s19 90th realtime hash abnormal

i installed 10 days ago check what problem it has 

minner logs 

[    0.000000@0] Booting Linux on physical CPU 0x0
[    0.000000@0] Linux version 4.9.113 (jenkins@nomd-nomd-fwc-bj) (gcc version 6.3.1 20170109 (Linaro GCC 6.3-2017.02) ) #1 SMP PREEMPT Mon Dec 26 17:29:52 CST 2022
[    0.000000@0] Boot CPU: AArch64 Processor [410fd034]
[    0.000000@0] earlycon: aml_uart0 at MMIO 0x00000000ff803000 (options '')
[    0.000000@0] bootconsole [aml_uart0] enabled
[    0.000000@0] efi: Getting EFI parameters from FDT:
[    0.000000@0] efi: UEFI not found.
[    0.000000@0] 	07400000 - 07500000,     1024 KB, ramoops@0x07400000
[    0.000000@0] __reserved_mem_alloc_size, start:0x0000000005000000, end:0x0000000005400000, len:4 MiB
[    0.000000@0] 	05000000 - 05400000,     4096 KB, linux,secmon
[    0.000000@0] cma: Reserved 16 MiB at 0x000000000f000000
[    0.000000@0] On node 0 totalpages: 65536
[    0.000000@0]   DMA zone: 1024 pages used for memmap
[    0.000000@0]   DMA zone: 0 pages reserved
[    0.000000@0]   DMA zone: 65536 pages, LIFO batch:15
[    0.000000@0] psci: probing for conduit method from DT.
[    0.000000@0] psci: PSCIv1.0 detected in firmware.
[    0.000000@0] psci: Using standard PSCI v0.2 function IDs
[    0.000000@0] psci: MIGRATE_INFO_TYPE not supported.
[    0.000000@0] psci: SMC Calling Convention v1.1
[    0.000000@0] percpu: Embedded 25 pages/cpu @ffffffc00ef53000 s64536 r8192 d29672 u102400
[    0.000000@0] pcpu-alloc: s64536 r8192 d29672 u102400 alloc=25*4096
[    0.000000@0] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 
[    0.000000@0] Detected VIPT I-cache on CPU0
[    0.000000@0] CPU features: enabling workaround for ARM erratum 845719
[    0.000000@0] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 64512
[    0.000000@0] Kernel command line: init=/init console=ttyS0,115200 no_console_suspend earlycon=aml_uart,0xff803000 ramoops.pstore_en=1 ramoops.record_size=0x8000 ramoops.console_size=0x4000 logo=,loaded,androidboot.selinux=enforcing androidboot.firstboot=1 jtag=disable androidboot.hardware=amlogic androidboot.bootloader=U-Boot 2015.01 androidboot.build.expect.baseband=N/A androidboot.serialno=1234567890 rootfstype=ramfs init=/sbin/init
[    0.000000@0] PID hash table entries: 1024 (order: 1, 8192 bytes)
[    0.000000@0] Dentry cache hash table entries: 32768 (order: 6, 262144 bytes)
[    0.000000@0] Inode-cache hash table entries: 16384 (order: 5, 131072 bytes)
[    0.000000@0] Memory: 211688K/262144K available (8764K kernel code, 1194K rwdata, 2424K rodata, 3648K init, 1017K bss, 29976K reserved, 20480K cma-reserved)
[    0.000000@0] Virtual kernel memory layout:
[    0.000000@0]     modules : 0xffffff8000000000 - 0xffffff8008000000   (   128 MB)
[    0.000000@0]     vmalloc : 0xffffff8008000000 - 0xffffffbebfff0000   (   250 GB)
[    0.000000@0]       .text : 0xffffff8009080000 - 0xffffff8009910000   (  8768 KB)
[    0.000000@0]     .rodata : 0xffffff8009910000 - 0xffffff8009b80000   (  2496 KB)
[    0.000000@0]       .init : 0xffffff8009b80000 - 0xffffff8009f10000   (  3648 KB)
[    0.000000@0]       .data : 0xffffff8009f10000 - 0xffffff800a03aa00   (  1195 KB)
[    0.000000@0]        .bss : 0xffffff800a03aa00 - 0xffffff800a139034   (  1018 KB)
[    0.000000@0]     fixed   : 0xffffffbefe7fb000 - 0xffffffbefec00000   (  4116 KB)
[    0.000000@0]     PCI I/O : 0xffffffbefee00000 - 0xffffffbeffe00000   (    16 MB)
[    0.000000@0]     vmemmap : 0xffffffbf00000000 - 0xffffffc000000000   (     4 GB maximum)
[    0.000000@0]               0xffffffbf00000000 - 0xffffffbf00400000   (     4 MB actual)
[    0.000000@0]     memory  : 0xffffffc000000000 - 0xffffffc010000000   (   256 MB)
[    0.000000@0] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[    0.000000@0] Preemptible hierarchical RCU implementation.
[    0.000000@0] 	Build-time adjustment of leaf fanout to 64.
[    0.000000@0] 	RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=4.
[    0.000000@0] RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=4
[    0.000000@0] NR_IRQS:64 nr_irqs:64 0
[    0.000000@0] irq_meson_gpio: 100 to 8 gpio interrupt mux initialized
[    0.000000@0] axg_aoclkc_init: register ao clk ok!
[    0.000000@0] axg_amlogic_init_sdemmc: register amlogic sdemmc clk
[    0.000000@0] axg_amlogic_init_sdemmc: register amlogic sdemmc clk
[    0.000000@0] axg_amlogic_init_media: register meson media clk
[    0.000000@0] axg_amlogic_init_misc: register amlogic axg misc clks
[    0.000000@0] axg_amlogic_init_misc: register amlogic sdemmc clk
[    0.000000@0] axg_clkc_init initialization complete
[    0.000000@0] arm_arch_timer: Architected cp15 timer(s) running at 24.00MHz (phys).
[    0.000000@0] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns
[    0.000003@0] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns
[    0.008252@0] meson_bc_timer: mclk->mux_reg =ffffff800800a190,mclk->reg =ffffff800800c194
[    0.016905@0] Console: colour dummy device 80x25
[    0.021106@0] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=96000)
[    0.031586@0] pid_max: default: 32768 minimum: 301
[    0.036435@0] thread_stack_cache_init, vmap:ffffffc00e5af600, bitmap:ffffffc00e5a3000, cache page:e5e0
[    0.045772@0] thread_stack_cache_init, allocation vm area:ffffffc00e5d94c0, addr:ffffff8020000000, size:20001000
[    0.056005@0] cpu 0, vmap_stack:[ffffffc00ef5c960-ffffffc00ef60950]
[    0.062303@0] cpu 0, irq_stack: [ffffffc00ef53060-ffffffc00ef57050]
[    0.068603@0] cpu 1, vmap_stack:[ffffffc00ef75960-ffffffc00ef79950]
[    0.074903@0] cpu 1, irq_stack: [ffffffc00ef6c060-ffffffc00ef70050]
[    0.081203@0] cpu 2, vmap_stack:[ffffffc00ef8e960-ffffffc00ef92950]
[    0.087503@0] cpu 2, irq_stack: [ffffffc00ef85060-ffffffc00ef89050]
[    0.093803@0] cpu 3, vmap_stack:[ffffffc00efa7960-ffffffc00efab950]
[    0.100103@0] cpu 3, irq_stack: [ffffffc00ef9e060-ffffffc00efa2050]
[    0.106462@0] Security Framework initialized
[    0.110695@0] SELinux:  Initializing.
[    0.114387@0] SELinux:  Starting in permissive mode
[    0.114424@0] Mount-cache hash table entries: 512 (order: 0, 4096 bytes)
[    0.121106@0] Mountpoint-cache hash table entries: 512 (order: 0, 4096 bytes)
[    0.128835@0] ftrace: allocating 30061 entries in 118 pages
[    0.186416@0] sched-energy: CPU device node has no sched-energy-costs
[    0.187225@0] CPU0: update cpu_capacity 1024
[    0.191552@0] ASID allocator initialised with 32768 entries
[    0.229689@0] secmon: can't fine clear_range
[    0.229894@0] EFI services will not be available.
