Issues with S19 Pro 110TH/s. Please advise

free_area_init_node: node 0, pgdat c0b3c040, node_mem_map cde10000
  Normal zone: 480 pages used for memmap
  Normal zone: 0 pages reserved
  Normal zone: 61440 pages, LIFO batch:15
percpu: Embedded 12 pages/cpu @cddf0000 s19916 r8192 d21044 u49152
pcpu-alloc: s19916 r8192 d21044 u49152 alloc=12*4096
pcpu-alloc: [0] 0 [0] 1 
Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 60960
Kernel command line: mem=240M console=ttyPS0,115200 ramdisk_size=33554432 root=/dev/ram rw earlyprintk
PID hash table entries: 1024 (order: 0, 4096 bytes)
Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
Memory: 209652K/245760K available (6317K kernel code, 243K rwdata, 1932K rodata, 1024K init, 232K bss, 19724K reserved, 16384K cma-reserved, 0K highmem)
Virtual kernel memory layout:
    vector  : 0xffff0000 - 0xffff1000   (   4 kB)
    fixmap  : 0xffc00000 - 0xfff00000   (3072 kB)
    vmalloc : 0xcf800000 - 0xff800000   ( 768 MB)
    lowmem  : 0xc0000000 - 0xcf000000   ( 240 MB)
    pkmap   : 0xbfe00000 - 0xc0000000   (   2 MB)
    modules : 0xbf000000 - 0xbfe00000   (  14 MB)
      .text : 0xc0008000 - 0xc090e410   (9242 kB)
      .init : 0xc0a00000 - 0xc0b00000   (1024 kB)
      .data : 0xc0b00000 - 0xc0b3cda0   ( 244 kB)
       .bss : 0xc0b3cda0 - 0xc0b77024   ( 233 kB)
Preemptible hierarchical RCU implementation.
    Build-time adjustment of leaf fanout to 32.
    RCU restricting CPUs from NR_CPUS=4 to nr_cpu_ids=2.
RCU: Adjusting geometry for rcu_fanout_leaf=32, nr_cpu_ids=2
NR_IRQS:16 nr_irqs:16 16
efuse mapped to cf800000
ps7-slcr mapped to cf802000
L2C: platform modifies aux control register: 0x72360000 -> 0x72760000
L2C: DT/platform modifies aux control register: 0x72360000 -> 0x72760000
L2C-310 erratum 769419 enabled
L2C-310 enabling early BRESP for Cortex-A9
L2C-310 full line of zeros enabled for Cortex-A9
L2C-310 ID prefetch enabled, offset 1 lines
L2C-310 dynamic clock gating enabled, standby mode enabled
L2C-310 cache controller enabled, 8 ways, 512 kB
L2C-310: CACHE_ID 0x410000c8, AUX_CTRL 0x76760001
zynq_clock_init: clkc starts at cf802100
Zynq clock init
sched_clock: 64 bits at 333MHz, resolution 3ns, wraps every 4398046511103ns
clocksource: arm_global_timer: mask: 0xffffffffffffffff max_cycles: 0x4ce07af025, max_idle_ns: 440795209040 ns
Switching to timer-based delay loop, resolution 3ns
clocksource: ttc_clocksource: mask: 0xffff max_cycles: 0xffff, max_idle_ns: 537538477 ns
ps7-ttc #0 at cf80a000, irq=18
Console: colour dummy device 80x30
Calibrating delay loop (skipped), value calculated using timer frequency.. 666.66 BogoMIPS (lpj=3333333)
pid_max: default: 32768 minimum: 301
Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
CPU: Testing write buffer coherency: ok
CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
Setting up static identity map for 0x100000 - 0x100058
CPU1: failed to boot: -1
Brought up 1 CPUs
SMP: Total of 1 processors activated (666.66 BogoMIPS).
