L7 No Hashing
L7 Not hashing, Tested changing power cables, changing wall plugs, Pulling apart and cleaning.
Please Help.
Preemptible hierarchical RCU implementation. Build-time adjustment of leaf fanout to 32. RCU restricting CPUs from NR_CPUS=4 to nr_cpu_ids=2. RCU: Adjusting geometry for rcu_fanout_leaf=32, nr_cpu_ids=2 NR_IRQS:16 nr_irqs:16 16 efuse mapped to cf800000 ps7-slcr mapped to cf802000 L2C: platform modifies aux control register: 0x72360000 -> 0x72760000 L2C: DT/platform modifies aux control register: 0x72360000 -> 0x72760000 L2C-310 erratum 769419 enabled L2C-310 enabling early BRESP for Cortex-A9 L2C-310 full line of zeros enabled for Cortex-A9 L2C-310 ID prefetch enabled, offset 1 lines L2C-310 dynamic clock gating enabled, standby mode enabled L2C-310 cache controller enabled, 8 ways, 512 kB L2C-310: CACHE_ID 0x410000c8, AUX_CTRL 0x76760001 zynq_clock_init: clkc starts at cf802100 Zynq clock init sched_clock: 64 bits at 333MHz, resolution 3ns, wraps every 4398046511103ns clocksource: arm_global_timer: mask: 0xffffffffffffffff max_cycles: 0x4ce07af025, max_idle_ns: 440795209040 ns Switching to timer-based delay loop, resolution 3ns clocksource: ttc_clocksource: mask: 0xffff max_cycles: 0xffff, max_idle_ns: 537538477 ns ps7-ttc #0 at cf80a000, irq=18 Console: colour dummy device 80x30 Calibrating delay loop (skipped), value calculated using timer frequency.. 666.66 BogoMIPS (lpj=3333333) pid_max: default: 32768 minimum: 301 Mount-cache hash table entries: 1024 (order: 0, 4096 bytes) Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes) CPU: Testing write buffer coherency: ok CPU0: thread -1, cpu 0, socket 0, mpidr 80000000 Setting up static identity map for 0x100000 - 0x100058 CPU1: failed to boot: -1 Brought up 1 CPUs SMP: Total of 1 processors activated (666.66 BogoMIPS). CPU: All CPU(s) started in SVC mode. devtmpfs: initialized VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 4 clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns pinctrl core: initialized pinctrl subsystem NET: Registered protocol family 16 DMA: preallocated 256 KiB pool for atomic coherent allocations cpuidle: using governor menu hw-breakpoint: found 5 (+1 reserved) breakpoint and 1 watchpoint registers. hw-breakpoint: maximum watchpoint size is 4 bytes. zynq-ocm f800c000.ps7-ocmc: ZYNQ OCM pool: 256 KiB @ 0xcf880000 vgaarb: loaded SCSI subsystem initialized usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb media: Linux media interface: v0.10 Linux video capture interface: v2.00 pps_core: LinuxPPS API ver. 1 registered pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it> PTP clock support registered EDAC MC: Ver: 3.0.0 Advanced Linux Sound Architecture Driver Initialized. clocksource: Switched to clocksource arm_global_timer NET: Registered protocol family 2 TCP established hash table entries: 2048 (order: 1, 8192 bytes) TCP bind hash table entries: 2048 (order: 2, 16384 bytes) TCP: Hash tables configured (established 2048 bind 2048) UDP hash table entries: 256 (order: 1, 8192 bytes) UDP-Lite hash table entries: 256 (order: 1, 8192 bytes) NET: Registered protocol family 1 RPC: Registered named UNIX socket transport module. RPC: Registered udp transport module. RPC: Registered tcp transport module. RPC: Registered tcp