S17+ 17 THS IS NOT WORKING, HERE IS THE LOG AFTER 30 MIN

Answered

Follow

Alban Halilaga

• September 15, 2021 17:16

Booting Linux on physical CPU 0x0
Linux version 4.6.0-xilinx-gff8137b-dirty (lzq@armdev2) (gcc version 4.8.3 20140320 (prerelease) (Sourcery CodeBench Lite 2014.05-23) ) #25 SMP PREEMPT Fri Nov 23 15:30:52 CST 2018
CPU: ARMv7 Processor [413fc090] revision 0 (ARMv7), cr=18c5387d
CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
Machine model: Xilinx Zynq
cma: Reserved 16 MiB at 0x0e000000
Memory policy: Data cache writealloc
On node 0 totalpages: 61440
free_area_init_node: node 0, pgdat c0b39280, node_mem_map cde10000
Normal zone: 480 pages used for memmap
Normal zone: 0 pages reserved
Normal zone: 61440 pages, LIFO batch:15
percpu: Embedded 12 pages/cpu @cddf1000 s19776 r8192 d21184 u49152
pcpu-alloc: s19776 r8192 d21184 u49152 alloc=12*4096
pcpu-alloc: [0] 0 [0] 1
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 60960
Kernel command line: mem=240M console=ttyPS0,115200 ramdisk_size=33554432 root=/dev/ram rw earlyprintk
PID hash table entries: 1024 (order: 0, 4096 bytes)
Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
Memory: 203432K/245760K available (6345K kernel code, 231K rwdata, 1896K rodata, 1024K init, 223K bss, 25944K reserved, 16384K cma-reserved, 0K highmem)
Virtual kernel memory layout:
vector : 0xffff0000 - 0xffff1000 ( 4 kB)
fixmap : 0xffc00000 - 0xfff00000 (3072 kB)
vmalloc : 0xcf800000 - 0xff800000 ( 768 MB)
lowmem : 0xc0000000 - 0xcf000000 ( 240 MB)
pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
modules : 0xbf000000 - 0xbfe00000 ( 14 MB)
.text : 0xc0008000 - 0xc090c424 (9234 kB)
.init : 0xc0a00000 - 0xc0b00000 (1024 kB)
.data : 0xc0b00000 - 0xc0b39fe0 ( 232 kB)
.bss : 0xc0b39fe0 - 0xc0b71c28 ( 224 kB)
Preemptible hierarchical RCU implementation.
Build-time adjustment of leaf fanout to 32.
RCU restricting CPUs from NR_CPUS=4 to nr_cpu_ids=2.
RCU: Adjusting geometry for rcu_fanout_leaf=32, nr_cpu_ids=2
NR_IRQS:16 nr_irqs:16 16
efuse mapped to cf800000
ps7-slcr mapped to cf802000
L2C: platform modifies aux control register: 0x72360000 -> 0x72760000
L2C: DT/platform modifies aux control register: 0x72360000 -> 0x72760000
L2C-310 erratum 769419 enabled
L2C-310 enabling early BRESP for Cortex-A9
L2C-310 full line of zeros enabled for Cortex-A9
L2C-310 ID prefetch enabled, offset 1 lines
L2C-310 dynamic clock gating enabled, standby mode enabled
L2C-310 cache controller enabled, 8 ways, 512 kB
L2C-310: CACHE_ID 0x410000c8, AUX_CTRL 0x76760001
zynq_clock_init: clkc starts at cf802100
Zynq clock init
sched_clock: 64 bits at 333MHz, resolution 3ns, wraps every 4398046511103ns
clocksource: arm_global_timer: mask: 0xffffffffffffffff max_cycles: 0x4ce07af025, max_idle_ns: 440795209040 ns
Switching to timer-based delay loop, resolution 3ns
clocksource: ttc_clocksource: mask: 0xffff max_cycles: 0xffff, max_idle_ns: 537538477 ns
ps7-ttc #0 at cf80a000, irq=18
Console: colour dummy device 80x30
Calibrating delay loop (skipped), value calculated using timer frequency.. 666.66 BogoMIPS (lpj=3333333)
pid_max: default: 32768 minimum: 301
Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
CPU: Testing write buffer coherency: ok
CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
Setting up static identity map for 0x100000 - 0x100058
CPU1: failed to boot: -1
Brought up 1 CPUs
SMP: Total of 1 processors activated (666.66 BogoMIPS).
CPU: All CPU(s) started in SVC mode.
devtmpfs: initialized
VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 4
clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
pinctrl core: initialized pinctrl subsystem
NET: Registered protocol family 16
DMA: preallocated 256 KiB pool for atomic coherent allocations
cpuidle: using governor menu
hw-breakpoint: found 5 (+1 reserved) breakpoint and 1 watchpoint registers.
hw-breakpoint: maximum watchpoint size is 4 bytes.
zynq-ocm f800c000.ps7-ocmc: ZYNQ OCM pool: 256 KiB @ 0xcf880000
vgaarb: loaded
SCSI subsystem initialized
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
media: Linux media interface: v0.10
Linux video capture interface: v2.00
pps_core: LinuxPPS API ver. 1 registered
pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
PTP clock support registered
EDAC MC: Ver: 3.0.0
Advanced Linux Sound Architecture Driver Initialized.
clocksource: Switched to clocksource arm_global_timer
NET: Registered protocol family 2
TCP established hash table entries: 2048 (order: 1, 8192 bytes)
TCP bind hash table entries: 2048 (order: 2, 16384 bytes)
TCP: Hash tables configured (established 2048 bind 2048)
UDP hash table entries: 256 (order: 1, 8192 bytes)
UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
NET: Registered protocol family 1
RPC: Registered named UNIX socket transport module.
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
RPC: Registered tcp NFSv4.1 backchannel transport module.
PCI: CLS 0 bytes, default 64
Trying to unpack rootfs image as initramfs...
rootfs image is not initramfs (no cpio magic); looks like an initrd
Freeing initrd memory: 12904K (cce67000 - cdb01000)
hw perfevents: enabled with armv7_cortex_a9 PMU driver, 7 counters available
futex hash table entries: 512 (order: 3, 32768 bytes)
workingset: timestamp_bits=28 max_order=16 bucket_order=0
jffs2: version 2.2. (NAND) (SUMMARY) © 2001-2006 Red Hat, Inc.
io scheduler noop registered
io scheduler deadline registered
io scheduler cfq registered (default)
dma-pl330 f8003000.ps7-dma: Loaded driver for PL330 DMAC-241330
dma-pl330 f8003000.ps7-dma: DBUFF-128x8bytes Num_Chans-8 Num_Peri-4 Num_Events-16
e0000000.serial: ttyPS0 at MMIO 0xe0000000 (irq = 158, base_baud = 6249999) is a xuartps
console [ttyPS0] enabled
xdevcfg f8007000.ps7-dev-cfg: ioremap 0xf8007000 to cf86e000
[drm] Initialized drm 1.1.0 20060810
brd: module loaded
loop: module loaded
CAN device driver interface
gpiod_set_value: invalid GPIO
libphy: MACB_mii_bus: probed
macb e000b000.ethernet eth0: Cadence GEM rev 0x00020118 at 0xe000b000 irq 31 (00:0a:35:00:00:00)
Generic PHY e000b000.etherne:00: attached PHY driver [Generic PHY] (mii_bus:phy_addr=e000b000.etherne:00, irq=-1)
e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k
e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci-pci: EHCI PCI platform driver
usbcore: registered new interface driver usb-storage
mousedev: PS/2 mouse device common for all mice
i2c /dev entries driver
Xilinx Zynq CpuIdle Driver started
sdhci: Secure Digital Host Controller Interface driver
sdhci: Copyright(c) Pierre Ossman
sdhci-pltfm: SDHCI platform and OF driver helper
mmc0: SDHCI controller on e0100000.ps7-sdio [e0100000.ps7-sdio] using ADMA
ledtrig-cpu: registered to indicate activity on CPUs
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
nand: device found, Manufacturer ID: 0x2c, Chip ID: 0xda
nand: Micron MT29F2G08ABAEAWP
nand: 256 MiB, SLC, erase size: 128 KiB, page size: 2048, OOB size: 64
nand: WARNING: pl35x-nand: the ECC used on your system is too weak compared to the one required by the NAND chip
Bad block table found at page 131008, version 0x01
Bad block table found at page 130944, version 0x01
6 ofpart partitions found on MTD device pl35x-nand
Creating 6 MTD partitions on "pl35x-nand":
0x000000000000-0x000002800000 : "BOOT.bin-env-dts-kernel"
0x000002800000-0x000004800000 : "ramfs"
0x000004800000-0x000005000000 : "configs"
0x000005000000-0x000006000000 : "reserve"
0x000006000000-0x000008000000 : "ramfs-bak"
0x000008000000-0x000010000000 : "reserve1"
NET: Registered protocol family 10
sit: IPv6 over IPv4 tunneling driver
NET: Registered protocol family 17
can: controller area network core (rev 20120528 abi 9)
NET: Registered protocol family 29
can: raw protocol (rev 20120528)
can: broadcast manager protocol (rev 20120528 t)
can: netlink gateway (rev 20130117) max_hops=1
zynq_pm_ioremap: no compatible node found for 'xlnx,zynq-ddrc-a05'
zynq_pm_late_init: Unable to map DDRC IO memory.
Registering SWP/SWPB emulation handler
hctosys: unable to open rtc device (rtc0)
ALSA device list:
No soundcards found.
RAMDISK: gzip image found at block 0
EXT4-fs (ram0): couldn't mount as ext3 due to feature incompatibilities
EXT4-fs (ram0): mounted filesystem without journal. Opts: (null)
VFS: Mounted root (ext4 filesystem) on device 1:0.
devtmpfs: mounted
Freeing unused kernel memory: 1024K (c0a00000 - c0b00000)
EXT4-fs (ram0): re-mounted. Opts: block_validity,delalloc,barrier,user_xattr
random: dd urandom read with 0 bits of entropy available
ubi0: attaching mtd2
ubi0: scanning is finished
ubi0: attached mtd2 (name "configs", size 8 MiB)
ubi0: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes
ubi0: min./max. I/O unit sizes: 2048/2048, sub-page size 2048
ubi0: VID header offset: 2048 (aligned 2048), data offset: 4096
ubi0: good PEBs: 64, bad PEBs: 0, corrupted PEBs: 0
ubi0: user volume: 1, internal volumes: 1, max. volumes count: 128
ubi0: max/mean erase counter: 18/8, WL threshold: 4096, image sequence number: 385662122
ubi0: available PEBs: 0, total reserved PEBs: 64, PEBs reserved for bad PEB handling: 40
ubi0: background thread "ubi_bgt0d" started, PID 708
UBIFS (ubi0:0): background thread "ubifs_bgt0_0" started, PID 711
UBIFS (ubi0:0): recovery needed
UBIFS (ubi0:0): recovery completed
UBIFS (ubi0:0): UBIFS: mounted UBI device 0, volume 0, name "configs"
UBIFS (ubi0:0): LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
UBIFS (ubi0:0): FS size: 1396736 bytes (1 MiB, 11 LEBs), journal size 888833 bytes (0 MiB, 5 LEBs)
UBIFS (ubi0:0): reserved for root: 65970 bytes (64 KiB)
UBIFS (ubi0:0): media format: w4/r0 (latest is w4/r0), UUID 96E975B5-D709-4F7A-91F3-63688D81218B, small LPT model
ubi1: attaching mtd5
ubi1: scanning is finished
ubi1: attached mtd5 (name "reserve1", size 128 MiB)
ubi1: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes
ubi1: min./max. I/O unit sizes: 2048/2048, sub-page size 2048
ubi1: VID header offset: 2048 (aligned 2048), data offset: 4096
ubi1: good PEBs: 1020, bad PEBs: 4, corrupted PEBs: 0
ubi1: user volume: 1, internal volumes: 1, max. volumes count: 128
ubi1: max/mean erase counter: 10186/8063, WL threshold: 4096, image sequence number: 770410698
ubi1: available PEBs: 0, total reserved PEBs: 1020, PEBs reserved for bad PEB handling: 36
ubi1: background thread "ubi_bgt1d" started, PID 720
UBIFS (ubi1:0): background thread "ubifs_bgt1_0" started, PID 723
UBIFS (ubi1:0): recovery needed
UBIFS (ubi1:0): recovery completed
UBIFS (ubi1:0): UBIFS: mounted UBI device 1, volume 0, name "reserve1"
UBIFS (ubi1:0): LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
UBIFS (ubi1:0): FS size: 123039744 bytes (117 MiB, 969 LEBs), journal size 6221824 bytes (5 MiB, 49 LEBs)
UBIFS (ubi1:0): reserved for root: 4952683 bytes (4836 KiB)
UBIFS (ubi1:0): media format: w4/r0 (latest is w4/r0), UUID 2ED272CE-54AF-4265-9559-65B9A89C2067, small LPT model
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
macb e000b000.ethernet eth0: unable to generate target frequency: 25000000 Hz
macb e000b000.ethernet eth0: link up (100/Full)
IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
In axi fpga driver!
request_mem_region OK!
AXI fpga dev virtual address is 0xcfb38000
*base_vir_addr = 0xb023
In fpga mem driver!
request_mem_region OK!
fpga mem virtual address is 0xd2000000
random: nonblocking pool is initialized
2021-09-15 04:44:33 driver-btm-api.c:779:init_freq_mode: This is scan-user version
2021-09-15 04:44:33 driver-btm-api.c:2451:bitmain_soc_init: opt_multi_version = 1
2021-09-15 04:44:33 driver-btm-api.c:2452:bitmain_soc_init: opt_bitmain_ab = 1
2021-09-15 04:44:33 driver-btm-api.c:2453:bitmain_soc_init: opt_bitmain_work_mode = 0
2021-09-15 04:44:33 driver-btm-api.c:2454:bitmain_soc_init: Miner compile time: Tue Jun 2 10:31:07 CST 2020 type: Antminer S17+
2021-09-15 04:44:33 driver-btm-api.c:2455:bitmain_soc_init: commit version: 1ca50a5 2020-06-01 18:51:22, build by: lol 2020-06-02 10:37:21
2021-09-15 04:44:33 driver-btm-api.c:2083:show_sn: len:16, 81506cc42b104814
2021-09-15 04:44:33 driver-btm-api.c:2461:bitmain_soc_init: show sn return 1
2021-09-15 04:44:33 driver-btm-api.c:2103:handle_sn_for_factory_mode: show sn return 1
2021-09-15 04:44:33 driver-btm-api.c:2141:handle_sn_for_factory_mode: read sn success, 81506cc42b104814
2021-09-15 04:44:33 fan.c:284:front_fan_power_on: Note: front fan is power on!
2021-09-15 04:44:33 fan.c:296:rear_fan_power_on: Note: rear fan is power on!
2021-09-15 04:44:33 driver-btm-api.c:1314:miner_device_init: Detect 256MB control board of XILINX
2021-09-15 04:44:33 driver-btm-api.c:1255:init_fan_parameter: fan_eft : 0 fan_pwm : 0
2021-09-15 04:44:39 driver-btm-api.c:1239:init_miner_version: miner ID : 81506cc42b104814
2021-09-15 04:44:39 driver-btm-api.c:1245:init_miner_version: FPGA Version = 0xB023
