****power off hashboard****

Porfavor ayudarme, acabo de comprar el ASIC sp19j pro + , actuaise e firmware
y me sale un hasrate de 0. Que debo hacer? ayuda.


[    0.000000] [0] Booting Linux on physical CPU 0x0
[    0.000000] [0] Linux version 4.9.38-tag- (jenkins@nomd-nomd-fwc-bj) (gcc version 6.3.1 20170404 (Linaro GCC 6.3-2017.05) ) #1 SMP PREEMPT Wed Jun 28 19:26:22 CST 2023
[    0.000000] [0] Boot CPU: AArch64 Processor [410fd034]
[    0.000000] [0] earlycon: uart0 at MMIO32 0x0000000004140000 (options '')
[    0.000000] [0] bootconsole [uart0] enabled
[    0.000000] [0] efi: Getting EFI parameters from FDT:
[    0.000000] [0] efi: UEFI not found.
[    0.000000] [0] OF: reserved mem: allocated memory for 'ion' node: base 0x000000010df0f000, size 16 MiB
[    0.000000] [0] Ion: Ion memory setup at 0x000000010df0f000 size 16 MiB
[    0.000000] [0] OF: reserved mem: initialized node ion, compatible id ion-region
[    0.000000] [0] OF: reserved mem: allocated memory for 'vip' node: base 0x000000010fa00000, size 4 MiB
[    0.000000] [0] OF: reserved mem: allocated memory for 'vcodec' node: base 0x000000010f800000, size 2 MiB
[    0.000000] [0] OF: reserved mem: allocated memory for 'jpu' node: base 0x000000010f700000, size 1 MiB
[    0.000000] [0] OF: reserved mem: allocated memory for 'linux,cma' node: base 0x000000010f000000, size 6 MiB
[    0.000000] [0] Reserved memory: created CMA memory pool at 0x000000010f000000, size 6 MiB
[    0.000000] [0] OF: reserved mem: initialized node linux,cma, compatible id shared-dma-pool
[    0.000000] [0] On node 0 totalpages: 63744
[    0.000000] [0]   DMA zone: 1024 pages used for memmap
[    0.000000] [0]   DMA zone: 0 pages reserved
[    0.000000] [0]   DMA zone: 63744 pages, LIFO batch:15
[    0.000000] [0] psci: probing for conduit method from DT.
[    0.000000] [0] psci: PSCIv1.0 detected in firmware.
[    0.000000] [0] psci: Using standard PSCI v0.2 function IDs
[    0.000000] [0] psci: Trusted OS migration not required
[    0.000000] [0] percpu: Embedded 22 pages/cpu @ffffffc00f6ad000 s52008 r8192 d29912 u90112
[    0.000000] [0] pcpu-alloc: s52008 r8192 d29912 u90112 alloc=22*4096
[    0.000000] [0] pcpu-alloc: [0] 0 [0] 1 
[    0.000000] [0] Detected VIPT I-cache on CPU0
[    0.000000] [0] CPU features: enabling workaround for ARM erratum 845719
[    0.000000] [0] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 62720
[    0.000000] [0] Kernel command line: console=ttyS0,115200 earlycon loglevel=8 initrd=0x103080000,32M rdinit=/init STORAGE=EMMC
[    0.000000] [0] PID hash table entries: 1024 (order: 1, 8192 bytes)
[    0.000000] [0] Dentry cache hash table entries: 32768 (order: 6, 262144 bytes)
[    0.000000] [0] Inode-cache hash table entries: 16384 (order: 5, 131072 bytes)
[    0.000000] [0] Memory: 168956K/254976K available (6908K kernel code, 868K rwdata, 1956K rodata, 768K init, 485K bss, 79876K reserved, 6144K cma-reserved)
[    0.000000] [0] Virtual kernel memory layout:
[    0.000000] [0]     modules : 0xffffff8000000000 - 0xffffff8008000000   (   128 MB)
[    0.000000] [0]     vmalloc : 0xffffff8008000000 - 0xffffffbebfff0000   (   250 GB)
[    0.000000] [0]       .text : 0xffffff8008080000 - 0xffffff8008740000   (  6912 KB)
[    0.000000] [0]     .rodata : 0xffffff8008740000 - 0xffffff8008930000   (  1984 KB)
[    0.000000] [0]       .init : 0xffffff8008930000 - 0xffffff80089f0000   (   768 KB)
[    0.000000] [0]       .data : 0xffffff80089f0000 - 0xffffff8008ac9200   (   869 KB)
[    0.000000] [0]        .bss : 0xffffff8008ac9200 - 0xffffff8008b426d8   (   486 KB)
[    0.000000] [0]     fixed   : 0xffffffbefe7fd000 - 0xffffffbefec00000   (  4108 KB)
[    0.000000] [0]     PCI I/O : 0xffffffbefee00000 - 0xffffffbeffe00000   (    16 MB)
[    0.000000] [0]     vmemmap : 0xffffffbf00000000 - 0xffffffc000000000   (     4 GB maximum)
[    0.000000] [0]               0xffffffbf00000000 - 0xffffffbf00400000   (     4 MB actual)
[    0.000000] [0]     memory  : 0xffffffc000000000 - 0xffffffc010000000   (   256 MB)
[    0.000000] [0] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[    0.000000] [0] Preemptible hierarchical RCU implementation.
