Problem with S 19 95TH
Hi Team (or anyone)
I just bought the S19 95TH about 2 to 3 months ago and am having issues with the 3 rd Hashing board it is saying abnormal and not performing properly goes down to about 8 GH/s
I have reset the unit and set it up again it works ok for about 5 minutes then it starts to drop the hash rate on the 3rd hash board overall hash rate is about 72GH/S.
Is it the hash board that's faulty already only after few months using ????
I have S19 pro,S19J pro as well 6 all up but only issue with the S19 95Th
Can you guys help please.
-
Official comment
Hello, please try to troubleshoot it by cleaning the dust and sd card flash.
Comment actions -
This is the log file
free_area_init_node: node 0, pgdat c0b3c040, node_mem_map cde10000 Normal zone: 480 pages used for memmap Normal zone: 0 pages reserved Normal zone: 61440 pages, LIFO batch:15 percpu: Embedded 12 pages/cpu @cddf0000 s19916 r8192 d21044 u49152 pcpu-alloc: s19916 r8192 d21044 u49152 alloc=12*4096 pcpu-alloc: [0] 0 [0] 1 Built 1 zonelists in Zone order, mobility grouping on. Total pages: 60960 Kernel command line: mem=240M console=ttyPS0,115200 ramdisk_size=33554432 root=/dev/ram rw earlyprintk PID hash table entries: 1024 (order: 0, 4096 bytes) Dentry cache hash table entries: 32768 (order: 5, 131072 bytes) Inode-cache hash table entries: 16384 (order: 4, 65536 bytes) Memory: 209680K/245760K available (6317K kernel code, 243K rwdata, 1932K rodata, 1024K init, 232K bss, 19696K reserved, 16384K cma-reserved, 0K highmem) Virtual kernel memory layout: vector : 0xffff0000 - 0xffff1000 ( 4 kB) fixmap : 0xffc00000 - 0xfff00000 (3072 kB) vmalloc : 0xcf800000 - 0xff800000 ( 768 MB) lowmem : 0xc0000000 - 0xcf000000 ( 240 MB) pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB) modules : 0xbf000000 - 0xbfe00000 ( 14 MB) .text : 0xc0008000 - 0xc090e410 (9242 kB) .init : 0xc0a00000 - 0xc0b00000 (1024 kB) .data : 0xc0b00000 - 0xc0b3cda0 ( 244 kB) .bss : 0xc0b3cda0 - 0xc0b77024 ( 233 kB) Preemptible hierarchical RCU implementation. Build-time adjustment of leaf fanout to 32. RCU restricting CPUs from NR_CPUS=4 to nr_cpu_ids=2. RCU: Adjusting geometry for rcu_fanout_leaf=32, nr_cpu_ids=2 NR_IRQS:16 nr_irqs:16 16 efuse mapped to cf800000 ps7-slcr mapped to cf802000 L2C: platform modifies aux control register: 0x72360000 -> 0x72760000 L2C: DT/platform modifies aux control register: 0x72360000 -> 0x72760000 L2C-310 erratum 769419 enabled L2C-310 enabling early BRESP for Cortex-A9 L2C-310 full line of zeros enabled for Cortex-A9 L2C-310 ID prefetch enabled, offset 1 lines L2C-310 dynamic clock gating enabled, standby mode enabled L2C-310 cache controller enabled, 8 ways, 512 kB L2C-310: CACHE_ID 0x410000c8, AUX_CTRL 0x76760001 zynq_clock_init: clkc starts at cf802100 Zynq clock init sched_clock: 64 bits at 333MHz, resolution 3ns, wraps every 4398046511103ns clocksource: arm_global_timer: mask: 0xffffffffffffffff max_cycles: 0x4ce07af025, max_idle_ns: 440795209040 ns Switching to timer-based delay loop, resolution 3ns clocksource: ttc_clocksource: mask: 0xffff max_cycles: 0xffff, max_idle_ns: 537538477 ns ps7-ttc #0 at cf80a000, irq=18 Console: colour dummy device 80x30 Calibrating delay loop (skipped), value calculated using timer frequency.. 