T17e is_temp_sensor_type_correct: Wrong temp sensor

Hello,

I have an issue with one of my T17e. The kernel log says that temp sensor is wrong and it kills the hashboards. Could you please have a look?

I tried to flash it using the latest firmaware available (with SD card) but the issue remains... Could you please have a look on the following log and tell me what is wrong with it...? Thanks in advance

Bestr Regards

Antonin

[ 0.000000] Booting Linux on physical CPU 0x0
[ 0.000000] Linux version 4.6.0-xilinx-gff8137b-dirty (lzq@armdev2) (gcc version 4.8.3 20140320 (prerelease) (Sourcery CodeBench Lite 2014.05-23) ) #25 SMP PREEMPT Fri Nov 23 15:30:52 CST 2018
[ 0.000000] CPU: ARMv7 Processor [413fc090] revision 0 (ARMv7), cr=18c5387d
[ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
[ 0.000000] Machine model: Xilinx Zynq
[ 0.000000] cma: Reserved 16 MiB at 0x0e000000
[ 0.000000] Memory policy: Data cache writealloc
[ 0.000000] On node 0 totalpages: 61440
[ 0.000000] free_area_init_node: node 0, pgdat c0b39280, node_mem_map cde10000
[ 0.000000] Normal zone: 480 pages used for memmap
[ 0.000000] Normal zone: 0 pages reserved
[ 0.000000] Normal zone: 61440 pages, LIFO batch:15
[ 0.000000] percpu: Embedded 12 pages/cpu @cddf1000 s19776 r8192 d21184 u49152
[ 0.000000] pcpu-alloc: s19776 r8192 d21184 u49152 alloc=12*4096
[ 0.000000] pcpu-alloc: [0] 0 [0] 1 
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 60960
[ 0.000000] Kernel command line: mem=240M console=ttyPS0,115200 ramdisk_size=33554432 root=/dev/ram rw earlyprintk
[ 0.000000] PID hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.000000] Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.000000] Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
[ 0.000000] Memory: 190864K/245760K available (6345K kernel code, 231K rwdata, 1896K rodata, 1024K init, 223K bss, 38512K reserved, 16384K cma-reserved, 0K highmem)
[ 0.000000] Virtual kernel memory layout:
[ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
[ 0.000000] fixmap : 0xffc00000 - 0xfff00000 (3072 kB)
[ 0.000000] vmalloc : 0xcf800000 - 0xff800000 ( 768 MB)
[ 0.000000] lowmem : 0xc0000000 - 0xcf000000 ( 240 MB)
[ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
[ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB)
[ 0.000000] .text : 0xc0008000 - 0xc090c424 (9234 kB)
[ 0.000000] .init : 0xc0a00000 - 0xc0b00000 (1024 kB)
[ 0.000000] .data : 0xc0b00000 - 0xc0b39fe0 ( 232 kB)
[ 0.000000] .bss : 0xc0b39fe0 - 0xc0b71c28 ( 224 kB)
[ 0.000000] Preemptible hierarchical RCU implementation.
[ 0.000000] Build-time adjustment of leaf fanout to 32.
[ 0.000000] RCU restricting CPUs from NR_CPUS=4 to nr_cpu_ids=2.