CPU: All CPU(s) started in SVC mode.
devtmpfs: initialized
VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 4
clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
pinctrl core: initialized pinctrl subsystem
NET: Registered protocol family 16
DMA: preallocated 256 KiB pool for atomic coherent allocations
cpuidle: using governor menu
hw-breakpoint: found 5 (+1 reserved) breakpoint and 1 watchpoint registers.
hw-breakpoint: maximum watchpoint size is 4 bytes.
zynq-ocm f800c000.ps7-ocmc: ZYNQ OCM pool: 256 KiB @ 0xcf880000
vgaarb: loaded
SCSI subsystem initialized
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
media: Linux media interface: v0.10
Linux video capture interface: v2.00
pps_core: LinuxPPS API ver. 1 registered
pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
PTP clock support registered
EDAC MC: Ver: 3.0.0
Advanced Linux Sound Architecture Driver Initialized.
clocksource: Switched to clocksource arm_global_timer
NET: Registered protocol family 2
TCP established hash table entries: 2048 (order: 1, 8192 bytes)
TCP bind hash table entries: 2048 (order: 2, 16384 bytes)
TCP: Hash tables configured (established 2048 bind 2048)
UDP hash table entries: 256 (order: 1, 8192 bytes)
UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
NET: Registered protocol family 1
RPC: Registered named UNIX socket transport module.
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
RPC: Registered tcp NFSv4.1 backchannel transport module.
PCI: CLS 0 bytes, default 64
Trying to unpack rootfs image as initramfs...
rootfs image is not initramfs (no cpio magic); looks like an initrd
Freeing initrd memory: 6652K (cd47b000 - cdafa000)
hw perfevents: enabled with armv7_cortex_a9 PMU driver, 7 counters available
futex hash table entries: 512 (order: 3, 32768 bytes)
workingset: timestamp_bits=28 max_order=16 bucket_order=0
jffs2: version 2.2. (NAND) (SUMMARY)  © 2001-2006 Red Hat, Inc.
io scheduler noop registered
io scheduler deadline registered
io scheduler cfq registered (default)
dma-pl330 f8003000.ps7-dma: Loaded driver for PL330 DMAC-241330
dma-pl330 f8003000.ps7-dma:     DBUFF-128x8bytes Num_Chans-8 Num_Peri-4 Num_Events-16
e0000000.serial: ttyPS0 at MMIO 0xe0000000 (irq = 159, base_baud = 6249999) is a xuartps
console [ttyPS0] enabled
xdevcfg f8007000.ps7-dev-cfg: ioremap 0xf8007000 to cf86e000
[drm] Initialized drm 1.1.0 20060810
brd: module loaded
loop: module loaded
CAN device driver interface
gpiod_set_value: invalid GPIO
libphy: MACB_mii_bus: probed
macb e000b000.ethernet eth0: Cadence GEM rev 0x00020118 at 0xe000b000 irq 31 (00:0a:35:00:00:00)
Generic PHY e000b000.etherne:00: attached PHY driver [Generic PHY] (mii_bus:phy_addr=e000b000.etherne:00, irq=-1)
e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k
e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci-pci: EHCI PCI platform driver
usbcore: registered new interface driver usb-storage
mousedev: PS/2 mouse device common for all mice
i2c /dev entries driver
cdns-i2c e0005000.ps7_i2c: 100 kHz mmio e0005000 irq 154
Xilinx Zynq CpuIdle Driver started
sdhci: Secure Digital Host Controller Interface driver
sdhci: Copyright(c) Pierre Ossman
sdhci-pltfm: SDHCI platform and OF driver helper
mmc0: SDHCI controller on e0100000.ps7-sdio [e0100000.ps7-sdio] using ADMA
ledtrig-cpu: registered to indicate activity on CPUs
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
nand: disable subpage write
nand: device found, Manufacturer ID: 0x2c, Chip ID: 0xda
nand: Micron MT29F2G08ABAEAWP
nand: 256 MiB, SLC, erase size: 128 KiB, page size: 2048, OOB size: 64
nand: NAND_ECC_HW
nand: NAND_ECC_HW_SYNDROME
mtd->writesize = 2048
ecc->strength = 1
ecc->size = 2048
mtd->writesize = 2048
chip->ecc_strength_ds = 4
chip->ecc_step_ds = 512
nand: WARNING: pl35x-nand: the ECC used on your system is too weak compared to the one required by the NAND chip
Bad block table found at page 131008, version 0x01
Bad block table found at page 130944, version 0x01
8 ofpart partitions found on MTD device pl35x-nand
Creating 8 MTD partitions on "pl35x-nand":
0x000000000000-0x000002800000 : "BOOT.bin-dts-marker-kernel"
0x000002800000-0x000004800000 : "ramfs"
0x000004800000-0x000005000000 : "configs"
0x000005000000-0x000005200000 : "sig"
0x000005200000-0x000006000000 : "reserve1"
0x000006000000-0x000007000000 : "upgrade-ramfs"
0x000007000000-0x00000a800000 : "upgrade-file"
0x00000a800000-0x000010000000 : "reserve2"
nf_conntrack version 0.5.0 (3635 buckets, 14540 max)
ip_tables: (C) 2000-2006 Netfilter Core Team
NET: Registered protocol family 10
ip6_tables: (C) 2000-2006 Netfilter Core Team
sit: IPv6 over IPv4 tunneling driver
NET: Registered protocol family 17
can: controller area network core (rev 20120528 abi 9)
NET: Registered protocol family 29
can: raw protocol (rev 20120528)
can: broadcast manager protocol (rev 20120528 t)
can: netlink gateway (rev 20130117) max_hops=1
zynq_pm_ioremap: no compatible node found for 'xlnx,zynq-ddrc-a05'
zynq_pm_late_init: Unable to map DDRC IO memory.
