T17e only one hashboard working
Only one hashboard working on my t17e.
Kernel log:
CPU: 0 PID: 720 Comm: ubi_bgt1d Not tainted 4.6.0-xilinx-gff8137b-dirty #25
Hardware name: Xilinx Zynq Platform
[<c010e718>] (unwind_backtrace) from [<c010a8d0>] (show_stack+0x10/0x14)
[<c010a8d0>] (show_stack) from [<c02fcea4>] (dump_stack+0x84/0xa4)
[<c02fcea4>] (dump_stack) from [<c0405d64>] (ubi_io_read+0x1d4/0x2a8)
[<c0405d64>] (ubi_io_read) from [<c0406220>] (ubi_io_read_vid_hdr+0x6c/0x1d8)
[<c0406220>] (ubi_io_read_vid_hdr) from [<c0408280>] (wear_leveling_worker+0x1e0/0x6a0)
[<c0408280>] (wear_leveling_worker) from [<c0407770>] (do_work+0xcc/0x100)
[<c0407770>] (do_work) from [<c0408dc8>] (ubi_thread+0x100/0x190)
[<c0408dc8>] (ubi_thread) from [<c0132960>] (kthread+0xdc/0xf0)
[<c0132960>] (kthread) from [<c0106fb8>] (ret_from_fork+0x14/0x3c)
ubi1 warning: ubi_io_read: error -74 (ECC error) while reading 512 bytes from PEB 978:512, read only 512 bytes, retry
ubi1 warning: ubi_io_read: error -74 (ECC error) while reading 512 bytes from PEB 978:512, read only 512 bytes, retry
ubi1 warning: ubi_io_read: error -74 (ECC error) while reading 512 bytes from PEB 978:512, read only 512 bytes, retry
ubi1 error: ubi_io_read: error -74 (ECC error) while reading 512 bytes from PEB 978:512, read 512 bytes
CPU: 0 PID: 720 Comm: ubi_bgt1d Not tainted 4.6.0-xilinx-gff8137b-dirty #25
Hardware name: Xilinx Zynq Platform
[<c010e718>] (unwind_backtrace) from [<c010a8d0>] (show_stack+0x10/0x14)
[<c010a8d0>] (show_stack) from [<c02fcea4>] (dump_stack+0x84/0xa4)
[<c02fcea4>] (dump_stack) from [<c0405d64>] (ubi_io_read+0x1d4/0x2a8)
[<c0405d64>] (ubi_io_read) from [<c0406220>] (ubi_io_read_vid_hdr+0x6c/0x1d8)
[<c0406220>] (ubi_io_read_vid_hdr) from [<c0408280>] (wear_leveling_worker+0x1e0/0x6a0)
[<c0408280>] (wear_leveling_worker) from [<c0407770>] (do_work+0xcc/0x100)
[<c0407770>] (do_work) from [<c0408dc8>] (ubi_thread+0x100/0x190)
[<c0408dc8>] (ubi_thread) from [<c0132960>] (kthread+0xdc/0xf0)
[<c0132960>] (kthread) from [<c0106fb8>] (ret_from_fork+0x14/0x3c)
ubi1: scrubbed PEB 978 (LEB 0:920), data moved to PEB 999
ubi1 warning: ubi_io_read: error -74 (ECC error) while reading 512 bytes from PEB 122:512, read only 512 bytes, retry
ubi1 warning: ubi_io_read: error -74 (ECC error) while reading 512 bytes from PEB 122:512, read only 512 bytes, retry
ubi1 warning: ubi_io_read: error -74 (ECC error) while reading 512 bytes from PEB 122:512, read only 512 bytes, retry
UBIFS (ubi1:0): recovery completed
UBIFS (ubi1:0): UBIFS: mounted UBI device 1, volume 0, name "reserve1"
UBIFS (ubi1:0): LEB size: 129024 bytes (126 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
UBIFS (ubi1:0): FS size: 125024256 bytes (119 MiB, 969 LEBs), journal size 6322176 bytes (6 MiB, 49 LEBs)
UBIFS (ubi1:0): reserved for root: 4952683 bytes (4836 KiB)
UBIFS (ubi1:0): media format: w4/r0 (latest is w4/r0), UUID AA6011E9-D08C-458A-9461-19D89F72795C, small LPT model
ubi1 error: ubi_io_read: error -74 (ECC error) while reading 512 bytes from PEB 122:512, read 512 bytes
CPU: 0 PID: 720 Comm: ubi_bgt1d Not tainted 4.6.0-xilinx-gff8137b-dirty #25
Hardware name: Xilinx Zynq Platform
[<c010e718>] (unwind_backtrace) from [<c010a8d0>] (show_stack+0x10/0x14)
[<c010a8d0>] (show_stack) from [<c02fcea4>] (dump_stack+0x84/0xa4)
[<c02fcea4>] (dump_stack) from [<c0405d64>] (ubi_io_read+0x1d4/0x2a8)
[<c0405d64>] (ubi_io_read) from [<c0406220>] (ubi_io_read_vid_hdr+0x6c/0x1d8)
[<c0406220>] (ubi_io_read_vid_hdr) from [<c0408280>] (wear_leveling_worker+0x1e0/0x6a0)
[<c0408280>] (wear_leveling_worker) from [<c0407770>] (do_work+0xcc/0x100)
[<c0407770>] (do_work) from [<c0408dc8>] (ubi_thread+0x100/0x190)
[<c0408dc8>] (ubi_thread) from [<c0132960>] (kthread+0xdc/0xf0)
[<c0132960>] (kthread) from [<c0106fb8>] (ret_from_fork+0x14/0x3c)
ubi1: scrubbed PEB 122 (LEB 0:908), data moved to PEB 988
ubi1 warning: ubi_io_read: error -74 (ECC error) while reading 512 bytes from PEB 472:512, read only 512 bytes, retry
ubi1 warning: ubi_io_read: error -74 (ECC error) while reading 512 bytes from PEB 472:512, read only 512 bytes, retry
ubi1 warning: ubi_io_read: error -74 (ECC error) while reading 512 bytes from PEB 472:512, read only 512 bytes, retry
ubi1 error: ubi_io_read: error -74 (ECC error) while reading 512 bytes from PEB 472:512, read 512 bytes
CPU: 0 PID: 720 Comm: ubi_bgt1d Not tainted 4.6.0-xilinx-gff8137b-dirty #25
Hardware name: Xilinx Zynq Platform
[<c010e718>] (unwind_backtrace) from [<c010a8d0>] (show_stack+0x10/0x14)
[<c010a8d0>] (show_stack) from [<c02fcea4>] (dump_stack+0x84/0xa4)
[<c02fcea4>] (dump_stack) from [<c0405d64>] (ubi_io_read+0x1d4/0x2a8)
[<c0405d64>] (ubi_io_read) from [<c0406220>] (ubi_io_read_vid_hdr+0x6c/0x1d8)
[<c0406220>] (ubi_io_read_vid_hdr) from [<c0408280>] (wear_leveling_worker+0x1e0/0x6a0)
[<c0408280>] (wear_leveling_worker) from [<c0407770>] (do_work+0xcc/0x100)
[<c0407770>] (do_work) from [<c0408dc8>] (ubi_thread+0x100/0x190)
[<c0408dc8>] (ubi_thread) from [<c0132960>] (kthread+0xdc/0xf0)
[<c0132960>] (kthread) from [<c0106fb8>] (ret_from_fork+0x14/0x3c)
ubi1: scrubbed PEB 472 (LEB 0:906), data moved to PEB 980
ubi1 warning: ubi_io_read: error -74 (ECC error) while reading 512 bytes from PEB 816:512, read only 512 bytes, retry
ubi1 warning: ubi_io_read: error -74 (ECC error) while reading 512 bytes from PEB 816:512, read only 512 bytes, retry
ubi1 warning: ubi_io_read: error -74 (ECC error) while reading 512 bytes from PEB 816:512, read only 512 bytes, retry
ubi1 error: ubi_io_read: error -74 (ECC error) while reading 512 bytes from PEB 816:512, read 512 bytes
CPU: 0 PID: 720 Comm: ubi_bgt1d Not tainted 4.6.0-xilinx-gff8137b-dirty #25
Hardware name: Xilinx Zynq Platform
[<c010e718>] (unwind_backtrace) from [<c010a8d0>] (show_stack+0x10/0x14)
[<c010a8d0>] (show_stack) from [<c02fcea4>] (dump_stack+0x84/0xa4)
[<c02fcea4>] (dump_stack) from [<c0405d64>] (ubi_io_read+0x1d4/0x2a8)
[<c0405d64>] (ubi_io_read) from [<c0406220>] (ubi_io_read_vid_hdr+0x6c/0x1d8)
[<c0406220>] (ubi_io_read_vid_hdr) from [<c0408280>] (wear_leveling_worker+0x1e0/0x6a0)
[<c0408280>] (wear_leveling_worker) from [<c0407770>] (do_work+0xcc/0x100)
[<c0407770>] (do_work) from [<c0408dc8>] (ubi_thread+0x100/0x190)
[<c0408dc8>] (ubi_thread) from [<c0132960>] (kthread+0xdc/0xf0)
[<c0132960>] (kthread) from [<c0106fb8>] (ret_from_fork+0x14/0x3c)
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
ubi1: scrubbed PEB 816 (LEB 0:796), data moved to PEB 966
ubi1 warning: ubi_io_read: error -74 (ECC error) while reading 512 bytes from PEB 635:512, read only 512 bytes, retry