2021-09-15 04:44:45 driver-btm-api.c:837:get_product_id: product_id[0] = 0
2021-09-15 04:44:45 driver-btm-api.c:837:get_product_id: product_id[1] = 0
2021-09-15 04:44:45 driver-btm-api.c:837:get_product_id: product_id[2] = 0
2021-09-15 04:44:45 driver-btm-api.c:2234:update_conf_by_power_feedback: Power feedback is disabled
2021-09-15 04:44:45 driver-btm-api.c:2202:get_calibration_voltage: calibration voltage flag is error data.
2021-09-15 04:44:45 driver-btm-api.c:2268:update_conf_by_power_feedback: Note: no calibration voltage, default diff = 0
2021-09-15 04:44:45 frequency.c:1457:adjust_higer_max_vol_table: adjust_higer_max_vol_table, adjust_vol = 0
2021-09-15 04:44:45 thread.c:1363:create_read_nonce_reg_thread: create thread
2021-09-15 04:44:51 driver-btm-api.c:1239:init_miner_version: miner ID : 81506cc42b104814
2021-09-15 04:44:51 driver-btm-api.c:1245:init_miner_version: FPGA Version = 0xB023
2021-09-15 04:44:56 driver-btm-api.c:837:get_product_id: product_id[0] = 0
2021-09-15 04:44:56 driver-btm-api.c:837:get_product_id: product_id[1] = 0
2021-09-15 04:44:56 driver-btm-api.c:837:get_product_id: product_id[2] = 0
2021-09-15 04:44:56 driver-btm-api.c:792:_set_project_type: project:0
2021-09-15 04:44:56 driver-btm-api.c:813:_set_project_type: Project type: Antminer S17+
2021-09-15 04:44:56 driver-btm-api.c:824:dump_pcb_bom_version: Chain [0] PCB Version: 0x0100
2021-09-15 04:44:56 driver-btm-api.c:825:dump_pcb_bom_version: Chain [0] BOM Version: 0x0100
2021-09-15 04:44:56 driver-btm-api.c:824:dump_pcb_bom_version: Chain [1] PCB Version: 0x0100
2021-09-15 04:44:56 driver-btm-api.c:825:dump_pcb_bom_version: Chain [1] BOM Version: 0x0100
2021-09-15 04:44:56 driver-btm-api.c:824:dump_pcb_bom_version: Chain [2] PCB Version: 0x0100
2021-09-15 04:44:56 driver-btm-api.c:825:dump_pcb_bom_version: Chain [2] BOM Version: 0x0100
2021-09-15 04:44:56 driver-btm-api.c:2372:bitmain_board_init: Fan check passed.
2021-09-15 04:44:57 board.c:36:jump_and_app_check_restore_pic: chain[0] PIC jump to app
2021-09-15 04:44:59 board.c:40:jump_and_app_check_restore_pic: Check chain[0] PIC fw version=0x88
2021-09-15 04:45:00 board.c:36:jump_and_app_check_restore_pic: chain[1] PIC jump to app
2021-09-15 04:45:02 board.c:40:jump_and_app_check_restore_pic: Check chain[1] PIC fw version=0x88
2021-09-15 04:45:03 board.c:36:jump_and_app_check_restore_pic: chain[2] PIC jump to app
2021-09-15 04:45:05 board.c:40:jump_and_app_check_restore_pic: Check chain[2] PIC fw version=0x88
2021-09-15 04:45:05 thread.c:1358:create_pic_heart_beat_thread: create thread
2021-09-15 04:45:05 power_api.c:213:power_init: Power init:
2021-09-15 04:45:05 power_api.c:214:power_init: current_voltage_raw = 0
2021-09-15 04:45:05 power_api.c:215:power_init: highest_voltage_raw = 2100
2021-09-15 04:45:05 power_api.c:216:power_init: working_voltage_raw = 1950
2021-09-15 04:45:05 power_api.c:217:power_init: higher_voltage_raw = 2040
2021-09-15 04:45:05 power_api.c:218:power_init: check_asic_voltage_raw = 2100
2021-09-15 04:45:05 driver-btm-api.c:2382:bitmain_board_init: Enter 30s sleep to make sure power release finish.
2021-09-15 04:45:05 power_api.c:186:power_off: init gpio907
2021-09-15 04:45:37 power_api.c:324:set_to_highest_voltage_by_steps: Set to voltage raw 2100, step by step.
2021-09-15 04:46:03 power_api.c:85:check_voltage_multi: retry time: 0
2021-09-15 04:46:04 power_api.c:40:_get_avg_voltage: chain = 0, voltage = 20.979670
2021-09-15 04:46:05 power_api.c:40:_get_avg_voltage: chain = 1, voltage = 20.958015
2021-09-15 04:46:06 power_api.c:40:_get_avg_voltage: chain = 2, voltage = 20.955528
2021-09-15 04:46:06 power_api.c:53:_get_avg_voltage: average_voltage = 20.964404
2021-09-15 04:46:06 power_api.c:71:check_voltage: target_vol = 21.00, actural_vol = 20.96, check voltage passed.
2021-09-15 04:46:06 uart.c:72:set_baud: set fpga_baud to 115200
2021-09-15 04:46:18 driver-btm-api.c:1134:check_asic_number_with_power_on: Chain[0]: find 38 asic, times 0
2021-09-15 04:46:29 driver-btm-api.c:1134:check_asic_number_with_power_on: Chain[0]: find 38 asic, times 1
2021-09-15 04:46:40 driver-btm-api.c:1134:check_asic_number_with_power_on: Chain[0]: find 38 asic, times 2
2021-09-15 04:46:40 power_api.c:380:modify_check_asic_voltage: check_asic_voltage_raw = 2100
chain 0, IO_DRIVE_STRENGTH_CONFIGURATION reg = 0x f1fffff
2021-09-15 04:46:49 driver-btm-api.c:1157:check_asic_number_with_power_on: Chain[0]: find 38 asic, times 3
2021-09-15 04:46:49 power_api.c:380:modify_check_asic_voltage: check_asic_voltage_raw = 2050
2021-09-15 04:46:49 power_api.c:364:set_to_check_asic_voltage_by_steps: Set to voltage raw 2050, step by step.
2021-09-15 04:46:52 power_api.c:85:check_voltage_multi: retry time: 0
2021-09-15 04:46:54 power_api.c:40:_get_avg_voltage: chain = 0, voltage = 20.496824
2021-09-15 04:46:55 power_api.c:40:_get_avg_voltage: chain = 1, voltage = 20.500638
2021-09-15 04:46:56 power_api.c:40:_get_avg_voltage: chain = 2, voltage = 20.472681
2021-09-15 04:46:56 power_api.c:53:_get_avg_voltage: average_voltage = 20.490048
2021-09-15 04:46:56 power_api.c:71:check_voltage: target_vol = 20.50, actural_vol = 20.49, check voltage passed.
chain 0, IO_DRIVE_STRENGTH_CONFIGURATION reg = 0x f1fffff
2021-09-15 04:47:05 driver-btm-api.c:1157:check_asic_number_with_power_on: Chain[0]: find 38 asic, times 4
2021-09-15 04:47:05 power_api.c:380:modify_check_asic_voltage: check_asic_voltage_raw = 2000
2021-09-15 04:47:05 power_api.c:364:set_to_check_asic_voltage_by_steps: Set to voltage raw 2000, step by step.
2021-09-15 04:47:08 power_api.c:85:check_voltage_multi: retry time: 0
2021-09-15 04:47:09 power_api.c:40:_get_avg_voltage: chain = 0, voltage = 19.964466
2021-09-15 04:47:10 power_api.c:40:_get_avg_voltage: chain = 1, voltage = 19.992357
2021-09-15 04:47:11 power_api.c:40:_get_avg_voltage: chain = 2, voltage = 19.965693
2021-09-15 04:47:11 power_api.c:53:_get_avg_voltage: average_voltage = 19.974172
2021-09-15 04:47:11 power_api.c:71:check_voltage: target_vol = 20.00, actural_vol = 19.97, check voltage passed.
chain 0, IO_DRIVE_STRENGTH_CONFIGURATION reg = 0x f1fffff
2021-09-15 04:47:20 driver-btm-api.c:1157:check_asic_number_with_power_on: Chain[0]: find 38 asic, times 5
2021-09-15 04:47:20 power_api.c:380:modify_check_asic_voltage: check_asic_voltage_raw = 2100
2021-09-15 04:47:20 power_api.c:364:set_to_check_asic_voltage_by_steps: Set to voltage raw 2100, step by step.
2021-09-15 04:47:25 power_api.c:85:check_voltage_multi: retry time: 0
2021-09-15 04:47:27 power_api.c:40:_get_avg_voltage: chain = 0, voltage = 20.979670
2021-09-15 04:47:28 power_api.c:40:_get_avg_voltage: chain = 1, voltage = 20.984714
2021-09-15 04:47:29 power_api.c:40:_get_avg_voltage: chain = 2, voltage = 20.928933
2021-09-15 04:47:29 power_api.c:53:_get_avg_voltage: average_voltage = 20.964439
2021-09-15 04:47:29 power_api.c:71:check_voltage: target_vol = 21.00, actural_vol = 20.96, check voltage passed.
2021-09-15 04:47:29 driver-btm-api.c:1193:check_asic_number: Chain 0 only find 38 asic, will power off hash board 0
2021-09-15 04:47:30 driver-btm-api.c:1195:check_asic_number: Chain 0 voltage: an0 = 2.806452, an2 2.803226, an6 2.541935.
2021-09-15 04:47:42 driver-btm-api.c:1134:check_asic_number_with_power_on: Chain[1]: find 0 asic, times 0
2021-09-15 04:47:53 driver-btm-api.c:1134:check_asic_number_with_power_on: Chain[1]: find 0 asic, times 1
2021-09-15 04:48:03 driver-btm-api.c:1134:check_asic_number_with_power_on: Chain[1]: find 0 asic, times 2
2021-09-15 04:48:03 power_api.c:380:modify_check_asic_voltage: check_asic_voltage_raw = 2100
chain 1, IO_DRIVE_STRENGTH_CONFIGURATION reg = 0x f1fffff
2021-09-15 04:48:12 driver-btm-api.c:1157:check_asic_number_with_power_on: Chain[1]: find 0 asic, times 3
2021-09-15 04:48:12 power_api.c:380:modify_check_asic_voltage: check_asic_voltage_raw = 2050
2021-09-15 04:48:12 power_api.c:364:set_to_check_asic_voltage_by_steps: Set to voltage raw 2050, step by step.
2021-09-15 04:48:16 power_api.c:85:check_voltage_multi: retry time: 0
2021-09-15 04:48:17 power_api.c:40:_get_avg_voltage: chain = 1, voltage = 20.474554
2021-09-15 04:48:18 power_api.c:40:_get_avg_voltage: chain = 2, voltage = 20.472681
2021-09-15 04:48:18 power_api.c:53:_get_avg_voltage: average_voltage = 20.473618
2021-09-15 04:48:18 power_api.c:71:check_voltage: target_vol = 20.50, actural_vol = 20.47, check voltage passed.
chain 1, IO_DRIVE_STRENGTH_CONFIGURATION reg = 0x f1fffff
2021-09-15 04:48:26 driver-btm-api.c:1157:check_asic_number_with_power_on: Chain[1]: find 0 asic, times 4
2021-09-15 04:48:26 power_api.c:380:modify_check_asic_voltage: check_asic_voltage_raw = 2000
2021-09-15 04:48:26 power_api.c:364:set_to_check_asic_voltage_by_steps: Set to voltage raw 2000, step by step.
2021-09-15 04:48:30 power_api.c:85:check_voltage_multi: retry time: 0
2021-09-15 04:48:31 power_api.c:40:_get_avg_voltage: chain = 1, voltage = 19.991094
2021-09-15 04:48:32 power_api.c:40:_get_avg_voltage: chain = 2, voltage = 19.989835
2021-09-15 04:48:32 power_api.c:53:_get_avg_voltage: average_voltage = 19.990464
2021-09-15 04:48:32 power_api.c:71:check_voltage: target_vol = 20.00, actural_vol = 19.99, check voltage passed.
chain 1, IO_DRIVE_STRENGTH_CONFIGURATION reg = 0x f1fffff
2021-09-15 04:48:41 driver-btm-api.c:1157:check_asic_number_with_power_on: Chain[1]: find 0 asic, times 5
2021-09-15 04:48:41 power_api.c:380:modify_check_asic_voltage: check_asic_voltage_raw = 2100
2021-09-15 04:48:41 power_api.c:364:set_to_check_asic_voltage_by_steps: Set to voltage raw 2100, step by step.
2021-09-15 04:48:46 power_api.c:85:check_voltage_multi: retry time: 0
2021-09-15 04:48:47 power_api.c:40:_get_avg_voltage: chain = 1, voltage = 20.958015
2021-09-15 04:48:48 power_api.c:40:_get_avg_voltage: chain = 2, voltage = 20.955528
2021-09-15 04:48:48 power_api.c:53:_get_avg_voltage: average_voltage = 20.956771
2021-09-15 04:48:48 power_api.c:71:check_voltage: target_vol = 21.00, actural_vol = 20.96, check voltage passed.
2021-09-15 04:48:48 driver-btm-api.c:1193:check_asic_number: Chain 1 only find 0 asic, will power off hash board 1
2021-09-15 04:48:49 driver-btm-api.c:1195:check_asic_number: Chain 1 voltage: an0 = 2.796774, an2 2.796774, an6 2.535484.
2021-09-15 04:49:01 driver-btm-api.c:1134:check_asic_number_with_power_on: Chain[2]: find 65 asic, times 0
2021-09-15 04:49:04 driver-hash-chip.c:266:set_uart_relay: set uart relay to 0x330003
2021-09-15 04:49:04 driver-btm-api.c:435:set_order_clock: chain[2]: set order clock, stragegy 3
2021-09-15 04:49:04 driver-hash-chip.c:502:set_clock_delay_control: core_data = 0x34
2021-09-15 04:49:04 driver-btm-api.c:1892:check_clock_counter: freq 50 clock_counter_limit 6
2021-09-15 04:49:04 voltage[2] = 1940
2021-09-15 04:49:04 power_api.c:226:set_working_voltage_raw: working_voltage_raw = 1940
2021-09-15 04:49:06 temperature.c:340:calibrate_temp_sensor_one_chain: chain 2 temp sensor NCT218
2021-09-15 04:49:06 uart.c:72:set_baud: set fpga_baud to 12000000
2021-09-15 04:49:06 driver-btm-api.c:293:check_bringup_temp: Bring up temperature is 27
2021-09-15 04:49:06 thread.c:1378:create_check_miner_status_thread: create thread
2021-09-15 04:49:06 thread.c:1368:create_show_miner_status_thread: create thread
2021-09-15 04:49:06 thread.c:1348:create_temperature_monitor_thread: create thread
2021-09-15 04:49:06 frequency.c:514:check_bringup_temp_dec_freq: dec freq = 0 when bringup temp = 27 dec_freq_index=0
2021-09-15 04:49:06 freq_tuning.c:183:freq_tuning_get_max_freq: Max freq of tuning is 650
2021-09-15 04:49:06 driver-btm-api.c:1765:send_null_work: [DEBUG] Send null work.
2021-09-15 04:49:06 thread.c:1338:create_asic_status_monitor_thread: create thread
2021-09-15 04:49:06 frequency.c:1110:inc_freq_with_fixed_vco: chain = 255, freq = 590, is_higher_voltage = true
2021-09-15 04:49:06 power_api.c:352:set_to_voltage_by_steps: Set to voltage raw 2090, step by step.
2021-09-15 04:49:08 power_api.c:85:check_voltage_multi: retry time: 0
2021-09-15 04:49:09 power_api.c:40:_get_avg_voltage: chain = 2, voltage = 20.832486
2021-09-15 04:49:09 power_api.c:53:_get_avg_voltage: average_voltage = 20.832486
2021-09-15 04:49:09 power_api.c:71:check_voltage: target_vol = 20.90, actural_vol = 20.83, check voltage passed.
2021-09-15 04:52:42 power_api.c:352:set_to_voltage_by_steps: Set to voltage raw 2080, step by step.
2021-09-15 04:52:44 power_api.c:85:check_voltage_multi: retry time: 0
2021-09-15 04:52:46 power_api.c:40:_get_avg_voltage: chain = 2, voltage = 20.663705
2021-09-15 04:52:46 power_api.c:53:_get_avg_voltage: average_voltage = 20.663705
2021-09-15 04:52:46 power_api.c:71:check_voltage: target_vol = 20.80, actural_vol = 20.66, check voltage passed.
2021-09-15 04:53:36 power_api.c:352:set_to_voltage_by_steps: Set to voltage raw 2030, step by step.
2021-09-15 04:53:38 power_api.c:85:check_voltage_multi: retry time: 0
