proplem antimainer s9 anthet one

Answered

Comments

2 comments

  • Official comment

    Dear

    It showed ASIC RT error.could you please try the instructions as below :

    1 Clean the dust for the antminer:

    How To Clean and Dust The Antminers https://support.bitmain.com/hc/en-us/articles/115004520173-How-To-Clean-and-Dust-The-Antminers

    2 Upgrade to the latest firmware to try,

    3 Change a PSU

    4. Flash the SD card program to recover the control board.

    Please download the SD card file in the below link

    https://service.bitmain.com/support/download?product=Flashing%20SD%20card%20with%20image

    Instructions:

    https://support.bitmain.com/hc/en-us/articles/360019493654-S9-series-S9-S9i-S9j-S9-Hydro-Control-Board-Program-Recovery

     

    Comment actions Permalink

    [ 0.000000] Booting Linux on physical CPU 0x0
    [ 0.000000] Linux version 3.14.0-xilinx-gb190cb0-dirty (lzq@armdev2) (gcc version 4.8.3 20140320 (prerelease) (Sourcery CodeBench Lite 2014.05-23) ) #57 SMP PREEMPT Fri Dec 9 14:49:22 CST 2016
    [ 0.000000] CPU: ARMv7 Processor [413fc090] revision 0 (ARMv7), cr=18c5387d
    [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
    [ 0.000000] Machine model: Xilinx Zynq
    [ 0.000000] cma: CMA: reserved 128 MiB at 16800000
    [ 0.000000] Memory policy: Data cache writealloc
    [ 0.000000] On node 0 totalpages: 126976
    [ 0.000000] free_area_init_node: node 0, pgdat c0740a40, node_mem_map debd8000
    [ 0.000000] Normal zone: 992 pages used for memmap
    [ 0.000000] Normal zone: 0 pages reserved
    [ 0.000000] Normal zone: 126976 pages, LIFO batch:31
    [ 0.000000] PERCPU: Embedded 8 pages/cpu @debc1000 s9088 r8192 d15488 u32768
    [ 0.000000] pcpu-alloc: s9088 r8192 d15488 u32768 alloc=8*4096
    [ 0.000000] pcpu-alloc: [0] 0 [0] 1
    [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 125984
    [ 0.000000] Kernel command line: noinitrd mem=496M console=ttyPS0,115200 root=ubi0:rootfs ubi.mtd=1 rootfstype=ubifs rw rootwait
    [ 0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes)
    [ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
    [ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
    [ 0.000000] Memory: 364356K/507904K available (5032K kernel code, 283K rwdata, 1916K rodata, 204K init, 258K bss, 143548K reserved, 0K highmem)
    [ 0.000000] Virtual kernel memory layout:
    [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
    [ 0.000000] fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
    [ 0.000000] vmalloc : 0xdf800000 - 0xff000000 ( 504 MB)
    [ 0.000000] lowmem : 0xc0000000 - 0xdf000000 ( 496 MB)
    [ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
    [ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB)
    [ 0.000000] .text : 0xc0008000 - 0xc06d1374 (6949 kB)
    [ 0.000000] .init : 0xc06d2000 - 0xc0705380 ( 205 kB)
    [ 0.000000] .data : 0xc0706000 - 0xc074cf78 ( 284 kB)
    [ 0.000000] .bss : 0xc074cf84 - 0xc078d9fc ( 259 kB)
    [ 0.000000] Preemptible hierarchical RCU implementation.
    [ 0.000000] Dump stacks of tasks blocking RCU-preempt GP.
    [ 0.000000] RCU restricting CPUs from NR_CPUS=4 to nr_cpu_ids=2.
    [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2
    [ 0.000000] NR_IRQS:16 nr_irqs:16 16
    [ 0.000000] ps7-slcr mapped to df802000
    [ 0.000000] zynq_clock_init: clkc starts at df802100
    [ 0.000000] Zynq clock init
    [ 0.000014] sched_clock: 64 bits at 333MHz, resolution 3ns, wraps every 3298534883328ns
    [ 0.000291] ps7-ttc #0 at df804000, irq=43
    [ 0.000591] Console: colour dummy device 80x30
    [ 0.000620] Calibrating delay loop... 1325.46 BogoMIPS (lpj=6627328)
    [ 0.040198] pid_max: default: 32768 minimum: 301
    [ 0.040410] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
    [ 0.040429] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
    [ 0.042586] CPU: Testing write buffer coherency: ok
    [ 0.042890] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
    [ 0.042948] Setting up static identity map for 0x4c4af8 - 0x4c4b50
    [ 0.043168] L310 cache controller enabled
    [ 0.043187] l2x0: 8 ways, CACHE_ID 0x410000c8, AUX_CTRL 0x72760000, Cache size: 512 kB
    [ 0.120987] CPU1: Booted secondary processor