ubi1 warning: ubi_io_read: error -74 (ECC error) while reading 512 bytes from PEB 635:512, read only 512 bytes, retry
ubi1 warning: ubi_io_read: error -74 (ECC error) while reading 512 bytes from PEB 635:512, read only 512 bytes, retry
ubi1 error: ubi_io_read: error -74 (ECC error) while reading 512 bytes from PEB 635:512, read 512 bytes
CPU: 0 PID: 720 Comm: ubi_bgt1d Not tainted 4.6.0-xilinx-gff8137b-dirty #25
Hardware name: Xilinx Zynq Platform
[<c010e718>] (unwind_backtrace) from [<c010a8d0>] (show_stack+0x10/0x14)
[<c010a8d0>] (show_stack) from [<c02fcea4>] (dump_stack+0x84/0xa4)
[<c02fcea4>] (dump_stack) from [<c0405d64>] (ubi_io_read+0x1d4/0x2a8)
[<c0405d64>] (ubi_io_read) from [<c0406220>] (ubi_io_read_vid_hdr+0x6c/0x1d8)
[<c0406220>] (ubi_io_read_vid_hdr) from [<c0408280>] (wear_leveling_worker+0x1e0/0x6a0)
[<c0408280>] (wear_leveling_worker) from [<c0407770>] (do_work+0xcc/0x100)
[<c0407770>] (do_work) from [<c0408dc8>] (ubi_thread+0x100/0x190)
[<c0408dc8>] (ubi_thread) from [<c0132960>] (kthread+0xdc/0xf0)
[<c0132960>] (kthread) from [<c0106fb8>] (ret_from_fork+0x14/0x3c)
ubi1: scrubbed PEB 635 (LEB 0:956), data moved to PEB 864
ubi1 warning: ubi_io_read: error -74 (ECC error) while reading 512 bytes from PEB 392:512, read only 512 bytes, retry
ubi1 warning: ubi_io_read: error -74 (ECC error) while reading 512 bytes from PEB 392:512, read only 512 bytes, retry
ubi1 warning: ubi_io_read: error -74 (ECC error) while reading 512 bytes from PEB 392:512, read only 512 bytes, retry
ubi1 error: ubi_io_read: error -74 (ECC error) while reading 512 bytes from PEB 392:512, read 512 bytes
CPU: 0 PID: 720 Comm: ubi_bgt1d Not tainted 4.6.0-xilinx-gff8137b-dirty #25
Hardware name: Xilinx Zynq Platform
[<c010e718>] (unwind_backtrace) from [<c010a8d0>] (show_stack+0x10/0x14)
[<c010a8d0>] (show_stack) from [<c02fcea4>] (dump_stack+0x84/0xa4)
[<c02fcea4>] (dump_stack) from [<c0405d64>] (ubi_io_read+0x1d4/0x2a8)
[<c0405d64>] (ubi_io_read) from [<c0406220>] (ubi_io_read_vid_hdr+0x6c/0x1d8)
[<c0406220>] (ubi_io_read_vid_hdr) from [<c0408280>] (wear_leveling_worker+0x1e0/0x6a0)
[<c0408280>] (wear_leveling_worker) from [<c0407770>] (do_work+0xcc/0x100)
[<c0407770>] (do_work) from [<c0408dc8>] (ubi_thread+0x100/0x190)
[<c0408dc8>] (ubi_thread) from [<c0132960>] (kthread+0xdc/0xf0)
[<c0132960>] (kthread) from [<c0106fb8>] (ret_from_fork+0x14/0x3c)
ubi1: scrubbed PEB 392 (LEB 0:478), data moved to PEB 861
ubi1 warning: ubi_io_read: error -74 (ECC error) while reading 512 bytes from PEB 1000:512, read only 512 bytes, retry
ubi1 warning: ubi_io_read: error -74 (ECC error) while reading 512 bytes from PEB 1000:512, read only 512 bytes, retry
ubi1 warning: ubi_io_read: error -74 (ECC error) while reading 512 bytes from PEB 1000:512, read only 512 bytes, retry
ubi1 error: ubi_io_read: error -74 (ECC error) while reading 512 bytes from PEB 1000:512, read 512 bytes
CPU: 0 PID: 720 Comm: ubi_bgt1d Not tainted 4.6.0-xilinx-gff8137b-dirty #25
Hardware name: Xilinx Zynq Platform
[<c010e718>] (unwind_backtrace) from [<c010a8d0>] (show_stack+0x10/0x14)
[<c010a8d0>] (show_stack) from [<c02fcea4>] (dump_stack+0x84/0xa4)
[<c02fcea4>] (dump_stack) from [<c0405d64>] (ubi_io_read+0x1d4/0x2a8)
[<c0405d64>] (ubi_io_read) from [<c0406220>] (ubi_io_read_vid_hdr+0x6c/0x1d8)
[<c0406220>] (ubi_io_read_vid_hdr) from [<c0408280>] (wear_leveling_worker+0x1e0/0x6a0)
[<c0408280>] (wear_leveling_worker) from [<c0407770>] (do_work+0xcc/0x100)
[<c0407770>] (do_work) from [<c0408dc8>] (ubi_thread+0x100/0x190)
[<c0408dc8>] (ubi_thread) from [<c0132960>] (kthread+0xdc/0xf0)
[<c0132960>] (kthread) from [<c0106fb8>] (ret_from_fork+0x14/0x3c)
ubi1: scrubbed PEB 1000 (LEB 0:884), data moved to PEB 1014
ubi1 warning: ubi_io_read: error -74 (ECC error) while reading 512 bytes from PEB 465:512, read only 512 bytes, retry
ubi1 warning: ubi_io_read: error -74 (ECC error) while reading 512 bytes from PEB 465:512, read only 512 bytes, retry
ubi1 warning: ubi_io_read: error -74 (ECC error) while reading 512 bytes from PEB 465:512, read only 512 bytes, retry
ubi1 error: ubi_io_read: error -74 (ECC error) while reading 512 bytes from PEB 465:512, read 512 bytes
CPU: 0 PID: 720 Comm: ubi_bgt1d Not tainted 4.6.0-xilinx-gff8137b-dirty #25
Hardware name: Xilinx Zynq Platform
[<c010e718>] (unwind_backtrace) from [<c010a8d0>] (show_stack+0x10/0x14)
[<c010a8d0>] (show_stack) from [<c02fcea4>] (dump_stack+0x84/0xa4)
[<c02fcea4>] (dump_stack) from [<c0405d64>] (ubi_io_read+0x1d4/0x2a8)
[<c0405d64>] (ubi_io_read) from [<c0406220>] (ubi_io_read_vid_hdr+0x6c/0x1d8)
[<c0406220>] (ubi_io_read_vid_hdr) from [<c0408280>] (wear_leveling_worker+0x1e0/0x6a0)
[<c0408280>] (wear_leveling_worker) from [<c0407770>] (do_work+0xcc/0x100)
[<c0407770>] (do_work) from [<c0408dc8>] (ubi_thread+0x100/0x190)
[<c0408dc8>] (ubi_thread) from [<c0132960>] (kthread+0xdc/0xf0)
[<c0132960>] (kthread) from [<c0106fb8>] (ret_from_fork+0x14/0x3c)
ubi1: scrubbed PEB 465 (LEB 0:113), data moved to PEB 1012
ubi1 warning: ubi_io_read: error -74 (ECC error) while reading 512 bytes from PEB 665:512, read only 512 bytes, retry
ubi1 warning: ubi_io_read: error -74 (ECC error) while reading 512 bytes from PEB 665:512, read only 512 bytes, retry
macb e000b000.ethernet eth0: unable to generate target frequency: 25000000 Hz
macb e000b000.ethernet eth0: link up (100/Full)
IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
ubi1 warning: ubi_io_read: error -74 (ECC error) while reading 512 bytes from PEB 665:512, read only 512 bytes, retry
ubi1 error: ubi_io_read: error -74 (ECC error) while reading 512 bytes from PEB 665:512, read 512 bytes
CPU: 0 PID: 720 Comm: ubi_bgt1d Not tainted 4.6.0-xilinx-gff8137b-dirty #25
Hardware name: Xilinx Zynq Platform
[<c010e718>] (unwind_backtrace) from [<c010a8d0>] (show_stack+0x10/0x14)
[<c010a8d0>] (show_stack) from [<c02fcea4>] (dump_stack+0x84/0xa4)
[<c02fcea4>] (dump_stack) from [<c0405d64>] (ubi_io_read+0x1d4/0x2a8)
[<c0405d64>] (ubi_io_read) from [<c0406220>] (ubi_io_read_vid_hdr+0x6c/0x1d8)
[<c0406220>] (ubi_io_read_vid_hdr) from [<c0408280>] (wear_leveling_worker+0x1e0/0x6a0)
[<c0408280>] (wear_leveling_worker) from [<c0407770>] (do_work+0xcc/0x100)
[<c0407770>] (do_work) from [<c0408dc8>] (ubi_thread+0x100/0x190)
[<c0408dc8>] (ubi_thread) from [<c0132960>] (kthread+0xdc/0xf0)
[<c0132960>] (kthread) from [<c0106fb8>] (ret_from_fork+0x14/0x3c)
ubi1: scrubbed PEB 665 (LEB 0:883), data moved to PEB 81
In axi fpga driver!
request_mem_region OK!
AXI fpga dev virtual address is 0xcfb5c000
*base_vir_addr = 0xb023
In fpga mem driver!
request_mem_region OK!