666.66 BogoMIPS (lpj=3333333) pid_max: default: 32768 minimum: 301 Mount-cache hash table entries: 1024 (order: 0, 4096 bytes) Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes) CPU: Testing write buffer coherency: ok CPU0: thread -1, cpu 0, socket 0, mpidr 80000000 Setting up static identity map for 0x100000 - 0x100058 CPU1: failed to boot: -1 Brought up 1 CPUs SMP: Total of 1 processors activated (666.66 BogoMIPS). CPU: All CPU(s) started in SVC mode. devtmpfs: initialized VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 4 clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns pinctrl core: initialized pinctrl subsystem NET: Registered protocol family 16 DMA: preallocated 256 KiB pool for atomic coherent allocations cpuidle: using governor menu hw-breakpoint: found 5 (+1 reserved) breakpoint and 1 watchpoint registers. hw-breakpoint: maximum watchpoint size is 4 bytes. zynq-ocm f800c000.ps7-ocmc: ZYNQ OCM pool: 256 KiB @ 0xcf880000 vgaarb: loaded SCSI subsystem initialized usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb media: Linux media interface: v0.10 Linux video capture interface: v2.00 pps_core: LinuxPPS API ver. 1 registered pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it> PTP clock support registered EDAC MC: Ver: 3.0.0 Advanced Linux Sound Architecture Driver Initialized. clocksource: Switched to clocksource arm_global_timer NET: Registered protocol family 2 TCP established hash table entries: 2048 (order: 1, 8192 bytes) TCP bind hash table entries: 2048 (order: 2, 16384 bytes) TCP: Hash tables configured (established 2048 bind 2048) UDP hash table entries: 256 (order: 1, 8192 bytes) UDP-Lite hash table entries: 256 (order: 1, 8192 bytes) NET: Registered protocol family 1 RPC: Registered named UNIX socket transport module. RPC: Registered udp transport module. RPC: Registered tcp transport module. RPC: Registered tcp NFSv4.1 backchannel transport module. PCI: CLS 0 bytes, default 64 Trying to unpack rootfs image as initramfs... rootfs image is not initramfs (no cpio magic); looks like an initrd Freeing initrd memory: 6624K (cd482000 - cdafa000) hw perfevents: enabled with armv7_cortex_a9 PMU driver, 7 counters available futex hash table entries: 512 (order: 3, 32768 bytes) workingset: timestamp_bits=28 max_order=16 bucket_order=0 jffs2: version 2.2. (NAND) (SUMMARY) © 2001-2006 Red Hat, Inc. io scheduler noop registered io scheduler deadline registered io scheduler cfq registered (default) dma-pl330 f8003000.ps7-dma: Loaded driver for PL330 DMAC-241330 dma-pl330 f8003000.ps7-dma: DBUFF-128x8bytes Num_Chans-8 Num_Peri-4 Num_Events-16 e0000000.serial: ttyPS0 at MMIO 0xe0000000 (irq = 159, base_baud = 6249999) is a xuartps console [ttyPS0] enabled xdevcfg f8007000.ps7-dev-cfg: ioremap 0xf8007000 to cf86e000 [drm] Initialized drm 1.1.0 20060810 brd: module loaded loop: module loaded CAN device driver interface gpiod_set_value: invalid GPIO libphy: MACB_mii_bus: probed macb e000b000.ethernet eth0: Cadence GEM rev 0x00020118 at 0xe000b000 irq 31 (00:0a:35:00:00:00) Generic PHY e000b000.etherne:00: attached PHY driver [Generic PHY] (mii_bus:phy_addr=e000b000.etherne:00, irq=-1) e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k e1000e: Copyright(c) 1999 - 2015 Intel Corporation. ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver ehci-pci: EHCI PCI platform driver usbcore: registered new interface driver usb-storage mousedev: PS/2 mouse device common for all mice i2c /dev entries driver cdns-i2c e0005000.ps7_i2c: 100 kHz mmio e0005000 irq 154 Xilinx Zynq CpuIdle Driver started sdhci: Secure Digital Host Controller Interface driver sdhci: Copyright(c) Pierre Ossman sdhci-pltfm: SDHCI platform and OF driver helper mmc0: SDHCI controller on e0100000.ps7-sdio [e0100000.ps7-sdio] using ADMA ledtrig-cpu: registered to indicate activity on CPUs usbcore: registered new interface driver usbhid usbhid: USB HID core driver nand: disable subpage write nand: device found, Manufacturer ID: 0x2c, Chip ID: 0xda nand: Micron MT29F2G08ABAEAWP nand: 256 MiB, SLC, erase size: 128 KiB, page size: 2048, OOB size: 64 nand: NAND_ECC_HW nand: NAND_ECC_HW_SYNDROME mtd->writesize = 2048 ecc->strength = 1 ecc->size = 2048 mtd->writesize = 2048 chip->ecc_strength_ds = 4 chip->ecc_step_ds = 512 nand: WARNING: pl35x-nand: the ECC used on your system is too weak compared to the one required by the NAND chip Bad block table found at page 131008, version 0x01 Bad block table found at page 130944, version 0x01 8 ofpart partitions found on MTD device pl35x-nand Creating 8 MTD partitions on "pl35x-nand": 0x000000000000-0x000002800000 : "BOOT.bin-dts-marker-kernel" 0x000002800000-0x000004800000 : "ramfs" 0x000004800000-0x000005000000 : "configs" 0x000005000000-0x000005200000 : "sig" 0x000005200000-0x000006000000 : "reserve1" 0x000006000000-0x000007000000 : "upgrade-ramfs" 0x000007000000-0x00000a800000 : "upgrade-file" 0x00000a800000-0x000010000000 : "reserve2" nf_conntrack version 0.5.0 (3635 buckets, 14540 max) ip_tables: (C) 2000-2006 Netfilter Core Team NET: Registered protocol family 10 ip6_tables: (C) 2000-2006 Netfilter Core Team sit: IPv6 over IPv4 tunneling driver NET: Registered protocol family 17 can: controller area network core (rev 20120528 abi 9) NET: Registered protocol family 29 can: raw protocol (rev 20120528) can: broadcast manager protocol (rev 20120528 t) can: netlink gateway (rev 20130117) max_hops=1 zynq_pm_ioremap: no compatible node found for 'xlnx,zynq-ddrc-a05' zynq_pm_late_init: Unable to map DDRC IO memory. Registering SWP/SWPB emulation handler hctosys: unable to open rtc device (rtc0) ALSA device list: No soundcards found. RAMDISK: gzip image found at block 0 EXT4-fs (ram0): couldn't mount as ext3 due to feature incompatibilities EXT4-fs warning (device ram0): ext4_update_dynamic_rev:746: updating to rev 1 because of new feature flag, running e2fsck is recommended EXT4-fs (ram0): mounted filesystem without journal. Opts: (null) VFS: Mounted root (ext4 filesystem) on device 1:0. devtmpfs: mounted Freeing unused kernel memory: 1024K (c0a00000 - c0b00000) EXT4-fs (ram0): re-mounted. Opts: block_validity,delalloc,barrier,user_xattr,errors=remount-ro devpts: called with bogus options ubi0: attaching mtd2 ubi0: scanning is finished ubi0: attached mtd2 (name "configs", size 8 MiB) ubi0: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes ubi0: min./max. I/O unit sizes: 2048/2048, sub-page size 2048 ubi0: VID header offset: 2048 (aligned 2048), data offset: 4096 ubi0: good PEBs: 64, bad PEBs: 0, corrupted PEBs: 0 ubi0: user volume: 1, internal volumes: 1, max. volumes count: 128 ubi0: max/mean erase counter: 5/2, WL threshold: 4096, image sequence number: 1579897259 ubi0: available PEBs: 0, total reserved PEBs: 64, PEBs reserved for bad PEB handling: 4 ubi0: background thread "ubi_bgt0d" started, PID 729 UBIFS (ubi0:0): background thread "ubifs_bgt0_0" started, PID 733 UBIFS (ubi0:0): recovery needed UBIFS (ubi0:0): recovery completed UBIFS (ubi0:0): UBIFS: mounted UBI device 0, volume 0, name "config_data" UBIFS (ubi0:0): LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes UBIFS (ubi0:0): FS size: 5840896 bytes (5 MiB, 46 LEBs), journal size 1015809 bytes (0 MiB, 6 LEBs) UBIFS (ubi0:0): reserved for root: 275879 bytes (269 KiB) UBIFS (ubi0:0): media format: w4/r0 (latest is w4/r0), UUID 76DA8793-E171-4F7F-A4F0-48E77D80F3AC, small LPT model ubi2: attaching mtd4 ubi2: scanning is finished ubi2: attached mtd4 (name "reserve1", size 14 MiB) ubi2: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes ubi2: min./max. I/O unit sizes: 2048/2048, sub-page size 2048 ubi2: VID header offset: 2048 (aligned 2048), data offset: 4096 ubi2: good PEBs: 112, bad PEBs: 0, corrupted PEBs: 0 ubi2: user volume: 1, internal volumes: 1, max. volumes count: 128 ubi2: max/mean erase counter: 5/2, WL threshold: 4096, image sequence number: 1636606032 ubi2: available PEBs: 0, total reserved PEBs: 112, PEBs reserved for bad PEB handling: 4 ubi2: background thread "ubi_bgt2d" started, PID 740 UBIFS (ubi2:0): background thread "ubifs_bgt2_0" started, PID 744 UBIFS (ubi2:0): recovery needed UBIFS (ubi2:0): recovery completed UBIFS (ubi2:0): UBIFS: mounted UBI device 2, volume 0, name "misc" UBIFS (ubi2:0): LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes UBIFS (ubi2:0): FS size: 11935744 bytes (11 MiB, 94 LEBs), journal size 1015809 bytes (0 MiB, 6 LEBs) UBIFS (ubi2:0): reserved for root: 563754 bytes (550 KiB) UBIFS (ubi2:0): media format: w4/r0 (latest is w4/r0), UUID 47EF1377-256E-40D0-B480-C12D0241F9D5, small LPT model IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready random: avahi-daemon urandom read with 2 bits of entropy available macb e000b000.ethernet eth0: unable to generate target frequency: 25000000 Hz macb e000b000.ethernet eth0: link up (100/Full) IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready In axi fpga driver! request_mem_region OK! AXI fpga dev virtual address is 0xcfbc8000 *base_vir_addr = 0xb031 In fpga mem driver! request_mem_region OK! fpga mem virtual address is 0xd2000000 random: nonblocking pool is initialized ===========================================Miner log=========================================== 1970-01-01 00:00:10 Miner compile time: Sun Apr 11 20:36:08 CST 2021 type: Antminer S19 1970-01-01 00:00:11 This is fix-freq version 1970-01-01 00:00:11 Miner compile time: Sun Apr 11 20:36:08 CST 2021 type: Antminer S19 1970-01-01 00:00:11 commit version: 1821c90 2020-11-16 16:05:37, build by: jenkins 2021-04-11 20:48:35 1970-01-01 00:00:11 opt_multi_version = 1 1970-01-01 00:00:11 opt_bitmain_ab = 1 1970-01-01 00:00:11 mid_auto_gen = 0 1970-01-01 00:00:11 opt_bitmain_work_mode = 0 1970-01-01 00:00:11 mmap fpga_mem_addr_hal = 0xb5800000 1970-01-01 00:00:11 HASH_ON_PLUG V9 = 0x7 1970-01-01 00:00:11 Note: front fan is power on! 1970-01-01 00:00:11 Note: rear fan is power on! 1970-01-01 00:00:11 start the http log. 1970-01-01 00:00:11 httpListenThread start ret=0 1970-01-01 00:00:11 start listen on 6060 ... 