    [ 0.210220] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
    [ 0.210351] Brought up 2 CPUs
    [ 0.210370] SMP: Total of 2 processors activated.
    [ 0.210378] CPU: All CPU(s) started in SVC mode.
    [ 0.211031] devtmpfs: initialized
    [ 0.213423] VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 4
    [ 0.214604] regulator-dummy: no parameters
    [ 0.221962] NET: Registered protocol family 16
    [ 0.224141] DMA: preallocated 256 KiB pool for atomic coherent allocations
    [ 0.226395] cpuidle: using governor ladder
    [ 0.226408] cpuidle: using governor menu
    [ 0.233700] syscon f8000000.ps7-slcr: regmap [mem 0xf8000000-0xf8000fff] registered
    [ 0.235202] hw-breakpoint: found 5 (+1 reserved) breakpoint and 1 watchpoint registers.
    [ 0.235216] hw-breakpoint: maximum watchpoint size is 4 bytes.
    [ 0.235323] zynq-ocm f800c000.ps7-ocmc: ZYNQ OCM pool: 256 KiB @ 0xdf880000
    [ 0.256984] bio: create slab <bio-0> at 0
    [ 0.258341] vgaarb: loaded
    [ 0.259047] SCSI subsystem initialized
    [ 0.259898] usbcore: registered new interface driver usbfs
    [ 0.260074] usbcore: registered new interface driver hub
    [ 0.260656] usbcore: registered new device driver usb
    [ 0.262018] media: Linux media interface: v0.10
    [ 0.262182] Linux video capture interface: v2.00
    [ 0.262421] pps_core: LinuxPPS API ver. 1 registered
    [ 0.262432] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
    [ 0.262555] PTP clock support registered
    [ 0.262920] EDAC MC: Ver: 3.0.0
    [ 0.263943] Advanced Linux Sound Architecture Driver Initialized.
    [ 0.266638] DMA-API: preallocated 4096 debug entries
    [ 0.266652] DMA-API: debugging enabled by kernel config
    [ 0.266721] Switched to clocksource arm_global_timer
    [ 0.286133] NET: Registered protocol family 2
    [ 0.286856] TCP established hash table entries: 4096 (order: 2, 16384 bytes)
    [ 0.286914] TCP bind hash table entries: 4096 (order: 3, 32768 bytes)
    [ 0.286998] TCP: Hash tables configured (established 4096 bind 4096)
    [ 0.287047] TCP: reno registered
    [ 0.287064] UDP hash table entries: 256 (order: 1, 8192 bytes)
    [ 0.287099] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
    [ 0.287339] NET: Registered protocol family 1
    [ 0.287626] RPC: Registered named UNIX socket transport module.
    [ 0.287637] RPC: Registered udp transport module.
    [ 0.287645] RPC: Registered tcp transport module.
    [ 0.287653] RPC: Registered tcp NFSv4.1 backchannel transport module.
    [ 0.287666] PCI: CLS 0 bytes, default 64
    [ 0.288083] hw perfevents: enabled with ARMv7 Cortex-A9 PMU driver, 7 counters available
    [ 0.290035] futex hash table entries: 512 (order: 3, 32768 bytes)
    [ 0.292097] jffs2: version 2.2. (NAND) © 2001-2006 Red Hat, Inc.
    [ 0.292281] msgmni has been set to 967
    [ 0.293030] io scheduler noop registered
    [ 0.293043] io scheduler deadline registered
    [ 0.293083] io scheduler cfq registered (default)
    [ 0.302503] dma-pl330 f8003000.ps7-dma: Loaded driver for PL330 DMAC-2364208
    [ 0.302522] dma-pl330 f8003000.ps7-dma: DBUFF-128x8bytes Num_Chans-8 Num_Peri-4 Num_Events-16
    [ 0.423505] e0001000.serial: ttyPS0 at MMIO 0xe0001000 (irq = 82, base_baud = 3124999) is a xuartps
    [ 0.991377] console [ttyPS0] enabled
    [ 0.995634] xdevcfg f8007000.ps7-dev-cfg: ioremap 0xf8007000 to df866000
    [ 1.003260] [drm] Initialized drm 1.1.0 20060810
    [ 1.020197] brd: module loaded
    [ 1.029541] loop: module loaded
    [ 1.038913] e1000e: Intel(R) PRO/1000 Network Driver - 2.3.2-k
    [ 1.044664] e1000e: Copyright(c) 1999 - 2013 Intel Corporation.
    [ 1.052545] libphy: XEMACPS mii bus: probed
    [ 1.057155] ------------- phy_id = 0x3625e62
    [ 1.061885] xemacps e000b000.ps7-ethernet: pdev->id -1, baseaddr 0xe000b000, irq 54
    [ 1.070718] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
    [ 1.077425] ehci-pci: EHCI PCI platform driver
    [ 1.084631] zynq-dr e0002000.ps7-usb: Unable to init USB phy, missing?
    [ 1.091451] usbcore: registered new interface driver usb-storage
    [ 1.098311] mousedev: PS/2 mouse device common for all mice
    [ 1.104398] i2c /dev entries driver
    [ 1.111303] zynq-edac f8006000.ps7-ddrc: ecc not enabled
