Chain 2 only find 36 asic, will power off hash board 2

Hello,

I've updated the firmware, and after the update I am still having one of my hash boards turn off, and advice here. I will attempt to blow out dust today.



2021-12-01 03:45:18 Check chain[0] PIC fw version=0x89
2021-12-01 03:45:19 chain[1] PIC jump to app
2021-12-01 03:45:20 Check chain[1] PIC fw version=0x89
2021-12-01 03:45:22 chain[2] PIC jump to app
2021-12-01 03:45:23 Check chain[2] PIC fw version=0x89
2021-12-01 03:45:23 create thread pic_heart_beat_thread
2021-12-01 03:45:23 max sensor num = 4
2021-12-01 03:45:23 i2c_sim_init start
2021-12-01 03:45:23 temperature_monitor_thread start...
2021-12-01 03:45:23 i2c_sim_init end
2021-12-01 03:45:25 power open power_version = 0x71
2021-12-01 03:45:26 power type version: 0x0071
2021-12-01 03:45:26 Enter sleep to make sure power release finish.
2021-12-01 03:45:37 chain avg vol drop to 0.91
2021-12-01 03:46:14 Slept 47 seconds, diff = 5.
2021-12-01 03:46:15 set_voltage_by_steps to 1500.
2021-12-01 03:46:20 start up min temp by 75a = 29
2021-12-01 03:46:25 chain avg vol rise to 14.65
2021-12-01 03:46:30 Chain[0]: find 126 asic, times 0
2021-12-01 03:46:40 Chain[1]: find 126 asic, times 0
2021-12-01 03:46:50 Chain[2]: find 36 asic, times 0
2021-12-01 03:47:01 Chain[2]: find 36 asic, times 1
2021-12-01 03:47:12 Chain[2]: find 36 asic, times 2
2021-12-01 03:47:13 Chain 2 only find 36 asic, will power off hash board 2

Official comment

Linda

December 02, 2021 08:52

Hello, please provide the completed kernel log for further check.

Bitkelowna

December 03, 2021 16:43

Hello,

Here is a copy to the TXT file in dropbox, please let me know if you would like me to email it to you!

https://www.dropbox.com/s/hy2jooqt5mcjet5/ANTMINER_1_LOG.txt?dl=0

December 06, 2021 08:32

Hello, you can contact us at support-cs@bitmain.com

Chain 2 only find 36 asic, will power off hash board 2

Comments

Didn't find what you were looking for?