KA3 and extranonce
hi,
Is the KA3 extranonce compatible? and how to activate it
thank.
-
Dear Customer,
If you have any questions please feel free to contact us.
Please send email to customersupport@bitmain.com
We will reply to your question as soon as possible.
-
- Power Cycle: Restart the miner by turning it off and then back on to reset the system.
- Check Connections: Ensure all cables and connectors are securely attached and not damaged.
- Inspect Power Supply: Verify that the power supply is functioning correctly and providing adequate power to the miner.
- Temperature Check: Ensure the miner is operating within the recommended temperature range and is well-ventilated.
- Firmware Update: Update the miner’s firmware to the latest version like faircrest cabinetry as outdated firmware can cause initialization errors.
- Reset Configuration: Perform a factory reset on the miner to restore default settings and clear any configuration issues.
- Examine Logs: Review the miner’s log files for detailed error messages that may provide more insight into the problem.
- Contact Support: Reach out to the manufacturer’s support team for assistance if the issue persists.
- Test with Different Hardware: If possible, test the miner with a different power supply or cables to rule out hardware faults.
- Check Network: Ensure that the network settings are correctly configured and the miner is connected to the network properly.
- Consult Community: Visit online forums or communities for advice from other users who may have experienced similar issues.
- Review Documentation: Refer to the Antminer S17e manual or technical documentation for specific troubleshooting steps related to ERROR_SOC_INIT.
-
Dear Customer,
If you have any questions please feel free to contact us.
Please creat support ticket by https://support.bitmain.com/hc/en-us/requests/new
Or send email to customersupport@bitmain.com
We will reply to your question as soon as possible.
-
- Power Cycle: Restart the miner by turning it off and then back on to reset the system.
- Check Connections: Ensure all cables and connectors are securely attached and not damaged.
- Inspect Power Supply: Verify that the power supply is functioning correctly and providing adequate power to the miner.
- Temperature Check: Ensure the miner is operating within the recommended temperature range and is well-ventilated.
- Firmware Update: Update the miner’s firmware to the latest version like How much does a hair transplant cost in Turkey? as outdated firmware can cause initialization errors.
- Reset Configuration: Perform a factory reset on the miner to restore default settings and clear any configuration issues.
- Examine Logs: Review the miner’s log files for detailed error messages that may provide more insight into the problem.
- Contact Support: Reach out to the manufacturer’s support team for assistance if the issue persists.
- Test with Different Hardware: If possible, test the miner with a different power supply or cables to rule out hardware faults.
- Check Network: Ensure that the network settings are correctly configured and the miner is connected to the network properly.
- Consult Community: Visit online forums or communities for advice from other users who may have experienced similar issues.
- Review Documentation: Refer to the Antminer S17e manual or technical documentation for specific troubleshooting steps related to ERROR_SOC_INIT.
-
Dear Customer,
If you have any questions please feel free to contact us.
Please send email to customersupport@bitmain.com
We will reply to your question as soon as possible.
Please sign in to leave a comment.
Comments
6 comments