The miner is not hashing

This is the error showing in the kernal and it was new machine i bought from bitmain and the serial number which i checked got 250 days plus warranty. 

[    0.000000@0] Booting Linux on physical CPU 0x0
[    0.000000@0] Linux version 4.9.113 (jenkins@nomd-nomd-fwc-bj) (gcc version 6.3.1 20170109 (Linaro GCC 6.3-2017.02) ) #1 SMP PREEMPT Wed Apr 27 15:38:00 CST 2022
[    0.000000@0] Boot CPU: AArch64 Processor [410fd034]
[    0.000000@0] earlycon: aml_uart0 at MMIO 0x00000000ff803000 (options '')
[    0.000000@0] bootconsole [aml_uart0] enabled
[    0.000000@0] efi: Getting EFI parameters from FDT:
[    0.000000@0] efi: UEFI not found.
[    0.000000@0] 	07400000 - 07500000,     1024 KB, ramoops@0x07400000
[    0.000000@0] __reserved_mem_alloc_size, start:0x0000000005000000, end:0x0000000005400000, len:4 MiB
[    0.000000@0] 	05000000 - 05400000,     4096 KB, linux,secmon
[    0.000000@0] __reserved_mem_alloc_size, start:0x000000003e000000, end:0x0000000040000000, len:32 MiB
[    0.000000@0] failed to allocate memory for node linux,meson-fb, size:32 MB
[    0.000000@0] cma: Reserved 16 MiB at 0x000000000f000000
[    0.000000@0] On node 0 totalpages: 65536
[    0.000000@0]   DMA zone: 1024 pages used for memmap
[    0.000000@0]   DMA zone: 0 pages reserved
[    0.000000@0]   DMA zone: 65536 pages, LIFO batch:15
[    0.000000@0] psci: probing for conduit method from DT.
[    0.000000@0] psci: PSCIv1.0 detected in firmware.
[    0.000000@0] psci: Using standard PSCI v0.2 function IDs
[    0.000000@0] psci: MIGRATE_INFO_TYPE not supported.
[    0.000000@0] psci: SMC Calling Convention v1.1
[    0.000000@0] percpu: Embedded 25 pages/cpu @ffffffc00ef53000 s64536 r8192 d29672 u102400
[    0.000000@0] pcpu-alloc: s64536 r8192 d29672 u102400 alloc=25*4096
[    0.000000@0] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 
[    0.000000@0] Detected VIPT I-cache on CPU0
[    0.000000@0] CPU features: enabling workaround for ARM erratum 845719
[    0.000000@0] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 64512
[    0.000000@0] Kernel command line: init=/init console=ttyS0,115200 no_console_suspend earlycon=aml_uart,0xff803000 ramoops.pstore_en=1 ramoops.record_size=0x8000 ramoops.console_size=0x4000 logo=,loaded,androidboot.selinux=enforcing androidboot.firstboot=1 jtag=disable androidboot.hardware=amlogic androidboot.bootloader=U-Boot 2015.01 androidboot.build.expect.baseband=N/A androidboot.serialno=1234567890 rootfstype=ramfs init=/sbin/init
[    0.000000@0] PID hash table entries: 1024 (order: 1, 8192 bytes)
[    0.000000@0] Dentry cache hash table entries: 32768 (order: 6, 262144 bytes)
[    0.000000@0] Inode-cache hash table entries: 16384 (order: 5, 131072 bytes)
[    0.000000@0] Memory: 211688K/262144K available (8764K kernel code, 1194K rwdata, 2424K rodata, 3648K init, 1017K bss, 29976K reserved, 20480K cma-reserved)
[    0.000000@0] Virtual kernel memory layout:
[    0.000000@0]     modules : 0xffffff8000000000 - 0xffffff8008000000   (   128 MB)
[    0.000000@0]     vmalloc : 0xffffff8008000000 - 0xffffffbebfff0000   (   250 GB)
[    0.000000@0]       .text : 0xffffff8009080000 - 0xffffff8009910000   (  8768 KB)
[    0.000000@0]     .rodata : 0xffffff8009910000 - 0xffffff8009b80000   (  2496 KB)
[    0.000000@0]       .init : 0xffffff8009b80000 - 0xffffff8009f10000   (  3648 KB)
[    0.000000@0]       .data : 0xffffff8009f10000 - 0xffffff800a03aa00   (  1195 KB)
[    0.000000@0]        .bss : 0xffffff800a03aa00 - 0xffffff800a139034   (  1018 KB)
[    0.000000@0]     fixed   : 0xffffffbefe7fb000 - 0xffffffbefec00000   (  4116 KB)
[    0.000000@0]     PCI I/O : 0xffffffbefee00000 - 0xffffffbeffe00000   (    16 MB)
[    0.000000@0]     vmemmap : 0xffffffbf00000000 - 0xffffffc000000000   (     4 GB maximum)
[    0.000000@0]               0xffffffbf00000000 - 0xffffffbf00400000   (     4 MB actual)
[    0.000000@0]     memory  : 0xffffffc000000000 - 0xffffffc010000000   (   256 MB)
[    0.000000@0] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[    0.000000@0] Preemptible hierarchical RCU implementation.
[    0.000000@0] 	Build-time adjustment of leaf fanout to 64.
[    0.000000@0] 	RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=4.
[    0.000000@0] RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=4
[    0.000000@0] NR_IRQS:64 nr_irqs:64 0
[    0.000000@0] irq_meson_gpio: 100 to 8 gpio interrupt mux initialized
[    0.000000@0] axg_aoclkc_init: register ao clk ok!
[    0.000000@0] axg_amlogic_init_sdemmc: register amlogic sdemmc clk
[    0.000000@0] axg_amlogic_init_sdemmc: register amlogic sdemmc clk
[    0.000000@0] axg_amlogic_init_media: register meson media clk
[    0.000000@0] axg_amlogic_init_misc: register amlogic axg misc clks
[    0.000000@0] axg_amlogic_init_misc: register amlogic sdemmc clk
[    0.000000@0] axg_clkc_init initialization complete
[    0.000000@0] arm_arch_timer: Architected cp15 timer(s) running at 24.00MHz (phys).