Registering SWP/SWPB emulation handler
hctosys: unable to open rtc device (rtc0)
ALSA device list:
  No soundcards found.
RAMDISK: gzip image found at block 0
EXT4-fs (ram0): couldn't mount as ext3 due to feature incompatibilities
EXT4-fs warning (device ram0): ext4_update_dynamic_rev:746: updating to rev 1 because of new feature flag, running e2fsck is recommended
EXT4-fs (ram0): mounted filesystem without journal. Opts: (null)
VFS: Mounted root (ext4 filesystem) on device 1:0.
devtmpfs: mounted
Freeing unused kernel memory: 1024K (c0a00000 - c0b00000)
EXT4-fs (ram0): re-mounted. Opts: block_validity,delalloc,barrier,user_xattr,errors=remount-ro
devpts: called with bogus options
ubi0: attaching mtd2
ubi0: scanning is finished
ubi0: attached mtd2 (name "configs", size 8 MiB)
ubi0: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes
ubi0: min./max. I/O unit sizes: 2048/2048, sub-page size 2048
ubi0: VID header offset: 2048 (aligned 2048), data offset: 4096
ubi0: good PEBs: 64, bad PEBs: 0, corrupted PEBs: 0
ubi0: user volume: 1, internal volumes: 1, max. volumes count: 128
ubi0: max/mean erase counter: 8/3, WL threshold: 4096, image sequence number: 385729724
ubi0: available PEBs: 0, total reserved PEBs: 64, PEBs reserved for bad PEB handling: 4
ubi0: background thread "ubi_bgt0d" started, PID 729
UBIFS (ubi0:0): background thread "ubifs_bgt0_0" started, PID 733
UBIFS (ubi0:0): recovery needed
UBIFS (ubi0:0): recovery completed
UBIFS (ubi0:0): UBIFS: mounted UBI device 0, volume 0, name "config_data"
UBIFS (ubi0:0): LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
UBIFS (ubi0:0): FS size: 5840896 bytes (5 MiB, 46 LEBs), journal size 1015809 bytes (0 MiB, 6 LEBs)
UBIFS (ubi0:0): reserved for root: 275879 bytes (269 KiB)
UBIFS (ubi0:0): media format: w4/r0 (latest is w4/r0), UUID E4CC1E8C-4249-413F-8108-DCA325C9667A, small LPT model
ubi2: attaching mtd4
ubi2: scanning is finished
ubi2: attached mtd4 (name "reserve1", size 14 MiB)
ubi2: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes
ubi2: min./max. I/O unit sizes: 2048/2048, sub-page size 2048
ubi2: VID header offset: 2048 (aligned 2048), data offset: 4096
ubi2: good PEBs: 112, bad PEBs: 0, corrupted PEBs: 0
ubi2: user volume: 1, internal volumes: 1, max. volumes count: 128
ubi2: max/mean erase counter: 7/3, WL threshold: 4096, image sequence number: 2353645425
ubi2: available PEBs: 0, total reserved PEBs: 112, PEBs reserved for bad PEB handling: 4
ubi2: background thread "ubi_bgt2d" started, PID 740
UBIFS (ubi2:0): background thread "ubifs_bgt2_0" started, PID 744
UBIFS (ubi2:0): recovery needed
UBIFS (ubi2:0): recovery completed
UBIFS (ubi2:0): UBIFS: mounted UBI device 2, volume 0, name "misc"
UBIFS (ubi2:0): LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
UBIFS (ubi2:0): FS size: 11935744 bytes (11 MiB, 94 LEBs), journal size 1015809 bytes (0 MiB, 6 LEBs)
UBIFS (ubi2:0): reserved for root: 563754 bytes (550 KiB)
UBIFS (ubi2:0): media format: w4/r0 (latest is w4/r0), UUID 94562155-B75A-4B8B-A38B-0741D118E0C9, small LPT model
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
random: avahi-daemon urandom read with 2 bits of entropy available
macb e000b000.ethernet eth0: unable to generate target frequency: 25000000 Hz
macb e000b000.ethernet eth0: link up (100/Full)
IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
In axi fpga driver!
request_mem_region OK!
