S19J Pro 104th Hashboard 1 not working
I have been using my s19j pro 104th for a few months without a problem. Last night the Hashboard 1 stopped working. The chip state is all green and if I reset the miner it will work for about 10 minutes before dropping again. I tested with another PSU and had the same result. The miner log is pasted below.
Antminer S19j Pro Algorithm SHA256dOnline
Locate Miner Refresh Timer 2022-01-05 14:29:17 English
Current LogHistory Log
[ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 3.8.13+ (jenkins@nomd-nomd-fwc-bj) (gcc version 4.9.4 (Linaro GCC 4.9-2017.01) ) #28 SMP Tue Jun 22 17:32:38 CST 2021 [ 0.000000] CPU: ARMv7 Processor [413fc082] revision 2 (ARMv7), cr=50c5387d [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache [ 0.000000] Machine: Generic AM33XX (Flattened Device Tree), model: TI AM335x BeagleBone [ 0.000000] Memory policy: ECC disabled, Data cache writeback [ 0.000000] On node 0 totalpages: 65280 [ 0.000000] free_area_init_node: node 0, pgdat c05d9000, node_mem_map c0631000 [ 0.000000] Normal zone: 512 pages used for memmap [ 0.000000] Normal zone: 0 pages reserved [ 0.000000] Normal zone: 64768 pages, LIFO batch:15 [ 0.000000] AM335X ES1.0 (neon ) [ 0.000000] PERCPU: Embedded 8 pages/cpu @c083e000 s9856 r8192 d14720 u32768 [ 0.000000] pcpu-alloc: s9856 r8192 d14720 u32768 alloc=8*4096 [ 0.000000] pcpu-alloc: [0] 0 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 64768 [ 0.000000] Kernel command line: console=ttyO0,115200n8 init=/sbin/init [ 0.000000] PID hash table entries: 1024 (order: 0, 4096 bytes) [ 0.000000] Dentry cache hash table entries: 32768 (order: 5, 131072 bytes) [ 0.000000] Inode-cache hash table entries: 16384 (order: 4, 65536 bytes) [ 0.000000] __ex_table already sorted, skipping sort [ 0.000000] allocated 524288 bytes of page_cgroup [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups [ 0.000000] Memory: 255MB = 255MB total [ 0.000000] Memory: 245448k/245448k available, 16696k reserved, 0K highmem [ 0.000000] Virtual kernel memory layout: [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB) [ 0.000000] fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB) [ 0.000000] vmalloc : 0xd0800000 - 0xff000000 ( 744 MB) [ 0.000000] lowmem : 0xc0000000 - 0xd0000000 ( 256 MB) [ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB) [ 0.000000] modules : 0xbf800000 - 0xbfe00000 ( 6 MB) [ 0.000000] .text : 0xc0008000 - 0xc053f674 (5342 kB) [ 0.000000] .init : 0xc0540000 - 0xc0571680 ( 198 kB) [ 0.000000] .data : 0xc0572000 - 0xc05d9ee0 ( 416 kB) [ 0.000000] .bss : 0xc05d9ee0 - 0xc0630448 ( 346 kB) [ 0.000000] Hierarchical RCU implementation. [ 0.000000] RCU restricting CPUs from NR_CPUS=4 to nr_cpu_ids=1. [ 0.000000] NR_IRQS:16 nr_irqs:16 16 [ 0.000000] IRQ: Found an INTC at 0xfa200000 (revision 5.0) with 128 interrupts [ 0.000000] Total of 128 interrupts on 1 active controller [ 0.000000] OMAP clockevent source: GPTIMER1 at 24000000 Hz [ 0.000000] sched_clock: 32 bits at 24MHz, resolution 41ns, wraps every 178956ms [ 0.000000] OMAP clocksource: GPTIMER2 at 24000000 Hz [ 0.000000] Console: colour dummy device 80x30 [ 0.000351] Calibrating delay loop... 545.07 BogoMIPS (lpj=531968) [ 0.015448] pid_max: default: 32768 minimum: 301 [ 0.015670] Security Framework initialized [ 0.015761] Mount-cache hash table entries: 512 [ 0.024268] Initializing cgroup subsys cpuacct [ 0.024301] Initializing cgroup subsys memory [ 0.024365] Initializing cgroup subsys blkio [ 0.024496] CPU: Testing write buffer coherency: ok [ 0.025007] CPU0: thread -1, cpu 0, socket -1, mpidr 0 [ 0.025081] Setting up static identity map for 0x8030a500 - 0x8030a54c [ 0.026446] Brought up 1 CPUs [ 0.026468] SMP: Total of 1 processors activated (545.07 BogoMIPS). [ 0.027732] devtmpfs: initialized [ 0.091400] pinctrl core: initialized pinctrl subsystem [ 0.091653] rstctl core: initialized rstctl subsystem [ 0.092116] regulator-dummy: no parameters [ 0.092615] NET: Registered protocol family 16 [ 0.093276] DMA: preallocated 256 KiB pool for atomic coherent allocations [ 0.102683] pinctrl-single 44e10800.pinmux: prop pinctrl-0 index 0 invalid phandle [ 0.102858] pinctrl-single 44e10800.pinmux: 142 pins at pa f9e10800 size 568 [ 0.103908] platform 49000000.edma: alias fck already exists [ 0.103938] platform 49000000.edma: alias fck already exists [ 0.103964] platform 49000000.edma: alias fck already exists [ 0.105076] gpiochip_add: registered GPIOs 0 to 31 on device: gpio [ 0.105255] OMAP GPIO hardware version 0.1 [ 0.106634] gpiochip_add: registered GPIOs 32 to 63 on device: gpio [ 0.107932] gpiochip_add: registered GPIOs 64 to 95 on