S19 Pro hash boards abnormal

Running latest firmware.  I have factory reset multiple times and rebooted.  Not to sure what is wrong with it.

Miner log:

Preemptible hierarchical RCU implementation.
	Build-time adjustment of leaf fanout to 32.
	RCU restricting CPUs from NR_CPUS=4 to nr_cpu_ids=2.
RCU: Adjusting geometry for rcu_fanout_leaf=32, nr_cpu_ids=2
NR_IRQS:16 nr_irqs:16 16
efuse mapped to cf800000
ps7-slcr mapped to cf802000
L2C: platform modifies aux control register: 0x72360000 -> 0x72760000
L2C: DT/platform modifies aux control register: 0x72360000 -> 0x72760000
L2C-310 erratum 769419 enabled
L2C-310 enabling early BRESP for Cortex-A9
L2C-310 full line of zeros enabled for Cortex-A9
L2C-310 ID prefetch enabled, offset 1 lines
L2C-310 dynamic clock gating enabled, standby mode enabled
L2C-310 cache controller enabled, 8 ways, 512 kB
L2C-310: CACHE_ID 0x410000c8, AUX_CTRL 0x76760001
zynq_clock_init: clkc starts at cf802100
Zynq clock init
sched_clock: 64 bits at 333MHz, resolution 3ns, wraps every 4398046511103ns
clocksource: arm_global_timer: mask: 0xffffffffffffffff max_cycles: 0x4ce07af025, max_idle_ns: 440795209040 ns
Switching to timer-based delay loop, resolution 3ns
clocksource: ttc_clocksource: mask: 0xffff max_cycles: 0xffff, max_idle_ns: 537538477 ns
ps7-ttc #0 at cf80a000, irq=18
Console: colour dummy device 80x30
Calibrating delay loop (skipped), value calculated using timer frequency.. 666.66 BogoMIPS (lpj=3333333)
pid_max: default: 32768 minimum: 301
Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
CPU: Testing write buffer coherency: ok
CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
Setting up static identity map for 0x100000 - 0x100058
CPU1: failed to boot: -1
Brought up 1 CPUs
SMP: Total of 1 processors activated (666.66 BogoMIPS).
CPU: All CPU(s) started in SVC mode.
devtmpfs: initialized
VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 4
clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
pinctrl core: initialized pinctrl subsystem
NET: Registered protocol family 16
DMA: preallocated 256 KiB pool for atomic coherent allocations
cpuidle: using governor menu
hw-breakpoint: found 5 (+1 reserved) breakpoint and 1 watchpoint registers.
hw-breakpoint: maximum watchpoint size is 4 bytes.
zynq-ocm f800c000.ps7-ocmc: ZYNQ OCM pool: 256 KiB @ 0xcf880000
vgaarb: loaded
SCSI subsystem initialized
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
media: Linux media interface: v0.10
Linux video capture interface: v2.00
pps_core: LinuxPPS API ver. 1 registered
pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
PTP clock support registered
EDAC MC: Ver: 3.0.0
Advanced Linux Sound Architecture Driver Initialized.
clocksource: Switched to clocksource arm_global_timer
NET: Registered protocol family 2
TCP established hash table entries: 2048 (order: 1, 8192 bytes)
TCP bind hash table entries: 2048 (order: 2, 16384 bytes)
TCP: Hash tables configured (established 2048 bind 2048)
UDP hash table entries: 256 (order: 1, 8192 bytes)
UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
NET: Registered protocol family 1
RPC: Registered named UNIX socket transport module.
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
RPC: Registered tcp NFSv4.1 backchannel transport module.
PCI: CLS 0 bytes, default 64
Trying to unpack rootfs image as initramfs...
rootfs image is not initramfs (no cpio magic); looks like an initrd
Freeing initrd memory: 6668K (cd476000 - cdaf9000)
hw perfevents: enabled with armv7_cortex_a9 PMU driver, 7 counters available
futex hash table entries: 512 (order: 3, 32768 bytes)
workingset: timestamp_bits=28 max_order=16 bucket_order=0
jffs2: version 2.2. (NAND) (SUMMARY)  © 2001-2006 Red Hat, Inc.
