URGENT. MY ANTMINER DR5 SHOWS 0 ASIC AND TEMP SENSOR NOT WORKING

Answered

Comments

5 comments

  • Official comment

    Dear

    Please unplug and plug the power line to test it firstly,

    Then try to flash the sd card file to recover to the control board to try.

    Please download the SD card file in the below link

    https://service.bitmain.com/support/download?product=Flashing%20SD%20card%20with%20image

    Comment actions Permalink

    Hi I have the exact same issue, however, i have the Antminer DR5.

    0
    Comment actions Permalink

    Hello, 

    If there's anything wrong with the miner, you could send us a completed kernel log for further check, thanks!

    0
    Comment actions Permalink

    Hi Linda, thanks, the kernal log is below.

     

    Booting Linux on physical CPU 0x0
    Linux version 4.6.0-xilinx-ge7a4d3a-dirty (lzq@ubuntu) (gcc version 4.8.3 20140320 (prerelease) (Sourcery CodeBench Lite 2014.05-23) ) #38 SMP PREEMPT Fri Aug 24 11:14:38 CST 2018
    CPU: ARMv7 Processor [413fc090] revision 0 (ARMv7), cr=18c5387d
    CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
    Machine model: Xilinx Zynq
    cma: Reserved 16 MiB at 0x0e000000
    Memory policy: Data cache writealloc
    On node 0 totalpages: 61440
    free_area_init_node: node 0, pgdat c0938d00, node_mem_map cde10000
    Normal zone: 480 pages used for memmap
    Normal zone: 0 pages reserved
    Normal zone: 61440 pages, LIFO batch:15
    percpu: Embedded 12 pages/cpu @cddf1000 s19776 r8192 d21184 u49152
    pcpu-alloc: s19776 r8192 d21184 u49152 alloc=12*4096
    pcpu-alloc: [0] 0 [0] 1
    Built 1 zonelists in Zone order, mobility grouping on. Total pages: 60960
    Kernel command line: mem=240M console=ttyPS0,115200 ramdisk_size=33554432 root=/dev/ram rw earlyprintk
    PID hash table entries: 1024 (order: 0, 4096 bytes)
    Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
    Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
    Memory: 206004K/245760K available (5317K kernel code, 230K rwdata, 1844K rodata, 1024K init, 222K bss, 23372K reserved, 16384K cma-reserved, 0K highmem)
    Virtual kernel memory layout:
    vector : 0xffff0000 - 0xffff1000 ( 4 kB)
    fixmap : 0xffc00000 - 0xfff00000 (3072 kB)
    vmalloc : 0xcf800000 - 0xff800000 ( 768 MB)
    lowmem : 0xc0000000 - 0xcf000000 ( 240 MB)
    pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
    modules : 0xbf000000 - 0xbfe00000 ( 14 MB)
    .text : 0xc0008000 - 0xc07fe410 (8154 kB)
    .init : 0xc0800000 - 0xc0900000 (1024 kB)
    .data : 0xc0900000 - 0xc0939a60 ( 231 kB)
    .bss : 0xc0939a60 - 0xc09713e8 ( 223 kB)
    Preemptible hierarchical RCU implementation.
    Build-time adjustment of leaf fanout to 32.
    RCU restricting CPUs from NR_CPUS=4 to nr_cpu_ids=2.
    RCU: Adjusting geometry for rcu_fanout_leaf=32, nr_cpu_ids=2
    NR_IRQS:16 nr_irqs:16 16
    efuse mapped to cf800000
    ps7-slcr mapped to cf802000
    L2C: platform modifies aux control register: 0x72360000 -> 0x72760000
    L2C: DT/platform modifies aux control register: 0x72360000 -> 0x72760000
    L2C-310 erratum 769419 enabled
    L2C-310 enabling early BRESP for Cortex-A9
    L2C-310 full line of zeros enabled for Cortex-A9
    L2C-310 ID prefetch enabled, offset 1 lines
    L2C-310 dynamic clock gating enabled, standby mode enabled
    L2C-310 cache controller enabled, 8 ways, 512 kB
    L2C-310: CACHE_ID 0x410000c8, AUX_CTRL 0x76760001
    zynq_clock_init: clkc starts at cf802100
    Zynq clock init
    sched_clock: 64 bits at 333MHz, resolution 3ns, wraps every 4398046511103ns
    clocksource: arm_global_timer: mask: 0xffffffffffffffff max_cycles: 0x4ce07af025, max_idle_ns: 440795209040 ns
    Switching to timer-based delay loop, resolution 3ns
    clocksource: ttc_clocksource: mask: 0xffff max_cycles: 0xffff, max_idle_ns: 537538477 ns
    ps7-ttc #0 at cf80a000, irq=18
    Console: colour dummy device 80x30
    Calibrating delay loop (skipped), value calculated using timer frequency.. 666.66 BogoMIPS (lpj=3333333)
    pid_max: default: 32768 minimum: 301
    Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
    Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
    CPU: Testing write buffer coherency: ok
    CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
    Setting up static identity map for 0x100000 - 0x100058
    CPU1: failed to boot: -1
    Brought up 1 CPUs
    SMP: Total of 1 processors activated (666.66 BogoMIPS).
    CPU: All CPU(s) started in SVC mode.
    devtmpfs: initialized
    VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 4
    clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
    pinctrl core: initialized pinctrl subsystem
    NET: Registered protocol family 16
    DMA: preallocated 256 KiB pool for atomic coherent allocations
    cpuidle: using governor menu
    hw-breakpoint: found 5 (+1 reserved) breakpoint and 1 watchpoint registers.
    hw-breakpoint: maximum watchpoint size is 4 bytes.
    zynq-ocm f800c000.ps7-ocmc: ZYNQ OCM pool: 256 KiB @ 0xcf880000
    vgaarb: loaded
    SCSI subsystem initialized
    usbcore: registered new interface driver usbfs
    usbcore: registered new interface driver hub
    usbcore: registered new device driver usb
    media: Linux media interface: v0.10
    Linux video capture interface: v2.00
    pps_core: LinuxPPS API ver. 1 registered
    pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
    PTP clock support registered