device: gpio [ 0.109386] gpiochip_add: registered GPIOs 96 to 127 on device: gpio [ 0.109906] of_get_named_gpio_flags exited with status 52 [ 0.109936] gpio-rctrl rstctl.3: loaded OK [ 0.114804] omap-gpmc 50000000.gpmc: GPMC revision 6.0 [ 0.118052] hw-breakpoint: debug architecture 0x4 unsupported. [ 0.119947] cpsw.0: No hwaddr in dt. Using 94:e3:6d:dd:be:a0 from efuse [ 0.128830] bio: create slab <bio-0> at 0 [ 0.140253] edma-dma-engine edma-dma-engine.0: TI EDMA DMA engine driver [ 0.140540] of_get_named_gpio_flags: can't parse gpios property [ 0.140762] vmmcsd_fixed: 3300 mV [ 0.143872] SCSI subsystem initialized [ 0.145100] omap_i2c 4819c000.i2c: bus 0 rev0.11 at 100 kHz [ 0.145133] omap_i2c 4819c000.i2c: unable to select pin group [ 0.145365] pps_core: LinuxPPS API ver. 1 registered [ 0.145381] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it> [ 0.146975] Switching to clocksource gp_timer [ 0.164175] NET: Registered protocol family 2 [ 0.165236] TCP established hash table entries: 2048 (order: 2, 16384 bytes) [ 0.165324] TCP bind hash table entries: 2048 (order: 3, 40960 bytes) [ 0.165417] TCP: Hash tables configured (established 2048 bind 2048) [ 0.165510] TCP: reno registered [ 0.165535] UDP hash table entries: 256 (order: 1, 12288 bytes) [ 0.165579] UDP-Lite hash table entries: 256 (order: 1, 12288 bytes) [ 0.165988] NET: Registered protocol family 1 [ 0.166555] RPC: Registered named UNIX socket transport module. [ 0.166629] RPC: Registered udp transport module. [ 0.166645] RPC: Registered tcp transport module. [ 0.166658] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.167036] Trying to unpack rootfs image as initramfs... [ 1.055577] Freeing initrd memory: 6448K [ 1.056203] CPU PMU: probing PMU on CPU 0 [ 1.056234] hw perfevents: enabled with ARMv7 Cortex-A8 PMU driver, 5 counters available [ 1.056760] omap2_mbox_probe: platform not supported [ 1.060519] VFS: Disk quotas dquot_6.5.2 [ 1.060767] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 1.062167] NFS: Registering the id_resolver key type [ 1.062256] Key type id_resolver registered [ 1.062273] Key type id_legacy registered [ 1.062338] jffs2: version 2.2. (NAND) (SUMMARY) © 2001-2006 Red Hat, Inc. [ 1.062777] msgmni has been set to 491 [ 1.065610] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 250) [ 1.065636] io scheduler noop registered [ 1.065652] io scheduler deadline registered [ 1.065709] io scheduler cfq registered (default) [ 1.069417] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 1.071669] omap_uart 44e09000.serial: did not get pins for uart0 error: -19 [ 1.071693] of_get_named_gpio_flags: can't parse gpios property [ 1.071968] 44e09000.serial: ttyO0 at MMIO 0x44e09000 (irq = 88) is a OMAP UART0 [ 1.692943] console [ttyO0] enabled [ 1.697205] of_get_named_gpio_flags: can't parse gpios property [ 1.697456] 48022000.serial: ttyO1 at MMIO 0x48022000 (irq = 89) is a OMAP UART1 [ 1.705910] of_get_named_gpio_flags: can't parse gpios property [ 1.706130] 48024000.serial: ttyO2 at MMIO 0x48024000 (irq = 90) is a OMAP UART2 [ 1.714517] of_get_named_gpio_flags: can't parse gpios property [ 1.714733] 481a8000.serial: ttyO4 at MMIO 0x481a8000 (irq = 61) is a OMAP UART4 [ 1.723129] of_get_named_gpio_flags: can't parse gpios property [ 1.723395] 481aa000.serial: ttyO5 at MMIO 0x481aa000 (irq = 62) is a OMAP UART5 [ 1.745287] brd: module loaded [ 1.755543] loop: module loaded [ 1.759579] bone-capemgr bone_capemgr.8: Failed to find baseboard eeprom node [ 1.769663] ONFI param page 0 valid [ 1.773374] ONFI flash detected [ 1.776699] NAND device: Manufacturer ID: 0x2c, Chip ID: 0xf1 (Micron MT29F1G08ABAEAWP), 128MiB, page size: 2048, OOB size: 64 [ 1.788618] omap2-nand: detected x8 NAND flash [ 1.793284] nand: using OMAP_ECC_BCH8_CODE_HW ECC scheme [ 1.798869] omap2-nand: using custom ecc layout [ 1.803719] 12 ofpart partitions found on MTD device omap2-nand.0 [ 1.810119] Creating 12 MTD partitions on "omap2-nand.0": [ 1.815798] 0x000000000000-0x000000020000 : "spl" [ 1.822456] 0x000000020000-0x000000040000 : "spl_backup1" [ 1.829798] 0x000000040000-0x000000060000 : "spl_backup2" [ 1.837156] 0x000000060000-0x000000080000 : "spl_backup3" [ 1.844486] 0x000000080000-0x000000240000 : "u-boot" [ 1.852815] 0x000000240000-0x000000260000 : "bootenv" [ 1.859765] 0x000000260000-0x000000280000 : "fdt" [ 1.866405] 0x000000280000-0x000000780000 : "kernel" [ 1.877362] 0x000000800000-0x000001c00000 : "root" [ 1.901036] 0x000001c00000-0x000001e00000 : "config" [ 1.909478] 0x000001e00000-0x000002000000 : "sig" [ 1.917685] 0x000002000000-0x000008000000 : "nvdata" [ 2.006914] OneNAND driver initializing [ 2.013314] mousedev: PS/2 mouse device common for all mice [ 2.021041] omap_rtc 44e3e000.rtc: rtc core: registered 44e3e000.rtc as rtc0 [ 2.028824] i2c /dev entries driver [ 2.033133] pps_ldisc: PPS line discipline registered [ 2.038623] Driver for 1-wire Dallas network protocol. [ 2.045864] omap_wdt: OMAP Watchdog Timer Rev 0x01: initial timeout 60 sec [ 2.053470] cpuidle: using governor ladder [ 2.057794] cpuidle: using governor menu [ 2.062372] of_get_named_gpio_flags exited with status 6 [ 2.062389] of_get_named_gpio_flags: can't parse gpios property [ 2.062404] of_get_named_gpio_flags: can't parse gpios property [ 2.062439] omap_hsmmc mmc.4: of_parse_phandle_with_args of 'reset' failed [ 2.069665] omap_hsmmc mmc.4: Failed to get rstctl; not using any [ 2.076467] edma-dma-engine edma-dma-engine.0: allocated channel for 0:25 [ 2.083689] edma-dma-engine edma-dma-engine.0: allocated channel for 0:24 [ 2.091015] mmc.4 supply vmmc_aux not found, using dummy regulator [ 2.097970] omap_hsmmc mmc.4: pins are not configured from the driver [ 2.132036] of_get_named_gpio_flags exited with status -517 [ 2.132102] platform gpio-leds.7: Driver leds-gpio requests probe deferral [ 2.139910] ledtrig-cpu: registered to indicate activity on CPUs [ 2.146686] edma-dma-engine edma-dma-engine.0: allocated channel for 0:36 [ 2.153885] omap-sham 53100000.sham: hw accel on OMAP rev 4.3 [ 2.161934] omap-aes 53500000.aes: OMAP AES hw accel rev: 3.2 [ 2.168208] edma-dma-engine edma-dma-engine.0: allocated channel for 0:5 [ 2.175385] edma-dma-engine edma-dma-engine.0: allocated channel for 0:6 [ 2.183703] nf_conntrack version 0.5.0 (3935 buckets, 15740 max) [ 2.191183] ip_tables: (C) 2000-2006 Netfilter Core Team [ 2.196969] TCP: cubic registered [ 2.200511] Initializing XFRM netlink socket [ 2.205148] NET: Registered protocol family 10 [ 2.211250] ip6_tables: (C) 2000-2006 Netfilter Core Team [ 2.217203] NET: Registered protocol family 17 [ 2.221981] NET: Registered protocol family 15 [ 2.226823] Key type dns_resolver registered [ 2.231403] VFP support v0.3: implementor 41 architecture 3 part 30 variant c rev 3 [ 2.239482] ThumbEE CPU extension supported. [ 2.243999] Registering SWP/SWPB emulation handler [ 2.250093] registered taskstats version 1 [ 2.255872] of_get_named_gpio_flags exited with status -517 [ 2.255941] platform gpio-leds.7: Driver leds-gpio requests probe deferral [ 2.313145] davinci_mdio 4a101000.mdio: davinci mdio revision 1.6 [ 2.319560] davinci_mdio 4a101000.mdio: detected phy mask fffffffe [ 2.334339] libphy: 4a101000.mdio: probed [ 2.338688] davinci_mdio 4a101000.mdio: phy[0]: device 4a101000.mdio:00, driver SMSC LAN8710/LAN8720 [ 2.348765] of_get_named_gpio_flags exited with status -517 [ 2.348832] platform gpio-leds.7: Driver leds-gpio requests probe deferral [ 2.356314] Detected MACID = 94:e3:6d:dd:be:a0 [ 2.360995] cpsw 4a100000.ethernet: NAPI disabled [ 2.367957] omap_rtc 44e3e000.rtc: setting system clock to 2000-01-01 00:00:00 UTC (946684800) [ 2.377132] cpu0 supply cpu0 not found, using dummy regulator [ 2.383618] cpufreq_cpu0: failed to scale voltage up: -22 [ 2.389438] cpufreq_cpu0: failed to scale voltage up: -22 [ 2.403134] Freeing init memory: 196K [ 2.483665] devpts: called with bogus options [ 2.922138] jffs2: notice: (109) jffs2_build_xattr_subsystem: complete building xattr subsystem, 0 of xdatum (0 unchecked, 0 orphan) and 0 of xref (0 dead, 0 orphan) found. [ 5.198145] jffs2: notice: (115) jffs2_build_xattr_subsystem: complete building xattr subsystem, 0 of xdatum (0 unchecked, 0 orphan) and 0 of xref (0 dead, 0 orphan) found. [ 5.617287] net eth0: initializing cpsw version 1.12 (0) [ 5.625622] net eth0: phy found : id is : 0x7c0f1 [ 5.639131] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 6.480224] jffs2: notice: (116) check_node_data: wrong data CRC in data node at 0x053987b8: read 0xb1ccbee2, calculated 0xe50f0208. [ 9.770698] libphy: 4a101000.mdio:00 - Link is Up - 100/Full [ 9.776900] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 11.207753] register uart_trans chrdev success. [ 11.213162] tty port open success [/dev/ttyO1]! [ 11.218186] init sucess for tty struct (249:1) [/dev/ttyO1] [ 11.224571] tty port open success [/dev/ttyO2]! [ 11.229561] init sucess for tty struct (249:2) [/dev/ttyO2] [ 11.235915] tty port open success [/dev/ttyO4]! [ 11.240902] init sucess for tty struct (249:4) [/dev/ttyO4] [ 11.247323] tty port open success [/dev/ttyO5]! [ 11.252258] init sucess for tty struct (249:5) [/dev/ttyO5] [ 19.612150] uart trans dev open. [ 19.615872] uart_buf virt addr = 0xccd80000 [ 19.620430] uart_buf phys addr = 0x8cd80000 [ 