io scheduler noop registered
io scheduler deadline registered
io scheduler cfq registered (default)
dma-pl330 f8003000.ps7-dma: Loaded driver for PL330 DMAC-241330
dma-pl330 f8003000.ps7-dma: 	DBUFF-128x8bytes Num_Chans-8 Num_Peri-4 Num_Events-16
e0000000.serial: ttyPS0 at MMIO 0xe0000000 (irq = 159, base_baud = 6249999) is a xuartps
console [ttyPS0] enabled
xdevcfg f8007000.ps7-dev-cfg: ioremap 0xf8007000 to cf86e000
[drm] Initialized drm 1.1.0 20060810
brd: module loaded
loop: module loaded
CAN device driver interface
gpiod_set_value: invalid GPIO
libphy: MACB_mii_bus: probed
macb e000b000.ethernet eth0: Cadence GEM rev 0x00020118 at 0xe000b000 irq 31 (00:0a:35:00:00:00)
Generic PHY e000b000.etherne:00: attached PHY driver [Generic PHY] (mii_bus:phy_addr=e000b000.etherne:00, irq=-1)
e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k
e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci-pci: EHCI PCI platform driver
usbcore: registered new interface driver usb-storage
mousedev: PS/2 mouse device common for all mice
i2c /dev entries driver
cdns-i2c e0005000.ps7_i2c: 100 kHz mmio e0005000 irq 154
Xilinx Zynq CpuIdle Driver started
sdhci: Secure Digital Host Controller Interface driver
sdhci: Copyright(c) Pierre Ossman
sdhci-pltfm: SDHCI platform and OF driver helper
mmc0: SDHCI controller on e0100000.ps7-sdio [e0100000.ps7-sdio] using ADMA
ledtrig-cpu: registered to indicate activity on CPUs
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
nand: disable subpage write
nand: device found, Manufacturer ID: 0x2c, Chip ID: 0xda
nand: Micron MT29F2G08ABAEAWP
nand: 256 MiB, SLC, erase size: 128 KiB, page size: 2048, OOB size: 64
nand: NAND_ECC_HW
nand: NAND_ECC_HW_SYNDROME
mtd->writesize = 2048
ecc->strength = 1
ecc->size = 2048
mtd->writesize = 2048
chip->ecc_strength_ds = 4
chip->ecc_step_ds = 512
nand: WARNING: pl35x-nand: the ECC used on your system is too weak compared to the one required by the NAND chip
Bad block table found at page 131008, version 0x01
Bad block table found at page 130944, version 0x01
8 ofpart partitions found on MTD device pl35x-nand
Creating 8 MTD partitions on "pl35x-nand":
0x000000000000-0x000002800000 : "BOOT.bin-dts-marker-kernel"
0x000002800000-0x000004800000 : "ramfs"
0x000004800000-0x000005000000 : "configs"
0x000005000000-0x000005200000 : "sig"
0x000005200000-0x000006000000 : "reserve1"
0x000006000000-0x000007000000 : "upgrade-ramfs"
0x000007000000-0x00000a800000 : "upgrade-file"
0x00000a800000-0x000010000000 : "reserve2"
nf_conntrack version 0.5.0 (3635 buckets, 14540 max)
ip_tables: (C) 2000-2006 Netfilter Core Team
NET: Registered protocol family 10
ip6_tables: (C) 2000-2006 Netfilter Core Team
sit: IPv6 over IPv4 tunneling driver
NET: Registered protocol family 17
can: controller area network core (rev 20120528 abi 9)
NET: Registered protocol family 29
can: raw protocol (rev 20120528)
can: broadcast manager protocol (rev 20120528 t)
can: netlink gateway (rev 20130117) max_hops=1
zynq_pm_ioremap: no compatible node found for 'xlnx,zynq-ddrc-a05'
zynq_pm_late_init: Unable to map DDRC IO memory.
Registering SWP/SWPB emulation handler
hctosys: unable to open rtc device (rtc0)
ALSA device list:
  No soundcards found.