    [ 1.116808] cpufreq_cpu0: failed to get cpu0 regulator: -19
    [ 1.122675] Xilinx Zynq CpuIdle Driver started
    [ 1.127570] sdhci: Secure Digital Host Controller Interface driver
    [ 1.133668] sdhci: Copyright(c) Pierre Ossman
    [ 1.138079] sdhci-pltfm: SDHCI platform and OF driver helper
    [ 1.144799] mmc0: no vqmmc regulator found
    [ 1.148839] mmc0: no vmmc regulator found
    [ 1.186739] mmc0: SDHCI controller on e0100000.ps7-sdio [e0100000.ps7-sdio] using ADMA
    [ 1.195414] usbcore: registered new interface driver usbhid
    [ 1.200932] usbhid: USB HID core driver
    [ 1.205629] nand: device found, Manufacturer ID: 0x2c, Chip ID: 0xda
    [ 1.211933] nand: Micron MT29F2G08ABAEAWP
    [ 1.215897] nand: 256MiB, SLC, page size: 2048, OOB size: 64
    [ 1.221832] Bad block table found at page 131008, version 0x01
    [ 1.228058] Bad block table found at page 130944, version 0x01
    [ 1.234108] 3 ofpart partitions found on MTD device pl353-nand
    [ 1.239888] Creating 3 MTD partitions on "pl353-nand":
    [ 1.244979] 0x000000000000-0x000002000000 : "BOOT.bin-env-dts-kernel"
    [ 1.253011] 0x000002000000-0x00000b000000 : "angstram-rootfs"
    [ 1.260309] 0x00000b000000-0x000010000000 : "upgrade-rootfs"
    [ 1.269232] TCP: cubic registered
    [ 1.272465] NET: Registered protocol family 17
    [ 1.277170] Registering SWP/SWPB emulation handler
    [ 1.283023] regulator-dummy: disabling
    [ 1.287343] UBI: attaching mtd1 to ubi0
    [ 1.814138] UBI: scanning is finished
    [ 1.825739] UBI: attached mtd1 (name "angstram-rootfs", size 144 MiB) to ubi0
    [ 1.832820] UBI: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes
    [ 1.839582] UBI: min./max. I/O unit sizes: 2048/2048, sub-page size 2048
    [ 1.846246] UBI: VID header offset: 2048 (aligned 2048), data offset: 4096
    [ 1.853124] UBI: good PEBs: 1152, bad PEBs: 0, corrupted PEBs: 0
    [ 1.859105] UBI: user volume: 1, internal volumes: 1, max. volumes count: 128
    [ 1.866212] UBI: max/mean erase counter: 2/0, WL threshold: 4096, image sequence number: 2138264797
    [ 1.875255] UBI: available PEBs: 0, total reserved PEBs: 1152, PEBs reserved for bad PEB handling: 40
    [ 1.884471] UBI: background thread "ubi_bgt0d" started, PID 1080
    [ 1.884476] drivers/rtc/hctosys.c: unable to open rtc device (rtc0)
    [ 1.888374] ALSA device list:
    [ 1.888377] No soundcards found.
    [ 1.904763] UBIFS: background thread "ubifs_bgt0_0" started, PID 1082
    [ 1.933836] UBIFS: recovery needed
    [ 1.992389] UBIFS: recovery completed
    [ 1.996052] UBIFS: mounted UBI device 0, volume 0, name "rootfs"
    [ 2.001994] UBIFS: LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
    [ 2.011100] UBIFS: FS size: 128626688 bytes (122 MiB, 1013 LEBs), journal size 9023488 bytes (8 MiB, 72 LEBs)
    [ 2.020990] UBIFS: reserved for root: 0 bytes (0 KiB)
    [ 2.026018] UBIFS: media format: w4/r0 (latest is w4/r0), UUID 17F5A1A5-D13B-40BF-B801-9899D86E5DF6, small LPT model
    [ 2.037328] VFS: Mounted root (ubifs filesystem) on device 0:11.
    [ 2.044054] devtmpfs: mounted
    [ 2.047216] Freeing unused kernel memory: 204K (c06d2000 - c0705000)
    [ 2.884517] random: dd urandom read with 0 bits of entropy available
    [ 3.316780]
    [ 3.316780] bcm54xx_config_init
    [ 4.376776]
    [ 4.376776] bcm54xx_config_init
    [ 8.377596] xemacps e000b000.ps7-ethernet: Set clk to 24999999 Hz
    [ 8.383688] xemacps e000b000.ps7-ethernet: link up (100/FULL)
    [ 23.717427] In axi fpga driver!
    [ 23.720491] request_mem_region OK!
    [ 23.723881] AXI fpga dev virtual address is 0xdf9fc000
    [ 23.729017] *base_vir_addr = 0xc51e
    [ 23.743539] In fpga mem driver!
    [ 23.746950] request_mem_region OK!
    [ 23.750451] fpga mem virtual address is 0xe2000000
    [ 24.546744]
    [ 24.546744] bcm54xx_config_init
    [ 25.656775]
    [ 25.656775] bcm54xx_config_init
    [ 29.657599] xemacps e000b000.ps7-ethernet: Set clk to 24999999 Hz
    [ 29.663615] xemacps e000b000.ps7-ethernet: link up (100/FULL)
    log_level = 4
    This is XILINX board. Totalram: 507527168
    Detect 512MB control board of XILINX
    mmap axi_fpga_addr = 0xb6fc2000
    axi_fpga_addr data = 0xc51e
    mmap fpga_mem_addr = 0xb5dbb000
    forceFreq=-1 forceFlag=0
    min work minertest[0]:912


