419800ff


    gGlobalHighestTemp is 219

    read_asic_temperature_TMP421_TMP431: do not read out ASIC 62 Hash Board & ASIC temperature. ret = 0x419800ff


    gGlobalHighestTemp is 219

    get send work num :57456
    send_func: number = 63, conf.dataCount = 912, Conf.pattern_repeat_num = 1

    send test pattern done
    Wed May 18 18:41:24 UTC 2016

    read_asic_temperature_TMP421_TMP431: do not read out ASIC 62 Hash Board & ASIC temperature. ret = 0x419800ff


    gGlobalHighestTemp is 219

    read_asic_temperature_TMP421_TMP431: do not read out ASIC 62 Hash Board & ASIC temperature. ret = 0x419800ff


    gGlobalHighestTemp is 219

    read_asic_temperature_TMP421_TMP431: do not read out ASIC 62 Hash Board & ASIC temperature. ret = 0x419800ff


    gGlobalHighestTemp is 219

    read_asic_temperature_TMP421_TMP431: do not read out ASIC 62 Hash Board & ASIC temperature. ret = 0x419800ff


    gGlobalHighestTemp is 219

    to stop receive

    ------------------------------------------------------------------------------------------------------
    Command mode is VIL
    require nonce number:912
    asic[00]=908 asic[01]=909 asic[02]=908 asic[03]=907 asic[04]=910 asic[05]=910 asic[06]=907 asic[07]=907
    asic[08]=908 asic[09]=910 asic[10]=906 asic[11]=909 asic[12]=910 asic[13]=904 asic[14]=910 asic[15]=912
    asic[16]=909 asic[17]=911 asic[18]=906 asic[19]=908 asic[20]=911 asic[21]=911 asic[22]=910 asic[23]=910
    asic[24]=910 asic[25]=909 asic[26]=908 asic[27]=905 asic[28]=906 asic[29]=908 asic[30]=909 asic[31]=907
    asic[32]=911 asic[33]=909 asic[34]=909 asic[35]=907 asic[36]=910 asic[37]=912 asic[38]=908 asic[39]=900
    asic[40]=911 asic[41]=908 asic[42]=908 asic[43]=908 asic[44]=911 asic[45]=909 asic[46]=909 asic[47]=908
    asic[48]=908 asic[49]=907 asic[50]=909 asic[51]=910 asic[52]=909 asic[53]=912 asic[54]=900 asic[55]=906
    asic[56]=905 asic[57]=907 asic[58]=908 asic[59]=909 asic[60]=910 asic[61]=907 asic[62]=904


    Below ASIC's core didn't receive all the nonce, they should receive 8 nonce each!

    asic[00]=908
    core[085]=04


    asic[01]=909
    core[057]=05


    asic[02]=908
    core[009]=04


    asic[03]=907
    core[026]=03


    asic[04]=910
    core[062]=06


    asic[05]=910
    core[034]=06


    asic[06]=907
    core[092]=03


    asic[07]=907
    core[083]=03


    asic[08]=908
    core[025]=04


    asic[09]=910
    core[042]=06


    asic[10]=906
    core[105]=02


    asic[11]=909
    core[025]=05


    asic[12]=910
    core[099]=06


    asic[13]=904
    core[010]=05 core[078]=03


    asic[14]=910
    core[043]=06


    asic[16]=909
    core[110]=05


    asic[17]=911
    core[084]=07


    asic[18]=906
    core[100]=02


    asic[19]=908
    core[044]=04


    asic[20]=911
    core[071]=07


    asic[21]=911
    core[104]=07


    asic[22]=910
    core[091]=06


    asic[23]=910
    core[059]=06


    asic[24]=910
    core[058]=06


    asic[25]=909
    core[006]=05


    asic[26]=908
    core[102]=04


    asic[27]=905
    core[107]=01


    asic[28]=906
    core[011]=02


    asic[29]=908
    core[018]=04


    asic[30]=909
    core[077]=05


    asic[31]=907
    core[079]=03


    asic[32]=911
    core[023]=07


    asic[33]=909
    core[093]=05


    asic[34]=909
    core[005]=05


    asic[35]=907
    core[086]=03


    asic[36]=910
    core[010]=06


    asic[38]=908
    core[000]=04


    asic[39]=900
    core[074]=02 core[080]=02


    asic[40]=911
    core[071]=07


    asic[41]=908
    core[049]=04


    asic[42]=908
    core[103]=04


    asic[43]=908
    core[080]=07 core[082]=05


    asic[44]=911
    core[042]=07


    asic[45]=909
    core[083]=05


    asic[46]=909
    core[030]=05


    asic[47]=908
    core[096]=04


    asic[48]=908
    core[103]=04


    asic[49]=907
    core[015]=05 core[045]=06


    asic[50]=909
    core[066]=05


    asic[51]=910
    core[105]=06


    asic[52]=909
    core[113]=05


    asic[54]=900
    core[106]=01 core[107]=03


    asic[55]=906
    core[102]=03 core[110]=07


    asic[56]=905
    core[007]=07 core[042]=02


    asic[57]=907
    core[084]=03


    asic[58]=908
    core[023]=04


    asic[59]=909
    core[006]=05


    asic[60]=910
    core[032]=06


    asic[61]=907
    core[031]=03


    asic[62]=904
    core[043]=00

     

     

    ------------------------------------------------------------------------------------------------------

    temperature1 check error
    total valid nonce number:57222
    total send work number:57456
    require valid nonce number:57456
    result = 0x00000001
    crc_error_cnt = 0x00000000


    ----------------------------------- test result -----------------------------------

    Level: 1

    Sensor NG

    Temperature OK

    pattern_test_time = 0

    Pattern OK

    ----------------------------------- test result end -------------------------------

     

    test done time
    Wed May 18 18:41:29 UTC 2016


    --- disable_pic_dac
    --- init_fpga

    ,Q
    Xilinx First Stage Boot Loader
    Release 2017.1 Jun 2 2018-12:36:34
    Devcfg driver initialized
    Silicon Version 3.1
    Boot mode is NAND
    InitNand: Geometry = 0x8
    Nand driver initialized
    NAND Init Done
    Flash Base Address: 0xE1000000
    Reboot status register: 0x60400000
    Multiboot Register: 0x0000C000
    Image Start Address: 0x00000000
    Partition Header Offset:0x00000C80
    Partition Count: 3
    Partition Number: 1
    Header Dump
    Image Word Len: 0x0007F2E8
    Data Word Len: 0x0007F2E8
    Partition Word Len:0x0007F2E8
    Load Addr: 0x00000000
    Exec Addr: 0x00000000
    Partition Start: 0x000075D0
    Partition Attr: 0x00000020
    Partition Checksum Offset: 0x00000000
    Section Count: 0x00000001
    Checksum: 0xFFE7AF06
    Bitstream
    In FsblHookBeforeBitstreamDload function
    PCAP:StatusReg = 0x40000A30
    PCAP:device ready
    PCAP:Clear done
    Level Shifter Value = 0xA
    Devcfg Status register = 0x40000A30
    PCAP:Fabric is Initialized done
    PCAP register dump:
    PCAP CTRL 0xF8007000: 0x4C00E07F
    PCAP LOCK 0xF8007004: 0x0000001A
    PCAP CONFIG 0xF8007008: 0x00000508
    PCAP ISR 0xF800700C: 0x0802000B
    PCAP IMR 0xF8007010: 0xFFFFFFFF
    PCAP STATUS 0xF8007014: 0x50000F30
    PCAP DMA SRC ADDR 0xF8007018: 0x00100001
    PCAP DMA DEST ADDR 0xF800701C: 0xFFFFFFFF
    PCAP DMA SRC LEN 0xF8007020: 0x0007F2E8
    PCAP DMA DEST LEN 0xF8007024: 0x0007F2E8
    PCAP ROM SHADOW CTRL 0xF8007028: 0xFFFFFFFF
    PCAP MBOOT 0xF800702C: 0x0000C000
    PCAP SW ID 0xF8007030: 0x00000000
    PCAP UNLOCK 0xF8007034: 0x757BDF0D
    PCAP MCTRL 0xF8007080: 0x30800100

    DMA Done !

    FPGA Done !
    In FsblHookAfterBitstreamDload function
    Partition Number: 2
    Header Dump
    Image Word Len: 0x000216CC
    Data Word Len: 0x000216CC
    Partition Word Len:0x000216CC
    Load Addr: 0x04000000
    Exec Addr: 0x04000000
    Partition Start: 0x000868C0
    Partition Attr: 0x00000010
    Partition Checksum Offset: 0x00000000
    Section Count: 0x00000001
    Checksum: 0xF7F1506A
    Application
    Handoff Address: 0x04000000
    In FsblHookBeforeHandoff function
    SUCCESSFUL_HANDOFF
    FSBL Status = 0x1


    U-Boot 2016.07-g7640c9f-dirty (Feb 27 2018 - 17:57:23 +0800)

    Model: Zynq MicroZED Board
    Board: Xilinx Zynq
    DRAM:
    dram_init: sys_sdram_size = 0x10000000
    dram_init: sys_sdram_size = 256 MB
    dram_init: gd->ram_size = 0x0f000000
    ECC disabled 240 MiB
    NAND: 256 MiB
    MMC: sdhci@e0100000: 0
    Invalid bus 0 (err=-1)
    *** Warning - spi_flash_probe() failed, using default environment

    In: serial@e0000000
    Out: serial@e0000000
    Err: serial@e0000000
    Model: Zynq MicroZED Board
    Board: Xilinx Zynq
    board_late_init: bootargs: mem=240M console=ttyPS0,115200 ramdisk_size=33554432 root=/dev/ram rw earlyprintk

    --- boot gpio value = 0x003fff38
    --- nand boot sd ---

    Net: --- phy_broadcom_init
    ZYNQ GEM: e000b000, phyaddr 0, interface gmii
    --- zynq_gem_probe
    --- mdio_register
    --- mdio_register 1
    --- mdio_register 2
    --- mdio_register 3
    --- zynq_phy_init: interface = 1
    --- zynq_phy_init
    0000000000
    PHY is not detected
    GEM PHY init failed
    No ethernet found.
    Hit any key to stop autoboot: 0
    Copying Linux from SD to RAM...
    reading uEnv.txt
    ** Unable to read file uEnv.txt **
    Copying Linux from SD to RAM...
    reading uImage
    3851632 bytes read in 214 ms (17.2 MiB/s)
    reading devicetree.dtb
    7500 bytes read in 15 ms (488.3 KiB/s)
    reading uramdisk.image.gz
    12668616 bytes read in 668 ms (18.1 MiB/s)
    ## Booting kernel from Legacy Image at 02000000 ...
    Image Name: Linux-4.6.0-xilinx-g99349d0-dirt
    Image Type: ARM Linux Kernel Image (uncompressed)
    Data Size: 3851568 Bytes = 3.7 MiB
    Load Address: 00008000
    Entry Point: 00008000
    Verifying Checksum ... OK
    ## Loading init Ramdisk from Legacy for 0, Image at 04000000 ...
    Image Name:
    Image Type: ARM Linux RAMDisk Image (gzip compressed)
    Data Size: 12668552 Bytes = 12.1 MiB
    Load Address: 00000000
    Entry Point: 00000000
    Verifying Checksum ... OK
    get ramdisk ok
    ## Flattened Device Tree blob at 03000000
    Booting using the fdt blob at 0x3000000
    Loading Kernel Image ... OK
    Loading Ramdisk to 0ceeb000, end 0daffe88 ... OK
    Loading Device Tree to 0cee6000, end 0ceead4b ... OK

    Starting kernel ...