[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=32, nr_cpu_ids=2
[ 0.000000] NR_IRQS:16 nr_irqs:16 16
[ 0.000000] efuse mapped to cf800000
[ 0.000000] ps7-slcr mapped to cf802000
[ 0.000000] L2C: platform modifies aux control register: 0x72360000 -> 0x72760000
[ 0.000000] L2C: DT/platform modifies aux control register: 0x72360000 -> 0x72760000
[ 0.000000] L2C-310 erratum 769419 enabled
[ 0.000000] L2C-310 enabling early BRESP for Cortex-A9
[ 0.000000] L2C-310 full line of zeros enabled for Cortex-A9
[ 0.000000] L2C-310 ID prefetch enabled, offset 1 lines
[ 0.000000] L2C-310 dynamic clock gating enabled, standby mode enabled
[ 0.000000] L2C-310 cache controller enabled, 8 ways, 512 kB
[ 0.000000] L2C-310: CACHE_ID 0x410000c8, AUX_CTRL 0x76760001
[ 0.000000] zynq_clock_init: clkc starts at cf802100
[ 0.000000] Zynq clock init
[ 0.000011] sched_clock: 64 bits at 333MHz, resolution 3ns, wraps every 4398046511103ns
[ 0.000030] clocksource: arm_global_timer: mask: 0xffffffffffffffff max_cycles: 0x4ce07af025, max_idle_ns: 440795209040 ns
[ 0.000055] Switching to timer-based delay loop, resolution 3ns
[ 0.000294] clocksource: ttc_clocksource: mask: 0xffff max_cycles: 0xffff, max_idle_ns: 537538477 ns
[ 0.000320] ps7-ttc #0 at cf80a000, irq=18
[ 0.000556] Console: colour dummy device 80x30
[ 0.000571] Calibrating delay loop (skipped), value calculated using timer frequency.. 666.66 BogoMIPS (lpj=3333333)
[ 0.000585] pid_max: default: 32768 minimum: 301
[ 0.000713] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.000723] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.001330] CPU: Testing write buffer coherency: ok
[ 0.001528] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
[ 0.001580] Setting up static identity map for 0x100000 - 0x100058
[ 0.100282] CPU1: failed to boot: -1
[ 0.100314] Brought up 1 CPUs
[ 0.100324] SMP: Total of 1 processors activated (666.66 BogoMIPS).
[ 0.100330] CPU: All CPU(s) started in SVC mode.
[ 0.101119] devtmpfs: initialized
[ 0.103198] VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 4
[ 0.103631] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
[ 0.104587] pinctrl core: initialized pinctrl subsystem
[ 0.105680] NET: Registered protocol family 16
[ 0.107358] DMA: preallocated 256 KiB pool for atomic coherent allocations
[ 0.150234] cpuidle: using governor menu
[ 0.159116] hw-breakpoint: found 5 (+1 reserved) breakpoint and 1 watchpoint registers.
[ 0.159127] hw-breakpoint: maximum watchpoint size is 4 bytes.
[ 0.159272] zynq-ocm f800c000.ps7-ocmc: ZYNQ OCM pool: 256 KiB @ 0xcf880000
[ 0.220810] vgaarb: loaded
[ 0.221157] SCSI subsystem initialized
[ 0.221439] usbcore: registered new interface driver usbfs
[ 0.221508] usbcore: registered new interface driver hub
[ 0.221941] usbcore: registered new device driver usb
[ 0.222480] media: Linux media interface: v0.10
[ 0.222592] Linux video capture interface: v2.00
[ 0.222755] pps_core: LinuxPPS API ver. 1 registered
[ 0.222763] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[ 0.222844] PTP clock support registered
[ 0.223022] EDAC MC: Ver: 3.0.0
[ 0.230621] Advanced Linux Sound Architecture Driver Initialized.
[ 0.241224] clocksource: Switched to clocksource arm_global_timer
[ 0.259514] NET: Registered protocol family 2
[ 0.260525] TCP established hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.260562] TCP bind hash table entries: 2048 (order: 2, 16384 bytes)
[ 0.260607] TCP: Hash tables configured (established 2048 bind 2048)
[ 0.260655] UDP hash table entries: 256 (order: 1, 8192 bytes)
[ 0.260683] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
[ 0.260888] NET: Registered protocol family 1
[ 0.271589] RPC: Registered named UNIX socket transport module.
[ 0.271597] RPC: Registered udp transport module.
[ 0.271602] RPC: Registered tcp transport module.
[ 0.271607] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 0.271631] PCI: CLS 0 bytes, default 64
[ 0.271849] Trying to unpack rootfs image as initramfs...
[ 0.272448] rootfs image is not initramfs (no cpio magic); looks like an initrd
[ 0.379023] Freeing initrd memory: 25472K (cc220000 - cdb00000)
[ 0.379362] hw perfevents: enabled with armv7_cortex_a9 PMU driver, 7 counters available
[ 0.381155] futex hash table entries: 512 (order: 3, 32768 bytes)
[ 0.392944] workingset: timestamp_bits=28 max_order=16 bucket_order=0
[ 0.403787] jffs2: version 2.2. (NAND) (SUMMARY) © 2001-2006 Red Hat, Inc.
