S19i Hardware error

I having a new brand s19i and I am getting a Hardware error. The Hash rate does not excessed 85T. And the Real Time Hashrate circle is always "Red".  Can somebody explain ?

and this the log:

pcpu-alloc: [0] 0 [0] 1
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 60960
Kernel command line: mem=240M console=ttyPS0,115200 ramdisk_size=33554432 root=/dev/ram rw earlyprintk
PID hash table entries: 1024 (order: 0, 4096 bytes)
Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
Memory: 209676K/245760K available (6317K kernel code, 243K rwdata, 1932K rodata, 1024K init, 232K bss, 19700K reserved, 16384K cma-reserved, 0K highmem)
Virtual kernel memory layout:
vector : 0xffff0000 - 0xffff1000 ( 4 kB)
fixmap : 0xffc00000 - 0xfff00000 (3072 kB)
vmalloc : 0xcf800000 - 0xff800000 ( 768 MB)
lowmem : 0xc0000000 - 0xcf000000 ( 240 MB)
pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
modules : 0xbf000000 - 0xbfe00000 ( 14 MB)
.text : 0xc0008000 - 0xc090e410 (9242 kB)
.init : 0xc0a00000 - 0xc0b00000 (1024 kB)
.data : 0xc0b00000 - 0xc0b3cda0 ( 244 kB)
.bss : 0xc0b3cda0 - 0xc0b77024 ( 233 kB)
Preemptible hierarchical RCU implementation.
Build-time adjustment of leaf fanout to 32.
RCU restricting CPUs from NR_CPUS=4 to nr_cpu_ids=2.
RCU: Adjusting geometry for rcu_fanout_leaf=32, nr_cpu_ids=2
NR_IRQS:16 nr_irqs:16 16
efuse mapped to cf800000
ps7-slcr mapped to cf802000
L2C: platform modifies aux control register: 0x72360000 -> 0x72760000
L2C: DT/platform modifies aux control register: 0x72360000 -> 0x72760000
L2C-310 erratum 769419 enabled
L2C-310 enabling early BRESP for Cortex-A9
L2C-310 full line of zeros enabled for Cortex-A9
L2C-310 ID prefetch enabled, offset 1 lines
L2C-310 dynamic clock gating enabled, standby mode enabled
L2C-310 cache controller enabled, 8 ways, 512 kB
L2C-310: CACHE_ID 0x410000c8, AUX_CTRL 0x76760001
zynq_clock_init: clkc starts at cf802100
Zynq clock init
sched_clock: 64 bits at 333MHz, resolution 3ns, wraps every 4398046511103ns
clocksource: arm_global_timer: mask: 0xffffffffffffffff max_cycles: 0x4ce07af025, max_idle_ns: 440795209040 ns
Switching to timer-based delay loop, resolution 3ns
clocksource: ttc_clocksource: mask: 0xffff max_cycles: 0xffff, max_idle_ns: 537538477 ns
ps7-ttc #0 at cf80a000, irq=18
Console: colour dummy device 80x30
Calibrating delay loop (skipped), value calculated using timer frequency.. 666.66 BogoMIPS (lpj=3333333)
pid_max: default: 32768 minimum: 301
Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
CPU: Testing write buffer coherency: ok
CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
Setting up static identity map for 0x100000 - 0x100058
CPU1: failed to boot: -1
Brought up 1 CPUs
SMP: Total of 1 processors activated (666.66 BogoMIPS).