[    0.000000@0] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns
[    0.000003@0] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns
[    0.008252@0] meson_bc_timer: mclk->mux_reg =ffffff800800a190,mclk->reg =ffffff800800c194
[    0.016897@0] Console: colour dummy device 80x25
[    0.021107@0] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=96000)
[    0.031586@0] pid_max: default: 32768 minimum: 301
[    0.036435@0] thread_stack_cache_init, vmap:ffffffc00e5af600, bitmap:ffffffc00e5a3000, cache page:e5e0
[    0.045772@0] thread_stack_cache_init, allocation vm area:ffffffc00e5d94c0, addr:ffffff8020000000, size:20001000
[    0.056006@0] cpu 0, vmap_stack:[ffffffc00ef5c960-ffffffc00ef60950]
[    0.062304@0] cpu 0, irq_stack: [ffffffc00ef53060-ffffffc00ef57050]
[    0.068604@0] cpu 1, vmap_stack:[ffffffc00ef75960-ffffffc00ef79950]
[    0.074904@0] cpu 1, irq_stack: [ffffffc00ef6c060-ffffffc00ef70050]
[    0.081204@0] cpu 2, vmap_stack:[ffffffc00ef8e960-ffffffc00ef92950]
[    0.087504@0] cpu 2, irq_stack: [ffffffc00ef85060-ffffffc00ef89050]
[    0.093804@0] cpu 3, vmap_stack:[ffffffc00efa7960-ffffffc00efab950]
[    0.100104@0] cpu 3, irq_stack: [ffffffc00ef9e060-ffffffc00efa2050]
[    0.106464@0] Security Framework initialized
[    0.110696@0] SELinux:  Initializing.
[    0.114387@0] SELinux:  Starting in permissive mode
[    0.114424@0] Mount-cache hash table entries: 512 (order: 0, 4096 bytes)
[    0.121108@0] Mountpoint-cache hash table entries: 512 (order: 0, 4096 bytes)
[    0.128836@0] ftrace: allocating 30061 entries in 118 pages
[    0.186232@0] sched-energy: CPU device node has no sched-energy-costs
[    0.187041@0] CPU0: update cpu_capacity 1024
[    0.191368@0] ASID allocator initialised with 32768 entries
[    0.229506@0] secmon: can't fine clear_range
[    0.229710@0] EFI services will not be available.
[    0.232972@0] Meson chip version = RevC (25:C - 23:0)
[    0.266643@1] Detected VIPT I-cache on CPU1
[    0.266701@1] CPU1: update cpu_capacity 1024
[    0.266704@1] CPU1: Booted secondary processor [410fd034]
[    0.294702@2] Detected VIPT I-cache on CPU2
[    0.294755@2] CPU2: update cpu_capacity 1024
[    0.294758@2] CPU2: Booted secondary processor [410fd034]
[    0.322775@3] Detected VIPT I-cache on CPU3
[    0.322827@3] CPU3: update cpu_capacity 1024
[    0.322829@3] CPU3: Booted secondary processor [410fd034]
[    0.322919@0] Brought up 4 CPUs
[    0.362136@0] SMP: Total of 4 processors activated.
[    0.367045@0] CPU features: detected feature: 32-bit EL0 Support
[    0.373081@0] CPU features: detected feature: Kernel page table isolation (KPTI)
[    0.383637@0] CPU: All CPU(s) started at EL2
[    0.384821@0] alternatives: patching kernel code
[    0.390124@1] addr:ffffff802007be10 is in kernel, size fix 4096->10, data:mode=0755
[    0.397347@0] devtmpfs: initialized
[    0.412353@0] DMI not present or invalid.
[    0.412760@0] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[    0.420722@0] futex hash table entries: 1024 (order: 4, 65536 bytes)
[    0.427296@0] pinctrl core: initialized pinctrl subsystem
[    0.433685@0] NET: Registered protocol family 16
[    0.457250@0] cpuidle: using governor menu
[    0.457739@0] vdso: 2 pages (1 code @ ffffff8009917000, 1 data @ ffffff8009f14000)
[    0.463361@0] hw-breakpoint: found 6 breakpoint and 2 watchpoint registers.
[    0.470771@0] DMA: preallocated 256 KiB pool for atomic allocations
[    0.476941@0] clkmsr: clkmsr: driver init
[    0.480958@0] aml_watch_point_probe, in, wp:2
[    0.485534@0] pstore: using zlib compression
[    0.489809@0] console [pstore-1] enabled
[    0.493238@0] pstore: Registered ramoops as persistent store backend
[    0.499646@0] ramoops: attached 0x100000@0x7400000, ecc: 0/0
[    0.514005@0] aml_iomap: amlogic iomap probe done
[    0.520848@0] clkmsr: msr_clk_reg0=ffffff800817e004,msr_clk_reg2=ffffff80081d100c
[    0.522789@0] clkmsr ffd18004.meson_clk_msr: failed to get msr ring reg0
[    0.616027@0] usbcore: registered new interface driver usbfs
[    0.616194@0] usbcore: registered new interface driver hub
[    0.621804@0] usbcore: registered new device driver usb
[    0.627089@0] pps_core: LinuxPPS API ver. 1 registered
[    0.632028@0] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[    0.641420@0] PTP clock support registered
[    0.645771@0] dmi: Firmware registration failed.