[ 0.404919] io scheduler noop registered
[ 0.404935] io scheduler deadline registered
[ 0.404964] io scheduler cfq registered (default)
[ 0.406642] dma-pl330 f8003000.ps7-dma: Loaded driver for PL330 DMAC-241330
[ 0.406657] dma-pl330 f8003000.ps7-dma: DBUFF-128x8bytes Num_Chans-8 Num_Peri-4 Num_Events-16
[ 0.407812] e0000000.serial: ttyPS0 at MMIO 0xe0000000 (irq = 158, base_baud = 6249999) is a xuartps
[ 0.911859] console [ttyPS0] enabled
[ 0.914732] xdevcfg f8007000.ps7-dev-cfg: ioremap 0xf8007000 to cf86e000
[ 0.920903] [drm] Initialized drm 1.1.0 20060810
[ 1.098468] brd: module loaded
[ 1.187334] loop: module loaded
[ 1.194181] CAN device driver interface
[ 1.197305] gpiod_set_value: invalid GPIO
[ 1.200946] libphy: MACB_mii_bus: probed
[ 1.281291] macb e000b000.ethernet eth0: Cadence GEM rev 0x00020118 at 0xe000b000 irq 31 (00:0a:35:00:00:00)
[ 1.289732] Generic PHY e000b000.etherne:00: attached PHY driver [Generic PHY] (mii_bus:phy_addr=e000b000.etherne:00, irq=-1)
[ 1.300026] e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k
[ 1.304565] e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
[ 1.310444] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.316063] ehci-pci: EHCI PCI platform driver
[ 1.319369] usbcore: registered new interface driver usb-storage
[ 1.325918] mousedev: PS/2 mouse device common for all mice
[ 1.341297] i2c /dev entries driver
[ 1.346368] Xilinx Zynq CpuIdle Driver started
[ 1.350704] sdhci: Secure Digital Host Controller Interface driver
[ 1.355601] sdhci: Copyright(c) Pierre Ossman
[ 1.358579] sdhci-pltfm: SDHCI platform and OF driver helper
[ 1.402359] mmc0: SDHCI controller on e0100000.ps7-sdio [e0100000.ps7-sdio] using ADMA
[ 1.409263] ledtrig-cpu: registered to indicate activity on CPUs
[ 1.414535] usbcore: registered new interface driver usbhid
[ 1.418717] usbhid: USB HID core driver
[ 1.422610] nand: device found, Manufacturer ID: 0xc2, Chip ID: 0xda
[ 1.427572] nand: Macronix MX30LF2GE8AB
[ 1.430092] nand: 256 MiB, SLC, erase size: 128 KiB, page size: 2048, OOB size: 64
[ 1.436923] Bad block table found at page 131008, version 0x01
[ 1.441860] Bad block table found at page 130944, version 0x01
[ 1.446557] nand_read_bbt: bad block at 0x00000ff60000
[ 1.450305] nand_read_bbt: bad block at 0x00000ff80000
[ 1.454164] nand_read_bbt: bad block at 0x00000ffa0000
[ 1.457943] nand_read_bbt: bad block at 0x00000ffc0000
[ 1.461898] 6 ofpart partitions found on MTD device pl35x-nand
[ 1.466337] Creating 6 MTD partitions on "pl35x-nand":
[ 1.470161] 0x000000000000-0x000002800000 : "BOOT.bin-env-dts-kernel"
[ 1.486846] 0x000002800000-0x000004800000 : "ramfs"
[ 1.501957] 0x000004800000-0x000005000000 : "configs"
[ 1.516990] 0x000005000000-0x000006000000 : "reserve"
[ 1.532168] 0x000006000000-0x000008000000 : "ramfs-bak"
[ 1.547555] 0x000008000000-0x000010000000 : "reserve1"
[ 1.566555] NET: Registered protocol family 10
[ 1.581152] sit: IPv6 over IPv4 tunneling driver
[ 1.585473] NET: Registered protocol family 17
[ 1.588546] can: controller area network core (rev 20120528 abi 9)
[ 1.593602] NET: Registered protocol family 29
[ 1.596668] can: raw protocol (rev 20120528)
[ 1.599611] can: broadcast manager protocol (rev 20120528 t)
[ 1.604009] can: netlink gateway (rev 20130117) max_hops=1
[ 1.608384] zynq_pm_ioremap: no compatible node found for 'xlnx,zynq-ddrc-a05'
[ 1.614356] zynq_pm_late_init: Unable to map DDRC IO memory.