[    0.233154@0] Meson chip version = RevC (25:C - 23:0)
[    0.266825@1] Detected VIPT I-cache on CPU1
[    0.266885@1] CPU1: update cpu_capacity 1024
[    0.266887@1] CPU1: Booted secondary processor [410fd034]
[    0.294885@2] Detected VIPT I-cache on CPU2
[    0.294937@2] CPU2: update cpu_capacity 1024
[    0.294939@2] CPU2: Booted secondary processor [410fd034]
[    0.322957@3] Detected VIPT I-cache on CPU3
[    0.323008@3] CPU3: update cpu_capacity 1024
[    0.323010@3] CPU3: Booted secondary processor [410fd034]
[    0.323098@0] Brought up 4 CPUs
[    0.362320@0] SMP: Total of 4 processors activated.
[    0.367228@0] CPU features: detected feature: 32-bit EL0 Support
[    0.373264@0] CPU features: detected feature: Kernel page table isolation (KPTI)
[    0.383821@0] CPU: All CPU(s) started at EL2
[    0.385004@0] alternatives: patching kernel code
[    0.390297@1] addr:ffffff802007be10 is in kernel, size fix 4096->10, data:mode=0755
[    0.397531@0] devtmpfs: initialized
[    0.412540@0] DMI not present or invalid.
[    0.412949@0] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[    0.420905@0] futex hash table entries: 1024 (order: 4, 65536 bytes)
[    0.427482@0] pinctrl core: initialized pinctrl subsystem
[    0.433865@0] NET: Registered protocol family 16
[    0.457433@0] cpuidle: using governor menu
[    0.457922@0] vdso: 2 pages (1 code @ ffffff8009917000, 1 data @ ffffff8009f14000)
[    0.463541@0] hw-breakpoint: found 6 breakpoint and 2 watchpoint registers.
[    0.470951@0] DMA: preallocated 256 KiB pool for atomic allocations
[    0.477116@0] clkmsr: clkmsr: driver init
[    0.481148@0] aml_watch_point_probe, in, wp:2
[    0.485718@0] pstore: using zlib compression
[    0.489982@0] console [pstore-1] enabled
[    0.493422@0] pstore: Registered ramoops as persistent store backend
[    0.499830@0] ramoops: attached 0x100000@0x7400000, ecc: 0/0
[    0.514180@0] aml_iomap: amlogic iomap probe done
[    0.521024@0] clkmsr: msr_clk_reg0=ffffff800817e004,msr_clk_reg2=ffffff80081d100c
[    0.522966@0] clkmsr ffd18004.meson_clk_msr: failed to get msr ring reg0
[    0.627439@0] usbcore: registered new interface driver usbfs
[    0.627601@0] usbcore: registered new interface driver hub
[    0.633232@0] usbcore: registered new device driver usb
[    0.638553@0] pps_core: LinuxPPS API ver. 1 registered
[    0.643445@0] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[    0.652838@0] PTP clock support registered
[    0.657177@0] dmi: Firmware registration failed.
[    0.662174@0] secmon: reserve_mem_size:0x300000
[    0.666202@0] secmon secmon: assigned reserved memory node linux,secmon
[    0.673100@0] secmon: get page:ffffffbf00140000, 5000
[    0.677816@0] secmon: share in base: 0xffffffc0050fe000, share out base: 0xffffffc0050ff000
[    0.686205@0] secmon: phy_in_base: 0x50fe000, phy_out_base: 0x50ff000
[    0.694087@0] NetLabel: Initializing
[    0.696257@0] NetLabel:  domain hash size = 128
[    0.700839@0] NetLabel:  protocols = UNLABELED CIPSOv4
[    0.706070@0] NetLabel:  unlabeled traffic allowed by default
[    0.712676@0] clocksource: Switched to clocksource arch_sys_counter
[    0.839455@0] VFS: Disk quotas dquot_6.6.0
[    0.839603@0] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    0.865631@0] NET: Registered protocol family 2
[    0.866688@0] TCP established hash table entries: 2048 (order: 2, 16384 bytes)
[    0.871915@0] TCP bind hash table entries: 2048 (order: 3, 32768 bytes)
[    0.878546@0] TCP: Hash tables configured (established 2048 bind 2048)
[    0.885151@0] UDP hash table entries: 256 (order: 1, 8192 bytes)
[    0.891093@0] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
[    0.897874@0] NET: Registered protocol family 1
[    0.902795@0] RPC: Registered named UNIX socket transport module.
[    0.908231@0] RPC: Registered udp transport module.
[    0.913118@0] RPC: Registered tcp transport module.
[    0.918013@0] RPC: Registered tcp NFSv4.1 backchannel transport module.
[    0.927130@0] Unpacking initramfs...
[    1.427757@2] Initramfs unpacking failed: junk in compressed archive
[    1.434605@2] Freeing initrd memory: 6572K
[    1.435505@2] hw perfevents: clusterb_enabled = 0
[    1.437837@2] hw perfevents: cpumasks 0xf, 0x0
[    1.442315@2] hw perfevents: cluster A irq = 7
[    1.446883@2] hw perfevents: enabled with armv8_pmuv3 PMU driver, 7 counters available
[    1.457066@2] audit: initializing netlink subsys (disabled)
[    1.460386@2] audit: type=2000 audit(1.272:1): initialized
[    1.467690@2] workingset: timestamp_bits=62 max_order=16 bucket_order=0
[    1.491823@2] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[    1.494775@2] NFS: Registering the id_resolver key type
[    1.497535@2] Key type id_resolver registered
[    1.501846@2] Key type id_legacy registered
[    1.506494@2] fuse init (API version 7.26)
[    1.511882@2] SELinux:  Registering netfilter hooks
[    1.518086@2] NET: Registered protocol family 38
[    1.518148@2] Key type asymmetric registered
[    1.521389@2] Asymmetric key parser 'x509' registered
[    1.526873@2] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 248)
[    1.534093@2] io scheduler noop registered (default)
[    1.539055@2] io scheduler deadline registered
[    1.543861@2] io scheduler cfq registered
[    1.564196@1] random: fast init done
[    1.564296@1] random: crng init done
[    1.564836@2] Unable to detect cache hierarchy for CPU 0
[    1.608740@2] loop: module loaded
[    1.614278@2] zram: Added device: zram0
[    1.614676@2] mtdoops: mtd device (mtddev=name/number) must be supplied
[    1.619535@2] libphy: Fixed MDIO Bus: probed
[    1.624608@2] tun: Universal TUN/TAP device driver, 1.6
[    1.628701@2] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[    1.636954@2]  ee eth reset:Addr = ffffff80081fd008
[    1.644369@2] meson6-dwmac ff3f0000.ethernet: no reset control found
[    1.646382@2] stmmac - user ID: 0x11, Synopsys ID: 0x37
[    1.651603@2]  Ring mode enabled
[    1.654847@2]  DMA HW capability register supported
[    1.659564@2]  Normal descriptors
[    1.662895@2]  RX Checksum Offload Engine supported
[    1.667788@2] 	COE Type 2
[    1.670419@2]  TX Checksum insertion supported
[    1.674874@2]  Wake-Up On Lan supported