[    0.654571@0] secmon: reserve_mem_size:0x300000
[    0.654743@0] secmon secmon: assigned reserved memory node linux,secmon
[    0.661697@0] secmon: get page:ffffffbf00140000, 5000
[    0.666407@0] secmon: share in base: 0xffffffc0050fe000, share out base: 0xffffffc0050ff000
[    0.674801@0] secmon: phy_in_base: 0x50fe000, phy_out_base: 0x50ff000
[    0.682664@0] NetLabel: Initializing
[    0.684838@0] NetLabel:  domain hash size = 128
[    0.689426@0] NetLabel:  protocols = UNLABELED CIPSOv4
[    0.694656@0] NetLabel:  unlabeled traffic allowed by default
[    0.701253@0] clocksource: Switched to clocksource arch_sys_counter
[    0.828155@0] VFS: Disk quotas dquot_6.6.0
[    0.828300@0] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    0.854243@2] NET: Registered protocol family 2
[    0.855299@2] TCP established hash table entries: 2048 (order: 2, 16384 bytes)
[    0.860523@2] TCP bind hash table entries: 2048 (order: 3, 32768 bytes)
[    0.867165@2] TCP: Hash tables configured (established 2048 bind 2048)
[    0.873742@2] UDP hash table entries: 256 (order: 1, 8192 bytes)
[    0.879703@2] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
[    0.886454@2] NET: Registered protocol family 1
[    0.891386@2] RPC: Registered named UNIX socket transport module.
[    0.896832@2] RPC: Registered udp transport module.
[    0.901725@2] RPC: Registered tcp transport module.
[    0.906615@2] RPC: Registered tcp NFSv4.1 backchannel transport module.
[    0.915765@2] Unpacking initramfs...
[    1.415757@2] Initramfs unpacking failed: junk in compressed archive
[    1.422604@2] Freeing initrd memory: 6572K
[    1.423496@2] hw perfevents: clusterb_enabled = 0
[    1.425826@2] hw perfevents: cpumasks 0xf, 0x0
[    1.430311@2] hw perfevents: cluster A irq = 7
[    1.434872@2] hw perfevents: enabled with armv8_pmuv3 PMU driver, 7 counters available
[    1.444960@2] audit: initializing netlink subsys (disabled)
[    1.448393@2] audit: type=2000 audit(1.260:1): initialized
[    1.455625@2] workingset: timestamp_bits=62 max_order=16 bucket_order=0
[    1.479828@2] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[    1.482780@2] NFS: Registering the id_resolver key type
[    1.485547@2] Key type id_resolver registered
[    1.489859@2] Key type id_legacy registered
[    1.494503@2] fuse init (API version 7.26)
[    1.499912@2] SELinux:  Registering netfilter hooks
[    1.506130@2] NET: Registered protocol family 38
[    1.506192@2] Key type asymmetric registered
[    1.509438@2] Asymmetric key parser 'x509' registered
[    1.514915@2] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 248)
[    1.522134@2] io scheduler noop registered (default)
[    1.527179@2] io scheduler deadline registered
[    1.531903@2] io scheduler cfq registered
[    1.552516@0] random: fast init done
[    1.552613@0] random: crng init done
[    1.554077@2] Unable to detect cache hierarchy for CPU 0
[    1.599604@2] loop: module loaded
[    1.605124@2] zram: Added device: zram0
[    1.605631@2] mtdoops: mtd device (mtddev=name/number) must be supplied
[    1.610545@2] libphy: Fixed MDIO Bus: probed
[    1.615186@2] tun: Universal TUN/TAP device driver, 1.6
[    1.619559@2] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[    1.627718@2]  ee eth reset:Addr = ffffff80081fd008
[    1.635258@2] meson6-dwmac ff3f0000.ethernet: no reset control found
[    1.637190@2] stmmac - user ID: 0x11, Synopsys ID: 0x37
[    1.642465@2]  Ring mode enabled
[    1.645696@2]  DMA HW capability register supported
[    1.650412@2]  Normal descriptors
[    1.653743@2]  RX Checksum Offload Engine supported
[    1.658637@2] 	COE Type 2
[    1.661259@2]  TX Checksum insertion supported
[    1.665721@2]  Wake-Up On Lan supported
[    1.669677@2]  Enable RX Mitigation via HW Watchdog Timer
[    1.683085@2] libphy: stmmac: probed
[    1.683136@2] eth%d: PHY ID 0007c0f1 at 0 IRQ POLL (stmmac-0:00) active
[    1.689648@2] PPP generic driver version 2.4.2
[    1.692527@2] PPP BSD Compression module registered
[    1.697070@2] PPP Deflate Compression module registered
[    1.702324@2] PPP MPPE Compression module registered
[    1.707299@2] NET: Registered protocol family 24
[    1.712771@2] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    1.718693@2] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    1.725750@2] usbcore: registered new interface driver cdc_acm
[    1.730929@2] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
[    1.739374@2] usbcore: registered new interface driver usbserial
[    1.746048@0] mousedev: PS/2 mouse device common for all mice
[    1.751492@0] usbcore: registered new interface driver xpad
[    1.756906@2] i2c /dev entries driver
[    1.761750@2] cpu cpu0: bL_cpufreq_init: CPU 0 initialized
[    1.765935@2] arm_big_little: bL_cpufreq_register: Registered platform driver: scpi
[    1.776789@2] ff803000.serial: clock gate not found
[    1.778445@2] meson_uart ff803000.serial: ==uart0 reg addr = ffffff800830d000