fpga mem virtual address is 0xd2000000
random: nonblocking pool is initialized
2022-05-01 14:54:15:thread.c:1555:create_bitmain_soc_init_thread: create thread
2022-05-01 14:54:15:driver-btm-api.c:682:init_freq_mode: This is scan-user version
2022-05-01 14:54:15:driver-btm-api.c:2518:bitmain_soc_init: Miner compile time: Fri Jan 8 22:35:06 CST 2021 type: Antminer T17e
2022-05-01 14:54:15:driver-btm-api.c:2519:bitmain_soc_init: commit version: 37668c9 2021-01-08 18:20:11, build by: jenkins 2021-01-08 22:39:58
2022-05-01 14:54:15:driver-btm-api.c:2520:bitmain_soc_init: opt_multi_version = 1
2022-05-01 14:54:15:driver-btm-api.c:2521:bitmain_soc_init: opt_bitmain_ab = 1
2022-05-01 14:54:15:driver-btm-api.c:2522:bitmain_soc_init: mid_auto_gen = 0
2022-05-01 14:54:15:driver-btm-api.c:2523:bitmain_soc_init: work_mode = 0
2022-05-01 14:54:15:driver-btm-api.c:2524:bitmain_soc_init: power_feedback_en = true
2022-05-01 14:54:15:driver-btm-api.c:2067:show_sn: no SN got, please write SN to /config/sn
2022-05-01 14:54:15:driver-btm-api.c:1384:miner_device_init: Detect 256MB control board of XILINX
2022-05-01 14:54:15:driver-btm-api.c:1325:init_fan_parameter: fan_eft : 0 fan_pwm : 0
2022-05-01 14:54:21:driver-btm-api.c:1309:init_miner_version: miner ID : 8020942a18c0885c
2022-05-01 14:54:21:driver-btm-api.c:1315:init_miner_version: FPGA Version = 0xB023
2022-05-01 14:54:26:auto_adapt.c:100:_get_board_info: chain[0] board bin: 1, chip bin: 3, chip ft: A4V2, chip version: AB
2022-05-01 14:54:26:auto_adapt.c:100:_get_board_info: chain[1] board bin: 1, chip bin: 3, chip ft: A4V2, chip version: AB
2022-05-01 14:54:26:auto_adapt.c:100:_get_board_info: chain[2] board bin: 1, chip bin: 3, chip ft: A4V2, chip version: AB
2022-05-01 14:54:26:auto_adapt.c:273:is_sweep_failed_before: open sweep tag failed
voltage_ref = 1850
2100 2100 2100 2100 2100 2100
2100 2100 2100 2100 2100 2100
2100 2100 2100 2100 2100 2100
2100 2100 2100 2100 2100 2070
2100 2100 2100 2100 2070 2030
2080 2070 2060 2060 2030 1990
2030 2020 2020 2010 1990 1940
2000 1990 1980 1970 1930 1880
2000 1990 1980 1970 1930 1880
2022-05-01 14:54:26:thread.c:1523:create_read_nonce_reg_thread: create thread
2022-05-01 14:54:26:driver-btm-api.c:698:dump_pcb_bom_version: Chain [0] PCB Version: 0x010a
2022-05-01 14:54:26:driver-btm-api.c:699:dump_pcb_bom_version: Chain [0] BOM Version: 0x0100
2022-05-01 14:54:26:driver-btm-api.c:698:dump_pcb_bom_version: Chain [1] PCB Version: 0x010a
2022-05-01 14:54:26:driver-btm-api.c:699:dump_pcb_bom_version: Chain [1] BOM Version: 0x0100
2022-05-01 14:54:26:driver-btm-api.c:698:dump_pcb_bom_version: Chain [2] PCB Version: 0x010a
2022-05-01 14:54:26:driver-btm-api.c:699:dump_pcb_bom_version: Chain [2] BOM Version: 0x0100
2022-05-01 14:54:33:driver-btm-api.c:2344:bitmain_board_init: Fan check passed.
2022-05-01 14:54:34:board.c:81:jump_and_app_check_restore_pic: chain[0] PIC jump to app
2022-05-01 14:54:36:board.c:94:jump_and_app_check_restore_pic: Check chain[0] PIC fw version=0x88
2022-05-01 14:54:37:board.c:81:jump_and_app_check_restore_pic: chain[1] PIC jump to app
2022-05-01 14:54:39:board.c:94:jump_and_app_check_restore_pic: Check chain[1] PIC fw version=0x88
2022-05-01 14:54:40:board.c:81:jump_and_app_check_restore_pic: chain[2] PIC jump to app
2022-05-01 14:54:42:board.c:94:jump_and_app_check_restore_pic: Check chain[2] PIC fw version=0x88
2022-05-01 14:54:42:thread.c:1518:create_pic_heart_beat_thread: create thread
2022-05-01 14:54:44:power_api.c:241:power_init: power type version: 0x0042
2022-05-01 14:54:45:power_api.c:259:power_init: Power init:
2022-05-01 14:54:45:power_api.c:260:power_init: current_voltage_raw = 2136
2022-05-01 14:54:45:power_api.c:261:power_init: highest_voltage_raw = 2000
2022-05-01 14:54:45:power_api.c:262:power_init: working_voltage_raw = 1800
2022-05-01 14:54:45:power_api.c:263:power_init: higher_voltage_raw = 1850
2022-05-01 14:54:45:power_api.c:264:power_init: check_asic_voltage_raw = 1800
2022-05-01 14:54:45:driver-btm-api.c:2354:bitmain_board_init: Enter 60s sleep to make sure power release finish.
2022-05-01 14:55:47:driver-btm-api.c:1123:check_asic_number_until_volt_balance: THIS is No.1 time boost asic:
2022-05-01 14:55:47:power_api.c:334:modify_check_asic_voltage: check_asic_voltage_raw = 1800
2022-05-01 14:55:50:power_api.c:298:set_to_check_asic_voltage_by_steps: Set to voltage raw 1800, step by step.
2022-05-01 14:56:11:uart.c:69:set_baud: set UART baud to 115200
chain 0, IO_DRIVE_STRENGTH_CONFIGURATION reg = 0x 7777777
2022-05-01 14:56:16:driver-btm-api.c:1035:check_asic_number_with_power_on: Chain[0]: find 0 asic, times 0
2022-05-01 14:56:17:board.c:81:jump_and_app_check_restore_pic: chain[0] PIC jump to app
2022-05-01 14:56:19:board.c:94:jump_and_app_check_restore_pic: Check chain[0] PIC fw version=0x88
2022-05-01 14:56:19:power_api.c:334:modify_check_asic_voltage: check_asic_voltage_raw = 1900
2022-05-01 14:56:19:power_api.c:298:set_to_check_asic_voltage_by_steps: Set to voltage raw 1900, step by step.
chain 0, IO_DRIVE_STRENGTH_CONFIGURATION reg = 0x 7777777
2022-05-01 14:56:36:driver-btm-api.c:1035:check_asic_number_with_power_on: Chain[0]: find 66 asic, times 1
2022-05-01 14:56:37:board.c:81:jump_and_app_check_restore_pic: chain[0] PIC jump to app
2022-05-01 14:56:39:board.c:94:jump_and_app_check_restore_pic: Check chain[0] PIC fw version=0x88
2022-05-01 14:56:39:power_api.c:334:modify_check_asic_voltage: check_asic_voltage_raw = 2000
2022-05-01 14:56:39:power_api.c:298:set_to_check_asic_voltage_by_steps: Set to voltage raw 2000, step by step.
chain 0, IO_DRIVE_STRENGTH_CONFIGURATION reg = 0x 7777777
2022-05-01 14:56:56:driver-btm-api.c:1035:check_asic_number_with_power_on: Chain[0]: find 78 asic, times 2
chain 1, IO_DRIVE_STRENGTH_CONFIGURATION reg = 0x 7777777
2022-05-01 14:57:00:driver-btm-api.c:1035:check_asic_number_with_power_on: Chain[1]: find 0 asic, times 0
2022-05-01 14:57:01:board.c:81:jump_and_app_check_restore_pic: chain[1] PIC jump to app
2022-05-01 14:57:03:board.c:94:jump_and_app_check_restore_pic: Check chain[1] PIC fw version=0x88
2022-05-01 14:57:03:power_api.c:334:modify_check_asic_voltage: check_asic_voltage_raw = 2100
2022-05-01 14:57:03:power_api.c:298:set_to_check_asic_voltage_by_steps: Set to voltage raw 2100, step by step.
chain 1, IO_DRIVE_STRENGTH_CONFIGURATION reg = 0x 7777777
2022-05-01 14:57:21:driver-btm-api.c:1035:check_asic_number_with_power_on: Chain[1]: find 0 asic, times 1
2022-05-01 14:57:22:board.c:81:jump_and_app_check_restore_pic: chain[1] PIC jump to app
2022-05-01 14:57:24:board.c:94:jump_and_app_check_restore_pic: Check chain[1] PIC fw version=0x88
2022-05-01 14:57:24:power_api.c:334:modify_check_asic_voltage: check_asic_voltage_raw = 1800
2022-05-01 14:57:24:power_api.c:298:set_to_check_asic_voltage_by_steps: Set to voltage raw 1800, step by step.
chain 1, IO_DRIVE_STRENGTH_CONFIGURATION reg = 0x 7777777
2022-05-01 14:57:47:driver-btm-api.c:1035:check_asic_number_with_power_on: Chain[1]: find 0 asic, times 2
2022-05-01 14:57:49:board.c:81:jump_and_app_check_restore_pic: chain[1] PIC jump to app
2022-05-01 14:57:51:board.c:94:jump_and_app_check_restore_pic: Check chain[1] PIC fw version=0x88
2022-05-01 14:57:51:power_api.c:334:modify_check_asic_voltage: check_asic_voltage_raw = 1900
2022-05-01 14:57:51:power_api.c:298:set_to_check_asic_voltage_by_steps: Set to voltage raw 1900, step by step.
chain 1, IO_DRIVE_STRENGTH_CONFIGURATION reg = 0x 7777777
2022-05-01 14:58:08:driver-btm-api.c:1035:check_asic_number_with_power_on: Chain[1]: find 0 asic, times 3
2022-05-01 14:58:09:board.c:81:jump_and_app_check_restore_pic: chain[1] PIC jump to app
2022-05-01 14:58:11:board.c:94:jump_and_app_check_restore_pic: Check chain[1] PIC fw version=0x88
2022-05-01 14:58:11:power_api.c:334:modify_check_asic_voltage: check_asic_voltage_raw = 2000
2022-05-01 14:58:11:power_api.c:298:set_to_check_asic_voltage_by_steps: Set to voltage raw 2000, step by step.
