Antminer S9 Miner Staus is all zero

miner status is showing everything zero. I have tried by reset and update firmware.

Red (fault) and Green (Normal) lights are still off and if i press the ip report button they are both turned on.

All hashing board red lights are off. Please tell me the solution.

See Kernel Log 

[ 0.000000] Booting Linux on physical CPU 0x0
[ 0.000000] Linux version 3.14.0-xilinx-ga36f3af-dirty (lzq@ubuntu) (gcc version 4.8.3 20140320 (prerelease) (Sourcery CodeBench Lite 2014.05-23) ) #90 SMP PREEMPT Thu Jun 20 15:01:47 CST 2019
[ 0.000000] CPU: ARMv7 Processor [413fc090] revision 0 (ARMv7), cr=18c5387d
[ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
[ 0.000000] Machine model: Xilinx Zynq
[ 0.000000] cma: CMA: reserved 128 MiB at 27800000
[ 0.000000] Memory policy: Data cache writealloc
[ 0.000000] On node 0 totalpages: 258048
[ 0.000000] free_area_init_node: node 0, pgdat c075a640, node_mem_map e6fd8000
[ 0.000000] Normal zone: 1520 pages used for memmap
[ 0.000000] Normal zone: 0 pages reserved
[ 0.000000] Normal zone: 194560 pages, LIFO batch:31
[ 0.000000] HighMem zone: 496 pages used for memmap
[ 0.000000] HighMem zone: 63488 pages, LIFO batch:15
[ 0.000000] PERCPU: Embedded 8 pages/cpu @e6fc0000 s9344 r8192 d15232 u32768
[ 0.000000] pcpu-alloc: s9344 r8192 d15232 u32768 alloc=8*4096
[ 0.000000] pcpu-alloc: [0] 0 [0] 1
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 256528
[ 0.000000] Kernel command line: noinitrd mem=1008M console=ttyPS0,115200 root=ubi0:rootfs ubi.mtd=1 rootfstype=ubifs rw rootwait
[ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] Memory: 884044K/1032192K available (5094K kernel code, 292K rwdata, 1948K rodata, 209K init, 259K bss, 148148K reserved, 253952K highmem)
[ 0.000000] Virtual kernel memory layout:
[ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
[ 0.000000] fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
[ 0.000000] vmalloc : 0xf0000000 - 0xff000000 ( 240 MB)
[ 0.000000] lowmem : 0xc0000000 - 0xef800000 ( 760 MB)
[ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
[ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB)
[ 0.000000] .text : 0xc0008000 - 0xc06e8cf4 (7044 kB)
[ 0.000000] .init : 0xc06e9000 - 0xc071d480 ( 210 kB)
[ 0.000000] .data : 0xc071e000 - 0xc0767058 ( 293 kB)
[ 0.000000] .bss : 0xc0767064 - 0xc07a7d64 ( 260 kB)
[ 0.000000] Preemptible hierarchical RCU implementation.
[ 0.000000] Dump stacks of tasks blocking RCU-preempt GP.
[ 0.000000] RCU restricting CPUs from NR_CPUS=4 to nr_cpu_ids=2.
[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2
[ 0.000000] NR_IRQS:16 nr_irqs:16 16
[ 0.000000] ps7-slcr mapped to f0004000
[ 0.000000] zynq_clock_init: clkc starts at f0004100
[ 0.000000] Zynq clock init
[ 0.000014] sched_clock: 64 bits at 333MHz, resolution 3ns, wraps every 3298534883328ns
[ 0.000292] ps7-ttc #0 at f0006000, irq=43
[ 0.000594] Console: colour dummy device 80x30
[ 0.000629] Calibrating delay loop... 1325.46 BogoMIPS (lpj=6627328)
[ 0.040198] pid_max: default: 32768 minimum: 301
[ 0.040406] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.040428] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.042603] CPU: Testing write buffer coherency: ok
[ 0.042926] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
[ 0.042982] Setting up static identity map for 0x4d3ec0 - 0x4d3f18
[ 0.043202] L310 cache controller enabled
[ 0.043221] l2x0: 8 ways, CACHE_ID 0x410000c8, AUX_CTRL 0x72760000, Cache size: 512 kB
[ 0.120988] CPU1: Booted secondary processor
[ 0.210218] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
[ 0.210349] Brought up 2 CPUs
[ 0.210368] SMP: Total of 2 processors activated.