    EDAC MC: Ver: 3.0.0
    Advanced Linux Sound Architecture Driver Initialized.
    clocksource: Switched to clocksource arm_global_timer
    NET: Registered protocol family 2
    TCP established hash table entries: 2048 (order: 1, 8192 bytes)
    TCP bind hash table entries: 2048 (order: 2, 16384 bytes)
    TCP: Hash tables configured (established 2048 bind 2048)
    UDP hash table entries: 256 (order: 1, 8192 bytes)
    UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
    NET: Registered protocol family 1
    RPC: Registered named UNIX socket transport module.
    RPC: Registered udp transport module.
    RPC: Registered tcp transport module.
    RPC: Registered tcp NFSv4.1 backchannel transport module.
    PCI: CLS 0 bytes, default 64
    Trying to unpack rootfs image as initramfs...
    rootfs image is not initramfs (no cpio magic); looks like an initrd
    Freeing initrd memory: 12380K (cceea000 - cdb01000)
    hw perfevents: enabled with armv7_cortex_a9 PMU driver, 7 counters available
    futex hash table entries: 512 (order: 3, 32768 bytes)
    workingset: timestamp_bits=28 max_order=16 bucket_order=0
    jffs2: version 2.2. (NAND) (SUMMARY) © 2001-2006 Red Hat, Inc.
    io scheduler noop registered
    io scheduler deadline registered
    io scheduler cfq registered (default)
    dma-pl330 f8003000.ps7-dma: Loaded driver for PL330 DMAC-241330
    dma-pl330 f8003000.ps7-dma: DBUFF-128x8bytes Num_Chans-8 Num_Peri-4 Num_Events-16
    e0000000.serial: ttyPS0 at MMIO 0xe0000000 (irq = 158, base_baud = 6249999) is a xuartps
    console [ttyPS0] enabled
    xdevcfg f8007000.ps7-dev-cfg: ioremap 0xf8007000 to cf86e000
    [drm] Initialized drm 1.1.0 20060810
    brd: module loaded
    loop: module loaded
    CAN device driver interface
    gpiod_set_value: invalid GPIO
    libphy: MACB_mii_bus: probed
    macb e000b000.ethernet eth0: Cadence GEM rev 0x00020118 at 0xe000b000 irq 31 (00:0a:35:00:00:00)
    Generic PHY e000b000.etherne:00: attached PHY driver [Generic PHY] (mii_bus:phy_addr=e000b000.etherne:00, irq=-1)
    e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k
    e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
    ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
    ehci-pci: EHCI PCI platform driver
    usbcore: registered new interface driver usb-storage
    mousedev: PS/2 mouse device common for all mice
    i2c /dev entries driver
    Xilinx Zynq CpuIdle Driver started
    sdhci: Secure Digital Host Controller Interface driver
    sdhci: Copyright(c) Pierre Ossman
    sdhci-pltfm: SDHCI platform and OF driver helper
    mmc0: SDHCI controller on e0100000.ps7-sdio [e0100000.ps7-sdio] using ADMA
    ledtrig-cpu: registered to indicate activity on CPUs
    usbcore: registered new interface driver usbhid
    usbhid: USB HID core driver
    nand: device found, Manufacturer ID: 0x2c, Chip ID: 0xda
    nand: Micron MT29F2G08ABAEAWP
    nand: 256 MiB, SLC, erase size: 128 KiB, page size: 2048, OOB size: 64
    nand: NAND_ECC_HW
    nand: NAND_ECC_HW_SYNDROME
    mtd->writesize = 2048
    ecc->strength = 1
    ecc->size = 2048
    mtd->writesize = 2048
    chip->ecc_strength_ds = 4
    chip->ecc_step_ds = 512
    nand: WARNING: pl35x-nand: the ECC used on your system is too weak compared to the one required by the NAND chip
    Bad block table found at page 131008, version 0x01
    Bad block table found at page 130944, version 0x01
    nand_read_bbt: bad block at 0x000002420000
    nand_read_bbt: bad block at 0x000002440000
    nand_read_bbt: bad block at 0x000002460000
    5 ofpart partitions found on MTD device pl35x-nand
    Creating 5 MTD partitions on "pl35x-nand":
    0x000000000000-0x000002800000 : "BOOT.bin-env-dts-kernel"
    0x000002800000-0x000004800000 : "ramfs"
    0x000004800000-0x000005000000 : "configs"
    0x000005000000-0x000006000000 : "reserve"
    0x000006000000-0x000008000000 : "ramfs-bak"
    NET: Registered protocol family 10
    sit: IPv6 over IPv4 tunneling driver
    NET: Registered protocol family 17
    can: controller area network core (rev 20120528 abi 9)
    NET: Registered protocol family 29
    can: raw protocol (rev 20120528)
    can: broadcast manager protocol (rev 20120528 t)
    can: netlink gateway (rev 20130117) max_hops=1
    zynq_pm_ioremap: no compatible node found for 'xlnx,zynq-ddrc-a05'
    zynq_pm_late_init: Unable to map DDRC IO memory.
    Registering SWP/SWPB emulation handler
    hctosys: unable to open rtc device (rtc0)
    ALSA device list:
    No soundcards found.
    RAMDISK: gzip image found at block 0
    EXT4-fs (ram0): couldn't mount as ext3 due to feature incompatibilities
    EXT4-fs (ram0): mounted filesystem without journal. Opts: (null)
    VFS: Mounted root (ext4 filesystem) on device 1:0.
    devtmpfs: mounted
    Freeing unused kernel memory: 1024K (c0800000 - c0900000)
    EXT4-fs (ram0): re-mounted. Opts: block_validity,delalloc,barrier,user_xattr
    random: dd urandom read with 0 bits of entropy available
    jffs2: notice: (694) check_node_data: wrong data CRC in data node at 0x007dd754: read 0xa01f9fbc, calculated 0x86f3a86.
    IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
    IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
    macb e000b000.ethernet eth0: unable to generate target frequency: 25000000 Hz
    macb e000b000.ethernet eth0: link up (100/Full)
    IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
    In axi fpga driver!
    request_mem_region OK!