RAMDISK: gzip image found at block 0
EXT4-fs (ram0): couldn't mount as ext3 due to feature incompatibilities
EXT4-fs warning (device ram0): ext4_update_dynamic_rev:746: updating to rev 1 because of new feature flag, running e2fsck is recommended
EXT4-fs (ram0): mounted filesystem without journal. Opts: (null)
VFS: Mounted root (ext4 filesystem) on device 1:0.
devtmpfs: mounted
Freeing unused kernel memory: 1024K (c0a00000 - c0b00000)
EXT4-fs (ram0): re-mounted. Opts: block_validity,delalloc,barrier,user_xattr,errors=remount-ro
devpts: called with bogus options
ubi0: attaching mtd2
ubi0: scanning is finished
ubi0: attached mtd2 (name "configs", size 8 MiB)
ubi0: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes
ubi0: min./max. I/O unit sizes: 2048/2048, sub-page size 2048
ubi0: VID header offset: 2048 (aligned 2048), data offset: 4096
ubi0: good PEBs: 64, bad PEBs: 0, corrupted PEBs: 0
ubi0: user volume: 1, internal volumes: 1, max. volumes count: 128
ubi0: max/mean erase counter: 14/6, WL threshold: 4096, image sequence number: 262741923
ubi0: available PEBs: 36, total reserved PEBs: 28, PEBs reserved for bad PEB handling: 4
ubi0: background thread "ubi_bgt0d" started, PID 729
UBIFS (ubi0:0): background thread "ubifs_bgt0_0" started, PID 733
UBIFS (ubi0:0): UBIFS: mounted UBI device 0, volume 0, name "configs"
UBIFS (ubi0:0): LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
UBIFS (ubi0:0): FS size: 1396736 bytes (1 MiB, 11 LEBs), journal size 888833 bytes (0 MiB, 5 LEBs)
UBIFS (ubi0:0): reserved for root: 65970 bytes (64 KiB)
UBIFS (ubi0:0): media format: w4/r0 (latest is w4/r0), UUID A9E8BDA4-70DE-45D9-83BE-2DD9F129C0C6, small LPT model
ubi2: attaching mtd4
ubi2: scanning is finished
ubi2: attached mtd4 (name "reserve1", size 14 MiB)
ubi2: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes
ubi2: min./max. I/O unit sizes: 2048/2048, sub-page size 2048
ubi2: VID header offset: 2048 (aligned 2048), data offset: 4096
ubi2: good PEBs: 112, bad PEBs: 0, corrupted PEBs: 0
ubi2: user volume: 1, internal volumes: 1, max. volumes count: 128
ubi2: max/mean erase counter: 9/4, WL threshold: 4096, image sequence number: 1180619459
ubi2: available PEBs: 0, total reserved PEBs: 112, PEBs reserved for bad PEB handling: 4
ubi2: background thread "ubi_bgt2d" started, PID 740
UBIFS (ubi2:0): background thread "ubifs_bgt2_0" started, PID 744
UBIFS (ubi2:0): UBIFS: mounted UBI device 2, volume 0, name "misc"
UBIFS (ubi2:0): LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
UBIFS (ubi2:0): FS size: 11935744 bytes (11 MiB, 94 LEBs), journal size 1015809 bytes (0 MiB, 6 LEBs)
UBIFS (ubi2:0): reserved for root: 563754 bytes (550 KiB)
UBIFS (ubi2:0): media format: w4/r0 (latest is w4/r0), UUID 2BB5B73B-9EF6-4228-9597-4F935D3599D0, small LPT model
ubi3: attaching mtd7
ubi3: scanning is finished
ubi3 error: ubi_read_volume_table: the layout volume was not found
ubi3 error: ubi_attach_mtd_dev: failed to attach mtd7, error -22
ubi3: attaching mtd7
ubi3: scanning is finished
ubi3: attached mtd7 (name "reserve2", size 88 MiB)
ubi3: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes
ubi3: min./max. I/O unit sizes: 2048/2048, sub-page size 2048
ubi3: VID header offset: 2048 (aligned 2048), data offset: 4096
ubi3: good PEBs: 700, bad PEBs: 4, corrupted PEBs: 0
ubi3: user volume: 0, internal volumes: 1, max. volumes count: 128
ubi3: max/mean erase counter: 0/0, WL threshold: 4096, image sequence number: 788934065
ubi3: available PEBs: 696, total reserved PEBs: 4, PEBs reserved for bad PEB handling: 0
ubi3: background thread "ubi_bgt3d" started, PID 753
UBIFS (ubi3:0): default file-system created
UBIFS (ubi3:0): background thread "ubifs_bgt3_0" started, PID 759
UBIFS (ubi3:0): UBIFS: mounted UBI device 3, volume 0, name "nvdada_log"
UBIFS (ubi3:0): LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
UBIFS (ubi3:0): FS size: 86978560 bytes (82 MiB, 685 LEBs), journal size 4317184 bytes (4 MiB, 34 LEBs)
UBIFS (ubi3:0): reserved for root: 4108212 bytes (4011 KiB)
UBIFS (ubi3:0): media format: w4/r0 (latest is w4/r0), UUID C5315BC2-407F-4FC9-AD6D-05B93FD821C4, small LPT model
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
random: avahi-daemon urandom read with 3 bits of entropy available
macb e000b000.ethernet eth0: unable to generate target frequency: 25000000 Hz
macb e000b000.ethernet eth0: link up (100/Full)
IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
In axi fpga driver!
request_mem_region OK!