NFSv4.1 backchannel transport module. PCI: CLS 0 bytes, default 64 Trying to unpack rootfs image as initramfs... rootfs image is not initramfs (no cpio magic); looks like an initrd Freeing initrd memory: 6976K (cd429000 - cdaf9000) hw perfevents: enabled with armv7_cortex_a9 PMU driver, 7 counters available futex hash table entries: 512 (order: 3, 32768 bytes) workingset: timestamp_bits=28 max_order=16 bucket_order=0 jffs2: version 2.2. (NAND) (SUMMARY) © 2001-2006 Red Hat, Inc. io scheduler noop registered io scheduler deadline registered io scheduler cfq registered (default) dma-pl330 f8003000.ps7-dma: Loaded driver for PL330 DMAC-241330 dma-pl330 f8003000.ps7-dma: DBUFF-128x8bytes Num_Chans-8 Num_Peri-4 Num_Events-16 e0000000.serial: ttyPS0 at MMIO 0xe0000000 (irq = 159, base_baud = 6249999) is a xuartps console [ttyPS0] enabled xdevcfg f8007000.ps7-dev-cfg: ioremap 0xf8007000 to cf86e000 [drm] Initialized drm 1.1.0 20060810 brd: module loaded loop: module loaded CAN device driver interface gpiod_set_value: invalid GPIO libphy: MACB_mii_bus: probed macb e000b000.ethernet eth0: Cadence GEM rev 0x00020118 at 0xe000b000 irq 31 (00:0a:35:00:00:00) Generic PHY e000b000.etherne:00: attached PHY driver [Generic PHY] (mii_bus:phy_addr=e000b000.etherne:00, irq=-1) e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k e1000e: Copyright(c) 1999 - 2015 Intel Corporation. ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver ehci-pci: EHCI PCI platform driver usbcore: registered new interface driver usb-storage mousedev: PS/2 mouse device common for all mice i2c /dev entries driver cdns-i2c e0005000.ps7_i2c: 100 kHz mmio e0005000 irq 154 Xilinx Zynq CpuIdle Driver started sdhci: Secure Digital Host Controller Interface driver sdhci: Copyright(c) Pierre Ossman sdhci-pltfm: SDHCI platform and OF driver helper mmc0: SDHCI controller on e0100000.ps7-sdio [e0100000.ps7-sdio] using ADMA ledtrig-cpu: registered to indicate activity on CPUs usbcore: registered new interface driver usbhid usbhid: USB HID core driver nand: disable subpage write nand: device found, Manufacturer ID: 0x2c, Chip ID: 0xda nand: Micron MT29F2G08ABAEAWP nand: 256 MiB, SLC, erase size: 128 KiB, page size: 2048, OOB size: 64 nand: NAND_ECC_HW nand: NAND_ECC_HW_SYNDROME mtd->writesize = 2048 ecc->strength = 1 ecc->size = 2048 mtd->writesize = 2048 chip->ecc_strength_ds = 4 chip->ecc_step_ds = 512 nand: WARNING: pl35x-nand: the ECC used on your system is too weak compared to the one required by the NAND chip Bad block table found at page 131008, version 0x01 Bad block table found at page 130944, version 0x01 8 ofpart partitions found on MTD device pl35x-nand Creating 8 MTD partitions on "pl35x-nand": 0x000000000000-0x000002800000 : "BOOT.bin-dts-marker-kernel" 0x000002800000-0x000004800000 : "ramfs" 0x000004800000-0x000005000000 : "configs" 0x000005000000-0x000005200000 : "sig" 0x000005200000-0x000006000000 : "reserve1" 0x000006000000-0x000007000000 : "upgrade-ramfs" 0x000007000000-0x00000a800000 : "upgrade-file" 0x00000a800000-0x000010000000 : "reserve2" nf_conntrack version 0.5.0 (3635 buckets, 14540 max) ip_tables: (C) 2000-2006 Netfilter Core Team NET: Registered protocol family 10 ip6_tables: (C) 2000-2006 Netfilter Core Team sit: IPv6 over IPv4 tunneling driver