2022-05-01 14:58:23:driver-btm-api.c:1217:check_asic_number: Chain 1 only find 0 asic, will power off hash board 1
chain 2, IO_DRIVE_STRENGTH_CONFIGURATION reg = 0x 7777777
2022-05-01 14:58:28:driver-btm-api.c:1035:check_asic_number_with_power_on: Chain[2]: find 0 asic, times 0
2022-05-01 14:58:29:board.c:81:jump_and_app_check_restore_pic: chain[2] PIC jump to app
2022-05-01 14:58:31:board.c:94:jump_and_app_check_restore_pic: Check chain[2] PIC fw version=0x88
2022-05-01 14:58:31:power_api.c:334:modify_check_asic_voltage: check_asic_voltage_raw = 2100
2022-05-01 14:58:31:power_api.c:298:set_to_check_asic_voltage_by_steps: Set to voltage raw 2100, step by step.
chain 2, IO_DRIVE_STRENGTH_CONFIGURATION reg = 0x 7777777
2022-05-01 14:58:46:driver-btm-api.c:1035:check_asic_number_with_power_on: Chain[2]: find 0 asic, times 1
2022-05-01 14:58:47:board.c:81:jump_and_app_check_restore_pic: chain[2] PIC jump to app
2022-05-01 14:58:49:board.c:94:jump_and_app_check_restore_pic: Check chain[2] PIC fw version=0x88
2022-05-01 14:58:49:power_api.c:334:modify_check_asic_voltage: check_asic_voltage_raw = 1800
2022-05-01 14:58:49:power_api.c:298:set_to_check_asic_voltage_by_steps: Set to voltage raw 1800, step by step.
chain 2, IO_DRIVE_STRENGTH_CONFIGURATION reg = 0x 7777777
2022-05-01 14:59:10:driver-btm-api.c:1035:check_asic_number_with_power_on: Chain[2]: find 0 asic, times 2
2022-05-01 14:59:11:board.c:81:jump_and_app_check_restore_pic: chain[2] PIC jump to app
2022-05-01 14:59:13:board.c:94:jump_and_app_check_restore_pic: Check chain[2] PIC fw version=0x88
2022-05-01 14:59:13:power_api.c:334:modify_check_asic_voltage: check_asic_voltage_raw = 1900
2022-05-01 14:59:13:power_api.c:298:set_to_check_asic_voltage_by_steps: Set to voltage raw 1900, step by step.
chain 2, IO_DRIVE_STRENGTH_CONFIGURATION reg = 0x 7777777
2022-05-01 14:59:28:driver-btm-api.c:1035:check_asic_number_with_power_on: Chain[2]: find 0 asic, times 3
2022-05-01 14:59:29:board.c:81:jump_and_app_check_restore_pic: chain[2] PIC jump to app
2022-05-01 14:59:31:board.c:94:jump_and_app_check_restore_pic: Check chain[2] PIC fw version=0x88
2022-05-01 14:59:31:power_api.c:334:modify_check_asic_voltage: check_asic_voltage_raw = 2000
2022-05-01 14:59:31:power_api.c:298:set_to_check_asic_voltage_by_steps: Set to voltage raw 2000, step by step.
2022-05-01 14:59:42:driver-btm-api.c:1217:check_asic_number: Chain 2 only find 0 asic, will power off hash board 2
2022-05-01 14:59:43:driver-btm-api.c:1163:check_asic_number_until_volt_balance: PASS: volt balance at No.1 time boost asic.
2022-05-01 14:59:43:power_api.c:364:set_to_highest_voltage_by_steps: Set to voltage raw 2000, step by step.
2022-05-01 14:59:51:driver-hash-chip.c:876:set_uart_relay: set uart relay to 0x330003
2022-05-01 14:59:51:driver-hash-chip.c:1264:set_ldo_ctrl: Set LDO to 0x2000203
2022-05-01 14:59:52:driver-hash-chip.c:737:dump_adc_voltage_v2: get ADC_DATAOUT from chain 0 with 0 regs timeout.
chain 0 domain 0: d0 0.372, d1 0.368, d2 0.367, d3 0.382, sum = 1.488953
chain 0 domain 1: d0 0.354, d1 0.356, d2 0.370, d3 0.365, sum = 1.444946
chain 0 domain 2: d0 0.346, d1 0.352, d2 0.342, d3 0.357, sum = 1.397888
chain 0 domain 3: d0 0.378, d1 0.378, d2 0.366, d3 0.373, sum = 1.494812
chain 0 domain 4: d0 0.393, d1 0.398, d2 0.406, d3 0.399, sum = 1.595520
chain 0 domain 5: d0 0.415, d1 0.419, d2 0.419, d3 0.418, sum = 1.670654
chain 0 domain 6: d0 0.435, d1 0.426, d2 0.421, d3 0.428, sum = 1.710999
chain 0 domain 7: d0 0.425, d1 0.427, d2 0.421, d3 0.424, sum = 1.696960
chain 0 domain 8: d0 0.428, d1 0.424, d2 0.409, d3 0.420, sum = 1.681030
chain 0 domain 9: d0 0.365, d1 0.366, d2 0.350, d3 0.377, sum = 1.457336
chain 0 domain 10: d0 0.333, d1 0.336, d2 0.332, d3 0.343, sum = 1.344482
chain 0 domain 11: d0 0.365, d1 0.366, d2 0.367, d3 0.379, sum = 1.478149
chain 0 domain 12: d0 0.343, d1 0.352, d2 0.354, d3 0.352, sum = 1.400635
2022-05-01 14:59:52:driver-hash-chip.c:493:check_adc_voltage: PASS domainn volt check: request 0.800 (index 0, open_core)
2022-05-01 14:59:53:temperature.c:272:calibrate_temp_sensor_one_chain: chain 0 temp sensor TMP451
2022-05-01 14:59:59:driver-btm-api.c:311:check_bringup_temp: Bring up temperature is 32
2022-05-01 14:59:59:uart.c:69:set_baud: set UART baud to 3000000
2022-05-01 14:59:59 voltage[0] = 1850
2022-05-01 14:59:59:power_api.c:272:set_working_voltage_raw: working_voltage_raw = 1850
2022-05-01 14:59:59:thread.c:1538:create_check_miner_status_thread: create thread
2022-05-01 14:59:59:thread.c:1528:create_show_miner_status_thread: create thread
2022-05-01 14:59:59:thread.c:1503:create_temperature_monitor_thread: create thread
2022-05-01 14:59:59:thread.c:1580:create_fan_monitor_thread: create thread
2022-05-01 14:59:59:frequency.c:578:inc_freq_with_fixed_vco: chain = 255, freq = 590, is_higher_voltage = true
2022-05-01 15:00:05:frequency.c:623:inc_freq_with_fixed_vco: get pcb 33 ~ 35, chip_temp 37 ~ 41, now 6.0s, target 41.0
2022-05-01 15:00:06:frequency.c:623:inc_freq_with_fixed_vco: get pcb 33 ~ 35, chip_temp 37 ~ 41, now 7.0s, target 41.2
2022-05-01 15:00:07:frequency.c:623:inc_freq_with_fixed_vco: get pcb 33 ~ 35, chip_temp 37 ~ 41, now 8.0s, target 41.3
2022-05-01 15:00:08:frequency.c:623:inc_freq_with_fixed_vco: get pcb 33 ~ 35, chip_temp 37 ~ 41, now 9.0s, target 41.5
2022-05-01 15:00:09:frequency.c:623:inc_freq_with_fixed_vco: get pcb 33 ~ 35, chip_temp 37 ~ 42, now 10.0s, target 41.7
2022-05-01 15:00:09:frequency.c:644:inc_freq_with_fixed_vco: heat speed too fast! current_temp 42 > 41.7 target_temp.
2022-05-01 15:00:15:frequency.c:623:inc_freq_with_fixed_vco: get pcb 34 ~ 35, chip_temp 38 ~ 43, now 16.0s, target 42.7
2022-05-01 15:00:15:frequency.c:644:inc_freq_with_fixed_vco: heat speed too fast! current_temp 43 > 42.7 target_temp.
2022-05-01 15:00:21:frequency.c:623:inc_freq_with_fixed_vco: get pcb 34 ~ 36, chip_temp 39 ~ 45, now 22.0s, target 43.7
2022-05-01 15:00:21:frequency.c:644:inc_freq_with_fixed_vco: heat speed too fast! current_temp 45 > 43.7 target_temp.
2022-05-01 15:00:27:frequency.c:623:inc_freq_with_fixed_vco: get pcb 35 ~ 37, chip_temp 39 ~ 46, now 28.0s, target 44.7
2022-05-01 15:00:27:frequency.c:644:inc_freq_with_fixed_vco: heat speed too fast! current_temp 46 > 44.7 target_temp.
2022-05-01 15:00:33:frequency.c:623:inc_freq_with_fixed_vco: get pcb 36 ~ 37, chip_temp 40 ~ 48, now 34.0s, target 45.7
2022-05-01 15:00:33:frequency.c:644:inc_freq_with_fixed_vco: heat speed too fast! current_temp 48 > 45.7 target_temp.
2022-05-01 15:00:39:frequency.c:623:inc_freq_with_fixed_vco: get pcb 37 ~ 38, chip_temp 41 ~ 49, now 40.0s, target 46.7
2022-05-01 15:00:39:frequency.c:644:inc_freq_with_fixed_vco: heat speed too fast! current_temp 49 > 46.7 target_temp.
2022-05-01 15:00:45:frequency.c:623:inc_freq_with_fixed_vco: get pcb 38 ~ 39, chip_temp 42 ~ 50, now 46.0s, target 47.7
2022-05-01 15:00:45:frequency.c:644:inc_freq_with_fixed_vco: heat speed too fast! current_temp 50 > 47.7 target_temp.
2022-05-01 15:00:51:frequency.c:623:inc_freq_with_fixed_vco: get pcb 38 ~ 39, chip_temp 42 ~ 51, now 52.0s, target 48.7
2022-05-01 15:00:51:frequency.c:644:inc_freq_with_fixed_vco: heat speed too fast! current_temp 51 > 48.7 target_temp.
2022-05-01 15:00:57:frequency.c:623:inc_freq_with_fixed_vco: get pcb 39 ~ 40, chip_temp 43 ~ 52, now 58.0s, target 49.7
2022-05-01 15:00:57:frequency.c:644:inc_freq_with_fixed_vco: heat speed too fast! current_temp 52 > 49.7 target_temp.
2022-05-01 15:01:03:frequency.c:623:inc_freq_with_fixed_vco: get pcb 40 ~ 41, chip_temp 44 ~ 53, now 64.0s, target 50.7
2022-05-01 15:01:03:frequency.c:644:inc_freq_with_fixed_vco: heat speed too fast! current_temp 53 > 50.7 target_temp.
2022-05-01 15:01:09:frequency.c:623:inc_freq_with_fixed_vco: get pcb 40 ~ 41, chip_temp 44 ~ 54, now 70.0s, target 51.7
2022-05-01 15:01:09:frequency.c:644:inc_freq_with_fixed_vco: heat speed too fast! current_temp 54 > 51.7 target_temp.
2022-05-01 15:01:15:frequency.c:623:inc_freq_with_fixed_vco: get pcb 41 ~ 42, chip_temp 45 ~ 55, now 76.0s, target 52.7
2022-05-01 15:01:15:frequency.c:644:inc_freq_with_fixed_vco: heat speed too fast! current_temp 55 > 52.7 target_temp.
2022-05-01 15:01:21:frequency.c:623:inc_freq_with_fixed_vco: get pcb 42 ~ 43, chip_temp 46 ~ 56, now 82.0s, target 53.7
2022-05-01 15:01:21:frequency.c:644:inc_freq_with_fixed_vco: heat speed too fast! current_temp 56 > 53.7 target_temp.
