Antminer hashes and then shuts down every 12 hours
Here is the log
1970-01-01 00:00:10 Open miner sn file /config/sn error
1970-01-01 00:00:10 Miner compile time: Mon Dec 26 17:09:26 CST 2022 type: Antminer BHB42XXX sn :
1970-01-01 00:00:11 This is fix-freq version
1970-01-01 00:00:11 Miner compile time: Mon Dec 26 17:09:26 CST 2022 type: Antminer BHB42XXX
1970-01-01 00:00:11 commit version: f2ab6bc 2022-12-26 17:08:34, build by: jenkins 2022-12-26 17:09:25
1970-01-01 00:00:11 opt_multi_version = 1
1970-01-01 00:00:11 opt_bitmain_ab = 1
1970-01-01 00:00:11 mid_auto_gen = 0
1970-01-01 00:00:11 opt_bitmain_work_mode = 0
1970-01-01 00:00:11 mmap fpga_mem_addr_hal = 0xb5800000
1970-01-01 00:00:11 HASH_ON_PLUG V9 = 0x7
1970-01-01 00:00:11 Note: front fan is power on!
1970-01-01 00:00:11 Note: rear fan is power on!
1970-01-01 00:00:11 start the http log.
1970-01-01 00:00:11 httpListenThread start ret=0
1970-01-01 00:00:11 start listen on 6060 ...
1970-01-01 00:00:17 miner ID : 811c2d801c20881c
1970-01-01 00:00:17 FPGA Version = 0xB042
1970-01-01 00:00:17 HASH_ON_PLUG V9 = 0x7
1970-01-01 00:00:17 ==========================capability start==========================
1970-01-01 00:00:17 board num = 3
1970-01-01 00:00:17 board id = 0, chain num = 1
1970-01-01 00:00:17 chain id = 0
1970-01-01 00:00:17 board id = 1, chain num = 1
1970-01-01 00:00:17 chain id = 1
1970-01-01 00:00:17 board id = 2, chain num = 1
1970-01-01 00:00:17 chain id = 2
1970-01-01 00:00:17 ==========================capability end============================
1970-01-01 00:00:17 chain num = 3
1970-01-01 00:00:17 skip loading levels for now
2023-08-12 00:06:59 load chain 0 eeprom data
2023-08-12 00:07:06 load chain 1 eeprom data
2023-08-12 00:07:13 load chain 2 eeprom data
2023-08-12 00:07:15 power open power_version = 0x74
2023-08-12 00:07:15 power is not Calibrated
2023-08-12 00:07:18 miner type: Antminer S19j Pro
2023-08-12 00:07:18 multi machine mode
2023-08-12 00:07:18 load machine BHB42601 conf
2023-08-12 00:07:18 machine : BHB42601
2023-08-12 00:07:18 chain_num 4, chain_domain_num 42, chain_asic_num 126, domain_asic_num 3
2023-08-12 00:07:18 abandon mix board!
2023-08-12 00:07:18 abandon mix board!
2023-08-12 00:07:18 fan_eft : 0 fan_pwm : 100
2023-08-12 00:07:18 create thread get_nonce_and_register_thread
2023-08-12 00:07:18 fixed working voltage = 1360
2023-08-12 00:07:18 fixed frequency is 545
2023-08-12 00:07:18 Chain [0] PCB Version: 0x0120
2023-08-12 00:07:18 Chain [0] BOM Version: 0x0010
2023-08-12 00:07:18 Chain [1] PCB Version: 0x0120
2023-08-12 00:07:18 Chain [1] BOM Version: 0x0010
2023-08-12 00:07:18 Chain [2] PCB Version: 0x0120
2023-08-12 00:07:18 Chain [2] BOM Version: 0x0010
2023-08-12 00:07:18 Fan check passed.
2023-08-12 00:07:19 chain[0] PIC jump to app
2023-08-12 00:07:20 Check chain[0] PIC fw version=0x89
2023-08-12 00:07:22 chain[1] PIC jump to app
2023-08-12 00:07:23 Check chain[1] PIC fw version=0x89
2023-08-12 00:07:24 chain[2] PIC jump to app
2023-08-12 00:07:26 Check chain[2] PIC fw version=0x89
2023-08-12 00:07:26 create thread pic_heart_beat_thread
2023-08-12 00:07:26 max sensor num = 4
2023-08-12 00:07:26 STATUS_INITED: soc init done!
2023-08-12 00:07:27 temperature_monitor_thread start...
2023-08-12 00:07:29 start to init...
2023-08-12 00:07:29 warning:power is not calibration.
2023-08-12 00:07:32 power type version: 0x0074
2023-08-12 00:07:32 Initializing the power, please wait, this may take up to 2 minutes...
2023-08-12 00:08:03 Slept 30 seconds, diff = 1.
2023-08-12 00:08:03 set_voltage_by_steps to 1500.
2023-08-12 00:08:08 chain avg vol rise to 15.37
2023-08-12 00:08:09 start up min temp by 75a = 30
2023-08-12 00:08:09 set UART baud to 115200
2023-08-12 00:08:19 Chain[0]: find 126 asic, times 0
2023-08-12 00:08:29 Chain[1]: find 126 asic, times 0
2023-08-12 00:08:40 Chain[2]: find 126 asic, times 0
2023-08-12 00:08:45 pulse_mode = 1, ccdly_sel = 0, pwth_sel = 1
2023-08-12 00:08:49 Bring up temperature is 31
2023-08-12 00:08:50 set UART baud to 12000000
2023-08-12 00:08:50 create thread check_miner_status_thread
2023-08-12 00:08:50 create thread check_system_work_thread
2023-08-12 00:08:50 set_voltage_by_steps to 1450.