[ 0.210377] CPU: All CPU(s) started in SVC mode.
[ 0.211053] devtmpfs: initialized
[ 0.213499] VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 4
[ 0.214688] regulator-dummy: no parameters
[ 0.222081] NET: Registered protocol family 16
[ 0.224309] DMA: preallocated 256 KiB pool for atomic coherent allocations
[ 0.226573] cpuidle: using governor ladder
[ 0.226587] cpuidle: using governor menu
[ 0.233969] syscon f8000000.ps7-slcr: regmap [mem 0xf8000000-0xf8000fff] registered
[ 0.235485] hw-breakpoint: found 5 (+1 reserved) breakpoint and 1 watchpoint registers.
[ 0.235499] hw-breakpoint: maximum watchpoint size is 4 bytes.
[ 0.235606] zynq-ocm f800c000.ps7-ocmc: ZYNQ OCM pool: 256 KiB @ 0xf0080000
[ 0.258004] bio: create slab <bio-0> at 0
[ 0.259400] vgaarb: loaded
[ 0.260090] SCSI subsystem initialized
[ 0.261189] usbcore: registered new interface driver usbfs
[ 0.261360] usbcore: registered new interface driver hub
[ 0.261586] usbcore: registered new device driver usb
[ 0.262112] media: Linux media interface: v0.10
[ 0.262268] Linux video capture interface: v2.00
[ 0.262504] pps_core: LinuxPPS API ver. 1 registered
[ 0.262517] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[ 0.262645] PTP clock support registered
[ 0.262994] EDAC MC: Ver: 3.0.0
[ 0.264049] Advanced Linux Sound Architecture Driver Initialized.
[ 0.266785] DMA-API: preallocated 4096 debug entries
[ 0.266798] DMA-API: debugging enabled by kernel config
[ 0.266867] Switched to clocksource arm_global_timer
[ 0.286710] NET: Registered protocol family 2
[ 0.287703] TCP established hash table entries: 8192 (order: 3, 32768 bytes)
[ 0.287799] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
[ 0.287958] TCP: Hash tables configured (established 8192 bind 8192)
[ 0.288018] TCP: reno registered
[ 0.288038] UDP hash table entries: 512 (order: 2, 16384 bytes)
[ 0.288087] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[ 0.288346] NET: Registered protocol family 1
[ 0.288694] RPC: Registered named UNIX socket transport module.
[ 0.288706] RPC: Registered udp transport module.
[ 0.288714] RPC: Registered tcp transport module.
[ 0.288722] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 0.288735] PCI: CLS 0 bytes, default 64
[ 0.289160] hw perfevents: enabled with ARMv7 Cortex-A9 PMU driver, 7 counters available
[ 0.291161] futex hash table entries: 512 (order: 3, 32768 bytes)
[ 0.292513] bounce pool size: 64 pages
[ 0.293385] jffs2: version 2.2. (NAND) © 2001-2006 Red Hat, Inc.
[ 0.293584] msgmni has been set to 1486
[ 0.294353] io scheduler noop registered
[ 0.294365] io scheduler deadline registered
[ 0.294407] io scheduler cfq registered (default)
[ 0.305224] dma-pl330 f8003000.ps7-dma: Loaded driver for PL330 DMAC-2364208
[ 0.305244] dma-pl330 f8003000.ps7-dma: DBUFF-128x8bytes Num_Chans-8 Num_Peri-4 Num_Events-16
[ 0.428282] e0001000.serial: ttyPS0 at MMIO 0xe0001000 (irq = 82, base_baud = 3124999) is a xuartps
[ 1.000736] console [ttyPS0] enabled
[ 1.004986] xdevcfg f8007000.ps7-dev-cfg: ioremap 0xf8007000 to f0068000
[ 1.012611] [drm] Initialized drm 1.1.0 20060810
[ 1.029698] brd: module loaded
[ 1.039053] loop: module loaded
[ 1.048657] e1000e: Intel(R) PRO/1000 Network Driver - 2.3.2-k
[ 1.054405] e1000e: Copyright(c) 1999 - 2013 Intel Corporation.