    DETECT HW version=0000c51e
    miner ID : 80604c097990481c
    Miner Type = S9
    AsicType = 1387
    real AsicNum = 63
    use critical mode to search freq...
    get PLUG ON=0x00000020
    Find hashboard on Chain[5]
    Check chain[5] PIC fw version=0x03
    read pic freq and badcore num...
    chain[5]: [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255]
    has freq in PIC, will disable freq setting.
    chain[5] has freq in PIC and will jump over...
    Chain[5] has core num in PIC
    Check chain[5] PIC fw version=0x03
    get PIC voltage=57 on chain[5], value=910
    chain[5] temp offset record: 62,0,0,0,0,0,35,28
    chain[5] temp chip I2C addr=0x98
    chain[5] has no middle temp, use special fix mode.
    total_exist_chain_num = 1
    CRC error counter=0
    set command mode to VIL

    --- check asic number
    After Get ASIC NUM CRC error counter=0
    set_baud=0
    The min freq=700
    set real timeout 52, need sleep=379392
    After TEST CRC error counter=0
    search freq for 1 times, completed chain = 1, total chain num = 1
    single_board_frq_tuning enter
    min_rate, des_rate, fix_volt:13800, 14000, 880
    force_freq not set, don't need tuning
    restart Miner chance num=2
    waiting for receive_func to exit!
    waiting for pic heart to exit!
    calling the get rate, writing rate:4000
    bmminer not found= 1829 root 0:00 grep bmminer

    bmminer not found, restart bmminer ...
    bmminer not found=27967 root 0:00 grep bmminer