[ 1.618698] Registering SWP/SWPB emulation handler
[ 1.624068] hctosys: unable to open rtc device (rtc0)
[ 1.628005] ALSA device list:
[ 1.629581] No soundcards found.
[ 1.632378] RAMDISK: gzip image found at block 0
[ 4.367334] EXT4-fs (ram0): couldn't mount as ext3 due to feature incompatibilities
[ 4.384521] EXT4-fs (ram0): warning: mounting unchecked fs, running e2fsck is recommended
[ 4.391659] EXT4-fs (ram0): mounted filesystem without journal. Opts: (null)
[ 4.397348] VFS: Mounted root (ext4 filesystem) on device 1:0.
[ 4.402320] devtmpfs: mounted
[ 4.405106] Freeing unused kernel memory: 1024K (c0a00000 - c0b00000)
[ 4.599508] EXT4-fs (ram0): re-mounted. Opts: block_validity,delalloc,barrier,user_xattr
[ 4.626618] random: dd urandom read with 0 bits of entropy available
[ 4.675908] ubi0: attaching mtd2
[ 4.692672] ubi0: scanning is finished
[ 4.701422] ubi0: attached mtd2 (name "configs", size 8 MiB)
[ 4.705698] ubi0: PEB size: 131072 bytes (128 KiB), LEB size: 129024 bytes
[ 4.711578] ubi0: min./max. I/O unit sizes: 2048/2048, sub-page size 512
[ 4.716894] ubi0: VID header offset: 512 (aligned 512), data offset: 2048
[ 4.722410] ubi0: good PEBs: 64, bad PEBs: 0, corrupted PEBs: 0
[ 4.726962] ubi0: user volume: 1, internal volumes: 1, max. volumes count: 128
[ 4.732906] ubi0: max/mean erase counter: 13/6, WL threshold: 4096, image sequence number: 460565467
[ 4.740677] ubi0: available PEBs: 0, total reserved PEBs: 64, PEBs reserved for bad PEB handling: 40
[ 4.748557] ubi0: background thread "ubi_bgt0d" started, PID 708
[ 4.766353] UBIFS (ubi0:0): background thread "ubifs_bgt0_0" started, PID 711
[ 4.798399] UBIFS (ubi0:0): recovery needed
[ 4.885830] UBIFS (ubi0:0): recovery completed
[ 4.888890] UBIFS (ubi0:0): UBIFS: mounted UBI device 0, volume 0, name "configs"
[ 4.895080] UBIFS (ubi0:0): LEB size: 129024 bytes (126 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
[ 4.903662] UBIFS (ubi0:0): FS size: 1419264 bytes (1 MiB, 11 LEBs), journal size 903169 bytes (0 MiB, 5 LEBs)
[ 4.912337] UBIFS (ubi0:0): reserved for root: 67035 bytes (65 KiB)
[ 4.917276] UBIFS (ubi0:0): media format: w4/r0 (latest is w4/r0), UUID D4278A0E-5E09-4986-8CC2-F995CD7D0A3E, small LPT model
[ 4.950388] ubi1: attaching mtd5
[ 5.190572] ubi1: scanning is finished
[ 5.200490] ubi1: attached mtd5 (name "reserve1", size 128 MiB)
[ 5.205175] ubi1: PEB size: 131072 bytes (128 KiB), LEB size: 129024 bytes
[ 5.210664] ubi1: min./max. I/O unit sizes: 2048/2048, sub-page size 512
[ 5.216094] ubi1: VID header offset: 512 (aligned 512), data offset: 2048
[ 5.221551] ubi1: good PEBs: 1019, bad PEBs: 5, corrupted PEBs: 0