2023-08-12 00:08:53 pulse_mode = 1, ccdly_sel = 0, pwth_sel = 1
2023-08-12 00:08:53 start do_core_reset
2023-08-12 00:09:14 end do_core_reset
2023-08-12 00:09:14 chain[0] min = 545 max =545
2023-08-12 00:09:14 chain[1] min = 545 max =545
2023-08-12 00:09:14 chain[2] min = 545 max =545
2023-08-12 00:09:14 1.inc all chain freq to 545
2023-08-12 00:09:14 fixed step freq_start = 50, freq_end = 545, freq_step = 6.25
2023-08-12 00:09:14 chain = 0 set freq to 56.25
2023-08-12 00:09:14 chain = 1 set freq to 56.25
2023-08-12 00:09:14 chain = 2 set freq to 56.25
2023-08-12 00:09:15 chain = 0 set freq to 62.50
2023-08-12 00:09:15 chain = 1 set freq to 62.50
2023-08-12 00:09:15 chain = 2 set freq to 62.50
2023-08-12 00:09:15 chain = 0 set freq to 68.75
2023-08-12 00:09:15 chain = 1 set freq to 68.75
2023-08-12 00:09:15 chain = 2 set freq to 68.75
2023-08-12 00:09:15 chain = 0 set freq to 75.00
2023-08-12 00:09:15 chain = 1 set freq to 75.00
2023-08-12 00:09:15 chain = 2 set freq to 75.00
2023-08-12 00:09:16 chain = 0 set freq to 81.25
2023-08-12 00:09:16 chain = 1 set freq to 81.25
2023-08-12 00:09:16 chain = 2 set freq to 81.25
2023-08-12 00:09:16 chain = 0 set freq to 87.50
2023-08-12 00:09:16 chain = 1 set freq to 87.50
2023-08-12 00:09:16 chain = 2 set freq to 87.50
2023-08-12 00:09:16 chain = 0 set freq to 93.75
2023-08-12 00:09:16 chain = 1 set freq to 93.75
2023-08-12 00:09:16 chain = 2 set freq to 93.75
2023-08-12 00:09:16 chain = 0 set freq to 100.00
2023-08-12 00:09:16 chain = 1 set freq to 100.00
2023-08-12 00:09:16 chain = 2 set freq to 100.00
2023-08-12 00:09:17 chain = 0 set freq to 106.25
2023-08-12 00:09:17 chain = 1 set freq to 106.25
2023-08-12 00:09:17 chain = 2 set freq to 106.25
2023-08-12 00:09:17 chain = 0 set freq to 112.50
2023-08-12 00:09:17 chain = 1 set freq to 112.50
2023-08-12 00:09:17 chain = 2 set freq to 112.50
2023-08-12 00:09:17 chain = 0 set freq to 118.75
2023-08-12 00:09:17 chain = 1 set freq to 118.75
2023-08-12 00:09:17 chain = 2 set freq to 118.75
2023-08-12 00:09:18 chain = 0 set freq to 125.00
2023-08-12 00:09:18 chain = 1 set freq to 125.00
2023-08-12 00:09:18 chain = 2 set freq to 125.00
2023-08-12 00:09:18 chain = 0 set freq to 131.25
2023-08-12 00:09:18 chain = 1 set freq to 131.25
2023-08-12 00:09:18 chain = 2 set freq to 131.25
2023-08-12 00:09:18 chain = 0 set freq to 137.50
2023-08-12 00:09:18 chain = 1 set freq to 137.50
2023-08-12 00:09:18 chain = 2 set freq to 137.50
2023-08-12 00:09:19 chain = 0 set freq to 143.75
2023-08-12 00:09:19 chain = 1 set freq to 143.75
2023-08-12 00:09:19 chain = 2 set freq to 143.75
2023-08-12 00:09:19 chain = 0 set freq to 150.00
2023-08-12 00:09:19 chain = 1 set freq to 150.00
2023-08-12 00:09:19 chain = 2 set freq to 150.00
2023-08-12 00:09:19 chain = 0 set freq to 156.25
2023-08-12 00:09:19 chain = 1 set freq to 156.25
2023-08-12 00:09:19 chain = 2 set freq to 156.25
2023-08-12 00:09:20 chain = 0 set freq to 162.50
2023-08-12 00:09:20 chain = 1 set freq to 162.50
2023-08-12 00:09:20 chain = 2 set freq to 162.50
2023-08-12 00:09:20 chain = 0 set freq to 168.75
2023-08-12 00:09:20 chain = 1 set freq to 168.75
2023-08-12 00:09:20 chain = 2 set freq to 168.75
2023-08-12 00:09:20 chain = 0 set freq to 175.00
2023-08-12 00:09:20 chain = 1 set freq to 175.00
2023-08-12 00:09:20 chain = 2 set freq to 175.00
2023-08-12 00:09:20 chain = 0 set freq to 181.25
2023-08-12 00:09:20 chain = 1 set freq to 181.25
2023-08-12 00:09:20 chain = 2 set freq to 181.25
2023-08-12 00:09:21 chain = 0 set freq to 187.50
2023-08-12 00:09:21 chain = 1 set freq to 187.50
2023-08-12 00:09:21 chain = 2 set freq to 187.50
2023-08-12 00:09:21 chain = 0 set freq to 193.75
2023-08-12 00:09:21 chain = 1 set freq to 193.75
2023-08-12 00:09:21 chain = 2 set freq to 193.75
2023-08-12 00:09:21 chain = 0 set freq to 200.00
2023-08-12 00:09:21 chain = 1 set freq to 200.00
2023-08-12 00:09:21 chain = 2 set freq to 200.00
2023-08-12 00:09:22 chain = 0 set freq to 206.25
2023-08-12 00:09:22 chain = 1 set freq to 206.25
2023-08-12 00:09:22 chain = 2 set freq to 206.25
2023-08-12 00:09:22 chain = 0 set freq to 212.50
2023-08-12 00:09:22 chain = 1 set freq to 212.50
2023-08-12 00:09:22 chain = 2 set freq to 212.50
2023-08-12 00:09:22 chain = 0 set freq to 218.75
2023-08-12 00:09:22 chain = 1 set freq to 218.75
2023-08-12 00:09:22 chain = 2 set freq to 218.75
2023-08-12 00:09:23 chain = 0 set freq to 225.00