[    0.000000] [0] 	Build-time adjustment of leaf fanout to 64.
[    0.000000] [0] 	RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=2.
[    0.000000] [0] RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=2
[    0.000000] [0] NR_IRQS:64 nr_irqs:64 0
[    0.000000] [0] GIC: Using split EOI/Deactivate mode
[    0.000000] [0] arm_arch_timer: Architected cp15 timer(s) running at 25.00MHz (phys).
[    0.000000] [0] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x5c40939b5, max_idle_ns: 440795202646 ns
[    0.000003] [0] sched_clock: 56 bits at 25MHz, resolution 40ns, wraps every 4398046511100ns
[    0.008844] [0] Console: colour dummy device 80x25
[    0.013815] [0] Calibrating delay loop (skipped), value calculated using timer frequency.. 50.00 BogoMIPS (lpj=100000)
[    0.024877] [0] pid_max: default: 32768 minimum: 301
[    0.030117] [0] Mount-cache hash table entries: 512 (order: 0, 4096 bytes)
[    0.037226] [0] Mountpoint-cache hash table entries: 512 (order: 0, 4096 bytes)
[    0.045389] [0] ftrace: allocating 23539 entries in 92 pages
[    0.095092] [0] ASID allocator initialised with 65536 entries
[    0.134260] [0] EFI services will not be available.
[    0.167551] [1] Detected VIPT I-cache on CPU1
[    0.167604] [1] CPU1: Booted secondary processor [410fd034]
[    0.167693] [0] Brought up 2 CPUs
[    0.181387] [0] SMP: Total of 2 processors activated.
[    0.186614] [0] CPU features: detected feature: 32-bit EL0 Support
[    0.193009] [0] CPU: All CPU(s) started at EL2
[    0.197623] [0] alternatives: patching kernel code
[    0.203176] [0] devtmpfs: initialized
[    0.213675] [0] DMI not present or invalid.
[    0.218326] [0] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[    0.228765] [0] futex hash table entries: 512 (order: 4, 65536 bytes)
[    0.235763] [0] pinctrl core: initialized pinctrl subsystem
[    0.242077] [0] NET: Registered protocol family 16
[    0.248114] [0] vdso: 2 pages (1 code @ ffffff8008747000, 1 data @ ffffff80089f4000)
[    0.256144] [0] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.
[    0.264873] [0] DMA: preallocated 4096 KiB pool for atomic allocations
[    0.272247] [0] clk reset: nr_reset=64 resource_size=8
[    0.290393] [0] persistent_ram: uncorrectable error in header
[    0.296436] [0] persistent_ram: uncorrectable error in header
[    0.302479] [0] persistent_ram: uncorrectable error in header
[    0.308440] [0] pstore: using zlib compression
[    0.320963] [0] console [pstore-1] enabled
[    0.325497] [0] pstore: Registered ramoops as persistent store backend
[    0.332363] [0] ramoops: attached 0xf000@0xe000000, ecc: 16/0
[    0.356652] [0] dw_dmac 4330000.dma: CVITEK DMA Controller, 8 channels, probe done!
[    0.365271] [0] SCSI subsystem initialized
[    0.369856] [0] usbcore: registered new interface driver usbfs
[    0.376063] [0] usbcore: registered new interface driver hub
[    0.382062] [0] usbcore: registered new device driver usb
[    0.389810] [0] pps_core: LinuxPPS API ver. 1 registered
[    0.395434] [0] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[    0.405363] [0] PTP clock support registered
[    0.409973] [0] dmi: Firmware registration failed.