    Booting Linux on physical CPU 0x0
    Linux version 4.6.0-xilinx-g99349d0-dirty (lzq@armdev2) (gcc version 4.8.3 20140320 (prerelease) (Sourcery CodeBench Lite 2014.05-23) ) #21 SMP PREEMPT Tue Dec 5 17:35:04 CST 2017
    CPU: ARMv7 Processor [413fc090] revision 0 (ARMv7), cr=18c5387d
    CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
    Machine model: Xilinx Zynq
    cma: Reserved 16 MiB at 0x0e000000
    Memory policy: Data cache writealloc
    percpu: Embedded 12 pages/cpu @cddf1000 s19776 r8192 d21184 u49152
    Built 1 zonelists in Zone order, mobility grouping on. Total pages: 60960
    Kernel command line: mem=240M console=ttyPS0,115200 ramdisk_size=33554432 root=/dev/ram rw earlyprintk
    PID hash table entries: 1024 (order: 0, 4096 bytes)
    Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
    Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
    Memory: 206012K/245760K available (5317K kernel code, 230K rwdata, 1844K rodata, 1024K init, 222K bss, 23364K reserved, 16384K cma-reserved, 0K highmem)
    Virtual kernel memory layout:
    vector : 0xffff0000 - 0xffff1000 ( 4 kB)
    fixmap : 0xffc00000 - 0xfff00000 (3072 kB)
    vmalloc : 0xcf800000 - 0xff800000 ( 768 MB)
    lowmem : 0xc0000000 - 0xcf000000 ( 240 MB)
    pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
    modules : 0xbf000000 - 0xbfe00000 ( 14 MB)
    .text : 0xc0008000 - 0xc07fe410 (8154 kB)
    .init : 0xc0800000 - 0xc0900000 (1024 kB)
    .data : 0xc0900000 - 0xc0939a60 ( 231 kB)
    .bss : 0xc0939a60 - 0xc09713e8 ( 223 kB)
    Preemptible hierarchical RCU implementation.
    Build-time adjustment of leaf fanout to 32.
    RCU restricting CPUs from NR_CPUS=4 to nr_cpu_ids=2.
    RCU: Adjusting geometry for rcu_fanout_leaf=32, nr_cpu_ids=2
    NR_IRQS:16 nr_irqs:16 16
    efuse mapped to cf800000
    ps7-slcr mapped to cf802000
    L2C: platform modifies aux control register: 0x72360000 -> 0x72760000
    L2C: DT/platform modifies aux control register: 0x72360000 -> 0x72760000
    L2C-310 erratum 769419 enabled
    L2C-310 enabling early BRESP for Cortex-A9
    L2C-310 full line of zeros enabled for Cortex-A9
    L2C-310 ID prefetch enabled, offset 1 lines
    L2C-310 dynamic clock gating enabled, standby mode enabled
    L2C-310 cache controller enabled, 8 ways, 512 kB
    L2C-310: CACHE_ID 0x410000c8, AUX_CTRL 0x76760001
    zynq_clock_init: clkc starts at cf802100
    Zynq clock init
    sched_clock: 64 bits at 333MHz, resolution 3ns, wraps every 4398046511103ns
    clocksource: arm_global_timer: mask: 0xffffffffffffffff max_cycles: 0x4ce07af025, max_idle_ns: 440795209040 ns
    Switching to timer-based delay loop, resolution 3ns
    clocksource: ttc_clocksource: mask: 0xffff max_cycles: 0xffff, max_idle_ns: 537538477 ns
    ps7-ttc #0 at cf80a000, irq=18
    Console: colour dummy device 80x30
    Calibrating delay loop (skipped), value calculated using timer frequency.. 666.66 BogoMIPS (lpj=3333333)
    pid_max: default: 32768 minimum: 301
    Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
    Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
    CPU: Testing write buffer coherency: ok
    CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
    Setting up static identity map for 0x100000 - 0x100058
    CPU1: failed to boot: -1
    Brought up 1 CPUs
    SMP: Total of 1 processors activated (666.66 BogoMIPS).
    CPU: All CPU(s) started in SVC mode.
    devtmpfs: initialized
    VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 4
    clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
    pinctrl core: initialized pinctrl subsystem
    NET: Registered protocol family 16
    DMA: preallocated 256 KiB pool for atomic coherent allocations
    cpuidle: using governor menu
    hw-breakpoint: found 5 (+1 reserved) breakpoint and 1 watchpoint registers.
    hw-breakpoint: maximum watchpoint size is 4 bytes.
    zynq-ocm f800c000.ps7-ocmc: ZYNQ OCM pool: 256 KiB @ 0xcf880000
    vgaarb: loaded
    SCSI subsystem initialized
    usbcore: registered new interface driver usbfs
    usbcore: registered new interface driver hub
    usbcore: registered new device driver usb
    media: Linux media interface: v0.10
    Linux video capture interface: v2.00
    pps_core: LinuxPPS API ver. 1 registered
    pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
    PTP clock support registered
    EDAC MC: Ver: 3.0.0
    Advanced Linux Sound Architecture Driver Initialized.
    clocksource: Switched to clocksource arm_global_timer
    NET: Registered protocol family 2
    TCP established hash table entries: 2048 (order: 1, 8192 bytes)
    TCP bind hash table entries: 2048 (order: 2, 16384 bytes)
    TCP: Hash tables configured (established 2048 bind 2048)
    UDP hash table entries: 256 (order: 1, 8192 bytes)
    UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
    NET: Registered protocol family 1
    RPC: Registered named UNIX socket transport module.
    RPC: Registered udp transport module.
    RPC: Registered tcp transport module.
    RPC: Registered tcp NFSv4.1 backchannel transport module.
    Trying to unpack rootfs image as initramfs...
    rootfs image is not initramfs (no cpio magic); looks like an initrd
    Freeing initrd memory: 12372K (cceeb000 - cdb00000)
    hw perfevents: enabled with armv7_cortex_a9 PMU driver, 7 counters available
    futex hash table entries: 512 (order: 3, 32768 bytes)
    workingset: timestamp_bits=28 max_order=16 bucket_order=0
    jffs2: version 2.2. (NAND) (SUMMARY) © 2001-2006 Red Hat, Inc.
    io scheduler noop registered
    io scheduler deadline registered
    io scheduler cfq registered (default)
    dma-pl330 f8003000.ps7-dma: Loaded driver for PL330 DMAC-241330
    dma-pl330 f8003000.ps7-dma: DBUFF-128x8bytes Num_Chans-8 Num_Peri-4 Num_Events-16
    e0000000.serial: ttyPS0 at MMIO 0xe0000000 (irq = 158, base_baud = 6249999) is a xuartps
    console [ttyPS0] enabled
    xdevcfg f8007000.ps7-dev-cfg: ioremap 0xf8007000 to cf86e000
    [drm] Initialized drm 1.1.0 20060810
    brd: module loaded
    loop: module loaded
    CAN device driver interface
    e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k
    e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
    libphy: XEMACPS mii bus: probed
    [Firmware Warn]: /amba@0/ps7-ethernet@e000b000/mdio/phy@0: Whitelisted compatible string. Please remove
    xemacps e000b000.ps7-ethernet: pdev->id -1, baseaddr 0xe000b000, irq 31
    ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
    ehci-pci: EHCI PCI platform driver
    usbcore: registered new interface driver usb-storage
    mousedev: PS/2 mouse device common for all mice
    i2c /dev entries driver
    Xilinx Zynq CpuIdle Driver started
    sdhci: Secure Digital Host Controller Interface driver
    sdhci: Copyright(c) Pierre Ossman
    sdhci-pltfm: SDHCI platform and OF driver helper
    mmc0: SDHCI controller on e0100000.ps7-sdio [e0100000.ps7-sdio] using ADMA
    ledtrig-cpu: registered to indicate activity on CPUs
    usbcore: registered new interface driver usbhid
    usbhid: USB HID core driver
    nand: device found, Manufacturer ID: 0x2c, Chip ID: 0xda
    nand: Micron MT29F2G08ABAEAWP
    nand: 256 MiB, SLC, erase size: 128 KiB, page size: 2048, OOB size: 64
    nand: WARNING: pl35x-nand: the ECC used on your system is too weak compared to the one required by the NAND chip
    Bad block table found at page 131008, version 0x01
    Bad block table found at page 130944, version 0x01
    3 ofpart partitions found on MTD device pl35x-nand
    Creating 3 MTD partitions on "pl35x-nand":
    0x000000000000-0x000002800000 : "BOOT.bin-env-dts-kernel"
    0x000002800000-0x000004800000 : "ramfs"
    mmc0: new high speed SDHC card at address aaaa
    mmcblk0: mmc0:aaaa SC32G 29.7 GiB
    0x000004800000-0x000005000000 : "configs"
    mmcblk0: p1
    NET: Registered protocol family 10
    sit: IPv6 over IPv4 tunneling driver
    NET: Registered protocol family 17
    can: controller area network core (rev 20120528 abi 9)
    NET: Registered protocol family 29
    can: raw protocol (rev 20120528)
    can: broadcast manager protocol (rev 20120528 t)
    can: netlink gateway (rev 20130117) max_hops=1
    zynq_pm_ioremap: no compatible node found for 'xlnx,zynq-ddrc-a05'
    zynq_pm_late_init: Unable to map DDRC IO memory.
    Registering SWP/SWPB emulation handler
    hctosys: unable to open rtc device (rtc0)
    ALSA device list:
    No soundcards found.
    RAMDISK: gzip image found at block 0
    EXT4-fs (ram0): couldn't mount as ext3 due to feature incompatibilities
    EXT4-fs (ram0): mounted filesystem without journal. Opts: (null)
    VFS: Mounted root (ext4 filesystem) on device 1:0.
    devtmpfs: mounted
    Freeing unused kernel memory: 1024K (c0800000 - c0900000)
    INIT: version 2.88 booting
    start banner.sh
    start mountdevtmpfs.sh
    mount: mounting devtmpfs on /dev failed: Device or resource busy
    Starting Bootlog daemon: bootlogd: cannot allocate pseudo tty: No such file or directory
    bootlogd.
    Starting Monitor-ipsig daemon: monitor-ipsig.
    EXT4-fs (ram0): re-mounted. Opts: block_validity,delalloc,barrier,user_xattr
    random: dd urandom read with 2 bits of entropy available
    start mountall.sh
    check mouted config
    mounting config
    Starting syslogd/klogd: done
    killall: udhcpc: no process killed
    IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready

    Error resolving pool.ntp.org: System error (-11)
    1 Jan 00:00:24 ntpdate[879]: Can't find host pool.ntp.org: System error (-11)
    1 Jan 00:00:24 ntpdate[879]: no servers can be used, exiting
    Starting Dropbear SSH server: dropbear.
    Starting ntpd: done
    Starting Avahi Daemon: avahi-daemon.
    Starting Lighttpd Web Server: lighttpd.
    start cgminer.sh
    FAT-fs (mmcblk0p1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
    Starting Cgminer daemon: 10.1.12.254 is reachable
    No bitmain_axi.ko
    In axi fpga driver!
    request_mem_region OK!
    AXI fpga dev virtual address is 0xcf9a4000
    *base_vir_addr = 0xab000
    FUNCTION_SETTING

    SET_ENTRY_POINT

    DISPLAY_STATUS

    CLEAR_DISPLAY

    SET_ADDRESS_BACK

    SET_DDRAM_ADDRESS

    bitmain-lcd: success to register device
    memory_size = 235792
    fpga_mem_offset_addr=0x0F000000
    In fpga mem driver!
    request_mem_region OK!
    fpga mem virtual address is 0xd2000000
    single-board-test start
    cgminer.
    export_store: invalid GPIO 46
    sh: write error: Invalid argument
    mmap axi_fpga_addr = 0xb6fa0000
    axi_fpga_addr data = 0xb000
    mmap fpgabitmain lcd opened!
    _mem_addr = 0xb5e2e000
    set_nonce2_and_job_id_store_address: set NONCE2_AND_JOBID_STORE_ADDRESS is 0x3f000000
    get_nonce2_and_job_id_store_address: NONCE2_AND_JOBID_STORE_ADDRESS is 0x3f000000
    INIT: Entering runlevel: 5

    ---read_config: gHashBoard_S9


    ---read_config: Conf.DataCount = 912

    read_config: sensor_model = 3, DEVICEADDR = 0x00980000
    get_works: loop = 63
    Stopping Bootlog daemon: bootlogd.

