S19j pro Abnormal chip status(net lost)

Hello ser ,check this log plz

1970-01-01 00:00:26 Fan check passed.
1970-01-01 00:00:27 chain[0] PIC jump to app
1970-01-01 00:00:28 Check chain[0] PIC fw version=0x89
1970-01-01 00:00:29 chain[1] PIC jump to app
1970-01-01 00:00:31 Check chain[1] PIC fw version=0x89
1970-01-01 00:00:32 chain[2] PIC jump to app
1970-01-01 00:00:34 Check chain[2] PIC fw version=0x89
1970-01-01 00:00:34 create thread pic_heart_beat_thread
1970-01-01 00:00:34 max sensor num = 4
1970-01-01 00:00:34 temperature_monitor_thread start...
1970-01-01 00:00:38 power type version: 0x0071
1970-01-01 00:00:38 Enter sleep to make sure power release finish.
1970-01-01 00:01:09 Slept 30 seconds, diff = 1.
1970-01-01 00:01:10 set_voltage_by_steps to 1500.
1970-01-01 00:01:15 start up min temp by 75a = 11
1970-01-01 00:01:15 set UART baud to 115200
1970-01-01 00:01:18 chain avg vol rise to 15.36
1970-01-01 00:01:25 Chain[0]: find 126 asic, times 0
1970-01-01 00:01:36 Chain[1]: find 126 asic, times 0
1970-01-01 00:01:46 Chain[2]: find 126 asic, times 0
1970-01-01 00:01:51 pulse_mode = 1, ccdly_sel = 0, pwth_sel = 1
1970-01-01 00:01:55 min freq in eeprom = 505
1970-01-01 00:01:55 fixed frequency is 505
1970-01-01 00:01:55 Bring up temperature is 11
1970-01-01 00:01:55 set UART baud to 12000000
1970-01-01 00:01:56 pulse_mode = 1, ccdly_sel = 0, pwth_sel = 1
1970-01-01 00:01:56 start do_core_reset
1970-01-01 00:02:17 end do_core_reset
1970-01-01 00:02:17 STATUS_INITED: soc init done!
1970-01-01 00:02:17 create thread check_miner_status_thread
1970-01-01 00:02:17 create thread check_system_work_thread
1970-01-01 00:07:18 WARN_NET_LOST: network connection lost
1970-01-01 00:07:18 will power off in 118 seconds in case not resume
1970-01-01 00:09:15 network connection lost for 5 min + 118 seconds, power off...
1970-01-01 00:09:27 chain avg vol drop to 1.05

S19j pro Abnormal chip status(net lost)

Comments

Didn't find what you were looking for?