2021-09-15 04:53:39 power_api.c:40:_get_avg_voltage: chain = 2, voltage = 20.205583
2021-09-15 04:53:39 power_api.c:53:_get_avg_voltage: average_voltage = 20.205583
2021-09-15 04:53:39 power_api.c:71:check_voltage: target_vol = 20.30, actural_vol = 20.21, check voltage passed.
2021-09-15 04:54:43 thread.c:1265:asic_status_monitor_thread: ERROR: chain 2 get hashrate_reg_counter 0, require 65, failed times 1
2021-09-15 04:54:43 temperature.c:843:get_temp_info: read temp sensor failed: chain = 2, sensor = 0, chip = 14, reg = 0
2021-09-15 04:54:44 temperature.c:843:get_temp_info: read temp sensor failed: chain = 2, sensor = 0, chip = 14, reg = 1
2021-09-15 04:54:44 temperature.c:843:get_temp_info: read temp sensor failed: chain = 2, sensor = 1, chip = 10, reg = 0
2021-09-15 04:54:44 thread.c:1293:asic_status_monitor_thread: chain 2 can't get enough hashrate reg val for 0 times.
2021-09-15 04:54:45 temperature.c:843:get_temp_info: read temp sensor failed: chain = 2, sensor = 1, chip = 10, reg = 1
2021-09-15 04:54:45 thread.c:1265:asic_status_monitor_thread: ERROR: chain 2 get hashrate_reg_counter 0, require 65, failed times 1
2021-09-15 04:54:45 temperature.c:843:get_temp_info: read temp sensor failed: chain = 2, sensor = 2, chip = 54, reg = 0
2021-09-15 04:54:45 temperature.c:843:get_temp_info: read temp sensor failed: chain = 2, sensor = 2, chip = 54, reg = 1
2021-09-15 04:54:46 temperature.c:843:get_temp_info: read temp sensor failed: chain = 2, sensor = 3, chip = 50, reg = 0
2021-09-15 04:54:46 temperature.c:843:get_temp_info: read temp sensor failed: chain = 2, sensor = 3, chip = 50, reg = 1
2021-09-15 04:54:46 temperature.c:875:get_temp_info: ERROR: chain 2 can get NONE temp info or temp value abnormal, power it off
2021-09-15 04:54:46 thread.c:1293:asic_status_monitor_thread: chain 2 can't get enough hashrate reg val for 1 times.
2021-09-15 04:54:47 thread.c:1265:asic_status_monitor_thread: ERROR: chain 2 get hashrate_reg_counter 0, require 65, failed times 1
2021-09-15 04:54:48 driver-btm-api.c:222:set_miner_status: ERROR_TEMP_LOST
2021-09-15 04:54:48 driver-btm-api.c:156:stop_mining: stop mining: no chain exists, maybe caused by sensor lost
2021-09-15 04:54:48 thread.c:1419:cancel_check_miner_status_thread: cancel thread
2021-09-15 04:54:48 thread.c:1403:cancel_read_nonce_reg_thread: cancel thread
2021-09-15 04:54:48 thread.c:1343:cancel_asic_status_monitor_thread: cancel thread
2021-09-15 04:54:48 driver-btm-api.c:141:killall_hashboard: *power off hashboard*
2021-09-15 04:56:03 power_api.c:352:set_to_voltage_by_steps: Set to voltage raw 2020, step by step.
2021-09-15 04:56:04 power_api.c:85:check_voltage_multi: retry time: 0
2021-09-15 04:56:04 power_api.c:46:_get_avg_voltage: No chain exist.
2021-09-15 04:56:04 power_api.c:53:_get_avg_voltage: average_voltage = 0.000000
2021-09-15 04:56:04 power_api.c:66:check_voltage: target_vol = 20.20, actural_vol = 0.00, more than 1.0v diff.
2021-09-15 04:56:05 power_api.c:85:check_voltage_multi: retry time: 1
2021-09-15 04:56:05 power_api.c:46:_get_avg_voltage: No chain exist.
2021-09-15 04:56:05 power_api.c:53:_get_avg_voltage: average_voltage = 0.000000
2021-09-15 04:56:05 power_api.c:66:check_voltage: target_vol = 20.20, actural_vol = 0.00, more than 1.0v diff.
2021-09-15 04:56:06 power_api.c:85:check_voltage_multi: retry time: 2
2021-09-15 04:56:06 power_api.c:46:_get_avg_voltage: No chain exist.
2021-09-15 04:56:06 power_api.c:53:_get_avg_voltage: average_voltage = 0.000000
2021-09-15 04:56:06 power_api.c:66:check_voltage: target_vol = 20.20, actural_vol = 0.00, more than 1.0v diff.
2021-09-15 04:56:07 power_api.c:85:check_voltage_multi: retry time: 3
2021-09-15 04:56:07 power_api.c:46:_get_avg_voltage: No chain exist.
2021-09-15 04:56:07 power_api.c:53:_get_avg_voltage: average_voltage = 0.000000
2021-09-15 04:56:07 power_api.c:66:check_voltage: target_vol = 20.20, actural_vol = 0.00, more than 1.0v diff.
2021-09-15 04:56:08 power_api.c:85:check_voltage_multi: retry time: 4
2021-09-15 04:56:08 power_api.c:46:_get_avg_voltage: No chain exist.
2021-09-15 04:56:08 power_api.c:53:_get_avg_voltage: average_voltage = 0.000000
2021-09-15 04:56:08 power_api.c:66:check_voltage: target_vol = 20.20, actural_vol = 0.00, more than 1.0v diff.
2021-09-15 04:56:09 power_api.c:85:check_voltage_multi: retry time: 5
2021-09-15 04:56:09 power_api.c:46:_get_avg_voltage: No chain exist.
2021-09-15 04:56:09 power_api.c:53:_get_avg_voltage: average_voltage = 0.000000
2021-09-15 04:56:09 power_api.c:66:check_voltage: target_vol = 20.20, actural_vol = 0.00, more than 1.0v diff.
2021-09-15 04:56:10 power_api.c:85:check_voltage_multi: retry time: 6
2021-09-15 04:56:10 power_api.c:46:_get_avg_voltage: No chain exist.
2021-09-15 04:56:10 power_api.c:53:_get_avg_voltage: average_voltage = 0.000000
2021-09-15 04:56:10 power_api.c:66:check_voltage: target_vol = 20.20, actural_vol = 0.00, more than 1.0v diff.
2021-09-15 04:56:11 power_api.c:85:check_voltage_multi: retry time: 7
2021-09-15 04:56:11 power_api.c:46:_get_avg_voltage: No chain exist.
2021-09-15 04:56:11 power_api.c:53:_get_avg_voltage: average_voltage = 0.000000
2021-09-15 04:56:11 power_api.c:66:check_voltage: target_vol = 20.20, actural_vol = 0.00, more than 1.0v diff.
2021-09-15 04:56:12 power_api.c:85:check_voltage_multi: retry time: 8
2021-09-15 04:56:12 power_api.c:46:_get_avg_voltage: No chain exist.
2021-09-15 04:56:12 power_api.c:53:_get_avg_voltage: average_voltage = 0.000000
2021-09-15 04:56:12 power_api.c:66:check_voltage: target_vol = 20.20, actural_vol = 0.00, more than 1.0v diff.
2021-09-15 04:56:13 power_api.c:85:check_voltage_multi: retry time: 9
2021-09-15 04:56:13 power_api.c:46:_get_avg_voltage: No chain exist.
2021-09-15 04:56:13 power_api.c:53:_get_avg_voltage: average_voltage = 0.000000
2021-09-15 04:56:13 power_api.c:66:check_voltage: target_vol = 20.20, actural_vol = 0.00, more than 1.0v diff.
2021-09-15 04:56:14 power_api.c:85:check_voltage_multi: retry time: 10
2021-09-15 04:56:14 power_api.c:46:_get_avg_voltage: No chain exist.
2021-09-15 04:56:14 power_api.c:53:_get_avg_voltage: average_voltage = 0.000000
2021-09-15 04:56:14 power_api.c:66:check_voltage: target_vol = 20.20, actural_vol = 0.00, more than 1.0v diff.
2021-09-15 04:56:15 power_api.c:85:check_voltage_multi: retry time: 11
2021-09-15 04:56:15 power_api.c:46:_get_avg_voltage: No chain exist.
2021-09-15 04:56:15 power_api.c:53:_get_avg_voltage: average_voltage = 0.000000
2021-09-15 04:56:15 power_api.c:66:check_voltage: target_vol = 20.20, actural_vol = 0.00, more than 1.0v diff.
2021-09-15 04:56:16 power_api.c:85:check_voltage_multi: retry time: 12
2021-09-15 04:56:16 power_api.c:46:_get_avg_voltage: No chain exist.
2021-09-15 04:56:16 power_api.c:53:_get_avg_voltage: average_voltage = 0.000000
2021-09-15 04:56:16 power_api.c:66:check_voltage: target_vol = 20.20, actural_vol = 0.00, more than 1.0v diff.
2021-09-15 04:56:17 power_api.c:85:check_voltage_multi: retry time: 13
2021-09-15 04:56:17 power_api.c:46:_get_avg_voltage: No chain exist.
2021-09-15 04:56:17 power_api.c:53:_get_avg_voltage: average_voltage = 0.000000
2021-09-15 04:56:17 power_api.c:66:check_voltage: target_vol = 20.20, actural_vol = 0.00, more than 1.0v diff.
2021-09-15 04:56:18 power_api.c:85:check_voltage_multi: retry time: 14
2021-09-15 04:56:18 power_api.c:46:_get_avg_voltage: No chain exist.
2021-09-15 04:56:18 power_api.c:53:_get_avg_voltage: average_voltage = 0.000000
2021-09-15 04:56:18 power_api.c:66:check_voltage: target_vol = 20.20, actural_vol = 0.00, more than 1.0v diff.
2021-09-15 04:56:19 power_api.c:85:check_voltage_multi: retry time: 15
2021-09-15 04:56:19 power_api.c:46:_get_avg_voltage: No chain exist.
2021-09-15 04:56:19 power_api.c:53:_get_avg_voltage: average_voltage = 0.000000
2021-09-15 04:56:19 power_api.c:66:check_voltage: target_vol = 20.20, actural_vol = 0.00, more than 1.0v diff.
2021-09-15 04:56:20 power_api.c:85:check_voltage_multi: retry time: 16
2021-09-15 04:56:20 power_api.c:46:_get_avg_voltage: No chain exist.
2021-09-15 04:56:20 power_api.c:53:_get_avg_voltage: average_voltage = 0.000000
2021-09-15 04:56:20 power_api.c:66:check_voltage: target_vol = 20.20, actural_vol = 0.00, more than 1.0v diff.
2021-09-15 04:56:21 power_api.c:85:check_voltage_multi: retry time: 17
2021-09-15 04:56:21 power_api.c:46:_get_avg_voltage: No chain exist.
2021-09-15 04:56:21 power_api.c:53:_get_avg_voltage: average_voltage = 0.000000
2021-09-15 04:56:21 power_api.c:66:check_voltage: target_vol = 20.20, actural_vol = 0.00, more than 1.0v diff.
2021-09-15 04:56:22 power_api.c:85:check_voltage_multi: retry time: 18
2021-09-15 04:56:22 power_api.c:46:_get_avg_voltage: No chain exist.
2021-09-15 04:56:22 power_api.c:53:_get_avg_voltage: average_voltage = 0.000000
2021-09-15 04:56:22 power_api.c:66:check_voltage: target_vol = 20.20, actural_vol = 0.00, more than 1.0v diff.
2021-09-15 04:56:23 power_api.c:85:check_voltage_multi: retry time: 19
2021-09-15 04:56:23 power_api.c:46:_get_avg_voltage: No chain exist.
2021-09-15 04:56:23 power_api.c:53:_get_avg_voltage: average_voltage = 0.000000
2021-09-15 04:56:23 power_api.c:66:check_voltage: target_vol = 20.20, actural_vol = 0.00, more than 1.0v diff.
2021-09-15 04:56:24 power_api.c:85:check_voltage_multi: retry time: 20
2021-09-15 04:56:24 power_api.c:46:_get_avg_voltage: No chain exist.
2021-09-15 04:56:24 power_api.c:53:_get_avg_voltage: average_voltage = 0.000000
2021-09-15 04:56:24 power_api.c:66:check_voltage: target_vol = 20.20, actural_vol = 0.00, more than 1.0v diff.
2021-09-15 04:56:25 power_api.c:85:check_voltage_multi: retry time: 21
2021-09-15 04:56:25 power_api.c:46:_get_avg_voltage: No chain exist.
2021-09-15 04:56:25 power_api.c:53:_get_avg_voltage: average_voltage = 0.000000
2021-09-15 04:56:25 power_api.c:66:check_voltage: target_vol = 20.20, actural_vol = 0.00, more than 1.0v diff.
2021-09-15 04:56:26 power_api.c:85:check_voltage_multi: retry time: 22
2021-09-15 04:56:26 power_api.c:46:_get_avg_voltage: No chain exist.
2021-09-15 04:56:26 power_api.c:53:_get_avg_voltage: average_voltage = 0.000000
2021-09-15 04:56:26 power_api.c:66:check_voltage: target_vol = 20.20, actural_vol = 0.00, more than 1.0v diff.
2021-09-15 04:56:27 power_api.c:85:check_voltage_multi: retry time: 23
2021-09-15 04:56:27 power_api.c:46:_get_avg_voltage: No chain exist.
2021-09-15 04:56:27 power_api.c:53:_get_avg_voltage: average_voltage = 0.000000
2021-09-15 04:56:27 power_api.c:66:check_voltage: target_vol = 20.20, actural_vol = 0.00, more than 1.0v diff.
2021-09-15 04:56:28 power_api.c:85:check_voltage_multi: retry time: 24
2021-09-15 04:56:28 power_api.c:46:_get_avg_voltage: No chain exist.
2021-09-15 04:56:28 power_api.c:53:_get_avg_voltage: average_voltage = 0.000000
2021-09-15 04:56:28 power_api.c:66:check_voltage: target_vol = 20.20, actural_vol = 0.00, more than 1.0v diff.
2021-09-15 04:56:29 power_api.c:85:check_voltage_multi: retry time: 25
2021-09-15 04:56:29 power_api.c:46:_get_avg_voltage: No chain exist.
2021-09-15 04:56:29 power_api.c:53:_get_avg_voltage: average_voltage = 0.000000
2021-09-15 04:56:29 power_api.c:66:check_voltage: target_vol = 20.20, actural_vol = 0.00, more than 1.0v diff.
2021-09-15 04:56:30 power_api.c:85:check_voltage_multi: retry time: 26
2021-09-15 04:56:30 power_api.c:46:_get_avg_voltage: No chain exist.
2021-09-15 04:56:30 power_api.c:53:_get_avg_voltage: average_voltage = 0.000000
2021-09-15 04:56:30 power_api.c:66:check_voltage: target_vol = 20.20, actural_vol = 0.00, more than 1.0v diff.
2021-09-15 04:56:31 power_api.c:85:check_voltage_multi: retry time: 27
2021-09-15 04:56:31 power_api.c:46:_get_avg_voltage: No chain exist.
2021-09-15 04:56:31 power_api.c:53:_get_avg_voltage: average_voltage = 0.000000
2021-09-15 04:56:31 power_api.c:66:check_voltage: target_vol = 20.20, actural_vol = 0.00, more than 1.0v diff.
2021-09-15 04:56:32 power_api.c:85:check_voltage_multi: retry time: 28
2021-09-15 04:56:32 power_api.c:46:_get_avg_voltage: No chain exist.
2021-09-15 04:56:32 power_api.c:53:_get_avg_voltage: average_voltage = 0.000000
2021-09-15 04:56:32 power_api.c:66:check_voltage: target_vol = 20.20, actural_vol = 0.00, more than 1.0v diff.
2021-09-15 04:56:33 power_api.c:85:check_voltage_multi: retry time: 29
2021-09-15 04:56:33 power_api.c:46:_get_avg_voltage: No chain exist.
2021-09-15 04:56:33 power_api.c:53:_get_avg_voltage: average_voltage = 0.000000
2021-09-15 04:56:33 power_api.c:66:check_voltage: target_vol = 20.20, actural_vol = 0.00, more than 1.0v diff.
2021-09-15 04:56:34 driver-btm-api.c:222:set_miner_status: ERROR_POWER_LOST
2021-09-15 04:56:34 driver-btm-api.c:156:stop_mining: stop mining: power set failed!
2021-09-15 04:56:34 thread.c:1388:cancel_temperature_monitor_thread: cancel thread
2021-09-15 04:56:34 driver-btm-api.c:141:killall_hashboard: *power off hashboard*