    .---O---.
    | | .-. o o
    | | |-----.-----.-----.| | .----..-----.-----.
    | | | __ | ---'| '--.| .-'| | |
    | | | | | |--- || --'| | | ' | | | |
    '---'---'--'--'--. |-----''----''--' '-----'-'-'-'
    -' |
    '---'

    The Angstrom Distribution antMiner ttyPS0

    Angstrom v2013.06 - Kernel 4.6.0-xilinx-g99349d0-dirty

    antMiner login: min work minertest[0]:3648

     

     

    --- key down:
    --- singleBoardTest_S9_BM1387_63


    --- get time
    Socket initialisation ok
    get_time: Start set system date
    Set system datatime ok!
    UTC time is : Wed May 18 18:36:12 2016

    change_time_format: year = 0x16
    change_time_format: month = 0x05
    change_time_format: day = 0x18
    change_time_format: hour = 0x18
    change_time_format: minute = 0x36
    change_time_format: second = 0x12

    begin test time
    Wed May 18 18:36:12 UTC 2016

    --- init_fpga

    --- read_id


    --- FPGA chip id: low: 0x69208814, high: 0x8018f524
    ts.tv_sec = 0x573cb61c
    ts.tv_usec = 0x00099013
    rand_num = 0x000000fa
    --- read_id: hash_board_id[0] = 0x69
    --- read_id: hash_board_id[1] = 0x20
    --- read_id: hash_board_id[2] = 0x88
    --- read_id: hash_board_id[3] = 0x14
    --- read_id: hash_board_id[4] = 0x57
    --- read_id: hash_board_id[5] = 0x3c
    --- read_id: hash_board_id[6] = 0xb6
    --- read_id: hash_board_id[7] = 0x1c
    --- read_id: hash_board_id[8] = 0xfa
    --- read_id: hash_board_id[9] = 0x09
    --- read_id: hash_board_id[10] = 0x90
    --- read_id: hash_board_id[11] = 0x13

    --- check_chain
    get_hash_on_plug: HASH_ON_PLUG is 0x1
    check_chain: gChain = 0
    reset_iic_pic
    jump_to_app_from_loader

    --- set_hash_board_id_number
    --- send pic heart beat ...

    --- set pic voltage
    conf.Pic = 1
    conf.IICPic = 1
    conf.dac = 1
    temp_voltage = 91.651323
    set_pic_voltage
    set_Hash_board_voltage_BM1387_63: conf.Voltage1 = 890
    set_Hash_board_voltage_BM1387_63: pic_voltage1 = 91

    --- enable_pic_dac
    --- reset_hash_board

    --- set command mode
    get_dhash_acc_control: DHASH_ACC_CONTROL is 0x20
    set_dhash_acc_control: set DHASH_ACC_CONTROL is 0x8100
    get_dhash_acc_control: DHASH_ACC_CONTROL is 0x8100
    set command mode to VIL

    singleBoardTest_S9_BM1387_63: AsicType = 1387

    singleBoardTest_S9_BM1387_63: asicNum = 64

    singleBoardTest_S9_BM1387_63: real AsicNum = 63

    --- check asic number
    check_asic_reg: check chain J1
    check_asic_reg: no asic address register come back for 1 time.
    check_asic_reg: no asic address register come back for 2 time.
    check_asic_reg: no asic address register come back for 3 time.
    check_asic_reg: chain J1 has 9 ASIC
    check chain: asicNum = 9


    --- no hash board!!! ---
    asic num=9, config asic_num=63
    ----------------------------

     


    --- key down:
    --- singleBoardTest_S9_BM1387_63


    --- get time
    Socket initialisation ok
    UTC time is : Wed May 18 18:37:40 2016

    change_time_format: year = 0x16
    change_time_format: month = 0x05
    change_time_format: day = 0x18
    change_time_format: hour = 0x18
    change_time_format: minute = 0x37
    change_time_format: second = 0x40

    begin test time
    Wed May 18 18:37:40 UTC 2016

    --- init_fpga

    --- read_id


    --- FPGA chip id: low: 0x69208814, high: 0x8018f524
    ts.tv_sec = 0x573cb675
    ts.tv_usec = 0x0001f735
    rand_num = 0x00000020
    --- read_id: hash_board_id[0] = 0x69
    --- read_id: hash_board_id[1] = 0x20
    --- read_id: hash_board_id[2] = 0x88
    --- read_id: hash_board_id[3] = 0x14
    --- read_id: hash_board_id[4] = 0x57
    --- read_id: hash_board_id[5] = 0x3c
    --- read_id: hash_board_id[6] = 0xb6
    --- read_id: hash_board_id[7] = 0x75
    --- read_id: hash_board_id[8] = 0x20
    --- read_id: hash_board_id[9] = 0x01
    --- read_id: hash_board_id[10] = 0xf7
    --- read_id: hash_board_id[11] = 0x35

    --- check_chain
    get_hash_on_plug: HASH_ON_PLUG is 0x1
    check_chain: gChain = 0
    reset_iic_pic
    jump_to_app_from_loader

    --- set_hash_board_id_number
    --- send pic heart beat ...

    --- set pic voltage
    conf.Pic = 1
    conf.IICPic = 1
    conf.dac = 1
    temp_voltage = 91.651323
    set_pic_voltage
    set_Hash_board_voltage_BM1387_63: conf.Voltage1 = 890
    set_Hash_board_voltage_BM1387_63: pic_voltage1 = 91

    --- enable_pic_dac
    --- reset_hash_board

    --- set command mode
    get_dhash_acc_control: DHASH_ACC_CONTROL is 0x20
    set_dhash_acc_control: set DHASH_ACC_CONTROL is 0x8100
    get_dhash_acc_control: DHASH_ACC_CONTROL is 0x8100
    set command mode to VIL

    singleBoardTest_S9_BM1387_63: AsicType = 1387

    singleBoardTest_S9_BM1387_63: asicNum = 64

    singleBoardTest_S9_BM1387_63: real AsicNum = 63

    --- check asic number
    check_asic_reg: check chain J1
    check_asic_reg: no asic address register come back for 1 time.
    check_asic_reg: no asic address register come back for 2 time.
    check_asic_reg: no asic address register come back for 3 time.
    check_asic_reg: chain J1 has 27 ASIC
    check chain: asicNum = 27


    --- no hash board!!! ---
    asic num=27, config asic_num=63
    ----------------------------

     

     

    --- key down:
    --- singleBoardTest_S9_BM1387_63


    --- get time
    Socket initialisation ok
    UTC time is : Wed May 18 18:38:30 2016

    change_time_format: year = 0x16
    change_time_format: month = 0x05
    change_time_format: day = 0x18
    change_time_format: hour = 0x18
    change_time_format: minute = 0x38
    change_time_format: second = 0x30

    begin test time
    Wed May 18 18:38:30 UTC 2016

    --- init_fpga

    --- read_id


    --- FPGA chip id: low: 0x69208814, high: 0x8018f524
    ts.tv_sec = 0x573cb6a7
    ts.tv_usec = 0x000684f6
    rand_num = 0x00000075
    --- read_id: hash_board_id[0] = 0x69
    --- read_id: hash_board_id[1] = 0x20
    --- read_id: hash_board_id[2] = 0x88
    --- read_id: hash_board_id[3] = 0x14
    --- read_id: hash_board_id[4] = 0x57
    --- read_id: hash_board_id[5] = 0x3c
    --- read_id: hash_board_id[6] = 0xb6
    --- read_id: hash_board_id[7] = 0xa7
    --- read_id: hash_board_id[8] = 0x75
    --- read_id: hash_board_id[9] = 0x06
    --- read_id: hash_board_id[10] = 0x84
    --- read_id: hash_board_id[11] = 0xf6

    --- check_chain
    get_hash_on_plug: HASH_ON_PLUG is 0x1
    check_chain: gChain = 0
    reset_iic_pic
    jump_to_app_from_loader

    --- set_hash_board_id_number
    --- send pic heart beat ...

    --- set pic voltage
    conf.Pic = 1
    conf.IICPic = 1
    conf.dac = 1
    temp_voltage = 91.651323
    set_pic_voltage
    set_Hash_board_voltage_BM1387_63: conf.Voltage1 = 890
    set_Hash_board_voltage_BM1387_63: pic_voltage1 = 91

    --- enable_pic_dac
    --- reset_hash_board

    --- set command mode
    get_dhash_acc_control: DHASH_ACC_CONTROL is 0x20
    set_dhash_acc_control: set DHASH_ACC_CONTROL is 0x8100
    get_dhash_acc_control: DHASH_ACC_CONTROL is 0x8100
    set command mode to VIL

    singleBoardTest_S9_BM1387_63: AsicType = 1387

    singleBoardTest_S9_BM1387_63: asicNum = 64

    singleBoardTest_S9_BM1387_63: real AsicNum = 63

    --- check asic number
    check_asic_reg: check chain J1
    check_asic_reg: no asic address register come back for 1 time.
    check_asic_reg: no asic address register come back for 2 time.
    check_asic_reg: no asic address register come back for 3 time.
    check_asic_reg: chain J1 has 9 ASIC
    check chain: asicNum = 9


    --- no hash board!!! ---
    asic num=9, config asic_num=63
    ----------------------------

    0
    Comment actions Permalink

    It means only find 9 asic in chain J1,It hasn't been fixed yet.

    0
    Comment actions Permalink

    thanks

    this topic  was very helpful

    0
    Comment actions Permalink
    First,use the SD card recovery image to flash the control board of the tester,then download the maintenance document to the control board of the tester. the SD card recovery image is for recovering the control board,the maintenance document is the software for testing the hashboard.

    send me please 2 files.

    I need to restore the SD card to check the hash of the boards. for S9

    email: narik2009tm@mail.ru 

    thanks

    0
    Comment actions Permalink

    Hello

    thanks for your response

    this is my problem using the test fixture:
    I  have a good and working hashboard which is working correctly when I'm connecting it to a normal control board, but when I connect it to test fixture, the test fixture bring up some weird output.

    here is the serial data from fixture when initializing the test fixture:

    Xshell 5 (Build 0835)
    Copyright (c) 2002-2015 NetSarang Computer, Inc. All rights reserved.

    Type `help' to learn how to use Xshell prompt.
    [c:\~]$ 

    Connecting to COM4...
    Connected.


    Xilinx First Stage Boot Loader 
    Release 2017.1    Sep  1 2018-14:57:43
    Devcfg driver initialized 
    Silicon Version 3.1
    Boot mode is NAND
                     InitNand: Geometry = 0x8
    Nand driver initialized 
    NAND Init Done 
    Flash Base Address: 0xE1000000
    Reboot status register: 0x60400000
    Multiboot Register: 0x0000C000
    Image Start Address: 0x00000000
    Partition Header Offset:0x00000C80
    Partition Count: 3
    Partition Number: 1
    Header Dump
    Image Word Len: 0x0007F2E8
    Data Word Len: 0x0007F2E8
    Partition Word Len:0x0007F2E8
    Load Addr: 0x00000000
    Exec Addr: 0x00000000
    Partition Start: 0x000075D0
    Partition Attr: 0x00000020
    Partition Checksum Offset: 0x00000000
    Section Count: 0x00000001
    Checksum: 0xFFE7AF06
    Bitstream
    In FsblHookBeforeBitstreamDload function 
    PCAP:StatusReg = 0x40000A30
    PCAP:device ready
    PCAP:Clear done
    Level Shifter Value = 0xA 
    Devcfg Status register = 0x40000A30 
    PCAP:Fabric is Initialized done
    PCAP register dump:
    PCAP CTRL 0xF8007000: 0x4C00E07F
    PCAP LOCK 0xF8007004: 0x0000001A
    PCAP CONFIG 0xF8007008: 0x00000508
    PCAP ISR 0xF800700C: 0x0802000B
    PCAP IMR 0xF8007010: 0xFFFFFFFF
    PCAP STATUS 0xF8007014: 0x50000F30
    PCAP DMA SRC ADDR 0xF8007018: 0x00100001
    PCAP DMA DEST ADDR 0xF800701C: 0xFFFFFFFF
    PCAP DMA SRC LEN 0xF8007020: 0x0007F2E8
    PCAP DMA DEST LEN 0xF8007024: 0x0007F2E8
    PCAP ROM SHADOW CTRL 0xF8007028: 0xFFFFFFFF
    PCAP MBOOT 0xF800702C: 0x0000C000
    PCAP SW ID 0xF8007030: 0x00000000
    PCAP UNLOCK 0xF8007034: 0x757BDF0D
    PCAP MCTRL 0xF8007080: 0x30800100

    DMA Done ! 

