D3-Socket connection failed

 

The error message "Socket connection failed" has several possible causes. Please test as follows to determine the cause of the error on your miner:

 

Please download this firmware and load to the miner: https://shop.bitmain.com/support.htm?pid=00720170915192851224mJ36J1ap066E

 

1. In the Miner configuration screen check the pool URL very carefully. Any error, including spaces, can cause this error.

2. Confirm that your internet connection is stable. Network configurations or security settings in the router can cause this error.

3. Check the voltage on the front and back fans. If the front fan shows lower voltage switch the fans.

4. If the network is good then please disconnect all the hash boards from both the power supply unit and the controller. Reboot the miner with only the controller connected. If the error still appears then we need to replace the controller. 

5. If the error message does not appear with only the controller connected then please run the miner with one hash board at a time. If one of the hash boards is defective please create a repair ticket and return the hash board to us for repair: https://shop.bitmain.com/repairGuide

 

Have more questions? Submit a request

0 Comments

Article is closed for comments.