AXI fpga dev virtual address is 0xcfcc0000
*base_vir_addr = 0xb031
In fpga mem driver!
request_mem_region OK!
fpga mem virtual address is 0xd2000000
random: nonblocking pool is initialized


===========================================Miner log===========================================
1970-01-01 00:00:11 Open miner sn file /config/sn error
1970-01-01 00:00:11 Miner compile time: Tue Dec  6 16:12:30 CST 2022 type: Antminer S19 Pro sn :
1970-01-01 00:00:12 This is fix-freq version
1970-01-01 00:00:12 Miner compile time: Tue Dec  6 16:12:30 CST 2022 type: Antminer S19 Pro
1970-01-01 00:00:12 commit version: dd076742 2022-10-27 22:42:25, build by: jenkins 2022-12-06 16:28:38
1970-01-01 00:00:12 opt_multi_version     = 1
1970-01-01 00:00:12 opt_bitmain_ab        = 1
1970-01-01 00:00:12 mid_auto_gen          = 0
1970-01-01 00:00:12 opt_bitmain_work_mode = 0
1970-01-01 00:00:12 mmap fpga_mem_addr_hal = 0xb5900000
1970-01-01 00:00:12 HASH_ON_PLUG V9 = 0x7
1970-01-01 00:00:12 Note: front fan is power on!
1970-01-01 00:00:12 Note: rear fan is power on!
1970-01-01 00:00:12 start the http log.
1970-01-01 00:00:12 httpListenThread start ret=0
1970-01-01 00:00:12 start listen on 6060 ...
1970-01-01 00:00:12 load machine NBP1901 conf
1970-01-01 00:00:12 machine : NBP1901 
1970-01-01 00:00:12 chain_num 4, chain_domain_num 38, chain_asic_num 114, domain_asic_num 3
2023-07-31 02:16:36 miner ID : 80649c093efaa85c
2023-07-31 02:16:36 FPGA Version = 0xB031
2023-07-31 02:16:36 HASH_ON_PLUG V9 = 0x7
2023-07-31 02:16:36 ==========================capability start==========================
2023-07-31 02:16:36 board num = 3
2023-07-31 02:16:36 board id = 0, chain num = 1
2023-07-31 02:16:36 	chain id = 0
2023-07-31 02:16:36 board id = 1, chain num = 1
2023-07-31 02:16:36 	chain id = 1
2023-07-31 02:16:36 board id = 2, chain num = 1
2023-07-31 02:16:36 	chain id = 2
2023-07-31 02:16:36 ==========================capability end============================
2023-07-31 02:16:36 chain num = 3
2023-07-31 02:16:38 [chain 0]
2023-07-31 02:16:38 0x0000 11 4A 30 EA 22 4F 74 86   61 3A 6C DB 7A C4 29 A4 
2023-07-31 02:16:38 0x0010 99 75 A0 0E E4 66 3F 9E   45 87 FD 08 D2 E3 FD 29 
2023-07-31 02:16:38 0x0020 FD E4 FB 6B 51 1C 75 81   FE 92 3C E6 7D 82 E4 00 
2023-07-31 02:16:38 0x0030 E6 47 9D 37 26 27 59 C0   C6 18 54 4D FF 65 3A B2 
2023-07-31 02:16:38 0x0040 2F B3 39 CF D2 F4 82 8F   E7 3D FF FF FF FF FF FF 
2023-07-31 02:16:38 0x0050 FF FF FF FF FF FF FF FF   FF FF FF FF FF FF FF FF 
2023-07-31 02:16:38 0x0060 FF FF FF FF FF FF FF FF   FF FF FF FF FF FF FF FF 
2023-07-31 02:16:38 0x0070 FF FF FF FF FF FF FF FF   FF FF FF FF FF FF FF FF 
2023-07-31 02:16:38 0x0080 FF FF FF FF FF FF FF FF   FF FF FF FF FF FF FF FF 