NET: Registered protocol family 17 can: controller area network core (rev 20120528 abi 9) NET: Registered protocol family 29 can: raw protocol (rev 20120528) can: broadcast manager protocol (rev 20120528 t) can: netlink gateway (rev 20130117) max_hops=1 zynq_pm_ioremap: no compatible node found for 'xlnx,zynq-ddrc-a05' zynq_pm_late_init: Unable to map DDRC IO memory. Registering SWP/SWPB emulation handler hctosys: unable to open rtc device (rtc0) ALSA device list: No soundcards found. RAMDISK: gzip image found at block 0 EXT4-fs (ram0): couldn't mount as ext3 due to feature incompatibilities EXT4-fs warning (device ram0): ext4_update_dynamic_rev:746: updating to rev 1 because of new feature flag, running e2fsck is recommended EXT4-fs (ram0): mounted filesystem without journal. Opts: (null) VFS: Mounted root (ext4 filesystem) on device 1:0. devtmpfs: mounted Freeing unused kernel memory: 1024K (c0a00000 - c0b00000) EXT4-fs (ram0): re-mounted. Opts: block_validity,delalloc,barrier,user_xattr,errors=remount-ro devpts: called with bogus options ubi0: attaching mtd2 ubi0: scanning is finished ubi0: attached mtd2 (name "configs", size 8 MiB) ubi0: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes ubi0: min./max. I/O unit sizes: 2048/2048, sub-page size 2048 ubi0: VID header offset: 2048 (aligned 2048), data offset: 4096 ubi0: good PEBs: 64, bad PEBs: 0, corrupted PEBs: 0 ubi0: user volume: 1, internal volumes: 1, max. volumes count: 128 ubi0: max/mean erase counter: 10/4, WL threshold: 4096, image sequence number: 262741923 ubi0: available PEBs: 36, total reserved PEBs: 28, PEBs reserved for bad PEB handling: 4 ubi0: background thread "ubi_bgt0d" started, PID 729 UBIFS (ubi0:0): background thread "ubifs_bgt0_0" started, PID 733 UBIFS (ubi0:0): recovery needed UBIFS (ubi0:0): recovery completed UBIFS (ubi0:0): UBIFS: mounted UBI device 0, volume 0, name "configs" UBIFS (ubi0:0): LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes UBIFS (ubi0:0): FS size: 1396736 bytes (1 MiB, 11 LEBs), journal size 888833 bytes (0 MiB, 5 LEBs) UBIFS (ubi0:0): reserved for root: 65970 bytes (64 KiB) UBIFS (ubi0:0): media format: w4/r0 (latest is w4/r0), UUID A9E8BDA4-70DE-45D9-83BE-2DD9F129C0C6, small LPT model ubi2: attaching mtd4 ubi2: scanning is finished ubi2: attached mtd4 (name "reserve1", size 14 MiB) ubi2: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes ubi2: min./max. I/O unit sizes: 2048/2048, sub-page size 2048 ubi2: VID header offset: 2048 (aligned 2048), data offset: 4096 ubi2: good PEBs: 112, bad PEBs: 0, corrupted PEBs: 0 ubi2: user volume: 1, internal volumes: 1, max. volumes count: 128 ubi2: max/mean erase counter: 8/4, WL threshold: 4096, image sequence number: 3112738251 ubi2: available PEBs: 0, total reserved PEBs: 112, PEBs reserved for bad PEB handling: 4 ubi2: background thread "ubi_bgt2d" started, PID 740 UBIFS (ubi2:0): background thread "ubifs_bgt2_0" started, PID 744 UBIFS (ubi2:0): recovery needed UBIFS (ubi2:0): recovery completed UBIFS (ubi2:0): UBIFS: mounted UBI device 2, volume 0, name "misc" UBIFS (ubi2:0): LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes UBIFS (ubi2:0): FS size: 11935744 bytes (11 MiB, 94 LEBs), journal size 1015809 bytes (0 MiB, 6 LEBs) UBIFS (ubi2:0): reserved for root: 563754 