1970-01-01 00:00:11 load machine NBS1902 conf 1970-01-01 00:00:11 machine : NBS1902 1970-01-01 00:00:11 chain_num 4, chain_domain_num 38, chain_asic_num 76, domain_asic_num 2 1970-01-01 00:00:17 miner ID : 8162a5467910481c 1970-01-01 00:00:17 FPGA Version = 0xB031 1970-01-01 00:00:17 HASH_ON_PLUG V9 = 0x7 1970-01-01 00:00:17 ==========================capability start========================== 1970-01-01 00:00:17 board num = 3 1970-01-01 00:00:17 board id = 0, chain num = 1 1970-01-01 00:00:17 chain id = 0 1970-01-01 00:00:17 board id = 1, chain num = 1 1970-01-01 00:00:17 chain id = 1 1970-01-01 00:00:17 board id = 2, chain num = 1 1970-01-01 00:00:17 chain id = 2 1970-01-01 00:00:17 ==========================capability end============================ 1970-01-01 00:00:17 chain num = 3 2021-12-07 05:51:04 [chain 0] 2021-12-07 05:51:04 0x0000 11 4A 57 7C C5 36 A1 7E 25 27 15 3A 8A 4C D0 08 2021-12-07 05:51:04 0x0010 3D 17 02 34 BC C2 A7 11 87 D5 A6 B3 79 02 E4 27 2021-12-07 05:51:04 0x0020 04 6D 0C BB D8 7F 0A 05 4A B0 86 3A FF A4 F4 64 2021-12-07 05:51:04 0x0030 44 84 E8 0B 4C 3A 77 E0 B3 BE 79 DD 2F 24 70 23 2021-12-07 05:51:04 0x0040 01 B4 EA 3F 56 C3 39 99 1E EA FF FF FF FF FF FF 2021-12-07 05:51:04 0x0050 FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF 2021-12-07 05:51:04 0x0060 FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF 2021-12-07 05:51:04 0x0070 FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF 2021-12-07 05:51:04 0x0080 FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF 2021-12-07 05:51:04 0x0090 FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF 2021-12-07 05:51:04 0x00A0 FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF 2021-12-07 05:51:04 0x00B0 FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF 2021-12-07 05:51:04 0x00C0 FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF 2021-12-07 05:51:04 0x00D0 FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF 2021-12-07 05:51:04 0x00E0 FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF 2021-12-07 05:51:04 0x00F0 FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF 5A 2021-12-07 05:51:04 2021-12-07 05:51:05 [chain 1] 2021-12-07 05:51:05 0x0000 11 4A D5 A7 C4 F5 D1 0C 7C 8C 19 27 CA 32 0F BF 2021-12-07 05:51:05 0x0010 8D D2 E8 06 6D 3D 6E DA 3C 42 7A 74 ED E8 E3 03 2021-12-07 05:51:05 0x0020 14 34 5C 5D E8 D2 BD C7 3D 6A B2 78 24 AE 6B 4E 2021-12-07 05:51:05 0x0030 ED D6 62 CA 23 8D B3 D8 AF 5D 54 10 AC 2E E1 58 2021-12-07 05:51:05 0x0040 78 56 C9 91 00 EE F0 86 43 03 FF FF FF FF FF FF 2021-12-07 05:51:05 0x0050 FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF 2021-12-07 05:51:05 0x0060 FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF 2021-12-07 05:51:05 0x0070 FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF 2021-12-07 05:51:05 0x0080 FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF 2021-12-07 05:51:05 0x0090 FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF 2021-12-07 05:51:05 0x00A0 FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF 2021-12-07 05:51:05 0x00B0 FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF 2021-12-07 05:51:05 0x00C0 FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF 2021-12-07 05:51:05 0x00D0 FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF 2021-12-07 05:51:05 0x00E0 FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF 2021-12-07 05:51:05 0x00F0 FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF 5A 2021-12-07 05:51:05 2021-12-07 05:51:07 [chain 2] 2021-12-07 