2023-08-12 00:09:23 chain = 1 set freq to 225.00
2023-08-12 00:09:23 chain = 2 set freq to 225.00
2023-08-12 00:09:23 chain = 0 set freq to 231.25
2023-08-12 00:09:23 chain = 1 set freq to 231.25
2023-08-12 00:09:23 chain = 2 set freq to 231.25
2023-08-12 00:09:23 chain = 0 set freq to 237.50
2023-08-12 00:09:23 chain = 1 set freq to 237.50
2023-08-12 00:09:23 chain = 2 set freq to 237.50
2023-08-12 00:09:23 chain = 0 set freq to 243.75
2023-08-12 00:09:23 chain = 1 set freq to 243.75
2023-08-12 00:09:23 chain = 2 set freq to 243.75
2023-08-12 00:09:24 chain = 0 set freq to 250.00
2023-08-12 00:09:24 chain = 1 set freq to 250.00
2023-08-12 00:09:24 chain = 2 set freq to 250.00
2023-08-12 00:09:24 chain = 0 set freq to 256.25
2023-08-12 00:09:24 chain = 1 set freq to 256.25
2023-08-12 00:09:24 chain = 2 set freq to 256.25
2023-08-12 00:09:24 chain = 0 set freq to 262.50
2023-08-12 00:09:24 chain = 1 set freq to 262.50
2023-08-12 00:09:24 chain = 2 set freq to 262.50
2023-08-12 00:09:25 chain = 0 set freq to 268.75
2023-08-12 00:09:25 chain = 1 set freq to 268.75
2023-08-12 00:09:25 chain = 2 set freq to 268.75
2023-08-12 00:09:25 chain = 0 set freq to 275.00
2023-08-12 00:09:25 chain = 1 set freq to 275.00
2023-08-12 00:09:25 chain = 2 set freq to 275.00
2023-08-12 00:09:25 chain = 0 set freq to 281.25
2023-08-12 00:09:25 chain = 1 set freq to 281.25
2023-08-12 00:09:25 chain = 2 set freq to 281.25
2023-08-12 00:09:26 chain = 0 set freq to 287.50
2023-08-12 00:09:26 chain = 1 set freq to 287.50
2023-08-12 00:09:26 chain = 2 set freq to 287.50
2023-08-12 00:09:26 chain = 0 set freq to 293.75
2023-08-12 00:09:26 chain = 1 set freq to 293.75
2023-08-12 00:09:26 chain = 2 set freq to 293.75
2023-08-12 00:09:26 chain = 0 set freq to 300.00
2023-08-12 00:09:26 chain = 1 set freq to 300.00
2023-08-12 00:09:26 chain = 2 set freq to 300.00
2023-08-12 00:09:27 chain = 0 set freq to 306.25
2023-08-12 00:09:27 chain = 1 set freq to 306.25
2023-08-12 00:09:27 chain = 2 set freq to 306.25
2023-08-12 00:09:27 chain = 0 set freq to 312.50
2023-08-12 00:09:27 chain = 1 set freq to 312.50
2023-08-12 00:09:27 chain = 2 set freq to 312.50
2023-08-12 00:09:27 chain = 0 set freq to 318.75
2023-08-12 00:09:27 chain = 1 set freq to 318.75
2023-08-12 00:09:27 chain = 2 set freq to 318.75
2023-08-12 00:09:27 chain = 0 set freq to 325.00
2023-08-12 00:09:27 chain = 1 set freq to 325.00
2023-08-12 00:09:27 chain = 2 set freq to 325.00
2023-08-12 00:09:28 chain = 0 set freq to 331.25
2023-08-12 00:09:28 chain = 1 set freq to 331.25
2023-08-12 00:09:28 chain = 2 set freq to 331.25
2023-08-12 00:09:28 chain = 0 set freq to 337.50
2023-08-12 00:09:28 chain = 1 set freq to 337.50
2023-08-12 00:09:28 chain = 2 set freq to 337.50
2023-08-12 00:09:28 chain = 0 set freq to 343.75
2023-08-12 00:09:28 chain = 1 set freq to 343.75
2023-08-12 00:09:28 chain = 2 set freq to 343.75
2023-08-12 00:09:29 chain = 0 set freq to 350.00
2023-08-12 00:09:29 chain = 1 set freq to 350.00
2023-08-12 00:09:29 chain = 2 set freq to 350.00
2023-08-12 00:09:29 chain = 0 set freq to 356.25
2023-08-12 00:09:29 chain = 1 set freq to 356.25
2023-08-12 00:09:29 chain = 2 set freq to 356.25
2023-08-12 00:09:29 chain = 0 set freq to 362.50
2023-08-12 00:09:29 chain = 1 set freq to 362.50
2023-08-12 00:09:29 chain = 2 set freq to 362.50
2023-08-12 00:09:30 chain = 0 set freq to 368.75
2023-08-12 00:09:30 chain = 1 set freq to 368.75
2023-08-12 00:09:30 chain = 2 set freq to 368.75
2023-08-12 00:09:30 chain = 0 set freq to 375.00
2023-08-12 00:09:30 chain = 1 set freq to 375.00
2023-08-12 00:09:30 chain = 2 set freq to 375.00
2023-08-12 00:09:30 chain = 0 set freq to 381.25
2023-08-12 00:09:30 chain = 1 set freq to 381.25
2023-08-12 00:09:30 chain = 2 set freq to 381.25
2023-08-12 00:09:30 chain = 0 set freq to 387.50
2023-08-12 00:09:30 chain = 1 set freq to 387.50
2023-08-12 00:09:30 chain = 2 set freq to 387.50
2023-08-12 00:09:31 chain = 0 set freq to 393.75
2023-08-12 00:09:31 chain = 1 set freq to 393.75
2023-08-12 00:09:31 chain = 2 set freq to 393.75
2023-08-12 00:09:31 chain = 0 set freq to 400.00
2023-08-12 00:09:31 chain = 1 set freq to 400.00
2023-08-12 00:09:31 chain = 2 set freq to 400.00
2023-08-12 00:09:31 chain = 0 set freq to 406.25
2023-08-12 00:09:31 chain = 1 set freq to 406.25
2023-08-12 00:09:31 chain = 2 set freq to 406.25
2023-08-12 00:09:32 chain = 0 set freq to 412.50