bytes (550 KiB) UBIFS (ubi2:0): media format: w4/r0 (latest is w4/r0), UUID 94A46FD5-894B-4769-AC01-CE75D5ADC02F, small LPT model ubi3: attaching mtd7 ubi3: scanning is finished ubi3: attached mtd7 (name "reserve2", size 88 MiB) ubi3: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes ubi3: min./max. I/O unit sizes: 2048/2048, sub-page size 2048 ubi3: VID header offset: 2048 (aligned 2048), data offset: 4096 ubi3: good PEBs: 700, bad PEBs: 4, corrupted PEBs: 0 ubi3: user volume: 1, internal volumes: 1, max. volumes count: 128 ubi3: max/mean erase counter: 1/0, WL threshold: 4096, image sequence number: 1216030401 ubi3: available PEBs: 0, total reserved PEBs: 700, PEBs reserved for bad PEB handling: 0 ubi3: background thread "ubi_bgt3d" started, PID 751 UBIFS (ubi3:0): background thread "ubifs_bgt3_0" started, PID 755 UBIFS (ubi3:0): recovery needed UBIFS (ubi3:0): recovery completed UBIFS (ubi3:0): UBIFS: mounted UBI device 3, volume 0, name "nvdada_log" UBIFS (ubi3:0): LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes UBIFS (ubi3:0): FS size: 86978560 bytes (82 MiB, 685 LEBs), journal size 4317184 bytes (4 MiB, 34 LEBs) UBIFS (ubi3:0): reserved for root: 4108212 bytes (4011 KiB) UBIFS (ubi3:0): media format: w4/r0 (latest is w4/r0), UUID B57EE72A-431F-4770-9C1F-06059472537D, small LPT model IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready random: avahi-daemon urandom read with 2 bits of entropy available macb e000b000.ethernet eth0: unable to generate target frequency: 25000000 Hz macb e000b000.ethernet eth0: link up (100/Full) IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready In axi fpga driver! request_mem_region OK! AXI fpga dev virtual address is 0xcfc7c000 *base_vir_addr = 0xb051 In fpga mem driver! request_mem_region OK! fpga mem virtual address is 0xd2000000 random: nonblocking pool is initialized ===========================================Miner log=========================================== time="1970-01-01 00:00:10" level=notice pid=885 msg="power mode: 0!" time="1970-01-01 00:00:10" level=info pid=885 msg="release version" time="1970-01-01 00:00:10" level=info pid=885 msg="asic mode" time="1970-01-01 00:00:10" level=notice pid=885 msg="algo ltc fan_control_mode 2" time="1970-01-01 00:00:10" level=notice pid=885 msg=platform_init time="1970-01-01 00:00:10" level=info pid=885 msg="mmap fpga_mem_addr_hal = 0xb5d08000 " time="1970-01-01 00:00:10" level=info pid=885 msg="HARDWARE_VERSION = 0x2000b051 " time="1970-01-01 00:00:10" level=notice pid=885 msg="chain_offset 0, chain 0" time="1970-01-01 00:00:11" level=notice pid=885 msg="chain_offset 0, chain 0, pic firmware verion = 0xfe" time="1970-01-01 00:00:11" level=notice pid=885 msg="chain_offset 1, chain 1" time="1970-01-01 00:00:11" level=notice pid=885 msg="chain_offset 1, chain 1, pic firmware verion = 0xfe" time="1970-01-01 00:00:11" level=notice pid=885 msg="chain_offset 2, chain 2" time="2023-06-28 09:18:57" level=error pid=885 msg="chain_offset 2, chain 2, get_sw_version error!" time="2023-06-28 09:18:57" level=error pid=885 msg="dev init failed!" time="2023-06-28 09:19:07" level=notice pid=933 msg="power mode: 0!" time="2023-06-28 09:19:07" level=info pid=933 msg="release version" time="2023-06-28 09:19:07" level=info pid=933 msg="asic