19.624941] uart_buf pfn = 0x0008cd80 [ 19.630223] uart trans stop send work timer. [ 19.635183] uart trans set chain exist bits:0x7. [ 19.640256] uart trans set work queue count 768. [ 137.563241] uart set baud to: 4098 [ 137.567480] uart set baud to: 4098 [ 137.571374] uart set baud to: 4098 [ 176.696248] uart set baud to: 4109 [ 176.760399] uart set baud to: 4109 [ 176.824451] uart set baud to: 4109 [ 443.460796] uart trans start send work timer. [ 585.978103] jffs2: warning: (1296) jffs2_sum_write_data: Not enough space for summary, padsize = -608 ===========================================Miner log=========================================== 2000-01-01 00:00:09 Miner compile time: Tue Jun 22 17:45:49 CST 2021 type: Antminer S19j Pro 2000-01-01 00:00:10 This is fix-freq version 2000-01-01 00:00:10 Miner compile time: Tue Jun 22 17:45:49 CST 2021 type: Antminer S19j Pro 2000-01-01 00:00:10 commit åversion: 93c0f7a 2021-06-22 17:54:06, build by: jenkins 2021-06-22 17:59:34 2000-01-01 00:00:10 opt_multi_version = 1 2000-01-01 00:00:10 opt_bitmain_ab = 1 2000-01-01 00:00:10 mid_auto_gen = 1 2000-01-01 00:00:10 opt_bitmain_work_mode = 0 2000-01-01 00:00:10 port 51 already exported 2000-01-01 00:00:10 port 49 already exported 2000-01-01 00:00:10 port 48 already exported 2000-01-01 00:00:10 port 60 already exported 2000-01-01 00:00:10 port 47 already exported 2000-01-01 00:00:10 port 27 already exported 2000-01-01 00:00:10 port 44 already exported 2000-01-01 00:00:10 port 22 already exported 2000-01-01 00:00:10 no board pluged in socket 44 2000-01-01 00:00:10 port 23 already exported 2000-01-01 00:00:10 port 45 already exported 2000-01-01 00:00:10 port 46 already exported 2000-01-01 00:00:10 port 26 already exported 2000-01-01 00:00:10 Note: front fan is power on! 2000-01-01 00:00:10 Note: rear fan is power on! 2000-01-01 00:00:10 start the http log. 2000-01-01 00:00:10 httpListenThread start ret=0 2000-01-01 00:00:10 start listen on 6060 ... 2000-01-01 00:00:10 load machine BHB42601 conf 2000-01-01 00:00:10 machine : BHB42601 2000-01-01 00:00:10 chain_num 4, chain_domain_num 42, chain_asic_num 126, domain_asic_num 3 2000-01-01 00:00:15 ==========================capability start========================== 2000-01-01 00:00:15 board num = 3 2000-01-01 00:00:15 board id = 0, chain num = 1 2000-01-01 00:00:15 chain id = 0 2000-01-01 00:00:15 board id = 1, chain num = 1 2000-01-01 00:00:15 chain id = 1 2000-01-01 00:00:15 board id = 2, chain num = 1 2000-01-01 00:00:15 chain id = 2 2000-01-01 00:00:15 ==========================capability end============================ 2000-01-01 00:00:15 chain num = 3 2000-01-01 00:00:16 load chain 0 eeprom data 2000-01-01 00:00:16 board_info_version = 4 2000-01-01 00:00:16 algorithm_and_key_version = 0x11 2000-01-01 00:00:16 board_sn = FXDZYN3BAJGBF04SD 2000-01-01 00:00:16 chip_die = ED 2000-01-01 00:00:16 chip_marking = J1C021AY07 2000-01-01 00:00:16 chip_bin = 1 2000-01-01 00:00:16 ft_version = F1V04B2C1 2000-01-01 00:00:16 pcb_version = 0x110 2000-01-01 00:00:16 bom_version = 0x20 2000-01-01 00:00:16 asic_sensor_type = 0x0 2000-01-01 00:00:16 asic_sensor_addr[0] = 0x0 2000-01-01 00:00:16 asic_sensor_addr[1] = 0x0 2000-01-01 00:00:16 asic_sensor_addr[2] = 0x0 2000-01-01 00:00:16 asic_sensor_addr[3] = 0x0 2000-01-01 00:00:16 pic_sensor_type = 0x8b 2000-01-01 00:00:16 pic_sensor_addr = 0xf 2000-01-01 00:00:16 chip_tech = AA 2000-01-01 00:00:16 board_name = BHB42601 2000-01-01 00:00:16 factory_job = FXDZ20210701006-ZB 2000-01-01 00:00:16 board_info_crc = 0xa 2000-01-01 00:00:16 voltage = 1380 2000-01-01 00:00:16 frequency = 545 2000-01-01 00:00:16 nonce_rate = 9999 2000-01-01 00:00:16 pcb_temp_in = 35 2000-01-01 00:00:16 pcb_temp_out = 36 2000-01-01 00:00:16 test_version = 1 2000-01-01 00:00:16 test_standard = 0 2000-01-01 00:00:16 param_info_crc = 0x17 2000-01-01 00:00:16 pt1_result = 1 2000-01-01 00:00:16 pt1_count = 2 2000-01-01 00:00:16 pt2_result = 1 2000-01-01 00:00:16 pt2_count = 1 2000-01-01 00:00:17 load chain 1 eeprom data 2000-01-01 00:00:17 board_info_version = 4 2000-01-01 00:00:17 algorithm_and_key_version = 0x11 2000-01-01 00:00:17 board_sn = FXDZYN3BAJGBF0268 2000-01-01 00:00:17 chip_die = ED 2000-01-01 00:00:17 chip_marking = J1CT21BJ28 2000-01-01 00:00:17 chip_bin = 1 2000-01-01 00:00:17 ft_version = F1V04B2C1 2000-01-01 00:00:17 pcb_version = 0x110 2000-01-01 00:00:17 bom_version = 0x20 2000-01-01 00:00:17 asic_sensor_type = 0x0 2000-01-01 00:00:17 asic_sensor_addr[0] = 0x0 2000-01-01 00:00:17 asic_sensor_addr[1] = 0x0 2000-01-01 00:00:17 asic_sensor_addr[2] = 0x0 2000-01-01 00:00:17 asic_sensor_addr[3] = 0x0 2000-01-01 