[ 1.062378] libphy: XEMACPS mii bus: probed
[ 1.066749] ------------- phy_id = 0x3625e62
[ 1.071778] xemacps e000b000.ps7-ethernet: pdev->id -1, baseaddr 0xe000b000, irq 54
[ 1.080393] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.087036] ehci-pci: EHCI PCI platform driver
[ 1.094236] zynq-dr e0002000.ps7-usb: Unable to init USB phy, missing?
[ 1.101061] usbcore: registered new interface driver usb-storage
[ 1.107927] mousedev: PS/2 mouse device common for all mice
[ 1.114023] i2c /dev entries driver
[ 1.120991] zynq-edac f8006000.ps7-ddrc: ecc not enabled
[ 1.126466] cpufreq_cpu0: failed to get cpu0 regulator: -19
[ 1.132366] Xilinx Zynq CpuIdle Driver started
[ 1.137272] sdhci: Secure Digital Host Controller Interface driver
[ 1.143366] sdhci: Copyright(c) Pierre Ossman
[ 1.147780] sdhci-pltfm: SDHCI platform and OF driver helper
[ 1.154516] mmc0: no vqmmc regulator found
[ 1.158551] mmc0: no vmmc regulator found
[ 1.196889] mmc0: SDHCI controller on e0100000.ps7-sdio [e0100000.ps7-sdio] using ADMA
[ 1.205559] usbcore: registered new interface driver usbhid
[ 1.211063] usbhid: USB HID core driver
[ 1.215764] nand: device found, Manufacturer ID: 0x2c, Chip ID: 0xda
[ 1.222061] nand: Micron MT29F2G08ABAEAWP
[ 1.226029] nand: 256MiB, SLC, page size: 2048, OOB size: 64
[ 1.231969] Bad block table found at page 131008, version 0x01
[ 1.238197] Bad block table found at page 130944, version 0x01
[ 1.244248] 3 ofpart partitions found on MTD device pl353-nand
[ 1.250025] Creating 3 MTD partitions on "pl353-nand":
[ 1.255125] 0x000000000000-0x000002000000 : "BOOT.bin-env-dts-kernel"
[ 1.263163] 0x000002000000-0x00000b000000 : "angstram-rootfs"
[ 1.270480] 0x00000b000000-0x000010000000 : "upgrade-rootfs"
[ 1.279185] nf_conntrack version 0.5.0 (15861 buckets, 63444 max)
[ 1.285848] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 1.291168] TCP: cubic registered
[ 1.294402] NET: Registered protocol family 17
[ 1.299142] Registering SWP/SWPB emulation handler
[ 1.305033] regulator-dummy: disabling
[ 1.309398] UBI: attaching mtd1 to ubi0
[ 1.837967] UBI: scanning is finished
[ 1.849618] UBI: attached mtd1 (name "angstram-rootfs", size 144 MiB) to ubi0
[ 1.856674] UBI: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes
[ 1.863469] UBI: min./max. I/O unit sizes: 2048/2048, sub-page size 2048
[ 1.870147] UBI: VID header offset: 2048 (aligned 2048), data offset: 4096
[ 1.877005] UBI: good PEBs: 1152, bad PEBs: 0, corrupted PEBs: 0
[ 1.882974] UBI: user volume: 1, internal volumes: 1, max. volumes count: 128
[ 1.890105] UBI: max/mean erase counter: 2/0, WL threshold: 4096, image sequence number: 768485946
[ 1.899049] UBI: available PEBs: 0, total reserved PEBs: 1152, PEBs reserved for bad PEB handling: 40
[ 1.908265] UBI: background thread "ubi_bgt0d" started, PID 1085
[ 1.908270] drivers/rtc/hctosys.c: unable to open rtc device (rtc0)
[ 1.912213] ALSA device list:
[ 1.912216] No soundcards found.