0

• Official comment

  

  Nick

  • September 16, 2021 06:35

  Dear

  Could you firstly change a psu to test it firstly?

  Comment actions Permalink
• 

  Alban Halilaga

  • September 16, 2021 07:07

  I dont have another psu, because this is my first miner.

  0

  Comment actions Permalink
• 

  Nick

  • September 17, 2021 03:29

  Dear

  Please unplug and plug the power line again to double check ,

  For the hashboard which can not be detected ,please try to exclude the issues by the below instructions
  1 Check the wire line for the hashboard,- unplug and plug them again to test.,
  2.Upgrade to the latest firmware 
  3. Change the PSU to try it and reset the miner to the factory settings
  4.Flash the SD card program to recover the control board
  Please download the SD card file in the below link

  https://service.bitmain.com/support/download?product=Flashing%20SD%20card%20with%20image

   

  0

  Comment actions Permalink
• 

  Alban Halilaga

  • September 18, 2021 09:31

  Hello, i reset the miner but the problem is still there, i upgrated to the latest firmware and happend this, for some moments the green light was on, but the miner was working only with one hashboard than the redlight turned on.

  Here is the complete log.

  Please help!

   

   

  Booting Linux on physical CPU 0x0
  Linux version 4.6.0-xilinx-gff8137b-dirty (lzq@armdev2) (gcc version 4.8.3 20140320 (prerelease) (Sourcery CodeBench Lite 2014.05-23) ) #25 SMP PREEMPT Fri Nov 23 15:30:52 CST 2018
  CPU: ARMv7 Processor [413fc090] revision 0 (ARMv7), cr=18c5387d
  CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
  Machine model: Xilinx Zynq
  cma: Reserved 16 MiB at 0x0e000000
  Memory policy: Data cache writealloc
  On node 0 totalpages: 61440
  free_area_init_node: node 0, pgdat c0b39280, node_mem_map cde10000
  Normal zone: 480 pages used for memmap
  Normal zone: 0 pages reserved
  Normal zone: 61440 pages, LIFO batch:15
  percpu: Embedded 12 pages/cpu @cddf1000 s19776 r8192 d21184 u49152
  pcpu-alloc: s19776 r8192 d21184 u49152 alloc=12*4096
  pcpu-alloc: [0] 0 [0] 1
  Built 1 zonelists in Zone order, mobility grouping on. Total pages: 60960
  Kernel command line: mem=240M console=ttyPS0,115200 ramdisk_size=33554432 root=/dev/ram rw earlyprintk
  PID hash table entries: 1024 (order: 0, 4096 bytes)
  Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
  Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
  Memory: 203432K/245760K available (6345K kernel code, 231K rwdata, 1896K rodata, 1024K init, 223K bss, 25944K reserved, 16384K cma-reserved, 0K highmem)
  Virtual kernel memory layout:
  vector : 0xffff0000 - 0xffff1000 ( 4 kB)
  fixmap : 0xffc00000 - 0xfff00000 (3072 kB)
  vmalloc : 0xcf800000 - 0xff800000 ( 768 MB)
  lowmem : 0xc0000000 - 0xcf000000 ( 240 MB)
  pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
  modules : 0xbf000000 - 0xbfe00000 ( 14 MB)
  .text : 0xc0008000 - 0xc090c424 (9234 kB)
  .init : 0xc0a00000 - 0xc0b00000 (1024 kB)
  .data : 0xc0b00000 - 0xc0b39fe0 ( 232 kB)
  .bss : 0xc0b39fe0 - 0xc0b71c28 ( 224 kB)
  Preemptible hierarchical RCU implementation.
  Build-time adjustment of leaf fanout to 32.
  RCU restricting CPUs from NR_CPUS=4 to nr_cpu_ids=2.
  RCU: Adjusting geometry for rcu_fanout_leaf=32, nr_cpu_ids=2
  NR_IRQS:16 nr_irqs:16 16
  efuse mapped to cf800000
  ps7-slcr mapped to cf802000
  L2C: platform modifies aux control register: 0x72360000 -> 0x72760000
  L2C: DT/platform modifies aux control register: 0x72360000 -> 0x72760000
  L2C-310 erratum 769419 enabled
  L2C-310 enabling early BRESP for Cortex-A9
  L2C-310 full line of zeros enabled for Cortex-A9
  L2C-310 ID prefetch enabled, offset 1 lines
  L2C-310 dynamic clock gating enabled, standby mode enabled
  L2C-310 cache controller enabled, 8 ways, 512 kB
  L2C-310: CACHE_ID 0x410000c8, AUX_CTRL 0x76760001
  zynq_clock_init: clkc starts at cf802100
  Zynq clock init
  sched_clock: 64 bits at 333MHz, resolution 3ns, wraps every 4398046511103ns
  clocksource: arm_global_timer: mask: 0xffffffffffffffff max_cycles: 0x4ce07af025, max_idle_ns: 440795209040 ns
  Switching to timer-based delay loop, resolution 3ns
  clocksource: ttc_clocksource: mask: 0xffff max_cycles: 0xffff, max_idle_ns: 537538477 ns
  ps7-ttc #0 at cf80a000, irq=18
  Console: colour dummy device 80x30
  Calibrating delay loop (skipped), value calculated using timer frequency.. 666.66 BogoMIPS (lpj=3333333)
  pid_max: default: 32768 minimum: 301
  Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
  Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
  CPU: Testing write buffer coherency: ok
  CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
  Setting up static identity map for 0x100000 - 0x100058
  CPU1: failed to boot: -1
  Brought up 1 CPUs
  SMP: Total of 1 processors activated (666.66 BogoMIPS).
  CPU: All CPU(s) started in SVC mode.
  devtmpfs: initialized
  VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 4
  clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
  pinctrl core: initialized pinctrl subsystem
  NET: Registered protocol family 16
  DMA: preallocated 256 KiB pool for atomic coherent allocations
  cpuidle: using governor menu
  hw-breakpoint: found 5 (+1 reserved) breakpoint and 1 watchpoint registers.
  hw-breakpoint: maximum watchpoint size is 4 bytes.
  zynq-ocm f800c000.ps7-ocmc: ZYNQ OCM pool: 256 KiB @ 0xcf880000
  vgaarb: loaded
  SCSI subsystem initialized
  usbcore: registered new interface driver usbfs
  usbcore: registered new interface driver hub
  usbcore: registered new device driver usb
  media: Linux media interface: v0.10
  Linux video capture interface: v2.00
  pps_core: LinuxPPS API ver. 1 registered
  pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
  PTP clock support registered
  EDAC MC: Ver: 3.0.0
  Advanced Linux Sound Architecture Driver Initialized.
  clocksource: Switched to clocksource arm_global_timer
  NET: Registered protocol family 2
  TCP established hash table entries: 2048 (order: 1, 8192 bytes)
  TCP bind hash table entries: 2048 (order: 2, 16384 bytes)
  TCP: Hash tables configured (established 2048 bind 2048)
  UDP hash table entries: 256 (order: 1, 8192 bytes)
  UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
  NET: Registered protocol family 1
  RPC: Registered named UNIX socket transport module.
  RPC: Registered udp transport module.
  RPC: Registered tcp transport module.
  RPC: Registered tcp NFSv4.1 backchannel transport module.
  PCI: CLS 0 bytes, default 64
  Trying to unpack rootfs image as initramfs...
  rootfs image is not initramfs (no cpio magic); looks like an initrd
  Freeing initrd memory: 12904K (cce67000 - cdb01000)
  hw perfevents: enabled with armv7_cortex_a9 PMU driver, 7 counters available
  futex hash table entries: 512 (order: 3, 32768 bytes)
  workingset: timestamp_bits=28 max_order=16 bucket_order=0
  jffs2: version 2.2. (NAND) (SUMMARY) © 2001-2006 Red Hat, Inc.
  io scheduler noop registered
  io scheduler deadline registered
  io scheduler cfq registered (default)
  dma-pl330 f8003000.ps7-dma: Loaded driver for PL330 DMAC-241330
  dma-pl330 f8003000.ps7-dma: DBUFF-128x8bytes Num_Chans-8 Num_Peri-4 Num_Events-16
  e0000000.serial: ttyPS0 at MMIO 0xe0000000 (irq = 158, base_baud = 6249999) is a xuartps
  console [ttyPS0] enabled
  xdevcfg f8007000.ps7-dev-cfg: ioremap 0xf8007000 to cf86e000
  [drm] Initialized drm 1.1.0 20060810
  brd: module loaded
  loop: module loaded
  CAN device driver interface
  gpiod_set_value: invalid GPIO
  libphy: MACB_mii_bus: probed
  macb e000b000.ethernet eth0: Cadence GEM rev 0x00020118 at 0xe000b000 irq 31 (00:0a:35:00:00:00)
  Generic PHY e000b000.etherne:00: attached PHY driver [Generic PHY] (mii_bus:phy_addr=e000b000.etherne:00, irq=-1)
  e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k
  e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
  ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
  ehci-pci: EHCI PCI platform driver
  usbcore: registered new interface driver usb-storage
  mousedev: PS/2 mouse device common for all mice
  i2c /dev entries driver
  Xilinx Zynq CpuIdle Driver started
  sdhci: Secure Digital Host Controller Interface driver
  sdhci: Copyright(c) Pierre Ossman
  sdhci-pltfm: SDHCI platform and OF driver helper
  mmc0: SDHCI controller on e0100000.ps7-sdio [e0100000.ps7-sdio] using ADMA
  ledtrig-cpu: registered to indicate activity on CPUs
  usbcore: registered new interface driver usbhid
  usbhid: USB HID core driver
  nand: device found, Manufacturer ID: 0x2c, Chip ID: 0xda
  nand: Micron MT29F2G08ABAEAWP
  nand: 256 MiB, SLC, erase size: 128 KiB, page size: 2048, OOB size: 64
  nand: WARNING: pl35x-nand: the ECC used on your system is too weak compared to the one required by the NAND chip
  Bad block table found at page 131008, version 0x01
  Bad block table found at page 130944, version 0x01
  6 ofpart partitions found on MTD device pl35x-nand
  Creating 6 MTD partitions on "pl35x-nand":
  0x000000000000-0x000002800000 : "BOOT.bin-env-dts-kernel"
  0x000002800000-0x000004800000 : "ramfs"
  0x000004800000-0x000005000000 : "configs"
  0x000005000000-0x000006000000 : "reserve"
  0x000006000000-0x000008000000 : "ramfs-bak"
  0x000008000000-0x000010000000 : "reserve1"
  NET: Registered protocol family 10
  sit: IPv6 over IPv4 tunneling driver
  NET: Registered protocol family 17
  can: controller area network core (rev 20120528 abi 9)
  NET: Registered protocol family 29
  can: raw protocol (rev 20120528)
  can: broadcast manager protocol (rev 20120528 t)
  can: netlink gateway (rev 20130117) max_hops=1
  zynq_pm_ioremap: no compatible node found for 'xlnx,zynq-ddrc-a05'
  zynq_pm_late_init: Unable to map DDRC IO memory.
  Registering SWP/SWPB emulation handler
  hctosys: unable to open rtc device (rtc0)
  ALSA device list:
  No soundcards found.
  RAMDISK: gzip image found at block 0
  EXT4-fs (ram0): couldn't mount as ext3 due to feature incompatibilities
  EXT4-fs (ram0): mounted filesystem without journal. Opts: (null)
  VFS: Mounted root (ext4 filesystem) on device 1:0.
  devtmpfs: mounted
  Freeing unused kernel memory: 1024K (c0a00000 - c0b00000)
  EXT4-fs (ram0): re-mounted. Opts: block_validity,delalloc,barrier,user_xattr
  random: dd urandom read with 0 bits of entropy available
  ubi0: attaching mtd2
  ubi0: scanning is finished
  ubi0: attached mtd2 (name "configs", size 8 MiB)
  ubi0: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes
  ubi0: min./max. I/O unit sizes: 2048/2048, sub-page size 2048
  ubi0: VID header offset: 2048 (aligned 2048), data offset: 4096
  ubi0: good PEBs: 64, bad PEBs: 0, corrupted PEBs: 0
  ubi0: user volume: 1, internal volumes: 1, max. volumes count: 128
  ubi0: max/mean erase counter: 18/9, WL threshold: 4096, image sequence number: 385662122
  ubi0: available PEBs: 0, total reserved PEBs: 64, PEBs reserved for bad PEB handling: 40
  ubi0: background thread "ubi_bgt0d" started, PID 708
  UBIFS (ubi0:0): background thread "ubifs_bgt0_0" started, PID 711