2023-07-31 02:16:38 0x0090 FF FF FF FF FF FF FF FF   FF FF FF FF FF FF FF FF 
2023-07-31 02:16:38 0x00A0 FF FF FF FF FF FF FF FF   FF FF FF FF FF FF FF FF 
2023-07-31 02:16:38 0x00B0 FF FF FF FF FF FF FF FF   FF FF FF FF FF FF FF FF 
2023-07-31 02:16:38 0x00C0 FF FF FF FF FF FF FF FF   FF FF FF FF FF FF FF FF 
2023-07-31 02:16:38 0x00D0 FF FF FF FF FF FF FF FF   FF FF FF FF FF FF FF FF 
2023-07-31 02:16:38 0x00E0 FF FF FF FF FF FF FF FF   FF FF FF FF FF FF FF FF 
2023-07-31 02:16:38 0x00F0 FF FF FF FF FF FF FF FF   FF FF FF FF FF FF FF 5A 
2023-07-31 02:16:38 
2023-07-31 02:16:39 [chain 1]
2023-07-31 02:16:39 0x0000 11 4A A5 30 EC 29 17 27   0D 5A 11 84 95 D1 CE E2 
2023-07-31 02:16:39 0x0010 2D 21 99 6A 27 FB C9 76   E1 A0 58 9A 6C 06 47 AA 
2023-07-31 02:16:39 0x0020 F4 DD 09 CE 37 4F C3 1C   B5 B3 87 B8 B5 36 91 81 
2023-07-31 02:16:39 0x0030 A1 C0 B1 97 59 5C AA 0F   68 6C B8 52 B9 50 71 CC 
2023-07-31 02:16:39 0x0040 9E 54 98 C4 CE DF FD 04   D2 4F FF FF FF FF FF FF 
2023-07-31 02:16:39 0x0050 FF FF FF FF FF FF FF FF   FF FF FF FF FF FF FF FF 
2023-07-31 02:16:39 0x0060 FF FF FF FF FF FF FF FF   FF FF FF FF FF FF FF FF 
2023-07-31 02:16:39 0x0070 FF FF FF FF FF FF FF FF   FF FF FF FF FF FF FF FF 
2023-07-31 02:16:39 0x0080 FF FF FF FF FF FF FF FF   FF FF FF FF FF FF FF FF 
2023-07-31 02:16:39 0x0090 FF FF FF FF FF FF FF FF   FF FF FF FF FF FF FF FF 
2023-07-31 02:16:39 0x00A0 FF FF FF FF FF FF FF FF   FF FF FF FF FF FF FF FF 
2023-07-31 02:16:39 0x00B0 FF FF FF FF FF FF FF FF   FF FF FF FF FF FF FF FF 
2023-07-31 02:16:39 0x00C0 FF FF FF FF FF FF FF FF   FF FF FF FF FF FF FF FF 
2023-07-31 02:16:39 0x00D0 FF FF FF FF FF FF FF FF   FF FF FF FF FF FF FF FF 
2023-07-31 02:16:39 0x00E0 FF FF FF FF FF FF FF FF   FF FF FF FF FF FF FF FF 
2023-07-31 02:16:39 0x00F0 FF FF FF FF FF FF FF FF   FF FF FF FF FF FF FF 5A 
2023-07-31 02:16:39 
2023-07-31 02:16:41 [chain 2]
2023-07-31 02:16:41 0x0000 11 4A 54 8E 39 84 C7 B2   BA 68 89 66 39 68 01 90 
2023-07-31 02:16:41 0x0010 43 1D D9 28 31 29 EB E6   70 BB C8 7D 97 22 CA B9 
2023-07-31 02:16:41 0x0020 03 D4 DE 0F 59 4F BA CB   2F A4 19 90 3A 00 03 60 
2023-07-31 02:16:41 0x0030 9A 2D DB 94 8B 45 1A 51   23 F1 4C B7 5B 0B 45 4E 
2023-07-31 02:16:41 0x0040 04 89 37 0C A6 39 35 C1   B2 5E FF FF FF FF FF FF 
2023-07-31 02:16:41 0x0050 FF FF FF FF FF FF FF FF   FF FF FF FF FF FF FF FF 
2023-07-31 02:16:41 0x0060 FF FF FF FF FF FF FF FF   FF FF FF FF FF FF FF FF 
2023-07-31 02:16:41 0x0070 FF FF FF FF FF FF FF FF   FF FF FF FF FF FF FF FF 
2023-07-31 02:16:41 0x0080 FF FF FF FF FF FF FF FF   FF FF FF FF FF FF FF FF 
2023-07-31 02:16:41 0x0090 FF FF FF FF FF FF FF FF   FF FF FF FF FF FF FF FF 
2023-07-31 02:16:41 0x00A0 FF FF FF FF FF FF FF FF   FF FF FF FF FF FF FF FF 