AXI fpga dev virtual address is 0xcfbc8000
*base_vir_addr = 0xb031
In fpga mem driver!
request_mem_region OK!
fpga mem virtual address is 0xd2000000
random: nonblocking pool is initialized

===========================================Miner log===========================================
1970-01-01 00:00:09 Miner compile time: Tue Nov 16 19:20:40 CST 2021 type: Antminer S19 Pro
1970-01-01 00:00:10 This is fix-freq version
1970-01-01 00:00:10 Miner compile time: Tue Nov 16 19:20:40 CST 2021 type: Antminer S19 Pro
1970-01-01 00:00:10 commit version: 386747fa 2021-10-21 19:58:45, build by: jenkins 2021-11-16 19:37:57
1970-01-01 00:00:10 opt_multi_version     = 1
1970-01-01 00:00:10 opt_bitmain_ab        = 1
1970-01-01 00:00:10 mid_auto_gen          = 0
1970-01-01 00:00:10 opt_bitmain_work_mode = 0
1970-01-01 00:00:10 mmap fpga_mem_addr_hal = 0xb5800000
1970-01-01 00:00:10 HASH_ON_PLUG V9 = 0x7
1970-01-01 00:00:10 Note: front fan is power on!
1970-01-01 00:00:10 Note: rear fan is power on!
1970-01-01 00:00:10 start the http log.
1970-01-01 00:00:10 httpListenThread start ret=0
1970-01-01 00:00:10 start listen on 6060 ...
1970-01-01 00:00:10 load machine NBP1901 conf
1970-01-01 00:00:10 machine : NBP1901 
1970-01-01 00:00:10 chain_num 4, chain_domain_num 38, chain_asic_num 114, domain_asic_num 3
2022-01-20 16:09:25 miner ID : 80729c893efaa854
2022-01-20 16:09:25 FPGA Version = 0xB031
2022-01-20 16:09:25 HASH_ON_PLUG V9 = 0x7
2022-01-20 16:09:25 ==========================capability start==========================
2022-01-20 16:09:25 board num = 3
2022-01-20 16:09:25 board id = 0, chain num = 1
2022-01-20 16:09:25     chain id = 0
2022-01-20 16:09:25 board id = 1, chain num = 1
2022-01-20 16:09:25     chain id = 1
2022-01-20 16:09:25 board id = 2, chain num = 1
2022-01-20 16:09:25     chain id = 2
2022-01-20 16:09:25 ==========================capability end============================
2022-01-20 16:09:25 chain num = 3
2022-01-20 16:09:27 [chain 0]
2022-01-20 16:09:27 0x0000 11 4A 85 CF 2F CB 2B D6   61 E7 83 10 F8 7E ED 59 
2022-01-20 16:09:27 0x0010 00 6E 9C 98 C5 58 B8 31   01 D8 0B 50 1C B2 BE 58 
2022-01-20 16:09:27 0x0020 20 93 5D 6B 96 B6 6F 05   9B 95 52 89 1D 72 5D 21 
2022-01-20 16:09:27 0x0030 D9 06 27 18 0C 91 50 65   6D 1C D4 8E E3 95 64 C8 
2022-01-20 16:09:27 0x0040 B6 EB F0 67 37 E4 8E 62   75 71 FF FF FF FF FF FF 
2022-01-20 16:09:27 0x0050 FF FF FF FF FF FF FF FF   FF FF FF FF FF FF FF FF 
2022-01-20 16:09:27 0x0060 FF FF FF FF FF FF FF FF   FF FF FF FF FF FF FF FF 
2022-01-20 16:09:27 0x0070 FF FF FF FF FF FF FF FF   FF FF FF FF FF FF FF FF 
2022-01-20 16:09:27 0x0080 FF FF FF FF FF FF FF FF   FF FF FF FF FF FF FF FF 
2022-01-20 16:09:27 0x0090 FF FF FF FF FF FF FF FF   FF FF FF FF FF FF FF FF 