[    1.785631@2] ff803000.serial: ttyS0 at MMIO 0xff803000 (irq = 13, base_baud = 1500000) is a meson_uart
[    1.800548@2] meson_uart ff803000.serial: ttyS0 use xtal(24M) 24000000 change 0 to 115200
[    1.803251@2] console [ttyS0] enabled
[    1.810477@2] bootconsole [aml_uart0] disabled
[    1.820128@3] ff804000.serial: clock gate not found
[    1.824255@3] meson_uart ff804000.serial: ==uart3 reg addr = ffffff8008321000
[    1.831381@3] ff804000.serial: ttyS3 at MMIO 0xff804000 (irq = 14, base_baud = 1500000) is a meson_uart
[    1.841763@1] meson_uart ffd24000.serial: ==uart1 reg addr = ffffff8008323000
[    1.847861@1] ffd24000.serial: ttyS1 at MMIO 0xffd24000 (irq = 25, base_baud = 1500000) is a meson_uart
[    1.858044@2] meson_uart ffd23000.serial: ==uart2 reg addr = ffffff8008325000
[    1.864314@2] ffd23000.serial: ttyS2 at MMIO 0xffd23000 (irq = 26, base_baud = 1500000) is a meson_uart
[    1.875265@0] amlogic-new-usb2 ffe09000.usb2phy: USB2 phy probe:phy_mem:0xffe09000, iomap phy_base:0xffffff8008348000
[    1.884644@0] amlogic-new-usb3 ffe09080.usb3phy: This phy has no usb port
[    1.891091@0] amlogic-new-usb3 ffe09080.usb3phy: USB3 phy probe:phy_mem:0xffe09080, iomap phy_base:0xffffff800834c080
[    1.906047@3] i2c i2c-1: of_i2c: modalias failure on /soc/aobus@ff800000/i2c@5000/mcu6350@40
[    1.909930@3] i2c i2c-1: Failed to create I2C device for /soc/aobus@ff800000/i2c@5000/mcu6350@40
[    1.922353@3] aml_dma ff63e000.aml_dma: Aml dma
[    1.925403@3] aml_aes_dma ff63e000.aml_dma:aml_aes: Aml AES_dma
[    1.930390@3] aml_sha_dma ff63e000.aml_dma:aml_sha: Aml SHA1/SHA224/SHA256 dma
[    1.936807@3] efusekeynum: 4
[    1.939153@3] efusekeyname:             mac	offset:     0	size:     6
[    1.945537@3] efusekeyname:          mac_bt	offset:     6	size:     6
[    1.951943@3] efusekeyname:        mac_wifi	offset:    12	size:     6
[    1.958361@3] efusekeyname:            usid	offset:    18	size:    16
[    1.965189@1] efuse efuse: probe OK!
[    1.970650@1] meson-mmc: mmc driver version: 3.02, 2017-05-15: New Emmc Host Controller
[    1.977907@1] meson-mmc: >>>>>>>>hostbase ffffff8008358000, dmode 
[    1.982951@1] meson-mmc: actual_clock :400000, HHI_nand: 0x80
[    1.988164@1] meson-mmc: [meson_mmc_clk_set_rate_v3] after clock: 0x1000033c
[    2.033400@1] meson-mmc: meson_mmc_probe() : success!
[    2.033661@1] amlogic mtd driver init
[    2.037712@1] prase_get_dtb_nand_parameter:128,parse dts start
[    2.042472@1] bl mode descrete
[    2.045348@1] fip_copies 4
[    2.048012@1] fip_size 0x200000
[    2.051153@1] nand_clk_ctrl 0xffe07000
[    2.054876@1] prase_get_dtb_nand_parameter:234,parse dts end
[    2.060543@1] nand_clk_ctrl 0xffe07000
[    2.064265@1] nand register base ffffff80083df800, nand clock register ffffff80083e1000
[    2.073002@1] plat->aml_nand_device ffffff800a005c10
[    2.077194@1] m3_nand_probe() aml_nand_device ffffff800a005c10
[    2.083242@1] NAND device id: 2c da 90 95 6 0
[    2.087300@1] NAND device: Manufacturer ID: 
[    2.091366@1]  0x2c, Chip ID: 0x2c (Micron A revision NAND 2Gib MT29F2G08-A)
[    2.098408@1] oob_fill_cnt =32 oob_size =64, bch_bytes =14
[    2.103843@1] ecc mode:6 ecc_page_num=2 eep_need_oobsize=16
[    2.109391@1] plane_num=1 writesize=0x800 ecc.size=0x200 bch_mode=1
[    2.115635@1] mtd->oobavail: 0x8
[    2.119037@1] aml_nand_init 2119: plat-name:bootloader
[    2.123955@1] Creating 1 MTD partitions on "bootloader":
[    2.129300@1] 0x000000000000-0x000000200000 : "bootloader"
[    2.138116@0] bootloader initialized ok
[    2.138503@0] plat->aml_nand_device ffffff800a005c10
[    2.143480@0] m3_nand_probe() aml_nand_device ffffff800a005c10
[    2.149627@0] NAND device id: 2c da 90 95 6 0
[    2.153643@0] NAND device: Manufacturer ID: 
[    2.157669@0]  0x2c, Chip ID: 0x2c (Micron A revision NAND 2Gib MT29F2G08-A)
[    2.164711@0] oob_fill_cnt =32 oob_size =64, bch_bytes =14
[    2.170144@0] ecc mode:6 ecc_page_num=2 eep_need_oobsize=16
[    2.175697@0] plane_num=1 writesize=0x800 ecc.size=0x200 bch_mode=1
[    2.181938@0] mtd->oobavail: 0x8
[    2.185369@0] aml_nand_init 2119: plat-name:nandnormal
[    2.190284@0] bbt_start=20
[    2.192917@0] env_start=24
[    2.195621@0] key_start=32
[    2.198308@0] dtb_start=40
[    2.200976@0] ddr_start=44
[    2.203685@0] nbbt: info size=0x800 max_scan_blk=24, start_blk=20
[    2.210179@0] get_free_node 43: bitmap=0
[    2.213652@0] get_free_node 55: bitmap=1
[    2.217742@0] get_free_node 43: bitmap=1
[    2.221449@0] get_free_node 55: bitmap=3
[    2.225540@0] get_free_node 43: bitmap=3
[    2.229250@0] get_free_node 55: bitmap=7
[    2.233133@0] nbbt : phy_blk_addr=20, ec=0, phy_page_addr=0, timestamp=1
[    2.239820@0] nbbt free list:
[    2.242768@0] blockN=21, ec=-1, dirty_flag=0
[    2.247014@0] blockN=22, ec=-1, dirty_flag=0
[    2.251261@0] blockN=23, ec=-1, dirty_flag=0
[    2.255508@0] aml_nand_scan_rsv_info 1141: page_num=1
[    2.260917@0] nbbt valid addr: 280000
[    2.264177@0] aml_nand_bbt_check 1306 bbt is valid, reading.