    bmminer not found, restart bmminer ...
    This is user mode for mining
    Detect 512MB control board of XILINX
    Miner Type = S9
    Miner compile time: Mon Jul 1 11:19:33 CST 2019 type: Antminer S9
    miner ID : 80604c097990481c
    Checking fans...
    get fan[4] speed=6000
    get fan[4] speed=6000
    get fan[5] speed=4320
    get fan[4] speed=6000
    get fan[5] speed=4320
    get fan[4] speed=6000
    get fan[5] speed=4320
    chain[5]: [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255]
    last_freq: 0x00 0x7d 0x00 0x43 0x00 0x43 0x04 0x43 0x03 0x43 0x00 0x43 0x03 0x43 0x03 0x43 0x03 0x43 0x03 0x43 0x03 0x43 0x03 0x43 0x03 0x43 0x03 0x43 0x03 0x43 0x03 0x43 0x03 0x43 0x03 0x43 0x05 0x43 0x0b 0x43 0x23 0x43 0x00 0x43 0x00 0x43 0x00 0x43 0x00 0x43 0x00 0x43 0x00 0x43 0x00 0x43 0x00 0x43 0x00 0x43 0x00 0x43 0x00 0x43 0x00 0x43 0x00 0x43 0x00 0x43 0x00 0x43 0x00 0x43 0x00 0x43 0x00 0x43 0x00 0x43 0x00 0x43 0x00 0x43 0x00 0x43 0x00 0x43 0x00 0x43 0x00 0x43 0x00 0x43 0x00 0x43 0x00 0x43 0x00 0x43 0x00 0x43 0x00 0x43 0x00 0x43 0x00 0x43 0x00 0x43 0x00 0x43 0x00 0x43 0x00 0x43 0x00 0x43 0x00 0x43 0x00 0x43 0x00 0x43 0x00 0x43 0x00 0x43
    Detect: use voltage limit rules on single board!
    Detect: S9_63 use voltage level=3 : 0
    Chain[J6] has backup chain_voltage=910
    scan based on domain
    Check chain[5] PIC fw version=0x03
    chain[6]: [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255]
    last_freq: 0x00 0x7d 0x0b 0x49 0x07 0x49 0x04 0x49 0x09 0x49 0x00 0x49 0x03 0x49 0x03 0x49 0x03 0x49 0x03 0x49 0x03 0x49 0x03 0x49 0x01 0x49 0x01 0x49 0x0f 0x49 0x0f 0x49 0x0f 0x49 0x0f 0x49 0x05 0x49 0x09 0x49 0x23 0x49 0x00 0x49 0x00 0x49 0x00 0x49 0x00 0x49 0x00 0x49 0x00 0x49 0x00 0x49 0x00 0x49 0x00 0x49 0x00 0x49 0x00 0x49 0x00 0x49 0x00 0x49 0x00 0x49 0x00 0x49 0x00 0x49 0x00 0x49 0x00 0x49 0x00 0x49 0x00 0x49 0x00 0x49 0x00 0x49 0x00 0x49 0x00 0x49 0x00 0x49 0x00 0x49 0x00 0x49 0x00 0x49 0x00 0x49 0x00 0x49 0x00 0x49 0x00 0x49 0x00 0x49 0x00 0x49 0x00 0x49 0x00 0x49 0x00 0x49 0x00 0x49 0x00 0x49 0x00 0x49 0x00 0x49 0x00 0x49 0x00 0x49
    Detect: use voltage limit rules on single board!
    Detect: S9_63 use voltage level=1 : 1
    Chain[J7] has backup chain_voltage=890
    No scan based on domain
    Check chain[6] PIC fw version=0x03
    chain[7]: [63:22] [63:5] [63:24] [63:32] [63:50] [63:36] [63:255] [63:255]
    last_freq: 0x00 0x7d 0x0b 0x37 0x0a 0x49 0x02 0x49 0x08 0x38 0x01 0x2c 0x00 0x49 0x00 0x38 0x09 0x49 0x0c 0x49 0x0b 0x39 0x00 0x49 0x05 0x49 0x0b 0x3e 0x06 0x48 0x0b 0x49 0x08 0x3e 0x03 0x49 0x00 0x49 0x00 0x3e 0x00 0x49 0x00 0x3d 0x00 0x43 0x00 0x49 0x00 0x3f 0x00 0x3e 0x00 0x49 0x00 0x2f 0x00 0x44 0x00 0x49 0x00 0x35 0x00 0x42 0x00 0x49 0x00 0x49 0x00 0x44 0x00 0x49 0x00 0x43 0x00 0x48 0x00 0x45 0x00 0x41 0x00 0x2c 0x00 0x49 0x00 0x49 0x00 0x48 0x00 0x32 0x00 0x49 0x00 0x48 0x00 0x49 0x00 0x28 0x00 0x48 0x00 0x47 0x00 0x2f 0x00 0x49 0x00 0x3d 0x00 0x46 0x00 0x49 0x00 0x37 0x00 0x49 0x00 0x36 0x00 0x49 0x00 0x41 0x00 0x49 0x00 0x38 0x00 0x29
    scan based on domain
    Check chain[7] PIC fw version=0x03
    total_exist_chain_num = 3
    Chain[J6] orignal chain_voltage_pic=57 value=910
    Chain[J6] original chain_voltage_value=910 adjusted chain_voltage_value:910, value=910
    Chain[J7] orignal chain_voltage_pic=57 value=910
    Chain[J7] original chain_voltage_value=890 adjusted chain_voltage_value:890, value=910
    Chain[J7] will use backup chain_voltage_pic=890 [91]
    Chain[J7] get working chain_voltage_pic=91
    Chain[J8] orignal chain_voltage_pic=6 value=940
    Chain[J8] original chain_voltage_value=880 adjusted chain_voltage_value:880, value=940
    Chain[J6] has 63 asic
    Chain[J7] has 33 asic
    retry Chain[J7] has 33 asic
    retry Chain[J7] has 33 asic
    retry Chain[J7] has 33 asic
    retry Chain[J7] has 33 asic
    retry Chain[J7] has 33 asic
    retry Chain[J7] has 33 asic
    Chain[J8] has 63 asic
    Chain[J6] has core num in PIC
    Chain[J7] has core num in PIC
    Chain[J7] ASIC[10] has core num=1
    Chain[J7] ASIC[20] has core num=1
    Chain[J7] ASIC[25] has core num=1
    Chain[J7] ASIC[32] has core num=4
    Chain[J7] ASIC[38] has core num=15
    Chain[J7] ASIC[40] has core num=5
    Chain[J7] ASIC[55] has core num=1
    Chain[J7] ASIC[57] has core num=1
    Chain[J7] ASIC[58] has core num=1
    Chain[J7] ASIC[59] has core num=4
    Chain[J8] has no core num in PIC
    miner total rate=13194GH/s ideal_total_hash_rate = 13000GH/s
    read PIC voltage=910 on chain[5]
    Chain:5 chipnum=63
    Chain[J6] voltage added=0.0V
    Chain:5 temp offset=0
    Chain:5 base freq=606
    Asic[ 0]:606 Asic[ 1]:606 Asic[ 2]:606 Asic[ 3]:606 Asic[ 4]:606 Asic[ 5]:606 Asic[ 6]:606 Asic[ 7]:606
    Asic[ 8]:606 Asic[ 9]:606 Asic[10]:606 Asic[11]:606 Asic[12]:606 Asic[13]:606 Asic[14]:606 Asic[15]:606
    Asic[16]:606 Asic[17]:606 Asic[18]:606 Asic[19]:606 Asic[20]:606 Asic[21]:606 Asic[22]:606 Asic[23]:606
    Asic[24]:606 Asic[25]:606 Asic[26]:606 Asic[27]:606 Asic[28]:606 Asic[29]:606 Asic[30]:606 Asic[31]:606
    Asic[32]:606 Asic[33]:606 Asic[34]:606 Asic[35]:606 Asic[36]:606 Asic[37]:606 Asic[38]:606 Asic[39]:606
    Asic[40]:606 Asic[41]:606 Asic[42]:606 Asic[43]:606 Asic[44]:606 Asic[45]:606 Asic[46]:606 Asic[47]:606
    Asic[48]:606 Asic[49]:606 Asic[50]:606 Asic[51]:606 Asic[52]:606 Asic[53]:606 Asic[54]:606 Asic[55]:606
    Asic[56]:606 Asic[57]:606 Asic[58]:606 Asic[59]:606 Asic[60]:606 Asic[61]:606 Asic[62]:606
    Chain:5 max freq=606
    Chain:5 min freq=606