[    1.678823@2]  Enable RX Mitigation via HW Watchdog Timer
[    1.692261@2] libphy: stmmac: probed
[    1.692313@2] eth%d: PHY ID 0007c0f1 at 0 IRQ POLL (stmmac-0:00) active
[    1.698745@2] PPP generic driver version 2.4.2
[    1.701772@2] PPP BSD Compression module registered
[    1.706242@2] PPP Deflate Compression module registered
[    1.711501@2] PPP MPPE Compression module registered
[    1.716459@2] NET: Registered protocol family 24
[    1.721935@2] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    1.727855@2] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    1.734900@2] usbcore: registered new interface driver cdc_acm
[    1.740102@2] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
[    1.748524@2] usbcore: registered new interface driver usbserial
[    1.755247@2] mousedev: PS/2 mouse device common for all mice
[    1.760636@2] usbcore: registered new interface driver xpad
[    1.766052@2] i2c /dev entries driver
[    1.770811@2] cpu cpu0: bL_cpufreq_init: CPU 0 initialized
[    1.775073@2] arm_big_little: bL_cpufreq_register: Registered platform driver: scpi
[    1.786073@2] ff803000.serial: clock gate not found
[    1.787567@2] meson_uart ff803000.serial: ==uart0 reg addr = ffffff800830d000
[    1.794796@2] ff803000.serial: ttyS0 at MMIO 0xff803000 (irq = 13, base_baud = 1500000) is a meson_uart
[    1.809718@2] meson_uart ff803000.serial: ttyS0 use xtal(24M) 24000000 change 0 to 115200
[    1.812403@2] console [ttyS0] enabled
[    1.819639@2] bootconsole [aml_uart0] disabled
[    1.829360@0] ff804000.serial: clock gate not found
[    1.833438@0] meson_uart ff804000.serial: ==uart3 reg addr = ffffff8008321000
[    1.840538@0] ff804000.serial: ttyS3 at MMIO 0xff804000 (irq = 14, base_baud = 1500000) is a meson_uart
[    1.850906@1] meson_uart ffd24000.serial: ==uart1 reg addr = ffffff8008323000
[    1.857047@1] ffd24000.serial: ttyS1 at MMIO 0xffd24000 (irq = 25, base_baud = 1500000) is a meson_uart
[    1.867203@2] meson_uart ffd23000.serial: ==uart2 reg addr = ffffff8008325000
[    1.873506@2] ffd23000.serial: ttyS2 at MMIO 0xffd23000 (irq = 26, base_baud = 1500000) is a meson_uart
[    1.884420@0] amlogic-new-usb2 ffe09000.usb2phy: USB2 phy probe:phy_mem:0xffe09000, iomap phy_base:0xffffff8008348000
[    1.893770@0] amlogic-new-usb3 ffe09080.usb3phy: This phy has no usb port
[    1.900250@0] amlogic-new-usb3 ffe09080.usb3phy: USB3 phy probe:phy_mem:0xffe09080, iomap phy_base:0xffffff800834c080
[    1.915304@2] i2c i2c-1: of_i2c: modalias failure on /soc/aobus@ff800000/i2c@5000/mcu6350@40
[    1.919097@2] i2c i2c-1: Failed to create I2C device for /soc/aobus@ff800000/i2c@5000/mcu6350@40
[    1.931441@2] aml_dma ff63e000.aml_dma: Aml dma
[    1.934642@2] aml_aes_dma ff63e000.aml_dma:aml_aes: Aml AES_dma
[    1.939545@2] aml_sha_dma ff63e000.aml_dma:aml_sha: Aml SHA1/SHA224/SHA256 dma
[    1.945927@2] efusekeynum: 4
[    1.948264@2] efusekeyname:             mac	offset:     0	size:     6
[    1.954719@2] efusekeyname:          mac_bt	offset:     6	size:     6
[    1.961122@2] efusekeyname:        mac_wifi	offset:    12	size:     6
[    1.967527@2] efusekeyname:            usid	offset:    18	size:    16
[    1.974353@1] efuse efuse: probe OK!
[    1.979793@1] meson-mmc: mmc driver version: 3.02, 2017-05-15: New Emmc Host Controller
[    1.987015@0] meson-mmc: >>>>>>>>hostbase ffffff8008358000, dmode 
[    1.992113@0] meson-mmc: actual_clock :400000, HHI_nand: 0x80
[    1.997337@0] meson-mmc: [meson_mmc_clk_set_rate_v3] after clock: 0x1000033c
[    2.040812@0] meson-mmc: meson_mmc_probe() : success!
[    2.041068@0] amlogic mtd driver init
[    2.045151@0] prase_get_dtb_nand_parameter:128,parse dts start
[    2.049882@0] bl mode descrete
[    2.052759@0] fip_copies 4
[    2.055423@0] fip_size 0x200000
[    2.058562@0] nand_clk_ctrl 0xffe07000
[    2.062287@0] prase_get_dtb_nand_parameter:234,parse dts end
[    2.067953@0] nand_clk_ctrl 0xffe07000
[    2.071676@0] nand register base ffffff80083df800, nand clock register ffffff80083e1000
[    2.080464@0] plat->aml_nand_device ffffff800a005c10
[    2.084585@0] m3_nand_probe() aml_nand_device ffffff800a005c10
[    2.090646@0] NAND device id: 98 da 90 15 76 16
[    2.094883@0] NAND device: Manufacturer ID: 
[    2.098949@0]  0x98, Chip ID: 0x98 (Toshiba A revision NAND 2Gib TC58NVG1S3HBAI4 )
[    2.106512@0] oob_fill_cnt =32 oob_size =64, bch_bytes =14
[    2.111946@0] ecc mode:6 ecc_page_num=2 eep_need_oobsize=16
[    2.117494@0] plane_num=1 writesize=0x800 ecc.size=0x200 bch_mode=1
[    2.123738@0] mtd->oobavail: 0x8
[    2.127165@0] aml_nand_init 2119: plat-name:bootloader
[    2.132064@0] Creating 1 MTD partitions on "bootloader":
[    2.137348@0] 0x000000000000-0x000000200000 : "bootloader"
[    2.146241@1] bootloader initialized ok
[    2.146606@1] plat->aml_nand_device ffffff800a005c10
[    2.151601@1] m3_nand_probe() aml_nand_device ffffff800a005c10
[    2.157712@1] NAND device id: 98 da 90 15 76 16
[    2.161878@1] NAND device: Manufacturer ID: 
[    2.165946@1]  0x98, Chip ID: 0x98 (Toshiba A revision NAND 2Gib TC58NVG1S3HBAI4 )
[    2.173539@1] oob_fill_cnt =32 oob_size =64, bch_bytes =14
[    2.178953@1] ecc mode:6 ecc_page_num=2 eep_need_oobsize=16
[    2.184491@1] plane_num=1 writesize=0x800 ecc.size=0x200 bch_mode=1
[    2.190744@1] mtd->oobavail: 0x8
[    2.194216@1] aml_nand_init 2119: plat-name:nandnormal
[    2.199094@1] bbt_start=20
[    2.201734@1] env_start=24
[    2.204400@1] key_start=32
[    2.207114@1] dtb_start=40
[    2.209791@1] ddr_start=44
[    2.212464@1] nbbt: info size=0x800 max_scan_blk=24, start_blk=20
[    2.218993@1] get_free_node 43: bitmap=0
[    2.222448@1] get_free_node 55: bitmap=1
[    2.226551@1] get_free_node 43: bitmap=1
[    2.230246@1] get_free_node 55: bitmap=3
[    2.234351@1] get_free_node 43: bitmap=3
[    2.238046@1] get_free_node 55: bitmap=7
[    2.241947@1] nbbt : phy_blk_addr=20, ec=0, phy_page_addr=0, timestamp=1
[    2.248617@1] nbbt free list:
[    2.251565@1] blockN=21, ec=-1, dirty_flag=0
[    2.255811@1] blockN=22, ec=-1, dirty_flag=0
[    2.260057@1] blockN=23, ec=-1, dirty_flag=0
[    2.264306@1] aml_nand_scan_rsv_info 1141: page_num=1
[    2.269741@1] nbbt valid addr: 280000
[    2.272974@1] aml_nand_bbt_check 1306 bbt is valid, reading.