[ 5.226288] ubi1: user volume: 1, internal volumes: 1, max. volumes count: 128
[ 5.232227] ubi1: max/mean erase counter: 8204/5729, WL threshold: 4096, image sequence number: 1857823607
[ 5.240524] ubi1: available PEBs: 0, total reserved PEBs: 1019, PEBs reserved for bad PEB handling: 35
[ 5.248554] ubi1: background thread "ubi_bgt1d" started, PID 720
[ 5.266433] UBIFS (ubi1:0): background thread "ubifs_bgt1_0" started, PID 723
[ 5.298928] UBIFS (ubi1:0): recovery needed
[ 5.436443] UBIFS (ubi1:0): recovery completed
[ 5.439506] UBIFS (ubi1:0): UBIFS: mounted UBI device 1, volume 0, name "reserve1"
[ 5.445810] UBIFS (ubi1:0): LEB size: 129024 bytes (126 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
[ 5.454386] UBIFS (ubi1:0): FS size: 125024256 bytes (119 MiB, 969 LEBs), journal size 6322176 bytes (6 MiB, 49 LEBs)
[ 5.463669] UBIFS (ubi1:0): reserved for root: 4952683 bytes (4836 KiB)
[ 5.468934] UBIFS (ubi1:0): media format: w4/r0 (latest is w4/r0), UUID B08F051B-2357-4CFE-957E-608EF71E3E17, small LPT model
[ 6.224276] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 6.263206] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 6.281449] macb e000b000.ethernet eth0: unable to generate target frequency: 25000000 Hz
[ 6.288249] macb e000b000.ethernet eth0: link up (100/Full)
[ 6.303896] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 21.428182] In axi fpga driver!
[ 21.430139] request_mem_region OK!
[ 21.434742] AXI fpga dev virtual address is 0xcfb40000
[ 21.438486] *base_vir_addr = 0xb023
[ 21.451411] In fpga mem driver!
[ 21.453471] request_mem_region OK!
[ 21.455680] fpga mem virtual address is 0xd2000000
[ 122.925959] random: nonblocking pool is initialized
2022-01-08 14:28:01 driver/driver-btm-api.c:278:init_freq_mode: This is scan-user version
2022-01-08 14:28:01 driver/driver-btm-api.c:1990:bitmain_soc_init: opt_multi_version = 1
2022-01-08 14:28:01 driver/driver-btm-api.c:1991:bitmain_soc_init: opt_bitmain_ab = 1
2022-01-08 14:28:01 driver/driver-btm-api.c:1992:bitmain_soc_init: opt_bitmain_work_mode = 0
2022-01-08 14:28:01 driver/driver-btm-api.c:1993:bitmain_soc_init: Miner compile time: Fri Apr 3 15:42:04 UTC 2020 type: Antminer T17E Hiveon
2022-01-08 14:28:01 driver/driver-btm-api.c:1995:bitmain_soc_init: commit version: 3f36039 2020-04-01 16:04:28, build by: user 2020-04-01 19:40:06
2022-01-08 14:28:01 driver/driver-btm-api.c:1636:show_sn: no SN got, please write SN to /nvdata/sn
2022-01-08 14:28:01 driver/fan.c:211:front_fan_power_on: Note: front fan is power on!
2022-01-08 14:28:01 driver/fan.c:217:rear_fan_power_on: Note: rear fan is power on!