    AXI fpga dev virtual address is 0xcf99c000
    *base_vir_addr = 0xab002
    In fpga mem driver!
    request_mem_region OK!
    fpga mem virtual address is 0xd2000000
    hrtimer: interrupt took 36222 ns
    Sep 23 09:00:17 (none) local0.err cgminer: Miner compile time: Tue Jul 16 17:51:07 CST 2019 type: Antminer DR5
    Sep 23 09:00:17 (none) local0.warn cgminer: Started cgminer 4.9.0
    Sep 23 09:00:17 (none) local0.notice cgminer[960]: bitmain_dcr_prepare, working in normal mode. frequency 600MHz.
    Sep 23 09:00:17 (none) local0.warn cgminer[960]: mmap axi_fpga_addr = 0xb6fa0000
    Sep 23 09:00:17 (none) local0.warn cgminer[960]: axi_fpga_addr data = 0xb002
    Sep 23 09:00:17 (none) local0.warn cgminer[960]: mmap fpga_mem_addr = 0xb5d44000
    Sep 23 09:00:17 (none) local0.warn cgminer[960]: bitmain_dcr_init
    Sep 23 09:00:17 (none) local0.notice cgminer[960]: Begain check_fan_speed
    Sep 23 09:00:19 (none) local0.notice cgminer[960]: check_fan_speed, check_fan_speed ok, dev.fan_num = 2
    Sep 23 09:00:19 (none) local0.notice cgminer[960]: detected chain 0
    Sep 23 09:00:19 (none) local0.notice cgminer[960]: detected chain 1
    Sep 23 09:00:19 (none) local0.notice cgminer[960]: detected chain 2
    Sep 23 09:00:19 (none) local0.warn cgminer[960]: detect total chain num 3
    Sep 23 09:00:19 (none) local0.notice cgminer[960]: power check ...
    Sep 23 09:00:20 (none) local0.notice cgminer[960]: power protocal f5, using package cmd
    Sep 23 09:00:20 (none) local0.notice cgminer[960]: power check OK!
    Sep 23 09:00:20 (none) local0.notice cgminer[960]: power on!
    Sep 23 09:00:20 (none) local0.notice cgminer[960]: init gpio907
    Sep 23 09:00:21 (none) local0.notice cgminer[960]: every_chain_reset_PIC16F1704_pic_new
    Sep 23 09:00:22 (none) local0.notice cgminer[960]: reset_PIC16F1704_pic_new ok
    Sep 23 09:00:23 (none) local0.notice cgminer[960]: reset_PIC16F1704_pic_new ok
    Sep 23 09:00:24 (none) local0.notice cgminer[960]: reset_PIC16F1704_pic_new ok
    Sep 23 09:00:25 (none) local0.notice cgminer[960]: every_chain_jump_from_loader_to_app_PIC16F1704_new
    Sep 23 09:00:25 (none) local0.notice cgminer[960]: jump_from_loader_to_app_PIC16F1704_new ok
    Sep 23 09:00:26 (none) local0.notice cgminer[960]: jump_from_loader_to_app_PIC16F1704_new ok
    Sep 23 09:00:26 (none) local0.notice cgminer[960]: jump_from_loader_to_app_PIC16F1704_new ok
    Sep 23 09:00:27 (none) local0.notice cgminer[960]: power_set_da_value, 55, aa, 06, 83, 84, 00, 0d, 01
    Sep 23 09:00:27 (none) local0.notice cgminer[960]: pic_heart_beat_func_new
    Sep 23 09:00:28 (none) local0.notice cgminer[960]: power_send_cmd, reply_buf[0]=55
    Sep 23 09:00:28 (none) local0.notice cgminer[960]: power_send_cmd, reply_buf[1]=aa
    Sep 23 09:00:28 (none) local0.notice cgminer[960]: power_send_cmd, reply_buf[2]=06
    Sep 23 09:00:28 (none) local0.notice cgminer[960]: power_send_cmd, reply_buf[3]=83
    Sep 23 09:00:28 (none) local0.notice cgminer[960]: power_send_cmd, reply_buf[4]=84
    Sep 23 09:00:29 (none) local0.notice cgminer[960]: power_send_cmd, reply_buf[5]=00
    Sep 23 09:00:29 (none) local0.notice cgminer[960]: power_send_cmd, reply_buf[6]=0d
    Sep 23 09:00:29 (none) local0.notice cgminer[960]: power_send_cmd, reply_buf[7]=01
    Sep 23 09:00:29 (none) local0.notice cgminer[960]: bitmain_dcr_init, dev.voltage=870, pic_voltage=132
    Sep 23 09:00:29 (none) local0.notice cgminer[960]: chain 0 eeprom test pass
    Sep 23 09:00:29 (none) local0.notice cgminer[960]: chain 1 eeprom test pass
    Sep 23 09:00:29 (none) local0.notice cgminer[960]: chain 2 eeprom test pass
    Sep 23 09:00:30 (none) local0.notice cgminer[960]: chain 0 eeprom mh(0x55 0xaa) lp vol 80 freq 60 vol 87 crc5 0x1b
    Sep 23 09:00:30 (none) local0.notice cgminer[960]: chain 1 eeprom mh(0x55 0xaa) lp vol 80 freq 60 vol 87 crc5 0x1b
    Sep 23 09:00:30 (none) local0.notice cgminer[960]: chain 2 eeprom mh(0x55 0xaa) lp vol 80 freq 60 vol 87 crc5 0x1b
    Sep 23 09:00:30 (none) local0.notice cgminer[960]: chain 0 read out voltage data 87 voltagge 870
    Sep 23 09:00:30 (none) local0.notice cgminer[960]: chain 1 read out voltage data 87 voltagge 870
    Sep 23 09:00:30 (none) local0.notice cgminer[960]: chain 2 read out voltage data 87 voltagge 870
    Sep 23 09:00:30 (none) local0.notice cgminer[960]: every_chain_enable_PIC16F1704_dc_dc_new
    Sep 23 09:00:30 (none) local0.notice cgminer[960]: enable_PIC16F1704_dc_dc_new ok
    Sep 23 09:00:30 (none) local0.notice cgminer[960]: enable_PIC16F1704_dc_dc_new ok
    Sep 23 09:00:30 (none) local0.notice cgminer[960]: enable_PIC16F1704_dc_dc_new ok
    Sep 23 09:00:31 (none) local0.notice cgminer[960]: tty_init
    Sep 23 09:00:31 (none) local0.notice cgminer[960]: MISC_CONTROL : 7002001
    Sep 23 09:00:31 (none) local0.notice cgminer[960]: MISC_CONTROL : 7002001
    Sep 23 09:00:31 (none) local0.notice cgminer[960]: MISC_CONTROL : 7002001
    Sep 23 09:00:31 (none) local0.notice cgminer[960]: tty_init_chain
    Sep 23 09:00:31 (none) local0.err cgminer[960]: create rx read thread for chain 0
    Sep 23 09:00:31 (none) local0.err cgminer[960]: create rx read thread for chain 0 ok
    Sep 23 09:00:31 (none) local0.notice cgminer[960]: Start A New Asic Response.Chain:[0]
    Sep 23 09:00:31 (none) local0.notice cgminer[960]: open device over
    Sep 23 09:00:31 (none) local0.notice cgminer[960]: tty_init_chain
    Sep 23 09:00:31 (none) local0.err cgminer[960]: create rx read thread for chain 1