2022-05-01 15:01:27:frequency.c:623:inc_freq_with_fixed_vco: get pcb 42 ~ 43, chip_temp 46 ~ 56, now 88.0s, target 54.7
2022-05-01 15:01:27:frequency.c:644:inc_freq_with_fixed_vco: heat speed too fast! current_temp 56 > 54.7 target_temp.
2022-05-01 15:01:33:frequency.c:623:inc_freq_with_fixed_vco: get pcb 42 ~ 44, chip_temp 47 ~ 57, now 94.0s, target 55.7
2022-05-01 15:01:33:frequency.c:644:inc_freq_with_fixed_vco: heat speed too fast! current_temp 57 > 55.7 target_temp.
2022-05-01 15:01:39:frequency.c:623:inc_freq_with_fixed_vco: get pcb 43 ~ 45, chip_temp 48 ~ 57, now 100.0s, target 56.7
2022-05-01 15:01:39:frequency.c:644:inc_freq_with_fixed_vco: heat speed too fast! current_temp 57 > 56.7 target_temp.
2022-05-01 15:01:45:frequency.c:623:inc_freq_with_fixed_vco: get pcb 43 ~ 46, chip_temp 49 ~ 58, now 106.0s, target 57.7
2022-05-01 15:01:45:frequency.c:644:inc_freq_with_fixed_vco: heat speed too fast! current_temp 58 > 57.7 target_temp.
2022-05-01 15:01:51:frequency.c:623:inc_freq_with_fixed_vco: get pcb 44 ~ 46, chip_temp 49 ~ 59, now 112.0s, target 58.7
2022-05-01 15:01:51:frequency.c:644:inc_freq_with_fixed_vco: heat speed too fast! current_temp 59 > 58.7 target_temp.
2022-05-01 15:01:57:frequency.c:623:inc_freq_with_fixed_vco: get pcb 44 ~ 47, chip_temp 50 ~ 59, now 118.0s, target 59.7
2022-05-01 15:01:58:frequency.c:623:inc_freq_with_fixed_vco: get pcb 44 ~ 47, chip_temp 50 ~ 59, now 119.0s, target 59.8
2022-05-01 15:01:59:frequency.c:623:inc_freq_with_fixed_vco: get pcb 44 ~ 47, chip_temp 50 ~ 59, now 120.0s, target 60.0
2022-05-01 15:02:00:frequency.c:623:inc_freq_with_fixed_vco: get pcb 44 ~ 47, chip_temp 50 ~ 59, now 121.0s, target 60.2
2022-05-01 15:02:01:frequency.c:623:inc_freq_with_fixed_vco: get pcb 44 ~ 47, chip_temp 50 ~ 59, now 122.1s, target 60.3
2022-05-01 15:02:02:frequency.c:623:inc_freq_with_fixed_vco: get pcb 44 ~ 47, chip_temp 51 ~ 59, now 123.1s, target 60.5
2022-05-01 15:02:03:frequency.c:623:inc_freq_with_fixed_vco: get pcb 44 ~ 47, chip_temp 50 ~ 60, now 124.1s, target 60.7
2022-05-01 15:02:04:frequency.c:623:inc_freq_with_fixed_vco: get pcb 44 ~ 47, chip_temp 51 ~ 60, now 125.1s, target 60.8
2022-05-01 15:02:05:frequency.c:623:inc_freq_with_fixed_vco: get pcb 44 ~ 48, chip_temp 51 ~ 60, now 126.1s, target 61.0
2022-05-01 15:02:06:frequency.c:623:inc_freq_with_fixed_vco: get pcb 44 ~ 48, chip_temp 51 ~ 60, now 127.1s, target 61.2
2022-05-01 15:02:07:frequency.c:623:inc_freq_with_fixed_vco: get pcb 44 ~ 48, chip_temp 51 ~ 60, now 128.1s, target 61.3
2022-05-01 15:02:08:frequency.c:623:inc_freq_with_fixed_vco: get pcb 45 ~ 48, chip_temp 51 ~ 60, now 129.1s, target 61.5
2022-05-01 15:02:09:frequency.c:623:inc_freq_with_fixed_vco: get pcb 45 ~ 48, chip_temp 51 ~ 60, now 130.1s, target 61.7
2022-05-01 15:02:10:frequency.c:623:inc_freq_with_fixed_vco: get pcb 45 ~ 48, chip_temp 51 ~ 60, now 131.1s, target 61.8
2022-05-01 15:02:11:frequency.c:623:inc_freq_with_fixed_vco: get pcb 45 ~ 48, chip_temp 51 ~ 60, now 132.1s, target 62.0
2022-05-01 15:02:11:frequency.c:657:inc_freq_with_fixed_vco: [0] _POSTDIV1 = 7, _POSTDIV2 = 7, USER_DIV = 1, freq = 60
2022-05-01 15:02:11:frequency.c:665:inc_freq_with_fixed_vco: set to 60M, get pcb 45 ~ 48, chip_temp 51 ~ 60
2022-05-01 15:02:11:power_api.c:376:set_to_voltage_by_steps: Set to voltage raw 2100, step by step.
2022-05-01 15:02:19:frequency.c:671:inc_freq_with_fixed_vco: freq_mode 1=1 FREQ_MODE_USER, Conf.Check_Clock_Cnt=0
2022-05-01 15:02:19:driver-btm-api.c:1941:check_clock_counter_domain_last_core: freq 60 clock_counter_limit 6, no check, skip.
2022-05-01 15:02:27:frequency.c:623:inc_freq_with_fixed_vco: get pcb 45 ~ 50, chip_temp 53 ~ 62, now 148.4s, target 64.7
2022-05-01 15:02:27:frequency.c:657:inc_freq_with_fixed_vco: [1] _POSTDIV1 = 7, _POSTDIV2 = 6, USER_DIV = 1, freq = 70
2022-05-01 15:02:27:frequency.c:665:inc_freq_with_fixed_vco: set to 70M, get pcb 45 ~ 50, chip_temp 53 ~ 62
2022-05-01 15:02:27:frequency.c:671:inc_freq_with_fixed_vco: freq_mode 1=1 FREQ_MODE_USER, Conf.Check_Clock_Cnt=0
2022-05-01 15:02:27:driver-btm-api.c:1941:check_clock_counter_domain_last_core: freq 70 clock_counter_limit 8, no check, skip.
2022-05-01 15:02:35:frequency.c:623:inc_freq_with_fixed_vco: get pcb 46 ~ 50, chip_temp 55 ~ 64, now 156.4s, target 66.1
2022-05-01 15:02:35:frequency.c:657:inc_freq_with_fixed_vco: [2] _POSTDIV1 = 6, _POSTDIV2 = 6, USER_DIV = 1, freq = 81
2022-05-01 15:02:35:frequency.c:665:inc_freq_with_fixed_vco: set to 81M, get pcb 46 ~ 50, chip_temp 55 ~ 64
2022-05-01 15:02:35:frequency.c:671:inc_freq_with_fixed_vco: freq_mode 1=1 FREQ_MODE_USER, Conf.Check_Clock_Cnt=0
2022-05-01 15:02:35:driver-btm-api.c:1941:check_clock_counter_domain_last_core: freq 81 clock_counter_limit 9, no check, skip.
2022-05-01 15:02:43:frequency.c:623:inc_freq_with_fixed_vco: get pcb 46 ~ 51, chip_temp 56 ~ 64, now 164.4s, target 67.4
2022-05-01 15:02:43:frequency.c:657:inc_freq_with_fixed_vco: [3] _POSTDIV1 = 7, _POSTDIV2 = 5, USER_DIV = 1, freq = 84
2022-05-01 15:02:43:frequency.c:665:inc_freq_with_fixed_vco: set to 84M, get pcb 46 ~ 51, chip_temp 56 ~ 64
2022-05-01 15:02:43:frequency.c:671:inc_freq_with_fixed_vco: freq_mode 1=1 FREQ_MODE_USER, Conf.Check_Clock_Cnt=0
2022-05-01 15:02:43:driver-btm-api.c:1941:check_clock_counter_domain_last_core: freq 84 clock_counter_limit 10, no check, skip.
2022-05-01 15:02:51:frequency.c:623:inc_freq_with_fixed_vco: get pcb 46 ~ 52, chip_temp 56 ~ 64, now 172.4s, target 68.7
2022-05-01 15:02:51:frequency.c:657:inc_freq_with_fixed_vco: [4] _POSTDIV1 = 6, _POSTDIV2 = 5, USER_DIV = 1, freq = 98
2022-05-01 15:02:51:frequency.c:665:inc_freq_with_fixed_vco: set to 98M, get pcb 46 ~ 52, chip_temp 56 ~ 64
2022-05-01 15:02:51:frequency.c:671:inc_freq_with_fixed_vco: freq_mode 1=1 FREQ_MODE_USER, Conf.Check_Clock_Cnt=0
2022-05-01 15:02:51:driver-btm-api.c:1941:check_clock_counter_domain_last_core: freq 98 clock_counter_limit 12, no check, skip.
2022-05-01 15:02:59:frequency.c:623:inc_freq_with_fixed_vco: get pcb 46 ~ 52, chip_temp 57 ~ 65, now 180.4s, target 70.1
2022-05-01 15:02:59:frequency.c:657:inc_freq_with_fixed_vco: [5] _POSTDIV1 = 7, _POSTDIV2 = 4, USER_DIV = 1, freq = 105
2022-05-01 15:02:59:frequency.c:665:inc_freq_with_fixed_vco: set to 105M, get pcb 46 ~ 52, chip_temp 57 ~ 65
2022-05-01 15:02:59:frequency.c:671:inc_freq_with_fixed_vco: freq_mode 1=1 FREQ_MODE_USER, Conf.Check_Clock_Cnt=0
2022-05-01 15:02:59:driver-btm-api.c:1941:check_clock_counter_domain_last_core: freq 105 clock_counter_limit 13, no check, skip.
2022-05-01 15:03:07:frequency.c:623:inc_freq_with_fixed_vco: get pcb 46 ~ 53, chip_temp 58 ~ 65, now 188.4s, target 68.4
2022-05-01 15:03:07:frequency.c:657:inc_freq_with_fixed_vco: [6] _POSTDIV1 = 5, _POSTDIV2 = 5, USER_DIV = 1, freq = 118
2022-05-01 15:03:07:frequency.c:665:inc_freq_with_fixed_vco: set to 118M, get pcb 46 ~ 53, chip_temp 58 ~ 65
2022-05-01 15:03:07:frequency.c:671:inc_freq_with_fixed_vco: freq_mode 1=1 FREQ_MODE_USER, Conf.Check_Clock_Cnt=0
2022-05-01 15:03:07:driver-btm-api.c:1941:check_clock_counter_domain_last_core: freq 118 clock_counter_limit 15, no check, skip.