    FPGA Done ! 
    In FsblHookAfterBitstreamDload function 
    Partition Number: 2
    Header Dump
    Image Word Len: 0x000215CE
    Data Word Len: 0x000215CE
    Partition Word Len:0x000215CE
    Load Addr: 0x04000000
    Exec Addr: 0x04000000
    Partition Start: 0x000868C0
    Partition Attr: 0x00000010
    Partition Checksum Offset: 0x00000000
    Section Count: 0x00000001
    Checksum: 0xF7F15364
    Application
    Handoff Address: 0x04000000
    In FsblHookBeforeHandoff function 
    SUCCESSFUL_HANDOFF
    FSBL Status = 0x1


    U-Boot 2016.07-g10de276-dirty (Dec 10 2018 - 16:28:51 +0800)

    Model: Zynq MicroZED Board
    Board: Xilinx Zynq
    DRAM:  
    dram_init: sys_sdram_size = 0x10000000
    dram_init: sys_sdram_size = 256 MB
    dram_init: gd->ram_size = 0x0f000000
    ECC disabled 240 MiB
    NAND:  256 MiB
    MMC:   sdhci@e0100000: 0
    Invalid bus 0 (err=-1)
    *** Warning - spi_flash_probe() failed, using default environment

    In:    serial@e0000000
    Out:   serial@e0000000
    Err:   serial@e0000000
    Model: Zynq MicroZED Board
    Board: Xilinx Zynq
    board_late_init: bootargs: mem=240M console=ttyPS0,115200 ramdisk_size=33554432 root=/dev/ram rw earlyprintk

    --- boot gpio value = 0x003fff38
    --- nand boot sd ---

    Net:   --- phy_broadcom_init
    ZYNQ GEM: e000b000, phyaddr 0, interface mii
    --- zynq_gem_probe
    --- mdio_register
    --- mdio_register 1
    --- mdio_register 2
    --- mdio_register 3
    --- zynq_phy_init: interface = 0
    --- zynq_phy_init
     0000000000
    PHY is not detected
    GEM PHY init failed
    No ethernet found.
    Hit any key to stop autoboot:  0 
    Copying Linux from SD to RAM...
    reading uEnv.txt
    ** Unable to read file uEnv.txt **
    Copying Linux from SD to RAM...
    reading uImage
    3851632 bytes read in 217 ms (16.9 MiB/s)
    reading devicetree.dtb
    7500 bytes read in 16 ms (457 KiB/s)
    reading uramdisk.image.gz
    12668616 bytes read in 673 ms (18 MiB/s)
    ## Booting kernel from Legacy Image at 02000000 ...
       Image Name:   Linux-4.6.0-xilinx-g99349d0-dirt
       Image Type:   ARM Linux Kernel Image (uncompressed)
       Data Size:    3851568 Bytes = 3.7 MiB
       Load Address: 00008000
       Entry Point:  00008000
       Verifying Checksum ... OK
    ## Loading init Ramdisk from Legacy Image at 04000000 ...
       Image Name:   
       Image Type:   ARM Linux RAMDisk Image (gzip compressed)
       Data Size:    12668552 Bytes = 12.1 MiB
       Load Address: 00000000
       Entry Point:  00000000
       Verifying Checksum ... OK
    ## Flattened Device Tree blob at 03000000
       Booting using the fdt blob at 0x3000000
       Loading Kernel Image ... OK
       Loading Ramdisk to 0ceeb000, end 0daffe88 ... OK
       Loading Device Tree to 0cee6000, end 0ceead4b ... OK

    Starting kernel ...