[ 1.928548] UBIFS: background thread "ubifs_bgt0_0" started, PID 1087
[ 1.981235] UBIFS: mounted UBI device 0, volume 0, name "rootfs"
[ 1.987192] UBIFS: LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
[ 1.996273] UBIFS: FS size: 128626688 bytes (122 MiB, 1013 LEBs), journal size 9023488 bytes (8 MiB, 72 LEBs)
[ 2.006179] UBIFS: reserved for root: 0 bytes (0 KiB)
[ 2.011223] UBIFS: media format: w4/r0 (latest is w4/r0), UUID E215D0B0-FA6F-4ECF-A946-F9E82D00BE06, small LPT model
[ 2.022517] VFS: Mounted root (ubifs filesystem) on device 0:11.
[ 2.029712] devtmpfs: mounted
[ 2.032820] Freeing unused kernel memory: 208K (c06e9000 - c071d000)
[ 2.874817] random: dd urandom read with 0 bits of entropy available
[ 3.296883]
[ 3.296883] bcm54xx_config_init
[ 4.376887]
[ 4.376887] bcm54xx_config_init
[ 8.377748] xemacps e000b000.ps7-ethernet: Set clk to 24999999 Hz
[ 8.383835] xemacps e000b000.ps7-ethernet: link up (100/FULL)
[ 24.937080] In axi fpga driver!
[ 24.940151] request_mem_region OK!
[ 24.943543] AXI fpga dev virtual address is 0xf01fe000
[ 24.948687] *base_vir_addr = 0xc51e
[ 24.964234] In fpga mem driver!
[ 24.967358] request_mem_region OK!
[ 24.970869] fpga mem virtual address is 0xf3000000
[ 25.766900]
[ 25.766900] bcm54xx_config_init
[ 26.846911]
[ 26.846911] bcm54xx_config_init
[ 30.847750] xemacps e000b000.ps7-ethernet: Set clk to 24999999 Hz
[ 30.853769] xemacps e000b000.ps7-ethernet: link up (100/FULL)
main.c:13992: log_level = 4
main.c:14019: This is XILINX board. Totalram: 1039691776
main.c:14025: Detect 1GB control board of XILINX
driver-bitmain.c:1776: mmap axi_fpga_addr = 0xb6fd9000
driver-bitmain.c:1781: axi_fpga_addr data = 0xc51e
driver-bitmain.c:1797: mmap fpga_mem_addr = 0xb5dd2000
driver-bitmain.c:994: forceFreq=-1 forceFlag=0
driver-bitmain.c:1696: min work minertest[0]:912

main.c:8570: DETECT HW version=0000c51e
main.c:14064: miner ID : 815cad2e2c008854
main.c:14089: Miner Type = S9
main.c:14101: AsicType = 1387
main.c:14104: real AsicNum = 63
main.c:14197: use critical mode to search freq...
driver-bitmain.c:1876: get PLUG ON=0x000000e0
driver-bitmain.c:1946: Find hashboard on Chain[5]
driver-bitmain.c:1946: Find hashboard on Chain[6]
driver-bitmain.c:1946: Find hashboard on Chain[7]
main.c:2282: Check chain[5] PIC fw version=0x03
main.c:2282: Check chain[6] PIC fw version=0x03
main.c:2282: Check chain[7] PIC fw version=0x03
main.c:8940: read pic freq and badcore num...
main.c:8961: chain[5]: [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255]
main.c:9003: has freq in PIC, will disable freq setting.
main.c:9099: chain[5] has freq in PIC and will jump over...
main.c:9103: Chain[5] has core num in PIC
main.c:2282: Check chain[5] PIC fw version=0x03
main.c:8940: read pic freq and badcore num...
main.c:8961: chain[6]: [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255]
main.c:9003: has freq in PIC, will disable freq setting.
main.c:9099: chain[6] has freq in PIC and will jump over...