[    0.415384] [0] Ion: ion_parse_dt_heap_common: id 0 type 2 name carveout align 1000
[    0.423631] [0] Ion: rmem_ion_device_init: heap carveout base 0x000000010df0f000 size 0x0000000001000000 dev ffffffc00c964810
[    0.435428] [0] platform carveout: assigned reserved memory node ion
[    0.445803] [0] platform carveout: [ion] add heap id 0, type 2, base 0x10df0f000, size 0x1000000
[    0.455257] [0] tee_cv_init_clk
[    0.458655] [0] Advanced Linux Sound Architecture Driver Initialized.
[    0.466388] [0] clocksource: Switched to clocksource arch_sys_counter
[    0.551723] [0] NET: Registered protocol family 2
[    0.557299] [0] TCP established hash table entries: 2048 (order: 2, 16384 bytes)
[    0.565053] [0] TCP bind hash table entries: 2048 (order: 4, 65536 bytes)
[    0.572230] [0] TCP: Hash tables configured (established 2048 bind 2048)
[    0.579320] [0] UDP hash table entries: 256 (order: 2, 24576 bytes)
[    0.585888] [0] UDP-Lite hash table entries: 256 (order: 2, 24576 bytes)
[    0.593134] [0] NET: Registered protocol family 1
[    0.598545] [0] RPC: Registered named UNIX socket transport module.
[    0.605148] [0] RPC: Registered udp transport module.
[    0.610432] [0] RPC: Registered tcp transport module.
[    0.615765] [0] RPC: Registered tcp NFSv4.1 backchannel transport module.
[    0.623108] [0] Unpacking initramfs...
[    1.310894] [0] Freeing initrd memory: 32768K (ffffffc003080000 - ffffffc005080000)
[    1.319298] [0] hw perfevents: enabled with armv8_cortex_a53 PMU driver, 7 counters available
[    1.330658] [0] workingset: timestamp_bits=62 max_order=16 bucket_order=0
[    1.350869] [0] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[    1.358699] [0] jffs2: version 2.2. (NAND) (SUMMARY)  © 2001-2006 Red Hat, Inc.
[    1.367680] [1] cryptomgr_test (33) used greatest stack depth: 14800 bytes left
[    1.377929] [0] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 247)
[    1.386078] [0] io scheduler noop registered
[    1.390565] [0] io scheduler deadline registered
[    1.395439] [0] io scheduler cfq registered (default)
[    1.402158] [0] cvitek,pinctrl-cv1835 3001000.pinctrl: initialized cvitek pin control driver
[    1.490761] [1] Serial: 8250/16550 driver, 5 ports, IRQ sharing disabled
[    1.500662] [1] console [ttyS0] disabled
[    1.504897] [1] 4140000.serial: ttyS0 at MMIO 0x4140000 (irq = 19, base_baud = 1562500) is a 16550A
[    1.514465] [1] console [ttyS0] enabled
[    1.522472] [1] bootconsole [uart0] disabled
[    1.532874] [1] 4150000.serial: ttyS1 at MMIO 0x4150000 (irq = 20, base_baud = 12500000) is a 16550A
[    1.543806] [1] 4160000.serial: ttyS2 at MMIO 0x4160000 (irq = 21, base_baud = 12500000) is a 16550A
[    1.554789] [1] 4170000.serial: ttyS3 at MMIO 0x4170000 (irq = 22, base_baud = 12500000) is a 16550A
[    1.565745] [1] 41c0000.serial: ttyS4 at MMIO 0x41c0000 (irq = 23, base_baud = 12500000) is a 16550A
[    1.600438] [1] loop: module loaded
[    1.605406] [1] libphy: Fixed MDIO Bus: probed
[    1.612723] [1] Hash table entries set to unexpected value 0
[    1.618685] [1] bm-dwmac 4510000.ethernet: no reset control found
[    1.625313] [1] stmmac - user ID: 0x0, Synopsys ID: 0x50
[    1.630887] [1] bm-dwmac 4510000.ethernet: DMA HW capability register supported
[    1.638560] [1] bm-dwmac 4510000.ethernet: RX Checksum Offload Engine supported
[    1.646181] [1] bm-dwmac 4510000.ethernet: TX Checksum insertion supported
[    1.653407] [1] bm-dwmac 4510000.ethernet: TSO supported