2022-01-08 14:28:01 driver/driver-btm-api.c:1690:miner_device_init: Detect 256MB control board of XILINX
2022-01-08 14:28:01 driver/driver-btm-api.c:1664:init_fan_parameter: fan_eft : 0 fan_pwm : 0
2022-01-08 14:28:07 driver/driver-btm-api.c:1315:init_miner_version: miner ID : 8052b42e57408814
2022-01-08 14:28:07 driver/driver-btm-api.c:1320:init_miner_version: FPGA Version = 0xB023
2022-01-08 14:28:12 driver/thread.c:1671:create_read_nonce_reg_thread: create thread
2022-01-08 14:28:12 driver/driver-btm-api.c:1371:bitmain_board_init: product_id[0] = 1
2022-01-08 14:28:12 driver/driver-btm-api.c:1371:bitmain_board_init: product_id[1] = 1
2022-01-08 14:28:12 driver/driver-btm-api.c:1371:bitmain_board_init: product_id[2] = 1
2022-01-08 14:28:12 driver/driver-btm-api.c:1392:bitmain_board_init: project:0
2022-01-08 14:28:12 driver/driver-btm-api.c:1450:bitmain_board_init: Project type: Antminer T17E
2022-01-08 14:28:12 driver/driver-btm-api.c:1017:dump_pcb_bom_version: Chain [0] PCB Version: 0x010a
2022-01-08 14:28:12 driver/driver-btm-api.c:1018:dump_pcb_bom_version: Chain [0] BOM Version: 0x0100
2022-01-08 14:28:12 driver/driver-btm-api.c:1017:dump_pcb_bom_version: Chain [1] PCB Version: 0x010a
2022-01-08 14:28:12 driver/driver-btm-api.c:1018:dump_pcb_bom_version: Chain [1] BOM Version: 0x0100
2022-01-08 14:28:12 driver/driver-btm-api.c:1017:dump_pcb_bom_version: Chain [2] PCB Version: 0x010a
2022-01-08 14:28:12 driver/driver-btm-api.c:1018:dump_pcb_bom_version: Chain [2] BOM Version: 0x0100
2022-01-08 14:28:14 driver/driver-btm-api.c:1489:bitmain_board_init: Fan check passed.
2022-01-08 14:28:15 driver/board.c:31:jump_and_app_check_restore_pic: chain[0] PIC jump to app
2022-01-08 14:28:19 driver/board.c:34:jump_and_app_check_restore_pic: Check chain[0] PIC fw version=0x88
2022-01-08 14:28:20 driver/board.c:31:jump_and_app_check_restore_pic: chain[1] PIC jump to app
2022-01-08 14:28:24 driver/board.c:34:jump_and_app_check_restore_pic: Check chain[1] PIC fw version=0x88
2022-01-08 14:28:25 driver/board.c:31:jump_and_app_check_restore_pic: chain[2] PIC jump to app
2022-01-08 14:28:29 driver/board.c:34:jump_and_app_check_restore_pic: Check chain[2] PIC fw version=0x88
2022-01-08 14:28:29 driver/thread.c:1666:create_pic_heart_beat_thread: create thread
2022-01-08 14:28:29 driver/power_api.c:191:power_init: power init ... 
2022-01-08 14:28:30 driver/power_api.c:265:power_init: highest_voltage = 20.000000
2022-01-08 14:28:30 driver/power_api.c:266:power_init: working_voltage = 18.000000
2022-01-08 14:28:30 driver/power_api.c:267:power_init: higher_voltage = 18.500000
2022-01-08 14:28:30 driver/power_api.c:270:power_init: check_asic_voltage = 18.000000
2022-01-08 14:28:30 driver/driver-btm-api.c:1500:bitmain_board_init: Enter 30s sleep to make sure power release finish.
2022-01-08 14:29:02 driver/power_api.c:461:set_to_check_asic_voltage: setting to voltage: 18.00 ...
2022-01-08 14:29:04 driver/power_api.c:571:check_voltage_multi: retry time: 0
2022-01-08 14:29:06 driver/power_api.c:539:_get_avg_voltage: average voltage = 18.184909 
2022-01-08 14:29:06 driver/power_api.c:557:check_voltage: target_vol = 18.00, actural_vol = 18.18, check voltage passed.
2022-01-08 14:29:06 driver/uart.c:49:set_baud: set UART baud to 115200
2022-01-08 14:29:12 driver/driver-btm-api.c:1173:check_asic_number_with_power_on: Chain[0]: find 78 asic, times 0
2022-01-08 14:29:17 driver/driver-btm-api.c:1173:check_asic_number_with_power_on: Chain[1]: find 78 asic, times 0
2022-01-08 14:29:23 driver/driver-btm-api.c:1173:check_asic_number_with_power_on: Chain[2]: find 78 asic, times 0
2022-01-08 14:29:23 driver/power_api.c:779:set_to_highest_voltage_by_steps: Set to voltage 20.00, step by step.