2023-08-12 00:09:32 chain = 1 set freq to 412.50
2023-08-12 00:09:32 chain = 2 set freq to 412.50
2023-08-12 00:09:32 chain = 0 set freq to 418.75
2023-08-12 00:09:32 chain = 1 set freq to 418.75
2023-08-12 00:09:32 chain = 2 set freq to 418.75
2023-08-12 00:09:32 chain = 0 set freq to 425.00
2023-08-12 00:09:32 chain = 1 set freq to 425.00
2023-08-12 00:09:32 chain = 2 set freq to 425.00
2023-08-12 00:09:33 chain = 0 set freq to 431.25
2023-08-12 00:09:33 chain = 1 set freq to 431.25
2023-08-12 00:09:33 chain = 2 set freq to 431.25
2023-08-12 00:09:33 chain = 0 set freq to 437.50
2023-08-12 00:09:33 chain = 1 set freq to 437.50
2023-08-12 00:09:33 chain = 2 set freq to 437.50
2023-08-12 00:09:33 chain = 0 set freq to 443.75
2023-08-12 00:09:33 chain = 1 set freq to 443.75
2023-08-12 00:09:33 chain = 2 set freq to 443.75
2023-08-12 00:09:34 chain = 0 set freq to 450.00
2023-08-12 00:09:34 chain = 1 set freq to 450.00
2023-08-12 00:09:34 chain = 2 set freq to 450.00
2023-08-12 00:09:34 chain = 0 set freq to 456.25
2023-08-12 00:09:34 chain = 1 set freq to 456.25
2023-08-12 00:09:34 chain = 2 set freq to 456.25
2023-08-12 00:09:34 chain = 0 set freq to 462.50
2023-08-12 00:09:34 chain = 1 set freq to 462.50
2023-08-12 00:09:34 chain = 2 set freq to 462.50
2023-08-12 00:09:34 chain = 0 set freq to 468.75
2023-08-12 00:09:34 chain = 1 set freq to 468.75
2023-08-12 00:09:34 chain = 2 set freq to 468.75
2023-08-12 00:09:35 chain = 0 set freq to 475.00
2023-08-12 00:09:35 chain = 1 set freq to 475.00
2023-08-12 00:09:35 chain = 2 set freq to 475.00
2023-08-12 00:09:35 chain = 0 set freq to 481.25
2023-08-12 00:09:35 chain = 1 set freq to 481.25
2023-08-12 00:09:35 chain = 2 set freq to 481.25
2023-08-12 00:09:35 chain = 0 set freq to 487.50
2023-08-12 00:09:35 chain = 1 set freq to 487.50
2023-08-12 00:09:35 chain = 2 set freq to 487.50
2023-08-12 00:09:36 chain = 0 set freq to 493.75
2023-08-12 00:09:36 chain = 1 set freq to 493.75
2023-08-12 00:09:36 chain = 2 set freq to 493.75
2023-08-12 00:09:36 chain = 0 set freq to 500.00
2023-08-12 00:09:36 chain = 1 set freq to 500.00
2023-08-12 00:09:36 chain = 2 set freq to 500.00
2023-08-12 00:09:36 chain = 0 set freq to 506.25
2023-08-12 00:09:36 chain = 1 set freq to 506.25
2023-08-12 00:09:36 chain = 2 set freq to 506.25
2023-08-12 00:09:37 chain = 0 set freq to 512.50
2023-08-12 00:09:37 chain = 1 set freq to 512.50
2023-08-12 00:09:37 chain = 2 set freq to 512.50
2023-08-12 00:09:37 chain = 0 set freq to 518.75
2023-08-12 00:09:37 chain = 1 set freq to 518.75
2023-08-12 00:09:37 chain = 2 set freq to 518.75
2023-08-12 00:09:37 chain = 0 set freq to 525.00
2023-08-12 00:09:37 chain = 1 set freq to 525.00
2023-08-12 00:09:37 chain = 2 set freq to 525.00
2023-08-12 00:09:37 chain = 0 set freq to 531.25
2023-08-12 00:09:37 chain = 1 set freq to 531.25
2023-08-12 00:09:37 chain = 2 set freq to 531.25
2023-08-12 00:09:38 chain = 0 set freq to 537.50
2023-08-12 00:09:38 chain = 1 set freq to 537.50
2023-08-12 00:09:38 chain = 2 set freq to 537.50
2023-08-12 00:09:38 chain = 0 set freq to 543.75
2023-08-12 00:09:38 chain = 1 set freq to 543.75
2023-08-12 00:09:38 chain = 2 set freq to 543.75
2023-08-12 00:09:38 chain = 0 set freq to 545.00
2023-08-12 00:09:38 chain = 1 set freq to 545.00
2023-08-12 00:09:38 chain = 2 set freq to 545.00
2023-08-12 00:09:39 enter mixed freq cfg
2023-08-12 00:09:39 pulse_mode = 1, ccdly_sel = 0, pwth_sel = 1
2023-08-12 00:09:39 start do_core_reset
2023-08-12 00:10:00 end do_core_reset
2023-08-12 00:10:10 set_voltage_by_steps to 1360.
2023-08-12 00:10:13 Init done!
2023-08-12 00:10:13 STATUS_OKAY
2023-08-12 00:10:13 start the cached job
2023-08-12 00:10:13 Version num 8
2023-08-12 00:10:13 Mask num 0xe000
2023-08-12 00:10:13 freq = 545, percent = 90, hcn = 4809, timeout = 345
2023-08-12 00:10:13 set_start_time_point total_tv_start_sys=218 total_tv_end_sys=219
2023-08-12 00:38:51 30m avg rate is 105743.08 in 28 mins
2023-08-12 01:01:21 iic write failed
2023-08-12 01:01:21 _bitmain_pic_heart_beat_common write iic err
2023-08-12 01:01:25 iic write failed
2023-08-12 01:01:25 _read_an6_voltage write iic err
2023-08-12 01:01:26 chain avg vol drop to 9.30
2023-08-12 01:01:26 Sweep error string = V:1.
2023-08-12 01:01:26 ERROR_POWER_LOST: pic check voltage drop
2023-08-12 01:01:26 stop_mining: pic check voltage drop
2023-08-12 01:01:26 uninit_temp_info
2023-08-12 01:01:26 do not read temp anymore...