2022-01-20 16:09:27 0x00A0 FF FF FF FF FF FF FF FF   FF FF FF FF FF FF FF FF 
2022-01-20 16:09:27 0x00B0 FF FF FF FF FF FF FF FF   FF FF FF FF FF FF FF FF 
2022-01-20 16:09:27 0x00C0 FF FF FF FF FF FF FF FF   FF FF FF FF FF FF FF FF 
2022-01-20 16:09:27 0x00D0 FF FF FF FF FF FF FF FF   FF FF FF FF FF FF FF FF 
2022-01-20 16:09:27 0x00E0 FF FF FF FF FF FF FF FF   FF FF FF FF FF FF FF FF 
2022-01-20 16:09:27 0x00F0 FF FF FF FF FF FF FF FF   FF FF FF FF FF FF FF 5A 
2022-01-20 16:09:27 
2022-01-20 16:09:29 [chain 1]
2022-01-20 16:09:29 0x0000 11 4A 01 24 3F 30 7C F7   4C 6C 35 3C CE 8F 8F 2B 
2022-01-20 16:09:29 0x0010 58 58 22 11 28 67 B0 1E   D8 67 60 93 EE A1 9C 75 
2022-01-20 16:09:29 0x0020 84 7B BA 96 03 8A 76 3E   81 7C 47 93 EC 46 D1 0F 
2022-01-20 16:09:29 0x0030 2E 8E 9E 47 4F FF B5 40   BF F2 E3 A1 8F 0C 72 C6 
2022-01-20 16:09:29 0x0040 FF 3C 63 88 39 A5 CA 10   A0 6E FF FF FF FF FF FF 
2022-01-20 16:09:29 0x0050 FF FF FF FF FF FF FF FF   FF FF FF FF FF FF FF FF 
2022-01-20 16:09:29 0x0060 FF FF FF FF FF FF FF FF   FF FF FF FF FF FF FF FF 
2022-01-20 16:09:29 0x0070 FF FF FF FF FF FF FF FF   FF FF FF FF FF FF FF FF 
2022-01-20 16:09:29 0x0080 FF FF FF FF FF FF FF FF   FF FF FF FF FF FF FF FF 
2022-01-20 16:09:29 0x0090 FF FF FF FF FF FF FF FF   FF FF FF FF FF FF FF FF 
2022-01-20 16:09:29 0x00A0 FF FF FF FF FF FF FF FF   FF FF FF FF FF FF FF FF 
2022-01-20 16:09:29 0x00B0 FF FF FF FF FF FF FF FF   FF FF FF FF FF FF FF FF 
2022-01-20 16:09:29 0x00C0 FF FF FF FF FF FF FF FF   FF FF FF FF FF FF FF FF 
2022-01-20 16:09:29 0x00D0 FF FF FF FF FF FF FF FF   FF FF FF FF FF FF FF FF 
2022-01-20 16:09:29 0x00E0 FF FF FF FF FF FF FF FF   FF FF FF FF FF FF FF FF 
2022-01-20 16:09:29 0x00F0 FF FF FF FF FF FF FF FF   FF FF FF FF FF FF FF 5A 
2022-01-20 16:09:29 
2022-01-20 16:09:31 [chain 2]
2022-01-20 16:09:31 0x0000 11 4A 4E 9B 13 D3 17 D7   0F 45 39 C0 8B 3C A0 2B 
2022-01-20 16:09:31 0x0010 E4 CF 2D 47 0A FE 4B 02   2E A8 65 4A 90 0A 1F D1 
2022-01-20 16:09:31 0x0020 75 FA EE A1 99 27 31 E4   40 51 5D 5A 08 6C 23 12 
2022-01-20 16:09:31 0x0030 A6 6E 66 43 60 9F 9A D7   0D 9B 6B 3D 77 39 63 2E 
2022-01-20 16:09:31 0x0040 3D 29 7A 8A 7C 0A 13 E0   73 92 FF FF FF FF FF FF 
2022-01-20 16:09:31 0x0050 FF FF FF FF FF FF FF FF   FF FF FF FF FF FF FF FF 
2022-01-20 16:09:31 0x0060 FF FF FF FF FF FF FF FF   FF FF FF FF FF FF FF FF 
2022-01-20 16:09:31 0x0070 FF FF FF FF FF FF FF FF   FF FF FF FF FF FF FF FF 
2022-01-20 16:09:31 0x0080 FF FF FF FF FF FF FF FF   FF FF FF FF FF FF FF FF 
2022-01-20 16:09:31 0x0090 FF FF FF FF FF FF FF FF   FF FF FF FF FF FF FF FF 
2022-01-20 16:09:31 0x00A0 FF FF FF FF FF FF FF FF   FF FF FF FF FF FF FF FF 
2022-01-20 16:09:31 0x00B0 FF FF FF FF FF FF FF FF   FF FF FF FF FF FF FF FF 