    Sep 23 09:00:31 (none) local0.err cgminer[960]: create rx read thread for chain 1 ok
    Sep 23 09:00:31 (none) local0.notice cgminer[960]: Start A New Asic Response.Chain:[1]
    Sep 23 09:00:31 (none) local0.notice cgminer[960]: open device over
    Sep 23 09:00:31 (none) local0.notice cgminer[960]: tty_init_chain
    Sep 23 09:00:31 (none) local0.err cgminer[960]: create rx read thread for chain 2
    Sep 23 09:00:31 (none) local0.err cgminer[960]: create rx read thread for chain 2 ok
    Sep 23 09:00:31 (none) local0.notice cgminer[960]: Start A New Asic Response.Chain:[2]
    Sep 23 09:00:31 (none) local0.notice cgminer[960]: open device over
    Sep 23 09:00:31 (none) local0.notice cgminer[960]: tty_init_chain
    Sep 23 09:00:31 (none) local0.notice cgminer[960]: open device over
    Sep 23 09:00:31 (none) local0.notice cgminer[960]: IO Thread #b39ff470 using high-priority scheduler!
    Sep 23 09:00:32 (none) local0.notice cgminer[960]: check_every_chain_asic_number
    Sep 23 09:00:32 (none) local0.warn cgminer[960]: check_asic_reg: Chain0 has 0 ASICs
    Sep 23 09:00:32 (none) local0.warn cgminer[960]: check_asic_reg: Chain1 has 0 ASICs
    Sep 23 09:00:32 (none) local0.warn cgminer[960]: check_asic_reg: Chain2 has 0 ASICs
    Sep 23 09:00:33 (none) local0.notice cgminer[960]: power off!
    Sep 23 09:00:34 (none) local0.notice cgminer[960]: power on!
    Sep 23 09:00:36 (none) local0.notice cgminer[960]: tty_init
    Sep 23 09:00:36 (none) local0.notice cgminer[960]: MISC_CONTROL : 7002001
    Sep 23 09:00:36 (none) local0.notice cgminer[960]: MISC_CONTROL : 7002001
    Sep 23 09:00:36 (none) local0.notice cgminer[960]: MISC_CONTROL : 7002001
    Sep 23 09:00:36 (none) local0.notice cgminer[960]: tty_init_chain
    Sep 23 09:00:36 (none) local0.err cgminer[960]: create rx read thread for chain 0
    Sep 23 09:00:36 (none) local0.err cgminer[960]: create rx read thread for chain 0 ok
    Sep 23 09:00:36 (none) local0.notice cgminer[960]: Start A New Asic Response.Chain:[0]
    Sep 23 09:00:37 (none) local0.notice cgminer[960]: open device over
    Sep 23 09:00:37 (none) local0.notice cgminer[960]: tty_init_chain
    Sep 23 09:00:37 (none) local0.err cgminer[960]: create rx read thread for chain 1
    Sep 23 09:00:37 (none) local0.err cgminer[960]: create rx read thread for chain 1 ok
    Sep 23 09:00:37 (none) local0.notice cgminer[960]: Start A New Asic Response.Chain:[1]
    Sep 23 09:00:37 (none) local0.notice cgminer[960]: open device over
    Sep 23 09:00:37 (none) local0.notice cgminer[960]: tty_init_chain
    Sep 23 09:00:37 (none) local0.err cgminer[960]: create rx read thread for chain 2
    Sep 23 09:00:37 (none) local0.err cgminer[960]: create rx read thread for chain 2 ok
    Sep 23 09:00:37 (none) local0.notice cgminer[960]: Start A New Asic Response.Chain:[2]
    Sep 23 09:00:37 (none) local0.notice cgminer[960]: open device over
    Sep 23 09:00:37 (none) local0.notice cgminer[960]: tty_init_chain
    Sep 23 09:00:37 (none) local0.notice cgminer[960]: open device over
    Sep 23 09:00:37 (none) local0.notice cgminer[960]: IO Thread #b29ff470 using high-priority scheduler!
    Sep 23 09:00:37 (none) local0.notice cgminer[960]: tty_init
    Sep 23 09:00:37 (none) local0.notice cgminer[960]: MISC_CONTROL : 7002001
    Sep 23 09:00:37 (none) local0.notice cgminer[960]: MISC_CONTROL : 7002001
    Sep 23 09:00:37 (none) local0.notice cgminer[960]: MISC_CONTROL : 7002001
    Sep 23 09:00:37 (none) local0.notice cgminer[960]: tty_init_chain
    Sep 23 09:00:37 (none) local0.err cgminer[960]: create rx read thread for chain 0
    Sep 23 09:00:37 (none) local0.err cgminer[960]: create rx read thread for chain 0 ok
    Sep 23 09:00:37 (none) local0.notice cgminer[960]: Start A New Asic Response.Chain:[0]
    Sep 23 09:00:37 (none) local0.notice cgminer[960]: open device over
    Sep 23 09:00:37 (none) local0.notice cgminer[960]: tty_init_chain
    Sep 23 09:00:37 (none) local0.err cgminer[960]: create rx read thread for chain 1
    Sep 23 09:00:37 (none) local0.err cgminer[960]: create rx read thread for chain 1 ok
    Sep 23 09:00:37 (none) local0.notice cgminer[960]: Start A New Asic Response.Chain:[1]
    Sep 23 09:00:37 (none) local0.notice cgminer[960]: open device over
    Sep 23 09:00:37 (none) local0.notice cgminer[960]: tty_init_chain
    Sep 23 09:00:37 (none) local0.err cgminer[960]: create rx read thread for chain 2
    Sep 23 09:00:37 (none) local0.err cgminer[960]: create rx read thread for chain 2 ok
    Sep 23 09:00:37 (none) local0.notice cgminer[960]: Start A New Asic Response.Chain:[2]
    Sep 23 09:00:37 (none) local0.notice cgminer[960]: open device over
    Sep 23 09:00:37 (none) local0.notice cgminer[960]: tty_init_chain
    Sep 23 09:00:37 (none) local0.notice cgminer[960]: open device over
    Sep 23 09:00:37 (none) local0.notice cgminer[960]: IO Thread #b09ff470 using high-priority scheduler!
    Sep 23 09:00:37 (none) local0.notice cgminer[960]: tty_init
    Sep 23 09:00:37 (none) local0.notice cgminer[960]: MISC_CONTROL : 7002001
    Sep 23 09:00:37 (none) local0.notice cgminer[960]: MISC_CONTROL : 7002001
    Sep 23 09:00:37 (none) local0.notice cgminer[960]: MISC_CONTROL : 7002001
    Sep 23 09:00:37 (none) local0.notice cgminer[960]: tty_init_chain
    Sep 23 09:00:37 (none) local0.err cgminer[960]: create rx read thread for chain 0
    Sep 23 09:00:37 (none) local0.err cgminer[960]: create rx read thread for chain 0 ok