CPU: All CPU(s) started in SVC mode.
devtmpfs: initialized
VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 4
clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
pinctrl core: initialized pinctrl subsystem
NET: Registered protocol family 16
DMA: preallocated 256 KiB pool for atomic coherent allocations
cpuidle: using governor menu
hw-breakpoint: found 5 (+1 reserved) breakpoint and 1 watchpoint registers.
hw-breakpoint: maximum watchpoint size is 4 bytes.
zynq-ocm f800c000.ps7-ocmc: ZYNQ OCM pool: 256 KiB @ 0xcf880000
vgaarb: loaded
SCSI subsystem initialized
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
media: Linux media interface: v0.10
Linux video capture interface: v2.00
pps_core: LinuxPPS API ver. 1 registered
pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
PTP clock support registered
EDAC MC: Ver: 3.0.0
Advanced Linux Sound Architecture Driver Initialized.
clocksource: Switched to clocksource arm_global_timer
NET: Registered protocol family 2
TCP established hash table entries: 2048 (order: 1, 8192 bytes)
TCP bind hash table entries: 2048 (order: 2, 16384 bytes)
TCP: Hash tables configured (established 2048 bind 2048)
UDP hash table entries: 256 (order: 1, 8192 bytes)
UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
NET: Registered protocol family 1
RPC: Registered named UNIX socket transport module.
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
RPC: Registered tcp NFSv4.1 backchannel transport module.
PCI: CLS 0 bytes, default 64
Trying to unpack rootfs image as initramfs...
rootfs image is not initramfs (no cpio magic); looks like an initrd
Freeing initrd memory: 6628K (cd481000 - cdafa000)
hw perfevents: enabled with armv7_cortex_a9 PMU driver, 7 counters available
futex hash table entries: 512 (order: 3, 32768 bytes)
workingset: timestamp_bits=28 max_order=16 bucket_order=0
jffs2: version 2.2. (NAND) (SUMMARY) © 2001-2006 Red Hat, Inc.
io scheduler noop registered
io scheduler deadline registered
io scheduler cfq registered (default)
dma-pl330 f8003000.ps7-dma: Loaded driver for PL330 DMAC-241330
dma-pl330 f8003000.ps7-dma: DBUFF-128x8bytes Num_Chans-8 Num_Peri-4 Num_Events-16
e0000000.serial: ttyPS0 at MMIO 0xe0000000 (irq = 159, base_baud = 6249999) is a xuartps
console [ttyPS0] enabled
xdevcfg f8007000.ps7-dev-cfg: ioremap 0xf8007000 to cf86e000
[drm] Initialized drm 1.1.0 20060810
brd: module loaded
loop: module loaded
CAN device driver interface
gpiod_set_value: invalid GPIO
libphy: MACB_mii_bus: probed
macb e000b000.ethernet eth0: Cadence GEM rev 0x00020118 at 0xe000b000 irq 31 (00:0a:35:00:00:00)
Generic PHY e000b000.etherne:00: attached PHY driver [Generic PHY] (mii_bus:phy_addr=e000b000.etherne:00, irq=-1)
e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k
e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci-pci: EHCI PCI platform driver
usbcore: registered new interface driver usb-storage
mousedev: PS/2 mouse device common for all mice
i2c /dev entries driver
cdns-i2c e0005000.ps7_i2c: 100 kHz mmio e0005000 irq 154
Xilinx Zynq CpuIdle Driver started
sdhci: Secure Digital Host Controller Interface driver
sdhci: Copyright(c) Pierre Ossman
sdhci-pltfm: SDHCI platform and OF driver helper
mmc0: SDHCI controller on e0100000.ps7-sdio [e0100000.ps7-sdio] using ADMA