[    1.658968] [1] bm-dwmac 4510000.ethernet: TSO feature enabled
[    1.665115] [1] bm-dwmac 4510000.ethernet: Enable RX Mitigation via HW Watchdog Timer
[    1.677477] [0] modprobe (66) used greatest stack depth: 13936 bytes left
[    1.687770] [0] modprobe (67) used greatest stack depth: 13408 bytes left
[    1.749337] [1] modprobe (83) used greatest stack depth: 13376 bytes left
[    1.907810] [1] libphy: stmmac: probed
[    1.911851] [1] CVITEK CVI18XX stmmac-0:00: attached PHY driver [CVITEK CVI18XX] (mii_bus:phy_addr=stmmac-0:00, irq=-1)
[    1.923118] [1] CVITEK CVI18XX stmmac-0:01: attached PHY driver [CVITEK CVI18XX] (mii_bus:phy_addr=stmmac-0:01, irq=-1)
[    1.936186] [1] mousedev: PS/2 mouse device common for all mice
[    1.942622] [1] i2c /dev entries driver
[    1.948178] [1] sdhci: Secure Digital Host Controller Interface driver
[    1.955023] [1] sdhci: Copyright(c) Pierre Ossman
[    1.959962] [1] sdhci-pltfm: SDHCI platform and OF driver helper
[    1.966495] [1] cvi:sdhci_cvi_probe
[    1.972332] [1] mmc0: Host Controller version 3
[    2.022418] [1] mmc0: SDHCI controller on 4300000.cv-emmc [4300000.cv-emmc] using ADMA 64-bit
[    2.032423] [1] cvi:sdhci_cvi_probe
[    2.039691] [1] mmc1: Host Controller version 3
[    2.090415] [1] mmc1: SDHCI controller on 4310000.cv-sd [4310000.cv-sd] using ADMA 64-bit
[    2.131936] [0] usbcore: registered new interface driver usbhid
[    2.138151] [0] usbhid: USB HID core driver
[    2.142912] [0] optee: probing for conduit method from DT.
[    2.149219] [1] optee: initialized driver
[    2.153723] [1] Netfilter messages via NETLINK v0.30.
[    2.159668] [1] nf_conntrack version 0.5.0 (2048 buckets, 8192 max)
[    2.166589] [0] nf_tables: (c) 2007-2009 Patrick McHardy <kaber@trash.net>
[    2.173798] [0] nf_tables_compat: (c) 2012 Pablo Neira Ayuso <pablo@netfilter.org>
[    2.182075] [0] ip_tables: (C) 2000-2006 Netfilter Core Team
[    2.189352] [0] NET: Registered protocol family 10
[    2.195519] [0] random: fast init done
[    2.200325] [0] ip6_tables: (C) 2000-2006 Netfilter Core Team
[    2.206667] [0] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver
[    2.214451] [0] NET: Registered protocol family 17
[    2.219619] [0] 8021q: 802.1Q VLAN Support v1.8
[    2.225771] [0] registered taskstats version 1
[    2.254570] [0] Key type encrypted registered
[    2.288075] [0] hctosys: unable to open rtc device (rtc0)
[    2.294363] [0] ALSA device list:
[    2.297938] [0]   No soundcards found.
[    2.302725] [0] Freeing unused kernel memory: 768K (ffffffc000930000 - ffffffc0009f0000)
[    2.475284] [1] mmc0: new HS200 MMC card at address 0001
[    2.486423] [1] mmcblk0: mmc0:0001 SPeMMC 3.64 GiB 
[    2.496739] [1] mmcblk0boot0: mmc0:0001 SPeMMC partition 1 4.00 MiB
[    2.508220] [1] mmcblk0boot1: mmc0:0001 SPeMMC partition 2 4.00 MiB
[    2.518528] [1] mmcblk0rpmb: mmc0:0001 SPeMMC partition 3 4.00 MiB
[    2.527773] [1] Alternate GPT is invalid, using primary GPT.
[    2.533838] [1]  mmcblk0: p1 p2 p3 p4 p5 p6 p7
[    5.956188] [0] e2fsck (197) used greatest stack depth: 12928 bytes left
[    6.454907] [0] EXT4-fs (mmcblk0p5): mounted filesystem without journal. Opts: (null)
[    6.464006] [0] mount (204) used greatest stack depth: 12672 bytes left
[    6.480166] [1] EXT4-fs (mmcblk0p6): mounted filesystem without journal. Opts: (null)
[    6.499080] [0] EXT4-fs (mmcblk0p7): mounted filesystem without journal. Opts: (null)
[    6.570880] [1] cv183x_pwm: bad vermagic: kernel tainted.