main.c:9103: Chain[6] has core num in PIC
main.c:9113: Chain[6] ASIC[13] has core num=9
main.c:9113: Chain[6] ASIC[31] has core num=10
main.c:9113: Chain[6] ASIC[35] has core num=15
main.c:9113: Chain[6] ASIC[36] has core num=2
main.c:9113: Chain[6] ASIC[43] has core num=15
main.c:9113: Chain[6] ASIC[47] has core num=10
main.c:2282: Check chain[6] PIC fw version=0x03
main.c:8940: read pic freq and badcore num...
main.c:8961: chain[7]: [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255]
main.c:9003: has freq in PIC, will disable freq setting.
main.c:9099: chain[7] has freq in PIC and will jump over...
main.c:9103: Chain[7] has core num in PIC
main.c:9113: Chain[7] ASIC[0] has core num=1
main.c:9113: Chain[7] ASIC[1] has core num=1
main.c:9113: Chain[7] ASIC[2] has core num=1
main.c:9113: Chain[7] ASIC[4] has core num=1
main.c:9113: Chain[7] ASIC[5] has core num=1
main.c:9113: Chain[7] ASIC[6] has core num=1
main.c:9113: Chain[7] ASIC[7] has core num=1
main.c:9113: Chain[7] ASIC[8] has core num=1
main.c:9113: Chain[7] ASIC[9] has core num=2
main.c:9113: Chain[7] ASIC[10] has core num=1
main.c:9113: Chain[7] ASIC[11] has core num=1
main.c:9113: Chain[7] ASIC[12] has core num=1
main.c:9113: Chain[7] ASIC[13] has core num=1
main.c:9113: Chain[7] ASIC[14] has core num=1
main.c:9113: Chain[7] ASIC[15] has core num=1
main.c:9113: Chain[7] ASIC[16] has core num=1
main.c:9113: Chain[7] ASIC[17] has core num=1
main.c:9113: Chain[7] ASIC[18] has core num=1
main.c:9113: Chain[7] ASIC[19] has core num=1
main.c:9113: Chain[7] ASIC[20] has core num=1
main.c:9113: Chain[7] ASIC[21] has core num=1
main.c:9113: Chain[7] ASIC[22] has core num=1
main.c:9113: Chain[7] ASIC[23] has core num=1
main.c:9113: Chain[7] ASIC[24] has core num=1
main.c:9113: Chain[7] ASIC[25] has core num=2
main.c:9113: Chain[7] ASIC[26] has core num=1
main.c:9113: Chain[7] ASIC[27] has core num=2
main.c:9113: Chain[7] ASIC[28] has core num=1
main.c:9113: Chain[7] ASIC[29] has core num=1
main.c:9113: Chain[7] ASIC[31] has core num=1
main.c:9113: Chain[7] ASIC[32] has core num=2
main.c:9113: Chain[7] ASIC[33] has core num=1
main.c:9113: Chain[7] ASIC[34] has core num=1
main.c:9113: Chain[7] ASIC[35] has core num=1
main.c:9113: Chain[7] ASIC[36] has core num=1
main.c:9113: Chain[7] ASIC[37] has core num=1
main.c:9113: Chain[7] ASIC[38] has core num=1
main.c:9113: Chain[7] ASIC[39] has core num=1
main.c:9113: Chain[7] ASIC[41] has core num=1
main.c:9113: Chain[7] ASIC[42] has core num=2
main.c:9113: Chain[7] ASIC[43] has core num=1
main.c:9113: Chain[7] ASIC[44] has core num=1
main.c:9113: Chain[7] ASIC[45] has core num=1
main.c:9113: Chain[7] ASIC[46] has core num=6
main.c:9113: Chain[7] ASIC[47] has core num=1
main.c:9113: Chain[7] ASIC[48] has core num=1
main.c:9113: Chain[7] ASIC[50] has core num=2
main.c:9113: Chain[7] ASIC[51] has core num=1
main.c:9113: Chain[7] ASIC[52] has core num=1
main.c:9113: Chain[7] ASIC[53] has core num=1