ledtrig-cpu: registered to indicate activity on CPUs
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
nand: disable subpage write
nand: device found, Manufacturer ID: 0x2c, Chip ID: 0xda
nand: Micron MT29F2G08ABAEAWP
nand: 256 MiB, SLC, erase size: 128 KiB, page size: 2048, OOB size: 64
nand: NAND_ECC_HW
nand: NAND_ECC_HW_SYNDROME
mtd->writesize = 2048
ecc->strength = 1
ecc->size = 2048
mtd->writesize = 2048
chip->ecc_strength_ds = 4
chip->ecc_step_ds = 512
nand: WARNING: pl35x-nand: the ECC used on your system is too weak compared to the one required by the NAND chip
Bad block table found at page 131008, version 0x01
Bad block table found at page 130944, version 0x01
8 ofpart partitions found on MTD device pl35x-nand
Creating 8 MTD partitions on "pl35x-nand":
0x000000000000-0x000002800000 : "BOOT.bin-dts-marker-kernel"
0x000002800000-0x000004800000 : "ramfs"
0x000004800000-0x000005000000 : "configs"
0x000005000000-0x000005200000 : "sig"
0x000005200000-0x000006000000 : "reserve1"
0x000006000000-0x000007000000 : "upgrade-ramfs"
0x000007000000-0x00000a800000 : "upgrade-file"
0x00000a800000-0x000010000000 : "reserve2"
nf_conntrack version 0.5.0 (3635 buckets, 14540 max)
ip_tables: (C) 2000-2006 Netfilter Core Team
NET: Registered protocol family 10
ip6_tables: (C) 2000-2006 Netfilter Core Team
sit: IPv6 over IPv4 tunneling driver
NET: Registered protocol family 17
can: controller area network core (rev 20120528 abi 9)
NET: Registered protocol family 29
can: raw protocol (rev 20120528)
can: broadcast manager protocol (rev 20120528 t)
can: netlink gateway (rev 20130117) max_hops=1
zynq_pm_ioremap: no compatible node found for 'xlnx,zynq-ddrc-a05'
zynq_pm_late_init: Unable to map DDRC IO memory.
Registering SWP/SWPB emulation handler
hctosys: unable to open rtc device (rtc0)
ALSA device list:
No soundcards found.
RAMDISK: gzip image found at block 0
EXT4-fs (ram0): couldn't mount as ext3 due to feature incompatibilities
EXT4-fs warning (device ram0): ext4_update_dynamic_rev:746: updating to rev 1 because of new feature flag, running e2fsck is recommended
EXT4-fs (ram0): mounted filesystem without journal. Opts: (null)
VFS: Mounted root (ext4 filesystem) on device 1:0.
devtmpfs: mounted
Freeing unused kernel memory: 1024K (c0a00000 - c0b00000)
EXT4-fs (ram0): re-mounted. Opts: block_validity,delalloc,barrier,user_xattr,errors=remount-ro
devpts: called with bogus options
ubi0: attaching mtd2
ubi0: scanning is finished
ubi0: attached mtd2 (name "configs", size 8 MiB)
ubi0: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes
ubi0: min./max. I/O unit sizes: 2048/2048, sub-page size 2048
ubi0: VID header offset: 2048 (aligned 2048), data offset: 4096
ubi0: good PEBs: 64, bad PEBs: 0, corrupted PEBs: 0
ubi0: user volume: 1, internal volumes: 1, max. volumes count: 128
ubi0: max/mean erase counter: 4/2, WL threshold: 4096, image sequence number: 2256817255
ubi0: available PEBs: 0, total reserved PEBs: 64, PEBs reserved for bad PEB handling: 4
ubi0: background thread "ubi_bgt0d" started, PID 729
UBIFS (ubi0:0): background thread "ubifs_bgt0_0" started, PID 733
UBIFS (ubi0:0): recovery needed
UBIFS (ubi0:0): recovery completed
UBIFS (ubi0:0): UBIFS: mounted UBI device 0, volume 0, name "config_data"