[    2.278607@1] aml_nand_read_rsv_info:423,read nbbt info at 280000
[    2.284881@1] nenv: info size=0x10000 max_scan_blk=32, start_blk=24
[    2.291321@1] get_free_node 43: bitmap=7
[    2.294813@1] get_free_node 55: bitmap=f
[    2.298918@1] get_free_node 43: bitmap=f
[    2.302612@1] get_free_node 55: bitmap=1f
[    2.306803@1] get_free_node 43: bitmap=1f
[    2.310586@1] get_free_node 55: bitmap=3f
[    2.314777@1] get_free_node 43: bitmap=3f
[    2.318559@1] get_free_node 55: bitmap=7f
[    2.322751@1] get_free_node 43: bitmap=7f
[    2.326532@1] get_free_node 55: bitmap=ff
[    2.330725@1] get_free_node 43: bitmap=ff
[    2.334506@1] get_free_node 55: bitmap=1ff
[    2.338784@1] get_free_node 43: bitmap=1ff
[    2.342650@1] get_free_node 55: bitmap=3ff
[    2.346726@1] nenv : phy_blk_addr=24, ec=0, phy_page_addr=0, timestamp=1
[    2.353397@1] nenv free list:
[    2.356328@1] blockN=25, ec=-1, dirty_flag=0
[    2.360591@1] blockN=26, ec=-1, dirty_flag=0
[    2.364838@1] blockN=27, ec=-1, dirty_flag=0
[    2.369085@1] blockN=28, ec=-1, dirty_flag=0
[    2.373331@1] blockN=29, ec=-1, dirty_flag=0
[    2.377577@1] blockN=30, ec=-1, dirty_flag=0
[    2.381824@1] blockN=31, ec=-1, dirty_flag=0
[    2.386071@1] aml_nand_scan_rsv_info 1141: page_num=32
[    2.404146@1] nenv valid addr: 310000
[    2.404180@1] nkey: info size=0x8000 max_scan_blk=40, start_blk=32
[    2.408549@1] get_free_node 43: bitmap=3ff
[    2.412420@1] get_free_node 55: bitmap=7ff
[    2.416713@1] get_free_node 43: bitmap=7ff
[    2.420548@1] get_free_node 55: bitmap=fff
[    2.424861@1] get_free_node 43: bitmap=fff
[    2.428713@1] get_free_node 55: bitmap=1fff
[    2.433077@1] get_free_node 43: bitmap=1fff
[    2.437033@1] get_free_node 55: bitmap=3fff
[    2.441397@1] get_free_node 43: bitmap=3fff
[    2.445353@1] get_free_node 55: bitmap=7fff
[    2.449717@1] get_free_node 43: bitmap=7fff
[    2.453673@1] get_free_node 55: bitmap=ffff
[    2.458037@1] get_free_node 43: bitmap=ffff
[    2.462000@1] get_free_node 55: bitmap=1ffff
[    2.466445@1] get_free_node 43: bitmap=1ffff
[    2.470486@1] get_free_node 55: bitmap=3ffff
[    2.474733@1] nkey : phy_blk_addr=-1, ec=0, phy_page_addr=0, timestamp=0
[    2.481404@1] nkey free list:
[    2.484334@1] blockN=32, ec=-1, dirty_flag=0
[    2.488598@1] blockN=33, ec=-1, dirty_flag=0
[    2.492845@1] blockN=34, ec=-1, dirty_flag=0
[    2.497091@1] blockN=35, ec=-1, dirty_flag=0
[    2.501337@1] blockN=36, ec=-1, dirty_flag=0
[    2.505584@1] blockN=37, ec=-1, dirty_flag=0
[    2.509831@1] blockN=38, ec=-1, dirty_flag=0
[    2.514078@1] blockN=39, ec=-1, dirty_flag=0
[    2.518325@1] aml_nand_scan_rsv_info 1141: page_num=16
[    2.523438@1] nkey valid addr: fffffffffffe0000
[    2.527945@1] aml_nand_key_check 1251 NO key exist
[    2.532713@1] ndtb: info size=0x20000 max_scan_blk=44, start_blk=40
[    2.539359@1] get_free_node 43: bitmap=3ffff
[    2.543200@1] get_free_node 55: bitmap=7ffff
[    2.547651@1] get_free_node 43: bitmap=7ffff
[    2.551693@1] get_free_node 55: bitmap=fffff
[    2.556144@1] get_free_node 43: bitmap=fffff
[    2.560186@1] get_free_node 55: bitmap=1fffff
[    2.564519@1] ndtb : phy_blk_addr=40, ec=0, phy_page_addr=0, timestamp=1
[    2.571190@1] ndtb free list:
[    2.574138@1] blockN=41, ec=-1, dirty_flag=0
[    2.578384@1] blockN=42, ec=-1, dirty_flag=0
[    2.582631@1] blockN=43, ec=-1, dirty_flag=0
[    2.586876@1] aml_nand_scan_rsv_info 1141: page_num=64
[    2.604959@1] ndtb valid addr: 500000
[    2.604992@1] nddr: info size=0x20000 max_scan_blk=46, start_blk=44
[    2.609453@1] get_free_node 43: bitmap=1fffff
[    2.613581@1] get_free_node 55: bitmap=3fffff
[    2.618120@1] get_free_node 43: bitmap=3fffff
[    2.622248@1] get_free_node 55: bitmap=7fffff
[    2.626581@1] nddr : phy_blk_addr=-1, ec=0, phy_page_addr=0, timestamp=0
[    2.633252@1] nddr free list:
[    2.636183@1] blockN=44, ec=-1, dirty_flag=0
[    2.640446@1] blockN=45, ec=-1, dirty_flag=0
[    2.644693@1] aml_nand_scan_rsv_info 1141: page_num=64
[    2.649806@1] nddr valid addr: fffffffffffe0000
[    2.654313@1] aml_nand_ddr_check 1281 NO ddr exist
[    2.659083@1] tpl: off 8388608, size 8388608
[    2.756829@1]  NAND bbt detect factory Bad block at c000000
[    2.756881@1] aml_nand_add_partition:394 factory bad addr=600
[    2.762557@1]  NAND bbt detect factory Bad block at c020000
[    2.768059@1] aml_nand_add_partition:394 factory bad addr=601
[    2.778931@1]  NAND bbt detect factory Bad block at c9e0000
[    2.779307@1] aml_nand_add_partition:394 factory bad addr=64f
[    2.813694@1] Creating 6 MTD partitions on "nandnormal":
[    2.813741@1] 0x000000800000-0x000001000000 : "tpl"
[    2.825537@0] 0x000001000000-0x000001200000 : "misc"
[    2.828781@2] 0x000001200000-0x000002200000 : "recovery"
[    2.840943@3] 0x000002200000-0x000004200000 : "boot"
[    2.860177@2] 0x000004200000-0x000004700000 : "config"
[    2.864929@2] 0x000004700000-0x000010000000 : "nvdata"
[    2.929531@2]  NAND bbt detect factory Bad block at c000000
[    2.929647@2]  NAND bbt detect factory Bad block at c020000
[    2.940216@2]  NAND bbt detect factory Bad block at c9e0000
[    2.971409@1] nandnormal initialized ok
[    2.971516@1] aml_ubootenv_init: register env chardev
[    2.975032@1] aml_ubootenv_init: register env chardev OK
[    2.980088@1] amlnf_dtb_init: register dtb cdev
[    2.984820@1] amlnf_dtb_init: register dtd cdev OK
[    2.989258@1] mtd_nand_probe 267 , err = 0
[    2.994381@1] aml_vrtc rtc: rtc core: registered aml_vrtc as rtc0
[    2.999827@1] input: aml_vkeypad as /devices/platform/rtc/input/input0
[    3.006882@1] unifykey: storage in base: 0xffffffc005000000
[    3.011445@1] unifykey: storage out base: 0xffffffc005040000
[    3.017063@1] unifykey: storage block base: 0xffffffc005080000
[    3.022854@1] unifykey: probe done!
[    3.027040@1] unifykey: no efuse-version set, use default value: -1
[    3.032580@1] unifykey: key unify config unifykey-num is 6
[    3.038110@1] unifykey: key unify fact unifykey-num is 6
[    3.043313@1] unifykey: unifykey_devno: f200000
[    3.048294@1] unifykey: device unifykeys created ok
[    3.052787@1] unifykey: aml_unifykeys_init done!
[    3.057687@1] sysled: module init
[    3.061181@1] meson_wdt ffd0f0d0.watchdog: start watchdog
[    3.065964@1] meson_wdt ffd0f0d0.watchdog: creat work queue for watch dog
[    3.073306@1] meson_wdt ffd0f0d0.watchdog: AML Watchdog Timer probed done
[    3.082040@1] dmc_monitor_probe
[    3.087835@0] defendkey defendkey: Reserved memory is not enough!
[    3.088646@0] defendkey: probe of defendkey failed with error -22
[    3.095047@0] GACT probability NOT on
[    3.098410@0] Mirror/redirect action on
[    3.102168@0] u32 classifier
[    3.105034@0]     Actions configured
[    3.108557@0] Netfilter messages via NETLINK v0.30.
[    3.113849@0] nf_conntrack version 0.5.0 (2048 buckets, 8192 max)
[    3.120059@0] ctnetlink v0.93: registering with nfnetlink.