2022-01-08 14:29:28 driver/power_api.c:571:check_voltage_multi: retry time: 0
2022-01-08 14:29:30 driver/power_api.c:539:_get_avg_voltage: average voltage = 20.107124 
2022-01-08 14:29:30 driver/power_api.c:557:check_voltage: target_vol = 20.00, actural_vol = 20.11, check voltage passed.
2022-01-08 14:29:38 driver/driver-hash-chip.c:100:set_uart_relay: set uart relay to 0x330003
2022-01-08 14:29:38 driver/driver-hash-chip.c:292:set_clock_delay_control: core_data = 0x64
2022-01-08 14:29:38 chain 0 domain 0: d0 0.417, d1 0.417, d2 0.416, d3 0.249, sum = 1.499634
2022-01-08 14:29:38 chain 0 domain 1: d0 0.380, d1 0.382, d2 0.366, d3 0.369, sum = 1.498169
2022-01-08 14:29:38 chain 0 domain 2: d0 0.393, d1 0.399, d2 0.388, d3 0.320, sum = 1.499634
2022-01-08 14:29:38 chain 0 domain 3: d0 0.390, d1 0.386, d2 0.390, d3 0.334, sum = 1.499634
2022-01-08 14:29:38 chain 0 domain 4: d0 0.401, d1 0.328, d2 0.371, d3 0.359, sum = 1.458984
2022-01-08 14:29:38 chain 0 domain 5: d0 0.405, d1 0.396, d2 0.348, d3 0.346, sum = 1.494141
2022-01-08 14:29:38 chain 0 domain 6: d0 0.389, d1 0.390, d2 0.378, d3 0.342, sum = 1.499634
2022-01-08 14:29:38 chain 0 domain 7: d0 0.388, d1 0.382, d2 0.381, d3 0.348, sum = 1.498901
2022-01-08 14:29:38 chain 0 domain 8: d0 0.374, d1 0.374, d2 0.375, d3 0.369, sum = 1.491577
2022-01-08 14:29:38 chain 0 domain 9: d0 0.387, d1 0.389, d2 0.384, d3 0.340, sum = 1.499634
2022-01-08 14:29:39 chain 0 domain 10: d0 0.000, d1 0.000, d2 0.000, d3 0.000, sum = 0.000000
2022-01-08 14:29:40 chain 0 domain 11: d0 0.000, d1 0.000, d2 0.000, d3 0.000, sum = 0.000000
2022-01-08 14:29:41 chain 0 domain 12: d0 0.000, d1 0.000, d2 0.000, d3 0.000, sum = 0.000000
2022-01-08 14:29:41 chain 1 domain 0: d0 0.397, d1 0.406, d2 0.405, d3 0.292, sum = 1.499634
2022-01-08 14:29:41 chain 1 domain 1: d0 0.415, d1 0.413, d2 0.409, d3 0.262, sum = 1.499634
2022-01-08 14:29:41 chain 1 domain 2: d0 0.383, d1 0.381, d2 0.382, d3 0.353, sum = 1.499634
2022-01-08 14:29:41 chain 1 domain 3: d0 0.368, d1 0.370, d2 0.370, d3 0.372, sum = 1.479858
2022-01-08 14:29:41 chain 1 domain 4: d0 0.386, d1 0.392, d2 0.394, d3 0.327, sum = 1.499634
2022-01-08 14:29:41 chain 1 domain 5: d0 0.386, d1 0.382, d2 0.377, d3 0.350, sum = 1.495972
2022-01-08 14:29:41 chain 1 domain 6: d0 0.389, d1 0.385, d2 0.383, d3 0.343, sum = 1.499634
2022-01-08 14:29:41 chain 1 domain 7: d0 0.386, d1 0.386, d2 0.390, d3 0.338, sum = 1.499634
2022-01-08 14:29:41 chain 1 domain 8: d0 0.379, d1 0.382, d2 0.377, d3 0.358, sum = 1.496338
2022-01-08 14:29:41 chain 1 domain 9: d0 0.411, d1 0.406, d2 0.396, d3 0.286, sum = 1.499634
2022-01-08 14:29:41 chain 1 domain 10: d0 0.436, d1 0.316, d2 0.349, d3 0.379, sum = 1.480591