UBIFS (ubi0:0): LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
UBIFS (ubi0:0): FS size: 5840896 bytes (5 MiB, 46 LEBs), journal size 1015809 bytes (0 MiB, 6 LEBs)
UBIFS (ubi0:0): reserved for root: 275879 bytes (269 KiB)
UBIFS (ubi0:0): media format: w4/r0 (latest is w4/r0), UUID 9DAD077F-2514-445D-9AA0-00EB70B0240E, small LPT model
ubi2: attaching mtd4
ubi2: scanning is finished
ubi2: attached mtd4 (name "reserve1", size 14 MiB)
ubi2: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes
ubi2: min./max. I/O unit sizes: 2048/2048, sub-page size 2048
ubi2: VID header offset: 2048 (aligned 2048), data offset: 4096
ubi2: good PEBs: 112, bad PEBs: 0, corrupted PEBs: 0
ubi2: user volume: 1, internal volumes: 1, max. volumes count: 128
ubi2: max/mean erase counter: 3/1, WL threshold: 4096, image sequence number: 2691880244
ubi2: available PEBs: 0, total reserved PEBs: 112, PEBs reserved for bad PEB handling: 4
ubi2: background thread "ubi_bgt2d" started, PID 740
UBIFS (ubi2:0): background thread "ubifs_bgt2_0" started, PID 744
UBIFS (ubi2:0): recovery needed
UBIFS (ubi2:0): recovery completed
UBIFS (ubi2:0): UBIFS: mounted UBI device 2, volume 0, name "misc"
UBIFS (ubi2:0): LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
UBIFS (ubi2:0): FS size: 11935744 bytes (11 MiB, 94 LEBs), journal size 1015809 bytes (0 MiB, 6 LEBs)
UBIFS (ubi2:0): reserved for root: 563754 bytes (550 KiB)
UBIFS (ubi2:0): media format: w4/r0 (latest is w4/r0), UUID 216E4CCC-EC1E-4112-B6EB-99142BFDA1A3, small LPT model
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
random: avahi-daemon urandom read with 2 bits of entropy available
macb e000b000.ethernet eth0: unable to generate target frequency: 25000000 Hz
macb e000b000.ethernet eth0: link up (100/Full)
IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
In axi fpga driver!
request_mem_region OK!
AXI fpga dev virtual address is 0xcfbc8000
*base_vir_addr = 0xb031
In fpga mem driver!
request_mem_region OK!
fpga mem virtual address is 0xd2000000
random: nonblocking pool is initialized
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
macb e000b000.ethernet eth0: unable to generate target frequency: 25000000 Hz
macb e000b000.ethernet eth0: link up (100/Full)
IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready

===========================================Miner log===========================================
1970-01-01 00:00:10 Miner compile time: Tue Apr 27 23:04:17 CST 2021 type: Antminer S19i
1970-01-01 00:00:11 This is fix-freq version
1970-01-01 00:00:11 Miner compile time: Tue Apr 27 23:04:17 CST 2021 type: Antminer S19i
1970-01-01 00:00:11 commit version: 1821c90 2020-11-16 16:05:37, build by: jenkins 2021-04-27 23:16:38
1970-01-01 00:00:11 opt_multi_version = 1
1970-01-01 00:00:11 opt_bitmain_ab = 1
1970-01-01 00:00:11 mid_auto_gen = 0
1970-01-01 00:00:11 opt_bitmain_work_mode = 0
1970-01-01 00:00:11 mmap fpga_mem_addr_hal = 0xb5800000
1970-01-01 00:00:11 HASH_ON_PLUG V9 = 0x7
1970-01-01 00:00:11 Note: front fan is power on!
1970-01-01 00:00:11 Note: rear fan is power on!
1970-01-01 00:00:11 start the http log.
1970-01-01 00:00:11 httpListenThread start ret=0
1970-01-01 00:00:11 start listen on 6060 ...