[    3.125905@0] xt_time: kernel timezone is -0000
[    3.129654@0] ipip: IPv4 and MPLS over IPv4 tunneling driver
[    3.136275@0] ip_tables: (C) 2000-2006 Netfilter Core Team
[    3.140997@0] arp_tables: arp_tables: (C) 2002 David S. Miller
[    3.146446@0] Initializing XFRM netlink socket
[    3.151986@0] NET: Registered protocol family 10
[    3.157930@0] mip6: Mobile IPv6
[    3.158522@0] ip6_tables: (C) 2000-2006 Netfilter Core Team
[    3.164511@0] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver
[    3.172473@0] NET: Registered protocol family 17
[    3.174774@0] NET: Registered protocol family 15
[    3.179373@0] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this.
[    3.192530@0] l2tp_core: L2TP core driver, V2.0
[    3.196911@0] l2tp_ppp: PPPoL2TP kernel driver, V2.0
[    3.201825@0] l2tp_ip: L2TP IP encapsulation support (L2TPv3)
[    3.207580@0] l2tp_netlink: L2TP netlink interface
[    3.212385@0] l2tp_eth: L2TP ethernet pseudowire support (L2TPv3)
[    3.218449@0] l2tp_debugfs: L2TP debugfs support
[    3.222989@0] l2tp_ip6: L2TP IP encapsulation support for IPv6 (L2TPv3)
[    3.229630@0] NET: Registered protocol family 35
[    3.234564@0] Key type dns_resolver registered
[    3.239109@0] Registered swp emulation handler
[    3.243103@0] Registered cp15_barrier emulation handler
[    3.248204@0] Registered setend emulation handler
[    3.252950@0] disable EAS feature
[    3.257647@2] registered taskstats version 1
[    3.274060@3] dwc3 ff500000.dwc3: Configuration mismatch. dr_mode forced to host
[    3.780498@3] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller
[    3.780588@3] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 1
[    3.788910@3] xhci-hcd xhci-hcd.0.auto: hcc params 0x0220f664 hci version 0x100 quirks 0x02010010
[    3.797293@3] xhci-hcd xhci-hcd.0.auto: irq 22, io mem 0xff500000
[    3.804982@2] hub 1-0:1.0: USB hub found
[    3.807213@2] hub 1-0:1.0: 1 port detected
[    3.811869@2] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller
[    3.816901@2] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 2
[    3.824798@2] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM.
[    3.834273@1] hub 2-0:1.0: USB hub found
[    3.836908@1] hub 2-0:1.0: config failed, hub doesn't have any ports! (err -19)
[    3.844169@1] usb usb2: Unsupported the hub
[    3.848986@1] aml_vrtc rtc: setting system clock to 2015-01-01 00:00:08 UTC (1420070408)
[    3.857039@1] dwc_otg ff400000.dwc2_a: dwc_otg_driver_probe(ffffffc00d18f000)
[    3.857117@1] dwc_otg: usb0: type: 2 speed: 0, config: 0, dma: 0, id: 0, phy: ffe09000, ctrl: 0
[    3.864981@1] dwc_otg ff400000.dwc2_a: base=0xffffff8008580000
[    3.864994@1] dwc_otg ff400000.dwc2_a: dwc_otg_device=0xffffffc00baa5a00
[    3.965607@1] dwc_otg: Core Release: 3.10a
[    3.965680@1] dwc_otg: Setting default values for core params
[    3.969865@1] dwc_otg: curmode: 0, host_only: 0
[    3.974359@1] dwc_otg ff400000.dwc2_a: DMA config: BURST_DEFAULT
[    3.986866@1] dwc_otg: Using Buffer DMA mode
[    3.986904@1] dwc_otg: OTG VER PARAM: 1, OTG VER FLAG: 1
[    3.990809@1] dwc_otg: Working on port type = SLAVE
[    3.995733@1] dwc_otg: Dedicated Tx FIFOs mode
[    4.002566@1] thermal thermal_zone0: binding zone soc_thermal with cdev thermal-cpufreq-0 failed:-22
[    4.009375@1] cpucore_cooling_register, max_cpu_core_num:4
[    4.021572@0] gxbb_pm: enter meson_pm_probe!
[    4.021630@0] no vddio3v3_en pin
[    4.023275@0] pm-meson aml_pm: Can't get switch_clk81
[    4.028439@0] gxbb_pm: meson_pm_probe done
[    4.033333@0] meson_uart ff803000.serial: ttyS0 use xtal(24M) 24000000 change 115200 to 115200
[    4.039614@0] Freeing unused kernel memory: 3648K
[    4.053806@0] meson_uart ff803000.serial: ttyS0 use xtal(24M) 24000000 change 115200 to 115200
[    4.308888@0] ubi0: attaching mtd5
[    4.328456@0] ubi0: scanning is finished
[    4.333386@3] ubi0: attached mtd5 (name "config", size 5 MiB)
[    4.333516@3] ubi0: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes
[    4.340566@3] ubi0: min./max. I/O unit sizes: 2048/2048, sub-page size 2048
[    4.347492@3] ubi0: VID header offset: 2048 (aligned 2048), data offset: 4096
[    4.354592@3] ubi0: good PEBs: 40, bad PEBs: 0, corrupted PEBs: 0
[    4.360705@3] ubi0: user volume: 1, internal volumes: 1, max. volumes count: 128
[    4.368021@3] ubi0: max/mean erase counter: 7/3, WL threshold: 4096, image sequence number: 3069256266
[    4.377302@3] ubi0: available PEBs: 0, total reserved PEBs: 40, PEBs reserved for bad PEB handling: 4
[    4.386502@2] ubi0: background thread "ubi_bgt0d" started, PID 1076
[    4.399476@1] UBIFS (ubi0:0): background thread "ubifs_bgt0_0" started, PID 1080
[    4.417681@3] UBIFS (ubi0:0): recovery needed
[    4.476224@3] UBIFS (ubi0:0): recovery completed
[    4.476482@3] UBIFS (ubi0:0): UBIFS: mounted UBI device 0, volume 0, name "config_data"
[    4.483230@3] UBIFS (ubi0:0): LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
[    4.493268@3] UBIFS (ubi0:0): FS size: 2793472 bytes (2 MiB, 22 LEBs), journal size 1015809 bytes (0 MiB, 6 LEBs)
[    4.503486@3] UBIFS (ubi0:0): reserved for root: 131942 bytes (128 KiB)
[    4.510078@3] UBIFS (ubi0:0): media format: w4/r0 (latest is w4/r0), UUID 443DC171-BBBA-4943-9D75-BA69614F6ACA, small LPT model
[    4.534809@2] ubi2: attaching mtd6
[    5.000453@2]  NAND bbt detect factory Bad block at c000000
[    5.000577@2]  NAND bbt detect factory Bad block at c020000
[    5.043028@2]  NAND bbt detect factory Bad block at c9e0000
[    5.250528@2] ubi2: scanning is finished
[    5.257741@1] ubi2: attached mtd6 (name "nvdata", size 185 MiB)
[    5.258041@1] ubi2: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes
[    5.265102@1] ubi2: min./max. I/O unit sizes: 2048/2048, sub-page size 2048
[    5.272016@1] ubi2: VID header offset: 2048 (aligned 2048), data offset: 4096
[    5.279112@1] ubi2: good PEBs: 1477, bad PEBs: 3, corrupted PEBs: 0
[    5.285360@1] ubi2: user volume: 1, internal volumes: 1, max. volumes count: 128
[    5.292720@1] ubi2: max/mean erase counter: 2/1, WL threshold: 4096, image sequence number: 230709000
[    5.301913@1] ubi2: available PEBs: 0, total reserved PEBs: 1477, PEBs reserved for bad PEB handling: 1
[    5.311370@2] ubi2: background thread "ubi_bgt2d" started, PID 1087
[    5.324188@0] UBIFS (ubi2:0): background thread "ubifs_bgt2_0" started, PID 1091
[    5.342476@1] UBIFS (ubi2:0): recovery needed
[    5.491666@3] UBIFS (ubi2:0): recovery completed
[    5.491958@3] UBIFS (ubi2:0): UBIFS: mounted UBI device 2, volume 0, name "nvdada_log"
[    5.498585@3] UBIFS (ubi2:0): LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
[    5.508627@3] UBIFS (ubi2:0): FS size: 185384960 bytes (176 MiB, 1460 LEBs), journal size 9269248 bytes (8 MiB, 73 LEBs)
[    5.519456@3] UBIFS (ubi2:0): reserved for root: 4952683 bytes (4836 KiB)
[    5.526219@3] UBIFS (ubi2:0): media format: w4/r0 (latest is w4/r0), UUID C8859ACA-97A9-4A01-8DC2-5A9C5B780622, small LPT model
[    5.748495@1] eth0: device MAC address 02:56:9c:f9:28:d1
[    5.833489@0] meson6-dwmac ff3f0000.ethernet eth0: fail to init PTP.