2022-01-08 14:29:41 chain 1 domain 11: d0 0.388, d1 0.382, d2 0.379, d3 0.350, sum = 1.498169
2022-01-08 14:29:41 chain 1 domain 12: d0 0.366, d1 0.368, d2 0.364, d3 0.357, sum = 1.454590
2022-01-08 14:29:41 chain 2 domain 0: d0 0.380, d1 0.382, d2 0.361, d3 0.374, sum = 1.497070
2022-01-08 14:29:41 chain 2 domain 1: d0 0.356, d1 0.337, d2 0.354, d3 0.328, sum = 1.375488
2022-01-08 14:29:41 chain 2 domain 2: d0 0.392, d1 0.392, d2 0.388, d3 0.328, sum = 1.499634
2022-01-08 14:29:41 chain 2 domain 3: d0 0.406, d1 0.401, d2 0.400, d3 0.293, sum = 1.499634
2022-01-08 14:29:41 chain 2 domain 4: d0 0.390, d1 0.392, d2 0.401, d3 0.316, sum = 1.499634
2022-01-08 14:29:41 chain 2 domain 5: d0 0.384, d1 0.388, d2 0.388, d3 0.339, sum = 1.499634
2022-01-08 14:29:41 chain 2 domain 6: d0 0.379, d1 0.383, d2 0.387, d3 0.349, sum = 1.499634
2022-01-08 14:29:41 chain 2 domain 7: d0 0.398, d1 0.393, d2 0.394, d3 0.314, sum = 1.499634
2022-01-08 14:29:41 chain 2 domain 8: d0 0.392, d1 0.410, d2 0.435, d3 0.262, sum = 1.499634
2022-01-08 14:29:41 chain 2 domain 9: d0 0.379, d1 0.378, d2 0.378, d3 0.359, sum = 1.494507
2022-01-08 14:29:41 chain 2 domain 10: d0 0.362, d1 0.366, d2 0.368, d3 0.374, sum = 1.469604
2022-01-08 14:29:41 chain 2 domain 11: d0 0.386, d1 0.385, d2 0.388, d3 0.340, sum = 1.499634
2022-01-08 14:29:41 chain 2 domain 12: d0 0.369, d1 0.335, d2 1572864.000, d3 0.003, sum = 0.698730
2022-01-08 14:29:41 driver/driver-hash-chip.c:119:set_ldo_ctrl: Set LDO to 0x2000203
2022-01-08 14:29:41 voltage[0] = 1840
2022-01-08 14:29:41 voltage[1] = 1840
2022-01-08 14:29:41 voltage[2] = 1840
2022-01-08 14:29:41 Highest voltage is 20.00
2022-01-08 14:29:41 driver/power_api.c:279:set_working_voltage: working_voltage = 18.400000
2022-01-08 14:29:49 driver/temperature.c:240:is_temp_sensor_type_correct: Wrong temp sensor (98) type, chain = 0, sensor = 65, type = 0x0, retry.
2022-01-08 14:29:55 driver/temperature.c:240:is_temp_sensor_type_correct: Wrong temp sensor (98) type, chain = 0, sensor = 65, type = 0x0, retry.
2022-01-08 14:30:02 driver/temperature.c:240:is_temp_sensor_type_correct: Wrong temp sensor (98) type, chain = 0, sensor = 65, type = 0x0, retry.
2022-01-08 14:30:08 driver/temperature.c:240:is_temp_sensor_type_correct: Wrong temp sensor (98) type, chain = 0, sensor = 65, type = 0x0, retry.
2022-01-08 14:30:08 Error: 300
2022-01-08 14:30:08 driver/driver-btm-api.c:204:set_miner_status: ERROR_TEMP_LOST
2022-01-08 14:30:11 driver/driver-btm-api.c:717:killall_hashboard: ****power off hashboard****
2022-01-08 14:30:11 driver/driver-btm-api.c:157:stop_mining: stop mining: Can't get temperature sensor type!
2022-01-08 14:30:11 driver/thread.c:1732:cancel_read_nonce_reg_thread: cancel thread