05:51:07 0x0000 11 4A 26 ED B9 0C 77 2C A2 7A 7C 92 E9 2B 3D AF 2021-12-07 05:51:07 0x0010 3F E6 DB 59 04 6A 6B D8 0B 79 19 AE E7 95 78 C0 2021-12-07 05:51:07 0x0020 7F A3 D0 28 88 60 3A 73 81 FF A2 E7 50 83 E7 43 2021-12-07 05:51:07 0x0030 63 67 CF 1E 64 98 AE 49 9A 1F 08 2D E1 BD B4 4F 2021-12-07 05:51:07 0x0040 39 37 3C F1 24 86 DD 8F 64 02 FF FF FF FF FF FF 2021-12-07 05:51:07 0x0050 FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF 2021-12-07 05:51:07 0x0060 FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF 2021-12-07 05:51:07 0x0070 FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF 2021-12-07 05:51:07 0x0080 FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF 2021-12-07 05:51:07 0x0090 FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF 2021-12-07 05:51:07 0x00A0 FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF 2021-12-07 05:51:07 0x00B0 FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF 2021-12-07 05:51:07 0x00C0 FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF 2021-12-07 05:51:07 0x00D0 FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF 2021-12-07 05:51:07 0x00E0 FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF 2021-12-07 05:51:07 0x00F0 FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF 5A 2021-12-07 05:51:07 2021-12-07 05:51:07 fan_eft : 0 fan_pwm : 100 2021-12-07 05:51:07 create thread 2021-12-07 05:51:07 fixed working voltage = 1380 2021-12-07 05:51:07 Chain [0] PCB Version: 0x011e 2021-12-07 05:51:07 Chain [0] BOM Version: 0x0100 2021-12-07 05:51:07 Chain [1] PCB Version: 0x011e 2021-12-07 05:51:07 Chain [1] BOM Version: 0x0100 2021-12-07 05:51:07 Chain [2] PCB Version: 0x011e 2021-12-07 05:51:07 Chain [2] BOM Version: 0x0100 2021-12-07 05:51:11 Fan check passed. 2021-12-07 05:51:12 chain[0] PIC jump to app 2021-12-07 05:51:14 Check chain[0] PIC fw version=0x89 2021-12-07 05:51:15 chain[1] PIC jump to app 2021-12-07 05:51:16 Check chain[1] PIC fw version=0x89 2021-12-07 05:51:17 chain[2] PIC jump to app 2021-12-07 05:51:19 Check chain[2] PIC fw version=0x89 2021-12-07 05:51:19 create thread 2021-12-07 05:51:19 max sensor num = 4 2021-12-07 05:51:19 temperature_monitor_thread start... 2021-12-07 05:51:23 power type version: 0x0071 2021-12-07 05:51:23 Enter sleep to make sure power release finish. 2021-12-07 05:51:54 Slept 30 seconds, diff = 3. 2021-12-07 05:51:54 set_voltage_by_steps to 1500. 2021-12-07 05:52:00 start up min temp by 75a = 23 2021-12-07 05:52:00 set UART baud to 115200 2021-12-07 05:52:04 chain avg vol rise to 15.32 2021-12-07 05:52:08 Chain[0]: find 76 asic, times 0 2021-12-07 05:52:16 Chain[1]: find 76 asic, times 0 2021-12-07 05:52:23 Chain[2]: find 76 asic, times 0 2021-12-07 05:52:23 pulse_mode = 1, ccdly_sel = 0, pwth_sel = 0 2021-12-07 05:52:27 min freq in eeprom = 675 2021-12-07 05:52:27 fixed frequency is 675 2021-12-07 05:52:27 Bring up temperature is 23 2021-12-07 05:52:27 set UART baud to 12000000 2021-12-07 05:52:27 set_voltage_by_steps to 1380. 