    Booting Linux on physical CPU 0x0
    Linux version 4.6.0-xilinx-g99349d0-dirty (lzq@armdev2) (gcc version 4.8.3 20140320 (prerelease) (Sourcery CodeBench Lite 2014.05-23) ) #21 SMP PREEMPT Tue Dec 5 17:35:04 CST 2017
    CPU: ARMv7 Processor [413fc090] revision 0 (ARMv7), cr=18c5387d
    CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
    Machine model: Xilinx Zynq
    cma: Reserved 16 MiB at 0x0e000000
    Memory policy: Data cache writealloc
    percpu: Embedded 12 pages/cpu @cddf1000 s19776 r8192 d21184 u49152
    Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 60960
    Kernel command line: mem=240M console=ttyPS0,115200 ramdisk_size=33554432 root=/dev/ram rw earlyprintk
    PID hash table entries: 1024 (order: 0, 4096 bytes)
    Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
    Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
    Memory: 206012K/245760K available (5317K kernel code, 230K rwdata, 1844K rodata, 1024K init, 222K bss, 23364K reserved, 16384K cma-reserved, 0K highmem)
    Virtual kernel memory layout:
        vector  : 0xffff0000 - 0xffff1000   (   4 kB)
        fixmap  : 0xffc00000 - 0xfff00000   (3072 kB)
        vmalloc : 0xcf800000 - 0xff800000   ( 768 MB)
        lowmem  : 0xc0000000 - 0xcf000000   ( 240 MB)
        pkmap   : 0xbfe00000 - 0xc0000000   (   2 MB)
        modules : 0xbf000000 - 0xbfe00000   (  14 MB)
          .text : 0xc0008000 - 0xc07fe410   (8154 kB)
          .init : 0xc0800000 - 0xc0900000   (1024 kB)
          .data : 0xc0900000 - 0xc0939a60   ( 231 kB)
           .bss : 0xc0939a60 - 0xc09713e8   ( 223 kB)
    Preemptible hierarchical RCU implementation.
        Build-time adjustment of leaf fanout to 32.
        RCU restricting CPUs from NR_CPUS=4 to nr_cpu_ids=2.
    RCU: Adjusting geometry for rcu_fanout_leaf=32, nr_cpu_ids=2
    NR_IRQS:16 nr_irqs:16 16
    efuse mapped to cf800000
    ps7-slcr mapped to cf802000
    L2C: platform modifies aux control register: 0x72360000 -> 0x72760000
    L2C: DT/platform modifies aux control register: 0x72360000 -> 0x72760000
    L2C-310 erratum 769419 enabled
    L2C-310 enabling early BRESP for Cortex-A9
    L2C-310 full line of zeros enabled for Cortex-A9
    L2C-310 ID prefetch enabled, offset 1 lines
    L2C-310 dynamic clock gating enabled, standby mode enabled
    L2C-310 cache controller enabled, 8 ways, 512 kB
    L2C-310: CACHE_ID 0x410000c8, AUX_CTRL 0x76760001
    zynq_clock_init: clkc starts at cf802100
    Zynq clock init
    sched_clock: 64 bits at 333MHz, resolution 3ns, wraps every 4398046511103ns
    clocksource: arm_global_timer: mask: 0xffffffffffffffff max_cycles: 0x4ce07af025, max_idle_ns: 440795209040 ns
    Switching to timer-based delay loop, resolution 3ns
    clocksource: ttc_clocksource: mask: 0xffff max_cycles: 0xffff, max_idle_ns: 537538477 ns
    ps7-ttc #0 at cf80a000, irq=18
    Console: colour dummy device 80x30
    Calibrating delay loop (skipped), value calculated using timer frequency.. 666.66 BogoMIPS (lpj=3333333)
    pid_max: default: 32768 minimum: 301
    Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
    Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
    CPU: Testing write buffer coherency: ok
    CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
    Setting up static identity map for 0x100000 - 0x100058
    CPU1: failed to boot: -1
    Brought up 1 CPUs
    SMP: Total of 1 processors activated (666.66 BogoMIPS).
    CPU: All CPU(s) started in SVC mode.
    devtmpfs: initialized
    VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 4
    clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
    pinctrl core: initialized pinctrl subsystem
    NET: Registered protocol family 16
    DMA: preallocated 256 KiB pool for atomic coherent allocations
    cpuidle: using governor menu
    hw-breakpoint: found 5 (+1 reserved) breakpoint and 1 watchpoint registers.
    hw-breakpoint: maximum watchpoint size is 4 bytes.
    zynq-ocm f800c000.ps7-ocmc: ZYNQ OCM pool: 256 KiB @ 0xcf880000
    vgaarb: loaded
    SCSI subsystem initialized
    usbcore: registered new interface driver usbfs
    usbcore: registered new interface driver hub
    usbcore: registered new device driver usb
    media: Linux media interface: v0.10
    Linux video capture interface: v2.00
    pps_core: LinuxPPS API ver. 1 registered
    pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
    PTP clock support registered
    EDAC MC: Ver: 3.0.0
    Advanced Linux Sound Architecture Driver Initialized.
    clocksource: Switched to clocksource arm_global_timer
    NET: Registered protocol family 2
    TCP established hash table entries: 2048 (order: 1, 8192 bytes)
    TCP bind hash table entries: 2048 (order: 2, 16384 bytes)
    TCP: Hash tables configured (established 2048 bind 2048)
    UDP hash table entries: 256 (order: 1, 8192 bytes)
    UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
    NET: Registered protocol family 1
    RPC: Registered named UNIX socket transport module.
    RPC: Registered udp transport module.
    RPC: Registered tcp transport module.
    RPC: Registered tcp NFSv4.1 backchannel transport module.
    Trying to unpack rootfs image as initramfs...
    rootfs image is not initramfs (no cpio magic); looks like an initrd
    Freeing initrd memory: 12372K (cceeb000 - cdb00000)
    hw perfevents: enabled with armv7_cortex_a9 PMU driver, 7 counters available
    futex hash table entries: 512 (order: 3, 32768 bytes)
    workingset: timestamp_bits=28 max_order=16 bucket_order=0
    jffs2: version 2.2. (NAND) (SUMMARY)  © 2001-2006 Red Hat, Inc.
    io scheduler noop registered
    io scheduler deadline registered
    io scheduler cfq registered (default)
    dma-pl330 f8003000.ps7-dma: Loaded driver for PL330 DMAC-241330
    dma-pl330 f8003000.ps7-dma:     DBUFF-128x8bytes Num_Chans-8 Num_Peri-4 Num_Events-16
    e0000000.serial: ttyPS0 at MMIO 0xe0000000 (irq = 158, base_baud = 6249999) is a xuartps
    console [ttyPS0] enabled
    xdevcfg f8007000.ps7-dev-cfg: ioremap 0xf8007000 to cf86e000
    [drm] Initialized drm 1.1.0 20060810
    brd: module loaded
    loop: module loaded
    CAN device driver interface
    e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k
    e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
    libphy: XEMACPS mii bus: probed
    [Firmware Warn]: /amba@0/ps7-ethernet@e000b000/mdio/phy@0: Whitelisted compatible string. Please remove
    xemacps e000b000.ps7-ethernet: pdev->id -1, baseaddr 0xe000b000, irq 31
    ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
    ehci-pci: EHCI PCI platform driver
    usbcore: registered new interface driver usb-storage
    mousedev: PS/2 mouse device common for all mice
    i2c /dev entries driver
    Xilinx Zynq CpuIdle Driver started
    sdhci: Secure Digital Host Controller Interface driver
    sdhci: Copyright(c) Pierre Ossman
    sdhci-pltfm: SDHCI platform and OF driver helper
    mmc0: SDHCI controller on e0100000.ps7-sdio [e0100000.ps7-sdio] using ADMA
    ledtrig-cpu: registered to indicate activity on CPUs
    usbcore: registered new interface driver usbhid
    usbhid: USB HID core driver
    nand: device found, Manufacturer ID: 0x2c, Chip ID: 0xda
    nand: Micron MT29F2G08ABAEAWP
    nand: 256 MiB, SLC, erase size: 128 KiB, page size: 2048, OOB size: 64
    nand: WARNING: pl35x-nand: the ECC used on your system is too weak compared to the one required by the NAND chip
    Bad block table found at page 131008, version 0x01
    Bad block table found at page 130944, version 0x01
    nand_read_bbt: bad block at 0x000007960000
    nand_read_bbt: bad block at 0x00000cb00000
    3 ofpart partitions found on MTD device pl35x-nand
    Creating 3 MTD partitions on "pl35x-nand":
    0x000000000000-0x000002800000 : "BOOT.bin-env-dts-kernel"
    mmc0: Problem switching card into high-speed mode!
    0x000002800000-0x000004800000 : "ramfs"
    mmc0: new SDHC card at address 0001
    0x000004800000-0x000005000000 : "configs"
    mmcblk0: mmc0:0001 AS 3.72 GiB 
     mmcblk0: p1
    NET: Registered protocol family 10
    sit: IPv6 over IPv4 tunneling driver
    NET: Registered protocol family 17
    can: controller area network core (rev 20120528 abi 9)
    NET: Registered protocol family 29
    can: raw protocol (rev 20120528)
    can: broadcast manager protocol (rev 20120528 t)
    can: netlink gateway (rev 20130117) max_hops=1
    zynq_pm_ioremap: no compatible node found for 'xlnx,zynq-ddrc-a05'
    zynq_pm_late_init: Unable to map DDRC IO memory.
    Registering SWP/SWPB emulation handler
    hctosys: unable to open rtc device (rtc0)
    ALSA device list:
      No soundcards found.
    RAMDISK: gzip image found at block 0
    EXT4-fs (ram0): couldn't mount as ext3 due to feature incompatibilities
    EXT4-fs (ram0): mounted filesystem without journal. Opts: (null)
    VFS: Mounted root (ext4 filesystem) on device 1:0.
    devtmpfs: mounted
    Freeing unused kernel memory: 1024K (c0800000 - c0900000)
    INIT: version 2.88 booting
    start banner.sh
    start mountdevtmpfs.sh
    mount: mounting devtmpfs on /dev failed: Device or resource busy
    Starting Bootlog daemon: bootlogd: cannot allocate pseudo tty: No such file or directory
    bootlogd.
    Starting Monitor-ipsig daemon: monitor-ipsig.
    EXT4-fs (ram0): re-mounted. Opts: block_validity,delalloc,barrier,user_xattr
    random: dd urandom read with 2 bits of entropy available
    start mountall.sh
    check mouted config
    mounting config
    jffs2: jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00000000: 0x4255 instead
    jffs2: jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00000004: 0x0001 instead
    jffs2: jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00000018: 0xd72e instead
    jffs2: jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x0000003c: 0x7e1e instead
    jffs2: jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00020000: 0x4255 instead
    jffs2: jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00020004: 0x0001 instead
    jffs2: jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00020018: 0xd72e instead
    jffs2: jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x0002003c: 0x7e1e instead
    jffs2: jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00040000: 0x4255 instead
    jffs2: jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00040004: 0x0001 instead
    jffs2: jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00040018: 0xd72e instead
    jffs2: jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x0004003c: 0x7e1e instead
    jffs2: jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00060000: 0x4255 instead
    jffs2: jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00060004: 0x0001 instead
    jffs2: jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00060018: 0xd72e instead
    jffs2: jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x0006003c: 0x7e1e instead
    jffs2: jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00080000: 0x4255 instead
    jffs2: jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00080004: 0x0001 instead
    jffs2: jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00080018: 0xd72e instead
    jffs2: jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x0008003c: 0x7e1e instead
    jffs2: jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x000a0000: 0x4255 instead
    jffs2: jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x000a0004: 0x0001 instead
    jffs2: jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x000a0018: 0xd72e instead
    jffs2: jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x000a003c: 0x7e1e instead
    jffs2: jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x000c0000: 0x4255 instead
    jffs2: jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x000c0004: 0x0001 instead
    jffs2: jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x000c0018: 0xd72e instead
    jffs2: jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x000c003c: 0x7e1e instead
    jffs2: jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x000e0000: 0x4255 instead
    jffs2: jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x000e0004: 0x0001 instead
    jffs2: jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x000e0018: 0xd72e instead
    jffs2: jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x000e003c: 0x7e1e instead
    jffs2: jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00100000: 0x4255 instead
    jffs2: jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00100004: 0x0001 instead
    jffs2: jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00100018: 0xd72e instead
    jffs2: jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x0010003c: 0x7e1e instead
    jffs2: jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00120000: 0x4255 instead
    jffs2: jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00120004: 0x0001 instead
    jffs2: jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00120018: 0xd72e instead
    jffs2: jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x0012003c: 0x7e1e instead
    jffs2: jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00140000: 0x4255 instead
    jffs2: jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00140004: 0x0001 instead
    jffs2: jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00140018: 0xd72e instead
    jffs2: jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x0014003c: 0x7e1e instead
    jffs2: jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00160000: 0x4255 instead
    jffs2: jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00160004: 0x0001 instead
    jffs2: jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00160018: 0xd72e instead
    jffs2: jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x0016003c: 0x7e1e instead
    jffs2: jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00180000: 0x4255 instead
    jffs2: jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00180004: 0x0001 instead
    jffs2: jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00180018: 0xd72e instead
    jffs2: jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x0018003c: 0x7e1e instead
    jffs2: jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x001a0000: 0x4255 instead
    jffs2: jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x001a0004: 0x0001 instead
    jffs2: jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x001a0018: 0xd72e instead
    jffs2: jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x001a003c: 0x7e1e instead
    jffs2: jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x001c0000: 0x4255 instead
    jffs2: jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x001c0004: 0x0001 instead
    jffs2: jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x001c0018: 0xd72e instead
    jffs2: jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x001c003c: 0x7e1e instead
    jffs2: jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x001e0000: 0x4255 instead
    jffs2: jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x001e0004: 0x0001 instead
    jffs2: jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x001e0018: 0xd72e instead
    jffs2: jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x001e003c: 0xb521 instead
    jffs2: jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00200000: 0x4255 instead
    jffs2: jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00200004: 0x0001 instead
    jffs2: jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00200018: 0xd72e instead
    jffs2: jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x0020003c: 0xb521 instead
    jffs2: jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00220000: 0x4255 instead
    jffs2: jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00220004: 0x0001 instead
    jffs2: jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00220018: 0xd72e instead
    jffs2: jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x0022003c: 0xe8bd instead
    jffs2: Empty flash at 0x00220040 ends at 0x00220800
    jffs2: jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00220800: 0x4255 instead
    jffs2: jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00220804: 0x0101 instead
    jffs2: jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00220808: 0xff7f instead
    jffs2: jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00220820: 0x8a41 instead
    jffs2: jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x0022083c: 0x9f96 instead
    jffs2: jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x0022100c: 0x0001 instead
    jffs2: Further such events for this erase block will not be printed
    jffs2: jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00240000: 0x4255 instead
    jffs2: jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00240004: 0x0001 instead
    jffs2: jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00240018: 0xd72e instead
    jffs2: jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x0024003c: 0xe8bd instead
    jffs2: Empty flash at 0x00240040 ends at 0x00240800
    jffs2: jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00240800: 0x4255 instead
    jffs2: jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00240804: 0x0101 instead
    jffs2: jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00240808: 0xff7f instead
    jffs2: jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00240820: 0x8a41 instead
    jffs2: jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x0024083c: 0xc388 instead
    jffs2: jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x0024100c: 0x0001 instead
    jffs2: Further such events for this erase block will not be printed
    jffs2: jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00260000: 0x4255 instead
    jffs2: jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00260004: 0x0001 instead
    jffs2: jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00260018: 0xd72e instead
    jffs2: jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x0026003c: 0xe8bd instead
    jffs2: Empty flash at 0x00260040 ends at 0x00260800
    jffs2: jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00260800: 0x4255 instead
    jffs2: jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00260804: 0x0101 instead
    jffs2: jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00260820: 0x2fb1 instead
    jffs2: jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x0026083c: 0xacb1 instead
    jffs2: jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00261000: 0x4019 instead
    jffs2: jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00261004: 0x03eb instead
    jffs2: Further such events for this erase block will not be printed
    jffs2: Empty flash at 0x0026104c ends at 0x00261800
    jffs2: Empty flash at 0x00261828 ends at 0x00262000
    jffs2: Empty flash at 0x00262028 ends at 0x00262800
    jffs2: Empty flash at 0x00262828 ends at 0x00263000
    jffs2: Empty flash at 0x00263028 ends at 0x00263800
    jffs2: Empty flash at 0x00263828 ends at 0x00264000
    jffs2: Empty flash at 0x00264028 ends at 0x00264800
    jffs2: Empty flash at 0x00264828 ends at 0x00265000
    jffs2: Empty flash at 0x00265028 ends at 0x00265800
    jffs2: Empty flash at 0x00265828 ends at 0x00266000
    jffs2: Empty flash at 0x00266028 ends at 0x00266800
    jffs2: Empty flash at 0x00266828 ends at 0x00267000
    jffs2: Empty flash at 0x00267028 ends at 0x00267800
    jffs2: Empty flash at 0x00267828 ends at 0x00268000
    jffs2: Empty flash at 0x00268028 ends at 0x00268800
    jffs2: Empty flash at 0x00268828 ends at 0x00269000
    jffs2: Empty flash at 0x00269028 ends at 0x00269800
    jffs2: Empty flash at 0x00269828 ends at 0x0026a000
    jffs2: Empty flash at 0x0026a028 ends at 0x0026a800
    jffs2: Empty flash at 0x0026a828 ends at 0x0026b000
    jffs2: jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00280000: 0x4255 instead
    jffs2: jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00280004: 0x0001 instead
    jffs2: jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00280018: 0xd72e instead
    jffs2: jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x0028003c: 0xe8bd instead
    jffs2: Empty flash at 0x00280040 ends at 0x00280800
    jffs2: jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00280800: 0x4255 instead
    jffs2: jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00280804: 0x0101 instead
    jffs2: jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x0028083c: 0x08b3 instead
    jffs2: jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00281000: 0x1831 instead
    jffs2: jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00281004: 0xead9 instead
    jffs2: jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00281008: 0x0001 instead
    jffs2: Further such events for this erase block will not be printed
    jffs2: jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x002a0000: 0x4255 instead
    jffs2: jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x002a0004: 0x0001 instead
    jffs2: jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x002a0018: 0xd72e instead
    jffs2: jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x002a003c: 0xe8bd instead
    jffs2: Empty flash at 0x002a0040 ends at 0x002a0800
    jffs2: jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x002a0800: 0x4255 instead
    jffs2: jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x002a0804: 0x0101 instead