2023-08-12 01:01:26 cancel thread
2023-08-12 01:01:26 cancel thread
2023-08-12 01:01:26 ****power off hashboard****
2023-08-12 01:01:27 temp monitor thread exit
2023-08-12 01:01:30 iic write failed
2023-08-12 01:01:30 _bitmain_pic_disable_dc_dc_common write iic err
2023-08-12 01:01:36 iic write failed
2023-08-12 01:01:36 _read_an6_voltage write iic err
2023-08-12 01:01:40 iic write failed
2023-08-12 01:01:40 _read_an6_voltage write iic err
2023-08-12 01:01:44 iic write failed
2023-08-12 01:01:44 _read_an6_voltage write iic err
2023-08-12 01:01:47 iic write failed
2023-08-12 01:01:47 _read_an6_voltage write iic err
2023-08-12 01:01:51 iic write failed
2023-08-12 01:01:51 _read_an6_voltage write iic err
2023-08-12 01:01:55 iic write failed
2023-08-12 01:01:55 _read_an6_voltage write iic err
2023-08-12 01:01:59 iic write failed
2023-08-12 01:01:59 _read_an6_voltage write iic err
2023-08-12 01:02:02 iic write failed
2023-08-12 01:02:02 _read_an6_voltage write iic err
2023-08-12 01:02:06 iic write failed
2023-08-12 01:02:06 _read_an6_voltage write iic err
2023-08-12 01:02:10 iic write failed
2023-08-12 01:02:10 _read_an6_voltage write iic err
2023-08-12 01:02:13 iic write failed
2023-08-12 01:02:13 _bitmain_pic_heart_beat_common write iic err
2023-08-12 01:02:17 iic write failed
2023-08-12 01:02:17 _read_an6_voltage write iic err
2023-08-12 01:02:21 iic write failed
2023-08-12 01:02:21 _read_an6_voltage write iic err
2023-08-12 01:02:24 iic write failed
2023-08-12 01:02:24 _read_an6_voltage write iic err
2023-08-12 01:02:28 iic write failed
2023-08-12 01:02:28 _read_an6_voltage write iic err
2023-08-12 01:02:32 iic write failed
2023-08-12 01:02:32 _read_an6_voltage write iic err
2023-08-12 01:02:35 iic write failed
2023-08-12 01:02:35 _read_an6_voltage write iic err
2023-08-12 01:02:39 iic write failed
2023-08-12 01:02:39 _read_an6_voltage write iic err
2023-08-12 01:02:43 iic write failed
2023-08-12 01:02:43 _read_an6_voltage write iic err
2023-08-12 01:02:46 iic write failed
2023-08-12 01:02:46 _read_an6_voltage write iic err
2023-08-12 01:02:50 iic write failed
2023-08-12 01:02:50 _read_an6_voltage write iic err
2023-08-12 01:02:54 iic write failed
2023-08-12 01:02:54 _read_an6_voltage write iic err
2023-08-12 01:02:58 iic write failed
2023-08-12 01:02:58 _bitmain_pic_heart_beat_common write iic err
2023-08-12 01:03:01 iic write failed
2023-08-12 01:03:01 _read_an6_voltage write iic err
2023-08-12 01:03:05 iic write failed
2023-08-12 01:03:05 _read_an6_voltage write iic err
2023-08-12 01:03:08 iic write failed
2023-08-12 01:03:08 _read_an6_voltage write iic err
2023-08-12 01:03:12 iic write failed
2023-08-12 01:03:12 _read_an6_voltage write iic err
2023-08-12 01:03:16 iic write failed
2023-08-12 01:03:16 _read_an6_voltage write iic err
2023-08-12 01:03:19 iic write failed
2023-08-12 01:03:19 _read_an6_voltage write iic err
2023-08-12 01:03:23 iic write failed
2023-08-12 01:03:23 _read_an6_voltage write iic err
2023-08-12 01:03:27 iic write failed
2023-08-12 01:03:27 _read_an6_voltage write iic err
2023-08-12 01:03:31 iic write failed
2023-08-12 01:03:31 _read_an6_voltage write iic err
2023-08-12 01:03:34 iic write failed
2023-08-12 01:03:34 _read_an6_voltage write iic err
2023-08-12 01:03:38 iic write failed
2023-08-12 01:03:38 _read_an6_voltage write iic err
2023-08-12 01:03:42 iic write failed
2023-08-12 01:03:42 _bitmain_pic_heart_beat_common write iic err
2023-08-12 01:03:45 iic write failed
2023-08-12 01:03:45 _read_an6_voltage write iic err
2023-08-12 01:03:49 iic write failed
2023-08-12 01:03:49 _read_an6_voltage write iic err
2023-08-12 01:03:52 iic write failed
2023-08-12 01:03:52 _read_an6_voltage write iic err
2023-08-12 01:03:56 iic write failed
2023-08-12 01:03:56 _read_an6_voltage write iic err
2023-08-12 01:04:00 iic write failed
2023-08-12 01:04:00 _read_an6_voltage write iic err
2023-08-12 01:04:04 iic write failed
2023-08-12 01:04:04 _read_an6_voltage write iic err
2023-08-12 01:04:07 iic write failed
2023-08-12 01:04:07 _read_an6_voltage write iic err
2023-08-12 01:04:11 iic write failed
2023-08-12 01:04:11 _read_an6_voltage write iic err
2023-08-12 01:04:15 iic write failed
2023-08-12 01:04:15 _read_an6_voltage write iic err
2023-08-12 01:04:18 iic write failed
2023-08-12 01:04:18 _read_an6_voltage write iic err
2023-08-12 01:04:22 iic write failed
2023-08-12 01:04:22 _read_an6_voltage write iic err
2023-08-12 01:04:26 iic write failed
2023-08-12 01:04:26 _bitmain_pic_heart_beat_common write iic err
2023-08-12 01:08:53 30m avg rate is 79613.31 in 30 mins
2023-08-12 01:08:53 chain 0 hash rate 17825.00 low in 15 mins
2023-08-12 01:08:53 chain 1 hash rate 17677.00 low in 15 mins
2023-08-12 01:08:53 chain 2 hash rate 17837.00 low in 15 mins
2023-08-12 01:23:53 chain 0 hash rate 0.00 low in 15 mins
2023-08-12 01:23:53 chain 1 hash rate 0.00 low in 15 mins
2023-08-12 01:23:53 chain 2 hash rate 0.00 low in 15 mins
2023-08-12 01:38:54 avg rate is lower than ideal rate, 0.00 in 30 mins
2023-08-12 01:38:54 30m avg rate is 0.00 in 30 mins
2023-08-12 01:39:41 iic write failed
2023-08-12 01:39:41 _bitmain_pic_heart_beat_common write iic err
2023-08-12 01:39:44 iic write failed
2023-08-12 01:39:44 _read_an6_voltage write iic err
2023-08-12 01:39:48 iic write failed
2023-08-12 01:39:48 _read_an6_voltage write iic err
2023-08-12 01:39:51 iic write failed
2023-08-12 01:39:51 _read_an6_voltage write iic err
2023-08-12 01:39:55 iic write failed
2023-08-12 01:39:55 _read_an6_voltage write iic err
2023-08-12 01:39:59 iic write failed
2023-08-12 01:39:59 _read_an6_voltage write iic err
2023-08-12 01:40:02 iic write failed