  UBIFS (ubi0:0): UBIFS: mounted UBI device 0, volume 0, name "configs"
  UBIFS (ubi0:0): LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
  UBIFS (ubi0:0): FS size: 1396736 bytes (1 MiB, 11 LEBs), journal size 888833 bytes (0 MiB, 5 LEBs)
  UBIFS (ubi0:0): reserved for root: 65970 bytes (64 KiB)
  UBIFS (ubi0:0): media format: w4/r0 (latest is w4/r0), UUID 96E975B5-D709-4F7A-91F3-63688D81218B, small LPT model
  ubi1: attaching mtd5
  ubi1: scanning is finished
  ubi1: attached mtd5 (name "reserve1", size 128 MiB)
  ubi1: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes
  ubi1: min./max. I/O unit sizes: 2048/2048, sub-page size 2048
  ubi1: VID header offset: 2048 (aligned 2048), data offset: 4096
  ubi1: good PEBs: 1020, bad PEBs: 4, corrupted PEBs: 0
  ubi1: user volume: 1, internal volumes: 1, max. volumes count: 128
  ubi1: max/mean erase counter: 10186/8063, WL threshold: 4096, image sequence number: 770410698
  ubi1: available PEBs: 0, total reserved PEBs: 1020, PEBs reserved for bad PEB handling: 36
  ubi1: background thread "ubi_bgt1d" started, PID 720
  UBIFS (ubi1:0): background thread "ubifs_bgt1_0" started, PID 723
  UBIFS (ubi1:0): UBIFS: mounted UBI device 1, volume 0, name "reserve1"
  UBIFS (ubi1:0): LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
  UBIFS (ubi1:0): FS size: 123039744 bytes (117 MiB, 969 LEBs), journal size 6221824 bytes (5 MiB, 49 LEBs)
  UBIFS (ubi1:0): reserved for root: 4952683 bytes (4836 KiB)
  UBIFS (ubi1:0): media format: w4/r0 (latest is w4/r0), UUID 2ED272CE-54AF-4265-9559-65B9A89C2067, small LPT model
  IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
  IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
  macb e000b000.ethernet eth0: unable to generate target frequency: 25000000 Hz
  macb e000b000.ethernet eth0: link up (100/Full)
  IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
  In axi fpga driver!
  request_mem_region OK!
  AXI fpga dev virtual address is 0xcfb38000
  *base_vir_addr = 0xb023
  In fpga mem driver!
  request_mem_region OK!
  fpga mem virtual address is 0xd2000000
  random: nonblocking pool is initialized
  2021-09-18 08:40:58 driver-btm-api.c:779:init_freq_mode: This is scan-user version
  2021-09-18 08:40:58 driver-btm-api.c:2451:bitmain_soc_init: opt_multi_version = 1
  2021-09-18 08:40:58 driver-btm-api.c:2452:bitmain_soc_init: opt_bitmain_ab = 1
  2021-09-18 08:40:58 driver-btm-api.c:2453:bitmain_soc_init: opt_bitmain_work_mode = 0
  2021-09-18 08:40:58 driver-btm-api.c:2454:bitmain_soc_init: Miner compile time: Tue Jun 2 10:31:07 CST 2020 type: Antminer S17+
  2021-09-18 08:40:58 driver-btm-api.c:2455:bitmain_soc_init: commit version: 1ca50a5 2020-06-01 18:51:22, build by: lol 2020-06-02 10:37:21
  2021-09-18 08:40:58 driver-btm-api.c:2083:show_sn: len:16, 81506cc42b104814
  2021-09-18 08:40:58 driver-btm-api.c:2461:bitmain_soc_init: show sn return 1
  2021-09-18 08:40:58 driver-btm-api.c:2103:handle_sn_for_factory_mode: show sn return 1
  2021-09-18 08:40:58 driver-btm-api.c:2141:handle_sn_for_factory_mode: read sn success, 81506cc42b104814
  2021-09-18 08:40:58 fan.c:284:front_fan_power_on: Note: front fan is power on!
  2021-09-18 08:40:58 fan.c:296:rear_fan_power_on: Note: rear fan is power on!
  2021-09-18 08:40:58 driver-btm-api.c:1314:miner_device_init: Detect 256MB control board of XILINX
  2021-09-18 08:40:58 driver-btm-api.c:1255:init_fan_parameter: fan_eft : 0 fan_pwm : 0
  2021-09-18 08:41:04 driver-btm-api.c:1239:init_miner_version: miner ID : 81506cc42b104814
  2021-09-18 08:41:04 driver-btm-api.c:1245:init_miner_version: FPGA Version = 0xB023
  2021-09-18 08:41:10 driver-btm-api.c:837:get_product_id: product_id[0] = 0
  2021-09-18 08:41:10 driver-btm-api.c:837:get_product_id: product_id[1] = 0
  2021-09-18 08:41:10 driver-btm-api.c:837:get_product_id: product_id[2] = 0
  2021-09-18 08:41:10 driver-btm-api.c:2234:update_conf_by_power_feedback: Power feedback is disabled
  2021-09-18 08:41:10 driver-btm-api.c:2202:get_calibration_voltage: calibration voltage flag is error data.
  2021-09-18 08:41:10 driver-btm-api.c:2268:update_conf_by_power_feedback: Note: no calibration voltage, default diff = 0
  2021-09-18 08:41:10 frequency.c:1457:adjust_higer_max_vol_table: adjust_higer_max_vol_table, adjust_vol = 0
  2021-09-18 08:41:10 thread.c:1363:create_read_nonce_reg_thread: create thread
  2021-09-18 08:41:16 driver-btm-api.c:1239:init_miner_version: miner ID : 81506cc42b104814
  2021-09-18 08:41:16 driver-btm-api.c:1245:init_miner_version: FPGA Version = 0xB023
  2021-09-18 08:41:21 driver-btm-api.c:837:get_product_id: product_id[0] = 0
  2021-09-18 08:41:21 driver-btm-api.c:837:get_product_id: product_id[1] = 0
  2021-09-18 08:41:21 driver-btm-api.c:837:get_product_id: product_id[2] = 0
  2021-09-18 08:41:21 driver-btm-api.c:792:_set_project_type: project:0
  2021-09-18 08:41:21 driver-btm-api.c:813:_set_project_type: Project type: Antminer S17+
  2021-09-18 08:41:21 driver-btm-api.c:824:dump_pcb_bom_version: Chain [0] PCB Version: 0x0100
  2021-09-18 08:41:21 driver-btm-api.c:825:dump_pcb_bom_version: Chain [0] BOM Version: 0x0100
  2021-09-18 08:41:21 driver-btm-api.c:824:dump_pcb_bom_version: Chain [1] PCB Version: 0x0100
  2021-09-18 08:41:21 driver-btm-api.c:825:dump_pcb_bom_version: Chain [1] BOM Version: 0x0100
  2021-09-18 08:41:21 driver-btm-api.c:824:dump_pcb_bom_version: Chain [2] PCB Version: 0x0100
  2021-09-18 08:41:21 driver-btm-api.c:825:dump_pcb_bom_version: Chain [2] BOM Version: 0x0100
  2021-09-18 08:41:21 driver-btm-api.c:2372:bitmain_board_init: Fan check passed.
  2021-09-18 08:41:29 driver-btm-api.c:409:init_pic: Chain[0] PIC init failed!
  2021-09-18 08:41:29 driver-btm-api.c:222:set_miner_status: ERROR_PIC_LOST
  2021-09-18 08:41:29 board.c:36:jump_and_app_check_restore_pic: chain[0] PIC jump to app
  2021-09-18 08:41:46 board.c:40:jump_and_app_check_restore_pic: Check chain[0] PIC fw version=0xff
  2021-09-18 08:41:47 board.c:36:jump_and_app_check_restore_pic: chain[1] PIC jump to app
  2021-09-18 08:41:49 board.c:40:jump_and_app_check_restore_pic: Check chain[1] PIC fw version=0x88
  2021-09-18 08:41:50 board.c:36:jump_and_app_check_restore_pic: chain[2] PIC jump to app
  2021-09-18 08:41:52 board.c:40:jump_and_app_check_restore_pic: Check chain[2] PIC fw version=0x88
  2021-09-18 08:41:52 thread.c:1358:create_pic_heart_beat_thread: create thread
  2021-09-18 08:41:52 power_api.c:213:power_init: Power init:
  2021-09-18 08:41:52 power_api.c:214:power_init: current_voltage_raw = 0
  2021-09-18 08:41:52 power_api.c:215:power_init: highest_voltage_raw = 2100
  2021-09-18 08:41:52 power_api.c:216:power_init: working_voltage_raw = 1950
  2021-09-18 08:41:52 power_api.c:217:power_init: higher_voltage_raw = 2040
  2021-09-18 08:41:52 power_api.c:218:power_init: check_asic_voltage_raw = 2100
  2021-09-18 08:41:52 driver-btm-api.c:2382:bitmain_board_init: Enter 30s sleep to make sure power release finish.
  2021-09-18 08:41:52 power_api.c:186:power_off: init gpio907
  2021-09-18 08:42:24 power_api.c:324:set_to_highest_voltage_by_steps: Set to voltage raw 2100, step by step.
  2021-09-18 08:42:50 power_api.c:85:check_voltage_multi: retry time: 0
  2021-09-18 08:42:51 power_api.c:40:_get_avg_voltage: chain = 1, voltage = 21.008918
  2021-09-18 08:42:52 power_api.c:40:_get_avg_voltage: chain = 2, voltage = 20.979670
  2021-09-18 08:42:52 power_api.c:53:_get_avg_voltage: average_voltage = 20.994294
  2021-09-18 08:42:52 power_api.c:71:check_voltage: target_vol = 21.00, actural_vol = 20.99, check voltage passed.
  2021-09-18 08:42:52 uart.c:72:set_baud: set fpga_baud to 115200
  2021-09-18 08:43:02 driver-btm-api.c:1134:check_asic_number_with_power_on: Chain[1]: find 0 asic, times 0
  2021-09-18 08:43:13 driver-btm-api.c:1134:check_asic_number_with_power_on: Chain[1]: find 0 asic, times 1
  2021-09-18 08:43:24 driver-btm-api.c:1134:check_asic_number_with_power_on: Chain[1]: find 0 asic, times 2
  2021-09-18 08:43:24 power_api.c:380:modify_check_asic_voltage: check_asic_voltage_raw = 2100
  chain 1, IO_DRIVE_STRENGTH_CONFIGURATION reg = 0x f1fffff
  2021-09-18 08:43:32 driver-btm-api.c:1157:check_asic_number_with_power_on: Chain[1]: find 0 asic, times 3
  2021-09-18 08:43:32 power_api.c:380:modify_check_asic_voltage: check_asic_voltage_raw = 2050
  2021-09-18 08:43:32 power_api.c:364:set_to_check_asic_voltage_by_steps: Set to voltage raw 2050, step by step.
  2021-09-18 08:43:36 power_api.c:85:check_voltage_multi: retry time: 0
  2021-09-18 08:43:38 power_api.c:40:_get_avg_voltage: chain = 1, voltage = 20.450381
  2021-09-18 08:43:39 power_api.c:40:_get_avg_voltage: chain = 2, voltage = 20.472681
  2021-09-18 08:43:39 power_api.c:53:_get_avg_voltage: average_voltage = 20.461531
  2021-09-18 08:43:39 power_api.c:71:check_voltage: target_vol = 20.50, actural_vol = 20.46, check voltage passed.
  chain 1, IO_DRIVE_STRENGTH_CONFIGURATION reg = 0x f1fffff
  2021-09-18 08:43:48 driver-btm-api.c:1157:check_asic_number_with_power_on: Chain[1]: find 0 asic, times 4
  2021-09-18 08:43:48 power_api.c:380:modify_check_asic_voltage: check_asic_voltage_raw = 2000
  2021-09-18 08:43:48 power_api.c:364:set_to_check_asic_voltage_by_steps: Set to voltage raw 2000, step by step.
  2021-09-18 08:43:51 power_api.c:85:check_voltage_multi: retry time: 0
  2021-09-18 08:43:53 power_api.c:40:_get_avg_voltage: chain = 1, voltage = 19.966920
  2021-09-18 08:43:54 power_api.c:40:_get_avg_voltage: chain = 2, voltage = 19.989835
  2021-09-18 08:43:54 power_api.c:53:_get_avg_voltage: average_voltage = 19.978378
  2021-09-18 08:43:54 power_api.c:71:check_voltage: target_vol = 20.00, actural_vol = 19.98, check voltage passed.
  chain 1, IO_DRIVE_STRENGTH_CONFIGURATION reg = 0x f1fffff
  2021-09-18 08:44:02 driver-btm-api.c:1157:check_asic_number_with_power_on: Chain[1]: find 0 asic, times 5
  2021-09-18 08:44:02 power_api.c:380:modify_check_asic_voltage: check_asic_voltage_raw = 2100
  2021-09-18 08:44:02 power_api.c:364:set_to_check_asic_voltage_by_steps: Set to voltage raw 2100, step by step.
  2021-09-18 08:44:08 power_api.c:85:check_voltage_multi: retry time: 0
  2021-09-18 08:44:10 power_api.c:40:_get_avg_voltage: chain = 1, voltage = 20.958015
  2021-09-18 08:44:11 power_api.c:40:_get_avg_voltage: chain = 2, voltage = 20.955528
  2021-09-18 08:44:11 power_api.c:53:_get_avg_voltage: average_voltage = 20.956771
  2021-09-18 08:44:11 power_api.c:71:check_voltage: target_vol = 21.00, actural_vol = 20.96, check voltage passed.
  2021-09-18 08:44:11 driver-btm-api.c:1193:check_asic_number: Chain 1 only find 0 asic, will power off hash board 1
  2021-09-18 08:44:12 driver-btm-api.c:1195:check_asic_number: Chain 1 voltage: an0 = 2.796774, an2 2.796774, an6 2.535484.
  2021-09-18 08:44:24 driver-btm-api.c:1134:check_asic_number_with_power_on: Chain[2]: find 65 asic, times 0
  2021-09-18 08:44:27 driver-hash-chip.c:266:set_uart_relay: set uart relay to 0x330003
  2021-09-18 08:44:27 driver-btm-api.c:435:set_order_clock: chain[2]: set order clock, stragegy 3