[    5.834763@0] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[    6.084428@2] uart_trans: loading out-of-tree module taints kernel.
[    6.087124@2] register uart_trans chrdev success.
[    6.090252@2] meson_uart ff804000.serial: ttyS3 use xtal(24M) 24000000 change 0 to 9600
[    6.097867@2] tty port open success [/dev/ttyS3]!
[    6.102530@2] meson_uart ff804000.serial: ttyS3 use xtal(24M) 24000000 change 9600 to 115200
[    6.111091@2] init sucess for tty struct (246:3)  [/dev/ttyS3]
[    6.117045@2] meson_uart ffd23000.serial: ttyS2 use xtal(24M) 24000000 change 0 to 9600
[    6.124789@2] tty port open success [/dev/ttyS2]!
[    6.129351@2] meson_uart ffd23000.serial: ttyS2 use xtal(24M) 24000000 change 9600 to 115200
[    6.137771@2] init sucess for tty struct (246:2)  [/dev/ttyS2]
[    6.143902@2] meson_uart ffd24000.serial: ttyS1 use xtal(24M) 24000000 change 0 to 9600
[    6.151578@2] tty port open success [/dev/ttyS1]!
[    6.156238@2] meson_uart ffd24000.serial: ttyS1 use xtal(24M) 24000000 change 9600 to 115200
[    6.164691@2] init sucess for tty struct (246:1)  [/dev/ttyS1]
[    6.170903@0] create workqueue success!
[    7.864940@0] meson6-dwmac ff3f0000.ethernet eth0: Link is Up - 100Mbps/Full - flow control rx/tx
[    7.868230@0] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[   27.120977@1] uart trans dev open.
[   27.121086@1] uart_buf virt addr = 0xffffffc00b1c0000
[   27.123789@1] uart_buf phys addr = 0x0b1c0000
[   27.128167@1] uart_buf pfn       = 0x0000b1c0
[   27.132969@1] uart trans stop send work timer.
[   27.137100@1] uart trans set chain exist bits:0x7.
[   27.141671@1] uart trans set work queue count 768.
[   84.466538@2] uart set baud to: 4098
[   84.466598@2] uart set baud to: 4098
[   84.468061@2] uart set baud to: 4098
[  100.783277@2] meson_uart ff804000.serial: ttyS3 use xtal(24M) 24000000 change 115200 to 3000000
[  100.786399@2] uart set baud to: 4109
[  100.850567@3] meson_uart ffd23000.serial: ttyS2 use xtal(24M) 24000000 change 115200 to 3000000
[  100.853696@3] uart set baud to: 4109
[  100.917758@3] meson_uart ffd24000.serial: ttyS1 use xtal(24M) 24000000 change 115200 to 3000000
[  100.920905@3] uart set baud to: 4109
[  154.911571@3] uart trans start send work timer.


===========================================Miner log===========================================
2015-01-01 00:00:15 Open miner sn file /config/sn error
2015-01-01 00:00:15 Miner compile time: Mon Dec 26 17:10:01 CST 2022 type: Antminer BHB42XXX sn :
2015-01-01 00:00:16 This is fix-freq version
2015-01-01 00:00:16 Miner compile time: Mon Dec 26 17:10:01 CST 2022 type: Antminer BHB42XXX
2015-01-01 00:00:16 commit version: f2ab6bc 2022-12-26 17:08:34, build by: jenkins 2022-12-26 17:22:17
2015-01-01 00:00:16 opt_multi_version     = 1
2015-01-01 00:00:16 opt_bitmain_ab        = 1
2015-01-01 00:00:16 mid_auto_gen          = 1
2015-01-01 00:00:16 opt_bitmain_work_mode = 0
2015-01-01 00:00:16 port 439 already exported
2015-01-01 00:00:16 port 454 already exported
2015-01-01 00:00:16 port 440 already exported
2015-01-01 00:00:16 port 455 already exported
2015-01-01 00:00:16 port 441 already exported
2015-01-01 00:00:16 port 456 already exported
2015-01-01 00:00:16 port 438 already exported
2015-01-01 00:00:16 port 453 already exported
2015-01-01 00:00:16 port 446 already exported
2015-01-01 00:00:16 port 445 already exported
2015-01-01 00:00:16 Note: front fan is power on!
2015-01-01 00:00:16 Note: rear fan is power on!
2015-01-01 00:00:16 start the http log.
2015-01-01 00:00:16 start listen on 6060 ...
2015-01-01 00:00:16 httpListenThread start ret=0
2015-01-01 00:00:16 bad chain id = 3
2015-01-01 00:00:19 bad chain id = 3
2015-01-01 00:00:21 ==========================capability start==========================
2015-01-01 00:00:21 board num = 3
2015-01-01 00:00:21 board id = 0, chain num = 1
2015-01-01 00:00:21 	chain id = 0
2015-01-01 00:00:21 board id = 1, chain num = 1
2015-01-01 00:00:21 	chain id = 1
2015-01-01 00:00:21 board id = 2, chain num = 1
2015-01-01 00:00:21 	chain id = 2
2015-01-01 00:00:21 ==========================capability end============================
2015-01-01 00:00:21 chain num = 3
2015-01-01 00:00:22 skip loading levels for now
2015-01-01 00:00:25 load chain 0 eeprom data
2015-01-01 00:00:28 load chain 1 eeprom data
2015-01-01 00:00:31 load chain 2 eeprom data
2015-01-01 00:00:31 miner type: Antminer S19
2015-01-01 00:00:31 multi machine mode
2015-01-01 00:00:31 load machine BHB42841 conf
2015-01-01 00:00:31 machine : BHB42841 
2015-01-01 00:00:31 chain_num 4, chain_domain_num 42, chain_asic_num 126, domain_asic_num 3
2015-01-01 00:00:31 abandon mix board!
2015-01-01 00:00:31 abandon mix board!
2015-01-01 00:00:31 fan_eft : 0  fan_pwm : 100
2015-01-01 00:00:31 create thread get_nonce_and_register_thread
2015-01-01 00:00:31 fixed working voltage = 1440
2015-01-01 00:00:31 fixed frequency is 475
2015-01-01 00:00:31 Chain [0] PCB Version: 0x0130
2015-01-01 00:00:31 Chain [0] BOM Version: 0x0010
2015-01-01 00:00:31 Chain [1] PCB Version: 0x0130
2015-01-01 00:00:31 Chain [1] BOM Version: 0x0010
2015-01-01 00:00:31 Chain [2] PCB Version: 0x0130
2015-01-01 00:00:31 Chain [2] BOM Version: 0x0010
2015-01-01 00:00:31 bad chain id = 3
2015-01-01 00:00:31 Fan check passed.
2015-01-01 00:00:31 uart_trans addr:0xf734b000.
2015-01-01 00:00:31 max sensor num = 4
2015-01-01 00:00:31 STATUS_INITED: soc init done!
2015-01-01 00:00:31 temperature_monitor_thread start...
2023-05-27 16:47:29 start to init...
2023-05-27 16:47:29 i2c_sim_init start
2023-05-27 16:47:29 init gpio477
2023-05-27 16:47:29 init gpio476
2023-05-27 16:47:29 i2c_sim_init end
2023-05-27 16:47:30 power open power_version = 0x76
2023-05-27 16:47:33 power is not Calibrated
2023-05-27 16:47:33 warning:power is not calibration.
2023-05-27 16:47:34 power type version: 0x0076
2023-05-27 16:47:35 disable power watchdog: 0x0000
2023-05-27 16:47:36 Initializing the power, please wait, this may take up to 2 minutes...
2023-05-27 16:48:07 Slept 30 seconds, diff = 1.
2023-05-27 16:48:11 set_voltage_by_steps to 1500.