[    2.269810@0] aml_nand_read_rsv_info:423,read nbbt info at 280000
[    2.276069@0] nenv: info size=0x10000 max_scan_blk=32, start_blk=24
[    2.282497@0] get_free_node 43: bitmap=7
[    2.286016@0] get_free_node 55: bitmap=f
[    2.290106@0] get_free_node 43: bitmap=f
[    2.293816@0] get_free_node 55: bitmap=1f
[    2.297993@0] get_free_node 43: bitmap=1f
[    2.301789@0] get_free_node 55: bitmap=3f
[    2.305967@0] get_free_node 43: bitmap=3f
[    2.309762@0] get_free_node 55: bitmap=7f
[    2.313940@0] get_free_node 43: bitmap=7f
[    2.317736@0] get_free_node 55: bitmap=ff
[    2.321914@0] get_free_node 43: bitmap=ff
[    2.325709@0] get_free_node 55: bitmap=1ff
[    2.329974@0] get_free_node 43: bitmap=1ff
[    2.333856@0] get_free_node 55: bitmap=3ff
[    2.337930@0] nenv : phy_blk_addr=24, ec=0, phy_page_addr=0, timestamp=1
[    2.344600@0] nenv free list:
[    2.347547@0] blockN=25, ec=-1, dirty_flag=0
[    2.351794@0] blockN=26, ec=-1, dirty_flag=0
[    2.356040@0] blockN=27, ec=-1, dirty_flag=0
[    2.360287@0] blockN=28, ec=-1, dirty_flag=0
[    2.364534@0] blockN=29, ec=-1, dirty_flag=0
[    2.368780@0] blockN=30, ec=-1, dirty_flag=0
[    2.373027@0] blockN=31, ec=-1, dirty_flag=0
[    2.377274@0] aml_nand_scan_rsv_info 1141: page_num=32
[    2.394528@0] nenv valid addr: 310000
[    2.394561@0] nkey: info size=0x8000 max_scan_blk=40, start_blk=32
[    2.398915@0] get_free_node 43: bitmap=3ff
[    2.402799@0] get_free_node 55: bitmap=7ff
[    2.407064@0] get_free_node 43: bitmap=7ff
[    2.410946@0] get_free_node 55: bitmap=fff
[    2.415210@0] get_free_node 43: bitmap=fff
[    2.419092@0] get_free_node 55: bitmap=1fff
[    2.423444@0] get_free_node 43: bitmap=1fff
[    2.427413@0] get_free_node 55: bitmap=3fff
[    2.431763@0] get_free_node 43: bitmap=3fff
[    2.435732@0] get_free_node 55: bitmap=7fff
[    2.440084@0] get_free_node 43: bitmap=7fff
[    2.444053@0] get_free_node 55: bitmap=ffff
[    2.448404@0] get_free_node 43: bitmap=ffff
[    2.452373@0] get_free_node 55: bitmap=1ffff
[    2.456810@0] get_free_node 43: bitmap=1ffff
[    2.460866@0] get_free_node 55: bitmap=3ffff
[    2.465110@0] nkey : phy_blk_addr=-1, ec=0, phy_page_addr=0, timestamp=0
[    2.471783@0] nkey free list:
[    2.474731@0] blockN=32, ec=-1, dirty_flag=0
[    2.478977@0] blockN=33, ec=-1, dirty_flag=0
[    2.483223@0] blockN=34, ec=-1, dirty_flag=0
[    2.487470@0] blockN=35, ec=-1, dirty_flag=0
[    2.491717@0] blockN=36, ec=-1, dirty_flag=0
[    2.495963@0] blockN=37, ec=-1, dirty_flag=0
[    2.500210@0] blockN=38, ec=-1, dirty_flag=0
[    2.504457@0] blockN=39, ec=-1, dirty_flag=0
[    2.508704@0] aml_nand_scan_rsv_info 1141: page_num=16
[    2.513817@0] nkey valid addr: fffffffffffe0000
[    2.518324@0] aml_nand_key_check 1251 NO key exist
[    2.523092@0] ndtb: info size=0x20000 max_scan_blk=44, start_blk=40
[    2.529720@0] get_free_node 43: bitmap=3ffff
[    2.533579@0] get_free_node 55: bitmap=7ffff
[    2.538017@0] get_free_node 43: bitmap=7ffff
[    2.542072@0] get_free_node 55: bitmap=fffff
[    2.546510@0] get_free_node 43: bitmap=fffff
[    2.550566@0] get_free_node 55: bitmap=1fffff
[    2.554899@0] ndtb : phy_blk_addr=40, ec=0, phy_page_addr=0, timestamp=1
[    2.561569@0] ndtb free list:
[    2.564501@0] blockN=41, ec=-1, dirty_flag=0
[    2.568764@0] blockN=42, ec=-1, dirty_flag=0
[    2.573010@0] blockN=43, ec=-1, dirty_flag=0
[    2.577257@0] aml_nand_scan_rsv_info 1141: page_num=64
[    2.594567@0] ndtb valid addr: 500000
[    2.594601@0] nddr: info size=0x20000 max_scan_blk=46, start_blk=44
[    2.599048@0] get_free_node 43: bitmap=1fffff
[    2.603190@0] get_free_node 55: bitmap=3fffff
[    2.607715@0] get_free_node 43: bitmap=3fffff
[    2.611856@0] get_free_node 55: bitmap=7fffff
[    2.616189@0] nddr : phy_blk_addr=-1, ec=0, phy_page_addr=0, timestamp=0
[    2.622860@0] nddr free list:
[    2.625808@0] blockN=44, ec=-1, dirty_flag=0
[    2.630054@0] blockN=45, ec=-1, dirty_flag=0
[    2.634301@0] aml_nand_scan_rsv_info 1141: page_num=64
[    2.639414@0] nddr valid addr: fffffffffffe0000
[    2.643921@0] aml_nand_ddr_check 1281 NO ddr exist
[    2.648691@0] tpl: off 8388608, size 8388608
[    2.780333@0] Creating 6 MTD partitions on "nandnormal":
[    2.780395@0] 0x000000800000-0x000001000000 : "tpl"
[    2.791780@3] 0x000001000000-0x000001200000 : "misc"
[    2.795121@3] 0x000001200000-0x000002200000 : "recovery"
[    2.806933@0] 0x000002200000-0x000004200000 : "boot"
[    2.826052@0] 0x000004200000-0x000004700000 : "config"
[    2.830694@0] 0x000004700000-0x000010000000 : "nvdata"
[    2.931900@1] nandnormal initialized ok
[    2.932008@1] aml_ubootenv_init: register env chardev
[    2.935524@3] aml_ubootenv_init: register env chardev OK
[    2.940577@3] amlnf_dtb_init: register dtb cdev
[    2.945370@3] amlnf_dtb_init: register dtd cdev OK
[    2.949747@3] mtd_nand_probe 267 , err = 0
[    2.954870@0] aml_vrtc rtc: rtc core: registered aml_vrtc as rtc0
[    2.960330@0] input: aml_vkeypad as /devices/platform/rtc/input/input0
[    2.967310@3] unifykey: storage in base: 0xffffffc005000000
[    2.971933@3] unifykey: storage out base: 0xffffffc005040000
[    2.977541@3] unifykey: storage block base: 0xffffffc005080000
[    2.983341@3] unifykey: probe done!