  2021-09-18 08:44:27 driver-hash-chip.c:502:set_clock_delay_control: core_data = 0x34
  2021-09-18 08:44:27 driver-btm-api.c:1892:check_clock_counter: freq 50 clock_counter_limit 6
  2021-09-18 08:44:27 voltage[2] = 1940
  2021-09-18 08:44:27 power_api.c:226:set_working_voltage_raw: working_voltage_raw = 1940
  2021-09-18 08:44:28 temperature.c:340:calibrate_temp_sensor_one_chain: chain 2 temp sensor NCT218
  2021-09-18 08:44:28 uart.c:72:set_baud: set fpga_baud to 12000000
  2021-09-18 08:44:29 driver-btm-api.c:293:check_bringup_temp: Bring up temperature is 27
  2021-09-18 08:44:29 thread.c:1378:create_check_miner_status_thread: create thread
  2021-09-18 08:44:29 thread.c:1368:create_show_miner_status_thread: create thread
  2021-09-18 08:44:29 thread.c:1348:create_temperature_monitor_thread: create thread
  2021-09-18 08:44:29 frequency.c:514:check_bringup_temp_dec_freq: dec freq = 0 when bringup temp = 27 dec_freq_index=0
  2021-09-18 08:44:29 freq_tuning.c:183:freq_tuning_get_max_freq: Max freq of tuning is 650
  2021-09-18 08:44:29 driver-btm-api.c:1765:send_null_work: [DEBUG] Send null work.
  2021-09-18 08:44:29 thread.c:1338:create_asic_status_monitor_thread: create thread
  2021-09-18 08:44:29 frequency.c:1110:inc_freq_with_fixed_vco: chain = 255, freq = 590, is_higher_voltage = true
  2021-09-18 08:44:29 power_api.c:352:set_to_voltage_by_steps: Set to voltage raw 2090, step by step.
  2021-09-18 08:44:31 power_api.c:85:check_voltage_multi: retry time: 0
  2021-09-18 08:44:32 power_api.c:40:_get_avg_voltage: chain = 2, voltage = 20.832486
  2021-09-18 08:44:32 power_api.c:53:_get_avg_voltage: average_voltage = 20.832486
  2021-09-18 08:44:32 power_api.c:71:check_voltage: target_vol = 20.90, actural_vol = 20.83, check voltage passed.
  2021-09-18 08:48:05 power_api.c:352:set_to_voltage_by_steps: Set to voltage raw 2080, step by step.
  2021-09-18 08:48:07 power_api.c:85:check_voltage_multi: retry time: 0
  2021-09-18 08:48:08 power_api.c:40:_get_avg_voltage: chain = 2, voltage = 20.687816
  2021-09-18 08:48:08 power_api.c:53:_get_avg_voltage: average_voltage = 20.687816
  2021-09-18 08:48:08 power_api.c:71:check_voltage: target_vol = 20.80, actural_vol = 20.69, check voltage passed.
  2021-09-18 08:48:58 power_api.c:352:set_to_voltage_by_steps: Set to voltage raw 2030, step by step.
  2021-09-18 08:49:00 power_api.c:85:check_voltage_multi: retry time: 0
  2021-09-18 08:49:01 power_api.c:40:_get_avg_voltage: chain = 2, voltage = 20.205583
  2021-09-18 08:49:01 power_api.c:53:_get_avg_voltage: average_voltage = 20.205583
  2021-09-18 08:49:01 power_api.c:71:check_voltage: target_vol = 20.30, actural_vol = 20.21, check voltage passed.
  2021-09-18 08:51:25 power_api.c:352:set_to_voltage_by_steps: Set to voltage raw 2020, step by step.
  2021-09-18 08:51:27 power_api.c:85:check_voltage_multi: retry time: 0
  2021-09-18 08:51:28 power_api.c:40:_get_avg_voltage: chain = 2, voltage = 20.085024
  2021-09-18 08:51:28 power_api.c:53:_get_avg_voltage: average_voltage = 20.085024
  2021-09-18 08:51:28 power_api.c:71:check_voltage: target_vol = 20.20, actural_vol = 20.09, check voltage passed.
  2021-09-18 08:51:28 frequency.c:1181:inc_asic_diff_freq_by_steps: chain = 2, start = 590, freq_step = 5
  2021-09-18 08:51:32 driver-btm-api.c:765:set_timeout: freq = 620, percent = 90, hcn = 44236, timeout = 71
  2021-09-18 08:51:32 power_api.c:310:set_to_working_voltage_by_steps: Set to voltage raw 1940, step by step.
  2021-09-18 08:51:35 power_api.c:85:check_voltage_multi: retry time: 0
  2021-09-18 08:51:36 power_api.c:40:_get_avg_voltage: chain = 2, voltage = 19.313451
  2021-09-18 08:51:36 power_api.c:53:_get_avg_voltage: average_voltage = 19.313451
  2021-09-18 08:51:36 power_api.c:71:check_voltage: target_vol = 19.40, actural_vol = 19.31, check voltage passed.
  2021-09-18 08:51:36 thread.c:1373:create_check_system_status_thread: create thread
  2021-09-18 08:51:37 driver-btm-api.c:2618:bitmain_soc_init: Init done!
  2021-09-18 08:51:37 driver-btm-api.c:222:set_miner_status: STATUS_INIT
  2021-09-18 08:51:41 driver-btm-api.c:222:set_miner_status: STATUS_OKAY
  2021-09-18 08:51:42 frequency.c:205:get_ideal_hash_rate_GH: ideal_hash_rate = 25808
  2021-09-18 08:51:42 frequency.c:223:get_sale_hash_rate_GH: sale_hash_rate = 25000
  2021-09-18 08:51:45 driver-btm-api.c:1496:dhash_chip_send_job: Version num 4.
  2021-09-18 08:51:45 driver-btm-api.c:1644:dhash_chip_send_job: stime.tv_sec 1631955105, block_ntime 1631955088
  2021-09-18 08:52:52 register.c:313:get_register: !!! REG_TYPE = 1. 603980802
  2021-09-18 08:52:52 register.c:313:get_register: !!! REG_TYPE = 1. 738395138
  2021-09-18 08:52:52 register.c:313:get_register: !!! REG_TYPE = 1. 872809474
  2021-09-18 08:52:52 register.c:313:get_register: !!! REG_TYPE = 1. 956892162
  2021-09-18 08:52:52 register.c:313:get_register: !!! REG_TYPE = 1. 554435586
  2021-09-18 08:52:52 register.c:313:get_register: !!! REG_TYPE = 1. 688849922
  2021-09-18 08:52:52 register.c:313:get_register: !!! REG_TYPE = 1. 991036418
  2021-09-18 08:52:52 register.c:313:get_register: !!! REG_TYPE = 1. 806683650
  2021-09-18 08:52:52 register.c:313:get_register: !!! REG_TYPE = 1. 773325826
  2021-09-18 08:52:52 register.c:313:get_register: !!! REG_TYPE = 1. 639304706
  2021-09-18 08:52:52 register.c:313:get_register: !!! REG_TYPE = 1. 1042154498
  2021-09-18 08:52:52 register.c:313:get_register: !!! REG_TYPE = 1. 656475138
  2021-09-18 08:52:52 register.c:313:get_register: !!! REG_TYPE = 1. 1059324930
  2021-09-18 08:52:52 register.c:313:get_register: !!! REG_TYPE = 1. 925303810
  2021-09-18 08:52:52 register.c:313:get_register: !!! REG_TYPE = 1. 690619394
  2021-09-18 08:52:52 register.c:313:get_register: !!! REG_TYPE = 1. 573375490
  2021-09-18 08:52:52 register.c:313:get_register: !!! REG_TYPE = 1. 808453122
  2021-09-18 08:52:52 register.c:313:get_register: !!! REG_TYPE = 1. 942867458
  2021-09-18 08:52:52 register.c:313:get_register: !!! REG_TYPE = 1. 540410882
  2021-09-18 08:52:52 register.c:313:get_register: !!! REG_TYPE = 1. 758711298
  2021-09-18 08:52:52 register.c:313:get_register: !!! REG_TYPE = 1. 893125634
  2021-09-18 08:52:52 register.c:313:get_register: !!! REG_TYPE = 1. 1027539970
  2021-09-18 08:52:52 register.c:313:get_register: !!! REG_TYPE = 1. 574751746
  2021-09-18 08:52:52 register.c:313:get_register: !!! REG_TYPE = 1. 692388866
  2021-09-18 08:52:52 register.c:313:get_register: !!! REG_TYPE = 1. 927466498
  2021-09-18 08:52:52 register.c:313:get_register: !!! REG_TYPE = 1. 1061880834
  2021-09-18 08:52:52 register.c:313:get_register: !!! REG_TYPE = 1. 659424258
  2021-09-18 08:52:52 register.c:313:get_register: !!! REG_TYPE = 1. 642843650
  2021-09-18 08:52:52 register.c:313:get_register: !!! REG_TYPE = 1. 1045693442
  2021-09-18 08:52:52 register.c:313:get_register: !!! REG_TYPE = 1. 911672322
  2021-09-18 08:52:52 register.c:313:get_register: !!! REG_TYPE = 1. 676987906
  2021-09-18 08:52:52 register.c:313:get_register: !!! REG_TYPE = 1. 593298434
  2021-09-18 08:52:52 register.c:313:get_register: !!! REG_TYPE = 1. 694158338
  2021-09-18 08:52:52 register.c:313:get_register: !!! REG_TYPE = 1. 560137218
  2021-09-18 08:52:52 register.c:313:get_register: !!! REG_TYPE = 1. 962987010
  2021-09-18 08:52:52 register.c:313:get_register: !!! REG_TYPE = 1. 879297538
  2021-09-18 08:52:52 register.c:313:get_register: !!! REG_TYPE = 1. 745276418
  2021-09-18 08:52:52 register.c:313:get_register: !!! REG_TYPE = 1. 611255298
  2021-09-18 08:52:52 register.c:313:get_register: !!! REG_TYPE = 1. 913441794
  2021-09-18 08:52:52 register.c:313:get_register: !!! REG_TYPE = 1. 1031078914
  2021-09-18 08:52:52 register.c:313:get_register: !!! REG_TYPE = 1. 595067906
  2021-09-18 08:52:52 register.c:313:get_register: !!! REG_TYPE = 1. 729482242
  2021-09-18 08:52:52 register.c:313:get_register: !!! REG_TYPE = 1. 863896578
  2021-09-18 08:52:52 register.c:313:get_register: !!! REG_TYPE = 1. 813761538
  2021-09-18 08:52:52 register.c:313:get_register: !!! REG_TYPE = 1. 679740418
  2021-09-18 08:52:52 register.c:313:get_register: !!! REG_TYPE = 1. 545719298
  2021-09-18 08:52:52 register.c:313:get_register: !!! REG_TYPE = 1. 1049232386
  2021-09-18 08:52:52 register.c:313:get_register: !!! REG_TYPE = 1. 898434050
  2021-09-18 08:52:52 register.c:313:get_register: !!! REG_TYPE = 1. 663749634
  2021-09-18 08:52:52 register.c:313:get_register: !!! REG_TYPE = 1. 798163970
  2021-09-18 08:52:52 register.c:313:get_register: !!! REG_TYPE = 1. 932578306
  2021-09-18 08:52:52 register.c:313:get_register: !!! REG_TYPE = 1. 983106562
  2021-09-18 08:52:52 register.c:313:get_register: !!! REG_TYPE = 1. 580649986
  2021-09-18 08:52:52 register.c:313:get_register: !!! REG_TYPE = 1. 715064322
  2021-09-18 08:52:52 register.c:313:get_register: !!! REG_TYPE = 1. 547488770
  2021-09-18 08:52:52 register.c:313:get_register: !!! REG_TYPE = 1. 732234754
  2021-09-18 08:52:52 register.c:313:get_register: !!! REG_TYPE = 1. 900203522
  2021-09-18 08:52:52 register.c:313:get_register: !!! REG_TYPE = 1. 1034617858
  2021-09-18 08:52:52 register.c:313:get_register: !!! REG_TYPE = 1. 632161282
  2021-09-18 08:52:52 register.c:313:get_register: !!! REG_TYPE = 1. 615580674
  2021-09-18 08:52:52 register.c:313:get_register: !!! REG_TYPE = 1. 1018430466
  2021-09-18 08:52:52 register.c:313:get_register: !!! REG_TYPE = 1. 884409346
  2021-09-18 08:52:52 register.c:313:get_register: !!! REG_TYPE = 1. 716833794
  2021-09-18 08:52:52 register.c:313:get_register: !!! REG_TYPE = 1. 566035458
  2021-09-18 08:52:52 register.c:313:get_register: !!! REG_TYPE = 1. 1052771330
  2021-09-18 08:52:53 register.c:313:get_register: !!! REG_TYPE = 1. 603980802
  2021-09-18 08:52:53 register.c:313:get_register: !!! REG_TYPE = 1. 738395138
  2021-09-18 08:52:53 register.c:313:get_register: !!! REG_TYPE = 1. 872809474
  2021-09-18 08:52:53 register.c:313:get_register: !!! REG_TYPE = 1. 956892162
  2021-09-18 08:52:53 register.c:313:get_register: !!! REG_TYPE = 1. 554435586
  2021-09-18 08:52:53 register.c:313:get_register: !!! REG_TYPE = 1. 688849922
  2021-09-18 08:52:53 register.c:313:get_register: !!! REG_TYPE = 1. 991036418
  2021-09-18 08:52:53 register.c:313:get_register: !!! REG_TYPE = 1. 806683650
  2021-09-18 08:52:53 register.c:313:get_register: !!! REG_TYPE = 1. 773325826
  2021-09-18 08:52:53 register.c:313:get_register: !!! REG_TYPE = 1. 639304706
  2021-09-18 08:52:53 register.c:313:get_register: !!! REG_TYPE = 1. 1042154498
  2021-09-18 08:52:53 register.c:313:get_register: !!! REG_TYPE = 1. 656475138
  2021-09-18 08:52:53 register.c:313:get_register: !!! REG_TYPE = 1. 1059324930
  2021-09-18 08:52:53 register.c:313:get_register: !!! REG_TYPE = 1. 925303810
  2021-09-18 08:52:53 register.c:313:get_register: !!! REG_TYPE = 1. 690619394
  2021-09-18 08:52:53 register.c:313:get_register: !!! REG_TYPE = 1. 573375490
  2021-09-18 08:52:53 register.c:313:get_register: !!! REG_TYPE = 1. 808453122
