Large amounts of Hardware Errors on S19 Pro 110

Answered

Comments

5 comments

  • Official comment

    Dear

    We checked the voltage is abnormal ,could you unplug-and plug the power line to double check it .

    Comment actions Permalink

    Good afternoon, 

    I am checking the voltage on the two miners now. I can't see how it could be a power problem, as I am running S19j Pro 104's off the same setup with next to 0 errors. But I am willing to try anything to fix the issue. 

    Could you point out where in the kernel log the voltage seems abnormal. I would like to narrow down my troubleshooting if I can. 

    - J

     

    0
    Comment actions Permalink

    Dear

    Did you unplug-and plug the power line to double check it ?

    0
    Comment actions Permalink

    Hello,

    Yes I have unplugged and plugged back in the power. Ran the machine for another 6 hours, errors still very high. I have checked the power cables and the power coming from the main to the machine. All is fine. 

    I have taken the miner and plugged it at a different location with different power altogether. I am still getting the same large amounts of hardware errors. 

    Would it be possible to point out where in the kernel code the error on voltage is. 

    -J

     

    0
    Comment actions Permalink

    we suggest you reboot the miner
    Information for you:
    https://support.bitmain.com/hc/en-us/articles/115000211033-How-to-power-off-reboot-or-restart-the-miner

    0
    Comment actions Permalink

Please sign in to leave a comment.