[    2.987526@3] unifykey: no efuse-version set, use default value: -1
[    2.993068@3] unifykey: key unify config unifykey-num is 6
[    2.998636@3] unifykey: key unify fact unifykey-num is 6
[    3.003804@3] unifykey: unifykey_devno: f200000
[    3.008757@1] unifykey: device unifykeys created ok
[    3.013313@1] unifykey: aml_unifykeys_init done!
[    3.018179@1] sysled: module init
[    3.021679@1] meson_wdt ffd0f0d0.watchdog: start watchdog
[    3.026441@1] meson_wdt ffd0f0d0.watchdog: creat work queue for watch dog
[    3.033883@2] meson_wdt ffd0f0d0.watchdog: AML Watchdog Timer probed done
[    3.042580@1] dmc_monitor_probe
[    3.048293@1] defendkey defendkey: Reserved memory is not enough!
[    3.049133@1] defendkey: probe of defendkey failed with error -22
[    3.055551@1] GACT probability NOT on
[    3.058870@1] Mirror/redirect action on
[    3.062661@1] u32 classifier
[    3.065504@1]     Actions configured
[    3.069046@1] Netfilter messages via NETLINK v0.30.
[    3.074347@1] nf_conntrack version 0.5.0 (2048 buckets, 8192 max)
[    3.080561@1] ctnetlink v0.93: registering with nfnetlink.
[    3.086508@1] xt_time: kernel timezone is -0000
[    3.090133@1] ipip: IPv4 and MPLS over IPv4 tunneling driver
[    3.096766@1] ip_tables: (C) 2000-2006 Netfilter Core Team
[    3.101571@1] arp_tables: arp_tables: (C) 2002 David S. Miller
[    3.106941@1] Initializing XFRM netlink socket
[    3.112452@1] NET: Registered protocol family 10
[    3.118391@1] mip6: Mobile IPv6
[    3.119009@1] ip6_tables: (C) 2000-2006 Netfilter Core Team
[    3.124987@1] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver
[    3.132971@1] NET: Registered protocol family 17
[    3.135285@1] NET: Registered protocol family 15
[    3.139851@1] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this.
[    3.153003@1] l2tp_core: L2TP core driver, V2.0
[    3.157391@1] l2tp_ppp: PPPoL2TP kernel driver, V2.0
[    3.162320@1] l2tp_ip: L2TP IP encapsulation support (L2TPv3)
[    3.168064@1] l2tp_netlink: L2TP netlink interface
[    3.172864@1] l2tp_eth: L2TP ethernet pseudowire support (L2TPv3)
[    3.178929@1] l2tp_debugfs: L2TP debugfs support
[    3.183479@1] l2tp_ip6: L2TP IP encapsulation support for IPv6 (L2TPv3)
[    3.190109@1] NET: Registered protocol family 35
[    3.195064@1] Key type dns_resolver registered
[    3.199605@1] Registered swp emulation handler
[    3.203501@1] Registered cp15_barrier emulation handler
[    3.208694@1] Registered setend emulation handler
[    3.213432@1] disable EAS feature
[    3.218106@3] registered taskstats version 1
[    3.234602@3] dwc3 ff500000.dwc3: Configuration mismatch. dr_mode forced to host
[    3.741042@3] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller
[    3.741128@3] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 1
[    3.749433@3] xhci-hcd xhci-hcd.0.auto: hcc params 0x0220f664 hci version 0x100 quirks 0x02010010
[    3.757832@3] xhci-hcd xhci-hcd.0.auto: irq 22, io mem 0xff500000
[    3.765433@2] hub 1-0:1.0: USB hub found
[    3.767750@2] hub 1-0:1.0: 1 port detected
[    3.772421@2] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller
[    3.777429@2] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 2
[    3.785348@2] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM.