2023-08-12 01:40:02 _read_an6_voltage write iic err
2023-08-12 01:40:06 iic write failed
2023-08-12 01:40:06 _read_an6_voltage write iic err
2023-08-12 01:40:10 iic write failed
2023-08-12 01:40:10 _read_an6_voltage write iic err
2023-08-12 01:40:14 iic write failed
2023-08-12 01:40:14 _read_an6_voltage write iic err
2023-08-12 01:40:17 iic write failed
2023-08-12 01:40:17 _read_an6_voltage write iic err
2023-08-12 01:40:21 iic write failed
2023-08-12 01:40:21 _read_an6_voltage write iic err
2023-08-12 01:40:25 iic write failed
2023-08-12 01:40:25 _bitmain_pic_heart_beat_common write iic err
2023-08-12 01:40:28 iic write failed
2023-08-12 01:40:28 _read_an6_voltage write iic err
2023-08-12 01:40:32 iic write failed
2023-08-12 01:40:32 _read_an6_voltage write iic err
2023-08-12 01:40:35 iic write failed
2023-08-12 01:40:35 _read_an6_voltage write iic err
2023-08-12 01:40:39 iic write failed
2023-08-12 01:40:39 _read_an6_voltage write iic err
2023-08-12 01:42:01 iic write failed
2023-08-12 01:42:01 _read_an6_voltage write iic err
2023-08-12 01:42:05 iic write failed
2023-08-12 01:42:05 _read_an6_voltage write iic err
2023-08-12 01:42:08 iic write failed
2023-08-12 01:42:08 _read_an6_voltage write iic err
2023-08-12 01:42:12 iic write failed
2023-08-12 01:42:12 _read_an6_voltage write iic err
2023-08-12 01:44:17 iic write failed
2023-08-12 01:44:17 _read_an6_voltage write iic err
2023-08-12 01:44:21 iic write failed
2023-08-12 01:44:21 _read_an6_voltage write iic err
2023-08-12 01:44:25 iic write failed
2023-08-12 01:44:25 _bitmain_pic_heart_beat_common write iic err
2023-08-12 01:44:28 iic write failed
2023-08-12 01:44:28 _read_an6_voltage write iic err
-
After factory reset
Preemptible hierarchical RCU implementation. Build-time adjustment of leaf fanout to 32. RCU restricting CPUs from NR_CPUS=4 to nr_cpu_ids=2. RCU: Adjusting geometry for rcu_fanout_leaf=32, nr_cpu_ids=2 NR_IRQS:16 nr_irqs:16 16 efuse mapped to cf800000 ps7-slcr mapped to cf802000 L2C: platform modifies aux control register: 0x72360000 -> 0x72760000 L2C: DT/platform modifies aux control register: 0x72360000 -> 0x72760000 L2C-310 erratum 769419 enabled L2C-310 enabling early BRESP for Cortex-A9 L2C-310 full line of zeros enabled for Cortex-A9 L2C-310 ID prefetch enabled, offset 1 lines L2C-310 dynamic clock gating enabled, standby mode enabled L2C-310 cache controller enabled, 8 ways, 512 kB L2C-310: CACHE_ID 0x410000c8, AUX_CTRL 0x76760001 zynq_clock_init: clkc starts at cf802100 Zynq clock init sched_clock: 64 bits at 333MHz, resolution 3ns, wraps every 4398046511103ns clocksource: arm_global_timer: mask: 0xffffffffffffffff max_cycles: 0x4ce07af025, max_idle_ns: 440795209040 ns Switching to timer-based delay loop, resolution 3ns clocksource: ttc_clocksource: mask: 0xffff max_cycles: 0xffff, max_idle_ns: 537538477 ns ps7-ttc #0 at cf80a000, irq=18 Console: colour dummy device 80x30 Calibrating delay loop (skipped), value calculated using timer frequency.. 666.66 BogoMIPS (lpj=3333333) pid_max: default: 32768 minimum: 301 Mount-cache hash table entries: 1024 (order: 0, 4096 bytes) Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes) CPU: Testing write buffer coherency: ok CPU0: thread -1, cpu 0, socket 0, mpidr 80000000 Setting up static identity map for 0x100000 - 0x100058 CPU1: failed to boot: -1 Brought up 1 CPUs SMP: Total of 1 processors activated (666.66 BogoMIPS). CPU: All CPU(s) started in SVC mode. devtmpfs: initialized VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 4 clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns pinctrl core: initialized pinctrl subsystem NET: Registered protocol family 16 DMA: preallocated 256 KiB pool for atomic coherent allocations cpuidle: using governor menu hw-breakpoint: found 5 (+1 reserved) breakpoint and 1 watchpoint registers. hw-breakpoint: maximum watchpoint size is 4 bytes. zynq-ocm f800c000.ps7-ocmc: ZYNQ OCM pool: 256 KiB @ 0xcf880000 vgaarb: loaded SCSI subsystem initialized usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb media: Linux media interface: v0.10 Linux video capture interface: v2.00 pps_core: LinuxPPS API ver. 1 registered pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it> PTP clock support registered EDAC MC: Ver: 3.0.0 Advanced Linux Sound Architecture Driver Initialized. clocksource: Switched to clocksource arm_global_timer NET: Registered protocol family 2 TCP established hash table entries: 2048 (order: 1, 8192 bytes) TCP bind hash table entries: 2048 (order: 2, 16384 bytes) TCP: Hash tables configured (established 2048 bind 2048) UDP hash table entries: 256 (order: 1, 8192 bytes) UDP-Lite hash table entries: 256 (order: 1, 8192 bytes) NET: Registered protocol family 1 RPC: Registered named UNIX socket transport module. RPC: Registered udp transport module. RPC: Registered tcp transport module. RPC: Registered tcp NFSv4.1 backchannel transport module. PCI: CLS 0 bytes, default 64 Trying to unpack rootfs image as initramfs... rootfs image is not initramfs (no cpio magic); looks like an initrd Freeing initrd memory: 6716K (cd46b000 - cdafa000) hw perfevents: enabled with armv7_cortex_a9 PMU driver, 7 counters available futex hash table entries: 512 (order: 3, 32768 bytes) workingset: timestamp_bits=28 max_order=16 bucket_order=0 jffs2: version 2.2. (NAND) (SUMMARY) © 2001-2006 Red Hat, Inc. io scheduler noop registered io scheduler deadline registered io scheduler cfq registered (default) dma-pl330 f8003000.ps7-dma: Loaded driver for PL330 DMAC-241330 dma-pl330 f8003000.ps7-dma: DBUFF-128x8bytes Num_Chans-8 Num_Peri-4 Num_Events-16 e0000000.serial: ttyPS0 at MMIO 0xe0000000 (irq = 159, base_baud = 6249999) is a xuartps console [ttyPS0] enabled xdevcfg f8007000.ps7-dev-cfg: ioremap 0xf8007000 to cf86e000 [drm] Initialized drm 1.1.0 20060810 brd: module loaded loop: module loaded CAN device driver interface gpiod_set_value: invalid GPIO libphy: MACB_mii_bus: probed macb e000b000.ethernet eth0: Cadence GEM rev 0x00020118 at 0xe000b000 irq 31 (00:0a:35:00:00:00) Generic PHY e000b000.etherne:00: attached PHY driver [Generic PHY] (mii_bus:phy_addr=e000b000.etherne:00, irq=-1) e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k e1000e: Copyright(c) 1999 - 2015 Intel Corporation. ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver ehci-pci: EHCI PCI platform driver usbcore: registered new interface driver usb-storage mousedev: PS/2 mouse device common for all mice i2c /dev entries driver cdns-i2c e0005000.ps7_i2c: 100 kHz mmio e0005000 irq 154 Xilinx Zynq CpuIdle Driver started sdhci: Secure Digital Host Controller Interface driver sdhci: Copyright(c) Pierre Ossman sdhci-pltfm: SDHCI platform and OF driver helper mmc0: SDHCI controller on e0100000.ps7-sdio [e0100000.ps7-sdio] using ADMA ledtrig-cpu: registered to indicate activity on CPUs usbcore: registered new interface driver usbhid usbhid: USB HID core driver nand: disable subpage write nand: device found, Manufacturer ID: 0x2c, Chip ID: 0xda nand: Micron MT29F2G08ABAEAWP nand: 256 MiB, SLC, erase size: 128 KiB, page size: 2048, OOB size: 64 nand: NAND_ECC_HW nand: NAND_ECC_HW_SYNDROME mtd->writesize = 2048 ecc->strength = 1 ecc->size = 2048 mtd->writesize = 2048 chip->ecc_strength_ds = 4 chip->ecc_step_ds = 512 nand: WARNING: pl35x-nand: the ECC used on your system is too weak compared to the one required by the NAND chip Bad block table found at page 131008, version 0x01 Bad block table found at page 130944, version 0x01 8 ofpart partitions found on MTD device pl35x-nand Creating 8 MTD partitions on "pl35x-nand": 0x000000000000-0x000002800000 : "BOOT.bin-dts-marker-kernel" 0x000002800000-0x000004800000 : "ramfs" 0x000004800000-0x000005000000 : "configs" 0x000005000000-0x000005200000 : "sig" 0x000005200000-0x000006000000 : "reserve1" 0x000006000000-0x000007000000 : "upgrade-ramfs" 0x000007000000-0x00000a800000 : "upgrade-file" 0x00000a800000-0x000010000000 : "reserve2" nf_conntrack version 0.5.0 (3635 buckets, 14540 max) ip_tables: (C) 2000-2006 Netfilter Core Team NET: Registered protocol family 10 ip6_tables: (C) 2000-2006 Netfilter Core Team sit: IPv6 over IPv4 tunneling driver NET: Registered protocol family 17 can: controller area network core (rev 20120528 abi 9) NET: Registered protocol family 29 can: raw protocol (rev 20120528) can: broadcast manager protocol (rev 20120528 t) can: netlink gateway (rev 20130117) max_hops=1 zynq_pm_ioremap: no compatible node found for 'xlnx,zynq-ddrc-a05' zynq_pm_late_init: Unable to map DDRC IO memory. Registering SWP/SWPB emulation handler hctosys: unable to open rtc device (rtc0) ALSA device list: No soundcards found. RAMDISK: gzip image found at block 0 EXT4-fs (ram0): couldn't mount as ext3 due to feature incompatibilities EXT4-fs warning (device ram0): ext4_update_dynamic_rev:746: updating to rev 1 because of new feature flag, running e2fsck is recommended EXT4-fs (ram0): mounted filesystem without journal. Opts: (null) VFS: Mounted root (ext4 filesystem) on device 1:0. devtmpfs: mounted Freeing unused kernel memory: 1024K (c0a00000 - c0b00000) EXT4-fs (ram0): re-mounted. Opts: block_validity,delalloc,barrier,user_xattr,errors=remount-ro devpts: called with bogus options ubi0: attaching mtd2 ubi0: scanning is finished ubi0: attached mtd2 (name "configs", size 8 MiB) ubi0: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes ubi0: min./max. I/O unit sizes: 2048/2048, sub-page size 2048 ubi0: VID header offset: 2048 (aligned 2048), data offset: 4096 ubi0: good PEBs: 64, bad PEBs: 0, corrupted PEBs: 0 ubi0: user volume: 1, internal volumes: 1, max. volumes count: 128 ubi0: max/mean erase counter: 6/2, WL threshold: 4096, image sequence number: 789964903 ubi0: available PEBs: 0, total reserved PEBs: 64, PEBs reserved for bad PEB handling: 4 ubi0: background thread "ubi_bgt0d" started, PID 729 UBIFS (ubi0:0): background thread "ubifs_bgt0_0" started, PID 733 UBIFS (ubi0:0): recovery needed UBIFS (ubi0:0): recovery completed UBIFS (ubi0:0): UBIFS: mounted UBI device 0, volume 0, name "config_data" UBIFS (ubi0:0): LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes UBIFS (ubi0:0): FS size: 5840896 bytes (5 MiB, 46 LEBs), journal size 1015809 bytes (0 MiB, 6 LEBs) UBIFS (ubi0:0): reserved for root: 275879 bytes (269 KiB) UBIFS (ubi0:0): media format: w4/r0 (latest is w4/r0), UUID 86712FAB-76C3-4506-9848-2314BE6E1E0C, small LPT model ubi2: attaching mtd4 ubi2: scanning is finished ubi2: attached mtd4 (name "reserve1", size 14 MiB) ubi2: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes ubi2: min./max. I/O unit sizes: 2048/2048, sub-page size 2048 ubi2: VID header offset: 2048 (aligned 2048), data offset: 4096 ubi2: good PEBs: 112, bad PEBs: 0, corrupted PEBs: 0 ubi2: user volume: 1, internal volumes: 1, max. volumes count: 128 ubi2: max/mean erase counter: 7/3, WL threshold: 4096, image sequence number: 1928558007 ubi2: available PEBs: 0, total reserved PEBs: 112, PEBs reserved for bad PEB handling: 4 ubi2: background thread "ubi_bgt2d" started, PID 740 UBIFS (ubi2:0): background thread "ubifs_bgt2_0" started, PID 744 UBIFS (ubi2:0): recovery needed UBIFS (ubi2:0): recovery completed UBIFS (ubi2:0): UBIFS: mounted UBI device 