[    6.576629] [1] Disabling lock debugging due to kernel taint
[    6.582668] [1] cv183x_pwm: loading out-of-tree module taints kernel.
[    6.602500] [0] CVITEK CHIP ID = 2
[    6.837427] [1] do_smccc_smc: a=0x3000006 0x0 0x1000
[    6.842997] [1] do_smccc_smc: r=0x100 0x0
[    6.851897] [1] bm-dwmac 4510000.ethernet eth0: device MAC address 56:6d:31:72:e4:79
[    6.930875] [1] CVITEK CVI18XX stmmac-0:00: attached PHY driver [CVITEK CVI18XX] (mii_bus:phy_addr=stmmac-0:00, irq=-1)
[    6.954059] [1] dwmac4: Master AXI performs any burst length
[    6.960083] [1] bm-dwmac 4510000.ethernet eth0: IEEE 1588-2008 Advanced Timestamp supported
[    6.969246] [1] bm-dwmac 4510000.ethernet eth0: registered PTP clock
[    6.976273] [1] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[    6.983579] [1] ifconfig (316) used greatest stack depth: 12608 bytes left
[    6.991795] [1] Enable CVITEK ethernet phy ultra auto power saving mode
[    7.130879] [0] CVITEK CVI18XX stmmac-0:00: attached PHY driver [CVITEK CVI18XX] (mii_bus:phy_addr=stmmac-0:00, irq=-1)
[    7.154105] [0] dwmac4: Master AXI performs any burst length
[    7.160077] [0] bm-dwmac 4510000.ethernet eth0: IEEE 1588-2008 Advanced Timestamp supported
[    7.169175] [0] bm-dwmac 4510000.ethernet eth0: registered PTP clock
[    7.176096] [0] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[    7.184040] [0] Enable CVITEK ethernet phy ultra auto power saving mode
[    7.656874] [1] dmesg (477) used greatest stack depth: 12384 bytes left
[   10.247004] [0] bm-dwmac 4510000.ethernet eth0: Link is Up - 100Mbps/Full - flow control rx/tx
[   10.256070] [0] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[   12.368561] [1] register uart_trans chrdev success.
[   12.375144] [1] ttyS1, serial8250_request_dma
[   12.379955] [1] ttyS1, get NULL TX chan
[   12.384903] [1] ttyS1, serial8250_do_set_termios, ispeed=9600, o_speed=9600
[   12.392214] [1] Set baud rate to 115200, quot=108
[   12.397183] [1] ttyS1 default_serial_dl_write, baudrate=115200, value=108
[   12.404346] [1] tty port open success [/dev/ttyS1]!
[   12.409588] [1] ttyS1, serial8250_do_set_termios, ispeed=115200, o_speed=115200
[   12.417245] [1] Set baud rate to 115200, quot=108
[   12.422213] [1] ttyS1 default_serial_dl_write, baudrate=115200, value=108
[   12.429307] [1] init sucess for tty struct (4:65)  [/dev/ttyS1]
[   12.436351] [1] ttyS2, serial8250_request_dma
[   12.440975] [1] ttyS2, get NULL TX chan
[   12.445765] [1] ttyS2, serial8250_do_set_termios, ispeed=9600, o_speed=9600
[   12.453054] [1] Set baud rate to 115200, quot=108
[   12.458023] [1] ttyS2 default_serial_dl_write, baudrate=115200, value=108
[   12.465151] [1] tty port open success [/dev/ttyS2]!
[   12.470403] [1] ttyS2, serial8250_do_set_termios, ispeed=115200, o_speed=115200
[   12.478032] [1] Set baud rate to 115200, quot=108
[   12.482998] [1] ttyS2 default_serial_dl_write, baudrate=115200, value=108
[   12.490097] [1] init sucess for tty struct (4:66)  [/dev/ttyS2]
[   12.497135] [1] ttyS3, serial8250_request_dma
[   12.501762] [1] ttyS3, get NULL TX chan
[   12.506612] [1] ttyS3, serial8250_do_set_termios, ispeed=9600, o_speed=9600
[   12.513885] [1] Set baud rate to 115200, quot=108
[   12.518851] [1] ttyS3 default_serial_dl_write, baudrate=115200, value=108
[   12.525958] [1] tty port open success [/dev/ttyS3]!