00:00:17 pic_sensor_type = 0x8b 2000-01-01 00:00:17 pic_sensor_addr = 0xf 2000-01-01 00:00:17 chip_tech = AA 2000-01-01 00:00:17 board_name = BHB42601 2000-01-01 00:00:17 factory_job = FXDZ20210701006-ZB 2000-01-01 00:00:17 board_info_crc = 0x15 2000-01-01 00:00:17 voltage = 1380 2000-01-01 00:00:17 frequency = 545 2000-01-01 00:00:17 nonce_rate = 9999 2000-01-01 00:00:17 pcb_temp_in = 33 2000-01-01 00:00:17 pcb_temp_out = 34 2000-01-01 00:00:17 test_version = 1 2000-01-01 00:00:17 test_standard = 0 2000-01-01 00:00:17 param_info_crc = 0x19 2000-01-01 00:00:17 pt1_result = 1 2000-01-01 00:00:17 pt1_count = 1 2000-01-01 00:00:17 pt2_result = 1 2000-01-01 00:00:17 pt2_count = 1 2000-01-01 00:00:17 load chain 2 eeprom data 2000-01-01 00:00:17 board_info_version = 4 2000-01-01 00:00:17 algorithm_and_key_version = 0x11 2000-01-01 00:00:17 board_sn = FXDZYN3BAJGBF04HM 2000-01-01 00:00:17 chip_die = ED 2000-01-01 00:00:17 chip_marking = J1C021AY07 2000-01-01 00:00:17 chip_bin = 1 2000-01-01 00:00:17 ft_version = F1V04B2C1 2000-01-01 00:00:17 pcb_version = 0x110 2000-01-01 00:00:17 bom_version = 0x20 2000-01-01 00:00:17 asic_sensor_type = 0x0 2000-01-01 00:00:17 asic_sensor_addr[0] = 0x0 2000-01-01 00:00:17 asic_sensor_addr[1] = 0x0 2000-01-01 00:00:17 asic_sensor_addr[2] = 0x0 2000-01-01 00:00:17 asic_sensor_addr[3] = 0x0 2000-01-01 00:00:17 pic_sensor_type = 0x8b 2000-01-01 00:00:17 pic_sensor_addr = 0xf 2000-01-01 00:00:17 chip_tech = AA 2000-01-01 00:00:17 board_name = BHB42601 2000-01-01 00:00:17 factory_job = FXDZ20210701006-ZB 2000-01-01 00:00:17 board_info_crc = 0xa 2000-01-01 00:00:17 voltage = 1380 2000-01-01 00:00:17 frequency = 545 2000-01-01 00:00:17 nonce_rate = 9998 2000-01-01 00:00:17 pcb_temp_in = 32 2000-01-01 00:00:17 pcb_temp_out = 33 2000-01-01 00:00:17 test_version = 1 2000-01-01 00:00:17 test_standard = 0 2000-01-01 00:00:17 param_info_crc = 0x11 2000-01-01 00:00:17 pt1_result = 1 2000-01-01 00:00:17 pt1_count = 1 2000-01-01 00:00:17 pt2_result = 1 2000-01-01 00:00:17 pt2_count = 1 2000-01-01 00:00:17 fan_eft : 0 fan_pwm : 100 2000-01-01 00:00:17 create thread get_nonce_and_register_thread 2000-01-01 00:00:17 fixed working voltage = 1380 2000-01-01 00:00:17 Chain [0] PCB Version: 0x0110 2000-01-01 00:00:17 Chain [0] BOM Version: 0x0020 2000-01-01 00:00:17 Chain [1] PCB Version: 0x0110 2000-01-01 00:00:17 Chain [1] BOM Version: 0x0020 2000-01-01 00:00:17 Chain [2] PCB Version: 0x0110 2000-01-01 00:00:17 Chain [2] BOM Version: 0x0020 2000-01-01 00:00:17 Fan check passed. 2000-01-01 00:00:17 uart_trans addr:0xb6c1b000. 2000-01-01 00:00:18 chain[0] PIC jump to app 2022-01-05 19:04:42 Check chain[0] PIC fw version=0x89 2022-01-05 19:04:43 chain[1] PIC jump to app 2022-01-05 19:04:44 Check chain[1] PIC fw version=0x89 2022-01-05 19:04:46 chain[2] PIC jump to app 2022-01-05 19:04:47 Check chain[2] PIC fw version=0x89 2022-01-05 19:04:47 create thread pic_heart_beat_thread 2022-01-05 19:04:47 max sensor num = 4 2022-01-05 19:04:47 i2c_sim_init start 2022-01-05 19:04:47 temperature_monitor_thread start... 2022-01-05 19:04:47 i2c_sim_init end 2022-01-05 19:04:49 power open power_version = 0x71 2022-01-05 19:04:50 power type version: 0x0071 2022-01-05 19:04:50 Enter sleep to make sure power release finish. 2022-01-05 19:05:01 chain avg vol drop to 0.99 2022-01-05 19:06:32 Slept 101 seconds, diff = 5. 2022-01-05 19:06:33 set_voltage_by_steps to 1500. 2022-01-05 19:06:37 chain avg vol rise to 15.11 2022-01-05 19:06:38 start up min temp by 75a = 5 2022-01-05 19:06:48 Chain[0]: find 126 asic, times 0 2022-01-05 19:06:57 Chain[1]: find 126 asic, times 0 2022-01-05 19:07:07 Chain[2]: find 126 asic, times 0 2022-01-05 19:07:12 pulse_mode = 1, ccdly_sel = 0, pwth_sel = 1 2022-01-05 19:07:17 min freq in eeprom = 545 2022-01-05 19:07:17 fixed frequency is 545 2022-01-05 19:07:17 Bring up temperature is 6 2022-01-05 19:07:17 set UART baud to 3000000 2022-01-05 19:07:17 pulse_mode = 1, ccdly_sel = 0, pwth_sel = 1 2022-01-05 19:07:17 start do_core_reset 2022-01-05 19:07:36 end do_core_reset 2022-01-05 19:07:36 STATUS_INITED: soc init done! 2022-01-05 19:07:36 create thread check_miner_status_thread 2022-01-05 19:07:36 create thread check_system_work_thread 2022-01-05 19:07:39 start to init... 2022-01-05 19:07:39 set_voltage_by_steps to 1500. 