2021-12-07 05:52:34 STATUS_INITED: soc init done! 2021-12-07 05:52:34 create thread 2021-12-07 05:52:34 create thread 2021-12-07 05:53:19 reload pool, need recalculate 2021-12-07 05:53:19 set_start_time_point total_tv_start_sys=154 total_tv_end_sys=155 2021-12-07 05:53:20 start to init... 2021-12-07 05:53:30 Init done! 2021-12-07 05:53:30 STATUS_OKAY 2021-12-07 05:53:30 set_start_time_point total_tv_start_sys=166 total_tv_end_sys=167 2021-12-07 05:53:50 Version num 8 2021-12-07 05:53:50 Mask num 0xe000 2021-12-07 05:53:50 freq = 675, percent = 90, hcn = 14560, timeout = 524 2021-12-07 08:22:41 avg rate is lower than ideal rate, 71092.40 in 30 mins 2021-12-07 08:52:43 avg rate is lower than ideal rate, 70012.41 in 30 mins 2021-12-07 09:22:44 avg rate is lower than ideal rate, 69800.37 in 30 mins 2021-12-07 09:52:46 avg rate is lower than ideal rate, 69309.50 in 30 mins 2021-12-07 10:22:48 avg rate is lower than ideal rate, 69329.64 in 30 mins 2021-12-07 10:52:49 avg rate is lower than ideal rate, 68642.25 in 30 mins 2021-12-07 10:55:39 read asic reg error: expect chain = 2, chip = 177, reg = 176, got chain = 2, chip = 174, reg = 176 2021-12-07 10:55:41 read asic reg error: expect chain = 2, chip = 189, reg = 176, got chain = 2, chip = 177, reg = 176 2021-12-07 10:55:41 read asic reg error: expect chain = 2, chip = 189, reg = 176, got chain = 2, chip = 180, reg = 176 2021-12-07 10:55:41 read asic reg error: expect chain = 2, chip = 189, reg = 176, got chain = 2, chip = 183, reg = 176 2021-12-07 10:55:41 read asic reg error: expect chain = 2, chip = 189, reg = 176, got chain = 2, chip = 186, reg = 176 2021-12-07 11:02:37 read asic reg error: expect chain = 2, chip = 213, reg = 176, got chain = 2, chip = 174, reg = 176 2021-12-07 11:02:37 read asic reg error: expect chain = 2, chip = 213, reg = 176, got chain = 2, chip = 177, reg = 176 2021-12-07 11:02:37 read asic reg error: expect chain = 2, chip = 213, reg = 176, got chain = 2, chip = 180, reg = 176 2021-12-07 11:02:37 read asic reg error: expect chain = 2, chip = 213, reg = 176, got chain = 2, chip = 183, reg = 176 2021-12-07 11:02:37 read asic reg error: expect chain = 2, chip = 213, reg = 176, got chain = 2, chip = 186, reg = 176 2021-12-07 11:02:37 read asic reg error: expect chain = 2, chip = 213, reg = 176, got chain = 2, chip = 189, reg = 176 2021-12-07 11:02:37 read asic reg error: expect chain = 2, chip = 213, reg = 176, got chain = 2, chip = 192, reg = 176 2021-12-07 11:02:37 read asic reg error: expect chain = 2, chip = 213, reg = 176, got chain = 2, chip = 195, reg = 176 2021-12-07 11:02:37 read asic reg error: expect chain = 2, chip = 213, reg = 176, got chain = 2, chip = 198, reg = 176 2021-12-07 11:02:37 read asic reg error: expect chain = 2, chip = 213, reg = 176, got chain = 2, chip = 201, reg = 176 2021-12-07 11:02:37 read asic reg error: expect chain = 2, chip = 213, reg = 176, got chain = 2, chip = 204, reg = 176 2021-12-07 11:02:37 read asic reg error: expect chain = 2, chip = 213, reg = 176, got chain = 2, chip = 207, reg = 176 2021-12-07 11:02:37 read asic reg error: expect chain = 2, chip = 213, reg = 176, got chain = 2, chip = 210, reg = 176 2021-12-07 11:25:54 read asic reg error: expect chain = 2, chip = 195, reg = 176, got chain = 2, chip = 174, reg = 176 2021-12-07 11:25:54 read asic reg error: expect chain = 2, chip = 195, reg = 176, got chain = 2, chip = 177, reg = 176 2021-12-07 11:26:52 read asic reg error: expect chain = 2, chip = 216, reg = 176, got chain = 2, chip = 195, reg = 176 2021-12-07 11:26:52 read asic reg error: expect chain = 2, chip = 216, reg = 176, got chain = 2, chip = 192, reg = 184 2021-12-07 11:26:52 read asic reg error: expect chain = 2, chip = 216, reg = 176, got chain = 2, chip = 198, reg = 176 2021-12-07 11:26:52 read asic reg error: expect chain = 2, chip = 216, reg = 176, got chain = 2, chip = 201, reg = 176 2021-12-07 11:26:52 read asic reg error: expect chain = 2, chip = 216, reg = 176, got chain = 2, chip = 204, reg = 176 2021-12-07 11:26:52 read asic reg error: expect chain = 2, chip = 216, reg = 176, got chain = 2, chip = 207, reg = 176 2021-12-07 11:26:52 read asic reg error: expect chain = 2, chip = 216, reg = 176, got chain = 2, chip = 210, reg = 176 2021-12-07 11:26:52 read asic reg error: expect chain = 2, chip = 216, reg = 176, got chain = 2, chip = 213, reg = 176 2021-12-07 11:29:53 read asic reg error: expect chain = 2, chip = 204, reg = 176, got chain = 2, chip = 174, reg = 176 2021-12-07 11:29:53 read asic reg error: expect chain = 2, chip = 204, reg = 176, got chain = 2, chip = 177, reg = 176 2021-12-07 11:29:53 read asic reg error: expect chain = 2, chip = 204, reg = 176, got chain = 2, chip = 180, reg = 176 2021-12-07 11:29:53 read asic reg error: expect chain = 2, chip = 204, reg = 176, got chain = 2, chip = 183, reg = 176 2021-12-07 11:29:53 read asic reg error: expect chain = 2, chip = 204, reg = 176, got chain = 2, chip = 186, reg = 176 2021-12-07 11:29:53 read asic reg error: expect chain = 2, chip = 204, reg = 176, got chain = 2, chip = 189, reg = 176 2021-12-07 11:29:53 read asic reg error: expect chain = 2, chip = 204, reg = 176, got chain = 2, chip = 192, reg = 176 2021-12-07 11:29:53 read asic reg error: expect chain = 2, chip = 204, reg = 176, got chain = 2, chip = 195, reg = 176 2021-12-07 11:29:53 read asic reg error: expect chain = 2, chip = 204, reg = 176, got chain = 2, chip = 198, reg = 176 2021-12-07 11:29:53 read asic reg error: expect chain = 2, chip = 204, reg = 176, got chain = 2, chip = 201, reg = 176 2021-12-07 11:37:52 chain 2 hash rate 5635.00 low in 15 mins 2021-12-07 11:52:53 avg rate is lower than ideal rate, 67770.68 in 30 mins 2021-12-07 11:52:53 chain 2 hash rate 2978.00 low in 15 mins 2021-12-07 12:22:54 avg rate is lower than ideal rate, 66349.82 in 30 mins 2021-12-07 12:52:56 avg rate is lower than ideal rate, 66351.44 in 30 mins 2021-12-07 13:22:58 avg rate is lower than ideal rate, 65927.35 in 30 mins 2021-12-07 13:52:59 avg rate is lower than ideal rate, 66454.56 in 30 mins 2021-12-07 14:23:01 avg rate is lower than ideal rate, 65979.85 in 30 mins 2021-12-07 14:53:02 avg rate is lower than ideal rate, 65531.14 in 30 mins 2021-12-07 15:23:04 avg rate is lower than ideal rate, 65268.40 in 30 mins 2021-12-07 15:53:06 avg rate is lower than ideal rate, 66043.31 in 30 mins 2021-12-07 16:23:07 avg rate is lower than ideal rate, 65650.80 in 30 mins 2021-12-07 16:53:09 avg rate is lower than ideal rate, 66122.63 in 30 mins 2021-12-07 17:23:11 avg rate is lower than ideal rate, 65705.89 in 30 mins 2021-12-07 17:53:12 avg rate is lower than ideal rate, 65438.34 in 30 mins 2021-12-07 18:23:14 avg rate is lower than ideal rate, 65248.88 in 30 mins 2021-12-07 18:53:16 avg rate is lower than ideal rate, 65342.49 in 30 mins 2021-12-07 19:23:17 avg rate is lower than ideal rate, 65116.47 in 30 mins 2021-12-07 19:53:19 avg rate is lower than ideal rate, 64688.14 in 30 mins -
Hello, you can contact us at support-cs@bitmain.com to provide the newest kernel log for further check.
Please sign in to leave a comment.
Comments
5 comments