2022-05-01 15:03:15:frequency.c:623:inc_freq_with_fixed_vco: get pcb 46 ~ 53, chip_temp 59 ~ 65, now 196.5s, target 69.7
2022-05-01 15:03:15:frequency.c:657:inc_freq_with_fixed_vco: [7] _POSTDIV1 = 6, _POSTDIV2 = 4, USER_DIV = 1, freq = 122
2022-05-01 15:03:15:frequency.c:665:inc_freq_with_fixed_vco: set to 122M, get pcb 46 ~ 53, chip_temp 59 ~ 65
2022-05-01 15:03:15:frequency.c:671:inc_freq_with_fixed_vco: freq_mode 1=1 FREQ_MODE_USER, Conf.Check_Clock_Cnt=0
2022-05-01 15:03:15:driver-btm-api.c:1941:check_clock_counter_domain_last_core: freq 122 clock_counter_limit 16, no check, skip.
2022-05-01 15:03:23:frequency.c:623:inc_freq_with_fixed_vco: get pcb 46 ~ 53, chip_temp 59 ~ 66, now 204.5s, target 71.1
2022-05-01 15:03:23:frequency.c:657:inc_freq_with_fixed_vco: [8] _POSTDIV1 = 7, _POSTDIV2 = 3, USER_DIV = 1, freq = 140
2022-05-01 15:03:23:frequency.c:665:inc_freq_with_fixed_vco: set to 140M, get pcb 46 ~ 53, chip_temp 59 ~ 66
2022-05-01 15:03:23:frequency.c:671:inc_freq_with_fixed_vco: freq_mode 1=1 FREQ_MODE_USER, Conf.Check_Clock_Cnt=0
2022-05-01 15:03:23:driver-btm-api.c:1941:check_clock_counter_domain_last_core: freq 140 clock_counter_limit 19, no check, skip.
2022-05-01 15:03:31:frequency.c:623:inc_freq_with_fixed_vco: get pcb 46 ~ 54, chip_temp 60 ~ 66, now 212.5s, target 69.4
2022-05-01 15:03:31:frequency.c:657:inc_freq_with_fixed_vco: [9] _POSTDIV1 = 5, _POSTDIV2 = 4, USER_DIV = 1, freq = 147
2022-05-01 15:03:31:frequency.c:665:inc_freq_with_fixed_vco: set to 147M, get pcb 46 ~ 54, chip_temp 60 ~ 66
2022-05-01 15:03:31:frequency.c:671:inc_freq_with_fixed_vco: freq_mode 1=1 FREQ_MODE_USER, Conf.Check_Clock_Cnt=0
2022-05-01 15:03:31:driver-btm-api.c:1941:check_clock_counter_domain_last_core: freq 147 clock_counter_limit 20, no check, skip.
2022-05-01 15:03:39:frequency.c:623:inc_freq_with_fixed_vco: get pcb 45 ~ 54, chip_temp 60 ~ 66, now 220.5s, target 70.7
2022-05-01 15:03:39:frequency.c:657:inc_freq_with_fixed_vco: [10] _POSTDIV1 = 6, _POSTDIV2 = 3, USER_DIV = 1, freq = 163
2022-05-01 15:03:39:frequency.c:665:inc_freq_with_fixed_vco: set to 163M, get pcb 45 ~ 54, chip_temp 60 ~ 66
2022-05-01 15:03:39:frequency.c:671:inc_freq_with_fixed_vco: freq_mode 1=1 FREQ_MODE_USER, Conf.Check_Clock_Cnt=0
2022-05-01 15:03:39:driver-btm-api.c:1941:check_clock_counter_domain_last_core: freq 163 clock_counter_limit 23, no check, skip.
2022-05-01 15:03:47:frequency.c:623:inc_freq_with_fixed_vco: get pcb 45 ~ 54, chip_temp 61 ~ 66, now 228.5s, target 72.1
2022-05-01 15:03:47:frequency.c:657:inc_freq_with_fixed_vco: [11] _POSTDIV1 = 5, _POSTDIV2 = 3, USER_DIV = 1, freq = 196
2022-05-01 15:03:47:frequency.c:665:inc_freq_with_fixed_vco: set to 196M, get pcb 45 ~ 54, chip_temp 61 ~ 66
2022-05-01 15:03:47:frequency.c:671:inc_freq_with_fixed_vco: freq_mode 1=1 FREQ_MODE_USER, Conf.Check_Clock_Cnt=0
2022-05-01 15:03:47:driver-btm-api.c:1941:check_clock_counter_domain_last_core: freq 196 clock_counter_limit 28, no check, skip.
2022-05-01 15:03:55:frequency.c:623:inc_freq_with_fixed_vco: get pcb 45 ~ 54, chip_temp 62 ~ 67, now 236.5s, target 69.4
2022-05-01 15:03:55:frequency.c:657:inc_freq_with_fixed_vco: [12] _POSTDIV1 = 7, _POSTDIV2 = 2, USER_DIV = 1, freq = 210
2022-05-01 15:03:55:frequency.c:665:inc_freq_with_fixed_vco: set to 210M, get pcb 45 ~ 54, chip_temp 62 ~ 67
2022-05-01 15:03:55:frequency.c:671:inc_freq_with_fixed_vco: freq_mode 1=1 FREQ_MODE_USER, Conf.Check_Clock_Cnt=0
2022-05-01 15:03:55:driver-btm-api.c:1941:check_clock_counter_domain_last_core: freq 210 clock_counter_limit 30, no check, skip.
2022-05-01 15:04:03:frequency.c:623:inc_freq_with_fixed_vco: get pcb 44 ~ 54, chip_temp 62 ~ 67, now 244.5s, target 70.8
2022-05-01 15:04:03:frequency.c:657:inc_freq_with_fixed_vco: [13] _POSTDIV1 = 6, _POSTDIV2 = 2, USER_DIV = 1, freq = 245
2022-05-01 15:04:03:frequency.c:665:inc_freq_with_fixed_vco: set to 245M, get pcb 44 ~ 54, chip_temp 62 ~ 67
2022-05-01 15:04:03:frequency.c:671:inc_freq_with_fixed_vco: freq_mode 1=1 FREQ_MODE_USER, Conf.Check_Clock_Cnt=0
2022-05-01 15:04:03:driver-btm-api.c:1941:check_clock_counter_domain_last_core: freq 245 clock_counter_limit 36, no check, skip.
2022-05-01 15:04:11:frequency.c:623:inc_freq_with_fixed_vco: get pcb 44 ~ 54, chip_temp 63 ~ 68, now 252.5s, target 72.1
2022-05-01 15:04:11:frequency.c:657:inc_freq_with_fixed_vco: [14] _POSTDIV1 = 5, _POSTDIV2 = 2, USER_DIV = 1, freq = 295
2022-05-01 15:04:11:frequency.c:665:inc_freq_with_fixed_vco: set to 295M, get pcb 44 ~ 54, chip_temp 63 ~ 68
2022-05-01 15:04:11:frequency.c:671:inc_freq_with_fixed_vco: freq_mode 1=1 FREQ_MODE_USER, Conf.Check_Clock_Cnt=0
2022-05-01 15:04:11:driver-btm-api.c:1941:check_clock_counter_domain_last_core: freq 295 clock_counter_limit 44, no check, skip.
2022-05-01 15:04:19:frequency.c:623:inc_freq_with_fixed_vco: get pcb 43 ~ 54, chip_temp 65 ~ 70, now 260.5s, target 73.4
2022-05-01 15:04:19:frequency.c:657:inc_freq_with_fixed_vco: [15] _POSTDIV1 = 7, _POSTDIV2 = 1, USER_DIV = 1, freq = 421
2022-05-01 15:04:19:frequency.c:665:inc_freq_with_fixed_vco: set to 421M, get pcb 43 ~ 54, chip_temp 65 ~ 70
2022-05-01 15:04:19:power_api.c:376:set_to_voltage_by_steps: Set to voltage raw 2030, step by step.
2022-05-01 15:04:26:driver-hash-chip.c:737:dump_adc_voltage_v2: get ADC_DATAOUT from chain 0 with 0 regs timeout.
chain 0 domain 0: d0 0.382, d1 0.376, d2 0.374, d3 0.360, sum = 1.492859
chain 0 domain 1: d0 0.377, d1 0.372, d2 0.372, d3 0.371, sum = 1.491333
chain 0 domain 2: d0 0.377, d1 0.372, d2 0.373, d3 0.367, sum = 1.488953
chain 0 domain 3: d0 0.390, d1 0.381, d2 0.381, d3 0.378, sum = 1.528748
chain 0 domain 4: d0 0.393, d1 0.390, d2 0.393, d3 0.392, sum = 1.567078
chain 0 domain 5: d0 0.419, d1 0.405, d2 0.416, d3 0.413, sum = 1.653015
chain 0 domain 6: d0 0.419, d1 0.412, d2 0.413, d3 0.415, sum = 1.658997
chain 0 domain 7: d0 0.408, d1 0.399, d2 0.395, d3 0.401, sum = 1.603088
chain 0 domain 8: d0 0.398, d1 0.410, d2 0.384, d3 0.397, sum = 1.588989
chain 0 domain 9: d0 0.380, d1 0.377, d2 0.363, d3 0.366, sum = 1.485596
chain 0 domain 10: d0 0.364, d1 0.359, d2 0.356, d3 0.362, sum = 1.441162
chain 0 domain 11: d0 0.383, d1 0.377, d2 0.376, d3 0.359, sum = 1.494263
chain 0 domain 12: d0 0.384, d1 0.382, d2 0.383, d3 0.356, sum = 1.504883
2022-05-01 15:04:26:driver-hash-chip.c:493:check_adc_voltage: PASS domainn volt check: request 0.800 (index 0, open_core)
2022-05-01 15:04:26:frequency.c:671:inc_freq_with_fixed_vco: freq_mode 1=1 FREQ_MODE_USER, Conf.Check_Clock_Cnt=0
2022-05-01 15:04:26:driver-btm-api.c:1941:check_clock_counter_domain_last_core: freq 421 clock_counter_limit 64, no check, skip.