    jffs2: jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x002a083c: 0x08cd instead
    jffs2: jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x002a1000: 0x1831 instead
    jffs2: jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x002a1004: 0xb361 instead
    jffs2: jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x002a1008: 0x0002 instead
    jffs2: Further such events for this erase block will not be printed
    jffs2: jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x002c0000: 0x4255 instead
    jffs2: jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x002c0004: 0x0001 instead
    jffs2: jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x002c0018: 0xd72e instead
    jffs2: jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x002c003c: 0xe8bd instead
    jffs2: Empty flash at 0x002c0040 ends at 0x002c0800
    jffs2: jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x002c0800: 0x4255 instead
    jffs2: jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x002c0804: 0x0101 instead
    jffs2: jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x002c083c: 0x094f instead
    jffs2: jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x002c1000: 0x1831 instead
    jffs2: jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x002c1004: 0x467c instead
    jffs2: jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x002c1008: 0x0003 instead
    jffs2: Further such events for this erase block will not be printed
    jffs2: jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x002e0000: 0x4255 instead
    jffs2: jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x002e0004: 0x0001 instead
    jffs2: jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x002e0018: 0xd72e instead
    jffs2: jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x002e003c: 0xe8bd instead
    jffs2: Empty flash at 0x002e0040 ends at 0x002e0800
    jffs2: jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x002e0800: 0x4255 instead
    jffs2: jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x002e0804: 0x0101 instead
    jffs2: jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x002e083c: 0xb2b1 instead
    jffs2: jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x002e1000: 0x1831 instead
    jffs2: jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x002e1004: 0x56c0 instead
    jffs2: jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x002e1008: 0x0004 instead
    jffs2: Further such events for this erase block will not be printed
    jffs2: jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00300000: 0x4255 instead
    jffs2: jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00300004: 0x0001 instead
    jffs2: jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00300018: 0xd72e instead
    jffs2: jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x0030003c: 0xb521 instead
    jffs2: jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00320000: 0x4255 instead
    jffs2: jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00320004: 0x0001 instead
    jffs2: jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00320018: 0xd72e instead
    jffs2: jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x0032003c: 0xb521 instead
    jffs2: jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00340000: 0x4255 instead
    jffs2: jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00340004: 0x0001 instead
    jffs2: jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00340018: 0xd72e instead
    jffs2: jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x0034003c: 0xb521 instead
    jffs2: jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00360000: 0x4255 instead
    jffs2: jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00360004: 0x0001 instead
    jffs2: jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00360018: 0xd72e instead
    jffs2: jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x0036003c: 0xb521 instead
    jffs2: jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00380000: 0x4255 instead
    jffs2: jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00380004: 0x0001 instead
    jffs2: jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00380018: 0xd72e instead
    jffs2: jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x0038003c: 0xb521 instead
    jffs2: jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x003a0000: 0x4255 instead
    jffs2: jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x003a0004: 0x0001 instead
    jffs2: jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x003a0018: 0xd72e instead
    jffs2: jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x003a003c: 0xb521 instead
    jffs2: jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x003c0000: 0x4255 instead
    jffs2: jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x003c0004: 0x0001 instead
    jffs2: jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x003c0018: 0xd72e instead
    jffs2: jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x003c003c: 0xb521 instead
    jffs2: jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x003e0000: 0x4255 instead
    jffs2: jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x003e0004: 0x0001 instead
    jffs2: jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x003e0018: 0xd72e instead
    jffs2: jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x003e003c: 0xb521 instead
    jffs2: jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00400000: 0x4255 instead
    jffs2: jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00400004: 0x0001 instead
    jffs2: jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00400018: 0xd72e instead
    jffs2: jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x0040003c: 0xb521 instead
    jffs2: jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00420000: 0x4255 instead
    jffs2: jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00420004: 0x0001 instead
    jffs2: jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00420018: 0xd72e instead
    jffs2: jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x0042003c: 0xb521 instead
    jffs2: jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00440000: 0x4255 instead
    jffs2: jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00440004: 0x0001 instead
    jffs2: jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00440018: 0xd72e instead
    jffs2: jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x0044003c: 0xb521 instead
    jffs2: jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00460000: 0x4255 instead
    jffs2: jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00460004: 0x0001 instead
    jffs2: jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00460018: 0xd72e instead
    jffs2: jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x0046003c: 0xb521 instead
    jffs2: jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00480000: 0x4255 instead
    jffs2: jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00480004: 0x0001 instead
    jffs2: jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00480018: 0xd72e instead
    jffs2: jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x0048003c: 0xb521 instead
    jffs2: jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x004a0000: 0x4255 instead
    jffs2: jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x004a0004: 0x0001 instead
    jffs2: jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x004a0018: 0xd72e instead
    jffs2: jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x004a003c: 0xb521 instead
    jffs2: jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x004c0000: 0x4255 instead
    jffs2: jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x004c0004: 0x0001 instead
    jffs2: jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x004c0018: 0xd72e instead
    jffs2: jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x004c003c: 0xb521 instead
    jffs2: jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x004e0000: 0x4255 instead
    jffs2: jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x004e0004: 0x0001 instead
    jffs2: jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x004e0018: 0xd72e instead
    jffs2: jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x004e003c: 0x7e1e instead
    jffs2: jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x004e0800: 0x4255 instead
    jffs2: jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x004e0804: 0x0101 instead
    jffs2: jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x004e0820: 0x0630 instead
    jffs2: jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x004e083c: 0x2dee instead
    jffs2: jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x004e1000: 0x1831 instead
    jffs2: jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x004e1004: 0x4d16 instead
    jffs2: Further such events for this erase block will not be printed
    jffs2: jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00500000: 0x4255 instead
    jffs2: jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00500004: 0x0001 instead
    jffs2: jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00500018: 0xd72e instead
    jffs2: jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x0050003c: 0x7e1e instead
    jffs2: jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00500800: 0x4255 instead
    jffs2: jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00500804: 0x0101 instead
    jffs2: jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00500820: 0x5181 instead
    jffs2: jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x0050083c: 0x3b67 instead
    jffs2: jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00501000: 0x1831 instead
    jffs2: jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00501004: 0x48a7 instead
    jffs2: Further such events for this erase block will not be printed
    jffs2: Empty flash at 0x0050103c ends at 0x00501040
    jffs2: Empty flash at 0x00501374 ends at 0x00501378
    jffs2: Empty flash at 0x005013b4 ends at 0x005013b8
    jffs2: Empty flash at 0x0050183c ends at 0x00501840
    jffs2: Empty flash at 0x00501b74 ends at 0x00501b78
    jffs2: Empty flash at 0x00501bb4 ends at 0x00501bb8
    jffs2: Empty flash at 0x0050203c ends at 0x00502040
    jffs2: Empty flash at 0x00502374 ends at 0x00502378
    jffs2: Empty flash at 0x005023b4 ends at 0x005023b8
    jffs2: Empty flash at 0x0050303c ends at 0x00503040
    jffs2: Empty flash at 0x00503374 ends at 0x00503378
    jffs2: Empty flash at 0x005033b4 ends at 0x005033b8
    jffs2: Empty flash at 0x005041dc ends at 0x005041e0
    jffs2: Empty flash at 0x0050483c ends at 0x00504840
    jffs2: Empty flash at 0x00504b74 ends at 0x00504b78
    jffs2: Empty flash at 0x00504bb4 ends at 0x00504bb8
    jffs2: jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00520000: 0x4255 instead
    jffs2: jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00520004: 0x0001 instead
    jffs2: jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00520018: 0xd72e instead
    jffs2: jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x0052003c: 0xb521 instead
    jffs2: jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00540000: 0x4255 instead
    jffs2: jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00540004: 0x0001 instead
    jffs2: jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00540018: 0xd72e instead
    jffs2: jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x0054003c: 0xb521 instead
    jffs2: jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00560000: 0x4255 instead
    jffs2: jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00560004: 0x0001 instead
    jffs2: jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00560018: 0xd72e instead
    jffs2: jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x0056003c: 0x7e1e instead
    jffs2: jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00560800: 0x4255 instead
    jffs2: jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00560804: 0x0101 instead
    jffs2: jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x0056083c: 0xbe65 instead
    jffs2: jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00561000: 0x1831 instead
    jffs2: jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00561004: 0x731f instead
    jffs2: jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00561008: 0x01af instead
    jffs2: Further such events for this erase block will not be printed
    jffs2: jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00580000: 0x4255 instead
    jffs2: jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00580004: 0x0001 instead
    jffs2: jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00580018: 0xd72e instead
    jffs2: jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x0058003c: 0x7e1e instead
    jffs2: jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x005a0000: 0x4255 instead
    jffs2: jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x005a0004: 0x0001 instead
    jffs2: jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x005a0018: 0xd72e instead
    jffs2: jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x005a003c: 0x7e1e instead
    jffs2: jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x005c0000: 0x4255 instead
    jffs2: jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x005c0004: 0x0001 instead
    jffs2: jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x005c0018: 0xd72e instead
    jffs2: jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x005c003c: 0x7e1e instead
    jffs2: jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x005e0000: 0x4255 instead
    jffs2: jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x005e0004: 0x0001 instead
    jffs2: jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x005e0018: 0xd72e instead
    jffs2: jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x005e003c: 0x7e1e instead
    jffs2: jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00600000: 0x4255 instead
    jffs2: jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00600004: 0x0001 instead
    jffs2: jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00600018: 0xd72e instead
    jffs2: jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x0060003c: 0x7e1e instead
    jffs2: jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00620000: 0x4255 instead
    jffs2: jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00620004: 0x0001 instead
    jffs2: jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00620018: 0xd72e instead
    jffs2: jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x0062003c: 0x7e1e instead
    jffs2: jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00640000: 0x4255 instead
    jffs2: jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00640004: 0x0001 instead
    jffs2: jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00640018: 0xd72e instead
    jffs2: jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x0064003c: 0x7e1e instead
    jffs2: jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00660000: 0x4255 instead
    jffs2: jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00660004: 0x0001 instead
    jffs2: jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00660018: 0xd72e instead
    jffs2: jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x0066003c: 0x7e1e instead
    jffs2: jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00680000: 0x4255 instead
    jffs2: jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00680004: 0x0001 instead
    jffs2: jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00680018: 0xd72e instead
    jffs2: jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x0068003c: 0x7e1e instead
    jffs2: jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x006a0000: 0x4255 instead
    jffs2: jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x006a0004: 0x0001 instead
    jffs2: jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x006a0018: 0xd72e instead
    jffs2: jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x006a003c: 0x7e1e instead
    jffs2: jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x006c0000: 0x4255 instead
    jffs2: jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x006c0004: 0x0001 instead
    jffs2: jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x006c0018: 0xd72e instead
    jffs2: jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x006c003c: 0x7e1e instead
    jffs2: jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x006e0000: 0x4255 instead
    jffs2: jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x006e0004: 0x0001 instead
    jffs2: jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x006e0018: 0xd72e instead
    jffs2: jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x006e003c: 0x7e1e instead
    jffs2: jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00700000: 0x4255 instead
    jffs2: jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00700004: 0x0001 instead
    jffs2: jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00700018: 0xd72e instead
    jffs2: jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x0070003c: 0x7e1e instead
    jffs2: jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00720000: 0x4255 instead
    jffs2: jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00720004: 0x0001 instead
    jffs2: jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00720018: 0xd72e instead
    jffs2: jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x0072003c: 0x7e1e instead
    jffs2: jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00740000: 0x4255 instead
    jffs2: jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00740004: 0x0001 instead
    jffs2: jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00740018: 0xd72e instead
    jffs2: jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x0074003c: 0x7e1e instead
    jffs2: jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00760000: 0x4255 instead
    jffs2: jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00760004: 0x0001 instead
    jffs2: jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00760018: 0xd72e instead
    jffs2: jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x0076003c: 0x7e1e instead
    jffs2: jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00780000: 0x4255 instead
    jffs2: jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00780004: 0x0001 instead
    jffs2: jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00780018: 0xd72e instead
    jffs2: jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x0078003c: 0x7e1e instead
    jffs2: jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x007a0000: 0x4255 instead
    jffs2: jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x007a0004: 0x0001 instead
    jffs2: jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x007a0018: 0xd72e instead
    jffs2: jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x007a003c: 0x7e1e instead
    jffs2: jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x007c0000: 0x4255 instead
    jffs2: jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x007c0004: 0x0001 instead
    jffs2: jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x007c0018: 0xd72e instead
    jffs2: jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x007c003c: 0x7e1e instead
    jffs2: jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x007e0000: 0x4255 instead
    jffs2: jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x007e0004: 0x0001 instead
    jffs2: jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x007e0018: 0xd72e instead
    jffs2: jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x007e003c: 0x7e1e instead
    jffs2: Cowardly refusing to erase blocks on filesystem with no valid JFFS2 nodes
    jffs2: empty_blocks 0, bad_blocks 0, c->nr_blocks 64
    mount: mounting /dev/mtdblock2 on /config/ failed: Input/output error
    Starting syslogd/klogd: done
    killall: udhcpc: no process killed
    IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
    udhcpc (v1.20.2) started
    Sending discover...
    xemacps e000b000.ps7-ethernet: Set clk to 0 Hz
    xemacps e000b000.ps7-ethernet: link up (100/FULL)
    IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
    Sending discover...
    Sending discover...
    Sending discover...
    Sending discover...
    Sending discover...
    Sending discover...
    Sending select for 192.168.1.161...
    Lease of 192.168.1.161 obtained, lease time 86400
    /etc/udhcpc.d/50default: Adding DNS 192.168.1.1
    13 Feb 16:12:15 ntpdate[898]: step time server 93.126.3.22 offset 1644768700.701518 sec
    Starting Dropbear SSH server: Will output 1024 bit rsa secret key to '/config/dropbear_rsa_host_key'
    Generating key, this may take a while...
    Public key portion is:
    ssh-rsa AAAAB3NzaC1yc2EAAAADAQABAAAAgmEfAtg723TNFH3OscrmEGbsbXK3HtP8cvklC42kIy3X073wYGs/7dyIpUKJN+943z+wmHCvuCb87Ucc+SMJphxe7EmUo3ImoPoNHRZEd0iUw4eCCo9l762aegKfMDW5pwTBU218bldb5YFvRePZehQQsaT9rZ9GB5JN6XRkENft1uE= root@antMiner
    Fingerprint: md5 51:8d:19:28:7b:16:94:85:20:41:e7:63:4c:70:d4:36
    dropbear.
    Starting ntpd: done
    Starting Avahi Daemon: avahi-daemon.
    Starting Lighttpd Web Server: lighttpd.
    start cgminer.sh
    FAT-fs (mmcblk0p1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
    Starting Cgminer daemon: 192.168.1.1 is reachable
    No bitmain_axi.ko
    In axi fpga driver!
    request_mem_region OK!
    AXI fpga dev virtual address is 0xcf9a8000
    *base_vir_addr = 0xfb011
    FUNCTION_SETTING