1970-01-01 00:00:11 load machine NBS2003 conf
1970-01-01 00:00:11 machine : NBS2003
1970-01-01 00:00:11 chain_num 4, chain_domain_num 40, chain_asic_num 80, domain_asic_num 2
1970-01-01 00:00:17 miner ID : 817c94c82b10481c
1970-01-01 00:00:17 FPGA Version = 0xB031
1970-01-01 00:00:17 HASH_ON_PLUG V9 = 0x7
1970-01-01 00:00:17 ==========================capability start==========================
1970-01-01 00:00:17 board num = 3
1970-01-01 00:00:17 board id = 0, chain num = 1
1970-01-01 00:00:17 chain id = 0
1970-01-01 00:00:17 board id = 1, chain num = 1
1970-01-01 00:00:17 chain id = 1
1970-01-01 00:00:17 board id = 2, chain num = 1
1970-01-01 00:00:17 chain id = 2
1970-01-01 00:00:17 ==========================capability end============================
1970-01-01 00:00:17 chain num = 3
2021-10-01 17:35:22 [chain 0]
2021-10-01 17:35:22 0x0000 11 4A 00 B0 FB C9 9C D4 9E 04 D7 A3 15 13 28 5C
2021-10-01 17:35:22 0x0010 1A 3D FA 78 15 28 BB D7 85 52 02 21 29 6F B7 CE
2021-10-01 17:35:22 0x0020 04 FE 27 99 44 20 34 75 69 6F 1C 77 05 A5 BB 27
2021-10-01 17:35:22 0x0030 65 02 11 07 B0 4D E4 35 42 A2 21 5C 42 AD BD CA
2021-10-01 17:35:22 0x0040 FA 5B 5D D0 B8 7A 9E 18 D8 4F FF FF FF FF FF FF
2021-10-01 17:35:22 0x0050 FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
2021-10-01 17:35:22 0x0060 FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
2021-10-01 17:35:22 0x0070 FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
2021-10-01 17:35:22 0x0080 FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
2021-10-01 17:35:22 0x0090 FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
2021-10-01 17:35:22 0x00A0 FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
2021-10-01 17:35:22 0x00B0 FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
2021-10-01 17:35:22 0x00C0 FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
2021-10-01 17:35:22 0x00D0 FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
2021-10-01 17:35:22 0x00E0 FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
2021-10-01 17:35:22 0x00F0 FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF 5A
2021-10-01 17:35:22
2021-10-01 17:35:24 [chain 1]
2021-10-01 17:35:24 0x0000 11 4A 3F BC 91 2E 42 D9 EB 9C 0A C3 AB 22 CA 55
2021-10-01 17:35:24 0x0010 8A 1D CF FA 6A 52 48 D3 7E 51 BE 21 36 98 A0 C6
2021-10-01 17:35:24 0x0020 92 EB 31 8A 1E A7 12 27 BF 33 1A 0C 79 15 75 2D
2021-10-01 17:35:24 0x0030 CB 90 EF 22 A3 22 D7 78 CD F5 25 C5 66 0E 40 8A
2021-10-01 17:35:24 0x0040 3B FC 06 E3 C5 EE EE 5F 37 56 FF FF FF FF FF FF
2021-10-01 17:35:24 0x0050 FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
2021-10-01 17:35:24 0x0060 FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
2021-10-01 17:35:24 0x0070 FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
2021-10-01 17:35:24 0x0080 FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
2021-10-01 17:35:24 0x0090 FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
2021-10-01 17:35:24 0x00A0 FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
2021-10-01 17:35:24 0x00B0 FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
2021-10-01 17:35:24 0x00C0 FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
2021-10-01 17:35:24 0x00D0 FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
2021-10-01 17:35:24 0x00E0 FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
2021-10-01 17:35:24 0x00F0 FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF 5A
2021-10-01 17:35:24
2021-10-01 17:35:26 [chain 2]
2021-10-01 17:35:26 0x0000 11 4A E8 3C 37 3C C3 E3 07 6A 59 93 91 39 B0 99
2021-10-01 17:35:26 0x0010 DA 7B 86 98 50 F5 74 91 4A 09 CD 80 CD 99 2B 68
