Problem with S19 pro. The hashrate has dropped.

Comments

7 comments

    Here is a screenshot.

    0
    Comment actions Permalink

    There are also such errors

    2023-07-14 10:13:19 read asic reg error: expect chain = 1, chip = 130, reg = 176, got chain = 5, chip = 130, reg = 176
    2023-07-14 10:13:19 read asic reg error: expect chain = 1, chip = 130, reg = 176, got chain = 9, chip = 0, reg = 93

    0
    Comment actions Permalink

    Dear Customer.

     

    From the kernel log, it shows the abnormal chip

    Please kindly exclude the issue by following steps:

     

    1.Check the wires for the hashboard--pull them and re-plug them again, and also you can try to change the new wires.

     

    2.Reboot the miner

    Information for you:

    https://support.bitmain.com/hc/en-us/articles/115000211033-How-to-power-off-reboot-or-restart-the-miner

     

    If there are still the same problems after the above steps, please send it to repair.

    0
    Comment actions Permalink

    Dear Customer,

    If you have any questions please feel free to contact us.

    Please send email to customersupport@bitmain.com

    We will reply to your question as soon as possible.

    0
    Comment actions Permalink

    The log shows that the hash board is faulty, and you need to use a fixture to test the hash board to find the fault.
    I'm Jack, Zeus Mining Technical Support

    0
    Comment actions Permalink

    Hi Jack, thanks for your answer, I will try it.

    0
    Comment actions Permalink

    Dear Customer,

    If you have any questions please feel free to contact us.

    Please send email to customersupport@bitmain.com

    We will reply to your question as soon as possible.

    0
    Comment actions Permalink

Please sign in to leave a comment.