    read PIC voltage=910 on chain[6]
    Chain:6 chipnum=33
    Chain[J7] voltage added=0.0V
    Chain:6 temp offset=-73
    Chain:6 base freq=643
    Asic[ 0]:643 Asic[ 1]:643 Asic[ 2]:643 Asic[ 3]:643 Asic[ 4]:643 Asic[ 5]:643 Asic[ 6]:643 Asic[ 7]:643
    Asic[ 8]:643 Asic[ 9]:643 Asic[10]:643 Asic[11]:643 Asic[12]:643 Asic[13]:643 Asic[14]:643 Asic[15]:643
    Asic[16]:643 Asic[17]:643 Asic[18]:643 Asic[19]:643 Asic[20]:643 Asic[21]:643 Asic[22]:643 Asic[23]:643
    Asic[24]:643 Asic[25]:643 Asic[26]:643 Asic[27]:643 Asic[28]:643 Asic[29]:643 Asic[30]:643 Asic[31]:643
    Asic[32]:643
    Chain:6 max freq=643
    Chain:6 min freq=643

    read PIC voltage=910 on chain[7]
    Chain:7 chipnum=63
    Chain[J8] voltage added=0.1V
    Chain:7 temp offset=-70
    Chain:7 base freq=487
    Asic[ 0]:533 Asic[ 1]:643 Asic[ 2]:643 Asic[ 3]:537 Asic[ 4]:500 Asic[ 5]:643 Asic[ 6]:537 Asic[ 7]:643
    Asic[ 8]:643 Asic[ 9]:543 Asic[10]:643 Asic[11]:643 Asic[12]:575 Asic[13]:637 Asic[14]:643 Asic[15]:575
    Asic[16]:643 Asic[17]:643 Asic[18]:575 Asic[19]:643 Asic[20]:568 Asic[21]:606 Asic[22]:643 Asic[23]:581
    Asic[24]:575 Asic[25]:643 Asic[26]:508 Asic[27]:612 Asic[28]:643 Asic[29]:529 Asic[30]:600 Asic[31]:643
    Asic[32]:643 Asic[33]:612 Asic[34]:643 Asic[35]:606 Asic[36]:637 Asic[37]:618 Asic[38]:593 Asic[39]:500
    Asic[40]:643 Asic[41]:643 Asic[42]:637 Asic[43]:518 Asic[44]:643 Asic[45]:637 Asic[46]:643 Asic[47]:487
    Asic[48]:637 Asic[49]:631 Asic[50]:508 Asic[51]:643 Asic[52]:568 Asic[53]:625 Asic[54]:643 Asic[55]:533
    Asic[56]:643 Asic[57]:531 Asic[58]:643 Asic[59]:593 Asic[60]:643 Asic[61]:537 Asic[62]:491
    Chain:7 max freq=643
    Chain:7 min freq=487


    Miner fix freq ...
    totalRate = 13194, fixed_totalRate = 13130
    read PIC voltage=910 on chain[5]
    Chain:5 chipnum=63
    Chain[J6] voltage added=0.0V
    Chain:5 temp offset=0
    Chain:5 base freq=606
    Asic[ 0]:606 Asic[ 1]:606 Asic[ 2]:606 Asic[ 3]:606 Asic[ 4]:606 Asic[ 5]:606 Asic[ 6]:606 Asic[ 7]:606
    Asic[ 8]:606 Asic[ 9]:606 Asic[10]:606 Asic[11]:606 Asic[12]:606 Asic[13]:606 Asic[14]:606 Asic[15]:606
    Asic[16]:606 Asic[17]:606 Asic[18]:606 Asic[19]:606 Asic[20]:606 Asic[21]:606 Asic[22]:606 Asic[23]:606
    Asic[24]:606 Asic[25]:606 Asic[26]:606 Asic[27]:606 Asic[28]:606 Asic[29]:606 Asic[30]:606 Asic[31]:606
    Asic[32]:606 Asic[33]:606 Asic[34]:606 Asic[35]:606 Asic[36]:606 Asic[37]:606 Asic[38]:606 Asic[39]:606
    Asic[40]:606 Asic[41]:606 Asic[42]:606 Asic[43]:606 Asic[44]:606 Asic[45]:606 Asic[46]:606 Asic[47]:606
    Asic[48]:606 Asic[49]:606 Asic[50]:606 Asic[51]:606 Asic[52]:606 Asic[53]:606 Asic[54]:606 Asic[55]:606
    Asic[56]:606 Asic[57]:606 Asic[58]:606 Asic[59]:606 Asic[60]:606 Asic[61]:606 Asic[62]:606
    Chain:5 max freq=606
    Chain:5 min freq=606