2021-10-01 17:35:26 0x0020 F1 3A 65 AF 77 EF 31 28 63 96 15 03 3E 12 1A E8
2021-10-01 17:35:26 0x0030 0C 65 69 6D A2 F7 CE ED A0 E0 96 E9 C7 51 68 F4
2021-10-01 17:35:26 0x0040 45 B3 8C 7C 5E 87 A7 ED D5 E6 FF FF FF FF FF FF
2021-10-01 17:35:26 0x0050 FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
2021-10-01 17:35:26 0x0060 FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
2021-10-01 17:35:26 0x0070 FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
2021-10-01 17:35:26 0x0080 FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
2021-10-01 17:35:26 0x0090 FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
2021-10-01 17:35:26 0x00A0 FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
2021-10-01 17:35:26 0x00B0 FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
2021-10-01 17:35:26 0x00C0 FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
2021-10-01 17:35:26 0x00D0 FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
2021-10-01 17:35:26 0x00E0 FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
2021-10-01 17:35:26 0x00F0 FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF 5A
2021-10-01 17:35:26
2021-10-01 17:35:26 fan_eft : 0 fan_pwm : 100
2021-10-01 17:35:26 create thread
2021-10-01 17:35:26 fixed working voltage = 1260
2021-10-01 17:35:26 Chain [0] PCB Version: 0x010a
2021-10-01 17:35:26 Chain [0] BOM Version: 0x0100
2021-10-01 17:35:26 Chain [1] PCB Version: 0x010a
2021-10-01 17:35:26 Chain [1] BOM Version: 0x0100
2021-10-01 17:35:26 Chain [2] PCB Version: 0x010a
2021-10-01 17:35:26 Chain [2] BOM Version: 0x0100
2021-10-01 17:35:28 Fan check passed.
2021-10-01 17:35:29 chain[0] PIC jump to app
2021-10-01 17:35:30 Check chain[0] PIC fw version=0x89
2021-10-01 17:35:31 chain[1] PIC jump to app
2021-10-01 17:35:33 Check chain[1] PIC fw version=0x89
2021-10-01 17:35:34 chain[2] PIC jump to app
2021-10-01 17:35:36 Check chain[2] PIC fw version=0x89
2021-10-01 17:35:36 create thread
2021-10-01 17:35:36 max sensor num = 4
2021-10-01 17:35:36 temperature_monitor_thread start...
2021-10-01 17:35:40 power type version: 0x0071
2021-10-01 17:35:40 Enter sleep to make sure power release finish.
2021-10-01 17:37:24 reload pool, need recalculate
2021-10-01 17:37:24 set_start_time_point total_tv_start_sys=141 total_tv_end_sys=142
2021-10-01 17:38:41 Slept 180 seconds, diff = 15.
2021-10-01 17:38:41 set_voltage_by_steps to 1500.
2021-10-01 17:38:46 start up min temp by 75a = 39
2021-10-01 17:38:46 set UART baud to 115200
2021-10-01 17:38:54 Chain[0]: find 80 asic, times 0
2021-10-01 17:38:56 chain avg vol rise to 15.27
2021-10-01 17:39:02 Chain[1]: find 80 asic, times 0
2021-10-01 17:39:09 Chain[2]: find 80 asic, times 0
2021-10-01 17:39:09 pulse_mode = 1, ccdly_sel = 1, pwth_sel = 0
2021-10-01 17:39:13 min freq in eeprom = 625
2021-10-01 17:39:13 fixed frequency is 625
2021-10-01 17:39:13 Bring up temperature is 40
2021-10-01 17:39:13 set UART baud to 12000000
2021-10-01 17:39:13 bringup temp::40, compensate voltage 0.
2021-10-01 17:39:13 change voltage 1500 to 1260.
2021-10-01 17:39:13 set_voltage_by_steps to 1260.
2021-10-01 17:39:18 STATUS_INITED: soc init done!
2021-10-01 17:39:18 create thread
2021-10-01 17:39:18 create thread
2021-10-01 17:39:21 start to init...
2021-10-01 17:39:31 Init done!
2021-10-01 17:39:31 STATUS_OKAY
2021-10-01 17:39:31 start the cached job
2021-10-01 17:39:31 Version num 8
2021-10-01 17:39:31 Mask num 0xe000
2021-10-01 17:39:31 freq = 625, percent = 90, hcn = 15728, timeout = 566
2021-10-01 17:39:31 set_start_time_point total_tv_start_sys=268 total_tv_end_sys=269