2023-05-27 16:48:21 start up min temp by 75a = 31
2023-05-27 16:48:24 Chain[0]: find 126 asic, times 0
2023-05-27 16:48:26 Chain[1]: find 126 asic, times 0
2023-05-27 16:48:28 Chain[2]: find 126 asic, times 0
2023-05-27 16:48:33 pulse_mode = 1, ccdly_sel = 0, pwth_sel = 1
2023-05-27 16:48:37 Bring up temperature is 32
2023-05-27 16:48:37 set UART baud to 3000000
2023-05-27 16:48:37 create thread check_miner_status_thread
2023-05-27 16:48:37 create thread check_system_work_thread
2023-05-27 16:48:37 set_voltage_by_steps to 1450.
2023-05-27 16:48:40 pulse_mode = 1, ccdly_sel = 0, pwth_sel = 1
2023-05-27 16:48:40 start do_core_reset
2023-05-27 16:48:59 end do_core_reset
2023-05-27 16:48:59 chain[0] min = 475 max =475
2023-05-27 16:48:59 chain[1] min = 475 max =475
2023-05-27 16:48:59 chain[2] min = 475 max =475
2023-05-27 16:48:59 1.inc all chain freq to 475
2023-05-27 16:48:59 fixed step freq_start = 50, freq_end = 475, freq_step = 6.25
2023-05-27 16:48:59 chain = 0 set freq to 56.25
2023-05-27 16:48:59 chain = 1 set freq to 56.25
2023-05-27 16:48:59 chain = 2 set freq to 56.25
2023-05-27 16:48:59 chain = 0 set freq to 62.50
2023-05-27 16:48:59 chain = 1 set freq to 62.50
2023-05-27 16:48:59 chain = 2 set freq to 62.50
2023-05-27 16:48:59 chain = 0 set freq to 68.75
2023-05-27 16:48:59 chain = 1 set freq to 68.75
2023-05-27 16:48:59 chain = 2 set freq to 68.75
2023-05-27 16:49:00 chain = 0 set freq to 75.00
2023-05-27 16:49:00 chain = 1 set freq to 75.00
2023-05-27 16:49:00 chain = 2 set freq to 75.00
2023-05-27 16:49:00 chain = 0 set freq to 81.25
2023-05-27 16:49:00 chain = 1 set freq to 81.25
2023-05-27 16:49:00 chain = 2 set freq to 81.25
2023-05-27 16:49:00 chain = 0 set freq to 87.50
2023-05-27 16:49:00 chain = 1 set freq to 87.50
2023-05-27 16:49:00 chain = 2 set freq to 87.50
2023-05-27 16:49:00 chain = 0 set freq to 93.75
2023-05-27 16:49:00 chain = 1 set freq to 93.75
2023-05-27 16:49:00 chain = 2 set freq to 93.75
2023-05-27 16:49:01 chain = 0 set freq to 100.00
2023-05-27 16:49:01 chain = 1 set freq to 100.00
2023-05-27 16:49:01 chain = 2 set freq to 100.00
2023-05-27 16:49:01 chain = 0 set freq to 106.25
2023-05-27 16:49:01 chain = 1 set freq to 106.25
2023-05-27 16:49:01 chain = 2 set freq to 106.25
2023-05-27 16:49:01 chain = 0 set freq to 112.50
2023-05-27 16:49:01 chain = 1 set freq to 112.50
2023-05-27 16:49:01 chain = 2 set freq to 112.50
2023-05-27 16:49:02 chain = 0 set freq to 118.75
2023-05-27 16:49:02 chain = 1 set freq to 118.75
2023-05-27 16:49:02 chain = 2 set freq to 118.75
2023-05-27 16:49:02 chain = 0 set freq to 125.00
2023-05-27 16:49:02 chain = 1 set freq to 125.00
2023-05-27 16:49:02 chain = 2 set freq to 125.00
2023-05-27 16:49:02 chain = 0 set freq to 131.25
2023-05-27 16:49:02 chain = 1 set freq to 131.25
2023-05-27 16:49:02 chain = 2 set freq to 131.25
2023-05-27 16:49:03 chain = 0 set freq to 137.50
2023-05-27 16:49:03 chain = 1 set freq to 137.50
2023-05-27 16:49:03 chain = 2 set freq to 137.50
2023-05-27 16:49:03 chain = 0 set freq to 143.75
2023-05-27 16:49:03 chain = 1 set freq to 143.75
2023-05-27 16:49:03 chain = 2 set freq to 143.75
2023-05-27 16:49:03 chain = 0 set freq to 150.00
2023-05-27 16:49:03 chain = 1 set freq to 150.00
2023-05-27 16:49:03 chain = 2 set freq to 150.00
2023-05-27 16:49:03 chain = 0 set freq to 156.25
2023-05-27 16:49:03 chain = 1 set freq to 156.25
2023-05-27 16:49:03 chain = 2 set freq to 156.25
2023-05-27 16:49:04 chain = 0 set freq to 162.50
2023-05-27 16:49:04 chain = 1 set freq to 162.50
2023-05-27 16:49:04 chain = 2 set freq to 162.50
2023-05-27 16:49:04 chain = 0 set freq to 168.75
2023-05-27 16:49:04 chain = 1 set freq to 168.75
2023-05-27 16:49:04 chain = 2 set freq to 168.75
2023-05-27 16:49:04 chain = 0 set freq to 175.00
2023-05-27 16:49:04 chain = 1 set freq to 175.00
2023-05-27 16:49:04 chain = 2 set freq to 175.00
2023-05-27 16:49:05 chain = 0 set freq to 181.25
2023-05-27 16:49:05 chain = 1 set freq to 181.25
2023-05-27 16:49:05 chain = 2 set freq to 181.25
2023-05-27 16:49:05 chain = 0 set freq to 187.50
2023-05-27 16:49:05 chain = 1 set freq to 187.50
2023-05-27 16:49:05 chain = 2 set freq to 187.50
2023-05-27 16:49:05 chain = 0 set freq to 193.75
2023-05-27 16:49:05 chain = 1 set freq to 193.75
2023-05-27 16:49:05 chain = 2 set freq to 193.75
2023-05-27 16:49:06 chain = 0 set freq to 200.00
2023-05-27 16:49:06 chain = 1 set freq to 200.00
2023-05-27 16:49:06 chain = 2 set freq to 200.00
2023-05-27 16:49:06 chain = 0 set freq to 206.25
2023-05-27 16:49:06 chain = 1 set freq to 206.25
2023-05-27 16:49:06 chain = 2 set freq to 206.25
2023-05-27 16:49:06 chain = 0 set freq to 212.50
2023-05-27 16:49:06 chain = 1 set freq to 212.50
2023-05-27 16:49:06 chain = 2 set freq to 212.50
2023-05-27 16:49:06 chain = 0 set freq to 218.75
2023-05-27 16:49:06 chain = 1 set freq to 218.75
2023-05-27 16:49:06 chain = 2 set freq to 218.75
2023-05-27 16:49:07 chain = 0 set freq to 225.00
2023-05-27 16:49:07 chain = 1 set freq to 225.00
2023-05-27 16:49:07 chain = 2 set freq to 225.00
2023-05-27 16:49:07 chain = 0 set freq to 231.25
2023-05-27 16:49:07 chain = 1 set freq to 231.25
2023-05-27 16:49:07 chain = 2 set freq to 231.25
2023-05-27 16:49:07 chain = 0 set freq to 237.50
2023-05-27 16:49:07 chain = 1 set freq to 237.50
2023-05-27 16:49:07 chain = 2 set freq to 237.50
2023-05-27 16:49:08 chain = 0 set freq to 243.75
2023-05-27 16:49:08 chain = 1 set freq to 243.75
2023-05-27 16:49:08 chain = 2 set freq to 243.75
2023-05-27 16:49:08 chain = 0 set freq to 250.00
2023-05-27 16:49:08 chain = 1 set freq to 250.00
2023-05-27 16:49:08 chain = 2 set freq to 250.00
2023-05-27 16:49:08 chain = 0 set freq to 256.25
2023-05-27 16:49:08 chain = 1 set freq to 256.25
2023-05-27 16:49:08 chain = 2 set freq to 256.25
2023-05-27 16:49:09 chain = 0 set freq to 262.50
2023-05-27 16:49:09 chain = 1 set freq to 262.50