    SET_ENTRY_POINT

    DISPLAY_STATUS

    CLEAR_DISPLAY

    SET_ADDRESS_BACK

    SET_DDRAM_ADDRESS

    bitmain-lcd: success to register device
    memory_size = 235792
    fpga_mem_offset_addr=0x0F000000
    In fpga mem driver!
    request_mem_region OK!
    fpga mem virtual address is 0xd2000000
    single-board-test start
    cgminer.
    export_store: invalid GPIO 46
    sh: write error: Invalid argument
    mmap axi_fpga_addr = 0xb6f09000
    axi_fpga_addr data = 0xb011
    mmap fpgbitmain lcd opened!
    a_mem_addr = 0xb5d97000
    set_nonce2_and_job_id_store_address: set NONCE2_AND_JOBID_STORE_ADDRESS is 0x3f000000
    INIT: Entering runlevel: 5

    ---read_config: gHashBoard_S9


    ---read_config: Conf.DataCount = 912

    read_config: sensor_model = 3, DEVICEADDR = 0x00980000
    get_works: loop = 63
    Stopping Bootlog daemon: bootlogd.

    .---O---.                                           
    |       |                  .-.           o o        
    |   |   |-----.-----.-----.| |   .----..-----.-----.
    |       |     | __  |  ---'| '--.|  .-'|     |     |
    |   |   |  |  |     |---  ||  --'|  |  |  '  | | | |
    '---'---'--'--'--.  |-----''----''--'  '-----'-'-'-'
                    -'  |
                    '---'

    The Angstrom Distribution antMiner ttyPS0

    Angstrom v2013.06 - Kernel 4.6.0-xilinx-g99349d0-dirty

    antMiner login: min work minertest[0]:3648



     

     

    and here is the serial data from test fixture when connecting a good hashboard:


                                              --- key down: 
                                                            --- singleBoardTest_S9_BM1387_63


                                                                                            --- get time
                                                                                                        Socket initialisation ok
                                                                                                                                Socket connect ok
                                                                                                                                                 year:2022, month:02, day:13
                                                                                                                                                                            hour:16, minute:15, second:23
                    change_time_format: year = 0x22
                                                   change_time_format: month = 0x02
                                                                                   change_time_format: day = 0x13
                                                                                                                 change_time_format: hour = 0x16
                                                                                                                                                change_time_format: minute = 0x15
                                                                                                                                                                                 change_time_format: second = 0x23

                             begin test time
                                            Sun Feb 13 16:15:23 UTC 2022

                                                                        --- init_fpga

                                                                                     --- read_id


                                                                                                --- FPGA chip id:    low: 0x79104814, high: 0x800c8c46
                                                                                                                                                      ts.tv_sec = 0x62092e9b
                                                                                                                                                                            ts.tv_usec = 0x0009f6cb
              rand_num = 0x000000d2
                                   --- read_id: hash_board_id[0] = 0x79
                                                                       --- read_id: hash_board_id[1] = 0x10
                                                                                                           --- read_id: hash_board_id[2] = 0x48
                                                                                                                                               --- read_id: hash_board_id[3] = 0x14
                                                                                                                                                                                   --- read_id: hash_board_id[4] = 0x62
                                  --- read_id: hash_board_id[5] = 0x09
                                                                      --- read_id: hash_board_id[6] = 0x2e
                                                                                                          --- read_id: hash_board_id[7] = 0x9b
                                                                                                                                              --- read_id: hash_board_id[8] = 0xd2
                                                                                                                                                                                  --- read_id: hash_board_id[9] = 0x09
                                 --- read_id: hash_board_id[10] = 0xf6
                                                                      --- read_id: hash_board_id[11] = 0xcb

                                                                                                           --- check_chain
                                                                                                                          get_hash_on_plug: HASH_ON_PLUG is 0x1
                                                                                                                                                               check_chain: gChain = 0
                                                                                                                                                                                      reset_iic_pic
              jump_to_app_from_loader

                                     --- set_hash_board_id_number
                                                                 --- send pic heart beat ... 

                                                                                             --- set pic voltage
                                                                                                                conf.Pic = 1
                                                                                                                            conf.IICPic = 1
                                                                                                                                           conf.dac = 1
                                                                                                                                                       temp_voltage = 91.651323
                                                                                                                                                                               set_pic_voltage
         set_Hash_board_voltage_BM1387_63: conf.Voltage1 = 890
                                                              set_Hash_board_voltage_BM1387_63: pic_voltage1 = 91

                                                                                                                 --- enable_pic_dac
                                                                                                                                   --- reset_hash_board

                                                                                                                                                       --- set command mode
                                                                                                                                                                           get_dhash_acc_control: DHASH_ACC_CONTROL is 0x20
                                      set_dhash_acc_control: set DHASH_ACC_CONTROL is 0x8100
                                                                                            get_dhash_acc_control: DHASH_ACC_CONTROL is 0x8100
                                                                                                                                              set command mode to VIL

                                                                                                                                                                     singleBoardTest_S9_BM1387_63: AsicType = 1387

                             singleBoardTest_S9_BM1387_63: asicNum = 64

                                                                       singleBoardTest_S9_BM1387_63: real AsicNum = 63

                                                                                                                      --- check asic number
                                                                                                                                           check_asic_reg: check chain J1 
                                                                                                                                                                          check_asic_reg: no asic address register come back for 1 time.
                                                   check_asic_reg: no asic address register come back for 2 time.
                                                                                                                 check_asic_reg: no asic address register come back for 3 time.
                                                                                                                                                                               check_asic_reg: chain J1 has 63 ASIC
                              check chain: asicNum = 63

                                                       double check ASIC number

                                                                               --- set_baud
                                                                                           set_baud: cmd_buf[0]=0x5809001c, cmd_buf[1]=0x40200000, cmd_buf[2]=0x17000000
                                                                                                                                                                        set_baud: system baudrate is: 0x0
                    --- init_fpga
                                 --- reset_hash_board
                                                     --- send pic heart beat ... 

                                                                                 --- set command mode
                                                                                                     get_dhash_acc_control: DHASH_ACC_CONTROL is 0x20
                                                                                                                                                     set_dhash_acc_control: set DHASH_ACC_CONTROL is 0x8100
                      get_dhash_acc_control: DHASH_ACC_CONTROL is 0x8100
                                                                        set command mode to VIL

                                                                                               --- check asic number
                                                                                                                    check_asic_reg: check chain J1 
                                                                                                                                                   check_asic_reg: no asic address register come back for 1 time.
                            check_asic_reg: no asic address register come back for 2 time.
                                                                                          check_asic_reg: no asic address register come back for 3 time.
                                                                                                                                                        check_asic_reg: chain J1 has 63 ASIC
       check chain: asicNum = 63
                                double check ASIC number end

                                                            singleBoardTest_S9_BM1387_63: core_num = 114

                                                                                                        singleBoardTest_S9_BM1387_63: ValidNonce1 = 57456

                                                                                                                                                         --- set_frequency
                                                                                                                                                                          get_plldata: i = 22, sizeof(freq_pll_1385)/sizeof(freq_pll_1385[0]) = 124
                                                              Freq 400, PLL1 00080040, PLL2 0420, vilpll 800241
                                                                                                               PLL1 0x80040, PLL2 0x420, vilpll 0x800241
                                                                                                                                                        set_frequency: frequency = 400
                                                                                                                                                                                      set_frequency: cmd_buf[0] = 0x5809000c, cmd_buf[1] = 0x800241, cmd_buf[2] = 0x8000000

                                                                                      --- software_set_address
                                                                                                              software_set_address: cgpu.addrInterval = 4
                                                                                                                                                         software_set_address: chain 0 has 63 ASIC, and addrInterval is 4
                                    chain_inactive: buf[0]=0x55, buf[1]=0x5, buf[2]=0x0, buf[3]=0x0, buf[4]=0x10

                                                                                                                --- enable_extended_mode_of_temperature_sensor
                                                                                                                                                              read_temperature_time = 1, ret = 0x01000000
                    enable_extended_mode_of_temperature_sensor: Can't set extended mode. ret = 0x41980900

                                                                                                         --- write_sensor_info_into_pic

                                                                                                                                       --- set_temperature_offset_value
                                                                                                                                                                       singleBoardTest_S9_BM1387_63: conf.baud = 0

                             --- set_baud
                                         set_baud: cmd_buf[0]=0x5809001c, cmd_buf[1]=0x40200000, cmd_buf[2]=0x17000000
                                                                                                                      set_baud: system baudrate is: 0x0

                                                                                                                                                       --- set timeout 50000
                                                                                                                                                                            set_time_out_control: set TIME_OUT_CONTROL is 0xc350
                                           get_time_out_control: TIME_OUT_CONTROL is 0xc350

                                                                                           --- open_core
                                                                                                        get_dhash_acc_control: DHASH_ACC_CONTROL is 0x8100
                                                                                                                                                          set_dhash_acc_control: set DHASH_ACC_CONTROL is 0x8100
                           get_dhash_acc_control: DHASH_ACC_CONTROL is 0x8100
                                                                             set_hash_counting_number: set DHASH_ACC_CONTROL is 0x0
                                                                                                                                   get_hash_counting_number: DHASH_ACC_CONTROL is 0x0
                                                                                                                                                                                     open_core: Conf.CoreNum = 114
                             open_core: gateblk: cmd_buf[0] = 0x5809001c, cmd_buf[1] = 0x40208080, cmd_buf[2] = 0x15000000
                                                                                                                          disable null work: ret = 0x00800000
                                                                                                                                                             enable null work: ret = 0x00c00000, loop = 114
                      --- open_core end

                                       --- set real timeout 458
                                                               set_time_out_control: set TIME_OUT_CONTROL is 0x1ca
                                                                                                                  get_time_out_control: TIME_OUT_CONTROL is 0x1ca

                                                                                                                                                                 Begin send test pattern
                                                                                                                                                                                        Sun Feb 13 16:15:43 UTC 2022

                               read_asic_temperature_TMP421_TMP431: do not read out ASIC 62 Hash Board & ASIC temperature. ret = 0x80000000


                                                                                                                                           gGlobalHighestTemp is 0

                                                                                                                                                                  --- send pic heart beat ... 
         read_asic_temperature_TMP421_TMP431: do not read out ASIC 62 Hash Board & ASIC temperature. ret = 0x80000000


                                                                                                                     gGlobalHighestTemp is 0

                                                                                                                                            read_asic_temperature_TMP421_TMP431: do not read out ASIC 62 Hash Board & ASIC temperature. ret = 0x80000000


                                                                   gGlobalHighestTemp is 0

                                                                                          read_asic_temperature_TMP421_TMP431: do not read out ASIC 62 Hash Board & ASIC temperature. ret = 0x80000000


                 gGlobalHighestTemp is 0

                                        read_asic_temperature_TMP421_TMP431: do not read out ASIC 62 Hash Board & ASIC temperature. ret = 0x80000000


                                                                                                                                                    gGlobalHighestTemp is 0

                                                                                                                                                                           read_asic_temperature_TMP421_TMP431: do not read out ASIC 62 Hash Board & ASIC temperature. ret = 0x80000000


                                                                                                  gGlobalHighestTemp is 0

                                                                                                                         read_asic_temperature_TMP421_TMP431: do not read out ASIC 62 Hash Board & ASIC temperature. ret = 0x80000000


                                                gGlobalHighestTemp is 0

                                                                       read_asic_temperature_TMP421_TMP431: do not read out ASIC 62 Hash Board & ASIC temperature. ret = 0x80000000


                                                                                                                                                                                   gGlobalHighestTemp is 0

                     read_asic_temperature_TMP421_TMP431: do not read out ASIC 62 Hash Board & ASIC temperature. ret = 0x80000000


                                                                                                                                 gGlobalHighestTemp is 0

                                                                                                                                                        read_asic_temperature_TMP421_TMP431: do not read out ASIC 62 Hash Board & ASIC temperature. ret = 0x80000000


                                                                               gGlobalHighestTemp is 0

                                                                                                      --- send pic heart beat ... 
                                                                                                                                  read_asic_temperature_TMP421_TMP431: do not read out ASIC 62 Hash Board & ASIC temperature. ret = 0x80000000


                                                         gGlobalHighestTemp is 0

                                                                                read_asic_temperature_TMP421_TMP431: do not read out ASIC 62 Hash Board & ASIC temperature. ret = 0x80000000


       gGlobalHighestTemp is 0

                              read_asic_temperature_TMP421_TMP431: do not read out ASIC 62 Hash Board & ASIC temperature. ret = 0x80000000


                                                                                                                                          gGlobalHighestTemp is 0

                                                                                                                                                                 read_asic_temperature_TMP421_TMP431: do not read out ASIC 62 Hash Board & ASIC temperature. ret = 0x80000000


                                                                                        gGlobalHighestTemp is 0

                                                                                                               read_asic_temperature_TMP421_TMP431: do not read out ASIC 62 Hash Board & ASIC temperature. ret = 0x80000000


                                      gGlobalHighestTemp is 0

                                                             read_asic_temperature_TMP421_TMP431: do not read out ASIC 62 Hash Board & ASIC temperature. ret = 0x80000000


                                                                                                                                                                         gGlobalHighestTemp is 0

           read_asic_temperature_TMP421_TMP431: do not read out ASIC 62 Hash Board & ASIC temperature. ret = 0x80000000