  2021-09-18 08:52:53 register.c:313:get_register: !!! REG_TYPE = 1. 942867458
  2021-09-18 08:52:53 register.c:313:get_register: !!! REG_TYPE = 1. 540410882
  2021-09-18 08:52:53 register.c:313:get_register: !!! REG_TYPE = 1. 758711298
  2021-09-18 08:52:53 register.c:313:get_register: !!! REG_TYPE = 1. 893125634
  2021-09-18 08:52:53 register.c:313:get_register: !!! REG_TYPE = 1. 1027539970
  2021-09-18 08:52:53 register.c:313:get_register: !!! REG_TYPE = 1. 574751746
  2021-09-18 08:52:53 register.c:313:get_register: !!! REG_TYPE = 1. 692388866
  2021-09-18 08:52:53 register.c:313:get_register: !!! REG_TYPE = 1. 927466498
  2021-09-18 08:52:53 register.c:313:get_register: !!! REG_TYPE = 1. 659424258
  2021-09-18 08:52:53 register.c:313:get_register: !!! REG_TYPE = 1. 642843650
  2021-09-18 08:52:53 register.c:313:get_register: !!! REG_TYPE = 1. 1045693442
  2021-09-18 08:52:53 register.c:313:get_register: !!! REG_TYPE = 1. 911672322
  2021-09-18 08:52:53 register.c:313:get_register: !!! REG_TYPE = 1. 676987906
  2021-09-18 08:52:53 register.c:313:get_register: !!! REG_TYPE = 1. 593298434
  2021-09-18 08:52:53 register.c:313:get_register: !!! REG_TYPE = 1. 694158338
  2021-09-18 08:52:53 register.c:313:get_register: !!! REG_TYPE = 1. 560137218
  2021-09-18 08:52:53 register.c:313:get_register: !!! REG_TYPE = 1. 962987010
  2021-09-18 08:52:53 register.c:313:get_register: !!! REG_TYPE = 1. 879297538
  2021-09-18 08:52:53 register.c:313:get_register: !!! REG_TYPE = 1. 745276418
  2021-09-18 08:52:53 register.c:313:get_register: !!! REG_TYPE = 1. 611255298
  2021-09-18 08:52:53 register.c:313:get_register: !!! REG_TYPE = 1. 913441794
  2021-09-18 08:52:53 register.c:313:get_register: !!! REG_TYPE = 1. 1031078914
  2021-09-18 08:52:53 register.c:313:get_register: !!! REG_TYPE = 1. 595067906
  2021-09-18 08:52:53 register.c:313:get_register: !!! REG_TYPE = 1. 729482242
  2021-09-18 08:52:53 register.c:313:get_register: !!! REG_TYPE = 1. 863896578
  2021-09-18 08:52:53 register.c:313:get_register: !!! REG_TYPE = 1. 813761538
  2021-09-18 08:52:53 register.c:313:get_register: !!! REG_TYPE = 1. 679740418
  2021-09-18 08:52:53 register.c:313:get_register: !!! REG_TYPE = 1. 545719298
  2021-09-18 08:52:53 register.c:313:get_register: !!! REG_TYPE = 1. 1049232386
  2021-09-18 08:52:53 register.c:313:get_register: !!! REG_TYPE = 1. 898434050
  2021-09-18 08:52:53 register.c:313:get_register: !!! REG_TYPE = 1. 663749634
  2021-09-18 08:52:53 register.c:313:get_register: !!! REG_TYPE = 1. 798163970
  2021-09-18 08:52:53 register.c:313:get_register: !!! REG_TYPE = 1. 932578306
  2021-09-18 08:52:53 register.c:313:get_register: !!! REG_TYPE = 1. 983106562
  2021-09-18 08:52:53 register.c:313:get_register: !!! REG_TYPE = 1. 580649986
  2021-09-18 08:52:53 register.c:313:get_register: !!! REG_TYPE = 1. 715064322
  2021-09-18 08:52:53 register.c:313:get_register: !!! REG_TYPE = 1. 547488770
  2021-09-18 08:52:53 register.c:313:get_register: !!! REG_TYPE = 1. 732234754
  2021-09-18 08:52:53 register.c:313:get_register: !!! REG_TYPE = 1. 900203522
  2021-09-18 08:52:53 register.c:313:get_register: !!! REG_TYPE = 1. 1034617858
  2021-09-18 08:52:53 register.c:313:get_register: !!! REG_TYPE = 1. 632161282
  2021-09-18 08:52:53 register.c:313:get_register: !!! REG_TYPE = 1. 615580674
  2021-09-18 08:52:53 register.c:313:get_register: !!! REG_TYPE = 1. 1018430466
  2021-09-18 08:52:53 register.c:313:get_register: !!! REG_TYPE = 1. 884409346
  2021-09-18 08:52:53 register.c:313:get_register: !!! REG_TYPE = 1. 716833794
  2021-09-18 08:52:53 register.c:313:get_register: !!! REG_TYPE = 1. 566035458
  2021-09-18 08:52:53 register.c:313:get_register: !!! REG_TYPE = 1. 1052771330
  2021-09-18 08:52:53 register.c:313:get_register: !!! REG_TYPE = 1. 554435586
  2021-09-18 08:52:53 register.c:313:get_register: !!! REG_TYPE = 1. 925303810
  2021-09-18 08:52:53 register.c:313:get_register: !!! REG_TYPE = 1. 554435586
  2021-09-18 08:52:53 register.c:313:get_register: !!! REG_TYPE = 1. 690619394
  2021-09-18 08:52:53 register.c:313:get_register: !!! REG_TYPE = 1. 808453122
  2021-09-18 08:52:53 register.c:313:get_register: !!! REG_TYPE = 1. 540410882
  2021-09-18 08:52:53 register.c:313:get_register: !!! REG_TYPE = 1. 758711298
  2021-09-18 08:52:53 register.c:313:get_register: !!! REG_TYPE = 1. 1027539970
  2021-09-18 08:52:53 register.c:313:get_register: !!! REG_TYPE = 1. 574751746
  2021-09-18 08:52:53 register.c:313:get_register: !!! REG_TYPE = 1. 692388866
  2021-09-18 08:52:53 register.c:313:get_register: !!! REG_TYPE = 1. 927466498
  2021-09-18 08:52:53 register.c:313:get_register: !!! REG_TYPE = 1. 659424258
  2021-09-18 08:52:53 register.c:313:get_register: !!! REG_TYPE = 1. 642843650
  2021-09-18 08:52:53 register.c:313:get_register: !!! REG_TYPE = 1. 1045693442
  2021-09-18 08:52:53 register.c:313:get_register: !!! REG_TYPE = 1. 911672322
  2021-09-18 08:52:53 register.c:313:get_register: !!! REG_TYPE = 1. 676987906
  2021-09-18 08:52:53 register.c:313:get_register: !!! REG_TYPE = 1. 593298434
  2021-09-18 08:52:53 register.c:313:get_register: !!! REG_TYPE = 1. 694158338
  2021-09-18 08:52:53 register.c:313:get_register: !!! REG_TYPE = 1. 560137218
  2021-09-18 08:52:53 register.c:313:get_register: !!! REG_TYPE = 1. 962987010
  2021-09-18 08:52:53 register.c:313:get_register: !!! REG_TYPE = 1. 879297538
  2021-09-18 08:52:53 register.c:313:get_register: !!! REG_TYPE = 1. 603980802
  2021-09-18 08:52:53 register.c:313:get_register: !!! REG_TYPE = 1. 738395138
  2021-09-18 08:52:53 register.c:313:get_register: !!! REG_TYPE = 1. 872809474
  2021-09-18 08:52:53 register.c:313:get_register: !!! REG_TYPE = 1. 956892162
  2021-09-18 08:52:53 register.c:313:get_register: !!! REG_TYPE = 1. 745276418
  2021-09-18 08:52:53 register.c:313:get_register: !!! REG_TYPE = 1. 611255298
  2021-09-18 08:52:53 register.c:313:get_register: !!! REG_TYPE = 1. 913441794
  2021-09-18 08:52:53 register.c:313:get_register: !!! REG_TYPE = 1. 1031078914
  2021-09-18 08:52:53 register.c:313:get_register: !!! REG_TYPE = 1. 595067906
  2021-09-18 08:52:53 register.c:313:get_register: !!! REG_TYPE = 1. 729482242
  2021-09-18 08:52:53 register.c:313:get_register: !!! REG_TYPE = 1. 863896578
  2021-09-18 08:52:53 register.c:313:get_register: !!! REG_TYPE = 1. 813761538
  2021-09-18 08:52:53 register.c:313:get_register: !!! REG_TYPE = 1. 679740418
  2021-09-18 08:52:53 register.c:313:get_register: !!! REG_TYPE = 1. 545719298
  2021-09-18 08:52:53 register.c:313:get_register: !!! REG_TYPE = 1. 1049232386
  2021-09-18 08:52:53 register.c:313:get_register: !!! REG_TYPE = 1. 898434050
  2021-09-18 08:52:53 register.c:313:get_register: !!! REG_TYPE = 1. 663749634
  2021-09-18 08:52:53 register.c:313:get_register: !!! REG_TYPE = 1. 798163970
  2021-09-18 08:52:53 register.c:313:get_register: !!! REG_TYPE = 1. 932578306
  2021-09-18 08:52:53 register.c:313:get_register: !!! REG_TYPE = 1. 983106562
  2021-09-18 08:52:53 register.c:313:get_register: !!! REG_TYPE = 1. 580649986
  2021-09-18 08:52:53 register.c:313:get_register: !!! REG_TYPE = 1. 715064322
  2021-09-18 08:52:53 register.c:313:get_register: !!! REG_TYPE = 1. 547488770
  2021-09-18 08:52:53 register.c:313:get_register: !!! REG_TYPE = 1. 732234754
  2021-09-18 08:52:53 register.c:313:get_register: !!! REG_TYPE = 1. 900203522
  2021-09-18 08:52:53 register.c:313:get_register: !!! REG_TYPE = 1. 1034617858
  2021-09-18 08:52:53 register.c:313:get_register: !!! REG_TYPE = 1. 632161282
  2021-09-18 08:52:53 register.c:313:get_register: !!! REG_TYPE = 1. 615580674
  2021-09-18 08:52:53 register.c:313:get_register: !!! REG_TYPE = 1. 1018430466
  2021-09-18 08:52:53 register.c:313:get_register: !!! REG_TYPE = 1. 884409346
  2021-09-18 08:52:53 register.c:313:get_register: !!! REG_TYPE = 1. 716833794
  2021-09-18 08:52:53 register.c:313:get_register: !!! REG_TYPE = 1. 566035458
  2021-09-18 08:52:53 register.c:313:get_register: !!! REG_TYPE = 1. 1052771330
  2021-09-18 08:52:53 register.c:313:get_register: !!! REG_TYPE = 1. 738395138
  2021-09-18 08:52:53 register.c:313:get_register: !!! REG_TYPE = 1. 806683650
  2021-09-18 08:52:53 register.c:313:get_register: !!! REG_TYPE = 1. 773325826
  2021-09-18 08:52:53 register.c:313:get_register: !!! REG_TYPE = 1. 554435586
  2021-09-18 08:52:53 register.c:313:get_register: !!! REG_TYPE = 1. 872809474
  2021-09-18 08:52:53 register.c:313:get_register: !!! REG_TYPE = 1. 956892162
  2021-09-18 08:52:53 register.c:313:get_register: !!! REG_TYPE = 1. 603980802
  2021-09-18 08:52:53 register.c:313:get_register: !!! REG_TYPE = 1. 738395138
  2021-09-18 08:52:53 register.c:313:get_register: !!! REG_TYPE = 1. 808453122
  2021-09-18 08:52:53 register.c:313:get_register: !!! REG_TYPE = 1. 603980802
  2021-09-18 08:52:53 register.c:313:get_register: !!! REG_TYPE = 1. 738395138
  2021-09-18 08:52:53 register.c:313:get_register: !!! REG_TYPE = 1. 872809474
  2021-09-18 08:52:53 register.c:313:get_register: !!! REG_TYPE = 1. 956892162
  2021-09-18 08:52:53 register.c:313:get_register: !!! REG_TYPE = 1. 554435586
  2021-09-18 08:52:53 register.c:313:get_register: !!! REG_TYPE = 1. 991036418
  2021-09-18 08:52:53 register.c:313:get_register: !!! REG_TYPE = 1. 806683650
  2021-09-18 08:52:53 register.c:313:get_register: !!! REG_TYPE = 1. 773325826
  2021-09-18 08:52:53 register.c:313:get_register: !!! REG_TYPE = 1. 639304706
  2021-09-18 08:52:53 register.c:313:get_register: !!! REG_TYPE = 1. 1042154498
  2021-09-18 08:52:53 register.c:313:get_register: !!! REG_TYPE = 1. 656475138
  2021-09-18 08:52:53 register.c:313:get_register: !!! REG_TYPE = 1. 1059324930
  2021-09-18 08:52:53 register.c:313:get_register: !!! REG_TYPE = 1. 925303810
  2021-09-18 08:52:53 register.c:313:get_register: !!! REG_TYPE = 1. 690619394
  2021-09-18 08:52:53 register.c:313:get_register: !!! REG_TYPE = 1. 573375490
  2021-09-18 08:52:53 register.c:313:get_register: !!! REG_TYPE = 1. 942867458
  2021-09-18 08:52:53 register.c:313:get_register: !!! REG_TYPE = 1. 540410882
  2021-09-18 08:52:53 register.c:313:get_register: !!! REG_TYPE = 1. 758711298
  2021-09-18 08:52:53 thread.c:1273:asic_status_monitor_thread: ERROR: chain 2 get hashrate_reg_counter 52, require 65, failed times 1: ooooo xoooo ooooo ooooo ooooo xoooo ooooo ooooo ooooo ooooo oooox xxxxx xxxxx
  2021-09-18 08:52:53 register.c:313:get_register: !!! REG_TYPE = 1. 603980802
  2021-09-18 08:52:53 register.c:313:get_register: !!! REG_TYPE = 1. 738395138
  2021-09-18 08:52:53 register.c:313:get_register: !!! REG_TYPE = 1. 872809474
  2021-09-18 08:52:53 register.c:313:get_register: !!! REG_TYPE = 1. 956892162
  2021-09-18 08:52:53 register.c:313:get_register: !!! REG_TYPE = 1. 554435586
  2021-09-18 08:52:53 register.c:313:get_register: !!! REG_TYPE = 1. 991036418
  2021-09-18 08:52:53 register.c:313:get_register: !!! REG_TYPE = 1. 806683650
  2021-09-18 08:52:53 register.c:313:get_register: !!! REG_TYPE = 1. 773325826
  2021-09-18 08:52:53 register.c:313:get_register: !!! REG_TYPE = 1. 639304706