[   12.531213] [1] ttyS3, serial8250_do_set_termios, ispeed=115200, o_speed=115200
[   12.538858] [1] Set baud rate to 115200, quot=108
[   12.543826] [1] ttyS3 default_serial_dl_write, baudrate=115200, value=108
[   12.550939] [1] init sucess for tty struct (4:67)  [/dev/ttyS3]
[   12.557997] [1] ttyS4, serial8250_request_dma
[   12.562629] [1] ttyS4, get NULL TX chan
[   12.567453] [1] ttyS4, serial8250_do_set_termios, ispeed=9600, o_speed=9600
[   12.574730] [1] Set baud rate to 115200, quot=108
[   12.579697] [1] ttyS4 default_serial_dl_write, baudrate=115200, value=108
[   12.586810] [1] tty port open success [/dev/ttyS4]!
[   12.592047] [1] ttyS4, serial8250_do_set_termios, ispeed=115200, o_speed=115200
[   12.599681] [1] Set baud rate to 115200, quot=108
[   12.604648] [1] ttyS4 default_serial_dl_write, baudrate=115200, value=108
[   12.611748] [1] init sucess for tty struct (4:68)  [/dev/ttyS4]
[   12.618173] [1] create workqueue success!
[   12.622699] [1] insmod (609) used greatest stack depth: 12288 bytes left
[   13.721309] [0] random: crng init done
[   31.103705] [0] uart trans dev open.
[   31.107591] [0] uart_buf virt addr = 0xffffffc0037c0000
[   31.113188] [0] uart_buf phys addr = 0x1037c0000
[   31.118054] [0] uart_buf pfn       = 0x001037c0
[   31.125434] [0] uart trans stop send work timer.
[   31.130480] [0] uart trans set chain exist bits:0x7.
[   31.135739] [0] uart trans set work queue count 768.
[   47.023657] [1] cgminer-api (1496) used greatest stack depth: 12064 bytes left
[   86.024680] [0] uart set baud to: 4098
[   86.029398] [0] uart set baud to: 4098
[   86.033427] [0] uart set baud to: 4098
[  100.128760] [0] uart trans stop send work timer.
[  103.815615] [0] uart trans start send work timer.
[  103.821409] [0] uart trans new test.
[  192.220668] [0] ntpd (350) used greatest stack depth: 11440 bytes left


===========================================Miner log===========================================
1970-01-01 00:00:12 Miner compile time: Wed Jun 28 19:13:14 CST 2023 type: Antminer BHB42XXX sn :YNAHADUBCJIJE07P2
1970-01-01 00:00:13 This is fix-freq version
1970-01-01 00:00:13 Miner compile time: Wed Jun 28 19:13:14 CST 2023 type: Antminer BHB42XXX
1970-01-01 00:00:13 Miner sn: YNAHADUBCJIJE07P2
1970-01-01 00:00:13 commit version: 1180224 2023-06-28 17:51:54, build by: jenkins 2023-06-28 19:23:27
1970-01-01 00:00:13 opt_multi_version     = 1
1970-01-01 00:00:13 opt_bitmain_ab        = 1
1970-01-01 00:00:13 mid_auto_gen          = 1
1970-01-01 00:00:13 opt_bitmain_work_mode = 3
1970-01-01 00:00:13 port 427 already exported
1970-01-01 00:00:13 port 429 already exported
1970-01-01 00:00:13 port 431 already exported
1970-01-01 00:00:13 port 433 already exported
1970-01-01 00:00:13 no board pluged in socket 432
1970-01-01 00:00:13 port 434 already exported
1970-01-01 00:00:13 port 435 already exported
1970-01-01 00:00:13 port 447 already exported
1970-01-01 00:00:13 port 406 already exported
1970-01-01 00:00:13 Note: front fan is power on!
1970-01-01 00:00:13 Note: rear fan is power on!
1970-01-01 00:00:13 start the http log.
1970-01-01 00:00:13 start listen on 6060 ...