2022-01-05 19:07:41 fixed step freq_start = 50, freq_end = 545, freq_step = 6.25 2022-01-05 19:07:41 chain = 0 set freq to 56.25 2022-01-05 19:07:41 chain = 1 set freq to 56.25 2022-01-05 19:07:41 chain = 2 set freq to 56.25 2022-01-05 19:07:44 chain = 0 set freq to 62.50 2022-01-05 19:07:44 chain = 1 set freq to 62.50 2022-01-05 19:07:44 chain = 2 set freq to 62.50 2022-01-05 19:07:47 chain = 0 set freq to 68.75 2022-01-05 19:07:47 chain = 1 set freq to 68.75 2022-01-05 19:07:47 chain = 2 set freq to 68.75 2022-01-05 19:07:50 chain = 0 set freq to 75.00 2022-01-05 19:07:50 chain = 1 set freq to 75.00 2022-01-05 19:07:50 chain = 2 set freq to 75.00 2022-01-05 19:07:53 chain = 0 set freq to 81.25 2022-01-05 19:07:53 chain = 1 set freq to 81.25 2022-01-05 19:07:53 chain = 2 set freq to 81.25 2022-01-05 19:07:56 chain = 0 set freq to 87.50 2022-01-05 19:07:56 chain = 1 set freq to 87.50 2022-01-05 19:07:56 chain = 2 set freq to 87.50 2022-01-05 19:07:59 chain = 0 set freq to 93.75 2022-01-05 19:07:59 chain = 1 set freq to 93.75 2022-01-05 19:07:59 chain = 2 set freq to 93.75 2022-01-05 19:08:02 chain = 0 set freq to 100.00 2022-01-05 19:08:02 chain = 1 set freq to 100.00 2022-01-05 19:08:02 chain = 2 set freq to 100.00 2022-01-05 19:08:05 chain = 0 set freq to 106.25 2022-01-05 19:08:05 chain = 1 set freq to 106.25 2022-01-05 19:08:05 chain = 2 set freq to 106.25 2022-01-05 19:08:08 chain = 0 set freq to 112.50 2022-01-05 19:08:08 chain = 1 set freq to 112.50 2022-01-05 19:08:08 chain = 2 set freq to 112.50 2022-01-05 19:08:11 chain = 0 set freq to 118.75 2022-01-05 19:08:11 chain = 1 set freq to 118.75 2022-01-05 19:08:11 chain = 2 set freq to 118.75 2022-01-05 19:08:14 chain = 0 set freq to 125.00 2022-01-05 19:08:14 chain = 1 set freq to 125.00 2022-01-05 19:08:14 chain = 2 set freq to 125.00 2022-01-05 19:08:17 chain = 0 set freq to 131.25 2022-01-05 19:08:17 chain = 1 set freq to 131.25 2022-01-05 19:08:17 chain = 2 set freq to 131.25 2022-01-05 19:08:20 chain = 0 set freq to 137.50 2022-01-05 19:08:20 chain = 1 set freq to 137.50 2022-01-05 19:08:20 chain = 2 set freq to 137.50 2022-01-05 19:08:23 chain = 0 set freq to 143.75 2022-01-05 19:08:23 chain = 1 set freq to 143.75 2022-01-05 19:08:23 chain = 2 set freq to 143.75 2022-01-05 19:08:26 chain = 0 set freq to 150.00 2022-01-05 19:08:26 chain = 1 set freq to 150.00 2022-01-05 19:08:26 chain = 2 set freq to 150.00 2022-01-05 19:08:29 chain = 0 set freq to 156.25 2022-01-05 19:08:29 chain = 1 set freq to 156.25 2022-01-05 19:08:29 chain = 2 set freq to 156.25 2022-01-05 19:08:32 chain = 0 set freq to 162.50 2022-01-05 19:08:32 chain = 1 set freq to 162.50 2022-01-05 19:08:32 chain = 2 set freq to 162.50 2022-01-05 19:08:35 chain = 0 set freq to 168.75 2022-01-05 19:08:35 chain = 1 set freq to 168.75 2022-01-05 19:08:35 chain = 2 set freq to 168.75 2022-01-05 19:08:38 chain = 0 set freq to 175.00 2022-01-05 19:08:38 chain = 1 set freq to 175.00 2022-01-05 19:08:38 chain = 2 set freq to 175.00 2022-01-05 19:08:41 chain = 0 set freq to 181.25 2022-01-05 19:08:41 chain = 1 set freq to 181.25 2022-01-05 19:08:41 chain = 2 set freq to 181.25 2022-01-05 19:08:44 chain = 0 set freq to 187.50 2022-01-05 19:08:44 chain = 1 set freq to 187.50 2022-01-05 19:08:44 chain = 2 set freq to 187.50 2022-01-05 19:08:47 chain = 0 set freq to 193.75 2022-01-05 19:08:47 chain = 1 set freq to 193.75 2022-01-05 19:08:47 chain = 2 set freq to 193.75 2022-01-05 19:08:50 chain = 0 set freq to 200.00 2022-01-05 19:08:50 chain = 1 set freq to 200.00 2022-01-05 19:08:50 chain = 2 set freq to 200.00 2022-01-05 19:08:53 chain = 0 set freq to 206.25 2022-01-05 19:08:53 chain = 1 set freq to 206.25 2022-01-05 19:08:53 chain = 2 set freq to 206.25 2022-01-05 19:08:56 chain = 0 set freq to 212.50 2022-01-05 19:08:56 chain = 1 set freq to 212.50 2022-01-05 19:08:56 chain = 2 set freq to 212.50 2022-01-05 19:08:59 chain = 0 set freq to 218.75 2022-01-05 19:08:59 chain = 1 set freq to 218.75 2022-01-05 19:08:59 chain = 2 set freq to 218.75 2022-01-05 19:09:02 chain = 0 set freq to 225.00 2022-01-05 19:09:02 chain = 1 set freq to 225.00 2022-01-05 19:09:02 chain = 2 set freq to 225.00 2022-01-05 19:09:05 chain = 0 set freq to 231.25 2022-01-05 19:09:05 chain = 1 set freq to 231.25 2022-01-05 19:09:05 chain = 2 set freq to 231.25 2022-01-05 19:09:08 chain = 0 set freq to 237.50 2022-01-05 19:09:08 chain = 1 set freq to 237.50 2022-01-05 19:09:08 chain = 2 set freq to 237.50 2022-01-05 19:09:11 chain = 0 set freq to 243.75 2022-01-05 19:09:11 chain = 1 set freq to 243.75 2022-01-05 19:09:11 chain = 2 set freq to 243.75 2022-01-05 19:09:14 chain = 0 set freq to 250.00 2022-01-05 19:09:14 chain = 1 set freq to 250.00 2022-01-05 19:09:14 chain = 2 set freq to 250.00 2022-01-05 19:09:17 chain = 0 set freq to 256.25 2022-01-05 19:09:17 chain = 1 set freq to 256.25 2022-01-05 19:09:17 chain = 2 set freq to 256.25 2022-01-05 19:09:20 chain = 0 set freq to 262.50 2022-01-05 19:09:20 chain = 1 set freq