[    3.794780@1] hub 2-0:1.0: USB hub found
[    3.797428@1] hub 2-0:1.0: config failed, hub doesn't have any ports! (err -19)
[    3.804705@1] usb usb2: Unsupported the hub
[    3.809488@1] aml_vrtc rtc: setting system clock to 2015-01-01 00:00:08 UTC (1420070408)
[    3.817567@1] dwc_otg ff400000.dwc2_a: dwc_otg_driver_probe(ffffffc00d19f000)
[    3.817645@1] dwc_otg: usb0: type: 2 speed: 0, config: 0, dma: 0, id: 0, phy: ffe09000, ctrl: 0
[    3.825535@1] dwc_otg ff400000.dwc2_a: base=0xffffff8008580000
[    3.825548@1] dwc_otg ff400000.dwc2_a: dwc_otg_device=0xffffffc00b41b000
[    3.926227@1] dwc_otg: Core Release: 3.10a
[    3.926283@1] dwc_otg: Setting default values for core params
[    3.930476@1] dwc_otg: curmode: 0, host_only: 0
[    3.934976@1] dwc_otg ff400000.dwc2_a: DMA config: BURST_DEFAULT
[    3.947485@1] dwc_otg: Using Buffer DMA mode
[    3.947523@1] dwc_otg: OTG VER PARAM: 1, OTG VER FLAG: 1
[    3.951428@1] dwc_otg: Working on port type = SLAVE
[    3.956285@1] dwc_otg: Dedicated Tx FIFOs mode
[    3.964032@1] thermal thermal_zone0: binding zone soc_thermal with cdev thermal-cpufreq-0 failed:-22
[    3.970005@1] cpucore_cooling_register, max_cpu_core_num:4
[    3.982544@1] gxbb_pm: enter meson_pm_probe!
[    3.982601@1] no vddio3v3_en pin
[    3.984250@1] pm-meson aml_pm: Can't get switch_clk81
[    3.989407@1] gxbb_pm: meson_pm_probe done
[    3.994286@1] meson_uart ff803000.serial: ttyS0 use xtal(24M) 24000000 change 115200 to 115200
[    4.000722@1] Freeing unused kernel memory: 3648K
[    4.014892@1] meson_uart ff803000.serial: ttyS0 use xtal(24M) 24000000 change 115200 to 115200
[    4.274630@2] ubi0: attaching mtd5
[    4.293126@2] ubi0: scanning is finished
[    4.298092@1] ubi0: attached mtd5 (name "config", size 5 MiB)
[    4.298225@1] ubi0: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes
[    4.305281@1] ubi0: min./max. I/O unit sizes: 2048/2048, sub-page size 2048
[    4.312189@1] ubi0: VID header offset: 2048 (aligned 2048), data offset: 4096
[    4.319305@1] ubi0: good PEBs: 40, bad PEBs: 0, corrupted PEBs: 0
[    4.325362@1] ubi0: user volume: 1, internal volumes: 1, max. volumes count: 128
[    4.332737@1] ubi0: max/mean erase counter: 11/5, WL threshold: 4096, image sequence number: 1780005034
[    4.342166@1] ubi0: available PEBs: 0, total reserved PEBs: 40, PEBs reserved for bad PEB handling: 4
[    4.351303@2] ubi0: background thread "ubi_bgt0d" started, PID 1076
[    4.364245@0] UBIFS (ubi0:0): background thread "ubifs_bgt0_0" started, PID 1080
[    4.380881@1] UBIFS (ubi0:0): recovery needed
[    4.423927@1] UBIFS (ubi0:0): recovery completed
[    4.424223@1] UBIFS (ubi0:0): UBIFS: mounted UBI device 0, volume 0, name "config_data"
[    4.430957@1] UBIFS (ubi0:0): LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
[    4.440972@1] UBIFS (ubi0:0): FS size: 2793472 bytes (2 MiB, 22 LEBs), journal size 1015809 bytes (0 MiB, 6 LEBs)
[    4.451194@1] UBIFS (ubi0:0): reserved for root: 131942 bytes (128 KiB)
[    4.457783@1] UBIFS (ubi0:0): media format: w4/r0 (latest is w4/r0), UUID 493F2E36-FE17-42F5-A2A8-B8018BBC9637, small LPT model
[    4.482376@2] ubi2: attaching mtd6
[    5.154052@2] ubi2: scanning is finished
[    5.161137@2] ubi2: attached mtd6 (name "nvdata", size 185 MiB)
[    5.161484@2] ubi2: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes
[    5.168475@2] ubi2: min./max. I/O unit sizes: 2048/2048, sub-page size 2048
[    5.175405@2] ubi2: VID header offset: 2048 (aligned 2048), data offset: 4096
[    5.182520@2] ubi2: good PEBs: 1480, bad PEBs: 0, corrupted PEBs: 0
[    5.188752@2] ubi2: user volume: 1, internal volumes: 1, max. volumes count: 128
[    5.196128@2] ubi2: max/mean erase counter: 2/1, WL threshold: 4096, image sequence number: 780044571
[    5.205309@2] ubi2: available PEBs: 0, total reserved PEBs: 1480, PEBs reserved for bad PEB handling: 4
[    5.214697@1] ubi2: background thread "ubi_bgt2d" started, PID 1088
[    5.228050@2] UBIFS (ubi2:0): background thread "ubifs_bgt2_0" started, PID 1092
[    5.244685@3] UBIFS (ubi2:0): recovery needed
[    5.299937@1] UBIFS (ubi2:0): recovery completed
[    5.300198@1] UBIFS (ubi2:0): UBIFS: mounted UBI device 2, volume 0, name "nvdata_data"
[    5.306993@1] UBIFS (ubi2:0): LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
[    5.316985@1] UBIFS (ubi2:0): FS size: 185384960 bytes (176 MiB, 1460 LEBs), journal size 9269248 bytes (8 MiB, 73 LEBs)
[    5.327810@1] UBIFS (ubi2:0): reserved for root: 4952683 bytes (4836 KiB)
[    5.334572@1] UBIFS (ubi2:0): media format: w4/r0 (latest is w4/r0), UUID 5E746644-E8A9-4EB1-9B79-640F36ED7497, small LPT model
[    5.546664@1] eth0: device MAC address 02:13:83:a3:bc:65
[    5.629666@1] meson6-dwmac ff3f0000.ethernet eth0: fail to init PTP.