2022-05-01 15:04:29:driver-hash-chip.c:737:dump_adc_voltage_v2: get ADC_DATAOUT from chain 0 with 0 regs timeout.
chain 0 domain 0: d0 0.384, d1 0.377, d2 0.376, d3 0.358, sum = 1.495728
chain 0 domain 1: d0 0.380, d1 0.373, d2 0.376, d3 0.363, sum = 1.491882
chain 0 domain 2: d0 0.381, d1 0.375, d2 0.376, d3 0.360, sum = 1.493164
chain 0 domain 3: d0 0.389, d1 0.381, d2 0.384, d3 0.378, sum = 1.532288
chain 0 domain 4: d0 0.391, d1 0.387, d2 0.390, d3 0.389, sum = 1.556335
chain 0 domain 5: d0 0.413, d1 0.414, d2 0.398, d3 0.408, sum = 1.633118
chain 0 domain 6: d0 0.412, d1 0.406, d2 0.408, d3 0.408, sum = 1.633850
chain 0 domain 7: d0 0.404, d1 0.396, d2 0.395, d3 0.398, sum = 1.592346
chain 0 domain 8: d0 0.396, d1 0.402, d2 0.381, d3 0.393, sum = 1.571594
chain 0 domain 9: d0 0.382, d1 0.373, d2 0.370, d3 0.366, sum = 1.491089
chain 0 domain 10: d0 0.369, d1 0.364, d2 0.363, d3 0.368, sum = 1.463440
chain 0 domain 11: d0 0.384, d1 0.378, d2 0.377, d3 0.356, sum = 1.495789
chain 0 domain 12: d0 0.382, d1 0.379, d2 0.381, d3 0.355, sum = 1.496582
2022-05-01 15:04:29:driver-hash-chip.c:493:check_adc_voltage: PASS domainn volt check: request 0.800 (index 0, open_core)
2022-05-01 15:04:35:frequency.c:623:inc_freq_with_fixed_vco: get pcb 43 ~ 54, chip_temp 68 ~ 75, now 276.3s, target 76.0
2022-05-01 15:04:36:frequency.c:623:inc_freq_with_fixed_vco: get pcb 43 ~ 55, chip_temp 68 ~ 75, now 277.3s, target 76.2
2022-05-01 15:04:37:frequency.c:623:inc_freq_with_fixed_vco: get pcb 43 ~ 55, chip_temp 68 ~ 75, now 278.3s, target 76.4
2022-05-01 15:04:38:frequency.c:623:inc_freq_with_fixed_vco: get pcb 43 ~ 55, chip_temp 69 ~ 76, now 279.3s, target 76.5
2022-05-01 15:04:39:frequency.c:623:inc_freq_with_fixed_vco: get pcb 43 ~ 55, chip_temp 69 ~ 76, now 280.3s, target 76.7
2022-05-01 15:04:40:frequency.c:623:inc_freq_with_fixed_vco: get pcb 43 ~ 55, chip_temp 69 ~ 76, now 281.3s, target 76.9
2022-05-01 15:04:41:frequency.c:623:inc_freq_with_fixed_vco: get pcb 43 ~ 55, chip_temp 69 ~ 76, now 282.3s, target 77.0
2022-05-01 15:04:42:frequency.c:623:inc_freq_with_fixed_vco: get pcb 43 ~ 55, chip_temp 69 ~ 77, now 283.3s, target 77.2
2022-05-01 15:04:43:frequency.c:623:inc_freq_with_fixed_vco: get pcb 43 ~ 55, chip_temp 69 ~ 77, now 284.3s, target 77.4
2022-05-01 15:04:44:frequency.c:623:inc_freq_with_fixed_vco: get pcb 43 ~ 55, chip_temp 70 ~ 77, now 285.3s, target 77.5
2022-05-01 15:04:45:frequency.c:623:inc_freq_with_fixed_vco: get pcb 44 ~ 56, chip_temp 70 ~ 77, now 286.3s, target 77.7
2022-05-01 15:04:46:frequency.c:623:inc_freq_with_fixed_vco: get pcb 44 ~ 56, chip_temp 70 ~ 77, now 287.3s, target 77.9
2022-05-01 15:04:47:frequency.c:623:inc_freq_with_fixed_vco: get pcb 44 ~ 56, chip_temp 70 ~ 77, now 288.3s, target 78.0
2022-05-01 15:04:48:frequency.c:623:inc_freq_with_fixed_vco: get pcb 44 ~ 56, chip_temp 70 ~ 78, now 289.3s, target 78.2
2022-05-01 15:04:49:frequency.c:623:inc_freq_with_fixed_vco: get pcb 44 ~ 56, chip_temp 71 ~ 78, now 290.3s, target 78.4
2022-05-01 15:04:50:frequency.c:623:inc_freq_with_fixed_vco: get pcb 44 ~ 56, chip_temp 70 ~ 78, now 291.3s, target 78.5
2022-05-01 15:04:51:frequency.c:623:inc_freq_with_fixed_vco: get pcb 44 ~ 56, chip_temp 71 ~ 78, now 292.3s, target 78.7
2022-05-01 15:04:52:frequency.c:623:inc_freq_with_fixed_vco: get pcb 44 ~ 56, chip_temp 71 ~ 78, now 293.3s, target 78.9
2022-05-01 15:04:53:frequency.c:623:inc_freq_with_fixed_vco: get pcb 44 ~ 56, chip_temp 71 ~ 79, now 294.3s, target 79.0
2022-05-01 15:04:54:frequency.c:623:inc_freq_with_fixed_vco: get pcb 44 ~ 57, chip_temp 71 ~ 79, now 295.3s, target 79.2
2022-05-01 15:04:55:frequency.c:623:inc_freq_with_fixed_vco: get pcb 44 ~ 57, chip_temp 71 ~ 79, now 296.3s, target 79.4
2022-05-01 15:04:56:frequency.c:623:inc_freq_with_fixed_vco: get pcb 44 ~ 57, chip_temp 72 ~ 79, now 297.3s, target 79.5
2022-05-01 15:04:57:frequency.c:623:inc_freq_with_fixed_vco: get pcb 44 ~ 57, chip_temp 72 ~ 79, now 298.3s, target 79.7
2022-05-01 15:04:58:frequency.c:623:inc_freq_with_fixed_vco: get pcb 44 ~ 57, chip_temp 72 ~ 79, now 299.3s, target 79.9
2022-05-01 15:04:59:frequency.c:623:inc_freq_with_fixed_vco: get pcb 44 ~ 57, chip_temp 72 ~ 79, now 300.3s, target 80.0
2022-05-01 15:05:00:frequency.c:623:inc_freq_with_fixed_vco: get pcb 44 ~ 57, chip_temp 72 ~ 79, now 301.3s, target 80.2
2022-05-01 15:05:01:frequency.c:623:inc_freq_with_fixed_vco: get pcb 45 ~ 57, chip_temp 73 ~ 79, now 302.3s, target 80.4
2022-05-01 15:05:02:frequency.c:623:inc_freq_with_fixed_vco: get pcb 45 ~ 58, chip_temp 72 ~ 79, now 303.3s, target 80.6
2022-05-01 15:05:03:frequency.c:623:inc_freq_with_fixed_vco: get pcb 45 ~ 58, chip_temp 73 ~ 79, now 304.3s, target 80.7
2022-05-01 15:05:04:frequency.c:623:inc_freq_with_fixed_vco: get pcb 45 ~ 58, chip_temp 73 ~ 79, now 305.3s, target 80.9
2022-05-01 15:05:05:frequency.c:623:inc_freq_with_fixed_vco: get pcb 45 ~ 58, chip_temp 73 ~ 80, now 306.3s, target 81.1
2022-05-01 15:05:06:frequency.c:623:inc_freq_with_fixed_vco: get pcb 45 ~ 58, chip_temp 73 ~ 80, now 307.3s, target 81.2
2022-05-01 15:05:07:frequency.c:623:inc_freq_with_fixed_vco: get pcb 45 ~ 58, chip_temp 73 ~ 80, now 308.3s, target 81.4
2022-05-01 15:05:08:frequency.c:623:inc_freq_with_fixed_vco: get pcb 45 ~ 58, chip_temp 73 ~ 80, now 309.3s, target 81.6
2022-05-01 15:05:09:frequency.c:623:inc_freq_with_fixed_vco: get pcb 45 ~ 58, chip_temp 73 ~ 80, now 310.3s, target 81.7
2022-05-01 15:05:10:frequency.c:623:inc_freq_with_fixed_vco: get pcb 45 ~ 59, chip_temp 74 ~ 80, now 311.3s, target 81.9
2022-05-01 15:05:11:frequency.c:623:inc_freq_with_fixed_vco: get pcb 45 ~ 59, chip_temp 74 ~ 80, now 312.3s, target 82.1
2022-05-01 15:05:11:frequency.c:657:inc_freq_with_fixed_vco: [16] _POSTDIV1 = 6, _POSTDIV2 = 1, USER_DIV = 1, freq = 491
2022-05-01 15:05:11:frequency.c:665:inc_freq_with_fixed_vco: set to 491M, get pcb 45 ~ 59, chip_temp 74 ~ 80
2022-05-01 15:05:11:power_api.c:376:set_to_voltage_by_steps: Set to voltage raw 1990, step by step.