1970-01-01 00:00:13 httpListenThread start ret=0
1970-01-01 00:00:18 ==========================capability start==========================
1970-01-01 00:00:18 board num = 3
1970-01-01 00:00:18 board id = 0, chain num = 1
1970-01-01 00:00:18 	chain id = 0
1970-01-01 00:00:18 board id = 1, chain num = 1
1970-01-01 00:00:18 	chain id = 1
1970-01-01 00:00:18 board id = 2, chain num = 1
1970-01-01 00:00:18 	chain id = 2
1970-01-01 00:00:18 ==========================capability end============================
1970-01-01 00:00:18 chain num = 3
1970-01-01 00:00:18 skip loading levels for now
2024-02-05 15:52:57 load chain 0 eeprom data
2024-02-05 15:53:01 load chain 1 eeprom data
2024-02-05 15:53:05 load chain 2 eeprom data
2024-02-05 15:53:05 miner type: Antminer S19j Pro+
2024-02-05 15:53:05 multi machine mode
2024-02-05 15:53:05 load machine BHB42612 conf
2024-02-05 15:53:05 machine : BHB42612 
2024-02-05 15:53:05 chain_num 4, chain_domain_num 40, chain_asic_num 120, domain_asic_num 3
2024-02-05 15:53:05 get mix boardname[0][BHB42612], name:BHB42612
2024-02-05 15:53:05 fan_eft : 0  fan_pwm : 100
2024-02-05 15:53:05 create thread get_nonce_and_register_thread
2024-02-05 15:53:05 fixed working voltage = 1340
2024-02-05 15:53:05 fixed frequency is 660
2024-02-05 15:53:05 Chain [0] PCB Version: 0x0100
2024-02-05 15:53:05 Chain [0] BOM Version: 0x0010
2024-02-05 15:53:05 Chain [1] PCB Version: 0x0100
2024-02-05 15:53:05 Chain [1] BOM Version: 0x0010
2024-02-05 15:53:05 Chain [2] PCB Version: 0x0100
2024-02-05 15:53:05 Chain [2] BOM Version: 0x0010
2024-02-05 15:53:05 Fan check passed.
2024-02-05 15:53:05 uart_trans addr:0xf7273000.
2024-02-05 15:53:05 max sensor num = 4
2024-02-05 15:53:05 STATUS_INITED: soc init done!
2024-02-05 15:53:05 temperature_monitor_thread start...
2024-02-05 15:53:08 start to init...
2024-02-05 15:53:08 i2c_sim_init start
2024-02-05 15:53:08 power i2c device:sim_dev addr:0x10 fd:255
2024-02-05 15:53:08 i2c_sim_init end
2024-02-05 15:53:09 power open power_version = 0x75
2024-02-05 15:53:12 power is Calibrated
2024-02-05 15:53:12 power sn:KLKT323BCJFCJ2926
2024-02-05 15:53:12 enable_power_calibration,calibration date:211208.
2024-02-05 15:53:13 power type version: 0x0075
2024-02-05 15:53:15 disable power watchdog: 0x0000
2024-02-05 15:53:16 Initializing the power, please wait, this may take up to 2 minutes...
2024-02-05 15:53:47 Slept 30 seconds, diff = 0.
2024-02-05 15:53:50 set_voltage_by_steps to 1500.
2024-02-05 15:54:00 start up min temp by 75a = 23
2024-02-05 15:54:03 Chain[0]: find 120 asic, times 0
2024-02-05 15:54:05 Chain[1]: find 54 asic, times 0
2024-02-05 15:54:07 Chain[1]: find 54 asic, times 1
2024-02-05 15:54:09 Chain[1]: find 54 asic, times 2
2024-02-05 15:54:09 Chain 1 only find 54 asic, will power off hash board 1
2024-02-05 15:54:11 Chain[2]: find 120 asic, times 0
2024-02-05 15:54:11 ERROR_SOC_INIT: soc init failed!
2024-02-05 15:54:11 stop_mining: soc init failed!
2024-02-05 15:54:11 uninit_temp_info
2024-02-05 15:54:11 do not read temp anymore...
2024-02-05 15:54:11 cancel thread
2024-02-05 15:54:11 ****power off hashboard****
2024-02-05 15:54:12 temp monitor thread exit
2024-02-05 15:54:18 Version num 65536
2024-02-05 15:54:18 Mask num 0x1fffe000
2024-02-05 15:54:18 opt_multi_version = 65536, interval timeout = 3031741
2024-02-05 15:54:18 freq = 510, percent = 90, hcn = 5140, timeout = 3031741