[    5.630940@1] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[    5.844905@0] uart_trans: loading out-of-tree module taints kernel.
[    5.847338@1] register uart_trans chrdev success.
[    5.850712@1] meson_uart ff804000.serial: ttyS3 use xtal(24M) 24000000 change 0 to 9600
[    5.858280@1] tty port open success [/dev/ttyS3]!
[    5.862951@1] meson_uart ff804000.serial: ttyS3 use xtal(24M) 24000000 change 9600 to 115200
[    5.871336@1] init sucess for tty struct (246:3)  [/dev/ttyS3]
[    5.877521@1] meson_uart ffd23000.serial: ttyS2 use xtal(24M) 24000000 change 0 to 9600
[    5.885112@1] tty port open success [/dev/ttyS2]!
[    5.889794@1] meson_uart ffd23000.serial: ttyS2 use xtal(24M) 24000000 change 9600 to 115200
[    5.898186@1] init sucess for tty struct (246:2)  [/dev/ttyS2]
[    5.904291@1] meson_uart ffd24000.serial: ttyS1 use xtal(24M) 24000000 change 0 to 9600
[    5.911971@1] tty port open success [/dev/ttyS1]!
[    5.916646@1] meson_uart ffd24000.serial: ttyS1 use xtal(24M) 24000000 change 9600 to 115200
[    5.925049@1] init sucess for tty struct (246:1)  [/dev/ttyS1]
[    5.931276@1] create workqueue success!
[    7.669574@1] meson6-dwmac ff3f0000.ethernet eth0: Link is Up - 100Mbps/Full - flow control rx/tx
[    7.672864@1] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[  240.396945@0] nf_conntrack: default automatic helper assignment has been turned off for security reasons and CT-based  firewall rule not found. Use the iptables CT target to attach helpers instead.


===========================================Miner log===========================================
2015-01-01 00:00:15 Invalid config option --bitmain-freq-level: '' is not a number
2015-01-01 00:00:15 Open miner sn file /config/sn error
2015-01-01 00:00:15 Miner compile time: Wed Apr 27 15:19:27 CST 2022 type: Antminer BHB42XXX sn :
2015-01-01 00:00:16 This is fix-freq version
2015-01-01 00:00:16 Miner compile time: Wed Apr 27 15:19:27 CST 2022 type: Antminer BHB42XXX
2015-01-01 00:00:16 commit version: c039145 2022-04-26 19:43:08, build by: jenkins 2022-04-27 15:30:21
2015-01-01 00:00:16 opt_multi_version     = 1
2015-01-01 00:00:16 opt_bitmain_ab        = 1
2015-01-01 00:00:16 mid_auto_gen          = 1
2015-01-01 00:00:16 opt_bitmain_work_mode = 0
2015-01-01 00:00:16 port 439 already exported
2015-01-01 00:00:16 port 454 already exported
2015-01-01 00:00:16 port 440 already exported
2015-01-01 00:00:16 port 455 already exported
2015-01-01 00:00:16 port 441 already exported
2015-01-01 00:00:16 port 456 already exported
2015-01-01 00:00:16 port 438 already exported
2015-01-01 00:00:16 port 453 already exported
2015-01-01 00:00:16 port 446 already exported
2015-01-01 00:00:16 port 445 already exported
2015-01-01 00:00:16 Note: front fan is power on!
2015-01-01 00:00:16 Note: rear fan is power on!
2015-01-01 00:00:16 start the http log.
2015-01-01 00:00:16 httpListenThread start ret=0
2015-01-01 00:00:16 start listen on 6060 ...
2015-01-01 00:00:16 bad chain id = 3
2015-01-01 00:00:19 bad chain id = 3
2015-01-01 00:00:21 ==========================capability start==========================
2015-01-01 00:00:21 board num = 3
2015-01-01 00:00:21 board id = 0, chain num = 1
2015-01-01 00:00:21 	chain id = 0
2015-01-01 00:00:21 board id = 1, chain num = 1
2015-01-01 00:00:21 	chain id = 1
2015-01-01 00:00:21 board id = 2, chain num = 1
2015-01-01 00:00:21 	chain id = 2
2015-01-01 00:00:21 ==========================capability end============================
2015-01-01 00:00:21 chain num = 3
2015-01-01 00:00:21 skip loading levels for now
2022-10-03 17:22:31 load chain 0 eeprom data
2022-10-03 17:22:32 load chain 1 eeprom data
2022-10-03 17:22:32 load chain 2 eeprom data
2022-10-03 17:22:32 EEPROM error: CRC 1ST REGION
2022-10-03 17:22:32 got nothing
2022-10-03 17:22:33 load chain 2 eeprom data
2022-10-03 17:22:33 EEPROM error: CRC 1ST REGION
2022-10-03 17:22:33 got nothing
2022-10-03 17:22:34 load chain 2 eeprom data
2022-10-03 17:22:34 EEPROM error: CRC 1ST REGION
2022-10-03 17:22:34 got nothing
2022-10-03 17:22:34 Data load fail for chain 2.
2022-10-03 17:22:34 Sweep error string = J4:4.
2022-10-03 17:22:34 Fixture data load failed, exit.
2022-10-03 17:22:34 get board name failed for chain:0
2022-10-03 17:22:34 ERROR_SOC_INIT: basic init failed!
2022-10-03 17:22:34 stop_mining: basic init failed!
2022-10-03 17:22:34 ****power off hashboard****
2022-10-03 17:22:35 _bitmain_pic_disable_dc_dc_common failed! read_back_data[0] = 0xff, read_back_data[1] = 0xff
2022-10-03 17:22:35 _bitmain_pic_disable_dc_dc_common failed! read_back_data[0] = 0xff, read_back_data[1] = 0xff
2022-10-03 17:22:36 _bitmain_pic_disable_dc_dc_common failed! read_back_data[0] = 0xff, read_back_data[1] = 0xff