2, volume 0, name "misc" UBIFS (ubi2:0): LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes UBIFS (ubi2:0): FS size: 11935744 bytes (11 MiB, 94 LEBs), journal size 1015809 bytes (0 MiB, 6 LEBs) UBIFS (ubi2:0): reserved for root: 563754 bytes (550 KiB) UBIFS (ubi2:0): media format: w4/r0 (latest is w4/r0), UUID 75A013EE-AFBD-462A-9F32-8C6E11AEDBA8, small LPT model ubi3: attaching mtd7 ubi3: scanning is finished ubi3: attached mtd7 (name "reserve2", size 88 MiB) ubi3: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes ubi3: min./max. I/O unit sizes: 2048/2048, sub-page size 2048 ubi3: VID header offset: 2048 (aligned 2048), data offset: 4096 ubi3: good PEBs: 700, bad PEBs: 4, corrupted PEBs: 0 ubi3: user volume: 1, internal volumes: 1, max. volumes count: 128 ubi3: max/mean erase counter: 9/2, WL threshold: 4096, image sequence number: 925685099 ubi3: available PEBs: 0, total reserved PEBs: 700, PEBs reserved for bad PEB handling: 0 ubi3: background thread "ubi_bgt3d" started, PID 751 UBIFS (ubi3:0): background thread "ubifs_bgt3_0" started, PID 755 UBIFS (ubi3:0): recovery needed UBIFS (ubi3:0): recovery completed UBIFS (ubi3:0): UBIFS: mounted UBI device 3, volume 0, name "nvdada_log" UBIFS (ubi3:0): LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes UBIFS (ubi3:0): FS size: 86978560 bytes (82 MiB, 685 LEBs), journal size 4317184 bytes (4 MiB, 34 LEBs) UBIFS (ubi3:0): reserved for root: 4108212 bytes (4011 KiB) UBIFS (ubi3:0): media format: w4/r0 (latest is w4/r0), UUID 2FC8A882-1161-453C-A86F-9E613FDBD746, small LPT model IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready random: avahi-daemon urandom read with 2 bits of entropy available macb e000b000.ethernet eth0: unable to generate target frequency: 25000000 Hz macb e000b000.ethernet eth0: link up (100/Full) IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready In axi fpga driver! request_mem_region OK! AXI fpga dev virtual address is 0xcfc7c000 *base_vir_addr = 0xb042 In fpga mem driver! request_mem_region OK! fpga mem virtual address is 0xd2000000 random: nonblocking pool is initialized ===========================================Miner log=========================================== 1970-01-01 00:00:10 Open miner sn file /config/sn error 1970-01-01 00:00:10 Miner compile time: Mon Dec 26 17:09:26 CST 2022 type: Antminer BHB42XXX sn : 1970-01-01 00:00:11 This is fix-freq version 1970-01-01 00:00:11 Miner compile time: Mon Dec 26 17:09:26 CST 2022 type: Antminer BHB42XXX 1970-01-01 00:00:11 commit version: f2ab6bc 2022-12-26 17:08:34, build by: jenkins 2022-12-26 17:09:25 1970-01-01 00:00:11 opt_multi_version = 1 1970-01-01 00:00:11 opt_bitmain_ab = 1 1970-01-01 00:00:11 mid_auto_gen = 0 1970-01-01 00:00:11 opt_bitmain_work_mode = 0 1970-01-01 00:00:11 mmap fpga_mem_addr_hal = 0xb5800000 1970-01-01 00:00:11 HASH_ON_PLUG V9 = 0x7 1970-01-01 00:00:11 Note: front fan is power on! 1970-01-01 00:00:11 Note: rear fan is power on! 1970-01-01 00:00:11 start the http log. 1970-01-01 00:00:11 httpListenThread start ret=0 1970-01-01 00:00:11 start listen on 6060 ... 1970-01-01 00:00:17 miner ID : 811c2d801c20881c 1970-01-01 00:00:17 FPGA Version = 0xB042 1970-01-01 00:00:17 HASH_ON_PLUG V9 = 0x7 1970-01-01 00:00:17 ==========================capability start========================== 1970-01-01 00:00:17 board num = 3 1970-01-01 00:00:17 board id = 0, chain num = 1 1970-01-01 00:00:17 chain id = 0 1970-01-01 00:00:17 board id = 1, chain num = 1 1970-01-01 00:00:17 chain id = 1 1970-01-01 00:00:17 board id = 2, chain num = 1 1970-01-01 00:00:17 chain id = 2 1970-01-01 00:00:17 ==========================capability end============================ 1970-01-01 00:00:17 chain num = 3 1970-01-01 00:00:17 skip loading levels for now 2023-08-12 02:34:45 fail to read eeprom by iic, chain: 0, addr: 0 2023-08-12 02:34:45 Read configuration fail for chain 0. 2023-08-12 02:34:52 load chain 1 eeprom data 2023-08-12 02:34:59 load chain 2 eeprom data 2023-08-12 02:34:59 Sweep error string = J1:4. 2023-08-12 02:34:59 Fixture data load failed, exit. 2023-08-12 02:34:59 get board name failed for chain:0 2023-08-12 02:34:59 ERROR_SOC_INIT: basic init failed! 2023-08-12 02:34:59 stop_mining: basic init failed! 2023-08-12 02:34:59 ****power off hashboard**** 2023-08-12 02:35:03 iic write failed 2023-08-12 02:35:03 _bitmain_pic_disable_dc_dc_common write iic err
-
Dear customer.
From the kernel log,it shows PIC issue
please kindly exclude the issue by following steps:1.Check the wires for the hashboard--pull them and re-plug them again, and also you can try to change the new wires.
2.Please clean up the dust.
How To Clean and Dust The Antminers
https://support.bitmain.com/hc/en-us/articles/115004520173-How-To-Clean-and-Dust-The-Antminers
3.Test for PSU failure
https://support.bitmain.com/hc/en-us/articles/115004339274--How-to-use-a-multimeter-to-test-PSU
If there are still the same problems after the above steps, please send it to repair.
Best regards
BITMAIN
-
Dear Customer,
If you have any questions please feel free to contact us.
Please send email to customersupport@bitmain.com
We will reply to your question as soon as possible.
-
Good morning
The log shows that the voltage output of the PSU is unstable
Need to troubleshoot PSU
If you need help,you can contact me, this is my number
Zeus Mining
https://www.zeusbtc.com/?nocheck=Vrq5Aj9U
-
Dear Customer,
If you have any questions please feel free to contact us.
Please send email to customersupport@bitmain.com
We will reply to your question as soon as possible.
Please sign in to leave a comment.
Comments
5 comments