mode" time="2023-06-28 09:19:07" level=notice pid=933 msg="algo ltc fan_control_mode 2" time="2023-06-28 09:19:07" level=notice pid=933 msg=platform_init time="2023-06-28 09:19:07" level=info pid=933 msg="mmap fpga_mem_addr_hal = 0xb5d39000 " time="2023-06-28 09:19:07" level=info pid=933 msg="HARDWARE_VERSION = 0x2000b051 " time="2023-06-28 09:19:07" level=notice pid=933 msg="chain_offset 0, chain 0" time="2023-06-28 09:19:08" level=notice pid=933 msg="chain_offset 0, chain 0, pic firmware verion = 0xfe" time="2023-06-28 09:19:08" level=notice pid=933 msg="chain_offset 1, chain 1" time="2023-06-28 09:19:09" level=notice pid=933 msg="chain_offset 1, chain 1, pic firmware verion = 0xfe" time="2023-06-28 09:19:09" level=notice pid=933 msg="chain_offset 2, chain 2" time="2023-06-28 09:19:22" level=error pid=933 msg="chain_offset 2, chain 2, get_sw_version error!" time="2023-06-28 09:19:22" level=error pid=933 msg="dev init failed!" time="2023-06-28 09:19:32" level=notice pid=979 msg="power mode: 0!" time="2023-06-28 09:19:32" level=info pid=979 msg="release version" time="2023-06-28 09:19:32" level=info pid=979 msg="asic mode" time="2023-06-28 09:19:32" level=notice pid=979 msg="algo ltc fan_control_mode 2" time="2023-06-28 09:19:32" level=notice pid=979 msg=platform_init time="2023-06-28 09:19:32" level=info pid=979 msg="mmap fpga_mem_addr_hal = 0xb5cbf000 " time="2023-06-28 09:19:32" level=info pid=979 msg="HARDWARE_VERSION = 0x2000b051 " time="2023-06-28 09:19:32" level=notice pid=979 msg="chain_offset 0, chain 0" time="2023-06-28 09:19:33" level=notice pid=979 msg="chain_offset 0, chain 0, pic firmware verion = 0xfe" time="2023-06-28 09:19:33" level=notice pid=979 msg="chain_offset 1, chain 1" time="2023-06-28 09:19:34" level=notice pid=979 msg="chain_offset 1, chain 1, pic firmware verion = 0xfe" time="2023-06-28 09:19:34" level=notice pid=979 msg="chain_offset 2, chain 2" time="2023-06-28 09:19:47" level=error pid=979 msg="chain_offset 2, chain 2, get_sw_version error!" time="2023-06-28 09:19:47" level=error pid=979 msg="dev init failed!" time="2023-06-28 09:19:57" level=notice pid=1117 msg="power mode: 0!" time="2023-06-28 09:19:57" level=info pid=1117 msg="release version" time="2023-06-28 09:19:57" level=info pid=1117 msg="asic mode" time="2023-06-28 09:19:57" level=notice pid=1117 msg="algo ltc fan_control_mode 2" time="2023-06-28 09:19:57" level=notice pid=1117 msg=platform_init time="2023-06-28 09:19:57" level=info pid=1117 msg="mmap fpga_mem_addr_hal = 0xb5d7a000 " time="2023-06-28 09:19:57" level=info pid=1117 msg="HARDWARE_VERSION = 0x2000b051 " time="2023-06-28 09:19:57" level=notice pid=1117 msg="chain_offset 0, chain 0" time="2023-06-28 09:19:58" level=notice pid=1117 msg="chain_offset 0, chain 0, pic firmware verion = 0xfe" time="2023-06-28 09:19:58" level=notice pid=1117 msg="chain_offset 1, chain 1" time="2023-06-28 09:19:59" level=notice pid=1117 msg="chain_offset 1, chain 1, pic firmware verion = 0xfe" time="2023-06-28 09:19:59" level=notice pid=1117 msg="chain_offset 2, chain 2" time="2023-06-28 09:20:12" level=error pid=1117 msg="chain_offset 2, chain 2, get_sw_version error!" time="2023-06-28 09:20:12" level=error pid=1117 msg="dev init failed!" time="2023-06-28 09:20:22" level=notice pid=1385 msg="power