    Sep 23 09:00:37 (none) local0.notice cgminer[960]: Start A New Asic Response.Chain:[0]
    Sep 23 09:00:37 (none) local0.notice cgminer[960]: open device over
    Sep 23 09:00:37 (none) local0.notice cgminer[960]: tty_init_chain
    Sep 23 09:00:37 (none) local0.err cgminer[960]: create rx read thread for chain 1
    Sep 23 09:00:37 (none) local0.err cgminer[960]: create rx read thread for chain 1 ok
    Sep 23 09:00:37 (none) local0.notice cgminer[960]: Start A New Asic Response.Chain:[1]
    Sep 23 09:00:37 (none) local0.notice cgminer[960]: open device over
    Sep 23 09:00:37 (none) local0.notice cgminer[960]: tty_init_chain
    Sep 23 09:00:37 (none) local0.err cgminer[960]: create rx read thread for chain 2
    Sep 23 09:00:37 (none) local0.err cgminer[960]: create rx read thread for chain 2 ok
    Sep 23 09:00:37 (none) local0.notice cgminer[960]: Start A New Asic Response.Chain:[2]
    Sep 23 09:00:37 (none) local0.notice cgminer[960]: open device over
    Sep 23 09:00:37 (none) local0.notice cgminer[960]: tty_init_chain
    Sep 23 09:00:37 (none) local0.notice cgminer[960]: open device over
    Sep 23 09:00:37 (none) local0.notice cgminer[960]: IO Thread #ae9ff470 using high-priority scheduler!
    Sep 23 09:00:37 (none) local0.notice cgminer[960]: check_every_chain_asic_number
    Sep 23 09:00:38 (none) local0.warn cgminer[960]: check_asic_reg: Chain0 has 0 ASICs
    Sep 23 09:00:38 (none) local0.warn cgminer[960]: check_asic_reg: Chain1 has 0 ASICs
    Sep 23 09:00:38 (none) local0.warn cgminer[960]: check_asic_reg: Chain2 has 0 ASICs
    Sep 23 09:00:38 (none) local0.notice cgminer[960]: recheck_asic_num DONE!
    Sep 23 09:00:38 (none) local0.notice cgminer[960]: power off!
    Sep 23 09:00:40 (none) local0.notice cgminer[960]: power on!
    Sep 23 09:00:42 (none) local0.notice cgminer[960]: tty_init
    Sep 23 09:00:42 (none) local0.notice cgminer[960]: MISC_CONTROL : 7002001
    Sep 23 09:00:42 (none) local0.notice cgminer[960]: MISC_CONTROL : 7002001
    Sep 23 09:00:42 (none) local0.notice cgminer[960]: MISC_CONTROL : 7002001
    Sep 23 09:00:42 (none) local0.notice cgminer[960]: tty_init_chain
    Sep 23 09:00:42 (none) local0.err cgminer[960]: create rx read thread for chain 0
    Sep 23 09:00:42 (none) local0.err cgminer[960]: create rx read thread for chain 0 ok
    Sep 23 09:00:42 (none) local0.notice cgminer[960]: Start A New Asic Response.Chain:[0]
    Sep 23 09:00:42 (none) local0.notice cgminer[960]: open device over
    Sep 23 09:00:42 (none) local0.notice cgminer[960]: tty_init_chain
    Sep 23 09:00:42 (none) local0.err cgminer[960]: create rx read thread for chain 1
    Sep 23 09:00:42 (none) local0.err cgminer[960]: create rx read thread for chain 1 ok
    Sep 23 09:00:42 (none) local0.notice cgminer[960]: Start A New Asic Response.Chain:[1]
    Sep 23 09:00:42 (none) local0.notice cgminer[960]: open device over
    Sep 23 09:00:42 (none) local0.notice cgminer[960]: tty_init_chain
    Sep 23 09:00:42 (none) local0.err cgminer[960]: create rx read thread for chain 2
    Sep 23 09:00:42 (none) local0.err cgminer[960]: create rx read thread for chain 2 ok
    Sep 23 09:00:42 (none) local0.notice cgminer[960]: Start A New Asic Response.Chain:[2]
    Sep 23 09:00:42 (none) local0.notice cgminer[960]: open device over
    Sep 23 09:00:42 (none) local0.notice cgminer[960]: tty_init_chain
    Sep 23 09:00:42 (none) local0.notice cgminer[960]: open device over
    Sep 23 09:00:42 (none) local0.notice cgminer[960]: IO Thread #b53ff470 using high-priority scheduler!
    Sep 23 09:00:42 (none) local0.notice cgminer[960]: tty_init
    Sep 23 09:00:42 (none) local0.notice cgminer[960]: MISC_CONTROL : 7002001
    Sep 23 09:00:42 (none) local0.notice cgminer[960]: MISC_CONTROL : 7002001
    Sep 23 09:00:42 (none) local0.notice cgminer[960]: MISC_CONTROL : 7002001
    Sep 23 09:00:42 (none) local0.notice cgminer[960]: tty_init_chain
    Sep 23 09:00:42 (none) local0.err cgminer[960]: create rx read thread for chain 0
    Sep 23 09:00:42 (none) local0.err cgminer[960]: create rx read thread for chain 0 ok
    Sep 23 09:00:42 (none) local0.notice cgminer[960]: Start A New Asic Response.Chain:[0]
    Sep 23 09:00:42 (none) local0.notice cgminer[960]: open device over
    Sep 23 09:00:42 (none) local0.notice cgminer[960]: tty_init_chain
    Sep 23 09:00:42 (none) local0.err cgminer[960]: create rx read thread for chain 1
    Sep 23 09:00:42 (none) local0.err cgminer[960]: create rx read thread for chain 1 ok
    Sep 23 09:00:42 (none) local0.notice cgminer[960]: Start A New Asic Response.Chain:[1]
    Sep 23 09:00:43 (none) local0.notice cgminer[960]: open device over
    Sep 23 09:00:43 (none) local0.notice cgminer[960]: tty_init_chain
    Sep 23 09:00:43 (none) local0.err cgminer[960]: create rx read thread for chain 2
    Sep 23 09:00:43 (none) local0.err cgminer[960]: create rx read thread for chain 2 ok
    Sep 23 09:00:43 (none) local0.notice cgminer[960]: Start A New Asic Response.Chain:[2]
    Sep 23 09:00:43 (none) local0.notice cgminer[960]: open device over
    Sep 23 09:00:43 (none) local0.notice cgminer[960]: tty_init_chain
    Sep 23 09:00:43 (none) local0.notice cgminer[960]: open device over
    Sep 23 09:00:43 (none) local0.notice cgminer[960]: IO Thread #b11ff470 using high-priority scheduler!
    Sep 23 09:00:43 (none) local0.notice cgminer[960]: tty_init
    Sep 23 09:00:43 (none) local0.notice cgminer[960]: MISC_CONTROL : 7002001