2023-05-27 16:49:09 chain = 2 set freq to 262.50
2023-05-27 16:49:09 chain = 0 set freq to 268.75
2023-05-27 16:49:09 chain = 1 set freq to 268.75
2023-05-27 16:49:09 chain = 2 set freq to 268.75
2023-05-27 16:49:09 chain = 0 set freq to 275.00
2023-05-27 16:49:09 chain = 1 set freq to 275.00
2023-05-27 16:49:09 chain = 2 set freq to 275.00
2023-05-27 16:49:10 chain = 0 set freq to 281.25
2023-05-27 16:49:10 chain = 1 set freq to 281.25
2023-05-27 16:49:10 chain = 2 set freq to 281.25
2023-05-27 16:49:10 chain = 0 set freq to 287.50
2023-05-27 16:49:10 chain = 1 set freq to 287.50
2023-05-27 16:49:10 chain = 2 set freq to 287.50
2023-05-27 16:49:10 chain = 0 set freq to 293.75
2023-05-27 16:49:10 chain = 1 set freq to 293.75
2023-05-27 16:49:10 chain = 2 set freq to 293.75
2023-05-27 16:49:10 chain = 0 set freq to 300.00
2023-05-27 16:49:10 chain = 1 set freq to 300.00
2023-05-27 16:49:10 chain = 2 set freq to 300.00
2023-05-27 16:49:11 chain = 0 set freq to 306.25
2023-05-27 16:49:11 chain = 1 set freq to 306.25
2023-05-27 16:49:11 chain = 2 set freq to 306.25
2023-05-27 16:49:11 chain = 0 set freq to 312.50
2023-05-27 16:49:11 chain = 1 set freq to 312.50
2023-05-27 16:49:11 chain = 2 set freq to 312.50
2023-05-27 16:49:11 chain = 0 set freq to 318.75
2023-05-27 16:49:11 chain = 1 set freq to 318.75
2023-05-27 16:49:11 chain = 2 set freq to 318.75
2023-05-27 16:49:12 chain = 0 set freq to 325.00
2023-05-27 16:49:12 chain = 1 set freq to 325.00
2023-05-27 16:49:12 chain = 2 set freq to 325.00
2023-05-27 16:49:12 chain = 0 set freq to 331.25
2023-05-27 16:49:12 chain = 1 set freq to 331.25
2023-05-27 16:49:12 chain = 2 set freq to 331.25
2023-05-27 16:49:12 chain = 0 set freq to 337.50
2023-05-27 16:49:12 chain = 1 set freq to 337.50
2023-05-27 16:49:12 chain = 2 set freq to 337.50
2023-05-27 16:49:13 chain = 0 set freq to 343.75
2023-05-27 16:49:13 chain = 1 set freq to 343.75
2023-05-27 16:49:13 chain = 2 set freq to 343.75
2023-05-27 16:49:13 chain = 0 set freq to 350.00
2023-05-27 16:49:13 chain = 1 set freq to 350.00
2023-05-27 16:49:13 chain = 2 set freq to 350.00
2023-05-27 16:49:13 chain = 0 set freq to 356.25
2023-05-27 16:49:13 chain = 1 set freq to 356.25
2023-05-27 16:49:13 chain = 2 set freq to 356.25
2023-05-27 16:49:13 chain = 0 set freq to 362.50
2023-05-27 16:49:13 chain = 1 set freq to 362.50
2023-05-27 16:49:13 chain = 2 set freq to 362.50
2023-05-27 16:49:14 chain = 0 set freq to 368.75
2023-05-27 16:49:14 chain = 1 set freq to 368.75
2023-05-27 16:49:14 chain = 2 set freq to 368.75
2023-05-27 16:49:14 chain = 0 set freq to 375.00
2023-05-27 16:49:14 chain = 1 set freq to 375.00
2023-05-27 16:49:14 chain = 2 set freq to 375.00
2023-05-27 16:49:14 chain = 0 set freq to 381.25
2023-05-27 16:49:14 chain = 1 set freq to 381.25
2023-05-27 16:49:14 chain = 2 set freq to 381.25
2023-05-27 16:49:15 chain = 0 set freq to 387.50
2023-05-27 16:49:15 chain = 1 set freq to 387.50
2023-05-27 16:49:15 chain = 2 set freq to 387.50
2023-05-27 16:49:15 chain = 0 set freq to 393.75
2023-05-27 16:49:15 chain = 1 set freq to 393.75
2023-05-27 16:49:15 chain = 2 set freq to 393.75
2023-05-27 16:49:15 chain = 0 set freq to 400.00
2023-05-27 16:49:15 chain = 1 set freq to 400.00
2023-05-27 16:49:15 chain = 2 set freq to 400.00
2023-05-27 16:49:16 chain = 0 set freq to 406.25
2023-05-27 16:49:16 chain = 1 set freq to 406.25
2023-05-27 16:49:16 chain = 2 set freq to 406.25
2023-05-27 16:49:16 chain = 0 set freq to 412.50
2023-05-27 16:49:16 chain = 1 set freq to 412.50
2023-05-27 16:49:16 chain = 2 set freq to 412.50
2023-05-27 16:49:16 chain = 0 set freq to 418.75
2023-05-27 16:49:16 chain = 1 set freq to 418.75
2023-05-27 16:49:16 chain = 2 set freq to 418.75
2023-05-27 16:49:16 chain = 0 set freq to 425.00
2023-05-27 16:49:16 chain = 1 set freq to 425.00
2023-05-27 16:49:16 chain = 2 set freq to 425.00
2023-05-27 16:49:17 chain = 0 set freq to 431.25
2023-05-27 16:49:17 chain = 1 set freq to 431.25
2023-05-27 16:49:17 chain = 2 set freq to 431.25
2023-05-27 16:49:17 chain = 0 set freq to 437.50
2023-05-27 16:49:17 chain = 1 set freq to 437.50
2023-05-27 16:49:17 chain = 2 set freq to 437.50
2023-05-27 16:49:17 chain = 0 set freq to 443.75
2023-05-27 16:49:17 chain = 1 set freq to 443.75
2023-05-27 16:49:17 chain = 2 set freq to 443.75
2023-05-27 16:49:18 chain = 0 set freq to 450.00
2023-05-27 16:49:18 chain = 1 set freq to 450.00
2023-05-27 16:49:18 chain = 2 set freq to 450.00
2023-05-27 16:49:18 chain = 0 set freq to 456.25
2023-05-27 16:49:18 chain = 1 set freq to 456.25
2023-05-27 16:49:18 chain = 2 set freq to 456.25
2023-05-27 16:49:18 chain = 0 set freq to 462.50
2023-05-27 16:49:18 chain = 1 set freq to 462.50
2023-05-27 16:49:18 chain = 2 set freq to 462.50
2023-05-27 16:49:19 chain = 0 set freq to 468.75
2023-05-27 16:49:19 chain = 1 set freq to 468.75
2023-05-27 16:49:19 chain = 2 set freq to 468.75
2023-05-27 16:49:19 chain = 0 set freq to 475.00
2023-05-27 16:49:19 chain = 1 set freq to 475.00
2023-05-27 16:49:19 chain = 2 set freq to 475.00
2023-05-27 16:49:19 enter mixed freq cfg
2023-05-27 16:49:19 pulse_mode = 1, ccdly_sel = 0, pwth_sel = 1
2023-05-27 16:49:19 start do_core_reset
2023-05-27 16:49:19 end do_core_reset
2023-05-27 16:49:29 set_voltage_by_steps to 1440.
2023-05-27 16:49:31 create thread pic_heart_beat_thread
2023-05-27 16:49:31 Init done!
2023-05-27 16:49:31 STATUS_OKAY
2023-05-27 16:49:31 start the cached job
2023-05-27 16:49:31 Version num 65536
2023-05-27 16:49:31 Mask num 0x1fffe000
2023-05-27 16:49:31 opt_multi_version = 65536, interval timeout = 3255132
2023-05-27 16:49:31 freq = 475, percent = 90, hcn = 5518, timeout = 3255132
2023-05-27 16:49:31 set_start_time_point total_tv_start_sys=155 total_tv_end_sys=156
2023-05-27 16:49:32 enable power watchdog: 0x0001
2023-05-27 16:49:41 !!! reg crc error
2023-05-27 16:49:41 !!! reg crc error