2022-05-01 15:05:16:driver-hash-chip.c:737:dump_adc_voltage_v2: get ADC_DATAOUT from chain 0 with 0 regs timeout.
chain 0 domain 0: d0 0.374, d1 0.365, d2 0.364, d3 0.367, sum = 1.469910
chain 0 domain 1: d0 0.370, d1 0.363, d2 0.365, d3 0.366, sum = 1.464294
chain 0 domain 2: d0 0.371, d1 0.365, d2 0.363, d3 0.366, sum = 1.465454
chain 0 domain 3: d0 0.382, d1 0.372, d2 0.374, d3 0.364, sum = 1.491760
chain 0 domain 4: d0 0.385, d1 0.380, d2 0.383, d3 0.350, sum = 1.498108
chain 0 domain 5: d0 0.412, d1 0.402, d2 0.407, d3 0.407, sum = 1.626892
chain 0 domain 6: d0 0.411, d1 0.403, d2 0.403, d3 0.406, sum = 1.622986
chain 0 domain 7: d0 0.398, d1 0.387, d2 0.387, d3 0.391, sum = 1.562805
chain 0 domain 8: d0 0.391, d1 0.387, d2 0.396, d3 0.391, sum = 1.565796
chain 0 domain 9: d0 0.372, d1 0.361, d2 0.361, d3 0.361, sum = 1.455505
chain 0 domain 10: d0 0.358, d1 0.351, d2 0.350, d3 0.355, sum = 1.414062
chain 0 domain 11: d0 0.376, d1 0.367, d2 0.369, d3 0.368, sum = 1.480774
chain 0 domain 12: d0 0.379, d1 0.375, d2 0.377, d3 0.362, sum = 1.493591
2022-05-01 15:05:17:driver-hash-chip.c:493:check_adc_voltage: PASS domainn volt check: request 0.800 (index 0, open_core)
2022-05-01 15:05:17:frequency.c:671:inc_freq_with_fixed_vco: freq_mode 1=1 FREQ_MODE_USER, Conf.Check_Clock_Cnt=0
2022-05-01 15:05:17:driver-btm-api.c:1941:check_clock_counter_domain_last_core: freq 491 clock_counter_limit 75, no check, skip.
2022-05-01 15:05:19:driver-hash-chip.c:737:dump_adc_voltage_v2: get ADC_DATAOUT from chain 0 with 0 regs timeout.
chain 0 domain 0: d0 0.375, d1 0.366, d2 0.366, d3 0.368, sum = 1.475220
chain 0 domain 1: d0 0.372, d1 0.365, d2 0.366, d3 0.369, sum = 1.470764
chain 0 domain 2: d0 0.373, d1 0.367, d2 0.366, d3 0.368, sum = 1.473877
chain 0 domain 3: d0 0.382, d1 0.372, d2 0.373, d3 0.364, sum = 1.491760
chain 0 domain 4: d0 0.384, d1 0.379, d2 0.382, d3 0.353, sum = 1.497437
chain 0 domain 5: d0 0.409, d1 0.401, d2 0.401, d3 0.403, sum = 1.613770
chain 0 domain 6: d0 0.407, d1 0.401, d2 0.401, d3 0.403, sum = 1.611572
chain 0 domain 7: d0 0.396, d1 0.387, d2 0.386, d3 0.389, sum = 1.557922
chain 0 domain 8: d0 0.391, d1 0.382, d2 0.382, d3 0.385, sum = 1.539185
chain 0 domain 9: d0 0.373, d1 0.363, d2 0.362, d3 0.364, sum = 1.462341
chain 0 domain 10: d0 0.360, d1 0.354, d2 0.352, d3 0.358, sum = 1.423523
chain 0 domain 11: d0 0.377, d1 0.369, d2 0.368, d3 0.369, sum = 1.482788
chain 0 domain 12: d0 0.378, d1 0.374, d2 0.376, d3 0.364, sum = 1.492432
2022-05-01 15:05:19:driver-hash-chip.c:493:check_adc_voltage: PASS domainn volt check: request 0.800 (index 0, open_core)
2022-05-01 15:05:25:frequency.c:623:inc_freq_with_fixed_vco: get pcb 46 ~ 60, chip_temp 76 ~ 83, now 326.5s, target 84.4
2022-05-01 15:05:26:frequency.c:623:inc_freq_with_fixed_vco: get pcb 46 ~ 60, chip_temp 76 ~ 83, now 327.5s, target 84.6
2022-05-01 15:05:27:frequency.c:623:inc_freq_with_fixed_vco: get pcb 46 ~ 60, chip_temp 77 ~ 83, now 328.5s, target 84.7
2022-05-01 15:05:28:frequency.c:623:inc_freq_with_fixed_vco: get pcb 46 ~ 60, chip_temp 77 ~ 83, now 329.5s, target 84.9
2022-05-01 15:05:29:frequency.c:623:inc_freq_with_fixed_vco: get pcb 46 ~ 60, chip_temp 77 ~ 83, now 330.5s, target 85.1
2022-05-01 15:05:29:frequency.c:657:inc_freq_with_fixed_vco: [17] _POSTDIV1 = 5, _POSTDIV2 = 1, USER_DIV = 1, freq = 590
2022-05-01 15:05:29:frequency.c:665:inc_freq_with_fixed_vco: set to 590M, get pcb 46 ~ 60, chip_temp 77 ~ 83
2022-05-01 15:05:29:power_api.c:376:set_to_voltage_by_steps: Set to voltage raw 1880, step by step.
2022-05-01 15:05:38:driver-hash-chip.c:737:dump_adc_voltage_v2: get ADC_DATAOUT from chain 0 with 0 regs timeout.
chain 0 domain 0: d0 0.353, d1 0.345, d2 0.343, d3 0.347, sum = 1.388672
chain 0 domain 1: d0 0.350, d1 0.344, d2 0.344, d3 0.346, sum = 1.384521
chain 0 domain 2: d0 0.351, d1 0.346, d2 0.344, d3 0.346, sum = 1.386902
chain 0 domain 3: d0 0.361, d1 0.352, d2 0.353, d3 0.355, sum = 1.421326
chain 0 domain 4: d0 0.363, d1 0.359, d2 0.361, d3 0.362, sum = 1.446045
chain 0 domain 5: d0 0.389, d1 0.380, d2 0.383, d3 0.378, sum = 1.530762
chain 0 domain 6: d0 0.388, d1 0.381, d2 0.380, d3 0.373, sum = 1.522095
chain 0 domain 7: d0 0.375, d1 0.367, d2 0.364, d3 0.365, sum = 1.471130
chain 0 domain 8: d0 0.370, d1 0.362, d2 0.363, d3 0.361, sum = 1.456909
chain 0 domain 9: d0 0.352, d1 0.342, d2 0.341, d3 0.341, sum = 1.375549
chain 0 domain 10: d0 0.338, d1 0.332, d2 0.329, d3 0.336, sum = 1.335571
chain 0 domain 11: d0 0.356, d1 0.348, d2 0.348, d3 0.349, sum = 1.400208
chain 0 domain 12: d0 0.359, d1 0.356, d2 0.357, d3 0.358, sum = 1.430054
2022-05-01 15:05:38:driver-hash-chip.c:493:check_adc_voltage: PASS domainn volt check: request 0.800 (index 0, open_core)
2022-05-01 15:05:38:frequency.c:671:inc_freq_with_fixed_vco: freq_mode 1=1 FREQ_MODE_USER, Conf.Check_Clock_Cnt=0
2022-05-01 15:05:38:driver-btm-api.c:1941:check_clock_counter_domain_last_core: freq 590 clock_counter_limit 91, no check, skip.
2022-05-01 15:05:41:driver-hash-chip.c:737:dump_adc_voltage_v2: get ADC_DATAOUT from chain 0 with 0 regs timeout.
chain 0 domain 0: d0 0.354, d1 0.347, d2 0.345, d3 0.348, sum = 1.393921
chain 0 domain 1: d0 0.352, d1 0.345, d2 0.346, d3 0.347, sum = 1.389526
chain 0 domain 2: d0 0.353, d1 0.347, d2 0.347, d3 0.348, sum = 1.394470
chain 0 domain 3: d0 0.361, d1 0.352, d2 0.354, d3 0.355, sum = 1.421875
chain 0 domain 4: d0 0.362, d1 0.358, d2 0.359, d3 0.361, sum = 1.439941
chain 0 domain 5: d0 0.386, d1 0.378, d2 0.380, d3 0.353, sum = 1.496643
chain 0 domain 6: d0 0.384, d1 0.378, d2 0.378, d3 0.355, sum = 1.495178
chain 0 domain 7: d0 0.374, d1 0.365, d2 0.363, d3 0.365, sum = 1.466675
chain 0 domain 8: d0 0.368, d1 0.362, d2 0.360, d3 0.363, sum = 1.452393
chain 0 domain 9: d0 0.352, d1 0.344, d2 0.342, d3 0.342, sum = 1.380371
chain 0 domain 10: d0 0.341, d1 0.335, d2 0.333, d3 0.339, sum = 1.347046
chain 0 domain 11: d0 0.356, d1 0.348, d2 0.349, d3 0.349, sum = 1.402527
chain 0 domain 12: d0 0.358, d1 0.354, d2 0.355, d3 0.357, sum = 1.423950
2022-05-01 15:05:41:driver-hash-chip.c:493:check_adc_voltage: PASS domainn volt check: request 0.800 (index 0, open_core)
2022-05-01 15:05:41:frequency.c:442:inc_asic_diff_freq_by_steps: chain = 0, start = 590, freq_step = 5
2022-05-01 15:05:48:driver-btm-api.c:666:set_timeout: freq = 640, percent = 90, hcn = 707788, timeout = 1104
2022-05-01 15:05:48:power_api.c:353:set_to_working_voltage_by_steps: Set to voltage raw 1850, step by step.
2022-05-01 15:05:53:thread.c:1533:create_check_system_status_thread: create thread
2022-05-01 15:05:53:thread.c:1508:create_asic_status_monitor_thread: create thread
2022-05-01 15:05:53:driver-btm-api.c:2599:bitmain_soc_init: Init done!
2022-05-01 15:05:58:driver-btm-api.c:247:set_miner_status: STATUS_OKAY
2022-05-01 15:05:59:frequency.c:107:get_ideal_hash_rate_GH: ideal_hash_rate = 18559
2022-05-01 15:05:59:frequency.c:128:get_sale_hash_rate_GH: sale_hash_rate = 16000
2022-05-01 15:06:03:driver-btm-api.c:1634:dhash_chip_send_job: Version num 8
2022-05-01 15:06:03:driver-btm-api.c:1778:dhash_chip_send_job: stime.tv_sec 1651417563, block_ntime 1651417562
2022-05-01 15:18:34:thread.c:385:dec_freq_for_temp: start adjust freq, dec_freq = 25
-
Please send us the newest Kernel log and miner status screenshot.
To ensure the security of your information, please send the newest kernel log in text form.(Please don't copy and paste here,it's not safe.)
Please check the below link for How to copy kernel log into text form
https://support.bitmain.com/hc/en-us/articles/360016522253-How-to-copy-Kernel-Log-into-text-form
We will check and help you. -
Here is some information you may need.
https://support.bitmain.com/hc/en-us/articles/360021030633-FAQ-for-Miner
Please sign in to leave a comment.
Comments
2 comments