                                                                                                                       gGlobalHighestTemp is 0

                                                                                                                                              read_asic_temperature_TMP421_TMP431: do not read out ASIC 62 Hash Board & ASIC temperature. ret = 0x80000000


                                                                     gGlobalHighestTemp is 0

                                                                                            read_asic_temperature_TMP421_TMP431: do not read out ASIC 62 Hash Board & ASIC temperature. ret = 0x80000000


                   gGlobalHighestTemp is 0

                                          read_asic_temperature_TMP421_TMP431: do not read out ASIC 62 Hash Board & ASIC temperature. ret = 0x80000000


                                                                                                                                                      gGlobalHighestTemp is 0

                                                                                                                                                                             --- send pic heart beat ... 
                    read_asic_temperature_TMP421_TMP431: do not read out ASIC 62 Hash Board & ASIC temperature. ret = 0x80000000


                                                                                                                                gGlobalHighestTemp is 0

                                                                                                                                                       read_asic_temperature_TMP421_TMP431: do not read out ASIC 62 Hash Board & ASIC temperature. ret = 0x80000000


                                                                              gGlobalHighestTemp is 0

                                                                                                     read_asic_temperature_TMP421_TMP431: do not read out ASIC 62 Hash Board & ASIC temperature. ret = 0x80000000


                            gGlobalHighestTemp is 0

                                                   read_asic_temperature_TMP421_TMP431: do not read out ASIC 62 Hash Board & ASIC temperature. ret = 0x80000000


                                                                                                                                                               gGlobalHighestTemp is 0

                                                                                                                                                                                      read_asic_temperature_TMP421_TMP431: do not read out ASIC 62 Hash Board & ASIC temperature. ret = 0x80000000


                                                                                                             gGlobalHighestTemp is 0

                                                                                                                                    read_asic_temperature_TMP421_TMP431: do not read out ASIC 62 Hash Board & ASIC temperature. ret = 0x80000000


                                                           gGlobalHighestTemp is 0

                                                                                  read_asic_temperature_TMP421_TMP431: do not read out ASIC 62 Hash Board & ASIC temperature. ret = 0x80000000


         gGlobalHighestTemp is 0

                                read_asic_temperature_TMP421_TMP431: do not read out ASIC 62 Hash Board & ASIC temperature. ret = 0x80000000


                                                                                                                                            gGlobalHighestTemp is 0

                                                                                                                                                                   read_asic_temperature_TMP421_TMP431: do not read out ASIC 62 Hash Board & ASIC temperature. ret = 0x80000000


                                                                                          gGlobalHighestTemp is 0

                                                                                                                 read_asic_temperature_TMP421_TMP431: do not read out ASIC 62 Hash Board & ASIC temperature. ret = 0x80000000


                                        gGlobalHighestTemp is 0

                                                               --- send pic heart beat ... 
                                                                                           read_asic_temperature_TMP421_TMP431: do not read out ASIC 62 Hash Board & ASIC temperature. ret = 0x80000000


                  gGlobalHighestTemp is 0

                                         read_asic_temperature_TMP421_TMP431: do not read out ASIC 62 Hash Board & ASIC temperature. ret = 0x80000000


                                                                                                                                                     gGlobalHighestTemp is 0

                                                                                                                                                                            read_asic_temperature_TMP421_TMP431: do not read out ASIC 62 Hash Board & ASIC temperature. ret = 0x80000000


                                                                                                   gGlobalHighestTemp is 0

                                                                                                                          read_asic_temperature_TMP421_TMP431: do not read out ASIC 62 Hash Board & ASIC temperature. ret = 0x80000000


                                                 gGlobalHighestTemp is 0

                                                                        read_asic_temperature_TMP421_TMP431: do not read out ASIC 62 Hash Board & ASIC temperature. ret = 0x80000000


                                                                                                                                                                                    gGlobalHighestTemp is 0

                      read_asic_temperature_TMP421_TMP431: do not read out ASIC 62 Hash Board & ASIC temperature. ret = 0x80000000


                                                                                                                                  gGlobalHighestTemp is 0

                                                                                                                                                         read_asic_temperature_TMP421_TMP431: do not read out ASIC 62 Hash Board & ASIC temperature. ret = 0x80000000


                                                                                gGlobalHighestTemp is 0

                                                                                                       read_asic_temperature_TMP421_TMP431: do not read out ASIC 62 Hash Board & ASIC temperature. ret = 0x80000000


                              gGlobalHighestTemp is 0

                                                     read_asic_temperature_TMP421_TMP431: do not read out ASIC 62 Hash Board & ASIC temperature. ret = 0x80000000


                                                                                                                                                                 gGlobalHighestTemp is 0

                                                                                                                                                                                        --- send pic heart beat ... 
                               read_asic_temperature_TMP421_TMP431: do not read out ASIC 62 Hash Board & ASIC temperature. ret = 0x80000000


                                                                                                                                           gGlobalHighestTemp is 0

                                                                                                                                                                  get send work num :7182
                                                                                                                                                                                        send_func: number = 63, conf.dataCount = 114, Conf.pattern_repeat_num = 1

                                                                            send test pattern done
                                                                                                  Sun Feb 13 16:16:25 UTC 2022

                                                                                                                              read_asic_temperature_TMP421_TMP431: do not read out ASIC 62 Hash Board & ASIC temperature. ret = 0x80000000


                                                     gGlobalHighestTemp is 0

                                                                            read_asic_temperature_TMP421_TMP431: do not read out ASIC 62 Hash Board & ASIC temperature. ret = 0x80000000


                                                                                                                                                                                        gGlobalHighestTemp is 0

                          to stop receive

                                         ------------------------------------------------------------------------------------------------------
                                                                                                                                               Command mode is VIL
                                                                                                                                                                  require nonce number:114
     asic[00]=00    asic[01]=00    asic[02]=00    asic[03]=00    asic[04]=00    asic[05]=00    asic[06]=00    asic[07]=00    
                                                                                                                                    asic[08]=00    asic[09]=00    asic[10]=00    asic[11]=00    asic[12]=00    asic[13]=00    asic[14]=00    asic[15]=00    
                                                                            asic[16]=00    asic[17]=00    asic[18]=00    asic[19]=00    asic[20]=00    asic[21]=00    asic[22]=00 asic[23]=00    
                    asic[24]=00    asic[25]=00    asic[26]=00    asic[27]=00    asic[28]=00    asic[29]=00    asic[30]=00    asic[31]=00    
                                                                                                                                                    asic[32]=00    asic[33]=00    asic[34]=00    asic[35]=00    asic[36]=00    asic[37]=00    asic[38]=00    asic[39]=00    
                                                                                            asic[40]=00    asic[41]=00    asic[42]=00    asic[43]=00    asic[44]=00    asic[45]=00 asic[46]=00    asic[47]=00    
                                    asic[48]=00    asic[49]=00    asic[50]=00    asic[51]=00    asic[52]=00    asic[53]=00    asic[54]=00    asic[55]=00    
                                                                                                                                                                    asic[56]=00    asic[57]=00    asic[58]=00    asic[59]=00    asic[60]=00    asic[61]=00    asic[62]=00    


                                                                                            Below ASIC's core didn't receive all the nonce, they should receive 1 nonce each!

                                                                                                                                                                             asic[00]=00
                                                                                                                                                                                        core[000]=00    core[001]=00    core[002]=00    core[003]=00    core[004]=00    core[005]=00    core[006]=00    core[007]=00    
                                                                                                                                    core[008]=00    core[009]=00    core[010]=00    core[011]=00    core[012]=00    core[013]=00    core[014]=00    core[015]=00    
                                                                            core[016]=00    core[017]=00    core[018]=00    core[019]=00    core[020]=00    core[021]=00    core[022]=00core[023]=00    
                    core[024]=00    core[025]=00    core[026]=00    core[027]=00    core[028]=00    core[029]=00    core[030]=00    core[031]=00    
                                                                                                                                                    core[032]=00    core[033]=00    core[034]=00    core[035]=00    core[036]=00    core[037]=00    core[038]=00    core[039]=00    
                                                                                            core[040]=00    core[041]=00    core[042]=00    core[043]=00    core[044]=00    core[045]=00core[046]=00    core[047]=00    
                                    core[048]=00    core[049]=00    core[050]=00    core[051]=00    core[052]=00    core[053]=00    core[054]=00    core[055]=00    
                                                                                                                                                                    core[056]=00    core[057]=00    core[058]=00    core[059]=00    core[060]=00    core[061]=00    core[062]=00    core[063]=00    
                                                                                                            core[064]=00    core[065]=00    core[066]=00    core[067]=00    core[068]=00core[069]=00    core[070]=00    core[071]=00    
                                                    core[072]=00    core[073]=00    core[074]=00    core[075]=00    core[076]=00    core[077]=00    core[078]=00    core[079]=00    
                                                                                                                                                                                    core[080]=00    core[081]=00    core[082]=00    core[083]=00    core[084]=00    core[085]=00    core[086]=00    core[087]=00    
                                                                                                                            core[088]=00    core[089]=00    core[090]=00    core[091]=00core[092]=00    core[093]=00    core[094]=00    core[095]=00    
                                                                    core[096]=00    core[097]=00    core[098]=00    core[099]=00    core[100]=00    core[101]=00    core[102]=00    core[103]=00    
            core[104]=00    core[105]=00    core[106]=00    core[107]=00    core[108]=00    core[109]=00    core[110]=00    core[111]=00    
                                                                                                                                            core[112]=00    core[113]=00    


                                                                                                                                                                            asic[01]=00
                                                                                                                                                                                       core[000]=00    core[001]=00    core[002]=00    core[003]=00    core[004]=00    core[005]=00    core[006]=00    core[007]=00    
                                                                                                                                    core[008]=00    core[009]=00    core[010]=00    core[011]=00    core[012]=00    core[013]=00    core[014]=00    core[015]=00    
                                                                            core[016]=00    core[017]=00    core[018]=00    core[019]=00    core[020]=00    core[021]=00    core[022]=00core[023]=00    
                    core[024]=00    core[025]=00    core[026]=00    core[027]=00    core[028]=00    core[029]=00    core[030]=00    core[031]=00    
                                                                                                                                                    core[032]=00    core[033]=00    core[034]=00    core[035]=00    core[036]=00    core[037]=00    core[038]=00    core[039]=00    
                                                                                            core[040]=00    core[041]=00    core[042]=00    core[043]=00    core[044]=00    core[045]=00core[046]=00    core[047]=00    
                                    core[048]=00    core[049]=00    core[050]=00    core[051]=00    core[052]=00    core[053]=00    core[054]=00    core[055]=00    
                                                                                                                                                                    core[056]=00    core[057]=00    core[058]=00    core[059]=00    core[060]=00    core[061]=00    core[062]=00    core[063]=00    
                                                                                                            core[064]=00    core[065]=00    core[066]=00    core[067]=00    core[068]=00core[069]=00    core[070]=00    core[071]=00    
                                                    core[072]=00    core[073]=00    core[074]=00    core[075]=00    core[076]=00    core[077]=00    core[078]=00    core[079]=00    
                                                                                                                                                                                    core[080]=00    core[081]=00    core[082]=00    core[083]=00    core[084]=00    core[085]=00    core[086]=00    core[087]=00    
                                                                                                                            core[088]=00    core[089]=00    core[090]=00    core[091]=00core[092]=00    core[093]=00    core[094]=00    core[095]=00    
                                                                    core[096]=00    core[097]=00    core[098]=00    core[099]=00    core[100]=00    core[101]=00    core[102]=00    core[103]=00    
            core[104]=00    core[105]=00    core[106]=00    core[107]=00    core[108]=00    core[109]=00    core[110]=00    core[111]=00    
                                                                                                                                            core[112]=00    core[113]=00    

    then this will repeat for all cores and after that there is the message below:


                                                                                                                                                                                    ------------------------------------------------------------------------------------------------------

                                                                                                     temperature1 check error
                                                                                                                             total valid nonce number:0
                                                                                                                                                       total send work number:7182
                                                                                                                                                                                  require valid nonce number:7182
                            test pattern result = 0x00000000
                                                            test pattern valid_nonce_num = 0
                                                                                            1 pattern test failed, change to next voltage and freq
                                                                                                                                                  --- send pic heart beat ... 

    Realy appreciat if you can help me with this problem

    0
    Comment actions Permalink

Please sign in to leave a comment.