    Sep 23 09:00:43 (none) local0.notice cgminer[960]: MISC_CONTROL : 7002001
    Sep 23 09:00:43 (none) local0.notice cgminer[960]: MISC_CONTROL : 7002001
    Sep 23 09:00:43 (none) local0.notice cgminer[960]: tty_init_chain
    Sep 23 09:00:43 (none) local0.err cgminer[960]: create rx read thread for chain 0
    Sep 23 09:00:43 (none) local0.err cgminer[960]: create rx read thread for chain 0 ok
    Sep 23 09:00:43 (none) local0.notice cgminer[960]: Start A New Asic Response.Chain:[0]
    Sep 23 09:00:43 (none) local0.notice cgminer[960]: open device over
    Sep 23 09:00:43 (none) local0.notice cgminer[960]: tty_init_chain
    Sep 23 09:00:43 (none) local0.err cgminer[960]: create rx read thread for chain 1
    Sep 23 09:00:43 (none) local0.err cgminer[960]: create rx read thread for chain 1 ok
    Sep 23 09:00:43 (none) local0.notice cgminer[960]: Start A New Asic Response.Chain:[1]
    Sep 23 09:00:43 (none) local0.notice cgminer[960]: open device over
    Sep 23 09:00:43 (none) local0.notice cgminer[960]: tty_init_chain
    Sep 23 09:00:43 (none) local0.err cgminer[960]: create rx read thread for chain 2
    Sep 23 09:00:43 (none) local0.err cgminer[960]: create rx read thread for chain 2 ok
    Sep 23 09:00:43 (none) local0.notice cgminer[960]: Start A New Asic Response.Chain:[2]
    Sep 23 09:00:43 (none) local0.notice cgminer[960]: open device over
    Sep 23 09:00:43 (none) local0.notice cgminer[960]: tty_init_chain
    Sep 23 09:00:43 (none) local0.notice cgminer[960]: open device over
    Sep 23 09:00:43 (none) local0.notice cgminer[960]: IO Thread #ad1ff470 using high-priority scheduler!
    Sep 23 09:00:43 (none) local0.notice cgminer[960]: check_every_chain_asic_number
    Sep 23 09:00:43 (none) local0.warn cgminer[960]: check_asic_reg: Chain0 has 0 ASICs
    Sep 23 09:00:44 (none) local0.warn cgminer[960]: check_asic_reg: Chain1 has 0 ASICs
    Sep 23 09:00:44 (none) local0.warn cgminer[960]: check_asic_reg: Chain2 has 0 ASICs
    Sep 23 09:00:44 (none) local0.notice cgminer[960]: recheck_asic_num DONE!
    Sep 23 09:00:44 (none) local0.notice cgminer[960]: power off!
    Sep 23 09:00:46 (none) local0.notice cgminer[960]: power on!
    Sep 23 09:00:48 (none) local0.notice cgminer[960]: tty_init
    Sep 23 09:00:48 (none) local0.notice cgminer[960]: MISC_CONTROL : 7002001
    Sep 23 09:00:48 (none) local0.notice cgminer[960]: MISC_CONTROL : 7002001
    Sep 23 09:00:48 (none) local0.notice cgminer[960]: MISC_CONTROL : 7002001
    Sep 23 09:00:48 (none) local0.notice cgminer[960]: tty_init_chain
    Sep 23 09:00:48 (none) local0.err cgminer[960]: create rx read thread for chain 0
    Sep 23 09:00:48 (none) local0.err cgminer[960]: create rx read thread for chain 0 ok
    Sep 23 09:00:48 (none) local0.notice cgminer[960]: Start A New Asic Response.Chain:[0]
    Sep 23 09:00:48 (none) local0.notice cgminer[960]: open device over
    Sep 23 09:00:48 (none) local0.notice cgminer[960]: tty_init_chain
    Sep 23 09:00:48 (none) local0.err cgminer[960]: create rx read thread for chain 1
    Sep 23 09:00:48 (none) local0.err cgminer[960]: create rx read thread for chain 1 ok
    Sep 23 09:00:48 (none) local0.notice cgminer[960]: Start A New Asic Response.Chain:[1]
    Sep 23 09:00:48 (none) local0.notice cgminer[960]: open device over
    Sep 23 09:00:48 (none) local0.notice cgminer[960]: tty_init_chain
    Sep 23 09:00:48 (none) local0.err cgminer[960]: create rx read thread for chain 2
    Sep 23 09:00:48 (none) local0.err cgminer[960]: create rx read thread for chain 2 ok
    Sep 23 09:00:48 (none) local0.notice cgminer[960]: Start A New Asic Response.Chain:[2]
    Sep 23 09:00:48 (none) local0.notice cgminer[960]: open device over
    Sep 23 09:00:48 (none) local0.notice cgminer[960]: tty_init_chain
    Sep 23 09:00:48 (none) local0.notice cgminer[960]: open device over
    Sep 23 09:00:48 (none) local0.notice cgminer[960]: IO Thread #b41ff470 using high-priority scheduler!
    Sep 23 09:00:48 (none) local0.notice cgminer[960]: tty_init
    Sep 23 09:00:48 (none) local0.notice cgminer[960]: MISC_CONTROL : 7002001
    Sep 23 09:00:48 (none) local0.notice cgminer[960]: MISC_CONTROL : 7002001
    Sep 23 09:00:48 (none) local0.notice cgminer[960]: MISC_CONTROL : 7002001
    Sep 23 09:00:48 (none) local0.notice cgminer[960]: tty_init_chain
    Sep 23 09:00:48 (none) local0.err cgminer[960]: create rx read thread for chain 0
    Sep 23 09:00:48 (none) local0.err cgminer[960]: create rx read thread for chain 0 ok
    Sep 23 09:00:48 (none) local0.notice cgminer[960]: Start A New Asic Response.Chain:[0]
    Sep 23 09:00:48 (none) local0.notice cgminer[960]: open device over
    Sep 23 09:00:48 (none) local0.notice cgminer[960]: tty_init_chain
    Sep 23 09:00:48 (none) local0.err cgminer[960]: create rx read thread for chain 1
    Sep 23 09:00:48 (none) local0.err cgminer[960]: create rx read thread for chain 1 ok
    Sep 23 09:00:48 (none) local0.notice cgminer[960]: Start A New Asic Response.Chain:[1]
    Sep 23 09:00:48 (none) local0.notice cgminer[960]: open device over
    Sep 23 09:00:48 (none) local0.notice cgminer[960]: tty_init_chain
    Sep 23 09:00:48 (none) local0.err cgminer[960]: create rx read thread for chain 2
    Sep 23 09:00:48 (none) local0.err cgminer[960]: create rx read thread for chain 2 ok
    Sep 23 09:00:48 (none) local0.notice cgminer[960]: Start A New Asic Response.Chain:[2]
    Sep 23 09:00:48 (none) local0.notice cgminer[960]: open device over