2023-07-31 02:16:41 0x00B0 FF FF FF FF FF FF FF FF   FF FF FF FF FF FF FF FF 
2023-07-31 02:16:41 0x00C0 FF FF FF FF FF FF FF FF   FF FF FF FF FF FF FF FF 
2023-07-31 02:16:41 0x00D0 FF FF FF FF FF FF FF FF   FF FF FF FF FF FF FF FF 
2023-07-31 02:16:41 0x00E0 FF FF FF FF FF FF FF FF   FF FF FF FF FF FF FF FF 
2023-07-31 02:16:41 0x00F0 FF FF FF FF FF FF FF FF   FF FF FF FF FF FF FF 5A 
2023-07-31 02:16:41 
2023-07-31 02:16:41 fan_eft : 0  fan_pwm : 100
2023-07-31 02:16:41 create thread
2023-07-31 02:16:41 fixed working voltage = 1260
2023-07-31 02:16:41 Chain [0] PCB Version: 0x011e
2023-07-31 02:16:41 Chain [0] BOM Version: 0x0100
2023-07-31 02:16:41 Chain [1] PCB Version: 0x011e
2023-07-31 02:16:41 Chain [1] BOM Version: 0x0100
2023-07-31 02:16:41 Chain [2] PCB Version: 0x011e
2023-07-31 02:16:41 Chain [2] BOM Version: 0x0100
2023-07-31 02:16:43 Fan check passed.
2023-07-31 02:16:44 chain[0] PIC jump to app
2023-07-31 02:16:46 Check chain[0] PIC fw version=0x89
2023-07-31 02:16:47 chain[1] PIC jump to app
2023-07-31 02:16:48 Check chain[1] PIC fw version=0x89
2023-07-31 02:16:49 chain[2] PIC jump to app
2023-07-31 02:16:51 Check chain[2] PIC fw version=0x89
2023-07-31 02:16:51 create thread
2023-07-31 02:16:51 max sensor num = 4
2023-07-31 02:16:51 temperature_monitor_thread start...
2023-07-31 02:17:00 power type version: 0x0071
2023-07-31 02:17:00 Enter sleep to make sure power release finish.
2023-07-31 02:17:31 Slept 30 seconds, diff = 0.
2023-07-31 02:17:31 set_voltage_by_steps to 1500.
2023-07-31 02:17:37 start up min temp by 75a = 21
2023-07-31 02:17:37 set UART baud to 115200
2023-07-31 02:17:45 Chain[0]: find 114 asic, times 0
2023-07-31 02:17:49 chain avg vol rise to 15.71
2023-07-31 02:17:53 Chain[1]: find 114 asic, times 0
2023-07-31 02:18:00 Chain[2]: find 114 asic, times 0
2023-07-31 02:18:00 pulse_mode = 1, ccdly_sel = 1, pwth_sel = 1
2023-07-31 02:18:05 min freq in eeprom = 525
2023-07-31 02:18:05 fixed frequency is 525
2023-07-31 02:18:05 Bring up temperature is 21
2023-07-31 02:18:05 set UART baud to 12000000
2023-07-31 02:18:05 set_voltage_by_steps to 1260.
2023-07-31 02:18:12 STATUS_INITED: soc init done!
2023-07-31 02:18:12 create thread
2023-07-31 02:18:12 create thread
2023-07-31 02:18:15 start to init...
2023-07-31 02:18:23 Init done!
2023-07-31 02:18:23 STATUS_OKAY
2023-07-31 02:18:23 start the cached job
2023-07-31 02:18:23 Version num 8
2023-07-31 02:18:23 Mask num 0xe000
2023-07-31 02:18:23 freq = 525, percent = 90, hcn = 12480, timeout = 449
2023-07-31 02:18:23 set_start_time_point total_tv_start_sys=127 total_tv_end_sys=128
2023-07-31 02:18:23 set_voltage_by_steps to 1282.
2023-07-31 02:21:41 chain avg vol drop to 1.27