mode: 0!" time="2023-06-28 09:20:22" level=info pid=1385 msg="release version" time="2023-06-28 09:20:22" level=info pid=1385 msg="asic mode" time="2023-06-28 09:20:22" level=notice pid=1385 msg="algo ltc fan_control_mode 2" time="2023-06-28 09:20:22" level=notice pid=1385 msg=platform_init time="2023-06-28 09:20:22" level=info pid=1385 msg="mmap fpga_mem_addr_hal = 0xb5d95000 " time="2023-06-28 09:20:22" level=info pid=1385 msg="HARDWARE_VERSION = 0x2000b051 " time="2023-06-28 09:20:22" level=notice pid=1385 msg="chain_offset 0, chain 0" time="2023-06-28 09:20:23" level=notice pid=1385 msg="chain_offset 0, chain 0, pic firmware verion = 0xfe" time="2023-06-28 09:20:23" level=notice pid=1385 msg="chain_offset 1, chain 1" time="2023-06-28 09:20:24" level=notice pid=1385 msg="chain_offset 1, chain 1, pic firmware verion = 0xfe" time="2023-06-28 09:20:24" level=notice pid=1385 msg="chain_offset 2, chain 2" time="2023-06-28 09:20:37" level=error pid=1385 msg="chain_offset 2, chain 2, get_sw_version error!" time="2023-06-28 09:20:37" level=error pid=1385 msg="dev init failed!" time="2023-06-28 09:20:47" level=notice pid=1474 msg="power mode: 0!" time="2023-06-28 09:20:47" level=info pid=1474 msg="release version" time="2023-06-28 09:20:47" level=info pid=1474 msg="asic mode" time="2023-06-28 09:20:47" level=notice pid=1474 msg="algo ltc fan_control_mode 2" time="2023-06-28 09:20:47" level=notice pid=1474 msg=platform_init time="2023-06-28 09:20:47" level=info pid=1474 msg="mmap fpga_mem_addr_hal = 0xb5d3f000 " time="2023-06-28 09:20:47" level=info pid=1474 msg="HARDWARE_VERSION = 0x2000b051 " time="2023-06-28 09:20:47" level=notice pid=1474 msg="chain_offset 0, chain 0" time="2023-06-28 09:20:48" level=notice pid=1474 msg="chain_offset 0, chain 0, pic firmware verion = 0xfe" time="2023-06-28 09:20:48" level=notice pid=1474 msg="chain_offset 1, chain 1" time="2023-06-28 09:20:49" level=notice pid=1474 msg="chain_offset 1, chain 1, pic firmware verion = 0xfe" time="2023-06-28 09:20:49" level=notice pid=1474 msg="chain_offset 2, chain 2" time="2023-06-28 09:21:02" level=error pid=1474 msg="chain_offset 2, chain 2, get_sw_version error!" time="2023-06-28 09:21:02" level=error pid=1474 msg="dev init failed!" time="2023-06-28 09:21:13" level=notice pid=1611 msg="power mode: 0!" time="2023-06-28 09:21:13" level=info pid=1611 msg="release version" time="2023-06-28 09:21:13" level=info pid=1611 msg="asic mode" time="2023-06-28 09:21:13" level=notice pid=1611 msg="algo ltc fan_control_mode 2" time="2023-06-28 09:21:13" level=notice pid=1611 msg=platform_init time="2023-06-28 09:21:13" level=info pid=1611 msg="mmap fpga_mem_addr_hal = 0xb5d03000 "
-
From the kernel log, it shows get_sw_version error
please kindly exclude the issue by following steps:
1.Check the wires for the hashboard--pull them and re-plug them again, and also you can try to change the new wires.
2.Update the firmwareIf there are still problems after the above steps, please send the latest kernel log and miner status.
We will double-check for you. -
Dear Customer,
If you have any questions please feel free to contact us.
Please send email to customersupport@bitmain.com
We will reply to your question as soon as possible.
Please sign in to leave a comment.
Comments
2 comments