  2021-09-18 08:52:53 register.c:313:get_register: !!! REG_TYPE = 1. 924720130
  2021-09-18 08:52:53 register.c:313:get_register: !!! REG_TYPE = 1. 656475138
  2021-09-18 08:52:53 register.c:313:get_register: !!! REG_TYPE = 1. 1059324930
  2021-09-18 08:52:53 register.c:313:get_register: !!! REG_TYPE = 1. 925303810
  2021-09-18 08:52:53 register.c:313:get_register: !!! REG_TYPE = 1. 539630594
  2021-09-18 08:52:53 register.c:313:get_register: !!! REG_TYPE = 1. 573375490
  2021-09-18 08:52:53 register.c:313:get_register: !!! REG_TYPE = 1. 808453122
  2021-09-18 08:52:53 register.c:313:get_register: !!! REG_TYPE = 1. 942867458
  2021-09-18 08:52:53 register.c:313:get_register: !!! REG_TYPE = 1. 540410882
  2021-09-18 08:52:53 register.c:313:get_register: !!! REG_TYPE = 1. 758711298
  2021-09-18 08:52:53 register.c:313:get_register: !!! REG_TYPE = 1. 893125634
  2021-09-18 08:52:53 register.c:313:get_register: !!! REG_TYPE = 1. 1027539970
  2021-09-18 08:52:53 register.c:313:get_register: !!! REG_TYPE = 1. 574751746
  2021-09-18 08:52:53 register.c:313:get_register: !!! REG_TYPE = 1. 692388866
  2021-09-18 08:52:53 register.c:313:get_register: !!! REG_TYPE = 1. 927466498
  2021-09-18 08:52:53 register.c:313:get_register: !!! REG_TYPE = 1. 659424258
  2021-09-18 08:52:53 register.c:313:get_register: !!! REG_TYPE = 1. 642843650
  2021-09-18 08:52:53 register.c:313:get_register: !!! REG_TYPE = 1. 1045693442
  2021-09-18 08:52:53 register.c:313:get_register: !!! REG_TYPE = 1. 911672322
  2021-09-18 08:52:53 register.c:313:get_register: !!! REG_TYPE = 1. 676987906
  2021-09-18 08:52:53 register.c:313:get_register: !!! REG_TYPE = 1. 593298434
  2021-09-18 08:52:53 register.c:313:get_register: !!! REG_TYPE = 1. 694158338
  2021-09-18 08:52:53 register.c:313:get_register: !!! REG_TYPE = 1. 560137218
  2021-09-18 08:52:53 register.c:313:get_register: !!! REG_TYPE = 1. 962987010
  2021-09-18 08:52:53 register.c:313:get_register: !!! REG_TYPE = 1. 879297538
  2021-09-18 08:52:53 register.c:313:get_register: !!! REG_TYPE = 1. 745276418
  2021-09-18 08:52:53 register.c:313:get_register: !!! REG_TYPE = 1. 611255298
  2021-09-18 08:52:53 register.c:313:get_register: !!! REG_TYPE = 1. 913441794
  2021-09-18 08:52:53 register.c:313:get_register: !!! REG_TYPE = 1. 1031078914
  2021-09-18 08:52:53 register.c:313:get_register: !!! REG_TYPE = 1. 595067906
  2021-09-18 08:52:53 register.c:313:get_register: !!! REG_TYPE = 1. 729482242
  2021-09-18 08:52:53 register.c:313:get_register: !!! REG_TYPE = 1. 863896578
  2021-09-18 08:52:53 register.c:313:get_register: !!! REG_TYPE = 1. 813761538
  2021-09-18 08:52:53 register.c:313:get_register: !!! REG_TYPE = 1. 679740418
  2021-09-18 08:52:53 register.c:313:get_register: !!! REG_TYPE = 1. 545719298
  2021-09-18 08:52:53 register.c:313:get_register: !!! REG_TYPE = 1. 1049232386
  2021-09-18 08:52:53 register.c:313:get_register: !!! REG_TYPE = 1. 898434050
  2021-09-18 08:52:53 register.c:313:get_register: !!! REG_TYPE = 1. 663749634
  2021-09-18 08:52:53 register.c:313:get_register: !!! REG_TYPE = 1. 798163970
  2021-09-18 08:52:53 register.c:313:get_register: !!! REG_TYPE = 1. 932578306
  2021-09-18 08:52:53 register.c:313:get_register: !!! REG_TYPE = 1. 983106562
  2021-09-18 08:52:53 register.c:313:get_register: !!! REG_TYPE = 1. 580649986
  2021-09-18 08:52:53 register.c:313:get_register: !!! REG_TYPE = 1. 715064322
  2021-09-18 08:52:54 temperature.c:843:get_temp_info: read temp sensor failed: chain = 2, sensor = 2, chip = 54, reg = 0
  2021-09-18 08:52:54 temperature.c:843:get_temp_info: read temp sensor failed: chain = 2, sensor = 2, chip = 54, reg = 1
  2021-09-18 08:52:54 register.c:313:get_register: !!! REG_TYPE = 1. 603980802
  2021-09-18 08:52:55 thread.c:1293:asic_status_monitor_thread: chain 2 can't get enough hashrate reg val for 0 times.
  2021-09-18 08:52:55 thread.c:1273:asic_status_monitor_thread: ERROR: chain 2 get hashrate_reg_counter 16, require 65, failed times 1: ooooo xoooo oxxox xxxxo xxxox xxxxx xxoxx ooxxx xxxxx xxxxx xxxxx xxxxx xxxxx
  2021-09-18 08:52:55 temperature.c:843:get_temp_info: read temp sensor failed: chain = 2, sensor = 0, chip = 14, reg = 0
  2021-09-18 08:52:56 temperature.c:843:get_temp_info: read temp sensor failed: chain = 2, sensor = 0, chip = 14, reg = 1
  2021-09-18 08:52:56 temperature.c:843:get_temp_info: read temp sensor failed: chain = 2, sensor = 2, chip = 54, reg = 0
  2021-09-18 08:52:57 temperature.c:843:get_temp_info: read temp sensor failed: chain = 2, sensor = 2, chip = 54, reg = 1
  2021-09-18 08:52:57 register.c:313:get_register: !!! REG_TYPE = 1. 773325826
  2021-09-18 08:52:57 temperature.c:843:get_temp_info: read temp sensor failed: chain = 2, sensor = 3, chip = 50, reg = 0
  2021-09-18 08:52:57 thread.c:1293:asic_status_monitor_thread: chain 2 can't get enough hashrate reg val for 1 times.
  2021-09-18 08:52:57 register.c:313:get_register: !!! REG_TYPE = 1. 872809474
  2021-09-18 08:52:57 register.c:313:get_register: !!! REG_TYPE = 1. 956892162
  2021-09-18 08:52:57 register.c:313:get_register: !!! REG_TYPE = 1. 554435586
  2021-09-18 08:52:57 register.c:313:get_register: !!! REG_TYPE = 1. 991036418
  2021-09-18 08:52:57 register.c:313:get_register: !!! REG_TYPE = 1. 806683650
  2021-09-18 08:52:57 register.c:313:get_register: !!! REG_TYPE = 1. 773325826
  2021-09-18 08:52:57 register.c:313:get_register: !!! REG_TYPE = 1. 639304706
  2021-09-18 08:52:57 register.c:313:get_register: !!! REG_TYPE = 1. 1042154498
  2021-09-18 08:52:57 register.c:313:get_register: !!! REG_TYPE = 1. 925303810
  2021-09-18 08:52:57 register.c:313:get_register: !!! REG_TYPE = 1. 758711298
  2021-09-18 08:52:57 register.c:313:get_register: !!! REG_TYPE = 1. 692388866
  2021-09-18 08:52:57 register.c:313:get_register: !!! REG_TYPE = 1. 694158338
  2021-09-18 08:52:57 register.c:313:get_register: !!! REG_TYPE = 1. 879297538
  2021-09-18 08:52:57 register.c:313:get_register: !!! REG_TYPE = 1. 745276418
  2021-09-18 08:52:57 temperature.c:843:get_temp_info: read temp sensor failed: chain = 2, sensor = 3, chip = 50, reg = 1
  2021-09-18 08:52:57 thread.c:1273:asic_status_monitor_thread: ERROR: chain 2 get hashrate_reg_counter 14, require 65, failed times 1: xxooo xoooo oxxox xxxxo xxxox xxxxx xxoxx ooxxx xxxxx xxxxx xxxxx xxxxx xxxxx
  2021-09-18 08:52:59 temperature.c:843:get_temp_info: read temp sensor failed: chain = 2, sensor = 0, chip = 14, reg = 0
  2021-09-18 08:52:59 thread.c:1293:asic_status_monitor_thread: chain 2 can't get enough hashrate reg val for 2 times.
  2021-09-18 08:52:59 temperature.c:843:get_temp_info: read temp sensor failed: chain = 2, sensor = 0, chip = 14, reg = 1
  2021-09-18 08:52:59 thread.c:1273:asic_status_monitor_thread: ERROR: chain 2 get hashrate_reg_counter 16, require 65, failed times 1: ooooo xoooo oxxox xxxxo xxxox xxxxx xxoxx ooxxx xxxxx xxxxx xxxxx xxxxx xxxxx
  2021-09-18 08:52:59 register.c:313:get_register: !!! REG_TYPE = 1. 603980802
  2021-09-18 08:52:59 register.c:313:get_register: !!! REG_TYPE = 1. 738395138
  2021-09-18 08:52:59 register.c:313:get_register: !!! REG_TYPE = 1. 872809474
  2021-09-18 08:52:59 register.c:313:get_register: !!! REG_TYPE = 1. 956892162
  2021-09-18 08:52:59 register.c:313:get_register: !!! REG_TYPE = 1. 554435586
  2021-09-18 08:52:59 register.c:313:get_register: !!! REG_TYPE = 1. 991036418
  2021-09-18 08:52:59 register.c:313:get_register: !!! REG_TYPE = 1. 806683650
  2021-09-18 08:52:59 register.c:313:get_register: !!! REG_TYPE = 1. 773325826
  2021-09-18 08:53:00 temperature.c:843:get_temp_info: read temp sensor failed: chain = 2, sensor = 2, chip = 54, reg = 0
  2021-09-18 08:53:00 temperature.c:843:get_temp_info: read temp sensor failed: chain = 2, sensor = 2, chip = 54, reg = 1
  2021-09-18 08:53:00 temperature.c:843:get_temp_info: read temp sensor failed: chain = 2, sensor = 3, chip = 50, reg = 0
  2021-09-18 08:53:01 temperature.c:843:get_temp_info: read temp sensor failed: chain = 2, sensor = 3, chip = 50, reg = 1
  2021-09-18 08:53:01 thread.c:1293:asic_status_monitor_thread: chain 2 can't get enough hashrate reg val for 3 times.
  2021-09-18 08:53:01 thread.c:1273:asic_status_monitor_thread: ERROR: chain 2 get hashrate_reg_counter 8, require 65, failed times 1: ooooo xooox xxxxx xxxxx xxxxx xxxxx xxxxx xxxxx xxxxx xxxxx xxxxx xxxxx xxxxx
  2021-09-18 08:53:02 temperature.c:843:get_temp_info: read temp sensor failed: chain = 2, sensor = 0, chip = 14, reg = 0
  2021-09-18 08:53:02 temperature.c:843:get_temp_info: read temp sensor failed: chain = 2, sensor = 0, chip = 14, reg = 1
  2021-09-18 08:53:03 temperature.c:843:get_temp_info: read temp sensor failed: chain = 2, sensor = 1, chip = 10, reg = 0
  2021-09-18 08:53:03 temperature.c:843:get_temp_info: read temp sensor failed: chain = 2, sensor = 1, chip = 10, reg = 1
  2021-09-18 08:53:03 thread.c:1293:asic_status_monitor_thread: chain 2 can't get enough hashrate reg val for 4 times.
  2021-09-18 08:53:03 temperature.c:843:get_temp_info: read temp sensor failed: chain = 2, sensor = 2, chip = 54, reg = 0
  2021-09-18 08:53:03 thread.c:1273:asic_status_monitor_thread: ERROR: chain 2 get hashrate_reg_counter 8, require 65, failed times 1: ooooo xooox xxxxx xxxxx xxxxx xxxxx xxxxx xxxxx xxxxx xxxxx xxxxx xxxxx xxxxx
  2021-09-18 08:53:04 temperature.c:843:get_temp_info: read temp sensor failed: chain = 2, sensor = 2, chip = 54, reg = 1
  2021-09-18 08:53:04 temperature.c:843:get_temp_info: read temp sensor failed: chain = 2, sensor = 3, chip = 50, reg = 0
  2021-09-18 08:53:04 temperature.c:843:get_temp_info: read temp sensor failed: chain = 2, sensor = 3, chip = 50, reg = 1
  2021-09-18 08:53:04 temperature.c:875:get_temp_info: ERROR: chain 2 can get NONE temp info or temp value abnormal, power it off
  2021-09-18 08:53:05 thread.c:1293:asic_status_monitor_thread: chain 2 can't get enough hashrate reg val for 5 times.
  2021-09-18 08:53:05 thread.c:1265:asic_status_monitor_thread: ERROR: chain 2 get hashrate_reg_counter 0, require 65, failed times 1
  2021-09-18 08:53:05 driver-btm-api.c:222:set_miner_status: ERROR_TEMP_LOST
  2021-09-18 08:53:05 driver-btm-api.c:156:stop_mining: stop mining: no chain exists, maybe caused by sensor lost

  2021-09-18 08:53:05 thread.c:1419:cancel_check_miner_status_thread: cancel thread
  2021-09-18 08:53:05 thread.c:1414:cancel_check_system_status_thread: cancel thread
  2021-09-18 08:53:05 thread.c:1403:cancel_read_nonce_reg_thread: cancel thread
  2021-09-18 08:53:05 thread.c:1343:cancel_asic_status_monitor_thread: cancel thread
  2021-09-18 08:53:05 driver-btm-api.c:141:killall_hashboard: ****power off hashboard****

   

  

   

  0

  Comment actions Permalink
• 

  Linda

  • September 18, 2021 09:53

  Dear,

  Sorry pls send it back for repair as it shows only hashbaord is working，the chip shows abnomal as well in kernel log. The following repair sites are for your info, thanks.

  Global Repair Site Delivery Addresses – Bitmain Support

  0

  Comment actions Permalink

Please sign in to leave a comment.