    read PIC voltage=910 on chain[6]
    Chain:6 chipnum=33
    Chain[J7] voltage added=0.0V
    Chain:6 temp offset=-73
    Chain:6 base freq=643
    Asic[ 0]:643 Asic[ 1]:643 Asic[ 2]:643 Asic[ 3]:643 Asic[ 4]:643 Asic[ 5]:643 Asic[ 6]:643 Asic[ 7]:643
    Asic[ 8]:643 Asic[ 9]:643 Asic[10]:643 Asic[11]:643 Asic[12]:643 Asic[13]:643 Asic[14]:643 Asic[15]:643
    Asic[16]:643 Asic[17]:643 Asic[18]:643 Asic[19]:643 Asic[20]:643 Asic[21]:643 Asic[22]:643 Asic[23]:643
    Asic[24]:643 Asic[25]:643 Asic[26]:643 Asic[27]:643 Asic[28]:643 Asic[29]:643 Asic[30]:643 Asic[31]:643
    Asic[32]:643
    Chain:6 max freq=643
    Chain:6 min freq=643

    read PIC voltage=910 on chain[7]
    Chain:7 chipnum=63
    Chain[J8] voltage added=0.1V
    Chain:7 temp offset=-70
    Chain:7 base freq=487
    Asic[ 0]:533 Asic[ 1]:643 Asic[ 2]:643 Asic[ 3]:537 Asic[ 4]:500 Asic[ 5]:643 Asic[ 6]:537 Asic[ 7]:643
    Asic[ 8]:643 Asic[ 9]:543 Asic[10]:643 Asic[11]:643 Asic[12]:575 Asic[13]:637 Asic[14]:643 Asic[15]:575
    Asic[16]:643 Asic[17]:643 Asic[18]:575 Asic[19]:643 Asic[20]:568 Asic[21]:606 Asic[22]:643 Asic[23]:581
    Asic[24]:575 Asic[25]:643 Asic[26]:508 Asic[27]:612 Asic[28]:643 Asic[29]:529 Asic[30]:600 Asic[31]:643
    Asic[32]:643 Asic[33]:612 Asic[34]:643 Asic[35]:606 Asic[36]:637 Asic[37]:618 Asic[38]:593 Asic[39]:500
    Asic[40]:643 Asic[41]:643 Asic[42]:637 Asic[43]:518 Asic[44]:643 Asic[45]:637 Asic[46]:643 Asic[47]:487
    Asic[48]:637 Asic[49]:631 Asic[50]:508 Asic[51]:643 Asic[52]:568 Asic[53]:625 Asic[54]:643 Asic[55]:533
    Asic[56]:643 Asic[57]:531 Asic[58]:643 Asic[59]:593 Asic[60]:643 Asic[61]:537 Asic[62]:491
    Chain:7 max freq=643
    Chain:7 min freq=487

    max freq = 643
    totalRate = 13194, fixed_totalRate = 13000
    set baud=1
    Chain[J6] PIC temp offset: 62,0,0,0,0,0,35,28,0,0,0,0,0,0,0,0,0,0,
    chain[6] temp chip I2C addr=0x98
    chain[6] has no middle temp, use special fix mode.
    Chain[J6] chip[244] use PIC middle temp offset=0 typeID=55
    New offset Chain[6] chip[244] local:39 remote:41 offset:29
    Chain[J6] chip[244] get middle temp offset=29 typeID=55
    Chain[J8] PIC temp offset: 62,-4,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,
    chain[8] temp chip I2C addr=0x98
    chain[8] has no middle temp, use special fix mode.
    Chain[J8] chip[244] use PIC middle temp offset=-4 typeID=55
    New offset Chain[8] chip[244] local:35 remote:39 offset:27
    Chain[J8] chip[244] get middle temp offset=27 typeID=55
    open core three times
    open core three times
    open core three times
    setting to working voltage...
    chain[6] set voltage to 900
    chain[6] set voltage to 890
    start thread for read temp
    setStartTimePoint total_tv_start_sys=366 total_tv_end_sys=367
    restartNum = 2 , auto-reinit enabled...
    bring_up_pcb_temp = 54
    do read_temp_func once...

    get RT hashrate from Chain[5]: (asic index start from 1-63)
    Asic[01]=0.00000 Asic[02]=0.00000 Asic[03]=0.00000 Asic[04]=0.00000 Asic[05]=0.00000 Asic[06]=0.00000 Asic[07]=0.00000 Asic[08]=0.00000
    Asic[09]=0.00000 Asic[10]=0.00000 Asic[11]=0.00000 Asic[12]=0.00000 Asic[13]=0.00000 Asic[14]=0.00000 Asic[15]=0.00000 Asic[16]=0.00000
    Asic[17]=0.00000 Asic[18]=0.00000 Asic[19]=0.00000 Asic[20]=0.00000 Asic[21]=0.00000 Asic[22]=0.00000 Asic[23]=0.00000 Asic[24]=0.00000
    Asic[25]=0.00000 Asic[26]=0.00000 Asic[27]=0.00000 Asic[28]=0.00000 Asic[29]=0.00000 Asic[30]=0.00000 Asic[31]=0.00000 Asic[32]=0.00000
    Asic[33]=0.00000 Asic[34]=0.00000 Asic[35]=0.00000 Asic[36]=0.00000 Asic[37]=0.00000 Asic[38]=0.00000 Asic[39]=0.00000 Asic[40]=0.00000
    Asic[41]=0.00000 Asic[42]=0.00000 Asic[43]=0.00000 Asic[44]=0.00000 Asic[45]=0.00000 Asic[46]=0.00000 Asic[47]=0.00000 Asic[48]=0.00000
    Asic[49]=0.00000 Asic[50]=0.00000 Asic[51]=0.00000 Asic[52]=0.00000 Asic[53]=0.00000 Asic[54]=0.00000 Asic[55]=0.00000 Asic[56]=0.00000
    Asic[57]=125.627 Asic[58]=0.00000 Asic[59]=10011.3 Asic[60]=0.00000 Asic[61]=0.00000 Asic[62]=0.00000 Asic[63]=0.00000