main.c:9113: Chain[7] ASIC[54] has core num=2
main.c:9113: Chain[7] ASIC[55] has core num=1
main.c:9113: Chain[7] ASIC[56] has core num=1
main.c:9113: Chain[7] ASIC[57] has core num=2
main.c:9113: Chain[7] ASIC[58] has core num=1
main.c:9113: Chain[7] ASIC[59] has core num=1
main.c:9113: Chain[7] ASIC[60] has core num=1
main.c:9113: Chain[7] ASIC[61] has core num=1
main.c:2282: Check chain[7] PIC fw version=0x03
main.c:9183: get PIC voltage=91 on chain[5], value=890
main.c:9183: get PIC voltage=125 on chain[6], value=870
main.c:9183: get PIC voltage=125 on chain[7], value=870
main.c:9349: chain[5] temp offset record: 62,-5,0,0,0,0,34,0
main.c:9366: chain[5] temp chip I2C addr=0x98
main.c:9349: chain[6] temp offset record: 62,-5,0,0,0,0,34,0
main.c:9366: chain[6] temp chip I2C addr=0x98
main.c:9349: chain[7] temp offset record: 62,-4,0,0,0,0,34,0
main.c:9366: chain[7] temp chip I2C addr=0x98
main.c:13956: total_exist_chain_num = 3
main.c:9562: CRC error counter=0
main.c:9577: set command mode to VIL
main.c:9649:
--- check asic number
main.c:9745: After Get ASIC NUM CRC error counter=0
main.c:9768: set_baud=0
main.c:10693: The min freq=700
main.c:10695: set real timeout 52, need sleep=379392
main.c:12825: After TEST CRC error counter=0
main.c:14236: search freq for 1 times, completed chain = 3, total chain num = 3
board_frq_tuning.c:628: single_board_frq_tuning enter
board_frq_tuning.c:629: min_rate, des_rate, fix_volt:13800, 14000, 880
board_frq_tuning.c:254: force_freq not set, don't need tuning
main.c:14645: restart Miner chance num=2
main.c:14685: waiting for receive_func to exit!
main.c:14699: waiting for pic heart to exit!
main.c:13927: bmminer not found= 1845 root 0:00 grep bmminer

main.c:14758: bmminer not found, restart bmminer ...
driver-btm-c5.c:12285:bitmain_c5_init: This is user mode for mining
driver-btm-c5.c:12328:bitmain_c5_init: Detect 1GB control board of XILINX
driver-btm-c5.c:12355:bitmain_c5_init: Miner Type = S9
driver-btm-c5.c:12366:bitmain_c5_init: Miner compile time: Tue Jul 30 20:37:39 CST 2019 type: Antminer S9
driver-btm-c5.c:12456:bitmain_c5_init: miner ID : 815cad2e2c008854
driver-btm-c5.c:12613:bitmain_c5_init: Checking fans...
driver-btm-c5.c:2990:check_fan_beforeInit: get fan[4] speed=6000
driver-btm-c5.c:2990:check_fan_beforeInit: get fan[4] speed=6000
driver-btm-c5.c:2990:check_fan_beforeInit: get fan[5] speed=2280
driver-btm-c5.c:2990:check_fan_beforeInit: get fan[4] speed=6000
driver-btm-c5.c:2990:check_fan_beforeInit: get fan[5] speed=2280
driver-btm-c5.c:2990:check_fan_beforeInit: get fan[4] speed=6000
driver-btm-c5.c:2990:check_fan_beforeInit: get fan[5] speed=2280
driver-btm-c5.c:2990:check_fan_beforeInit: get fan[4] speed=6000
driver-btm-c5.c:2990:check_fan_beforeInit: get fan[5] speed=2280
driver-btm-c5.c:2990:check_fan_beforeInit: get fan[4] speed=5880
driver-btm-c5.c:2990:check_fan_beforeInit: get fan[5] speed=2280
driver-btm-c5.c:2990:check_fan_beforeInit: get fan[4] speed=5880