to 262.50 2022-01-05 19:09:20 chain = 2 set freq to 262.50 2022-01-05 19:09:23 chain = 0 set freq to 268.75 2022-01-05 19:09:23 chain = 1 set freq to 268.75 2022-01-05 19:09:23 chain = 2 set freq to 268.75 2022-01-05 19:09:26 chain = 0 set freq to 275.00 2022-01-05 19:09:26 chain = 1 set freq to 275.00 2022-01-05 19:09:26 chain = 2 set freq to 275.00 2022-01-05 19:09:29 chain = 0 set freq to 281.25 2022-01-05 19:09:29 chain = 1 set freq to 281.25 2022-01-05 19:09:29 chain = 2 set freq to 281.25 2022-01-05 19:09:32 chain = 0 set freq to 287.50 2022-01-05 19:09:32 chain = 1 set freq to 287.50 2022-01-05 19:09:32 chain = 2 set freq to 287.50 2022-01-05 19:09:35 chain = 0 set freq to 293.75 2022-01-05 19:09:35 chain = 1 set freq to 293.75 2022-01-05 19:09:35 chain = 2 set freq to 293.75 2022-01-05 19:09:38 chain = 0 set freq to 300.00 2022-01-05 19:09:38 chain = 1 set freq to 300.00 2022-01-05 19:09:38 chain = 2 set freq to 300.00 2022-01-05 19:09:41 chain = 0 set freq to 306.25 2022-01-05 19:09:41 chain = 1 set freq to 306.25 2022-01-05 19:09:41 chain = 2 set freq to 306.25 2022-01-05 19:09:44 chain = 0 set freq to 312.50 2022-01-05 19:09:44 chain = 1 set freq to 312.50 2022-01-05 19:09:44 chain = 2 set freq to 312.50 2022-01-05 19:09:47 chain = 0 set freq to 318.75 2022-01-05 19:09:47 chain = 1 set freq to 318.75 2022-01-05 19:09:47 chain = 2 set freq to 318.75 2022-01-05 19:09:50 chain = 0 set freq to 325.00 2022-01-05 19:09:50 chain = 1 set freq to 325.00 2022-01-05 19:09:50 chain = 2 set freq to 325.00 2022-01-05 19:09:53 chain = 0 set freq to 331.25 2022-01-05 19:09:53 chain = 1 set freq to 331.25 2022-01-05 19:09:53 chain = 2 set freq to 331.25 2022-01-05 19:09:56 chain = 0 set freq to 337.50 2022-01-05 19:09:56 chain = 1 set freq to 337.50 2022-01-05 19:09:56 chain = 2 set freq to 337.50 2022-01-05 19:09:59 chain = 0 set freq to 343.75 2022-01-05 19:09:59 chain = 1 set freq to 343.75 2022-01-05 19:09:59 chain = 2 set freq to 343.75 2022-01-05 19:10:02 chain = 0 set freq to 350.00 2022-01-05 19:10:02 chain = 1 set freq to 350.00 2022-01-05 19:10:02 chain = 2 set freq to 350.00 2022-01-05 19:10:05 chain = 0 set freq to 356.25 2022-01-05 19:10:05 chain = 1 set freq to 356.25 2022-01-05 19:10:05 chain = 2 set freq to 356.25 2022-01-05 19:10:08 chain = 0 set freq to 362.50 2022-01-05 19:10:08 chain = 1 set freq to 362.50 2022-01-05 19:10:08 chain = 2 set freq to 362.50 2022-01-05 19:10:11 chain = 0 set freq to 368.75 2022-01-05 19:10:11 chain = 1 set freq to 368.75 2022-01-05 19:10:11 chain = 2 set freq to 368.75 2022-01-05 19:10:14 chain = 0 set freq to 375.00 2022-01-05 19:10:14 chain = 1 set freq to 375.00 2022-01-05 19:10:14 chain = 2 set freq to 375.00 2022-01-05 19:10:17 chain = 0 set freq to 381.25 2022-01-05 19:10:17 chain = 1 set freq to 381.25 2022-01-05 19:10:17 chain = 2 set freq to 381.25 2022-01-05 19:10:20 chain = 0 set freq to 387.50 2022-01-05 19:10:20 chain = 1 set freq to 387.50 2022-01-05 19:10:20 chain = 2 set freq to 387.50 2022-01-05 19:10:23 chain = 0 set freq to 393.75 2022-01-05 19:10:23 chain = 1 set freq to 393.75 2022-01-05 19:10:23 chain = 2 set freq to 393.75 2022-01-05 19:10:26 chain = 0 set freq to 400.00 2022-01-05 19:10:26 chain = 1 set freq to 400.00 2022-01-05 19:10:26 chain = 2 set freq to 400.00 2022-01-05 19:10:29 chain = 0 set freq to 406.25 2022-01-05 19:10:29 chain = 1 set freq to 406.25 2022-01-05 19:10:29 chain = 2 set freq to 406.25 2022-01-05 19:10:32 chain = 0 set freq to 412.50 2022-01-05 19:10:32 chain = 1 set freq to 412.50 2022-01-05 19:10:32 chain = 2 set freq to 412.50 2022-01-05 19:10:35 chain = 0 set freq to 418.75 2022-01-05 19:10:35 chain = 1 set freq to 418.75 2022-01-05 19:10:35 chain = 2 set freq to 418.75 2022-01-05 19:10:38 chain = 0 set freq to 425.00 2022-01-05 19:10:38 chain = 1 set freq to 425.00 2022-01-05 19:10:38 chain = 2 set freq to 425.00 2022-01-05 19:10:41 chain = 0 set freq to 431.25 2022-01-05 19:10:41 chain = 1 set freq to 431.25 2022-01-05 19:10:41 chain = 2 set freq to 431.25 2022-01-05 19:10:44 chain = 0 set freq to 437.50 2022-01-05 19:10:44 chain = 1 set freq to 437.50 2022-01-05 19:10:44 chain = 2 set freq to 437.50 2022-01-05 19:10:47 chain = 0 set freq to 443.75 2022-01-05 19:10:47 chain = 1 set freq to 443.75 2022-01-05 19:10:47 chain = 2 set freq to 443.75 2022-01-05 19:10:50 chain = 0 set freq to 450.00 2022-01-05 19:10:50 chain = 1 set freq to 450.00 2022-01-05 19:10:50 chain = 2 set freq to 450.00 2022-01-05 19:10:53 chain = 0 set freq to 456.25 2022-01-05 19:10:53 chain = 1 set freq to 456.25 2022-01-05 19:10:53 chain = 2 set freq to 456.25 2022-01-05 19:10:56 chain = 0 set freq