    Sep 23 09:00:48 (none) local0.notice cgminer[960]: tty_init_chain
    Sep 23 09:00:48 (none) local0.notice cgminer[960]: open device over
    Sep 23 09:00:48 (none) local0.notice cgminer[960]: IO Thread #af9ff470 using high-priority scheduler!
    Sep 23 09:00:48 (none) local0.notice cgminer[960]: tty_init
    Sep 23 09:00:48 (none) local0.notice cgminer[960]: MISC_CONTROL : 7002001
    Sep 23 09:00:48 (none) local0.notice cgminer[960]: MISC_CONTROL : 7002001
    Sep 23 09:00:48 (none) local0.notice cgminer[960]: MISC_CONTROL : 7002001
    Sep 23 09:00:48 (none) local0.notice cgminer[960]: tty_init_chain
    Sep 23 09:00:48 (none) local0.err cgminer[960]: create rx read thread for chain 0
    Sep 23 09:00:48 (none) local0.err cgminer[960]: create rx read thread for chain 0 ok
    Sep 23 09:00:48 (none) local0.notice cgminer[960]: Start A New Asic Response.Chain:[0]
    Sep 23 09:00:48 (none) local0.notice cgminer[960]: open device over
    Sep 23 09:00:48 (none) local0.notice cgminer[960]: tty_init_chain
    Sep 23 09:00:48 (none) local0.err cgminer[960]: create rx read thread for chain 1
    Sep 23 09:00:48 (none) local0.err cgminer[960]: create rx read thread for chain 1 ok
    Sep 23 09:00:48 (none) local0.notice cgminer[960]: Start A New Asic Response.Chain:[1]
    Sep 23 09:00:48 (none) local0.notice cgminer[960]: open device over
    Sep 23 09:00:48 (none) local0.notice cgminer[960]: tty_init_chain
    Sep 23 09:00:48 (none) local0.err cgminer[960]: create rx read thread for chain 2
    Sep 23 09:00:48 (none) local0.err cgminer[960]: create rx read thread for chain 2 ok
    Sep 23 09:00:48 (none) local0.notice cgminer[960]: Start A New Asic Response.Chain:[2]
    Sep 23 09:00:49 (none) local0.notice cgminer[960]: open device over
    Sep 23 09:00:49 (none) local0.notice cgminer[960]: tty_init_chain
    Sep 23 09:00:49 (none) local0.notice cgminer[960]: open device over
    Sep 23 09:00:49 (none) local0.notice cgminer[960]: IO Thread #ab9ff470 using high-priority scheduler!
    Sep 23 09:00:49 (none) local0.notice cgminer[960]: check_every_chain_asic_number
    Sep 23 09:00:49 (none) local0.warn cgminer[960]: check_asic_reg: Chain0 has 0 ASICs
    Sep 23 09:00:49 (none) local0.warn cgminer[960]: check_asic_reg: Chain1 has 0 ASICs
    Sep 23 09:00:50 (none) local0.warn cgminer[960]: check_asic_reg: Chain2 has 0 ASICs
    Sep 23 09:00:50 (none) local0.notice cgminer[960]: recheck_asic_num DONE!
    Sep 23 09:00:50 (none) local0.notice cgminer[960]: calculate_address_interval: temp_asic_number = 128, addrInterval = 1
    Sep 23 09:00:50 (none) local0.notice cgminer[960]: software_set_address_chain: chain 0 has 0 ASIC, and addrInterval is 1
    Sep 23 09:00:50 (none) local0.notice cgminer[960]: Now Set [0] Chain Address
    Sep 23 09:00:51 (none) local0.notice cgminer[960]: software_set_address_chain: chain 1 has 0 ASIC, and addrInterval is 1
    Sep 23 09:00:51 (none) local0.notice cgminer[960]: Now Set [1] Chain Address
    Sep 23 09:00:51 (none) local0.notice cgminer[960]: software_set_address_chain: chain 2 has 0 ASIC, and addrInterval is 1
    Sep 23 09:00:51 (none) local0.notice cgminer[960]: Now Set [2] Chain Address
    Sep 23 09:00:52 (none) local0.notice cgminer[960]: check_every_chain_asic_number
    Sep 23 09:00:52 (none) local0.warn cgminer[960]: check_asic_reg: Chain0 has 0 ASICs
    Sep 23 09:00:53 (none) local0.warn cgminer[960]: check_asic_reg: Chain1 has 0 ASICs
    Sep 23 09:00:53 (none) local0.warn cgminer[960]: check_asic_reg: Chain2 has 0 ASICs
    Sep 23 09:00:53 (none) local0.notice cgminer[960]: set_ticket_mask ticket_mask = 0x00000028
    Sep 23 09:00:53 (none) local0.notice cgminer[960]: set_frequency_chain: chian = 0 freq = 600.000000
    Sep 23 09:00:53 (none) local0.notice cgminer[960]: set_frequency_chain: pll_param = c0c00211, divider = 03, pll_freq = 2400.000000
    Sep 23 09:00:53 (none) local0.notice cgminer[960]: set_frequency_chain: chian = 1 freq = 600.000000
    Sep 23 09:00:53 (none) local0.notice cgminer[960]: set_frequency_chain: pll_param = c0c00211, divider = 03, pll_freq = 2400.000000
    Sep 23 09:00:53 (none) local0.notice cgminer[960]: set_frequency_chain: chian = 2 freq = 600.000000
    Sep 23 09:00:53 (none) local0.notice cgminer[960]: set_frequency_chain: pll_param = c0c00211, divider = 03, pll_freq = 2400.000000
    Sep 23 09:00:53 (none) local0.notice cgminer[960]: enable_read_temperature_from_asic_chain: reg_value = 0x07006061
    Sep 23 09:00:53 (none) local0.notice cgminer[960]: enable_read_temperature_from_asic_chain: reg_value = 0x07006061
    Sep 23 09:00:53 (none) local0.notice cgminer[960]: enable_read_temperature_from_asic_chain: reg_value = 0x07006061
    Sep 23 09:00:53 (none) local0.notice cgminer[960]: select_core_to_check_temperature_chain: diode_mux_sel = 1
    Sep 23 09:00:53 (none) local0.notice cgminer[960]: select_core_to_check_temperature_chain: diode_mux_sel = 1
    Sep 23 09:00:53 (none) local0.notice cgminer[960]: select_core_to_check_temperature_chain: diode_mux_sel = 1
    Sep 23 09:00:53 (none) local0.notice cgminer[960]: calibration_sensor_offset
    Sep 23 09:00:53 (none) local0.notice cgminer[960]: 0 calibration_sensor_offset_chain
    Sep 23 09:00:54 (none) local0.notice cgminer[960]: chain:0 local:0 remote:0
    Sep 23 09:00:54 (none) local0.warn cgminer[960]: Chain 0 set_temperature_offset_value_chain_sensor
    Sep 23 09:00:55 (none) local0.notice cgminer[960]: set_temperature_offset_value_chain_sensor: Chain0 Sensor0 temp offset : 00,