driver-btm-c5.c:2990:check_fan_beforeInit: get fan[5] speed=2280
driver-btm-c5.c:2990:check_fan_beforeInit: get fan[4] speed=5880
driver-btm-c5.c:2990:check_fan_beforeInit: get fan[5] speed=2280
driver-btm-c5.c:2990:check_fan_beforeInit: get fan[4] speed=5880
driver-btm-c5.c:2990:check_fan_beforeInit: get fan[5] speed=2280
driver-btm-c5.c:2990:check_fan_beforeInit: get fan[4] speed=5880
driver-btm-c5.c:2990:check_fan_beforeInit: get fan[5] speed=2280
driver-btm-c5.c:2990:check_fan_beforeInit: get fan[4] speed=5880
driver-btm-c5.c:2990:check_fan_beforeInit: get fan[5] speed=2280
driver-btm-c5.c:2990:check_fan_beforeInit: get fan[4] speed=5880
driver-btm-c5.c:2990:check_fan_beforeInit: get fan[5] speed=2280
driver-btm-c5.c:2990:check_fan_beforeInit: get fan[4] speed=5880
driver-btm-c5.c:2990:check_fan_beforeInit: get fan[5] speed=2280
driver-btm-c5.c:2990:check_fan_beforeInit: get fan[4] speed=5880
driver-btm-c5.c:2990:check_fan_beforeInit: get fan[5] speed=2280
driver-btm-c5.c:2990:check_fan_beforeInit: get fan[4] speed=5880
driver-btm-c5.c:2990:check_fan_beforeInit: get fan[5] speed=2280
driver-btm-c5.c:2990:check_fan_beforeInit: get fan[4] speed=5880
driver-btm-c5.c:3007:check_fan_beforeInit: waiting fans become stable...
driver-btm-c5.c:2990:check_fan_beforeInit: get fan[5] speed=2280
driver-btm-c5.c:2990:check_fan_beforeInit: get fan[4] speed=5880
driver-btm-c5.c:2990:check_fan_beforeInit: get fan[5] speed=2280
driver-btm-c5.c:2990:check_fan_beforeInit: get fan[4] speed=5880
driver-btm-c5.c:2990:check_fan_beforeInit: get fan[5] speed=2280
driver-btm-c5.c:2990:check_fan_beforeInit: get fan[4] speed=5880
driver-btm-c5.c:2990:check_fan_beforeInit: get fan[5] speed=2280
driver-btm-c5.c:2990:check_fan_beforeInit: get fan[4] speed=5880
driver-btm-c5.c:2990:check_fan_beforeInit: get fan[5] speed=2280
driver-btm-c5.c:2990:check_fan_beforeInit: get fan[4] speed=5880
driver-btm-c5.c:2990:check_fan_beforeInit: get fan[5] speed=2280
driver-btm-c5.c:2990:check_fan_beforeInit: get fan[4] speed=5880
driver-btm-c5.c:2990:check_fan_beforeInit: get fan[5] speed=2280
driver-btm-c5.c:2990:check_fan_beforeInit: get fan[4] speed=5880
driver-btm-c5.c:2990:check_fan_beforeInit: get fan[5] speed=2280
driver-btm-c5.c:2990:check_fan_beforeInit: get fan[4] speed=5880
driver-btm-c5.c:2990:check_fan_beforeInit: get fan[5] speed=2280
driver-btm-c5.c:2990:check_fan_beforeInit: get fan[4] speed=5880
driver-btm-c5.c:2990:check_fan_beforeInit: get fan[5] speed=2280
driver-btm-c5.c:2990:check_fan_beforeInit: get fan[4] speed=5880
driver-btm-c5.c:2990:check_fan_beforeInit: get fan[5] speed=2280
driver-btm-c5.c:2990:check_fan_beforeInit: get fan[4] speed=5880
driver-btm-c5.c:2990:check_fan_beforeInit: get fan[5] speed=2280
driver-btm-c5.c:2990:check_fan_beforeInit: get fan[4] speed=5880
driver-btm-c5.c:2990:check_fan_beforeInit: get fan[5] speed=2280
driver-btm-c5.c:2990:check_fan_beforeInit: get fan[4] speed=5880
