Scrapped machines will not be repaired




  • Jonathan2barros

    Hi, please, can you check again if the hashboard that you are reporting it's mine? the date of your report is earlier than the arrival of my hashboard.
    thank you and sorry for the inconvenience.

    Comment actions Permalink
  • stefansgoldbars

    I got a non working hashboard. I run my D3 for less then 24 hours when one of the 3 Hashboard showed a error message. I controlled the Temp. by turning the frequency down to 431 for a MH/s of 15'300 - so not overclocked (original setup by BITMAIN is frequency 537, so that it could reach the promised 19xxx MH/s) i made sure that it does not exceed 75 - 77 degree, the hashboard is not showing any damage, any burned parts or chips, all chips are in place - not one has fallen out and nothing is broken nor corroded/oxidized ...and BITMAIN is refusing to replace / repair it. They say that they void the warranty without having even had a look at the part...what a joke

    Comment actions Permalink

Article is closed for comments.