to 462.50 2022-01-05 19:10:56 chain = 1 set freq to 462.50 2022-01-05 19:10:56 chain = 2 set freq to 462.50 2022-01-05 19:10:59 chain = 0 set freq to 468.75 2022-01-05 19:10:59 chain = 1 set freq to 468.75 2022-01-05 19:10:59 chain = 2 set freq to 468.75 2022-01-05 19:11:02 chain = 0 set freq to 475.00 2022-01-05 19:11:02 chain = 1 set freq to 475.00 2022-01-05 19:11:02 chain = 2 set freq to 475.00 2022-01-05 19:11:05 chain = 0 set freq to 481.25 2022-01-05 19:11:05 chain = 1 set freq to 481.25 2022-01-05 19:11:05 chain = 2 set freq to 481.25 2022-01-05 19:11:08 chain = 0 set freq to 487.50 2022-01-05 19:11:08 chain = 1 set freq to 487.50 2022-01-05 19:11:08 chain = 2 set freq to 487.50 2022-01-05 19:11:11 chain = 0 set freq to 493.75 2022-01-05 19:11:11 chain = 1 set freq to 493.75 2022-01-05 19:11:11 chain = 2 set freq to 493.75 2022-01-05 19:11:14 chain = 0 set freq to 500.00 2022-01-05 19:11:14 chain = 1 set freq to 500.00 2022-01-05 19:11:14 chain = 2 set freq to 500.00 2022-01-05 19:11:17 chain = 0 set freq to 506.25 2022-01-05 19:11:17 chain = 1 set freq to 506.25 2022-01-05 19:11:17 chain = 2 set freq to 506.25 2022-01-05 19:11:20 chain = 0 set freq to 512.50 2022-01-05 19:11:20 chain = 1 set freq to 512.50 2022-01-05 19:11:20 chain = 2 set freq to 512.50 2022-01-05 19:11:23 chain = 0 set freq to 518.75 2022-01-05 19:11:23 chain = 1 set freq to 518.75 2022-01-05 19:11:23 chain = 2 set freq to 518.75 2022-01-05 19:11:26 chain = 0 set freq to 525.00 2022-01-05 19:11:26 chain = 1 set freq to 525.00 2022-01-05 19:11:26 chain = 2 set freq to 525.00 2022-01-05 19:11:29 chain = 0 set freq to 531.25 2022-01-05 19:11:29 chain = 1 set freq to 531.25 2022-01-05 19:11:29 chain = 2 set freq to 531.25 2022-01-05 19:11:32 chain = 0 set freq to 537.50 2022-01-05 19:11:32 chain = 1 set freq to 537.50 2022-01-05 19:11:32 chain = 2 set freq to 537.50 2022-01-05 19:11:35 chain = 0 set freq to 543.75 2022-01-05 19:11:35 chain = 1 set freq to 543.75 2022-01-05 19:11:35 chain = 2 set freq to 543.75 2022-01-05 19:11:38 chain = 0 set freq to 545.00 2022-01-05 19:11:38 chain = 1 set freq to 545.00 2022-01-05 19:11:38 chain = 2 set freq to 545.00 2022-01-05 19:11:42 set_voltage_by_steps to 1436. 2022-01-05 19:11:44 Init done! 2022-01-05 19:11:44 STATUS_OKAY 2022-01-05 19:11:44 start the cached job 2022-01-05 19:11:44 Version num 65536 2022-01-05 19:11:44 Mask num 0x1fffe000 2022-01-05 19:11:44 opt_multi_version = 65536, interval timeout = 2837042 2022-01-05 19:11:44 freq = 545, percent = 90, hcn = 4809, timeout = 2837042 2022-01-05 19:11:44 set_start_time_point total_tv_start_sys=444 total_tv_end_sys=445 2022-01-05 19:12:14 set_voltage_by_steps to 1426. 2022-01-05 19:12:47 set_voltage_by_steps to 1416. 2022-01-05 19:13:20 set_voltage_by_steps to 1406. 2022-01-05 19:14:06 set_voltage_by_steps to 1416. 2022-01-05 19:14:59 set_voltage_by_steps to 1428. 2022-01-05 19:16:13 set_voltage_by_steps to 1418. 2022-01-05 19:16:46 set_voltage_by_steps to 1408. 2022-01-05 19:18:36 !!! nonce crc error 2022-01-05 19:18:36 !!! nonce crc error 2022-01-05 19:18:36 !!! nonce crc error 2022-01-05 19:18:36 !!! nonce crc error 2022-01-05 19:18:36 !!! nonce crc error 2022-01-05 19:18:36 !!! nonce crc error 2022-01-05 19:25:03 !!! nonce crc error 2022-01-05 19:25:03 !!! nonce crc error 2022-01-05 19:25:03 !!! nonce crc error 2022-01-05 19:25:03 !!! nonce crc error 2022-01-05 19:25:03 !!! nonce crc error 2022-01-05 19:25:03 !!! nonce crc error 2022-01-05 19:25:03 !!! nonce crc error 2022-01-05 19:25:03 !!! nonce crc error 2022-01-05 19:25:03 !!! nonce crc error 2022-01-05 19:25:03 !!! nonce crc error 2022-01-05 19:25:03 !!! nonce crc error 2022-01-05 19:25:03 !!! nonce crc error 2022-01-05 19:25:04 !!! nonce crc error 2022-01-05 19:25:04 !!! nonce crc error 2022-01-05 19:25:04 !!! nonce crc error 2022-01-05 19:25:04 !!! nonce crc error 2022-01-05 19:25:04 !!! nonce crc error 2022-01-05 19:25:04 !!! nonce crc error 2022-01-05 19:25:04 !!! nonce crc error 2022-01-05 19:25:04 !!! nonce crc error 2022-01-05 19:25:04 !!! nonce crc error 2022-01-05 19:25:04 !!! nonce crc error 2022-01-05 19:25:04 !!! nonce crc error 2022-01-05 19:25:04 !!! nonce crc error 2022-01-05 19:25:04 !!! nonce crc error 2022-01-05 19:25:04 !!! nonce crc error 2022-01-05 19:25:04 !!! nonce crc error 2022-01-05 19:25:04 !!! nonce crc error 2022-01-05 19:25:04 !!! nonce crc error 2022-01-05 19:25:04 !!! nonce crc error 2022-01-05 19:25:04 !!! nonce crc error
-
Official comment
Hello, please clean up the dust, and restore it to the factory settings, then upgrade the firmware.
Comment actions
Please sign in to leave a comment.
Comments
1 comment