driver-btm-c5.c:2990:check_fan_beforeInit: get fan[5] speed=2280
driver-btm-c5.c:2990:check_fan_beforeInit: get fan[4] speed=5880
driver-btm-c5.c:2990:check_fan_beforeInit: get fan[5] speed=2280
driver-btm-c5.c:2990:check_fan_beforeInit: get fan[4] speed=5880
driver-btm-c5.c:2990:check_fan_beforeInit: get fan[5] speed=2280
driver-btm-c5.c:2990:check_fan_beforeInit: get fan[4] speed=5880
driver-btm-c5.c:2990:check_fan_beforeInit: get fan[5] speed=2280
driver-btm-c5.c:2990:check_fan_beforeInit: get fan[4] speed=5880
driver-btm-c5.c:2990:check_fan_beforeInit: get fan[5] speed=2280
driver-btm-c5.c:2990:check_fan_beforeInit: get fan[4] speed=5880
driver-btm-c5.c:2990:check_fan_beforeInit: get fan[5] speed=2280
driver-btm-c5.c:2990:check_fan_beforeInit: get fan[4] speed=5880
driver-btm-c5.c:2990:check_fan_beforeInit: get fan[5] speed=2280
driver-btm-c5.c:2990:check_fan_beforeInit: get fan[4] speed=5880
driver-btm-c5.c:2990:check_fan_beforeInit: get fan[5] speed=2280
driver-btm-c5.c:2990:check_fan_beforeInit: get fan[4] speed=5880
driver-btm-c5.c:2990:check_fan_beforeInit: get fan[5] speed=2280
driver-btm-c5.c:2990:check_fan_beforeInit: get fan[4] speed=5880
driver-btm-c5.c:2990:check_fan_beforeInit: get fan[5] speed=2280
driver-btm-c5.c:2990:check_fan_beforeInit: get fan[4] speed=5880
driver-btm-c5.c:2990:check_fan_beforeInit: get fan[5] speed=2280
driver-btm-c5.c:2990:check_fan_beforeInit: get fan[4] speed=5880
driver-btm-c5.c:2990:check_fan_beforeInit: get fan[5] speed=2280
driver-btm-c5.c:2990:check_fan_beforeInit: get fan[4] speed=5880
driver-btm-c5.c:2990:check_fan_beforeInit: get fan[5] speed=2280
driver-btm-c5.c:2990:check_fan_beforeInit: get fan[4] speed=5880
driver-btm-c5.c:2990:check_fan_beforeInit: get fan[5] speed=2280
driver-btm-c5.c:2990:check_fan_beforeInit: get fan[4] speed=5880
driver-btm-c5.c:2990:check_fan_beforeInit: get fan[5] speed=2280
driver-btm-c5.c:2990:check_fan_beforeInit: get fan[4] speed=5880
driver-btm-c5.c:2990:check_fan_beforeInit: get fan[5] speed=2280
driver-btm-c5.c:2990:check_fan_beforeInit: get fan[4] speed=5880
driver-btm-c5.c:2990:check_fan_beforeInit: get fan[5] speed=2280
driver-btm-c5.c:2990:check_fan_beforeInit: get fan[4] speed=5880
driver-btm-c5.c:2990:check_fan_beforeInit: get fan[5] speed=2280
driver-btm-c5.c:2990:check_fan_beforeInit: get fan[4] speed=5880
driver-btm-c5.c:2990:check_fan_beforeInit: get fan[5] speed=2280
driver-btm-c5.c:2990:check_fan_beforeInit: get fan[4] speed=5880
driver-btm-c5.c:2990:check_fan_beforeInit: get fan[5] speed=2280
driver-btm-c5.c:2990:check_fan_beforeInit: get fan[4] speed=5880
driver-btm-c5.c:2990:check_fan_beforeInit: get fan[5] speed=2280
driver-btm-c5.c:2990:check_fan_beforeInit: get fan[4] speed=5880
driver-btm-c5.c:2990:check_fan_beforeInit: get fan[5] speed=2280
driver-btm-c5.c:2990:check_fan_beforeInit: get fan[4] speed=5880
driver-btm-c5.c:2994:check_fan_beforeInit: Fatal Error: some Fan lost or Fan speed low!