    get RT hashrate from Chain[6]: (asic index start from 1-63)
    Asic[01]=0.00000 Asic[02]=0.00000 Asic[03]=0.00000 Asic[04]=0.00000 Asic[05]=0.00000 Asic[06]=0.00000 Asic[07]=0.00000 Asic[08]=0.00000
    Asic[09]=0.00000 Asic[10]=0.00000 Asic[11]=0.00000 Asic[12]=0.00000 Asic[13]=0.00000 Asic[14]=0.00000 Asic[15]=18.6890 Asic[16]=0.00000
    Asic[17]=0.00000 Asic[18]=0.00000 Asic[19]=0.00000 Asic[20]=0.00000 Asic[21]=0.00000 Asic[22]=0.00000 Asic[23]=0.00000 Asic[24]=0.00000
    Asic[25]=0.00000 Asic[26]=0.00000 Asic[27]=0.00000 Asic[28]=0.00000 Asic[29]=74.8760 Asic[30]=0.00000 Asic[31]=0.00000 Asic[32]=0.00000
    Asic[33]=0.00000
    get RT hashrate from Chain[7]: (asic index start from 1-63)
    Asic[01]=0.00000 Asic[02]=0.00000 Asic[03]=0.00000 Asic[04]=0.00000 Asic[05]=0.00000 Asic[06]=0.00000 Asic[07]=0.00000 Asic[08]=0.00000
    Asic[09]=0.00000 Asic[10]=0.00000 Asic[11]=0.00000 Asic[12]=0.00000 Asic[13]=0.00000 Asic[14]=0.00000 Asic[15]=0.00000 Asic[16]=0.00000
    Asic[17]=0.00000 Asic[18]=0.00000 Asic[19]=0.00000 Asic[20]=0.00000 Asic[21]=0.00000 Asic[22]=0.00000 Asic[23]=0.00000 Asic[24]=0.00000
    Asic[25]=0.00000 Asic[26]=0.00000 Asic[27]=0.00000 Asic[28]=0.00000 Asic[29]=222.465 Asic[30]=0.00000 Asic[31]=0.00000 Asic[32]=0.00000
    Asic[33]=0.00000 Asic[34]=0.00000 Asic[35]=0.00000 Asic[36]=0.00000 Asic[37]=0.00000 Asic[38]=0.00000 Asic[39]=0.00000 Asic[40]=0.00000
    Asic[41]=0.00000 Asic[42]=0.00000 Asic[43]=0.00000 Asic[44]=0.00000 Asic[45]=0.00000 Asic[46]=0.00000 Asic[47]=0.00000 Asic[48]=0.00000
    Asic[49]=0.00000 Asic[50]=0.00000 Asic[51]=0.00000 Asic[52]=0.00000 Asic[53]=0.00000 Asic[54]=0.00000 Asic[55]=0.00000 Asic[56]=0.00000
    Asic[57]=210.436 Asic[58]=0.00000 Asic[59]=7698.09 Asic[60]=0.00000 Asic[61]=0.00000 Asic[62]=0.00000 Asic[63]=0.00000
    Check Chain[J6] ASIC RT error: (asic index start from 1-63)
    Asic[57]=125.627000
    Asic[59]=10011.300000
    Check Chain[J7] ASIC RT error: (asic index start from 1-63)
    Check Chain[J8] ASIC RT error: (asic index start from 1-63)
    Asic[29]=222.465000
    Asic[57]=210.436000
    Asic[59]=7698.090000
    Done check_asic_reg
    Chain[5] Chip[244] pcb temperature=54
    Chain[5] Chip[62] junction temperature=64
    Special fix Chain[5] Chip[62] middle Temp = 69
    Done read temp on Chain[5]
    Done read temp on Chain[6]
    Chain[7] Chip[244] pcb temperature=47
    Chain[7] Chip[62] junction temperature=64
    Special fix Chain[7] Chip[62] middle Temp = 62
    Done read temp on Chain[7]
    Max pcb temp : 54
    set FAN speed according to: temp_highest=54 temp_top1[PWM_T]=54 temp_top1[TEMP_POS_LOCAL]=54 temp_change=54 fix_fan_steps=0
    set normal FAN speed...
    pwm_percent = 58
    FAN PWM: 58
    read_temp_func Done!
    CRC error counter=354

    0
    Comment actions Permalink

Please sign in to leave a comment.