2022-01-20 16:09:31 0x00C0 FF FF FF FF FF FF FF FF   FF FF FF FF FF FF FF FF 
2022-01-20 16:09:31 0x00D0 FF FF FF FF FF FF FF FF   FF FF FF FF FF FF FF FF 
2022-01-20 16:09:31 0x00E0 FF FF FF FF FF FF FF FF   FF FF FF FF FF FF FF FF 
2022-01-20 16:09:31 0x00F0 FF FF FF FF FF FF FF FF   FF FF FF FF FF FF FF 5A 
2022-01-20 16:09:31 
2022-01-20 16:09:31 fan_eft : 1  fan_pwm : 100
2022-01-20 16:09:31 create thread
2022-01-20 16:09:31 fixed working voltage = 1260
2022-01-20 16:09:31 Chain [0] PCB Version: 0x011e
2022-01-20 16:09:31 Chain [0] BOM Version: 0x0100
2022-01-20 16:09:31 Chain [1] PCB Version: 0x011e
2022-01-20 16:09:31 Chain [1] BOM Version: 0x0100
2022-01-20 16:09:31 Chain [2] PCB Version: 0x011e
2022-01-20 16:09:31 Chain [2] BOM Version: 0x0100
2022-01-20 16:09:35 Fan check passed.
2022-01-20 16:09:36 chain[0] PIC jump to app
2022-01-20 16:09:37 Check chain[0] PIC fw version=0x89
2022-01-20 16:09:38 chain[1] PIC jump to app
2022-01-20 16:09:40 Check chain[1] PIC fw version=0x89
2022-01-20 16:09:41 chain[2] PIC jump to app
2022-01-20 16:09:43 Check chain[2] PIC fw version=0x89
2022-01-20 16:09:43 create thread
2022-01-20 16:09:43 max sensor num = 4
2022-01-20 16:09:43 temperature_monitor_thread start...
2022-01-20 16:09:47 power type version: 0x0071
2022-01-20 16:09:47 Enter sleep to make sure power release finish.
2022-01-20 16:10:18 Slept 30 seconds, diff = 1.
2022-01-20 16:10:18 set_voltage_by_steps to 1500.
2022-01-20 16:10:23 start up min temp by 75a = 26
2022-01-20 16:10:23 set UART baud to 115200
2022-01-20 16:10:28 chain avg vol rise to 15.37
2022-01-20 16:10:31 Chain[0]: find 0 asic, times 0
2022-01-20 16:10:39 Chain[0]: find 0 asic, times 1
2022-01-20 16:10:48 Chain[0]: find 0 asic, times 2
2022-01-20 16:10:48 Chain 0 only find 0 asic, will power off hash board 0
2022-01-20 16:10:57 Chain[1]: find 114 asic, times 0
2022-01-20 16:11:04 Chain[2]: find 114 asic, times 0
2022-01-20 16:11:04 pulse_mode = 1, ccdly_sel = 1, pwth_sel = 1
2022-01-20 16:11:08 min freq in eeprom = 525
2022-01-20 16:11:08 fixed frequency is 525
2022-01-20 16:11:08 Bring up temperature is 26
2022-01-20 16:11:08 set UART baud to 12000000
2022-01-20 16:11:08 set_voltage_by_steps to 1260.
2022-01-20 16:11:15 STATUS_INITED: soc init done!
2022-01-20 16:11:15 create thread
2022-01-20 16:11:15 create thread
2022-01-20 16:11:15 fan_etf: Set fixed fan speed=100
2022-01-20 16:11:18 start to init...
2022-01-20 16:11:26 Init done!
2022-01-20 16:11:26 STATUS_OKAY
2022-01-20 16:11:26 start the cached job
2022-01-20 16:11:26 Version num 8
2022-01-20 16:11:26 Mask num 0xe000
2022-01-20 16:11:26 freq = 525, percent = 90, hcn = 12480, timeout = 449
2022-01-20 16:11:26 set_start_time_point total_tv_start_sys=138 total_tv_end_sys=139