    Sep 23 09:00:55 (none) local0.notice cgminer[960]: chain:0 local:0 remote:0
    Sep 23 09:00:55 (none) local0.warn cgminer[960]: Chain 0 set_temperature_offset_value_chain_sensor
    Sep 23 09:00:56 (none) local0.notice cgminer[960]: set_temperature_offset_value_chain_sensor: Chain0 Sensor1 temp offset : 00,
    Sep 23 09:00:57 (none) local0.notice cgminer[960]: chain:0 local:0 remote:0
    Sep 23 09:00:57 (none) local0.warn cgminer[960]: Chain 0 set_temperature_offset_value_chain_sensor
    Sep 23 09:00:57 (none) local0.notice cgminer[960]: set_temperature_offset_value_chain_sensor: Chain0 Sensor2 temp offset : 00,
    Sep 23 09:00:58 (none) local0.notice cgminer[960]: chain:0 local:0 remote:0
    Sep 23 09:00:58 (none) local0.warn cgminer[960]: Chain 0 set_temperature_offset_value_chain_sensor
    Sep 23 09:00:59 (none) local0.notice cgminer[960]: set_temperature_offset_value_chain_sensor: Chain0 Sensor3 temp offset : 00,
    Sep 23 09:00:59 (none) local0.notice cgminer[960]: 1 calibration_sensor_offset_chain
    Sep 23 09:00:59 (none) local0.notice cgminer[960]: chain:1 local:0 remote:0
    Sep 23 09:00:59 (none) local0.warn cgminer[960]: Chain 1 set_temperature_offset_value_chain_sensor
    Sep 23 09:01:00 (none) local0.notice cgminer[960]: set_temperature_offset_value_chain_sensor: Chain1 Sensor0 temp offset : 00,
    Sep 23 09:01:01 (none) local0.notice cgminer[960]: chain:1 local:0 remote:0
    Sep 23 09:01:01 (none) local0.warn cgminer[960]: Chain 1 set_temperature_offset_value_chain_sensor
    Sep 23 09:01:02 (none) local0.notice cgminer[960]: set_temperature_offset_value_chain_sensor: Chain1 Sensor1 temp offset : 00,
    Sep 23 09:01:02 (none) local0.notice cgminer[960]: chain:1 local:0 remote:0
    Sep 23 09:01:02 (none) local0.warn cgminer[960]: Chain 1 set_temperature_offset_value_chain_sensor
    Sep 23 09:01:03 (none) local0.notice cgminer[960]: set_temperature_offset_value_chain_sensor: Chain1 Sensor2 temp offset : 00,
    Sep 23 09:01:04 (none) local0.notice cgminer[960]: chain:1 local:0 remote:0
    Sep 23 09:01:04 (none) local0.warn cgminer[960]: Chain 1 set_temperature_offset_value_chain_sensor
    Sep 23 09:01:04 (none) local0.notice cgminer[960]: set_temperature_offset_value_chain_sensor: Chain1 Sensor3 temp offset : 00,
    Sep 23 09:01:04 (none) local0.notice cgminer[960]: 2 calibration_sensor_offset_chain
    Sep 23 09:01:05 (none) local0.notice cgminer[960]: chain:2 local:0 remote:0
    Sep 23 09:01:05 (none) local0.warn cgminer[960]: Chain 2 set_temperature_offset_value_chain_sensor
    Sep 23 09:01:06 (none) local0.notice cgminer[960]: set_temperature_offset_value_chain_sensor: Chain2 Sensor0 temp offset : 00,
    Sep 23 09:01:06 (none) local0.notice cgminer[960]: chain:2 local:0 remote:0
    Sep 23 09:01:06 (none) local0.warn cgminer[960]: Chain 2 set_temperature_offset_value_chain_sensor
    Sep 23 09:01:07 (none) local0.notice cgminer[960]: set_temperature_offset_value_chain_sensor: Chain2 Sensor1 temp offset : 00,
    Sep 23 09:01:08 (none) local0.notice cgminer[960]: chain:2 local:0 remote:0
    Sep 23 09:01:08 (none) local0.warn cgminer[960]: Chain 2 set_temperature_offset_value_chain_sensor
    Sep 23 09:01:09 (none) local0.notice cgminer[960]: set_temperature_offset_value_chain_sensor: Chain2 Sensor2 temp offset : 00,
    Sep 23 09:01:09 (none) local0.notice cgminer[960]: chain:2 local:0 remote:0
    Sep 23 09:01:09 (none) local0.warn cgminer[960]: Chain 2 set_temperature_offset_value_chain_sensor
    Sep 23 09:01:10 (none) local0.notice cgminer[960]: set_temperature_offset_value_chain_sensor: Chain2 Sensor3 temp offset : 00,
    Sep 23 09:01:10 (none) local0.notice cgminer[960]: bitmain_dcr_init: fan_eft: 0 fan_pwm : 30
    Sep 23 09:01:10 (none) local0.notice cgminer[960]: frequency = '600 timeout 9786'
    Sep 23 09:01:53 (none) local0.notice cgminer[960]: read_temp_func: can't read all sensor's temperature, close PIC and need reboot!!!
    Sep 23 09:01:55 (none) local0.err cgminer[960]: cgminer time error total_secs = 1632387715.072206 last_total_secs = 1.000000
    Sep 23 09:01:56 (none) local0.notice cgminer[960]: initiate_stratum, pool->n2size 8
    Sep 23 09:01:56 (none) local0.notice cgminer[960]: initiate_stratum, pool->n2size 8
    Sep 23 09:01:56 (none) local0.notice cgminer[960]: initiate_stratum, pool->n2size 8
    Sep 23 09:01:56 (none) local0.notice cgminer[960]: pool diff: 46, sdiff: 16384.0000
    Sep 23 09:01:56 (none) local0.notice cgminer[960]: pool diff: 46, sdiff: 16384.0000
    Sep 23 09:01:56 (none) local0.warn cgminer[960]: Pool 0 stratum+tcp://dcr.ss.poolin.com:1883 alive, testing stability
    Sep 23 09:01:56 (none) local0.warn cgminer[960]: Switching to pool 0 stratum+tcp://dcr.ss.poolin.com:1883
    Sep 23 09:01:56 (none) local0.notice cgminer[960]: pool diff: 46, sdiff: 16384.0000
    Sep 23 09:02:02 (none) local0.warn cgminer[960]: API running in IP access mode on port 4028 (9)
    Sep 23 09:02:03 (none) local0.notice cgminer[960]: read_temp_func: can't read all sensor's temperature, close PIC and need reboot!!!
    Sep 23 09:02:14 (none) local0.notice cgminer[960]: read_temp_func: can't read all sensor's temperature, close PIC and need reboot!!!

    0
    Comment actions Permalink

    Hello, please try to troubleshoot the problem by changing another PSU and sd card flashing.

    0
    Comment actions Permalink

Please sign in to leave a comment.